resolve https://github.com/paritytech/polkadot-sdk/issues/3116

a follow-up on
https://github.com/paritytech/polkadot-sdk/pull/3061#pullrequestreview-1847530265:

- [x] reuse collator overseer builder for polkadot-node and collator
- [x] run zombienet test (0001-parachains-smoke-test.toml)
- [x] make wasm build errors more user-friendly for an easier problem
detection when using different toolchains in Rust

---------

Co-authored-by: ordian <[email protected]>
Co-authored-by: s0me0ne-unkn0wn <[email protected]>

Introduce storage attr macro `#[disable_try_decode_storage]` and set it on `System::Events` and `ParachainSystem::HostConfiguration` (#3454)

Closes https://github.com/paritytech/polkadot-sdk/issues/2560

Allows marking storage items with `#[disable_try_decode_storage]`, and
uses it with `System::Events`.

Question: what's the recommended way to write a test for this? I
couldn't find a test for similar existing macro `#[whitelist_storage]`.

Hey everyone,

this PR will replace existing Polkadotters bootnodes for Polkadot,
Kusama and Westend and add Paseo bootnode to the relay chain suite. At
the same time, it will add new bootnodes for all the system parachains,
including People on Westend. This PR is a part of our membership in the
IBP, meaning that all the bootnodes are hosted on our hardware housed in
the data center in Christchurch, New Zealand.
All the bootnodes were tested with an empty chain spec file with the
following command yielding 1 peer.

The test commands used are as follows:
```
./polkadot --base-path /tmp/node --reserved-only --chain paseo --reserved-nodes "/dns/paseo.bootnodes.polkadotters.com/tcp/30540/wss/p2p/12D3KooWPbbFy4TefEGTRF5eTYhq8LEzc4VAHdNUVCbY4nAnhqPP"
./polkadot --base-path /tmp/node --reserved-only --chain westend --reserved-nodes "/dns/westend.bootnodes.polkadotters.com/tcp/30310/wss/p2p/12D3KooWHPHb64jXMtSRJDrYFATWeLnvChL8NtWVttY67DCH1eC5"
./polkadot --base-path /tmp/node --reserved-only --chain kusama --reserved-nodes "/dns/kusama.bootnodes.polkadotters.com/tcp/30313/wss/p2p/12D3KooWHB5rTeNkQdXNJ9ynvGz8Lpnmsctt7Tvp7mrYv6bcwbPG"
./polkadot --base-path /tmp/node --no-hardware-benchmarks --reserved-only --chain polkadot --reserved-nodes "/dns/polkadot.bootnodes.polkadotters.com/tcp/30316/wss/p2p/12D3KooWPAVUgBaBk6n8SztLrMk8ESByncbAfRKUdxY1nygb9zG3"
./polkadot-parachain --base-path /tmp/node --reserved-only --chain asset-hub-kusama --reserved-nodes "/dns/asset-hub-kusama.bootnodes.polkadotters.com/tcp/30513/wss/p2p/12D3KooWDpk7wVH7RgjErEvbvAZ2kY5VeaAwRJP5ojmn1e8b8UbU"
./polkadot-parachain --base-path /tmp/node --reserved-only --chain asset-hub-polkadot --reserved-nodes "/dns/asset-hub-polkadot.bootnodes.polkadotters.com/tcp/30510/wss/p2p/12D3KooWKbfY9a9oywxMJKiALmt7yhrdQkjXMtvxhhDDN23vG93R"
./polkadot-parachain --base-path /tmp/node --reserved-only --chain asset-hub-westend --reserved-nodes "/dns/asset-hub-westend.bootnodes.polkadotters.com/tcp/30516/wss/p2p/12D3KooWNFYysCqmojxqjjaTfD2VkWBNngfyUKWjcR4WFixfHNTk"
./polkadot-parachain --base-path /tmp/node --reserved-only --chain bridge-hub-kusama --reserved-nodes "/dns/bridge-hub-kusama.bootnodes.polkadotters.com/tcp/30522/wss/p2p/12D3KooWH3pucezRRS5esoYyzZsUkKWcPSByQxEvmM819QL1HPLV"
./polkadot-parachain --base-path /tmp/node --reserved-only --chain bridge-hub-kusama --reserved-nodes "/dns/bridge-hub-kusama.bootnodes.polkadotters.com/tcp/30522/wss/p2p/12D3KooWH3pucezRRS5esoYyzZsUkKWcPSByQxEvmM819QL1HPLV"
./polkadot-parachain --base-path /tmp/node --reserved-only --chain bridge-hub-westend --reserved-nodes "/dns/bridge-hub-westend.bootnodes.polkadotters.com/tcp/30525/wss/p2p/12D3KooWPkwgJofp4GeeRwNgXqkp2aFwdLkCWv3qodpBJLwK43Jj"
./polkadot-parachain --base-path /tmp/node --reserved-only --chain collectives-polkadot --reserved-nodes "/dns/collectives-polkadot.bootnodes.polkadotters.com/tcp/30528/wss/p2p/12D3KooWNohUjvJtGKUa8Vhy8C1ZBB5N8JATB6e7rdLVCioeb3ff"
./polkadot-parachain --base-path /tmp/node --reserved-only --chain collectives-westend --reserved-nodes "/dns/collectives-westend.bootnodes.polkadotters.com/tcp/30531/wss/p2p/12D3KooWAFkXNSBfyPduZVgfS7pj5NuVpbU8Ee5gHeF8wvos7Yqn"
./polkadot-parachain --base-path /tmp/node --reserved-only --chain people-westend --reserved-nodes "/dns/identity-westend.bootnodes.polkadotters.com/tcp/30534/wss/p2p/12D3KooWKr9San6KTM7REJ95cBaDoiciGcWnW8TTftEJgxGF5Ehb"
```

Best regards,

Petr, Polkadotters

Does the following: 

- Add a reference doc page named `frame_runtime_types`, which explains
what types like `RuntimeOrigin`, `RuntimeCall` etc are.
- On top of it, it adds a reference doc page called `frame_origin` which
explains a few important patterns that we use around origins
- And finally brushes up `#[frame::origin]` docs. 
- Updates the theme, sidebar and favicon to look like: 

<img width="1728" alt="Screenshot 2024-02-20 at 12 16 00"
src="https://github.com/paritytech/polkadot-sdk/assets/5588131/6d60a16b-2081-411b-8869-43b91920cca9">


All of this was inspired by
https://substrate.stackexchange.com/questions/10992/how-do-you-find-the-public-key-for-the-medium-spender-track-origin/10993

closes https://github.com/paritytech/polkadot-sdk-docs/issues/45
closes https://github.com/paritytech/polkadot-sdk-docs/issues/43
contributes / overlaps with
https://github.com/paritytech/polkadot-sdk/pull/2638 cc @liamaharon


deprecation companion:
https://github.com/substrate-developer-hub/substrate-docs/pull/2131
pba-content companion:
https://github.com/Polkadot-Blockchain-Academy/pba-content/pull/977

---------

Co-authored-by: Radha <[email protected]>
Co-authored-by: Sebastian Kunert <[email protected]>
Co-authored-by: Gonçalo Pestana <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>

Related to https://github.com/paritytech/polkadot-sdk/issues/3475

When running `cargo test -p bridge-hub-rococo-runtime --features
runtime-benchmarks`, two of the Snowbridge benchmark tests fails. The
reason is that when the runtime-benchmarks feature is enabled, the
`NoopMessageProcessor` message processor is used. The Snowbridge tests
rely on the outbound messages to be processed using the message queue,
so that we can check the expected nonce and block digest logs.

This PR changes the conditional compilation to only use
`NoopMessageProcessor` when compiling the executable to run benchmarks
against, not when running tests.

---------

Co-authored-by: claravanstaden <Cats 4 life!>

Fix timeouts downloading the artifacts (e.g
https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/5246040)
Thx!

---------

Co-authored-by: Bastian Köcher <[email protected]>

# Description

*Refactors `String::from_utf8` usage in the pallet benchmarking

Fixes #389

---------

Co-authored-by: command-bot <>

Changes:
- Add CI script to check that the `crate` names that are mentioned in
prdocs are valid.

We can extend it lateron to also validate the correct SemVer bumps as
introduced in https://github.com/paritytech/polkadot-sdk/pull/3441.

Example output:
```pre
$ python3 .github/scripts/check-prdoc.py Cargo.toml prdoc/*.prdoc

🔎 Reading workspace polkadot-sdk/Cargo.toml.
📦 Checking 36 prdocs against 494 crates.
✅ All prdocs are valid.
```

Note that not all old prdocs pass the check since crates have been
renamed:
```pre
$ python3 .github/scripts/check-prdoc.py Cargo.toml prdoc/**/*.prdoc

🔎 Reading workspace polkadot-sdk/Cargo.toml.
📦 Checking 186 prdocs against 494 crates.
❌ Some prdocs are invalid.
💥 prdoc/1.4.0/pr_1926.prdoc lists invalid crate: node-cli
💥 prdoc/1.4.0/pr_2086.prdoc lists invalid crate: xcm-executor
💥 prdoc/1.4.0/pr_2107.prdoc lists invalid crate: xcm
💥

 prdoc/1.6.0/pr_2684.prdoc lists invalid crate: xcm-builder

```

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

Tests run as part of the `test-linux-stable` jobs could hang as shown
[here](https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/5341393).
This PR adds a failsafe for such cases.

While investigating some pruning issues I found some room for
improvement in the notification pin handling.

**Problem:** It was not possible to define an upper limit on
notification pins. The block pinning cache has a limit, but only handles
bodies and justifications.

After this PR, bookkeeping for notifications is managed in the pinning
worker. A limit can be defined in the worker. If that limit is crossed,
blocks that were pinned for that notification are unpinned, which now
affects the state as well as bodies and justifications. The pinned
blocks cache still has a limit, but should never be hit.

closes #19

---------

Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: André Silva <[email protected]>

Instead of only generating the error, we now generate the actual code
and the error. This generates in total less errors and helps the user to
identify the actual problem and not being confronted with tons of
errors.

with the deprecation of Rococo, Encointer needs a new staging
environment. Paseo will be Polkadot-focused and westend Kusama-focused,
so we propose to use Westend

## Problem
During the bumping of the `polkadot-fellows` repository to
`[email protected]`, I encountered a situation where the benchmarks
`teleport_assets` and `reserve_transfer_assets` in AssetHubKusama
started to fail. This issue arose due to a decreased ED balance for
AssetHubs introduced
[here](https://github.com/polkadot-fellows/runtimes/pull/158/files#diff-80668ff8e793b64f36a9a3ec512df5cbca4ad448c157a5d81abda1b15f35f1daR213),
and also because of a [missing CI
pipeline](https://github.com/polkadot-fellows/runtimes/issues/197) to
check the benchmarks, which went unnoticed.

These benchmarks expect the `caller` to have enough:
1. balance to transfer (BTT)
2. balance for paying delivery (BFPD).
 
So the initial balance was calculated as `ED * 100`, which seems
reasonable:
```
const ED_MULTIPLIER: u32 = 100;
let balance = existential_deposit.saturating_mul(ED_MULTIPLIER.into());`
```
The problem arises when the price for delivery is 100 times higher than
the existential deposit. In other words, when `ED * 100` does not cover
`BTT` + `BFPD`.

I check AHR/AHW/AHK/AHP and this problem has only AssetHubKusama
```
ED: 3333333
calculated price to parent delivery:  1031666634  (from xcm logs from the benchmark)
---

3333333 * 100 - BTT(3333333) - BFPD(1031666634) = −701666667
```
which results in the error;
```
2024-02-23 09:19:42 Unable to charge fee with error Module(ModuleError { index: 31, error: [17, 0, 0, 0], message: Some("FeesNotMet") })
Error: Input("Benchmark pallet_xcm::reserve_transfer_assets failed: FeesNotMet")
     
```

## Solution

The benchmarks `teleport_assets` and `reserve_transfer_assets` were
fixed by removing `ED * 100` and replacing it with `DeliveryHelper`
logic, which calculates the (almost real) price for delivery and sets it
along with the existential deposit as the initial balance for the
account used in the benchmark.


## TODO

- [ ] patch for 1.6 -
https://github.com/paritytech/polkadot-sdk/pull/3466
- [ ] patch for 1.7 -
https://github.com/paritytech/polkadot-sdk/pull/3465
- [ ] patch for 1.8 - TODO: PR

---------

Co-authored-by: Francisco Aguirre <[email protected]>

Add more debug logs to understand if statement-distribution is in a bad
state, should be useful for debugging
https://github.com/paritytech/polkadot-sdk/issues/3314 on production
networks.

Additionally, increase the number of parallel requests should make,
since I notice that requests take around 100ms on kusama, and the 5
parallel request was picked mostly random, no reason why we can do more
than that.

---------

Signed-off-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: ordian <[email protected]>

from Westend and Rococo.

---------

Co-authored-by: eskimor <[email protected]>
Co-authored-by: command-bot <>

Changes the runtime hash algorithm used in
`resolve_state_version_from_wasm` from `DefaultHasher` to a
caller-provided one (usually `HashingFor<Block>`), to match the one used
elsewhere.

This fixes an issue where the runtime wasm is compiled 3 times when
starting the `tanssi-node` with `--dev`. With this fix, the runtime wasm
is only compiled 2 times. The other redundant compilation is caused by
the `GenesisConfigBuilderRuntimeCaller` struct, which ignores the
runtime cache.

---------

Co-authored-by: Bastian Köcher <[email protected]>

Fixes https://github.com/paritytech/polkadot-sdk/issues/3144

Builds on top of https://github.com/paritytech/polkadot-sdk/pull/3229

### Summary
Some preparations for Runtime to support elastic scaling, guarded by
config node features bit `FeatureIndex::ElasticScalingMVP`. This PR
introduces a per-candidate `CoreIndex` but does it in a hacky way to
avoid changing `CandidateCommitments`, `CandidateReceipts` primitives
and networking protocols.

#### Including `CoreIndex` in `BackedCandidate`
If the `ElasticScalingMVP` feature bit is enabled then
`BackedCandidate::validator_indices` is extended by 8 bits.
The value stored in these bits represents the assumed core index for the
candidate.

It is temporary solution which works by creating a mapping from
`BackedCandidate` to `CoreIndex` by assuming the `CoreIndex` can be
discovered by checking in which validator group the validator that
signed the statement is.

TODO:
- [x] fix tests
- [x] add new tests
- [x] Bump runtime API for Kusama, so we have that node features thing!
-> https://github.com/polkadot-fellows/runtimes/pull/194

---------

Signed-off-by: Andrei Sandu <[email protected]>
Signed-off-by: alindima <[email protected]>
Co-authored-by: alindima <[email protected]>

Related to https://github.com/paritytech/polkadot-sdk/issues/3400

Moving all bridges testing "framework" files under one folder in order
to be able to download the entire folder when we want to add tests in
other repos

No significant functional changes

# Runtime side for PoV Reclaim

## Implementation Overview
- Hostfunction to fetch the storage proof size has been added to the
PVF. It uses the size tracking recorder that was introduced in my
previous PR.
- Mechanisms to use the reclaim HostFunction have been introduced.
- 1. A SignedExtension that checks the node-reported proof size before
and after application of an extrinsic. Then it reclaims the difference.
- 2. A manual helper to make reclaiming easier when manual interaction
is required, for example in `on_idle` or other hooks.
- In order to utilize the manual reclaiming, I modified `WeightMeter` to
support the reduction of consumed weight, at least for storage proof
size.

## How to use
To enable the general functionality for a parachain:
1. Add the SignedExtension to your parachain runtime. 
2. Provide the HostFunction to the node
3. Enable proof recording during block import

## TODO
- [x] PRDoc

---------

Co-authored-by: Dmitry Markin <[email protected]>
Co-authored-by: Davide Galassi <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

## Summary
* use benchamarked weights instead of hardcoded ones for
`pallet-membership`
* rename benchmark to match extrinsic name
* remove unnecessary dependency from `clear_prime`

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

Add a `ApiVersion` constant to the pallet-contracts Config to
communicate with developers the current state of the host functions
exposed by the pallet

By passing `RUST_LOG=info` to the check command, we will be able to see
the exact problem with a given prdoc.

Before:
```
PR #3243 -> ERR
```

After:
```
[2024-02-23T12:53:55Z INFO  prdoclib::commands::check] Checking directory prdoc
[2024-02-23T12:53:55Z INFO  prdoclib::commands::check] Using schema: /Users/sebastian/work/repos/polkadot-sdk/prdoc/schema_user.json
[2024-02-23T12:53:55Z WARN  prdoclib::schema] validation_result: false
[2024-02-23T12:53:55Z WARN  prdoclib::schema] validation_result_strict: false
[2024-02-23T12:53:55Z WARN  prdoclib::schema] errors: [
        Required {
            path: "/title",
        },
    ]
[2024-02-23T12:53:55Z WARN  prdoclib::schema] missing: []
[2024-02-23T12:53:55Z ERROR prdoclib::commands::check] Loading the schema failed:
[2024-02-23T12:53:55Z ERROR prdoclib::commands::check] ValidationErrors(ValidationState { errors: [Required { path: "/title" }], missing: [], replacement: None, evaluated: {"/doc/0/description", "/crates/0/name", "/doc/0", "/crates", "/crates/0", "", "/doc", "/doc/0/audience"} })
PR #3243 -> ERR
```

The `fee` should be calculated with the reanchored asset, otherwise it
could lead to a failure where the set aside fee ends up not being
enough.

@acatangiu



---------

Co-authored-by: Adrian Catangiu <[email protected]>

Related to https://github.com/paritytech/polkadot-sdk/issues/3400

Extracting small parts of
https://github.com/paritytech/polkadot-sdk/pull/3429 into separate PR:

- Add support for BHP local and BHK local
- Increase the timeout for the bridge zomienet tests

This introduces a check to ensure that the parachain code matches the
validation code stored in the relay chain state. If not, it will print a
warning. This should be mainly useful for parachain builders to make
sure they have setup everything correctly.

As part of BEEFY worker/voter initialization the task waits for certain
chain and backend conditions to be fulfilled:
- BEEFY consensus enabled on-chain & GRANDPA best finalized higher than
on-chain BEEFY genesis block,
- backend has synced headers for BEEFY mandatory blocks between best
BEEFY and best GRANDPA.

During this waiting time, any messages gossiped on the BEEFY topic for
current chain get enqueued in the gossip engine, leading to RAM bloating
and output warning/error messages when the wait time is non-negligible
(like during a clean sync).

This PR adds logic to pump the gossip engine while waiting for other
things to make sure gossiped messages get consumed (practically
discarded until worker is fully initialized).

Also raises the warning threshold for enqueued messages from 10k to
100k. This is in line with the other gossip protocols on the node.

Fixes https://github.com/paritytech/polkadot-sdk/issues/3390

---------

Signed-off-by: Adrian Catangiu <[email protected]>

This PR fixes a subtle bug in `wasm-builder` first introduced in
https://github.com/paritytech/polkadot-sdk/pull/1851 (sorry, my bad! I
should have caught this during review) where the status code of the
`cargo` subprocess is not properly checked, which results in builds
silently succeeding when they shouldn't (that is: if we successfully
build a runtime blob, and then modify the code so that it won't compile,
and recompile it again, then the build will succeed and silently use the
*old* blob).

cc @athei This is the bug you were seeing.

[edit]Also fixes a similar PolkaVM-specific bug where I accidentally
used the wrong comparison operator.[/edit]

This PR adds two more public channels in matrix where should the release
announcements go

First step in implementing
https://github.com/paritytech/polkadot-sdk/issues/3144

### Summary of changes
- switch statement `Table` candidate mapping from `ParaId` to
`CoreIndex`
- introduce experimental `InjectCoreIndex`  node feature.
- determine and assume a `CoreIndex` for a candidate based on statement
validator index. If the signature is valid it means validator controls
the validator that index and we can easily map it to a validator
group/core.
- introduce a temporary provisioner fix until we fully enable elastic
scaling in the subystem. The fix ensures we don't fetch the same
backable candidate when calling `get_backable_candidate` for each core.

TODO:
- [x] fix backing tests
- [x] fix statement table tests
- [x] add new test

---------

Signed-off-by: Andrei Sandu <[email protected]>
Signed-off-by: alindima <[email protected]>
Co-authored-by: alindima <[email protected]>

Closes https://github.com/paritytech/polkadot-sdk/issues/2713

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: André Silva <[email protected]>

part of #3326 

@ggwpez @Kianenigma @shawntabrizi



---------

Signed-off-by: Matteo Muraca <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>

In Tanssi, we need a way to stop the collator code and then start it
again. This is to support rotating the same collator between different
runtimes. Currently, this works very well, except for the proposer
metrics, because they only get registered the first time they are
started. Afterwards, we see this warning log:

> Failed to register proposer prometheus metrics: Duplicate metrics
collector registration attempted


~~So this PR adds a method to set metrics, to allow us to register
metrics manually before creating the `ProposerFactory`, and then clone
the same metrics every time we need to start the collator.~~ Implemented
Clone instead

This PR backports the changes from the rpc-v2 spec:
https://github.com/paritytech/json-rpc-interface-spec/pull/134

The `Broadcasted` event has been removed:
- it is hard to enforce a `Dropped { broadcasted: bool }` event in cases
of a load-balancer being placed in front of an RPC server
- when the server exists, it is impossible to guarantee this field if
the server did not previously send a `Broadcasted` event
- the number of peers reported by this event does not guarantee that
peers are unique
- the same peer can disconnect and reconnect, increasing this metric
number
- the number of peers that receive this transaction offers no guarantee
about the transaction being included in the chain at a later time


cc @paritytech/subxt-team

---------

Signed-off-by: Alexandru Vasile <[email protected]>
Co-authored-by: James Wilson <[email protected]>

closes #2844 

- adds `list-pallets` option which prints all unique available pallets
for benchmarking
```bash
./target/release/node benchmark pallet --list=pallets
```
- adds `all` option which runs benchmarks for all available pallets and
extrinsics (equivalent to `--pallet * --extrinsic *`)
```bash
./target/release/node benchmark pallet --all
```

- use the `list=pallets` syntax in `run_all_benchmarks.sh` script

cc ggwpez

---------

Co-authored-by: Bastian Köcher <[email protected]>

- Adds a test to check the correct digest for Snowbridge outbound
messages. For the correct digest to be in the block, the the
MessageQueue pallet should be configured after the EthereumOutbound
queue pallet. The added test fails if the EthereumOutbound is configured
after the MessageQueue pallet.
- Adds a helper method `run_to_block_with_finalize` to simulate the
block finalizing. The existing `run_to_block` method does not finalize
and so it cannot successfully test this condition.

Closes: https://github.com/paritytech/polkadot-sdk/issues/3208

---------

Co-authored-by: claravanstaden <Cats 4 life!>

This PR should fix the issue with the failing GHA which sends
notifications to the different matrix channels, when the new release is
published

fixes https://github.com/paritytech/polkadot-sdk/issues/3407

This PR is fixing a bug in the sync mechanism between wasmi and
pallet-contracts. This bug leads to essentially double charging all the
gas that was used during the execution of the host function. When the
`call` host function is used for recursion this will lead to a quadratic
amount of gas consumption with regard to the nesting depth.We also took
the chance to refactor the code in question and improve the rust docs.

The bug was caused by not updating `GasMeter::executor_consumed`
(previously `engine_consumed`) when leaving the host function. This lead
to the value being stale (too low) when entering another host function.

---------

Co-authored-by: PG Herveou <[email protected]>

I dont think this bound is required by anything else and it allows now
to use this struct with runtimes that have 20 bytes accounts

---------

Co-authored-by: Bastian Köcher <[email protected]>