- Feb 02, 2024
-
-
Branislav Kontur authored
## TODO - [x] change constants when CI fails (should fail :) ) ## Result On the AssetHubRococo: 1701175800126 -> 1700929825257 = 0.15 % decreased. ``` # Before ( [xcm] Fix `SovereignPaidRemoteExporter` and `DepositAsset` handling (#3157)) Feb 02 12:59:05.520 ERROR bridges::estimate: `bridging::XcmBridgeHubRouterBaseFee` actual value: 1701175800126 for runtime: statemine-1006000 (statemine-0.tx14.au1) # After Feb 02 13:02:40.647 ERROR bridges::estimate: `bridging::XcmBridgeHubRouterBaseFee` actual value: 1700929825257 for runtime: statemine-1006000 (statemine-0.tx14.au1) ``` On the AssetHubWestend: 2116038876326 -> 1641718372993 = 22.4 % decreased. ``` # Before ( [xcm] Fix `SovereignPaidRemoteExporter` and `DepositAsset` handling (#3157)) Feb 02 12:56:00.880 ERROR bridges::estimate: `bridging::XcmBridgeHubRouterBaseFee` actual value: 2116038876326 for runtime: westmint-1006000 (westmint-0.tx14.au1) # After Feb 02 13:04:42.515 ERROR bridges::estimate: `bridging::XcmBridgeHubRouterBaseFee` actual value: 1641718372993 for runtime: westmint-1006000 (westmint-0.tx14.au1) ```
-
- Jan 31, 2024
-
-
Oliver Tale-Yazdi authored
Fixup for https://github.com/paritytech/polkadot-sdk/pull/2587 to make the `core-fellowship` crate work with swapped members. Adds a `MemberSwappedHandler` to the `ranked-collective` pallet that are implemented by `core-fellowship+salary`. There is are exhaustive tests [here](https://github.com/paritytech/polkadot-sdk/blob/72aa7ac17a0e5b16faab5d2992aa2db2e01b05d0/substrate/frame/core-fellowship/src/tests/integration.rs#L338) and [here](https://github.com/paritytech/polkadot-sdk/blob/ab3cdb05a5ebc1ff841f8dda67edef0ea40bbba5/substrate/frame/salary/src/tests/integration.rs#L224 ) to check that adding member `1` is equivalent to adding member `0` and then swapping. --------- Signed-off-by:
Oliver Tale-Yazdi <[email protected]>
-
Branislav Kontur authored
This PR addresses two issues: - It modifies `DepositAsset`'s asset filter from `All` to `AllCounted(1)` to prevent potentially charging excessive weight/fees. This adjustment avoids situations where fees could be calculated based on the count of assets, as illustrated [here](https://github.com/paritytech/polkadot-sdk/blob/master/cumulus/parachains/runtimes/bridge-hubs/bridge-hub-rococo/src/weights/xcm/mod.rs#L38-L46). - It encapsulates `DepositAsset` with `SetAppendix` to ensure that `fees` are not trapped in any case. For instance, this prevents issues when `ExportXcm::validate` encounters an error during the processing of `ExportMessage`.
-
Adrian Catangiu authored
This fix aims to solve an issue in Kusama that resulted in failed reserve asset transfers. During multi-hop XCMs, like reserve asset transfers where the reserve is not the sender nor the destination, but a third remote chain, the origin is not available to pay for delivery fees out of their account directly, so delivery fees should be paid out of transferred assets. This commit also adds an xcm-emulator regression test that validates this scenario is now working. Signed-off-by:
Adrian Catangiu <[email protected]> Co-authored-by:
Francisco Aguirre <[email protected]>
-
Branislav Kontur authored
[frame] `#[pallet::composite_enum]` improved variant count handling + removed `pallet_balances`'s `MaxHolds` config (#2657) I started this investigation/issue based on @liamaharon question [here](https://github.com/paritytech/polkadot-sdk/pull/1801#discussion_r1410452499). ## Problem The `pallet_balances` integrity test should correctly detect that the runtime has correct distinct `HoldReasons` variant count. I assume the same situation exists for RuntimeFreezeReason. It is not a critical problem, if we set `MaxHolds` with a sufficiently large value, everything should be ok. However, in this case, the integrity_test check becomes less useful. **Situation for "any" runtime:** - `HoldReason` enums from different pallets: ```rust /// from pallet_nis #[pallet::composite_enum] pub enum HoldReason { NftReceipt, } /// from pallet_preimage #[pallet::composite_enum] pub enum HoldReason { Preimage, } // from pallet_state-trie-migration #[pallet::composite_enum] pub enum HoldReason { SlashForContinueMigrate, SlashForMigrateCustomTop, SlashForMigrateCustomChild, } ``` - generated `RuntimeHoldReason` enum looks like: ```rust pub enum RuntimeHoldReason { #[codec(index = 32u8)] Preimage(pallet_preimage::HoldReason), #[codec(index = 38u8)] Nis(pallet_nis::HoldReason), #[codec(index = 42u8)] StateTrieMigration(pallet_state_trie_migration::HoldReason), } ``` - composite enum `RuntimeHoldReason` variant count is detected as `3` - we set `type MaxHolds = ConstU32<3>` - `pallet_balances::integrity_test` is ok with `3`(at least 3) However, the real problem can occur in a live runtime where some functionality might stop working. This is due to a total of 5 distinct hold reasons (for pallets with multi-instance support, it is even more), and not all of them can be used because of an incorrect `MaxHolds`, which is deemed acceptable according to the `integrity_test`: ``` // pseudo-code - if we try to call all of these: T::Currency::hold(&pallet_nis::HoldReason::NftReceipt.into(), &nft_owner, deposit)?; T::Currency::hold(&pallet_preimage::HoldReason::Preimage.into(), &nft_owner, deposit)?; T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForContinueMigrate.into(), &nft_owner, deposit)?; // With `type MaxHolds = ConstU32<3>` these two will fail T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomTop.into(), &nft_owner, deposit)?; T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomChild.into(), &nft_owner, deposit)?; ``` ## Solutions A macro `#[pallet::*]` expansion is extended of `VariantCount` implementation for the `#[pallet::composite_enum]` enum type. This expansion generates the `VariantCount` implementation for pallets' `HoldReason`, `FreezeReason`, `LockId`, and `SlashReason`. Enum variants must be plain enum values without fields to ensure a deterministic count. The composite runtime enum, `RuntimeHoldReason` and `RuntimeFreezeReason`, now sets `VariantCount::VARIANT_COUNT` as the sum of pallets' enum `VariantCount::VARIANT_COUNT`: ```rust #[frame_support::pallet(dev_mode)] mod module_single_instance { #[pallet::composite_enum] pub enum HoldReason { ModuleSingleInstanceReason1, ModuleSingleInstanceReason2, } ... } #[frame_support::pallet(dev_mode)] mod module_multi_instance { #[pallet::composite_enum] pub enum HoldReason<I: 'static = ()> { ModuleMultiInstanceReason1, ModuleMultiInstanceReason2, ModuleMultiInstanceReason3, } ... } impl self::sp_api_hidden_includes_construct_runtime::hidden_include::traits::VariantCount for RuntimeHoldReason { const VARIANT_COUNT: u32 = 0 + module_single_instance::HoldReason::VARIANT_COUNT + module_multi_instance::HoldReason::<module_multi_instance::Instance1>::VARIANT_COUNT + module_multi_instance::HoldReason::<module_multi_instance::Instance2>::VARIANT_COUNT + module_multi_instance::HoldReason::<module_multi_instance::Instance3>::VARIANT_COUNT; } ``` In addition, `MaxHolds` is removed (as suggested [here](https://github.com/paritytech/polkadot-sdk/pull/2657#discussion_r1443324573)) from `pallet_balances`, and its `Holds` are now bounded to `RuntimeHoldReason::VARIANT_COUNT`. Therefore, there is no need to let the runtime specify `MaxHolds`. ## For reviewers Relevant changes can be found here: - `substrate/frame/support/procedural/src/lib.rs` - `substrate/frame/support/procedural/src/pallet/parse/composite.rs` - `substrate/frame/support/procedural/src/pallet/expand/composite.rs` - `substrate/frame/support/procedural/src/construct_runtime/expand/composite_helper.rs` - `substrate/frame/support/procedural/src/construct_runtime/expand/hold_reason.rs` - `substrate/frame/support/procedural/src/construct_runtime/expand/freeze_reason.rs` - `substrate/frame/support/src/traits/misc.rs` And the rest of the files is just about removed `MaxHolds` from `pallet_balances` ## Next steps Do the same for `MaxFreezes` https://github.com/paritytech/polkadot-sdk/issues/2997 . --------- Co-authored-by: command-bot <> Co-authored-by:
Bastian Köcher <[email protected]> Co-authored-by:
Dónal Murray <[email protected]> Co-authored-by:
gupnik <[email protected]>
-
Branislav Kontur authored
The `parachains-common` contains a lots of constants and type definitions which are used for `polkadot-sdk`'s testnet runtimes and also for `polkadot-fellows`'s production [SP runtimes](https://github.com/polkadot-fellows/runtimes/tree/main/system-parachains/constants). This PR cleans `parachains-common` module to contain only common and generic functionality. Testnet-specific constants have been moved to the separate module dedicated just for testnets: `polkadot-sdk/cumulus/parachains/runtimes/constants/` Part of: https://github.com/paritytech/polkadot-sdk/issues/3054 --------- Co-authored-by:
georgepisaltu <[email protected]>
-
- Jan 30, 2024
-
-
Oliver Tale-Yazdi authored
Add `Balances::force_adjust_total_issuance` as preparation for fixing https://github.com/polkadot-fellows/runtimes/issues/147 . Important changes in `substrate/frame/balances/src/lib.rs`. TODO: - [x] Update weights --------- Signed-off-by:
Oliver Tale-Yazdi <[email protected]> Co-authored-by: command-bot <> Co-authored-by:
Bastian Köcher <[email protected]>
-
dharjeezy authored
closes https://github.com/polkadot-fellows/help-center/issues/1 --------- Signed-off-by:
Oliver Tale-Yazdi <[email protected]> Co-authored-by: command-bot <> Co-authored-by:
Oliver Tale-Yazdi <[email protected]>
-
Clara van Staden authored
To deploy https://github.com/paritytech/polkadot-sdk/pull/3029 Co-authored-by: claravanstaden <Cats 4 life!>
-
Oliver Tale-Yazdi authored
Reverts paritytech/polkadot-sdk#2302.
🤦 ♂️ should have checked the migration CI first. We either need to reduce the `max_message_size` for the open HRMP channels on the failing chains or increase the `PageSize` of the XCMP queue. Both would be fine on a test-net, but i assume this will also fail before the next SP runtime upgrade so first need to think what best to do. AFAIK its not possible currently to change the `max_message_size` of an open HRMP channel. -
Clara van Staden authored
- Prepares for the Deneb hardfork on Sepolia testnet on 31 January (needs to be deployed to Rococo before then) - Removes `beacon-minimal-spec` flag for simpler config - Adds test comments --------- Co-authored-by:
Ron <[email protected]> Co-authored-by: claravanstaden <Cats 4 life!> Co-authored-by:
Alistair Singh <[email protected]>
-
- Jan 29, 2024
-
-
Oliver Tale-Yazdi authored
Remove `without_storage_info` from the XCMP queue pallet. Part of https://github.com/paritytech/polkadot-sdk/issues/323 Changes: - Limit the number of channels that can be suspended at the same time. - Limit the number of channels that can have messages or signals pending at the same time. A No-OP migration is put in place to ensure that all `BoundedVec`s still decode and not truncate after upgrade. The storage version is thereby bumped to 4 to have our tooling remind us to deploy that migration. --------- Signed-off-by:
Oliver Tale-Yazdi <[email protected]> Co-authored-by:
Francisco Aguirre <[email protected]>
-
- Jan 27, 2024
-
-
Sergej Sakac authored
This PR allows Coretime regions to be transferable via XCM. --------- Co-authored-by:
Dónal Murray <[email protected]>
-
- Jan 26, 2024
-
-
Liam Aharon authored
Related https://github.com/paritytech/polkadot-sdk/issues/3032 --- Using https://github.com/liamaharon/cargo-workspace-version-tools/ `cargo run -- sync --path ../polkadot-sdk` --------- Signed-off-by:
Oliver Tale-Yazdi <[email protected]> Co-authored-by:
Oliver Tale-Yazdi <[email protected]>
-
- Jan 25, 2024
-
-
RadiumBlock authored
We would like to add our RadiumBlock bootnode to collectives-westend parachain
-
- Jan 24, 2024
-
-
Just van Stam authored
Moved from: https://github.com/paritytech/polkadot/pull/6951 closes https://github.com/paritytech/polkadot-sdk/issues/490 - [x] update cumulus --- This PR introduces transactional processing of certain xcm instructions. For the list of instructions checkout https://github.com/paritytech/polkadot-sdk/issues/490. The transactional processing is implemented as an xcm-executor config item. The two implementations in this PR are `FrameTransactionalProcessor` and `()`. The `()` implementation does no transactional processing. Each implementation of the `ProcessTransaction` trait has an `IS_TRANSACTIONAL` const that tells the XCVM if transactional processing is actually implemented. If Transactional processing is implemented, changes to touched registers should also be rolled back to prevent inconsistencies. Note for reviewers: Check out the following safety assumption: https://github.com/paritytech/polkadot-sdk/pull/1222/files#diff-4effad7d8c1c9de19fd27e18661cbf2128c8718f3b2420a27d2f816e0749ea53R30 --------- Co-authored-by:
Keith Yeung <[email protected]> Co-authored-by:
Francisco Aguirre <[email protected]> Co-authored-by: command-bot <>
-
Branislav Kontur authored
This PR avoids automatically pulling rococo/westend runtime constants into the runtime by default. Usually, we have testnet runtimes dedicated to rococo or westend, and therefore, we don't need both dependencies. Additionally, it prevents pulling rococo/westend-related items into the `polkadot-fellows` repo, as seen in the Cargo.lock [here](https://github.com/polkadot-fellows/runtimes/blob/main/Cargo.lock#L14137-L14151) and [here](https://github.com/polkadot-fellows/runtimes/blob/main/Cargo.lock#L9756-L9770 ). --------- Co-authored-by:
Adrian Catangiu <[email protected]>
-
Branislav Kontur authored
## Summary This PR consolidates `pallet-state-trie-migration` as a part of https://github.com/paritytech/polkadot-sdk/issues/226 / https://github.com/paritytech/polkadot-sdk/issues/171: `pallet-state-trie-migration`: - [x] replace `Currency` with `fungible` traits - [x] run benchmarks - [x] refactor to `DefaultConfig` `pallet_nicks`: - [x] remove others: - [x] remove `as Fn*` or `asFun*` stuff based on discussion [here](https://github.com/paritytech/polkadot-sdk/issues/226#issuecomment-1822861445 ) --------- Co-authored-by:
Richard Melkonian <[email protected]> Co-authored-by: command-bot <>
-
- Jan 23, 2024
-
-
Branislav Kontur authored
There were several improvements and PRs that didn't apply to all runtimes, so this PR attempts to align those small differences. In addition, the PR eliminates unused dependencies across multiple modules. Relates to PR for `polkadot-fellows`: https://github.com/polkadot-fellows/runtimes/pull/154
-
joe petrowski authored
-
Niklas Adolfsson authored
This is a rather big change in jsonrpsee, the major things in this bump are: - Server backpressure (the subscription impls are modified to deal with that) - Allow custom error types / return types (remove jsonrpsee::core::Error and jsonrpee::core::CallError) - Bug fixes (graceful shutdown in particular not used by substrate anyway) - Less dependencies for the clients in particular - Return type requires Clone in method call responses - Moved to tokio channels - Async subscription API (not used in this PR) Major changes in this PR: - The subscriptions are now bounded and if subscription can't keep up with the server it is dropped - CLI: add parameter to configure the jsonrpc server bounded message buffer (default is 64) - Add our own subscription helper to deal with the unbounded streams in substrate The most important things in this PR to review is the added helpers functions in `substrate/client/rpc/src/utils.rs` and the rest is pretty much chore. Regarding the "bounded buffer limit" it may cause the server to handle the JSON-RPC calls slower than before. The message size limit is bounded by "--rpc-response-size" thus "by default 10MB * 64 = 640MB" but the subscription message size is not covered by this limit and could be capped as well. Hopefully the last release prior to 1.0, sorry in advance for a big PR Previous attempt: https://github.com/paritytech/substrate/pull/13992 Resolves https://github.com/paritytech/polkadot-sdk/issues/748, resolves https://github.com/paritytech/polkadot-sdk/issues/627
-
- Jan 22, 2024
-
-
Marcin S. authored
The goal is to move all system chains on Rococo (+ other testnets?) to use async backing. Starting with `asset-hub-rococo` to get feedback, before I do the rest. ## Related Example: https://github.com/paritytech/polkadot-sdk/pull/1619/ Guide: https://github.com/w3f/polkadot-wiki/blob/master/docs/maintain/maintain-guides-async-backing.md --------- Co-authored-by:
Branislav Kontur <[email protected]> Co-authored-by:
Dónal Murray <[email protected]>
-
joe petrowski authored
Clean up all the old syntax. --------- Co-authored-by: command-bot <> Co-authored-by:
gupnik <[email protected]> Co-authored-by:
Nikhil Gupta <[email protected]> Co-authored-by:
Maksym H <[email protected]>
-
- Jan 19, 2024
-
-
Serban Iorga authored
Update bridges subtree
-
Sergej Sakac authored
This PR introduces the following changes: - [x] Adds a `UniquesTransactor` to asset-hub-rococo - [x] Adds a `UniquesTransactor` to asset-hub-westend We can't add a transactor for `pallet-nfts` like we do for `pallet-uniques` because `pallet-nfts` uses `nonfungibles_v2::Mutate` instead of `nonfungibles::Mutate`, and making that work would be out of scope of this PR. With these modifications, reserve-based NFT cross-chain transfers can be performed on asset-hub. --------- Co-authored-by:
joe petrowski <[email protected]>
-
- Jan 18, 2024
-
-
Muharem Ismailov authored
Set up the `TakeFirstAssetTrader` trader for Westend and Rococo Asset Hubs to cover XCM fees with sufficient assets. This PR reintroduces previously [removed](https://github.com/paritytech/polkadot-sdk/pull/1845 ) trader setups, as it was decided to keep both traders, `TakeFirstAssetTrader` and `SwapFirstAssetTrader`, during the transition period. --------- Co-authored-by:
Svyatoslav Nikolsky <[email protected]>
-
joe petrowski authored
Order: - [x] Start People Chain - [RPC node](https://polkadot.js.org/apps/?rpc=wss%3A%2F%2Frococo-people-rpc.polkadot.io#/explorer) - [x] Upgrade Rococo Relay (`EnsureRoot` -> `EnsureSigned`) (v1,006,002) - Done [here](https://rococo.subscan.io/extrinsic/0xef07e0f9dbb2b9e829305f132e6ce45d291239286e409177e20895e6687daa6c) - [x] Migrate all identities - Done, see extrinsics from [this account](https://rococo.subscan.io/account/5FyNYrBwndvBttTkGUqGGCRAXtBH4Mh8xELDaxaFywTsjDKb) - [x] Upgrade Rococo People (remove call filter) (v1,006,002) - Authorized [here](https://rococo.subscan.io/extrinsic/0xedf6a80229bd411b7ed8d3a489a767b0f773bed5c49239987a294c293a35b98b) With added: - [x] Upgrade Rococo People to fix `poke_deposit` bug (v1,006,001) - Authorized [here](https://rococo.subscan.io/extrinsic/0xd1dc3cd6e8274bd0196f8d9f13ed09f6e9c76e6a40f9786a1629f4cb22cf948d) Note: It's also possible to remove the Identity Migrator pallet from both the Relay Chain and the parachain at this time. I will leave them in for now to preserve the test cases until we run them on Kusama/Polkadot. We will also want a follow up to remove all Identity-related state from the Relay Chain.
-
- Jan 17, 2024
-
-
Egor_P authored
This PR backports version bumps from release branch `release-polkadot-v1.6.0` back to `master` and also moved `prdoc` files related to the release to the appropriate folder
-
Ignacio Palacios authored
After People Rococo deployment, we noticed that `safeXcmVersion` wasn't initialised. I think it is due to `Storage` missing in the pallet's declaration. This PR should fix it.
-
- Jan 16, 2024
-
-
Francisco Aguirre authored
# Note for reviewer Most changes are just syntax changes necessary for the new version. Most important files should be the ones under the `xcm` folder. # Description Added XCMv4. ## Removed `Multi` prefix The following types have been renamed: - MultiLocation -> Location - MultiAsset -> Asset - MultiAssets -> Assets - InteriorMultiLocation -> InteriorLocation - MultiAssetFilter -> AssetFilter - VersionedMultiAsset -> VersionedAsset - WildMultiAsset -> WildAsset - VersionedMultiLocation -> VersionedLocation In order to fix a name conflict, the `Assets` in `xcm-executor` were renamed to `HoldingAssets`, as they represent assets in holding. ## Removed `Abstract` asset id It was not being used anywhere and this simplifies the code. Now assets are just constructed as follows: ```rust let asset: Asset = (AssetId(Location::new(1, Here)), 100u128).into(); ``` No need for specifying `Concrete` anymore. ## Outcome is now a named fields struct Instead of ```rust pub enum Outcome { Complete(Weight), Incomplete(Weight, Error), Error(Error), } ``` we now have ```rust pub enum Outcome { Complete { used: Weight }, Incomplete { used: Weight, error: Error }, Error { error: Error }, } ``` ## Added Reanchorable trait Now both locations and assets implement this trait, making it easier to reanchor both. ## New syntax for building locations and junctions Now junctions are built using the following methods: ```rust let location = Location { parents: 1, interior: [Parachain(1000), PalletInstance(50), GeneralIndex(1984)].into() }; ``` or ```rust let location = Location::new(1, [Parachain(1000), PalletInstance(50), GeneralIndex(1984)]); ``` And they are matched like so: ```rust match location.unpack() { (1, [Parachain(id)]) => ... (0, Here) => ..., (1, [_]) => ..., } ``` This syntax is mandatory in v4, and has been also implemented for v2 and v3 for easier migration. This was needed to make all sizes smaller. # TODO - [x] Scaffold v4 - [x] Port github.com/paritytech/polkadot/pull/7236 - [x] Remove `Multi` prefix - [x] Remove `Abstract` asset id --------- Co-authored-by: command-bot <> Co-authored-by:
Keith Yeung <[email protected]>
-
Dónal Murray authored
Co-authored-by: command-bot <>
-
Muharem Ismailov authored
Implements an XCM executor `WeightTrader`, facilitating fee payments in any asset that can be exchanged for a native asset. A few constraints need to be observed: - `buy_weight` and `refund` operations must be atomic, as another weight trader implementation might be attempted in case of failure. - swap credit must be utilized since there isn’t an account to which an asset of some class can be deposited with a guarantee to meet the existential deposit requirement. Also, operating with credits enhances the efficiency of the weight trader - https://github.com/paritytech/polkadot-sdk/pull/1677 related PRs: - (depends) https://github.com/paritytech/polkadot-sdk/pull/2031 - (depends) https://github.com/paritytech/polkadot-sdk/pull/1677 - (caused) https://github.com/paritytech/polkadot-sdk/pull/1847 - (caused) https://github.com/paritytech/polkadot-sdk/pull/1876 // DONE: impl `OnUnbalanced` for a `fungible/s` credit // DONE: make the trader free from a concept of a native currency and drop few fallible conversions. related issue - https://github.com/paritytech/polkadot-sdk/issues/1842 // DONE: tests --------- Co-authored-by:
joe petrowski <[email protected]> Co-authored-by:
Liam Aharon <[email protected]>
-
Bastian Köcher authored
- Do not disable `std` feature in the integration tests - `contracts-fixtures` test should only check for `riscv` build when the feature is enabled
-
- Jan 10, 2024
-
-
Clara van Staden authored
- updates snowbridge crates to `0.9.0` - updates Cargo.toml files in preparation for publishing to crates.io - adds Kusama and Polkadot Snowbridge runtime config crates - moves runtime tests from the Snowbridge subtree into the bridge hub tests dir --------- Co-authored-by: claravanstaden <Cats 4 life!> Co-authored-by:
Ron <[email protected]>
-
joe petrowski authored
This PR allows _username authorities_ to issue unique usernames that correspond with an account. It also provides two-way lookup, that is from `AccountId` to a single, "primary" `Username` (alongside `Registration`) and multiple unique `Username`s to an `AccountId`. Key features: - Username Authorities added (and removed) via privileged origin. - Authorities have a `suffix` and an `allocation`. They can grant up to `allocation` usernames. Their `suffix` will be appended to the usernames that they issue. A suffix may be up to 7 characters long. - Users can ask an authority to grant them a username. This will take the form `myusername.suffix`. The entire name (including suffix) must be less than or equal to 32 alphanumeric characters. - Users can approve a username for themselves in one of two ways (that is, authorities cannot grant them arbitrarily): - Pre-sign the entire username (including suffix) with a secret key that corresponds to their `AccountId` (for keyed accounts, obviously); or - Accept the username after it has been granted by an authority (it will be queued until accepted) (for non-keyed accounts like pure proxies or multisigs). - The system does not require any funds or deposits. Users without an identity will be given a default one (presumably all fields set to `None`). If they update this info, they will need to place the normal storage deposit. - If a user does not have any username, their first one will be set as `Primary`, and their `AccountId` will map to that one. If they get subsequent usernames, they can choose which one to be their primary via `set_primary_username`. - There are some state cleanup functions to remove expired usernames that have not been accepted and dangling usernames whose owners have called `clear_identity`. TODO: - [x] Add migration to runtimes - [x] Probably do off-chain migration into People Chain genesis - [x] Address a few TODO questions in code (please review) --------- Co-authored-by:
Liam Aharon <[email protected]> Co-authored-by:
Gonçalo Pestana <[email protected]> Co-authored-by:
Oliver Tale-Yazdi <[email protected]> Co-authored-by:
Dónal Murray <[email protected]>
-
dependabot[bot] authored
Bumps [lycheeverse/lychee-action](https://github.com/lycheeverse/lychee-action) from 2ac9f030ccdea0033e2510a23a67da2a2da98492 to fdea7032675810093199f485fe075f057cc37b3e. <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/lycheeverse/lychee-action/commit/fdea7032675810093199f485fe075f057cc37b3e"><code>fdea703</code></a> Update secure git hash for 1.9.0</li> <li><a href="https://github.com/lycheeverse/lychee-action/commit/22134d37a1fff6c2974df9c92a7c7e1e86a08f9c"><code>22134d3</code></a> Bump version to 1.9.0</li> <li><a href="https://github.com/lycheeverse/lychee-action/commit/ebd95ebde89b46eaf3567432efb0b52bad2187d7"><code>ebd95eb</code></a> Update to latest lychee 0.14.0</li> <li><a href="https://github.com/lycheeverse/lychee-action/commit/37d79d3b6eda9990480a57eed21c847792dec37a"><code>37d79d3</code></a> Add integration tests for absolute output path and <code>--dump</code> (<a href="https://redirect.github.com/lycheeverse/lychee-action/issues/218">#218</a>)</li> <li><a href="https://github.com/lycheeverse/lychee-action/commit/57219e4f1d23b32484889db3dbd73f6b814c9bfa"><code>57219e4</code></a> Add integration test for custom output paths (<a href="https://redirect.github.com/lycheeverse/lychee-action/issues/1309">#1309</a>) (<a href="https://redirect.github.com/lycheeverse/lychee-action/issues/217">#217</a>)</li> <li><a href="https://github.com/lycheeverse/lychee-action/commit/a4282891d5805c0d9df0c0d524e2e95a3b0d1ac5"><code>a428289</code></a> fix: cleanup if statement (<a href="https://redirect.github.com/lycheeverse/lychee-action/issues/215">#215</a>)</li> <li><a href="https://github.com/lycheeverse/lychee-action/commit/ef8c8f32c278e9eed290c6e6c96748f16b6cd335"><code>ef8c8f3</code></a> Add documentation on using the <code>--base</code> param when testing local files (<a href="https://redirect.github.com/lycheeverse/lychee-action/issues/211">#211</a>)</li> <li>See full diff in <a href="https://github.com/lycheeverse/lychee-action/compare/2ac9f030ccdea0033e2510a23a67da2a2da98492...fdea7032675810093199f485fe075f057cc37b3e ">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> --------- Signed-off-by:
dependabot[bot] <[email protected]> Signed-off-by:
Oliver Tale-Yazdi <[email protected]> Co-authored-by:
dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by:
Oliver Tale-Yazdi <[email protected]> Co-authored-by:
PG Herveou <[email protected]>
-
- Jan 09, 2024
-
-
Clara van Staden authored
- Includes the introduction of the `fast-runtime` feature, which cleans up our features - Updates beacon client fork versions config to Sepolia's versions - Cleanup of AgentIdOf --------- Co-authored-by:
Ron <[email protected]> Co-authored-by: claravanstaden <Cats 4 life!>
-
- Jan 08, 2024
-
-
Bastian Köcher authored
This adds a Zombienet test for Coretime. Requires: https://github.com/paritytech/polkadot-sdk/pull/2862 --------- Co-authored-by:
Javier Viola <[email protected]> Co-authored-by:
Javier Viola <[email protected]>
-
- Jan 07, 2024
-
-
dependabot[bot] authored
Bumps the known_good_semver group with 4 updates: [serde](https://github.com/serde-rs/serde), [serde_json](https://github.com/serde-rs/json), [clap](https://github.com/clap-rs/clap) and [syn](https://github.com/dtolnay/syn). Updates `serde` from 1.0.194 to 1.0.195 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/serde/releases">serde's releases</a>.</em></p> <blockquote> <h2>v1.0.195</h2> <ul> <li>Prevent remote definitions of tuple struct or tuple variant from triggering dead_code warning (<a href="https://redirect.github.com/serde-rs/serde/issues/2671">#2671</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/serde/commit/03eec42c3313b36da416be1486e9ecac345784d5"><code>03eec42</code></a> Release 1.0.195</li> <li><a href="https://github.com/serde-rs/serde/commit/196f311ae2fd8ad94fe38a57830419859a4d3dbb"><code>196f311</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2671">#2671</a> from dtolnay/deadremote</li> <li><a href="https://github.com/serde-rs/serde/commit/38d9e0b2091e9b6150486c2c37367819b86bcc39"><code>38d9e0b</code></a> Revert "Add FIXME to fix dead_code warning when using serde(remote)"</li> <li><a href="https://github.com/serde-rs/serde/commit/6502b3131697eff6420786ad71f87f29cfff3a13"><code>6502b31</code></a> Fix new dead_code warning in tuple struct and tuple variant remote defs</li> <li><a href="https://github.com/serde-rs/serde/commit/6f1a8c3115c8d2502178c25d610fbaee2e82c46b"><code>6f1a8c3</code></a> Add FIXME to fix dead_code warning when using serde(remote)</li> <li><a href="https://github.com/serde-rs/serde/commit/d883c94cc9fe72d0512dc7f4def7191a401595c9"><code>d883c94</code></a> Work around dead_code warning in tests</li> <li><a href="https://github.com/serde-rs/serde/commit/961fa59a7469c5b5e323b9723323df412048d60d"><code>961fa59</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2670">#2670</a> from serde-rs/exhaustive</li> <li><a href="https://github.com/serde-rs/serde/commit/8bc71def551df190e6817d3311e5c76f751f53e6"><code>8bc71de</code></a> Fill in omitted patterns for GenericArguments match</li> <li><a href="https://github.com/serde-rs/serde/commit/7c65a9dc0eab2d4d829b258a7b3549351bbe8dcd"><code>7c65a9d</code></a> Pick up changes to non_exhaustive_omitted_patterns lint</li> <li>See full diff in <a href="https://github.com/serde-rs/serde/compare/v1.0.194...v1.0.195">compare view</a></li> </ul> </details> <br /> Updates `serde_json` from 1.0.110 to 1.0.111 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/json/releases">serde_json's releases</a>.</em></p> <blockquote> <h2>v1.0.111</h2> <ul> <li>Improve floating point parsing performance on loongarch64 (<a href="https://redirect.github.com/serde-rs/json/issues/1100">#1100</a>, thanks <a href="https://github.com/heiher"><code>@heiher</code></a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/json/commit/0131ac68212e8094bd14ee618587d731b4f9a68b"><code>0131ac6</code></a> Release 1.0.111</li> <li><a href="https://github.com/serde-rs/json/commit/96ecfadd3f7dd6366a2d07a098e228d15df93cb4"><code>96ecfad</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/json/issues/1100">#1100</a> from heiher/limb-64-la64</li> <li><a href="https://github.com/serde-rs/json/commit/c80dbaf8ff5902ca670e0a48bbe495065b9314f5"><code>c80dbaf</code></a> Set limb width to 64 for loongarch64</li> <li>See full diff in <a href="https://github.com/serde-rs/json/compare/v1.0.110...v1.0.111">compare view</a></li> </ul> </details> <br /> Updates `clap` from 4.4.12 to 4.4.13 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/releases">clap's releases</a>.</em></p> <blockquote> <h2>v4.4.13</h2> <h2>[4.4.13] - 2024-01-04</h2> <h3>Documentation</h3> <ul> <li>Fix link to structopt migration guide</li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's changelog</a>.</em></p> <blockquote> <h2>[4.4.13] - 2024-01-04</h2> <h3>Documentation</h3> <ul> <li>Fix link to structopt migration guide</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/clap-rs/clap/commit/2ab48b295c2463ce8c141a9868095b811ccf3b99"><code>2ab48b2</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/7a06a8cd619db704c6d826bf752eae3b86ce23a8"><code>7a06a8c</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/cca190efedf40f48147a3a4a777a9cc17728abdf"><code>cca190e</code></a> docs: Correct link to StructOpt migration guide</li> <li><a href="https://github.com/clap-rs/clap/commit/5c31f453c1a9f46109db8e0a47ed212748c0556c"><code>5c31f45</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5281">#5281</a> from Manishearth/safety-docs</li> <li><a href="https://github.com/clap-rs/clap/commit/ddae7e6f411c4c87294212152b8d9beea16637e7"><code>ddae7e6</code></a> Correct safety docs</li> <li><a href="https://github.com/clap-rs/clap/commit/48d28aa689bfd0fb44ec025244b30ba261e2515a"><code>48d28aa</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/748ce18cc2ccc3f7c07fa8b7c5b6f90ed9242b72"><code>748ce18</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/adbe6ec4cb6a617070c41927a389d0bea7b30936"><code>adbe6ec</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5278">#5278</a> from henry-hsieh/fix-nosort</li> <li><a href="https://github.com/clap-rs/clap/commit/2b48858ba84c62e9af97bee4734d70530254cd8a"><code>2b48858</code></a> fix: Skip nosort option below bash 4.4</li> <li><a href="https://github.com/clap-rs/clap/commit/777b744102cde324dc75534ef043efc15a9f40be"><code>777b744</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5277">#5277</a> from clap-rs/renovate/actions-setup-python-5.x</li> <li>Additional commits viewable in <a href="https://github.com/clap-rs/clap/compare/v4.4.12...v4.4.13">compare view</a></li> </ul> </details> <br /> Updates `syn` from 2.0.47 to 2.0.48 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/dtolnay/syn/releases">syn's releases</a>.</em></p> <blockquote> <h2>2.0.48</h2> <ul> <li>Improve error message on unexpected token after <code>else</code> (<a href="https://redirect.github.com/dtolnay/syn/issues/1578">#1578</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/dtolnay/syn/commit/5e16fc24e68b16a381cb7ef22455dba9db143083"><code>5e16fc2</code></a> Release 2.0.48</li> <li><a href="https://github.com/dtolnay/syn/commit/dc40084b15ab4a443179fc39cbadac6452408838"><code>dc40084</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/syn/issues/1578">#1578</a> from dtolnay/elseblock</li> <li><a href="https://github.com/dtolnay/syn/commit/82fcefce69d36e78301936c5af91f005d6a24357"><code>82fcefc</code></a> Fix error message on unexpected token after 'else'</li> <li><a href="https://github.com/dtolnay/syn/commit/e8a5c68ad45194e575a923f6b1e08f1817196331"><code>e8a5c68</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/syn/issues/1576">#1576</a> from dtolnay/exhaustive</li> <li><a href="https://github.com/dtolnay/syn/commit/97b1df6d935cb4801f4090782304577c8574d024"><code>97b1df6</code></a> Pick up changes to non_exhaustive_omitted_patterns lint</li> <li>See full diff in <a href="https://github.com/dtolnay/syn/compare/2.0.47...2.0.48 ">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by:
dependabot[bot] <[email protected]> Co-authored-by:
dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
-
- Jan 05, 2024
-
-
Tsvetomir Dimitrov authored
Fix some issues reported by clippy
-