# Motivation (+testing)

### Enable easy `ForeignAssets` transfers using `pallet-xcm` 

We had just previously added capabilities to teleport fees during
reserve-based transfers, but what about reserve-transferring fees when
needing to teleport some non-fee asset?

This PR aligns everything under either explicit reserve-transfer,
explicit teleport, or this new flexible `transfer_assets()` which can
mix and match as needed with fewer artificial constraints imposed to the
user.

This will enable, for example, a (non-system) parachain to teleport
their `ForeignAssets` assets to AssetHub while using DOT to pay fees.
(the assets are teleported - as foreign assets should from their owner
chain - while DOT used for fees can only be reserve-based transferred
between said parachain and AssetHub).

Added `xcm-emulator` tests for this scenario ^.

# Description

Reverts `(limited_)reserve_transfer_assets` to only allow reserve-based
transfers for all `assets` including fees.

Similarly `(limited_)teleport_assets` only allows teleports for all
`assets` including fees.
    
For complex combinations of asset transfers where assets and fees may
have different reserves or different reserve/teleport trust
configurations, users can use the newly added `transfer_assets()`
extrinsic which is more flexible in allowing more complex scenarios.

`assets` (excluding `fees`) must have same reserve location or otherwise
be teleportable to `dest`.
No limitations imposed on `fees`.

- for local reserve: transfer assets to sovereign account of destination
chain and forward a notification XCM to `dest` to mint and deposit
reserve-based assets to `beneficiary`.
- for destination reserve: burn local assets and forward a notification
to `dest` chain to withdraw the reserve assets from this chain's
sovereign account and deposit them to `beneficiary`.
- for remote reserve: burn local assets, forward XCM to reserve chain to
move reserves from this chain's SA to `dest` chain's SA, and forward
another XCM to `dest` to mint and deposit reserve-based assets to
`beneficiary`.
- for teleports: burn local assets and forward XCM to `dest` chain to
mint/teleport assets and deposit them to `beneficiary`.

## Review notes

Only around 500 lines are prod code (see `pallet_xcm/src/lib.rs`), the
rest of the PR is new tests and improving existing tests.

---------

Co-authored-by: command-bot <>

Bumps [parity-db](https://github.com/paritytech/parity-db) from 0.4.10
to 0.4.12.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/paritytech/parity-db/blob/master/CHANGELOG.md">parity-db's
changelog</a>.</em></p>
<blockquote>
<h2>[v0.4.12] - 2023-10-12</h2>
<ul>
<li>CI for windows and macos. Also fixes access denied error on windows
<a
href="https://redirect.github.com/paritytech/parity-db/pull/222"><code>[#222](https://github.com/paritytech/parity-db/issues/222)</code></a></li>
<li>Force alignment for all chunk buffers <a
href="https://redirect.github.com/paritytech/parity-db/pull/225"><code>[#225](https://github.com/paritytech/parity-db/issues/225)</code></a></li>
</ul>
<h2>[v0.4.11] - 2023-09-13</h2>
<ul>
<li>Make <code>madvise_random</code> compatible with non-Unix OS <a
href="https://redirect.github.com/paritytech/parity-db/pull/221"><code>[#221](https://github.com/paritytech/parity-db/issues/221)</code></a></li>
<li>Explicit <code>funlock</code> <a
href="https://redirect.github.com/paritytech/parity-db/pull/218"><code>[#218](https://github.com/paritytech/parity-db/issues/218)</code></a></li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/paritytech/parity-db/commit/47b6c98455f8875b6eeb980d35a2be62f64d074f"><code>47b6c98</code></a>
Bump version</li>
<li><a
href="https://github.com/paritytech/parity-db/commit/ec686930169b84d21336bed6d6f05c787a17d61f"><code>ec68693</code></a>
Force alignment for all chunk buffers (<a
href="https://redirect.github.com/paritytech/parity-db/issues/225">#225</a>)</li>
<li><a
href="https://github.com/paritytech/parity-db/commit/4ac2aca38c6984f8a48080875590a687041a39d8"><code>4ac2aca</code></a>
CI for windows and macos (<a
href="https://redirect.github.com/paritytech/parity-db/issues/222">#222</a>)</li>
<li><a
href="https://github.com/paritytech/parity-db/commit/2c52598b9c53519b61cb078c81ea427b287558d7"><code>2c52598</code></a>
Bump version</li>
<li><a
href="https://github.com/paritytech/parity-db/commit/f537334507bb357330753398868f040b8e9ff9d3"><code>f537334</code></a>
Make <code>madvise_random</code> compatible with non-Unix OS (<a
href="https://redirect.github.com/paritytech/parity-db/issues/221">#221</a>)</li>
<li><a
href="https://github.com/paritytech/parity-db/commit/8eae5d3e5e2a304052f7cca75eb249080f6a7790"><code>8eae5d3</code></a>
Explicit funlock (<a
href="https://redirect.github.com/paritytech/parity-db/issues/218">#218</a>)</li>
<li>See full diff in <a
href="https://github.com/paritytech/parity-db/compare/v0.4.10...v0.4.12">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=parity-db&package-manager=cargo&previous-version=0.4.10&new-version=0.4.12)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores

)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

This will make more sense after
https://github.com/paritytech/polkadot-sdk/pull/2524 since the
schnorrkel type for VRF outputs is also renamed in the latest version.
Can be reviewed independently though.

Can be merged after https://github.com/paritytech/polkadot-sdk/pull/1577
so that there is less pain for @davxy

.

---------

Co-authored-by: Bastian Köcher <[email protected]>

Co-authored-by: Liam Aharon <[email protected]>

Bumps [tracing-core](https://github.com/tokio-rs/tracing) from 0.1.31 to
0.1.32.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/tokio-rs/tracing/releases">tracing-core's
releases</a>.</em></p>
<blockquote>
<h2>tracing-core 0.1.32</h2>
<h3>Documented</h3>
<ul>
<li>Fix typo in <code>field</code> docs (<a
href="https://redirect.github.com/tokio-rs/tracing/issues/2611">#2611</a>)</li>
<li>Remove duplicate wording (<a
href="https://redirect.github.com/tokio-rs/tracing/issues/2674">#2674</a>)</li>
</ul>
<h3>Changed</h3>
<ul>
<li>Allow <code>ValueSet</code>s of any length (<a
href="https://redirect.github.com/tokio-rs/tracing/issues/2508">#2508</a>)</li>
</ul>
<p><a
href="https://redirect.github.com/tokio-rs/tracing/issues/2611">#2611</a>:
<a
href="https://redirect.github.com/tokio-rs/tracing/pull/2611">tokio-rs/tracing#2611</a>
<a
href="https://redirect.github.com/tokio-rs/tracing/issues/2674">#2674</a>:
<a
href="https://redirect.github.com/tokio-rs/tracing/pull/2674">tokio-rs/tracing#2674</a>
<a
href="https://redirect.github.com/tokio-rs/tracing/issues/2508">#2508</a>:
<a
href="https://redirect.github.com/tokio-rs/tracing/pull/2508">tokio-rs/tracing#2508</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/tokio-rs/tracing/commit/c4b2a56937dd40aaa2e2991636eca6748353201f"><code>c4b2a56</code></a>
chore: prepare tracing-core 0.1.32 (<a
href="https://redirect.github.com/tokio-rs/tracing/issues/2754">#2754</a>)</li>
<li><a
href="https://github.com/tokio-rs/tracing/commit/2502f19d934b092fc01bb7493eacbb16b4038bf3"><code>2502f19</code></a>
chore: prepare tracing-attributes 0.1.27 (<a
href="https://redirect.github.com/tokio-rs/tracing/issues/2756">#2756</a>)</li>
<li><a
href="https://github.com/tokio-rs/tracing/commit/90487620d8fd4b0a44e6a0385bda3643bf6f19a2"><code>9048762</code></a>
Revert &quot;log: update to env_logger 0.10 to fix GHSA-g98v-hv3f-hcfr
(<a
href="https://redirect.github.com/tokio-rs/tracing/issues/2740">#2740</a>)&quot;
(#...</li>
<li><a
href="https://github.com/tokio-rs/tracing/commit/6ba5af2ce2a814fea521d2d0a5ea1e88d7b6011e"><code>6ba5af2</code></a>
docs: remove mention of <code>Registration</code> on v0.1.x (<a
href="https://redirect.github.com/tokio-rs/tracing/issues/2753">#2753</a>)</li>
<li><a
href="https://github.com/tokio-rs/tracing/commit/11aac9a07c4aac35b12ea82d8a5b1cb00a118928"><code>11aac9a</code></a>
log: deprecate <code>env_logger</code> in favor of
<code>tracing_subscriber::fmt::Subscriber</code>...</li>
<li><a
href="https://github.com/tokio-rs/tracing/commit/2f27752a9912f03ed64e2b29e1ea06ebb4b09e83"><code>2f27752</code></a>
chore: remove <code>env_logger</code> from <code>hyper</code>
example</li>
<li><a
href="https://github.com/tokio-rs/tracing/commit/f96846d78a3f240a2c81636a7d6921e5d74ac79f"><code>f96846d</code></a>
attributes: fix typo &quot;overriden&quot; =&gt; &quot;overridden&quot;
(<a
href="https://redirect.github.com/tokio-rs/tracing/issues/2719">#2719</a>)</li>
<li><a
href="https://github.com/tokio-rs/tracing/commit/71b5b2c5792ee6cd4e98112a90f9fcd19dd1ddc0"><code>71b5b2c</code></a>
subscriber: make <code>format::Writer::new()</code> public (<a
href="https://redirect.github.com/tokio-rs/tracing/issues/2680">#2680</a>)</li>
<li><a
href="https://github.com/tokio-rs/tracing/commit/f8c000202a30f8b9814b21a1e949ab35aeca5954"><code>f8c0002</code></a>
attributes: fix clippy warning in attributes tests (<a
href="https://redirect.github.com/tokio-rs/tracing/issues/2742">#2742</a>)</li>
<li><a
href="https://github.com/tokio-rs/tracing/commit/60b2dc34662648b91d69b2fa51d18d3677ddbce7"><code>60b2dc3</code></a>
journald: fix clippy <code>unwrap_or_default</code> warning (<a
href="https://redirect.github.com/tokio-rs/tracing/issues/2742">#2742</a>)</li>
<li>Additional commits viewable in <a
href="https://github.com/tokio-rs/tracing/compare/tracing-core-0.1.31...tracing-core-0.1.32">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=tracing-core&package-manager=cargo&previous-version=0.1.31&new-version=0.1.32)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores

)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

---------

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: command-bot <>
Co-authored-by: Liam Aharon <[email protected]>

# Description

just ensures

```sh
cargo check --package staging-xcm  --no-default-features  --target wasm32-unknown-unknown --features=std
```

work (for CosmWasm)

# Checklist

- [x] My PR includes a detailed description as outlined in the
"Description" section above
- [ ] My PR follows the [labeling requirements](CONTRIBUTING.md#Process)
of this project (at minimum one label for `T`
  required)
- [x] I have made corresponding changes to the documentation (if
applicable)
- [ ] I have added tests that prove my fix is effective or that my
feature works (if applicable)

---------

Co-authored-by: Bastian Köcher <[email protected]>

Several PRs started introducing `prdoc` files before the schema was
final.
This PR fixes those former prdoc to ensure that pass the check and
comply with the current prdoc schema.

---------

Co-authored-by: command-bot <>

During the monorepo merge, the Github workflows for subtrate, polkadot
and cumulus were imported in various sub folders.
This PR merges and fixes some of those workflows and brings them back to
the root to make them available again.

---------

Co-authored-by: Egor_P <[email protected]>

Co-authored-by: Javier Viola <[email protected]>

This PR is a continuation of
https://github.com/paritytech/polkadot-sdk/pull/2102 and part of an
initiative started here https://hackmd.io/@romanp/rJ318ZCEp
What has been done:
- The content under `docs/*` (with the exception of `docs/mermaid`) has
been moved to `docs/contributor/`
- Developer Hub has been renamed to Polkadot SDK Docs, and the crate has
been renamed from `developer-hub` to `polkadot-sdk-docs`
- The content under `developer-hub/*` has been moved to `docs/sdk`

---
Original PR https://github.com/paritytech/polkadot-sdk/pull/2565

, it has
been close due to too many rebase conflicts

---------

Co-authored-by: Serban Iorga <[email protected]>
Co-authored-by: Chevdor <[email protected]>
Co-authored-by: Egor_P <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

Smoldot sometimes stops reporting finalized blocks to us. Since we are
recovering from the relay chain with a huge delay on full nodes, we can
not rely on import notifications to set the best block. Because
sometimes we also do not receive finality notifications, the height
check in zombienet fails.

Proper solution is to update smoldot, there have been some changes since
the version we use. But upgrade is blocked by version conflict which
will be resolved with
https://github.com/paritytech/polkadot-sdk/pull/1631.

Improved max message size logic and added test for it

---------

Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: command-bot <>

Bumps [multihash](https://github.com/multiformats/rust-multihash) from
0.17.0 to 0.18.1.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/multiformats/rust-multihash/blob/master/CHANGELOG.md">multihash's
changelog</a>.</em></p>
<blockquote>
<h2><a
href="https://github.com/multiformats/rust-multihash/compare/v0.18.0...v0.18.1">v0.18.1</a>
(2023-04-14)</h2>
<h3>Bug Fixes</h3>
<ul>
<li>don't panic on non minimal varints (<a
href="https://redirect.github.com/multiformats/rust-multihash/issues/293">#293</a>)
(<a
href="https://github.com/multiformats/rust-multihash/commit/c3445fc5041b0fc573945321ebd4b0cdffe0daa5">c3445fc</a>),
closes <a
href="https://redirect.github.com/multiformats/rust-multihash/issues/282">#282</a></li>
</ul>
<h2><a
href="https://github.com/multiformats/rust-multihash/compare/v0.17.0...v0.18.0">0.18.0</a>
(2022-12-06)</h2>
<h3>⚠ BREAKING CHANGES</h3>
<ul>
<li>
<p>update to Rust edition 2021</p>
</li>
<li>
<p><code>Multihash::write()</code> returns bytes written</p>
<p>Prior to this change it returned an empty tuple <code>()</code>, now
it returns
the bytes written.</p>
</li>
</ul>
<h3>Features</h3>
<ul>
<li>add <code>encoded_len</code> and bytes written (<a
href="https://redirect.github.com/multiformats/rust-multihash/issues/252">#252</a>)
(<a
href="https://github.com/multiformats/rust-multihash/commit/b3cc43ecb6f9c59da774b094853d6542430d55ad">b3cc43e</a>)</li>
</ul>
<h3>Bug Fixes</h3>
<ul>
<li>remove Nix support (<a
href="https://redirect.github.com/multiformats/rust-multihash/issues/254">#254</a>)
(<a
href="https://github.com/multiformats/rust-multihash/commit/ebf57ddb82be2d2fd0a2f00666b0f888d4c78e1b">ebf57dd</a>),
closes <a
href="https://redirect.github.com/multiformats/rust-multihash/issues/247">#247</a></li>
<li>update to Rust edition 2021 (<a
href="https://redirect.github.com/multiformats/rust-multihash/issues/255">#255</a>)
(<a
href="https://github.com/multiformats/rust-multihash/commit/da53376e0d9cf2d82d6c0d10590a77991cb3a6b6">da53376</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/multiformats/rust-multihash/commit/02c5c664a7e59f6ecf84e81276c4eb8bb65693d5"><code>02c5c66</code></a>
chore: Release multihash version 0.18.1</li>
<li><a
href="https://github.com/multiformats/rust-multihash/commit/d08a25d8d624f4a3afcad0ecf724f7d9a20b5e28"><code>d08a25d</code></a>
chore: add 0.18.1 to changelog</li>
<li><a
href="https://github.com/multiformats/rust-multihash/commit/c3445fc5041b0fc573945321ebd4b0cdffe0daa5"><code>c3445fc</code></a>
fix: don't panic on non minimal varints (<a
href="https://redirect.github.com/multiformats/rust-multihash/issues/293">#293</a>)</li>
<li><a
href="https://github.com/multiformats/rust-multihash/commit/f015e0a2e4f55742eca95ddbb5561d8c703d551f"><code>f015e0a</code></a>
chore: Release</li>
<li><a
href="https://github.com/multiformats/rust-multihash/commit/8651573323c4191931e12cf9f1ed5feabf5a4989"><code>8651573</code></a>
Two small cleanups before the release (<a
href="https://redirect.github.com/multiformats/rust-multihash/issues/257">#257</a>)</li>
<li><a
href="https://github.com/multiformats/rust-multihash/commit/048d2350b3fa3ac1fec59bbf8cd8063e00b13593"><code>048d235</code></a>
chore: add v0.18 changelog (<a
href="https://redirect.github.com/multiformats/rust-multihash/issues/253">#253</a>)</li>
<li><a
href="https://github.com/multiformats/rust-multihash/commit/da53376e0d9cf2d82d6c0d10590a77991cb3a6b6"><code>da53376</code></a>
fix: update to Rust edition 2021 (<a
href="https://redirect.github.com/multiformats/rust-multihash/issues/255">#255</a>)</li>
<li><a
href="https://github.com/multiformats/rust-multihash/commit/ebf57ddb82be2d2fd0a2f00666b0f888d4c78e1b"><code>ebf57dd</code></a>
fix: remove Nix support (<a
href="https://redirect.github.com/multiformats/rust-multihash/issues/254">#254</a>)</li>
<li><a
href="https://github.com/multiformats/rust-multihash/commit/b3cc43ecb6f9c59da774b094853d6542430d55ad"><code>b3cc43e</code></a>
feat: add <code>encoded_len</code> and bytes written (<a
href="https://redirect.github.com/multiformats/rust-multihash/issues/252">#252</a>)</li>
<li>See full diff in <a
href="https://github.com/multiformats/rust-multihash/compare/v0.17.0...v0.18.1">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=multihash&package-manager=cargo&previous-version=0.17.0&new-version=0.18.1)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores

)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

---------

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Sebastian Kunert <[email protected]>

This ensures that we cleanup the state of `who` in `remove_member`.

---------

Co-authored-by: Liam Aharon <[email protected]>

This PR adds cargo caching feature with custom ['forklift'
tool](https://gitlab.parity.io/parity/infrastructure/ci_cd/forklift/forklift)
Forklift acts as RUSTC_WRAPPER, intercepts rustc calls and stores
produced artifacts in S3 bucket (see [forklift
readme](https://gitlab.parity.io/parity/infrastructure/ci_cd/forklift/forklift/-/blob/main/README.MD?ref_type=heads)
for detailed description)

All settings are made in [`.forklift` job's
before_script](https://github.com/paritytech/polkadot-sdk/blob/es/forklift-test/.gitlab-ci.yml#L119)
and affect all jobs that extend `.docker-env` job

To disable feature set `FORKLIFT_BYPASS` variable to true in [project
settings in
gitlab](https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/settings/ci_cd)

The build script was assuming that `rustup` is installed, which breaks
the build on systems that do not use `rustup`. This pull request just
fixes it by not panicking on the call to `rustup`.

## Overview

This PR brings in the new version of prdoc v0.0.6 and allows:
- local schema
- local config
- local template

It also fixes the existing prdoc files to match the new schema.

## todo

- [x] add a brief doc/tldr to help contributors get started
- [x] test CI
- [x] finalize schema
- [x] publish the next `prdoc` cli version (v0.0.7 or above)

---------

Co-authored-by: Egor_P <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

Removes obsolete fields from the `QueueConfigData` structure. For the
remaining fields, if they use the old defaults, we replace them with the
new defaults.

Resolves: https://github.com/paritytech/polkadot-sdk/issues/1795

Step in https://github.com/paritytech/polkadot-sdk/issues/171

This PR fixes a bug in `derive_impl` causing `#[inject_runtime_type]`
attribute to be parsed incorrectly when docs are added.

# Description

Removed instruction to call init.sh when buidling from source from the
polkadot readme.

Serialized length is now statically computed depending on the domain
size.

Opens the primitive to more generic usages not related to Sassafras
expectations

Address one point of
https://github.com/paritytech/polkadot-sdk/issues/2364

fixes: `taplo format check`

Bumps the known_good_semver group with 1 update:
[syn](https://github.com/dtolnay/syn).

Updates `syn` from 2.0.38 to 2.0.39
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/syn/releases">syn's
releases</a>.</em></p>
<blockquote>
<h2>2.0.39</h2>
<ul>
<li>Fix parsing of return expression in match guards (<a
href="https://redirect.github.com/dtolnay/syn/issues/1528">#1528</a>)</li>
<li>Improve error message on labeled loop as value expression for break
(<a
href="https://redirect.github.com/dtolnay/syn/issues/1531">#1531</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/syn/commit/924217c1734c085ee6cdb5e198d36d610c234313"><code>924217c</code></a>
Release 2.0.39</li>
<li><a
href="https://github.com/dtolnay/syn/commit/95aeeb559866368d8b910d388c8e04b96083666a"><code>95aeeb5</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1531">#1531</a>
from dtolnay/breaklabel</li>
<li><a
href="https://github.com/dtolnay/syn/commit/b88f86fae5c1ac284179181bf7a34549e6d96d7c"><code>b88f86f</code></a>
Ignore single_element_loop clippy lint in test</li>
<li><a
href="https://github.com/dtolnay/syn/commit/a876185366557cb0e0e175c3be48721c8cc0d8e6"><code>a876185</code></a>
Improve error on break followed by labeled loop</li>
<li><a
href="https://github.com/dtolnay/syn/commit/32ab9794d6b75248c1946ae18baab12a46137eb0"><code>32ab979</code></a>
Add test of ambiguous label parsing in break</li>
<li><a
href="https://github.com/dtolnay/syn/commit/6f658f88a213e25b7ac7ec2dc77c537de679b745"><code>6f658f8</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1530">#1530</a>
from dtolnay/canbeginexpr</li>
<li><a
href="https://github.com/dtolnay/syn/commit/20497e1a555812cfe05769b4d8c117c4e0e4edbd"><code>20497e1</code></a>
More precise decision to parse expression after return keyword</li>
<li><a
href="https://github.com/dtolnay/syn/commit/c6a651aa12447d50c22db3189ef38cff90fc267b"><code>c6a651a</code></a>
Update name of ExprReturn parse function to match variant name</li>
<li><a
href="https://github.com/dtolnay/syn/commit/c2745901009f7d65e7b708cd80031642038f765e"><code>c274590</code></a>
Indicate that peek argument refers to syn::Ident</li>
<li><a
href="https://github.com/dtolnay/syn/commit/3e67cb0c660fc906770d212465652bfeb7a75727"><code>3e67cb0</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1529">#1529</a>
from dtolnay/up</li>
<li>Additional commits viewable in <a
href="https://github.com/dtolnay/syn/compare/2.0.38...2.0.39">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=syn&package-manager=cargo&previous-version=2.0.38&new-version=2.0.39)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores

)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

This PR introduces the pallet for Sassafras consensus.

## Non Goals

The pallet delivers only the bare-bones and doesn't deliver support for
auxiliary functionalities such as equivocation report and support for
epoch change via session pallet.

These functionalities were drafted in the [main
PR](https://github.com/paritytech/polkadot-sdk/pull/1336), but IMO is
better to introduce this auxiliary stuff in a follow up PR and after
client code.

## Potential follow ups

https://github.com/paritytech/polkadot-sdk/issues/2364



---------

Co-authored-by: Sebastian Kunert <[email protected]>
Co-authored-by: Koute <[email protected]>
Co-authored-by: Michal Kucharczyk <[email protected]>
Co-authored-by: André Silva <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

Bumps [proc-macro-crate](https://github.com/bkchr/proc-macro-crate) from
1.3.1 to 2.0.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/bkchr/proc-macro-crate/releases">proc-macro-crate's
releases</a>.</em></p>
<blockquote>
<h2>v2.0.0</h2>
<h2>What's Changed</h2>
<ul>
<li>Release 2.0.0 by <a
href="https://github.com/bkchr"><code>@​bkchr</code></a> in <a
href="https://redirect.github.com/bkchr/proc-macro-crate/pull/39">bkchr/proc-macro-crate#39</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/bkchr/proc-macro-crate/compare/v1.3.1...v2.0.0">https://github.com/bkchr/proc-macro-crate/compare/v1.3.1...v2.0.0</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/bkchr/proc-macro-crate/commit/cc100ed2bc1ac9bb81812fd435a43e2ef023f355"><code>cc100ed</code></a>
Merge pull request <a
href="https://redirect.github.com/bkchr/proc-macro-crate/issues/39">#39</a>
from bkchr/bkchr-2.0.0</li>
<li><a
href="https://github.com/bkchr/proc-macro-crate/commit/39a7c1844fc4d73ef397a7e8d9419f1f3381aa44"><code>39a7c18</code></a>
Release 2.0.0</li>
<li>See full diff in <a
href="https://github.com/bkchr/proc-macro-crate/compare/v1.3.1...v2.0.0">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=proc-macro-crate&package-manager=cargo&previous-version=1.3.1&new-version=2.0.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores

)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

`wasm-instrument` and `rand` are optional and only used in benchmarking,
so should not be pulled in by default as part of the `std` feature.

Using taplo, fixes all our broken and inconsistent toml formatting and
adds CI to keep them tidy.

If people want we can customise the format rules as described here
https://taplo.tamasfe.dev/configuration/formatter-options.html

@ggwpez

, I suggest zepter is used only for checking features are
propagated, and leave formatting for taplo to avoid duplicate work and
conflicts.

TODO
- [x] Use `exclude = [...]` syntax in taplo file to ignore zombienet
tests instead of deleting the dir

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

# Description

- What does this PR do?
This PR adds function to get recorded keys from proof recorder instance
- Why are these changes needed?
This change is required to get the keys accessed by the trie backend
during the runtime execution. The keys are already tracked by proof
recorder, just aren't exposed publicly.
- How were these changes implemented and what do they affect?
The changes are implemented by adding a public function in proof
recorder that simply clones the `recorded_keys` field. It is pure
addition of function and AFAIK does not affect anything.


# Checklist

- [x] My PR includes a detailed description as outlined in the
"Description" section above
- [ ] My PR follows the [labeling requirements](CONTRIBUTING.md#Process)
of this project (at minimum one label for `T`
  required)
- [ ] I have made corresponding changes to the documentation (if
applicable)
- [ ] I have added tests that prove my fix is effective or that my
feature works (if applicable)

---------

Co-authored-by: Bastian Köcher <[email protected]>

In gossip-support, we shuffled the list of authorities using the
`rand::seq::SliceRandom::shuffle`. This function's behavior is
unspecified beyond being `O(n)` and could change in the future, leading
to network issues between nodes using different shuffling algorithms. In
practice, the implementation was a Fisher-Yates shuffle. This PR
replaces the call with a re-implementation of Fisher-Yates and adds a
test to ensure the behavior is the same between the two at the moment.

Bumps the known_good_semver group with 2 updates:
[serde](https://github.com/serde-rs/serde) and
[clap](https://github.com/clap-rs/clap).

Updates `serde` from 1.0.188 to 1.0.193
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/serde/releases">serde's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.193</h2>
<ul>
<li>Fix field names used for the deserialization of
<code>RangeFrom</code> and <code>RangeTo</code> (<a
href="https://redirect.github.com/serde-rs/serde/issues/2653">#2653</a>,
<a
href="https://redirect.github.com/serde-rs/serde/issues/2654">#2654</a>,
<a
href="https://redirect.github.com/serde-rs/serde/issues/2655">#2655</a>,
thanks <a
href="https://github.com/emilbonnek"><code>@​emilbonnek</code></a>)</li>
</ul>
<h2>v1.0.192</h2>
<ul>
<li>Allow internal tag field in untagged variant (<a
href="https://redirect.github.com/serde-rs/serde/issues/2646">#2646</a>,
thanks <a
href="https://github.com/robsdedude"><code>@​robsdedude</code></a>)</li>
</ul>
<h2>v1.0.191</h2>
<ul>
<li>Documentation improvements</li>
</ul>
<h2>v1.0.190</h2>
<ul>
<li>Preserve NaN sign when deserializing f32 from f64 or vice versa (<a
href="https://redirect.github.com/serde-rs/serde/issues/2637">#2637</a>)</li>
</ul>
<h2>v1.0.189</h2>
<ul>
<li>Fix &quot;cannot infer type&quot; error when internally tagged enum
contains untagged variant (<a
href="https://redirect.github.com/serde-rs/serde/issues/2613">#2613</a>,
thanks <a href="https://github.com/ahl"><code>@​ahl</code></a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/serde/commit/44613c7d0190dbb5ecd2d5ec19c636f45b7488cc"><code>44613c7</code></a>
Release 1.0.193</li>
<li><a
href="https://github.com/serde-rs/serde/commit/c706281df3c8d50dba1763f19c856df2746eba6c"><code>c706281</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2655">#2655</a>
from dtolnay/rangestartend</li>
<li><a
href="https://github.com/serde-rs/serde/commit/65d75b8fe3105f00ab2e01537d568d4587167582"><code>65d75b8</code></a>
Add RangeFrom and RangeTo tests</li>
<li><a
href="https://github.com/serde-rs/serde/commit/332b0cba40bcbcc7a6b23a9706277c54791a9856"><code>332b0cb</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2654">#2654</a>
from dtolnay/rangestartend</li>
<li><a
href="https://github.com/serde-rs/serde/commit/8c4af412969086bc8f54fdc2a079d373632e0a03"><code>8c4af41</code></a>
Fix more RangeFrom / RangeEnd mixups</li>
<li><a
href="https://github.com/serde-rs/serde/commit/24a78f071b22ae491eec4127be696ac255b9b5d3"><code>24a78f0</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2653">#2653</a>
from emilbonnek/fix/range-to-from-de-mixup</li>
<li><a
href="https://github.com/serde-rs/serde/commit/c91c33436d7aaef7472ebc18b734ddc9b5bd11fa"><code>c91c334</code></a>
Fix Range{From,To} deserialize mixup</li>
<li><a
href="https://github.com/serde-rs/serde/commit/2083f43a287cac8302009fda5bbe41518dd83209"><code>2083f43</code></a>
Update ui test suite to nightly-2023-11-19</li>
<li><a
href="https://github.com/serde-rs/serde/commit/4676abdc9e6bbbddfb33a00ce8d7e81e92f01120"><code>4676abd</code></a>
Release 1.0.192</li>
<li><a
href="https://github.com/serde-rs/serde/commit/35700eb23e21d8cb198ef4a422ddad13b855ce3b"><code>35700eb</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2646">#2646</a>
from robsdedude/fix/2643/allow-tag-field-in-untagged</li>
<li>Additional commits viewable in <a
href="https://github.com/serde-rs/serde/compare/v1.0.188...v1.0.193">compare
view</a></li>
</ul>
</details>
<br />

Updates `clap` from 4.4.6 to 4.4.10
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/releases">clap's
releases</a>.</em></p>
<blockquote>
<h2>v4.4.10</h2>
<h2>[4.4.10] - 2023-11-28</h2>
<h3>Documentation</h3>
<ul>
<li>Link out to changelog</li>
<li>Cross link derive's attribute reference to derive tutorial</li>
</ul>
<h2>v4.4.9</h2>
<h2>[4.4.9] - 2023-11-27</h2>
<h3>Fixes</h3>
<ul>
<li><em>(help)</em> Show correct <code>Command::about</code> under
flattened headings</li>
<li><em>(help)</em> Respect <code>hide</code> when flattening
subcommands</li>
</ul>
<h2>v4.4.8</h2>
<h2>[4.4.8] - 2023-11-10</h2>
<h3>Features</h3>
<ul>
<li>Add <code>Command::flatten_help</code> to allow <code>git stash
-h</code> like help for subcommands</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.4.10] - 2023-11-28</h2>
<h3>Documentation</h3>
<ul>
<li>Link out to changelog</li>
<li>Cross link derive's attribute reference to derive tutorial</li>
</ul>
<h2>[4.4.9] - 2023-11-27</h2>
<h3>Fixes</h3>
<ul>
<li><em>(help)</em> Show correct <code>Command::about</code> under
flattened headings</li>
<li><em>(help)</em> Respect <code>hide</code> when flattening
subcommands</li>
</ul>
<h2>[4.4.8] - 2023-11-10</h2>
<h3>Features</h3>
<ul>
<li>Add <code>Command::flatten_help</code> to allow <code>git stash
-h</code> like help for subcommands</li>
</ul>
<h2>[4.4.7] - 2023-10-24</h2>
<h3>Performance</h3>
<ul>
<li>Reduced code size</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/c0a1814d3c1d93c18faaedc95fd251846e47f4fe"><code>c0a1814</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/c83e681e20b05f7e128088f47f8fcfc44e8ea166"><code>c83e681</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/91bcac4ca9d442786f554abeb7b1ed6d7a464a42"><code>91bcac4</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5230">#5230</a>
from epage/migrate</li>
<li><a
href="https://github.com/clap-rs/clap/commit/030d87505d150345ddd425c1df21c034d2ae7748"><code>030d875</code></a>
docs: Link out to the changelog at the relevant tag</li>
<li><a
href="https://github.com/clap-rs/clap/commit/b661a9de04aebd1adaaafdbf7e470f07a8d8a36d"><code>b661a9d</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5229">#5229</a>
from epage/derive</li>
<li><a
href="https://github.com/clap-rs/clap/commit/a08587b00e347492165ded1415bad6ab339e9f0b"><code>a08587b</code></a>
docs(derive): Link to tutorial sections for attributes</li>
<li><a
href="https://github.com/clap-rs/clap/commit/21b671f689bc0b8d790dc8c42902c22822bf6f82"><code>21b671f</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/93ba76dbaaf9136313a4fe2978693cc39fa467dd"><code>93ba76d</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/c1c55b30d853446e2cab78664c0d22c1b77d4dfd"><code>c1c55b3</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5228">#5228</a>
from epage/flat</li>
<li><a
href="https://github.com/clap-rs/clap/commit/b13f6d98622b80ba30e63c2c6e65d218cc8a4de3"><code>b13f6d9</code></a>
fix(help): Hide 'help' if only flattened subcommand</li>
<li>Additional commits viewable in <a
href="https://github.com/clap-rs/clap/compare/v4.4.6...v4.4.10

">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

This PR is the same as
https://github.com/paritytech/polkadot-sdk/pull/2273, but that one had
too many conflicts after a base change. As it is a just one file PR I
decided to start over with a clean slate.

---
This PR adds some missing glossary definitions to the Developer Hub ref
docs

FIxes https://github.com/paritytech/polkadot-sdk-docs/issues/40

This PR provides the infrastructure for the pov-reclaim mechanism
discussed in #209. The goal is to provide the current proof size to the
runtime so it can be used to reclaim storage weight.

## New Host Function
- A new host function is provided
[here](https://github.com/skunert/polkadot-sdk/blob/5b317fda3be205f4136f10d4490387ccd4f9765d/cumulus/primitives/pov-reclaim/src/lib.rs#L23

).
It returns the size of the current proof size to the runtime. If
recording is not enabled, it returns 0.

## Implementation Overview
- Implement option to enable proof recording during import in the
client. This is currently enabled for `polkadot-parachain`,
`parachain-template` and the cumulus test node.
- Make the proof recorder ready for no-std. It was previously only
enabled for std environments, but we need to record the proof size in
`validate_block` too.
- Provide a recorder implementation that only the records the size of
incoming nodes and does not store the nodes itself.
- Fix benchmarks that were broken by async backing changes
- Provide new externalities extension that is registered by default if
proof recording is enabled.
- I think we should discuss the naming, pov-reclaim was more intuitive
to me, but we could also go with clawback like in the issue.

## Impact of proof recording during import
With proof recording: 6.3058 Kelem/s
Without proof recording: 6.3427 Kelem/s

The measured impact on the importing performance is quite low on my
machine using the block import benchmark. With proof recording I am
seeing a performance hit of 0.585%.

---------

Co-authored-by: command-bot <>
Co-authored-by: Davide Galassi <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>