- Nov 27, 2023
-
-
Adrian Catangiu authored
Just adds more tests.
-
- Nov 14, 2023
-
-
Adrian Catangiu authored
- switch from Rococo<>Wococo to Rococo<>Westend bridge - add bidirectional simple tests - remove Wococo chains from xcm-emulator - added tests for assets transfers over Rococo<>Westend bridge fixes https://github.com/paritytech/parity-bridges-common/issues/2405
-
- Nov 13, 2023
-
-
Adrian Catangiu authored
## Motivation `pallet-xcm` is the main user-facing interface for XCM functionality, including assets manipulation functions like `teleportAssets()` and `reserve_transfer_assets()` calls. While `teleportAsset()` works both ways, `reserve_transfer_assets()` works only for sending reserve-based assets to a remote destination and beneficiary when the reserve is the _local chain_. ## Solution This PR enhances `pallet_xcm::(limited_)reserve_withdraw_assets` to support transfers when reserves are other chains. This will allow complete, **bi-directional** reserve-based asset transfers user stories using `pallet-xcm`. Enables following scenarios: - transferring assets with local reserve (was previously supported iff asset used as fee also had local reserve - now it works in all cases), - transferring assets with reserve on destination, - transferring assets with reserve on remote/third-party chain (iff assets and fees have same remote reserve), - transferring assets with reserve different than the reserve of the asset to be used as fees - meaning can be used to transfer random asset with local/dest reserve while using DOT for fees on all involved chains, even if DOT local/dest reserve doesn't match asset reserve, - transferring assets with any type of local/dest reserve while using fees which can be teleported between involved chains. All of the above is done by pallet inner logic without the user having to specify which scenario/reserves/teleports/etc. The correct scenario and corresponding XCM programs are identified, and respectively, built automatically based on runtime configuration of trusted teleporters and trusted reserves. #### Current limitations: - while `fees` and "non-fee" `assets` CAN have different reserves (or fees CAN be teleported), the remaining "non-fee" `assets` CANNOT, among themselves, have different reserve locations (this is also implicitly enforced by `MAX_ASSETS_FOR_TRANSFER=2`, but this can be safely increased in the future). - `fees` and "non-fee" `assets` CANNOT have **different remote** reserves (this could also be supported in the future, but adds even more complexity while possibly not being worth it - we'll see what the future holds). Fixes https://github.com/paritytech/polkadot-sdk/issues/1584 Fixes https://github.com/paritytech/polkadot-sdk/issues/2055 --------- Co-authored-by: Francisco Aguirre <[email protected]> Co-authored-by: Branislav Kontur <[email protected]>
-
- Nov 08, 2023
-
-
Michal Kucharczyk authored
Some legacy tests were mistakenly merged in #1256 for `emulated-integration-tests-common` crate. This PR fixes the function name `build_genesis_storage` (no need to use `legacy` suffix, even though the genesis is built from `RuntimeGenesisConfig`).
-
Ignacio Palacios authored
Closes: - #1383 - Declared chains can be now be imported and reused in a different crate. - Chain declaration are now generic over a generic type `N` (the Network) - #1389 - Solved #1383, chains and networks declarations can be restructure to avoid having to compile all chains when running integrations tests where are not needed. - Chains are now declared on its own crate (removed from `integration-tests-common`) - Networks are now declared on its own crate (removed from `integration-tests-common`) - Integration tests will import only the relevant Network crate - `integration-tests-common` is renamed to `emulated-integration-tests-common` All this is necessary to be able to implement what is described here: https://github.com/paritytech/roadmap/issues/56#issuecomment-1777010553 --------- Co-authored-by: command-bot <>
-
Adrian Catangiu authored
`bridge-hub-westend-runtime` was added to cumulus/parachains, but wasn't hooked up to xcm-emulator to run tests against it. This commit addresses that ^. Signed-off-by: Adrian Catangiu <[email protected]>
-
- Nov 05, 2023
-
-
Michal Kucharczyk authored
This PR prepares chains specs for _native-runtime-free_ world. This PR has following changes: - `substrate`: - adds support for: - JSON based `GenesisConfig` to `ChainSpec` allowing interaction with runtime `GenesisBuilder` API. - interacting with arbitrary runtime wasm blob to[ `chain-spec-builder`](https://github.com/paritytech/substrate/blob/3ef576eaeb3f42610e85daecc464961cf1295570/bin/utils/chain-spec-builder/src/lib.rs#L46) command line util, - removes [`code`](https://github.com/paritytech/substrate/blob/3ef576eaeb3f42610e85daecc464961cf1295570/frame/system/src/lib.rs#L660) from `system_pallet` - adds `code` to the `ChainSpec` - deprecates [`ChainSpec::from_genesis`](https://github.com/paritytech/substrate/blob/3ef576eaeb3f42610e85daecc464961cf1295570/client/chain-spec/src/chain_spec.rs#L263), but also changes the signature of this method extending it with `code` argument. [`ChainSpec::builder()`](https://github.com/paritytech/substrate/blob/20bee680ed098be7239cf7a6b804cd4de267983e/client/chain-spec/src/chain_spec.rs#L507 ) should be used instead. - `polkadot`: - all references to `RuntimeGenesisConfig` in `node/service` are removed, - all `(kusama|polkadot|versi|rococo|wococo)_(staging|dev)_genesis_config` functions now return the JSON patch for default runtime `GenesisConfig`, - `ChainSpecBuilder` is used, `ChainSpec::from_genesis` is removed, - `cumulus`: - `ChainSpecBuilder` is used, `ChainSpec::from_genesis` is removed, - _JSON_ patch configuration used instead of `RuntimeGenesisConfig struct` in all chain specs. --------- Co-authored-by: command-bot <> Co-authored-by: Javier Viola <[email protected]> Co-authored-by: Davide Galassi <[email protected]> Co-authored-by: Francisco Aguirre <[email protected]> Co-authored-by: Kevin Krone <[email protected]> Co-authored-by: Bastian Köcher <[email protected]>
-
- Nov 02, 2023
-
-
Oliver Tale-Yazdi authored
(imported from https://github.com/paritytech/cumulus/pull/2157) ## Changes This MR refactores the XCMP, Parachains System and DMP pallets to use the [MessageQueue](https://github.com/paritytech/substrate/pull/12485) for delayed execution of incoming messages. The DMP pallet is entirely replaced by the MQ and thereby removed. This allows for PoV-bounded execution and resolves a number of issues that stem from the current work-around. All System Parachains adopt this change. The most important changes are in `primitives/core/src/lib.rs`, `parachains/common/src/process_xcm_message.rs`, `pallets/parachain-system/src/lib.rs`, `pallets/xcmp-queue/src/lib.rs` and the runtime configs. ### DMP Queue Pallet The pallet got removed and its logic refactored into parachain-system. Overweight message management can be done directly through the MQ pallet. Final undeployment migrations are provided by `cumulus_pallet_dmp_queue::UndeployDmpQueue` and `DeleteDmpQueue` that can be configured with an aux config trait like: ```rust parameter_types! { pub const DmpQueuePalletName: &'static str = \"DmpQueue\" < CHANGE ME; pub const RelayOrigin: AggregateMessageOrigin = AggregateMessageOrigin::Parent; } impl cumulus_pallet_dmp_queue::MigrationConfig for Runtime { type PalletName = DmpQueuePalletName; type DmpHandler = frame_support::traits::EnqueueWithOrigin<MessageQueue, RelayOrigin>; type DbWeight = <Runtime as frame_system::Config>::DbWeight; } // And adding them to your Migrations tuple: pub type Migrations = ( ... cumulus_pallet_dmp_queue::UndeployDmpQueue<Runtime>, cumulus_pallet_dmp_queue::DeleteDmpQueue<Runtime>, ); ``` ### XCMP Queue pallet Removed all dispatch queue functionality. Incoming XCMP messages are now either: Immediately handled if they are Signals, enqueued into the MQ pallet otherwise. New config items for the XCMP queue pallet: ```rust /// The actual queue implementation that retains the messages for later processing. type XcmpQueue: EnqueueMessage<ParaId>; /// How a XCM over HRMP from a sibling parachain should be processed. type XcmpProcessor: ProcessMessage<Origin = ParaId>; /// The maximal number of suspended XCMP channels at the same time. #[pallet::constant] type MaxInboundSuspended: Get<u32>; ``` How to configure those: ```rust // Use the MessageQueue pallet to store messages for later processing. The `TransformOrigin` is needed since // the MQ pallet itself operators on `AggregateMessageOrigin` but we want to enqueue `ParaId`s. type XcmpQueue = TransformOrigin<MessageQueue, AggregateMessageOrigin, ParaId, ParaIdToSibling>; // Process XCMP messages from siblings. This is type-safe to only accept `ParaId`s. They will be dispatched // with origin `Junction::Sibling(…)`. type XcmpProcessor = ProcessFromSibling< ProcessXcmMessage< AggregateMessageOrigin, xcm_executor::XcmExecutor<xcm_config::XcmConfig>, RuntimeCall, >, >; // Not really important what to choose here. Just something larger than the maximal number of channels. type MaxInboundSuspended = sp_core::ConstU32<1_000>; ``` The `InboundXcmpStatus` storage item was replaced by `InboundXcmpSuspended` since it now only tracks inbound queue suspension and no message indices anymore. Now only sends the most recent channel `Signals`, as all prio ones are out-dated anyway. ### Parachain System pallet For `DMP` messages instead of forwarding them to the `DMP` pallet, it now pushes them to the configured `DmpQueue`. The message processing which was triggered in `set_validation_data` is now being done by the MQ pallet `on_initialize`. XCMP messages are still handed off to the `XcmpMessageHandler` (XCMP-Queue pallet) - no change here. New config items for the parachain system pallet: ```rust /// Queues inbound downward messages for delayed processing. /// /// Analogous to the `XcmpQueue` of the XCMP queue pallet. type DmpQueue: EnqueueMessage<AggregateMessageOrigin>; ``` How to configure: ```rust /// Use the MQ pallet to store DMP messages for delayed processing. type DmpQueue = MessageQueue; ``` ## Message Flow The flow of messages on the parachain side. Messages come in from the left via the `Validation Data` and finally end up at the `Xcm Executor` on the right. ![Untitled (1)](https://github.com/paritytech/cumulus/assets/10380170/6cf8b377-88c9-4aed-96df-baace266e04d) ## Further changes - Bumped the default suspension, drop and resume thresholds in `QueueConfigData::default()`. - `XcmpQueue::{suspend_xcm_execution, resume_xcm_execution}` errors when they would be a noop. - Properly validate the `QueueConfigData` before setting it. - Marked weight files as auto-generated so they wont auto-expand in the MR files view. - Move the `hypothetical` asserts to `frame_support` under the name `experimental_hypothetically` Questions: - [ ] What about the ugly `#[cfg(feature = \"runtime-benchmarks\")]` in the runtimes? Not sure how to best fix. Just having them like this makes tests fail that rely on the real message processor when the feature is enabled. - [ ] Need a good weight for `MessageQueueServiceWeight`. The scheduler already takes 80% so I put it to 10% but that is quite low. TODO: - [x] Remove c&p code after https://github.com/paritytech/polkadot/pull/6271 - [x] Use `HandleMessage` once it is public in Substrate - [x] fix `runtime-benchmarks` feature https://github.com/paritytech/polkadot/pull/6966 - [x] Benchmarks - [x] Tests - [ ] Migrate `InboundXcmpStatus` to `InboundXcmpSuspended` - [x] Possibly cleanup Migrations (DMP+XCMP) - [x] optional: create `TransformProcessMessageOrigin` in Substrate and replace `ProcessFromSibling` - [ ] Rerun weights on ref HW --------- Signed-off-by: Oliver Tale-Yazdi <[email protected]> Co-authored-by: Liam Aharon <[email protected]> Co-authored-by: joe petrowski <[email protected]> Co-authored-by: Kian Paimani <[email protected]> Co-authored-by: command-bot <>
-
- Nov 01, 2023
-
-
Branislav Kontur authored
## Summary Asset bridging support for AssetHub**Rococo** <-> AssetHub**Wococo** was added [here](https://github.com/paritytech/polkadot-sdk/pull/1215), so now we aim to bridge AssetHub**Rococo** and AssetHub**Westend**. (And perhaps retire AssetHubWococo and the Wococo chains). ## Solution **bridge-hub-westend-runtime** - added new runtime as a copy of `bridge-hub-rococo-runtime` - added support for bridging to `BridgeHubRococo` - added tests and benchmarks **bridge-hub-rococo-runtime** - added support for bridging to `BridgeHubWestend` - added tests and benchmarks - internal refactoring by splitting bridge configuration per network, e.g., `bridge_to_whatevernetwork_config.rs`. **asset-hub-rococo-runtime** - added support for asset bridging to `AssetHubWestend` (allows to receive only WNDs) - added new xcm router for `Westend` - added tests and benchmarks **asset-hub-westend-runtime** - added support for asset bridging to `AssetHubRococo` (allows to receive only ROCs) - added new xcm router for `Rococo` - added tests and benchmarks ## Deployment All changes will be deployed as a part of https://github.com/paritytech/polkadot-sdk/issues/1988. ## TODO - [x] benchmarks for all pallet instances - [x] integration tests - [x] local run scripts Relates to: https://github.com/paritytech/parity-bridges-common/issues/2602 Relates to: https://github.com/paritytech/polkadot-sdk/issues/1988 --------- Co-authored-by: command-bot <> Co-authored-by: Adrian Catangiu <[email protected]> Co-authored-by: joe petrowski <[email protected]>
-
- Oct 23, 2023
-
-
Branislav Kontur authored
This PR does not introduce any functional changes to the existing code, it merely addresses several minor refactors: - Moving bridging pallets to separate files. - Improving the readability and naming of weight files for bridging pallets and bridging pallet instances. The reason for this refactor is to facilitate easier plugin integration for the upcoming bridge between Rococo and Westend. --------- Co-authored-by: command-bot <>
-
- Oct 20, 2023
-
-
Francisco Aguirre authored
Removed some debug logs
-
- Oct 18, 2023
-
-
Keith Yeung authored
Combination of paritytech/polkadot#7005, its addon PR paritytech/polkadot#7585 and its companion paritytech/cumulus#2433. This PR introduces a new XcmFeesToAccount struct which implements the `FeeManager` trait, and assigns this struct as the `FeeManager` in the XCM config for all runtimes. The struct simply deposits all fees handled by the XCM executor to a specified account. In all runtimes, the specified account is configured as the treasury account. XCM __delivery__ fees are now being introduced (unless the root origin is sending a message to a system parachain on behalf of the originating chain). # Note for reviewers Most file changes are tests that had to be modified to account for the new fees. Main changes are in: - cumulus/pallets/xcmp-queue/src/lib.rs <- To make it track the delivery fees exponential factor - polkadot/xcm/xcm-builder/src/fee_handling.rs <- Added. Has the FeeManager implementation - All runtime xcm_config files <- To add the FeeManager to the XCM configuration # Important note After this change, instructions that create and send a new XCM (Query*, Report*, ExportMessage, InitiateReserveWithdraw, InitiateTeleport, DepositReserveAsset, TransferReserveAsset, LockAsset and RequestUnlock) will require the corresponding origin account in the origin register to pay for transport delivery fees, and the onward message will fail to be sent if the origin account does not have the required amount. This delivery fee is on top of what we already collect as tx fees in pallet-xcm and XCM BuyExecution fees! Wallet UIs that want to expose the new delivery fee can do so using the formula: ``` delivery_fee_factor * (base_fee + encoded_msg_len * per_byte_fee) ``` where the delivery fee factor can be obtained from the corresponding pallet based on which transport you are using (UMP, HRMP or bridges), the base fee is a constant, the encoded message length from the message itself and the per byte fee is the same as the configured per byte fee for txs (i.e. `TransactionByteFee`). --------- Co-authored-by: Branislav Kontur <[email protected]> Co-authored-by: joe petrowski <[email protected]> Co-authored-by: Giles Cope <[email protected]> Co-authored-by: command-bot <> Co-authored-by: Francisco Aguirre <[email protected]> Co-authored-by: Liam Aharon <[email protected]> Co-authored-by: Kian Paimani <[email protected]>
-
Adrian Catangiu authored
cumulus: add asset-hub-rococo runtime based on asset-hub-kusama and add asset-bridging support to it (#1215) This commit adds Rococo Asset Hub dedicated runtime so we can test new features here, before merging them in Kusama Asset Hub. Also adds one such feature: asset transfer over bridge (Rococo AssetHub <> Wococo AssetHub) - clone `asset-hub-kusama-runtime` -> `asset-hub-rococo-runtime` - make it use Rococo primitives, names, assets, constants, etc - add asset-transfer-over-bridge support to Rococo AssetHub <> Wococo AssetHub Fixes #1128 --------- Co-authored-by: Branislav Kontur <[email protected]> Co-authored-by: joe petrowski <[email protected]> Co-authored-by: Francisco Aguirre <[email protected]>
-
- Oct 16, 2023
-
-
Ignacio Palacios authored
Make System Parachain trusted Teleporters of each other. Migration of https://github.com/paritytech/cumulus/pull/2842 --------- Co-authored-by: command-bot <> Co-authored-by: joe petrowski <[email protected]>
-
- Oct 12, 2023
-
-
Tsvetomir Dimitrov authored
Exposes disabled validators list via a runtime API. --------- Co-authored-by: ordian <[email protected]> Co-authored-by: ordian <[email protected]>
-
- Oct 11, 2023
-
-
Branislav Kontur authored
# Desription ## Summary This PR introduces several nits and tweaks to xcm emulator tests for system parachains. ## Explanation **Deduplicate `XcmPallet::send(` with root origin code** - Introduced `send_transact_to_parachain` which could be easily reuse for scenarios like _governance call from relay chain to parachain_. **Refactor `send_transact_sudo_from_relay_to_system_para_works`** - Test covered just one use-case which was moved to the `do_force_create_asset_from_relay_to_system_para`, so now we can extend this test with more _governance-like_ senarios. - Renamed to `send_transact_as_superuser_from_relay_to_system_para_works`. **Remove `send_transact_native_from_relay_to_system_para_fails` test** - This test and/or description is kind of misleading, because system paras support Native from relay chain by `RelayChainAsNative` with correct xcm origin. - It tested only sending on relay chain which should go directly to the relay chain unit-tests (does not even need to be in xcm emulator level). ## Future directions Check restructure parachains integration tests [issue](https://github.com/paritytech/polkadot-sdk/issues/1389) and [PR with more TODOs](https://github.com/paritytech/polkadot-sdk/pull/1693 ). --------- Co-authored-by: Ignacio Palacios <[email protected]>
-
- Oct 10, 2023
-
-
Branislav Kontur authored
[xcm] Use `Weight::MAX` for `reserve_asset_deposited`, `receive_teleported_asset` benchmarks (#1726) # Description ## Summary Previously, the `pallet_xcm::do_reserve_transfer_assets` and `pallet_xcm::do_teleport_assets` functions relied on weight estimation for remote chain execution, which was based on guesswork derived from the local chain. This approach led to complications for runtimes that did not provide or support specific [XCM configurations](https://github.com/paritytech/polkadot-sdk/blob/7cbe0c76ef8fd2aabf9f07de0156941ce3ed44b0/polkadot/xcm/xcm-executor/src/config.rs#L43-L47) for `IsReserve` or `IsTeleporter`. Consequently, such runtimes had to resort to implementing hard-coded weights for XCM instructions like `reserve_asset_deposited` or `receive_teleported_asset` to support extrinsics such as `pallet_xcm::reserve_transfer_assets` and `pallet_xcm::teleport_assets`, which depended on remote weight estimation. The issue of remote weight estimation was addressed and resolved by [Pull Request #1645](https://github.com/paritytech/polkadot-sdk/pull/1645), which removed the need for remote weight estimation. ## Solution As a continuation of this improvement, the current PR proposes further cleanup by removing unnecessary hard-coded values and rectifying benchmark results with `Weight::MAX` that previously used `T::BlockWeights::get().max_block` as an override for unsupported XCM instructions like `ReserveAssetDeposited` and `ReceiveTeleportedAsset`. ## Questions - [x] Can we remove now also `Hardcoded till the XCM pallet is fixed` for `deposit_asset`? E.g. for AssetHubKusama [here](https://github.com/paritytech/polkadot-sdk/blob/7cbe0c76ef8fd2aabf9f07de0156941ce3ed44b0/cumulus/parachains/runtimes/assets/asset-hub-kusama/src/weights/xcm/mod.rs#L129-L134) - [x] Are comments like [this](https://github.com/paritytech/polkadot-sdk/blob/7cbe0c76ef8fd2aabf9f07de0156941ce3ed44b0/polkadot/runtime/kusama/src/weights/xcm/mod.rs#L94) `// Kusama doesn't support ReserveAssetDeposited, so this benchmark has a default weight` still relevant? Shouldnt be removed/changed? ## TODO - [x] `bench bot` regenerate xcm weights for all runtimes - [x] remove hard-coded stuff from system parachain weight files - [ ] when merged, open `polkadot-fellow/runtimes` PR ## References Fixes #1132 Closes #1132 Old polkadot repo [PR](https://github.com/paritytech/polkadot/pull/7546) --------- Co-authored-by: command-bot <>
-
- Oct 07, 2023
-
-
Muharem Ismailov authored
### Summary This PR introduces new dispatchables to the treasury pallet, allowing spends of various asset types. The enhanced features of the treasury pallet, in conjunction with the asset-rate pallet, are set up and enabled for Westend and Rococo. ### Westend and Rococo runtimes. Polkadot/Kusams/Rococo Treasury can accept proposals for `spends` of various asset kinds by specifying the asset's location and ID. #### Treasury Instance New Dispatchables: - `spend(AssetKind, AssetBalance, Beneficiary, Option<ValidFrom>)` - propose and approve a spend; - `payout(SpendIndex)` - payout an approved spend or retry a failed payout - `check_payment(SpendIndex)` - check the status of a payout; - `void_spend(SpendIndex)` - void previously approved spend; > existing spend dispatchable renamed to spend_local in this context, the `AssetKind` parameter contains the asset's location and it's corresponding `asset_id`, for example: `USDT` on `AssetHub`, ``` rust location = MultiLocation(0, X1(Parachain(1000))) asset_id = MultiLocation(0, X2(PalletInstance(50), GeneralIndex(1984))) ``` the `Beneficiary` parameter is a `MultiLocation` in the context of the asset's location, for example ``` rust // the Fellowship salary pallet's location / account FellowshipSalaryPallet = MultiLocation(1, X2(Parachain(1001), PalletInstance(64))) // or custom `AccountId` Alice = MultiLocation(0, AccountId32(network: None, id: [1,...])) ``` the `AssetBalance` represents the amount of the `AssetKind` to be transferred to the `Beneficiary`. For permission checks, the asset amount is converted to the native amount and compared against the maximum spendable amount determined by the commanding spend origin. the `spend` dispatchable allows for batching spends with different `ValidFrom` arguments, enabling milestone-based spending. If the expectations tied to an approved spend are not met, it is possible to void the spend later using the `void_spend` dispatchable. Asset Rate Pallet provides the conversion rate from the `AssetKind` to the native balance. #### Asset Rate Instance Dispatchables: - `create(AssetKind, Rate)` - initialize a conversion rate to the native balance for the given asset - `update(AssetKind, Rate)` - update the conversion rate to the native balance for the given asset - `remove(AssetKind)` - remove an existing conversion rate to the native balance for the given asset the pallet's dispatchables can be executed by the Root or Treasurer origins. ### Treasury Pallet Treasury Pallet can accept proposals for `spends` of various asset kinds and pay them out through the implementation of the `Pay` trait. New Dispatchables: - `spend(Config::AssetKind, AssetBalance, Config::Beneficiary, Option<ValidFrom>)` - propose and approve a spend; - `payout(SpendIndex)` - payout an approved spend or retry a failed payout; - `check_payment(SpendIndex)` - check the status of a payout; - `void_spend(SpendIndex)` - void previously approved spend; > existing spend dispatchable renamed to spend_local The parameters' types of the `spend` dispatchable exposed via the pallet's `Config` and allows to propose and accept a spend of a certain amount. An approved spend can be claimed via the `payout` within the `Config::SpendPeriod`. Clients provide an implementation of the `Pay` trait which can pay an asset of the `AssetKind` to the `Beneficiary` in `AssetBalance` units. The implementation of the Pay trait might not have an immediate final payment status, for example if implemented over `XCM` and the actual transfer happens on a remote chain. The `check_status` dispatchable can be executed to update the spend's payment state and retry the `payout` if the payment has failed. --------- Co-authored-by: joe petrowski <[email protected]> Co-authored-by: command-bot <>
-
- Sep 29, 2023
-
-
Sebastian Kunert authored
-
Bastian Köcher authored
This pull request is removing the Kusama and Polkadot runtime crates. As still some crates dependent on the runtime crates, this pull request is doing some more changes. - It removes the `hostperfcheck` CLI command. This CLI command could compare the current node against the standard hardware by doing some checks. Later we added the hardware benchmark feature to Substrate. This hardware benchmark is running on every node startup and prints a warning if the current node is too slow. This makes this CLI command a duplicate that was also depending on the kusama runtime. - The pull request is removing the emulated integration tests that were requiring the Kusama or Polkadot runtime crates.
-
- Sep 27, 2023
-
-
Chris Sosnin authored
- Async-backing related primitives are stable `primitives::v6` - Async-backing API is now part of `api_version(7)` - It's enabled on Rococo and Westend runtimes --------- Signed-off-by: Andrei Sandu <[email protected]> Co-authored-by: Andrei Sandu <[email protected]>
-
- Sep 05, 2023
-
-
joe petrowski authored
* add common libs * asset hubs * add westend * bridge hubs * collectives * contracts * emulated tests * parachain bin * delete collectives constants and update docs * integration tests should have apache license (some missing, some needed changing) * propagate features * fmt
-
- Sep 01, 2023
-
-
Ignacio Palacios authored
* improve hygiene & clean up * improve hygiene & clean up - xcm-emulator * improve hygiene & clean up - common * improve hygiene & clean up - tests * improve hygiene & clean up - tests 2 * last hygiene bits * ".git/.scripts/commands/fmt/fmt.sh" --------- Co-authored-by: command-bot <>
-
- Aug 31, 2023
-
-
Bastian Köcher authored
* Rename `polkadot-parachain` to `polkadot-parachain-primitives` While doing this it also fixes some last `rustdoc` issues and fixes another Cargo warning related to `pallet-paged-list`. * Fix compilation * ".git/.scripts/commands/fmt/fmt.sh" * Fix XCM docs --------- Co-authored-by: command-bot <>
-
Alin Dima authored
* move min backing votes const to runtime also cache it per-session in the backing subsystem Signed-off-by: alindima <[email protected]> * add runtime migration * introduce api versioning for min_backing votes also enable it for rococo/versi for testing * also add min_backing_votes runtime calls to statement-distribution this dependency has been recently introduced by async backing * remove explicit version runtime API call this is not needed, as the RuntimeAPISubsystem already takes care of versioning and will return NotSupported if the version is not right. * address review comments - parametrise backing votes runtime API with session index - remove RuntimeInfo usage in backing subsystem, as runtime API caches the min backing votes by session index anyway. - move the logic for adjusting the configured needed backing votes with the size of the backing group to a primitives helper. - move the legacy min backing votes value to a primitives helper. - mark JoinMultiple error as fatal, since the Canceled (non-multiple) counterpart is also fatal. - make backing subsystem handle fatal errors for new leaves update. - add HostConfiguration consistency check for zeroed backing votes threshold - add cumulus accompanying change * fix cumulus test compilation * fix tests * more small fixes * fix merge * bump runtime api version for westend and rollback version for rococo --------- Signed-off-by: alindima <[email protected]> Co-authored-by: Javier Viola <[email protected]>
-
- Aug 30, 2023
-
-
Przemek Rzad authored
* Add missing Cumulus licenses * Typo * Add missing Substrate licenses * Single job checking the sub-repos in steps * Remove dates * Remove dates * Add missing (C) * Update FRAME UI tests Signed-off-by: Oliver Tale-Yazdi <[email protected]> * Update more UI tests Signed-off-by: Oliver Tale-Yazdi <[email protected]> --------- Signed-off-by: Oliver Tale-Yazdi <[email protected]> Co-authored-by: Oliver Tale-Yazdi <[email protected]>
-
- Aug 23, 2023
-
-
juangirini authored
* restructure macro related exports * restructure macro related exports * wip * wip * update cargo lock * refactor RuntimeDebug on unincluded segment * fmt * Companion: restructure `benchmarking` macro related exports (#3039) * wip * wip * restructure benchmarking macro related exports * add cargo lock --------- Co-authored-by: parity-processbot <>
-
- Aug 22, 2023
-
-
Adrian Catangiu authored
* add dummy BeefyId to emulated runtimes in integration tests * update lockfile for {"substrate", "polkadot"} --------- Co-authored-by: parity-processbot <>
-
- Aug 19, 2023
-
-
Patricio Napoli authored
* Changes for asset conversion in ksm * applied changes to forbid batch calls in xcm filters for ksm and wnd, fixed tests typing, cleaned up * updated weights for pallet_asset_conversion in ksm * updated swap_locally_on_chain_using_local_assets test * added more call filters, approval deposit fix * Update parachains/runtimes/assets/asset-hub-kusama/src/xcm_config.rs * Update tests to be like master * set metadata needed for the test. * Update parachains/runtimes/assets/asset-hub-kusama/src/lib.rs Co-authored-by: joe petrowski <[email protected]> * Update parachains/runtimes/assets/asset-hub-kusama/src/lib.rs Co-authored-by: joe petrowski <[email protected]> * removed hardcoded existential_deposit in local swap test * storage to const We're not planning on setting this via an on chain vote so let's have it as a const. * unneeded tests * const * shorter line * missed one * remove unused import * Update parachains/runtimes/assets/asset-hub-kusama/src/lib.rs Co-authored-by: Bastian Köcher <[email protected]> --------- Co-authored-by: joepetrowski <[email protected]> Co-authored-by: joe petrowski <[email protected]> Co-authored-by: Giles Cope <[email protected]> Co-authored-by: Bastian Köcher <[email protected]>
-
- Aug 18, 2023
-
-
Chris Sosnin authored
* Update substrate & polkadot * min changes to make async backing compile * (async backing) parachain-system: track limitations for unincluded blocks (#2438) * unincluded segment draft * read para head from storage proof * read_para_head -> read_included_para_head * Provide pub interface * add errors * fix unincluded segment update * BlockTracker -> Ancestor * add a dmp limit * Read para head depending on the storage switch * doc comments * storage items docs * add a sanity check on block initialize * Check watermark * append to the segment on block finalize * Move segment update into set_validation_data * Resolve para head todo * option watermark * fix comment * Drop dmq check * fix weight * doc-comments on inherent invariant * Remove TODO * add todo * primitives tests * pallet tests * doc comments * refactor unincluded segment length into a ConsensusHook (#2501) * refactor unincluded segment length into a ConsensusHook * add docs * refactor bandwidth_out calculation Co-authored-by: Chris Sosnin <[email protected]> * test for limits from impl * fmt * make tests compile * update comment * uncomment test * fix collator test by adding parent to state proof * patch HRMP watermark rules for unincluded segment * get consensus-common tests to pass, using unincluded segment * fix unincluded segment tests * get all tests passing * fmt * rustdoc CI * aura-ext: limit the number of authored blocks per slot (#2551) * aura_ext consensus hook * reverse dependency * include weight into hook * fix tests * remove stray println Co-authored-by: Chris Sosnin <[email protected]> * fix test warning * fix doc link --------- Co-authored-by: Chris Sosnin <[email protected]> Co-authored-by: Chris Sosnin <[email protected]> * parachain-system: ignore go ahead signal once upgrade is processed (#2594) * handle goahead signal for unincluded segment * doc comment * add test * parachain-system: drop processed messages from inherent data (#2590) * implement `drop_processed_messages` * drop messages based on relay parent number * adjust tests * drop changes to mqc * fix comment * drop test * drop more dead code * clippy * aura-ext: check slot in consensus hook and remove all `CheckInherents` logic (#2658) * aura-ext: check slot in consensus hook * convert relay chain slot * Make relay chain slot duration generic * use fixed velocity hook for pallets with aura * purge timestamp inherent * fix warning * adjust runtime tests * fix slots in tests * Make `xcm-emulator` test pass for new consensus hook (#2722) * add pallets on_initialize * tests pass * add AuraExt on_init * ".git/.scripts/commands/fmt/fmt.sh" --------- Co-authored-by: command-bot <> --------- Co-authored-by: Ignacio Palacios <[email protected]> * update polkadot git refs * CollationGenerationConfig closure is now optional (#2772) * CollationGenerationConfig closure is now optional * fix test * propagate network-protocol-staging feature (#2899) * Feature Flagging Consensus Hook Type Parameter (#2911) * First pass * fmt * Added as default feature in tomls * Changed to direct dependency feature * Dealing with clippy error * Update pallets/parachain-system/src/lib.rs Co-authored-by: asynchronous rob <[email protected]> --------- Co-authored-by: asynchronous rob <[email protected]> * fmt * bump deps and remove warning * parachain-system: update RelevantMessagingState according to the unincluded segment (#2948) * mostly address 2471 with a bug introduced * adjust relevant messaging state after computing total * fmt * max -> min * fix test implementation of xcmp source * add test * fix test message sending logic * fix + test * add more to unincluded segment test * fmt --------- Co-authored-by: Chris Sosnin <[email protected]> * Integrate new Aura / Parachain Consensus Logic in Parachain-Template / Polkadot-Parachain (#2864) * add a comment * refactor client/service utilities * deprecate start_collator * update parachain-template * update test-service in the same way * update polkadot-parachain crate * fmt * wire up new SubmitCollation message * some runtime utilities for implementing unincluded segment runtime APIs * allow parachains to configure their level of sybil-resistance when starting the network * make aura-ext compile * update to specify sybil resistance levels * fmt * specify relay chain slot duration in milliseconds * update Aura to explicitly produce Send futures also, make relay_chain_slot_duration a Duration * add authoring duration to basic collator and document params * integrate new basic collator into parachain-template * remove assert_send used for testing * basic-aura: only author when parent included * update polkadot-parachain-bin * fmt * some fixes * fixes * add a RelayNumberMonotonicallyIncreases * add a utility function for initializing subsystems * some logging for timestamp adjustment * fmt * some fixes for lookahead collator * add a log * update `find_potential_parents` to account for sessions * bound the loop * restore & deprecate old start_collator and start_full_node functions. * remove unnecessary await calls * fix warning * clippy * more clippy * remove unneeded logic * ci * update comment Co-authored-by: Marcin S. <[email protected]> * (async backing) restore `CheckInherents` for backwards-compatibility (#2977) * bring back timestamp * Restore CheckInherents * revert to empty CheckInherents * make CheckInherents optional * attempt * properly end system blocks * add some more comments * ignore failing system parachain tests * update refs after main feature branch merge * comment out the offending tests because CI runs ignored tests * fix warnings * fmt * revert to polkadot master * cargo update -p polkadot-primitives -p sp-io --------- Co-authored-by: asynchronous rob <[email protected]> Co-authored-by: Ignacio Palacios <[email protected]> Co-authored-by: Bradley Olson <[email protected]> Co-authored-by: Marcin S. <[email protected]> Co-authored-by: eskimor <[email protected]> Co-authored-by: Andronik <[email protected]>
-
Branislav Kontur authored
-
- Aug 10, 2023
-
-
Ignacio Palacios authored
* Allow functions to work over both parachains and relay chains * additional references * import * backup * refactoring para and relay traits * use runtime crates to build types * decouple ProcessMessage * decouple ProcessMessage 2 * dmp and xcmp handlers decouple * backup * refactor done * common int values working * added global ext with mutex * works for two mutex * single mutex and remove condvar * global test ext done * failing moving test_ext because relay block num * relay_block_number issue fixed * backup * Test working with assertions * assertions get Test as arg * DispatchArgs as generic * clean up * backup * teleports for asset-hub-kusama done * improve assert_expected_events macro * rename Test generics * check assertions for tuples * test assertions redone * reserve_transfer_assets done * send transact done * hrmp test for paras * hrmp channels test done * hrmp channels test done 2 * before modifying test dispatch * reserve tests done & Test dispatch fixed * reserve transfer local asset * force_create_and_mint_asset * force create and mint done * tests done * fix imports in common * common events refactored * add option to events attributes * asset-hub-polkadot tests done * asset-hub-westend half done * relay chain events move to common * remove failing send tests for asset-hub-westend * added events to bridge-hub-rococo * added events to collectives-polkadot * cargo clean up * fix asset-hub-westend tests * ".git/.scripts/commands/fmt/fmt.sh" * fix clippy * ".git/.scripts/commands/fmt/fmt.sh" * Removed unnecessary deps * Extracted some commonality for Kusama/Polkadot (which will be reused also for BridgeHubs) (#2971) * Extracted some commonality for Kusama/Polkadot (which will be reused also for BridgeHubs) * AssetHubRococo should better use AssetHubKusama runtime * add fund_account --------- Co-authored-by: NachoPal <[email protected]> * address comments * rename event assertion helpers * clean comments * address comments 2 * ".git/.scripts/commands/fmt/fmt.sh" --------- Co-authored-by: Giles Cope <[email protected]> Co-authored-by: command-bot <> Co-authored-by: Branislav Kontur <[email protected]>
-
- Aug 02, 2023
-
-
Dmitry Markin authored
* Init `PeerStore` in `build_collator_network` * kick CI * Update Cargo.lock for substrate * Companion for substrate 14373 * Companion for paritytech/substrate#14020 * update lockfile for {"substrate", "polkadot"} --------- Co-authored-by: Davide Galassi <[email protected]> Co-authored-by: parity-processbot <>
-
- Jul 24, 2023
-
-
Branislav Kontur authored
* Correct BH readme * Zombienet renaming * TOC * Apply suggestions from code review Co-authored-by: Adrian Catangiu <[email protected]> * Updated REAMDE.md * Alice -> Bob for e2e --------- Co-authored-by: Adrian Catangiu <[email protected]> Co-authored-by: parity-processbot <>
-
- Jul 21, 2023
-
-
Branislav Kontur authored
* [asset-conv] Unused Balances type * [asset-conv] native asset change * Dedicated `AssetBalance` type for `pallet_assets` instances * Improved local vs foreign asset handling + test for not allowing pool_assets in pool * Removed `into_multiasset_id` * Fix * Refactor * Fixed create_pool for benchmark with LocalAndForeignAssets (finally found it) * ".git/.scripts/commands/fmt/fmt.sh" * Revert * fmt * Migrates pools with `MultiLocation { parents: 0, interior: Here }` to `MultiLocation { parents: 1, interior: Here }` * Allow `set_storage` for `AllowMultiAssetPools` / `LiquidityWithdrawalFee` * Benchmarks work * Removed comment + more defensive migration * `T::Currency::transfer` -> `Balances::transfer_all` in migration * Change pool_id in migration * Update parachains/runtimes/assets/asset-hub-westend/src/lib.rs * Bump substrate (manually) * Bump polkadot * Fixes from polkadot + clippy * Fix for xcm-emulator tests (thank you Nacho) --------- Co-authored-by: command-bot <> Co-authored-by: Jegor Sidorenko <[email protected]>
-
- Jul 12, 2023
-
-
Michal Kucharczyk authored
* GenesisBuild<T,I> deprecated. BuildGenesisConfig added * ".git/.scripts/commands/fmt/fmt.sh" * integration-tests/emulated: ..Default::default added to genesis configs * Cargo.lock updated * Cargo.lock updated * update lockfile for {"polkadot", "substrate"} * clippy fixes * clippy fixes * clippy fixes again --------- Co-authored-by: command-bot <>
-
- Jul 05, 2023
-
-
Ignacio Palacios authored
* rename bridge hub + BridgeMessages type * bridge base * bridge string approach * add decl_test_bridges macro * outbound lanes on the way * get & dispatch mock bridge done * fix bridge errors + log::debug for messages * clean up * update source OutboundLaneData * rococo & wococo added * sender_receiver_accounts_parameter_types macro * sender_receiver_accounts_parameter_types macro 2 * fixed multi parachain + example on the way * working but router error * bridge working * refactor NetworkComponent * make it generic * working as generic * clean up * last bit * ".git/.scripts/commands/fmt/fmt.sh" * fix bridge hub handler name * ".git/.scripts/commands/fmt/fmt.sh" * add AssetConversion back for AssetHubWestend * Update xcm/xcm-emulator/src/lib.rs Co-authored-by: Squirrel <[email protected]> * add LaneId wrapper * update substrate * fix wrapper conversion * remove duplicate in workspace * Revert "update substrate" This reverts commit 92e8f201ae433aed3f70b998ebd4c23d9168d0ee. * ".git/.scripts/commands/fmt/fmt.sh" --------- Co-authored-by: command-bot <> Co-authored-by: Squirrel <[email protected]>
-
- Jun 23, 2023
-
-
Squirrel authored
* Dex and payment by dex in westmint * Wrap U256 type for now (to support required traits.) * cargo fmt * We can now use U256 * Rename PromotedBalance * name change * Updating the code to master. TODO: handle dust! * cargo fmt * Minimising changes and step towards getting benchmarks compiling (still a From<u32> bound in the pallet) * minimise diff * Update parachains/runtimes/assets/westmint/src/lib.rs Co-authored-by: Jegor Sidorenko <[email protected]> * Update parachains/runtimes/assets/westmint/src/lib.rs Co-authored-by: Jegor Sidorenko <[email protected]> * Update parachains/common/src/impls.rs Co-authored-by: Jegor Sidorenko <[email protected]> * Fix benchmark build * Add in AssetConversionAPI * Handle dust * cargo fmt * Don't need to be explicit that it's AccountId32 * remove pool setup fee (Asset deposit fees are a sufficient anti-spam measure) * More natural way to specify native * cargo fmt * Update parachains/runtimes/assets/westmint/src/lib.rs * Additional required impls * either form of multilocation should be acceptable. * add call filter exclusion * Fix typo & try_convert now fails if native is converted * merge master fixup * Fix: HoldReason should be there. * Box MultiAssetId Otherwise it blows out the Call enum memory size. * cargo fmt * update lock file * add std feature, update lock file * need to turn on std on common * adding in westmint tests * WeightToFee must be from the destination chain. * cargo fmt * account for higher ED on westmint * type removed as not used * cargo fmt * remove unused import * minimising diff * import needed only with feature enabled * use multilocation contains * move the impls to separate file * simplify on conversion * simplify on reverse conversion also. * rename var * clippy * removed dead code * cargo fmt * Use pay by swap * review suggestions * cargo fmt * Update parachains/runtimes/assets/asset-hub-westend/src/lib.rs Co-authored-by: joe petrowski <[email protected]> * add benchmarks for new assets pallet * revert common/src changes * need a concrete id * more fixes * lock --------- Co-authored-by: Jegor Sidorenko <[email protected]> Co-authored-by: joepetrowski <[email protected]> Co-authored-by: joe petrowski <[email protected]>
-
- Jun 16, 2023
-
-
juangirini authored
* update genesis config * rebase and fix errors --------- Co-authored-by: parity-processbot <> Co-authored-by: joepetrowski <[email protected]>
-
- Jun 12, 2023
-
-
https://github.com/paritytech/polkadot/pull/7341eskimor authored
* Companion to enabling past session slashing on production. * update lockfile for {"substrate", "polkadot"} --------- Co-authored-by: eskimor <[email protected]> Co-authored-by: parity-processbot <>
-