- Feb 28, 2024
-
-
Oliver Tale-Yazdi authored
This MR is the merge of https://github.com/paritytech/substrate/pull/14414 and https://github.com/paritytech/substrate/pull/14275. It implements [RFC#13](https://github.com/polkadot-fellows/RFCs/pull/13), closes https://github.com/paritytech/polkadot-sdk/issues/198. ----- This Merge request introduces three major topicals: 1. Multi-Block-Migrations 1. New pallet `poll` hook for periodic service work 1. Replacement hooks for `on_initialize` and `on_finalize` in cases where `poll` cannot be used and some more general changes to FRAME. The changes for each topical span over multiple crates. They are listed in topical order below. # 1.) Multi-Block-Migrations Multi-Block-Migrations are facilitated by creating `pallet_migrations` and configuring `System::Config::MultiBlockMigrator` to point to it. Executive picks this up and triggers one step of the migrations pallet per block. The chain is in lockdown mode for as long as an MBM is ongoing. Executive does this by polling `MultiBlockMigrator::ongoing` and not allowing any transaction in a block, if true. A MBM is defined through trait `SteppedMigration`. A condensed version looks like this: ```rust /// A migration that can proceed in multiple steps. pub trait SteppedMigration { type Cursor: FullCodec + MaxEncodedLen; type Identifier: FullCodec + MaxEncodedLen; fn id() -> Self::Identifier; fn max_steps() -> Option<u32>; fn step( cursor: Option<Self::Cursor>, meter: &mut WeightMeter, ) -> Result<Option<Self::Cursor>, SteppedMigrationError>; } ``` `pallet_migrations` can be configured with an aggregated tuple of these migrations. It then starts to migrate them one-by-one on the next runtime upgrade. Two things are important here: - 1. Doing another runtime upgrade while MBMs are ongoing is not a good idea and can lead to messed up state. - 2. **Pallet Migrations MUST BE CONFIGURED IN `System::Config`, otherwise it is not used.** The pallet supports an `UpgradeStatusHandler` that can be used to notify external logic of upgrade start/finish (for example to pause XCM dispatch). Error recovery is very limited in the case that a migration errors or times out (exceeds its `max_steps`). Currently the runtime dev can decide in `FailedMigrationHandler::failed` how to handle this. One follow-up would be to pair this with the `SafeMode` pallet and enact safe mode when an upgrade fails, to allow governance to rescue the chain. This is currently not possible, since governance is not `Mandatory`. ## Runtime API - `Core`: `initialize_block` now returns `ExtrinsicInclusionMode` to inform the Block Author whether they can push transactions. ### Integration Add it to your runtime implementation of `Core` and `BlockBuilder`: ```patch diff --git a/runtime/src/lib.rs b/runtime/src/lib.rs @@ impl_runtime_apis! { impl sp_block_builder::Core<Block> for Runtime { - fn initialize_block(header: &<Block as BlockT>::Header) { + fn initialize_block(header: &<Block as BlockT>::Header) -> RuntimeExecutiveMode { Executive::initialize_block(header) } ... } ``` # 2.) `poll` hook A new pallet hook is introduced: `poll`. `Poll` is intended to replace mostly all usage of `on_initialize`. The reason for this is that any code that can be called from `on_initialize` cannot be migrated through an MBM. Currently there is no way to statically check this; the implication is to use `on_initialize` as rarely as possible. Failing to do so can result in broken storage invariants. The implementation of the poll hook depends on the `Runtime API` changes that are explained above. # 3.) Hard-Deadline callbacks Three new callbacks are introduced and configured on `System::Config`: `PreInherents`, `PostInherents` and `PostTransactions`. These hooks are meant as replacement for `on_initialize` and `on_finalize` in cases where the code that runs cannot be moved to `poll`. The reason for this is to make the usage of HD-code (hard deadline) more explicit - again to prevent broken invariants by MBMs. # 4.) FRAME (general changes) ## `frame_system` pallet A new memorize storage item `InherentsApplied` is added. It is used by executive to track whether inherents have already been applied. Executive and can then execute the MBMs directly between inherents and transactions. The `Config` gets five new items: - `SingleBlockMigrations` this is the new way of configuring migrations that run in a single block. Previously they were defined as last generic argument of `Executive`. This shift is brings all central configuration about migrations closer into view of the developer (migrations that are configured in `Executive` will still work for now but is deprecated). - `MultiBlockMigrator` this can be configured to an engine that drives MBMs. One example would be the `pallet_migrations`. Note that this is only the engine; the exact MBMs are injected into the engine. - `PreInherents` a callback that executes after `on_initialize` but before inherents. - `PostInherents` a callback that executes after all inherents ran (including MBMs and `poll`). - `PostTransactions` in symmetry to `PreInherents`, this one is called before `on_finalize` but after all transactions. A sane default is to set all of these to `()`. Example diff suitable for any chain: ```patch @@ impl frame_system::Config for Test { type MaxConsumers = ConstU32<16>; + type SingleBlockMigrations = (); + type MultiBlockMigrator = (); + type PreInherents = (); + type PostInherents = (); + type PostTransactions = (); } ``` An overview of how the block execution now looks like is here. The same graph is also in the rust doc. <details><summary>Block Execution Flow</summary> <p> ![Screenshot 2023-12-04 at 19 11 29](https://github.com/paritytech/polkadot-sdk/assets/10380170/e88a80c4-ef11-4faa-8df5-8b33a724c054) </p> </details> ## Inherent Order Moved to https://github.com/paritytech/polkadot-sdk/pull/2154 --------------- ## TODO - [ ] Check that `try-runtime` still works - [ ] Ensure backwards compatibility with old Runtime APIs - [x] Consume weight correctly - [x] Cleanup --------- Signed-off-by:
Oliver Tale-Yazdi <[email protected]> Co-authored-by:
Liam Aharon <[email protected]> Co-authored-by:
Juan Girini <[email protected]> Co-authored-by: command-bot <> Co-authored-by:
Francisco Aguirre <[email protected]> Co-authored-by:
Gavin Wood <[email protected]> Co-authored-by:
Bastian Köcher <[email protected]>
-
Liam Aharon authored
Closes https://github.com/paritytech/polkadot-sdk-docs/issues/55 - Changes 'current storage version' terminology to less ambiguous 'in-code storage version' (suggestion by @ggwpez) - Adds a new example pallet `pallet-example-single-block-migrations` - Adds a new reference doc to replace https://docs.substrate.io/maintain/runtime-upgrades/ (temporarily living in the pallet while we wait for developer hub PR to merge) - Adds documentation for the `storage_alias` macro - Improves `trait Hooks` docs - Improves `trait GetStorageVersion` docs - Update the suggested patterns for using `VersionedMigration`, so that version unchecked migrations are never exported - Prevents accidental usage of version unchecked migrations in runtimes https://github.com/paritytech/substrate/pull/14421#discussion_r1255467895 - Unversioned migration code is kept inside `mod version_unchecked`, versioned code is kept in `pub mod versioned` - It is necessary to use modules to limit visibility because the inner migration must be `pub`. See https://github.com/rust-lang/rust/issues/30905 and https://internals.rust-lang.org/t/lang-team-minutes-private-in-public-rules/4504/40 for more. ### todo - [x] move to reference docs to proper place within sdk-docs (now that https://github.com/paritytech/polkadot-sdk/pull/2102 is merged) - [x] prdoc --------- Co-authored-by:
Kian Paimani <[email protected]> Co-authored-by:
Juan <[email protected]> Co-authored-by:
Oliver Tale-Yazdi <[email protected]> Co-authored-by: command-bot <> Co-authored-by:
gupnik <[email protected]>
-
- Feb 26, 2024
-
-
Branislav Kontur authored
## Problem During the bumping of the `polkadot-fellows` repository to `[email protected]`, I encountered a situation where the benchmarks `teleport_assets` and `reserve_transfer_assets` in AssetHubKusama started to fail. This issue arose due to a decreased ED balance for AssetHubs introduced [here](https://github.com/polkadot-fellows/runtimes/pull/158/files#diff-80668ff8e793b64f36a9a3ec512df5cbca4ad448c157a5d81abda1b15f35f1daR213), and also because of a [missing CI pipeline](https://github.com/polkadot-fellows/runtimes/issues/197) to check the benchmarks, which went unnoticed. These benchmarks expect the `caller` to have enough: 1. balance to transfer (BTT) 2. balance for paying delivery (BFPD). So the initial balance was calculated as `ED * 100`, which seems reasonable: ``` const ED_MULTIPLIER: u32 = 100; let balance = existential_deposit.saturating_mul(ED_MULTIPLIER.into());` ``` The problem arises when the price for delivery is 100 times higher than the existential deposit. In other words, when `ED * 100` does not cover `BTT` + `BFPD`. I check AHR/AHW/AHK/AHP and this problem has only AssetHubKusama ``` ED: 3333333 calculated price to parent delivery: 1031666634 (from xcm logs from the benchmark) --- 3333333 * 100 - BTT(3333333) - BFPD(1031666634) = −701666667 ``` which results in the error; ``` 2024-02-23 09:19:42 Unable to charge fee with error Module(ModuleError { index: 31, error: [17, 0, 0, 0], message: Some("FeesNotMet") }) Error: Input("Benchmark pallet_xcm::reserve_transfer_assets failed: FeesNotMet") ``` ## Solution The benchmarks `teleport_assets` and `reserve_transfer_assets` were fixed by removing `ED * 100` and replacing it with `DeliveryHelper` logic, which calculates the (almost real) price for delivery and sets it along with the existential deposit as the initial balance for the account used in the benchmark. ## TODO - [ ] patch for 1.6 - https://github.com/paritytech/polkadot-sdk/pull/3466 - [ ] patch for 1.7 - https://github.com/paritytech/polkadot-sdk/pull/3465 - [ ] patch for 1.8 - TODO: PR --------- Co-authored-by:
Francisco Aguirre <[email protected]>
-
- Feb 20, 2024
-
-
Branislav Kontur authored
-
Oliver Tale-Yazdi authored
Lifting some more dependencies to the workspace. Just using the most-often updated ones for now. It can be reproduced locally. ```sh # First you can check if there would be semver incompatible bumps (looks good in this case): $ zepter transpose dependency lift-to-workspace --ignore-errors syn quote thiserror "regex:^serde.*" # Then apply the changes: $ zepter transpose dependency lift-to-workspace --version-resolver=highest syn quote thiserror "regex:^serde.*" --fix # And format the changes: $ taplo format --config .config/taplo.toml ``` --------- Signed-off-by:
Oliver Tale-Yazdi <[email protected]>
-
- Feb 16, 2024
-
-
Branislav Kontur authored
-
dependabot[bot] authored
Bumps the known_good_semver group with 6 updates: | Package | From | To | | --- | --- | --- | | [serde](https://github.com/serde-rs/serde) | `1.0.195` | `1.0.196` | | [serde_json](https://github.com/serde-rs/json) | `1.0.111` | `1.0.113` | | [clap](https://github.com/clap-rs/clap) | `4.4.18` | `4.5.0` | | [syn](https://github.com/dtolnay/syn) | `2.0.48` | `2.0.49` | | [serde_yaml](https://github.com/dtolnay/serde-yaml) | `0.9.30` | `0.9.31` | | [serde_derive](https://github.com/serde-rs/serde) | `1.0.195` | `1.0.196` | Updates `serde` from 1.0.195 to 1.0.196 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/serde/releases">serde's releases</a>.</em></p> <blockquote> <h2>v1.0.196</h2> <ul> <li>Improve formatting of "invalid type" error messages involving floats (<a href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/serde/commit/ede9762a583c3cc3b87c10a53551828fad339525"><code>ede9762</code></a> Release 1.0.196</li> <li><a href="https://github.com/serde-rs/serde/commit/d438c2d67bf30e3edab31c2272c4829c12cf4cb5"><code>d438c2d</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a> from dtolnay/decimalpoint</li> <li><a href="https://github.com/serde-rs/serde/commit/bef110b92a171ac568a47339f5bd97938a8c9da2"><code>bef110b</code></a> Format Unexpected::Float with decimal point</li> <li><a href="https://github.com/serde-rs/serde/commit/b971ef11d1b53da7673e0c8199e87509c003c1a8"><code>b971ef1</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2681">#2681</a> from dtolnay/workspacedeps</li> <li><a href="https://github.com/serde-rs/serde/commit/29d9f693996d199748136d5561a971ed68626724"><code>29d9f69</code></a> Fix workspace.dependencies default-features future compat warning</li> <li><a href="https://github.com/serde-rs/serde/commit/aecb4083bde754155752f5d7d442b64eb7dc636f"><code>aecb408</code></a> Sort workspace dependencies</li> <li><a href="https://github.com/serde-rs/serde/commit/1c675ab3a38e46df4e62465800970f8b20a2055d"><code>1c675ab</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2678">#2678</a> from rodoufu/workspaceDependencies</li> <li><a href="https://github.com/serde-rs/serde/commit/dd619630a337139424725697ccd9a9f7596a2d3a"><code>dd61963</code></a> Adding workspace dependencies</li> <li><a href="https://github.com/serde-rs/serde/commit/111803ab0768d010c606f2fc0d0add12750d5eef"><code>111803a</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2673">#2673</a> from Sky9x/msrv-badge</li> <li><a href="https://github.com/serde-rs/serde/commit/0024f74f34fbbdc44a7b22457faebe36c5cbe7f8"><code>0024f74</code></a> Use shields.io's MSRV badges</li> <li>See full diff in <a href="https://github.com/serde-rs/serde/compare/v1.0.195...v1.0.196">compare view</a></li> </ul> </details> <br /> Updates `serde_json` from 1.0.111 to 1.0.113 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/json/releases">serde_json's releases</a>.</em></p> <blockquote> <h2>v1.0.113</h2> <ul> <li>Add <code>swap_remove</code> and <code>shift_remove</code> methods on Map (<a href="https://redirect.github.com/serde-rs/json/issues/1109">#1109</a>)</li> </ul> <h2>v1.0.112</h2> <ul> <li>Improve formatting of "invalid type" error messages involving floats (<a href="https://redirect.github.com/serde-rs/json/issues/1107">#1107</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/json/commit/09d865b34b9701be52764dc9bf571b1a16e9d3dc"><code>09d865b</code></a> Release 1.0.113</li> <li><a href="https://github.com/serde-rs/json/commit/5aeab4eaf69d7959f013f8081865c264d6c00551"><code>5aeab4e</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/json/issues/1109">#1109</a> from serde-rs/remove</li> <li><a href="https://github.com/serde-rs/json/commit/ca3c2ca3696cab79b8b279be7569ee1647250f1e"><code>ca3c2ca</code></a> Add swap_remove and shift_remove methods on Map</li> <li><a href="https://github.com/serde-rs/json/commit/7fece969e3b480ec620419d65c2aeb08776bebcb"><code>7fece96</code></a> Release 1.0.112</li> <li><a href="https://github.com/serde-rs/json/commit/6a6d2bbd9e8b8bd72573b863f12a4ec991f33232"><code>6a6d2bb</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/json/issues/1107">#1107</a> from serde-rs/unexpectedfloat</li> <li><a href="https://github.com/serde-rs/json/commit/83d7bad54ba5db3a44198d6df0ff2e81621683fa"><code>83d7bad</code></a> Format f64 in error messages using ryu</li> <li><a href="https://github.com/serde-rs/json/commit/107c2d1c42817f0d71f07a4d5b0ea2f29dbce8b8"><code>107c2d1</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/json/issues/1106">#1106</a> from serde-rs/invalidvalue</li> <li><a href="https://github.com/serde-rs/json/commit/62ca3e4c01c2e62cd5c2a32e9104f386e5ce7808"><code>62ca3e4</code></a> Handle Unexpected::Unit in Error::invalid_value</li> <li><a href="https://github.com/serde-rs/json/commit/296fafb8f32e8442ef8e4d5725c15ffca726b288"><code>296fafb</code></a> Factor out JSON-specific Display impl for serde::de::Unexpected</li> <li><a href="https://github.com/serde-rs/json/commit/e56cc696bd7c112e5dd4ccfa23d094c3a1c1c1ff"><code>e56cc69</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/json/issues/1105">#1105</a> from keienWang/master</li> <li>Additional commits viewable in <a href="https://github.com/serde-rs/json/compare/v1.0.111...v1.0.113">compare view</a></li> </ul> </details> <br /> Updates `clap` from 4.4.18 to 4.5.0 <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's changelog</a>.</em></p> <blockquote> <h2>[4.5.0] - 2024-02-08</h2> <h3>Compatibility</h3> <ul> <li>Update MSRV to 1.74</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/clap-rs/clap/commit/a751c5fe65cd33cb09e85ff3039b4fd0182cdb6e"><code>a751c5f</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/9ec6c942b81c370a8c14652e42295933244555ac"><code>9ec6c94</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/0735119775c2d27fef6b3c232cb9ef2fcbbd963f"><code>0735119</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/c4d3959506f5068f86ffb7ab34b622bd2da40dd8"><code>c4d3959</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5344">#5344</a> from epage/encode</li> <li><a href="https://github.com/clap-rs/clap/commit/f750e577789e1dd34c6950d8c8fe16d1bfd1f49c"><code>f750e57</code></a> fix(lex): Use new-ish OsStr API</li> <li><a href="https://github.com/clap-rs/clap/commit/1d9a554cdfddffcb92d197706b9720e2760cb443"><code>1d9a554</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5343">#5343</a> from epage/msrv</li> <li><a href="https://github.com/clap-rs/clap/commit/4b45d361b1b96eb1f37b7d1db2684203ca828a94"><code>4b45d36</code></a> chore: Update MSRV to 1.74</li> <li><a href="https://github.com/clap-rs/clap/commit/55b1f945157d4d0e480dea6c492e04d0b541088a"><code>55b1f94</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5342">#5342</a> from epage/divan</li> <li><a href="https://github.com/clap-rs/clap/commit/ea77b98da3f321069ae136a241a2d266c2b28bd7"><code>ea77b98</code></a> test(complete): Make it order independent</li> <li><a href="https://github.com/clap-rs/clap/commit/b0fea2bac60819bdb042e10c032817fded67f815"><code>b0fea2b</code></a> test(bench): Switch to divan</li> <li>Additional commits viewable in <a href="https://github.com/clap-rs/clap/compare/v4.4.18...clap_complete-v4.5.0">compare view</a></li> </ul> </details> <br /> Updates `syn` from 2.0.48 to 2.0.49 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/dtolnay/syn/releases">syn's releases</a>.</em></p> <blockquote> <h2>2.0.49</h2> <ul> <li>Improve error location when parsing from an empty string literal using <code>LitStr::parse</code> (<a href="https://redirect.github.com/dtolnay/syn/issues/1590">#1590</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/dtolnay/syn/commit/e64c0636042bcd8cf56f9e6c3e828a49cb434649"><code>e64c063</code></a> Release 2.0.49</li> <li><a href="https://github.com/dtolnay/syn/commit/981359c5f46f25f3db42d1b341cc607f634688e7"><code>981359c</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/syn/issues/1590">#1590</a> from dtolnay/streof</li> <li><a href="https://github.com/dtolnay/syn/commit/51298d40a447b9e5b3cd8c898c2ea9d24b31cd6d"><code>51298d4</code></a> Improve error location at eof in LitStr::parse</li> <li><a href="https://github.com/dtolnay/syn/commit/270c63384a9d891f65880a03a5a92f0bf4605bbf"><code>270c633</code></a> Update test suite to nightly-2024-02-13</li> <li><a href="https://github.com/dtolnay/syn/commit/dc9cf16b9b0601d2d393d059c46a8f8e0220cc21"><code>dc9cf16</code></a> Remove FilterAttrs trait when unused</li> <li><a href="https://github.com/dtolnay/syn/commit/7dcfac79eda716fa806d68cc0aa811f3be717dc0"><code>7dcfac7</code></a> Ignore dead_code warning in test</li> <li><a href="https://github.com/dtolnay/syn/commit/98318441089f9a9bb596fc010ed14c3b593d4bda"><code>9831844</code></a> Update signature of Emitter::emit_diagnostic in nightly-2024-02-07</li> <li><a href="https://github.com/dtolnay/syn/commit/9e8033f63da93dfb6a3e698449c6edff5e56727d"><code>9e8033f</code></a> Update test suite to nightly-2024-02-07</li> <li><a href="https://github.com/dtolnay/syn/commit/cb3348cd94be50995054796facdfa055b6e0e9e8"><code>cb3348c</code></a> Update test suite to nightly-2024-01-23</li> <li><a href="https://github.com/dtolnay/syn/commit/15b9dbcd67bc56f3da7d33bbede46f7380fc7164"><code>15b9dbc</code></a> Update test suite to nightly-2024-01-19</li> <li>Additional commits viewable in <a href="https://github.com/dtolnay/syn/compare/2.0.48...2.0.49">compare view</a></li> </ul> </details> <br /> Updates `serde_yaml` from 0.9.30 to 0.9.31 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/dtolnay/serde-yaml/releases">serde_yaml's releases</a>.</em></p> <blockquote> <h2>0.9.31</h2> <ul> <li>Add <code>swap_remove</code> and <code>shift_remove</code> methods on Mapping (<a href="https://redirect.github.com/dtolnay/serde-yaml/issues/408">#408</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/dtolnay/serde-yaml/commit/2a77483b23897115bdd69af32ae34d593268d555"><code>2a77483</code></a> Release 0.9.31</li> <li><a href="https://github.com/dtolnay/serde-yaml/commit/d8d1a839cf42ef4627c66bebd743f5fecd24e3ed"><code>d8d1a83</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/serde-yaml/issues/408">#408</a> from dtolnay/remove</li> <li><a href="https://github.com/dtolnay/serde-yaml/commit/f8a99a496836ccfa6c547af9136986d13011be98"><code>f8a99a4</code></a> Add swap_remove and shift_remove methods on Mapping</li> <li><a href="https://github.com/dtolnay/serde-yaml/commit/8b26413e3307e39329dc68a96b065058aec38f9a"><code>8b26413</code></a> Work around dead_code warning in tests</li> <li>See full diff in <a href="https://github.com/dtolnay/serde-yaml/compare/0.9.30...0.9.31">compare view</a></li> </ul> </details> <br /> Updates `serde_derive` from 1.0.195 to 1.0.196 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/serde/releases">serde_derive's releases</a>.</em></p> <blockquote> <h2>v1.0.196</h2> <ul> <li>Improve formatting of "invalid type" error messages involving floats (<a href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/serde/commit/ede9762a583c3cc3b87c10a53551828fad339525"><code>ede9762</code></a> Release 1.0.196</li> <li><a href="https://github.com/serde-rs/serde/commit/d438c2d67bf30e3edab31c2272c4829c12cf4cb5"><code>d438c2d</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a> from dtolnay/decimalpoint</li> <li><a href="https://github.com/serde-rs/serde/commit/bef110b92a171ac568a47339f5bd97938a8c9da2"><code>bef110b</code></a> Format Unexpected::Float with decimal point</li> <li><a href="https://github.com/serde-rs/serde/commit/b971ef11d1b53da7673e0c8199e87509c003c1a8"><code>b971ef1</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2681">#2681</a> from dtolnay/workspacedeps</li> <li><a href="https://github.com/serde-rs/serde/commit/29d9f693996d199748136d5561a971ed68626724"><code>29d9f69</code></a> Fix workspace.dependencies default-features future compat warning</li> <li><a href="https://github.com/serde-rs/serde/commit/aecb4083bde754155752f5d7d442b64eb7dc636f"><code>aecb408</code></a> Sort workspace dependencies</li> <li><a href="https://github.com/serde-rs/serde/commit/1c675ab3a38e46df4e62465800970f8b20a2055d"><code>1c675ab</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2678">#2678</a> from rodoufu/workspaceDependencies</li> <li><a href="https://github.com/serde-rs/serde/commit/dd619630a337139424725697ccd9a9f7596a2d3a"><code>dd61963</code></a> Adding workspace dependencies</li> <li><a href="https://github.com/serde-rs/serde/commit/111803ab0768d010c606f2fc0d0add12750d5eef"><code>111803a</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2673">#2673</a> from Sky9x/msrv-badge</li> <li><a href="https://github.com/serde-rs/serde/commit/0024f74f34fbbdc44a7b22457faebe36c5cbe7f8"><code>0024f74</code></a> Use shields.io's MSRV badges</li> <li>See full diff in <a href="https://github.com/serde-rs/serde/compare/v1.0.195...v1.0.196 ">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by:
dependabot[bot] <[email protected]> Co-authored-by:
dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
-
- Feb 13, 2024
-
-
Branislav Kontur authored
I found out during the cleanup of this deprecation message in the `polkadot-fellows` repository that we deprecated `CurrencyAdapter` without making the recommended changes. ## TODO - [ ] fix `polkadot-fellows` bump to 1.6.0 https://github.com/polkadot-fellows/runtimes/pull/159 --------- Co-authored-by:
Francisco Aguirre <[email protected]>
-
- Feb 12, 2024
-
-
Oliver Tale-Yazdi authored
Changes (partial https://github.com/paritytech/polkadot-sdk/issues/994): - Set log to `0.4.20` everywhere - Lift `log` to the workspace Starting with a simpler one after seeing https://github.com/paritytech/polkadot-sdk/pull/2065 from @jsdw . This sets the `default-features` to `false` in the root and then overwrites that in each create to its original value. This is necessary since otherwise the `default` features are additive and its impossible to disable them in the crate again once they are enabled in the workspace. I am using a tool to do this, so its mostly a test to see that it works as expected. --------- Signed-off-by:
Oliver Tale-Yazdi <[email protected]>
-
- Feb 09, 2024
-
-
Egor_P authored
This PR backports version bumps from `1.7.0` release branch and moves related prdoc files to the appropriate folder.
-
- Feb 06, 2024
-
-
Branislav Kontur authored
Relates to: https://github.com/paritytech/polkadot-sdk/issues/3214 ## TODO - [ ] backport to the `1.7.0` release
-
- Feb 02, 2024
-
-
Marcin S. authored
Built on top of https://github.com/paritytech/polkadot-sdk/pull/2826/ which was a trial run. Guide: https://github.com/w3f/polkadot-wiki/blob/master/docs/maintain/maintain-guides-async-backing.md --------- Signed-off-by:
georgepisaltu <[email protected]> Co-authored-by:
Branislav Kontur <[email protected]> Co-authored-by:
Dónal Murray <[email protected]> Co-authored-by:
Dmitry Sinyavin <[email protected]> Co-authored-by:
s0me0ne-unkn0wn <[email protected]> Co-authored-by:
Svyatoslav Nikolsky <[email protected]> Co-authored-by:
Bastian Köcher <[email protected]> Co-authored-by:
georgepisaltu <[email protected]>
-
Branislav Kontur authored
## TODO - [x] change constants when CI fails (should fail :) ) ## Result On the AssetHubRococo: 1701175800126 -> 1700929825257 = 0.15 % decreased. ``` # Before ( [xcm] Fix `SovereignPaidRemoteExporter` and `DepositAsset` handling (#3157)) Feb 02 12:59:05.520 ERROR bridges::estimate: `bridging::XcmBridgeHubRouterBaseFee` actual value: 1701175800126 for runtime: statemine-1006000 (statemine-0.tx14.au1) # After Feb 02 13:02:40.647 ERROR bridges::estimate: `bridging::XcmBridgeHubRouterBaseFee` actual value: 1700929825257 for runtime: statemine-1006000 (statemine-0.tx14.au1) ``` On the AssetHubWestend: 2116038876326 -> 1641718372993 = 22.4 % decreased. ``` # Before ( [xcm] Fix `SovereignPaidRemoteExporter` and `DepositAsset` handling (#3157)) Feb 02 12:56:00.880 ERROR bridges::estimate: `bridging::XcmBridgeHubRouterBaseFee` actual value: 2116038876326 for runtime: westmint-1006000 (westmint-0.tx14.au1) # After Feb 02 13:04:42.515 ERROR bridges::estimate: `bridging::XcmBridgeHubRouterBaseFee` actual value: 1641718372993 for runtime: westmint-1006000 (westmint-0.tx14.au1) ```
-
- Jan 31, 2024
-
-
Branislav Kontur authored
[frame] `#[pallet::composite_enum]` improved variant count handling + removed `pallet_balances`'s `MaxHolds` config (#2657) I started this investigation/issue based on @liamaharon question [here](https://github.com/paritytech/polkadot-sdk/pull/1801#discussion_r1410452499). ## Problem The `pallet_balances` integrity test should correctly detect that the runtime has correct distinct `HoldReasons` variant count. I assume the same situation exists for RuntimeFreezeReason. It is not a critical problem, if we set `MaxHolds` with a sufficiently large value, everything should be ok. However, in this case, the integrity_test check becomes less useful. **Situation for "any" runtime:** - `HoldReason` enums from different pallets: ```rust /// from pallet_nis #[pallet::composite_enum] pub enum HoldReason { NftReceipt, } /// from pallet_preimage #[pallet::composite_enum] pub enum HoldReason { Preimage, } // from pallet_state-trie-migration #[pallet::composite_enum] pub enum HoldReason { SlashForContinueMigrate, SlashForMigrateCustomTop, SlashForMigrateCustomChild, } ``` - generated `RuntimeHoldReason` enum looks like: ```rust pub enum RuntimeHoldReason { #[codec(index = 32u8)] Preimage(pallet_preimage::HoldReason), #[codec(index = 38u8)] Nis(pallet_nis::HoldReason), #[codec(index = 42u8)] StateTrieMigration(pallet_state_trie_migration::HoldReason), } ``` - composite enum `RuntimeHoldReason` variant count is detected as `3` - we set `type MaxHolds = ConstU32<3>` - `pallet_balances::integrity_test` is ok with `3`(at least 3) However, the real problem can occur in a live runtime where some functionality might stop working. This is due to a total of 5 distinct hold reasons (for pallets with multi-instance support, it is even more), and not all of them can be used because of an incorrect `MaxHolds`, which is deemed acceptable according to the `integrity_test`: ``` // pseudo-code - if we try to call all of these: T::Currency::hold(&pallet_nis::HoldReason::NftReceipt.into(), &nft_owner, deposit)?; T::Currency::hold(&pallet_preimage::HoldReason::Preimage.into(), &nft_owner, deposit)?; T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForContinueMigrate.into(), &nft_owner, deposit)?; // With `type MaxHolds = ConstU32<3>` these two will fail T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomTop.into(), &nft_owner, deposit)?; T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomChild.into(), &nft_owner, deposit)?; ``` ## Solutions A macro `#[pallet::*]` expansion is extended of `VariantCount` implementation for the `#[pallet::composite_enum]` enum type. This expansion generates the `VariantCount` implementation for pallets' `HoldReason`, `FreezeReason`, `LockId`, and `SlashReason`. Enum variants must be plain enum values without fields to ensure a deterministic count. The composite runtime enum, `RuntimeHoldReason` and `RuntimeFreezeReason`, now sets `VariantCount::VARIANT_COUNT` as the sum of pallets' enum `VariantCount::VARIANT_COUNT`: ```rust #[frame_support::pallet(dev_mode)] mod module_single_instance { #[pallet::composite_enum] pub enum HoldReason { ModuleSingleInstanceReason1, ModuleSingleInstanceReason2, } ... } #[frame_support::pallet(dev_mode)] mod module_multi_instance { #[pallet::composite_enum] pub enum HoldReason<I: 'static = ()> { ModuleMultiInstanceReason1, ModuleMultiInstanceReason2, ModuleMultiInstanceReason3, } ... } impl self::sp_api_hidden_includes_construct_runtime::hidden_include::traits::VariantCount for RuntimeHoldReason { const VARIANT_COUNT: u32 = 0 + module_single_instance::HoldReason::VARIANT_COUNT + module_multi_instance::HoldReason::<module_multi_instance::Instance1>::VARIANT_COUNT + module_multi_instance::HoldReason::<module_multi_instance::Instance2>::VARIANT_COUNT + module_multi_instance::HoldReason::<module_multi_instance::Instance3>::VARIANT_COUNT; } ``` In addition, `MaxHolds` is removed (as suggested [here](https://github.com/paritytech/polkadot-sdk/pull/2657#discussion_r1443324573)) from `pallet_balances`, and its `Holds` are now bounded to `RuntimeHoldReason::VARIANT_COUNT`. Therefore, there is no need to let the runtime specify `MaxHolds`. ## For reviewers Relevant changes can be found here: - `substrate/frame/support/procedural/src/lib.rs` - `substrate/frame/support/procedural/src/pallet/parse/composite.rs` - `substrate/frame/support/procedural/src/pallet/expand/composite.rs` - `substrate/frame/support/procedural/src/construct_runtime/expand/composite_helper.rs` - `substrate/frame/support/procedural/src/construct_runtime/expand/hold_reason.rs` - `substrate/frame/support/procedural/src/construct_runtime/expand/freeze_reason.rs` - `substrate/frame/support/src/traits/misc.rs` And the rest of the files is just about removed `MaxHolds` from `pallet_balances` ## Next steps Do the same for `MaxFreezes` https://github.com/paritytech/polkadot-sdk/issues/2997 . --------- Co-authored-by: command-bot <> Co-authored-by:
Bastian Köcher <[email protected]> Co-authored-by:
Dónal Murray <[email protected]> Co-authored-by:
gupnik <[email protected]>
-
Branislav Kontur authored
The `parachains-common` contains a lots of constants and type definitions which are used for `polkadot-sdk`'s testnet runtimes and also for `polkadot-fellows`'s production [SP runtimes](https://github.com/polkadot-fellows/runtimes/tree/main/system-parachains/constants). This PR cleans `parachains-common` module to contain only common and generic functionality. Testnet-specific constants have been moved to the separate module dedicated just for testnets: `polkadot-sdk/cumulus/parachains/runtimes/constants/` Part of: https://github.com/paritytech/polkadot-sdk/issues/3054 --------- Co-authored-by:
georgepisaltu <[email protected]>
-
- Jan 30, 2024
-
-
Oliver Tale-Yazdi authored
Add `Balances::force_adjust_total_issuance` as preparation for fixing https://github.com/polkadot-fellows/runtimes/issues/147 . Important changes in `substrate/frame/balances/src/lib.rs`. TODO: - [x] Update weights --------- Signed-off-by:
Oliver Tale-Yazdi <[email protected]> Co-authored-by: command-bot <> Co-authored-by:
Bastian Köcher <[email protected]>
-
Oliver Tale-Yazdi authored
Reverts paritytech/polkadot-sdk#2302.
🤦 ♂️ should have checked the migration CI first. We either need to reduce the `max_message_size` for the open HRMP channels on the failing chains or increase the `PageSize` of the XCMP queue. Both would be fine on a test-net, but i assume this will also fail before the next SP runtime upgrade so first need to think what best to do. AFAIK its not possible currently to change the `max_message_size` of an open HRMP channel.
-
- Jan 29, 2024
-
-
Oliver Tale-Yazdi authored
Remove `without_storage_info` from the XCMP queue pallet. Part of https://github.com/paritytech/polkadot-sdk/issues/323 Changes: - Limit the number of channels that can be suspended at the same time. - Limit the number of channels that can have messages or signals pending at the same time. A No-OP migration is put in place to ensure that all `BoundedVec`s still decode and not truncate after upgrade. The storage version is thereby bumped to 4 to have our tooling remind us to deploy that migration. --------- Signed-off-by:
Oliver Tale-Yazdi <[email protected]> Co-authored-by:
Francisco Aguirre <[email protected]>
-
- Jan 26, 2024
-
-
Liam Aharon authored
Related https://github.com/paritytech/polkadot-sdk/issues/3032 --- Using https://github.com/liamaharon/cargo-workspace-version-tools/ `cargo run -- sync --path ../polkadot-sdk` --------- Signed-off-by:
Oliver Tale-Yazdi <[email protected]> Co-authored-by:
Oliver Tale-Yazdi <[email protected]>
-
- Jan 24, 2024
-
-
Just van Stam authored
Moved from: https://github.com/paritytech/polkadot/pull/6951 closes https://github.com/paritytech/polkadot-sdk/issues/490 - [x] update cumulus --- This PR introduces transactional processing of certain xcm instructions. For the list of instructions checkout https://github.com/paritytech/polkadot-sdk/issues/490. The transactional processing is implemented as an xcm-executor config item. The two implementations in this PR are `FrameTransactionalProcessor` and `()`. The `()` implementation does no transactional processing. Each implementation of the `ProcessTransaction` trait has an `IS_TRANSACTIONAL` const that tells the XCVM if transactional processing is actually implemented. If Transactional processing is implemented, changes to touched registers should also be rolled back to prevent inconsistencies. Note for reviewers: Check out the following safety assumption: https://github.com/paritytech/polkadot-sdk/pull/1222/files#diff-4effad7d8c1c9de19fd27e18661cbf2128c8718f3b2420a27d2f816e0749ea53R30 --------- Co-authored-by:
Keith Yeung <[email protected]> Co-authored-by:
Francisco Aguirre <[email protected]> Co-authored-by: command-bot <>
-
Branislav Kontur authored
This PR avoids automatically pulling rococo/westend runtime constants into the runtime by default. Usually, we have testnet runtimes dedicated to rococo or westend, and therefore, we don't need both dependencies. Additionally, it prevents pulling rococo/westend-related items into the `polkadot-fellows` repo, as seen in the Cargo.lock [here](https://github.com/polkadot-fellows/runtimes/blob/main/Cargo.lock#L14137-L14151) and [here](https://github.com/polkadot-fellows/runtimes/blob/main/Cargo.lock#L9756-L9770 ). --------- Co-authored-by:
Adrian Catangiu <[email protected]>
-
- Jan 23, 2024
-
-
Branislav Kontur authored
There were several improvements and PRs that didn't apply to all runtimes, so this PR attempts to align those small differences. In addition, the PR eliminates unused dependencies across multiple modules. Relates to PR for `polkadot-fellows`: https://github.com/polkadot-fellows/runtimes/pull/154
-
- Jan 22, 2024
-
-
Marcin S. authored
The goal is to move all system chains on Rococo (+ other testnets?) to use async backing. Starting with `asset-hub-rococo` to get feedback, before I do the rest. ## Related Example: https://github.com/paritytech/polkadot-sdk/pull/1619/ Guide: https://github.com/w3f/polkadot-wiki/blob/master/docs/maintain/maintain-guides-async-backing.md --------- Co-authored-by:
Branislav Kontur <[email protected]> Co-authored-by:
Dónal Murray <[email protected]>
-
joe petrowski authored
Clean up all the old syntax. --------- Co-authored-by: command-bot <> Co-authored-by:
gupnik <[email protected]> Co-authored-by:
Nikhil Gupta <[email protected]> Co-authored-by:
Maksym H <[email protected]>
-
- Jan 19, 2024
-
-
Serban Iorga authored
Update bridges subtree
-
- Jan 17, 2024
-
-
Egor_P authored
This PR backports version bumps from release branch `release-polkadot-v1.6.0` back to `master` and also moved `prdoc` files related to the release to the appropriate folder
-
- Jan 16, 2024
-
-
Francisco Aguirre authored
# Note for reviewer Most changes are just syntax changes necessary for the new version. Most important files should be the ones under the `xcm` folder. # Description Added XCMv4. ## Removed `Multi` prefix The following types have been renamed: - MultiLocation -> Location - MultiAsset -> Asset - MultiAssets -> Assets - InteriorMultiLocation -> InteriorLocation - MultiAssetFilter -> AssetFilter - VersionedMultiAsset -> VersionedAsset - WildMultiAsset -> WildAsset - VersionedMultiLocation -> VersionedLocation In order to fix a name conflict, the `Assets` in `xcm-executor` were renamed to `HoldingAssets`, as they represent assets in holding. ## Removed `Abstract` asset id It was not being used anywhere and this simplifies the code. Now assets are just constructed as follows: ```rust let asset: Asset = (AssetId(Location::new(1, Here)), 100u128).into(); ``` No need for specifying `Concrete` anymore. ## Outcome is now a named fields struct Instead of ```rust pub enum Outcome { Complete(Weight), Incomplete(Weight, Error), Error(Error), } ``` we now have ```rust pub enum Outcome { Complete { used: Weight }, Incomplete { used: Weight, error: Error }, Error { error: Error }, } ``` ## Added Reanchorable trait Now both locations and assets implement this trait, making it easier to reanchor both. ## New syntax for building locations and junctions Now junctions are built using the following methods: ```rust let location = Location { parents: 1, interior: [Parachain(1000), PalletInstance(50), GeneralIndex(1984)].into() }; ``` or ```rust let location = Location::new(1, [Parachain(1000), PalletInstance(50), GeneralIndex(1984)]); ``` And they are matched like so: ```rust match location.unpack() { (1, [Parachain(id)]) => ... (0, Here) => ..., (1, [_]) => ..., } ``` This syntax is mandatory in v4, and has been also implemented for v2 and v3 for easier migration. This was needed to make all sizes smaller. # TODO - [x] Scaffold v4 - [x] Port github.com/paritytech/polkadot/pull/7236 - [x] Remove `Multi` prefix - [x] Remove `Abstract` asset id --------- Co-authored-by: command-bot <> Co-authored-by:
Keith Yeung <[email protected]>
-
- Jan 07, 2024
-
-
dependabot[bot] authored
Bumps the known_good_semver group with 4 updates: [serde](https://github.com/serde-rs/serde), [serde_json](https://github.com/serde-rs/json), [clap](https://github.com/clap-rs/clap) and [syn](https://github.com/dtolnay/syn). Updates `serde` from 1.0.194 to 1.0.195 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/serde/releases">serde's releases</a>.</em></p> <blockquote> <h2>v1.0.195</h2> <ul> <li>Prevent remote definitions of tuple struct or tuple variant from triggering dead_code warning (<a href="https://redirect.github.com/serde-rs/serde/issues/2671">#2671</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/serde/commit/03eec42c3313b36da416be1486e9ecac345784d5"><code>03eec42</code></a> Release 1.0.195</li> <li><a href="https://github.com/serde-rs/serde/commit/196f311ae2fd8ad94fe38a57830419859a4d3dbb"><code>196f311</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2671">#2671</a> from dtolnay/deadremote</li> <li><a href="https://github.com/serde-rs/serde/commit/38d9e0b2091e9b6150486c2c37367819b86bcc39"><code>38d9e0b</code></a> Revert "Add FIXME to fix dead_code warning when using serde(remote)"</li> <li><a href="https://github.com/serde-rs/serde/commit/6502b3131697eff6420786ad71f87f29cfff3a13"><code>6502b31</code></a> Fix new dead_code warning in tuple struct and tuple variant remote defs</li> <li><a href="https://github.com/serde-rs/serde/commit/6f1a8c3115c8d2502178c25d610fbaee2e82c46b"><code>6f1a8c3</code></a> Add FIXME to fix dead_code warning when using serde(remote)</li> <li><a href="https://github.com/serde-rs/serde/commit/d883c94cc9fe72d0512dc7f4def7191a401595c9"><code>d883c94</code></a> Work around dead_code warning in tests</li> <li><a href="https://github.com/serde-rs/serde/commit/961fa59a7469c5b5e323b9723323df412048d60d"><code>961fa59</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2670">#2670</a> from serde-rs/exhaustive</li> <li><a href="https://github.com/serde-rs/serde/commit/8bc71def551df190e6817d3311e5c76f751f53e6"><code>8bc71de</code></a> Fill in omitted patterns for GenericArguments match</li> <li><a href="https://github.com/serde-rs/serde/commit/7c65a9dc0eab2d4d829b258a7b3549351bbe8dcd"><code>7c65a9d</code></a> Pick up changes to non_exhaustive_omitted_patterns lint</li> <li>See full diff in <a href="https://github.com/serde-rs/serde/compare/v1.0.194...v1.0.195">compare view</a></li> </ul> </details> <br /> Updates `serde_json` from 1.0.110 to 1.0.111 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/json/releases">serde_json's releases</a>.</em></p> <blockquote> <h2>v1.0.111</h2> <ul> <li>Improve floating point parsing performance on loongarch64 (<a href="https://redirect.github.com/serde-rs/json/issues/1100">#1100</a>, thanks <a href="https://github.com/heiher"><code>@heiher</code></a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/json/commit/0131ac68212e8094bd14ee618587d731b4f9a68b"><code>0131ac6</code></a> Release 1.0.111</li> <li><a href="https://github.com/serde-rs/json/commit/96ecfadd3f7dd6366a2d07a098e228d15df93cb4"><code>96ecfad</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/json/issues/1100">#1100</a> from heiher/limb-64-la64</li> <li><a href="https://github.com/serde-rs/json/commit/c80dbaf8ff5902ca670e0a48bbe495065b9314f5"><code>c80dbaf</code></a> Set limb width to 64 for loongarch64</li> <li>See full diff in <a href="https://github.com/serde-rs/json/compare/v1.0.110...v1.0.111">compare view</a></li> </ul> </details> <br /> Updates `clap` from 4.4.12 to 4.4.13 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/releases">clap's releases</a>.</em></p> <blockquote> <h2>v4.4.13</h2> <h2>[4.4.13] - 2024-01-04</h2> <h3>Documentation</h3> <ul> <li>Fix link to structopt migration guide</li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's changelog</a>.</em></p> <blockquote> <h2>[4.4.13] - 2024-01-04</h2> <h3>Documentation</h3> <ul> <li>Fix link to structopt migration guide</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/clap-rs/clap/commit/2ab48b295c2463ce8c141a9868095b811ccf3b99"><code>2ab48b2</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/7a06a8cd619db704c6d826bf752eae3b86ce23a8"><code>7a06a8c</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/cca190efedf40f48147a3a4a777a9cc17728abdf"><code>cca190e</code></a> docs: Correct link to StructOpt migration guide</li> <li><a href="https://github.com/clap-rs/clap/commit/5c31f453c1a9f46109db8e0a47ed212748c0556c"><code>5c31f45</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5281">#5281</a> from Manishearth/safety-docs</li> <li><a href="https://github.com/clap-rs/clap/commit/ddae7e6f411c4c87294212152b8d9beea16637e7"><code>ddae7e6</code></a> Correct safety docs</li> <li><a href="https://github.com/clap-rs/clap/commit/48d28aa689bfd0fb44ec025244b30ba261e2515a"><code>48d28aa</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/748ce18cc2ccc3f7c07fa8b7c5b6f90ed9242b72"><code>748ce18</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/adbe6ec4cb6a617070c41927a389d0bea7b30936"><code>adbe6ec</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5278">#5278</a> from henry-hsieh/fix-nosort</li> <li><a href="https://github.com/clap-rs/clap/commit/2b48858ba84c62e9af97bee4734d70530254cd8a"><code>2b48858</code></a> fix: Skip nosort option below bash 4.4</li> <li><a href="https://github.com/clap-rs/clap/commit/777b744102cde324dc75534ef043efc15a9f40be"><code>777b744</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5277">#5277</a> from clap-rs/renovate/actions-setup-python-5.x</li> <li>Additional commits viewable in <a href="https://github.com/clap-rs/clap/compare/v4.4.12...v4.4.13">compare view</a></li> </ul> </details> <br /> Updates `syn` from 2.0.47 to 2.0.48 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/dtolnay/syn/releases">syn's releases</a>.</em></p> <blockquote> <h2>2.0.48</h2> <ul> <li>Improve error message on unexpected token after <code>else</code> (<a href="https://redirect.github.com/dtolnay/syn/issues/1578">#1578</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/dtolnay/syn/commit/5e16fc24e68b16a381cb7ef22455dba9db143083"><code>5e16fc2</code></a> Release 2.0.48</li> <li><a href="https://github.com/dtolnay/syn/commit/dc40084b15ab4a443179fc39cbadac6452408838"><code>dc40084</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/syn/issues/1578">#1578</a> from dtolnay/elseblock</li> <li><a href="https://github.com/dtolnay/syn/commit/82fcefce69d36e78301936c5af91f005d6a24357"><code>82fcefc</code></a> Fix error message on unexpected token after 'else'</li> <li><a href="https://github.com/dtolnay/syn/commit/e8a5c68ad45194e575a923f6b1e08f1817196331"><code>e8a5c68</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/syn/issues/1576">#1576</a> from dtolnay/exhaustive</li> <li><a href="https://github.com/dtolnay/syn/commit/97b1df6d935cb4801f4090782304577c8574d024"><code>97b1df6</code></a> Pick up changes to non_exhaustive_omitted_patterns lint</li> <li>See full diff in <a href="https://github.com/dtolnay/syn/compare/2.0.47...2.0.48 ">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by:
dependabot[bot] <[email protected]> Co-authored-by:
dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
-
- Jan 04, 2024
-
-
dependabot[bot] authored
Bumps the known_good_semver group with 4 updates: [serde](https://github.com/serde-rs/serde), [serde_json](https://github.com/serde-rs/json), [clap](https://github.com/clap-rs/clap) and [serde_yaml](https://github.com/dtolnay/serde-yaml). Updates `serde` from 1.0.193 to 1.0.194 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/serde/releases">serde's releases</a>.</em></p> <blockquote> <h2>v1.0.194</h2> <ul> <li>Update proc-macro2 to fix caching issue when using a rustc-wrapper such as sccache</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/serde/commit/d2d977a6c6dcff237ae956336d18b0c900c61aad"><code>d2d977a</code></a> Release 1.0.194</li> <li><a href="https://github.com/serde-rs/serde/commit/a9a6ee9d7f2e3a3306ad7c7a8f21dcf369c6acb7"><code>a9a6ee9</code></a> Pull in proc-macro2 sccache fix</li> <li><a href="https://github.com/serde-rs/serde/commit/28c5d215c11b66368b725f04cb92e49e4350bcdc"><code>28c5d21</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2669">#2669</a> from dtolnay/optionifletelse</li> <li><a href="https://github.com/serde-rs/serde/commit/3d6a789562579fb7ea783e0d7f35530914d8baca"><code>3d6a789</code></a> Remove option_if_let_else clippy suppression</li> <li><a href="https://github.com/serde-rs/serde/commit/a0e68698e33fa928f1d9f208d68b17df9f8bb568"><code>a0e6869</code></a> Work around doc_link_with_quotes pedantic clippy lint</li> <li>See full diff in <a href="https://github.com/serde-rs/serde/compare/v1.0.193...v1.0.194">compare view</a></li> </ul> </details> <br /> Updates `serde_json` from 1.0.108 to 1.0.110 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/json/releases">serde_json's releases</a>.</em></p> <blockquote> <h2>v1.0.109</h2> <ul> <li>Documentation improvements</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/json/commit/df5cf215b70fb6341b255e7c0a210c06f64c0669"><code>df5cf21</code></a> Release 1.0.110</li> <li><a href="https://github.com/serde-rs/json/commit/c35856a93c37b48b3d6efc4fec8e05554dd3f9d5"><code>c35856a</code></a> Pull in proc-macro2 sccache fix</li> <li><a href="https://github.com/serde-rs/json/commit/f88bf1fccb05aa4de129675de44eb6aaf3fec0a0"><code>f88bf1f</code></a> Release 1.0.109</li> <li><a href="https://github.com/serde-rs/json/commit/bb62c73ecef901e689b0a7a67ed613a32975520c"><code>bb62c73</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/json/issues/1097">#1097</a> from serde-rs/doccfg</li> <li><a href="https://github.com/serde-rs/json/commit/df36d109fd9f9cdd22a874c0177cafec12237f95"><code>df36d10</code></a> Restore doc cfg on re-exports</li> <li><a href="https://github.com/serde-rs/json/commit/c3670913423329c166add9d85ecdfc3e3da21e7a"><code>c367091</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/json/issues/1095">#1095</a> from dtolnay/hashtest</li> <li><a href="https://github.com/serde-rs/json/commit/b328ee7df4dd772922f084600aa7cea39218b694"><code>b328ee7</code></a> Eliminate hash closure in favor of calling hash_one directly</li> <li><a href="https://github.com/serde-rs/json/commit/b9bcbad3c094042f79f1a45189ec0edbb8f9f322"><code>b9bcbad</code></a> Use BuildHasher::hash_one</li> <li><a href="https://github.com/serde-rs/json/commit/7ff6c9e30c2ecc2cdcf089ed86c7ccfe7a41721c"><code>7ff6c9e</code></a> Use random hasher state for number hashing test</li> <li><a href="https://github.com/serde-rs/json/commit/fe031cd1de4dde5b47e0f18934632b41bd18b48d"><code>fe031cd</code></a> Delete trace_macros! functionality from test</li> <li>Additional commits viewable in <a href="https://github.com/serde-rs/json/compare/v1.0.108...v1.0.110">compare view</a></li> </ul> </details> <br /> Updates `clap` from 4.4.11 to 4.4.12 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/releases">clap's releases</a>.</em></p> <blockquote> <h2>v4.4.12</h2> <h2>[4.4.12] - 2023-12-28</h2> <h3>Performance</h3> <ul> <li>Only ask <code>TypedValueParser</code> for possible values if needed</li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's changelog</a>.</em></p> <blockquote> <h2>[4.4.12] - 2023-12-28</h2> <h3>Performance</h3> <ul> <li>Only ask <code>TypedValueParser</code> for possible values if needed</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/clap-rs/clap/commit/6d601e6f312857d78f47741268f1748840484d4a"><code>6d601e6</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/048e7f0fbc4f8108894e4307af768c8d332a0576"><code>048e7f0</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/53f5b820988c1c03f0d2696fc144857ad461edc1"><code>53f5b82</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5267">#5267</a> from vermiculus/sa/avoid-pv-expansion-in-help</li> <li><a href="https://github.com/clap-rs/clap/commit/05cd057978db743a65fb5fde33213af752d064e7"><code>05cd057</code></a> perf: Avoid retrieving possible_values unless used</li> <li><a href="https://github.com/clap-rs/clap/commit/29208083b0598ba7d1b80e79821c0ba3eb2342ce"><code>2920808</code></a> test: Update snapshots</li> <li><a href="https://github.com/clap-rs/clap/commit/28763ebb6d8714f6ca588bf477729040e0e760b0"><code>28763eb</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/ace7bb5b4570b030f7c2d0fa91e0afaaac1b0030"><code>ace7bb5</code></a> docs(complete): Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/76beca4d4d42a817bbb578f23553c64ded2aea97"><code>76beca4</code></a> docs(complete): Polish API reference for dynamic</li> <li><a href="https://github.com/clap-rs/clap/commit/3630e582d3ec59912b8e9369c38687695ddb1f43"><code>3630e58</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5273">#5273</a> from epage/docsrs</li> <li><a href="https://github.com/clap-rs/clap/commit/3724b9e2e4c2a2e69337b6d809949b246d3fef39"><code>3724b9e</code></a> docs: Include more content on docs.rs</li> <li>See full diff in <a href="https://github.com/clap-rs/clap/compare/v4.4.11...v4.4.12">compare view</a></li> </ul> </details> <br /> Updates `serde_yaml` from 0.9.29 to 0.9.30 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/dtolnay/serde-yaml/releases">serde_yaml's releases</a>.</em></p> <blockquote> <h2>0.9.30</h2> <ul> <li>Update proc-macro2 to fix caching issue when using a rustc-wrapper such as sccache</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/dtolnay/serde-yaml/commit/09ee25156f608f95150b27edd120bd5471db3c64"><code>09ee251</code></a> Release 0.9.30</li> <li><a href="https://github.com/dtolnay/serde-yaml/commit/caea939ece85ab54ac41de0672d683905f1e406a"><code>caea939</code></a> Pull in proc-macro2 sccache fix</li> <li><a href="https://github.com/dtolnay/serde-yaml/commit/d255918c141fd72d01f169bb5aa0152234981699"><code>d255918</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/serde-yaml/issues/403">#403</a> from dtolnay/optionifletelse</li> <li><a href="https://github.com/dtolnay/serde-yaml/commit/8cfeedd766f83dab24d03b9fb11b72886a247425"><code>8cfeedd</code></a> Remove option_if_let_else clippy suppression</li> <li>See full diff in <a href="https://github.com/dtolnay/serde-yaml/compare/0.9.29...0.9.30 ">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by:
dependabot[bot] <[email protected]> Co-authored-by:
dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
-
- Dec 22, 2023
-
-
joe petrowski authored
- Updates all safe call filters to allow `system::authorize_upgrade`. - Updates Coretime safe call filter to allow `sudo` and `system_set_storage`. - Update Coretime teleports to allow teleportation with other system chains. --------- Co-authored-by:
Bastian Köcher <[email protected]>
-
- Dec 21, 2023
-
-
Svyatoslav Nikolsky authored
related to https://github.com/paritytech/parity-bridges-common/issues/2739
-
Clara van Staden authored
# Description Adds Snowbridge to the Rococo bridge hub runtime. Includes config changes required in Rococo asset hub. --------- Co-authored-by:
Alistair Singh <[email protected]> Co-authored-by:
ron <[email protected]> Co-authored-by:
Vincent Geddes <[email protected]> Co-authored-by: claravanstaden <Cats 4 life!>
-
- Dec 20, 2023
-
-
joe petrowski authored
Adds the `authorize_upgrade` -> `enact_authorized_upgrade` pattern to `frame-system`. This will be useful for upgrading bridged chains that are under the governance of Polkadot without passing entire runtime Wasm blobs over a bridge. Notes: - Changed `enact_authorized_upgrade` to `apply_authorized_upgrade`. Personal opinion, "apply" more accurately expresses what it's doing. Can change back if outvoted. - Remove `check_version` in favor of two extrinsics, so as to make _checked_ the default. - Left calls in `parachain-system` and marked as deprecated to prevent breaking the API. They just call into the `frame-system` functions. - Updated `frame-system` benchmarks to v2 syntax. --------- Co-authored-by: command-bot <>
-
- Dec 18, 2023
-
-
Branislav Kontur authored
This PR contains just a few clippy fixes and nits, which are, however, relaxed by workspace clippy settings here: https://github.com/paritytech/polkadot-sdk/blob/master/Cargo.toml#L483-L506 --------- Co-authored-by:
Dmitry Sinyavin <[email protected]> Co-authored-by:
ordian <[email protected]> Co-authored-by: command-bot <> Co-authored-by:
Bastian Köcher <[email protected]>
-
- Dec 15, 2023
-
-
Svyatoslav Nikolsky authored
This PR adds possibility for relay chain governance to halt and resume bridge pallets using XCM calls. Following calls are enabled over XCM for the `root` origin: `pallet_bridge_grandpa::set_operating_mode`, `pallet_bridge_parachains::set_operating_mode` and `pallet_bridge_messages::set_operating_mode`.
-
- Dec 14, 2023
-
-
Francisco Aguirre authored
In the move from the old `Currency` traits to the new `fungible/s` family of traits, we already had the `FungiblesAdapter` and `NonFungiblesAdapter` for multiple fungible and non fungible assets respectively. However, for handling only one fungible asset, we were missing a `FungibleAdapter`, and so used the old `CurrencyAdapter` instead. This PR aims to fill in that gap, and provide the new adapter for more updated examples. I marked the old `CurrencyAdapter` as deprecated as part of this PR, and I'll change it to the new `FungibleAdapter` in a following PR. The two stages are separated so as to not bloat this PR with some name fixes in tests. --------- Co-authored-by: command-bot <>
-
Egor_P authored
This PR backports `transaction_version` bump from `1.5.0` release back to `master`
-
- Dec 13, 2023
-
-
Squirrel authored
We currently use a bit of a hack in `.cargo/config` to make sure that clippy isn't too annoying by specifying the list of lints. There is now a stable way to define lints for a workspace. The only down side is that every crate seems to have to opt into this so there's a *few* files modified in this PR. Dependencies: - [x] PR that upgrades CI to use rust 1.74 is merged. --------- Co-authored-by:
joe petrowski <[email protected]> Co-authored-by:
Branislav Kontur <[email protected]> Co-authored-by:
Liam Aharon <[email protected]>
-
Branislav Kontur authored
Co-authored-by: command-bot <>
-
Svyatoslav Nikolsky authored
So far the `bridge-hub-test-utils` contained a tests set for testing BridgeHub runtime that is bridging with the remote **parachain**. But we have https://github.com/paritytech/polkadot-sdk/pull/2540 coming, which would add Rococo <> Bulletin chain bridge (where Bulletin = standalone chain that is using GRANDPA finality). Then it'll be expanded to Polkadot BH as well. So this PR adds the same set of tests to the `bridge-hub-test-utils`, but for the case when remote chain is the chain with GRANDPA finality. There's a lot of changes in this PR - I'll describe some: - I've added `BasicParachainRuntime` trait to decrease number of lines we need to add to `where` clause. Could revert, but imo it is useful; - `cumulus/parachains/runtimes/bridge-hubs/test-utils/src/test_data` is a submodule for generating test data for the test sets. `from_parachain.rs` is used in tests for the case when remote chain is a parachain, `from_grandpa_chain.rs` - for the bridges with remote GRANDPA chains. `mod.rs` has some code, shared by both types of tests; - `cumulus/parachains/runtimes/bridge-hubs/test-utils/src/test_data` is a submodule with all test cases. The `mod.rs` has tests, suitable for all cases. There's also `wth_parachain.rs` and `with_grandpa_chain.rs` with the same meaning as above; - I've merged the "core" code of two previous tests - `relayed_incoming_message_works` and `complex_relay_extrinsic_works` into one single `relayed_incoming_message_works` test. So now we are always constructing extrinsics and are dispatching them using executive module (meaning all signed extensions are also tested). New test set is used here: https://github.com/paritytech/polkadot-sdk/pull/2540. Once this PR is merged, I'll merge that other PR with master to remove duplicate changes. I'm also planning to cleanup generic constraints + remove some unnecessary assumptions about used chains in a follow-up PRs. But for now I think this PR has enough changes, so don't want to complicate it even more. --- Breaking changes for the code that have used those tests before: - the `construct_and_apply_extrinsic` callback now accepts the `RuntimeCall` instead of the `pallet_utility::Call`; - the `construct_and_apply_extrinsic` now may be called multiple times for the single test, so make sure the `frame_system::CheckNonce` is correctly constructed; - all previous tests have been moved from `bridge_hub_test_utils::test_cases` to `bridge_hub_test_utils::test_cases::from_parachain` module; - there are several changes in test arguments - please refer to https://github.com/paritytech/polkadot-sdk/compare/sv-tests-for-bridge-with-remote-grandpa-chain?expand=1#diff-79a28d4d3e1749050341c2424f00c4c139825b1a20937767f83e58b95166735c for details.
-