[litep2p](https://github.com/altonen/litep2p) is a libp2p-compatible P2P
networking library. It supports all of the features of `rust-libp2p`
that are currently being utilized by Polkadot SDK.

Compared to `rust-libp2p`, `litep2p` has a quite different architecture
which is why the new `litep2p` network backend is only able to use a
little of the existing code in `sc-network`. The design has been mainly
influenced by how we'd wish to structure our networking-related code in
Polkadot SDK: independent higher-levels protocols directly communicating
with the network over links that support bidirectional backpressure. A
good example would be `NotificationHandle`/`RequestResponseHandle`
abstractions which allow, e.g., `SyncingEngine` to directly communicate
with peers to announce/request blocks.

I've tried running `polkadot --network-backend litep2p` with a few
different peer configurations and there is a noticeable reduction in
networking CPU usage. For high load (`...

The runtime now can provide a number of predefined presets of
`RuntimeGenesisConfig` struct. This presets are intended to be used in
different deployments, e.g.: `local`, `staging`, etc, and should be
included into the corresponding chain-specs.

Having `GenesisConfig` presets in runtime allows to fully decouple node
from runtime types (the problem is described in #1984).

**Summary of changes:**
- The `GenesisBuilder` API was adjusted to enable this functionality
(and provide better naming - #150):
   ```rust
    fn preset_names() -> Vec<PresetId>;
fn get_preset(id: Option<PresetId>) -> Option<serde_json::Value>;
//`None` means default
    fn build_state(value: serde_json::Value);
    pub struct PresetId(Vec<u8>);
   ```

- **Breaking change**: Old `create_default_config` method was removed,
`build_config` was renamed to `build_state`. As a consequence a node
won't be able to interact with genesis config for older runtimes. The
cleanup was made for sake of API simplicity. Also IMO maintaining
compatibility with old API is not so crucial.
- Reference implementation was provided for `substrate-test-runtime` and
`rococo` runtimes. For rococo new
[`genesis_configs_presets`](https://github.com/paritytech/polkadot-sdk/blob/3b41d66b/polkadot/runtime/rococo/src/genesis_config_presets.rs#L530)
module was added and is used in `GenesisBuilder`
[_presets-related_](https://github.com/paritytech/polkadot-sdk/blob/3b41d66b/polkadot/runtime/rococo/src/lib.rs#L2462-L2485)
methods.

- The `chain-spec-builder` util was also improved and allows to
([_doc_](https://github.com/paritytech/polkadot-sdk/blob/3b41d66b/substrate/bin/utils/chain-spec-builder/src/lib.rs#L19)):
   - list presets provided by given runtime (`list-presets`),
- display preset or default config provided by the runtime
(`display-preset`),
   - build chain-spec using named preset (`create ... named-preset`),


- The `ChainSpecBuilder` is extended with
[`with_genesis_config_preset_name`](https://github.com/paritytech/polkadot-sdk/blob/3b41d66b/substrate/client/chain-spec/src/chain_spec.rs#L447)
method which allows to build chain-spec using named preset provided by
the runtime. Sample usage on the node side
[here](https://github.com/paritytech/polkadot-sdk/blob/2caffaae

/polkadot/node/service/src/chain_spec.rs#L404).

Implementation of #1984.
fixes: #150
part of: #25

---------

Co-authored-by: Sebastian Kunert <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

This outputs:
```
2024-04-02 14:36:02.135 ERROR tokio-runtime-worker beefy: 🥩 for session starting at block 21990151
no BEEFY authority key found in store, you must generate valid session keys
(https://wiki.polkadot.network/docs/maintain-guides-how-to-validate-polkadot#generating-the-session-keys)
```
error log entry, once every session, for nodes running with
`Role::Authority` that have no public BEEFY key in their keystore

---------

Co-authored-by: Bastian Köcher <[email protected]>

Runtime release 1.2 includes bumping of the ParachainHost APIs up to
v10, so let's move all the released APIs out of vstaging folder, this PR
does not include any logic changes only renaming of the modules and some
moving around.

Signed-off-by: Alexandru Gheorghe <[email protected]>

This is a long due chore ...

---------

Signed-off-by: Andrei Sandu <[email protected]>
Co-authored-by: ordian <[email protected]>

The PR provides API for obtaining:
- the weight required to execute an XCM message,
- a list of acceptable `AssetId`s for message execution payment,
- the cost of the weight in the specified acceptable `AssetId`.

It is meant to address an issue where one has to guess how much fee to
pay for execution. Also, at the moment, a client has to guess which
assets are acceptable for fee execution payment.
See the related issue
https://github.com/paritytech/polkadot-sdk/issues/690.
With this API, a client is supposed to query the list of the supported
asset IDs (in the XCM version format the client understands), weigh the
XCM program the client wants to execute and convert the weight into one
of the acceptable assets. Note that the client is supposed to know what
program will be executed on what chains. However, having a small
companion JS library for the pallet-xcm and xtokens should be enough to
determine what XCM programs will be executed and where (since these
pallets compose a known small set of programs).
```Rust
pub trait XcmPaymentApi<Call>
	where
		Call: Codec,
	{
		/// Returns a list of acceptable payment assets.
		///
		/// # Arguments
		///
		/// * `xcm_version`: Version.
		fn query_acceptable_payment_assets(xcm_version: Version) -> Result<Vec<VersionedAssetId>, Error>;
		/// Returns a weight needed to execute a XCM.
		///
		/// # Arguments
		///
		/// * `message`: `VersionedXcm`.
		fn query_xcm_weight(message: VersionedXcm<Call>) -> Result<Weight, Error>;
		/// Converts a weight into a fee for the specified `AssetId`.
		///
		/// # Arguments
		///
		/// * `weight`: convertible `Weight`.
		/// * `asset`: `VersionedAssetId`.
		fn query_weight_to_asset_fee(weight: Weight, asset: VersionedAssetId) -> Result<u128, Error>;
		/// Get delivery fees for sending a specific `message` to a `destination`.
		/// These always come in a specific asset, defined by the chain.
		///
		/// # Arguments
		/// * `message`: The message that'll be sent, necessary because most delivery fees are based on the
		///   size of the message.
		/// * `destination`: The destination to send the message to. Different destinations may use
		///   different senders that charge different fees.
		fn query_delivery_fees(destination: VersionedLocation, message: VersionedXcm<()>) -> Result<VersionedAssets, Error>;
	}
```
An
[example](https://gist.github.com/PraetorP/4bc323ff85401abe253897ba990ec29d)
of a client side code.

---------

Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Adrian Catangiu <[email protected]>
Co-authored-by: Daniel Shiposha <[email protected]>

**Update:** Pushed additional changes based on the review comments.

**This pull request fixes various spelling mistakes in this
repository.**

Most of the changes are contained in the first **3** commits:

- `Fix spelling mistakes in comments and docs`

- `Fix spelling mistakes in test names`

- `Fix spelling mistakes in error messages, panic messages, logs and
tracing`

Other source code spelling mistakes are separated into individual
commits for easier reviewing:

- `Fix the spelling of 'authority'`

- `Fix the spelling of 'REASONABLE_HEADERS_IN_JUSTIFICATION_ANCESTRY'`

- `Fix the spelling of 'prev_enqueud_messages'`

- `Fix the spelling of 'endpoint'`

- `Fix the spelling of 'children'`

- `Fix the spelling of 'PenpalSiblingSovereignAccount'`

- `Fix the spelling of 'PenpalSudoAccount'`

- `Fix the spelling of 'insufficient'`

- `Fix the spelling of 'PalletXcmExtrinsicsBenchmark'`

- `Fix the spelling of 'subtracted'`

- `Fix the spelling of 'CandidatePendingAvailability'`

- `Fix the spelling of 'exclusive'`

- `Fix the spelling of 'until'`

- `Fix the spelling of 'discriminator'`

- `Fix the spelling of 'nonexistent'`

- `Fix the spelling of 'subsystem'`

- `Fix the spelling of 'indices'`

- `Fix the spelling of 'committed'`

- `Fix the spelling of 'topology'`

- `Fix the spelling of 'response'`

- `Fix the spelling of 'beneficiary'`

- `Fix the spelling of 'formatted'`

- `Fix the spelling of 'UNKNOWN_PROOF_REQUEST'`

- `Fix the spelling of 'succeeded'`

- `Fix the spelling of 'reopened'`

- `Fix the spelling of 'proposer'`

- `Fix the spelling of 'InstantiationNonce'`

- `Fix the spelling of 'depositor'`

- `Fix the spelling of 'expiration'`

- `Fix the spelling of 'phantom'`

- `Fix the spelling of 'AggregatedKeyValue'`

- `Fix the spelling of 'randomness'`

- `Fix the spelling of 'defendant'`

- `Fix the spelling of 'AquaticMammal'`

- `Fix the spelling of 'transactions'`

- `Fix the spelling of 'PassingTracingSubscriber'`

- `Fix the spelling of 'TxSignaturePayload'`

- `Fix the spelling of 'versioning'`

- `Fix the spelling of 'descendant'`

- `Fix the spelling of 'overridden'`

- `Fix the spelling of 'network'`

Let me know if this structure is adequate.

**Note:** The usage of the words `Merkle`, `Merkelize`, `Merklization`,
`Merkelization`, `Merkleization`, is somewhat inconsistent but I left it
as it is.

~~**Note:** In some places the term `Receival` is used to refer to
message reception, IMO `Reception` is the correct word here, but I left
it as it is.~~

~~**Note:** In some places the term `Overlayed` is used instead of the
more acceptable version `Overlaid` but I also left it as it is.~~

~~**Note:** In some places the term `Applyable` is used instead of the
correct version `Applicable` but I also left it as it is.~~

**Note:** Some usage of British vs American english e.g. `judgement` vs
`judgment`, `initialise` vs `initialize`, `optimise` vs `optimize` etc.
are both present in different places, but I suppose that's
understandable given the number of contributors.

~~**Note:** There is a spelling mistake in `.github/CODEOWNERS` but it
triggers errors in CI when I make changes to it, so I left it as it
is.~~

Make sure explicitly set by the operator public addresses go first in
the authority discovery DHT records.

Also update `Discovery` behavior to eliminate duplicates in the returned
addresses.

This PR should improve situation with
https://github.com/paritytech/polkadot-sdk/issues/3519.

Obsoletes https://github.com/paritytech/polkadot-sdk/pull/3657.

Introduces `CryptoBytes` type defined as:

```rust
pub struct CryptoBytes<const N: usize, Tag = ()>(pub [u8; N], PhantomData<fn() -> Tag>);
```

The type implements a bunch of methods and traits which are typically
expected from a byte array newtype
(NOTE: some of the methods and trait implementations IMO are a bit
redundant, but I decided to maintain them all to not change too much
stuff in this PR)

It also introduces two (generic) typical consumers of `CryptoBytes`:
`PublicBytes` and `SignatureBytes`.

```rust
pub struct PublicTag;
pub PublicBytes<const N: usize, CryptoTag> = CryptoBytes<N, (PublicTag, CryptoTag)>;

pub struct SignatureTag;
pub SignatureBytes<const N: usize, CryptoTag> = CryptoBytes<N, (SignatureTag, CryptoTag)>;
```

Both of them use a tag to differentiate the two types at a higher level.
Downstream specializations will further specialize using a dedicated
crypto tag. For example in ECDSA:


```rust
pub struct EcdsaTag;

pub type Public = PublicBytes<PUBLIC_KEY_SERIALIZED_SIZE, EcdsaTag>;
pub type Signature = PublicBytes<PUBLIC_KEY_SERIALIZED_SIZE, EcdsaTag>;
```

Overall we have a cleaner and most importantly **consistent** code for
all the types involved

All these details are opaque to the end user which can use `Public` and
`Signature` for the cryptos as before

Revert "FRAME: Create `TransactionExtension` as a replacement for `SignedExtension` (#2280)" (#3665)

This PR reverts #2280 which introduced `TransactionExtension` to replace
`SignedExtension`.

As a result of the discussion
[here](https://github.com/paritytech/polkadot-sdk/pull/3623#issuecomment-1986789700),
the changes will be reverted for now with plans to reintroduce the
concept in the future.

---------

Signed-off-by: georgepisaltu <[email protected]>

Closes #2160

First part of [Extrinsic
Horizon](https://github.com/paritytech/polkadot-sdk/issues/2415)

Introduces a new trait `TransactionExtension` to replace
`SignedExtension`. Introduce the idea of transactions which obey the
runtime's extensions and have according Extension data (né Extra data)
yet do not have hard-coded signatures.

Deprecate the terminology of "Unsigned" when used for
transactions/extrinsics owing to there now being "proper" unsigned
transactions which obey the extension framework and "old-style" unsigned
which do not. Instead we have __*General*__ for the former and
__*Bare*__ for the latter. (Ultimately, the latter will be phased out as
a type of transaction, and Bare will only be used for Inherents.)

Types of extrinsic are now therefore:
- Bare (no hardcoded signature, no Extra data; used to be known as
"Unsigned")
- Bare transactions (deprecated): Gossiped, validated with
`ValidateUnsigned` (deprecated) and the `_bare_compat` bits of
`TransactionExtension` (deprecated).
  - Inherents: Not gossiped, validated with `ProvideInherent`.
- Extended (Extra data): Gossiped, validated via `TransactionExtension`.
  - Signed transactions (with a hardcoded signature).
  - General transactions (without a hardcoded signature).

`TransactionExtension` differs from `SignedExtension` because:
- A signature on the underlying transaction may validly not be present.
- It may alter the origin during validation.
- `pre_dispatch` is renamed to `prepare` and need not contain the checks
present in `validate`.
- `validate` and `prepare` is passed an `Origin` rather than a
`AccountId`.
- `validate` may pass arbitrary information into `prepare` via a new
user-specifiable type `Val`.
- `AdditionalSigned`/`additional_signed` is renamed to
`Implicit`/`implicit`. It is encoded *for the entire transaction* and
passed in to each extension as a new argument to `validate`. This
facilitates the ability of extensions to acts as underlying crypto.

There is a new `DispatchTransaction` trait which contains only default
function impls and is impl'ed for any `TransactionExtension` impler. It
provides several utility functions which reduce some of the tedium from
using `TransactionExtension` (indeed, none of its regular functions
should now need to be called directly).

Three transaction version discriminator ("versions") are now
permissible:
- 0b000000100: Bare (used to be called "Unsigned"): contains Signature
or Extra (extension data). After bare transactions are no longer
supported, this will strictly identify an Inherents only.
- 0b100000100: Old-school "Signed" Transaction: contains Signature and
Extra (extension data).
- 0b010000100: New-school "General" Transaction: contains Extra
(extension data), but no Signature.

For the New-school General Transaction, it becomes trivial for authors
to publish extensions to the mechanism for authorizing an Origin, e.g.
through new kinds of key-signing schemes, ZK proofs, pallet state,
mutations over pre-authenticated origins or any combination of the
above.

## Code Migration

### NOW: Getting it to build

Wrap your `SignedExtension`s in `AsTransactionExtension`. This should be
accompanied by renaming your aggregate type in line with the new
terminology. E.g. Before:

```rust
/// The SignedExtension to the basic transaction logic.
pub type SignedExtra = (
	/* snip */
	MySpecialSignedExtension,
);
/// Unchecked extrinsic type as expected by this runtime.
pub type UncheckedExtrinsic =
	generic::UncheckedExtrinsic<Address, RuntimeCall, Signature, SignedExtra>;
```

After:

```rust
/// The extension to the basic transaction logic.
pub type TxExtension = (
	/* snip */
	AsTransactionExtension<MySpecialSignedExtension>,
);
/// Unchecked extrinsic type as expected by this runtime.
pub type UncheckedExtrinsic =
	generic::UncheckedExtrinsic<Address, RuntimeCall, Signature, TxExtension>;
```

You'll also need to alter any transaction building logic to add a
`.into()` to make the conversion happen. E.g. Before:

```rust
fn construct_extrinsic(
		/* snip */
) -> UncheckedExtrinsic {
	let extra: SignedExtra = (
		/* snip */
		MySpecialSignedExtension::new(/* snip */),
	);
	let payload = SignedPayload::new(call.clone(), extra.clone()).unwrap();
	let signature = payload.using_encoded(|e| sender.sign(e));
	UncheckedExtrinsic::new_signed(
		/* snip */
		Signature::Sr25519(signature),
		extra,
	)
}
```

After:

```rust
fn construct_extrinsic(
		/* snip */
) -> UncheckedExtrinsic {
	let tx_ext: TxExtension = (
		/* snip */
		MySpecialSignedExtension::new(/* snip */).into(),
	);
	let payload = SignedPayload::new(call.clone(), tx_ext.clone()).unwrap();
	let signature = payload.using_encoded(|e| sender.sign(e));
	UncheckedExtrinsic::new_signed(
		/* snip */
		Signature::Sr25519(signature),
		tx_ext,
	)
}
```

### SOON: Migrating to `TransactionExtension`

Most `SignedExtension`s can be trivially converted to become a
`TransactionExtension`. There are a few things to know.

- Instead of a single trait like `SignedExtension`, you should now
implement two traits individually: `TransactionExtensionBase` and
`TransactionExtension`.
- Weights are now a thing and must be provided via the new function `fn
weight`.

#### `TransactionExtensionBase`

This trait takes care of anything which is not dependent on types
specific to your runtime, most notably `Call`.

- `AdditionalSigned`/`additional_signed` is renamed to
`Implicit`/`implicit`.
- Weight must be returned by implementing the `weight` function. If your
extension is associated with a pallet, you'll probably want to do this
via the pallet's existing benchmarking infrastructure.

#### `TransactionExtension`

Generally:
- `pre_dispatch` is now `prepare` and you *should not reexecute the
`validate` functionality in there*!
- You don't get an account ID any more; you get an origin instead. If
you need to presume an account ID, then you can use the trait function
`AsSystemOriginSigner::as_system_origin_signer`.
- You get an additional ticket, similar to `Pre`, called `Val`. This
defines data which is passed from `validate` into `prepare`. This is
important since you should not be duplicating logic from `validate` to
`prepare`, you need a way of passing your working from the former into
the latter. This is it.
- This trait takes two type parameters: `Call` and `Context`. `Call` is
the runtime call type which used to be an associated type; you can just
move it to become a type parameter for your trait impl. `Context` is not
currently used and you can safely implement over it as an unbounded
type.
- There's no `AccountId` associated type any more. Just remove it.

Regarding `validate`:
- You get three new parameters in `validate`; all can be ignored when
migrating from `SignedExtension`.
- `validate` returns a tuple on success; the second item in the tuple is
the new ticket type `Self::Val` which gets passed in to `prepare`. If
you use any information extracted during `validate` (off-chain and
on-chain, non-mutating) in `prepare` (on-chain, mutating) then you can
pass it through with this. For the tuple's last item, just return the
`origin` argument.

Regarding `prepare`:
- This is renamed from `pre_dispatch`, but there is one change:
- FUNCTIONALITY TO VALIDATE THE TRANSACTION NEED NOT BE DUPLICATED FROM
`validate`!!
- (This is different to `SignedExtension` which was required to run the
same checks in `pre_dispatch` as in `validate`.)

Regarding `post_dispatch`:
- Since there are no unsigned transactions handled by
`TransactionExtension`, `Pre` is always defined, so the first parameter
is `Self::Pre` rather than `Option<Self::Pre>`.

If you make use of `SignedExtension::validate_unsigned` or
`SignedExtension::pre_dispatch_unsigned`, then:
- Just use the regular versions of these functions instead.
- Have your logic execute in the case that the `origin` is `None`.
- Ensure your transaction creation logic creates a General Transaction
rather than a Bare Transaction; this means having to include all
`TransactionExtension`s' data.
- `ValidateUnsigned` can still be used (for now) if you need to be able
to construct transactions which contain none of the extension data,
however these will be phased out in stage 2 of the Transactions Horizon,
so you should consider moving to an extension-centric design.

## TODO

- [x] Introduce `CheckSignature` impl of `TransactionExtension` to
ensure it's possible to have crypto be done wholly in a
`TransactionExtension`.
- [x] Deprecate `SignedExtension` and move all uses in codebase to
`TransactionExtension`.
  - [x] `ChargeTransactionPayment`
  - [x] `DummyExtension`
  - [x] `ChargeAssetTxPayment` (asset-tx-payment)
  - [x] `ChargeAssetTxPayment` (asset-conversion-tx-payment)
  - [x] `CheckWeight`
  - [x] `CheckTxVersion`
  - [x] `CheckSpecVersion`
  - [x] `CheckNonce`
  - [x] `CheckNonZeroSender`
  - [x] `CheckMortality`
  - [x] `CheckGenesis`
  - [x] `CheckOnlySudoAccount`
  - [x] `WatchDummy`
  - [x] `PrevalidateAttests`
  - [x] `GenericSignedExtension`
  - [x] `SignedExtension` (chain-polkadot-bulletin)
  - [x] `RefundSignedExtensionAdapter`
- [x] Implement `fn weight` across the board.
- [ ] Go through all pre-existing extensions which assume an account
signer and explicitly handle the possibility of another kind of origin.
- [x] `CheckNonce` should probably succeed in the case of a non-account
origin.
- [x] `CheckNonZeroSender` should succeed in the case of a non-account
origin.
- [x] `ChargeTransactionPayment` and family should fail in the case of a
non-account origin.
  - [ ] 
- [x] Fix any broken tests.

---------

Signed-off-by: georgepisaltu <[email protected]>
Signed-off-by: Alexandru Vasile <[email protected]>
Signed-off-by: dependabot[bot] <[email protected]>
Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Signed-off-by: Alexandru Gheorghe <[email protected]>
Signed-off-by: Andrei Sandu <[email protected]>
Co-authored-by: Nikhil Gupta <[email protected]>
Co-authored-by: georgepisaltu <[email protected]>
Co-authored-by: Chevdor <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Maciej <[email protected]>
Co-authored-by: Javier Viola <[email protected]>
Co-authored-by: Marcin S. <[email protected]>
Co-authored-by: Tsvetomir Dimitrov <[email protected]>
Co-authored-by: Javier Bullrich <[email protected]>
Co-authored-by: Koute <[email protected]>
Co-authored-by: Adrian Catangiu <[email protected]>
Co-authored-by: Vladimir Istyufeev <[email protected]>
Co-authored-by: Ross Bulat <[email protected]>
Co-authored-by: Gonçalo Pestana <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Svyatoslav Nikolsky <[email protected]>
Co-authored-by: André Silva <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: s0me0ne-unkn0wn <[email protected]>
Co-authored-by: ordian <[email protected]>
Co-authored-by: Sebastian Kunert <[email protected]>
Co-authored-by: Aaro Altonen <[email protected]>
Co-authored-by: Dmitry Markin <[email protected]>
Co-authored-by: Alexandru Vasile <[email protected]>
Co-authored-by: Alexander Samusev <[email protected]>
Co-authored-by: Julian Eager <[email protected]>
Co-authored-by: Michal Kucharczyk <[email protected]>
Co-authored-by: Davide Galassi <[email protected]>
Co-authored-by: Dónal Murray <[email protected]>
Co-authored-by: yjh <[email protected]>
Co-authored-by: Tom Mi <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Will | Paradox | ParaNodes.io <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Joshy Orndorff <[email protected]>
Co-authored-by: Joshy Orndorff <[email protected]>
Co-authored-by: PG Herveou <[email protected]>
Co-authored-by: Alexander Theißen <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: Juan Girini <[email protected]>
Co-authored-by: bader y <[email protected]>
Co-authored-by: James Wilson <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: asynchronous rob <[email protected]>
Co-authored-by: Parth <[email protected]>
Co-authored-by: Andrew Jones <[email protected]>
Co-authored-by: Jonathan Udd <[email protected]>
Co-authored-by: Serban Iorga <[email protected]>
Co-authored-by: Egor_P <[email protected]>
Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: Evgeny Snitko <[email protected]>
Co-authored-by: Just van Stam <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: gupnik <[email protected]>
Co-authored-by: dzmitry-lahoda <[email protected]>
Co-authored-by: zhiqiangxu <[email protected]>
Co-authored-by: Nazar Mokrynskyi <[email protected]>
Co-authored-by: Anwesh <[email protected]>
Co-authored-by: cheme <[email protected]>
Co-authored-by: Sam Johnson <[email protected]>
Co-authored-by: kianenigma <[email protected]>
Co-authored-by: Jegor Sidorenko <[email protected]>
Co-authored-by: Muharem <[email protected]>
Co-authored-by: joepetrowski <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Gabriel Facco de Arruda <[email protected]>
Co-authored-by: Squirrel <[email protected]>
Co-authored-by: Andrei Sandu <[email protected]>
Co-authored-by: georgepisaltu <[email protected]>
Co-authored-by: command-bot <>

Signed-off-by: Andrei Sandu <[email protected]>

This PR removes `AssignmentProviderConfig` and uses the corresponding
ondemand parameters from `HostConfiguration` instead. Additionally
`scheduling_lookahead` and all coretime/ondemand related parameters are
extracted in a separate struct - `SchedulerParams`.

The most relevant commit from the PR is [this
one](https://github.com/paritytech/polkadot-sdk/pull/3181/commits/830bc0f5).

Fixes https://github.com/paritytech/polkadot-sdk/issues/2268

---------

Co-authored-by: command-bot <>

This MR is the merge of
https://github.com/paritytech/substrate/pull/14414 and
https://github.com/paritytech/substrate/pull/14275. It implements
[RFC#13](https://github.com/polkadot-fellows/RFCs/pull/13), closes
https://github.com/paritytech/polkadot-sdk/issues/198.

----- 

This Merge request introduces three major topicals:

1. Multi-Block-Migrations
1. New pallet `poll` hook for periodic service work
1. Replacement hooks for `on_initialize` and `on_finalize` in cases
where `poll` cannot be used

and some more general changes to FRAME.  
The changes for each topical span over multiple crates. They are listed
in topical order below.

# 1.) Multi-Block-Migrations

Multi-Block-Migrations are facilitated by creating `pallet_migrations`
and configuring `System::Config::MultiBlockMigrator` to point to it.
Executive picks this up and triggers one step of the migrations pallet
per block.
The chain is in lockdown mode for as long as an MBM is ongoing.
Executive does this by polling `MultiBlockMigrator::ongoing` and not
allowing any transaction in a block, if true.

A MBM is defined through trait `SteppedMigration`. A condensed version
looks like this:
```rust
/// A migration that can proceed in multiple steps.
pub trait SteppedMigration {
	type Cursor: FullCodec + MaxEncodedLen;
	type Identifier: FullCodec + MaxEncodedLen;

	fn id() -> Self::Identifier;

	fn max_steps() -> Option<u32>;

	fn step(
		cursor: Option<Self::Cursor>,
		meter: &mut WeightMeter,
	) -> Result<Option<Self::Cursor>, SteppedMigrationError>;
}
```

`pallet_migrations` can be configured with an aggregated tuple of these
migrations. It then starts to migrate them one-by-one on the next
runtime upgrade.
Two things are important here:
- 1. Doing another runtime upgrade while MBMs are ongoing is not a good
idea and can lead to messed up state.
- 2. **Pallet Migrations MUST BE CONFIGURED IN `System::Config`,
otherwise it is not used.**

The pallet supports an `UpgradeStatusHandler` that can be used to notify
external logic of upgrade start/finish (for example to pause XCM
dispatch).

Error recovery is very limited in the case that a migration errors or
times out (exceeds its `max_steps`). Currently the runtime dev can
decide in `FailedMigrationHandler::failed` how to handle this. One
follow-up would be to pair this with the `SafeMode` pallet and enact
safe mode when an upgrade fails, to allow governance to rescue the
chain. This is currently not possible, since governance is not
`Mandatory`.

## Runtime API

- `Core`: `initialize_block` now returns `ExtrinsicInclusionMode` to
inform the Block Author whether they can push transactions.

### Integration

Add it to your runtime implementation of `Core` and `BlockBuilder`:
```patch
diff --git a/runtime/src/lib.rs b/runtime/src/lib.rs
@@ impl_runtime_apis! {
	impl sp_block_builder::Core<Block> for Runtime {
-		fn initialize_block(header: &<Block as BlockT>::Header) {
+		fn initialize_block(header: &<Block as BlockT>::Header) -> RuntimeExecutiveMode {
			Executive::initialize_block(header)
		}

		...
	}
```

# 2.) `poll` hook

A new pallet hook is introduced: `poll`. `Poll` is intended to replace
mostly all usage of `on_initialize`.
The reason for this is that any code that can be called from
`on_initialize` cannot be migrated through an MBM. Currently there is no
way to statically check this; the implication is to use `on_initialize`
as rarely as possible.
Failing to do so can result in broken storage invariants.

The implementation of the poll hook depends on the `Runtime API` changes
that are explained above.

# 3.) Hard-Deadline callbacks

Three new callbacks are introduced and configured on `System::Config`:
`PreInherents`, `PostInherents` and `PostTransactions`.
These hooks are meant as replacement for `on_initialize` and
`on_finalize` in cases where the code that runs cannot be moved to
`poll`.
The reason for this is to make the usage of HD-code (hard deadline) more
explicit - again to prevent broken invariants by MBMs.

# 4.) FRAME (general changes)

## `frame_system` pallet

A new memorize storage item `InherentsApplied` is added. It is used by
executive to track whether inherents have already been applied.
Executive and can then execute the MBMs directly between inherents and
transactions.

The `Config` gets five new items:
- `SingleBlockMigrations` this is the new way of configuring migrations
that run in a single block. Previously they were defined as last generic
argument of `Executive`. This shift is brings all central configuration
about migrations closer into view of the developer (migrations that are
configured in `Executive` will still work for now but is deprecated).
- `MultiBlockMigrator` this can be configured to an engine that drives
MBMs. One example would be the `pallet_migrations`. Note that this is
only the engine; the exact MBMs are injected into the engine.
- `PreInherents` a callback that executes after `on_initialize` but
before inherents.
- `PostInherents` a callback that executes after all inherents ran
(including MBMs and `poll`).
- `PostTransactions` in symmetry to `PreInherents`, this one is called
before `on_finalize` but after all transactions.

A sane default is to set all of these to `()`. Example diff suitable for
any chain:
```patch
@@ impl frame_system::Config for Test {
 	type MaxConsumers = ConstU32<16>;
+	type SingleBlockMigrations = ();
+	type MultiBlockMigrator = ();
+	type PreInherents = ();
+	type PostInherents = ();
+	type PostTransactions = ();
 }
```

An overview of how the block execution now looks like is here. The same
graph is also in the rust doc.

<details><summary>Block Execution Flow</summary>
<p>

![Screenshot 2023-12-04 at 19 11
29](https://github.com/paritytech/polkadot-sdk/assets/10380170/e88a80c4-ef11-4faa-8df5-8b33a724c054)

</p>
</details> 

## Inherent Order

Moved to https://github.com/paritytech/polkadot-sdk/pull/2154

---------------


## TODO

- [ ] Check that `try-runtime` still works
- [ ] Ensure backwards compatibility with old Runtime APIs
- [x] Consume weight correctly
- [x] Cleanup

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Juan Girini <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Gavin Wood <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

Closes https://github.com/paritytech/polkadot-sdk-docs/issues/55

- Changes 'current storage version' terminology to less ambiguous
'in-code storage version' (suggestion by @ggwpez

)
- Adds a new example pallet `pallet-example-single-block-migrations`
- Adds a new reference doc to replace
https://docs.substrate.io/maintain/runtime-upgrades/ (temporarily living
in the pallet while we wait for developer hub PR to merge)
- Adds documentation for the `storage_alias` macro
- Improves `trait Hooks` docs 
- Improves `trait GetStorageVersion` docs
- Update the suggested patterns for using `VersionedMigration`, so that
version unchecked migrations are never exported
- Prevents accidental usage of version unchecked migrations in runtimes

https://github.com/paritytech/substrate/pull/14421#discussion_r1255467895
- Unversioned migration code is kept inside `mod version_unchecked`,
versioned code is kept in `pub mod versioned`
- It is necessary to use modules to limit visibility because the inner
migration must be `pub`. See
https://github.com/rust-lang/rust/issues/30905 and

https://internals.rust-lang.org/t/lang-team-minutes-private-in-public-rules/4504/40
for more.

### todo

- [x] move to reference docs to proper place within sdk-docs (now that
https://github.com/paritytech/polkadot-sdk/pull/2102 is merged)
- [x] prdoc

---------

Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: Juan <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: gupnik <[email protected]>

resolve https://github.com/paritytech/polkadot-sdk/issues/3116

a follow-up on
https://github.com/paritytech/polkadot-sdk/pull/3061#pullrequestreview-1847530265:

- [x] reuse collator overseer builder for polkadot-node and collator
- [x] run zombienet test (0001-parachains-smoke-test.toml)
- [x] make wasm build errors more user-friendly for an easier problem
detection when using different toolchains in Rust

---------

Co-authored-by: ordian <[email protected]>
Co-authored-by: s0me0ne-unkn0wn <[email protected]>

This change is mainly for people running the local variants. They can
directly start with async backing.

---------

Signed-off-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>

After some conversations around the topic of launching a community
staging network ( [forum post
1](https://forum.polkadot.network/t/a-new-test-network-for-polkadot/4325),
[forum post
2](https://forum.polkadot.network/t/the-new-polkadot-community-testnet/4956)
). And Erin having introduced the community testnet in the [last episode
of AAG](https://www.youtube.com/watch?v=uzJEGVG78_E&t=1612s).

I would like to include the `paseo` options as one of the chains
available for launching using the polkadot node.

Note that the chain spec implementation is not yet included at this
stage.

UPDATE:

Merged master with rebase enabled and introduced quite some noise in
this PR.
Relevant changes are in:
- `polkadot/node/service/chain-specs/paseo.json`
- `polkadot/node/service/src/chain_spec.rs`
- `polkadot/cli/src/command.rs`

---------

Signed-off-by: dependabot[bot] <[email protected]>
Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: Jegor Sidorenko <[email protected]>
Co-authored-by: Alexander Theißen <[email protected]>
Co-authored-by: Sergej Sakac <[email protected]>
Co-authored-by: Dónal Murray <[email protected]>
Co-authored-by: Adel Arja <[email protected]>
Co-authored-by: Gonçalo Pestana <[email protected]>
Co-authored-by: Ross Bulat <[email protected]>
Co-authored-by: Francisco Gamundi <[email protected]>
Co-authored-by: Adrian Catangiu <[email protected]>

Currently, collators and their alongside nodes spin up a full-scale
overseer running a bunch of subsystems that are not needed if the node
is not a validator. That was considered to be harmless; however, we've
got problems with unused subsystems getting stalled for a reason not
currently known, resulting in the overseer exiting and bringing down the
whole node.

This PR aims to only run needed subsystems on such nodes, replacing the
rest with `DummySubsystem`.

It also enables collator-optimized availability recovery subsystem
implementation.

Partially solves #1730.

Extract `WarpSync` (and `StateSync` as part of warp sync) from
`ChainSync` as independent syncing strategy called by `SyncingEngine`.
Introduce `SyncingStrategy` enum as a proxy between `SyncingEngine` and
specific syncing strategies.

## Limitations
Gap sync is kept in `ChainSync` for now because it shares the same set
of peers as block syncing implementation in `ChainSync`. Extraction of a
common context responsible for peer management in syncing strategies
able to run in parallel is planned for a follow-up PR.

## Further improvements
A possibility of conversion of `SyncingStartegy` into a trait should be
evaluated. The main stopper for this is that different strategies need
to communicate different actions to `SyncingEngine` and respond to
different events / provide different APIs (e.g., requesting
justifications is only possible via `ChainSync` and not through
`WarpSync`; `SendWarpProofRequest` action is only relevant to
`WarpSync`, etc.)

---------

Co-authored-by: Aaro Altonen <[email protected]>

Please let me know if this would be a better UX. Should we have specific
links in the error message?

This PR contains just a few clippy fixes and nits, which are, however,
relaxed by workspace clippy settings here:
https://github.com/paritytech/polkadot-sdk/blob/master/Cargo.toml#L483-L506

---------

Co-authored-by: Dmitry Sinyavin <[email protected]>
Co-authored-by: ordian <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Bastian Köcher <[email protected]>

Initial implementation for the plan discussed here: https://github.com/paritytech/polkadot-sdk/issues/701
Built on top of https://github.com/paritytech/polkadot-sdk/pull/1178
v0: https://github.com/paritytech/polkadot/pull/7554,

## Overall idea

When approval-voting checks a candidate and is ready to advertise the
approval, defer it in a per-relay chain block until we either have
MAX_APPROVAL_COALESCE_COUNT candidates to sign or a candidate has stayed
MAX_APPROVALS_COALESCE_TICKS in the queue, in both cases we sign what
candidates we have available.

This should allow us to reduce the number of approvals messages we have
to create/send/verify. The parameters are configurable, so we should
find some values that balance:

- Security of the network: Delaying broadcasting of an approval
shouldn't but the finality at risk and to make sure that never happens
we won't delay sending a vote if we are past 2/3 from the no-show time.
- Scalability of the network: MAX_APPROVAL_COALESCE_COUNT = 1 &
MAX_APPROVALS_COALESCE_TICKS =0, is what we have now and we know from
the measurements we did on versi, it bottlenecks
approval-distribution/approval-voting when increase significantly the
number of validators and parachains
- Block storage: In case of disputes we have to import this votes on
chain and that increase the necessary storage with
MAX_APPROVAL_COALESCE_COUNT * CandidateHash per vote. Given that
disputes are not the normal way of the network functioning and we will
limit MAX_APPROVAL_COALESCE_COUNT in the single digits numbers, this
should be good enough. Alternatively, we could try to create a better
way to store this on-chain through indirection, if that's needed.

## Other fixes:
- Fixed the fact that we were sending random assignments to
non-validators, that was wrong because those won't do anything with it
and they won't gossip it either because they do not have a grid topology
set, so we would waste the random assignments.
- Added metrics to be able to debug potential no-shows and
mis-processing of approvals/assignments.

## TODO:
- [x] Get feedback, that this is moving in the right direction. @ordian
@sandreim @eskimor

 @burdges, let me know what you think.
- [x] More and more testing.
- [x]  Test in versi.
- [x] Make MAX_APPROVAL_COALESCE_COUNT &
MAX_APPROVAL_COALESCE_WAIT_MILLIS a parachain host configuration.
- [x] Make sure the backwards compatibility works correctly
- [x] Make sure this direction is compatible with other streams of work:
https://github.com/paritytech/polkadot-sdk/issues/635 &
https://github.com/paritytech/polkadot-sdk/issues/742
- [x] Final versi burn-in before merging

---------

Signed-off-by: Alexandru Gheorghe <[email protected]>

Co-authored-by: Javier Viola <[email protected]>

The `BlockNumber` and `Hash` are fixed types any way.

This commit introduces a new concept called `NotificationService` which
allows Polkadot protocols to communicate with the underlying
notification protocol implementation directly, without routing events
through `NetworkWorker`. This implies that each protocol has its own
service which it uses to communicate with remote peers and that each
`NotificationService` is unique with respect to the underlying
notification protocol, meaning `NotificationService` for the transaction
protocol can only be used to send and receive transaction-related
notifications.

The `NotificationService` concept introduces two additional benefits:
  * allow protocols to start using custom handshakes
  * allow protocols to accept/reject inbound peers

Previously the validation of inbound connections was solely the
responsibility of `ProtocolController`. This caused issues with light
peers and `SyncingEngine` as `ProtocolController` would accept more
peers than `SyncingEngine` could accept which caused peers to have
differing views of their own states. `SyncingEngine` would reject excess
peers but these rejections were not properly communicated to those peers
causing them to assume that they were accepted.

With `NotificationService`, the local handshake is not sent to remote
peer if peer is rejected which allows it to detect that it was rejected.

This commit also deprecates the use of `NetworkEventStream` for all
notification-related events and going forward only DHT events are
provided through `NetworkEventStream`. If protocols wish to follow each
other's events, they must introduce additional abtractions, as is done
for GRANDPA and transactions protocols by following the syncing protocol
through `SyncEventStream`.

Fixes https://github.com/paritytech/polkadot-sdk/issues/512
Fixes https://github.com/paritytech/polkadot-sdk/issues/514
Fixes https://github.com/paritytech/polkadot-sdk/issues/515
Fixes https://github.com/paritytech/polkadot-sdk/issues/554
Fixes https://github.com/paritytech/polkadot-sdk/issues/556

---
These changes are transferred from
https://github.com/paritytech/substrate/pull/14197 but there are no
functional changes compared to that PR

---------

Co-authored-by: Dmitry Markin <[email protected]>
Co-authored-by: Alexandru Vasile <[email protected]>

This was never used and we probably don't need it anyway.

Co-authored-by: ordian <[email protected]>
Co-authored-by: Vladimir Istyufeev <[email protected]>

Currently the polkadot node will backoff from block authoring if
finality starts lagging. This PR disables this mechanism on production
networks (polkadot and kusama) and adds a flags to optionally force
enabling it.

This moves the macro related re-exports to `__private` to make it more
obvious for downstream users that they are using an internal api.

---------

Co-authored-by: command-bot <>

One for local networks with `fast-runtime` feature activated (1 minute
sessions) and one without the feature activated that will be the default
that runs with 1 hour long sessions.

**_PR migrated from https://github.com/paritytech/polkadot/pull/6782_** 

This PR will upgrade the network protocol to version 3 -> VStaging which
will later be renamed to V3. This version introduces a new kind of
assignment certificate that will be used for tranche0 assignments.
Instead of issuing/importing one tranche0 assignment per candidate,
there will be just one certificate per relay chain block per validator.
However, we will not be sending out the new assignment certificates,
yet. So everything should work exactly as before. Once the majority of
the validators have been upgraded to the new protocol version we will
enable the new certificates (starting at a specific relay chain block)
with a new client update.

There are still a few things that need to be done:

- [x] Use bitfield instead of Vec<CandidateIndex>:
https://github.com/paritytech/polkadot/pull/6802
  - [x] Fix existing approval-distribution and approval-voting tests
  - [x] Fix bitfield-distribution and statement-distribution tests
  - [x] Fix network bridge tests
  - [x] Implement todos in the code
  - [x] Add tests to cover new code
  - [x] Update metrics
  - [x] Remove the approval distribution aggression levels: TBD PR
  - [x] Parachains DB migration 
  - [x] Test network protocol upgrade on Versi
  - [x] Versi Load test
  - [x] Add Zombienet test
  - [x] Documentation updates
- [x] Fix for sending DistributeAssignment for each candidate claimed by
a v2 assignment (warning: Importing locally an already known assignment)
 - [x]  Fix AcceptedDuplicate
 - [x] Fix DB migration so that we can still keep old data.
 - [x] Final Versi burn in

---------

Signed-off-by: Andrei Sandu <[email protected]>
Signed-off-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>

This PR prepares chains specs for _native-runtime-free_  world.

This PR has following changes:
- `substrate`:
  - adds support for:
- JSON based `GenesisConfig` to `ChainSpec` allowing interaction with
runtime `GenesisBuilder` API.
- interacting with arbitrary runtime wasm blob to[
`chain-spec-builder`](https://github.com/paritytech/substrate/blob/3ef576eaeb3f42610e85daecc464961cf1295570/bin/utils/chain-spec-builder/src/lib.rs#L46)
command line util,
- removes
[`code`](https://github.com/paritytech/substrate/blob/3ef576eaeb3f42610e85daecc464961cf1295570/frame/system/src/lib.rs#L660)
from `system_pallet`
  - adds `code` to the `ChainSpec`
- deprecates
[`ChainSpec::from_genesis`](https://github.com/paritytech/substrate/blob/3ef576eaeb3f42610e85daecc464961cf1295570/client/chain-spec/src/chain_spec.rs#L263),
but also changes the signature of this method extending it with `code`
argument.
[`ChainSpec::builder()`](https://github.com/paritytech/substrate/blob/20bee680ed098be7239cf7a6b804cd4de267983e/client/chain-spec/src/chain_spec.rs#L507)
should be used instead.
- `polkadot`:
- all references to `RuntimeGenesisConfig` in `node/service` are
removed,
- all
`(kusama|polkadot|versi|rococo|wococo)_(staging|dev)_genesis_config`
functions now return the JSON patch for default runtime `GenesisConfig`,
  - `ChainSpecBuilder` is used, `ChainSpec::from_genesis` is removed,

- `cumulus`:
  - `ChainSpecBuilder` is used, `ChainSpec::from_genesis` is removed,
- _JSON_ patch configuration used instead of `RuntimeGenesisConfig
struct` in all chain specs.
  
---------

Co-authored-by: command-bot <>
Co-authored-by: Javier Viola <[email protected]>
Co-authored-by: Davide Galassi <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Kevin Krone <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

The check_hardware functions does not give us too much information as to
what is failing, so let's return the list of failed metrics, so that callers can print 
it.

This would make debugging easier, rather than try to guess which
dimension is actually failing.

Signed-off-by: Alexandru Gheorghe <[email protected]>

Fixes #768.

Fellowship companion:
https://github.com/polkadot-fellows/runtimes/pull/65

This starts the BEEFY client by default for Polkadot nodes.

Governance/sudo call is later required to enable/start consensus.

Part of https://github.com/paritytech/parity-bridges-common/issues/2420

# Description

In a couple of cases, there were links pointing to the w3f github pages
domain. In other instances, there were links pointing to the old
polkadot repo's github pages. Both of these are now pointing to the
relevant links in
https://paritytech.github.io/polkadot-sdk/book/index.html.

These changes were made specifically because the w3f github pages
returns a 404, and while fixing the links, the old polkadot repo links
were touched up as well even if they do redirect properly.

This shouldn't affect anything as these are documentation link changes
only.

[`RococoGenesisExt`](https://github.com/paritytech/polkadot-sdk/blob/a414ea75

/polkadot/node/service/src/chain_spec.rs#L152-L171)
is removed. It was the hack to allow overwriting
`EpochDurationInBlocks`. Removal of `RococGenesisExt` prevents from
manipulating the state to change the runtime constants.

Changes:
- Environment variable which controls the `time::EpochDurationInBlocks`
value was added: `ROCOCO_EPOCH_DURATION` (epoch duration will be set to
the value of env),
- `10,100,600` versions of rococo-runtime are built in CI and put into `polkadot-debug` docker image.

`rococo-runtime` building examples:
- to build runtime for `versi_staging_testnet` which had
EpochDurationInBlocks set to 100:
  ```
ROCOCO_EPOCH_DURATION=100 cargo build --features=fast-runtime -p
rococo-runtime
  ```
- to build runtime for `wococo_development`
  ```
ROCOCO_EPOCH_DURATION=10 cargo build --features=fast-runtime -p
rococo-runtime
  ```
- to build `versi-staging` chain spec:
  ```
ROCOCO_EPOCH_DURATION=100 cargo run -p polkadot --features=fast-runtime
-- build-spec --chain versi-staging --raw
  ```
- to build `wococo-dev` chain spec:
  ```
ROCOCO_EPOCH_DURATION=10 cargo run -p polkadot --features=fast-runtime
-- build-spec --chain wococo-dev --raw
  ```

It is also possible to change the epoch duration by replacing the `code` field in the chain spec with the hex dump of pre-built runtime wasm blob (because the epoch duration is hard-coded into wasm blob).

---------

Co-authored-by: Bastian Köcher <[email protected]>

Migrating [PR from the archived polkadot
repo](https://github.com/paritytech/polkadot/pull/7272)

As per
https://github.com/paritytech/polkadot/pull/7272#issuecomment-1559240466,
the changes in this MR include the following pallets into [x] Rococo and
[x] Westend runtimes:

    pallet_conviction_voting
    pallet_referenda
    pallet_ranked_collective
    pallet_custom_origins
    pallet_whitelist

And only for westend-runtime:

    pallet_treasury

Following [Kusama runtime
config](https://github.com/paritytech/polkadot/tree/dbae30efe080a1d41fe54ef4da8af47614c9ca93/runtime/kusama/src)
as a baseline.

Benchmarking of the following pallets done for both Rococo and Westend:

    pallet_conviction_voting
    pallet_referenda
    pallet_ranked_collective (only on Rococo)
    pallet_whitelist

And only for Westend:

    pallet_treasury

Removed Gov1 from Rococo as in
https://github.com/paritytech/polkadot/pull/6701

Rococo Gov1 storage will be cleaned in a different PR - [issue ](https://github.com/paritytech/polkadot-sdk/issues/1618)

---------

Co-authored-by: Giles Cope <[email protected]>