Skip to content
  1. Apr 26, 2024
  3. Apr 24, 2024
  5. Apr 16, 2024
  7. Apr 12, 2024
    • Branislav Kontur's avatar
      Remove `xcm::v3` from `assets-common` nits (#4037) · 5601f286
      Branislav Kontur authored 
      This PR mainly removes `xcm::v3` stuff from `assets-common` to make it
more generic and facilitate the transition to newer XCM versions. Some
of the implementations here used hard-coded `xcm::v3::Location`, but now
it's up to the runtime to configure according to its needs.

Additional/consequent changes:
- `penpal` runtime uses now `xcm::latest::Location` for `pallet_assets`
as `AssetId`, because we don't care about migrations here
- it pretty much simplify xcm-emulator integration tests, where we don't
need now a lots of boilerplate conversions:
      ```
      v3::Location::try_from(...).expect("conversion works")`
      ```
- xcm-emulator tests
- split macro `impl_assets_helpers_for_parachain` to the
`impl_assets_helpers_for_parachain` and
`impl_foreign_assets_helpers_for_parachain` (avoids using hard-coded
`xcm::v3::Location`)
      5601f286
    • Adrian Catangiu's avatar
      pallet-xcm: add new extrinsic for asset transfers using explicit XCM transfer types (#3695) · 1e971b8d
      Adrian Catangiu authored 
      

# Description

Add `transfer_assets_using()` for transferring assets from local chain
to destination chain using explicit XCM transfer types such as:
- `TransferType::LocalReserve`: transfer assets to sovereign account of
destination chain and forward a notification XCM to `dest` to mint and
deposit reserve-based assets to `beneficiary`.
- `TransferType::DestinationReserve`: burn local assets and forward a
notification to `dest` chain to withdraw the reserve assets from this
chain's sovereign account and deposit them to `beneficiary`.
- `TransferType::RemoteReserve(reserve)`: burn local assets, forward XCM
to `reserve` chain to move reserves from this chain's SA to `dest`
chain's SA, and forward another XCM to `dest` to mint and deposit
reserve-based assets to `beneficiary`. Typically the remote `reserve` is
Asset Hub.
- `TransferType::Teleport`: burn local assets and forward XCM to `dest`
chain to mint/teleport assets and deposit them to `beneficiary`.

By default, an asset's reserve is its origin chain. But sometimes we may
want to explicitly use another chain as reserve (as long as allowed by
runtime `IsReserve` filter).

This is very helpful for transferring assets with multiple configured
reserves (such as Asset Hub ForeignAssets), when the transfer strictly
depends on the used reserve.

E.g. For transferring Foreign Assets over a bridge, Asset Hub must be
used as the reserve location.

# Example usage scenarios

## Transfer bridged ethereum ERC20-tokenX between ecosystem parachains.

ERC20-tokenX is registered on AssetHub as a ForeignAsset by the
Polkadot<>Ethereum bridge (Snowbridge). Its asset_id is something like
`(parents:2, (GlobalConsensus(Ethereum), Address(tokenX_contract)))`.
Its _original_ reserve is Ethereum (only we can't use Ethereum as a
reserve in local transfers); but, since tokenX is also registered on
AssetHub as a ForeignAsset, we can use AssetHub as a reserve.

With this PR we can transfer tokenX from ParaA to ParaB while using
AssetHub as a reserve.

## Transfer AssetHub ForeignAssets between parachains

AssetA created on ParaA but also registered as foreign asset on Asset
Hub. Can use AssetHub as a reserve.

And all of the above can be done while still controlling transfer type
for `fees` so mixing assets in same transfer is supported.

# Tests

Added integration tests for showcasing:
- transferring local (not bridged) assets from parachain over bridge
using local Asset Hub reserve,
- transferring foreign assets from parachain to Asset Hub,
- transferring foreign assets from Asset Hub to parachain,
- transferring foreign assets from parachain to parachain using local
Asset Hub reserve.

---------

Co-authored-by: default avatarBranislav Kontur <[email protected]>
Co-authored-by: command-bot <>
      1e971b8d
  9. Apr 09, 2024
  11. Apr 02, 2024
  13. Mar 27, 2024
  15. Mar 26, 2024
    • Dcompoze's avatar
      Fix spelling mistakes across the whole repository (#3808) · 002d9260
      Dcompoze authored 
      **Update:** Pushed additional changes based on the review comments.

**This pull request fixes various spelling mistakes in this
repository.**

Most of the changes are contained in the first **3** commits:

- `Fix spelling mistakes in comments and docs`

- `Fix spelling mistakes in test names`

- `Fix spelling mistakes in error messages, panic messages, logs and
tracing`

Other source code spelling mistakes are separated into individual
commits for easier reviewing:

- `Fix the spelling of 'authority'`

- `Fix the spelling of 'REASONABLE_HEADERS_IN_JUSTIFICATION_ANCESTRY'`

- `Fix the spelling of 'prev_enqueud_messages'`

- `Fix the spelling of 'endpoint'`

- `Fix the spelling of 'children'`

- `Fix the spelling of 'PenpalSiblingSovereignAccount'`

- `Fix the spelling of 'PenpalSudoAccount'`

- `Fix the spelling of 'insufficient'`

- `Fix the spelling of 'PalletXcmExtrinsicsBenchmark'`

- `Fix the spelling of 'subtracted'`

- `Fix the spelling of 'CandidatePendingAvailability'`

- `Fix the spelling of 'exclusive'`

- `Fix the spelling of 'until'`

- `Fix the spelling of 'discriminator'`

- `Fix the spelling of 'nonexistent'`

- `Fix the spelling of 'subsystem'`

- `Fix the spelling of 'indices'`

- `Fix the spelling of 'committed'`

- `Fix the spelling of 'topology'`

- `Fix the spelling of 'response'`

- `Fix the spelling of 'beneficiary'`

- `Fix the spelling of 'formatted'`

- `Fix the spelling of 'UNKNOWN_PROOF_REQUEST'`

- `Fix the spelling of 'succeeded'`

- `Fix the spelling of 'reopened'`

- `Fix the spelling of 'proposer'`

- `Fix the spelling of 'InstantiationNonce'`

- `Fix the spelling of 'depositor'`

- `Fix the spelling of 'expiration'`

- `Fix the spelling of 'phantom'`

- `Fix the spelling of 'AggregatedKeyValue'`

- `Fix the spelling of 'randomness'`

- `Fix the spelling of 'defendant'`

- `Fix the spelling of 'AquaticMammal'`

- `Fix the spelling of 'transactions'`

- `Fix the spelling of 'PassingTracingSubscriber'`

- `Fix the spelling of 'TxSignaturePayload'`

- `Fix the spelling of 'versioning'`

- `Fix the spelling of 'descendant'`

- `Fix the spelling of 'overridden'`

- `Fix the spelling of 'network'`

Let me know if this structure is adequate.

**Note:** The usage of the words `Merkle`, `Merkelize`, `Merklization`,
`Merkelization`, `Merkleization`, is somewhat inconsistent but I left it
as it is.

~~**Note:** In some places the term `Receival` is used to refer to
message reception, IMO `Reception` is the correct word here, but I left
it as it is.~~

~~**Note:** In some places the term `Overlayed` is used instead of the
more acceptable version `Overlaid` but I also left it as it is.~~

~~**Note:** In some places the term `Applyable` is used instead of the
correct version `Applicable` but I also left it as it is.~~

**Note:** Some usage of British vs American english e.g. `judgement` vs
`judgment`, `initialise` vs `initialize`, `optimise` vs `optimize` etc.
are both present in different places, but I suppose that's
understandable given the number of contributors.

~~**Note:** There is a spelling mistake in `.github/CODEOWNERS` but it
triggers errors in CI when I make changes to it, so I left it as it
is.~~
      002d9260
  17. Mar 25, 2024
  19. Mar 22, 2024
  21. Mar 14, 2024
    • Ignacio Palacios's avatar
      Improve Penpal runtime + emulated tests (#3543) · cfc4050d
      Ignacio Palacios authored 
      Issues addressed in this PR:
- Improve *Penpal* runtime:
- Properly handled received assets. Previously, it treated `(1, Here)`
as the local native currency, whereas it should be treated as a
`ForeignAsset`. This wasn't a great example of standard Parachain
behaviour, as no Parachain treats the system asset as the local
currency.
- Remove `AllowExplicitUnpaidExecutionFrom` the system. Again, this
wasn't a great example of standard Parachain behaviour.
- Move duplicated
`ForeignAssetFeeAsExistentialDepositMultiplierFeeCharger` to
`assets_common` crate.
- Improve emulated tests:
  - Update *Penpal* tests to new runtime.
- To simplify tests, register the reserve transferred, teleported, and
system assets in *Penpal* and *AssetHub* genesis. This saves us from
having to create the assets repeatedly for each test
- Add missing test case:
`reserve_transfer_assets_from_para_to_system_para`.
  - Cleanup.
- Prevent integration tests crates imports from being re-exported, as
they were polluting the `polkadot-sdk` docs.

There is still a test case missing for reserve transfers:
- Reserve transfer of system asset from *Parachain* to *Parachain*
trough *AssetHub*.
- This is not yet possible with `pallet-xcm` due to the reasons
explained in https://github.com/paritytech/polkadot-sdk/pull/3339

---------

Co-authored-by: command-bot <>
      cfc4050d
  23. Mar 06, 2024
    • Branislav Kontur's avatar
      Make `penpal-runtime`'s `TrustedReserves` more connfigurable (#3564) · 117a9433
      Branislav Kontur authored 
      

The current `penpal` runtime utilizes the `EthereumLocation` parameter,
which is employed for XCM emulated integration tests concerning the
Rococo <> ETH bridge. It includes a hard-coded chainId for the Ethereum
testnet utilized in Rococo. The `EthereumLocation` serves the purpose of
aligning with the `TrustedReserves`. However, due to this hard-coded
configuration, reusing `penpal` for testing various environments such as
Kusama/Polkadot versus Ethereum bridge becomes unfeasible.

This PR introduces the capability to easily customize the asset location
for `TrustedReserves` without needing to know anything about Ethereum.


## TODO
- [x] fix integration tests with
`System::set_storage(CustomizableAssetFromSystemAssetHub::key(),
<whatever-location-is-needed>)` @claravanstaden
- [ ] ~~maybe add some helper function/macro to support `set_storage`
for other runtimes (that we could reuse)~~
- [ ] Release patch for: `penpal-runtime` + emulated crate with
`set_storage` support (if needed)
  - [ ] backport to 1.7.0
  - [ ] backport to 1.8.0

---------

Co-authored-by: default avatarClara van Staden <[email protected]>
      117a9433
  25. Feb 13, 2024
  27. Feb 02, 2024
    • Clara van Staden's avatar
      Removes Snowbridge parachain directory (#3186) · 2ab3f03f
      Clara van Staden authored 
      Removes the `bridges/snowbridge/parachain` directory and moves
everything up to under `snowbridge` directly. We are cleaning up our
local dev env after merging our crates into the polkadot-sdk.

---------

Co-authored-by: claravanstaden <Cats 4 life!>
      2ab3f03f
  29. Jan 31, 2024
  31. Jan 30, 2024
  33. Jan 23, 2024
  35. Jan 18, 2024
  37. Jan 16, 2024
    • Francisco Aguirre's avatar
      XCMv4 (#1230) · 8428f678
      Francisco Aguirre authored 
      

# Note for reviewer

Most changes are just syntax changes necessary for the new version.
Most important files should be the ones under the `xcm` folder.

# Description 

Added XCMv4.

## Removed `Multi` prefix
The following types have been renamed:
- MultiLocation -> Location
- MultiAsset -> Asset
- MultiAssets -> Assets
- InteriorMultiLocation -> InteriorLocation
- MultiAssetFilter -> AssetFilter
- VersionedMultiAsset -> VersionedAsset
- WildMultiAsset -> WildAsset
- VersionedMultiLocation -> VersionedLocation

In order to fix a name conflict, the `Assets` in `xcm-executor` were
renamed to `HoldingAssets`, as they represent assets in holding.

## Removed `Abstract` asset id

It was not being used anywhere and this simplifies the code.

Now assets are just constructed as follows:

```rust
let asset: Asset = (AssetId(Location::new(1, Here)), 100u128).into();
```

No need for specifying `Concrete` anymore.

## Outcome is now a named fields struct

Instead of

```rust
pub enum Outcome {
  Complete(Weight),
  Incomplete(Weight, Error),
  Error(Error),
}
```

we now have

```rust
pub enum Outcome {
  Complete { used: Weight },
  Incomplete { used: Weight, error: Error },
  Error { error: Error },
}
```

## Added Reanchorable trait

Now both locations and assets implement this trait, making it easier to
reanchor both.

## New syntax for building locations and junctions

Now junctions are built using the following methods:

```rust
let location = Location {
    parents: 1,
    interior: [Parachain(1000), PalletInstance(50), GeneralIndex(1984)].into()
};
```

or

```rust
let location = Location::new(1, [Parachain(1000), PalletInstance(50), GeneralIndex(1984)]);
```

And they are matched like so:

```rust
match location.unpack() {
  (1, [Parachain(id)]) => ...
  (0, Here) => ...,
  (1, [_]) => ...,
}
```

This syntax is mandatory in v4, and has been also implemented for v2 and
v3 for easier migration.

This was needed to make all sizes smaller.

# TODO
- [x] Scaffold v4
- [x] Port github.com/paritytech/polkadot/pull/7236
- [x] Remove `Multi` prefix
- [x] Remove `Abstract` asset id

---------

Co-authored-by: command-bot <>
Co-authored-by: default avatarKeith Yeung <[email protected]>
      8428f678
    • Muharem Ismailov's avatar
      XCM WeightTrader: Swap Fee Asset for Native Asset (#1845) · 2cb39f8d
      Muharem Ismailov authored 
      Implements an XCM executor `WeightTrader`, facilitating fee payments in
any asset that can be exchanged for a native asset.

A few constraints need to be observed:
- `buy_weight` and `refund` operations must be atomic, as another weight
trader implementation might be attempted in case of failure.
- swap credit must be utilized since there isn’t an account to which an
asset of some class can be deposited with a guarantee to meet the
existential deposit requirement. Also, operating with credits enhances
the efficiency of the weight trader -
https://github.com/paritytech/polkadot-sdk/pull/1677

related PRs:
- (depends) https://github.com/paritytech/polkadot-sdk/pull/2031
- (depends) https://github.com/paritytech/polkadot-sdk/pull/1677
- (caused) https://github.com/paritytech/polkadot-sdk/pull/1847
- (caused) https://github.com/paritytech/polkadot-sdk/pull/1876

// DONE: impl `OnUnbalanced` for a `fungible/s` credit
// DONE: make the trader free from a concept of a native currency and
drop few fallible conversions. related issue -
https://github.com/paritytech/polkadot-sdk/issues/1842


// DONE: tests

---------

Co-authored-by: default avatarjoe petrowski <[email protected]>
Co-authored-by: default avatarLiam Aharon <[email protected]>
      2cb39f8d
  39. Jan 10, 2024
  41. Jan 05, 2024
  43. Dec 22, 2023
  45. Dec 21, 2023
  47. Dec 20, 2023
  49. Dec 19, 2023
  51. Dec 13, 2023
  53. Dec 12, 2023
    • Branislav Kontur's avatar
      Ensure xcm versions over bridge (on sending chains) (#2481) · 575b8f8d
      Branislav Kontur authored 
      ## Summary

This pull request proposes a solution for improved control of the
versioned XCM flow over the bridge (across different consensus chains)
and resolves the situation where the sending chain/consensus has already
migrated to a higher XCM version than the receiving chain/consensus.

## Problem/Motivation

The current flow over the bridge involves a transfer from AssetHubRococo
(AHR) to BridgeHubRococo (BHR) to BridgeHubWestend (BHW) and finally to
AssetHubWestend (AHW), beginning with a reserve-backed transfer on AHR.

In this process:
1. AHR sends XCM `ExportMessage` through `XcmpQueue`, incorporating XCM
version checks using the `WrapVersion` feature, influenced by
`pallet_xcm::SupportedVersion` (managed by
`pallet_xcm::force_xcm_version` or version discovery).

2. BHR handles the `ExportMessage` instruction, utilizing the latest XCM
version. The `HaulBlobExporter` converts the inner XCM to
[`VersionedXcm::from`](https://github.com/paritytech/polkadot-sdk/blob/63ac2471aa0210f0ac9903bdd7d8f9351f9a635f/polkadot/xcm/xcm-builder/src/universal_exports.rs#L465-L467),
also using the latest XCM version.

However, challenges arise:
- Incompatibility when BHW uses a different version than BHR. For
instance, if BHR migrates to **XCMv4** while BHW remains on **XCMv3**,
BHR's `VersionedXcm::from` uses `VersionedXcm::V4` variant, causing
encoding issues for BHW.
  ```
	/// Just a simulation of possible error, which could happen on BHW
	/// (this code is based on actual master without XCMv4)
	let encoded = hex_literal::hex!("0400");
	println!("{:?}", VersionedXcm::<()>::decode(&mut &encoded[..]));

Err(Error { cause: None, desc: "Could not decode `VersionedXcm`, variant
doesn't exist" })
  ``` 
- Similar compatibility issues exist between AHR and AHW.

## Solution

This pull request introduces the following solutions:

1. **New trait `CheckVersion`** - added to the `xcm` module and exposing
`pallet_xcm::SupportedVersion`. This enhancement allows checking the
actual XCM version for desired destinations outside of the `pallet_xcm`
module.

2. **Version Check in `HaulBlobExporter`** uses `CheckVersion` to check
known/configured destination versions, ensuring compatibility. For
example, in the scenario mentioned, BHR can store the version `3` for
BHW. If BHR is on XCMv4, it will attempt to downgrade the message to
version `3` instead of using the latest version `4`.

3. **Version Check in `pallet-xcm-bridge-hub-router`** - this check
ensures compatibility with the real destination's XCM version,
preventing the unnecessary sending of messages to the local bridge hub
if versions are incompatible.

These additions aim to improve the control and compatibility of XCM
flows over the bridge and addressing issues related to version
mismatches.

## Possible alternative solution

_(More investigation is needed, and at the very least, it should extend
to XCMv4/5. If this proves to be a viable option, I can open an RFC for
XCM.)._

Add the `XcmVersion` attribute to the `ExportMessage` so that the
sending chain can determine, based on what is stored in
`pallet_xcm::SupportedVersion`, the version the destination is using.
This way, we may not need to handle the version in `HaulBlobExporter`.

```
ExportMessage {
	network: NetworkId,
	destination: InteriorMultiLocation,
	xcm: Xcm<()>
	destination_xcm_version: Version, // <- new attritbute
},
```

```
pub trait ExportXcm {
        fn validate(
		network: NetworkId,
		channel: u32,
		universal_source: &mut Option<InteriorMultiLocation>,
		destination: &mut Option<InteriorMultiLocation>,
		message: &mut Option<Xcm<()>>,
                destination_xcm_version: Version, , // <- new attritbute
	) -> SendResult<Self::Ticket>;
```

## Future Directions

This PR does not fix version discovery over bridge, further
investigation will be conducted here:
https://github.com/paritytech/polkadot-sdk/issues/2417.

## TODO

- [x] `pallet_xcm` mock for tests uses hard-coded XCM version `2` -
change to 3 or lastest?
- [x] fix `pallet-xcm-bridge-hub-router`
- [x] fix HaulBlobExporter with version determination
[here](https://github.com/paritytech/polkadot-sdk/blob/2183669d05f9b510f979a0cc3c7847707bacba2e/polkadot/xcm/xcm-builder/src/universal_exports.rs#L465)
- [x] add unit-tests to the runtimes
- [x] run benchmarks for `ExportMessage`
- [x] extend local run scripts about `force_xcm_version(dest, version)`
- [ ] when merged, prepare governance calls for Rococo/Westend
- [ ] add PRDoc

Part of: https://github.com/paritytech/parity-bridges-common/issues/2719

---------

Co-authored-by: command-bot <>
      575b8f8d
  55. Dec 08, 2023
    • Muharem Ismailov's avatar
      Westend: Fellowship Treasury (#2532) · da40d97a
      Muharem Ismailov authored 
      

Treasury Pallet Instance for the Fellowship in Westend Collectives.

In this update, we present a Treasury Pallet Instance that is under the
control of the Fellowship body, with oversight from the Root and
Treasurer origins. Here's how it is governed:
- the Root origin have the authority to reject or approve spend
proposals, with no amount limit for approvals.
- the Treasurer origin have the authority to reject or approve spend
proposals, with approval limits of up to 10,000,000 DOT.
- Voice of all Fellows ranked at 3 or above can reject or approve spend
proposals, with a maximum approval limit of 10,000 DOT.
- Voice of Fellows ranked at 4 or above can also reject or approve spend
proposals, with a maximum approval limit of 10,000,000 DOT.

Additionally, we introduce the Asset Rate Pallet Instance to establish
conversion rates from asset A to B. This is used to determine if a
proposed spend amount involving a non-native asset is permissible by the
commanding origin. The rates can be set up by the Root, Treasurer
origins, or Voice of all Fellows.

---------

Co-authored-by: default avatarjoe petrowski <[email protected]>
Co-authored-by: default avatarjoepetrowski <[email protected]>
      da40d97a
  57. Dec 06, 2023
    • Branislav Kontur's avatar
      Bridges subtree update (#2602) · be500fc2
      Branislav Kontur authored 
      ## Summary

This PR aligns Rococo/Westend bridge with latest Bridges repo
development:
- https://github.com/paritytech/parity-bridges-common/pull/2727
- https://github.com/paritytech/parity-bridges-common/pull/2728
- https://github.com/paritytech/parity-bridges-common/pull/2729




Part of: https://github.com/paritytech/parity-bridges-common/issues/2452
      be500fc2
    • Adrian Catangiu's avatar
      pallet-xcm: add new flexible `transfer_assets()` call/extrinsic (#2388) · e7651cf4
      Adrian Catangiu authored 
      # Motivation (+testing)

### Enable easy `ForeignAssets` transfers using `pallet-xcm` 

We had just previously added capabilities to teleport fees during
reserve-based transfers, but what about reserve-transferring fees when
needing to teleport some non-fee asset?

This PR aligns everything under either explicit reserve-transfer,
explicit teleport, or this new flexible `transfer_assets()` which can
mix and match as needed with fewer artificial constraints imposed to the
user.

This will enable, for example, a (non-system) parachain to teleport
their `ForeignAssets` assets to AssetHub while using DOT to pay fees.
(the assets are teleported - as foreign assets should from their owner
chain - while DOT used for fees can only be reserve-based transferred
between said parachain and AssetHub).

Added `xcm-emulator` tests for this scenario ^.

# Description

Reverts `(limited_)reserve_transfer_assets` to only allow reserve-based
transfers for all `assets` including fees.

Similarly `(limited_)teleport_assets` only allows teleports for all
`assets` including fees.
    
For complex combinations of asset transfers where assets and fees may
have different reserves or different reserve/teleport trust
configurations, users can use the newly added `transfer_assets()`
extrinsic which is more flexible in allowing more complex scenarios.

`assets` (excluding `fees`) must have same reserve location or otherwise
be teleportable to `dest`.
No limitations imposed on `fees`.

- for local reserve: transfer assets to sovereign account of destination
chain and forward a notification XCM to `dest` to mint and deposit
reserve-based assets to `beneficiary`.
- for destination reserve: burn local assets and forward a notification
to `dest` chain to withdraw the reserve assets from this chain's
sovereign account and deposit them to `beneficiary`.
- for remote reserve: burn local assets, forward XCM to reserve chain to
move reserves from this chain's SA to `dest` chain's SA, and forward
another XCM to `dest` to mint and deposit reserve-based assets to
`beneficiary`.
- for teleports: burn local assets and forward XCM to `dest` chain to
mint/teleport assets and deposit them to `beneficiary`.

## Review notes

Only around 500 lines are prod code (see `pallet_xcm/src/lib.rs`), the
rest of the PR is new tests and improving existing tests.

---------

Co-authored-by: command-bot <>
      e7651cf4
  59. Dec 01, 2023