Changes (partial https://github.com/paritytech/polkadot-sdk/issues/994):
- Set log to `0.4.20` everywhere
- Lift `log` to the workspace

Starting with a simpler one after seeing
https://github.com/paritytech/polkadot-sdk/pull/2065 from @jsdw

.
This sets the `default-features` to `false` in the root and then
overwrites that in each create to its original value. This is necessary
since otherwise the `default` features are additive and its impossible
to disable them in the crate again once they are enabled in the
workspace.

I am using a tool to do this, so its mostly a test to see that it works
as expected.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

On grid distribution messages have two paths of reaching a node, so
there is the possiblity of a race when two peers send each other the
same statement around the same time. Statement local_knowledge will tell
us that the peer should have not send the statement because we sent it
to it.

Fix it by also keeping track only of the statement we received from a
given peer and penalize it only if it sends it to us more than once.

Fixes: https://github.com/paritytech/polkadot-sdk/issues/2346

Additionally, also use different Cost labels for different paths to make
it easier to debug things.

---------

Signed-off-by: Alexandru Gheorghe <[email protected]>

PR adds condition to ignore master branch for prdoc and labels GHA.

This option doesn't work because all PRs are for master thus the actions
won't start:
```yml
on:
  pull_request:
    branches-ignore:
      - master
```

This option doesn't work because actions don't see the PR number and
[break](https://github.com/paritytech/polkadot-sdk/actions/runs/7827272667/job/21354764953):
```yml
on:
  push:
    branches-ignore:
      - master
```

cc https://github.com/paritytech/ci_cd/issues/940
cc https://github.com/paritytech/polkadot-sdk/issues/3240

Related to https://github.com/paritytech/polkadot-sdk/issues/3242

Reorganizing the bridge zombienet tests in order to:
- separate the environment spawning from the actual tests
- offer better control over the tests and some possibility to
orchestrate them as opposed to running everything from the zndsl file

Only rewrote the asset transfer test using this new "framework". The old
logic and old tests weren't functionally modified or deleted. The plan
is to get feedback on this approach first and if this is agreed upon,
migrate the other 2 tests later in separate PRs and also do other
improvements later.

This PR improves the transaction status documentation.
- Added doc references for describing the main states
- Extra comment wrt pool ready / future queues
- `FinalityTimeout` no longer describes a lagging finality gadget, it
signals that the maximum number of finality gadgets has been reached

A few helper methods are added to indicate when:
- a final event is generated by the transaction pool for a given event
- a final event is provided, although the transaction might become valid
at a later time and could be re-submitted

The helper methods are used and taken from
https://github.com/paritytech/polkadot-sdk/pull/3079 to help us better
keep it in sync.


cc @paritytech/subxt-team

---------

Signed-off-by: Alexandru Vasile <[email protected]>

resolve https://github.com/paritytech/polkadot-sdk/issues/2321

- [x] refactor `security` module into a conditionally compiled
- [x] rename `amd64` into x86-64 for consistency with conditional
compilation guards and remove reference to a particular vendor
- [x] run unit tests and zombienet

---------

Co-authored-by: s0me0ne-unkn0wn <[email protected]>

Add [forklift
caching](https://gitlab.parity.io/parity/infrastructure/ci_cd/forklift/forklift)
to remainig jobs

by .sh and .py scripts:
- cargo-check-each-crate x6 (`.gitlab/check-each-crate.py`)
- build-linux-stable (`polkadot/scripts/build-only-wasm.sh`)

by before_script:
- build-linux-substrate
- build-subkey-linux (with `.build-subkey` job)
- cargo-check-benches x2

**To disable feature set FORKLIFT_BYPASS variable to true in [project
settings in
gitlab](https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/settings/ci_cd)**
(forklift now handles FORKLIFT_BYPASS by itself)

This PR backports version bumps from `1.7.0` release branch and moves
related prdoc files to the appropriate folder.

Closes #169  

Fork of the `orml-parameters-pallet` as introduced by
https://github.com/open-web3-stack/open-runtime-module-library/pull/927
(cc @xlc)
It greatly changes how the macros work, but keeps the pallet the same.
The downside of my code is now that it does only support constant keys
in the form of types, not value-bearing keys.
I think this is an acceptable trade off, give that it can be used by
*any* pallet without any changes.

The pallet allows to dynamically set parameters that can be used in
pallet configs while also restricting the updating on a per-key basis.
The rust-docs contains a complete example.

Changes:
- Add `parameters-pallet`
- Use in the kitchensink as demonstration
- Add experimental attribute to define dynamic params in the runtime.
- Adding a bunch of traits to `frame_support::traits::dynamic_params`
that can be re-used by the ORML macros

## Example

First to define the parameters in the runtime file. The syntax is very
explicit about the codec index and errors if there is no.
```rust
#[dynamic_params(RuntimeParameters, pallet_parameters::Parameters::<Runtime>))]
pub mod dynamic_params {
	use super::*;

	#[dynamic_pallet_params]
	#[codec(index = 0)]
	pub mod storage {
		/// Configures the base deposit of storing some data.
		#[codec(index = 0)]
		pub static BaseDeposit: Balance = 1 * DOLLARS;

		/// Configures the per-byte deposit of storing some data.
		#[codec(index = 1)]
		pub static ByteDeposit: Balance = 1 * CENTS;
	}

	#[dynamic_pallet_params]
	#[codec(index = 1)]
	pub mod contracts {
		#[codec(index = 0)]
		pub static DepositPerItem: Balance = deposit(1, 0);

		#[codec(index = 1)]
		pub static DepositPerByte: Balance = deposit(0, 1);
	}
}
```

Then the pallet is configured with the aggregate:  
```rust
impl pallet_parameters::Config for Runtime {
	type AggregratedKeyValue = RuntimeParameters;
	type AdminOrigin = EnsureRootWithSuccess<AccountId, ConstBool<true>>;
	...
}
```

And then the parameters can be used in a pallet config:
```rust
impl pallet_preimage::Config for Runtime {
	type DepositBase = dynamic_params::storage::DepositBase;
}
```

A custom origin an be defined like this:  
```rust
pub struct DynamicParametersManagerOrigin;

impl EnsureOriginWithArg<RuntimeOrigin, RuntimeParametersKey> for DynamicParametersManagerOrigin {
	type Success = ();

	fn try_origin(
		origin: RuntimeOrigin,
		key: &RuntimeParametersKey,
	) -> Result<Self::Success, RuntimeOrigin> {
		match key {
			RuntimeParametersKey::Storage(_) => {
				frame_system::ensure_root(origin.clone()).map_err(|_| origin)?;
				return Ok(())
			},
			RuntimeParametersKey::Contract(_) => {
				frame_system::ensure_root(origin.clone()).map_err(|_| origin)?;
				return Ok(())
			},
		}
	}

	#[cfg(feature = "runtime-benchmarks")]
	fn try_successful_origin(_key: &RuntimeParametersKey) -> Result<RuntimeOrigin, ()> {
		Ok(RuntimeOrigin::Root)
	}
}
```

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Nikhil Gupta <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: command-bot <>

The `TotalLockedValue` storage value in nomination pools pallet may get
out of sync if the staking pallet does implicit withdrawal of unlocking
chunks belonging to a bonded pool stash. This fix is based on a new
method in the `OnStakingUpdate` traits, `on_withdraw`, which allows the
nomination pools pallet to adjust the `TotalLockedValue` every time
there is an implicit or explicit withdrawal from a bonded pool's stash.

This PR also adds a migration that checks and updates the on-chain TVL
if it got out of sync due to the bug this PR fixes.

**Changes to `trait OnStakingUpdate`**

In order for staking to notify the nomination pools pallet that chunks
where withdrew, we add a new method, `on_withdraw` to the
`OnStakingUpdate` trait. The nomination pools pallet filters the
withdraws that are related to bonded pool accounts and updates the
`TotalValueLocked` accordingly.

**Others**
- Adds try-state checks to the EPM/staking e2e tests
- Adds tests for auto withdrawing in the context of nomination pools

**To-do**
- [x] check if we need a migration to fix the current `TotalValueLocked`
(run try-runtime)
- [x] migrations to fix the current on-chain TVL value 

 ✅ **Kusama**:
```
TotalValueLocked: 99.4559 kKSM
TotalValueLocked (calculated) 99.4559 kKSM
```
⚠

️ **Westend**:
```
TotalValueLocked: 18.4060 kWND
TotalValueLocked (calculated) 18.4050 kWND
```
**Polkadot**: TVL not released yet.

Closes https://github.com/paritytech/polkadot-sdk/issues/3055

---------

Co-authored-by: command-bot <>
Co-authored-by: Ross Bulat <[email protected]>
Co-authored-by: Dónal Murray <[email protected]>

Preparation for https://github.com/paritytech/polkadot-sdk/issues/2664

Changes:
- Only require `Hash` instead of `Block` for the benchmarking
- Refactor DB types to do the same

## Integration

This breaking change can easily be integrated into your node via:  
```patch
- cmd.run::<Block, ()>(config)
+ cmd.run::<HashingFor<Block>, ()>(config)
```

Status: waiting for CI checks

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: cheme <[email protected]>

Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

This is the significant step to make BEEFY client able to handle both
ECDSA and (ECDSA, BLS) type signature. The idea is having BEEFY Client
generic on crypto types makes migration to new types smoother.

This makes the BEEFY Keystore generic over AuthorityId and extends its
tests to cover the case when the AuthorityId is of type (ECDSA,
BLS12-377)

---------

Co-authored-by: Davide Galassi <[email protected]>
Co-authored-by: Robert Hambrock <[email protected]>

Adding Rust metadata for doc
see https://docs.rs/about/metadata

---------

Co-authored-by: Alexander Theißen <[email protected]>

When switching from the instrumented gas metering to the wasmi gas
metering we also removed all imposed limits regarding Wasm module
internals. All those things do not interact with the host and have to be
handled by wasmi. For example, Wasmi charges additional gas for
parameters to each function because as they incur some overhead.

Back then we took the opportunity to remove the dependency on the
deprecated `parity-wasm` which was used to enforce those limits.

This PR merely removes them from the `Schedule` they aren't enforced for
a while.

Those were used for some adhoc comparison of solang vs ink! with regards
to ERC20 transfers. Not been used for a while.

Benchmarking is done here now:
[smart-bench](https://github.com/paritytech/smart-bench): Weight based
benchmark to test how much transaction actually fit into a block with
the current Weights
[schlau](https://github.com/ascjones/schlau): Time based benchmarks to
compare performance

When doing a cross contract call you can supply an optional Weight limit
for that call. If one doesn't specify the limit (setting it to 0) the
sub call will have all the remaining gas available. If one does specify
the limit we subtract that amount eagerly from the Weight meter and fail
fast if not enough `Weight` is available.

This is quite annoying because setting a fixed limit will set the
`gas_required` in the gas estimation according to the specified limit.
Even if in that dry-run the actual call didn't consume that whole
amount. It effectively discards the more precise measurement it should
have from the dry-run.

This PR changes the behaviour so that the supplied limit is an actual
limit: We do the cross contract call even if the limit is higher than
the remaining `Weight`. We then fail and roll back in the cub call in
case there is not enough weight.

This makes the weight estimation in the dry-run no longer dependent on
the weight limit supplied when doing a cross contract call.

---------

Co-authored-by: PG Herveou <[email protected]>

Part of: paritytech/polkadot-sdk#239

Polkadot address: 12GyGD3QhT4i2JJpNzvMf96sxxBLWymz4RdGCxRH5Rj5agKW

---------

Co-authored-by: Liam Aharon <[email protected]>

This PR removes the configuration of subsystem benchmarks via CLI
arguments. After this, we only keep configurations only in yaml files.
It removes unnecessary code duplication

This adds `try_state()` and `integrity_test()` to the four runtimes of
the XCM-simulator fuzzer.

With this, we are able to stress-test [message-queue's
try_state](https://github.com/paritytech/polkadot-sdk/blob/7df1ae3b/substrate/frame/message-queue/src/lib.rs#L1245-L1347).

This also adds the `Transact` block-listing from #2424 to avoid
false-positives.

Thank you @ggwpez for the help with the runtime configurations.

Leases can be force set, but since `Leases` is a `StorageValue`, if a
lease misses its sale rotation in which it should expire, it can never
be cleared.

This can happen if a lease is added with an `until` timeslice that lies
in a region whose sale has already started or has passed, even if the
timeslice itself hasn't passed.

This solves that issue in a minimal way, with all expired leases being
cleaned up in each sale rotation, not just the ones that are expiring in
the coming region.

TODO:
- [x] Write test

In order to make the action `Required` it should run always.

cc @ggwpez

1. Benchmark results are collected in a single struct.
2. The output of the results is prettified.
3. The result struct used to save the output as a yaml and store it in
artifacts in a CI job.

```
$ cargo run -p polkadot-subsystem-bench --release -- test-sequence --path polkadot/node/subsystem-bench/examples/availability_read.yaml | tee output.txt
$ cat output.txt

polkadot/node/subsystem-bench/examples/availability_read.yaml #1

Network usage, KiB                     total   per block
Received from peers               510796.000  170265.333
Sent to peers                        221.000      73.667

CPU usage, s                           total   per block
availability-recovery                 38.671      12.890
Test environment                       0.255       0.085


polkadot/node/subsystem-bench/examples/availability_read.yaml #2

Network usage, KiB                     total   per block
Received from peers               413633.000  137877.667
Sent to peers                        353.000     117.667

CPU usage, s                           total   per block
availability-recovery                 52.630      17.543
Test environment                       0.271       0.090


polkadot/node/subsystem-bench/examples/availability_read.yaml #3

Network usage, KiB                     total   per block
Received from peers               424379.000  141459.667
Sent to peers                        703.000     234.333

CPU usage, s                           total   per block
availability-recovery                 51.128      17.043
Test environment                       0.502       0.167

```

```
$ cargo run -p polkadot-subsystem-bench --release -- --ci test-sequence --path polkadot/node/subsystem-bench/examples/availability_read.yaml | tee output.txt
$ cat output.txt
- benchmark_name: 'polkadot/node/subsystem-bench/examples/availability_read.yaml #1'
  network:
  - resource: Received from peers
    total: 509011.0
    per_block: 169670.33333333334
  - resource: Sent to peers
    total: 220.0
    per_block: 73.33333333333333
  cpu:
  - resource: availability-recovery
    total: 31.845848445
    per_block: 10.615282815
  - resource: Test environment
    total: 0.23582828799999941
    per_block: 0.07860942933333313

- benchmark_name: 'polkadot/node/subsystem-bench/examples/availability_read.yaml #2'
  network:
  - resource: Received from peers
    total: 411738.0
    per_block: 137246.0
  - resource: Sent to peers
    total: 351.0
    per_block: 117.0
  cpu:
  - resource: availability-recovery
    total: 18.93596025099999
    per_block: 6.31198675033333
  - resource: Test environment
    total: 0.2541994199999979
    per_block: 0.0847331399999993

- benchmark_name: 'polkadot/node/subsystem-bench/examples/availability_read.yaml #3'
  network:
  - resource: Received from peers
    total: 424548.0
    per_block: 141516.0
  - resource: Sent to peers
    total: 703.0
    per_block: 234.33333333333334
  cpu:
  - resource: availability-recovery
    total: 16.54178526900001
    per_block: 5.513928423000003
  - resource: Test environment
    total: 0.43960946299999537
    per_block: 0.14653648766666513
```

---------

Co-authored-by: Andrei Sandu <[email protected]>

Relates to: https://github.com/paritytech/polkadot-sdk/issues/3214

## TODO

- [ ] backport to the `1.7.0` release

This PR improves compatibility with RISC-V and PolkaVM, allowing more
runtimes to successfully compile.

In particular, it makes the following changes:

- The `sp-mmr-primitives` and `sp-consensus-beefy` crates
unconditionally required an `std`-only dependency; now they only require
those dependencies when the `std` feature is actually enabled. (Our
RISC-V target is, unlike WASM, a true `no_std` target where you can't
accidentally use stuff from `std` anymore.)
- One of our dependencies (the `bitvec` trace) uses a crate called
`radium` which doesn't compile under RISC-V due to incomplete
autodetection logic in their `build.rs` file. The good news is that this
is already fixed in the newest upstream version of `radium`, and the
newest version of `bitvec` uses it. The bad news is that the newest
version of `bitvec` is not currently released on crates.io, so we can't
use it. I've [created an
issue](https://github.com/ferrilab/ferrilab/issues/5) asking for a new
release, but in the meantime I forked the currently used `radium` 0.7,
[fixed the faulty
logic](https://github.com/paritytech/radium-0.7-fork/commit/ed66c8a294b138c67f93499644051d97d4c7fbda)
and used cargo's patching capabilities to use it for the RISC-V runtime
builds. This might be a little hacky, but it is the least intrusive way
to fix the problem, doesn't affect WASM builds at all, and we can
trivially remove it once a new `bitvec` is released.
- The new runtimes are added to the CI to make sure their compilation
doesn't break.

backport of
https://github.com/paritytech/parity-bridges-common/pull/2821 (see
detailed description there)

First in a series of PRs that reduces our use of sp-std with a view to
deprecating it.

This is just looking at /substrate and moving some of the references
from `sp-std` to `core`.
These particular changes should be uncontroversial.

Where macros are used `::core` should be used to remove any ambiguity.

part of https://github.com/paritytech/polkadot-sdk/issues/2101

Superseeds https://github.com/paritytech/polkadot-sdk/pull/1245  

This PR is a migration of the
https://github.com/paritytech/substrate/pull/14577.

The PR added associated types (`AddOrigin` & `RemoveOrigin`) to
`Config`. It allows you to decouple types and areas of responsibility,
since at the moment the same types are responsible for adding and
promoting(removing and demoting). This will improve the flexibility of
the pallet configuration.

```
/// The origin required to add a member.
type AddOrigin: EnsureOrigin<Self::RuntimeOrigin, Success = ()>;

/// The origin required to remove a member. The success value indicates the
/// maximum rank *from which* the removal may be.
type RemoveOrigin: EnsureOrigin<Self::RuntimeOrigin, Success = Rank>;
```
To achieve the backward compatibility, the users of the pallet can use
the old type via the new morph:

```
type AddOrigin = MapSuccess<Self::PromoteOrigin, Ignore>;
type RemoveOrigin = Self::DemoteOrigin;
```

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: PraetorP <[email protected]>
Co-authored-by: Pavel Orlov <[email protected]>

Fixes https://github.com/paritytech/polkadot-sdk/issues/3129

Bumps [indicatif](https://github.com/console-rs/indicatif) from 0.17.6
to 0.17.7.
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/console-rs/indicatif/commit/0c037edc86449d84aa457d7d5db80b4166c18d6b"><code>0c037ed</code></a>
Bump version to 0.17.7 (<a
href="https://redirect.github.com/console-rs/indicatif/issues/589">#589</a>)</li>
<li><a
href="https://github.com/console-rs/indicatif/commit/44610121c8c0343428c12992a5bbf21255d4120b"><code>4461012</code></a>
Fix attempt to subtract with overflow (<a
href="https://redirect.github.com/console-rs/indicatif/issues/582">#582</a>)
(<a
href="https://redirect.github.com/console-rs/indicatif/issues/586">#586</a>)</li>
<li><a
href="https://github.com/console-rs/indicatif/commit/257d3ecc39f60a366bde98c11c4c703f91d53347"><code>257d3ec</code></a>
Bump actions/checkout from 3 to 4</li>
<li><a
href="https://github.com/console-rs/indicatif/commit/40b40d29b6d06ae18c40b829f77e9c43bcebd7af"><code>40b40d2</code></a>
fix unnecessary vec! lint instances</li>
<li><a
href="https://github.com/console-rs/indicatif/commit/a5a8524b4a62ac97229df5beeeff55c928e051fe"><code>a5a8524</code></a>
Tick ProgressTrackers before drawing</li>
<li><a
href="https://github.com/console-rs/indicatif/commit/75fca29bdb9e1164092d2b40d46d9b9c3d9581f1"><code>75fca29</code></a>
Add scheduled CI runs every week</li>
<li><a
href="https://github.com/console-rs/indicatif/commit/c0ea468ac3bd7ab9abab86a3fd3b251f7cef83b8"><code>c0ea468</code></a>
Upgrade to 2021 edition</li>
<li><a
href="https://github.com/console-rs/indicatif/commit/73a67f8e517c64f919ce51ce62e7c5bf3cb95974"><code>73a67f8</code></a>
Bump MSRV to 1.63 for tokio 1.30</li>
<li><a
href="https://github.com/console-rs/indicatif/commit/de090172485c7638a016b984e0c7c54e40919d34"><code>de09017</code></a>
Reorder Cargo metadata fields</li>
<li><a
href="https://github.com/console-rs/indicatif/commit/cee6fd4fcf85c4eda3a6e5dfb555f8a9c6c62edd"><code>cee6fd4</code></a>
Fix a potential overflow with a saturating add.</li>
<li>Additional commits viewable in <a
href="https://github.com/console-rs/indicatif/compare/0.17.6...0.17.7">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=indicatif&package-manager=cargo&previous-version=0.17.6&new-version=0.17.7)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

## Summary
Built on top of the tooling and ideas introduced in
https://github.com/paritytech/polkadot-sdk/pull/2528, this PR introduces
a synthetic benchmark for measuring and assessing the performance
characteristics of the approval-voting and approval-distribution
subsystems.

Currently this allows, us to simulate the behaviours of these systems
based on the following dimensions:
```
TestConfiguration:
# Test 1
- objective: !ApprovalsTest
    last_considered_tranche: 89
    min_coalesce: 1
    max_coalesce: 6
    enable_assignments_v2: true
    send_till_tranche: 60
    stop_when_approved: false
    coalesce_tranche_diff: 12
    workdir_prefix: "/tmp"
    num_no_shows_per_candidate: 0
    approval_distribution_expected_tof: 6.0
    approval_distribution_cpu_ms: 3.0
    approval_voting_cpu_ms: 4.30
  n_validators: 500
  n_cores: 100
  n_included_candidates: 100
  min_pov_size: 1120
  max_pov_size: 5120
  peer_bandwidth: 524288000000
  bandwidth: 524288000000
  latency:
    min_latency:
      secs: 0
      nanos: 1000000
    max_latency:
      secs: 0
      nanos: 100000000
  error: 0
  num_blocks: 10
```

## The approach
1. We build a real overseer with the real implementations for
approval-voting and approval-distribution subsystems.
2. For a given network size, for each validator we pre-computed all
potential assignments and approvals it would send, because this a
computation heavy operation this will be cached on a file on disk and be
re-used if the generation parameters don't change.
3. The messages will be sent accordingly to the configured parameters
and those are split into 3 main benchmarking scenarios.

## Benchmarking scenarios

### Best case scenario *approvals_throughput_best_case.yaml*
It send to the approval-distribution only the minimum required tranche
to gathered the needed_approvals, so that a candidate is approved.

### Behaviour in the presence of no-shows *approvals_no_shows.yaml*
It sends the tranche needed to approve a candidate when we have a
maximum of *num_no_shows_per_candidate* tranches with no-shows for each
candidate.

### Maximum throughput *approvals_throughput.yaml*
It sends all the tranches for each block and measures the used CPU and
necessary network bandwidth. by the approval-voting and
approval-distribution subsystem.

## How to run it
```
cargo run -p polkadot-subsystem-bench --release -- test-sequence --path polkadot/node/subsystem-bench/examples/approvals_throughput.yaml
```

## Evaluating performance
### Use the real subsystems metrics
If you follow the steps in
https://github.com/paritytech/polkadot-sdk/tree/master/polkadot/node/subsystem-bench#install-grafana
for installing locally prometheus and grafana, all real metrics for the
`approval-distribution`, `approval-voting` and overseer are available.
E.g:
<img width="2149" alt="Screenshot 2023-12-05 at 11 07 46"
src="https://github.com/paritytech/polkadot-sdk/assets/49718502/cb8ae2dd-178b-4922-bfa4-dc37e572ed38">

<img width="2551" alt="Screenshot 2023-12-05 at 11 09 42"
src="https://github.com/paritytech/polkadot-sdk/assets/49718502/8b4542ba-88b9-46f9-9b70-cc345366081b">

<img width="2154" alt="Screenshot 2023-12-05 at 11 10 15"
src="https://github.com/paritytech/polkadot-sdk/assets/49718502/b8874d8d-632e-443a-9840-14ad8e90c54f">

<img width="2535" alt="Screenshot 2023-12-05 at 11 10 52"
src="https://github.com/paritytech/polkadot-sdk/assets/49718502/779a439f-fd18-4985-bb80-85d5afad78e2">

### Profile with pyroscope
1. Setup pyroscope following the steps in
https://github.com/paritytech/polkadot-sdk/tree/master/polkadot/node/subsystem-bench#install-pyroscope,
then run any of the benchmark scenario with `--profile` as the
arguments.
2. Open the pyroscope dashboard in grafana, e.g:
<img width="2544" alt="Screenshot 2024-01-09 at 17 09 58"
src="https://github.com/paritytech/polkadot-sdk/assets/49718502/58f50c99-a910-4d20-951a-8b16639303d9">



### Useful  logs
1. Network bandwidth requirements:
```
Payload bytes received from peers: 503993 KiB total, 50399 KiB/block
Payload bytes sent to peers: 629971 KiB total, 62997 KiB/block
```

2. Cpu usage by the approval-distribution/approval-voting subsystems.
```
approval-distribution CPU usage 84.061s
approval-distribution CPU usage per block 8.406s
approval-voting CPU usage 96.532s
approval-voting CPU usage per block 9.653s
```

3. Time passed until a given block is approved
```
 Chain selection approved  after 3500 ms hash=0x0101010101010101010101010101010101010101010101010101010101010101
Chain selection approved  after 4500 ms hash=0x0202020202020202020202020202020202020202020202020202020202020202
```

### Using benchmark to quantify improvements from
https://github.com/paritytech/polkadot-sdk/pull/1178 +
https://github.com/paritytech/polkadot-sdk/pull/1191

Using a versi-node we compare the scenarios where all new optimisations
are disabled with a scenarios where tranche0 assignments are sent in a
single message and a conservative simulation where the coalescing of
approvals gives us just 50% reduction in the number of messages we send.

Overall, what we see is a speedup of around 30-40% in the time it takes
to process the necessary messages and a 30-40% reduction in the
necessary bandwidth.

#### Best case scenario comparison(minimum required tranches sent).
Unoptimised
```
    Number of blocks: 10
    Payload bytes received from peers: 53289 KiB total, 5328 KiB/block
    Payload bytes sent to peers: 52489 KiB total, 5248 KiB/block
    approval-distribution CPU usage 6.732s
    approval-distribution CPU usage per block 0.673s
    approval-voting CPU usage 9.523s
    approval-voting CPU usage per block 0.952s
```

vs Optimisation enabled
```
   Number of blocks: 10
   Payload bytes received from peers: 32141 KiB total, 3214 KiB/block
   Payload bytes sent to peers: 37314 KiB total, 3731 KiB/block
   approval-distribution CPU usage 4.658s
   approval-distribution CPU usage per block 0.466s
   approval-voting CPU usage 6.236s
   approval-voting CPU usage per block 0.624s
```

#### Worst case all tranches sent, very unlikely happens when sharding
breaks.

Unoptimised
```
   Number of blocks: 10
   Payload bytes received from peers: 746393 KiB total, 74639 KiB/block
   Payload bytes sent to peers: 729151 KiB total, 72915 KiB/block
   approval-distribution CPU usage 118.681s
   approval-distribution CPU usage per block 11.868s
   approval-voting CPU usage 124.118s
   approval-voting CPU usage per block 12.412s
```

vs optimised
```
    Number of blocks: 10
    Payload bytes received from peers: 503993 KiB total, 50399 KiB/block
    Payload bytes sent to peers: 629971 KiB total, 62997 KiB/block
    approval-distribution CPU usage 84.061s
    approval-distribution CPU usage per block 8.406s
    approval-voting CPU usage 96.532s
    approval-voting CPU usage per block 9.653s
```


## TODOs
[x] Polish implementation.
[x] Use what we have so far to evaluate
https://github.com/paritytech/polkadot-sdk/pull/1191 before merging.
[x] List of features and additional dimensions we want to use for
benchmarking.
[x] Run benchmark on hardware similar with versi and kusama nodes.
[ ] Add benchmark to be run in CI for catching regression in
performance.
[ ] Rebase on latest changes for network emulation.

---------

Signed-off-by: Andrei Sandu <[email protected]>
Signed-off-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Andrei Sandu <[email protected]>
Co-authored-by: Andrei Sandu <[email protected]>

Bumps [paritytech/review-bot](https://github.com/paritytech/review-bot)
from 2.3.0 to 2.4.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/paritytech/review-bot/releases">paritytech/review-bot's
releases</a>.</em></p>
<blockquote>
<h2>v2.4.0</h2>
<h2>What's Changed</h2>
<ul>
<li>Updated node and dependencies by <a
href="https://github.com/Bullrich"><code>@​Bullrich</code></a> in <a
href="https://redirect.github.com/paritytech/review-bot/pull/111">paritytech/review-bot#111</a></li>
<li>Refactor of failed reviews objects by <a
href="https://github.com/Bullrich"><code>@​Bullrich</code></a> in <a
href="https://redirect.github.com/paritytech/review-bot/pull/112">paritytech/review-bot#112</a></li>
<li>Added required score grouping to fellows reviews by <a
href="https://github.com/Bullrich"><code>@​Bullrich</code></a> in <a
href="https://redirect.github.com/paritytech/review-bot/pull/113">paritytech/review-bot#113</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/paritytech/review-bot/compare/v2.3.1...v2.4.0">https://github.com/paritytech/review-bot/compare/v2.3.1...v2.4.0</a></p>
<h2>v2.3.1</h2>
<h2>What's Changed</h2>
<ul>
<li>Fellows: Added search of super identity by <a
href="https://github.com/Bullrich"><code>@​Bullrich</code></a> in <a
href="https://redirect.github.com/paritytech/review-bot/pull/108">paritytech/review-bot#108</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/paritytech/review-bot/compare/v2.3.0...v2.3.1">https://github.com/paritytech/review-bot/compare/v2.3.0...v2.3.1</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/paritytech/review-bot/commit/280018363a131c5b59fcdb9c6f1a85a50bdb31e9"><code>2800183</code></a>
Added required score grouping to fellows reviews (<a
href="https://redirect.github.com/paritytech/review-bot/issues/113">#113</a>)</li>
<li><a
href="https://github.com/paritytech/review-bot/commit/53718073fee3b3af31a9d1bba9c900d989699e55"><code>5371807</code></a>
Refactor of failed reviews objects (<a
href="https://redirect.github.com/paritytech/review-bot/issues/112">#112</a>)</li>
<li><a
href="https://github.com/paritytech/review-bot/commit/5f58f48fed7d174d382989940cbbf47dbd5ee41e"><code>5f58f48</code></a>
Updated node and dependencies (<a
href="https://redirect.github.com/paritytech/review-bot/issues/111">#111</a>)</li>
<li><a
href="https://github.com/paritytech/review-bot/commit/4ea00441b921cfdbbd47dcd95f1f6e3e0ab0b691"><code>4ea0044</code></a>
Fellows: Added search of super identity (<a
href="https://redirect.github.com/paritytech/review-bot/issues/108">#108</a>)</li>
<li>See full diff in <a
href="https://github.com/paritytech/review-bot/compare/v2.3.0...v2.4.0">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=paritytech/review-bot&package-manager=github_actions&previous-version=2.3.0&new-version=2.4.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

This allows to build a custom version of `spawn_tasks` with less
copy-paste required.

Resolves https://github.com/paritytech/polkadot-sdk/issues/2110

---------

Co-authored-by: Bastian Köcher <[email protected]>

Can this API be marked stable? Implemented in [solang
here](https://github.com/hyperledger/solang/pull/1620)

---------

Signed-off-by: Cyrill Leutwiler <[email protected]>

This PR adds initial support for building RISC-V runtimes targeting
PolkaVM.

- Setting the `SUBSTRATE_RUNTIME_TARGET=riscv` environment variable will
now build a RISC-V runtime instead of a WASM runtime.
- This only adds support for *building* runtimes; running them will need
a PolkaVM-based executor, which I will add in a future PR.
- Only building the minimal runtime is supported (building the Polkadot
runtime doesn't work *yet* due to one of the dependencies).
- The builder now sets a `substrate_runtime` cfg flag when building the
runtimes, with the idea being that instead of doing `#[cfg(not(feature =
"std"))]` or `#[cfg(target_arch = "wasm32")]` to detect that we're
building a runtime you'll do `#[cfg(substrate_runtime)]`. (Switching the
whole codebase to use this will be done in a future PR; I deliberately
didn't do this here to keep this PR minimal and reviewable.)
- Further renaming of things (e.g. types, environment variables and proc
macro attributes having "wasm" in their name) to be target-agnostic will
also be done in a future refactoring PR (while keeping backwards
compatibility where it makes sense; I don't intend to break anyone's
workflow or create unnecessary churn).
- This PR also fixes two bugs in the `wasm-builder` crate:
* The `RUSTC` environment variable is now removed when invoking the
compiler. This prevents the toolchain version from being overridden when
called from a `build.rs` script.
* When parsing the `rustup toolchain list` output the `(default)` is now
properly stripped and not treated as part of the version.
- I've also added a minimal CI job that makes sure this doesn't break in
the future. (cc @paritytech/ci)

cc @athei



------

Also, just a fun little tidbit: quickly comparing the size of the built
runtimes it seems that the PolkaVM runtime is slightly smaller than the
WASM one. (`production` build, with the `names` section substracted from
the WASM's size to keep things fair, since for the PolkaVM runtime we're
currently stripping out everything)

- `.wasm`: 625505 bytes
- `.wasm` (after wasm-opt -O3): 563205 bytes
- `.wasm` (after wasm-opt -Os): 562987 bytes
- `.wasm` (after wasm-opt -Oz): 536852 bytes
- `.polkavm`: ~~580338 bytes~~ 550476 bytes (after enabling extra target
features; I'll add those in another PR once we have an executor working)

---------

Co-authored-by: Bastian Köcher <[email protected]>

Bumps [wasmi](https://github.com/paritytech/wasmi) from 0.31.0 to
0.31.2.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/paritytech/wasmi/releases">wasmi's
releases</a>.</em></p>
<blockquote>
<h2>v0.31.1 - 2023-12-01</h2>
<h3>Fixes</h3>
<ul>
<li>Fixed a bug, in the <code>wasmi</code> engine executor, that causes
an out of bounds buffer write when calling or resuming a Wasm function
with a high number of parameters from the host side.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/paritytech/wasmi/blob/master/CHANGELOG.md">wasmi's
changelog</a>.</em></p>
<blockquote>
<h1>Changelog</h1>
<p>All notable changes to this project will be documented in this
file.</p>
<p>The format is loosely based on <a
href="https://keepachangelog.com/en/1.0.0/">Keep a Changelog</a>,
and this project adheres to <a
href="https://semver.org/spec/v2.0.0.html">Semantic Versioning</a>.
Additionally we have an <code>Internal</code> section for changes that
are of interest to developers.</p>
<p>Dates in this file are formattes as <code>YYYY-MM-DD</code>.</p>
<h2>[<code>0.32.0-beta.5</code>] - 2024-01-15</h2>
<p><strong>Note:</strong></p>
<ul>
<li>This is the beta of the upcoming <code>v0.32.0</code> release.
This version is not production ready yet and might contain serious bugs.
Please use this only for experimentation or at your own risk.</li>
<li>Performance tests indicated that the new register-machine bytecode
based
Wasmi engine performance is very sensitive to hardware or OS specifics
which may lead to very different performance characteristics.
<ul>
<li>We are working on fixing this until the stable release.</li>
<li>Measurements concluded that execution performance can be equal or
sometimes
even surpass Wasm3 execution performance.</li>
</ul>
</li>
</ul>
<h3>Added</h3>
<ul>
<li>Added a new execution engine based on register-machine bytecode. (<a
href="https://redirect.github.com/paritytech/wasmi/pull/729">paritytech/wasmi#729</a>)
<ul>
<li>The register-machine Wasmi <code>Engine</code> executes roughly
80-100% faster and
compiles roughly 30% slower according to benchmarks conducted so
far.</li>
</ul>
</li>
<li>Added <code>Module::new_unchecked</code> API. (<a
href="https://redirect.github.com/paritytech/wasmi/pull/829">paritytech/wasmi#829</a>)
<ul>
<li>This allows to compile a Wasm module without Wasm validation which
can be useful
when users know that their inputs are valid Wasm binaries.</li>
<li>This improves Wasm compilation performance for faster startup times
by roughly 10-20%.</li>
</ul>
</li>
<li>Added Wasm compilation modes. (<a
href="https://redirect.github.com/paritytech/wasmi/pull/844">paritytech/wasmi#844</a>)
<ul>
<li>When using <code>Module::new</code> Wasmi eagerly compiles Wasm
bytecode into Wasmi bytecode
which is optimized for efficient execution. However, this compilation
can become very
costly especially for large Wasm binaries.</li>
<li>The solution to this problem is to introduce new compilation modes,
namely:
<ul>
<li><code>CompilationMode::Eager</code>: Eager compilation, what Wasmi
did so far. (default)</li>
<li><code>CompilationMode::LazyTranslation</code>: Eager Wasm validation
and lazy Wasm translation.</li>
<li><code>CompilationMode::Lazy</code>: Lazy Wasm validation and
translation.</li>
</ul>
</li>
<li>Benchmarks concluded that
<ul>
<li><code>CompilationMode::LazyTanslation</code>: Usually improves
startup performance by a factor of 2 to 3.</li>
<li><code>CompilationMode::Lazy</code>: Usually improves startup
performance by a factor of up to 27.</li>
</ul>
</li>
<li>Note that <code>CompilationMode::Lazy</code> can lead to partially
validated Wasm modules
which can introduce non-determinism when using different Wasm
implementations.
Therefore users should know what they are doing when using
<code>CompilationMode::Lazy</code> if this is a concern.</li>
<li>Enable lazy Wasm compilation with:
<pre lang="rust"><code>let mut config = wasmi::Config::default();
</code></pre>
</li>
</ul>
</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/paritytech/wasmi/commit/0218dfc74b4c4a83261d46d90ac83fb513fd6b3f"><code>0218dfc</code></a>
Fix <code>InstanceCache</code> bug (<a
href="https://redirect.github.com/paritytech/wasmi/issues/904">#904</a>)</li>
<li><a
href="https://github.com/paritytech/wasmi/commit/3fd0cc2b2d7b7a55142e6a6cffffbe4212ed00ae"><code>3fd0cc2</code></a>
Bump <code>wasmi_arena</code> version (<a
href="https://redirect.github.com/paritytech/wasmi/issues/903">#903</a>)</li>
<li><a
href="https://github.com/paritytech/wasmi/commit/86c874029eba5067f4ecd01bc3c4f6dacab5a16e"><code>86c8740</code></a>
Fix <code>Sync</code> impl bug in <code>wasmi_arena</code> crate (<a
href="https://redirect.github.com/paritytech/wasmi/issues/902">#902</a>)</li>
<li><a
href="https://github.com/paritytech/wasmi/commit/27def282b06613e770d0ab96de88b9909973a12b"><code>27def28</code></a>
Bump actions/cache from 3 to 4 (<a
href="https://redirect.github.com/paritytech/wasmi/issues/900">#900</a>)</li>
<li><a
href="https://github.com/paritytech/wasmi/commit/59f9acc4776c09a35c6d563609de6818e9b65084"><code>59f9acc</code></a>
Fix typos (<a
href="https://redirect.github.com/paritytech/wasmi/issues/899">#899</a>)</li>
<li><a
href="https://github.com/paritytech/wasmi/commit/4c06acd816ccde6f45f9cc16aac4e18d36066054"><code>4c06acd</code></a>
Update and improve Wasmi's readme (<a
href="https://redirect.github.com/paritytech/wasmi/issues/898">#898</a>)</li>
<li><a
href="https://github.com/paritytech/wasmi/commit/2354a20ecc5e4209af2ba7458a8c383789ad8b4f"><code>2354a20</code></a>
Prepare release for Wasmi <code>v0.32.0 beta.5</code> (<a
href="https://redirect.github.com/paritytech/wasmi/issues/893">#893</a>)</li>
<li><a
href="https://github.com/paritytech/wasmi/commit/a4dc251bf066c362a2fc6acf00da924659894c6d"><code>a4dc251</code></a>
Fix heap buffer overflow due to Wasmi codegen bug (<a
href="https://redirect.github.com/paritytech/wasmi/issues/892">#892</a>)</li>
<li><a
href="https://github.com/paritytech/wasmi/commit/e60da4979009370cb1149b29dbb612886854efa9"><code>e60da49</code></a>
Add CI test job using LLVM's Address Sanitizer (<a
href="https://redirect.github.com/paritytech/wasmi/issues/891">#891</a>)</li>
<li><a
href="https://github.com/paritytech/wasmi/commit/28c770ac9623d78ce10c67d9bec013e0d3a43bcb"><code>28c770a</code></a>
Prepare release for Wasmi <code>v0.32.0-beta.4</code> (<a
href="https://redirect.github.com/paritytech/wasmi/issues/889">#889</a>)</li>
<li>Additional commits viewable in <a
href="https://github.com/paritytech/wasmi/compare/v0.31.0...v0.31.2">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=wasmi&package-manager=cargo&previous-version=0.31.0&new-version=0.31.2)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

This change is mainly for people running the local variants. They can
directly start with async backing.

---------

Signed-off-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>

The PR contains small fixes for:
* A test `HostConfig v11` storage migration - v11 was compared with
itself instead of with `v10`.
* Outdated comment for `ClaimQueue`
* Typos

Removes the `bridges/snowbridge/parachain` directory and moves
everything up to under `snowbridge` directly. We are cleaning up our
local dev env after merging our crates into the polkadot-sdk.

---------

Co-authored-by: claravanstaden <Cats 4 life!>