Related to https://github.com/paritytech/polkadot-sdk/issues/2787

Adding BEEFY support to the kitchensink chain in order to be able to
extend the current warp sync zombienet tests with BEEFY enabled

Follow up from #2347 this time to verify that fixtures build to RISC-V

---------

Co-authored-by: alvicsam <[email protected]>
Co-authored-by: Alexander Samusev <[email protected]>
Co-authored-by: Alexander Theißen <[email protected]>

This PR fixes a bug in the tally accrual of approvals/rejections for
Candidates and Defender. The issue happened because:
- The `match maybe_old` is reducing `weight` from the tally:
```
Some(Vote { approve: true, weight }) => tally.approvals.saturating_reduce(weight),
Some(Vote { approve: false, weight }) => tally.rejections.saturating_reduce(weight),
```
- But `match approval` is accruing only `1` to the tally:
```
true => tally.approvals.saturating_accrue(1),
false => tally.rejections.saturating_accrue(1),
```

This way, if a member is rank 1 his vote is going to have weight 1 when
accruing but weight 4 when reducing from the tally. For example, let's
say:
- There's a Candidate with 0 approvals and 12 rejections;
- A ranked Member votes against the Candidate;
- The tally changes to 0 approvals and 13 rejections (should be 16);
- The Member changes his vote to an approval;
- Now tally changes to 1 approvals and 9 rejections, removing the
accrued approvals from other Members;
- If the Member keeps changing his vote, it wipes the tally clean.

So this PR changes `match approval` to accrue `weight` instead of just
`1` and changes the tests:
- Fixes `challenges_work`. This test started failing after the fix. The
reason is that the test assumes that all Members have equal weights to
their votes, but Member 10 is ranked, so his vote should have weight 4
against the Defender. So instead of using Member 10, I added Member 50
of rank 0 to keep the same logic;
- Improves `votes_are_working`. Added some assertions to check if the
tally is correct even after a ranked Member changes his vote a couple
times;
- Fixes `waive_repay_works`. Unrelated to the bug, but this test was
yielding a false positive. The test is ranking up Member 20, but
asserting the rank of Member 10, which is already ranked up.

---------

Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: command-bot <>

Bumps the known_good_semver group with 4 updates:
[serde](https://github.com/serde-rs/serde),
[serde_json](https://github.com/serde-rs/json),
[clap](https://github.com/clap-rs/clap) and
[serde_yaml](https://github.com/dtolnay/serde-yaml).

Updates `serde` from 1.0.193 to 1.0.194
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/serde/releases">serde's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.194</h2>
<ul>
<li>Update proc-macro2 to fix caching issue when using a rustc-wrapper
such as sccache</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/serde/commit/d2d977a6c6dcff237ae956336d18b0c900c61aad"><code>d2d977a</code></a>
Release 1.0.194</li>
<li><a
href="https://github.com/serde-rs/serde/commit/a9a6ee9d7f2e3a3306ad7c7a8f21dcf369c6acb7"><code>a9a6ee9</code></a>
Pull in proc-macro2 sccache fix</li>
<li><a
href="https://github.com/serde-rs/serde/commit/28c5d215c11b66368b725f04cb92e49e4350bcdc"><code>28c5d21</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2669">#2669</a>
from dtolnay/optionifletelse</li>
<li><a
href="https://github.com/serde-rs/serde/commit/3d6a789562579fb7ea783e0d7f35530914d8baca"><code>3d6a789</code></a>
Remove option_if_let_else clippy suppression</li>
<li><a
href="https://github.com/serde-rs/serde/commit/a0e68698e33fa928f1d9f208d68b17df9f8bb568"><code>a0e6869</code></a>
Work around doc_link_with_quotes pedantic clippy lint</li>
<li>See full diff in <a
href="https://github.com/serde-rs/serde/compare/v1.0.193...v1.0.194">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_json` from 1.0.108 to 1.0.110
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/json/releases">serde_json's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.109</h2>
<ul>
<li>Documentation improvements</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/json/commit/df5cf215b70fb6341b255e7c0a210c06f64c0669"><code>df5cf21</code></a>
Release 1.0.110</li>
<li><a
href="https://github.com/serde-rs/json/commit/c35856a93c37b48b3d6efc4fec8e05554dd3f9d5"><code>c35856a</code></a>
Pull in proc-macro2 sccache fix</li>
<li><a
href="https://github.com/serde-rs/json/commit/f88bf1fccb05aa4de129675de44eb6aaf3fec0a0"><code>f88bf1f</code></a>
Release 1.0.109</li>
<li><a
href="https://github.com/serde-rs/json/commit/bb62c73ecef901e689b0a7a67ed613a32975520c"><code>bb62c73</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1097">#1097</a>
from serde-rs/doccfg</li>
<li><a
href="https://github.com/serde-rs/json/commit/df36d109fd9f9cdd22a874c0177cafec12237f95"><code>df36d10</code></a>
Restore doc cfg on re-exports</li>
<li><a
href="https://github.com/serde-rs/json/commit/c3670913423329c166add9d85ecdfc3e3da21e7a"><code>c367091</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1095">#1095</a>
from dtolnay/hashtest</li>
<li><a
href="https://github.com/serde-rs/json/commit/b328ee7df4dd772922f084600aa7cea39218b694"><code>b328ee7</code></a>
Eliminate hash closure in favor of calling hash_one directly</li>
<li><a
href="https://github.com/serde-rs/json/commit/b9bcbad3c094042f79f1a45189ec0edbb8f9f322"><code>b9bcbad</code></a>
Use BuildHasher::hash_one</li>
<li><a
href="https://github.com/serde-rs/json/commit/7ff6c9e30c2ecc2cdcf089ed86c7ccfe7a41721c"><code>7ff6c9e</code></a>
Use random hasher state for number hashing test</li>
<li><a
href="https://github.com/serde-rs/json/commit/fe031cd1de4dde5b47e0f18934632b41bd18b48d"><code>fe031cd</code></a>
Delete trace_macros! functionality from test</li>
<li>Additional commits viewable in <a
href="https://github.com/serde-rs/json/compare/v1.0.108...v1.0.110">compare
view</a></li>
</ul>
</details>
<br />

Updates `clap` from 4.4.11 to 4.4.12
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/releases">clap's
releases</a>.</em></p>
<blockquote>
<h2>v4.4.12</h2>
<h2>[4.4.12] - 2023-12-28</h2>
<h3>Performance</h3>
<ul>
<li>Only ask <code>TypedValueParser</code> for possible values if
needed</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.4.12] - 2023-12-28</h2>
<h3>Performance</h3>
<ul>
<li>Only ask <code>TypedValueParser</code> for possible values if
needed</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/6d601e6f312857d78f47741268f1748840484d4a"><code>6d601e6</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/048e7f0fbc4f8108894e4307af768c8d332a0576"><code>048e7f0</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/53f5b820988c1c03f0d2696fc144857ad461edc1"><code>53f5b82</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5267">#5267</a>
from vermiculus/sa/avoid-pv-expansion-in-help</li>
<li><a
href="https://github.com/clap-rs/clap/commit/05cd057978db743a65fb5fde33213af752d064e7"><code>05cd057</code></a>
perf: Avoid retrieving possible_values unless used</li>
<li><a
href="https://github.com/clap-rs/clap/commit/29208083b0598ba7d1b80e79821c0ba3eb2342ce"><code>2920808</code></a>
test: Update snapshots</li>
<li><a
href="https://github.com/clap-rs/clap/commit/28763ebb6d8714f6ca588bf477729040e0e760b0"><code>28763eb</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/ace7bb5b4570b030f7c2d0fa91e0afaaac1b0030"><code>ace7bb5</code></a>
docs(complete): Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/76beca4d4d42a817bbb578f23553c64ded2aea97"><code>76beca4</code></a>
docs(complete): Polish API reference for dynamic</li>
<li><a
href="https://github.com/clap-rs/clap/commit/3630e582d3ec59912b8e9369c38687695ddb1f43"><code>3630e58</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5273">#5273</a>
from epage/docsrs</li>
<li><a
href="https://github.com/clap-rs/clap/commit/3724b9e2e4c2a2e69337b6d809949b246d3fef39"><code>3724b9e</code></a>
docs: Include more content on docs.rs</li>
<li>See full diff in <a
href="https://github.com/clap-rs/clap/compare/v4.4.11...v4.4.12">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_yaml` from 0.9.29 to 0.9.30
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/serde-yaml/releases">serde_yaml's
releases</a>.</em></p>
<blockquote>
<h2>0.9.30</h2>
<ul>
<li>Update proc-macro2 to fix caching issue when using a rustc-wrapper
such as sccache</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/09ee25156f608f95150b27edd120bd5471db3c64"><code>09ee251</code></a>
Release 0.9.30</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/caea939ece85ab54ac41de0672d683905f1e406a"><code>caea939</code></a>
Pull in proc-macro2 sccache fix</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/d255918c141fd72d01f169bb5aa0152234981699"><code>d255918</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/serde-yaml/issues/403">#403</a>
from dtolnay/optionifletelse</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/8cfeedd766f83dab24d03b9fb11b72886a247425"><code>8cfeedd</code></a>
Remove option_if_let_else clippy suppression</li>
<li>See full diff in <a
href="https://github.com/dtolnay/serde-yaml/compare/0.9.29...0.9.30">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

cc https://github.com/paritytech/polkadot-sdk/issues/2812
cc https://github.com/polkadot-fellows/RFCs/pull/56

Since this is a one line of code change, and for the sake of this not
taking six months to be done, I've opted to open a PR myself.

---------

Co-authored-by: Aaro Altonen <[email protected]>

Pulling PartialComponents into a named `Service` type stops clippy
complaining about type complexity and also makes the type signatures a
little less scary to read.

There's two instances where we can't pull it out into a type because a
nightly feature has not yet been stabilised (E.g. the `imp Fn` isn't
stabilised in a type alias context here:
https://github.com/paritytech/polkadot-sdk/blob/d84e135b

/polkadot/node/service/src/lib.rs#L477
).

---------

Co-authored-by: Bastian Köcher <[email protected]>

With the current code, when a user interlaces their region, the end
result will be three regions in the state:
- the non-interlaced region
- first part of the interlaced region
- second part of the interlaced region

The existing implementation retains the non-interlaced region in the
state, leading to a problematic scenario:

1. User 1 acquires a region from the market.
2. User 1 then interlaces this region.
3. Subsequently, User 1 transfers one part of the interlaced regions to
User 2.
Despite this transfer, User 1 retains the ability to assign the entire
original non-interlaced region, which is inconsistent with the fact that
they no longer own one of the interlaced parts.

This PR resolves the issue by removing the original region, ensuring
that only the two new interlaced regions remain in the state.

Bumps the known_good_semver group with 2 updates:
[syn](https://github.com/dtolnay/syn) and
[serde_yaml](https://github.com/dtolnay/serde-yaml).

Updates `syn` from 2.0.41 to 2.0.43
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/syn/releases">syn's
releases</a>.</em></p>
<blockquote>
<h2>2.0.43</h2>
<ul>
<li>Insert trailing comma if not already present when printing a 1-tuple
in pattern position (<a
href="https://redirect.github.com/dtolnay/syn/issues/1553">#1553</a>)</li>
</ul>
<h2>2.0.42</h2>
<ul>
<li>Documentation improvements</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/syn/commit/95ee05214030f936b8db3ee295188d5dc2c89621"><code>95ee052</code></a>
Release 2.0.43</li>
<li><a
href="https://github.com/dtolnay/syn/commit/7383e81b1ab6f9983692ebd9d6caa54aeff8fb85"><code>7383e81</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1559">#1559</a>
from dtolnay/pattuple</li>
<li><a
href="https://github.com/dtolnay/syn/commit/712fde5a6fce0e7bee3615ab5c7545ce442bf034"><code>712fde5</code></a>
Fix ToTokens for PatTuple to insert trailing comma</li>
<li><a
href="https://github.com/dtolnay/syn/commit/ed9b94e3395cffb33db4254439e23dbc3a2e9e43"><code>ed9b94e</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1558">#1558</a>
from dtolnay/tupletests</li>
<li><a
href="https://github.com/dtolnay/syn/commit/ec8517b33c137c48c38b74ba5be21815763a50f5"><code>ec8517b</code></a>
Add tuple comma tests</li>
<li><a
href="https://github.com/dtolnay/syn/commit/3cf16c76bdbe4e16261a167592a77edab853c6aa"><code>3cf16c7</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1557">#1557</a>
from dtolnay/snapshotparsequote</li>
<li><a
href="https://github.com/dtolnay/syn/commit/553549ff12358a6ad95baaed2601a9dab541d693"><code>553549f</code></a>
Generalize snapshot parsing to types that do not implement Parse</li>
<li><a
href="https://github.com/dtolnay/syn/commit/f9ad833e4a77c61003861f4e14d16b10b9708f9e"><code>f9ad833</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1556">#1556</a>
from dtolnay/punctuatedsnapshot</li>
<li><a
href="https://github.com/dtolnay/syn/commit/131b40ba2904ec8755bb34466f369072dc34d588"><code>131b40b</code></a>
Debug impl for punctuated::Pairs superseded by Punctuated</li>
<li><a
href="https://github.com/dtolnay/syn/commit/3f12d652a8871955a7e27e0369933288bc387dd5"><code>3f12d65</code></a>
Include punctuation tokens in snapshot tests containing Punctuated</li>
<li>Additional commits viewable in <a
href="https://github.com/dtolnay/syn/compare/2.0.41...2.0.43">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_yaml` from 0.9.27 to 0.9.29
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/serde-yaml/releases">serde_yaml's
releases</a>.</em></p>
<blockquote>
<h2>0.9.29</h2>
<ul>
<li>Turn on <code>deny(unsafe_op_in_unsafe_fn)</code> lint</li>
</ul>
<h2>0.9.28</h2>
<ul>
<li>Update <code>unsafe-libyaml</code> dependency to pull in unaligned
write fix</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/b957d2b15d7f3d96279997800fa0610b41b8fe00"><code>b957d2b</code></a>
Release 0.9.29</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/007fc2d5c1987847a0f1ac95885c56f8e6e5f808"><code>007fc2d</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/serde-yaml/issues/401">#401</a>
from dtolnay/unsafeop</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/5bac2475b0017d6a635d641df17165d71b951f0e"><code>5bac247</code></a>
Fill in unsafe blocks inside unsafe functions</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/0f6dba18ab8db598c4963e9242afd490ee0202f0"><code>0f6dba1</code></a>
Turn on deny(unsafe_op_in_unsafe_fn)</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/1b6e44837f0db0a1c15537311fed3579a7e8c6d2"><code>1b6e448</code></a>
Release 0.9.28</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/ec1a3145d7b6b809f7b3aa2d9dcd7db30f0588d4"><code>ec1a314</code></a>
Force unsafe-libyaml version that contains unaligned write fix</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/a6b2dc075a6eb1bed0d927df7b7ac2bb288f3bb4"><code>a6b2dc0</code></a>
Update name of blocks_in_if_conditions clippy lint</li>
<li>See full diff in <a
href="https://github.com/dtolnay/serde-yaml/compare/0.9.27...0.9.29">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Resolves https://github.com/paritytech/polkadot-sdk/issues/2627

Initializes voter _after_ headers sync finishes in the background.

This enables the BEEFY gadget to work with `--sync warp` (GRANDPA warp
sync).

Co-authored-by: Adrian Catangiu <[email protected]>

And have proper benchmarks.

---------

Co-authored-by: eskimor <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: joe petrowski <[email protected]>

Adds more logging to the XCM execution for better debugging.

fix typos in the comments of `pallet-broker`

Found some areas for improvement while working on
https://github.com/polkadot-fellows/runtimes/pull/122.

## Improvements

- If multiple keys in a storage item (e.g. a map) are undecodable,
return all the undecodable keys rather than only the first one found
- Include the key of the undecodable storage in the INFO log
- Write output as hex string where appropriate
- Write INFO log on successful decoding

Rococo and Westend runtimes for the "People Chain". This chain contains
the Identity pallet with plans to migrate all related data from the
Relay Chain.

Changes `IdentityInfo` to:

- Remove `additional_fields`.
- Add `github` and `discord` as first class fields. From scraping chain
data, these were the only two additional fields used (for the Fellowship
and Ambassador Program, respectively).
- Rename `riot` to `matrix`.

Note: This will use the script in
https://github.com/paritytech/polkadot-sdk/pull/2025 to generate the
genesis state.

TODO:

- [x] https://github.com/paritytech/polkadot-sdk/pull/1814 and
integration of the Identity Migrator pallet for migration.
- [x] Tests: https://github.com/paritytech/polkadot-sdk/pull/2373

---------

Co-authored-by: Muharem <[email protected]>
Co-authored-by: Michal Kucharczyk <[email protected]>
Co-authored-by: Dónal Murray <[email protected]>
Co-authored-by: Richard Melkonian <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>

Closes #416

As I mentioned in the above issue `balance_to_points` conversion
currently overflows the `Balance` types even before computing the actual
points for the given tokens. This fixes that,

Even though it is difficult to overflow the sufficients variable, since
an attacker that is willing to rapidly increase the number must every
time deposit a minimum deposit of a given asset, it is safer to use
saturating_add().

---------

Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: joe petrowski <[email protected]>

This changes `pallet-sudo` to also accept `Root` origin for
`ensure_sudo`. This can be useful for parachains who allow the relay
chain to have superuser rights to setup the sudo pallet for example.

Also fixes: https://github.com/paritytech/polkadot-sdk/issues/1417

- [x] CoreIndex -> AssignmentProvider mapping will be able to change any
time.
- [x] Implement
- [x] Provide Migrations
- [x] Add and fix tests
- [x] Implement bulk assigner logic
- [x] bulk assigner tests
- [x] Port over current assigner to use bulk designer (+ share on-demand
with bulk): top-level assigner has core ranges: legacy, bulk
- [x] Adjust migrations to reflect new assigner structure
- [x] Move migration code to Assignment code directly and make it
recursive (make it possible to skip releases) -> follow up ticket.
- [x] Test migrations
- [x] Add migration PR to runtimes repo -> follow up ticket.
- [x] Wire up with actual UMP messages
- [x] Write PR docs

---------

Co-authored-by: eskimor <[email protected]>
Co-authored-by: Bradley Olson <[email protected]>
Co-authored-by: BradleyOlson64 <[email protected]>
Co-authored-by: Anton Vilhelm Ásgeirsson <[email protected]>
Co-authored-by: antonva <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Marcin S. <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: command-bot <>

Many clippy lints usually enforced by `-Dcomplexity` and `-Dcorrectness`
are not caught by CI as they are gated by `features`, like
`runtime-benchmarks`, while the clippy CI job runs with only the default
features for all targets.

This PR also adds a CI step to run clippy with `--all-features` to
ensure the code quality is maintained behind feature gates from now on.

To improve local development, clippy lints are downgraded to warnings,
but they still will result in an error at CI due to the `-Dwarnings`
rustflag.

---------

Co-authored-by: Liam Aharon <[email protected]>

Adds the `authorize_upgrade` -> `enact_authorized_upgrade` pattern to
`frame-system`. This will be useful for upgrading bridged chains that
are under the governance of Polkadot without passing entire runtime Wasm
blobs over a bridge.

Notes:

- Changed `enact_authorized_upgrade` to `apply_authorized_upgrade`.
Personal opinion, "apply" more accurately expresses what it's doing. Can
change back if outvoted.
- Remove `check_version` in favor of two extrinsics, so as to make
_checked_ the default.
- Left calls in `parachain-system` and marked as deprecated to prevent
breaking the API. They just call into the `frame-system` functions.
- Updated `frame-system` benchmarks to v2 syntax.

---------

Co-authored-by: command-bot <>

this breaks cargo vendor which is necessary for building polkadot with
nix

closes https://github.com/paritytech/polkadot-sdk/issues/1842

Decoupling Pallet from the Concept of Native Currency

Currently, the pallet is intrinsically linked with the concept of native
currency, requiring users to provide implementations of the
`fungible::*` and `fungibles::*` traits to interact with native and non
native assets. This incapsulates some non-related to the pallet
complexity and makes it less adaptable in contexts where the native
currency concept is absent.

With this PR, the dependence on `fungible::*` for liquidity-supplying
assets has been removed. Instead, the native and non-native currencies'
handling is now overseen by a single type that implements the
`fungibles::*` traits. To simplify this integration, types have been
introduced to facilitate the creation of a union between `fungible::*`
and `fungibles::*` implementations, producing a unified `fungibles::*`
type.

One of the reasons driving these changes is the ambition to create a
more user-friendly API for the `SwapCredit` implementation. Given that
it interacts with two distinct credit types from `fungible` and
`fungibles`, a unified type was introduced. Clients now manage potential
conversion failures for those credit types. In certain contexts, it's
vital to guarantee that operations are fail-safe, like in this impl -
[PR](https://github.com/paritytech/polkadot-sdk/pull/1845), place in
[code](https://github.com/paritytech/polkadot-sdk/blob/20b85a5f

/cumulus/primitives/utility/src/lib.rs#L429).

Additional Updates:
- abstracted the pool ID and its account derivation logic via trait
bounds, along with common implementation offerings;
- removed `inc_providers` on a pool creation for the pool account;
- benchmarks:
-- swap complexity is N, not const;
-- removed `From<u128> + Into<u128>` bound from `T::Balance`;
-- removed swap/liquidity/.. amount constants, resolve them dynamically
based on pallet configuration;
-- migrated to v2 API;
- `OnUnbalanced` handler for the pool creation fee, replacing direct
transfers to a specified account ID;
- renamed `MultiAssetId` to `AssetKind` aligning with naming across
frame crates;

related PRs:
- (depends) https://github.com/paritytech/polkadot-sdk/pull/1677
- (caused) https://github.com/paritytech/polkadot-sdk/pull/2033
- (caused) https://github.com/paritytech/polkadot-sdk/pull/1876

---------

Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>

Bumps [chrono](https://github.com/chronotope/chrono) from 0.4.27 to
0.4.31.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/chronotope/chrono/releases">chrono's
releases</a>.</em></p>
<blockquote>
<h2>0.4.31</h2>
<p>Another maintenance release.
It was not a planned effort to improve our support for UNIX timestamps,
yet most PRs seem related to this.</p>
<h3>Deprecations</h3>
<ul>
<li>Deprecate <code>timestamp_nanos</code> in favor of the non-panicking
<code>timestamp_nanos_opt</code> (<a
href="https://redirect.github.com/chronotope/chrono/issues/1275">#1275</a>)</li>
</ul>
<h3>Additions</h3>
<ul>
<li>Add <code>DateTime::&lt;Utc&gt;::from_timestamp</code> (<a
href="https://redirect.github.com/chronotope/chrono/issues/1279">#1279</a>,
thanks <a
href="https://github.com/demurgos"><code>@​demurgos</code></a>)</li>
<li>Add <code>TimeZone::timestamp_micros</code> (<a
href="https://redirect.github.com/chronotope/chrono/issues/1285">#1285</a>,
thanks <a
href="https://github.com/emikitas"><code>@​emikitas</code></a>)</li>
<li>Add <code>DateTime&lt;Tz&gt;::timestamp_nanos_opt</code> and
<code>NaiveDateTime::timestamp_nanos_opt</code> (<a
href="https://redirect.github.com/chronotope/chrono/issues/1275">#1275</a>)</li>
<li>Add <code>UNIX_EPOCH</code> constants (<a
href="https://redirect.github.com/chronotope/chrono/issues/1291">#1291</a>)</li>
</ul>
<h3>Fixes</h3>
<ul>
<li>Format day of month in RFC 2822 without padding (<a
href="https://redirect.github.com/chronotope/chrono/issues/1272">#1272</a>)</li>
<li>Don't allow strange leap seconds which are not on a minute boundary
initialization methods (<a
href="https://redirect.github.com/chronotope/chrono/issues/1283">#1283</a>)
This makes many methods a little more strict:
<ul>
<li><code>NaiveTime::from_hms_milli</code></li>
<li><code>NaiveTime::from_hms_milli_opt</code></li>
<li><code>NaiveTime::from_hms_micro</code></li>
<li><code>NaiveTime::from_hms_micro_opt</code></li>
<li><code>NaiveTime::from_hms_nano</code></li>
<li><code>NaiveTime::from_hms_nano_opt</code></li>
<li><code>NaiveTime::from_num_seconds_from_midnight</code></li>
<li><code>NaiveTime::from_num_seconds_from_midnight_opt</code></li>
<li><code>NaiveDate::and_hms_milli</code></li>
<li><code>NaiveDate::and_hms_milli_opt</code></li>
<li><code>NaiveDate::and_hms_micro</code></li>
<li><code>NaiveDate::and_hms_micro_opt</code></li>
<li><code>NaiveDate::and_hms_nano</code></li>
<li><code>NaiveDate::and_hms_nano_opt</code></li>
<li><code>NaiveDateTime::from_timestamp</code></li>
<li><code>NaiveDateTime::from_timestamp_opt</code></li>
<li><code>TimeZone::timestamp</code></li>
<li><code>TimeZone::timestamp_opt</code></li>
</ul>
</li>
<li>Fix underflow in <code>NaiveDateTime::timestamp_nanos_opt</code> (<a
href="https://redirect.github.com/chronotope/chrono/issues/1294">#1294</a>,
thanks <a
href="https://github.com/crepererum"><code>@​crepererum</code></a>)</li>
</ul>
<h3>Documentation</h3>
<ul>
<li>Add more documentation about the RFC 2822 obsolete date format (<a
href="https://redirect.github.com/chronotope/chrono/issues/1267">#1267</a>)</li>
</ul>
<h3>Internal</h3>
<ul>
<li>Remove internal <code>__doctest</code> feature and
<code>doc_comment</code> dependency (<a
href="https://redirect.github.com/chronotope/chrono/issues/1276">#1276</a>)</li>
<li>CI: Bump <code>actions/checkout</code> from 3 to 4 (<a
href="https://redirect.github.com/chronotope/chrono/issues/1280">#1280</a>)</li>
<li>Optimize <code>NaiveDate::add_days</code> for small values (<a
href="https://redirect.github.com/chronotope/chrono/issues/1214">#1214</a>)</li>
<li>Upgrade <code>pure-rust-locales</code> to 0.7.0 (<a
href="https://redirect.github.com/chronotope/chrono/issues/1288">#1288</a>,
thanks <a href="https://github.com/jeremija"><code>@​jeremija</code></a>
wo did good improvements on <code>pure-rust-locales</code>)</li>
</ul>
<p>Thanks to all contributors on behalf of the chrono team, <a
href="https://github.com/djc"><code>@​djc</code></a> and <a
href="https://github.com/pitdicker"><code>@​pitdicker</code></a>!</p>
<h2>0.4.30</h2>
<p>In this release, we have decided to swap out the
<code>chrono::Duration</code> type (which has been a re-export of time
0.1 <code>Duration</code> type) with our own definition, which exposes a
strict superset of the <code>time::Duration</code> API. This helps avoid
warnings about the [CVE-2020-26235] and [RUSTSEC-2020-0071] advisories
for downstream users and allows us to improve the <code>Duration</code>
API going forward.</p>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/chronotope/chrono/commit/e730c6ac45649a6a636abf30b796304bc46ecd15"><code>e730c6a</code></a>
Bump version to 0.4.31</li>
<li><a
href="https://github.com/chronotope/chrono/commit/2afdde8f7f23f087b5027662e2882dba0663fef7"><code>2afdde8</code></a>
fix: underflow during datetime-&gt;nanos conversion</li>
<li><a
href="https://github.com/chronotope/chrono/commit/46ad2c2b2c901eb20e43a7fca025aac02605bda4"><code>46ad2c2</code></a>
Add <code>UNIX_EPOCH</code> constants</li>
<li><a
href="https://github.com/chronotope/chrono/commit/1df8db3a547bf50929d3d1774306f996b63e9e7c"><code>1df8db3</code></a>
Add TimeZone::timestamp_micros</li>
<li><a
href="https://github.com/chronotope/chrono/commit/861d4e12487181e71744478a320db20f56bd61af"><code>861d4e1</code></a>
Make TimeZone::timestamp_millis_opt use</li>
<li><a
href="https://github.com/chronotope/chrono/commit/3c4846a88235a38105a047b0acd34ce239a1cfb5"><code>3c4846a</code></a>
Upgrade pure-rust-locales to 0.7.0</li>
<li><a
href="https://github.com/chronotope/chrono/commit/6665804676e55e9e2375eed7c10cc9e0910abf11"><code>6665804</code></a>
Deny leap second if secs != 59 in
<code>from_num_seconds_from_midnight_opt</code></li>
<li><a
href="https://github.com/chronotope/chrono/commit/61b7ffbb7a95df577c308eb0f2ab5c68e1566cf1"><code>61b7ffb</code></a>
Deny leap second if secs != 59 in <code>from_hms_nano_opt</code></li>
<li><a
href="https://github.com/chronotope/chrono/commit/202af6cfda9bfdb195dc96377fcdeee7ed024b65"><code>202af6c</code></a>
Don't generate leap seconds that are not 60 in NaiveTime's Arbitrary
impl</li>
<li><a
href="https://github.com/chronotope/chrono/commit/60283ab55cbc9ea6caa86e19bf5da2c086cdf4bc"><code>60283ab</code></a>
Don't create strange leap seconds in tests</li>
<li>Additional commits viewable in <a
href="https://github.com/chronotope/chrono/compare/v0.4.27...v0.4.31">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=chrono&package-manager=cargo&previous-version=0.4.27&new-version=0.4.31)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Introduces a swap implementation that allows the exchange of a credit
(aka Negative Imbalance) of one asset for a credit of another asset.

This is particularly useful when a credit swap is required but may not
have sufficient value to meet the ED constraint, hence cannot be
deposited to temp account before. An example use case is when XCM fees
are paid using an asset held in the XCM executor registry and has to be
swapped for native currency.

Additional Updates:
- encapsulates the existing `Swap` trait impl within a transactional
context, since partial storage mutation is possible when an error
occurs;
- supplied `Currency` and `Assets` impls must be implemented over the
same `Balance` type, the `AssetBalance` generic type is dropped. This
helps to avoid numerous type conversion and overflow cases. If those
types are different it should be handled outside of the pallet;
- `Box` asset kind on a pallet level, unbox on a runtime level - here
[why](https://substrate.stackexchange.com/questions/10039/boxed-argument-of-a-dispatchable/10103#10103);
- `path` uses `Vec` now, instead of `BoundedVec` since it is never used
in PoV;
- removes the `Transfer` event due to it's redundancy with the events
emitted by `fungible/s` implementations;
- modifies the `SwapExecuted` event type;

related issue: 
- https://github.com/paritytech/polkadot-sdk/issues/105

related PRs:
- (required for) https://github.com/paritytech/polkadot-sdk/pull/1845
- (caused) https://github.com/paritytech/polkadot-sdk/pull/1717

// DONE make the pallet work only with `fungibles` trait and make it
free from the concept of a `native` asset -
https://github.com/paritytech/polkadot-sdk/issues/1842

---------

Co-authored-by: joe petrowski <[email protected]>

Use `contains_key` to not require decoding the actual value.

New runtimes for the Coretime Chain (a.k.a. "Broker Chain") described in
RFC-1.

Replaces https://github.com/paritytech/cumulus/pull/2889


- [x] Add Agile Coretime pallet
https://github.com/paritytech/substrate/pull/14568
- [x] Generate chain specs for local and testnets
- [x] Deploy parachain on Rococo - Done:
[rococo-coretime-rpc.polkadot.io](https://polkadot.js.org/apps/?rpc=wss%3A%2F%2Frococo-coretime-rpc.polkadot.io#/explorer)

DevOps issue for Aura keygen:
https://github.com/paritytech/devops/issues/2725

Edit (Dónal): This PR is mainly for Rococo, the Westend runtime is a
shell with no `Broker` pallet. The Rococo runtime has the broker calls
filtered for initial deployment.

---------

Co-authored-by: Dónal Murray <[email protected]>
Co-authored-by: 0xmovses <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Marcin S. <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Branislav Kontur <[email protected]>

When we call the `set_accept_ownership` method, we increase the number
of account consumers, but then we don't decrease it on collection
transfer, which leads to the wrong consumers number an account has.

Introduces `UnionOf` types, crafted to merge `fungible` and `fungibles`
implementations or two `fungibles` implementations into a single type
implementing `fungibles`.

This also addresses an issue where `ItemOf` initiates a double drop for
an imbalance type, leading to inaccurate total issuance accounting.

Find the application of these types in this PR -
[link](https://github.com/paritytech/polkadot-sdk/pull/2031), places in
code -
[1](https://github.com/paritytech/polkadot-sdk/blob/4ec7496f/cumulus/parachains/runtimes/assets/asset-hub-kusama/src/lib.rs#L327),
[2](https://github.com/paritytech/polkadot-sdk/blob/4ec7496f

/cumulus/parachains/runtimes/assets/asset-hub-kusama/src/lib.rs#L343).

---------

Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: joepetrowski <[email protected]>

Follow-up on https://github.com/paritytech/polkadot-sdk/pull/2716

Sorry, small miss

This PR contains just a few clippy fixes and nits, which are, however,
relaxed by workspace clippy settings here:
https://github.com/paritytech/polkadot-sdk/blob/master/Cargo.toml#L483-L506

---------

Co-authored-by: Dmitry Sinyavin <[email protected]>
Co-authored-by: ordian <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Bastian Köcher <[email protected]>

Bumps [async-trait](https://github.com/dtolnay/async-trait) from 0.1.73
to 0.1.74.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/async-trait/releases">async-trait's
releases</a>.</em></p>
<blockquote>
<h2>0.1.74</h2>
<ul>
<li>Documentation improvements</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/async-trait/commit/265979b07a9af573e1edd3b2a9b179533cfa7a6c"><code>265979b</code></a>
Release 0.1.74</li>
<li><a
href="https://github.com/dtolnay/async-trait/commit/5e677097d2e67f7a5c5e3023e2f3b99b36a9e132"><code>5e67709</code></a>
Fix doc test when async fn in trait is natively supported</li>
<li><a
href="https://github.com/dtolnay/async-trait/commit/ef144aed28b636eb65759505b2323afc4c753fbe"><code>ef144ae</code></a>
Update ui test suite to nightly-2023-10-15</li>
<li><a
href="https://github.com/dtolnay/async-trait/commit/9398a28d6fc977ccf8c286bd85b4b87a883f92ac"><code>9398a28</code></a>
Test docs.rs documentation build in CI</li>
<li><a
href="https://github.com/dtolnay/async-trait/commit/8737173dafa371e5e9e491d736513be1baf697f4"><code>8737173</code></a>
Update ui test suite to nightly-2023-09-24</li>
<li><a
href="https://github.com/dtolnay/async-trait/commit/5ba643c001a55f70c4a44690e040cdfab873ba56"><code>5ba643c</code></a>
Test dyn Trait containing async fn</li>
<li><a
href="https://github.com/dtolnay/async-trait/commit/247c8e7b0b3ff69c9518ebf93e69fe74d47f17b6"><code>247c8e7</code></a>
Add ui test testing the recommendation to use async-trait</li>
<li><a
href="https://github.com/dtolnay/async-trait/commit/799db66a84834c403860df4a8c0227d8fb7f9d9d"><code>799db66</code></a>
Update ui test suite to nightly-2023-09-23</li>
<li><a
href="https://github.com/dtolnay/async-trait/commit/0e60248011f751d8ccf58219d0a79aacfe9619f1"><code>0e60248</code></a>
Update actions/checkout@v3 -&gt; v4</li>
<li><a
href="https://github.com/dtolnay/async-trait/commit/7fcbc83993d5ef483d048c271a7f6c4ac8c98388"><code>7fcbc83</code></a>
Update ui test suite to nightly-2023-08-29</li>
<li>See full diff in <a
href="https://github.com/dtolnay/async-trait/compare/0.1.73...0.1.74">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=async-trait&package-manager=cargo&previous-version=0.1.73&new-version=0.1.74)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

A small PR to publicly expose the `pallet_uniques` state that is not
accessible through the nonfungibles implementation.

Currently, this state is unreachable from chain extensions.

Example currently broken. 

It writes something to the given path, but not the full chain spec.

---------

Co-authored-by: Michal Kucharczyk <[email protected]>

closes https://github.com/paritytech-secops/srlabs_findings/issues/78.

Removes `BetterUnsignedThreshold` from pallet EPM. This will essentially
mean any solution submitted by the validator that is strictly better
than the current queued solution would be accepted.

The reason for having these thresholds is to limit number of solutions
submitted on-chain. However for unsigned submissions, the number of
solutions that could be submitted on average is limited even without
thresholding (calculation shown in the corresponding issue).

Fixes #https://github.com/paritytech/polkadot-sdk/issues/2699

Modifying `expect_validator_set()` in order to be able to walk back
until block 0. The chain state at block 0 is available even if we use
`--sync fast` or `--sync warp`. This way we can retrieve the initial
authority set even when BEEFY genesis is 1 and there is no authority
change entry in the headers log.

Credits to @acatangiu

 for the solution

---------

Co-authored-by: Adrian Catangiu <[email protected]>