Skip to content
  1. Apr 24, 2024
  3. Apr 22, 2024
  5. Apr 12, 2024
    • Branislav Kontur's avatar
      Remove `xcm::v3` from `assets-common` nits (#4037) · 5601f286
      Branislav Kontur authored 
      This PR mainly removes `xcm::v3` stuff from `assets-common` to make it
more generic and facilitate the transition to newer XCM versions. Some
of the implementations here used hard-coded `xcm::v3::Location`, but now
it's up to the runtime to configure according to its needs.

Additional/consequent changes:
- `penpal` runtime uses now `xcm::latest::Location` for `pallet_assets`
as `AssetId`, because we don't care about migrations here
- it pretty much simplify xcm-emulator integration tests, where we don't
need now a lots of boilerplate conversions:
      ```
      v3::Location::try_from(...).expect("conversion works")`
      ```
- xcm-emulator tests
- split macro `impl_assets_helpers_for_parachain` to the
`impl_assets_helpers_for_parachain` and
`impl_foreign_assets_helpers_for_parachain` (avoids using hard-coded
`xcm::v3::Location`)
      5601f286
  7. Apr 04, 2024
  9. Mar 26, 2024
    • Dcompoze's avatar
      Fix spelling mistakes across the whole repository (#3808) · 002d9260
      Dcompoze authored 
      **Update:** Pushed additional changes based on the review comments.

**This pull request fixes various spelling mistakes in this
repository.**

Most of the changes are contained in the first **3** commits:

- `Fix spelling mistakes in comments and docs`

- `Fix spelling mistakes in test names`

- `Fix spelling mistakes in error messages, panic messages, logs and
tracing`

Other source code spelling mistakes are separated into individual
commits for easier reviewing:

- `Fix the spelling of 'authority'`

- `Fix the spelling of 'REASONABLE_HEADERS_IN_JUSTIFICATION_ANCESTRY'`

- `Fix the spelling of 'prev_enqueud_messages'`

- `Fix the spelling of 'endpoint'`

- `Fix the spelling of 'children'`

- `Fix the spelling of 'PenpalSiblingSovereignAccount'`

- `Fix the spelling of 'PenpalSudoAccount'`

- `Fix the spelling of 'insufficient'`

- `Fix the spelling of 'PalletXcmExtrinsicsBenchmark'`

- `Fix the spelling of 'subtracted'`

- `Fix the spelling of 'CandidatePendingAvailability'`

- `Fix the spelling of 'exclusive'`

- `Fix the spelling of 'until'`

- `Fix the spelling of 'discriminator'`

- `Fix the spelling of 'nonexistent'`

- `Fix the spelling of 'subsystem'`

- `Fix the spelling of 'indices'`

- `Fix the spelling of 'committed'`

- `Fix the spelling of 'topology'`

- `Fix the spelling of 'response'`

- `Fix the spelling of 'beneficiary'`

- `Fix the spelling of 'formatted'`

- `Fix the spelling of 'UNKNOWN_PROOF_REQUEST'`

- `Fix the spelling of 'succeeded'`

- `Fix the spelling of 'reopened'`

- `Fix the spelling of 'proposer'`

- `Fix the spelling of 'InstantiationNonce'`

- `Fix the spelling of 'depositor'`

- `Fix the spelling of 'expiration'`

- `Fix the spelling of 'phantom'`

- `Fix the spelling of 'AggregatedKeyValue'`

- `Fix the spelling of 'randomness'`

- `Fix the spelling of 'defendant'`

- `Fix the spelling of 'AquaticMammal'`

- `Fix the spelling of 'transactions'`

- `Fix the spelling of 'PassingTracingSubscriber'`

- `Fix the spelling of 'TxSignaturePayload'`

- `Fix the spelling of 'versioning'`

- `Fix the spelling of 'descendant'`

- `Fix the spelling of 'overridden'`

- `Fix the spelling of 'network'`

Let me know if this structure is adequate.

**Note:** The usage of the words `Merkle`, `Merkelize`, `Merklization`,
`Merkelization`, `Merkleization`, is somewhat inconsistent but I left it
as it is.

~~**Note:** In some places the term `Receival` is used to refer to
message reception, IMO `Reception` is the correct word here, but I left
it as it is.~~

~~**Note:** In some places the term `Overlayed` is used instead of the
more acceptable version `Overlaid` but I also left it as it is.~~

~~**Note:** In some places the term `Applyable` is used instead of the
correct version `Applicable` but I also left it as it is.~~

**Note:** Some usage of British vs American english e.g. `judgement` vs
`judgment`, `initialise` vs `initialize`, `optimise` vs `optimize` etc.
are both present in different places, but I suppose that's
understandable given the number of contributors.

~~**Note:** There is a spelling mistake in `.github/CODEOWNERS` but it
triggers errors in CI when I make changes to it, so I left it as it
is.~~
      002d9260
  11. Mar 19, 2024
    • Juan Ignacio Rios's avatar
      Add HRMP notification handlers to the xcm-executor (#3696) · 8b3bf39a
      Juan Ignacio Rios authored 
      Currently the xcm-executor returns an `Unimplemented` error if it
receives any HRMP-related instruction.
What I propose here, which is what we are currently doing in our forked
executor at polimec, is to introduce a trait implemented by the executor
which will handle those instructions.

This way, if parachains want to keep the default behavior, they just use
`()` and it will return unimplemented, but they can also implement their
own logic to establish HRMP channels with other chains in an automated
fashion, without requiring to go through governance.

Our implementation is mentioned in the [polkadot HRMP
docs](https://arc.net/l/quote/hduiivbu

), and it was suggested to us to
submit a PR to add these changes to polkadot-sdk.

---------

Co-authored-by: default avatarBranislav Kontur <[email protected]>
Co-authored-by: command-bot <>
      8b3bf39a
  13. Feb 13, 2024
  15. Jan 31, 2024
  17. Jan 24, 2024
  19. Jan 23, 2024
    • Niklas Adolfsson's avatar
      rpc: backpressured RPC server (bump jsonrpsee 0.20) (#1313) · e16ef086
      Niklas Adolfsson authored 
      This is a rather big change in jsonrpsee, the major things in this bump
are:
- Server backpressure (the subscription impls are modified to deal with
that)
- Allow custom error types / return types (remove jsonrpsee::core::Error
and jsonrpee::core::CallError)
- Bug fixes (graceful shutdown in particular not used by substrate
anyway)
   - Less dependencies for the clients in particular
   - Return type requires Clone in method call responses
   - Moved to tokio channels
   - Async subscription API (not used in this PR)

Major changes in this PR:
- The subscriptions are now bounded and if subscription can't keep up
with the server it is dropped
- CLI: add parameter to configure the jsonrpc server bounded message
buffer (default is 64)
- Add our own subscription helper to deal with the unbounded streams in
substrate

The most important things in this PR to review is the added helpers
functions in `substrate/client/rpc/src/utils.rs` and the rest is pretty
much chore.

Regarding the "bounded buffer limit" it may cause the server to handle
the JSON-RPC calls
slower than before.

The message size limit is bounded by "--rpc-response-size" thus "by
default 10MB * 64 = 640MB"
but the subscription message size is not covered by this limit and could
be capped as well.

Hopefully the last release prior to 1.0, sorry in advance for a big PR

Previous attempt: https://github.com/paritytech/substrate/pull/13992

Resolves https://github.com/paritytech/polkadot-sdk/issues/748, resolves
https://github.com/paritytech/polkadot-sdk/issues/627
      e16ef086
  21. Jan 19, 2024
    • Sergej Sakac's avatar
      Enable cross-chain NFT transfers on asset-hub (#2796) · 50a2e28b
      Sergej Sakac authored 
      

This PR introduces the following changes:

- [x] Adds a `UniquesTransactor` to asset-hub-rococo
- [x] Adds a `UniquesTransactor` to asset-hub-westend

We can't add a transactor for `pallet-nfts` like we do for
`pallet-uniques` because `pallet-nfts` uses `nonfungibles_v2::Mutate`
instead of `nonfungibles::Mutate`, and making that work would be out of
scope of this PR.

With these modifications, reserve-based NFT cross-chain transfers can be
performed on asset-hub.

---------

Co-authored-by: default avatarjoe petrowski <[email protected]>
      50a2e28b
  23. Jan 18, 2024
  25. Jan 16, 2024
    • Francisco Aguirre's avatar
      XCMv4 (#1230) · 8428f678
      Francisco Aguirre authored 
      

# Note for reviewer

Most changes are just syntax changes necessary for the new version.
Most important files should be the ones under the `xcm` folder.

# Description 

Added XCMv4.

## Removed `Multi` prefix
The following types have been renamed:
- MultiLocation -> Location
- MultiAsset -> Asset
- MultiAssets -> Assets
- InteriorMultiLocation -> InteriorLocation
- MultiAssetFilter -> AssetFilter
- VersionedMultiAsset -> VersionedAsset
- WildMultiAsset -> WildAsset
- VersionedMultiLocation -> VersionedLocation

In order to fix a name conflict, the `Assets` in `xcm-executor` were
renamed to `HoldingAssets`, as they represent assets in holding.

## Removed `Abstract` asset id

It was not being used anywhere and this simplifies the code.

Now assets are just constructed as follows:

```rust
let asset: Asset = (AssetId(Location::new(1, Here)), 100u128).into();
```

No need for specifying `Concrete` anymore.

## Outcome is now a named fields struct

Instead of

```rust
pub enum Outcome {
  Complete(Weight),
  Incomplete(Weight, Error),
  Error(Error),
}
```

we now have

```rust
pub enum Outcome {
  Complete { used: Weight },
  Incomplete { used: Weight, error: Error },
  Error { error: Error },
}
```

## Added Reanchorable trait

Now both locations and assets implement this trait, making it easier to
reanchor both.

## New syntax for building locations and junctions

Now junctions are built using the following methods:

```rust
let location = Location {
    parents: 1,
    interior: [Parachain(1000), PalletInstance(50), GeneralIndex(1984)].into()
};
```

or

```rust
let location = Location::new(1, [Parachain(1000), PalletInstance(50), GeneralIndex(1984)]);
```

And they are matched like so:

```rust
match location.unpack() {
  (1, [Parachain(id)]) => ...
  (0, Here) => ...,
  (1, [_]) => ...,
}
```

This syntax is mandatory in v4, and has been also implemented for v2 and
v3 for easier migration.

This was needed to make all sizes smaller.

# TODO
- [x] Scaffold v4
- [x] Port github.com/paritytech/polkadot/pull/7236
- [x] Remove `Multi` prefix
- [x] Remove `Abstract` asset id

---------

Co-authored-by: command-bot <>
Co-authored-by: default avatarKeith Yeung <[email protected]>
      8428f678
    • Muharem Ismailov's avatar
      XCM WeightTrader: Swap Fee Asset for Native Asset (#1845) · 2cb39f8d
      Muharem Ismailov authored 
      Implements an XCM executor `WeightTrader`, facilitating fee payments in
any asset that can be exchanged for a native asset.

A few constraints need to be observed:
- `buy_weight` and `refund` operations must be atomic, as another weight
trader implementation might be attempted in case of failure.
- swap credit must be utilized since there isn’t an account to which an
asset of some class can be deposited with a guarantee to meet the
existential deposit requirement. Also, operating with credits enhances
the efficiency of the weight trader -
https://github.com/paritytech/polkadot-sdk/pull/1677

related PRs:
- (depends) https://github.com/paritytech/polkadot-sdk/pull/2031
- (depends) https://github.com/paritytech/polkadot-sdk/pull/1677
- (caused) https://github.com/paritytech/polkadot-sdk/pull/1847
- (caused) https://github.com/paritytech/polkadot-sdk/pull/1876

// DONE: impl `OnUnbalanced` for a `fungible/s` credit
// DONE: make the trader free from a concept of a native currency and
drop few fallible conversions. related issue -
https://github.com/paritytech/polkadot-sdk/issues/1842


// DONE: tests

---------

Co-authored-by: default avatarjoe petrowski <[email protected]>
Co-authored-by: default avatarLiam Aharon <[email protected]>
      2cb39f8d
  27. Dec 22, 2023
  29. Dec 20, 2023
  31. Dec 19, 2023
  33. Dec 14, 2023
    • Francisco Aguirre's avatar
      Add FungibleAdapter (#2684) · 10a91f82
      Francisco Aguirre authored 
      In the move from the old `Currency` traits to the new `fungible/s`
family of traits, we already had the `FungiblesAdapter` and
`NonFungiblesAdapter` for multiple fungible and non fungible assets
respectively. However, for handling only one fungible asset, we were
missing a `FungibleAdapter`, and so used the old `CurrencyAdapter`
instead. This PR aims to fill in that gap, and provide the new adapter
for more updated examples.

I marked the old `CurrencyAdapter` as deprecated as part of this PR, and
I'll change it to the new `FungibleAdapter` in a following PR.
The two stages are separated so as to not bloat this PR with some name
fixes in tests.

---------

Co-authored-by: command-bot <>
      10a91f82
  35. Dec 08, 2023
    • Muharem Ismailov's avatar
      Westend: Fellowship Treasury (#2532) · da40d97a
      Muharem Ismailov authored 
      

Treasury Pallet Instance for the Fellowship in Westend Collectives.

In this update, we present a Treasury Pallet Instance that is under the
control of the Fellowship body, with oversight from the Root and
Treasurer origins. Here's how it is governed:
- the Root origin have the authority to reject or approve spend
proposals, with no amount limit for approvals.
- the Treasurer origin have the authority to reject or approve spend
proposals, with approval limits of up to 10,000,000 DOT.
- Voice of all Fellows ranked at 3 or above can reject or approve spend
proposals, with a maximum approval limit of 10,000 DOT.
- Voice of Fellows ranked at 4 or above can also reject or approve spend
proposals, with a maximum approval limit of 10,000,000 DOT.

Additionally, we introduce the Asset Rate Pallet Instance to establish
conversion rates from asset A to B. This is used to determine if a
proposed spend amount involving a non-native asset is permissible by the
commanding origin. The rates can be set up by the Root, Treasurer
origins, or Voice of all Fellows.

---------

Co-authored-by: default avatarjoe petrowski <[email protected]>
Co-authored-by: default avatarjoepetrowski <[email protected]>
      da40d97a
  37. Dec 06, 2023
  39. Nov 17, 2023
  41. Nov 13, 2023
    • Adrian Catangiu's avatar
      pallet-xcm: enhance `reserve_transfer_assets` to support remote reserves (#1672) · 18257373
      Adrian Catangiu authored 
      ## Motivation

`pallet-xcm` is the main user-facing interface for XCM functionality,
including assets manipulation functions like `teleportAssets()` and
`reserve_transfer_assets()` calls.

While `teleportAsset()` works both ways, `reserve_transfer_assets()`
works only for sending reserve-based assets to a remote destination and
beneficiary when the reserve is the _local chain_.

## Solution

This PR enhances `pallet_xcm::(limited_)reserve_withdraw_assets` to
support transfers when reserves are other chains.
This will allow complete, **bi-directional** reserve-based asset
transfers user stories using `pallet-xcm`.

Enables following scenarios:
- transferring assets with local reserve (was previously supported iff
asset used as fee also had local reserve - now it works in all cases),
- transferring assets with reserve on destination,
- transferring assets with reserve on remote/third-party chain (iff
assets and fees have same remote reserve),
- transferring assets with reserve different than the reserve of the
asset to be used as fees - meaning can be used to transfer random asset
with local/dest reserve while using DOT for fees on all involved chains,
even if DOT local/dest reserve doesn't match asset reserve,
- transferring assets with any type of local/dest reserve while using
fees which can be teleported between involved chains.

All of the above is done by pallet inner logic without the user having
to specify which scenario/reserves/teleports/etc. The correct scenario
and corresponding XCM programs are identified, and respectively, built
automatically based on runtime configuration of trusted teleporters and
trusted reserves.

#### Current limitations:
- while `fees` and "non-fee" `assets` CAN have different reserves (or
fees CAN be teleported), the remaining "non-fee" `assets` CANNOT, among
themselves, have different reserve locations (this is also implicitly
enforced by `MAX_ASSETS_FOR_TRANSFER=2`, but this can be safely
increased in the future).
- `fees` and "non-fee" `assets` CANNOT have **different remote**
reserves (this could also be supported in the future, but adds even more
complexity while possibly not being worth it - we'll see what the future
holds).

Fixes https://github.com/paritytech/polkadot-sdk/issues/1584
Fixes https://github.com/paritytech/polkadot-sdk/issues/2055



---------

Co-authored-by: default avatarFrancisco Aguirre <[email protected]>
Co-authored-by: default avatarBranislav Kontur <[email protected]>
      18257373
  43. Nov 03, 2023
    • Svyatoslav Nikolsky's avatar
      [testnet] Allow governance to control fees for Rococo <> Westend bridge (#2139) · 0d3c67d9
      Svyatoslav Nikolsky authored 
      Right now governance could only control byte-fee component of Rococo <>
Westend message fees (paid at Asset Hubs). This PR changes it a bit:
1) governance now allowed to control both fee components - byte fee and
base fee;
2) base fee now includes cost of "default" delivery and confirmation
transactions, in addition to `ExportMessage` instruction cost.
      0d3c67d9
  45. Nov 02, 2023
    • Oliver Tale-Yazdi's avatar
      Use `Message Queue` as DMP and XCMP dispatch queue (#1246) · e1c033eb
      Oliver Tale-Yazdi authored 
      (imported from https://github.com/paritytech/cumulus/pull/2157)

## Changes

This MR refactores the XCMP, Parachains System and DMP pallets to use
the [MessageQueue](https://github.com/paritytech/substrate/pull/12485)
for delayed execution of incoming messages. The DMP pallet is entirely
replaced by the MQ and thereby removed. This allows for PoV-bounded
execution and resolves a number of issues that stem from the current
work-around.

All System Parachains adopt this change.  
The most important changes are in `primitives/core/src/lib.rs`,
`parachains/common/src/process_xcm_message.rs`,
`pallets/parachain-system/src/lib.rs`, `pallets/xcmp-queue/src/lib.rs`
and the runtime configs.

### DMP Queue Pallet

The pallet got removed and its logic refactored into parachain-system.
Overweight message management can be done directly through the MQ
pallet.

Final undeployment migrations are provided by
`cumulus_pallet_dmp_queue::UndeployDmpQueue` and `DeleteDmpQueue` that
can be configured with an aux config trait like:

```rust
parameter_types! {
	pub const DmpQueuePalletName: &'static str = \"DmpQueue\" < CHANGE ME;
	pub const RelayOrigin: AggregateMessageOrigin = AggregateMessageOrigin::Parent;
}

impl cumulus_pallet_dmp_queue::MigrationConfig for Runtime {
	type PalletName = DmpQueuePalletName;
	type DmpHandler = frame_support::traits::EnqueueWithOrigin<MessageQueue, RelayOrigin>;
	type DbWeight = <Runtime as frame_system::Config>::DbWeight;
}

// And adding them to your Migrations tuple:
pub type Migrations = (
	...
	cumulus_pallet_dmp_queue::UndeployDmpQueue<Runtime>,
	cumulus_pallet_dmp_queue::DeleteDmpQueue<Runtime>,
);
```

### XCMP Queue pallet

Removed all dispatch queue functionality. Incoming XCMP messages are now
either: Immediately handled if they are Signals, enqueued into the MQ
pallet otherwise.

New config items for the XCMP queue pallet:
```rust
/// The actual queue implementation that retains the messages for later processing.
type XcmpQueue: EnqueueMessage<ParaId>;

/// How a XCM over HRMP from a sibling parachain should be processed.
type XcmpProcessor: ProcessMessage<Origin = ParaId>;

/// The maximal number of suspended XCMP channels at the same time.
#[pallet::constant]
type MaxInboundSuspended: Get<u32>;
```

How to configure those:

```rust
// Use the MessageQueue pallet to store messages for later processing. The `TransformOrigin` is needed since
// the MQ pallet itself operators on `AggregateMessageOrigin` but we want to enqueue `ParaId`s.
type XcmpQueue = TransformOrigin<MessageQueue, AggregateMessageOrigin, ParaId, ParaIdToSibling>;

// Process XCMP messages from siblings. This is type-safe to only accept `ParaId`s. They will be dispatched
// with origin `Junction::Sibling(…)`.
type XcmpProcessor = ProcessFromSibling<
	ProcessXcmMessage<
		AggregateMessageOrigin,
		xcm_executor::XcmExecutor<xcm_config::XcmConfig>,
		RuntimeCall,
	>,
>;

// Not really important what to choose here. Just something larger than the maximal number of channels.
type MaxInboundSuspended = sp_core::ConstU32<1_000>;
```

The `InboundXcmpStatus` storage item was replaced by
`InboundXcmpSuspended` since it now only tracks inbound queue suspension
and no message indices anymore.

Now only sends the most recent channel `Signals`, as all prio ones are
out-dated anyway.

### Parachain System pallet

For `DMP` messages instead of forwarding them to the `DMP` pallet, it
now pushes them to the configured `DmpQueue`. The message processing
which was triggered in `set_validation_data` is now being done by the MQ
pallet `on_initialize`.

XCMP messages are still handed off to the `XcmpMessageHandler`
(XCMP-Queue pallet) - no change here.

New config items for the parachain system pallet:
```rust
/// Queues inbound downward messages for delayed processing. 
///
/// Analogous to the `XcmpQueue` of the XCMP queue pallet.
type DmpQueue: EnqueueMessage<AggregateMessageOrigin>;
``` 

How to configure:
```rust
/// Use the MQ pallet to store DMP messages for delayed processing.
type DmpQueue = MessageQueue;
``` 

## Message Flow

The flow of messages on the parachain side. Messages come in from the
left via the `Validation Data` and finally end up at the `Xcm Executor`
on the right.

![Untitled
(1)](https://github.com/paritytech/cumulus/assets/10380170/6cf8b377-88c9-4aed-96df-baace266e04d)

## Further changes

- Bumped the default suspension, drop and resume thresholds in
`QueueConfigData::default()`.
- `XcmpQueue::{suspend_xcm_execution, resume_xcm_execution}` errors when
they would be a noop.
- Properly validate the `QueueConfigData` before setting it.
- Marked weight files as auto-generated so they wont auto-expand in the
MR files view.
- Move the `hypothetical` asserts to `frame_support` under the name
`experimental_hypothetically`

Questions:
- [ ] What about the ugly `#[cfg(feature = \"runtime-benchmarks\")]` in
the runtimes? Not sure how to best fix. Just having them like this makes
tests fail that rely on the real message processor when the feature is
enabled.
- [ ] Need a good weight for `MessageQueueServiceWeight`. The scheduler
already takes 80% so I put it to 10% but that is quite low.

TODO:
- [x] Remove c&p code after
https://github.com/paritytech/polkadot/pull/6271
- [x] Use `HandleMessage` once it is public in Substrate
- [x] fix `runtime-benchmarks` feature
https://github.com/paritytech/polkadot/pull/6966


- [x] Benchmarks
- [x] Tests
- [ ] Migrate `InboundXcmpStatus` to `InboundXcmpSuspended`
- [x] Possibly cleanup Migrations (DMP+XCMP)
- [x] optional: create `TransformProcessMessageOrigin` in Substrate and
replace `ProcessFromSibling`
- [ ] Rerun weights on ref HW

---------

Signed-off-by: default avatarOliver Tale-Yazdi <[email protected]>
Co-authored-by: default avatarLiam Aharon <[email protected]>
Co-authored-by: default avatarjoe petrowski <[email protected]>
Co-authored-by: default avatarKian Paimani <[email protected]>
Co-authored-by: command-bot <>
      e1c033eb
  47. Nov 01, 2023
  49. Oct 25, 2023
    • Branislav Kontur's avatar
      [testnet] Align testnet system parachain runtimes using... · f6560c2b
      Branislav Kontur authored 
      [testnet] Align testnet system parachain runtimes using `RelayTreasuryLocation` and `SystemParachains` in the same way (#2023)

This PR addresses several issues:
- simplify referencing `RelayTreasuryLocation` without needing
additional `RelayTreasury` struct
- fix for referencing `SystemParachains` from parachain with `parents:
1` instead of `parents: 0`
- removed hard-coded constants and fix tests for `asset-hub-rococo`
which was merged to master after
https://github.com/paritytech/polkadot-sdk/pull/1726

---------

Co-authored-by: command-bot <>
      f6560c2b
  51. Oct 23, 2023
  53. Oct 18, 2023
    • Keith Yeung's avatar
      Introduce XcmFeesToAccount fee manager (#1234) · 3dece311
      Keith Yeung authored 
      

Combination of paritytech/polkadot#7005, its addon PR
paritytech/polkadot#7585 and its companion paritytech/cumulus#2433.

This PR introduces a new XcmFeesToAccount struct which implements the
`FeeManager` trait, and assigns this struct as the `FeeManager` in the
XCM config for all runtimes.

The struct simply deposits all fees handled by the XCM executor to a
specified account. In all runtimes, the specified account is configured
as the treasury account.

XCM __delivery__ fees are now being introduced (unless the root origin
is sending a message to a system parachain on behalf of the originating
chain).

# Note for reviewers

Most file changes are tests that had to be modified to account for the
new fees.
Main changes are in:
- cumulus/pallets/xcmp-queue/src/lib.rs <- To make it track the delivery
fees exponential factor
- polkadot/xcm/xcm-builder/src/fee_handling.rs <- Added. Has the
FeeManager implementation
- All runtime xcm_config files <- To add the FeeManager to the XCM
configuration

# Important note

After this change, instructions that create and send a new XCM (Query*,
Report*, ExportMessage, InitiateReserveWithdraw, InitiateTeleport,
DepositReserveAsset, TransferReserveAsset, LockAsset and RequestUnlock)
will require the corresponding origin account in the origin register to
pay for transport delivery fees, and the onward message will fail to be
sent if the origin account does not have the required amount. This
delivery fee is on top of what we already collect as tx fees in
pallet-xcm and XCM BuyExecution fees!

Wallet UIs that want to expose the new delivery fee can do so using the
formula:

```
delivery_fee_factor * (base_fee + encoded_msg_len * per_byte_fee)
```

where the delivery fee factor can be obtained from the corresponding
pallet based on which transport you are using (UMP, HRMP or bridges),
the base fee is a constant, the encoded message length from the message
itself and the per byte fee is the same as the configured per byte fee
for txs (i.e. `TransactionByteFee`).

---------

Co-authored-by: default avatarBranislav Kontur <[email protected]>
Co-authored-by: default avatarjoe petrowski <[email protected]>
Co-authored-by: default avatarGiles Cope <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: default avatarFrancisco Aguirre <[email protected]>
Co-authored-by: default avatarLiam Aharon <[email protected]>
Co-authored-by: default avatarKian Paimani <[email protected]>
      3dece311
    • Adrian Catangiu's avatar
      cumulus: add asset-hub-rococo runtime based on asset-hub-kusama and add... · 8b3905d2
      Adrian Catangiu authored 
      
cumulus: add asset-hub-rococo runtime based on asset-hub-kusama and add asset-bridging support to it (#1215)

This commit adds Rococo Asset Hub dedicated runtime so we can test new
features here, before merging them in Kusama Asset Hub.
Also adds one such feature: asset transfer over bridge (Rococo AssetHub
<> Wococo AssetHub)

- clone `asset-hub-kusama-runtime` -> `asset-hub-rococo-runtime`
- make it use Rococo primitives, names, assets, constants, etc
- add asset-transfer-over-bridge support to Rococo AssetHub <> Wococo
AssetHub

Fixes #1128

---------

Co-authored-by: default avatarBranislav Kontur <[email protected]>
Co-authored-by: default avatarjoe petrowski <[email protected]>
Co-authored-by: default avatarFrancisco Aguirre <[email protected]>
      8b3905d2
  55. Oct 17, 2023
  57. Oct 16, 2023
  59. Oct 07, 2023
    • Muharem Ismailov's avatar
      Treasury spends various asset kinds (#1333) · cb944dc5
      Muharem Ismailov authored 
      

### Summary 

This PR introduces new dispatchables to the treasury pallet, allowing
spends of various asset types. The enhanced features of the treasury
pallet, in conjunction with the asset-rate pallet, are set up and
enabled for Westend and Rococo.

### Westend and Rococo runtimes.

Polkadot/Kusams/Rococo Treasury can accept proposals for `spends` of
various asset kinds by specifying the asset's location and ID.

#### Treasury Instance New Dispatchables:
- `spend(AssetKind, AssetBalance, Beneficiary, Option<ValidFrom>)` -
propose and approve a spend;
- `payout(SpendIndex)` - payout an approved spend or retry a failed
payout
- `check_payment(SpendIndex)` - check the status of a payout;
- `void_spend(SpendIndex)` - void previously approved spend;
> existing spend dispatchable renamed to spend_local

in this context, the `AssetKind` parameter contains the asset's location
and it's corresponding `asset_id`, for example:
`USDT` on `AssetHub`,
``` rust
location = MultiLocation(0, X1(Parachain(1000)))
asset_id = MultiLocation(0, X2(PalletInstance(50), GeneralIndex(1984)))
```

the `Beneficiary` parameter is a `MultiLocation` in the context of the
asset's location, for example
``` rust
// the Fellowship salary pallet's location / account
FellowshipSalaryPallet = MultiLocation(1, X2(Parachain(1001), PalletInstance(64)))
// or custom `AccountId`
Alice = MultiLocation(0, AccountId32(network: None, id: [1,...]))
```

the `AssetBalance` represents the amount of the `AssetKind` to be
transferred to the `Beneficiary`. For permission checks, the asset
amount is converted to the native amount and compared against the
maximum spendable amount determined by the commanding spend origin.

the `spend` dispatchable allows for batching spends with different
`ValidFrom` arguments, enabling milestone-based spending. If the
expectations tied to an approved spend are not met, it is possible to
void the spend later using the `void_spend` dispatchable.

Asset Rate Pallet provides the conversion rate from the `AssetKind` to
the native balance.

#### Asset Rate Instance Dispatchables:
- `create(AssetKind, Rate)` - initialize a conversion rate to the native
balance for the given asset
- `update(AssetKind, Rate)` - update the conversion rate to the native
balance for the given asset
- `remove(AssetKind)` - remove an existing conversion rate to the native
balance for the given asset

the pallet's dispatchables can be executed by the Root or Treasurer
origins.

### Treasury Pallet

Treasury Pallet can accept proposals for `spends` of various asset kinds
and pay them out through the implementation of the `Pay` trait.

New Dispatchables:
- `spend(Config::AssetKind, AssetBalance, Config::Beneficiary,
Option<ValidFrom>)` - propose and approve a spend;
- `payout(SpendIndex)` - payout an approved spend or retry a failed
payout;
- `check_payment(SpendIndex)` - check the status of a payout;
- `void_spend(SpendIndex)` - void previously approved spend;
> existing spend dispatchable renamed to spend_local

The parameters' types of the `spend` dispatchable exposed via the
pallet's `Config` and allows to propose and accept a spend of a certain
amount.

An approved spend can be claimed via the `payout` within the
`Config::SpendPeriod`. Clients provide an implementation of the `Pay`
trait which can pay an asset of the `AssetKind` to the `Beneficiary` in
`AssetBalance` units.

The implementation of the Pay trait might not have an immediate final
payment status, for example if implemented over `XCM` and the actual
transfer happens on a remote chain.

The `check_status` dispatchable can be executed to update the spend's
payment state and retry the `payout` if the payment has failed.

---------

Co-authored-by: default avatarjoe petrowski <[email protected]>
Co-authored-by: command-bot <>
      cb944dc5
  61. Aug 31, 2023
    • Bastian Köcher's avatar
      Rename `polkadot-parachain` to `polkadot-parachain-primitives` (#1334) · a33d7922
      Bastian Köcher authored 
      * Rename `polkadot-parachain` to `polkadot-parachain-primitives`

While doing this it also fixes some last `rustdoc` issues and fixes
another Cargo warning related to `pallet-paged-list`.

* Fix compilation

* ".git/.scripts/commands/fmt/fmt.sh"

* Fix XCM docs

---------

Co-authored-by: command-bot <>
      a33d7922
  63. Aug 30, 2023
  65. Aug 24, 2023
  67. Aug 19, 2023
  69. Aug 16, 2023