- Jan 30, 2024
-
-
Oliver Tale-Yazdi authored
Add `Balances::force_adjust_total_issuance` as preparation for fixing https://github.com/polkadot-fellows/runtimes/issues/147 . Important changes in `substrate/frame/balances/src/lib.rs`. TODO: - [x] Update weights --------- Signed-off-by:
Oliver Tale-Yazdi <[email protected]> Co-authored-by: command-bot <> Co-authored-by:
Bastian Köcher <[email protected]>
-
dharjeezy authored
closes https://github.com/polkadot-fellows/help-center/issues/1 --------- Signed-off-by:
Oliver Tale-Yazdi <[email protected]> Co-authored-by: command-bot <> Co-authored-by:
Oliver Tale-Yazdi <[email protected]>
-
Clara van Staden authored
To deploy https://github.com/paritytech/polkadot-sdk/pull/3029 Co-authored-by: claravanstaden <Cats 4 life!>
-
Oliver Tale-Yazdi authored
Reverts paritytech/polkadot-sdk#2302.
🤦 ♂️ should have checked the migration CI first. We either need to reduce the `max_message_size` for the open HRMP channels on the failing chains or increase the `PageSize` of the XCMP queue. Both would be fine on a test-net, but i assume this will also fail before the next SP runtime upgrade so first need to think what best to do. AFAIK its not possible currently to change the `max_message_size` of an open HRMP channel. -
Bastian Köcher authored
Closes: https://github.com/paritytech/polkadot-sdk/issues/3123
-
Clara van Staden authored
- Prepares for the Deneb hardfork on Sepolia testnet on 31 January (needs to be deployed to Rococo before then) - Removes `beacon-minimal-spec` flag for simpler config - Adds test comments --------- Co-authored-by:
Ron <[email protected]> Co-authored-by: claravanstaden <Cats 4 life!> Co-authored-by:
Alistair Singh <[email protected]>
-
- Jan 29, 2024
-
-
Oliver Tale-Yazdi authored
Remove `without_storage_info` from the XCMP queue pallet. Part of https://github.com/paritytech/polkadot-sdk/issues/323 Changes: - Limit the number of channels that can be suspended at the same time. - Limit the number of channels that can have messages or signals pending at the same time. A No-OP migration is put in place to ensure that all `BoundedVec`s still decode and not truncate after upgrade. The storage version is thereby bumped to 4 to have our tooling remind us to deploy that migration. --------- Signed-off-by:
Oliver Tale-Yazdi <[email protected]> Co-authored-by:
Francisco Aguirre <[email protected]>
-
Svyatoslav Nikolsky authored
extracted useful code from #2982 This PR: - adds test 2 for Rococo <> Westend bridge: checks that relayer doesn't submit any extra headers while there are no any messages; - adds test 3 for Rococo <> Westend bridge: checks that relayer doesn't submit any extra headers when there are messages; - fixes most of comments from #2439 (like: log names, ability to run specify test number when calling `run-tests.sh`). Right now of all our tests, only test 2 is working (until BHs will be upgraded to use async backing), so you can test it with `./bridges/zombienet/run-tests.sh --test 2` locally.
-
s0me0ne-unkn0wn authored
Currently, collators and their alongside nodes spin up a full-scale overseer running a bunch of subsystems that are not needed if the node is not a validator. That was considered to be harmless; however, we've got problems with unused subsystems getting stalled for a reason not currently known, resulting in the overseer exiting and bringing down the whole node. This PR aims to only run needed subsystems on such nodes, replacing the rest with `DummySubsystem`. It also enables collator-optimized availability recovery subsystem implementation. Partially solves #1730.
-
- Jan 27, 2024
-
-
Sergej Sakac authored
This PR allows Coretime regions to be transferable via XCM. --------- Co-authored-by:
Dónal Murray <[email protected]>
-
- Jan 26, 2024
-
-
Liam Aharon authored
Related https://github.com/paritytech/polkadot-sdk/issues/3032 --- Using https://github.com/liamaharon/cargo-workspace-version-tools/ `cargo run -- sync --path ../polkadot-sdk` --------- Signed-off-by:
Oliver Tale-Yazdi <[email protected]> Co-authored-by:
Oliver Tale-Yazdi <[email protected]>
-
- Jan 25, 2024
-
-
RadiumBlock authored
We would like to add our RadiumBlock bootnode to collectives-westend parachain
-
- Jan 24, 2024
-
-
Just van Stam authored
Moved from: https://github.com/paritytech/polkadot/pull/6951 closes https://github.com/paritytech/polkadot-sdk/issues/490 - [x] update cumulus --- This PR introduces transactional processing of certain xcm instructions. For the list of instructions checkout https://github.com/paritytech/polkadot-sdk/issues/490. The transactional processing is implemented as an xcm-executor config item. The two implementations in this PR are `FrameTransactionalProcessor` and `()`. The `()` implementation does no transactional processing. Each implementation of the `ProcessTransaction` trait has an `IS_TRANSACTIONAL` const that tells the XCVM if transactional processing is actually implemented. If Transactional processing is implemented, changes to touched registers should also be rolled back to prevent inconsistencies. Note for reviewers: Check out the following safety assumption: https://github.com/paritytech/polkadot-sdk/pull/1222/files#diff-4effad7d8c1c9de19fd27e18661cbf2128c8718f3b2420a27d2f816e0749ea53R30 --------- Co-authored-by:
Keith Yeung <[email protected]> Co-authored-by:
Francisco Aguirre <[email protected]> Co-authored-by: command-bot <>
-
Branislav Kontur authored
This PR avoids automatically pulling rococo/westend runtime constants into the runtime by default. Usually, we have testnet runtimes dedicated to rococo or westend, and therefore, we don't need both dependencies. Additionally, it prevents pulling rococo/westend-related items into the `polkadot-fellows` repo, as seen in the Cargo.lock [here](https://github.com/polkadot-fellows/runtimes/blob/main/Cargo.lock#L14137-L14151) and [here](https://github.com/polkadot-fellows/runtimes/blob/main/Cargo.lock#L9756-L9770 ). --------- Co-authored-by:
Adrian Catangiu <[email protected]>
-
Branislav Kontur authored
## Summary This PR consolidates `pallet-state-trie-migration` as a part of https://github.com/paritytech/polkadot-sdk/issues/226 / https://github.com/paritytech/polkadot-sdk/issues/171: `pallet-state-trie-migration`: - [x] replace `Currency` with `fungible` traits - [x] run benchmarks - [x] refactor to `DefaultConfig` `pallet_nicks`: - [x] remove others: - [x] remove `as Fn*` or `asFun*` stuff based on discussion [here](https://github.com/paritytech/polkadot-sdk/issues/226#issuecomment-1822861445 ) --------- Co-authored-by:
Richard Melkonian <[email protected]> Co-authored-by: command-bot <>
-
- Jan 23, 2024
-
-
Branislav Kontur authored
There were several improvements and PRs that didn't apply to all runtimes, so this PR attempts to align those small differences. In addition, the PR eliminates unused dependencies across multiple modules. Relates to PR for `polkadot-fellows`: https://github.com/polkadot-fellows/runtimes/pull/154
-
joe petrowski authored
-
Niklas Adolfsson authored
This is a rather big change in jsonrpsee, the major things in this bump are: - Server backpressure (the subscription impls are modified to deal with that) - Allow custom error types / return types (remove jsonrpsee::core::Error and jsonrpee::core::CallError) - Bug fixes (graceful shutdown in particular not used by substrate anyway) - Less dependencies for the clients in particular - Return type requires Clone in method call responses - Moved to tokio channels - Async subscription API (not used in this PR) Major changes in this PR: - The subscriptions are now bounded and if subscription can't keep up with the server it is dropped - CLI: add parameter to configure the jsonrpc server bounded message buffer (default is 64) - Add our own subscription helper to deal with the unbounded streams in substrate The most important things in this PR to review is the added helpers functions in `substrate/client/rpc/src/utils.rs` and the rest is pretty much chore. Regarding the "bounded buffer limit" it may cause the server to handle the JSON-RPC calls slower than before. The message size limit is bounded by "--rpc-response-size" thus "by default 10MB * 64 = 640MB" but the subscription message size is not covered by this limit and could be capped as well. Hopefully the last release prior to 1.0, sorry in advance for a big PR Previous attempt: https://github.com/paritytech/substrate/pull/13992 Resolves https://github.com/paritytech/polkadot-sdk/issues/748, resolves https://github.com/paritytech/polkadot-sdk/issues/627
-
- Jan 22, 2024
-
-
Davide Galassi authored
Step towards https://github.com/paritytech/polkadot-sdk/issues/1975 As reported https://github.com/paritytech/polkadot-sdk/issues/1975#issuecomment-1774534225 I'd like to encapsulate crypto related stuff in a dedicated folder. Currently all cryptographic primitive wrappers are all sparsed in `substrate/core` which contains "misc core" stuff. To simplify the process, as the first step with this PR I propose to move the cryptographic hashing there. The `substrate/crypto` folder was already created to contains `ec-utils` crate. Notes: - rename `sp-core-hashing` to `sp-crypto-hashing` - rename `sp-core-hashing-proc-macro` to `sp-crypto-hashing-proc-macro` - As the crates name is changed I took the freedom to restart fresh from version 0.1.0 for both crates --------- Co-authored-by:
Robert Hambrock <[email protected]>
-
Marcin S. authored
The goal is to move all system chains on Rococo (+ other testnets?) to use async backing. Starting with `asset-hub-rococo` to get feedback, before I do the rest. ## Related Example: https://github.com/paritytech/polkadot-sdk/pull/1619/ Guide: https://github.com/w3f/polkadot-wiki/blob/master/docs/maintain/maintain-guides-async-backing.md --------- Co-authored-by:
Branislav Kontur <[email protected]> Co-authored-by:
Dónal Murray <[email protected]>
-
joe petrowski authored
Clean up all the old syntax. --------- Co-authored-by: command-bot <> Co-authored-by:
gupnik <[email protected]> Co-authored-by:
Nikhil Gupta <[email protected]> Co-authored-by:
Maksym H <[email protected]>
-
- Jan 21, 2024
-
-
s0me0ne-unkn0wn authored
This PR aims to channel the backpressure of the PVF host's preparation and execution queues to the candidate validation subsystem consumers. Related: #708
-
- Jan 19, 2024
-
-
Serban Iorga authored
Update bridges subtree
-
Sergej Sakac authored
This PR introduces the following changes: - [x] Adds a `UniquesTransactor` to asset-hub-rococo - [x] Adds a `UniquesTransactor` to asset-hub-westend We can't add a transactor for `pallet-nfts` like we do for `pallet-uniques` because `pallet-nfts` uses `nonfungibles_v2::Mutate` instead of `nonfungibles::Mutate`, and making that work would be out of scope of this PR. With these modifications, reserve-based NFT cross-chain transfers can be performed on asset-hub. --------- Co-authored-by:
joe petrowski <[email protected]>
-
- Jan 18, 2024
-
-
Muharem Ismailov authored
Set up the `TakeFirstAssetTrader` trader for Westend and Rococo Asset Hubs to cover XCM fees with sufficient assets. This PR reintroduces previously [removed](https://github.com/paritytech/polkadot-sdk/pull/1845 ) trader setups, as it was decided to keep both traders, `TakeFirstAssetTrader` and `SwapFirstAssetTrader`, during the transition period. --------- Co-authored-by:
Svyatoslav Nikolsky <[email protected]>
-
dependabot[bot] authored
Bumps the known_good_semver group with 1 update: [clap](https://github.com/clap-rs/clap). Updates `clap` from 4.4.16 to 4.4.18 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/releases">clap's releases</a>.</em></p> <blockquote> <h2>v4.4.18</h2> <h2>[4.4.18] - 2024-01-16</h2> <h3>Fixes</h3> <ul> <li><em>(error)</em> When lacking <code>usage</code> feature, ensure the list of required arguments is unique</li> </ul> <h2>v4.4.17</h2> <h2>[4.4.17] - 2024-01-15</h2> <h3>Fixes</h3> <ul> <li>Fix <code>panic!</code> when mixing <code>args_conflicts_with_subcommands</code> with <code>ArgGroup</code> (which is implicit with <code>derive</code>) introduced in 4.4.15</li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's changelog</a>.</em></p> <blockquote> <h2>[4.4.18] - 2024-01-16</h2> <h3>Fixes</h3> <ul> <li><em>(error)</em> When lacking <code>usage</code> feature, ensure the list of required arguments is unique</li> </ul> <h2>[4.4.17] - 2024-01-15</h2> <h3>Fixes</h3> <ul> <li>Fix <code>panic!</code> when mixing <code>args_conflicts_with_subcommands</code> with <code>ArgGroup</code> (which is implicit with <code>derive</code>) introduced in 4.4.15</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/clap-rs/clap/commit/0134f45ff0e2e2be8c451565e4fbf5d3cb7b7cfd"><code>0134f45</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/995ee032779d802606e599caf4f498ea51e92e82"><code>995ee03</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/2f1890907ed4e78674feeb96df34cfb813b84686"><code>2f18909</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5314">#5314</a> from epage/required</li> <li><a href="https://github.com/clap-rs/clap/commit/0a635b9a20077e2f932a9baee527052d8ed45d9e"><code>0a635b9</code></a> fix(parser): Don't duplicate requireds when usage disabled</li> <li><a href="https://github.com/clap-rs/clap/commit/e648e086f3934afb40b121b5999b9e23657ddc28"><code>e648e08</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5311">#5311</a> from sourcefrog/doc-exitcode</li> <li><a href="https://github.com/clap-rs/clap/commit/8c83971b8c356b8c9abfbbb2320cb946a2ee8139"><code>8c83971</code></a> docs: Link to exit code info</li> <li><a href="https://github.com/clap-rs/clap/commit/b250c0b5f5920b59e551bf0ec90e17c6103ae4a2"><code>b250c0b</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5310">#5310</a> from epage/pty</li> <li><a href="https://github.com/clap-rs/clap/commit/c742b8eb0ca648b645b616e064e00408944f390e"><code>c742b8e</code></a> chore(complete): Update completest-pty</li> <li><a href="https://github.com/clap-rs/clap/commit/f524d84c1d3eca1c980c5150c750d9e00cbbdb0c"><code>f524d84</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/944fb81cf593af1cd3a58dd959c934f0ff483182"><code>944fb81</code></a> docs: Update changelog</li> <li>Additional commits viewable in <a href="https://github.com/clap-rs/clap/compare/v4.4.16...v4.4.18">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=clap&package-manager=cargo&previous-version=4.4.16&new-version=4.4.18)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores ) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by:
dependabot[bot] <[email protected]> Co-authored-by:
dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by:
Bastian Köcher <[email protected]> Co-authored-by:
Dónal Murray <[email protected]>
-
joe petrowski authored
Order: - [x] Start People Chain - [RPC node](https://polkadot.js.org/apps/?rpc=wss%3A%2F%2Frococo-people-rpc.polkadot.io#/explorer) - [x] Upgrade Rococo Relay (`EnsureRoot` -> `EnsureSigned`) (v1,006,002) - Done [here](https://rococo.subscan.io/extrinsic/0xef07e0f9dbb2b9e829305f132e6ce45d291239286e409177e20895e6687daa6c) - [x] Migrate all identities - Done, see extrinsics from [this account](https://rococo.subscan.io/account/5FyNYrBwndvBttTkGUqGGCRAXtBH4Mh8xELDaxaFywTsjDKb) - [x] Upgrade Rococo People (remove call filter) (v1,006,002) - Authorized [here](https://rococo.subscan.io/extrinsic/0xedf6a80229bd411b7ed8d3a489a767b0f773bed5c49239987a294c293a35b98b) With added: - [x] Upgrade Rococo People to fix `poke_deposit` bug (v1,006,001) - Authorized [here](https://rococo.subscan.io/extrinsic/0xd1dc3cd6e8274bd0196f8d9f13ed09f6e9c76e6a40f9786a1629f4cb22cf948d) Note: It's also possible to remove the Identity Migrator pallet from both the Relay Chain and the parachain at this time. I will leave them in for now to preserve the test cases until we run them on Kusama/Polkadot. We will also want a follow up to remove all Identity-related state from the Relay Chain.
-
- Jan 17, 2024
-
-
Egor_P authored
This PR backports version bumps from release branch `release-polkadot-v1.6.0` back to `master` and also moved `prdoc` files related to the release to the appropriate folder
-
Ignacio Palacios authored
After People Rococo deployment, we noticed that `safeXcmVersion` wasn't initialised. I think it is due to `Storage` missing in the pallet's declaration. This PR should fix it.
-
- Jan 16, 2024
-
-
Francisco Aguirre authored
# Note for reviewer Most changes are just syntax changes necessary for the new version. Most important files should be the ones under the `xcm` folder. # Description Added XCMv4. ## Removed `Multi` prefix The following types have been renamed: - MultiLocation -> Location - MultiAsset -> Asset - MultiAssets -> Assets - InteriorMultiLocation -> InteriorLocation - MultiAssetFilter -> AssetFilter - VersionedMultiAsset -> VersionedAsset - WildMultiAsset -> WildAsset - VersionedMultiLocation -> VersionedLocation In order to fix a name conflict, the `Assets` in `xcm-executor` were renamed to `HoldingAssets`, as they represent assets in holding. ## Removed `Abstract` asset id It was not being used anywhere and this simplifies the code. Now assets are just constructed as follows: ```rust let asset: Asset = (AssetId(Location::new(1, Here)), 100u128).into(); ``` No need for specifying `Concrete` anymore. ## Outcome is now a named fields struct Instead of ```rust pub enum Outcome { Complete(Weight), Incomplete(Weight, Error), Error(Error), } ``` we now have ```rust pub enum Outcome { Complete { used: Weight }, Incomplete { used: Weight, error: Error }, Error { error: Error }, } ``` ## Added Reanchorable trait Now both locations and assets implement this trait, making it easier to reanchor both. ## New syntax for building locations and junctions Now junctions are built using the following methods: ```rust let location = Location { parents: 1, interior: [Parachain(1000), PalletInstance(50), GeneralIndex(1984)].into() }; ``` or ```rust let location = Location::new(1, [Parachain(1000), PalletInstance(50), GeneralIndex(1984)]); ``` And they are matched like so: ```rust match location.unpack() { (1, [Parachain(id)]) => ... (0, Here) => ..., (1, [_]) => ..., } ``` This syntax is mandatory in v4, and has been also implemented for v2 and v3 for easier migration. This was needed to make all sizes smaller. # TODO - [x] Scaffold v4 - [x] Port github.com/paritytech/polkadot/pull/7236 - [x] Remove `Multi` prefix - [x] Remove `Abstract` asset id --------- Co-authored-by: command-bot <> Co-authored-by:
Keith Yeung <[email protected]>
-
Dónal Murray authored
Co-authored-by: command-bot <>
-
Muharem Ismailov authored
Implements an XCM executor `WeightTrader`, facilitating fee payments in any asset that can be exchanged for a native asset. A few constraints need to be observed: - `buy_weight` and `refund` operations must be atomic, as another weight trader implementation might be attempted in case of failure. - swap credit must be utilized since there isn’t an account to which an asset of some class can be deposited with a guarantee to meet the existential deposit requirement. Also, operating with credits enhances the efficiency of the weight trader - https://github.com/paritytech/polkadot-sdk/pull/1677 related PRs: - (depends) https://github.com/paritytech/polkadot-sdk/pull/2031 - (depends) https://github.com/paritytech/polkadot-sdk/pull/1677 - (caused) https://github.com/paritytech/polkadot-sdk/pull/1847 - (caused) https://github.com/paritytech/polkadot-sdk/pull/1876 // DONE: impl `OnUnbalanced` for a `fungible/s` credit // DONE: make the trader free from a concept of a native currency and drop few fallible conversions. related issue - https://github.com/paritytech/polkadot-sdk/issues/1842 // DONE: tests --------- Co-authored-by:
joe petrowski <[email protected]> Co-authored-by:
Liam Aharon <[email protected]>
-
Bastian Köcher authored
- Do not disable `std` feature in the integration tests - `contracts-fixtures` test should only check for `riscv` build when the feature is enabled
-
- Jan 15, 2024
-
-
dependabot[bot] authored
Bumps the known_good_semver group with 1 update: [clap](https://github.com/clap-rs/clap). Updates `clap` from 4.4.14 to 4.4.16 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/releases">clap's releases</a>.</em></p> <blockquote> <h2>v4.4.16</h2> <h2>[4.4.16] - 2024-01-12</h2> <h3>Fixes</h3> <ul> <li>Ensure invalid escape sequences in user-defined strings are correctly stripped when terminal doesn't support color</li> </ul> <h2>v4.4.15</h2> <h2>[4.4.15] - 2024-01-11</h2> <h3>Fixes</h3> <ul> <li>Improve error for <code>args_conflicts_with_subcommands</code></li> <li>Ensure we error for <code>args_conflicts_with_subcommands</code> when using subcommand short and long flags</li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's changelog</a>.</em></p> <blockquote> <h2>[4.4.16] - 2024-01-12</h2> <h3>Fixes</h3> <ul> <li>Ensure invalid escape sequences in user-defined strings are correctly stripped when terminal doesn't support color</li> </ul> <h2>[4.4.15] - 2024-01-11</h2> <h3>Fixes</h3> <ul> <li>Improve error for <code>args_conflicts_with_subcommands</code></li> <li>Ensure we error for <code>args_conflicts_with_subcommands</code> when using subcommand short and long flags</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/clap-rs/clap/commit/cbc9c9dd44fc4be25c196213d508b9d2a9c282f3"><code>cbc9c9d</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/4718b89486c7c4236a18411b8449afc2d93f8e3d"><code>4718b89</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/38f805cea0cf50a0f26ed01e4fdf550ca8a555fa"><code>38f805c</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5299">#5299</a> from epage/ansi</li> <li><a href="https://github.com/clap-rs/clap/commit/2a3356a53543531726e851e97639810f3828a89b"><code>2a3356a</code></a> fix: Update anstream</li> <li><a href="https://github.com/clap-rs/clap/commit/12b5c39d467ea147c21f5eb3063fc0bc2538e9b7"><code>12b5c39</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/1c5b63390babdb4f3a8994436da4e7f9239b7d43"><code>1c5b633</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/a5d46410e072b9821f76b21839849c4434a2f8da"><code>a5d4641</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5298">#5298</a> from epage/conflict</li> <li><a href="https://github.com/clap-rs/clap/commit/f529ec398c4262296d5e6eb063b1b52d875d7f03"><code>f529ec3</code></a> fix(parser): Ensure subcommand flags can conflict</li> <li><a href="https://github.com/clap-rs/clap/commit/a7e04a53e4a9e310663a0cdb5bfb0753d84b82bd"><code>a7e04a5</code></a> fix(parser): Improve subcommand conflict error</li> <li><a href="https://github.com/clap-rs/clap/commit/ea00ef3051fd5a993b766062a4e9defc777bf233"><code>ea00ef3</code></a> refactor(error): Allow more conflict sources</li> <li>Additional commits viewable in <a href="https://github.com/clap-rs/clap/compare/v4.4.14...v4.4.16">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=clap&package-manager=cargo&previous-version=4.4.14&new-version=4.4.16)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores ) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by:
dependabot[bot] <[email protected]> Co-authored-by:
dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
-
- Jan 12, 2024
-
-
Svyatoslav Nikolsky authored
Brridges zombienet tests are non-standard - zombienet currently missing multiple relay chains support (see e.g. https://github.com/paritytech/zombienet/pull/796), so we need to go live with two relay networks, their parachains + custom test runner (which e.g. doesn't shutdown net when its tests are finished and instead waits for both networks tests to complete). So we are stuck with native zombienet provider => this PR is an attempt to gather everything in a single docker container and run tests there ~Draft, because it is far from finishing - what I want now is to see how it works on CI~
-
- Jan 11, 2024
-
-
Sebastian Kunert authored
closes #2567 Followup for https://github.com/paritytech/polkadot-sdk/pull/2331 This PR contains multiple internal cleanups: 1. This gets rid of the functionality in `generate_genesis_block` which was only used in one benchmark 2. Fixed `transaction_pool` and `transaction_throughput` benchmarks failing since they require a tokio runtime now. 3. Removed `parachain_id` CLI option from the test parachain 4. Removed `expect` call from `RuntimeResolver`
-
- Jan 10, 2024
-
-
Clara van Staden authored
- updates snowbridge crates to `0.9.0` - updates Cargo.toml files in preparation for publishing to crates.io - adds Kusama and Polkadot Snowbridge runtime config crates - moves runtime tests from the Snowbridge subtree into the bridge hub tests dir --------- Co-authored-by: claravanstaden <Cats 4 life!> Co-authored-by:
Ron <[email protected]>
-
joe petrowski authored
This PR allows _username authorities_ to issue unique usernames that correspond with an account. It also provides two-way lookup, that is from `AccountId` to a single, "primary" `Username` (alongside `Registration`) and multiple unique `Username`s to an `AccountId`. Key features: - Username Authorities added (and removed) via privileged origin. - Authorities have a `suffix` and an `allocation`. They can grant up to `allocation` usernames. Their `suffix` will be appended to the usernames that they issue. A suffix may be up to 7 characters long. - Users can ask an authority to grant them a username. This will take the form `myusername.suffix`. The entire name (including suffix) must be less than or equal to 32 alphanumeric characters. - Users can approve a username for themselves in one of two ways (that is, authorities cannot grant them arbitrarily): - Pre-sign the entire username (including suffix) with a secret key that corresponds to their `AccountId` (for keyed accounts, obviously); or - Accept the username after it has been granted by an authority (it will be queued until accepted) (for non-keyed accounts like pure proxies or multisigs). - The system does not require any funds or deposits. Users without an identity will be given a default one (presumably all fields set to `None`). If they update this info, they will need to place the normal storage deposit. - If a user does not have any username, their first one will be set as `Primary`, and their `AccountId` will map to that one. If they get subsequent usernames, they can choose which one to be their primary via `set_primary_username`. - There are some state cleanup functions to remove expired usernames that have not been accepted and dangling usernames whose owners have called `clear_identity`. TODO: - [x] Add migration to runtimes - [x] Probably do off-chain migration into People Chain genesis - [x] Address a few TODO questions in code (please review) --------- Co-authored-by:
Liam Aharon <[email protected]> Co-authored-by:
Gonçalo Pestana <[email protected]> Co-authored-by:
Oliver Tale-Yazdi <[email protected]> Co-authored-by:
Dónal Murray <[email protected]>
-
dependabot[bot] authored
Bumps [lycheeverse/lychee-action](https://github.com/lycheeverse/lychee-action) from 2ac9f030ccdea0033e2510a23a67da2a2da98492 to fdea7032675810093199f485fe075f057cc37b3e. <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/lycheeverse/lychee-action/commit/fdea7032675810093199f485fe075f057cc37b3e"><code>fdea703</code></a> Update secure git hash for 1.9.0</li> <li><a href="https://github.com/lycheeverse/lychee-action/commit/22134d37a1fff6c2974df9c92a7c7e1e86a08f9c"><code>22134d3</code></a> Bump version to 1.9.0</li> <li><a href="https://github.com/lycheeverse/lychee-action/commit/ebd95ebde89b46eaf3567432efb0b52bad2187d7"><code>ebd95eb</code></a> Update to latest lychee 0.14.0</li> <li><a href="https://github.com/lycheeverse/lychee-action/commit/37d79d3b6eda9990480a57eed21c847792dec37a"><code>37d79d3</code></a> Add integration tests for absolute output path and <code>--dump</code> (<a href="https://redirect.github.com/lycheeverse/lychee-action/issues/218">#218</a>)</li> <li><a href="https://github.com/lycheeverse/lychee-action/commit/57219e4f1d23b32484889db3dbd73f6b814c9bfa"><code>57219e4</code></a> Add integration test for custom output paths (<a href="https://redirect.github.com/lycheeverse/lychee-action/issues/1309">#1309</a>) (<a href="https://redirect.github.com/lycheeverse/lychee-action/issues/217">#217</a>)</li> <li><a href="https://github.com/lycheeverse/lychee-action/commit/a4282891d5805c0d9df0c0d524e2e95a3b0d1ac5"><code>a428289</code></a> fix: cleanup if statement (<a href="https://redirect.github.com/lycheeverse/lychee-action/issues/215">#215</a>)</li> <li><a href="https://github.com/lycheeverse/lychee-action/commit/ef8c8f32c278e9eed290c6e6c96748f16b6cd335"><code>ef8c8f3</code></a> Add documentation on using the <code>--base</code> param when testing local files (<a href="https://redirect.github.com/lycheeverse/lychee-action/issues/211">#211</a>)</li> <li>See full diff in <a href="https://github.com/lycheeverse/lychee-action/compare/2ac9f030ccdea0033e2510a23a67da2a2da98492...fdea7032675810093199f485fe075f057cc37b3e ">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) </details> --------- Signed-off-by:
dependabot[bot] <[email protected]> Signed-off-by:
Oliver Tale-Yazdi <[email protected]> Co-authored-by:
dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by:
Oliver Tale-Yazdi <[email protected]> Co-authored-by:
PG Herveou <[email protected]>
-
- Jan 09, 2024
-
-
dependabot[bot] authored
Bumps the known_good_semver group with 1 update: [clap](https://github.com/clap-rs/clap). Updates `clap` from 4.4.13 to 4.4.14 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/releases">clap's releases</a>.</em></p> <blockquote> <h2>v4.4.14</h2> <h2>[4.4.14] - 2024-01-08</h2> <h3>Documentation</h3> <ul> <li>Fix <code>find</code> cookbook entry to allow repeats of flags/options</li> </ul> <h3>Features</h3> <ul> <li>Allow <code>num_args(0)</code> on options which allows making them emulate being a flag for position-tracking flags</li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's changelog</a>.</em></p> <blockquote> <h2>[4.4.14] - 2024-01-08</h2> <h3>Documentation</h3> <ul> <li>Fix <code>find</code> cookbook entry to allow repeats of flags/options</li> </ul> <h3>Features</h3> <ul> <li>Allow <code>num_args(0)</code> on options which allows making them emulate being a flag for position-tracking flags</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/clap-rs/clap/commit/514f28bc92ed683d53292cbe9457db3ec5df7b6f"><code>514f28b</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/1440456d3ddaa6d9624297d83de9bb9abe82f10b"><code>1440456</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/d6479ff7ddbcf524146428c92be23273b4f8bac5"><code>d6479ff</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5290">#5290</a> from epage/or</li> <li><a href="https://github.com/clap-rs/clap/commit/02f82146ad746ce9d1874e38ec7033150bb12622"><code>02f8214</code></a> docs(cookbook): Clarify intent of fake flags</li> <li><a href="https://github.com/clap-rs/clap/commit/c603f34574832b8894b44e0f67fd19dc7869e808"><code>c603f34</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5275">#5275</a> from epage/ci</li> <li><a href="https://github.com/clap-rs/clap/commit/641b42b2e82086775619bd15854ddb5b80311b49"><code>641b42b</code></a> chore(ci): Speed up critical path of CI</li> <li><a href="https://github.com/clap-rs/clap/commit/3eaf1af052bd5255cc2440dc1cc8f80831a3428b"><code>3eaf1af</code></a> fix(help): Correctly show help for fake flags</li> <li><a href="https://github.com/clap-rs/clap/commit/d63106b9f698df0d2241662ab1459c823890dec4"><code>d63106b</code></a> docs(cookbook): Allow repeated operators</li> <li><a href="https://github.com/clap-rs/clap/commit/148e102ac37bd0e5ca99cfe9c5d57ffc6243cf66"><code>148e102</code></a> fix(builder): Allow custom flag definitions</li> <li><a href="https://github.com/clap-rs/clap/commit/d53d881e339fec64e48990170b542fae4140eaaa"><code>d53d881</code></a> docs(cookbook): Demonstrate bad 'find' behavior</li> <li>See full diff in <a href="https://github.com/clap-rs/clap/compare/v4.4.13...v4.4.14">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=clap&package-manager=cargo&previous-version=4.4.13&new-version=4.4.14)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores ) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by:
dependabot[bot] <[email protected]> Co-authored-by:
dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
-