Commits · d941784b397517a9e03e0e260450bfb9f7724fbf · parity / Mirrored projects / polkadot-sdk

Dec 18, 2023

Relaxed clippy fixes/nits (#2661) · d941784b

Branislav Kontur authored Dec 18, 2023



This PR contains just a few clippy fixes and nits, which are, however,
relaxed by workspace clippy settings here:
https://github.com/paritytech/polkadot-sdk/blob/master/Cargo.toml#L483-L506

---------

Co-authored-by: Dmitry Sinyavin <[email protected]>
Co-authored-by: ordian <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Bastian Köcher <[email protected]>

d941784b

Dec 16, 2023

Publicly expose inaccessible `pallet_uniques` state (#2727) · 64d52f22

Sergej Sakac authored Dec 16, 2023

A small PR to publicly expose the `pallet_uniques` state that is not
accessible through the nonfungibles implementation.

Currently, this state is unreachable from chain extensions.

64d52f22

Dec 15, 2023

[NPoS] Remove better solution threshold for unsigned submissions (#2694) · ffb2125f

Ankan authored Dec 15, 2023

closes https://github.com/paritytech-secops/srlabs_findings/issues/78.

Removes `BetterUnsignedThreshold` from pallet EPM. This will essentially
mean any solution submitted by the validator that is strictly better
than the current queued solution would be accepted.

The reason for having these thresholds is to limit number of solutions
submitted on-chain. However for unsigned submissions, the number of
solutions that could be submitted on average is limited even without
thresholding (calculation shown in the corresponding issue).

ffb2125f

Feature gate `do_task` in `frame_system` (#2707) · 11edbaf6

gupnik authored Dec 15, 2023

https://github.com/paritytech/polkadot-sdk/pull/1343/ introduced Tasks
API. This one moves `do_task` call in frame_system under the
experimental flag, till the previous one is audited.

---------

Co-authored-by: command-bot <>

11edbaf6

Dec 14, 2023

pallet-nomination-pools: Enable function for `fuzzing` feature as well (#2711) · 6dece52e

Bastian Köcher authored Dec 14, 2023

The function is called by `do_try_state` which is also enabled for the
`fuzzing` feature.

---------

Co-authored-by: command-bot <>

6dece52e

Bump the known_good_semver group with 1 update (#2698) · 19984f22

dependabot[bot] authored Dec 14, 2023



Bumps the known_good_semver group with 1 update:
[syn](https://github.com/dtolnay/syn).

Updates `syn` from 2.0.40 to 2.0.41
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/syn/releases">syn's
releases</a>.</em></p>
<blockquote>
<h2>2.0.41</h2>
<ul>
<li>Support parsing syn::Field in <code>parse_quote!</code> (<a
href="https://redirect.github.com/dtolnay/syn/issues/1548">#1548</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/syn/commit/63b17012ab20ff72f3e49aaf821719a866b1a352"><code>63b1701</code></a>
Release 2.0.41</li>
<li><a
href="https://github.com/dtolnay/syn/commit/920ab7d6a061921d03541d86d7ac8daaf864bb7b"><code>920ab7d</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1548">#1548</a>
from dtolnay/parsequotefield</li>
<li><a
href="https://github.com/dtolnay/syn/commit/5e1592408c3bcda68db10cd054f9d87e9e480f9b"><code>5e15924</code></a>
Test parse_quote implementation for Field</li>
<li><a
href="https://github.com/dtolnay/syn/commit/c268c6793f8a71ac2f3e8ee80201701e4352b407"><code>c268c67</code></a>
Support parsing Field in parse_quote</li>
<li><a
href="https://github.com/dtolnay/syn/commit/2ab0f6ae4b47d133c828d9123e86a50565a95447"><code>2ab0f6a</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1547">#1547</a>
from dtolnay/testparsequote</li>
<li><a
href="https://github.com/dtolnay/syn/commit/46172a41a478920ff23c9e370a5b922fa984829d"><code>46172a4</code></a>
Add parse_quote tests</li>
<li><a
href="https://github.com/dtolnay/syn/commit/0fcdad044f330f4c32e2f3b1230271669d1951ea"><code>0fcdad0</code></a>
Support punctuated Pairs iterator in snapshot tests</li>
<li><a
href="https://github.com/dtolnay/syn/commit/06161ba80283edf6f741dfc86c91f6985297d168"><code>06161ba</code></a>
Update test suite to nightly-2023-12-12</li>
<li>See full diff in <a
href="https://github.com/dtolnay/syn/compare/2.0.40...2.0.41">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=syn&package-manager=cargo&previous-version=2.0.40&new-version=2.0.41)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

19984f22

Add FungibleAdapter (#2684) · 10a91f82

Francisco Aguirre authored Dec 14, 2023

In the move from the old `Currency` traits to the new `fungible/s`
family of traits, we already had the `FungiblesAdapter` and
`NonFungiblesAdapter` for multiple fungible and non fungible assets
respectively. However, for handling only one fungible asset, we were
missing a `FungibleAdapter`, and so used the old `CurrencyAdapter`
instead. This PR aims to fill in that gap, and provide the new adapter
for more updated examples.

I marked the old `CurrencyAdapter` as deprecated as part of this PR, and
I'll change it to the new `FungibleAdapter` in a following PR.
The two stages are separated so as to not bloat this PR with some name
fixes in tests.

---------

Co-authored-by: command-bot <>

10a91f82

Add dummy impls of `fungible` and `fungibles` trait families (#2695) · c1a5fac2

Francisco Aguirre authored Dec 14, 2023

In `Currency`, we have a dummy impl that we can use for mocks or
examples where we only want to satisfy the trait bounds. I added the
same dummy implementations to `fungible` and `fungibles` regular traits.

---------

Co-authored-by: command-bot <>

c1a5fac2

Dec 13, 2023

[Staking] Adds a round check at signed solution submission (#2690) · cc846cc2

Gonçalo Pestana authored Dec 13, 2023

This PR adds a round check to the `Call::submit` extrinsic to make sure
that the solution submission has been prepared for the current election
round and avoid penalties for delayed submissions.

Related to
https://github.com/paritytech-secops/srlabs_findings/issues/329

---------

Co-authored-by: command-bot <>

cc846cc2

Set clippy lints in workspace (requires rust 1.74) (#2390) · be8e6268

Squirrel authored Dec 13, 2023



We currently use a bit of a hack in `.cargo/config` to make sure that
clippy isn't too annoying by specifying the list of lints.

There is now a stable way to define lints for a workspace. The only down
side is that every crate seems to have to opt into this so there's a
*few* files modified in this PR.

Dependencies:

- [x] PR that upgrades CI to use rust 1.74 is merged.

---------

Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>

be8e6268

Fixes parsing for config attrs in pallet macros (#2677) · bc82eb6e
gupnik authored Dec 13, 2023

bc82eb6e

Dec 12, 2023

[ci] Add `-D warnings` for `cargo-check-each-crate` job to fail on warnings (#2670) · d18a682b

Branislav Kontur authored Dec 12, 2023

## Summary

This PR turns on `-D warnings` for `cargo-check-each-crate job` job to
fail on warnings e.g. like this:
https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4673130

Before this PR, there was a warning and `cargo-check-each-crate` job did
not fail:
https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4641444
```
warning: unused import: `ToTokens`
  --> substrate/primitives/api/proc-macro/src/utils.rs:22:34
   |
22 | use quote::{format_ident, quote, ToTokens};
   |                                  ^^^^^^^^
   |
   = note: `#[warn(unused_imports)]` on by default
warning: `sp-api-proc-macro` (lib) generated 1 warning (run `cargo fix --lib -p sp-api-proc-macro` to apply 1 suggestion)
```

Fixes on the way:
https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4641444
https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4673265
https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4673410
https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4673681
https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4673836
https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4673941
https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4674256
https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4679328



## Questions
- [ ] why does this check triggers only `cargo check --locked`?
`--all-features` or `--all-targets` are not needed? Or aren't they
avoided intentionally?

---------

Co-authored-by: command-bot <>

d18a682b

pallet-uniques: Move migration over to `VersionedMigration` (#2687) · ef62acfb
Bastian Köcher authored Dec 12, 2023

ef62acfb

Staking: Add `deprecate_controller_batch` AdminOrigin call (#2589) · 048a9c27

Ross Bulat authored Dec 12, 2023



Partially Addresses #2500

Adds a `deprecate_controller_batch` call to the staking pallet that is
callable by `Root` and `StakingAdmin`. To be used for controller account
deprecation and removed thereafter. Adds
`MaxControllersDeprecationBatch` pallet constant that defines max
possible deprecations per call.

- [x] Add `deprecate_controller_batch` call, and
`MaxControllersInDeprecationBatch` constant.
- [x] Add tests, benchmark, weights. Tests that weight is only consumed
if unique pair.
- [x] Adds `StakingAdmin` origin to staking's `AdminOrigin` type in
westend runtime.
- [x] Determined that worst case 5,900 deprecations does fit into
`maxBlock` `proofSize` and `refTime` in both normal and operational
thresholds, meaning we can deprecate all controllers for each network in
one call.

## Block Weights

By querying `consts.system.blockWeights` we can see that the
`deprecate_controller_batch` weights fit within the `normal` threshold
on Polkadot.

#### `controller_deprecation_batch` where i = 5900:
#### Ref time: 69,933,325,300
#### Proof size: 21,040,390

### Polkadot 

```
// consts.query.blockWeights

maxBlock: {
        refTime: 2,000,000,000,000
        proofSize: 18,446,744,073,709,551,615
}
normal: {
 maxExtrinsic: {
	refTime: 1,479,873,955,000
	proofSize: 13,650,590,614,545,068,195
 }
 maxTotal: {
	refTime: 1,500,000,000,000
	proofSize: 13,835,058,055,282,163,711
 }
}
```

### Kusama

```
// consts.query.blockWeights

  maxBlock: {
    refTime: 2,000,000,000,000
    proofSize: 18,446,744,073,709,551,615
  }
    normal: {
      maxExtrinsic: {
        refTime: 1,479,875,294,000
        proofSize: 13,650,590,614,545,068,195
      }
      maxTotal: {
        refTime: 1,500,000,000,000
        proofSize: 13,835,058,055,282,163,711
      }
}
```

---------

Co-authored-by: command-bot <>
Co-authored-by: Gonçalo Pestana <[email protected]>

048a9c27

Dec 11, 2023

pallet-vesting: Configurable block number provider (#2403) · c2d45e7e

Gabriel Facco de Arruda authored Dec 11, 2023



This PR makes the block number provider configurable through the Config
trait in pallet-vesting, this gives parachains the option to use the
relay chain block number provider from ParachainSystem.

---------

Co-authored-by: Bastian Köcher <[email protected]>

c2d45e7e

Bump the known_good_semver group with 2 updates (#2675) · 7b416d84

dependabot[bot] authored Dec 11, 2023



Bumps the known_good_semver group with 2 updates:
[clap](https://github.com/clap-rs/clap) and
[syn](https://github.com/dtolnay/syn).

Updates `clap` from 4.4.10 to 4.4.11
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/releases">clap's
releases</a>.</em></p>
<blockquote>
<h2>v4.4.11</h2>
<h2>[4.4.11] - 2023-12-04</h2>
<h3>Features</h3>
<ul>
<li>Add <code>Command::mut_group</code></li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.4.11] - 2023-12-04</h2>
<h3>Features</h3>
<ul>
<li>Add <code>Command::mut_group</code></li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/d092896d61fd73a5467db85eac035a9ce2ddbc60"><code>d092896</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/c76a713f8bd40a54a58e8c1d2300a6792f1b79d5"><code>c76a713</code></a>
chore: Update lockfile</li>
<li><a
href="https://github.com/clap-rs/clap/commit/b99d17bb0b78b667659982252e8973174e93ae7d"><code>b99d17b</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/b47f8da4d857dd653915ce772757d4b996a36477"><code>b47f8da</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5247">#5247</a>
from epage/group</li>
<li><a
href="https://github.com/clap-rs/clap/commit/2e7c9d11a84b5008e2b42b4df323557a31bb0337"><code>2e7c9d1</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5194">#5194</a>
from c19/patch-1</li>
<li><a
href="https://github.com/clap-rs/clap/commit/37917be0b75d5cd667cd37db6ea5c6bac837c674"><code>37917be</code></a>
feat: Add Command::mut_group</li>
<li><a
href="https://github.com/clap-rs/clap/commit/cf7a0272cc1d55d139983d4408e8bedab51338ad"><code>cf7a027</code></a>
chore: Update from '_rust/main'</li>
<li><a
href="https://github.com/clap-rs/clap/commit/8c836eaa9d9279df467991a3b8463d748b515a0a"><code>8c836ea</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/10">#10</a> from
epage/renovate/migrate-config</li>
<li><a
href="https://github.com/clap-rs/clap/commit/598c6244983fb392457f3fbec9badf25fab6d051"><code>598c624</code></a>
chore(config): migrate config .github/renovate.json5</li>
<li>See full diff in <a
href="https://github.com/clap-rs/clap/compare/v4.4.10...v4.4.11">compare
view</a></li>
</ul>
</details>
<br />

Updates `syn` from 2.0.39 to 2.0.40
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/syn/releases">syn's
releases</a>.</em></p>
<blockquote>
<h2>2.0.40</h2>
<ul>
<li>Fix some edge cases of handling None-delimited groups in expression
parser (<a
href="https://redirect.github.com/dtolnay/syn/issues/1539">#1539</a>, <a
href="https://redirect.github.com/dtolnay/syn/issues/1541">#1541</a>, <a
href="https://redirect.github.com/dtolnay/syn/issues/1542">#1542</a>, <a
href="https://redirect.github.com/dtolnay/syn/issues/1543">#1543</a>, <a
href="https://redirect.github.com/dtolnay/syn/issues/1544">#1544</a>, <a
href="https://redirect.github.com/dtolnay/syn/issues/1545">#1545</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/syn/commit/cf7f40a96a7329fb4215a7a1d8d9e7c93439b169"><code>cf7f40a</code></a>
Release 2.0.40</li>
<li><a
href="https://github.com/dtolnay/syn/commit/1ce8ccf5cd92824d1058019c0ae95b0616f6ac01"><code>1ce8ccf</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1538">#1538</a>
from dtolnay/testinvisible</li>
<li><a
href="https://github.com/dtolnay/syn/commit/d06bff8883e794c0d9d5fe2998210dec113b6eff"><code>d06bff8</code></a>
Add test for parsing Delimiter::None in expressions</li>
<li><a
href="https://github.com/dtolnay/syn/commit/9ec66d42bba0da0041ab6448604b72f673e185f1"><code>9ec66d4</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1545">#1545</a>
from dtolnay/groupedlet</li>
<li><a
href="https://github.com/dtolnay/syn/commit/384621acc640779ee4a8250317c26a42e8ceef90"><code>384621a</code></a>
Fix None-delimited let expression in stmt position</li>
<li><a
href="https://github.com/dtolnay/syn/commit/5325b6d1711c1c9c6787cb6239b472b5f8b5daaf"><code>5325b6d</code></a>
Add test of let expr surrounded in None-delimited group</li>
<li><a
href="https://github.com/dtolnay/syn/commit/0ddfc27cf79573db0b5533c583ff895e9c7f3f72"><code>0ddfc27</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1544">#1544</a>
from dtolnay/nonedelimloop</li>
<li><a
href="https://github.com/dtolnay/syn/commit/9c99b3f62ecebb2ac22f8ed99039934b0a18d0e6"><code>9c99b3f</code></a>
Fix stmt boundary after None-delimited group containing loop</li>
<li><a
href="https://github.com/dtolnay/syn/commit/2781584ea868cce6c9ae750bc442e3b4b2dfd887"><code>2781584</code></a>
Add test of None-delimited group containing loop in match arm</li>
<li><a
href="https://github.com/dtolnay/syn/commit/d33292808432c8530b53c951f2780d7128c4bd0b"><code>d332928</code></a>
Simplify token stream construction in Delimiter::None tests</li>
<li>Additional commits viewable in <a
href="https://github.com/dtolnay/syn/compare/2.0.39...2.0.40">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

7b416d84

Dec 10, 2023

[ci] fix test-frame-ui job (#2672) · e5dc8ed8

Alexandru Gheorghe authored Dec 10, 2023



The test frame ui started failing consistently on latest master [1]. I
assume it was because of a race between
https://github.com/paritytech/polkadot-sdk/pull/1343 which introduced
this warning and a PR that updated our tooling version, hence the
warnings don't match perfectly, so regenerated them with
`TRYBUILD=overwrite` as the test suggests.

[1] https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4666766

---------

Signed-off-by: Alexandru Gheorghe <[email protected]>

e5dc8ed8

Dec 08, 2023

Update proc-macro-crate (#2660) · f6ae1458
Bastian Köcher authored Dec 08, 2023

f6ae1458

Westend: Fellowship Treasury (#2532) · da40d97a

Muharem Ismailov authored Dec 08, 2023

Treasury Pallet Instance for the Fellowship in Westend Collectives.

In this update, we present a Treasury Pallet Instance that is under the
control of the Fellowship body, with oversight from the Root and
Treasurer origins. Here's how it is governed:
- the Root origin have the authority to reject or approve spend
proposals, with no amount limit for approvals.
- the Treasurer origin have the authority to reject or approve spend
proposals, with approval limits of up to 10,000,000 DOT.
- Voice of all Fellows ranked at 3 or above can reject or approve spend
proposals, with a maximum approval limit of 10,000 DOT.
- Voice of Fellows ranked at 4 or above can also reject or approve spend
proposals, with a maximum approval limit of 10,000,000 DOT.

Additionally, we introduce the Asset Rate Pallet Instance to establish
conversion rates from asset A to B. This is used to determine if a
proposed spend amount involving a non-native asset is permissible by the
comm...

da40d97a

[NTFs] Emit CollectionMaxSupplySet on collection create (#2626) · 1bdfb295
Jegor Sidorenko authored Dec 08, 2023
```
Closes #2293 

if the max_supply is set during the collection creation, we emit the
`CollectionMaxSupplySet` event
```
1bdfb295

Tasks: general system for recognizing and executing service work (#1343) · ac3f14d2

Sam Johnson authored Dec 08, 2023



`polkadot-sdk` version of original tasks PR located here:
https://github.com/paritytech/substrate/pull/14329

Fixes #206

## Status
- [x] Generic `Task` trait
- [x] `RuntimeTask` aggregated enum, compatible with
`construct_runtime!`
- [x] Casting between `Task` and `RuntimeTask` without needing `dyn` or
`Box`
- [x] Tasks Example pallet
- [x] Runtime tests for Tasks example pallet
- [x] Parsing for task-related macros
- [x] Retrofit parsing to make macros optional
- [x] Expansion for task-related macros
- [x] Adds support for args in tasks
- [x] Retrofit tasks example pallet to use macros instead of manual
syntax
- [x] Weights
- [x] Cleanup
- [x] UI tests
- [x] Docs

## Target Syntax
Adapted from
https://github.com/paritytech/polkadot-sdk/issues/206#issue-1865172283

```rust
// NOTE: this enum is optional and is auto-generated by the other macros if not present
#[pallet::task]
pub enum Task<T: Config> {
    AddNumberIntoTotal {
        i: u32,
    }
}

/// Some running total.
#[pallet::storage]
pub(super) type Total<T: Config<I>, I: 'static = ()> =
StorageValue<_, (u32, u32), ValueQuery>;

/// Numbers to be added into the total.
#[pallet::storage]
pub(super) type Numbers<T: Config<I>, I: 'static = ()> =
StorageMap<_, Twox64Concat, u32, u32, OptionQuery>;

#[pallet::tasks_experimental]
impl<T: Config<I>, I: 'static> Pallet<T, I> {
	/// Add a pair of numbers into the totals and remove them.
	#[pallet::task_list(Numbers::<T, I>::iter_keys())]
	#[pallet::task_condition(|i| Numbers::<T, I>::contains_key(i))]
	#[pallet::task_index(0)]
	pub fn add_number_into_total(i: u32) -> DispatchResult {
		let v = Numbers::<T, I>::take(i).ok_or(Error::<T, I>::NotFound)?;
		Total::<T, I>::mutate(|(total_keys, total_values)| {
			*total_keys += i;
			*total_values += v;
		});
		Ok(())
	}
}
```

---------

Co-authored-by: Nikhil Gupta <[email protected]>
Co-authored-by: kianenigma <[email protected]>
Co-authored-by: Nikhil Gupta <>
Co-authored-by: Gavin Wood <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: gupnik <[email protected]>

ac3f14d2

pallet-broker: Small improvements to the origin checks (#2656) · fde5d8fe
Bastian Köcher authored Dec 08, 2023
```
The permissionless calls do not need to ensure that the `origin` is
signed. Anyone can execute these calls.
```
fde5d8fe

Dec 07, 2023

[FRAME] Make MQ pallet re-entrancy safe (#2356) · 7e7fe990

Oliver Tale-Yazdi authored Dec 07, 2023



Closes https://github.com/paritytech/polkadot-sdk/issues/2319

Changes:
- Ensure that only `enqueue_message(s)` is callable from within the
message processor. This prevents messed up storage that can currently
happen when the pallet is called into recursively.
- Use `H256` instead of `[u8; 32]` for clearer API.

## Details

The re-entracy check is done with the `environmental` crate by adding a
`with_service_mutex(f)` function that runs the closure exclusively. This
works since the MQ pallet is not instantiable.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>

7e7fe990

Improve inline comment for ClaimPermission extrinsic of nom pools (#2640) · 26116cdb
Anwesh authored Dec 07, 2023

26116cdb

[ci] Update rust to 1.74 (#2545) · cd63276d

Alexander Samusev authored Dec 07, 2023



cc https://github.com/paritytech/ci_cd/issues/900

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Dónal Murray <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: command-bot <>

cd63276d

Dec 06, 2023

pallet-xcm: add new flexible `transfer_assets()` call/extrinsic (#2388) · e7651cf4

Adrian Catangiu authored Dec 06, 2023

# Motivation (+testing)

### Enable easy `ForeignAssets` transfers using `pallet-xcm` 

We had just previously added capabilities to teleport fees during
reserve-based transfers, but what about reserve-transferring fees when
needing to teleport some non-fee asset?

This PR aligns everything under either explicit reserve-transfer,
explicit teleport, or this new flexible `transfer_assets()` which can
mix and match as needed with fewer artificial constraints imposed to the
user.

This will enable, for example, a (non-system) parachain to teleport
their `ForeignAssets` assets to AssetHub while using DOT to pay fees.
(the assets are teleported - as foreign assets should from their owner
chain - while DOT used for fees can only be reserve-based transferred
between said parachain and AssetHub).

Added `xcm-emulator` tests for this scenario ^.

# Description

Reverts `(limited_)reserve_transfer_assets` to only allow reserve-based
transfers for all `assets` including fees.

Similarly `(limited_)teleport_assets` only allows teleports for all
`assets` including fees.
    
For complex combinations of asset transfers where assets and fees may
have different reserves or different reserve/teleport trust
configurations, users can use the newly added `transfer_assets()`
extrinsic which is more flexible in allowing more complex scenarios.

`assets` (excluding `fees`) must have same reserve location or otherwise
be teleportable to `dest`.
No limitations imposed on `fees`.

- for local reserve: transfer assets to sovereign account of destination
chain and forward a notification XCM to `dest` to mint and deposit
reserve-based assets to `beneficiary`.
- for destination reserve: burn local assets and forward a notification
to `dest` chain to withdraw the reserve assets from this chain's
sovereign account and deposit them to `beneficiary`.
- for remote reserve: burn local assets, forward XCM to reserve chain to
move reserves from this chain's SA to `dest` chain's SA, and forward
another XCM to `dest` to mint and deposit reserve-based assets to
`beneficiary`.
- for teleports: burn local assets and forward XCM to `dest` chain to
mint/teleport assets and deposit them to `beneficiary`.

## Review notes

Only around 500 lines are prod code (see `pallet_xcm/src/lib.rs`), the
rest of the PR is new tests and improving existing tests.

---------

Co-authored-by: command-bot <>

e7651cf4

sp-core: Rename VrfOutput to VrfPreOutput (#2534) · 1f023dea

André Silva authored Dec 06, 2023

This will make more sense after
https://github.com/paritytech/polkadot-sdk/pull/2524 since the
schnorrkel type for VRF outputs is also renamed in the latest version.
Can be reviewed independently though.

Can be merged after https://github.com/paritytech/polkadot-sdk/pull/1577
so that there is less pain for @davxy

.

---------

Co-authored-by: Bastian Köcher <[email protected]>

1f023dea

Dec 05, 2023

Move `developer-hub` to `polkadot-sdk-docs` (#2598) · a310df26

juangirini authored Dec 05, 2023



This PR is a continuation of
https://github.com/paritytech/polkadot-sdk/pull/2102 and part of an
initiative started here https://hackmd.io/@romanp/rJ318ZCEp
What has been done:
- The content under `docs/*` (with the exception of `docs/mermaid`) has
been moved to `docs/contributor/`
- Developer Hub has been renamed to Polkadot SDK Docs, and the crate has
been renamed from `developer-hub` to `polkadot-sdk-docs`
- The content under `developer-hub/*` has been moved to `docs/sdk`

---
Original PR https://github.com/paritytech/polkadot-sdk/pull/2565, it has
been close due to too many rebase conflicts

---------

Co-authored-by: Serban Iorga <[email protected]>
Co-authored-by: Chevdor <[email protected]>
Co-authored-by: Egor_P <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

a310df26

Adds derive_impl to relay-chain and parachain runtimes (#2476) · 6bab88c6
gupnik authored Dec 05, 2023

6bab88c6

Dec 04, 2023

pallet-ranked-collective: Ensure to cleanup state in `remove_member` (#2591) · a1b2ecb9

Bastian Köcher authored Dec 04, 2023



This ensures that we cleanup the state of `who` in `remove_member`.

---------

Co-authored-by: Liam Aharon <[email protected]>

a1b2ecb9

contracts-fixtures: Do not assume that `rustup` is installed (#2586) · aa4754e3

Bastian Köcher authored Dec 04, 2023

The build script was assuming that `rustup` is installed, which breaks
the build on systems that do not use `rustup`. This pull request just
fixes it by not panicking on the call to `rustup`.

aa4754e3

Fixes runtime type with doc parsing in derive_impl (#2594) · 35c39c96

gupnik authored Dec 04, 2023

Step in https://github.com/paritytech/polkadot-sdk/issues/171

This PR fixes a bug in `derive_impl` causing `#[inject_runtime_type]`
attribute to be parsed incorrectly when docs are added.

35c39c96

Dec 01, 2023

sassafras: taplo happy (#2583) · 5789d6a7
Michal Kucharczyk authored Dec 01, 2023
```
fixes: `taplo format check`
```
5789d6a7

Bump the known_good_semver group with 1 update (#2575) · 87a73e7a

dependabot[bot] authored Dec 01, 2023



Bumps the known_good_semver group with 1 update:
[syn](https://github.com/dtolnay/syn).

Updates `syn` from 2.0.38 to 2.0.39
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/syn/releases">syn's
releases</a>.</em></p>
<blockquote>
<h2>2.0.39</h2>
<ul>
<li>Fix parsing of return expression in match guards (<a
href="https://redirect.github.com/dtolnay/syn/issues/1528">#1528</a>)</li>
<li>Improve error message on labeled loop as value expression for break
(<a
href="https://redirect.github.com/dtolnay/syn/issues/1531">#1531</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/syn/commit/924217c1734c085ee6cdb5e198d36d610c234313"><code>924217c</code></a>
Release 2.0.39</li>
<li><a
href="https://github.com/dtolnay/syn/commit/95aeeb559866368d8b910d388c8e04b96083666a"><code>95aeeb5</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1531">#1531</a>
from dtolnay/breaklabel</li>
<li><a
href="https://github.com/dtolnay/syn/commit/b88f86fae5c1ac284179181bf7a34549e6d96d7c"><code>b88f86f</code></a>
Ignore single_element_loop clippy lint in test</li>
<li><a
href="https://github.com/dtolnay/syn/commit/a876185366557cb0e0e175c3be48721c8cc0d8e6"><code>a876185</code></a>
Improve error on break followed by labeled loop</li>
<li><a
href="https://github.com/dtolnay/syn/commit/32ab9794d6b75248c1946ae18baab12a46137eb0"><code>32ab979</code></a>
Add test of ambiguous label parsing in break</li>
<li><a
href="https://github.com/dtolnay/syn/commit/6f658f88a213e25b7ac7ec2dc77c537de679b745"><code>6f658f8</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1530">#1530</a>
from dtolnay/canbeginexpr</li>
<li><a
href="https://github.com/dtolnay/syn/commit/20497e1a555812cfe05769b4d8c117c4e0e4edbd"><code>20497e1</code></a>
More precise decision to parse expression after return keyword</li>
<li><a
href="https://github.com/dtolnay/syn/commit/c6a651aa12447d50c22db3189ef38cff90fc267b"><code>c6a651a</code></a>
Update name of ExprReturn parse function to match variant name</li>
<li><a
href="https://github.com/dtolnay/syn/commit/c2745901009f7d65e7b708cd80031642038f765e"><code>c274590</code></a>
Indicate that peek argument refers to syn::Ident</li>
<li><a
href="https://github.com/dtolnay/syn/commit/3e67cb0c660fc906770d212465652bfeb7a75727"><code>3e67cb0</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1529">#1529</a>
from dtolnay/up</li>
<li>Additional commits viewable in <a
href="https://github.com/dtolnay/syn/compare/2.0.38...2.0.39">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=syn&package-manager=cargo&previous-version=2.0.38&new-version=2.0.39)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

87a73e7a

Sassafras Consensus Pallet (#1577) · 095f4bd9

Davide Galassi authored Dec 01, 2023



This PR introduces the pallet for Sassafras consensus.

## Non Goals

The pallet delivers only the bare-bones and doesn't deliver support for
auxiliary functionalities such as equivocation report and support for
epoch change via session pallet.

These functionalities were drafted in the [main
PR](https://github.com/paritytech/polkadot-sdk/pull/1336), but IMO is
better to introduce this auxiliary stuff in a follow up PR and after
client code.

## Potential follow ups

https://github.com/paritytech/polkadot-sdk/issues/2364

---------

Co-authored-by: Sebastian Kunert <[email protected]>
Co-authored-by: Koute <[email protected]>
Co-authored-by: Michal Kucharczyk <[email protected]>
Co-authored-by: André Silva <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

095f4bd9

Bump proc-macro-crate from 1.3.1 to 2.0.0 (#2557) · 7f0beaf2

dependabot[bot] authored Dec 01, 2023



Bumps [proc-macro-crate](https://github.com/bkchr/proc-macro-crate) from
1.3.1 to 2.0.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/bkchr/proc-macro-crate/releases">proc-macro-crate's
releases</a>.</em></p>
<blockquote>
<h2>v2.0.0</h2>
<h2>What's Changed</h2>
<ul>
<li>Release 2.0.0 by <a
href="https://github.com/bkchr"><code>@bkchr</code></a> in <a
href="https://redirect.github.com/bkchr/proc-macro-crate/pull/39">bkchr/proc-macro-crate#39</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/bkchr/proc-macro-crate/compare/v1.3.1...v2.0.0">https://github.com/bkchr/proc-macro-crate/compare/v1.3.1...v2.0.0</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/bkchr/proc-macro-crate/commit/cc100ed2bc1ac9bb81812fd435a43e2ef023f355"><code>cc100ed</code></a>
Merge pull request <a
href="https://redirect.github.com/bkchr/proc-macro-crate/issues/39">#39</a>
from bkchr/bkchr-2.0.0</li>
<li><a
href="https://github.com/bkchr/proc-macro-crate/commit/39a7c1844fc4d73ef397a7e8d9419f1f3381aa44"><code>39a7c18</code></a>
Release 2.0.0</li>
<li>See full diff in <a
href="https://github.com/bkchr/proc-macro-crate/compare/v1.3.1...v2.0.0">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=proc-macro-crate&package-manager=cargo&previous-version=1.3.1&new-version=2.0.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

7f0beaf2

Contracts: make benchmark dependencies optional in `std` feature (#2576) · dfd7b15e

Andrew Jones authored Dec 01, 2023

`wasm-instrument` and `rand` are optional and only used in benchmarking,
so should not be pulled in by default as part of the `std` feature.

dfd7b15e

Enforce consistent and correct toml formatting (#2518) · 4a293bc5

Liam Aharon authored Dec 01, 2023

Using taplo, fixes all our broken and inconsistent toml formatting and
adds CI to keep them tidy.

If people want we can customise the format rules as described here
https://taplo.tamasfe.dev/configuration/formatter-options.html

@ggwpez

, I suggest zepter is used only for checking features are
propagated, and leave formatting for taplo to avoid duplicate work and
conflicts.

TODO
- [x] Use `exclude = [...]` syntax in taplo file to ignore zombienet
tests instead of deleting the dir

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

4a293bc5

Nov 30, 2023

Bump the known_good_semver group with 2 updates (#2570) · 6742aba0

dependabot[bot] authored Nov 30, 2023



Bumps the known_good_semver group with 2 updates:
[serde](https://github.com/serde-rs/serde) and
[clap](https://github.com/clap-rs/clap).

Updates `serde` from 1.0.188 to 1.0.193
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/serde/releases">serde's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.193</h2>
<ul>
<li>Fix field names used for the deserialization of
<code>RangeFrom</code> and <code>RangeTo</code> (<a
href="https://redirect.github.com/serde-rs/serde/issues/2653">#2653</a>,
<a
href="https://redirect.github.com/serde-rs/serde/issues/2654">#2654</a>,
<a
href="https://redirect.github.com/serde-rs/serde/issues/2655">#2655</a>,
thanks <a
href="https://github.com/emilbonnek"><code>@emilbonnek</code></a>)</li>
</ul>
<h2>v1.0.192</h2>
<ul>
<li>Allow internal tag field in untagged variant (<a
href="https://redirect.github.com/serde-rs/serde/issues/2646">#2646</a>,
thanks <a
href="https://github.com/robsdedude"><code>@robsdedude</code></a>)</li>
</ul>
<h2>v1.0.191</h2>
<ul>
<li>Documentation improvements</li>
</ul>
<h2>v1.0.190</h2>
<ul>
<li>Preserve NaN sign when deserializing f32 from f64 or vice versa (<a
href="https://redirect.github.com/serde-rs/serde/issues/2637">#2637</a>)</li>
</ul>
<h2>v1.0.189</h2>
<ul>
<li>Fix &quot;cannot infer type&quot; error when internally tagged enum
contains untagged variant (<a
href="https://redirect.github.com/serde-rs/serde/issues/2613">#2613</a>,
thanks <a href="https://github.com/ahl"><code>@ahl</code></a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/serde/commit/44613c7d0190dbb5ecd2d5ec19c636f45b7488cc"><code>44613c7</code></a>
Release 1.0.193</li>
<li><a
href="https://github.com/serde-rs/serde/commit/c706281df3c8d50dba1763f19c856df2746eba6c"><code>c706281</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2655">#2655</a>
from dtolnay/rangestartend</li>
<li><a
href="https://github.com/serde-rs/serde/commit/65d75b8fe3105f00ab2e01537d568d4587167582"><code>65d75b8</code></a>
Add RangeFrom and RangeTo tests</li>
<li><a
href="https://github.com/serde-rs/serde/commit/332b0cba40bcbcc7a6b23a9706277c54791a9856"><code>332b0cb</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2654">#2654</a>
from dtolnay/rangestartend</li>
<li><a
href="https://github.com/serde-rs/serde/commit/8c4af412969086bc8f54fdc2a079d373632e0a03"><code>8c4af41</code></a>
Fix more RangeFrom / RangeEnd mixups</li>
<li><a
href="https://github.com/serde-rs/serde/commit/24a78f071b22ae491eec4127be696ac255b9b5d3"><code>24a78f0</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2653">#2653</a>
from emilbonnek/fix/range-to-from-de-mixup</li>
<li><a
href="https://github.com/serde-rs/serde/commit/c91c33436d7aaef7472ebc18b734ddc9b5bd11fa"><code>c91c334</code></a>
Fix Range{From,To} deserialize mixup</li>
<li><a
href="https://github.com/serde-rs/serde/commit/2083f43a287cac8302009fda5bbe41518dd83209"><code>2083f43</code></a>
Update ui test suite to nightly-2023-11-19</li>
<li><a
href="https://github.com/serde-rs/serde/commit/4676abdc9e6bbbddfb33a00ce8d7e81e92f01120"><code>4676abd</code></a>
Release 1.0.192</li>
<li><a
href="https://github.com/serde-rs/serde/commit/35700eb23e21d8cb198ef4a422ddad13b855ce3b"><code>35700eb</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2646">#2646</a>
from robsdedude/fix/2643/allow-tag-field-in-untagged</li>
<li>Additional commits viewable in <a
href="https://github.com/serde-rs/serde/compare/v1.0.188...v1.0.193">compare
view</a></li>
</ul>
</details>
<br />

Updates `clap` from 4.4.6 to 4.4.10
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/releases">clap's
releases</a>.</em></p>
<blockquote>
<h2>v4.4.10</h2>
<h2>[4.4.10] - 2023-11-28</h2>
<h3>Documentation</h3>
<ul>
<li>Link out to changelog</li>
<li>Cross link derive's attribute reference to derive tutorial</li>
</ul>
<h2>v4.4.9</h2>
<h2>[4.4.9] - 2023-11-27</h2>
<h3>Fixes</h3>
<ul>
<li><em>(help)</em> Show correct <code>Command::about</code> under
flattened headings</li>
<li><em>(help)</em> Respect <code>hide</code> when flattening
subcommands</li>
</ul>
<h2>v4.4.8</h2>
<h2>[4.4.8] - 2023-11-10</h2>
<h3>Features</h3>
<ul>
<li>Add <code>Command::flatten_help</code> to allow <code>git stash
-h</code> like help for subcommands</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.4.10] - 2023-11-28</h2>
<h3>Documentation</h3>
<ul>
<li>Link out to changelog</li>
<li>Cross link derive's attribute reference to derive tutorial</li>
</ul>
<h2>[4.4.9] - 2023-11-27</h2>
<h3>Fixes</h3>
<ul>
<li><em>(help)</em> Show correct <code>Command::about</code> under
flattened headings</li>
<li><em>(help)</em> Respect <code>hide</code> when flattening
subcommands</li>
</ul>
<h2>[4.4.8] - 2023-11-10</h2>
<h3>Features</h3>
<ul>
<li>Add <code>Command::flatten_help</code> to allow <code>git stash
-h</code> like help for subcommands</li>
</ul>
<h2>[4.4.7] - 2023-10-24</h2>
<h3>Performance</h3>
<ul>
<li>Reduced code size</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/c0a1814d3c1d93c18faaedc95fd251846e47f4fe"><code>c0a1814</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/c83e681e20b05f7e128088f47f8fcfc44e8ea166"><code>c83e681</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/91bcac4ca9d442786f554abeb7b1ed6d7a464a42"><code>91bcac4</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5230">#5230</a>
from epage/migrate</li>
<li><a
href="https://github.com/clap-rs/clap/commit/030d87505d150345ddd425c1df21c034d2ae7748"><code>030d875</code></a>
docs: Link out to the changelog at the relevant tag</li>
<li><a
href="https://github.com/clap-rs/clap/commit/b661a9de04aebd1adaaafdbf7e470f07a8d8a36d"><code>b661a9d</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5229">#5229</a>
from epage/derive</li>
<li><a
href="https://github.com/clap-rs/clap/commit/a08587b00e347492165ded1415bad6ab339e9f0b"><code>a08587b</code></a>
docs(derive): Link to tutorial sections for attributes</li>
<li><a
href="https://github.com/clap-rs/clap/commit/21b671f689bc0b8d790dc8c42902c22822bf6f82"><code>21b671f</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/93ba76dbaaf9136313a4fe2978693cc39fa467dd"><code>93ba76d</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/c1c55b30d853446e2cab78664c0d22c1b77d4dfd"><code>c1c55b3</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5228">#5228</a>
from epage/flat</li>
<li><a
href="https://github.com/clap-rs/clap/commit/b13f6d98622b80ba30e63c2c6e65d218cc8a4de3"><code>b13f6d9</code></a>
fix(help): Hide 'help' if only flattened subcommand</li>
<li>Additional commits viewable in <a
href="https://github.com/clap-rs/clap/compare/v4.4.6...v4.4.10">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

6742aba0

PoV Reclaim (Clawback) Node Side (#1462) · 9a650c46

Sebastian Kunert authored Nov 30, 2023

This PR provides the infrastructure for the pov-reclaim mechanism
discussed in #209. The goal is to provide the current proof size to the
runtime so it can be used to reclaim storage weight.

## New Host Function
- A new host function is provided
[here](https://github.com/skunert/polkadot-sdk/blob/5b317fda

/cumulus/primitives/pov-reclaim/src/lib.rs#L23).
It returns the size of the current proof size to the runtime. If
recording is not enabled, it returns 0.

## Implementation Overview
- Implement option to enable proof recording during import in the
client. This is currently enabled for `polkadot-parachain`,
`parachain-template` and the cumulus test node.
- Make the proof recorder ready for no-std. It was previously only
enabled for std environments, but we need to record the proof size in
`validate_block` too.
- Provide a recorder implementation that only the records the size of
incoming nodes and does not store the nodes itself.
- Fix benchmarks that were broken by async backing changes
- Provide new externalities extension that is registered by default if
proof recording is enabled.
- I think we should discuss the naming, pov-reclaim was more intuitive
to me, but we could also go with clawback like in the issue.

## Impact of proof recording during import
With proof recording: 6.3058 Kelem/s
Without proof recording: 6.3427 Kelem/s

The measured impact on the importing performance is quite low on my
machine using the block import benchmark. With proof recording I am
seeing a performance hit of 0.585%.

---------

Co-authored-by: command-bot <>
Co-authored-by: Davide Galassi <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

9a650c46