Commits · 60e537b95f2336dc598cb9ce49823316841ee3dd · parity / Mirrored projects / polkadot-sdk

Feb 22, 2024

Elastic scaling: use an assumed `CoreIndex` in `candidate-backing` (#3229) · 60e537b9

Andrei Sandu authored Feb 22, 2024



First step in implementing
https://github.com/paritytech/polkadot-sdk/issues/3144

### Summary of changes
- switch statement `Table` candidate mapping from `ParaId` to
`CoreIndex`
- introduce experimental `InjectCoreIndex`  node feature.
- determine and assume a `CoreIndex` for a candidate based on statement
validator index. If the signature is valid it means validator controls
the validator that index and we can easily map it to a validator
group/core.
- introduce a temporary provisioner fix until we fully enable elastic
scaling in the subystem. The fix ensures we don't fetch the same
backable candidate when calling `get_backable_candidate` for each core.

TODO:
- [x] fix backing tests
- [x] fix statement table tests
- [x] add new test

---------

Signed-off-by: Andrei Sandu <[email protected]>
Signed-off-by: alindima <[email protected]>
Co-authored-by: alindima <[email protected]>

60e537b9

Feb 21, 2024

Snowbridge - Test pallet order (#3381) · 5a06771e

Clara van Staden authored Feb 21, 2024

- Adds a test to check the correct digest for Snowbridge outbound
messages. For the correct digest to be in the block, the the
MessageQueue pallet should be configured after the EthereumOutbound
queue pallet. The added test fails if the EthereumOutbound is configured
after the MessageQueue pallet.
- Adds a helper method `run_to_block_with_finalize` to simulate the
block finalizing. The existing `run_to_block` method does not finalize
and so it cannot successfully test this condition.

Closes: https://github.com/paritytech/polkadot-sdk/issues/3208

---------

Co-authored-by: claravanstaden <Cats 4 life!>

5a06771e

Feb 20, 2024

Bump the known_good_semver group with 5 updates (#3397) · d50cf140

dependabot[bot] authored Feb 20, 2024



Bumps the known_good_semver group with 5 updates:

| Package | From | To |
| --- | --- | --- |
| [serde](https://github.com/serde-rs/serde) | `1.0.196` | `1.0.197` |
| [serde_json](https://github.com/serde-rs/json) | `1.0.113` | `1.0.114`
|
| [syn](https://github.com/dtolnay/syn) | `2.0.49` | `2.0.50` |
| [serde_yaml](https://github.com/dtolnay/serde-yaml) | `0.9.31` |
`0.9.32` |
| [serde_derive](https://github.com/serde-rs/serde) | `1.0.196` |
`1.0.197` |

Updates `serde` from 1.0.196 to 1.0.197
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/serde/releases">serde's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.197</h2>
<ul>
<li>Fix unused_imports warnings when compiled by rustc 1.78</li>
<li>Optimize code size of some Display impls (<a
href="https://redirect.github.com/serde-rs/serde/issues/2697">#2697</a>,
thanks <a
href="https://github.com/nyurik"><code>@nyurik</code></a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/serde/commit/5fa711d75d91173aafc6019e03cf8af6ac9ba7b2"><code>5fa711d</code></a>
Release 1.0.197</li>
<li><a
href="https://github.com/serde-rs/serde/commit/f5d8ae423aa195d3423029ff5a618266cc8ff9a5"><code>f5d8ae4</code></a>
Resolve prelude redundant import warnings</li>
<li><a
href="https://github.com/serde-rs/serde/commit/1d54973b928bd8708a4ad2d90fca1203367ff580"><code>1d54973</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2697">#2697</a>
from nyurik/format-str</li>
<li><a
href="https://github.com/serde-rs/serde/commit/b8fafefd8588f84af54329945fab701ec414281d"><code>b8fafef</code></a>
A few minor <code>write_str</code> optimizations and inlining</li>
<li><a
href="https://github.com/serde-rs/serde/commit/c42ebb8839fbd92dbda6729e8363c8d683f26306"><code>c42ebb8</code></a>
Update ui test suite to nightly-2024-02-12</li>
<li><a
href="https://github.com/serde-rs/serde/commit/9e680620b595724a6abfb8e785155d02482f911a"><code>9e68062</code></a>
Ignore incompatible_msrv clippy lint for conditionally compiled
code</li>
<li><a
href="https://github.com/serde-rs/serde/commit/846f865de2e94408e0edc6a2c6863c063cd234be"><code>846f865</code></a>
Ignore dead_code warnings in test</li>
<li>See full diff in <a
href="https://github.com/serde-rs/serde/compare/v1.0.196...v1.0.197">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_json` from 1.0.113 to 1.0.114
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/json/releases">serde_json's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.114</h2>
<ul>
<li>Fix unused_imports warnings when compiled by rustc 1.78</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/json/commit/e1b3a6d8a161ff5ec4865b487d148c17d0188e3e"><code>e1b3a6d</code></a>
Release 1.0.114</li>
<li><a
href="https://github.com/serde-rs/json/commit/6fb70262e894168ac631b2232a1b7b3a7781ebe5"><code>6fb7026</code></a>
Work around prelude redundant import warnings</li>
<li><a
href="https://github.com/serde-rs/json/commit/34a04c5f7febdf80e05743e38d5cb1880a83b6f6"><code>34a04c5</code></a>
Ignore incompatible_msrv clippy false positives in test</li>
<li><a
href="https://github.com/serde-rs/json/commit/ca05f69943e18d70c2219ea41fcb67f2849b7eed"><code>ca05f69</code></a>
Remove unused Float::is_sign_negative trait method</li>
<li>See full diff in <a
href="https://github.com/serde-rs/json/compare/v1.0.113...v1.0.114">compare
view</a></li>
</ul>
</details>
<br />

Updates `syn` from 2.0.49 to 2.0.50
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/syn/releases">syn's
releases</a>.</em></p>
<blockquote>
<h2>2.0.50</h2>
<ul>
<li>Fix unused_imports warnings when compiled by rustc 1.78</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/syn/commit/0dae01509e1dfc1734b0e8097c16338b56503242"><code>0dae015</code></a>
Release 2.0.50</li>
<li><a
href="https://github.com/dtolnay/syn/commit/2b493c34211a605a84eb5f1618e49818f8b654e6"><code>2b493c3</code></a>
Update location of Pat variant aliases</li>
<li><a
href="https://github.com/dtolnay/syn/commit/07a435df6739d47d54e933970eddfc6764bd519d"><code>07a435d</code></a>
Fix doc links now that crate::* is no longer imported</li>
<li><a
href="https://github.com/dtolnay/syn/commit/713f932b85698b1b2d561cc98e5b6f9643c9afde"><code>713f932</code></a>
Eliminate glob imports</li>
<li><a
href="https://github.com/dtolnay/syn/commit/6eb82a997589cf9c5b2bb36716443a19c4440c5e"><code>6eb82a9</code></a>
Eliminate glob imports from codegen</li>
<li><a
href="https://github.com/dtolnay/syn/commit/896a7306ee36a4c7dc96e1bf61e247e53df47179"><code>896a730</code></a>
Eliminate glob imports from examples</li>
<li><a
href="https://github.com/dtolnay/syn/commit/866c80ce2f39e8e2e723bb5440fdd58e4e1de3b6"><code>866c80c</code></a>
Update test suite to nightly-2024-02-18</li>
<li><a
href="https://github.com/dtolnay/syn/commit/d4b499e3907295a7173fbc6f8ca34388583795f6"><code>d4b499e</code></a>
Update test suite to nightly-2024-02-17</li>
<li><a
href="https://github.com/dtolnay/syn/commit/38956e60405920fdf856a0128a804460913c8c0c"><code>38956e6</code></a>
Update test suite to nightly-2024-02-16</li>
<li>See full diff in <a
href="https://github.com/dtolnay/syn/compare/2.0.49...2.0.50">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_yaml` from 0.9.31 to 0.9.32
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/serde-yaml/releases">serde_yaml's
releases</a>.</em></p>
<blockquote>
<h2>0.9.32</h2>
<ul>
<li>Fix unused_imports warnings when compiled by rustc 1.78</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/ea57d8cdeb6b2d0060aaeec6c934d0f494722765"><code>ea57d8c</code></a>
Release 0.9.32</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/a52b7ac3f42aad7f587409d2e431ed2fe5db7b31"><code>a52b7ac</code></a>
Resolve prelude redundant import warnings</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/9e0b8d337b1c19fe250454da3bce9fc12b6cd634"><code>9e0b8d3</code></a>
Replace curly quotes with ascii straight quotes</li>
<li>See full diff in <a
href="https://github.com/dtolnay/serde-yaml/compare/0.9.31...0.9.32">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_derive` from 1.0.196 to 1.0.197
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/serde/releases">serde_derive's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.197</h2>
<ul>
<li>Fix unused_imports warnings when compiled by rustc 1.78</li>
<li>Optimize code size of some Display impls (<a
href="https://redirect.github.com/serde-rs/serde/issues/2697">#2697</a>,
thanks <a
href="https://github.com/nyurik"><code>@nyurik</code></a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/serde/commit/5fa711d75d91173aafc6019e03cf8af6ac9ba7b2"><code>5fa711d</code></a>
Release 1.0.197</li>
<li><a
href="https://github.com/serde-rs/serde/commit/f5d8ae423aa195d3423029ff5a618266cc8ff9a5"><code>f5d8ae4</code></a>
Resolve prelude redundant import warnings</li>
<li><a
href="https://github.com/serde-rs/serde/commit/1d54973b928bd8708a4ad2d90fca1203367ff580"><code>1d54973</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2697">#2697</a>
from nyurik/format-str</li>
<li><a
href="https://github.com/serde-rs/serde/commit/b8fafefd8588f84af54329945fab701ec414281d"><code>b8fafef</code></a>
A few minor <code>write_str</code> optimizations and inlining</li>
<li><a
href="https://github.com/serde-rs/serde/commit/c42ebb8839fbd92dbda6729e8363c8d683f26306"><code>c42ebb8</code></a>
Update ui test suite to nightly-2024-02-12</li>
<li><a
href="https://github.com/serde-rs/serde/commit/9e680620b595724a6abfb8e785155d02482f911a"><code>9e68062</code></a>
Ignore incompatible_msrv clippy lint for conditionally compiled
code</li>
<li><a
href="https://github.com/serde-rs/serde/commit/846f865de2e94408e0edc6a2c6863c063cd234be"><code>846f865</code></a>
Ignore dead_code warnings in test</li>
<li>See full diff in <a
href="https://github.com/serde-rs/serde/compare/v1.0.196...v1.0.197">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

d50cf140

Externalize received fees checks from... · ff40310d

Branislav Kontur authored Feb 20, 2024

Externalize received fees checks from `receive_reserve_asset_deposited_from_different_consensus_works` (#3409)

Backport of patch-fix:
https://github.com/paritytech/polkadot-sdk/pull/3404

ff40310d

Feb 19, 2024

gossip-support: add unittests for update authorities (#3258) · 197c6cf9

Alexandru Gheorghe authored Feb 19, 2024



~The previous fix was actually incomplete because we update the
authorties only on the situation where we decided to reconnect because
we had a low connectivity issue. Now the problem is that
update_authority_ids use the list of connected peers, so on restart that
does contain anything, so calling immediately after
issue_connection_request won't detect all authorities, so we need to
also check every block as the comment said, but that did not match the
code.~

Actually the fix was correct the flow is follow if more than 1/3 of the
authorities can not be resolved we set last_failure and call
`ConnectToResolvedValidators`.

We will call UpdateAuthorities for all the authorities already connected
and for which we already know the address and for the ones that will
connect later on `PeerConnected` will have the AuthorityId field set,
because it is already known, so approval-distribution will update its
cache topology.

---------

Signed-off-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Alexander Samusev <[email protected]>

197c6cf9

Bump the known_good_semver group with 1 update (#3379) · 3168ed4d

dependabot[bot] authored Feb 19, 2024



Bumps the known_good_semver group with 1 update:
[clap](https://github.com/clap-rs/clap).

Updates `clap` from 4.5.0 to 4.5.1
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/releases">clap's
releases</a>.</em></p>
<blockquote>
<h2>v4.5.1</h2>
<h2>[4.5.1] - 2024-02-16</h2>
<h3>Fixes</h3>
<ul>
<li><em>(error)</em> Include suggestion to add <code>--</code> even if
there is a &quot;did you mean&quot; so long as <code>last</code> or
<code>trailing_var_arg</code> is used</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.5.1] - 2024-02-16</h2>
<h3>Fixes</h3>
<ul>
<li><em>(error)</em> Include suggestion to add <code>--</code> even if
there is a &quot;did you mean&quot; so long as <code>last</code> or
<code>trailing_var_arg</code> is used</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/0c01b5558de0a1a513a2af429981099e550d1a78"><code>0c01b55</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/08e0b5bde4b45567be98d12e7d394762fa8da6a4"><code>08e0b5b</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/f2c4e6ec740cce29cea3fd7232e4d2716f089fc2"><code>f2c4e6e</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5359">#5359</a>
from poliorcetics/ab/push-szymvyzpmnqx</li>
<li><a
href="https://github.com/clap-rs/clap/commit/e782775229081697e47d340a155d6b087eeb46f8"><code>e782775</code></a>
fix(complete): Handle newlines in command/arg descriptions</li>
<li><a
href="https://github.com/clap-rs/clap/commit/fba7c8597bf3028400d6f6a22d83cedb7a2bd5a5"><code>fba7c85</code></a>
test(complete): Show newline issue</li>
<li><a
href="https://github.com/clap-rs/clap/commit/8a7a13a5618cfdc4ff328624a5266e7b4d88649a"><code>8a7a13a</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/7b3a3e1e5eee57fc37110343b980cbe8170d20ad"><code>7b3a3e1</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/7b624ca74336f6f14f01007b9039990d53acda0f"><code>7b624ca</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5356">#5356</a>
from epage/escape</li>
<li><a
href="https://github.com/clap-rs/clap/commit/446328a8d3cdaac28884bf8fdfcc85f35c8b5134"><code>446328a</code></a>
fix(error): Include -- in more cases</li>
<li><a
href="https://github.com/clap-rs/clap/commit/7de6df878238ca8e3d9723bb9650f7fe9470d8bd"><code>7de6df8</code></a>
test(error): Show existing last behavior</li>
<li>Additional commits viewable in <a
href="https://github.com/clap-rs/clap/compare/clap_complete-v4.5.0...clap_complete-v4.5.1">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=clap&package-manager=cargo&previous-version=4.5.0&new-version=4.5.1)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

3168ed4d

Feb 18, 2024
- Make `sp-keystore` `no_std`-compatible and fix the `build-runtimes-polkavm` CI job (#3363) · b179b832
  Koute authored Feb 19, 2024
```
Fixes https://github.com/paritytech/polkadot-sdk/issues/3352
```
  b179b832
Feb 17, 2024

rpc server: add rate limiting middleware (#3301) · de73dd9a

Niklas Adolfsson authored Feb 17, 2024

Add RPC server rate limiting which can be utilized by the CLI
`--rpc-rate-limit <calls/per minute>`

Resolves first part of
https://github.com/paritytech/polkadot-sdk/issues/3028

//cc @PierreBesson @kogeler

  you might be interested in this one

---------

Co-authored-by: James Wilson <[email protected]>
Co-authored-by: Xiliang Chen <[email protected]>

de73dd9a

Feb 16, 2024

Add broker pallet to `coretime-westend` (#3272) · 99234440

Dónal Murray authored Feb 16, 2024



This brings functionality to Westend's Coretime Chain runtime, where
previously it was not much more than a shell.

It is assumed that the Coretime pallet will have the same index in the
Westend runtime as it does in Rococo for the runtime calls.

TODO:
- [x] Generate chainspec
- [x] Regenerate weights
- [x] Check hardcoded RuntimeCall weights against relay weights for
transacts

Aura key generation: https://github.com/paritytech/devops/issues/2725

---------

Co-authored-by: command-bot <>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Anton Vilhelm Ásgeirsson <[email protected]>

99234440

Bump the known_good_semver group with 6 updates (#3347) · 4b484e6a

dependabot[bot] authored Feb 16, 2024



Bumps the known_good_semver group with 6 updates:

| Package | From | To |
| --- | --- | --- |
| [serde](https://github.com/serde-rs/serde) | `1.0.195` | `1.0.196` |
| [serde_json](https://github.com/serde-rs/json) | `1.0.111` | `1.0.113`
|
| [clap](https://github.com/clap-rs/clap) | `4.4.18` | `4.5.0` |
| [syn](https://github.com/dtolnay/syn) | `2.0.48` | `2.0.49` |
| [serde_yaml](https://github.com/dtolnay/serde-yaml) | `0.9.30` |
`0.9.31` |
| [serde_derive](https://github.com/serde-rs/serde) | `1.0.195` |
`1.0.196` |

Updates `serde` from 1.0.195 to 1.0.196
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/serde/releases">serde's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.196</h2>
<ul>
<li>Improve formatting of &quot;invalid type&quot; error messages
involving floats (<a
href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/serde/commit/ede9762a583c3cc3b87c10a53551828fad339525"><code>ede9762</code></a>
Release 1.0.196</li>
<li><a
href="https://github.com/serde-rs/serde/commit/d438c2d67bf30e3edab31c2272c4829c12cf4cb5"><code>d438c2d</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>
from dtolnay/decimalpoint</li>
<li><a
href="https://github.com/serde-rs/serde/commit/bef110b92a171ac568a47339f5bd97938a8c9da2"><code>bef110b</code></a>
Format Unexpected::Float with decimal point</li>
<li><a
href="https://github.com/serde-rs/serde/commit/b971ef11d1b53da7673e0c8199e87509c003c1a8"><code>b971ef1</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2681">#2681</a>
from dtolnay/workspacedeps</li>
<li><a
href="https://github.com/serde-rs/serde/commit/29d9f693996d199748136d5561a971ed68626724"><code>29d9f69</code></a>
Fix workspace.dependencies default-features future compat warning</li>
<li><a
href="https://github.com/serde-rs/serde/commit/aecb4083bde754155752f5d7d442b64eb7dc636f"><code>aecb408</code></a>
Sort workspace dependencies</li>
<li><a
href="https://github.com/serde-rs/serde/commit/1c675ab3a38e46df4e62465800970f8b20a2055d"><code>1c675ab</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2678">#2678</a>
from rodoufu/workspaceDependencies</li>
<li><a
href="https://github.com/serde-rs/serde/commit/dd619630a337139424725697ccd9a9f7596a2d3a"><code>dd61963</code></a>
Adding workspace dependencies</li>
<li><a
href="https://github.com/serde-rs/serde/commit/111803ab0768d010c606f2fc0d0add12750d5eef"><code>111803a</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2673">#2673</a>
from Sky9x/msrv-badge</li>
<li><a
href="https://github.com/serde-rs/serde/commit/0024f74f34fbbdc44a7b22457faebe36c5cbe7f8"><code>0024f74</code></a>
Use shields.io's MSRV badges</li>
<li>See full diff in <a
href="https://github.com/serde-rs/serde/compare/v1.0.195...v1.0.196">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_json` from 1.0.111 to 1.0.113
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/json/releases">serde_json's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.113</h2>
<ul>
<li>Add <code>swap_remove</code> and <code>shift_remove</code> methods
on Map (<a
href="https://redirect.github.com/serde-rs/json/issues/1109">#1109</a>)</li>
</ul>
<h2>v1.0.112</h2>
<ul>
<li>Improve formatting of &quot;invalid type&quot; error messages
involving floats (<a
href="https://redirect.github.com/serde-rs/json/issues/1107">#1107</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/json/commit/09d865b34b9701be52764dc9bf571b1a16e9d3dc"><code>09d865b</code></a>
Release 1.0.113</li>
<li><a
href="https://github.com/serde-rs/json/commit/5aeab4eaf69d7959f013f8081865c264d6c00551"><code>5aeab4e</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1109">#1109</a>
from serde-rs/remove</li>
<li><a
href="https://github.com/serde-rs/json/commit/ca3c2ca3696cab79b8b279be7569ee1647250f1e"><code>ca3c2ca</code></a>
Add swap_remove and shift_remove methods on Map</li>
<li><a
href="https://github.com/serde-rs/json/commit/7fece969e3b480ec620419d65c2aeb08776bebcb"><code>7fece96</code></a>
Release 1.0.112</li>
<li><a
href="https://github.com/serde-rs/json/commit/6a6d2bbd9e8b8bd72573b863f12a4ec991f33232"><code>6a6d2bb</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1107">#1107</a>
from serde-rs/unexpectedfloat</li>
<li><a
href="https://github.com/serde-rs/json/commit/83d7bad54ba5db3a44198d6df0ff2e81621683fa"><code>83d7bad</code></a>
Format f64 in error messages using ryu</li>
<li><a
href="https://github.com/serde-rs/json/commit/107c2d1c42817f0d71f07a4d5b0ea2f29dbce8b8"><code>107c2d1</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1106">#1106</a>
from serde-rs/invalidvalue</li>
<li><a
href="https://github.com/serde-rs/json/commit/62ca3e4c01c2e62cd5c2a32e9104f386e5ce7808"><code>62ca3e4</code></a>
Handle Unexpected::Unit in Error::invalid_value</li>
<li><a
href="https://github.com/serde-rs/json/commit/296fafb8f32e8442ef8e4d5725c15ffca726b288"><code>296fafb</code></a>
Factor out JSON-specific Display impl for serde::de::Unexpected</li>
<li><a
href="https://github.com/serde-rs/json/commit/e56cc696bd7c112e5dd4ccfa23d094c3a1c1c1ff"><code>e56cc69</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1105">#1105</a>
from keienWang/master</li>
<li>Additional commits viewable in <a
href="https://github.com/serde-rs/json/compare/v1.0.111...v1.0.113">compare
view</a></li>
</ul>
</details>
<br />

Updates `clap` from 4.4.18 to 4.5.0
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.5.0] - 2024-02-08</h2>
<h3>Compatibility</h3>
<ul>
<li>Update MSRV to 1.74</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/a751c5fe65cd33cb09e85ff3039b4fd0182cdb6e"><code>a751c5f</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/9ec6c942b81c370a8c14652e42295933244555ac"><code>9ec6c94</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/0735119775c2d27fef6b3c232cb9ef2fcbbd963f"><code>0735119</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/c4d3959506f5068f86ffb7ab34b622bd2da40dd8"><code>c4d3959</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5344">#5344</a>
from epage/encode</li>
<li><a
href="https://github.com/clap-rs/clap/commit/f750e577789e1dd34c6950d8c8fe16d1bfd1f49c"><code>f750e57</code></a>
fix(lex): Use new-ish OsStr API</li>
<li><a
href="https://github.com/clap-rs/clap/commit/1d9a554cdfddffcb92d197706b9720e2760cb443"><code>1d9a554</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5343">#5343</a>
from epage/msrv</li>
<li><a
href="https://github.com/clap-rs/clap/commit/4b45d361b1b96eb1f37b7d1db2684203ca828a94"><code>4b45d36</code></a>
chore: Update MSRV to 1.74</li>
<li><a
href="https://github.com/clap-rs/clap/commit/55b1f945157d4d0e480dea6c492e04d0b541088a"><code>55b1f94</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5342">#5342</a>
from epage/divan</li>
<li><a
href="https://github.com/clap-rs/clap/commit/ea77b98da3f321069ae136a241a2d266c2b28bd7"><code>ea77b98</code></a>
test(complete): Make it order independent</li>
<li><a
href="https://github.com/clap-rs/clap/commit/b0fea2bac60819bdb042e10c032817fded67f815"><code>b0fea2b</code></a>
test(bench): Switch to divan</li>
<li>Additional commits viewable in <a
href="https://github.com/clap-rs/clap/compare/v4.4.18...clap_complete-v4.5.0">compare
view</a></li>
</ul>
</details>
<br />

Updates `syn` from 2.0.48 to 2.0.49
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/syn/releases">syn's
releases</a>.</em></p>
<blockquote>
<h2>2.0.49</h2>
<ul>
<li>Improve error location when parsing from an empty string literal
using <code>LitStr::parse</code> (<a
href="https://redirect.github.com/dtolnay/syn/issues/1590">#1590</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/syn/commit/e64c0636042bcd8cf56f9e6c3e828a49cb434649"><code>e64c063</code></a>
Release 2.0.49</li>
<li><a
href="https://github.com/dtolnay/syn/commit/981359c5f46f25f3db42d1b341cc607f634688e7"><code>981359c</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1590">#1590</a>
from dtolnay/streof</li>
<li><a
href="https://github.com/dtolnay/syn/commit/51298d40a447b9e5b3cd8c898c2ea9d24b31cd6d"><code>51298d4</code></a>
Improve error location at eof in LitStr::parse</li>
<li><a
href="https://github.com/dtolnay/syn/commit/270c63384a9d891f65880a03a5a92f0bf4605bbf"><code>270c633</code></a>
Update test suite to nightly-2024-02-13</li>
<li><a
href="https://github.com/dtolnay/syn/commit/dc9cf16b9b0601d2d393d059c46a8f8e0220cc21"><code>dc9cf16</code></a>
Remove FilterAttrs trait when unused</li>
<li><a
href="https://github.com/dtolnay/syn/commit/7dcfac79eda716fa806d68cc0aa811f3be717dc0"><code>7dcfac7</code></a>
Ignore dead_code warning in test</li>
<li><a
href="https://github.com/dtolnay/syn/commit/98318441089f9a9bb596fc010ed14c3b593d4bda"><code>9831844</code></a>
Update signature of Emitter::emit_diagnostic in nightly-2024-02-07</li>
<li><a
href="https://github.com/dtolnay/syn/commit/9e8033f63da93dfb6a3e698449c6edff5e56727d"><code>9e8033f</code></a>
Update test suite to nightly-2024-02-07</li>
<li><a
href="https://github.com/dtolnay/syn/commit/cb3348cd94be50995054796facdfa055b6e0e9e8"><code>cb3348c</code></a>
Update test suite to nightly-2024-01-23</li>
<li><a
href="https://github.com/dtolnay/syn/commit/15b9dbcd67bc56f3da7d33bbede46f7380fc7164"><code>15b9dbc</code></a>
Update test suite to nightly-2024-01-19</li>
<li>Additional commits viewable in <a
href="https://github.com/dtolnay/syn/compare/2.0.48...2.0.49">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_yaml` from 0.9.30 to 0.9.31
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/serde-yaml/releases">serde_yaml's
releases</a>.</em></p>
<blockquote>
<h2>0.9.31</h2>
<ul>
<li>Add <code>swap_remove</code> and <code>shift_remove</code> methods
on Mapping (<a
href="https://redirect.github.com/dtolnay/serde-yaml/issues/408">#408</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/2a77483b23897115bdd69af32ae34d593268d555"><code>2a77483</code></a>
Release 0.9.31</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/d8d1a839cf42ef4627c66bebd743f5fecd24e3ed"><code>d8d1a83</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/serde-yaml/issues/408">#408</a>
from dtolnay/remove</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/f8a99a496836ccfa6c547af9136986d13011be98"><code>f8a99a4</code></a>
Add swap_remove and shift_remove methods on Mapping</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/8b26413e3307e39329dc68a96b065058aec38f9a"><code>8b26413</code></a>
Work around dead_code warning in tests</li>
<li>See full diff in <a
href="https://github.com/dtolnay/serde-yaml/compare/0.9.30...0.9.31">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_derive` from 1.0.195 to 1.0.196
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/serde/releases">serde_derive's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.196</h2>
<ul>
<li>Improve formatting of &quot;invalid type&quot; error messages
involving floats (<a
href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/serde/commit/ede9762a583c3cc3b87c10a53551828fad339525"><code>ede9762</code></a>
Release 1.0.196</li>
<li><a
href="https://github.com/serde-rs/serde/commit/d438c2d67bf30e3edab31c2272c4829c12cf4cb5"><code>d438c2d</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>
from dtolnay/decimalpoint</li>
<li><a
href="https://github.com/serde-rs/serde/commit/bef110b92a171ac568a47339f5bd97938a8c9da2"><code>bef110b</code></a>
Format Unexpected::Float with decimal point</li>
<li><a
href="https://github.com/serde-rs/serde/commit/b971ef11d1b53da7673e0c8199e87509c003c1a8"><code>b971ef1</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2681">#2681</a>
from dtolnay/workspacedeps</li>
<li><a
href="https://github.com/serde-rs/serde/commit/29d9f693996d199748136d5561a971ed68626724"><code>29d9f69</code></a>
Fix workspace.dependencies default-features future compat warning</li>
<li><a
href="https://github.com/serde-rs/serde/commit/aecb4083bde754155752f5d7d442b64eb7dc636f"><code>aecb408</code></a>
Sort workspace dependencies</li>
<li><a
href="https://github.com/serde-rs/serde/commit/1c675ab3a38e46df4e62465800970f8b20a2055d"><code>1c675ab</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2678">#2678</a>
from rodoufu/workspaceDependencies</li>
<li><a
href="https://github.com/serde-rs/serde/commit/dd619630a337139424725697ccd9a9f7596a2d3a"><code>dd61963</code></a>
Adding workspace dependencies</li>
<li><a
href="https://github.com/serde-rs/serde/commit/111803ab0768d010c606f2fc0d0add12750d5eef"><code>111803a</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2673">#2673</a>
from Sky9x/msrv-badge</li>
<li><a
href="https://github.com/serde-rs/serde/commit/0024f74f34fbbdc44a7b22457faebe36c5cbe7f8"><code>0024f74</code></a>
Use shields.io's MSRV badges</li>
<li>See full diff in <a
href="https://github.com/serde-rs/serde/compare/v1.0.195...v1.0.196">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

4b484e6a

Feb 15, 2024
- xcm-emulator tests: remove dependency on polkadot-service full-node (#3323) · f6048604
  Adrian Catangiu authored Feb 15, 2024
```
Don't bring the full polkadot node (with all its dependencies) in
`emulated-integration-tests-common` crate and deps.
```
  f6048604
Feb 14, 2024

Use simple-mermaid from crates-io (#3304) · 5cfc05d5

Oliver Tale-Yazdi authored Feb 14, 2024



Re https://github.com/paritytech/polkadot-sdk/issues/2922

Changes:
- Use crates-io version of simple-mermaid as
[v0.1.1](https://github.com/glueball/simple-mermaid/releases/tag/v0.1.1)
supports no-std.
- Remove from `frame` since i did not see it used.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

5cfc05d5

rpc: bump jsonrpsee v0.22 and fix race in `rpc v2 chain_head` (#3230) · c7c4fe01

Niklas Adolfsson authored Feb 14, 2024

Close #2992 

Breaking changes:
- rpc server grafana metric `substrate_rpc_requests_started` is removed
(not possible to implement anymore)
- rpc server grafana metric `substrate_rpc_requests_finished` is removed
(not possible to implement anymore)
- rpc server ws ping/pong not ACK:ed within 30 seconds more than three
times then the connection will be closed

Added
- rpc server grafana metric `substrate_rpc_sessions_time` is added to
get the duration for each websocket session

c7c4fe01

Add XCM documentation to the sdk docs (#2628) · 5a50b8b8

Francisco Aguirre authored Feb 14, 2024



I added a small documentation for XCM in the context of the polkadot SDK

---------

Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Keith Yeung <[email protected]>

5a50b8b8

Feb 13, 2024

Bump once_cell from 1.18.0 to 1.19.0 (#3217) · b79bf4fb

dependabot[bot] authored Feb 13, 2024



Bumps [once_cell](https://github.com/matklad/once_cell) from 1.18.0 to
1.19.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/matklad/once_cell/blob/master/CHANGELOG.md">once_cell's
changelog</a>.</em></p>
<blockquote>
<h2>1.19.0</h2>
<ul>
<li>Use <code>portable-atomic</code> instead of
<code>atomic-polyfill</code>, <a
href="https://redirect.github.com/matklad/once_cell/pull/251">#251</a>.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/matklad/once_cell/commit/c48d3c2c01de926228aea2ac1d03672b4ce160c1"><code>c48d3c2</code></a>
Merge pull request <a
href="https://redirect.github.com/matklad/once_cell/issues/251">#251</a>
from taks/portable-atomic</li>
<li><a
href="https://github.com/matklad/once_cell/commit/8211d807891b9b1ccae3d83cafa582b6b73208a7"><code>8211d80</code></a>
Fix CI</li>
<li><a
href="https://github.com/matklad/once_cell/commit/2715aa9896ed6d0e810d350e6db4e0c5076a9df9"><code>2715aa9</code></a>
v1.19.0</li>
<li><a
href="https://github.com/matklad/once_cell/commit/dffcae4440f459184a345042a57dea26693b4c65"><code>dffcae4</code></a>
Fix CI</li>
<li><a
href="https://github.com/matklad/once_cell/commit/de4cd9db5362123997baa9b40a015024b67b65a3"><code>de4cd9d</code></a>
Revert atomic-polyfill feature</li>
<li><a
href="https://github.com/matklad/once_cell/commit/e26736f1f785f2c05f54d857b2876688f3fa5702"><code>e26736f</code></a>
Fix CI</li>
<li><a
href="https://github.com/matklad/once_cell/commit/5f88676dd00a6648578b74e1b018f4c944d0a93e"><code>5f88676</code></a>
Use portable_atomic instead of atomic-polyfill</li>
<li><a
href="https://github.com/matklad/once_cell/commit/874f9373abd7feaf923a3b3c34bfb3383529c671"><code>874f937</code></a>
clarify that MSRV does bump the minor version</li>
<li><a
href="https://github.com/matklad/once_cell/commit/3cd65494663f003b9b2e0be5b37b3426e543f72a"><code>3cd6549</code></a>
Merge <a
href="https://redirect.github.com/matklad/once_cell/issues/245">#245</a></li>
<li><a
href="https://github.com/matklad/once_cell/commit/a2eabc917bf4309bc9d492be92d892176da4ecf4"><code>a2eabc9</code></a>
Add <code>--generate-link-to-definition</code> option when building on
docs.rs</li>
<li>Additional commits viewable in <a
href="https://github.com/matklad/once_cell/compare/v1.18.0...v1.19.0">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=once_cell&package-manager=cargo&previous-version=1.18.0&new-version=1.19.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

b79bf4fb

Fix compilation on latest nightly because of `stdsimd` (#3296) · 349132f0
Bastian Köcher authored Feb 13, 2024
```
We need to bump `ahash` to make it compile again.

Closes: https://github.com/paritytech/polkadot-sdk/issues/3269
```
349132f0

Feb 12, 2024

rpc-v2/tx: Implement `transaction_unstable_broadcast` and `transaction_unstable_stop` (#3079) · bde0bbe5

Alexandru Vasile authored Feb 12, 2024



This PR implements the
[transaction_unstable_broadcast](https://github.com/paritytech/json-rpc-interface-spec/blob/main/src/api/transaction_unstable_broadcast.md)
and
[transaction_unstable_stop](https://github.com/paritytech/json-rpc-interface-spec/blob/main/src/api/transaction_unstable_stop.md).


The
[transaction_unstable_broadcast](https://github.com/paritytech/json-rpc-interface-spec/blob/main/src/api/transaction_unstable_broadcast.md)
submits the provided transaction at the best block of the chain.
If the transaction is dropped or declared invalid, the API tries to
resubmit the transaction at the next available best block.

### Broadcasting 
The broadcasting operation continues until either:

- the user called `transaction_unstable_stop` with the operation ID that
identifies the broadcasting operation
- the transaction state is one of the following: 
  - Finalized: the transaction is part of the chain
- FinalizedTimeout: we have waited for 256 finalized blocks and timedout
  - Usurped the transaction has been replaced in the tx pool
  
The broadcasting retires to submit the transaction when the transaction
state is:
- Invalid: the transaction might become valid at a later time
- Dropped: the transaction pool's capacity is full at the moment, but
might clear when other transactions are finalized/dropped

### Stopping

The `transaction_unstable_broadcast` spawns an abortable future and
tracks the abort handler.
When the
[transaction_unstable_stop](https://github.com/paritytech/json-rpc-interface-spec/blob/main/src/api/transaction_unstable_stop.md)
is called with a valid operation ID; the abort handler of the
corresponding `transaction_unstable_broadcast` future is called. This
behavior ensures the broadcast future is finishes on the next polling.
When the `transaction_unstable_stop` is called with an invalid operation
ID, an invalid jsonrpc specific error object is returned.


### Testing

This PR adds the testing harness of the transaction API and validates
two basic scenarios:
- transaction enters and exits the transaction pool
- transaction stop returns appropriate values when called with valid and
invalid operation IDs


Closes: https://github.com/paritytech/polkadot-sdk/issues/3039

Note that the API should be enabled after:
https://github.com/paritytech/polkadot-sdk/issues/3084.

cc @paritytech/subxt-team

---------

Signed-off-by: Alexandru Vasile <[email protected]>
Co-authored-by: Sebastian Kunert <[email protected]>

bde0bbe5

Feb 08, 2024

[FRAME] Parameters pallet (#2061) · e53ebd8c

Oliver Tale-Yazdi authored Feb 08, 2024



Closes #169  

Fork of the `orml-parameters-pallet` as introduced by
https://github.com/open-web3-stack/open-runtime-module-library/pull/927
(cc @xlc)
It greatly changes how the macros work, but keeps the pallet the same.
The downside of my code is now that it does only support constant keys
in the form of types, not value-bearing keys.
I think this is an acceptable trade off, give that it can be used by
*any* pallet without any changes.

The pallet allows to dynamically set parameters that can be used in
pallet configs while also restricting the updating on a per-key basis.
The rust-docs contains a complete example.

Changes:
- Add `parameters-pallet`
- Use in the kitchensink as demonstration
- Add experimental attribute to define dynamic params in the runtime.
- Adding a bunch of traits to `frame_support::traits::dynamic_params`
that can be re-used by the ORML macros

## Example

First to define the parameters in the runtime file. The syntax is very
explicit about the codec index and errors if there is no.
```rust
#[dynamic_params(RuntimeParameters, pallet_parameters::Parameters::<Runtime>))]
pub mod dynamic_params {
	use super::*;

	#[dynamic_pallet_params]
	#[codec(index = 0)]
	pub mod storage {
		/// Configures the base deposit of storing some data.
		#[codec(index = 0)]
		pub static BaseDeposit: Balance = 1 * DOLLARS;

		/// Configures the per-byte deposit of storing some data.
		#[codec(index = 1)]
		pub static ByteDeposit: Balance = 1 * CENTS;
	}

	#[dynamic_pallet_params]
	#[codec(index = 1)]
	pub mod contracts {
		#[codec(index = 0)]
		pub static DepositPerItem: Balance = deposit(1, 0);

		#[codec(index = 1)]
		pub static DepositPerByte: Balance = deposit(0, 1);
	}
}
```

Then the pallet is configured with the aggregate:  
```rust
impl pallet_parameters::Config for Runtime {
	type AggregratedKeyValue = RuntimeParameters;
	type AdminOrigin = EnsureRootWithSuccess<AccountId, ConstBool<true>>;
	...
}
```

And then the parameters can be used in a pallet config:
```rust
impl pallet_preimage::Config for Runtime {
	type DepositBase = dynamic_params::storage::DepositBase;
}
```

A custom origin an be defined like this:  
```rust
pub struct DynamicParametersManagerOrigin;

impl EnsureOriginWithArg<RuntimeOrigin, RuntimeParametersKey> for DynamicParametersManagerOrigin {
	type Success = ();

	fn try_origin(
		origin: RuntimeOrigin,
		key: &RuntimeParametersKey,
	) -> Result<Self::Success, RuntimeOrigin> {
		match key {
			RuntimeParametersKey::Storage(_) => {
				frame_system::ensure_root(origin.clone()).map_err(|_| origin)?;
				return Ok(())
			},
			RuntimeParametersKey::Contract(_) => {
				frame_system::ensure_root(origin.clone()).map_err(|_| origin)?;
				return Ok(())
			},
		}
	}

	#[cfg(feature = "runtime-benchmarks")]
	fn try_successful_origin(_key: &RuntimeParametersKey) -> Result<RuntimeOrigin, ()> {
		Ok(RuntimeOrigin::Root)
	}
}
```

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Nikhil Gupta <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: command-bot <>

e53ebd8c

Fixes `TotalValueLocked` out of sync in nomination pools (#3052) · aac07af0

Gonçalo Pestana authored Feb 08, 2024

The `TotalLockedValue` storage value in nomination pools pallet may get
out of sync if the staking pallet does implicit withdrawal of unlocking
chunks belonging to a bonded pool stash. This fix is based on a new
method in the `OnStakingUpdate` traits, `on_withdraw`, which allows the
nomination pools pallet to adjust the `TotalLockedValue` every time
there is an implicit or explicit withdrawal from a bonded pool's stash.

This PR also adds a migration that checks and updates the on-chain TVL
if it got out of sync due to the bug this PR fixes.

**Changes to `trait OnStakingUpdate`**

In order for staking to notify the nomination pools pallet that chunks
where withdrew, we add a new method, `on_withdraw` to the
`OnStakingUpdate` trait. The nomination pools pallet filters the
withdraws that are related to bonded pool accounts and updates the
`TotalValueLocked` accordingly.

**Others**
- Adds try-state checks to the EPM/staking e2e tests
- Adds tests for auto withdrawing in the context of nomination pools

**To-do**
- [x] check if we need a migration to fix the current `TotalValueLocked`
(run try-runtime)
- [x] migrations to fix the current on-chain TVL value 

 ✅ **Kusama**:
```
TotalValueLocked: 99.4559 kKSM
TotalValueLocked (calculated) 99.4559 kKSM
```
⚠

️ **Westend**:
```
TotalValueLocked: 18.4060 kWND
TotalValueLocked (calculated) 18.4050 kWND
```
**Polkadot**: TVL not released yet.

Closes https://github.com/paritytech/polkadot-sdk/issues/3055

---------

Co-authored-by: command-bot <>
Co-authored-by: Ross Bulat <[email protected]>
Co-authored-by: Dónal Murray <[email protected]>

aac07af0

`bench pallet`: only require `Hash` instead of `Block` (#3244) · c36c51ca

Oliver Tale-Yazdi authored Feb 08, 2024



Preparation for https://github.com/paritytech/polkadot-sdk/issues/2664

Changes:
- Only require `Hash` instead of `Block` for the benchmarking
- Refactor DB types to do the same

## Integration

This breaking change can easily be integrated into your node via:  
```patch
- cmd.run::<Block, ()>(config)
+ cmd.run::<HashingFor<Block>, ()>(config)
```

Status: waiting for CI checks

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: cheme <[email protected]>

c36c51ca

Make BEEFY client keystore generic over BEEFY `AuthorityId` type (#2258) · 0a94124d

drskalman authored Feb 08, 2024



This is the significant step to make BEEFY client able to handle both
ECDSA and (ECDSA, BLS) type signature. The idea is having BEEFY Client
generic on crypto types makes migration to new types smoother.

This makes the BEEFY Keystore generic over AuthorityId and extends its
tests to cover the case when the AuthorityId is of type (ECDSA,
BLS12-377)

---------

Co-authored-by: Davide Galassi <[email protected]>
Co-authored-by: Robert Hambrock <[email protected]>

0a94124d

Add try_state and integrity_test to XCM simulator fuzzer (#3222) · 84d89e37

Louis Merlin authored Feb 08, 2024

This adds `try_state()` and `integrity_test()` to the four runtimes of
the XCM-simulator fuzzer.

With this, we are able to stress-test [message-queue's
try_state](https://github.com/paritytech/polkadot-sdk/blob/7df1ae3b/substrate/frame/message-queue/src/lib.rs#L1245-L1347).

This also adds the `Transact` block-listing from #2424 to avoid
false-positives.

Thank you @ggwpez for the help with the runtime configurations.

84d89e37

Feb 06, 2024

Build more runtimes targeting PolkaVM (#3209) · 402b64ca

Koute authored Feb 06, 2024

This PR improves compatibility with RISC-V and PolkaVM, allowing more
runtimes to successfully compile.

In particular, it makes the following changes:

- The `sp-mmr-primitives` and `sp-consensus-beefy` crates
unconditionally required an `std`-only dependency; now they only require
those dependencies when the `std` feature is actually enabled. (Our
RISC-V target is, unlike WASM, a true `no_std` target where you can't
accidentally use stuff from `std` anymore.)
- One of our dependencies (the `bitvec` trace) uses a crate called
`radium` which doesn't compile under RISC-V due to incomplete
autodetection logic in their `build.rs` file. The good news is that this
is already fixed in the newest upstream version of `radium`, and the
newest version of `bitvec` uses it. The bad news is that the newest
version of `bitvec` is not currently released on crates.io, so we can't
use it. I've [created an
issue](https://github.com/ferrilab/ferrilab/issues/5) asking for a new
release, but in the meantime I forked the currently used `radium` 0.7,
[fixed the faulty
logic](https://github.com/paritytech/radium-0.7-fork/commit/ed66c8a294b138c67f93499644051d97d4c7fbda)
and used cargo's patching capabilities to use it for the RISC-V runtime
builds. This might be a little hacky, but it is the least intrusive way
to fix the problem, doesn't affect WASM builds at all, and we can
trivially remove it once a new `bitvec` is released.
- The new runtimes are added to the CI to make sure their compilation
doesn't break.

402b64ca

Feb 05, 2024

Bump indicatif from 0.17.6 to 0.17.7 (#3200) · 53f615de

dependabot[bot] authored Feb 05, 2024



Bumps [indicatif](https://github.com/console-rs/indicatif) from 0.17.6
to 0.17.7.
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/console-rs/indicatif/commit/0c037edc86449d84aa457d7d5db80b4166c18d6b"><code>0c037ed</code></a>
Bump version to 0.17.7 (<a
href="https://redirect.github.com/console-rs/indicatif/issues/589">#589</a>)</li>
<li><a
href="https://github.com/console-rs/indicatif/commit/44610121c8c0343428c12992a5bbf21255d4120b"><code>4461012</code></a>
Fix attempt to subtract with overflow (<a
href="https://redirect.github.com/console-rs/indicatif/issues/582">#582</a>)
(<a
href="https://redirect.github.com/console-rs/indicatif/issues/586">#586</a>)</li>
<li><a
href="https://github.com/console-rs/indicatif/commit/257d3ecc39f60a366bde98c11c4c703f91d53347"><code>257d3ec</code></a>
Bump actions/checkout from 3 to 4</li>
<li><a
href="https://github.com/console-rs/indicatif/commit/40b40d29b6d06ae18c40b829f77e9c43bcebd7af"><code>40b40d2</code></a>
fix unnecessary vec! lint instances</li>
<li><a
href="https://github.com/console-rs/indicatif/commit/a5a8524b4a62ac97229df5beeeff55c928e051fe"><code>a5a8524</code></a>
Tick ProgressTrackers before drawing</li>
<li><a
href="https://github.com/console-rs/indicatif/commit/75fca29bdb9e1164092d2b40d46d9b9c3d9581f1"><code>75fca29</code></a>
Add scheduled CI runs every week</li>
<li><a
href="https://github.com/console-rs/indicatif/commit/c0ea468ac3bd7ab9abab86a3fd3b251f7cef83b8"><code>c0ea468</code></a>
Upgrade to 2021 edition</li>
<li><a
href="https://github.com/console-rs/indicatif/commit/73a67f8e517c64f919ce51ce62e7c5bf3cb95974"><code>73a67f8</code></a>
Bump MSRV to 1.63 for tokio 1.30</li>
<li><a
href="https://github.com/console-rs/indicatif/commit/de090172485c7638a016b984e0c7c54e40919d34"><code>de09017</code></a>
Reorder Cargo metadata fields</li>
<li><a
href="https://github.com/console-rs/indicatif/commit/cee6fd4fcf85c4eda3a6e5dfb555f8a9c6c62edd"><code>cee6fd4</code></a>
Fix a potential overflow with a saturating add.</li>
<li>Additional commits viewable in <a
href="https://github.com/console-rs/indicatif/compare/0.17.6...0.17.7">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=indicatif&package-manager=cargo&previous-version=0.17.6&new-version=0.17.7)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

53f615de

Introduce approval-voting/distribution benchmark (#2621) · f9f88688

Alexandru Gheorghe authored Feb 05, 2024



## Summary
Built on top of the tooling and ideas introduced in
https://github.com/paritytech/polkadot-sdk/pull/2528, this PR introduces
a synthetic benchmark for measuring and assessing the performance
characteristics of the approval-voting and approval-distribution
subsystems.

Currently this allows, us to simulate the behaviours of these systems
based on the following dimensions:
```
TestConfiguration:
# Test 1
- objective: !ApprovalsTest
    last_considered_tranche: 89
    min_coalesce: 1
    max_coalesce: 6
    enable_assignments_v2: true
    send_till_tranche: 60
    stop_when_approved: false
    coalesce_tranche_diff: 12
    workdir_prefix: "/tmp"
    num_no_shows_per_candidate: 0
    approval_distribution_expected_tof: 6.0
    approval_distribution_cpu_ms: 3.0
    approval_voting_cpu_ms: 4.30
  n_validators: 500
  n_cores: 100
  n_included_candidates: 100
  min_pov_size: 1120
  max_pov_size: 5120
  peer_bandwidth: 524288000000
  bandwidth: 524288000000
  latency:
    min_latency:
      secs: 0
      nanos: 1000000
    max_latency:
      secs: 0
      nanos: 100000000
  error: 0
  num_blocks: 10
```

## The approach
1. We build a real overseer with the real implementations for
approval-voting and approval-distribution subsystems.
2. For a given network size, for each validator we pre-computed all
potential assignments and approvals it would send, because this a
computation heavy operation this will be cached on a file on disk and be
re-used if the generation parameters don't change.
3. The messages will be sent accordingly to the configured parameters
and those are split into 3 main benchmarking scenarios.

## Benchmarking scenarios

### Best case scenario *approvals_throughput_best_case.yaml*
It send to the approval-distribution only the minimum required tranche
to gathered the needed_approvals, so that a candidate is approved.

### Behaviour in the presence of no-shows *approvals_no_shows.yaml*
It sends the tranche needed to approve a candidate when we have a
maximum of *num_no_shows_per_candidate* tranches with no-shows for each
candidate.

### Maximum throughput *approvals_throughput.yaml*
It sends all the tranches for each block and measures the used CPU and
necessary network bandwidth. by the approval-voting and
approval-distribution subsystem.

## How to run it
```
cargo run -p polkadot-subsystem-bench --release -- test-sequence --path polkadot/node/subsystem-bench/examples/approvals_throughput.yaml
```

## Evaluating performance
### Use the real subsystems metrics
If you follow the steps in
https://github.com/paritytech/polkadot-sdk/tree/master/polkadot/node/subsystem-bench#install-grafana
for installing locally prometheus and grafana, all real metrics for the
`approval-distribution`, `approval-voting` and overseer are available.
E.g:
<img width="2149" alt="Screenshot 2023-12-05 at 11 07 46"
src="https://github.com/paritytech/polkadot-sdk/assets/49718502/cb8ae2dd-178b-4922-bfa4-dc37e572ed38">

<img width="2551" alt="Screenshot 2023-12-05 at 11 09 42"
src="https://github.com/paritytech/polkadot-sdk/assets/49718502/8b4542ba-88b9-46f9-9b70-cc345366081b">

<img width="2154" alt="Screenshot 2023-12-05 at 11 10 15"
src="https://github.com/paritytech/polkadot-sdk/assets/49718502/b8874d8d-632e-443a-9840-14ad8e90c54f">

<img width="2535" alt="Screenshot 2023-12-05 at 11 10 52"
src="https://github.com/paritytech/polkadot-sdk/assets/49718502/779a439f-fd18-4985-bb80-85d5afad78e2">

### Profile with pyroscope
1. Setup pyroscope following the steps in
https://github.com/paritytech/polkadot-sdk/tree/master/polkadot/node/subsystem-bench#install-pyroscope,
then run any of the benchmark scenario with `--profile` as the
arguments.
2. Open the pyroscope dashboard in grafana, e.g:
<img width="2544" alt="Screenshot 2024-01-09 at 17 09 58"
src="https://github.com/paritytech/polkadot-sdk/assets/49718502/58f50c99-a910-4d20-951a-8b16639303d9">



### Useful  logs
1. Network bandwidth requirements:
```
Payload bytes received from peers: 503993 KiB total, 50399 KiB/block
Payload bytes sent to peers: 629971 KiB total, 62997 KiB/block
```

2. Cpu usage by the approval-distribution/approval-voting subsystems.
```
approval-distribution CPU usage 84.061s
approval-distribution CPU usage per block 8.406s
approval-voting CPU usage 96.532s
approval-voting CPU usage per block 9.653s
```

3. Time passed until a given block is approved
```
 Chain selection approved  after 3500 ms hash=0x0101010101010101010101010101010101010101010101010101010101010101
Chain selection approved  after 4500 ms hash=0x0202020202020202020202020202020202020202020202020202020202020202
```

### Using benchmark to quantify improvements from
https://github.com/paritytech/polkadot-sdk/pull/1178 +
https://github.com/paritytech/polkadot-sdk/pull/1191

Using a versi-node we compare the scenarios where all new optimisations
are disabled with a scenarios where tranche0 assignments are sent in a
single message and a conservative simulation where the coalescing of
approvals gives us just 50% reduction in the number of messages we send.

Overall, what we see is a speedup of around 30-40% in the time it takes
to process the necessary messages and a 30-40% reduction in the
necessary bandwidth.

#### Best case scenario comparison(minimum required tranches sent).
Unoptimised
```
    Number of blocks: 10
    Payload bytes received from peers: 53289 KiB total, 5328 KiB/block
    Payload bytes sent to peers: 52489 KiB total, 5248 KiB/block
    approval-distribution CPU usage 6.732s
    approval-distribution CPU usage per block 0.673s
    approval-voting CPU usage 9.523s
    approval-voting CPU usage per block 0.952s
```

vs Optimisation enabled
```
   Number of blocks: 10
   Payload bytes received from peers: 32141 KiB total, 3214 KiB/block
   Payload bytes sent to peers: 37314 KiB total, 3731 KiB/block
   approval-distribution CPU usage 4.658s
   approval-distribution CPU usage per block 0.466s
   approval-voting CPU usage 6.236s
   approval-voting CPU usage per block 0.624s
```

#### Worst case all tranches sent, very unlikely happens when sharding
breaks.

Unoptimised
```
   Number of blocks: 10
   Payload bytes received from peers: 746393 KiB total, 74639 KiB/block
   Payload bytes sent to peers: 729151 KiB total, 72915 KiB/block
   approval-distribution CPU usage 118.681s
   approval-distribution CPU usage per block 11.868s
   approval-voting CPU usage 124.118s
   approval-voting CPU usage per block 12.412s
```

vs optimised
```
    Number of blocks: 10
    Payload bytes received from peers: 503993 KiB total, 50399 KiB/block
    Payload bytes sent to peers: 629971 KiB total, 62997 KiB/block
    approval-distribution CPU usage 84.061s
    approval-distribution CPU usage per block 8.406s
    approval-voting CPU usage 96.532s
    approval-voting CPU usage per block 9.653s
```


## TODOs
[x] Polish implementation.
[x] Use what we have so far to evaluate
https://github.com/paritytech/polkadot-sdk/pull/1191 before merging.
[x] List of features and additional dimensions we want to use for
benchmarking.
[x] Run benchmark on hardware similar with versi and kusama nodes.
[ ] Add benchmark to be run in CI for catching regression in
performance.
[ ] Rebase on latest changes for network emulation.

---------

Signed-off-by: Andrei Sandu <[email protected]>
Signed-off-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Andrei Sandu <[email protected]>
Co-authored-by: Andrei Sandu <[email protected]>

f9f88688

Feb 03, 2024

Initial support for building RISC-V runtimes targeting PolkaVM (#3179) · e349fc9e

Koute authored Feb 03, 2024

This PR adds initial support for building RISC-V runtimes targeting
PolkaVM.

- Setting the `SUBSTRATE_RUNTIME_TARGET=riscv` environment variable will
now build a RISC-V runtime instead of a WASM runtime.
- This only adds support for *building* runtimes; running them will need
a PolkaVM-based executor, which I will add in a future PR.
- Only building the minimal runtime is supported (building the Polkadot
runtime doesn't work *yet* due to one of the dependencies).
- The builder now sets a `substrate_runtime` cfg flag when building the
runtimes, with the idea being that instead of doing `#[cfg(not(feature =
"std"))]` or `#[cfg(target_arch = "wasm32")]` to detect that we're
building a runtime you'll do `#[cfg(substrate_runtime)]`. (Switching the
whole codebase to use this will be done in a future PR; I deliberately
didn't do this here to keep this PR minimal and reviewable.)
- Further renaming of things (e.g. types, environment variables and proc
macro attributes having "wasm" in their name) to be target-agnostic will
also be done in a future refactoring PR (while keeping backwards
compatibility where it makes sense; I don't intend to break anyone's
workflow or create unnecessary churn).
- This PR also fixes two bugs in the `wasm-builder` crate:
* The `RUSTC` environment variable is now removed when invoking the
compiler. This prevents the toolchain version from being overridden when
called from a `build.rs` script.
* When parsing the `rustup toolchain list` output the `(default)` is now
properly stripped and not treated as part of the version.
- I've also added a minimal CI job that makes sure this doesn't break in
the future. (cc @paritytech/ci)

cc @athei



------

Also, just a fun little tidbit: quickly comparing the size of the built
runtimes it seems that the PolkaVM runtime is slightly smaller than the
WASM one. (`production` build, with the `names` section substracted from
the WASM's size to keep things fair, since for the PolkaVM runtime we're
currently stripping out everything)

- `.wasm`: 625505 bytes
- `.wasm` (after wasm-opt -O3): 563205 bytes
- `.wasm` (after wasm-opt -Os): 562987 bytes
- `.wasm` (after wasm-opt -Oz): 536852 bytes
- `.polkavm`: ~~580338 bytes~~ 550476 bytes (after enabling extra target
features; I'll add those in another PR once we have an executor working)

---------

Co-authored-by: Bastian Köcher <[email protected]>

e349fc9e

Feb 02, 2024

Bump wasmi from 0.31.0 to 0.31.2 (#3164) · 41db45a2

dependabot[bot] authored Feb 02, 2024



Bumps [wasmi](https://github.com/paritytech/wasmi) from 0.31.0 to
0.31.2.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/paritytech/wasmi/releases">wasmi's
releases</a>.</em></p>
<blockquote>
<h2>v0.31.1 - 2023-12-01</h2>
<h3>Fixes</h3>
<ul>
<li>Fixed a bug, in the <code>wasmi</code> engine executor, that causes
an out of bounds buffer write when calling or resuming a Wasm function
with a high number of parameters from the host side.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/paritytech/wasmi/blob/master/CHANGELOG.md">wasmi's
changelog</a>.</em></p>
<blockquote>
<h1>Changelog</h1>
<p>All notable changes to this project will be documented in this
file.</p>
<p>The format is loosely based on <a
href="https://keepachangelog.com/en/1.0.0/">Keep a Changelog</a>,
and this project adheres to <a
href="https://semver.org/spec/v2.0.0.html">Semantic Versioning</a>.
Additionally we have an <code>Internal</code> section for changes that
are of interest to developers.</p>
<p>Dates in this file are formattes as <code>YYYY-MM-DD</code>.</p>
<h2>[<code>0.32.0-beta.5</code>] - 2024-01-15</h2>
<p><strong>Note:</strong></p>
<ul>
<li>This is the beta of the upcoming <code>v0.32.0</code> release.
This version is not production ready yet and might contain serious bugs.
Please use this only for experimentation or at your own risk.</li>
<li>Performance tests indicated that the new register-machine bytecode
based
Wasmi engine performance is very sensitive to hardware or OS specifics
which may lead to very different performance characteristics.
<ul>
<li>We are working on fixing this until the stable release.</li>
<li>Measurements concluded that execution performance can be equal or
sometimes
even surpass Wasm3 execution performance.</li>
</ul>
</li>
</ul>
<h3>Added</h3>
<ul>
<li>Added a new execution engine based on register-machine bytecode. (<a
href="https://redirect.github.com/paritytech/wasmi/pull/729">paritytech/wasmi#729</a>)
<ul>
<li>The register-machine Wasmi <code>Engine</code> executes roughly
80-100% faster and
compiles roughly 30% slower according to benchmarks conducted so
far.</li>
</ul>
</li>
<li>Added <code>Module::new_unchecked</code> API. (<a
href="https://redirect.github.com/paritytech/wasmi/pull/829">paritytech/wasmi#829</a>)
<ul>
<li>This allows to compile a Wasm module without Wasm validation which
can be useful
when users know that their inputs are valid Wasm binaries.</li>
<li>This improves Wasm compilation performance for faster startup times
by roughly 10-20%.</li>
</ul>
</li>
<li>Added Wasm compilation modes. (<a
href="https://redirect.github.com/paritytech/wasmi/pull/844">paritytech/wasmi#844</a>)
<ul>
<li>When using <code>Module::new</code> Wasmi eagerly compiles Wasm
bytecode into Wasmi bytecode
which is optimized for efficient execution. However, this compilation
can become very
costly especially for large Wasm binaries.</li>
<li>The solution to this problem is to introduce new compilation modes,
namely:
<ul>
<li><code>CompilationMode::Eager</code>: Eager compilation, what Wasmi
did so far. (default)</li>
<li><code>CompilationMode::LazyTranslation</code>: Eager Wasm validation
and lazy Wasm translation.</li>
<li><code>CompilationMode::Lazy</code>: Lazy Wasm validation and
translation.</li>
</ul>
</li>
<li>Benchmarks concluded that
<ul>
<li><code>CompilationMode::LazyTanslation</code>: Usually improves
startup performance by a factor of 2 to 3.</li>
<li><code>CompilationMode::Lazy</code>: Usually improves startup
performance by a factor of up to 27.</li>
</ul>
</li>
<li>Note that <code>CompilationMode::Lazy</code> can lead to partially
validated Wasm modules
which can introduce non-determinism when using different Wasm
implementations.
Therefore users should know what they are doing when using
<code>CompilationMode::Lazy</code> if this is a concern.</li>
<li>Enable lazy Wasm compilation with:
<pre lang="rust"><code>let mut config = wasmi::Config::default();
</code></pre>
</li>
</ul>
</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/paritytech/wasmi/commit/0218dfc74b4c4a83261d46d90ac83fb513fd6b3f"><code>0218dfc</code></a>
Fix <code>InstanceCache</code> bug (<a
href="https://redirect.github.com/paritytech/wasmi/issues/904">#904</a>)</li>
<li><a
href="https://github.com/paritytech/wasmi/commit/3fd0cc2b2d7b7a55142e6a6cffffbe4212ed00ae"><code>3fd0cc2</code></a>
Bump <code>wasmi_arena</code> version (<a
href="https://redirect.github.com/paritytech/wasmi/issues/903">#903</a>)</li>
<li><a
href="https://github.com/paritytech/wasmi/commit/86c874029eba5067f4ecd01bc3c4f6dacab5a16e"><code>86c8740</code></a>
Fix <code>Sync</code> impl bug in <code>wasmi_arena</code> crate (<a
href="https://redirect.github.com/paritytech/wasmi/issues/902">#902</a>)</li>
<li><a
href="https://github.com/paritytech/wasmi/commit/27def282b06613e770d0ab96de88b9909973a12b"><code>27def28</code></a>
Bump actions/cache from 3 to 4 (<a
href="https://redirect.github.com/paritytech/wasmi/issues/900">#900</a>)</li>
<li><a
href="https://github.com/paritytech/wasmi/commit/59f9acc4776c09a35c6d563609de6818e9b65084"><code>59f9acc</code></a>
Fix typos (<a
href="https://redirect.github.com/paritytech/wasmi/issues/899">#899</a>)</li>
<li><a
href="https://github.com/paritytech/wasmi/commit/4c06acd816ccde6f45f9cc16aac4e18d36066054"><code>4c06acd</code></a>
Update and improve Wasmi's readme (<a
href="https://redirect.github.com/paritytech/wasmi/issues/898">#898</a>)</li>
<li><a
href="https://github.com/paritytech/wasmi/commit/2354a20ecc5e4209af2ba7458a8c383789ad8b4f"><code>2354a20</code></a>
Prepare release for Wasmi <code>v0.32.0 beta.5</code> (<a
href="https://redirect.github.com/paritytech/wasmi/issues/893">#893</a>)</li>
<li><a
href="https://github.com/paritytech/wasmi/commit/a4dc251bf066c362a2fc6acf00da924659894c6d"><code>a4dc251</code></a>
Fix heap buffer overflow due to Wasmi codegen bug (<a
href="https://redirect.github.com/paritytech/wasmi/issues/892">#892</a>)</li>
<li><a
href="https://github.com/paritytech/wasmi/commit/e60da4979009370cb1149b29dbb612886854efa9"><code>e60da49</code></a>
Add CI test job using LLVM's Address Sanitizer (<a
href="https://redirect.github.com/paritytech/wasmi/issues/891">#891</a>)</li>
<li><a
href="https://github.com/paritytech/wasmi/commit/28c770ac9623d78ce10c67d9bec013e0d3a43bcb"><code>28c770a</code></a>
Prepare release for Wasmi <code>v0.32.0-beta.4</code> (<a
href="https://redirect.github.com/paritytech/wasmi/issues/889">#889</a>)</li>
<li>Additional commits viewable in <a
href="https://github.com/paritytech/wasmi/compare/v0.31.0...v0.31.2">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=wasmi&package-manager=cargo&previous-version=0.31.0&new-version=0.31.2)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

41db45a2

Enable async backing on all testnet system chains (#2949) · 700d5f85

Marcin S. authored Feb 02, 2024



Built on top of https://github.com/paritytech/polkadot-sdk/pull/2826/
which was a trial run.

Guide:
https://github.com/w3f/polkadot-wiki/blob/master/docs/maintain/maintain-guides-async-backing.md

---------

Signed-off-by: georgepisaltu <[email protected]>
Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: Dónal Murray <[email protected]>
Co-authored-by: Dmitry Sinyavin <[email protected]>
Co-authored-by: s0me0ne-unkn0wn <[email protected]>
Co-authored-by: Svyatoslav Nikolsky <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: georgepisaltu <[email protected]>

700d5f85

Jan 31, 2024

[FRAME] Make `core-fellowship` ans `salary` work for swapped members (#3156) · 07e55006

Oliver Tale-Yazdi authored Jan 31, 2024

Fixup for https://github.com/paritytech/polkadot-sdk/pull/2587 to make
the `core-fellowship` crate work with swapped members.

Adds a `MemberSwappedHandler` to the `ranked-collective` pallet that are
implemented by `core-fellowship+salary`.
There is are exhaustive tests
[here](https://github.com/paritytech/polkadot-sdk/blob/72aa7ac1/substrate/frame/core-fellowship/src/tests/integration.rs#L338)
and
[here](https://github.com/paritytech/polkadot-sdk/blob/ab3cdb05

/substrate/frame/salary/src/tests/integration.rs#L224)
to check that adding member `1` is equivalent to adding member `0` and
then swapping.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

07e55006

Bump bounded-collections from 0.1.9 to 0.2.0 (#3118) · 2adf499a

dependabot[bot] authored Jan 31, 2024



Bumps [bounded-collections](https://github.com/paritytech/parity-common)
from 0.1.9 to 0.2.0.
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/paritytech/parity-common/commits/impl-rlp-v0.2.0">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=bounded-collections&package-manager=cargo&previous-version=0.1.9&new-version=0.2.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Liam Aharon <[email protected]>

2adf499a

xcm-executor: DepositReserveAsset charges delivery fees from inner assets (#3142) · 5354097a

Adrian Catangiu authored Jan 31, 2024



This fix aims to solve an issue in Kusama that resulted in failed
reserve asset transfers.

During multi-hop XCMs, like reserve asset transfers where the reserve is
not the sender nor the destination, but a third remote chain, the origin
is not available to pay for delivery fees out of their account directly,
so delivery fees should be paid out of transferred assets.

This commit also adds an xcm-emulator regression test that validates
this scenario is now working.

Signed-off-by: Adrian Catangiu <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>

5354097a

[cumulus] `parachains-common` testnet constants cleaning (#3134) · 4450b615

Branislav Kontur authored Jan 31, 2024



The `parachains-common` contains a lots of constants and type
definitions which are used for `polkadot-sdk`'s testnet runtimes and
also for `polkadot-fellows`'s production [SP
runtimes](https://github.com/polkadot-fellows/runtimes/tree/main/system-parachains/constants).
This PR cleans `parachains-common` module to contain only common and
generic functionality.

Testnet-specific constants have been moved to the separate module
dedicated just for testnets:
`polkadot-sdk/cumulus/parachains/runtimes/constants/`


Part of: https://github.com/paritytech/polkadot-sdk/issues/3054

---------

Co-authored-by: georgepisaltu <[email protected]>

4450b615

Jan 30, 2024

[FRAME] Introduce `force_adjust_total_issuance` (#3001) · 5a6f6d33

Oliver Tale-Yazdi authored Jan 30, 2024



Add `Balances::force_adjust_total_issuance` as preparation for fixing
https://github.com/polkadot-fellows/runtimes/issues/147.
Important changes in `substrate/frame/balances/src/lib.rs`.

TODO:
- [x] Update weights

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Bastian Köcher <[email protected]>

5a6f6d33

Snowbridge Ethereum Deneb fork preparation (#3029) · 85191e94

Clara van Staden authored Jan 30, 2024



- Prepares for the Deneb hardfork on Sepolia testnet on 31 January
(needs to be deployed to Rococo before then)
- Removes `beacon-minimal-spec` flag for simpler config
- Adds test comments

---------

Co-authored-by: Ron <[email protected]>
Co-authored-by: claravanstaden <Cats 4 life!>
Co-authored-by: Alistair Singh <[email protected]>

85191e94

Jan 29, 2024

Fix recv_signal in orchestra (#3105) · a6649083

Alexandru Gheorghe authored Jan 29, 2024



Pulls: https://github.com/paritytech/orchestra/pull/71

---------

Signed-off-by: Alexandru Gheorghe <[email protected]>

a6649083

Jan 28, 2024

Bump polkavm-derive from 0.4.0 to 0.5.0 (#3011) · 84a246c2

dependabot[bot] authored Jan 28, 2024



Bumps [polkavm-derive](https://github.com/koute/polkavm) from 0.4.0 to
0.5.0.
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/koute/polkavm/commit/fe4f77a161bfe6ae247c7290b3e314a713865071"><code>fe4f77a</code></a>
Add more tests</li>
<li><a
href="https://github.com/koute/polkavm/commit/170d1bf2ff468eefd7b46a56bacb2996a480ce25"><code>170d1bf</code></a>
Rework
<code>R_RISCV_HI20</code>/<code>R_RISCV_LO12_I</code>/<code>R_RISCV_LO12_S</code>
relocations</li>
<li><a
href="https://github.com/koute/polkavm/commit/97310bb7a2cf0c109957c3f6e59f2dfc9f1a470d"><code>97310bb</code></a>
Support more types of relocations</li>
<li><a
href="https://github.com/koute/polkavm/commit/09ae074e680072f6839d565062ff78d0427e3bca"><code>09ae074</code></a>
Add a slightly better error message</li>
<li><a
href="https://github.com/koute/polkavm/commit/02f1a061c34a355805a3e73b8a1a98775ced609e"><code>02f1a06</code></a>
Make error messages about unsupported relocations more
human-readable</li>
<li><a
href="https://github.com/koute/polkavm/commit/4c7e40dd7be9ac7608124e74859448376b671a66"><code>4c7e40d</code></a>
Support importing of the same function from multiple places</li>
<li><a
href="https://github.com/koute/polkavm/commit/35968d9b1625fde61df420d1a42614a730cfdadc"><code>35968d9</code></a>
Update the test blob build script</li>
<li><a
href="https://github.com/koute/polkavm/commit/3b2176d3835157e7e1f76787c96abf91b4b8ba9a"><code>3b2176d</code></a>
Reexport <code>ProgramParseError</code> from
<code>polkavm-linker</code></li>
<li><a
href="https://github.com/koute/polkavm/commit/200124014fd5b666af5b7ea4b80016332bd77883"><code>2001240</code></a>
Support <code>unsafe fn</code>s in <code>#[polkavm_export]</code></li>
<li><a
href="https://github.com/koute/polkavm/commit/9b76ec57b7e949f17c62d6c11a41699ac1699623"><code>9b76ec5</code></a>
Remove the need for a linker script</li>
<li>Additional commits viewable in <a
href="https://github.com/koute/polkavm/compare/v0.4.0...v0.5.0">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=polkavm-derive&package-manager=cargo&previous-version=0.4.0&new-version=0.5.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

84a246c2

Jan 26, 2024

Sync Cargo.toml and crates.io versions (#3034) · 3717ec38

Liam Aharon authored Jan 27, 2024



Related https://github.com/paritytech/polkadot-sdk/issues/3032

---

Using https://github.com/liamaharon/cargo-workspace-version-tools/ 

`cargo run -- sync --path ../polkadot-sdk`

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

3717ec38

Bump the known_good_semver group with 1 update (#3069) · acfac444

dependabot[bot] authored Jan 26, 2024



Bumps the known_good_semver group with 1 update:
[serde_yaml](https://github.com/dtolnay/serde-yaml).

Updates `serde_yaml` from 0.9.27 to 0.9.30
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/serde-yaml/releases">serde_yaml's
releases</a>.</em></p>
<blockquote>
<h2>0.9.30</h2>
<ul>
<li>Update proc-macro2 to fix caching issue when using a rustc-wrapper
such as sccache</li>
</ul>
<h2>0.9.29</h2>
<ul>
<li>Turn on <code>deny(unsafe_op_in_unsafe_fn)</code> lint</li>
</ul>
<h2>0.9.28</h2>
<ul>
<li>Update <code>unsafe-libyaml</code> dependency to pull in unaligned
write fix</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/09ee25156f608f95150b27edd120bd5471db3c64"><code>09ee251</code></a>
Release 0.9.30</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/caea939ece85ab54ac41de0672d683905f1e406a"><code>caea939</code></a>
Pull in proc-macro2 sccache fix</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/d255918c141fd72d01f169bb5aa0152234981699"><code>d255918</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/serde-yaml/issues/403">#403</a>
from dtolnay/optionifletelse</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/8cfeedd766f83dab24d03b9fb11b72886a247425"><code>8cfeedd</code></a>
Remove option_if_let_else clippy suppression</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/b957d2b15d7f3d96279997800fa0610b41b8fe00"><code>b957d2b</code></a>
Release 0.9.29</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/007fc2d5c1987847a0f1ac95885c56f8e6e5f808"><code>007fc2d</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/serde-yaml/issues/401">#401</a>
from dtolnay/unsafeop</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/5bac2475b0017d6a635d641df17165d71b951f0e"><code>5bac247</code></a>
Fill in unsafe blocks inside unsafe functions</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/0f6dba18ab8db598c4963e9242afd490ee0202f0"><code>0f6dba1</code></a>
Turn on deny(unsafe_op_in_unsafe_fn)</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/1b6e44837f0db0a1c15537311fed3579a7e8c6d2"><code>1b6e448</code></a>
Release 0.9.28</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/ec1a3145d7b6b809f7b3aa2d9dcd7db30f0588d4"><code>ec1a314</code></a>
Force unsafe-libyaml version that contains unaligned write fix</li>
<li>Additional commits viewable in <a
href="https://github.com/dtolnay/serde-yaml/compare/0.9.27...0.9.30">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=serde_yaml&package-manager=cargo&previous-version=0.9.27&new-version=0.9.30)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

---------

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: command-bot <>
Co-authored-by: Bastian Köcher <[email protected]>

acfac444

bump reed-solomon-novelpoly version (#3065) · 30ecd855

Alin Dima authored Jan 26, 2024

also remove some dead code and deduplicate some error handling

the new release brings performance improvements and support for
systematic chunk recovery, needed in:
https://github.com/paritytech/polkadot-sdk/pull/1644

30ecd855

Jan 25, 2024

Add subsystem benchmarks for `availability-distribution` and... · 47e46d17

Andrei Sandu authored Jan 25, 2024


Add subsystem benchmarks for `availability-distribution` and `biftield-distribution` (availability write) (#2970)

Introduce a new test objective : `DataAvailabilityWrite`.

The new benchmark measures the network and cpu usage of
`availability-distribution`, `biftield-distribution` and
`availability-store` subsystems from the perspective of a validator node
during the process when candidates are made available.

Additionally I refactored the networking emulation to support bandwidth
acounting and limits of incoming and outgoing requests.

Screenshot of succesful run


<img width="1293" alt="Screenshot 2024-01-17 at 19 17 44"
src="https://github.com/paritytech/polkadot-sdk/assets/54316454/fde11280-e25b-4dc3-9dc9-d4b9752f9b7a">

---------

Signed-off-by: Andrei Sandu <[email protected]>

47e46d17