This commit introduces a new concept called `NotificationService` which
allows Polkadot protocols to communicate with the underlying
notification protocol implementation directly, without routing events
through `NetworkWorker`. This implies that each protocol has its own
service which it uses to communicate with remote peers and that each
`NotificationService` is unique with respect to the underlying
notification protocol, meaning `NotificationService` for the transaction
protocol can only be used to send and receive transaction-related
notifications.

The `NotificationService` concept introduces two additional benefits:
  * allow protocols to start using custom handshakes
  * allow protocols to accept/reject inbound peers

Previously the validation of inbound connections was solely the
responsibility of `ProtocolController`. This caused issues with light
peers and `SyncingEngine` as `ProtocolController` would accept more
peers than `SyncingEngine` could accept which caused peers to have
differing views of their own states. `SyncingEngine` would reject excess
peers but these rejections were not properly communicated to those peers
causing them to assume that they were accepted.

With `NotificationService`, the local handshake is not sent to remote
peer if peer is rejected which allows it to detect that it was rejected.

This commit also deprecates the use of `NetworkEventStream` for all
notification-related events and going forward only DHT events are
provided through `NetworkEventStream`. If protocols wish to follow each
other's events, they must introduce additional abtractions, as is done
for GRANDPA and transactions protocols by following the syncing protocol
through `SyncEventStream`.

Fixes https://github.com/paritytech/polkadot-sdk/issues/512
Fixes https://github.com/paritytech/polkadot-sdk/issues/514
Fixes https://github.com/paritytech/polkadot-sdk/issues/515
Fixes https://github.com/paritytech/polkadot-sdk/issues/554
Fixes https://github.com/paritytech/polkadot-sdk/issues/556

---
These changes are transferred from
https://github.com/paritytech/substrate/pull/14197 but there are no
functional changes compared to that PR

---------

Co-authored-by: Dmitry Markin <[email protected]>
Co-authored-by: Alexandru Vasile <[email protected]>

Step in https://github.com/paritytech/polkadot-sdk/issues/171

This PR adds `derive_impl` on all `frame_system` config impls for mock
runtimes. The overridden configs are maintained as of now to ensure
minimal changes.

---------

Co-authored-by: Oliver Tale-Yazdi <[email protected]>

This moves the macro related re-exports to `__private` to make it more
obvious for downstream users that they are using an internal api.

---------

Co-authored-by: command-bot <>

This PR introduces:
- XCM  host functions `xcm_send`, `xcm_execute`
- An Xcm trait into the config. that proxy these functions to to
`pallet_xcm`, or disable their usage by using `()`.
- A mock_network and xcm_test files to test the newly added xcm-related
functions.

---------

Co-authored-by: Keith Yeung <[email protected]>
Co-authored-by: Sasha Gryaznov <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Alexander Theißen <[email protected]>

Small PR that introduce a new crate that will host RISC-V & wasm
fixtures for testing pallet-contracts

# Description
We derive few useful traits on `ErrorOrigin` and `ExecError`, including
`codec::Encode` and `codec::Decode`, so that `ExecResult` is
en/decodable as well. This is required for a contract mocking feature
(already prepared in drink:
https://github.com/Cardinal-Cryptography/drink/pull/61). In more detail:
`ExecResult` must be passed from runtime extension, through runtime
interface, back to the pallet, which requires that it is serializable to
bytes in some form (or implements some rare, auxiliary traits).

**Impact on runtime size**: Since most of these traits is used directly
in the pallet now, compiler should be able to throw it out (and thus we
bring no new overhead). However, they are very useful in secondary tools
like drink or other testing libraries.

# Checklist

- [x] My PR includes a detailed description as outlined in the
"Description" section above
- [ ] My PR follows the [labeling requirements](CONTRIBUTING.md#Process)
of this project (at minimum one label for `T`
  required)
- [x] I have made corresponding changes to the documentation (if
applicable)
- [x] I have added tests that prove my fix is effective or that my
feature works (if applicable)

Restore fix from #2077

Runtime migration CI is currently failing
(https://gitlab.parity.io/parity/mirrors/polkadot-sdk/builds/4122083)
for the contracts testnet due to unnecessary panicing in a `pre_upgrade`
hook.

Soon idempotency will be enforced
https://github.com/paritytech/try-runtime-cli/issues/42, in the mean
time we need to manually fix these issues as they arise.

---

also removes backticks from the string in `echo`, which caused a
'command not found' error in ci output

Project that includes pallet-contracts via crates.io will fail to run 
```bash
cargo check --features=runtime-benchmarks
```

without the currently not included benchmarks files

closes https://github.com/paritytech/polkadot-sdk/issues/1882

## Breaking Changes

This PR introduces a new item to `pallet_balances::Config`:

```diff
trait Config {
++    type RuntimeFreezeReasons;
}
```

This value is only used to check it against `type MaxFreeze`. A similar
check has been added for `MaxHolds` against `RuntimeHoldReasons`, which
is already given to `pallet_balances`.

In all contexts, you should pass the real `RuntimeFreezeReasons`
generated by `construct_runtime` to `type RuntimeFreezeReasons`. Passing
`()` would also work, but it would imply that the runtime uses no
freezes at all.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

The `xcm` crate was renamed to `staging-xcm` to be able to publish it to
crates.io as someone as squatted `xcm`. The problem with this rename is
that the `TypeInfo` includes the crate name which ultimately lands in
the metadata. The metadata is consumed by downstream users like
`polkadot-js` or people building on top of `polkadot-js`. These people
are using the entire `path` to find the type in the type registry. Thus,
their code would break as the type path would now be [`staging_xcm`,
`VersionedXcm`] instead of [`xcm`, `VersionedXcm`]. This pull request
fixes this by renaming the path segment `staging_xcm` to `xcm`.

This requires: https://github.com/paritytech/scale-info/pull/197

---------

Co-authored-by: Francisco Aguirre <[email protected]>

Co-authored-by: command-bot <>

Bumps the known_good_semver group with 1 update:
[syn](https://github.com/dtolnay/syn).

<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/syn/releases">syn's
releases</a>.</em></p>
<blockquote>
<h2>2.0.38</h2>
<ul>
<li>Fix <em>&quot;method 'peek' has an incompatible type for
trait&quot;</em> error when defining <code>bool</code> as a custom
keyword (<a
href="https://redirect.github.com/dtolnay/syn/issues/1518">#1518</a>,
thanks <a
href="https://github.com/Vanille-N"><code>@​Vanille-N</code></a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/syn/commit/43632bfb6c78ee1f952645a268ab1ac4af162977"><code>43632bf</code></a>
Release 2.0.38</li>
<li><a
href="https://github.com/dtolnay/syn/commit/abd2c214b44da64a5e420d72919308300eebc23d"><code>abd2c21</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1518">#1518</a>
from Vanille-N/master</li>
<li><a
href="https://github.com/dtolnay/syn/commit/6701e6077e15013ef34b15e3ffdae2657e499d83"><code>6701e60</code></a>
Absolute path to <code>bool</code> in
<code>custom_punctuation.rs</code></li>
<li><a
href="https://github.com/dtolnay/syn/commit/7313d242398111423f046386aa0a75548f63d236"><code>7313d24</code></a>
Resolve single_match_else pedantic clippy lint in code generator</li>
<li><a
href="https://github.com/dtolnay/syn/commit/67ab64f3c09e17b23493c7cda498e7edb8830f21"><code>67ab64f</code></a>
Include unexpected token in the test failure message</li>
<li><a
href="https://github.com/dtolnay/syn/commit/137ae33486de3f2652487f8f64436ad1429df496"><code>137ae33</code></a>
Check no remaining token after the first literal</li>
<li><a
href="https://github.com/dtolnay/syn/commit/258e9e8a11d188c1ee1ffb2b069819239999f9ac"><code>258e9e8</code></a>
Ignore single_match_else pedantic clippy lint in test</li>
<li><a
href="https://github.com/dtolnay/syn/commit/92fd50ee8cb52968d9c66fbe6d67638c1f838e26"><code>92fd50e</code></a>
Test docs.rs documentation build in CI</li>
<li>See full diff in <a
href="https://github.com/dtolnay/syn/compare/2.0.37...2.0.38">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=syn&package-manager=cargo&previous-version=2.0.37&new-version=2.0.38)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

# Description
This PR introduces two changes:
- the previous `Tracing` trait has been modified to accept contract
address instead of code hash (seems to be way more convenient)
- a new trait `CallInterceptor` that allows intercepting contract calls;
in particular the default implementation for `()` will just proceed in a
standard way (after compilation optimizations, there will be no
footprint of that); however, implementing type might decide to mock
invocation and return `ExecResult` instead

Note: one might try merging `before_call` and `intercept_call`. However,
IMHO this would be bad, since it would mix two completely different
abstractions - tracing without any effects and actual intervention into
execution process.

This will unblock working on mocking contracts utility in drink and
similar tools (https://github.com/Cardinal-Cryptography/drink/issues/33)

# Checklist

- [x] My PR includes a detailed description as outlined in the
"Description" section above
- [ ] My PR follows the [labeling
requirements](https://github.com/paritytech/polkadot-sdk/blob/master/docs/CONTRIBUTING.md#process)
of this project (at minimum one label for `T` required)
- [x] I have made corresponding changes to the documentation (if
applicable)
- [x] I have added tests that prove my fix is effective or that my
feature works (if applicable)

# Description

We are recently trying to upgrade our Substrate version from
`polkadot-v0.9.43` to `polkadot-v1.0.0` and we noticed a critical issue:
all deployed contracts seem to be experiencing a `CodeNotFound` error.
After a thorough investigation, it appears that the root cause of this
issue lies in the mismatch between the storage alias of `CodeInfoOf<T>`
in the migration and its original definition.

This PR corrects the storage alias to align it with its original
definition

I am uncertain about the proper approach for adding tests to this
change. Would the team consider taking over this PR to bring it to
completion?

---------

Co-authored-by: pgherveou <[email protected]>

[//]: # (dependabot-start)
⚠️  **Dependabot is rebasing this PR** ⚠

️ 

Rebasing might not happen immediately, so don't worry if this takes some
time.

Note: if you make any changes to this PR yourself, they will take
precedence over the rebase.

---

[//]: # (dependabot-end)

Bumps the known_good_semver group with 2 updates:
[clap](https://github.com/clap-rs/clap) and
[syn](https://github.com/dtolnay/syn).

Updates `clap` from 4.4.3 to 4.4.4
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/releases">clap's
releases</a>.</em></p>
<blockquote>
<h2>v4.4.4</h2>
<h2>[4.4.4] - 2023-09-18</h2>
<h3>Internal</h3>
<ul>
<li>Update <code>terminal_size</code> to 0.3</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.4.4] - 2023-09-18</h2>
<h3>Internal</h3>
<ul>
<li>Update <code>terminal_size</code> to 0.3</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/e6e539660f36487e3521ab6835ef1381a21785a4"><code>e6e5396</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/acbb60c11389d362e3b2d23a7b2a0a0523bd2fa8"><code>acbb60c</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/f09d521450c50f56153f7246489666c71e3b4739"><code>f09d521</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5129">#5129</a>
from cgwalters/widen-terminal-size</li>
<li><a
href="https://github.com/clap-rs/clap/commit/84f99ff979d58e3fe94716144b1800fd81723ed7"><code>84f99ff</code></a>
chore(builder): Bump terminal_size to 0.3</li>
<li><a
href="https://github.com/clap-rs/clap/commit/7f8df272d90afde89e40de086492e1c9f5749897"><code>7f8df27</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5124">#5124</a>
from devinherron/master</li>
<li><a
href="https://github.com/clap-rs/clap/commit/4dff87386a950d8dfa8e89906e9bf54d180d13de"><code>4dff873</code></a>
fix(doc): Fix typo in 03_04_subcommands.md</li>
<li>See full diff in <a
href="https://github.com/clap-rs/clap/compare/v4.4.3...v4.4.4">compare
view</a></li>
</ul>
</details>
<br />

Updates `syn` from 2.0.36 to 2.0.37
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/syn/releases">syn's
releases</a>.</em></p>
<blockquote>
<h2>2.0.37</h2>
<ul>
<li>Work around incorrect future compatibility warning in rustc
1.74.0-nightly</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/syn/commit/96810880f3acbb63415cf4684ab42c82edc31e2a"><code>9681088</code></a>
Release 2.0.37</li>
<li><a
href="https://github.com/dtolnay/syn/commit/fbe3bc2ddcee4192f95697a953330d031030f5a1"><code>fbe3bc2</code></a>
Work around unknown_lints warning on rustc older than 1.64</li>
<li><a
href="https://github.com/dtolnay/syn/commit/75cf912e061ef5a1d97c003f4988f43d7639f5a8"><code>75cf912</code></a>
Ignore more repr_transparent_external_private_fields</li>
<li><a
href="https://github.com/dtolnay/syn/commit/299c782439823b868de4aea3682b41d03351d978"><code>299c782</code></a>
Ignore false repr_transparent_external_private_fields FCW in generated
code</li>
<li>See full diff in <a
href="https://github.com/dtolnay/syn/compare/2.0.36...2.0.37">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Bumps the known_good_semver group with 1 update:
[syn](https://github.com/dtolnay/syn).

<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/syn/releases">syn's
releases</a>.</em></p>
<blockquote>
<h2>2.0.36</h2>
<ul>
<li>Restore compatibility with
<code>--generate-link-to-definition</code> documentation builds (<a
href="https://redirect.github.com/dtolnay/syn/issues/1514">#1514</a>)</li>
</ul>
<h2>2.0.35</h2>
<ul>
<li>Make rust-analyzer produce preferred brackets for invocations of
<code>Token!</code> macro (<a
href="https://redirect.github.com/dtolnay/syn/issues/1510">#1510</a>, <a
href="https://redirect.github.com/dtolnay/syn/issues/1512">#1512</a>)</li>
</ul>
<h2>2.0.34</h2>
<ul>
<li>Documentation improvements</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/syn/commit/ef6476c76431da488720c8ee3fdfff57a199a848"><code>ef6476c</code></a>
Release 2.0.36</li>
<li><a
href="https://github.com/dtolnay/syn/commit/6ae1a9756a128f18341a4cba56772ee1715a06e2"><code>6ae1a97</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1514">#1514</a>
from dtolnay/pubnotdoc</li>
<li><a
href="https://github.com/dtolnay/syn/commit/7bfef4b2befee954bc002724c8331612fed3d47f"><code>7bfef4b</code></a>
Work around doc breakage in generate-link-to-definition mode</li>
<li><a
href="https://github.com/dtolnay/syn/commit/ce360ff4b1695311dcc569ade1fc9ff1ff6ac4d9"><code>ce360ff</code></a>
Release 2.0.35</li>
<li><a
href="https://github.com/dtolnay/syn/commit/23736bdc48a964286ea032ea5c172574239119ef"><code>23736bd</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1512">#1512</a>
from dtolnay/tokendoc</li>
<li><a
href="https://github.com/dtolnay/syn/commit/6f6b0040d420abfda0b5504dc13b7c76319ebccd"><code>6f6b004</code></a>
Improve docs of Token! macro</li>
<li><a
href="https://github.com/dtolnay/syn/commit/319433e12a0e13d1b549a189ae1ce1d3293a7ea9"><code>319433e</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1510">#1510</a>
from ModProg/patch-3</li>
<li><a
href="https://github.com/dtolnay/syn/commit/975ce0b7c4319166ff0ae5ea839d923410615dae"><code>975ce0b</code></a>
Release 2.0.34</li>
<li><a
href="https://github.com/dtolnay/syn/commit/858e578d1e3aed3d7ac965a59b5044a1ca4eadf2"><code>858e578</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1511">#1511</a>
from dtolnay/notdoc</li>
<li><a
href="https://github.com/dtolnay/syn/commit/1b0d7f807862cb36256848a9f55a81a9aca41976"><code>1b0d7f8</code></a>
Add cfg(not(doc)) to doc(hidden) functions</li>
<li>Additional commits viewable in <a
href="https://github.com/dtolnay/syn/compare/2.0.33...2.0.36">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=syn&package-manager=cargo&previous-version=2.0.33&new-version=2.0.36)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Bumps the known_good_semver group with 2 updates:
[serde_json](https://github.com/serde-rs/json) and
[syn](https://github.com/dtolnay/syn).

Updates `serde_json` from 1.0.106 to 1.0.107
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/json/releases">serde_json's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.107</h2>
<ul>
<li>impl IntoDeserializer for &amp;RawValue (<a
href="https://redirect.github.com/serde-rs/json/issues/1071">#1071</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/json/commit/b6e113f2036c52e994ca805e530ee4ffae791f71"><code>b6e113f</code></a>
Release 1.0.107</li>
<li><a
href="https://github.com/serde-rs/json/commit/00626a0a95b3d4cee8d57709f0acc804c1296716"><code>00626a0</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1073">#1073</a>
from dtolnay/rawvalue</li>
<li><a
href="https://github.com/serde-rs/json/commit/b9d296f87d6081afdd590d5a6006737db961302b"><code>b9d296f</code></a>
IntoDeserializer for &amp;RawValue</li>
<li><a
href="https://github.com/serde-rs/json/commit/4ea34a2566ba82a2e602526d0919d23e88c9e5ef"><code>4ea34a2</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1072">#1072</a>
from dtolnay/rawvalue</li>
<li><a
href="https://github.com/serde-rs/json/commit/fe30766ae5c79bfb670b2de1c5596e6e11e22f8c"><code>fe30766</code></a>
Support deserializing from &amp;RawValue</li>
<li><a
href="https://github.com/serde-rs/json/commit/2c22077f0e2decfda5cdfd5821c5f9547d584b76"><code>2c22077</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1062">#1062</a>
from osiewicz/remove_build_rs</li>
<li><a
href="https://github.com/serde-rs/json/commit/04f7758b6eae935237574b25a1e63cf5e281e19e"><code>04f7758</code></a>
fixup! chore: Remove no_btreemap_get_key_value and
no_btreemap_remove_entry.</li>
<li><a
href="https://github.com/serde-rs/json/commit/83bdc5fd4213d94201a3d9ad0f2943da7eba1dd6"><code>83bdc5f</code></a>
Omit return keyword in <code>remove_entry</code></li>
<li><a
href="https://github.com/serde-rs/json/commit/89a274195680d3ea6a2b442ff633b81ccf60bbe4"><code>89a2741</code></a>
Revert &quot;Remove limb_width32 and limb_width64 features&quot;</li>
<li><a
href="https://github.com/serde-rs/json/commit/16e04ceeddfdfad18fb1ae8530695a318fa9bc02"><code>16e04ce</code></a>
fixup! Remove limb_width32 and limb_width64 features</li>
<li>See full diff in <a
href="https://github.com/serde-rs/json/compare/v1.0.106...v1.0.107">compare
view</a></li>
</ul>
</details>
<br />

Updates `syn` from 2.0.32 to 2.0.33
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/syn/releases">syn's
releases</a>.</em></p>
<blockquote>
<h2>2.0.33</h2>
<ul>
<li>Special handling for the <code>(/*ERROR*/)</code> placeholder that
rustc uses for macros that fail to expand</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/syn/commit/5e3f55e684b7e33424b9f551105463418b196eb4"><code>5e3f55e</code></a>
Release 2.0.33</li>
<li><a
href="https://github.com/dtolnay/syn/commit/3e04809f5218c6d5fb2b09a6c55933e785825c75"><code>3e04809</code></a>
Pull in proc-macro2 error placeholder change</li>
<li><a
href="https://github.com/dtolnay/syn/commit/2cd5608a4c37810bb0947b0c161a20695b3ce487"><code>2cd5608</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1508">#1508</a>
from dtolnay/error</li>
<li><a
href="https://github.com/dtolnay/syn/commit/84cfe09484f6468bc85fb01db11c6a10fcb2d988"><code>84cfe09</code></a>
Fall through to 'Unrecognized literal' error</li>
<li><a
href="https://github.com/dtolnay/syn/commit/a80570c81bf15c9afcf8e2470ab06f60f7a8183d"><code>a80570c</code></a>
Parse rustc's representation of macro expansion error</li>
<li>See full diff in <a
href="https://github.com/dtolnay/syn/compare/2.0.32...2.0.33">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Fixes #116 

Start function wasn't allowed in a contract. Now it is allowed and is
being run.

It was disallowed because it is not used by Rust and supporting it made
the code more complex. However, not running the start function violates
the wasm standard. This makes life harder for some languages (see linked
ticket).

Bumps the known_good_semver group with 2 updates: [serde_json](https://github.com/serde-rs/json) and [syn](https://github.com/dtolnay/syn).


Updates `serde_json` from 1.0.105 to 1.0.106
- [Release notes](https://github.com/serde-rs/json/releases)
- [Commits](https://github.com/serde-rs/json/compare/v1.0.105...v1.0.106)

Updates `syn` from 2.0.31 to 2.0.32
- [Release notes](https://github.com/dtolnay/syn/releases)
- [Commits](https://github.com/dtolnay/syn/compare/2.0.31...2.0.32)

---
updated-dependencies:
- dependency-name: serde_json
  dependency-type: direct:production
  update-type: version-update:semver-patch
  dependency-group: known_good_semver
- dependency-name: syn
  dependency-type: direct:production
  update-type: version-update:semver-patch
  dependency-group: known_good_semver
...

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

* Update runtime.rs

* Fix

* Revert "Update runtime.rs"

This reverts commit 808f026a.

* nit mono-repo fixes

* Add markdown linting

- add linter default rules
- adapt rules to current code
- fix the code for linting to pass
- add CI check

fix #1243

* Fix markdown for Substrate
* Fix tooling install
* Fix workflow
* Add documentation
* Remove trailing spaces
* Update .github/.markdownlint.yaml

Co-authored-by: Oliver Tale-Yazdi <[email protected]>
* Fix mangled markdown/lists
* Fix captalization issues on known words

Bumps the known_good_semver group with 1 update: [syn](https://github.com/dtolnay/syn).

- [Release notes](https://github.com/dtolnay/syn/releases)
- [Commits](https://github.com/dtolnay/syn/compare/2.0.29...2.0.31)

---
updated-dependencies:
- dependency-name: syn
  dependency-type: direct:production
  update-type: version-update:semver-patch
  dependency-group: known_good_semver
...

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

* contracts: Update to wasmi 0.31

* ".git/.scripts/commands/bench/bench.sh" --subcommand=pallet --runtime=dev --target_dir=substrate --pallet=pallet_contracts

---------

Co-authored-by: command-bot <>

* restructure dispatch macro related exports

* moved Dispatchable to lib.rs

* fix .gitignore final newline

* ".git/.scripts/commands/fmt/fmt.sh"

* fix rustdocs

* wip

---------

Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: ordian <[email protected]>

* Add missing Cumulus licenses

* Typo

* Add missing Substrate licenses

* Single job checking the sub-repos in steps

* Remove dates

* Remove dates

* Add missing (C)

* Update FRAME UI tests

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Update more UI tests

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

* Fix build profiles

Closes https://github.com/paritytech/polkadot-sdk/issues/1155

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Manually set version to 1.0.0

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Use workspace repo

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* 'Authors and Edition from workspace

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

Signed-off-by: alvicsam <[email protected]>

* Update Debug trait

* Rename

* tweak

* fmt

* Better namings

* rm unsafe-debug

* rework doc

* nit

* fix comment

* clippy

* update naming

* Rename file

* fmt fixes

* rename

* Move tracing behind umbrella Debugging trait

* fix

* fix comment

* reorder imports

* comment

* update doc

* add missing doc

* add missing doc

* Update Debugging -> Debugger

* Update bin/node/runtime/Cargo.toml

* CI: Add feature sorting check

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Sort all features

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add some mistakes

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Revert "Add some mistakes"

This reverts commit b2b1099f979f6decb22d09b46689c1554bb72e81.

* CI job naming

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add oneliner formatting

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Explain tool

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Use latest version

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Better erorr message

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Format after master merge

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Use --check option

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Messed up the merge commit...

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* make reexports private

* make reexports private 2

* make reexports private for runtime-benchmarking

* make reexports private for try-runtime

* fix for try-runtime

* make reexports private for tests

* fmt

* make reexports private for tests

* make reexports private for experimental

* fix beefy

* fix ui test

* fix ui test

* fix benches

* ".git/.scripts/commands/fmt/fmt.sh"

* fix contracts use

* wip

* wip

* do not reexport sp_api::metadata_ir

* fix CI checks

* fix support tests

* ".git/.scripts/commands/fmt/fmt.sh"

* Update frame/support/src/lib.rs

Co-authored-by: Bastian Köcher <[email protected]>

* import codec directly

* fmt

* fix node-cli tests

---------

Co-authored-by: command-bot <>
Co-authored-by: Bastian Köcher <[email protected]>

* Expose environment types for offchain tooling

* Use EnvironmentType wrapper

* Add type impl to test config

---------

Co-authored-by: parity-processbot <>

* contracts: refactor currency to use fungible traits

* contracts: refactor currency to use fungible traits

* contracts: add minor improvements

* contracts: max holds config set

* contracts: fix some typos

* contracts: map token errors

* fix typo

* contracts: add 0 balance transfer to test

* contracts: not transfer if value is zero

* contracts: [WIP] add StorageDepositHold

* contracts: add storage deposit held event

* contracts: clean up some code and comments

* contracts: add deposit storage released event

* contracts: update comment

* contracts: update slash cannot kill account test

* contracts: fix tests

* contracts: add some comments to the slashing test

* contracts: add some comments to the slashing test

* contracts: remove references to Currency

* contracts: do not transfer if from equals to

* bound BalanceOf<T>

* added FixedPointOperand to Balance trait

* move migrate sequence to config

* remove commented out code

* Update frame/contracts/src/lib.rs

Co-authored-by: PG Herveou <[email protected]>

* remove Migrations generic

* make runtime use noop migrations

* restrict is_upgrade_supported

* undo is_upgrade_supported change

* Update bin/node/runtime/src/lib.rs

Co-authored-by: PG Herveou <[email protected]>

* add rust doc example for `Migrations`

* feature gate NoopMigration

* fix example code

* improve example

* wip

* remove FixedPointOperand from trait

* trait bound BalanceOf

* more trait bound BalanceOf

* update to use RuntimeHoldReason

* replace Fungible for Currency

* update runtime

* WIP

* make v10 benchmark generic over currency

* solve merge conflicts

* make v12 migration benchmarking generic over DepositPerItem and DepositPerByte

* give some format

* fix tests and old migrations

* add migration v13 placholder

* wip

* wip

* add benchmarking

* add weights

* wip

* [pallet_collective] Enforce prime is a valid member of collective in set_members extrinsic (#14354)

* Updated set_members extrinsic to enforce prime is valid member of collective

* Added additional tests for set_members extrinsic

* applied the code review suggestions

* update to docify 0.2.0 / crate-relative embed paths (#14570)

* Fix Society v2 migration (#14421)

* fix society v2 migration

* Update frame/society/src/migrations.rs

* Update frame/society/src/migrations.rs

Co-authored-by: Bastian Köcher <[email protected]>

* Update frame/society/src/migrations.rs

Co-authored-by: Bastian Köcher <[email protected]>

* update for versioned upgrade

* fix society v2 migration

* remove references to members being sorted from commnets

* fix type

* fix can_migrate check

* add sanity log

* fix sanity check

* kick ci

* kick ci

* run tests with --experimental flag

* versioned migration cleanup

* revert pipeline change

* use defensive!

* semicolons

* defensive and doc comment

* address pr comment

* feature gate the versioned migration

* defensive_unwrap_or

* fix test

* fix doc comment

* change defensive to a log warning

* remove can_migrate anti-pattern

* Update frame/society/Cargo.toml

Co-authored-by: Bastian Köcher <[email protected]>

* add experimental feature warning to doc comment

* update doc comment

* bump ci

* kick ci

* kick ci

* kick ci

---------

Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

* Moves `Block` to `frame_system` instead of `construct_runtime` and removes `Header` and `BlockNumber` (#14437)

* Initial setup

* Adds node block

* Uses UncheckedExtrinsic and removes Where section

* Updates frame_system to use Block

* Adds deprecation warning

* Fixes pallet-timestamp

* Removes Header and BlockNumber

* Addresses review comments

* Addresses review comments

* Adds comment about compiler bug

* Removes where clause

* Refactors code

* Fixes errors in cargo check

* Fixes errors in cargo check

* Fixes warnings in cargo check

* Formatting

* Fixes construct_runtime tests

* Uses import instead of full path for BlockNumber

* Uses import instead of full path for Header

* Formatting

* Fixes construct_runtime tests

* Fixes imports in benchmarks

* Formatting

* Fixes construct_runtime tests

* Formatting

* Minor updates

* Fixes construct_runtime ui tests

* Fixes construct_runtime ui tests with 1.70

* Fixes docs

* Fixes docs

* Adds u128 mock block type

* Fixes split example

* fixes for cumulus

* ".git/.scripts/commands/fmt/fmt.sh"

* Updates new tests

* Fixes fully-qualified path in few places

* Formatting

* Update frame/examples/default-config/src/lib.rs

Co-authored-by: Juan <[email protected]>

* Update frame/support/procedural/src/construct_runtime/mod.rs

Co-authored-by: Juan <[email protected]>

* ".git/.scripts/commands/fmt/fmt.sh"

* Addresses some review comments

* Fixes build

* ".git/.scripts/commands/fmt/fmt.sh"

* Update frame/democracy/src/lib.rs

Co-authored-by: Oliver Tale-Yazdi <[email protected]>

* Update frame/democracy/src/lib.rs

Co-authored-by: Oliver Tale-Yazdi <[email protected]>

* Update frame/support/procedural/src/construct_runtime/mod.rs

Co-authored-by: Oliver Tale-Yazdi <[email protected]>

* Update frame/support/procedural/src/construct_runtime/mod.rs

Co-authored-by: Oliver Tale-Yazdi <[email protected]>

* Addresses review comments

* Updates trait bounds

* Minor fix

* ".git/.scripts/commands/fmt/fmt.sh"

* Removes unnecessary bound

* ".git/.scripts/commands/fmt/fmt.sh"

* Updates test

* Fixes build

* Adds a bound for header

* ".git/.scripts/commands/fmt/fmt.sh"

* Removes where block

* Minor fix

* Minor fix

* Fixes tests

* ".git/.scripts/commands/update-ui/update-ui.sh" 1.70

* Updates test

* Update primitives/runtime/src/traits.rs

Co-authored-by: Bastian Köcher <[email protected]>

* Update primitives/runtime/src/traits.rs

Co-authored-by: Bastian Köcher <[email protected]>

* Updates doc

* Updates doc

---------

Co-authored-by: command-bot <>
Co-authored-by: Juan <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

* Refactor the asset-conversion-tx-payment pallet (#14558)

* Code refactoring

* Fix imports

* Typo

* Update frame/asset-conversion/src/types.rs

Co-authored-by: joe petrowski <[email protected]>

* Sync docs

---------

Co-authored-by: parity-processbot <>
Co-authored-by: joe petrowski <[email protected]>

* wip

* wip

* wip

* improve try-runtime imports

* remove deposit account

* wip

* wip

* fix benchmark test

* improved rustdocs

* improved rustdocs

* remove log

* ignore variable

* reduce caller funding

* wip

* fix tests

* fix tests

* move v13 out

* add v14

* update v13 migration

* v13 migration

* benchmark v13_migration

* fix broken compilation

* ".git/.scripts/commands/bench/bench.sh" --subcommand=pallet --runtime=dev --target_dir=substrate --pallet=pallet_contracts

* remove all the `where BalanceOf`

* add Balance to Config

* improve docs

* add new deposit storage error

* remove todo message

* wip

* rename migration v13 pre rebase

* fix tests

* add missing migration;

* bump storage version

* apply review suggestions

* improved comment

* remove unnecessary code

* simplify migrations

* mock balance

* mock more for benchmarks

* make room for rebaes

* make room for rebase

* fix benchmarking tests

* fix benchmarking tests with caller

* improve cargo toml

* solve nit

* Update frame/contracts/src/lib.rs

Co-authored-by: Alexander Theißen <[email protected]>

* Update frame/contracts/src/exec.rs

Co-authored-by: Alexander Theißen <[email protected]>

* Update frame/contracts/src/exec.rs

Co-authored-by: Alexander Theißen <[email protected]>

* Update frame/contracts/src/storage/meter.rs

Co-authored-by: Alexander Theißen <[email protected]>

* review improvements

* remove extra events

* update cargo

* undo update cargo

* review updates

* wip

* wip

* fix test

* remove type Balance

* add extra fields to events

* fix zepter ci

* fix tests

* remove commented out code

* remove deposit_account from benchmarking

* update v15 migration

* wip

* remove deposit account from codebase

* add contract info to v15

* make try-runtime fixes

* fix wrong v14 logs

* add extra post upgrade steps

* remove old comments

* wip

* fix delegate deposit test

* ".git/.scripts/commands/bench/bench.sh" --subcommand=pallet --runtime=dev --target_dir=substrate --pallet=pallet_contracts

* wip

* wip

* wip

* implement review updates

* ".git/.scripts/commands/bench/bench.sh" --subcommand=pallet --runtime=dev --target_dir=substrate --pallet=pallet_contracts

* fix documentation

* fix consumers/providers

* fix consumers/providers

* do not check consumers in migration

* review comments addressed

* update fully qualified System

* wip

* wip

* Transfer to beneficiary after `transfer_on_hold` (#14767)

* transfer to beneficiary after transfer_on_hold

* wip

* add consumer comment

* review updates

* fix typo

* make clippy happy

* refactor `Terminated`

* rename ContractStatus to ContractState

* rename status to state

* replace Contribution::Alive to ContractState::Alive

* defer storage deposit charge

* ".git/.scripts/commands/fmt/fmt.sh"

* remove unused imports

* Update frame/contracts/src/migration/v15.rs

Co-authored-by: Sasha Gryaznov <[email protected]>

* Update frame/contracts/src/storage/meter.rs

Co-authored-by: Sasha Gryaznov <[email protected]>

---------

Co-authored-by: PG Herveou <[email protected]>
Co-authored-by: Toufeeq Pasha <[email protected]>
Co-authored-by: Sam Johnson <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: gupnik <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Jegor Sidorenko <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Alexander Theißen <[email protected]>
Co-authored-by: Sasha Gryaznov <[email protected]>

* Contracts: expose charge_storage to chain_extension

* fix typo

* export Diff

* Types in the pallet

* Primitives

* Provide basic breakpoints

* Rename to Observer

* Rename feature. Single trait. Borrow-checker

* : frame_system::Config

* Confused type name

* Minor bugs

* pub trait

* No unnecessary cloning

* Make node compile with all features

* Move everything debug-related to a single module

* Add docs and implementation for ()

* fmt

* Make it feature-gated or for tests

* Prepare testing kit

* Testcase

* Fmt

* Use feature in dev-deps

* ?

* feature propagation

* AAAA

* lol, that doesn't make much sense to me

* Turn on

* clippy

* Remove self dep

* fmt, feature-gating test

* Noop to trigger CI

* idk

* add feature to pipeline

* Corrupt test to see if it is actually being run

* Revert change

* Doc for conf type

* Review

* Imports

* ...

* Remove debug for kitchen-sink

* Move test

* Fix imports

* I must have already tried this one...