- Mar 18, 2024
-
-
K Gunjan authored
Removed the `pallet::getter` macro call from storage type definitions and added the corresponding implementations directly. fixes #3330 polkadot address: 14JzTPPUd8x8phKi8qLxHgNTnTMg6DUukCLXoWprejkaHXPz --------- Co-authored-by:Bastian Köcher <[email protected]>
-
- Mar 17, 2024
-
-
s0me0ne-unkn0wn authored
Totally removes the `experimental` feature. Closes #3648. --------- Co-authored-by:
-
- Mar 15, 2024
-
-
gupnik authored
Step in https://github.com/paritytech/polkadot-sdk/issues/171 This PR removes `as [disambiguation_path]` syntax from `derive_impl` usage across the polkadot-sdk as introduced in https://github.com/paritytech/polkadot-sdk/pull/3505
-
- Mar 13, 2024
-
-
georgepisaltu authored
Revert "FRAME: Create `TransactionExtension` as a replacement for `SignedExtension` (#2280)" (#3665) This PR reverts #2280 which introduced `TransactionExtension` to replace `SignedExtension`. As a result of the discussion [here](https://github.com/paritytech/polkadot-sdk/pull/3623#issuecomment-1986789700 ), the changes will be reverted for now with plans to reintroduce the concept in the future. --------- Signed-off-by:
georgepisaltu <[email protected]>
-
- Mar 04, 2024
-
-
Gavin Wood authored
Closes #2160 First part of [Extrinsic Horizon](https://github.com/paritytech/polkadot-sdk/issues/2415 ) Introduces a new trait `TransactionExtension` to replace `SignedExtension`. Introduce the idea of transactions which obey the runtime's extensions and have according Extension data (né Extra data) yet do not have hard-coded signatures. Deprecate the terminology of "Unsigned" when used for transactions/extrinsics owing to there now being "proper" unsigned transactions which obey the extension framework and "old-style" unsigned which do not. Instead we have __*General*__ for the former and __*Bare*__ for the latter. (Ultimately, the latter will be phased out as a type of transaction, and Bare will only be used for Inherents.) Types of extrinsic are now therefore: - Bare (no hardcoded signature, no Extra data; used to be known as "Unsigned") - Bare transactions (deprecated): Gossiped, validated with `ValidateUnsigned` (deprecated) and the `_bare_compat` bits of `TransactionExtension` (deprecated). - Inherents: Not gossiped, validated with `ProvideInherent`. - Extended (Extra data): Gossiped, validated via `TransactionExtension`. - Signed transactions (with a hardcoded signature). - General transactions (without a hardcoded signature). `TransactionExtension` differs from `SignedExtension` because: - A signature on the underlying transaction may validly not be present. - It may alter the origin during validation. - `pre_dispatch` is renamed to `prepare` and need not contain the checks present in `validate`. - `validate` and `prepare` is passed an `Origin` rather than a `AccountId`. - `validate` may pass arbitrary information into `prepare` via a new user-specifiable type `Val`. - `AdditionalSigned`/`additional_signed` is renamed to `Implicit`/`implicit`. It is encoded *for the entire transaction* and passed in to each extension as a new argument to `validate`. This facilitates the ability of extensions to acts as underlying crypto. There is a new `DispatchTransaction` trait which contains only default function impls and is impl'ed for any `TransactionExtension` impler. It provides several utility functions which reduce some of the tedium from using `TransactionExtension` (indeed, none of its regular functions should now need to be called directly). Three transaction version discriminator ("versions") are now permissible: - 0b000000100: Bare (used to be called "Unsigned"): contains Signature or Extra (extension data). After bare transactions are no longer supported, this will strictly identify an Inherents only. - 0b100000100: Old-school "Signed" Transaction: contains Signature and Extra (extension data). - 0b010000100: New-school "General" Transaction: contains Extra (extension data), but no Signature. For the New-school General Transaction, it becomes trivial for authors to publish extensions to the mechanism for authorizing an Origin, e.g. through new kinds of key-signing schemes, ZK proofs, pallet state, mutations over pre-authenticated origins or any combination of the above. ## Code Migration ### NOW: Getting it to build Wrap your `SignedExtension`s in `AsTransactionExtension`. This should be accompanied by renaming your aggregate type in line with the new terminology. E.g. Before: ```rust /// The SignedExtension to the basic transaction logic. pub type SignedExtra = ( /* snip */ MySpecialSignedExtension, ); /// Unchecked extrinsic type as expected by this runtime. pub type UncheckedExtrinsic = generic::UncheckedExtrinsic<Address, RuntimeCall, Signature, SignedExtra>; ``` After: ```rust /// The extension to the basic transaction logic. pub type TxExtension = ( /* snip */ AsTransactionExtension<MySpecialSignedExtension>, ); /// Unchecked extrinsic type as expected by this runtime. pub type UncheckedExtrinsic = generic::UncheckedExtrinsic<Address, RuntimeCall, Signature, TxExtension>; ``` You'll also need to alter any transaction building logic to add a `.into()` to make the conversion happen. E.g. Before: ```rust fn construct_extrinsic( /* snip */ ) -> UncheckedExtrinsic { let extra: SignedExtra = ( /* snip */ MySpecialSignedExtension::new(/* snip */), ); let payload = SignedPayload::new(call.clone(), extra.clone()).unwrap(); let signature = payload.using_encoded(|e| sender.sign(e)); UncheckedExtrinsic::new_signed( /* snip */ Signature::Sr25519(signature), extra, ) } ``` After: ```rust fn construct_extrinsic( /* snip */ ) -> UncheckedExtrinsic { let tx_ext: TxExtension = ( /* snip */ MySpecialSignedExtension::new(/* snip */).into(), ); let payload = SignedPayload::new(call.clone(), tx_ext.clone()).unwrap(); let signature = payload.using_encoded(|e| sender.sign(e)); UncheckedExtrinsic::new_signed( /* snip */ Signature::Sr25519(signature), tx_ext, ) } ``` ### SOON: Migrating to `TransactionExtension` Most `SignedExtension`s can be trivially converted to become a `TransactionExtension`. There are a few things to know. - Instead of a single trait like `SignedExtension`, you should now implement two traits individually: `TransactionExtensionBase` and `TransactionExtension`. - Weights are now a thing and must be provided via the new function `fn weight`. #### `TransactionExtensionBase` This trait takes care of anything which is not dependent on types specific to your runtime, most notably `Call`. - `AdditionalSigned`/`additional_signed` is renamed to `Implicit`/`implicit`. - Weight must be returned by implementing the `weight` function. If your extension is associated with a pallet, you'll probably want to do this via the pallet's existing benchmarking infrastructure. #### `TransactionExtension` Generally: - `pre_dispatch` is now `prepare` and you *should not reexecute the `validate` functionality in there*! - You don't get an account ID any more; you get an origin instead. If you need to presume an account ID, then you can use the trait function `AsSystemOriginSigner::as_system_origin_signer`. - You get an additional ticket, similar to `Pre`, called `Val`. This defines data which is passed from `validate` into `prepare`. This is important since you should not be duplicating logic from `validate` to `prepare`, you need a way of passing your working from the former into the latter. This is it. - This trait takes two type parameters: `Call` and `Context`. `Call` is the runtime call type which used to be an associated type; you can just move it to become a type parameter for your trait impl. `Context` is not currently used and you can safely implement over it as an unbounded type. - There's no `AccountId` associated type any more. Just remove it. Regarding `validate`: - You get three new parameters in `validate`; all can be ignored when migrating from `SignedExtension`. - `validate` returns a tuple on success; the second item in the tuple is the new ticket type `Self::Val` which gets passed in to `prepare`. If you use any information extracted during `validate` (off-chain and on-chain, non-mutating) in `prepare` (on-chain, mutating) then you can pass it through with this. For the tuple's last item, just return the `origin` argument. Regarding `prepare`: - This is renamed from `pre_dispatch`, but there is one change: - FUNCTIONALITY TO VALIDATE THE TRANSACTION NEED NOT BE DUPLICATED FROM `validate`!! - (This is different to `SignedExtension` which was required to run the same checks in `pre_dispatch` as in `validate`.) Regarding `post_dispatch`: - Since there are no unsigned transactions handled by `TransactionExtension`, `Pre` is always defined, so the first parameter is `Self::Pre` rather than `Option<Self::Pre>`. If you make use of `SignedExtension::validate_unsigned` or `SignedExtension::pre_dispatch_unsigned`, then: - Just use the regular versions of these functions instead. - Have your logic execute in the case that the `origin` is `None`. - Ensure your transaction creation logic creates a General Transaction rather than a Bare Transaction; this means having to include all `TransactionExtension`s' data. - `ValidateUnsigned` can still be used (for now) if you need to be able to construct transactions which contain none of the extension data, however these will be phased out in stage 2 of the Transactions Horizon, so you should consider moving to an extension-centric design. ## TODO - [x] Introduce `CheckSignature` impl of `TransactionExtension` to ensure it's possible to have crypto be done wholly in a `TransactionExtension`. - [x] Deprecate `SignedExtension` and move all uses in codebase to `TransactionExtension`. - [x] `ChargeTransactionPayment` - [x] `DummyExtension` - [x] `ChargeAssetTxPayment` (asset-tx-payment) - [x] `ChargeAssetTxPayment` (asset-conversion-tx-payment) - [x] `CheckWeight` - [x] `CheckTxVersion` - [x] `CheckSpecVersion` - [x] `CheckNonce` - [x] `CheckNonZeroSender` - [x] `CheckMortality` - [x] `CheckGenesis` - [x] `CheckOnlySudoAccount` - [x] `WatchDummy` - [x] `PrevalidateAttests` - [x] `GenericSignedExtension` - [x] `SignedExtension` (chain-polkadot-bulletin) - [x] `RefundSignedExtensionAdapter` - [x] Implement `fn weight` across the board. - [ ] Go through all pre-existing extensions which assume an account signer and explicitly handle the possibility of another kind of origin. - [x] `CheckNonce` should probably succeed in the case of a non-account origin. - [x] `CheckNonZeroSender` should succeed in the case of a non-account origin. - [x] `ChargeTransactionPayment` and family should fail in the case of a non-account origin. - [ ] - [x] Fix any broken tests. --------- Signed-off-by:
Alexandru Vasile <[email protected]> Signed-off-by:
dependabot[bot] <[email protected]> Signed-off-by:
Oliver Tale-Yazdi <[email protected]> Signed-off-by:
Alexandru Gheorghe <[email protected]> Signed-off-by:
Andrei Sandu <[email protected]> Co-authored-by:
Nikhil Gupta <[email protected]> Co-authored-by:
georgepisaltu <[email protected]> Co-authored-by:
Chevdor <[email protected]> Co-authored-by:
Maciej <[email protected]> Co-authored-by:
Javier Viola <[email protected]> Co-authored-by:
Marcin S. <[email protected]> Co-authored-by:
Tsvetomir Dimitrov <[email protected]> Co-authored-by:
Javier Bullrich <[email protected]> Co-authored-by:
Koute <[email protected]> Co-authored-by:
Adrian Catangiu <[email protected]> Co-authored-by:
Vladimir Istyufeev <[email protected]>
Co-authored-by: Ross Bulat <[email protected]> Co-authored-by:
Gonçalo Pestana <[email protected]> Co-authored-by:
Liam Aharon <[email protected]> Co-authored-by:
Svyatoslav Nikolsky <[email protected]> Co-authored-by:
André Silva <[email protected]> Co-authored-by:
s0me0ne-unkn0wn <[email protected]> Co-authored-by:
ordian <[email protected]> Co-authored-by:
Sebastian Kunert <[email protected]> Co-authored-by:
Aaro Altonen <[email protected]> Co-authored-by:
Dmitry Markin <[email protected]> Co-authored-by:
Alexandru Vasile <[email protected]> Co-authored-by:
Alexander Samusev <[email protected]> Co-authored-by:
Julian Eager <[email protected]> Co-authored-by:
Michal Kucharczyk <[email protected]> Co-authored-by:
Davide Galassi <[email protected]> Co-authored-by:
Dónal Murray <[email protected]> Co-authored-by:
yjh <[email protected]> Co-authored-by:
Tom Mi <[email protected]> Co-authored-by:
dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by:
Will | Paradox | ParaNodes.io <[email protected]> Co-authored-by:
Bastian Köcher <[email protected]> Co-authored-by:
Joshy Orndorff <[email protected]> Co-authored-by:
Joshy Orndorff <[email protected]> Co-authored-by:
PG Herveou <[email protected]> Co-authored-by:
Alexander Theißen <[email protected]> Co-authored-by:
Kian Paimani <[email protected]> Co-authored-by:
Juan Girini <[email protected]> Co-authored-by:
bader y <[email protected]> Co-authored-by:
James Wilson <[email protected]> Co-authored-by:
joe petrowski <[email protected]> Co-authored-by:
asynchronous rob <[email protected]> Co-authored-by:
Parth <[email protected]> Co-authored-by:
Andrew Jones <[email protected]> Co-authored-by:
Jonathan Udd <[email protected]> Co-authored-by:
Serban Iorga <[email protected]> Co-authored-by:
Egor_P <[email protected]> Co-authored-by:
Branislav Kontur <[email protected]> Co-authored-by:
Evgeny Snitko <[email protected]> Co-authored-by:
Just van Stam <[email protected]> Co-authored-by:
Francisco Aguirre <[email protected]> Co-authored-by:
gupnik <[email protected]> Co-authored-by:
dzmitry-lahoda <[email protected]> Co-authored-by:
zhiqiangxu <[email protected]> Co-authored-by:
Nazar Mokrynskyi <[email protected]> Co-authored-by:
Anwesh <[email protected]> Co-authored-by:
cheme <[email protected]> Co-authored-by:
Sam Johnson <[email protected]> Co-authored-by:
kianenigma <[email protected]> Co-authored-by:
Jegor Sidorenko <[email protected]> Co-authored-by:
Muharem <[email protected]> Co-authored-by:
joepetrowski <[email protected]> Co-authored-by:
Alexandru Gheorghe <[email protected]> Co-authored-by:
Gabriel Facco de Arruda <[email protected]> Co-authored-by:
Squirrel <[email protected]> Co-authored-by:
Andrei Sandu <[email protected]> Co-authored-by:
-
- Mar 01, 2024
-
-
Egor_P authored
This PR backports Node version and `spec_version` bumps to `1.8.0` from the latest release and orders prdoc files related to it.
-
Francisco Aguirre authored
If an XCM execution fails or ends with leftover assets, these will be trapped. In order to claim them, a custom XCM has to be executed, with the `ClaimAsset` instruction. However, arbitrary XCM execution is not allowed everywhere yet and XCM itself is still not easy enough to use for users out there with trapped assets. This new extrinsic in `pallet-xcm` will allow these users to easily claim their assets, without concerning themselves with writing arbitrary XCMs. Part of fixing https://github.com/paritytech/polkadot-sdk/issues/3495 --------- Co-authored-by: command-bot <> Co-authored-by:
-
- Feb 28, 2024
-
-
Oliver Tale-Yazdi authoredThis MR is the merge of https://github.com/paritytech/substrate/pull/14414 and https://github.com/paritytech/substrate/pull/14275. It implements [RFC#13](https://github.com/polkadot-fellows/RFCs/pull/13), closes https://github.com/paritytech/polkadot-sdk/issues/198. ----- This Merge request introduces three major topicals: 1. Multi-Block-Migrations 1. New pallet `poll` hook for periodic service work 1. Replacement hooks for `on_initialize` and `on_finalize` in cases where `poll` cannot be used and some more general changes to FRAME. The changes for each topical span over multiple crates. They are listed in topical order below. # 1.) Multi-Block-Migrations Multi-Block-Migrations are facilitated by creating `pallet_migrations` and configuring `System::Config::MultiBlockMigrator` to point to it. Executive picks this up and triggers one step of the migrations pallet per block. The chain is in lockdown mode for as long as an MBM is ongoing. Executive does this by polling `MultiBlockMigrator::ongoing` and not allowing any transaction in a block, if true. A MBM is defined through trait `SteppedMigration`. A condensed version looks like this: ```rust /// A migration that can proceed in multiple steps. pub trait SteppedMigration { type Cursor: FullCodec + MaxEncodedLen; type Identifier: FullCodec + MaxEncodedLen; fn id() -> Self::Identifier; fn max_steps() -> Option<u32>; fn step( cursor: Option<Self::Cursor>, meter: &mut WeightMeter, ) -> Result<Option<Self::Cursor>, SteppedMigrationError>; } ``` `pallet_migrations` can be configured with an aggregated tuple of these migrations. It then starts to migrate them one-by-one on the next runtime upgrade. Two things are important here: - 1. Doing another runtime upgrade while MBMs are ongoing is not a good idea and can lead to messed up state. - 2. **Pallet Migrations MUST BE CONFIGURED IN `System::Config`, otherwise it is not used.** The pallet supports an `UpgradeStatusHandler` that can be used to notify external logic of upgrade start/finish (for example to pause XCM dispatch). Error recovery is very limited in the case that a migration errors or times out (exceeds its `max_steps`). Currently the runtime dev can decide in `FailedMigrationHandler::failed` how to handle this. One follow-up would be to pair this with the `SafeMode` pallet and enact safe mode when an upgrade fails, to allow governance to rescue the chain. This is currently not possible, since governance is not `Mandatory`. ## Runtime API - `Core`: `initialize_block` now returns `ExtrinsicInclusionMode` to inform the Block Author whether they can push transactions. ### Integration Add it to your runtime implementation of `Core` and `BlockBuilder`: ```patch diff --git a/runtime/src/lib.rs b/runtime/src/lib.rs @@ impl_runtime_apis! { impl sp_block_builder::Core<Block> for Runtime { - fn initialize_block(header: &<Block as BlockT>::Header) { + fn initialize_block(header: &<Block as BlockT>::Header) -> RuntimeExecutiveMode { Executive::initialize_block(header) } ... } ``` # 2.) `poll` hook A new pallet hook is introduced: `poll`. `Poll` is intended to replace mostly all usage of `on_initialize`. The reason for this is that any code that can be called from `on_initialize` cannot be migrated through an MBM. Currently there is no way to statically check this; the implication is to use `on_initialize` as rarely as possible. Failing to do so can result in broken storage invariants. The implementation of the poll hook depends on the `Runtime API` changes that are explained above. # 3.) Hard-Deadline callbacks Three new callbacks are introduced and configured on `System::Config`: `PreInherents`, `PostInherents` and `PostTransactions`. These hooks are meant as replacement for `on_initialize` and `on_finalize` in cases where the code that runs cannot be moved to `poll`. The reason for this is to make the usage of HD-code (hard deadline) more explicit - again to prevent broken invariants by MBMs. # 4.) FRAME (general changes) ## `frame_system` pallet A new memorize storage item `InherentsApplied` is added. It is used by executive to track whether inherents have already been applied. Executive and can then execute the MBMs directly between inherents and transactions. The `Config` gets five new items: - `SingleBlockMigrations` this is the new way of configuring migrations that run in a single block. Previously they were defined as last generic argument of `Executive`. This shift is brings all central configuration about migrations closer into view of the developer (migrations that are configured in `Executive` will still work for now but is deprecated). - `MultiBlockMigrator` this can be configured to an engine that drives MBMs. One example would be the `pallet_migrations`. Note that this is only the engine; the exact MBMs are injected into the engine. - `PreInherents` a callback that executes after `on_initialize` but before inherents. - `PostInherents` a callback that executes after all inherents ran (including MBMs and `poll`). - `PostTransactions` in symmetry to `PreInherents`, this one is called before `on_finalize` but after all transactions. A sane default is to set all of these to `()`. Example diff suitable for any chain: ```patch @@ impl frame_system::Config for Test { type MaxConsumers = ConstU32<16>; + type SingleBlockMigrations = (); + type MultiBlockMigrator = (); + type PreInherents = (); + type PostInherents = (); + type PostTransactions = (); } ``` An overview of how the block execution now looks like is here. The same graph is also in the rust doc. <details><summary>Block Execution Flow</summary> <p>  </p> </details> ## Inherent Order Moved to https://github.com/paritytech/polkadot-sdk/pull/2154 --------------- ## TODO - [ ] Check that `try-runtime` still works - [ ] Ensure backwards compatibility with old Runtime APIs - [x] Consume weight correctly - [x] Cleanup --------- Signed-off-by:
Gavin Wood <[email protected]> Co-authored-by:
-
Liam Aharon authoredCloses https://github.com/paritytech/polkadot-sdk-docs/issues/55 - Changes 'current storage version' terminology to less ambiguous 'in-code storage version' (suggestion by @ggwpez) - Adds a new example pallet `pallet-example-single-block-migrations` - Adds a new reference doc to replace https://docs.substrate.io/maintain/runtime-upgrades/ (temporarily living in the pallet while we wait for developer hub PR to merge) - Adds documentation for the `storage_alias` macro - Improves `trait Hooks` docs - Improves `trait GetStorageVersion` docs - Update the suggested patterns for using `VersionedMigration`, so that version unchecked migrations are never exported - Prevents accidental usage of version unchecked migrations in runtimes https://github.com/paritytech/substrate/pull/14421#discussion_r1255467895 - Unversioned migration code is kept inside `mod version_unchecked`, versioned code is kept in `pub mod versioned` - It is necessary to use modules to limit visibility because the inner migration must be `pub`. See https://github.com/rust-lang/rust/issues/30905 and https://internals.rust-lang.org/t/lang-team-minutes-private-in-public-rules/4504/40 for more. ### todo - [x] move to reference docs to proper place within sdk-docs (now that https://github.com/paritytech/polkadot-sdk/pull/2102 is merged) - [x] prdoc --------- Co-authored-by:
-
- Feb 26, 2024
-
-
Branislav Kontur authored
## Problem During the bumping of the `polkadot-fellows` repository to `[email protected]`, I encountered a situation where the benchmarks `teleport_assets` and `reserve_transfer_assets` in AssetHubKusama started to fail. This issue arose due to a decreased ED balance for AssetHubs introduced [here](https://github.com/polkadot-fellows/runtimes/pull/158/files#diff-80668ff8e793b64f36a9a3ec512df5cbca4ad448c157a5d81abda1b15f35f1daR213), and also because of a [missing CI pipeline](https://github.com/polkadot-fellows/runtimes/issues/197) to check the benchmarks, which went unnoticed. These benchmarks expect the `caller` to have enough: 1. balance to transfer (BTT) 2. balance for paying delivery (BFPD). So the initial balance was calculated as `ED * 100`, which seems reasonable: ``` const ED_MULTIPLIER: u32 = 100; let balance = existential_deposit.saturating_mul(ED_MULTIPLIER.into());` ``` The problem arises when the price for delivery is 100 times higher than the existential deposit. In other words, when `ED * 100` does not cover `BTT` + `BFPD`. I check AHR/AHW/AHK/AHP and this problem has only AssetHubKusama ``` ED: 3333333 calculated price to parent delivery: 1031666634 (from xcm logs from the benchmark) --- 3333333 * 100 - BTT(3333333) - BFPD(1031666634) = −701666667 ``` which results in the error; ``` 2024-02-23 09:19:42 Unable to charge fee with error Module(ModuleError { index: 31, error: [17, 0, 0, 0], message: Some("FeesNotMet") }) Error: Input("Benchmark pallet_xcm::reserve_transfer_assets failed: FeesNotMet") ``` ## Solution The benchmarks `teleport_assets` and `reserve_transfer_assets` were fixed by removing `ED * 100` and replacing it with `DeliveryHelper` logic, which calculates the (almost real) price for delivery and sets it along with the existential deposit as the initial balance for the account used in the benchmark. ## TODO - [ ] patch for 1.6 - https://github.com/paritytech/polkadot-sdk/pull/3466 - [ ] patch for 1.7 - https://github.com/paritytech/polkadot-sdk/pull/3465 - [ ] patch for 1.8 - TODO: PR --------- Co-authored-by:
-
- Feb 20, 2024
-
-
Branislav Kontur authored
-
- Feb 13, 2024
-
-
Branislav Kontur authored
I found out during the cleanup of this deprecation message in the `polkadot-fellows` repository that we deprecated `CurrencyAdapter` without making the recommended changes. ## TODO - [ ] fix `polkadot-fellows` bump to 1.6.0 https://github.com/polkadot-fellows/runtimes/pull/159 --------- Co-authored-by:
-
- Feb 09, 2024
-
-
Egor_P authored
This PR backports version bumps from `1.7.0` release branch and moves related prdoc files to the appropriate folder.
-
- Feb 06, 2024
-
-
Branislav Kontur authored
Relates to: https://github.com/paritytech/polkadot-sdk/issues/3214 ## TODO - [ ] backport to the `1.7.0` release
-
- Feb 02, 2024
-
-
Marcin S. authored
Built on top of https://github.com/paritytech/polkadot-sdk/pull/2826/ which was a trial run. Guide: https://github.com/w3f/polkadot-wiki/blob/master/docs/maintain/maintain-guides-async-backing.md --------- Signed-off-by:
Dmitry Sinyavin <[email protected]> Co-authored-by:
-
- Jan 31, 2024
-
-
Branislav Kontur authored
[frame] `#[pallet::composite_enum]` improved variant count handling + removed `pallet_balances`'s `MaxHolds` config (#2657) I started this investigation/issue based on @liamaharon question [here](https://github.com/paritytech/polkadot-sdk/pull/1801#discussion_r1410452499). ## Problem The `pallet_balances` integrity test should correctly detect that the runtime has correct distinct `HoldReasons` variant count. I assume the same situation exists for RuntimeFreezeReason. It is not a critical problem, if we set `MaxHolds` with a sufficiently large value, everything should be ok. However, in this case, the integrity_test check becomes less useful. **Situation for "any" runtime:** - `HoldReason` enums from different pallets: ```rust /// from pallet_nis #[pallet::composite_enum] pub enum HoldReason { NftReceipt, } /// from pallet_preimage #[pallet::composite_enum] pub enum HoldReason { Preimage, } // from pallet_state-trie-migration #[pallet::composite_enum] pub enum HoldReason { SlashForContinueMigrate, SlashForMigrateCustomTop, SlashForMigrateCustomChild, } ``` - generated `RuntimeHoldReason` enum looks like: ```rust pub enum RuntimeHoldReason { #[codec(index = 32u8)] Preimage(pallet_preimage::HoldReason), #[codec(index = 38u8)] Nis(pallet_nis::HoldReason), #[codec(index = 42u8)] StateTrieMigration(pallet_state_trie_migration::HoldReason), } ``` - composite enum `RuntimeHoldReason` variant count is detected as `3` - we set `type MaxHolds = ConstU32<3>` - `pallet_balances::integrity_test` is ok with `3`(at least 3) However, the real problem can occur in a live runtime where some functionality might stop working. This is due to a total of 5 distinct hold reasons (for pallets with multi-instance support, it is even more), and not all of them can be used because of an incorrect `MaxHolds`, which is deemed acceptable according to the `integrity_test`: ``` // pseudo-code - if we try to call all of these: T::Currency::hold(&pallet_nis::HoldReason::NftReceipt.into(), &nft_owner, deposit)?; T::Currency::hold(&pallet_preimage::HoldReason::Preimage.into(), &nft_owner, deposit)?; T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForContinueMigrate.into(), &nft_owner, deposit)?; // With `type MaxHolds = ConstU32<3>` these two will fail T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomTop.into(), &nft_owner, deposit)?; T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomChild.into(), &nft_owner, deposit)?; ``` ## Solutions A macro `#[pallet::*]` expansion is extended of `VariantCount` implementation for the `#[pallet::composite_enum]` enum type. This expansion generates the `VariantCount` implementation for pallets' `HoldReason`, `FreezeReason`, `LockId`, and `SlashReason`. Enum variants must be plain enum values without fields to ensure a deterministic count. The composite runtime enum, `RuntimeHoldReason` and `RuntimeFreezeReason`, now sets `VariantCount::VARIANT_COUNT` as the sum of pallets' enum `VariantCount::VARIANT_COUNT`: ```rust #[frame_support::pallet(dev_mode)] mod module_single_instance { #[pallet::composite_enum] pub enum HoldReason { ModuleSingleInstanceReason1, ModuleSingleInstanceReason2, } ... } #[frame_support::pallet(dev_mode)] mod module_multi_instance { #[pallet::composite_enum] pub enum HoldReason<I: 'static = ()> { ModuleMultiInstanceReason1, ModuleMultiInstanceReason2, ModuleMultiInstanceReason3, } ... } impl self::sp_api_hidden_includes_construct_runtime::hidden_include::traits::VariantCount for RuntimeHoldReason { const VARIANT_COUNT: u32 = 0 + module_single_instance::HoldReason::VARIANT_COUNT + module_multi_instance::HoldReason::<module_multi_instance::Instance1>::VARIANT_COUNT + module_multi_instance::HoldReason::<module_multi_instance::Instance2>::VARIANT_COUNT + module_multi_instance::HoldReason::<module_multi_instance::Instance3>::VARIANT_COUNT; } ``` In addition, `MaxHolds` is removed (as suggested [here](https://github.com/paritytech/polkadot-sdk/pull/2657#discussion_r1443324573)) from `pallet_balances`, and its `Holds` are now bounded to `RuntimeHoldReason::VARIANT_COUNT`. Therefore, there is no need to let the runtime specify `MaxHolds`. ## For reviewers Relevant changes can be found here: - `substrate/frame/support/procedural/src/lib.rs` - `substrate/frame/support/procedural/src/pallet/parse/composite.rs` - `substrate/frame/support/procedural/src/pallet/expand/composite.rs` - `substrate/frame/support/procedural/src/construct_runtime/expand/composite_helper.rs` - `substrate/frame/support/procedural/src/construct_runtime/expand/hold_reason.rs` - `substrate/frame/support/procedural/src/construct_runtime/expand/freeze_reason.rs` - `substrate/frame/support/src/traits/misc.rs` And the rest of the files is just about removed `MaxHolds` from `pallet_balances` ## Next steps Do the same for `MaxFreezes` https://github.com/paritytech/polkadot-sdk/issues/2997 . --------- Co-authored-by: command-bot <> Co-authored-by:
-
Branislav Kontur authored
The `parachains-common` contains a lots of constants and type definitions which are used for `polkadot-sdk`'s testnet runtimes and also for `polkadot-fellows`'s production [SP runtimes](https://github.com/polkadot-fellows/runtimes/tree/main/system-parachains/constants). This PR cleans `parachains-common` module to contain only common and generic functionality. Testnet-specific constants have been moved to the separate module dedicated just for testnets: `polkadot-sdk/cumulus/parachains/runtimes/constants/` Part of: https://github.com/paritytech/polkadot-sdk/issues/3054 --------- Co-authored-by:
-
- Jan 30, 2024
-
-
Oliver Tale-Yazdi authored
Add `Balances::force_adjust_total_issuance` as preparation for fixing https://github.com/polkadot-fellows/runtimes/issues/147 . Important changes in `substrate/frame/balances/src/lib.rs`. TODO: - [x] Update weights --------- Signed-off-by:
-
Oliver Tale-Yazdi authored
Reverts paritytech/polkadot-sdk#2302.
🤦 ♂️ should have checked the migration CI first. We either need to reduce the `max_message_size` for the open HRMP channels on the failing chains or increase the `PageSize` of the XCMP queue. Both would be fine on a test-net, but i assume this will also fail before the next SP runtime upgrade so first need to think what best to do. AFAIK its not possible currently to change the `max_message_size` of an open HRMP channel.
-
- Jan 29, 2024
-
-
Oliver Tale-Yazdi authored
Remove `without_storage_info` from the XCMP queue pallet. Part of https://github.com/paritytech/polkadot-sdk/issues/323 Changes: - Limit the number of channels that can be suspended at the same time. - Limit the number of channels that can have messages or signals pending at the same time. A No-OP migration is put in place to ensure that all `BoundedVec`s still decode and not truncate after upgrade. The storage version is thereby bumped to 4 to have our tooling remind us to deploy that migration. --------- Signed-off-by:
-
- Jan 24, 2024
-
-
Just van Stam authored
Moved from: https://github.com/paritytech/polkadot/pull/6951 closes https://github.com/paritytech/polkadot-sdk/issues/490 - [x] update cumulus --- This PR introduces transactional processing of certain xcm instructions. For the list of instructions checkout https://github.com/paritytech/polkadot-sdk/issues/490. The transactional processing is implemented as an xcm-executor config item. The two implementations in this PR are `FrameTransactionalProcessor` and `()`. The `()` implementation does no transactional processing. Each implementation of the `ProcessTransaction` trait has an `IS_TRANSACTIONAL` const that tells the XCVM if transactional processing is actually implemented. If Transactional processing is implemented, changes to touched registers should also be rolled back to prevent inconsistencies. Note for reviewers: Check out the following safety assumption: https://github.com/paritytech/polkadot-sdk/pull/1222/files#diff-4effad7d8c1c9de19fd27e18661cbf2128c8718f3b2420a27d2f816e0749ea53R30 --------- Co-authored-by:
Keith Yeung <[email protected]> Co-authored-by:
-
- Jan 23, 2024
-
-
Niklas Adolfsson authored
This is a rather big change in jsonrpsee, the major things in this bump are: - Server backpressure (the subscription impls are modified to deal with that) - Allow custom error types / return types (remove jsonrpsee::core::Error and jsonrpee::core::CallError) - Bug fixes (graceful shutdown in particular not used by substrate anyway) - Less dependencies for the clients in particular - Return type requires Clone in method call responses - Moved to tokio channels - Async subscription API (not used in this PR) Major changes in this PR: - The subscriptions are now bounded and if subscription can't keep up with the server it is dropped - CLI: add parameter to configure the jsonrpc server bounded message buffer (default is 64) - Add our own subscription helper to deal with the unbounded streams in substrate The most important things in this PR to review is the added helpers functions in `substrate/client/rpc/src/utils.rs` and the rest is pretty much chore. Regarding the "bounded buffer limit" it may cause the server to handle the JSON-RPC calls slower than before. The message size limit is bounded by "--rpc-response-size" thus "by default 10MB * 64 = 640MB" but the subscription message size is not covered by this limit and could be capped as well. Hopefully the last release prior to 1.0, sorry in advance for a big PR Previous attempt: https://github.com/paritytech/substrate/pull/13992 Resolves https://github.com/paritytech/polkadot-sdk/issues/748, resolves https://github.com/paritytech/polkadot-sdk/issues/627
-
- Jan 22, 2024
-
-
Marcin S. authored
The goal is to move all system chains on Rococo (+ other testnets?) to use async backing. Starting with `asset-hub-rococo` to get feedback, before I do the rest. ## Related Example: https://github.com/paritytech/polkadot-sdk/pull/1619/ Guide: https://github.com/w3f/polkadot-wiki/blob/master/docs/maintain/maintain-guides-async-backing.md --------- Co-authored-by:
-
joe petrowski authored
Clean up all the old syntax. --------- Co-authored-by: command-bot <> Co-authored-by:
Maksym H <[email protected]>
-
- Jan 19, 2024
-
-
Sergej Sakac authored
This PR introduces the following changes: - [x] Adds a `UniquesTransactor` to asset-hub-rococo - [x] Adds a `UniquesTransactor` to asset-hub-westend We can't add a transactor for `pallet-nfts` like we do for `pallet-uniques` because `pallet-nfts` uses `nonfungibles_v2::Mutate` instead of `nonfungibles::Mutate`, and making that work would be out of scope of this PR. With these modifications, reserve-based NFT cross-chain transfers can be performed on asset-hub. --------- Co-authored-by:
-
- Jan 18, 2024
-
-
Muharem Ismailov authored
Set up the `TakeFirstAssetTrader` trader for Westend and Rococo Asset Hubs to cover XCM fees with sufficient assets. This PR reintroduces previously [removed](https://github.com/paritytech/polkadot-sdk/pull/1845 ) trader setups, as it was decided to keep both traders, `TakeFirstAssetTrader` and `SwapFirstAssetTrader`, during the transition period. --------- Co-authored-by:
-
- Jan 17, 2024
-
-
Egor_P authored
This PR backports version bumps from release branch `release-polkadot-v1.6.0` back to `master` and also moved `prdoc` files related to the release to the appropriate folder
-
- Jan 16, 2024
-
-
Francisco Aguirre authored
# Note for reviewer Most changes are just syntax changes necessary for the new version. Most important files should be the ones under the `xcm` folder. # Description Added XCMv4. ## Removed `Multi` prefix The following types have been renamed: - MultiLocation -> Location - MultiAsset -> Asset - MultiAssets -> Assets - InteriorMultiLocation -> InteriorLocation - MultiAssetFilter -> AssetFilter - VersionedMultiAsset -> VersionedAsset - WildMultiAsset -> WildAsset - VersionedMultiLocation -> VersionedLocation In order to fix a name conflict, the `Assets` in `xcm-executor` were renamed to `HoldingAssets`, as they represent assets in holding. ## Removed `Abstract` asset id It was not being used anywhere and this simplifies the code. Now assets are just constructed as follows: ```rust let asset: Asset = (AssetId(Location::new(1, Here)), 100u128).into(); ``` No need for specifying `Concrete` anymore. ## Outcome is now a named fields struct Instead of ```rust pub enum Outcome { Complete(Weight), Incomplete(Weight, Error), Error(Error), } ``` we now have ```rust pub enum Outcome { Complete { used: Weight }, Incomplete { used: Weight, error: Error }, Error { error: Error }, } ``` ## Added Reanchorable trait Now both locations and assets implement this trait, making it easier to reanchor both. ## New syntax for building locations and junctions Now junctions are built using the following methods: ```rust let location = Location { parents: 1, interior: [Parachain(1000), PalletInstance(50), GeneralIndex(1984)].into() }; ``` or ```rust let location = Location::new(1, [Parachain(1000), PalletInstance(50), GeneralIndex(1984)]); ``` And they are matched like so: ```rust match location.unpack() { (1, [Parachain(id)]) => ... (0, Here) => ..., (1, [_]) => ..., } ``` This syntax is mandatory in v4, and has been also implemented for v2 and v3 for easier migration. This was needed to make all sizes smaller. # TODO - [x] Scaffold v4 - [x] Port github.com/paritytech/polkadot/pull/7236 - [x] Remove `Multi` prefix - [x] Remove `Abstract` asset id --------- Co-authored-by: command-bot <> Co-authored-by: -
Muharem Ismailov authored
Implements an XCM executor `WeightTrader`, facilitating fee payments in any asset that can be exchanged for a native asset. A few constraints need to be observed: - `buy_weight` and `refund` operations must be atomic, as another weight trader implementation might be attempted in case of failure. - swap credit must be utilized since there isn’t an account to which an asset of some class can be deposited with a guarantee to meet the existential deposit requirement. Also, operating with credits enhances the efficiency of the weight trader - https://github.com/paritytech/polkadot-sdk/pull/1677 related PRs: - (depends) https://github.com/paritytech/polkadot-sdk/pull/2031 - (depends) https://github.com/paritytech/polkadot-sdk/pull/1677 - (caused) https://github.com/paritytech/polkadot-sdk/pull/1847 - (caused) https://github.com/paritytech/polkadot-sdk/pull/1876 // DONE: impl `OnUnbalanced` for a `fungible/s` credit // DONE: make the trader free from a concept of a native currency and drop few fallible conversions. related issue - https://github.com/paritytech/polkadot-sdk/issues/1842 // DONE: tests --------- Co-authored-by:
-
- Dec 22, 2023
-
-
joe petrowski authored
- Updates all safe call filters to allow `system::authorize_upgrade`. - Updates Coretime safe call filter to allow `sudo` and `system_set_storage`. - Update Coretime teleports to allow teleportation with other system chains. --------- Co-authored-by:
-
- Dec 20, 2023
-
-
joe petrowski authored
Adds the `authorize_upgrade` -> `enact_authorized_upgrade` pattern to `frame-system`. This will be useful for upgrading bridged chains that are under the governance of Polkadot without passing entire runtime Wasm blobs over a bridge. Notes: - Changed `enact_authorized_upgrade` to `apply_authorized_upgrade`. Personal opinion, "apply" more accurately expresses what it's doing. Can change back if outvoted. - Remove `check_version` in favor of two extrinsics, so as to make _checked_ the default. - Left calls in `parachain-system` and marked as deprecated to prevent breaking the API. They just call into the `frame-system` functions. - Updated `frame-system` benchmarks to v2 syntax. --------- Co-authored-by: command-bot <>
-
Muharem Ismailov authored
closes https://github.com/paritytech/polkadot-sdk/issues/1842 Decoupling Pallet from the Concept of Native Currency Currently, the pallet is intrinsically linked with the concept of native currency, requiring users to provide implementations of the `fungible::*` and `fungibles::*` traits to interact with native and non native assets. This incapsulates some non-related to the pallet complexity and makes it less adaptable in contexts where the native currency concept is absent. With this PR, the dependence on `fungible::*` for liquidity-supplying assets has been removed. Instead, the native and non-native currencies' handling is now overseen by a single type that implements the `fungibles::*` traits. To simplify this integration, types have been introduced to facilitate the creation of a union between `fungible::*` and `fungibles::*` implementations, producing a unified `fungibles::*` type. One of the reasons driving these changes is the ambition to create a more user-friendly API for the `SwapCredit` implementation. Given that it interacts with two distinct credit types from `fungible` and `fungibles`, a unified type was introduced. Clients now manage potential conversion failures for those credit types. In certain contexts, it's vital to guarantee that operations are fail-safe, like in this impl - [PR](https://github.com/paritytech/polkadot-sdk/pull/1845), place in [code](https://github.com/paritytech/polkadot-sdk/blob/20b85a5fada8f55c98ba831964f5866ffeadf4da/cumulus/primitives/utility/src/lib.rs#L429). Additional Updates: - abstracted the pool ID and its account derivation logic via trait bounds, along with common implementation offerings; - removed `inc_providers` on a pool creation for the pool account; - benchmarks: -- swap complexity is N, not const; -- removed `From<u128> + Into<u128>` bound from `T::Balance`; -- removed swap/liquidity/.. amount constants, resolve them dynamically based on pallet configuration; -- migrated to v2 API; - `OnUnbalanced` handler for the pool creation fee, replacing direct transfers to a specified account ID; - renamed `MultiAssetId` to `AssetKind` aligning with naming across frame crates; related PRs: - (depends) https://github.com/paritytech/polkadot-sdk/pull/1677 - (caused) https://github.com/paritytech/polkadot-sdk/pull/2033 - (caused) https://github.com/paritytech/polkadot-sdk/pull/1876 --------- Co-authored-by:
-
- Dec 19, 2023
-
-
Muharem Ismailov authored
Introduces a swap implementation that allows the exchange of a credit (aka Negative Imbalance) of one asset for a credit of another asset. This is particularly useful when a credit swap is required but may not have sufficient value to meet the ED constraint, hence cannot be deposited to temp account before. An example use case is when XCM fees are paid using an asset held in the XCM executor registry and has to be swapped for native currency. Additional Updates: - encapsulates the existing `Swap` trait impl within a transactional context, since partial storage mutation is possible when an error occurs; - supplied `Currency` and `Assets` impls must be implemented over the same `Balance` type, the `AssetBalance` generic type is dropped. This helps to avoid numerous type conversion and overflow cases. If those types are different it should be handled outside of the pallet; - `Box` asset kind on a pallet level, unbox on a runtime level - here [why](https://substrate.stackexchange.com/questions/10039/boxed-argument-of-a-dispatchable/10103#10103); - `path` uses `Vec` now, instead of `BoundedVec` since it is never used in PoV; - removes the `Transfer` event due to it's redundancy with the events emitted by `fungible/s` implementations; - modifies the `SwapExecuted` event type; related issue: - https://github.com/paritytech/polkadot-sdk/issues/105 related PRs: - (required for) https://github.com/paritytech/polkadot-sdk/pull/1845 - (caused) https://github.com/paritytech/polkadot-sdk/pull/1717 // DONE make the pallet work only with `fungibles` trait and make it free from the concept of a `native` asset - https://github.com/paritytech/polkadot-sdk/issues/1842 --------- Co-authored-by:
-
- Dec 18, 2023
-
-
Branislav Kontur authored
This PR contains just a few clippy fixes and nits, which are, however, relaxed by workspace clippy settings here: https://github.com/paritytech/polkadot-sdk/blob/master/Cargo.toml#L483-L506 --------- Co-authored-by:
-
- Dec 14, 2023
-
-
Francisco Aguirre authored
In the move from the old `Currency` traits to the new `fungible/s` family of traits, we already had the `FungiblesAdapter` and `NonFungiblesAdapter` for multiple fungible and non fungible assets respectively. However, for handling only one fungible asset, we were missing a `FungibleAdapter`, and so used the old `CurrencyAdapter` instead. This PR aims to fill in that gap, and provide the new adapter for more updated examples. I marked the old `CurrencyAdapter` as deprecated as part of this PR, and I'll change it to the new `FungibleAdapter` in a following PR. The two stages are separated so as to not bloat this PR with some name fixes in tests. --------- Co-authored-by: command-bot <>
-
Egor_P authored
This PR backports `transaction_version` bump from `1.5.0` release back to `master`
-
- Dec 13, 2023
-
-
Branislav Kontur authored
Co-authored-by: command-bot <>
-
- Dec 12, 2023
-
-
Branislav Kontur authored
## Summary This pull request proposes a solution for improved control of the versioned XCM flow over the bridge (across different consensus chains) and resolves the situation where the sending chain/consensus has already migrated to a higher XCM version than the receiving chain/consensus. ## Problem/Motivation The current flow over the bridge involves a transfer from AssetHubRococo (AHR) to BridgeHubRococo (BHR) to BridgeHubWestend (BHW) and finally to AssetHubWestend (AHW), beginning with a reserve-backed transfer on AHR. In this process: 1. AHR sends XCM `ExportMessage` through `XcmpQueue`, incorporating XCM version checks using the `WrapVersion` feature, influenced by `pallet_xcm::SupportedVersion` (managed by `pallet_xcm::force_xcm_version` or version discovery). 2. BHR handles the `ExportMessage` instruction, utilizing the latest XCM version. The `HaulBlobExporter` converts the inner XCM to [`VersionedXcm::from`](https://github.com/paritytech/polkadot-sdk/blob/63ac2471aa0210f0ac9903bdd7d8f9351f9a635f/polkadot/xcm/xcm-builder/src/universal_exports.rs#L465-L467), also using the latest XCM version. However, challenges arise: - Incompatibility when BHW uses a different version than BHR. For instance, if BHR migrates to **XCMv4** while BHW remains on **XCMv3**, BHR's `VersionedXcm::from` uses `VersionedXcm::V4` variant, causing encoding issues for BHW. ``` /// Just a simulation of possible error, which could happen on BHW /// (this code is based on actual master without XCMv4) let encoded = hex_literal::hex!("0400"); println!("{:?}", VersionedXcm::<()>::decode(&mut &encoded[..])); Err(Error { cause: None, desc: "Could not decode `VersionedXcm`, variant doesn't exist" }) ``` - Similar compatibility issues exist between AHR and AHW. ## Solution This pull request introduces the following solutions: 1. **New trait `CheckVersion`** - added to the `xcm` module and exposing `pallet_xcm::SupportedVersion`. This enhancement allows checking the actual XCM version for desired destinations outside of the `pallet_xcm` module. 2. **Version Check in `HaulBlobExporter`** uses `CheckVersion` to check known/configured destination versions, ensuring compatibility. For example, in the scenario mentioned, BHR can store the version `3` for BHW. If BHR is on XCMv4, it will attempt to downgrade the message to version `3` instead of using the latest version `4`. 3. **Version Check in `pallet-xcm-bridge-hub-router`** - this check ensures compatibility with the real destination's XCM version, preventing the unnecessary sending of messages to the local bridge hub if versions are incompatible. These additions aim to improve the control and compatibility of XCM flows over the bridge and addressing issues related to version mismatches. ## Possible alternative solution _(More investigation is needed, and at the very least, it should extend to XCMv4/5. If this proves to be a viable option, I can open an RFC for XCM.)._ Add the `XcmVersion` attribute to the `ExportMessage` so that the sending chain can determine, based on what is stored in `pallet_xcm::SupportedVersion`, the version the destination is using. This way, we may not need to handle the version in `HaulBlobExporter`. ``` ExportMessage { network: NetworkId, destination: InteriorMultiLocation, xcm: Xcm<()> destination_xcm_version: Version, // <- new attritbute }, ``` ``` pub trait ExportXcm { fn validate( network: NetworkId, channel: u32, universal_source: &mut Option<InteriorMultiLocation>, destination: &mut Option<InteriorMultiLocation>, message: &mut Option<Xcm<()>>, destination_xcm_version: Version, , // <- new attritbute ) -> SendResult<Self::Ticket>; ``` ## Future Directions This PR does not fix version discovery over bridge, further investigation will be conducted here: https://github.com/paritytech/polkadot-sdk/issues/2417. ## TODO - [x] `pallet_xcm` mock for tests uses hard-coded XCM version `2` - change to 3 or lastest? - [x] fix `pallet-xcm-bridge-hub-router` - [x] fix HaulBlobExporter with version determination [here](https://github.com/paritytech/polkadot-sdk/blob/2183669d05f9b510f979a0cc3c7847707bacba2e/polkadot/xcm/xcm-builder/src/universal_exports.rs#L465) - [x] add unit-tests to the runtimes - [x] run benchmarks for `ExportMessage` - [x] extend local run scripts about `force_xcm_version(dest, version)` - [ ] when merged, prepare governance calls for Rococo/Westend - [ ] add PRDoc Part of: https://github.com/paritytech/parity-bridges-common/issues/2719 --------- Co-authored-by: command-bot <>
-
Chevdor authored
This PR introduces a script and some templates to use the prdoc involved in a release and build: - the changelog - a simple draft of audience documentation Since the prdoc presence was enforced in the middle of the version 1.5.0, not all PRs did come with a `prdoc` file. This PR creates all the missing `prdoc` files with some minimum content allowing to properly generate the changelog. The generated content is **not** suitable for the audience documentation. The audience documentation will be possible with the next version, when all PR come with a proper `prdoc`. ## Assumptions - the prdoc files for release `vX.Y.Z` have been moved under `prdoc/X.Y.Z` - the changelog requires for now for the prdoc files to contain author + topic. Thos fields are optional. The build script can be called as: ``` VERSION=X.Y.Z ./scripts/release/build-changelogs.sh ``` Related: - #1408 --------- Co-authored-by:
-
- Dec 08, 2023
-
-
Muharem Ismailov authored
Treasury Pallet Instance for the Fellowship in Westend Collectives. In this update, we present a Treasury Pallet Instance that is under the control of the Fellowship body, with oversight from the Root and Treasurer origins. Here's how it is governed: - the Root origin have the authority to reject or approve spend proposals, with no amount limit for approvals. - the Treasurer origin have the authority to reject or approve spend proposals, with approval limits of up to 10,000,000 DOT. - Voice of all Fellows ranked at 3 or above can reject or approve spend proposals, with a maximum approval limit of 10,000 DOT. - Voice of Fellows ranked at 4 or above can also reject or approve spend proposals, with a maximum approval limit of 10,000,000 DOT. Additionally, we introduce the Asset Rate Pallet Instance to establish conversion rates from asset A to B. This is used to determine if a proposed spend amount involving a non-native asset is permissible by the commanding origin. The rates can be set up by the Root, Treasurer origins, or Voice of all Fellows. --------- Co-authored-by:
-
