Part of https://github.com/paritytech/polkadot-sdk/issues/4126 we want
to safely increase the execute_workers_max_num gradually from chain to
chain and assess if there are any negative impacts.

This PR performs the necessary plumbing to be able to increase it based
on the chain id, it increase the number of execution workers from 2 to 4
on test network but lives kusama and polkadot unchanged until we gather
more data.

---------

Signed-off-by: Alexandru Gheorghe <[email protected]>

[litep2p](https://github.com/altonen/litep2p) is a libp2p-compatible P2P
networking library. It supports all of the features of `rust-libp2p`
that are currently being utilized by Polkadot SDK.

Compared to `rust-libp2p`, `litep2p` has a quite different architecture
which is why the new `litep2p` network backend is only able to use a
little of the existing code in `sc-network`. The design has been mainly
influenced by how we'd wish to structure our networking-related code in
Polkadot SDK: independent higher-levels protocols directly communicating
with the network over links that support bidirectional backpressure. A
good example would be `NotificationHandle`/`RequestResponseHandle`
abstractions which allow, e.g., `SyncingEngine` to directly communicate
with peers to announce/request blocks.

I've tried running `polkadot --network-backend litep2p` with a few
different peer configurations and there is a noticeable reduction in
networking CPU usage. For high load (`...

Working towards migrating the `parity-bridges-common` repo inside
`polkadot-sdk`. This PR upgrades some dependencies in order to align
them with the versions used in `parity-bridges-common`

Related to
https://github.com/paritytech/parity-bridges-common/issues/2538

Introduces `CryptoBytes` type defined as:

```rust
pub struct CryptoBytes<const N: usize, Tag = ()>(pub [u8; N], PhantomData<fn() -> Tag>);
```

The type implements a bunch of methods and traits which are typically
expected from a byte array newtype
(NOTE: some of the methods and trait implementations IMO are a bit
redundant, but I decided to maintain them all to not change too much
stuff in this PR)

It also introduces two (generic) typical consumers of `CryptoBytes`:
`PublicBytes` and `SignatureBytes`.

```rust
pub struct PublicTag;
pub PublicBytes<const N: usize, CryptoTag> = CryptoBytes<N, (PublicTag, CryptoTag)>;

pub struct SignatureTag;
pub SignatureBytes<const N: usize, CryptoTag> = CryptoBytes<N, (SignatureTag, CryptoTag)>;
```

Both of them use a tag to differentiate the two types at a higher level.
Downstream specializations will further specialize using a dedicated
crypto tag. For example in ECDSA:


```rust
pub struct EcdsaTag;

pub type Public = PublicBytes<PUBLIC_KEY_SERIALIZED_SIZE, EcdsaTag>;
pub type Signature = PublicBytes<PUBLIC_KEY_SERIALIZED_SIZE, EcdsaTag>;
```

Overall we have a cleaner and most importantly **consistent** code for
all the types involved

All these details are opaque to the end user which can use `Public` and
`Signature` for the cryptos as before

Revert "FRAME: Create `TransactionExtension` as a replacement for `SignedExtension` (#2280)" (#3665)

This PR reverts #2280 which introduced `TransactionExtension` to replace
`SignedExtension`.

As a result of the discussion
[here](https://github.com/paritytech/polkadot-sdk/pull/3623#issuecomment-1986789700),
the changes will be reverted for now with plans to reintroduce the
concept in the future.

---------

Signed-off-by: georgepisaltu <[email protected]>

Closes #2160

First part of [Extrinsic
Horizon](https://github.com/paritytech/polkadot-sdk/issues/2415)

Introduces a new trait `TransactionExtension` to replace
`SignedExtension`. Introduce the idea of transactions which obey the
runtime's extensions and have according Extension data (né Extra data)
yet do not have hard-coded signatures.

Deprecate the terminology of "Unsigned" when used for
transactions/extrinsics owing to there now being "proper" unsigned
transactions which obey the extension framework and "old-style" unsigned
which do not. Instead we have __*General*__ for the former and
__*Bare*__ for the latter. (Ultimately, the latter will be phased out as
a type of transaction, and Bare will only be used for Inherents.)

Types of extrinsic are now therefore:
- Bare (no hardcoded signature, no Extra data; used to be known as
"Unsigned")
- Bare transactions (deprecated): Gossiped, validated with
`ValidateUnsigned` (deprecated) and the `_bare_compat` bits of
`TransactionExtension` (deprecated).
  - Inherents: Not gossiped, validated with `ProvideInherent`.
- Extended (Extra data): Gossiped, validated via `TransactionExtension`.
  - Signed transactions (with a hardcoded signature).
  - General transactions (without a hardcoded signature).

`TransactionExtension` differs from `SignedExtension` because:
- A signature on the underlying transaction may validly not be present.
- It may alter the origin during validation.
- `pre_dispatch` is renamed to `prepare` and need not contain the checks
present in `validate`.
- `validate` and `prepare` is passed an `Origin` rather than a
`AccountId`.
- `validate` may pass arbitrary information into `prepare` via a new
user-specifiable type `Val`.
- `AdditionalSigned`/`additional_signed` is renamed to
`Implicit`/`implicit`. It is encoded *for the entire transaction* and
passed in to each extension as a new argument to `validate`. This
facilitates the ability of extensions to acts as underlying crypto.

There is a new `DispatchTransaction` trait which contains only default
function impls and is impl'ed for any `TransactionExtension` impler. It
provides several utility functions which reduce some of the tedium from
using `TransactionExtension` (indeed, none of its regular functions
should now need to be called directly).

Three transaction version discriminator ("versions") are now
permissible:
- 0b000000100: Bare (used to be called "Unsigned"): contains Signature
or Extra (extension data). After bare transactions are no longer
supported, this will strictly identify an Inherents only.
- 0b100000100: Old-school "Signed" Transaction: contains Signature and
Extra (extension data).
- 0b010000100: New-school "General" Transaction: contains Extra
(extension data), but no Signature.

For the New-school General Transaction, it becomes trivial for authors
to publish extensions to the mechanism for authorizing an Origin, e.g.
through new kinds of key-signing schemes, ZK proofs, pallet state,
mutations over pre-authenticated origins or any combination of the
above.

## Code Migration

### NOW: Getting it to build

Wrap your `SignedExtension`s in `AsTransactionExtension`. This should be
accompanied by renaming your aggregate type in line with the new
terminology. E.g. Before:

```rust
/// The SignedExtension to the basic transaction logic.
pub type SignedExtra = (
	/* snip */
	MySpecialSignedExtension,
);
/// Unchecked extrinsic type as expected by this runtime.
pub type UncheckedExtrinsic =
	generic::UncheckedExtrinsic<Address, RuntimeCall, Signature, SignedExtra>;
```

After:

```rust
/// The extension to the basic transaction logic.
pub type TxExtension = (
	/* snip */
	AsTransactionExtension<MySpecialSignedExtension>,
);
/// Unchecked extrinsic type as expected by this runtime.
pub type UncheckedExtrinsic =
	generic::UncheckedExtrinsic<Address, RuntimeCall, Signature, TxExtension>;
```

You'll also need to alter any transaction building logic to add a
`.into()` to make the conversion happen. E.g. Before:

```rust
fn construct_extrinsic(
		/* snip */
) -> UncheckedExtrinsic {
	let extra: SignedExtra = (
		/* snip */
		MySpecialSignedExtension::new(/* snip */),
	);
	let payload = SignedPayload::new(call.clone(), extra.clone()).unwrap();
	let signature = payload.using_encoded(|e| sender.sign(e));
	UncheckedExtrinsic::new_signed(
		/* snip */
		Signature::Sr25519(signature),
		extra,
	)
}
```

After:

```rust
fn construct_extrinsic(
		/* snip */
) -> UncheckedExtrinsic {
	let tx_ext: TxExtension = (
		/* snip */
		MySpecialSignedExtension::new(/* snip */).into(),
	);
	let payload = SignedPayload::new(call.clone(), tx_ext.clone()).unwrap();
	let signature = payload.using_encoded(|e| sender.sign(e));
	UncheckedExtrinsic::new_signed(
		/* snip */
		Signature::Sr25519(signature),
		tx_ext,
	)
}
```

### SOON: Migrating to `TransactionExtension`

Most `SignedExtension`s can be trivially converted to become a
`TransactionExtension`. There are a few things to know.

- Instead of a single trait like `SignedExtension`, you should now
implement two traits individually: `TransactionExtensionBase` and
`TransactionExtension`.
- Weights are now a thing and must be provided via the new function `fn
weight`.

#### `TransactionExtensionBase`

This trait takes care of anything which is not dependent on types
specific to your runtime, most notably `Call`.

- `AdditionalSigned`/`additional_signed` is renamed to
`Implicit`/`implicit`.
- Weight must be returned by implementing the `weight` function. If your
extension is associated with a pallet, you'll probably want to do this
via the pallet's existing benchmarking infrastructure.

#### `TransactionExtension`

Generally:
- `pre_dispatch` is now `prepare` and you *should not reexecute the
`validate` functionality in there*!
- You don't get an account ID any more; you get an origin instead. If
you need to presume an account ID, then you can use the trait function
`AsSystemOriginSigner::as_system_origin_signer`.
- You get an additional ticket, similar to `Pre`, called `Val`. This
defines data which is passed from `validate` into `prepare`. This is
important since you should not be duplicating logic from `validate` to
`prepare`, you need a way of passing your working from the former into
the latter. This is it.
- This trait takes two type parameters: `Call` and `Context`. `Call` is
the runtime call type which used to be an associated type; you can just
move it to become a type parameter for your trait impl. `Context` is not
currently used and you can safely implement over it as an unbounded
type.
- There's no `AccountId` associated type any more. Just remove it.

Regarding `validate`:
- You get three new parameters in `validate`; all can be ignored when
migrating from `SignedExtension`.
- `validate` returns a tuple on success; the second item in the tuple is
the new ticket type `Self::Val` which gets passed in to `prepare`. If
you use any information extracted during `validate` (off-chain and
on-chain, non-mutating) in `prepare` (on-chain, mutating) then you can
pass it through with this. For the tuple's last item, just return the
`origin` argument.

Regarding `prepare`:
- This is renamed from `pre_dispatch`, but there is one change:
- FUNCTIONALITY TO VALIDATE THE TRANSACTION NEED NOT BE DUPLICATED FROM
`validate`!!
- (This is different to `SignedExtension` which was required to run the
same checks in `pre_dispatch` as in `validate`.)

Regarding `post_dispatch`:
- Since there are no unsigned transactions handled by
`TransactionExtension`, `Pre` is always defined, so the first parameter
is `Self::Pre` rather than `Option<Self::Pre>`.

If you make use of `SignedExtension::validate_unsigned` or
`SignedExtension::pre_dispatch_unsigned`, then:
- Just use the regular versions of these functions instead.
- Have your logic execute in the case that the `origin` is `None`.
- Ensure your transaction creation logic creates a General Transaction
rather than a Bare Transaction; this means having to include all
`TransactionExtension`s' data.
- `ValidateUnsigned` can still be used (for now) if you need to be able
to construct transactions which contain none of the extension data,
however these will be phased out in stage 2 of the Transactions Horizon,
so you should consider moving to an extension-centric design.

## TODO

- [x] Introduce `CheckSignature` impl of `TransactionExtension` to
ensure it's possible to have crypto be done wholly in a
`TransactionExtension`.
- [x] Deprecate `SignedExtension` and move all uses in codebase to
`TransactionExtension`.
  - [x] `ChargeTransactionPayment`
  - [x] `DummyExtension`
  - [x] `ChargeAssetTxPayment` (asset-tx-payment)
  - [x] `ChargeAssetTxPayment` (asset-conversion-tx-payment)
  - [x] `CheckWeight`
  - [x] `CheckTxVersion`
  - [x] `CheckSpecVersion`
  - [x] `CheckNonce`
  - [x] `CheckNonZeroSender`
  - [x] `CheckMortality`
  - [x] `CheckGenesis`
  - [x] `CheckOnlySudoAccount`
  - [x] `WatchDummy`
  - [x] `PrevalidateAttests`
  - [x] `GenericSignedExtension`
  - [x] `SignedExtension` (chain-polkadot-bulletin)
  - [x] `RefundSignedExtensionAdapter`
- [x] Implement `fn weight` across the board.
- [ ] Go through all pre-existing extensions which assume an account
signer and explicitly handle the possibility of another kind of origin.
- [x] `CheckNonce` should probably succeed in the case of a non-account
origin.
- [x] `CheckNonZeroSender` should succeed in the case of a non-account
origin.
- [x] `ChargeTransactionPayment` and family should fail in the case of a
non-account origin.
  - [ ] 
- [x] Fix any broken tests.

---------

Signed-off-by: georgepisaltu <[email protected]>
Signed-off-by: Alexandru Vasile <[email protected]>
Signed-off-by: dependabot[bot] <[email protected]>
Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Signed-off-by: Alexandru Gheorghe <[email protected]>
Signed-off-by: Andrei Sandu <[email protected]>
Co-authored-by: Nikhil Gupta <[email protected]>
Co-authored-by: georgepisaltu <[email protected]>
Co-authored-by: Chevdor <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Maciej <[email protected]>
Co-authored-by: Javier Viola <[email protected]>
Co-authored-by: Marcin S. <[email protected]>
Co-authored-by: Tsvetomir Dimitrov <[email protected]>
Co-authored-by: Javier Bullrich <[email protected]>
Co-authored-by: Koute <[email protected]>
Co-authored-by: Adrian Catangiu <[email protected]>
Co-authored-by: Vladimir Istyufeev <[email protected]>
Co-authored-by: Ross Bulat <[email protected]>
Co-authored-by: Gonçalo Pestana <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Svyatoslav Nikolsky <[email protected]>
Co-authored-by: André Silva <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: s0me0ne-unkn0wn <[email protected]>
Co-authored-by: ordian <[email protected]>
Co-authored-by: Sebastian Kunert <[email protected]>
Co-authored-by: Aaro Altonen <[email protected]>
Co-authored-by: Dmitry Markin <[email protected]>
Co-authored-by: Alexandru Vasile <[email protected]>
Co-authored-by: Alexander Samusev <[email protected]>
Co-authored-by: Julian Eager <[email protected]>
Co-authored-by: Michal Kucharczyk <[email protected]>
Co-authored-by: Davide Galassi <[email protected]>
Co-authored-by: Dónal Murray <[email protected]>
Co-authored-by: yjh <[email protected]>
Co-authored-by: Tom Mi <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Will | Paradox | ParaNodes.io <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Joshy Orndorff <[email protected]>
Co-authored-by: Joshy Orndorff <[email protected]>
Co-authored-by: PG Herveou <[email protected]>
Co-authored-by: Alexander Theißen <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: Juan Girini <[email protected]>
Co-authored-by: bader y <[email protected]>
Co-authored-by: James Wilson <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: asynchronous rob <[email protected]>
Co-authored-by: Parth <[email protected]>
Co-authored-by: Andrew Jones <[email protected]>
Co-authored-by: Jonathan Udd <[email protected]>
Co-authored-by: Serban Iorga <[email protected]>
Co-authored-by: Egor_P <[email protected]>
Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: Evgeny Snitko <[email protected]>
Co-authored-by: Just van Stam <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: gupnik <[email protected]>
Co-authored-by: dzmitry-lahoda <[email protected]>
Co-authored-by: zhiqiangxu <[email protected]>
Co-authored-by: Nazar Mokrynskyi <[email protected]>
Co-authored-by: Anwesh <[email protected]>
Co-authored-by: cheme <[email protected]>
Co-authored-by: Sam Johnson <[email protected]>
Co-authored-by: kianenigma <[email protected]>
Co-authored-by: Jegor Sidorenko <[email protected]>
Co-authored-by: Muharem <[email protected]>
Co-authored-by: joepetrowski <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Gabriel Facco de Arruda <[email protected]>
Co-authored-by: Squirrel <[email protected]>
Co-authored-by: Andrei Sandu <[email protected]>
Co-authored-by: georgepisaltu <[email protected]>
Co-authored-by: command-bot <>

This PR removes `AssignmentProviderConfig` and uses the corresponding
ondemand parameters from `HostConfiguration` instead. Additionally
`scheduling_lookahead` and all coretime/ondemand related parameters are
extracted in a separate struct - `SchedulerParams`.

The most relevant commit from the PR is [this
one](https://github.com/paritytech/polkadot-sdk/pull/3181/commits/830bc0f5).

Fixes https://github.com/paritytech/polkadot-sdk/issues/2268

---------

Co-authored-by: command-bot <>

The `fee` should be calculated with the reanchored asset, otherwise it
could lead to a failure where the set aside fee ends up not being
enough.

@acatangiu



---------

Co-authored-by: Adrian Catangiu <[email protected]>

The rationale behind this, is that it may be useful for some users
actually disable RPC batch requests or limit them by length instead of
the total size bytes of the batch.

This PR adds two new CLI options:

```
--rpc-disable-batch-requests - disable batch requests on the server
--rpc-max-batch-request-len <LEN> - limit batches to LEN on the server.
```

Lifting some more dependencies to the workspace. Just using the
most-often updated ones for now.
It can be reproduced locally.

```sh
# First you can check if there would be semver incompatible bumps (looks good in this case):
$ zepter transpose dependency lift-to-workspace --ignore-errors syn quote thiserror "regex:^serde.*"

# Then apply the changes:
$ zepter transpose dependency lift-to-workspace --version-resolver=highest syn quote thiserror "regex:^serde.*" --fix

# And format the changes:
$ taplo format --config .config/taplo.toml
```

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

Add RPC server rate limiting which can be utilized by the CLI
`--rpc-rate-limit <calls/per minute>`

Resolves first part of
https://github.com/paritytech/polkadot-sdk/issues/3028

//cc @PierreBesson @kogeler

  you might be interested in this one

---------

Co-authored-by: James Wilson <[email protected]>
Co-authored-by: Xiliang Chen <[email protected]>

Bumps the known_good_semver group with 6 updates:

| Package | From | To |
| --- | --- | --- |
| [serde](https://github.com/serde-rs/serde) | `1.0.195` | `1.0.196` |
| [serde_json](https://github.com/serde-rs/json) | `1.0.111` | `1.0.113`
|
| [clap](https://github.com/clap-rs/clap) | `4.4.18` | `4.5.0` |
| [syn](https://github.com/dtolnay/syn) | `2.0.48` | `2.0.49` |
| [serde_yaml](https://github.com/dtolnay/serde-yaml) | `0.9.30` |
`0.9.31` |
| [serde_derive](https://github.com/serde-rs/serde) | `1.0.195` |
`1.0.196` |

Updates `serde` from 1.0.195 to 1.0.196
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/serde/releases">serde's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.196</h2>
<ul>
<li>Improve formatting of &quot;invalid type&quot; error messages
involving floats (<a
href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/serde/commit/ede9762a583c3cc3b87c10a53551828fad339525"><code>ede9762</code></a>
Release 1.0.196</li>
<li><a
href="https://github.com/serde-rs/serde/commit/d438c2d67bf30e3edab31c2272c4829c12cf4cb5"><code>d438c2d</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>
from dtolnay/decimalpoint</li>
<li><a
href="https://github.com/serde-rs/serde/commit/bef110b92a171ac568a47339f5bd97938a8c9da2"><code>bef110b</code></a>
Format Unexpected::Float with decimal point</li>
<li><a
href="https://github.com/serde-rs/serde/commit/b971ef11d1b53da7673e0c8199e87509c003c1a8"><code>b971ef1</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2681">#2681</a>
from dtolnay/workspacedeps</li>
<li><a
href="https://github.com/serde-rs/serde/commit/29d9f693996d199748136d5561a971ed68626724"><code>29d9f69</code></a>
Fix workspace.dependencies default-features future compat warning</li>
<li><a
href="https://github.com/serde-rs/serde/commit/aecb4083bde754155752f5d7d442b64eb7dc636f"><code>aecb408</code></a>
Sort workspace dependencies</li>
<li><a
href="https://github.com/serde-rs/serde/commit/1c675ab3a38e46df4e62465800970f8b20a2055d"><code>1c675ab</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2678">#2678</a>
from rodoufu/workspaceDependencies</li>
<li><a
href="https://github.com/serde-rs/serde/commit/dd619630a337139424725697ccd9a9f7596a2d3a"><code>dd61963</code></a>
Adding workspace dependencies</li>
<li><a
href="https://github.com/serde-rs/serde/commit/111803ab0768d010c606f2fc0d0add12750d5eef"><code>111803a</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2673">#2673</a>
from Sky9x/msrv-badge</li>
<li><a
href="https://github.com/serde-rs/serde/commit/0024f74f34fbbdc44a7b22457faebe36c5cbe7f8"><code>0024f74</code></a>
Use shields.io's MSRV badges</li>
<li>See full diff in <a
href="https://github.com/serde-rs/serde/compare/v1.0.195...v1.0.196">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_json` from 1.0.111 to 1.0.113
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/json/releases">serde_json's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.113</h2>
<ul>
<li>Add <code>swap_remove</code> and <code>shift_remove</code> methods
on Map (<a
href="https://redirect.github.com/serde-rs/json/issues/1109">#1109</a>)</li>
</ul>
<h2>v1.0.112</h2>
<ul>
<li>Improve formatting of &quot;invalid type&quot; error messages
involving floats (<a
href="https://redirect.github.com/serde-rs/json/issues/1107">#1107</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/json/commit/09d865b34b9701be52764dc9bf571b1a16e9d3dc"><code>09d865b</code></a>
Release 1.0.113</li>
<li><a
href="https://github.com/serde-rs/json/commit/5aeab4eaf69d7959f013f8081865c264d6c00551"><code>5aeab4e</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1109">#1109</a>
from serde-rs/remove</li>
<li><a
href="https://github.com/serde-rs/json/commit/ca3c2ca3696cab79b8b279be7569ee1647250f1e"><code>ca3c2ca</code></a>
Add swap_remove and shift_remove methods on Map</li>
<li><a
href="https://github.com/serde-rs/json/commit/7fece969e3b480ec620419d65c2aeb08776bebcb"><code>7fece96</code></a>
Release 1.0.112</li>
<li><a
href="https://github.com/serde-rs/json/commit/6a6d2bbd9e8b8bd72573b863f12a4ec991f33232"><code>6a6d2bb</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1107">#1107</a>
from serde-rs/unexpectedfloat</li>
<li><a
href="https://github.com/serde-rs/json/commit/83d7bad54ba5db3a44198d6df0ff2e81621683fa"><code>83d7bad</code></a>
Format f64 in error messages using ryu</li>
<li><a
href="https://github.com/serde-rs/json/commit/107c2d1c42817f0d71f07a4d5b0ea2f29dbce8b8"><code>107c2d1</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1106">#1106</a>
from serde-rs/invalidvalue</li>
<li><a
href="https://github.com/serde-rs/json/commit/62ca3e4c01c2e62cd5c2a32e9104f386e5ce7808"><code>62ca3e4</code></a>
Handle Unexpected::Unit in Error::invalid_value</li>
<li><a
href="https://github.com/serde-rs/json/commit/296fafb8f32e8442ef8e4d5725c15ffca726b288"><code>296fafb</code></a>
Factor out JSON-specific Display impl for serde::de::Unexpected</li>
<li><a
href="https://github.com/serde-rs/json/commit/e56cc696bd7c112e5dd4ccfa23d094c3a1c1c1ff"><code>e56cc69</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1105">#1105</a>
from keienWang/master</li>
<li>Additional commits viewable in <a
href="https://github.com/serde-rs/json/compare/v1.0.111...v1.0.113">compare
view</a></li>
</ul>
</details>
<br />

Updates `clap` from 4.4.18 to 4.5.0
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.5.0] - 2024-02-08</h2>
<h3>Compatibility</h3>
<ul>
<li>Update MSRV to 1.74</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/a751c5fe65cd33cb09e85ff3039b4fd0182cdb6e"><code>a751c5f</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/9ec6c942b81c370a8c14652e42295933244555ac"><code>9ec6c94</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/0735119775c2d27fef6b3c232cb9ef2fcbbd963f"><code>0735119</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/c4d3959506f5068f86ffb7ab34b622bd2da40dd8"><code>c4d3959</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5344">#5344</a>
from epage/encode</li>
<li><a
href="https://github.com/clap-rs/clap/commit/f750e577789e1dd34c6950d8c8fe16d1bfd1f49c"><code>f750e57</code></a>
fix(lex): Use new-ish OsStr API</li>
<li><a
href="https://github.com/clap-rs/clap/commit/1d9a554cdfddffcb92d197706b9720e2760cb443"><code>1d9a554</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5343">#5343</a>
from epage/msrv</li>
<li><a
href="https://github.com/clap-rs/clap/commit/4b45d361b1b96eb1f37b7d1db2684203ca828a94"><code>4b45d36</code></a>
chore: Update MSRV to 1.74</li>
<li><a
href="https://github.com/clap-rs/clap/commit/55b1f945157d4d0e480dea6c492e04d0b541088a"><code>55b1f94</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5342">#5342</a>
from epage/divan</li>
<li><a
href="https://github.com/clap-rs/clap/commit/ea77b98da3f321069ae136a241a2d266c2b28bd7"><code>ea77b98</code></a>
test(complete): Make it order independent</li>
<li><a
href="https://github.com/clap-rs/clap/commit/b0fea2bac60819bdb042e10c032817fded67f815"><code>b0fea2b</code></a>
test(bench): Switch to divan</li>
<li>Additional commits viewable in <a
href="https://github.com/clap-rs/clap/compare/v4.4.18...clap_complete-v4.5.0">compare
view</a></li>
</ul>
</details>
<br />

Updates `syn` from 2.0.48 to 2.0.49
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/syn/releases">syn's
releases</a>.</em></p>
<blockquote>
<h2>2.0.49</h2>
<ul>
<li>Improve error location when parsing from an empty string literal
using <code>LitStr::parse</code> (<a
href="https://redirect.github.com/dtolnay/syn/issues/1590">#1590</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/syn/commit/e64c0636042bcd8cf56f9e6c3e828a49cb434649"><code>e64c063</code></a>
Release 2.0.49</li>
<li><a
href="https://github.com/dtolnay/syn/commit/981359c5f46f25f3db42d1b341cc607f634688e7"><code>981359c</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1590">#1590</a>
from dtolnay/streof</li>
<li><a
href="https://github.com/dtolnay/syn/commit/51298d40a447b9e5b3cd8c898c2ea9d24b31cd6d"><code>51298d4</code></a>
Improve error location at eof in LitStr::parse</li>
<li><a
href="https://github.com/dtolnay/syn/commit/270c63384a9d891f65880a03a5a92f0bf4605bbf"><code>270c633</code></a>
Update test suite to nightly-2024-02-13</li>
<li><a
href="https://github.com/dtolnay/syn/commit/dc9cf16b9b0601d2d393d059c46a8f8e0220cc21"><code>dc9cf16</code></a>
Remove FilterAttrs trait when unused</li>
<li><a
href="https://github.com/dtolnay/syn/commit/7dcfac79eda716fa806d68cc0aa811f3be717dc0"><code>7dcfac7</code></a>
Ignore dead_code warning in test</li>
<li><a
href="https://github.com/dtolnay/syn/commit/98318441089f9a9bb596fc010ed14c3b593d4bda"><code>9831844</code></a>
Update signature of Emitter::emit_diagnostic in nightly-2024-02-07</li>
<li><a
href="https://github.com/dtolnay/syn/commit/9e8033f63da93dfb6a3e698449c6edff5e56727d"><code>9e8033f</code></a>
Update test suite to nightly-2024-02-07</li>
<li><a
href="https://github.com/dtolnay/syn/commit/cb3348cd94be50995054796facdfa055b6e0e9e8"><code>cb3348c</code></a>
Update test suite to nightly-2024-01-23</li>
<li><a
href="https://github.com/dtolnay/syn/commit/15b9dbcd67bc56f3da7d33bbede46f7380fc7164"><code>15b9dbc</code></a>
Update test suite to nightly-2024-01-19</li>
<li>Additional commits viewable in <a
href="https://github.com/dtolnay/syn/compare/2.0.48...2.0.49">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_yaml` from 0.9.30 to 0.9.31
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/serde-yaml/releases">serde_yaml's
releases</a>.</em></p>
<blockquote>
<h2>0.9.31</h2>
<ul>
<li>Add <code>swap_remove</code> and <code>shift_remove</code> methods
on Mapping (<a
href="https://redirect.github.com/dtolnay/serde-yaml/issues/408">#408</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/2a77483b23897115bdd69af32ae34d593268d555"><code>2a77483</code></a>
Release 0.9.31</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/d8d1a839cf42ef4627c66bebd743f5fecd24e3ed"><code>d8d1a83</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/serde-yaml/issues/408">#408</a>
from dtolnay/remove</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/f8a99a496836ccfa6c547af9136986d13011be98"><code>f8a99a4</code></a>
Add swap_remove and shift_remove methods on Mapping</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/8b26413e3307e39329dc68a96b065058aec38f9a"><code>8b26413</code></a>
Work around dead_code warning in tests</li>
<li>See full diff in <a
href="https://github.com/dtolnay/serde-yaml/compare/0.9.30...0.9.31">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_derive` from 1.0.195 to 1.0.196
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/serde/releases">serde_derive's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.196</h2>
<ul>
<li>Improve formatting of &quot;invalid type&quot; error messages
involving floats (<a
href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/serde/commit/ede9762a583c3cc3b87c10a53551828fad339525"><code>ede9762</code></a>
Release 1.0.196</li>
<li><a
href="https://github.com/serde-rs/serde/commit/d438c2d67bf30e3edab31c2272c4829c12cf4cb5"><code>d438c2d</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>
from dtolnay/decimalpoint</li>
<li><a
href="https://github.com/serde-rs/serde/commit/bef110b92a171ac568a47339f5bd97938a8c9da2"><code>bef110b</code></a>
Format Unexpected::Float with decimal point</li>
<li><a
href="https://github.com/serde-rs/serde/commit/b971ef11d1b53da7673e0c8199e87509c003c1a8"><code>b971ef1</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2681">#2681</a>
from dtolnay/workspacedeps</li>
<li><a
href="https://github.com/serde-rs/serde/commit/29d9f693996d199748136d5561a971ed68626724"><code>29d9f69</code></a>
Fix workspace.dependencies default-features future compat warning</li>
<li><a
href="https://github.com/serde-rs/serde/commit/aecb4083bde754155752f5d7d442b64eb7dc636f"><code>aecb408</code></a>
Sort workspace dependencies</li>
<li><a
href="https://github.com/serde-rs/serde/commit/1c675ab3a38e46df4e62465800970f8b20a2055d"><code>1c675ab</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2678">#2678</a>
from rodoufu/workspaceDependencies</li>
<li><a
href="https://github.com/serde-rs/serde/commit/dd619630a337139424725697ccd9a9f7596a2d3a"><code>dd61963</code></a>
Adding workspace dependencies</li>
<li><a
href="https://github.com/serde-rs/serde/commit/111803ab0768d010c606f2fc0d0add12750d5eef"><code>111803a</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2673">#2673</a>
from Sky9x/msrv-badge</li>
<li><a
href="https://github.com/serde-rs/serde/commit/0024f74f34fbbdc44a7b22457faebe36c5cbe7f8"><code>0024f74</code></a>
Use shields.io's MSRV badges</li>
<li>See full diff in <a
href="https://github.com/serde-rs/serde/compare/v1.0.195...v1.0.196">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Currently, collators and their alongside nodes spin up a full-scale
overseer running a bunch of subsystems that are not needed if the node
is not a validator. That was considered to be harmless; however, we've
got problems with unused subsystems getting stalled for a reason not
currently known, resulting in the overseer exiting and bringing down the
whole node.

This PR aims to only run needed subsystems on such nodes, replacing the
rest with `DummySubsystem`.

It also enables collator-optimized availability recovery subsystem
implementation.

Partially solves #1730.

This is a rather big change in jsonrpsee, the major things in this bump
are:
- Server backpressure (the subscription impls are modified to deal with
that)
- Allow custom error types / return types (remove jsonrpsee::core::Error
and jsonrpee::core::CallError)
- Bug fixes (graceful shutdown in particular not used by substrate
anyway)
   - Less dependencies for the clients in particular
   - Return type requires Clone in method call responses
   - Moved to tokio channels
   - Async subscription API (not used in this PR)

Major changes in this PR:
- The subscriptions are now bounded and if subscription can't keep up
with the server it is dropped
- CLI: add parameter to configure the jsonrpc server bounded message
buffer (default is 64)
- Add our own subscription helper to deal with the unbounded streams in
substrate

The most important things in this PR to review is the added helpers
functions in `substrate/client/rpc/src/utils.rs` and the rest is pretty
much chore.

Regarding the "bounded buffer limit" it may cause the server to handle
the JSON-RPC calls
slower than before.

The message size limit is bounded by "--rpc-response-size" thus "by
default 10MB * 64 = 640MB"
but the subscription message size is not covered by this limit and could
be capped as well.

Hopefully the last release prior to 1.0, sorry in advance for a big PR

Previous attempt: https://github.com/paritytech/substrate/pull/13992

Resolves https://github.com/paritytech/polkadot-sdk/issues/748, resolves
https://github.com/paritytech/polkadot-sdk/issues/627

Bumps the known_good_semver group with 4 updates:
[serde](https://github.com/serde-rs/serde),
[serde_json](https://github.com/serde-rs/json),
[clap](https://github.com/clap-rs/clap) and
[syn](https://github.com/dtolnay/syn).

Updates `serde` from 1.0.194 to 1.0.195
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/serde/releases">serde's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.195</h2>
<ul>
<li>Prevent remote definitions of tuple struct or tuple variant from
triggering dead_code warning (<a
href="https://redirect.github.com/serde-rs/serde/issues/2671">#2671</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/serde/commit/03eec42c3313b36da416be1486e9ecac345784d5"><code>03eec42</code></a>
Release 1.0.195</li>
<li><a
href="https://github.com/serde-rs/serde/commit/196f311ae2fd8ad94fe38a57830419859a4d3dbb"><code>196f311</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2671">#2671</a>
from dtolnay/deadremote</li>
<li><a
href="https://github.com/serde-rs/serde/commit/38d9e0b2091e9b6150486c2c37367819b86bcc39"><code>38d9e0b</code></a>
Revert &quot;Add FIXME to fix dead_code warning when using
serde(remote)&quot;</li>
<li><a
href="https://github.com/serde-rs/serde/commit/6502b3131697eff6420786ad71f87f29cfff3a13"><code>6502b31</code></a>
Fix new dead_code warning in tuple struct and tuple variant remote
defs</li>
<li><a
href="https://github.com/serde-rs/serde/commit/6f1a8c3115c8d2502178c25d610fbaee2e82c46b"><code>6f1a8c3</code></a>
Add FIXME to fix dead_code warning when using serde(remote)</li>
<li><a
href="https://github.com/serde-rs/serde/commit/d883c94cc9fe72d0512dc7f4def7191a401595c9"><code>d883c94</code></a>
Work around dead_code warning in tests</li>
<li><a
href="https://github.com/serde-rs/serde/commit/961fa59a7469c5b5e323b9723323df412048d60d"><code>961fa59</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2670">#2670</a>
from serde-rs/exhaustive</li>
<li><a
href="https://github.com/serde-rs/serde/commit/8bc71def551df190e6817d3311e5c76f751f53e6"><code>8bc71de</code></a>
Fill in omitted patterns for GenericArguments match</li>
<li><a
href="https://github.com/serde-rs/serde/commit/7c65a9dc0eab2d4d829b258a7b3549351bbe8dcd"><code>7c65a9d</code></a>
Pick up changes to non_exhaustive_omitted_patterns lint</li>
<li>See full diff in <a
href="https://github.com/serde-rs/serde/compare/v1.0.194...v1.0.195">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_json` from 1.0.110 to 1.0.111
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/json/releases">serde_json's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.111</h2>
<ul>
<li>Improve floating point parsing performance on loongarch64 (<a
href="https://redirect.github.com/serde-rs/json/issues/1100">#1100</a>,
thanks <a
href="https://github.com/heiher"><code>@​heiher</code></a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/json/commit/0131ac68212e8094bd14ee618587d731b4f9a68b"><code>0131ac6</code></a>
Release 1.0.111</li>
<li><a
href="https://github.com/serde-rs/json/commit/96ecfadd3f7dd6366a2d07a098e228d15df93cb4"><code>96ecfad</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1100">#1100</a>
from heiher/limb-64-la64</li>
<li><a
href="https://github.com/serde-rs/json/commit/c80dbaf8ff5902ca670e0a48bbe495065b9314f5"><code>c80dbaf</code></a>
Set limb width to 64 for loongarch64</li>
<li>See full diff in <a
href="https://github.com/serde-rs/json/compare/v1.0.110...v1.0.111">compare
view</a></li>
</ul>
</details>
<br />

Updates `clap` from 4.4.12 to 4.4.13
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/releases">clap's
releases</a>.</em></p>
<blockquote>
<h2>v4.4.13</h2>
<h2>[4.4.13] - 2024-01-04</h2>
<h3>Documentation</h3>
<ul>
<li>Fix link to structopt migration guide</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.4.13] - 2024-01-04</h2>
<h3>Documentation</h3>
<ul>
<li>Fix link to structopt migration guide</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/2ab48b295c2463ce8c141a9868095b811ccf3b99"><code>2ab48b2</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/7a06a8cd619db704c6d826bf752eae3b86ce23a8"><code>7a06a8c</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/cca190efedf40f48147a3a4a777a9cc17728abdf"><code>cca190e</code></a>
docs: Correct link to StructOpt migration guide</li>
<li><a
href="https://github.com/clap-rs/clap/commit/5c31f453c1a9f46109db8e0a47ed212748c0556c"><code>5c31f45</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5281">#5281</a>
from Manishearth/safety-docs</li>
<li><a
href="https://github.com/clap-rs/clap/commit/ddae7e6f411c4c87294212152b8d9beea16637e7"><code>ddae7e6</code></a>
Correct safety docs</li>
<li><a
href="https://github.com/clap-rs/clap/commit/48d28aa689bfd0fb44ec025244b30ba261e2515a"><code>48d28aa</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/748ce18cc2ccc3f7c07fa8b7c5b6f90ed9242b72"><code>748ce18</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/adbe6ec4cb6a617070c41927a389d0bea7b30936"><code>adbe6ec</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5278">#5278</a>
from henry-hsieh/fix-nosort</li>
<li><a
href="https://github.com/clap-rs/clap/commit/2b48858ba84c62e9af97bee4734d70530254cd8a"><code>2b48858</code></a>
fix: Skip nosort option below bash 4.4</li>
<li><a
href="https://github.com/clap-rs/clap/commit/777b744102cde324dc75534ef043efc15a9f40be"><code>777b744</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5277">#5277</a>
from clap-rs/renovate/actions-setup-python-5.x</li>
<li>Additional commits viewable in <a
href="https://github.com/clap-rs/clap/compare/v4.4.12...v4.4.13">compare
view</a></li>
</ul>
</details>
<br />

Updates `syn` from 2.0.47 to 2.0.48
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/syn/releases">syn's
releases</a>.</em></p>
<blockquote>
<h2>2.0.48</h2>
<ul>
<li>Improve error message on unexpected token after <code>else</code>
(<a
href="https://redirect.github.com/dtolnay/syn/issues/1578">#1578</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/syn/commit/5e16fc24e68b16a381cb7ef22455dba9db143083"><code>5e16fc2</code></a>
Release 2.0.48</li>
<li><a
href="https://github.com/dtolnay/syn/commit/dc40084b15ab4a443179fc39cbadac6452408838"><code>dc40084</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1578">#1578</a>
from dtolnay/elseblock</li>
<li><a
href="https://github.com/dtolnay/syn/commit/82fcefce69d36e78301936c5af91f005d6a24357"><code>82fcefc</code></a>
Fix error message on unexpected token after 'else'</li>
<li><a
href="https://github.com/dtolnay/syn/commit/e8a5c68ad45194e575a923f6b1e08f1817196331"><code>e8a5c68</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1576">#1576</a>
from dtolnay/exhaustive</li>
<li><a
href="https://github.com/dtolnay/syn/commit/97b1df6d935cb4801f4090782304577c8574d024"><code>97b1df6</code></a>
Pick up changes to non_exhaustive_omitted_patterns lint</li>
<li>See full diff in <a
href="https://github.com/dtolnay/syn/compare/2.0.47...2.0.48">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Bumps the known_good_semver group with 4 updates:
[serde](https://github.com/serde-rs/serde),
[serde_json](https://github.com/serde-rs/json),
[clap](https://github.com/clap-rs/clap) and
[serde_yaml](https://github.com/dtolnay/serde-yaml).

Updates `serde` from 1.0.193 to 1.0.194
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/serde/releases">serde's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.194</h2>
<ul>
<li>Update proc-macro2 to fix caching issue when using a rustc-wrapper
such as sccache</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/serde/commit/d2d977a6c6dcff237ae956336d18b0c900c61aad"><code>d2d977a</code></a>
Release 1.0.194</li>
<li><a
href="https://github.com/serde-rs/serde/commit/a9a6ee9d7f2e3a3306ad7c7a8f21dcf369c6acb7"><code>a9a6ee9</code></a>
Pull in proc-macro2 sccache fix</li>
<li><a
href="https://github.com/serde-rs/serde/commit/28c5d215c11b66368b725f04cb92e49e4350bcdc"><code>28c5d21</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2669">#2669</a>
from dtolnay/optionifletelse</li>
<li><a
href="https://github.com/serde-rs/serde/commit/3d6a789562579fb7ea783e0d7f35530914d8baca"><code>3d6a789</code></a>
Remove option_if_let_else clippy suppression</li>
<li><a
href="https://github.com/serde-rs/serde/commit/a0e68698e33fa928f1d9f208d68b17df9f8bb568"><code>a0e6869</code></a>
Work around doc_link_with_quotes pedantic clippy lint</li>
<li>See full diff in <a
href="https://github.com/serde-rs/serde/compare/v1.0.193...v1.0.194">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_json` from 1.0.108 to 1.0.110
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/json/releases">serde_json's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.109</h2>
<ul>
<li>Documentation improvements</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/json/commit/df5cf215b70fb6341b255e7c0a210c06f64c0669"><code>df5cf21</code></a>
Release 1.0.110</li>
<li><a
href="https://github.com/serde-rs/json/commit/c35856a93c37b48b3d6efc4fec8e05554dd3f9d5"><code>c35856a</code></a>
Pull in proc-macro2 sccache fix</li>
<li><a
href="https://github.com/serde-rs/json/commit/f88bf1fccb05aa4de129675de44eb6aaf3fec0a0"><code>f88bf1f</code></a>
Release 1.0.109</li>
<li><a
href="https://github.com/serde-rs/json/commit/bb62c73ecef901e689b0a7a67ed613a32975520c"><code>bb62c73</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1097">#1097</a>
from serde-rs/doccfg</li>
<li><a
href="https://github.com/serde-rs/json/commit/df36d109fd9f9cdd22a874c0177cafec12237f95"><code>df36d10</code></a>
Restore doc cfg on re-exports</li>
<li><a
href="https://github.com/serde-rs/json/commit/c3670913423329c166add9d85ecdfc3e3da21e7a"><code>c367091</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1095">#1095</a>
from dtolnay/hashtest</li>
<li><a
href="https://github.com/serde-rs/json/commit/b328ee7df4dd772922f084600aa7cea39218b694"><code>b328ee7</code></a>
Eliminate hash closure in favor of calling hash_one directly</li>
<li><a
href="https://github.com/serde-rs/json/commit/b9bcbad3c094042f79f1a45189ec0edbb8f9f322"><code>b9bcbad</code></a>
Use BuildHasher::hash_one</li>
<li><a
href="https://github.com/serde-rs/json/commit/7ff6c9e30c2ecc2cdcf089ed86c7ccfe7a41721c"><code>7ff6c9e</code></a>
Use random hasher state for number hashing test</li>
<li><a
href="https://github.com/serde-rs/json/commit/fe031cd1de4dde5b47e0f18934632b41bd18b48d"><code>fe031cd</code></a>
Delete trace_macros! functionality from test</li>
<li>Additional commits viewable in <a
href="https://github.com/serde-rs/json/compare/v1.0.108...v1.0.110">compare
view</a></li>
</ul>
</details>
<br />

Updates `clap` from 4.4.11 to 4.4.12
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/releases">clap's
releases</a>.</em></p>
<blockquote>
<h2>v4.4.12</h2>
<h2>[4.4.12] - 2023-12-28</h2>
<h3>Performance</h3>
<ul>
<li>Only ask <code>TypedValueParser</code> for possible values if
needed</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.4.12] - 2023-12-28</h2>
<h3>Performance</h3>
<ul>
<li>Only ask <code>TypedValueParser</code> for possible values if
needed</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/6d601e6f312857d78f47741268f1748840484d4a"><code>6d601e6</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/048e7f0fbc4f8108894e4307af768c8d332a0576"><code>048e7f0</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/53f5b820988c1c03f0d2696fc144857ad461edc1"><code>53f5b82</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5267">#5267</a>
from vermiculus/sa/avoid-pv-expansion-in-help</li>
<li><a
href="https://github.com/clap-rs/clap/commit/05cd057978db743a65fb5fde33213af752d064e7"><code>05cd057</code></a>
perf: Avoid retrieving possible_values unless used</li>
<li><a
href="https://github.com/clap-rs/clap/commit/29208083b0598ba7d1b80e79821c0ba3eb2342ce"><code>2920808</code></a>
test: Update snapshots</li>
<li><a
href="https://github.com/clap-rs/clap/commit/28763ebb6d8714f6ca588bf477729040e0e760b0"><code>28763eb</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/ace7bb5b4570b030f7c2d0fa91e0afaaac1b0030"><code>ace7bb5</code></a>
docs(complete): Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/76beca4d4d42a817bbb578f23553c64ded2aea97"><code>76beca4</code></a>
docs(complete): Polish API reference for dynamic</li>
<li><a
href="https://github.com/clap-rs/clap/commit/3630e582d3ec59912b8e9369c38687695ddb1f43"><code>3630e58</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5273">#5273</a>
from epage/docsrs</li>
<li><a
href="https://github.com/clap-rs/clap/commit/3724b9e2e4c2a2e69337b6d809949b246d3fef39"><code>3724b9e</code></a>
docs: Include more content on docs.rs</li>
<li>See full diff in <a
href="https://github.com/clap-rs/clap/compare/v4.4.11...v4.4.12">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_yaml` from 0.9.29 to 0.9.30
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/serde-yaml/releases">serde_yaml's
releases</a>.</em></p>
<blockquote>
<h2>0.9.30</h2>
<ul>
<li>Update proc-macro2 to fix caching issue when using a rustc-wrapper
such as sccache</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/09ee25156f608f95150b27edd120bd5471db3c64"><code>09ee251</code></a>
Release 0.9.30</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/caea939ece85ab54ac41de0672d683905f1e406a"><code>caea939</code></a>
Pull in proc-macro2 sccache fix</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/d255918c141fd72d01f169bb5aa0152234981699"><code>d255918</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/serde-yaml/issues/403">#403</a>
from dtolnay/optionifletelse</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/8cfeedd766f83dab24d03b9fb11b72886a247425"><code>8cfeedd</code></a>
Remove option_if_let_else clippy suppression</li>
<li>See full diff in <a
href="https://github.com/dtolnay/serde-yaml/compare/0.9.29...0.9.30">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

We currently use a bit of a hack in `.cargo/config` to make sure that
clippy isn't too annoying by specifying the list of lints.

There is now a stable way to define lints for a workspace. The only down
side is that every crate seems to have to opt into this so there's a
*few* files modified in this PR.

Dependencies:

- [x] PR that upgrades CI to use rust 1.74 is merged.

---------

Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>

Co-authored-by: Javier Viola <[email protected]>

Using taplo, fixes all our broken and inconsistent toml formatting and
adds CI to keep them tidy.

If people want we can customise the format rules as described here
https://taplo.tamasfe.dev/configuration/formatter-options.html

@ggwpez

, I suggest zepter is used only for checking features are
propagated, and leave formatting for taplo to avoid duplicate work and
conflicts.

TODO
- [x] Use `exclude = [...]` syntax in taplo file to ignore zombienet
tests instead of deleting the dir

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

This was never used and we probably don't need it anyway.

Currently the polkadot node will backoff from block authoring if
finality starts lagging. This PR disables this mechanism on production
networks (polkadot and kusama) and adds a flags to optionally force
enabling it.

This PR updates the version of `serde_json` to `1.0.108` throughout the
codebase.

This PR prepares chains specs for _native-runtime-free_  world.

This PR has following changes:
- `substrate`:
  - adds support for:
- JSON based `GenesisConfig` to `ChainSpec` allowing interaction with
runtime `GenesisBuilder` API.
- interacting with arbitrary runtime wasm blob to[
`chain-spec-builder`](https://github.com/paritytech/substrate/blob/3ef576eaeb3f42610e85daecc464961cf1295570/bin/utils/chain-spec-builder/src/lib.rs#L46)
command line util,
- removes
[`code`](https://github.com/paritytech/substrate/blob/3ef576eaeb3f42610e85daecc464961cf1295570/frame/system/src/lib.rs#L660)
from `system_pallet`
  - adds `code` to the `ChainSpec`
- deprecates
[`ChainSpec::from_genesis`](https://github.com/paritytech/substrate/blob/3ef576eaeb3f42610e85daecc464961cf1295570/client/chain-spec/src/chain_spec.rs#L263),
but also changes the signature of this method extending it with `code`
argument.
[`ChainSpec::builder()`](https://github.com/paritytech/substrate/blob/20bee680ed098be7239cf7a6b804cd4de267983e/client/chain-spec/src/chain_spec.rs#L507)
should be used instead.
- `polkadot`:
- all references to `RuntimeGenesisConfig` in `node/service` are
removed,
- all
`(kusama|polkadot|versi|rococo|wococo)_(staging|dev)_genesis_config`
functions now return the JSON patch for default runtime `GenesisConfig`,
  - `ChainSpecBuilder` is used, `ChainSpec::from_genesis` is removed,

- `cumulus`:
  - `ChainSpecBuilder` is used, `ChainSpec::from_genesis` is removed,
- _JSON_ patch configuration used instead of `RuntimeGenesisConfig
struct` in all chain specs.
  
---------

Co-authored-by: command-bot <>
Co-authored-by: Javier Viola <[email protected]>
Co-authored-by: Davide Galassi <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Kevin Krone <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

The `BlockBuilderProvider` was a trait that was defined in
`sc-block-builder`. The trait was implemented for `Client`. This
basically meant that you needed to import `sc-block-builder` any way to
have access to the block builder. So, this trait was not providing any
real value. This pull request is removing the said trait. Instead of the
trait it introduces a builder for creating a `BlockBuilder`. The builder
currently has the quite fabulous name `BlockBuilderBuilder` (I'm open to
any better name 😅

). The rest of the pull request is about
replacing the old trait with the new builder.

# Downstream code changes

If you used `new_block` or `new_block_at` before you now need to switch
it over to the new `BlockBuilderBuilder` pattern:

```rust
// `new` requires a type that implements `CallApiAt`. 
let mut block_builder = BlockBuilderBuilder::new(client)
                // Then you need to specify the hash of the parent block the block will be build on top of
		.on_parent_block(at)
                // The block builder also needs the block number of the parent block. 
                // Here it is fetched from the given `client` using the `HeaderBackend`
                // However, there also exists `with_parent_block_number` for directly passing the number
		.fetch_parent_block_number(client)
		.unwrap()
                // Enable proof recording if required. This call is optional.
		.enable_proof_recording()
                // Pass the digests. This call is optional.
                .with_inherent_digests(digests)
		.build()
		.expect("Creates new block builder");
```

---------

Co-authored-by: Sebastian Kunert <[email protected]>
Co-authored-by: command-bot <>

This pull request is removing the Kusama and Polkadot runtime crates. As
still some crates dependent on the runtime crates, this pull request is
doing some more changes.

- It removes the `hostperfcheck` CLI command. This CLI command could
compare the current node against the standard hardware by doing some
checks. Later we added the hardware benchmark feature to Substrate. This
hardware benchmark is running on every node startup and prints a warning
if the current node is too slow. This makes this CLI command a duplicate
that was also depending on the kusama runtime.

- The pull request is removing the emulated integration tests that were
requiring the Kusama or Polkadot runtime crates.

This pull request removes the Polkadot and Kusama native runtime from
the polkadot node. This brings some implications with it:

There are no more kusama/polkadot-dev chain specs available. We will
need to write some tooling in the fellowship repo to provide them
easily.

The try-runtime job for polkadot & kusama is not available anymore as we
don't have the dev chain specs anymore.

Certain benchmarking commands will also not work until we migrate them
to use a runtime api.

Some crates in utils are still depending on the polkadot/kusama native
runtime that will also need to be fixed.

Port of: https://github.com/paritytech/polkadot/pull/7467

Bumps the known_good_semver group with 2 updates:
[serde_json](https://github.com/serde-rs/json) and
[syn](https://github.com/dtolnay/syn).

Updates `serde_json` from 1.0.106 to 1.0.107
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/json/releases">serde_json's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.107</h2>
<ul>
<li>impl IntoDeserializer for &amp;RawValue (<a
href="https://redirect.github.com/serde-rs/json/issues/1071">#1071</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/json/commit/b6e113f2036c52e994ca805e530ee4ffae791f71"><code>b6e113f</code></a>
Release 1.0.107</li>
<li><a
href="https://github.com/serde-rs/json/commit/00626a0a95b3d4cee8d57709f0acc804c1296716"><code>00626a0</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1073">#1073</a>
from dtolnay/rawvalue</li>
<li><a
href="https://github.com/serde-rs/json/commit/b9d296f87d6081afdd590d5a6006737db961302b"><code>b9d296f</code></a>
IntoDeserializer for &amp;RawValue</li>
<li><a
href="https://github.com/serde-rs/json/commit/4ea34a2566ba82a2e602526d0919d23e88c9e5ef"><code>4ea34a2</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1072">#1072</a>
from dtolnay/rawvalue</li>
<li><a
href="https://github.com/serde-rs/json/commit/fe30766ae5c79bfb670b2de1c5596e6e11e22f8c"><code>fe30766</code></a>
Support deserializing from &amp;RawValue</li>
<li><a
href="https://github.com/serde-rs/json/commit/2c22077f0e2decfda5cdfd5821c5f9547d584b76"><code>2c22077</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1062">#1062</a>
from osiewicz/remove_build_rs</li>
<li><a
href="https://github.com/serde-rs/json/commit/04f7758b6eae935237574b25a1e63cf5e281e19e"><code>04f7758</code></a>
fixup! chore: Remove no_btreemap_get_key_value and
no_btreemap_remove_entry.</li>
<li><a
href="https://github.com/serde-rs/json/commit/83bdc5fd4213d94201a3d9ad0f2943da7eba1dd6"><code>83bdc5f</code></a>
Omit return keyword in <code>remove_entry</code></li>
<li><a
href="https://github.com/serde-rs/json/commit/89a274195680d3ea6a2b442ff633b81ccf60bbe4"><code>89a2741</code></a>
Revert &quot;Remove limb_width32 and limb_width64 features&quot;</li>
<li><a
href="https://github.com/serde-rs/json/commit/16e04ceeddfdfad18fb1ae8530695a318fa9bc02"><code>16e04ce</code></a>
fixup! Remove limb_width32 and limb_width64 features</li>
<li>See full diff in <a
href="https://github.com/serde-rs/json/compare/v1.0.106...v1.0.107">compare
view</a></li>
</ul>
</details>
<br />

Updates `syn` from 2.0.32 to 2.0.33
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/syn/releases">syn's
releases</a>.</em></p>
<blockquote>
<h2>2.0.33</h2>
<ul>
<li>Special handling for the <code>(/*ERROR*/)</code> placeholder that
rustc uses for macros that fail to expand</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/syn/commit/5e3f55e684b7e33424b9f551105463418b196eb4"><code>5e3f55e</code></a>
Release 2.0.33</li>
<li><a
href="https://github.com/dtolnay/syn/commit/3e04809f5218c6d5fb2b09a6c55933e785825c75"><code>3e04809</code></a>
Pull in proc-macro2 error placeholder change</li>
<li><a
href="https://github.com/dtolnay/syn/commit/2cd5608a4c37810bb0947b0c161a20695b3ce487"><code>2cd5608</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1508">#1508</a>
from dtolnay/error</li>
<li><a
href="https://github.com/dtolnay/syn/commit/84cfe09484f6468bc85fb01db11c6a10fcb2d988"><code>84cfe09</code></a>
Fall through to 'Unrecognized literal' error</li>
<li><a
href="https://github.com/dtolnay/syn/commit/a80570c81bf15c9afcf8e2470ab06f60f7a8183d"><code>a80570c</code></a>
Parse rustc's representation of macro expansion error</li>
<li>See full diff in <a
href="https://github.com/dtolnay/syn/compare/2.0.32...2.0.33">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Bumps the known_good_semver group with 2 updates: [serde_json](https://github.com/serde-rs/json) and [syn](https://github.com/dtolnay/syn).


Updates `serde_json` from 1.0.105 to 1.0.106
- [Release notes](https://github.com/serde-rs/json/releases)
- [Commits](https://github.com/serde-rs/json/compare/v1.0.105...v1.0.106)

Updates `syn` from 2.0.31 to 2.0.32
- [Release notes](https://github.com/dtolnay/syn/releases)
- [Commits](https://github.com/dtolnay/syn/compare/2.0.31...2.0.32)

---
updated-dependencies:
- dependency-name: serde_json
  dependency-type: direct:production
  update-type: version-update:semver-patch
  dependency-group: known_good_semver
- dependency-name: syn
  dependency-type: direct:production
  update-type: version-update:semver-patch
  dependency-group: known_good_semver
...

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Bumps [thiserror](https://github.com/dtolnay/thiserror) from 1.0.47 to 1.0.48.
- [Release notes](https://github.com/dtolnay/thiserror/releases)
- [Commits](https://github.com/dtolnay/thiserror/compare/1.0.47...1.0.48)

---
updated-dependencies:
- dependency-name: thiserror
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Liam Aharon <[email protected]>

* Add markdown linting

- add linter default rules
- adapt rules to current code
- fix the code for linting to pass
- add CI check

fix #1243

* Fix markdown for Substrate
* Fix tooling install
* Fix workflow
* Add documentation
* Remove trailing spaces
* Update .github/.markdownlint.yaml

Co-authored-by: Oliver Tale-Yazdi <[email protected]>
* Fix mangled markdown/lists
* Fix captalization issues on known words

* Rename `polkadot-parachain` to `polkadot-parachain-primitives`

While doing this it also fixes some last `rustdoc` issues and fixes
another Cargo warning related to `pallet-paged-list`.

* Fix compilation

* ".git/.scripts/commands/fmt/fmt.sh"

* Fix XCM docs

---------

Co-authored-by: command-bot <>

* Directly use tokio::test

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Remove old code

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Delete substrate-test-utils-test-crate

Also not needed anymore.

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

* Rename squatted crates

This commit adds the staging- prefix to squatted crates so we can go forward and publish them to crates.io.

Using the staging- prefix is a temp fix until we decide on replacement names.
https://forum.parity.io/t/renaming-squated-crates-in-substrate-polkadot-cumulus/1964/6

* Fix test after crate renames

* Update Lockfile

* Fix `test-rustdoc`

* ".git/.scripts/commands/fmt/fmt.sh"

---------

Co-authored-by: command-bot <>

* Fix build profiles

Closes https://github.com/paritytech/polkadot-sdk/issues/1155

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Manually set version to 1.0.0

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Use workspace repo

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* 'Authors and Edition from workspace

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Manually fix conflicting ?

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Remove duplicates

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Autofix feature propagation

zepter lint propagate-feature --feature try-runtime --left-side-feature-missing=ignore --workspace --fix --feature-enables-dep="try-runtime:frame-try-runtime"
zepter lint propagate-feature --feature runtime-benchmarks --left-side-feature-missing=ignore --workspace --fix --feature-enables-dep="runtime-benchmarks:frame-benchmarking"
zepter lint propagate-feature --feature std --left-side-feature-missing=ignore --workspace --fix
zepter f f

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Bump zepter

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add some duplicates

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Revert "Add some duplicates"

This reverts commit c6ce6272

.

* Remove default enabled features

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Bump Zepter

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Bump in correct location 🤦



Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* DNM: Add some mistakes

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* DNM: Add some mistakes

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Revert "DNM: Add some mistakes"

This reverts commit d469b3f0.

* Revert "DNM: Add some mistakes"

This reverts commit d892a73a

.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add CI for monorepo

* fix frame tests

* Format features

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* add note for skipping tests and disable test-linux-stable-all

* Fix tests and compile issues (#1152)

* Fix feature dependant import

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Bump test timeout

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Remove feature gate

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add resolver 2

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Remove old lockfile

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Format features

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Fix check-dependency-rules

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* rm test-runtime

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Actually fix script

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* enable cargo-check-each-crate-macos

* Run check-each-crate on 6 machines (#1163)

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

Signed-off-by: alvicsam <[email protected]>

* inclusion emulator logic for asynchronous backing (#4790)

* initial stab at candidate_context

* fmt

* docs & more TODOs

* some cleanups

* reframe as inclusion_emulator

* documentations yes

* update types

* add constraint modifications

* watermark

* produce modifications

* v2 primitives: re-export all v1 for consistency

* vstaging primitives

* emulator constraints: handle code upgrades

* produce outbound HRMP modifications

* stack.

* method for applying modifications

* method just for sanity-checking modifications

* fragments produce modifications, not prospectives

* make linear

* add some TODOs

* remove stacking; handle code upgrades

* take `fragment` private

* reintroduce stacking.

* fragment constructor

* add TODO

* allow validating fragments against future constraints

* docs

* relay-parent number and min code size checks

* check code upgrade restriction

* check max hrmp per candidate

* fmt

* remove GoAhead logic because it wasn't helpful

* docs on code upgrade failure

* test stacking

* test modifications against constraints

* fmt

* test fragments

* descending or duplicate test

* fmt

* remove unused imports in vstaging

* wrong primitives

* spellcheck

* Runtime changes for Asynchronous Backing (#4786)

* inclusion: utility for allowed relay-parents

* inclusion: use prev number instead of prev hash

* track most recent context of paras

* inclusion: accept previous relay-parents

* update dmp  advancement rule for async backing

* fmt

* add a comment about validation outputs

* clean up a couple of TODOs

* weights

* fix weights

* fmt

* Resolve dmp todo

* Restore inclusion tests

* Restore paras_inherent tests

* MostRecentContext test

* Benchmark for new paras dispatchable

* Prepare check_validation_outputs for upgrade

* cargo run --quiet --profile=production  --features=runtime-benchmarks -- benchmark --chain=kusama-dev --steps=50 --repeat=20 --pallet=runtime_parachains::paras --extrinsic=* --execution=wasm --wasm-execution=compiled --heap-pages=4096 --header=./file_header.txt --output=./runtime/kusama/src/weights/runtime_parachains_paras.rs

* cargo run --quiet --profile=production  --features=runtime-benchmarks -- benchmark --chain=westend-dev --steps=50 --repeat=20 --pallet=runtime_parachains::paras --extrinsic=* --execution=wasm --wasm-execution=compiled --heap-pages=4096 --header=./file_header.txt --output=./runtime/westend/src/weights/runtime_parachains_paras.rs

* cargo run --quiet --profile=production  --features=runtime-benchmarks -- benchmark --chain=polkadot-dev --steps=50 --repeat=20 --pallet=runtime_parachains::paras --extrinsic=* --execution=wasm --wasm-execution=compiled --heap-pages=4096 --header=./file_header.txt --output=./runtime/polkadot/src/weights/runtime_parachains_paras.rs

* cargo run --quiet --profile=production  --features=runtime-benchmarks -- benchmark --chain=rococo-dev --steps=50 --repeat=20 --pallet=runtime_parachains::paras --extrinsic=* --execution=wasm --wasm-execution=compiled --heap-pages=4096 --header=./file_header.txt --output=./runtime/rococo/src/weights/runtime_parachains_paras.rs

* Implementers guide changes

* More tests for allowed relay parents

* Add a github issue link

* Compute group index based on relay parent

* Storage migration

* Move allowed parents tracker to shared

* Compile error

* Get group assigned to core at the next block

* Test group assignment

* fmt

* Error instead of panic

* Update guide

* Extend doc-comment

* Update runtime/parachains/src/shared.rs

Co-authored-by: Robert Habermeier <[email protected]>

Co-authored-by: Chris Sosnin <[email protected]>
Co-authored-by: Parity Bot <[email protected]>
Co-authored-by: Chris Sosnin <[email protected]>

* Prospective Parachains Subsystem (#4913)

* docs and skeleton

* subsystem skeleton

* main loop

* fragment tree basics & fmt

* begin fragment trees & view

* flesh out more of view update logic

* further flesh out update logic

* some refcount functions for fragment trees

* add fatal/non-fatal errors

* use non-fatal results

* clear up some TODOs

* ideal format for scheduling info

* add a bunch of TODOs

* some more fluff

* extract fragment graph to submodule

* begin fragment graph API

* trees, not graphs

* improve docs

* scope and constructor for trees

* add some test TODOs

* limit max ancestors and store constraints

* constructor

* constraints: fix bug in HRMP watermarks

* fragment tree population logic

* set::retain

* extract population logic

* implement add_and_populate

* fmt

* add some TODOs in tests

* implement child-selection

* strip out old stuff based on wrong assumptions

* use fatality

* implement pruning

* remove unused ancestor constraints

* fragment tree instantiation

* remove outdated comment

* add message/request types and skeleton for handling

* fmt

* implement handle_candidate_seconded

* candidate storage: handle backed

* implement handle_candidate_backed

* implement answer_get_backable_candidate

* remove async where not needed

* implement fetch_ancestry

* add logic for run_iteration

* add some docs

* remove global allow(unused), fix warnings

* make spellcheck happy (despite English)

* fmt

* bump Cargo.lock

* replace tracing with gum

* introduce PopulateFrom trait

* implement GetHypotheticalDepths

* revise docs slightly

* first fragment tree scope test

* more scope tests

* test add_candidate

* fmt

* test retain

* refactor test code

* test populate is recursive

* test contiguity of depth 0 is maintained

* add_and_populate tests

* cycle tests

* remove PopulateFrom trait

* fmt

* test hypothetical depths (non-recursive)

* have CandidateSeconded return membership

* tree membership requests

* Add a ProspectiveParachainsSubsystem struct

* add a staging API for base constraints

* add a `From` impl

* add runtime API for staging_validity_constraints

* implement fetch_base_constraints

* implement `fetch_upcoming_paras`

* remove reconstruction of candidate receipt; no obvious usecase

* fmt

* export message to broader module

* remove last TODO

* correctly export

* fix compilation and add GetMinimumRelayParent request

* make provisioner into a real subsystem with proper mesage bounds

* fmt

* fix ChannelsOut in overseer test

* fix overseer tests

* fix again

* fmt

* Integrate prospective parachains subsystem into backing: Part 1 (#5557)

* BEGIN ASYNC candidate-backing CHANGES

* rename & document modes

* answer prospective validation data requests

* GetMinimumRelayParents request is now plural

* implement an implicit view utility for backing subsystems

* implicit-view: get allowed relay parents

* refactorings and improvements to implicit view

* add some TODOs for tests

* split implicit view updates into 2 functions

* backing: define State to prepare for functional refactor

* add some docs

* backing: implement bones of new leaf activation logic

* backing: create per-relay-parent-states

* use new handle_active_leaves_update

* begin extracting logic from CandidateBackingJob

* mostly extract statement import from job logic

* handle statement imports outside of job logic

* do some TODO planning for prospective parachains integration

* finish rewriting backing subsystem in functional style

* add prospective parachains mode to relay parent entries

* fmt

* add a RejectedByProspectiveParachains error

* notify prospective parachains of seconded and backed candidates

* always validate candidates exhaustively in backing.

* return persisted_validation_data from validation

* handle rejections by prospective parachains

* implement seconding sanity check

* invoke validate_and_second

* Alter statement table to allow multiple seconded messages per validator

* refactor backing to have statements carry PVD

* clean up all warnings

* Add tests for implicit view

* Improve doc comments

* Prospective parachains mode based on Runtime API version

* Add a TODO

* Rework seconding_sanity_check

* Iterate over responses

* Update backing tests

* collator-protocol: load PVD from runtime

* Fix validator side tests

* Update statement-distribution to fetch PVD

* Fix statement-distribution tests

* Backing tests with prospective paras #1

* fix per_relay_parent pruning in backing

* Test multiple leaves

* Test seconding sanity check

* Import statement order

Before creating an entry in `PerCandidateState` map
wait for the approval from the prospective parachains

* Add a test for correct state updates

* Second multiple candidates per relay parent test

* Add backing tests with prospective paras

* Second more than one test without prospective paras

* Add a test for prospective para blocks

* Update malus

* typos

Co-authored-by: Chris Sosnin <[email protected]>

* Track occupied depth in backing per parachain (#5778)

* provisioner: async backing changes (#5711)

* Provisioner changes for async backing

* Select candidates based on prospective paras mode

* Revert naming

* Update tests

* Update TODO comment

* review

* provisioner: async backing changes (#5711)

* Provisioner changes for async backing

* Select candidates based on prospective paras mode

* Revert naming

* Update tests

* Update TODO comment

* review

* fmt

* Network bridge changes for asynchronous backing + update subsystems to handle versioned packets (#5991)

* BEGIN STATEMENT DISTRIBUTION WORK

create a vstaging network protocol which is the same as v1

* mostly make network bridge amenable to vstaging

* network-bridge: fully adapt to vstaging

* add some TODOs for tests

* fix fallout in bitfield-distribution

* bitfield distribution tests + TODOs

* fix fallout in gossip-support

* collator-protocol: fix message fallout

* collator-protocol: load PVD from runtime

* add TODO for vstaging tests

* make things compile

* set used network protocol version using a feature

* fmt

* get approval-distribution building

* fix approval-distribution tests

* spellcheck

* nits

* approval distribution net protocol test

* bitfield distribution net protocol test

* Revert "collator-protocol: fix message fallout"

This reverts commit 07cc887303e16c6b3843ecb25cdc7cc2080e2ed1.

* Network bridge tests

Co-authored-by: Chris Sosnin <[email protected]>

* remove max_pov_size requirement from prospective pvd request (#6014)

* remove max_pov_size requirement from prospective pvd request

* fmt

* Extract legacy statement distribution to its own module (#6026)

* add compatibility type to v2 statement distribution message

* warning cleanup

* handle compatibility layer for v2

* clean up an unimplemented!() block

* circulate statements based on version

* extract legacy v1 code into separate module

* remove unimplemented

* clean up naming of from_requester/responder

* remove TODOs

* have backing share seconded statements with PVD

* fmt

* fix warning

* Quick fix unused warning for not yet implemented/used staging messages.

* Fix network bridge test

* Fix wrong merge.

We now have 23 subsystems (network bridge split + prospective
parachains)

Co-authored-by: Robert Klotzner <[email protected]>

* Version 3 is already live.

* Fix tests (#6055)

* Fix backing tests

* Fix warnings.

* fmt

* collator-protocol: asynchronous backing changes (#5740)

* Draft collator side changes

* Start working on collations management

* Handle peer's view change

* Versioning on advertising

* Versioned collation fetching request

* Handle versioned messages

* Improve docs for collation requests

* Add spans

* Add request receiver to overseer

* Fix collator side tests

* Extract relay parent mode to lib

* Validator side draft

* Add more checks for advertisement

* Request pvd based on async backing mode

* review

* Validator side improvements

* Make old tests green

* More fixes

* Collator side tests draft

* Send collation test

* fmt

* Collator side network protocol versioning

* cleanup

* merge artifacts

* Validator side net protocol versioning

* Remove fragment tree membership request

* Resolve todo

* Collator side core state test

* Improve net protocol compatibility

* Validator side tests

* more improvements

* style fixes

* downgrade log

* Track implicit assignments

* Limit the number of seconded candidates per para

* Add a sanity check

* Handle fetched candidate

* fix tests

* Retry fetch

* Guard against dequeueing while already fetching

* Reintegrate connection management

* Timeout on advertisements

* fmt

* spellcheck

* update tests after merge

* validator assignment fixes for backing and collator protocol (#6158)

* Rename depth->ancestry len in tests

* Refactor group assignments

* Remove implicit assignments

* backing: consider occupied core assignments

* Track a single para on validator side

* Refactor prospective parachains mode request (#6179)

* Extract prospective parachains mode into util

* Skip activations depending on the mode

* backing: don't send backed candidate to provisioner (#6185)

* backing: introduce `CanSecond` request for advertisements filtering (#6225)

* Drop BoundToRelayParent

* draft changes

* fix backing tests

* Fix genesis ancestry

* Fix validator side tests

* more tests

* cargo generate-lockfile

* Implement `StagingValidityConstraints` Runtime API method (#6258)

* Implement StagingValidityConstraints

* spellcheck

* fix ump params

* Update hrmp comment

* Introduce ump per candidate limit

* hypothetical earliest block

* refactor primitives usage

* hypothetical earliest block number test

* fix build

* Prepare the Runtime for asynchronous backing upgrade (#6287)

* Introduce async backing params to runtime config

* fix cumulus config

* use config

* finish runtimes

* Introduce new staging API

* Update collator protocol

* Update provisioner

* Update prospective parachains

* Update backing

* Move async backing params lower in the config

* make naming consistent

* misc

* Use real prospective parachains subsystem (#6407)

* Backport `HypotheticalFrontier` into the feature branch (#6605)

* implement more general HypotheticalFrontier

* fmt

* drop unneeded request

Co-authored-by: Robert Habermeier <[email protected]>

* Resolve todo about legacy leaf activation (#6447)

* fix bug/warning in handling membership answers

* Remove `HypotheticalDepthRequest` in favor of `HypotheticalFrontierRequest` (#6521)

* Remove `HypotheticalDepthRequest` for `HypotheticalFrontierRequest`

* Update tests

* Fix (removed wrong docstring)

* Fix can_second request

* Patch some dead_code errors

---------

Co-authored-by: Chris Sosnin <[email protected]>

* Async Backing: Send Statement Distribution "Backed" messages (#6634)

* Backing: Send Statement Distribution "Backed" messages

Closes #6590.

**TODO:**

- [ ] Adjust tests

* Fix compile errors

* (Mostly) fix tests

* Fix comment

* Fix test and compile error

* Test that `StatementDistributionMessage::Backed` is sent

* Fix compile error

* Fix some clippy errors

* Add prospective parachains subsystem tests (#6454)

* Add prospective parachains subsystem test

* Add `should_do_no_work_if_async_backing_disabled_for_leaf` test

* Implement `activate_leaf` helper, up to getting ancestry

* Finish implementing `activate_leaf`

* Small refactor in `activate_leaf`

* Get `CandidateSeconded` working

* Finish `send_candidate_and_check_if_found` test

* Refactor; send more leaves & candidates

* Refactor test

* Implement `check_candidate_parent_leaving_view` test

* Start work on `check_candidate_on_multiple_forks` test

* Don’t associate specific parachains with leaf

* Finish `correctly_updates_leaves` test

* Fix cycle due to reused head data

* Fix `check_backable_query` test

* Fix `check_candidate_on_multiple_forks` test

* Add `check_depth_and_pvd_queries` test

* Address review comments

* Remove TODO

* add a new index for output head data to candidate storage

* Resolve test TODOs

* Fix compile errors

* test candidate storage pruning, make sure new index is cleaned up

---------

Co-authored-by: Robert Habermeier <[email protected]>

* Node-side metrics for asynchronous backing (#6549)

* Add metrics for `prune_view_candidate_storage`

* Add metrics for `request_unblocked_collations`

* Fix docstring

* Couple fixes from review comments

* Fix `check_depth_query` test

* inclusion-emulator: mirror advancement rule check (#6361)

* inclusion-emulator: mirror advancement rule check

* fix build

* prospective-parachains: introduce `backed_in_path_only` flag for advertisements (#6649)

* Introduce `backed_in_path_only` flag for depth request

* fmt

* update doc comment

* fmt

* Add async-backing zombienet tests (#6314)

* Async backing: impl guide for statement distribution (#6738)

Co-authored-by: Bradley Olson <[email protected]>
Co-authored-by: alexgparity <[email protected]>

* Asynchronous backing statement distribution: Take III (#5999)

* add notification types for v2 statement-distribution

* improve protocol docs

* add empty vstaging module

* fmt

* add backed candidate packet request types

* start putting down structure of new logic

* handle activated leaf

* some sanity-checking on outbound statements

* fmt

* update vstaging share to use statements with PVD

* tiny refactor, candidate_hash location

* import local statements

* refactor statement import

* first stab at broadcast logic

* fmt

* fill out some TODOs

* start on handling incoming

* split off session info into separate map

* start in on a knowledge tracker

* address some grumbles

* format

* missed comment

* some docs for direct

* add note on slashing

* amend

* simplify 'direct' code

* finish up the 'direct' logic

* add a bunch of tests for the direct-in-group logic

* rename 'direct' to 'cluster', begin a candidate_entry module

* distill candidate_entry

* start in on a statement-store module

* some utilities for the statement store

* rewrite 'send_statement_direct' using new tools

* filter sending logic on peers which have the relay-parent in their view.

* some more logic for handling incoming statements

* req/res: BackedCandidatePacket -> AttestedCandidate + tweaks

* add a `validated_in_group` bitfield to BackedCandidateInventory

* BackedCandidateInventory -> Manifest

* start in on requester module

* add outgoing request for attested candidate

* add a priority mechanism for requester

* some request dispatch logic

* add seconded mask to tagged-request

* amend manifest to hold group index

* handle errors and set up scaffold for response validation

* validate attested candidate responses

* requester -> requests

* add some utilities for manipulating requests

* begin integrating requester

* start grid module

* tiny

* refactor grid topology to expose more info to subsystems

* fix grid_topology test

* fix overseer test

* implement topology group-based view construction logic

* fmt

* flesh out grid slightly more

* add indexed groups utility

* integrate Groups into per-session info

* refactor statement store to borrow Groups

* implement manifest knowledge utility

* add a test for topology setup

* don't send to group members

* test for conflicting manifests

* manifest knowledge tests

* fmt

* rename field

* garbage collection for grid tracker

* routines for finding correct/incorrect advertisers

* add manifest import logic

* tweak naming

* more tests for manifest import

* add comment

* rework candidates into a view-wide tracker

* fmt

* start writing boilerplate for grid sending

* fmt

* some more group boilerplate

* refactor handling of topology and authority IDs

* fmt

* send statements directly to grid peers where possible

* send to cluster only if statement belongs to cluster

* improve handling of cluster statements

* handle incoming statements along the grid

* API for introduction of candidates into the tree

* backing: use new prospective parachains API

* fmt prospective parachains changes

* fmt statement-dist

* fix condition

* get ready for tracking importable candidates

* prospective parachains: add Cow logic

* incomplete and complete hypothetical candidates

* remove keep_if_unneeded

* fmt

* implement more general HypotheticalFrontier

* fmt, cleanup

* add a by_parent_hash index to candidate tracker

* more framework for future code

* utilities for getting all hypothetical candidates for frontier

* track origin in statement store

* fmt

* requests should return peer

* apply post-confirmation reckoning

* flesh out import/announce/circulate logic on new statements

* adjust

* adjust TODO comment

* fix  backing tests

* update statement-distribution to use new indexedvec

* fmt

* query hypothetical candidates

* implement `note_importable_under`

* extract common utility of fragment tree updates

* add a helper function for getting statements unknown by backing

* import fresh statements to backing

* send announcements and acknowledgements over grid

* provide freshly importable statements

also avoid tracking backed candidates in statement distribution

* do not issue requests on newly importable candidates

* add TODO for later when confirming candidate

* write a routine for handling backed candidate notifications

* simplify grid substantially

* add some test TODOs

* handle confirmed candidates & grid announcements

* finish implementing manifest handling, including follow up statements

* send follow-up statements when acknowledging freshly backed

* fmt

* handle incoming acknowledgements

* a little DRYing

* wire up network messages to handlers

* fmt

* some skeleton code for peer view update handling

* more peer view skeleton stuff

* Fix async backing statement distribution tests (#6621)

* Fix compile errors in tests

* Cargo fmt

* Resolve some todos in async backing statement-distribution branch (#6482)

* Implement `remove_by_relay_parent`

* Extract `minimum_votes` to shared primitives.

* Add `can_send_statements_received_with_prejudice` test

* Fix test

* Update docstrings

* Cargo fmt

* Fix compile error

* Fix compile errors in tests

* Cargo fmt

* Add module docs; write `test_priority_ordering` (first draft)

* Fix `test_priority_ordering`

* Move `insert_or_update_priority`: `Drop` -> `set_cluster_priority`

* Address review comments

* Remove `Entry::get_mut`

* fix test compilation

* add a TODO for a test

* clean up a couple of TODOs

* implement sending pending cluster statements

* refactor utility function for sending acknowledgement and statements

* mostly implement catching peers up via grid

* Fix clippy error

* alter grid to track all pending statements

* fix more TODOs and format

* tweak a TODO in requests

* some logic for dispatching requests

* fmt

* skeleton for response receiving

* Async backing statement distribution: cluster tests (#6678)

* Add `pending_statements_set_when_receiving_fresh_statements`

* Add `pending_statements_updated_when_sending_statements` test

* fix up

* fmt

* update TODO

* rework seconded mask in requests

* change doc

* change unhandledresponse not to borrow request manager

* only accept responses sufficient to back

* finish implementing response handling

* extract statement filter to protocol crate

* rework requests: use statement filter in network protocol

* dispatch cluster requests correctly

* rework cluster statement sending

* implement request answering

* fmt

* only send confirmed candidate statement messages on unified relay-parent

* Fix Tests In Statement Distribution Branch

* Async Backing: Integrate `vstaging` of statement distribution into `lib.rs` (#6715)

* Integrate `handle_active_leaves_update`

* Integrate `share_local_statement`/`handle_backed_candidate_message`

* Start hooking up request/response flow

* Finish hooking up request/response flow

* Limit number of parallel requests in responder

* Fix test compilation errors

* Fix missing check for prospective parachains mode

* Fix some more compile errors

* clean up some review comments

* clean up warnings

* Async backing statement distribution: grid tests (#6673)

* Add `manifest_import_returns_ok_true` test

* cargo fmt

* Add pending_communication_receiving_manifest_on_confirmed_candidate

* Add `senders_can_provide_manifests_in_acknowledgement` test

* Add a couple of tests for pending statements

* Add `pending_statements_cleared_when_sending` test

* Add `pending_statements_respect_remote_knowledge` test

* Refactor group creation in tests

* Clarify docs

* Address some review comments

* Make some clarifications

* Fix post-merge errors

* Clarify test `senders_can_provide_manifests_in_acknowledgement`

* Try writing `pending_statements_are_updated_after_manifest_exchange`

* Document "seconding limit" and `reject_overflowing_manifests` test

* Test that seconding counts are not updated for validators on error

* Fix tests

* Fix manifest exchange test

* Add more tests in `requests.rs` (#6707)

This resolves remaining TODOs in this file.

* remove outdated inventory terminology

* Async backing statement distribution: `Candidates` tests (#6658)

* Async Backing: Fix clippy errors in statement distribution branch (#6720)

* Integrate `handle_active_leaves_update`

* Integrate `share_local_statement`/`handle_backed_candidate_message`

* Start hooking up request/response flow

* Finish hooking up request/response flow

* Limit number of parallel requests in responder

* Fix test compilation errors

* Fix missing check for prospective parachains mode

* Fix some more compile errors

* Async Backing: Fix clippy errors in statement distribution branch

* Fix some more clippy lints

* add tests module

* fix warnings in existing tests

* create basic test harness

* create a test state struct

* fmt

* create empty cluster & grid modules for tests

* some TODOs for cluster test suite

* describe test-suite for grid logic

* describe request test suite

* fix seconding-limit bug

* Remove extraneous `pub`

This somehow made it into my clippy PR.

* Fix some test compile warnings

* Remove some unneeded `allow`s

* adapt some new test helpers from Marcin

* add helper for activating a gossip topology

* add utility for signing statements

* helpers for connecting/disconnecting peers

* round out network utilities

* fmt

* fix bug in initializing validator-meta

* fix compilation

* implement first cluster test

* TODOs for incoming request tests

* Remove unneeded `make_committed_candidate` helper

* fmt

* some more tests for cluster

* add a TODO about grid senders

* integrate inbound req/res into test harness

* polish off initial cluster test suite

* keep introduce candidate request

* fix tests after introduce candidate request

* fmt

* Add grid protocol to module docs

* Fix comments

* Test `backed_in_path_only: true`

* Update node/network/protocol/src/lib.rs

Co-authored-by: Chris Sosnin <[email protected]>

* Update node/network/protocol/src/request_response/mod.rs

Co-authored-by: Chris Sosnin <[email protected]>

* Mark receiver with `vstaging`

* validate grid senders based on manifest kind

* fix mask_seconded/valid

* fix unwanted-mask check

* fix build

* resolve todo on leaf mode

* Unify protocol naming to vstaging

* fmt, fix grid test after topology change

* typo

Co-authored-by: Chris Sosnin <[email protected]>

* address review

* adjust comment, make easier to understand

* Fix typo

---------

Co-authored-by: Marcin S <[email protected]>
Co-authored-by: Marcin S <[email protected]>
Co-authored-by: Chris Sosnin <[email protected]>
Co-authored-by: Chris Sosnin <[email protected]>

* miscellaneous fixes to make asynchronous backing work (#6791)

* propagate network-protocol-staging feature

* add feature to adder-collator as well

* allow collation-generation of occupied cores

* prospective parachains: special treatment for pending availability candidates

* runtime: fetch candidates pending availability

* lazily construct PVD for pending candidates

* fix fallout in prospective parachains hypothetical/select_child

* runtime: enact candidates when creating paras-inherent

* make tests compile

* test pending availability in the scope

* add prospective parachains test

* fix validity constraints leftovers

* drop prints

* Fix typos

---------

Co-authored-by: Chris Sosnin <[email protected]>
Co-authored-by: Marcin S <[email protected]>

* Remove restart from test (#6840)

* Async Backing: Statement Distribution Tests (#6755)

* start on handling incoming

* split off session info into separate map

* start in on a knowledge tracker

* address some grumbles

* format

* missed comment

* some docs for direct

* add note on slashing

* amend

* simplify 'direct' code

* finish up the 'direct' logic

* add a bunch of tests for the direct-in-group logic

* rename 'direct' to 'cluster', begin a candidate_entry module

* distill candidate_entry

* start in on a statement-store module

* some utilities for the statement store

* rewrite 'send_statement_direct' using new tools

* filter sending logic on peers which have the relay-parent in their view.

* some more logic for handling incoming statements

* req/res: BackedCandidatePacket -> AttestedCandidate + tweaks

* add a `validated_in_group` bitfield to BackedCandidateInventory

* BackedCandidateInventory -> Manifest

* start in on requester module

* add outgoing request for attested candidate

* add a priority mechanism for requester

* some request dispatch logic

* add seconded mask to tagged-request

* amend manifest to hold group index

* handle errors and set up scaffold for response validation

* validate attested candidate responses

* requester -> requests

* add some utilities for manipulating requests

* begin integrating requester

* start grid module

* tiny

* refactor grid topology to expose more info to subsystems

* fix grid_topology test

* fix overseer test

* implement topology group-based view construction logic

* fmt

* flesh out grid slightly more

* add indexed groups utility

* integrate Groups into per-session info

* refactor statement store to borrow Groups

* implement manifest knowledge utility

* add a test for topology setup

* don't send to group members

* test for conflicting manifests

* manifest knowledge tests

* fmt

* rename field

* garbage collection for grid tracker

* routines for finding correct/incorrect advertisers

* add manifest import logic

* tweak naming

* more tests for manifest import

* add comment

* rework candidates into a view-wide tracker

* fmt

* start writing boilerplate for grid sending

* fmt

* some more group boilerplate

* refactor handling of topology and authority IDs

* fmt

* send statements directly to grid peers where possible

* send to cluster only if statement belongs to cluster

* improve handling of cluster statements

* handle incoming statements along the grid

* API for introduction of candidates into the tree

* backing: use new prospective parachains API

* fmt prospective parachains changes

* fmt statement-dist

* fix condition

* get ready for tracking importable candidates

* prospective parachains: add Cow logic

* incomplete and complete hypothetical candidates

* remove keep_if_unneeded

* fmt

* implement more general HypotheticalFrontier

* fmt, cleanup

* add a by_parent_hash index to candidate tracker

* more framework for future code

* utilities for getting all hypothetical candidates for frontier

* track origin in statement store

* fmt

* requests should return peer

* apply post-confirmation reckoning

* flesh out import/announce/circulate logic on new statements

* adjust

* adjust TODO comment

* fix  backing tests

* update statement-distribution to use new indexedvec

* fmt

* query hypothetical candidates

* implement `note_importable_under`

* extract common utility of fragment tree updates

* add a helper function for getting statements unknown by backing

* import fresh statements to backing

* send announcements and acknowledgements over grid

* provide freshly importable statements

also avoid tracking backed candidates in statement distribution

* do not issue requests on newly importable candidates

* add TODO for later when confirming candidate

* write a routine for handling backed candidate notifications

* simplify grid substantially

* add some test TODOs

* handle confirmed candidates & grid announcements

* finish implementing manifest handling, including follow up statements

* send follow-up statements when acknowledging freshly backed

* fmt

* handle incoming acknowledgements

* a little DRYing

* wire up network messages to handlers

* fmt

* some skeleton code for peer view update handling

* more peer view skeleton stuff

* Fix async backing statement distribution tests (#6621)

* Fix compile errors in tests

* Cargo fmt

* Resolve some todos in async backing statement-distribution branch (#6482)

* Implement `remove_by_relay_parent`

* Extract `minimum_votes` to shared primitives.

* Add `can_send_statements_received_with_prejudice` test

* Fix test

* Update docstrings

* Cargo fmt

* Fix compile error

* Fix compile errors in tests

* Cargo fmt

* Add module docs; write `test_priority_ordering` (first draft)

* Fix `test_priority_ordering`

* Move `insert_or_update_priority`: `Drop` -> `set_cluster_priority`

* Address review comments

* Remove `Entry::get_mut`

* fix test compilation

* add a TODO for a test

* clean up a couple of TODOs

* implement sending pending cluster statements

* refactor utility function for sending acknowledgement and statements

* mostly implement catching peers up via grid

* Fix clippy error

* alter grid to track all pending statements

* fix more TODOs and format

* tweak a TODO in requests

* some logic for dispatching requests

* fmt

* skeleton for response receiving

* Async backing statement distribution: cluster tests (#6678)

* Add `pending_statements_set_when_receiving_fresh_statements`

* Add `pending_statements_updated_when_sending_statements` test

* fix up

* fmt

* update TODO

* rework seconded mask in requests

* change doc

* change unhandledresponse not to borrow request manager

* only accept responses sufficient to back

* finish implementing response handling

* extract statement filter to protocol crate

* rework requests: use statement filter in network protocol

* dispatch cluster requests correctly

* rework cluster statement sending

* implement request answering

* fmt

* only send confirmed candidate statement messages on unified relay-parent

* Fix Tests In Statement Distribution Branch

* Async Backing: Integrate `vstaging` of statement distribution into `lib.rs` (#6715)

* Integrate `handle_active_leaves_update`

* Integrate `share_local_statement`/`handle_backed_candidate_message`

* Start hooking up request/response flow

* Finish hooking up request/response flow

* Limit number of parallel requests in responder

* Fix test compilation errors

* Fix missing check for prospective parachains mode

* Fix some more compile errors

* clean up some review comments

* clean up warnings

* Async backing statement distribution: grid tests (#6673)

* Add `manifest_import_returns_ok_true` test

* cargo fmt

* Add pending_communication_receiving_manifest_on_confirmed_candidate

* Add `senders_can_provide_manifests_in_acknowledgement` test

* Add a couple of tests for pending statements

* Add `pending_statements_cleared_when_sending` test

* Add `pending_statements_respect_remote_knowledge` test

* Refactor group creation in tests

* Clarify docs

* Address some review comments

* Make some clarifications

* Fix post-merge errors

* Clarify test `senders_can_provide_manifests_in_acknowledgement`

* Try writing `pending_statements_are_updated_after_manifest_exchange`

* Document "seconding limit" and `reject_overflowing_manifests` test

* Test that seconding counts are not updated for validators on error

* Fix tests

* Fix manifest exchange test

* Add more tests in `requests.rs` (#6707)

This resolves remaining TODOs in this file.

* remove outdated inventory terminology

* Async backing statement distribution: `Candidates` tests (#6658)

* Async Backing: Fix clippy errors in statement distribution branch (#6720)

* Integrate `handle_active_leaves_update`

* Integrate `share_local_statement`/`handle_backed_candidate_message`

* Start hooking up request/response flow

* Finish hooking up request/response flow

* Limit number of parallel requests in responder

* Fix test compilation errors

* Fix missing check for prospective parachains mode

* Fix some more compile errors

* Async Backing: Fix clippy errors in statement distribution branch

* Fix some more clippy lints

* add tests module

* fix warnings in existing tests

* create basic test harness

* create a test state struct

* fmt

* create empty cluster & grid modules for tests

* some TODOs for cluster test suite

* describe test-suite for grid logic

* describe request test suite

* fix seconding-limit bug

* Remove extraneous `pub`

This somehow made it into my clippy PR.

* Fix some test compile warnings

* Remove some unneeded `allow`s

* adapt some new test helpers from Marcin

* add helper for activating a gossip topology

* add utility for signing statements

* helpers for connecting/disconnecting peers

* round out network utilities

* fmt

* fix bug in initializing validator-meta

* fix compilation

* implement first cluster test

* TODOs for incoming request tests

* Remove unneeded `make_committed_candidate` helper

* fmt

* Hook up request sender

* Add `valid_statement_without_prior_seconded_is_ignored` test

* Fix `valid_statement_without_prior_seconded_is_ignored` test

* some more tests for cluster

* add a TODO about grid senders

* integrate inbound req/res into test harness

* polish off initial cluster test suite

* keep introduce candidate request

* fix tests after introduce candidate request

* fmt

* Add grid protocol to module docs

* Remove obsolete test

* Fix comments

* Test `backed_in_path_only: true`

* Update node/network/protocol/src/lib.rs

Co-authored-by: Chris Sosnin <[email protected]>

* Update node/network/protocol/src/request_response/mod.rs

Co-authored-by: Chris Sosnin <[email protected]>

* Mark receiver with `vstaging`

* First draft of `ensure_seconding_limit_is_respected` test

* validate grid senders based on manifest kind

* fix mask_seconded/valid

* fix unwanted-mask check

* fix build

* resolve todo on leaf mode

* Unify protocol naming to vstaging

* Fix `ensure_seconding_limit_is_respected` test

* Start `backed_candidate_leads_to_advertisement` test

* fmt, fix grid test after topology change

* Send Backed notification

* Finish `backed_candidate_leads_to_advertisement` test

* Finish `peer_reported_for_duplicate_statements` test

* Finish `received_advertisement_before_confirmation_leads_to_request`

* Add `advertisements_rejected_from_incorrect_peers` test

* Add `manifest_rejected_*` tests

* Add `manifest_rejected_when_group_does_not_match_para` test

* Add `local_node_sanity_checks_incoming_requests` test

* Add `local_node_respects_statement_mask` test

* Add tests where peer is reported for providing invalid signatures

* Add `cluster_peer_allowed_to_send_incomplete_statements` test

* Add `received_advertisement_after_backing_leads_to_acknowledgement`

* Add `received_advertisement_after_confirmation_before_backing` test

* peer_reported_for_advertisement_conflicting_with_confirmed_candidate

* Add `peer_reported_for_not_enough_statements` test

* Add `peer_reported_for_providing_statements_meant_to_be_masked_out`

* Add `additional_statements_are_shared_after_manifest_exchange`

* Add `grid_statements_imported_to_backing` test

* Add `relay_parent_entering_peer_view_leads_to_advertisement` test

* Add `advertisement_not_re_sent_when_peer_re_enters_view` test

* Update node/network/statement-distribution/src/vstaging/tests/grid.rs

Co-authored-by: asynchronous rob <[email protected]>

* Resolve TODOs, update test

* Address unused code

* Add check after every test for unhandled requests

* Refactor (`make_dummy_leaf` and `handle_sent_request`)

* Refactor (`make_dummy_topology`)

* Minor refactor

---------

Co-authored-by: Robert Habermeier <[email protected]>
Co-authored-by: Chris Sosnin <[email protected]>
Co-authored-by: Chris Sosnin <[email protected]>

* Fix some clippy lints in tests

* Async backing: minor fixes (#6920)

* bitfield-distribution test

* implicit view tests

* Refactor parameters -> params

* scheduler: update storage migration (#6963)

* update scheduler migration

* Adjust weight to account for storage read

* Statement Distribution Guide Edits (#7025)

* Statement distribution guide edits

* Addressed Marcin's comments

* Add attested candidate request retry timeouts (#6833)

Co-authored-by: Chris Sosnin <[email protected]>
Co-authored-by: asynchronous rob <[email protected]>
Co-authored-by: Robert Habermeier <[email protected]>
Co-authored-by: Chris Sosnin <[email protected]>
Fix async backing statement distribution tests (#6621)
Resolve some todos in async backing statement-distribution branch (#6482)
Fix clippy errors in statement distribution branch (#6720)

* Async backing: add Prospective Parachains impl guide (#6933)

Co-authored-by: Bradley Olson <[email protected]>

* Updates to Provisioner Guide for Async Backing (#7106)

* Initial corrections and clarifications

* Partial first draft

* Finished first draft

* Adding back wrongly removed test bit

* fmt

* Update roadmap/implementers-guide/src/node/utility/provisioner.md

Co-authored-by: Marcin S. <[email protected]>

* Addressing comments

* Reorganization

* fmt

---------

Co-authored-by: Marcin S. <[email protected]>

* fmt

* Renaming Parathread Mentions (#7287)

* Renaming parathreads

* Renaming module to pallet

* More updates

* PVF: Refactor workers into separate crates, remove host dependency (#7253)

* PVF: Refactor workers into separate crates, remove host dependency

* Fix compile error

* Remove some leftover code

* Fix compile errors

* Update Cargo.lock

* Remove worker main.rs files

I accidentally copied these from the other PR. This PR isn't intended to
introduce standalone workers yet.

* Address review comments

* cargo fmt

* Update a couple of comments

* Update log targets

* Update quote to 1.0.27 (#7280)

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: parity-processbot <>

* pallets: implement `Default` for `GenesisConfig` in `no_std` (#7271)

* pallets: implement Default for GenesisConfig in no_std

This change is follow-up of: https://github.com/paritytech/substrate/pull/14108

It is a step towards: https://github.com/paritytech/substrate/issues/13334

* Cargo.lock updated

* update lockfile for {"substrate"}

---------

Co-authored-by: parity-processbot <>

* cli: enable BEEFY by default on test networks (#7293)

We consider BEEFY mature enough to run by default on all nodes
for test networks (Rococo/Wococo/Versi).

Right now, most nodes are not running it since it's opt-in using
--beefy flag. Switch to an opt-out model for test networks.

Replace --beefy flag from CLI with --no-beefy and have BEEFY
client start by default on test networks.

Signed-off-by: acatangiu <[email protected]>

* runtime: past session slashing runtime API (#6667)

* runtime/vstaging: unapplied_slashes runtime API

* runtime/vstaging: key_ownership_proof runtime API

* runtime/ParachainHost: submit_report_dispute_lost

* fix key_ownership_proof API

* runtime: submit_report_dispute_lost runtime API

* nits

* Update node/subsystem-types/src/messages.rs

Co-authored-by: Marcin S. <[email protected]>

* revert unrelated fmt changes

* post merge fixes

* fix compilation

---------

Co-authored-by: Marcin S. <[email protected]>

* Correcting git mishap

* Document usage of `gum` crate (#7294)

* Document usage of gum crate

* Small fix

* Add some more basic info

* Update node/gum/src/lib.rs

Co-authored-by: Andrei Sandu <[email protected]>

* Update target docs

---------

Co-authored-by: Andrei Sandu <[email protected]>

* XCM: Fix issue with RequestUnlock (#7278)

* XCM: Fix issue with RequestUnlock

* Leave API changes for v4

* Fix clippy errors

* Fix tests

---------

Co-authored-by: parity-processbot <>

* Companion for Substrate#14228 (#7295)

* Companion for Substrate#14228

https://github.com/paritytech/substrate/pull/14228

* update lockfile for {"substrate"}

---------

Co-authored-by: parity-processbot <>

* Companion for #14237: Use latest sp-crates (#7300)

* To revert: Update substrate branch to "lexnv/bump_sp_crates"

Signed-off-by: Alexandru Vasile <[email protected]>

* Revert "To revert: Update substrate branch to "lexnv/bump_sp_crates""

This reverts commit 5f1db84eac4a226c37b7f6ce6ee19b49dc7e2008.

* Update cargo lock

Signed-off-by: Alexandru Vasile <[email protected]>

* Update cargo.lock

Signed-off-by: Alexandru Vasile <[email protected]>

* Update cargo.lock

Signed-off-by: Alexandru Vasile <[email protected]>

---------

Signed-off-by: Alexandru Vasile <[email protected]>

* bounded-collections bump to 0.1.7 (#7305)

* bounded-collections bump to 0.1.7

Companion for: paritytech/substrate#14225

* update lockfile for {"substrate"}

---------

Co-authored-by: parity-processbot <>

* bump to quote 1.0.28 (#7306)

* `RollingSessionWindow` cleanup (#7204)

* Replace `RollingSessionWindow` with `RuntimeInfo` - initial commit

* Fix tests in import

* Fix the rest of the tests

* Remove dead code

* Fix todos

* Simplify session caching

* Comments for `SessionInfoProvider`

* Separate `SessionInfoProvider` from `State`

* `cache_session_info_for_head` becomes freestanding function

* Remove unneeded `mut` usage

* fn session_info -> fn get_session_info() to avoid name clashes. The function also tries to initialize `SessionInfoProvider`

* Fix SessionInfo retrieval

* Code cleanup

* Don't wrap `SessionInfoProvider` in an `Option`

* Remove `earliest_session()`

* Remove pre-caching -> wip

* Fix some tests and code cleanup

* Fix all tests

* Fixes in tests

* Fix comments, variable names and small style changes

* Fix a warning

* impl From<SessionWindowSize> for NonZeroUsize

* Fix logging for `get_session_info` - remove redundant logs and decrease log level to DEBUG

* Code review feedback

* Storage migration removing `COL_SESSION_WINDOW_DATA` from parachains db

* Remove `col_session_data` usages

* Storage migration clearing columns w/o removing them

* Remove session data column usages from `approval-voting` and `dispute-coordinator` tests

* Add some test cases from `RollingSessionWindow` to `dispute-coordinator` tests

* Fix formatting in initialized.rs

* Fix a corner case in `SessionInfo` caching for `dispute-coordinator`

* Remove `RollingSessionWindow` ;(

* Revert "Fix formatting in initialized.rs"

This reverts commit 0f94664ec9f3a7e3737a30291195990e1e7065fc.

* v2 to v3 migration drops `COL_DISPUTE_COORDINATOR_DATA` instead of clearing it

* Fix `NUM_COLUMNS` in `approval-voting`

* Use `columns::v3::NUM_COLUMNS` when opening db

* Update node/service/src/parachains_db/upgrade.rs

Co-authored-by: Andrei Sandu <[email protected]>

* Don't write in `COL_DISPUTE_COORDINATOR_DATA` for `test_rocksdb_migrate_2_to_3`

* Fix `NUM+COLUMNS` in approval_voting

* Fix formatting

* Fix columns usage

* Clarification comments about the different db versions

---------

Co-authored-by: Andrei Sandu <[email protected]>

* pallet-para-config: Remove remnant WeightInfo functions (#7308)

* pallet-para-config: Remove remnant WeightInfo functions

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* set_config_with_weight begone

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* ".git/.scripts/commands/bench/bench.sh" runtime kusama-dev runtime_parachains::configuration

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: command-bot <>

* XCM: PayOverXcm config (#6900)

* Move XCM query functionality to trait

* Fix tests

* Add PayOverXcm implementation

* fix the PayOverXcm trait to compile

* moved doc comment out of trait implmeentation and to the trait

* PayOverXCM documentation

* Change documentation a bit

* Added empty benchmark methods implementation and changed docs

* update PayOverXCM to convert AccountIds to MultiLocations

* Implement benchmarking method

* Change v3 to latest

* Descend origin to an asset sender (#6970)

* descend origin to an asset sender

* sender as tuple of dest and sender

* Add more variants to the QueryResponseStatus enum

* Change Beneficiary to Into<[u8; 32]>

* update PayOverXcm to return concrete errors and use AccountId as sender

* use polkadot-primitives for AccountId

* fix dependency to use polkadot-core-primitives

* force Unpaid instruction to the top of the instructions list

* modify report_outcome to accept interior argument

* use new_query directly for building final xcm query, instead of report_outcome

* fix usage of new_query to use the XcmQueryHandler

* fix usage of new_query to use the XcmQueryHandler

* tiny method calling fix

* xcm query handler (#7198)

* drop redundant query status

* rename ReportQueryStatus to OuterQueryStatus

* revert rename of QueryResponseStatus

* update mapping

* Update xcm/xcm-builder/src/pay.rs

Co-authored-by: Gavin Wood <[email protected]>

* Updates

* Docs

* Fix benchmarking stuff

* Destination can be determined based on asset_kind

* Tweaking API to minimise clones

* Some repotting and docs

---------

Co-authored-by: Anthony Alaribe <[email protected]>
Co-authored-by: Muharem Ismailov <[email protected]>
Co-authored-by: Anthony Alaribe <[email protected]>
Co-authored-by: Gavin Wood <[email protected]>

* Companion for #14265 (#7307)

* Update Cargo.lock

Signed-off-by: Alexandru Vasile <[email protected]>

* Update Cargo.lock

Signed-off-by: Alexandru Vasile <[email protected]>

---------

Signed-off-by: Alexandru Vasile <[email protected]>
Co-authored-by: parity-processbot <>

* bump serde to 1.0.163 (#7315)

* bump serde to 1.0.163

* bump ci

* update lockfile for {"substrate"}

---------

Co-authored-by: parity-processbot <>

* fmt

* Updated fmt

* Removing changes accidentally pulled from master

* fix another master pull issue

* Another master pull fix

* fmt

* Fixing implementers guide build

* Revert "Merge branch 'rh-async-backing-feature-while-frozen' of https://github.com/paritytech/polkadot into brad-rename-parathread"

This reverts commit bebc24af52ab61155e3fe02cb3ce66a592bce49c, reversing
changes made to 1b2de662dfb11173679d6da5bd0da9d149c85547.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Signed-off-by: acatangiu <[email protected]>
Signed-off-by: Alexandru Vasile <[email protected]>
Co-authored-by: Marcin S <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Michal Kucharczyk <[email protected]>
Co-authored-by: Adrian Catangiu <[email protected]>
Co-authored-by: ordian <[email protected]>
Co-authored-by: Marcin S. <[email protected]>
Co-authored-by: Andrei Sandu <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Alexandru Vasile <[email protected]>
Co-authored-by: Sam Johnson <[email protected]>
Co-authored-by: Tsvetomir Dimitrov <[email protected]>
Co-authored-by: Anthony Alaribe <[email protected]>
Co-authored-by: Muharem Ismailov <[email protected]>
Co-authored-by: Anthony Alaribe <[email protected]>
Co-authored-by: Gavin Wood <[email protected]>

* fix bitfield distribution test

* approval distribution tests

* fix bridge tests

* update Cargo.lock

* [async-backing-branch] Optimize collator-protocol validator-side request fetching (#7457)

* Optimize collator-protocol validator-side request fetching

* address feedback: replace tuples with structs

* feedback: add doc comments

* move collation types to subfolder

---------

Signed-off-by: alindima <[email protected]>

* Update collation generation for asynchronous backing (#7405)

* break candidate receipt construction and distribution into own function

* update implementers' guide to include SubmitCollation

* implement SubmitCollation for collation-generation

* fmt

* fix test compilation & remove unnecessary submodule

* add some TODOs for a test suite.

* Update roadmap/implementers-guide/src/types/overseer-protocol.md

Co-authored-by: Andrei Sandu <[email protected]>

* add new test harness and first test

* refactor to avoid requiring background sender

* ensure collation gets packaged and distributed

* tests for the fallback case with no hint

* add parent rp-number hint tests

* fmt

* update uses of CollationGenerationConfig

* fix remaining test

* address review comments

* use subsystemsender for background tasks

* fmt

* remove ValidationCodeHashHint and related tests

---------

Co-authored-by: Andrei Sandu <[email protected]>

* fix some more fallout from merge

* fmt

* remove staging APIs from Rococo & Westend (#7513)

* send network messages on main protocol name (#7515)

* misc async backing improvements for allowed ancestry blocks (#7532)

* shared: fix acquire_info

* backwards-compat test for prospective parachains

* same relay parent is allowed

* provisioner: request candidate receipt by relay parent (#7527)

* return candidates hash from prospective parachains

* update provisioner

* update tests

* guide changes

* send a single message to backing

* fix test

* revert to old `handle_new_activations` logic in some cases (#7514)

* revert to old `handle_new_activations` logic

* gate sending messages on scheduled cores to max_depth >= 2

* fmt

* 2->1

* Omnibus asynchronous backing bugfix PR (#7529)

* fix a bug in backing

* add some more logs

* prospective parachains: take ancestry only up to session bounds

* add test

* fix zombienet tests (#7614)

Signed-off-by: Andrei Sandu <[email protected]>

* fix runtime compilation

* make bitfield distribution tests compile

* attempt to fix zombienet disputes (#7618)

* update metric name

* update some metric names

* avoid cycles when creating fake candidates

* make undying collator more friendly to malformed parents

* fix a bug in malus

* fmt

* clippy

* add RUN_IN_CONTAINER to new ZombieNet tests (#7631)

* remove duplicated migration

happened because of master-merge

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Signed-off-by: acatangiu <[email protected]>
Signed-off-by: Alexandru Vasile <[email protected]>
Signed-off-by: alindima <[email protected]>
Signed-off-by: Andrei Sandu <[email protected]>
Co-authored-by: Chris Sosnin <[email protected]>
Co-authored-by: Parity Bot <[email protected]>
Co-authored-by: Chris Sosnin <[email protected]>
Co-authored-by: Robert Klotzner <[email protected]>
Co-authored-by: Robert Klotzner <[email protected]>
Co-authored-by: Marcin S <[email protected]>
Co-authored-by: Marcin S <[email protected]>
Co-authored-by: Mattia L.V. Bradascio <[email protected]>
Co-authored-by: Bradley Olson <[email protected]>
Co-authored-by: alexgparity <[email protected]>
Co-authored-by: BradleyOlson64 <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Michal Kucharczyk <[email protected]>
Co-authored-by: Adrian Catangiu <[email protected]>
Co-authored-by: ordian <[email protected]>
Co-authored-by: Andrei Sandu <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Alexandru Vasile <[email protected]>
Co-authored-by: Sam Johnson <[email protected]>
Co-authored-by: Tsvetomir Dimitrov <[email protected]>
Co-authored-by: Anthony Alaribe <[email protected]>
Co-authored-by: Muharem Ismailov <[email protected]>
Co-authored-by: Anthony Alaribe <[email protected]>
Co-authored-by: Gavin Wood <[email protected]>
Co-authored-by: Alin Dima <[email protected]>

* First baby steps

* Split scheduler into several modules

* Towards a more modular approach for scheduling

* move free_cores; IntoInterator -> BTreeMap

* Move clear()

* Move more functions out of scheduler

* Change weight composition

* More abstraction

* Further refactor

* clippy

* fmt

* fix test-runtime

* Add parathreads pallet to construct_runtime!

* Make all runtimes use (Parachains, Parathreads) scheduling

* Delete commented out code

* Remove parathreads scheduler from westend, rococo, and kusama

* fix rococo, westend, and kusama config

* Revert "fix rococo, westend, and kusama config"

This reverts commit 59e4de380d5c7d17eaaba5e2c2b81405de3465e3.

* Revert "Remove parathreads scheduler from westend, rococo, and kusama"

This reverts commit 4c44255296083ac5670560790ed77104917890a4.

* Remove CoreIndex from free_cores

* Remove unnecessary struct for parathreads

* parathreads provider take 1

* Comment out parathread tests

* Pop into lookahead

* fmt

* Fill lookahead with two entries for parachains

* fmt

* Current stage

* Towards ab parathreads

* no AB use

* Make tests typecheck

* quick hack to set scheduling lookahead to 1

* Fix scheduler tests

* fix paras_inherent tests

* misc

* Update more of a test

* cfg(test)

* some cleanup

* Undo paras_inherent changes

* Adjust paras inherent tests

* Undo changes to v2 primitives

* Undo v2 mod changes to tests

* minor

* Remove parathreads assigner and pallet

* minor

* minor

* more cleanup

* fmt

* minor

* minor

* minor

* Remove on_new_session from assignment provider

* Make adder collator integration test pass

* disable failing unit tests

* minor

* minor

* re-enable one unit test

* minor

* handle retries, add concluded para to pop interface

* comment out unused code

* Remove core_para from interface

* Remove first claimqueue element on clear if None instead removing all Nones

* Move claimqueue get out of loop

* Use VecDeque instead of Ved in ClaimQueue

* Make occupied() AB ready(?)

* handle freed disputed in clear_and_fill_claimqueue

* clear_and_fill_claimqueue returns scheduled Vec

* Rename and minor refactor

* return position of assignment taken from claimqueue

* minor

* Fix session boundary parachains number change + extended test

* Fix runtimes

* Fix polkadot runtime

* Remove polkadot pallet from benchmarks

* fix test runtime

* Add storage migration

* Minor refactor

* Minor

* migratin typechecks

* Add migration to runtimes

* Towards modular scheduling II (#6568)

* Add post migration check

* pebkac

* Disable migrations but mine

* Revert "Disable migrations but mine"

This reverts commit 4fa5c5a370c199944a7e0926f50b08626bfbad4c.

* Move scheduler migration

* Revert "Move scheduler migration"

This reverts commit a16b1659a907950bae048a9f7010f2aa76e02b6d.

* Fix migration

* cleanup

* Don't lose retries value anymore

* comment out test function

* Remove retries value from Assignment again

* minor

* Make collator for parathreads optional

* data type refactor

* update scheduler tests

* Change test function cfg

* comment out test function

* Try cfg(test) only

* fix cfg flags

* Add get_max_retries function to provider interface (#7047)

* Fix merge commit

* pebkac

* fix merge

* update cargo.lock

* fix merge

* fix merge

* Use btreemap instead of vec, fix scheduler calls.

* Use imported `ScheduledCore`

* Remove unused import in inclusion tests

* Use keys() instead of mapping over a BTreeMap

* Fix migrations for parachains scheduler

* Use BlockNumberFor<T> everywhere in scheduler

* Add on demand assignment provider pallet (#7110)

* Address some PR comments

* minor

* more cleanup

* find_map and timeout availability fixes

* Change default scheduling_lookahead to 1

* Add on demand assignment provider pallet

* Move test-runtime to new assignment provider

* Run cargo format on scheduler tests

* minor

* Mutate cores in single loop

* timeout predicate simplification

* claimqueue desired size fix

* Replace expect by ok_or

* More improvements

* Fix push back order and next_up_on_timeout

* minor

* session change docs

* Add pre_new_session call to hand pre session updates

* Remove sc_network dependency and PeerId from unnecessary data structures

* Remove unnecessary peer_ids

* Add OnDemandOrdering proxy (#7156)

* Add OnDemandBidding proxy

* Fix names

* OnDemandAssigner for rococo only

* Check PeerId in collator protocol before fetching collation

* On occupied, remove non occupied cores from the claimqueue front and refill

* Add missing docs

* Comment out unused field

* fix ScheduledCore in tests

* Fix the fix

* pebkac

* fmt

* Fix occupied dropping

* Remove double import

* ScheduledCore fixes

* Readd sc-network dep

* pebkac

* OpaquePeerId -> PeerId in can_collate interface

* Cargo.lock update for interface change

* Remove checks not needed anymore?

* Drop occupied core on session change if it would time out after the new session

* Add on demand assignment provider pallet

* Move test-runtime to new assignment provider

* Run cargo format on scheduler tests

* Add OnDemandOrdering proxy (#7156)

* Add OnDemandBidding proxy

* Fix names

* OnDemandAssigner for rococo only

* Remove unneeded config values

* Update comments

* Use and_then for queue position

* Return the max size of the spot queue on error

* Add comments to add_parathread_entry

* Add module comments

* Add log for when can_collate fails

* Change assigner queue type to `Assignment`

* Update assignment provider tests

* More logs

* Remove unused keyring import

* disable can_collate

* comment out can_collate

* Can collate first checks set if empty

* Move can_collate call to collation advertisement

* Fix backing test

* map to loop

* Remove obsolete check

* Move invalid collation test from backing to collator-protocol

* fix unused imports

* fix test

* fix Debug derivation

* Increase time limit on zombienet predicates

* Increase zombienet timeout

* Minor

* Address some PR comments

* Address PR comments

* Comment out failing assert due to on-demand assigner missing

* remove collator_restrictions info from backing

* Move can_collate to ActiveParas

* minor

* minor

* Update weight information for on demand config

* Add ttl to parasentry

* Fix tests missing parasentry ttl

* Adjust scheduler tests to use ttl default values

* Use match instead of if let for ttl drop

* Use RuntimeDebug trait for `ParasEntry` fields

* Add comments to on demand assignment pallet

* Fix spot traffic calculation

* Revert runtimedebug changes to primitives

* Remove runtimedebug derivation from `ParasEntry`

* Mention affinity in pallet level docs

* Use RuntimeDebug trait for ParasEntry child types

* Remove collator restrictions

* Fix primitive versioning and other merge issues

* Fix tests post merge

* Fix node side tests

* Edit parascheduler migration for clarity

* Move parascheduler migration up to next release

* Remove vestiges from merge

* Fix tests

* Refactor ttl handling

* Remove unused things from scheduler tests

* Move on demand assigner to own directory

* Update documentation

* Remove unused sc-network dependency in primitives

Was used for collator restrictions

* Remove unused import

* Reenable scheduler test

* Remove unused storage value

* Enable timeout predicate test and fix fn

Turns out that the issue with the compiler is fixed and we can now
use impl Trait in the manner used here.

* Remove unused imports

* Add benchmarking entry for perbill in config

* Correct typo

* Address review comments

* Log out errors when calculating spot traffic.

* Change parascheduler's log target name

* Update scheduler_common documentation

* Use mutate for affinity fns, add tests

* Add another on demand affinity test

* Unify parathreads and parachains in HostConfig (take 2) (#7452)

* Unify parathreads and parachains in HostConfig

* Fixed missed occurences

* Remove commented out lines

* `HostConfiguration v7`

* Fix version check

* Add `MigrateToV7` to `Unreleased`

* fmt

* fmt

* Fix compilation errors after the rebase

* Update runtime/parachains/src/scheduler/tests.rs

Co-authored-by: Anton Vilhelm Ásgeirsson <[email protected]>

* Update runtime/parachains/src/scheduler/tests.rs

Co-authored-by: Anton Vilhelm Ásgeirsson <[email protected]>

* fmt

* Fix migration test

* Fix tests

* Remove unneeded assert from tests

* parathread_cores -> on_demand_cores; parathread_retries -> on_demand_retries

* Fix a compilation error in tests

* Remove unused `use`

* update colander image version

---------

Co-authored-by: alexgparity <[email protected]>
Co-authored-by: Anton Vilhelm Ásgeirsson <[email protected]>
Co-authored-by: Javier Viola <[email protected]>

* Fix branch after merge with master

* Refactor out duplicate checks into a helper fn

* Fix tests post merge

* Rename add_parathread_assignment, add test

* Update docs

* Remove unused on_finalize function

* Add weight info to on demand pallet

* Update runtime/parachains/src/configuration.rs

Co-authored-by: Tsvetomir Dimitrov <[email protected]>

* Update runtime/parachains/src/scheduler_common/mod.rs

Co-authored-by: Tsvetomir Dimitrov <[email protected]>

* Update runtime/parachains/src/assigner_on_demand/mod.rs

Co-authored-by: Tsvetomir Dimitrov <[email protected]>

* Add benchmarking to on demand pallet

* Make place_order test check for success

* Add on demand benchmarks

* Add local test weights to rococo runtime

* Modify TTL drop behaviour to not skip claims

Previous behaviour would jump a new claim from the assignment provider
ahead in the claimqueue, assuming lookahead is larger than 1.

* Refactor ttl test to test claimqueue order

* Disable place_order ext. when no on_demand cores

* Use default genesis config for benchmark tests

* Refactor config builder param

* Move lifecycle test from scheduler to on demand

* Remove unneeded lifecycle test

Paras module via the parachain assignment provider doesn't provide
new assignments if a parachain loses it's lease. The on demand
assignment provider doesn't provide an assignment that is not a
parathread.

* Re enable validator shuffle test

* More realistic weights for place_order

* Remove redundant import

* Fix backwards compatibility (hopefully)

* ".git/.scripts/commands/bench/bench.sh" --subcommand=runtime --runtime=rococo --target_dir=polkadot --pallet=runtime_parachains::assigner_on_demand

* Fix tests.

* Fix off-by-one.

* Re enable claimqueue fills test

* Re enable schedule_rotates_groups test

* Fix fill_claimqueue_fills test

* Re enable next_up_on_timeout test, move fn

* Do not pop from assignment provider when retrying

* Fix tests missing collator in scheduledcore

* Add comment about timeout predicate.

* Rename parasentry retries to availability timeouts

* Re enable schedule_schedules... test

* Refactor prune retried test to new scheduler

* Have all scheduler tests use genesis_cfg fn

* Update docs

* Update copyright notices on new files

* Rename is_parachain_core to is_bulk_core

* Remove erroneous TODO

* Simplify import

* ".git/.scripts/commands/bench/bench.sh" --subcommand=runtime --runtime=rococo --target_dir=polkadot --pallet=runtime_parachains::configuration

* Revert AdvertiseCollation order shuffle

* Refactor place_order into keepalive and allowdeath

* Revert rename of hrmp max inbound channels

parachain encompasses both on demand and slot auction / bulk.

* Restore availability_timeout_predicate function

* Clean up leftover comments

* Update runtime/parachains/src/scheduler/tests.rs

Co-authored-by: Tsvetomir Dimitrov <[email protected]>

* ".git/.scripts/commands/bench/bench.sh" --subcommand=runtime --runtime=westend --target_dir=polkadot --pallet=runtime_parachains::configuration

---------

Co-authored-by: alexgparity <[email protected]>
Co-authored-by: alexgparity <[email protected]>
Co-authored-by: Tsvetomir Dimitrov <[email protected]>
Co-authored-by: Javier Viola <[email protected]>
Co-authored-by: eskimor <[email protected]>
Co-authored-by: command-bot <>

* On Demand - update weights and small nits (#7605)

* Remove collator restriction test in inclusion

On demand parachains won't have collator restrictions implemented in
this way but will instead use a preferred collator registered to a
`ParaId` in `paras_registrar`.

* Remove redundant config guard for test fns

* Update weights

* Update WeightInfo for on_demand assigner

* Unify assignment provider parameters into one call (#7606)

* Combine assignmentprovider params into one fn call

* Move scheduler_common to a module under scheduler

* Fix ttl handling in benchmark builder

* Run cargo format

* Remove obsolete test.

* Small improvement.

* Use same migration pattern as config module

* Remove old TODO

* Change log target name for assigner on demand

* Fix migration

* Fix clippy warnings

* Add HostConfiguration storage migration to V8

* Add `MigrateToV8` to unreleased migrations for all runtimes

* Fix storage version check for config v8

* Set `StorageVersion` to 8 in `MigrateToV8`

* Remove dups.

* Update primitives/src/v5/mod.rs

Co-authored-by: Bastian Köcher <[email protected]>

---------

Co-authored-by: alexgparity <[email protected]>
Co-authored-by: alexgparity <[email protected]>
Co-authored-by: antonva <[email protected]>
Co-authored-by: Tsvetomir Dimitrov <[email protected]>
Co-authored-by: Anton Vilhelm Ásgeirsson <[email protected]>
Co-authored-by: Javier Viola <[email protected]>
Co-authored-by: eskimor <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>