Commits · 3380e21cd92690c2066f686164a954ba7cd17244 · parity / Mirrored projects / polkadot-sdk

Apr 09, 2024

Move cumulus zombienet tests to aura & async backing (#3568) · df818d29

Sebastian Kunert authored Apr 09, 2024

Cumulus test-parachain node and test runtime were still using relay
chain consensus and 12s blocktimes. With async backing around the corner
on the major chains we should switch our tests too.

Also needed to nicely test the changes coming to collators in #3168.

### Changes Overview
- Followed the [migration
guide](https://wiki.polkadot.network/docs/maintain-guides-async-backing)
for async backing for the cumulus-test-runtime
- Adjusted the cumulus-test-service to use the correct import-queue,
lookahead collator etc.
- The block validation function now uses the Aura Ext Executor so that
the seal of the block is validated
- Previous point requires that we seal block before calling into
`validate_block`, I introduced a helper function for that
- Test client adjusted to provide a slot to the relay chain proof and
the aura pre-digest

df818d29

Apr 08, 2024

Integrate litep2p into Polkadot SDK (#2944) · 80616f6d

Aaro Altonen authored Apr 08, 2024

[litep2p](https://github.com/altonen/litep2p) is a libp2p-compatible P2P
networking library. It supports all of the features of `rust-libp2p`
that are currently being utilized by Polkadot SDK.

Compared to `rust-libp2p`, `litep2p` has a quite different architecture
which is why the new `litep2p` network backend is only able to use a
little of the existing code in `sc-network`. The design has been mainly
influenced by how we'd wish to structure our networking-related code in
Polkadot SDK: independent higher-levels protocols directly communicating
with the network over links that support bidirectional backpressure. A
good example would be `NotificationHandle`/`RequestResponseHandle`
abstractions which allow, e.g., `SyncingEngine` to directly communicate
with peers to announce/request blocks.

I've tried running `polkadot --network-backend litep2p` with a few
different peer configurations and there is a noticeable reduction in
networking CPU usage. For high load (`...

80616f6d

Apr 04, 2024

`GenesisConfig` presets for runtime (#2714) · f910a15c

Michal Kucharczyk authored Apr 04, 2024

The runtime now can provide a number of predefined presets of
`RuntimeGenesisConfig` struct. This presets are intended to be used in
different deployments, e.g.: `local`, `staging`, etc, and should be
included into the corresponding chain-specs.

Having `GenesisConfig` presets in runtime allows to fully decouple node
from runtime types (the problem is described in #1984).

**Summary of changes:**
- The `GenesisBuilder` API was adjusted to enable this functionality
(and provide better naming - #150):
   ```rust
    fn preset_names() -> Vec<PresetId>;
fn get_preset(id: Option<PresetId>) -> Option<serde_json::Value>;
//`None` means default
    fn build_state(value: serde_json::Value);
    pub struct PresetId(Vec<u8>);
   ```

- **Breaking change**: Old `create_default_config` method was removed,
`build_config` was renamed to `build_state`. As a consequence a node
won't be able to interact with genesis config for older runtimes. The
cleanup was made for sake of API simplicity. Also IMO maintaining
compatibility with old API is not so crucial.
- Reference implementation was provided for `substrate-test-runtime` and
`rococo` runtimes. For rococo new
[`genesis_configs_presets`](https://github.com/paritytech/polkadot-sdk/blob/3b41d66b/polkadot/runtime/rococo/src/genesis_config_presets.rs#L530)
module was added and is used in `GenesisBuilder`
[_presets-related_](https://github.com/paritytech/polkadot-sdk/blob/3b41d66b/polkadot/runtime/rococo/src/lib.rs#L2462-L2485)
methods.

- The `chain-spec-builder` util was also improved and allows to
([_doc_](https://github.com/paritytech/polkadot-sdk/blob/3b41d66b/substrate/bin/utils/chain-spec-builder/src/lib.rs#L19)):
   - list presets provided by given runtime (`list-presets`),
- display preset or default config provided by the runtime
(`display-preset`),
   - build chain-spec using named preset (`create ... named-preset`),


- The `ChainSpecBuilder` is extended with
[`with_genesis_config_preset_name`](https://github.com/paritytech/polkadot-sdk/blob/3b41d66b/substrate/client/chain-spec/src/chain_spec.rs#L447)
method which allows to build chain-spec using named preset provided by
the runtime. Sample usage on the node side
[here](https://github.com/paritytech/polkadot-sdk/blob/2caffaae

/polkadot/node/service/src/chain_spec.rs#L404).

Implementation of #1984.
fixes: #150
part of: #25

---------

Co-authored-by: Sebastian Kunert <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

f910a15c

Migrate fee payment from `Currency` to `fungible` (#2292) · bda4e75a

Liam Aharon authored Apr 05, 2024

Part of https://github.com/paritytech/polkadot-sdk/issues/226 
Related https://github.com/paritytech/polkadot-sdk/issues/1833

- Deprecate `CurrencyAdapter` and introduce `FungibleAdapter`
- Deprecate `ToStakingPot` and replace usage with `ResolveTo`
- Required creating a new `StakingPotAccountId` struct that implements
`TypedGet` for the staking pot account ID
- Update parachain common utils `DealWithFees`, `ToAuthor` and
`AssetsToBlockAuthor` implementations to use `fungible`
- Update runtime XCM Weight Traders to use `ResolveTo` instead of
`ToStakingPot`
- Update runtime Transaction Payment pallets to use `FungibleAdapter`
instead of `CurrencyAdapter`
- [x] Blocked by https://github.com/paritytech/polkadot-sdk/pull/1296,
needs the `Unbalanced::decrease_balance` fix

bda4e75a

Fix Mermaid diagram rendering (#3875) · 0ef37c75

Liam Aharon authored Apr 04, 2024



Closes https://github.com/paritytech/polkadot-sdk/issues/2977

The issue appears to stem from the `aquamarine` crate failing to render
diagrams in re-exported crates.

e.g. as raised
[here](https://github.com/paritytech/polkadot-sdk/issues/2977), diagrams
would render at `frame_support::traits::Hooks` but not the re-exported
doc `frame::traits::Hooks`, even if I added `aquamarine` as a `frame`
crate dependency.

To resolve this, I followed advice in
https://github.com/mersinvald/aquamarine/issues/20 to instead render
mermaid diagrams directly using JS by adding an `after-content.js`.

---

Also fixes compile warnings, enables `--all-features` and disallows
future warnings in CI.

---------

Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

0ef37c75

Apr 02, 2024

Align dependencies with `parity-bridges-common` (#3937) · 8e95a3e1

Serban Iorga authored Apr 02, 2024

Working towards migrating the `parity-bridges-common` repo inside
`polkadot-sdk`. This PR upgrades some dependencies in order to align
them with the versions used in `parity-bridges-common`

Related to
https://github.com/paritytech/parity-bridges-common/issues/2538

8e95a3e1

Apr 01, 2024

`im-online` removal final cleanup (#3902) · 52e10378

s0me0ne-unkn0wn authored Apr 01, 2024

Rejoice! Rejoice! The story is nearly over.

This PR removes stale migrations, auxiliary structures, and package
dependencies, thus making Rococo and Westend totally free from any
`im-online`-related stuff.

`im-online` still stays a part of the Substrate node and its runtime:
https://github.com/paritytech/polkadot-sdk/blob/0d932484/substrate/bin/node/runtime/src/lib.rs#L2276-L2277
I'm not sure if it makes sense to remove it from there considering that
we're not removing `im-online` from FRAME. Please share your opinion.

52e10378

Mar 26, 2024

Fix spelling mistakes across the whole repository (#3808) · 002d9260

Dcompoze authored Mar 26, 2024

**Update:** Pushed additional changes based on the review comments.

**This pull request fixes various spelling mistakes in this
repository.**

Most of the changes are contained in the first **3** commits:

- `Fix spelling mistakes in comments and docs`

- `Fix spelling mistakes in test names`

- `Fix spelling mistakes in error messages, panic messages, logs and
tracing`

Other source code spelling mistakes are separated into individual
commits for easier reviewing:

- `Fix the spelling of 'authority'`

- `Fix the spelling of 'REASONABLE_HEADERS_IN_JUSTIFICATION_ANCESTRY'`

- `Fix the spelling of 'prev_enqueud_messages'`

- `Fix the spelling of 'endpoint'`

- `Fix the spelling of 'children'`

- `Fix the spelling of 'PenpalSiblingSovereignAccount'`

- `Fix the spelling of 'PenpalSudoAccount'`

- `Fix the spelling of 'insufficient'`

- `Fix the spelling of 'PalletXcmExtrinsicsBenchmark'`

- `Fix the spelling of 'subtracted'`

- `Fix the spelling of 'CandidatePendingAvailability'`

- `Fix the spelling of 'exclusive'`

- `Fix the spelling of 'until'`

- `Fix the spelling of 'discriminator'`

- `Fix the spelling of 'nonexistent'`

- `Fix the spelling of 'subsystem'`

- `Fix the spelling of 'indices'`

- `Fix the spelling of 'committed'`

- `Fix the spelling of 'topology'`

- `Fix the spelling of 'response'`

- `Fix the spelling of 'beneficiary'`

- `Fix the spelling of 'formatted'`

- `Fix the spelling of 'UNKNOWN_PROOF_REQUEST'`

- `Fix the spelling of 'succeeded'`

- `Fix the spelling of 'reopened'`

- `Fix the spelling of 'proposer'`

- `Fix the spelling of 'InstantiationNonce'`

- `Fix the spelling of 'depositor'`

- `Fix the spelling of 'expiration'`

- `Fix the spelling of 'phantom'`

- `Fix the spelling of 'AggregatedKeyValue'`

- `Fix the spelling of 'randomness'`

- `Fix the spelling of 'defendant'`

- `Fix the spelling of 'AquaticMammal'`

- `Fix the spelling of 'transactions'`

- `Fix the spelling of 'PassingTracingSubscriber'`

- `Fix the spelling of 'TxSignaturePayload'`

- `Fix the spelling of 'versioning'`

- `Fix the spelling of 'descendant'`

- `Fix the spelling of 'overridden'`

- `Fix the spelling of 'network'`

Let me know if this structure is adequate.

**Note:** The usage of the words `Merkle`, `Merkelize`, `Merklization`,
`Merkelization`, `Merkleization`, is somewhat inconsistent but I left it
as it is.

~~**Note:** In some places the term `Receival` is used to refer to
message reception, IMO `Reception` is the correct word here, but I left
it as it is.~~

~~**Note:** In some places the term `Overlayed` is used instead of the
more acceptable version `Overlaid` but I also left it as it is.~~

~~**Note:** In some places the term `Applyable` is used instead of the
correct version `Applicable` but I also left it as it is.~~

**Note:** Some usage of British vs American english e.g. `judgement` vs
`judgment`, `initialise` vs `initialize`, `optimise` vs `optimize` etc.
are both present in different places, but I suppose that's
understandable given the number of contributors.

~~**Note:** There is a spelling mistake in `.github/CODEOWNERS` but it
triggers errors in CI when I make changes to it, so I left it as it
is.~~

002d9260

Mar 17, 2024

Bump the known_good_semver group with 3 updates (#3717) · fe343cc7

dependabot[bot] authored Mar 17, 2024



Bumps the known_good_semver group with 3 updates:
[log](https://github.com/rust-lang/log),
[syn](https://github.com/dtolnay/syn) and
[clap](https://github.com/clap-rs/clap).

Updates `log` from 0.4.20 to 0.4.21
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/rust-lang/log/blob/master/CHANGELOG.md">log's
changelog</a>.</em></p>
<blockquote>
<h2>[0.4.21] - 2024-02-27</h2>
<h2>What's Changed</h2>
<ul>
<li>Minor clippy nits by <a
href="https://github.com/nyurik"><code>@nyurik</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/578">rust-lang/log#578</a></li>
<li>Simplify Display impl by <a
href="https://github.com/nyurik"><code>@nyurik</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/579">rust-lang/log#579</a></li>
<li>Set all crates to 2021 edition by <a
href="https://github.com/nyurik"><code>@nyurik</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/580">rust-lang/log#580</a></li>
<li>Various changes based on review by <a
href="https://github.com/Thomasdezeeuw"><code>@Thomasdezeeuw</code></a>
in <a
href="https://redirect.github.com/rust-lang/log/pull/583">rust-lang/log#583</a></li>
<li>Fix typo in file_static() method doc by <a
href="https://github.com/dimo414"><code>@dimo414</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/590">rust-lang/log#590</a></li>
<li>Specialize empty key value pairs by <a
href="https://github.com/EFanZh"><code>@EFanZh</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/576">rust-lang/log#576</a></li>
<li>Fix incorrect lifetime in Value::to_str() by <a
href="https://github.com/peterjoel"><code>@peterjoel</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/587">rust-lang/log#587</a></li>
<li>Remove some API of the key-value feature by <a
href="https://github.com/Thomasdezeeuw"><code>@Thomasdezeeuw</code></a>
in <a
href="https://redirect.github.com/rust-lang/log/pull/585">rust-lang/log#585</a></li>
<li>Add logcontrol-log and log-reload by <a
href="https://github.com/swsnr"><code>@swsnr</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/595">rust-lang/log#595</a></li>
<li>Add Serialization section to kv::Value docs by <a
href="https://github.com/Thomasdezeeuw"><code>@Thomasdezeeuw</code></a>
in <a
href="https://redirect.github.com/rust-lang/log/pull/593">rust-lang/log#593</a></li>
<li>Rename Value::to_str to to_cow_str by <a
href="https://github.com/Thomasdezeeuw"><code>@Thomasdezeeuw</code></a>
in <a
href="https://redirect.github.com/rust-lang/log/pull/592">rust-lang/log#592</a></li>
<li>Clarify documentation and simplify initialization of
<code>STATIC_MAX_LEVEL</code> by <a
href="https://github.com/ptosi"><code>@ptosi</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/594">rust-lang/log#594</a></li>
<li>Update docs to 2021 edition, test by <a
href="https://github.com/nyurik"><code>@nyurik</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/577">rust-lang/log#577</a></li>
<li>Add &quot;alterable_logger&quot; link to README.md by <a
href="https://github.com/brummer-simon"><code>@brummer-simon</code></a>
in <a
href="https://redirect.github.com/rust-lang/log/pull/589">rust-lang/log#589</a></li>
<li>Normalize line ending by <a
href="https://github.com/EFanZh"><code>@EFanZh</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/602">rust-lang/log#602</a></li>
<li>Remove <code>ok_or</code> in favor of <code>Option::ok_or</code> by
<a
href="https://github.com/AngelicosPhosphoros"><code>@AngelicosPhosphoros</code></a>
in <a
href="https://redirect.github.com/rust-lang/log/pull/607">rust-lang/log#607</a></li>
<li>Use <code>Acquire</code> ordering for initialization check by <a
href="https://github.com/AngelicosPhosphoros"><code>@AngelicosPhosphoros</code></a>
in <a
href="https://redirect.github.com/rust-lang/log/pull/610">rust-lang/log#610</a></li>
<li>Get structured logging API ready for stabilization by <a
href="https://github.com/KodrAus"><code>@KodrAus</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/613">rust-lang/log#613</a></li>
</ul>
<h2>New Contributors</h2>
<ul>
<li><a href="https://github.com/nyurik"><code>@nyurik</code></a> made
their first contribution in <a
href="https://redirect.github.com/rust-lang/log/pull/578">rust-lang/log#578</a></li>
<li><a href="https://github.com/dimo414"><code>@dimo414</code></a> made
their first contribution in <a
href="https://redirect.github.com/rust-lang/log/pull/590">rust-lang/log#590</a></li>
<li><a href="https://github.com/peterjoel"><code>@peterjoel</code></a>
made their first contribution in <a
href="https://redirect.github.com/rust-lang/log/pull/587">rust-lang/log#587</a></li>
<li><a href="https://github.com/ptosi"><code>@ptosi</code></a> made
their first contribution in <a
href="https://redirect.github.com/rust-lang/log/pull/594">rust-lang/log#594</a></li>
<li><a
href="https://github.com/brummer-simon"><code>@brummer-simon</code></a>
made their first contribution in <a
href="https://redirect.github.com/rust-lang/log/pull/589">rust-lang/log#589</a></li>
<li><a
href="https://github.com/AngelicosPhosphoros"><code>@AngelicosPhosphoros</code></a>
made their first contribution in <a
href="https://redirect.github.com/rust-lang/log/pull/607">rust-lang/log#607</a></li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/rust-lang/log/commit/3ccdc286fef3076747fe18a2a93658ea4d4ae012"><code>3ccdc28</code></a>
Merge pull request <a
href="https://redirect.github.com/rust-lang/log/issues/617">#617</a>
from rust-lang/cargo/0.4.21</li>
<li><a
href="https://github.com/rust-lang/log/commit/6153cb289f0e7b80f00ae07dbe5ee41cf3d3fcb0"><code>6153cb2</code></a>
prepare for 0.4.21 release</li>
<li><a
href="https://github.com/rust-lang/log/commit/f0f74946a4bfb02cfc407795a3499c4b69d7a290"><code>f0f7494</code></a>
Merge pull request <a
href="https://redirect.github.com/rust-lang/log/issues/613">#613</a>
from rust-lang/feat/kv-cleanup</li>
<li><a
href="https://github.com/rust-lang/log/commit/2b220bf3b705f2abc0ee591c7eb17972a979da3a"><code>2b220bf</code></a>
clean up structured logging example</li>
<li><a
href="https://github.com/rust-lang/log/commit/646e9ab9917fb79e44b6b36b8375106a1a09766c"><code>646e9ab</code></a>
use original Visitor name for VisitValue</li>
<li><a
href="https://github.com/rust-lang/log/commit/cf85c38d3519745d60e7b891c4b2025050a8389f"><code>cf85c38</code></a>
add needed subfeatures to kv_unstable</li>
<li><a
href="https://github.com/rust-lang/log/commit/73e953905b970ef765a86bf6cbd69bc2c5e2bac4"><code>73e9539</code></a>
fix up capturing of :err</li>
<li><a
href="https://github.com/rust-lang/log/commit/31bb4b0ff36e458c6bef304a336b71f6342ddcc7"><code>31bb4b0</code></a>
move error macros together</li>
<li><a
href="https://github.com/rust-lang/log/commit/ad917118a5e781d0dd60b3a75ba519ce9839ba70"><code>ad91711</code></a>
support field shorthand in macros</li>
<li><a
href="https://github.com/rust-lang/log/commit/90a347bd836873264a393a35bfd90fe478fadae2"><code>90a347b</code></a>
restore removed APIs as deprecated</li>
<li>Additional commits viewable in <a
href="https://github.com/rust-lang/log/compare/0.4.20...0.4.21">compare
view</a></li>
</ul>
</details>
<br />

Updates `syn` from 2.0.50 to 2.0.52
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/syn/releases">syn's
releases</a>.</em></p>
<blockquote>
<h2>2.0.52</h2>
<ul>
<li>Add an expression parser that uses match-arm's boundary rules (<a
href="https://redirect.github.com/dtolnay/syn/issues/1593">#1593</a>)</li>
</ul>
<h2>2.0.51</h2>
<ul>
<li>Resolve non_local_definitions warnings in generated code under rustc
1.78-nightly</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/syn/commit/07ede6a6b31adeb3a18899ada1f352f63b3a36b9"><code>07ede6a</code></a>
Release 2.0.52</li>
<li><a
href="https://github.com/dtolnay/syn/commit/acbcfbc8c113fa1603469c9ad329d061ee74662e"><code>acbcfbc</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1593">#1593</a>
from dtolnay/boundary</li>
<li><a
href="https://github.com/dtolnay/syn/commit/4924a993dce23abe65128ac318dd662d1e2ceef2"><code>4924a99</code></a>
Add an expression parser that uses match-arm's boundary rules</li>
<li><a
href="https://github.com/dtolnay/syn/commit/e06122bf2cfd31bd7f70304694477dd292fe7e1e"><code>e06122b</code></a>
Resolve unnecessary_get_then_check clippy lint</li>
<li><a
href="https://github.com/dtolnay/syn/commit/018fc5a6298491525387910cb359a9ec618abe54"><code>018fc5a</code></a>
Update test suite to nightly-2024-02-27</li>
<li><a
href="https://github.com/dtolnay/syn/commit/5e15a9b412cb1e2df481e3470e1be8defaee4495"><code>5e15a9b</code></a>
Release 2.0.51</li>
<li><a
href="https://github.com/dtolnay/syn/commit/7e0d4e1f43a879078595f0a3876484a1920ab8f8"><code>7e0d4e1</code></a>
Resolve non_local_definitions warning in debug impls</li>
<li><a
href="https://github.com/dtolnay/syn/commit/8667ad97c1d4e75ac1bb323fb5c7849269814145"><code>8667ad9</code></a>
Ignore module_name_repetitions pedantic clippy lint in codegen</li>
<li><a
href="https://github.com/dtolnay/syn/commit/1fc32000e25bf8fda7371071073f91e012ddf808"><code>1fc3200</code></a>
Update test suite to nightly-2024-02-26</li>
<li><a
href="https://github.com/dtolnay/syn/commit/07a2065576b27dcf0c104f56379cc446d2f3824b"><code>07a2065</code></a>
Update test suite to nightly-2024-02-23</li>
<li>See full diff in <a
href="https://github.com/dtolnay/syn/compare/2.0.50...2.0.52">compare
view</a></li>
</ul>
</details>
<br />

Updates `clap` from 4.5.1 to 4.5.3
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/releases">clap's
releases</a>.</em></p>
<blockquote>
<h2>v4.5.3</h2>
<h2>[4.5.3] - 2024-03-15</h2>
<h3>Internal</h3>
<ul>
<li><em>(derive)</em> Update <code>heck</code></li>
</ul>
<h2>v4.5.2</h2>
<h2>[4.5.2] - 2024-03-06</h2>
<h3>Fixes</h3>
<ul>
<li><em>(macros)</em> Silence a warning</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.5.3] - 2024-03-15</h2>
<h3>Internal</h3>
<ul>
<li><em>(derive)</em> Update <code>heck</code></li>
</ul>
<h2>[4.5.2] - 2024-03-06</h2>
<h3>Fixes</h3>
<ul>
<li><em>(macros)</em> Silence a warning</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/4e07b438584bb8a19e37599d4c5b11797bec5579"><code>4e07b43</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/8247c7ddf05d8023729ac180d8e8df260f1da5ff"><code>8247c7d</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/677c52ce0870115845a4c42e204f6c049b81a1e7"><code>677c52c</code></a>
chore: Update <code>heck</code> requirement (<a
href="https://redirect.github.com/clap-rs/clap/issues/5396">#5396</a>)</li>
<li><a
href="https://github.com/clap-rs/clap/commit/f65d421607ba16c3175ffe76a20820f123b6c4cb"><code>f65d421</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/886b2729e419114bf42f1a92c66d346c81aa8f33"><code>886b272</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/3ba429752fdb19b7a1c2e151c41d5141ad5b9295"><code>3ba4297</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5386">#5386</a>
from amaanq/static-var-name</li>
<li><a
href="https://github.com/clap-rs/clap/commit/2aea9504c4894b3bddf9cd4d2d6cba889307c157"><code>2aea950</code></a>
fix: Use SCREAMING_SNAKE_CASE for static variable
<code>authors</code></li>
<li><a
href="https://github.com/clap-rs/clap/commit/690f5557d7f25904c31ec9f2a3c3657cbb68c98e"><code>690f555</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5382">#5382</a>
from clap-rs/renovate/pre-commit-action-3.x</li>
<li><a
href="https://github.com/clap-rs/clap/commit/a2aa644368ec19026b16b870ec32dc57b325ba9b"><code>a2aa644</code></a>
chore(deps): update compatible (dev) (<a
href="https://redirect.github.com/clap-rs/clap/issues/5381">#5381</a>)</li>
<li><a
href="https://github.com/clap-rs/clap/commit/c233de53c0cca4281f444cf16d16d161bc9c3cab"><code>c233de5</code></a>
chore(deps): update pre-commit/action action to v3.0.1</li>
<li>Additional commits viewable in <a
href="https://github.com/clap-rs/clap/compare/clap_complete-v4.5.1...v4.5.3">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

fe343cc7

Mar 15, 2024

Removes `as [disambiguation_path]` from `derive_impl` usage (#3652) · 7099f6e1

gupnik authored Mar 15, 2024

Step in https://github.com/paritytech/polkadot-sdk/issues/171

This PR removes `as [disambiguation_path]` syntax from `derive_impl`
usage across the polkadot-sdk as introduced in
https://github.com/paritytech/polkadot-sdk/pull/3505

7099f6e1

Mar 13, 2024

Revert "FRAME: Create `TransactionExtension` as a replacement for... · bbd51ce8

georgepisaltu authored Mar 13, 2024


Revert "FRAME: Create `TransactionExtension` as a replacement for `SignedExtension` (#2280)" (#3665)

This PR reverts #2280 which introduced `TransactionExtension` to replace
`SignedExtension`.

As a result of the discussion
[here](https://github.com/paritytech/polkadot-sdk/pull/3623#issuecomment-1986789700),
the changes will be reverted for now with plans to reintroduce the
concept in the future.

---------

Signed-off-by: georgepisaltu <[email protected]>

bbd51ce8

Mar 04, 2024

FRAME: Create `TransactionExtension` as a replacement for `SignedExtension` (#2280) · fd5f9292

Gavin Wood authored Mar 04, 2024



Closes #2160

First part of [Extrinsic
Horizon](https://github.com/paritytech/polkadot-sdk/issues/2415)

Introduces a new trait `TransactionExtension` to replace
`SignedExtension`. Introduce the idea of transactions which obey the
runtime's extensions and have according Extension data (né Extra data)
yet do not have hard-coded signatures.

Deprecate the terminology of "Unsigned" when used for
transactions/extrinsics owing to there now being "proper" unsigned
transactions which obey the extension framework and "old-style" unsigned
which do not. Instead we have __*General*__ for the former and
__*Bare*__ for the latter. (Ultimately, the latter will be phased out as
a type of transaction, and Bare will only be used for Inherents.)

Types of extrinsic are now therefore:
- Bare (no hardcoded signature, no Extra data; used to be known as
"Unsigned")
- Bare transactions (deprecated): Gossiped, validated with
`ValidateUnsigned` (deprecated) and the `_bare_compat` bits of
`TransactionExtension` (deprecated).
  - Inherents: Not gossiped, validated with `ProvideInherent`.
- Extended (Extra data): Gossiped, validated via `TransactionExtension`.
  - Signed transactions (with a hardcoded signature).
  - General transactions (without a hardcoded signature).

`TransactionExtension` differs from `SignedExtension` because:
- A signature on the underlying transaction may validly not be present.
- It may alter the origin during validation.
- `pre_dispatch` is renamed to `prepare` and need not contain the checks
present in `validate`.
- `validate` and `prepare` is passed an `Origin` rather than a
`AccountId`.
- `validate` may pass arbitrary information into `prepare` via a new
user-specifiable type `Val`.
- `AdditionalSigned`/`additional_signed` is renamed to
`Implicit`/`implicit`. It is encoded *for the entire transaction* and
passed in to each extension as a new argument to `validate`. This
facilitates the ability of extensions to acts as underlying crypto.

There is a new `DispatchTransaction` trait which contains only default
function impls and is impl'ed for any `TransactionExtension` impler. It
provides several utility functions which reduce some of the tedium from
using `TransactionExtension` (indeed, none of its regular functions
should now need to be called directly).

Three transaction version discriminator ("versions") are now
permissible:
- 0b000000100: Bare (used to be called "Unsigned"): contains Signature
or Extra (extension data). After bare transactions are no longer
supported, this will strictly identify an Inherents only.
- 0b100000100: Old-school "Signed" Transaction: contains Signature and
Extra (extension data).
- 0b010000100: New-school "General" Transaction: contains Extra
(extension data), but no Signature.

For the New-school General Transaction, it becomes trivial for authors
to publish extensions to the mechanism for authorizing an Origin, e.g.
through new kinds of key-signing schemes, ZK proofs, pallet state,
mutations over pre-authenticated origins or any combination of the
above.

## Code Migration

### NOW: Getting it to build

Wrap your `SignedExtension`s in `AsTransactionExtension`. This should be
accompanied by renaming your aggregate type in line with the new
terminology. E.g. Before:

```rust
/// The SignedExtension to the basic transaction logic.
pub type SignedExtra = (
	/* snip */
	MySpecialSignedExtension,
);
/// Unchecked extrinsic type as expected by this runtime.
pub type UncheckedExtrinsic =
	generic::UncheckedExtrinsic<Address, RuntimeCall, Signature, SignedExtra>;
```

After:

```rust
/// The extension to the basic transaction logic.
pub type TxExtension = (
	/* snip */
	AsTransactionExtension<MySpecialSignedExtension>,
);
/// Unchecked extrinsic type as expected by this runtime.
pub type UncheckedExtrinsic =
	generic::UncheckedExtrinsic<Address, RuntimeCall, Signature, TxExtension>;
```

You'll also need to alter any transaction building logic to add a
`.into()` to make the conversion happen. E.g. Before:

```rust
fn construct_extrinsic(
		/* snip */
) -> UncheckedExtrinsic {
	let extra: SignedExtra = (
		/* snip */
		MySpecialSignedExtension::new(/* snip */),
	);
	let payload = SignedPayload::new(call.clone(), extra.clone()).unwrap();
	let signature = payload.using_encoded(|e| sender.sign(e));
	UncheckedExtrinsic::new_signed(
		/* snip */
		Signature::Sr25519(signature),
		extra,
	)
}
```

After:

```rust
fn construct_extrinsic(
		/* snip */
) -> UncheckedExtrinsic {
	let tx_ext: TxExtension = (
		/* snip */
		MySpecialSignedExtension::new(/* snip */).into(),
	);
	let payload = SignedPayload::new(call.clone(), tx_ext.clone()).unwrap();
	let signature = payload.using_encoded(|e| sender.sign(e));
	UncheckedExtrinsic::new_signed(
		/* snip */
		Signature::Sr25519(signature),
		tx_ext,
	)
}
```

### SOON: Migrating to `TransactionExtension`

Most `SignedExtension`s can be trivially converted to become a
`TransactionExtension`. There are a few things to know.

- Instead of a single trait like `SignedExtension`, you should now
implement two traits individually: `TransactionExtensionBase` and
`TransactionExtension`.
- Weights are now a thing and must be provided via the new function `fn
weight`.

#### `TransactionExtensionBase`

This trait takes care of anything which is not dependent on types
specific to your runtime, most notably `Call`.

- `AdditionalSigned`/`additional_signed` is renamed to
`Implicit`/`implicit`.
- Weight must be returned by implementing the `weight` function. If your
extension is associated with a pallet, you'll probably want to do this
via the pallet's existing benchmarking infrastructure.

#### `TransactionExtension`

Generally:
- `pre_dispatch` is now `prepare` and you *should not reexecute the
`validate` functionality in there*!
- You don't get an account ID any more; you get an origin instead. If
you need to presume an account ID, then you can use the trait function
`AsSystemOriginSigner::as_system_origin_signer`.
- You get an additional ticket, similar to `Pre`, called `Val`. This
defines data which is passed from `validate` into `prepare`. This is
important since you should not be duplicating logic from `validate` to
`prepare`, you need a way of passing your working from the former into
the latter. This is it.
- This trait takes two type parameters: `Call` and `Context`. `Call` is
the runtime call type which used to be an associated type; you can just
move it to become a type parameter for your trait impl. `Context` is not
currently used and you can safely implement over it as an unbounded
type.
- There's no `AccountId` associated type any more. Just remove it.

Regarding `validate`:
- You get three new parameters in `validate`; all can be ignored when
migrating from `SignedExtension`.
- `validate` returns a tuple on success; the second item in the tuple is
the new ticket type `Self::Val` which gets passed in to `prepare`. If
you use any information extracted during `validate` (off-chain and
on-chain, non-mutating) in `prepare` (on-chain, mutating) then you can
pass it through with this. For the tuple's last item, just return the
`origin` argument.

Regarding `prepare`:
- This is renamed from `pre_dispatch`, but there is one change:
- FUNCTIONALITY TO VALIDATE THE TRANSACTION NEED NOT BE DUPLICATED FROM
`validate`!!
- (This is different to `SignedExtension` which was required to run the
same checks in `pre_dispatch` as in `validate`.)

Regarding `post_dispatch`:
- Since there are no unsigned transactions handled by
`TransactionExtension`, `Pre` is always defined, so the first parameter
is `Self::Pre` rather than `Option<Self::Pre>`.

If you make use of `SignedExtension::validate_unsigned` or
`SignedExtension::pre_dispatch_unsigned`, then:
- Just use the regular versions of these functions instead.
- Have your logic execute in the case that the `origin` is `None`.
- Ensure your transaction creation logic creates a General Transaction
rather than a Bare Transaction; this means having to include all
`TransactionExtension`s' data.
- `ValidateUnsigned` can still be used (for now) if you need to be able
to construct transactions which contain none of the extension data,
however these will be phased out in stage 2 of the Transactions Horizon,
so you should consider moving to an extension-centric design.

## TODO

- [x] Introduce `CheckSignature` impl of `TransactionExtension` to
ensure it's possible to have crypto be done wholly in a
`TransactionExtension`.
- [x] Deprecate `SignedExtension` and move all uses in codebase to
`TransactionExtension`.
  - [x] `ChargeTransactionPayment`
  - [x] `DummyExtension`
  - [x] `ChargeAssetTxPayment` (asset-tx-payment)
  - [x] `ChargeAssetTxPayment` (asset-conversion-tx-payment)
  - [x] `CheckWeight`
  - [x] `CheckTxVersion`
  - [x] `CheckSpecVersion`
  - [x] `CheckNonce`
  - [x] `CheckNonZeroSender`
  - [x] `CheckMortality`
  - [x] `CheckGenesis`
  - [x] `CheckOnlySudoAccount`
  - [x] `WatchDummy`
  - [x] `PrevalidateAttests`
  - [x] `GenericSignedExtension`
  - [x] `SignedExtension` (chain-polkadot-bulletin)
  - [x] `RefundSignedExtensionAdapter`
- [x] Implement `fn weight` across the board.
- [ ] Go through all pre-existing extensions which assume an account
signer and explicitly handle the possibility of another kind of origin.
- [x] `CheckNonce` should probably succeed in the case of a non-account
origin.
- [x] `CheckNonZeroSender` should succeed in the case of a non-account
origin.
- [x] `ChargeTransactionPayment` and family should fail in the case of a
non-account origin.
  - [ ] 
- [x] Fix any broken tests.

---------

Signed-off-by: georgepisaltu <[email protected]>
Signed-off-by: Alexandru Vasile <[email protected]>
Signed-off-by: dependabot[bot] <[email protected]>
Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Signed-off-by: Alexandru Gheorghe <[email protected]>
Signed-off-by: Andrei Sandu <[email protected]>
Co-authored-by: Nikhil Gupta <[email protected]>
Co-authored-by: georgepisaltu <[email protected]>
Co-authored-by: Chevdor <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Maciej <[email protected]>
Co-authored-by: Javier Viola <[email protected]>
Co-authored-by: Marcin S. <[email protected]>
Co-authored-by: Tsvetomir Dimitrov <[email protected]>
Co-authored-by: Javier Bullrich <[email protected]>
Co-authored-by: Koute <[email protected]>
Co-authored-by: Adrian Catangiu <[email protected]>
Co-authored-by: Vladimir Istyufeev <[email protected]>
Co-authored-by: Ross Bulat <[email protected]>
Co-authored-by: Gonçalo Pestana <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Svyatoslav Nikolsky <[email protected]>
Co-authored-by: André Silva <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: s0me0ne-unkn0wn <[email protected]>
Co-authored-by: ordian <[email protected]>
Co-authored-by: Sebastian Kunert <[email protected]>
Co-authored-by: Aaro Altonen <[email protected]>
Co-authored-by: Dmitry Markin <[email protected]>
Co-authored-by: Alexandru Vasile <[email protected]>
Co-authored-by: Alexander Samusev <[email protected]>
Co-authored-by: Julian Eager <[email protected]>
Co-authored-by: Michal Kucharczyk <[email protected]>
Co-authored-by: Davide Galassi <[email protected]>
Co-authored-by: Dónal Murray <[email protected]>
Co-authored-by: yjh <[email protected]>
Co-authored-by: Tom Mi <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Will | Paradox | ParaNodes.io <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Joshy Orndorff <[email protected]>
Co-authored-by: Joshy Orndorff <[email protected]>
Co-authored-by: PG Herveou <[email protected]>
Co-authored-by: Alexander Theißen <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: Juan Girini <[email protected]>
Co-authored-by: bader y <[email protected]>
Co-authored-by: James Wilson <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: asynchronous rob <[email protected]>
Co-authored-by: Parth <[email protected]>
Co-authored-by: Andrew Jones <[email protected]>
Co-authored-by: Jonathan Udd <[email protected]>
Co-authored-by: Serban Iorga <[email protected]>
Co-authored-by: Egor_P <[email protected]>
Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: Evgeny Snitko <[email protected]>
Co-authored-by: Just van Stam <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: gupnik <[email protected]>
Co-authored-by: dzmitry-lahoda <[email protected]>
Co-authored-by: zhiqiangxu <[email protected]>
Co-authored-by: Nazar Mokrynskyi <[email protected]>
Co-authored-by: Anwesh <[email protected]>
Co-authored-by: cheme <[email protected]>
Co-authored-by: Sam Johnson <[email protected]>
Co-authored-by: kianenigma <[email protected]>
Co-authored-by: Jegor Sidorenko <[email protected]>
Co-authored-by: Muharem <[email protected]>
Co-authored-by: joepetrowski <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Gabriel Facco de Arruda <[email protected]>
Co-authored-by: Squirrel <[email protected]>
Co-authored-by: Andrei Sandu <[email protected]>
Co-authored-by: georgepisaltu <[email protected]>
Co-authored-by: command-bot <>

fd5f9292

Feb 28, 2024

Multi-Block-Migrations, `poll` hook and new System callbacks (#1781) · eefd5fe4

Oliver Tale-Yazdi authored Feb 28, 2024



This MR is the merge of
https://github.com/paritytech/substrate/pull/14414 and
https://github.com/paritytech/substrate/pull/14275. It implements
[RFC#13](https://github.com/polkadot-fellows/RFCs/pull/13), closes
https://github.com/paritytech/polkadot-sdk/issues/198.

----- 

This Merge request introduces three major topicals:

1. Multi-Block-Migrations
1. New pallet `poll` hook for periodic service work
1. Replacement hooks for `on_initialize` and `on_finalize` in cases
where `poll` cannot be used

and some more general changes to FRAME.  
The changes for each topical span over multiple crates. They are listed
in topical order below.

# 1.) Multi-Block-Migrations

Multi-Block-Migrations are facilitated by creating `pallet_migrations`
and configuring `System::Config::MultiBlockMigrator` to point to it.
Executive picks this up and triggers one step of the migrations pallet
per block.
The chain is in lockdown mode for as long as an MBM is ongoing.
Executive does this by polling `MultiBlockMigrator::ongoing` and not
allowing any transaction in a block, if true.

A MBM is defined through trait `SteppedMigration`. A condensed version
looks like this:
```rust
/// A migration that can proceed in multiple steps.
pub trait SteppedMigration {
	type Cursor: FullCodec + MaxEncodedLen;
	type Identifier: FullCodec + MaxEncodedLen;

	fn id() -> Self::Identifier;

	fn max_steps() -> Option<u32>;

	fn step(
		cursor: Option<Self::Cursor>,
		meter: &mut WeightMeter,
	) -> Result<Option<Self::Cursor>, SteppedMigrationError>;
}
```

`pallet_migrations` can be configured with an aggregated tuple of these
migrations. It then starts to migrate them one-by-one on the next
runtime upgrade.
Two things are important here:
- 1. Doing another runtime upgrade while MBMs are ongoing is not a good
idea and can lead to messed up state.
- 2. **Pallet Migrations MUST BE CONFIGURED IN `System::Config`,
otherwise it is not used.**

The pallet supports an `UpgradeStatusHandler` that can be used to notify
external logic of upgrade start/finish (for example to pause XCM
dispatch).

Error recovery is very limited in the case that a migration errors or
times out (exceeds its `max_steps`). Currently the runtime dev can
decide in `FailedMigrationHandler::failed` how to handle this. One
follow-up would be to pair this with the `SafeMode` pallet and enact
safe mode when an upgrade fails, to allow governance to rescue the
chain. This is currently not possible, since governance is not
`Mandatory`.

## Runtime API

- `Core`: `initialize_block` now returns `ExtrinsicInclusionMode` to
inform the Block Author whether they can push transactions.

### Integration

Add it to your runtime implementation of `Core` and `BlockBuilder`:
```patch
diff --git a/runtime/src/lib.rs b/runtime/src/lib.rs
@@ impl_runtime_apis! {
	impl sp_block_builder::Core<Block> for Runtime {
-		fn initialize_block(header: &<Block as BlockT>::Header) {
+		fn initialize_block(header: &<Block as BlockT>::Header) -> RuntimeExecutiveMode {
			Executive::initialize_block(header)
		}

		...
	}
```

# 2.) `poll` hook

A new pallet hook is introduced: `poll`. `Poll` is intended to replace
mostly all usage of `on_initialize`.
The reason for this is that any code that can be called from
`on_initialize` cannot be migrated through an MBM. Currently there is no
way to statically check this; the implication is to use `on_initialize`
as rarely as possible.
Failing to do so can result in broken storage invariants.

The implementation of the poll hook depends on the `Runtime API` changes
that are explained above.

# 3.) Hard-Deadline callbacks

Three new callbacks are introduced and configured on `System::Config`:
`PreInherents`, `PostInherents` and `PostTransactions`.
These hooks are meant as replacement for `on_initialize` and
`on_finalize` in cases where the code that runs cannot be moved to
`poll`.
The reason for this is to make the usage of HD-code (hard deadline) more
explicit - again to prevent broken invariants by MBMs.

# 4.) FRAME (general changes)

## `frame_system` pallet

A new memorize storage item `InherentsApplied` is added. It is used by
executive to track whether inherents have already been applied.
Executive and can then execute the MBMs directly between inherents and
transactions.

The `Config` gets five new items:
- `SingleBlockMigrations` this is the new way of configuring migrations
that run in a single block. Previously they were defined as last generic
argument of `Executive`. This shift is brings all central configuration
about migrations closer into view of the developer (migrations that are
configured in `Executive` will still work for now but is deprecated).
- `MultiBlockMigrator` this can be configured to an engine that drives
MBMs. One example would be the `pallet_migrations`. Note that this is
only the engine; the exact MBMs are injected into the engine.
- `PreInherents` a callback that executes after `on_initialize` but
before inherents.
- `PostInherents` a callback that executes after all inherents ran
(including MBMs and `poll`).
- `PostTransactions` in symmetry to `PreInherents`, this one is called
before `on_finalize` but after all transactions.

A sane default is to set all of these to `()`. Example diff suitable for
any chain:
```patch
@@ impl frame_system::Config for Test {
 	type MaxConsumers = ConstU32<16>;
+	type SingleBlockMigrations = ();
+	type MultiBlockMigrator = ();
+	type PreInherents = ();
+	type PostInherents = ();
+	type PostTransactions = ();
 }
```

An overview of how the block execution now looks like is here. The same
graph is also in the rust doc.

<details><summary>Block Execution Flow</summary>
<p>

![Screenshot 2023-12-04 at 19 11
29](https://github.com/paritytech/polkadot-sdk/assets/10380170/e88a80c4-ef11-4faa-8df5-8b33a724c054)

</p>
</details> 

## Inherent Order

Moved to https://github.com/paritytech/polkadot-sdk/pull/2154

---------------


## TODO

- [ ] Check that `try-runtime` still works
- [ ] Ensure backwards compatibility with old Runtime APIs
- [x] Consume weight correctly
- [x] Cleanup

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Juan Girini <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Gavin Wood <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

eefd5fe4

Feb 23, 2024

PoV Reclaim Runtime Side (#3002) · 3386377b

Sebastian Kunert authored Feb 23, 2024



# Runtime side for PoV Reclaim

## Implementation Overview
- Hostfunction to fetch the storage proof size has been added to the
PVF. It uses the size tracking recorder that was introduced in my
previous PR.
- Mechanisms to use the reclaim HostFunction have been introduced.
- 1. A SignedExtension that checks the node-reported proof size before
and after application of an extrinsic. Then it reclaims the difference.
- 2. A manual helper to make reclaiming easier when manual interaction
is required, for example in `on_idle` or other hooks.
- In order to utilize the manual reclaiming, I modified `WeightMeter` to
support the reduction of consumed weight, at least for storage proof
size.

## How to use
To enable the general functionality for a parachain:
1. Add the SignedExtension to your parachain runtime. 
2. Provide the HostFunction to the node
3. Enable proof recording during block import

## TODO
- [x] PRDoc

---------

Co-authored-by: Dmitry Markin <[email protected]>
Co-authored-by: Davide Galassi <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

3386377b

Feb 20, 2024

rpc server: make possible to disable/enable batch requests (#3364) · fee810a5

Niklas Adolfsson authored Feb 20, 2024

The rationale behind this, is that it may be useful for some users
actually disable RPC batch requests or limit them by length instead of
the total size bytes of the batch.

This PR adds two new CLI options:

```
--rpc-disable-batch-requests - disable batch requests on the server
--rpc-max-batch-request-len <LEN> - limit batches to LEN on the server.
```

fee810a5

Lift dependencies to the workspace (Part 2/x) (#3366) · e89d0fca

Oliver Tale-Yazdi authored Feb 20, 2024



Lifting some more dependencies to the workspace. Just using the
most-often updated ones for now.
It can be reproduced locally.

```sh
# First you can check if there would be semver incompatible bumps (looks good in this case):
$ zepter transpose dependency lift-to-workspace --ignore-errors syn quote thiserror "regex:^serde.*"

# Then apply the changes:
$ zepter transpose dependency lift-to-workspace --version-resolver=highest syn quote thiserror "regex:^serde.*" --fix

# And format the changes:
$ taplo format --config .config/taplo.toml
```

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

e89d0fca

Feb 19, 2024

Bump the known_good_semver group with 1 update (#3379) · 3168ed4d

dependabot[bot] authored Feb 19, 2024



Bumps the known_good_semver group with 1 update:
[clap](https://github.com/clap-rs/clap).

Updates `clap` from 4.5.0 to 4.5.1
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/releases">clap's
releases</a>.</em></p>
<blockquote>
<h2>v4.5.1</h2>
<h2>[4.5.1] - 2024-02-16</h2>
<h3>Fixes</h3>
<ul>
<li><em>(error)</em> Include suggestion to add <code>--</code> even if
there is a &quot;did you mean&quot; so long as <code>last</code> or
<code>trailing_var_arg</code> is used</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.5.1] - 2024-02-16</h2>
<h3>Fixes</h3>
<ul>
<li><em>(error)</em> Include suggestion to add <code>--</code> even if
there is a &quot;did you mean&quot; so long as <code>last</code> or
<code>trailing_var_arg</code> is used</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/0c01b5558de0a1a513a2af429981099e550d1a78"><code>0c01b55</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/08e0b5bde4b45567be98d12e7d394762fa8da6a4"><code>08e0b5b</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/f2c4e6ec740cce29cea3fd7232e4d2716f089fc2"><code>f2c4e6e</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5359">#5359</a>
from poliorcetics/ab/push-szymvyzpmnqx</li>
<li><a
href="https://github.com/clap-rs/clap/commit/e782775229081697e47d340a155d6b087eeb46f8"><code>e782775</code></a>
fix(complete): Handle newlines in command/arg descriptions</li>
<li><a
href="https://github.com/clap-rs/clap/commit/fba7c8597bf3028400d6f6a22d83cedb7a2bd5a5"><code>fba7c85</code></a>
test(complete): Show newline issue</li>
<li><a
href="https://github.com/clap-rs/clap/commit/8a7a13a5618cfdc4ff328624a5266e7b4d88649a"><code>8a7a13a</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/7b3a3e1e5eee57fc37110343b980cbe8170d20ad"><code>7b3a3e1</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/7b624ca74336f6f14f01007b9039990d53acda0f"><code>7b624ca</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5356">#5356</a>
from epage/escape</li>
<li><a
href="https://github.com/clap-rs/clap/commit/446328a8d3cdaac28884bf8fdfcc85f35c8b5134"><code>446328a</code></a>
fix(error): Include -- in more cases</li>
<li><a
href="https://github.com/clap-rs/clap/commit/7de6df878238ca8e3d9723bb9650f7fe9470d8bd"><code>7de6df8</code></a>
test(error): Show existing last behavior</li>
<li>Additional commits viewable in <a
href="https://github.com/clap-rs/clap/compare/clap_complete-v4.5.0...clap_complete-v4.5.1">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=clap&package-manager=cargo&previous-version=4.5.0&new-version=4.5.1)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

3168ed4d

Feb 17, 2024

rpc server: add rate limiting middleware (#3301) · de73dd9a

Niklas Adolfsson authored Feb 17, 2024

Add RPC server rate limiting which can be utilized by the CLI
`--rpc-rate-limit <calls/per minute>`

Resolves first part of
https://github.com/paritytech/polkadot-sdk/issues/3028

//cc @PierreBesson @kogeler

  you might be interested in this one

---------

Co-authored-by: James Wilson <[email protected]>
Co-authored-by: Xiliang Chen <[email protected]>

de73dd9a

Feb 16, 2024

Bump the known_good_semver group with 6 updates (#3347) · 4b484e6a

dependabot[bot] authored Feb 16, 2024



Bumps the known_good_semver group with 6 updates:

| Package | From | To |
| --- | --- | --- |
| [serde](https://github.com/serde-rs/serde) | `1.0.195` | `1.0.196` |
| [serde_json](https://github.com/serde-rs/json) | `1.0.111` | `1.0.113`
|
| [clap](https://github.com/clap-rs/clap) | `4.4.18` | `4.5.0` |
| [syn](https://github.com/dtolnay/syn) | `2.0.48` | `2.0.49` |
| [serde_yaml](https://github.com/dtolnay/serde-yaml) | `0.9.30` |
`0.9.31` |
| [serde_derive](https://github.com/serde-rs/serde) | `1.0.195` |
`1.0.196` |

Updates `serde` from 1.0.195 to 1.0.196
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/serde/releases">serde's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.196</h2>
<ul>
<li>Improve formatting of &quot;invalid type&quot; error messages
involving floats (<a
href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/serde/commit/ede9762a583c3cc3b87c10a53551828fad339525"><code>ede9762</code></a>
Release 1.0.196</li>
<li><a
href="https://github.com/serde-rs/serde/commit/d438c2d67bf30e3edab31c2272c4829c12cf4cb5"><code>d438c2d</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>
from dtolnay/decimalpoint</li>
<li><a
href="https://github.com/serde-rs/serde/commit/bef110b92a171ac568a47339f5bd97938a8c9da2"><code>bef110b</code></a>
Format Unexpected::Float with decimal point</li>
<li><a
href="https://github.com/serde-rs/serde/commit/b971ef11d1b53da7673e0c8199e87509c003c1a8"><code>b971ef1</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2681">#2681</a>
from dtolnay/workspacedeps</li>
<li><a
href="https://github.com/serde-rs/serde/commit/29d9f693996d199748136d5561a971ed68626724"><code>29d9f69</code></a>
Fix workspace.dependencies default-features future compat warning</li>
<li><a
href="https://github.com/serde-rs/serde/commit/aecb4083bde754155752f5d7d442b64eb7dc636f"><code>aecb408</code></a>
Sort workspace dependencies</li>
<li><a
href="https://github.com/serde-rs/serde/commit/1c675ab3a38e46df4e62465800970f8b20a2055d"><code>1c675ab</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2678">#2678</a>
from rodoufu/workspaceDependencies</li>
<li><a
href="https://github.com/serde-rs/serde/commit/dd619630a337139424725697ccd9a9f7596a2d3a"><code>dd61963</code></a>
Adding workspace dependencies</li>
<li><a
href="https://github.com/serde-rs/serde/commit/111803ab0768d010c606f2fc0d0add12750d5eef"><code>111803a</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2673">#2673</a>
from Sky9x/msrv-badge</li>
<li><a
href="https://github.com/serde-rs/serde/commit/0024f74f34fbbdc44a7b22457faebe36c5cbe7f8"><code>0024f74</code></a>
Use shields.io's MSRV badges</li>
<li>See full diff in <a
href="https://github.com/serde-rs/serde/compare/v1.0.195...v1.0.196">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_json` from 1.0.111 to 1.0.113
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/json/releases">serde_json's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.113</h2>
<ul>
<li>Add <code>swap_remove</code> and <code>shift_remove</code> methods
on Map (<a
href="https://redirect.github.com/serde-rs/json/issues/1109">#1109</a>)</li>
</ul>
<h2>v1.0.112</h2>
<ul>
<li>Improve formatting of &quot;invalid type&quot; error messages
involving floats (<a
href="https://redirect.github.com/serde-rs/json/issues/1107">#1107</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/json/commit/09d865b34b9701be52764dc9bf571b1a16e9d3dc"><code>09d865b</code></a>
Release 1.0.113</li>
<li><a
href="https://github.com/serde-rs/json/commit/5aeab4eaf69d7959f013f8081865c264d6c00551"><code>5aeab4e</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1109">#1109</a>
from serde-rs/remove</li>
<li><a
href="https://github.com/serde-rs/json/commit/ca3c2ca3696cab79b8b279be7569ee1647250f1e"><code>ca3c2ca</code></a>
Add swap_remove and shift_remove methods on Map</li>
<li><a
href="https://github.com/serde-rs/json/commit/7fece969e3b480ec620419d65c2aeb08776bebcb"><code>7fece96</code></a>
Release 1.0.112</li>
<li><a
href="https://github.com/serde-rs/json/commit/6a6d2bbd9e8b8bd72573b863f12a4ec991f33232"><code>6a6d2bb</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1107">#1107</a>
from serde-rs/unexpectedfloat</li>
<li><a
href="https://github.com/serde-rs/json/commit/83d7bad54ba5db3a44198d6df0ff2e81621683fa"><code>83d7bad</code></a>
Format f64 in error messages using ryu</li>
<li><a
href="https://github.com/serde-rs/json/commit/107c2d1c42817f0d71f07a4d5b0ea2f29dbce8b8"><code>107c2d1</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1106">#1106</a>
from serde-rs/invalidvalue</li>
<li><a
href="https://github.com/serde-rs/json/commit/62ca3e4c01c2e62cd5c2a32e9104f386e5ce7808"><code>62ca3e4</code></a>
Handle Unexpected::Unit in Error::invalid_value</li>
<li><a
href="https://github.com/serde-rs/json/commit/296fafb8f32e8442ef8e4d5725c15ffca726b288"><code>296fafb</code></a>
Factor out JSON-specific Display impl for serde::de::Unexpected</li>
<li><a
href="https://github.com/serde-rs/json/commit/e56cc696bd7c112e5dd4ccfa23d094c3a1c1c1ff"><code>e56cc69</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1105">#1105</a>
from keienWang/master</li>
<li>Additional commits viewable in <a
href="https://github.com/serde-rs/json/compare/v1.0.111...v1.0.113">compare
view</a></li>
</ul>
</details>
<br />

Updates `clap` from 4.4.18 to 4.5.0
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.5.0] - 2024-02-08</h2>
<h3>Compatibility</h3>
<ul>
<li>Update MSRV to 1.74</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/a751c5fe65cd33cb09e85ff3039b4fd0182cdb6e"><code>a751c5f</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/9ec6c942b81c370a8c14652e42295933244555ac"><code>9ec6c94</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/0735119775c2d27fef6b3c232cb9ef2fcbbd963f"><code>0735119</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/c4d3959506f5068f86ffb7ab34b622bd2da40dd8"><code>c4d3959</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5344">#5344</a>
from epage/encode</li>
<li><a
href="https://github.com/clap-rs/clap/commit/f750e577789e1dd34c6950d8c8fe16d1bfd1f49c"><code>f750e57</code></a>
fix(lex): Use new-ish OsStr API</li>
<li><a
href="https://github.com/clap-rs/clap/commit/1d9a554cdfddffcb92d197706b9720e2760cb443"><code>1d9a554</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5343">#5343</a>
from epage/msrv</li>
<li><a
href="https://github.com/clap-rs/clap/commit/4b45d361b1b96eb1f37b7d1db2684203ca828a94"><code>4b45d36</code></a>
chore: Update MSRV to 1.74</li>
<li><a
href="https://github.com/clap-rs/clap/commit/55b1f945157d4d0e480dea6c492e04d0b541088a"><code>55b1f94</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5342">#5342</a>
from epage/divan</li>
<li><a
href="https://github.com/clap-rs/clap/commit/ea77b98da3f321069ae136a241a2d266c2b28bd7"><code>ea77b98</code></a>
test(complete): Make it order independent</li>
<li><a
href="https://github.com/clap-rs/clap/commit/b0fea2bac60819bdb042e10c032817fded67f815"><code>b0fea2b</code></a>
test(bench): Switch to divan</li>
<li>Additional commits viewable in <a
href="https://github.com/clap-rs/clap/compare/v4.4.18...clap_complete-v4.5.0">compare
view</a></li>
</ul>
</details>
<br />

Updates `syn` from 2.0.48 to 2.0.49
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/syn/releases">syn's
releases</a>.</em></p>
<blockquote>
<h2>2.0.49</h2>
<ul>
<li>Improve error location when parsing from an empty string literal
using <code>LitStr::parse</code> (<a
href="https://redirect.github.com/dtolnay/syn/issues/1590">#1590</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/syn/commit/e64c0636042bcd8cf56f9e6c3e828a49cb434649"><code>e64c063</code></a>
Release 2.0.49</li>
<li><a
href="https://github.com/dtolnay/syn/commit/981359c5f46f25f3db42d1b341cc607f634688e7"><code>981359c</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1590">#1590</a>
from dtolnay/streof</li>
<li><a
href="https://github.com/dtolnay/syn/commit/51298d40a447b9e5b3cd8c898c2ea9d24b31cd6d"><code>51298d4</code></a>
Improve error location at eof in LitStr::parse</li>
<li><a
href="https://github.com/dtolnay/syn/commit/270c63384a9d891f65880a03a5a92f0bf4605bbf"><code>270c633</code></a>
Update test suite to nightly-2024-02-13</li>
<li><a
href="https://github.com/dtolnay/syn/commit/dc9cf16b9b0601d2d393d059c46a8f8e0220cc21"><code>dc9cf16</code></a>
Remove FilterAttrs trait when unused</li>
<li><a
href="https://github.com/dtolnay/syn/commit/7dcfac79eda716fa806d68cc0aa811f3be717dc0"><code>7dcfac7</code></a>
Ignore dead_code warning in test</li>
<li><a
href="https://github.com/dtolnay/syn/commit/98318441089f9a9bb596fc010ed14c3b593d4bda"><code>9831844</code></a>
Update signature of Emitter::emit_diagnostic in nightly-2024-02-07</li>
<li><a
href="https://github.com/dtolnay/syn/commit/9e8033f63da93dfb6a3e698449c6edff5e56727d"><code>9e8033f</code></a>
Update test suite to nightly-2024-02-07</li>
<li><a
href="https://github.com/dtolnay/syn/commit/cb3348cd94be50995054796facdfa055b6e0e9e8"><code>cb3348c</code></a>
Update test suite to nightly-2024-01-23</li>
<li><a
href="https://github.com/dtolnay/syn/commit/15b9dbcd67bc56f3da7d33bbede46f7380fc7164"><code>15b9dbc</code></a>
Update test suite to nightly-2024-01-19</li>
<li>Additional commits viewable in <a
href="https://github.com/dtolnay/syn/compare/2.0.48...2.0.49">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_yaml` from 0.9.30 to 0.9.31
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/serde-yaml/releases">serde_yaml's
releases</a>.</em></p>
<blockquote>
<h2>0.9.31</h2>
<ul>
<li>Add <code>swap_remove</code> and <code>shift_remove</code> methods
on Mapping (<a
href="https://redirect.github.com/dtolnay/serde-yaml/issues/408">#408</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/2a77483b23897115bdd69af32ae34d593268d555"><code>2a77483</code></a>
Release 0.9.31</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/d8d1a839cf42ef4627c66bebd743f5fecd24e3ed"><code>d8d1a83</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/serde-yaml/issues/408">#408</a>
from dtolnay/remove</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/f8a99a496836ccfa6c547af9136986d13011be98"><code>f8a99a4</code></a>
Add swap_remove and shift_remove methods on Mapping</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/8b26413e3307e39329dc68a96b065058aec38f9a"><code>8b26413</code></a>
Work around dead_code warning in tests</li>
<li>See full diff in <a
href="https://github.com/dtolnay/serde-yaml/compare/0.9.30...0.9.31">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_derive` from 1.0.195 to 1.0.196
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/serde/releases">serde_derive's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.196</h2>
<ul>
<li>Improve formatting of &quot;invalid type&quot; error messages
involving floats (<a
href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/serde/commit/ede9762a583c3cc3b87c10a53551828fad339525"><code>ede9762</code></a>
Release 1.0.196</li>
<li><a
href="https://github.com/serde-rs/serde/commit/d438c2d67bf30e3edab31c2272c4829c12cf4cb5"><code>d438c2d</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>
from dtolnay/decimalpoint</li>
<li><a
href="https://github.com/serde-rs/serde/commit/bef110b92a171ac568a47339f5bd97938a8c9da2"><code>bef110b</code></a>
Format Unexpected::Float with decimal point</li>
<li><a
href="https://github.com/serde-rs/serde/commit/b971ef11d1b53da7673e0c8199e87509c003c1a8"><code>b971ef1</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2681">#2681</a>
from dtolnay/workspacedeps</li>
<li><a
href="https://github.com/serde-rs/serde/commit/29d9f693996d199748136d5561a971ed68626724"><code>29d9f69</code></a>
Fix workspace.dependencies default-features future compat warning</li>
<li><a
href="https://github.com/serde-rs/serde/commit/aecb4083bde754155752f5d7d442b64eb7dc636f"><code>aecb408</code></a>
Sort workspace dependencies</li>
<li><a
href="https://github.com/serde-rs/serde/commit/1c675ab3a38e46df4e62465800970f8b20a2055d"><code>1c675ab</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2678">#2678</a>
from rodoufu/workspaceDependencies</li>
<li><a
href="https://github.com/serde-rs/serde/commit/dd619630a337139424725697ccd9a9f7596a2d3a"><code>dd61963</code></a>
Adding workspace dependencies</li>
<li><a
href="https://github.com/serde-rs/serde/commit/111803ab0768d010c606f2fc0d0add12750d5eef"><code>111803a</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2673">#2673</a>
from Sky9x/msrv-badge</li>
<li><a
href="https://github.com/serde-rs/serde/commit/0024f74f34fbbdc44a7b22457faebe36c5cbe7f8"><code>0024f74</code></a>
Use shields.io's MSRV badges</li>
<li>See full diff in <a
href="https://github.com/serde-rs/serde/compare/v1.0.195...v1.0.196">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

4b484e6a

Feb 14, 2024

rpc: bump jsonrpsee v0.22 and fix race in `rpc v2 chain_head` (#3230) · c7c4fe01

Niklas Adolfsson authored Feb 14, 2024

Close #2992 

Breaking changes:
- rpc server grafana metric `substrate_rpc_requests_started` is removed
(not possible to implement anymore)
- rpc server grafana metric `substrate_rpc_requests_finished` is removed
(not possible to implement anymore)
- rpc server ws ping/pong not ACK:ed within 30 seconds more than three
times then the connection will be closed

Added
- rpc server grafana metric `substrate_rpc_sessions_time` is added to
get the duration for each websocket session

c7c4fe01

Jan 31, 2024

[frame] `#[pallet::composite_enum]` improved variant count handling + removed... · bb8ddc46

Branislav Kontur authored Jan 31, 2024

[frame] `#[pallet::composite_enum]` improved variant count handling + removed `pallet_balances`'s `MaxHolds` config (#2657)

I started this investigation/issue based on @liamaharon

 question
[here](https://github.com/paritytech/polkadot-sdk/pull/1801#discussion_r1410452499).

## Problem

The `pallet_balances` integrity test should correctly detect that the
runtime has correct distinct `HoldReasons` variant count. I assume the
same situation exists for RuntimeFreezeReason.

It is not a critical problem, if we set `MaxHolds` with a sufficiently
large value, everything should be ok. However, in this case, the
integrity_test check becomes less useful.

**Situation for "any" runtime:**
- `HoldReason` enums from different pallets:
```rust
        /// from pallet_nis
        #[pallet::composite_enum]
	pub enum HoldReason {
		NftReceipt,
	}

        /// from pallet_preimage
        #[pallet::composite_enum]
	pub enum HoldReason {
		Preimage,
	}

        // from pallet_state-trie-migration
        #[pallet::composite_enum]
	pub enum HoldReason {
		SlashForContinueMigrate,
		SlashForMigrateCustomTop,
		SlashForMigrateCustomChild,
	}
```

- generated `RuntimeHoldReason` enum looks like:
```rust
pub enum RuntimeHoldReason {

    #[codec(index = 32u8)]
    Preimage(pallet_preimage::HoldReason),

    #[codec(index = 38u8)]
    Nis(pallet_nis::HoldReason),

    #[codec(index = 42u8)]
    StateTrieMigration(pallet_state_trie_migration::HoldReason),
}
```

- composite enum `RuntimeHoldReason` variant count is detected as `3`
- we set `type MaxHolds = ConstU32<3>`
- `pallet_balances::integrity_test` is ok with `3`(at least 3)

However, the real problem can occur in a live runtime where some
functionality might stop working. This is due to a total of 5 distinct
hold reasons (for pallets with multi-instance support, it is even more),
and not all of them can be used because of an incorrect `MaxHolds`,
which is deemed acceptable according to the `integrity_test`:
  ```
  // pseudo-code - if we try to call all of these:

T::Currency::hold(&pallet_nis::HoldReason::NftReceipt.into(),
&nft_owner, deposit)?;
T::Currency::hold(&pallet_preimage::HoldReason::Preimage.into(),
&nft_owner, deposit)?;

T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForContinueMigrate.into(),
&nft_owner, deposit)?;

  // With `type MaxHolds = ConstU32<3>` these two will fail

T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomTop.into(),
&nft_owner, deposit)?;

T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomChild.into(),
&nft_owner, deposit)?;
  ```  


## Solutions

A macro `#[pallet::*]` expansion is extended of `VariantCount`
implementation for the `#[pallet::composite_enum]` enum type. This
expansion generates the `VariantCount` implementation for pallets'
`HoldReason`, `FreezeReason`, `LockId`, and `SlashReason`. Enum variants
must be plain enum values without fields to ensure a deterministic
count.

The composite runtime enum, `RuntimeHoldReason` and
`RuntimeFreezeReason`, now sets `VariantCount::VARIANT_COUNT` as the sum
of pallets' enum `VariantCount::VARIANT_COUNT`:
```rust
#[frame_support::pallet(dev_mode)]
mod module_single_instance {

	#[pallet::composite_enum]
	pub enum HoldReason {
		ModuleSingleInstanceReason1,
		ModuleSingleInstanceReason2,
	}
...
}

#[frame_support::pallet(dev_mode)]
mod module_multi_instance {

	#[pallet::composite_enum]
	pub enum HoldReason<I: 'static = ()> {
		ModuleMultiInstanceReason1,
		ModuleMultiInstanceReason2,
		ModuleMultiInstanceReason3,
	}
...
}


impl self::sp_api_hidden_includes_construct_runtime::hidden_include::traits::VariantCount
    for RuntimeHoldReason
{
    const VARIANT_COUNT: u32 = 0
        + module_single_instance::HoldReason::VARIANT_COUNT
        + module_multi_instance::HoldReason::<module_multi_instance::Instance1>::VARIANT_COUNT
        + module_multi_instance::HoldReason::<module_multi_instance::Instance2>::VARIANT_COUNT
        + module_multi_instance::HoldReason::<module_multi_instance::Instance3>::VARIANT_COUNT;
}
```

In addition, `MaxHolds` is removed (as suggested
[here](https://github.com/paritytech/polkadot-sdk/pull/2657#discussion_r1443324573))
from `pallet_balances`, and its `Holds` are now bounded to
`RuntimeHoldReason::VARIANT_COUNT`. Therefore, there is no need to let
the runtime specify `MaxHolds`.


## For reviewers

Relevant changes can be found here:
- `substrate/frame/support/procedural/src/lib.rs` 
-  `substrate/frame/support/procedural/src/pallet/parse/composite.rs`
-  `substrate/frame/support/procedural/src/pallet/expand/composite.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/composite_helper.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/hold_reason.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/freeze_reason.rs`
- `substrate/frame/support/src/traits/misc.rs`

And the rest of the files is just about removed `MaxHolds` from
`pallet_balances`

## Next steps

Do the same for `MaxFreezes`
https://github.com/paritytech/polkadot-sdk/issues/2997.

---------

Co-authored-by: command-bot <>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Dónal Murray <[email protected]>
Co-authored-by: gupnik <[email protected]>

bb8ddc46

Jan 29, 2024

Do not run unneeded subsystems on collator and its alongside node (#3061) · 3e8139e7

s0me0ne-unkn0wn authored Jan 29, 2024

Currently, collators and their alongside nodes spin up a full-scale
overseer running a bunch of subsystems that are not needed if the node
is not a validator. That was considered to be harmless; however, we've
got problems with unused subsystems getting stalled for a reason not
currently known, resulting in the overseer exiting and bringing down the
whole node.

This PR aims to only run needed subsystems on such nodes, replacing the
rest with `DummySubsystem`.

It also enables collator-optimized availability recovery subsystem
implementation.

Partially solves #1730.

3e8139e7

Jan 26, 2024

Sync Cargo.toml and crates.io versions (#3034) · 3717ec38

Liam Aharon authored Jan 27, 2024



Related https://github.com/paritytech/polkadot-sdk/issues/3032

---

Using https://github.com/liamaharon/cargo-workspace-version-tools/ 

`cargo run -- sync --path ../polkadot-sdk`

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

3717ec38

Jan 23, 2024

rpc: backpressured RPC server (bump jsonrpsee 0.20) (#1313) · e16ef086

Niklas Adolfsson authored Jan 23, 2024

This is a rather big change in jsonrpsee, the major things in this bump
are:
- Server backpressure (the subscription impls are modified to deal with
that)
- Allow custom error types / return types (remove jsonrpsee::core::Error
and jsonrpee::core::CallError)
- Bug fixes (graceful shutdown in particular not used by substrate
anyway)
   - Less dependencies for the clients in particular
   - Return type requires Clone in method call responses
   - Moved to tokio channels
   - Async subscription API (not used in this PR)

Major changes in this PR:
- The subscriptions are now bounded and if subscription can't keep up
with the server it is dropped
- CLI: add parameter to configure the jsonrpc server bounded message
buffer (default is 64)
- Add our own subscription helper to deal with the unbounded streams in
substrate

The most important things in this PR to review is the added helpers
functions in `substrate/client/rpc/src/utils.rs` and the rest is pretty
much chore.

Regarding the "bounded buffer limit" it may cause the server to handle
the JSON-RPC calls
slower than before.

The message size limit is bounded by "--rpc-response-size" thus "by
default 10MB * 64 = 640MB"
but the subscription message size is not covered by this limit and could
be capped as well.

Hopefully the last release prior to 1.0, sorry in advance for a big PR

Previous attempt: https://github.com/paritytech/substrate/pull/13992

Resolves https://github.com/paritytech/polkadot-sdk/issues/748, resolves
https://github.com/paritytech/polkadot-sdk/issues/627

e16ef086

Jan 18, 2024

Bump the known_good_semver group with 1 update (#2953) · 1113fce5

dependabot[bot] authored Jan 18, 2024



Bumps the known_good_semver group with 1 update:
[clap](https://github.com/clap-rs/clap).

Updates `clap` from 4.4.16 to 4.4.18
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/releases">clap's
releases</a>.</em></p>
<blockquote>
<h2>v4.4.18</h2>
<h2>[4.4.18] - 2024-01-16</h2>
<h3>Fixes</h3>
<ul>
<li><em>(error)</em> When lacking <code>usage</code> feature, ensure the
list of required arguments is unique</li>
</ul>
<h2>v4.4.17</h2>
<h2>[4.4.17] - 2024-01-15</h2>
<h3>Fixes</h3>
<ul>
<li>Fix <code>panic!</code> when mixing
<code>args_conflicts_with_subcommands</code> with <code>ArgGroup</code>
(which is implicit with <code>derive</code>) introduced in 4.4.15</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.4.18] - 2024-01-16</h2>
<h3>Fixes</h3>
<ul>
<li><em>(error)</em> When lacking <code>usage</code> feature, ensure the
list of required arguments is unique</li>
</ul>
<h2>[4.4.17] - 2024-01-15</h2>
<h3>Fixes</h3>
<ul>
<li>Fix <code>panic!</code> when mixing
<code>args_conflicts_with_subcommands</code> with <code>ArgGroup</code>
(which is implicit with <code>derive</code>) introduced in 4.4.15</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/0134f45ff0e2e2be8c451565e4fbf5d3cb7b7cfd"><code>0134f45</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/995ee032779d802606e599caf4f498ea51e92e82"><code>995ee03</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/2f1890907ed4e78674feeb96df34cfb813b84686"><code>2f18909</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5314">#5314</a>
from epage/required</li>
<li><a
href="https://github.com/clap-rs/clap/commit/0a635b9a20077e2f932a9baee527052d8ed45d9e"><code>0a635b9</code></a>
fix(parser): Don't duplicate requireds when usage disabled</li>
<li><a
href="https://github.com/clap-rs/clap/commit/e648e086f3934afb40b121b5999b9e23657ddc28"><code>e648e08</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5311">#5311</a>
from sourcefrog/doc-exitcode</li>
<li><a
href="https://github.com/clap-rs/clap/commit/8c83971b8c356b8c9abfbbb2320cb946a2ee8139"><code>8c83971</code></a>
docs: Link to exit code info</li>
<li><a
href="https://github.com/clap-rs/clap/commit/b250c0b5f5920b59e551bf0ec90e17c6103ae4a2"><code>b250c0b</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5310">#5310</a>
from epage/pty</li>
<li><a
href="https://github.com/clap-rs/clap/commit/c742b8eb0ca648b645b616e064e00408944f390e"><code>c742b8e</code></a>
chore(complete): Update completest-pty</li>
<li><a
href="https://github.com/clap-rs/clap/commit/f524d84c1d3eca1c980c5150c750d9e00cbbdb0c"><code>f524d84</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/944fb81cf593af1cd3a58dd959c934f0ff483182"><code>944fb81</code></a>
docs: Update changelog</li>
<li>Additional commits viewable in <a
href="https://github.com/clap-rs/clap/compare/v4.4.16...v4.4.18">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=clap&package-manager=cargo&previous-version=4.4.16&new-version=4.4.18)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Dónal Murray <[email protected]>

1113fce5

Jan 15, 2024

Bump the known_good_semver group with 1 update (#2926) · ac303406

dependabot[bot] authored Jan 15, 2024



Bumps the known_good_semver group with 1 update:
[clap](https://github.com/clap-rs/clap).

Updates `clap` from 4.4.14 to 4.4.16
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/releases">clap's
releases</a>.</em></p>
<blockquote>
<h2>v4.4.16</h2>
<h2>[4.4.16] - 2024-01-12</h2>
<h3>Fixes</h3>
<ul>
<li>Ensure invalid escape sequences in user-defined strings are
correctly stripped when terminal doesn't support color</li>
</ul>
<h2>v4.4.15</h2>
<h2>[4.4.15] - 2024-01-11</h2>
<h3>Fixes</h3>
<ul>
<li>Improve error for <code>args_conflicts_with_subcommands</code></li>
<li>Ensure we error for <code>args_conflicts_with_subcommands</code>
when using subcommand short and long flags</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.4.16] - 2024-01-12</h2>
<h3>Fixes</h3>
<ul>
<li>Ensure invalid escape sequences in user-defined strings are
correctly stripped when terminal doesn't support color</li>
</ul>
<h2>[4.4.15] - 2024-01-11</h2>
<h3>Fixes</h3>
<ul>
<li>Improve error for <code>args_conflicts_with_subcommands</code></li>
<li>Ensure we error for <code>args_conflicts_with_subcommands</code>
when using subcommand short and long flags</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/cbc9c9dd44fc4be25c196213d508b9d2a9c282f3"><code>cbc9c9d</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/4718b89486c7c4236a18411b8449afc2d93f8e3d"><code>4718b89</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/38f805cea0cf50a0f26ed01e4fdf550ca8a555fa"><code>38f805c</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5299">#5299</a>
from epage/ansi</li>
<li><a
href="https://github.com/clap-rs/clap/commit/2a3356a53543531726e851e97639810f3828a89b"><code>2a3356a</code></a>
fix: Update anstream</li>
<li><a
href="https://github.com/clap-rs/clap/commit/12b5c39d467ea147c21f5eb3063fc0bc2538e9b7"><code>12b5c39</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/1c5b63390babdb4f3a8994436da4e7f9239b7d43"><code>1c5b633</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/a5d46410e072b9821f76b21839849c4434a2f8da"><code>a5d4641</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5298">#5298</a>
from epage/conflict</li>
<li><a
href="https://github.com/clap-rs/clap/commit/f529ec398c4262296d5e6eb063b1b52d875d7f03"><code>f529ec3</code></a>
fix(parser): Ensure subcommand flags can conflict</li>
<li><a
href="https://github.com/clap-rs/clap/commit/a7e04a53e4a9e310663a0cdb5bfb0753d84b82bd"><code>a7e04a5</code></a>
fix(parser): Improve subcommand conflict error</li>
<li><a
href="https://github.com/clap-rs/clap/commit/ea00ef3051fd5a993b766062a4e9defc777bf233"><code>ea00ef3</code></a>
refactor(error): Allow more conflict sources</li>
<li>Additional commits viewable in <a
href="https://github.com/clap-rs/clap/compare/v4.4.14...v4.4.16">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=clap&package-manager=cargo&previous-version=4.4.14&new-version=4.4.16)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

ac303406

Jan 11, 2024

Cumulus test service cleanup (#2887) · c93f5aba

Sebastian Kunert authored Jan 11, 2024

closes #2567 

Followup for https://github.com/paritytech/polkadot-sdk/pull/2331

This PR contains multiple internal cleanups:

1. This gets rid of the functionality in `generate_genesis_block` which
was only used in one benchmark
2. Fixed `transaction_pool` and `transaction_throughput` benchmarks
failing since they require a tokio runtime now.
3. Removed `parachain_id` CLI option from the test parachain
4. Removed `expect` call from `RuntimeResolver`

c93f5aba

Jan 09, 2024

Bump the known_good_semver group with 1 update (#2881) · 14f49002

dependabot[bot] authored Jan 09, 2024



Bumps the known_good_semver group with 1 update:
[clap](https://github.com/clap-rs/clap).

Updates `clap` from 4.4.13 to 4.4.14
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/releases">clap's
releases</a>.</em></p>
<blockquote>
<h2>v4.4.14</h2>
<h2>[4.4.14] - 2024-01-08</h2>
<h3>Documentation</h3>
<ul>
<li>Fix <code>find</code> cookbook entry to allow repeats of
flags/options</li>
</ul>
<h3>Features</h3>
<ul>
<li>Allow <code>num_args(0)</code> on options which allows making them
emulate being a flag for position-tracking flags</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.4.14] - 2024-01-08</h2>
<h3>Documentation</h3>
<ul>
<li>Fix <code>find</code> cookbook entry to allow repeats of
flags/options</li>
</ul>
<h3>Features</h3>
<ul>
<li>Allow <code>num_args(0)</code> on options which allows making them
emulate being a flag for position-tracking flags</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/514f28bc92ed683d53292cbe9457db3ec5df7b6f"><code>514f28b</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/1440456d3ddaa6d9624297d83de9bb9abe82f10b"><code>1440456</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/d6479ff7ddbcf524146428c92be23273b4f8bac5"><code>d6479ff</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5290">#5290</a>
from epage/or</li>
<li><a
href="https://github.com/clap-rs/clap/commit/02f82146ad746ce9d1874e38ec7033150bb12622"><code>02f8214</code></a>
docs(cookbook): Clarify intent of fake flags</li>
<li><a
href="https://github.com/clap-rs/clap/commit/c603f34574832b8894b44e0f67fd19dc7869e808"><code>c603f34</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5275">#5275</a>
from epage/ci</li>
<li><a
href="https://github.com/clap-rs/clap/commit/641b42b2e82086775619bd15854ddb5b80311b49"><code>641b42b</code></a>
chore(ci): Speed up critical path of CI</li>
<li><a
href="https://github.com/clap-rs/clap/commit/3eaf1af052bd5255cc2440dc1cc8f80831a3428b"><code>3eaf1af</code></a>
fix(help): Correctly show help for fake flags</li>
<li><a
href="https://github.com/clap-rs/clap/commit/d63106b9f698df0d2241662ab1459c823890dec4"><code>d63106b</code></a>
docs(cookbook): Allow repeated operators</li>
<li><a
href="https://github.com/clap-rs/clap/commit/148e102ac37bd0e5ca99cfe9c5d57ffc6243cf66"><code>148e102</code></a>
fix(builder): Allow custom flag definitions</li>
<li><a
href="https://github.com/clap-rs/clap/commit/d53d881e339fec64e48990170b542fae4140eaaa"><code>d53d881</code></a>
docs(cookbook): Demonstrate bad 'find' behavior</li>
<li>See full diff in <a
href="https://github.com/clap-rs/clap/compare/v4.4.13...v4.4.14">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=clap&package-manager=cargo&previous-version=4.4.13&new-version=4.4.14)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

14f49002

Jan 07, 2024

Bump the known_good_semver group with 4 updates (#2865) · 204fe7ff

dependabot[bot] authored Jan 07, 2024



Bumps the known_good_semver group with 4 updates:
[serde](https://github.com/serde-rs/serde),
[serde_json](https://github.com/serde-rs/json),
[clap](https://github.com/clap-rs/clap) and
[syn](https://github.com/dtolnay/syn).

Updates `serde` from 1.0.194 to 1.0.195
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/serde/releases">serde's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.195</h2>
<ul>
<li>Prevent remote definitions of tuple struct or tuple variant from
triggering dead_code warning (<a
href="https://redirect.github.com/serde-rs/serde/issues/2671">#2671</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/serde/commit/03eec42c3313b36da416be1486e9ecac345784d5"><code>03eec42</code></a>
Release 1.0.195</li>
<li><a
href="https://github.com/serde-rs/serde/commit/196f311ae2fd8ad94fe38a57830419859a4d3dbb"><code>196f311</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2671">#2671</a>
from dtolnay/deadremote</li>
<li><a
href="https://github.com/serde-rs/serde/commit/38d9e0b2091e9b6150486c2c37367819b86bcc39"><code>38d9e0b</code></a>
Revert &quot;Add FIXME to fix dead_code warning when using
serde(remote)&quot;</li>
<li><a
href="https://github.com/serde-rs/serde/commit/6502b3131697eff6420786ad71f87f29cfff3a13"><code>6502b31</code></a>
Fix new dead_code warning in tuple struct and tuple variant remote
defs</li>
<li><a
href="https://github.com/serde-rs/serde/commit/6f1a8c3115c8d2502178c25d610fbaee2e82c46b"><code>6f1a8c3</code></a>
Add FIXME to fix dead_code warning when using serde(remote)</li>
<li><a
href="https://github.com/serde-rs/serde/commit/d883c94cc9fe72d0512dc7f4def7191a401595c9"><code>d883c94</code></a>
Work around dead_code warning in tests</li>
<li><a
href="https://github.com/serde-rs/serde/commit/961fa59a7469c5b5e323b9723323df412048d60d"><code>961fa59</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2670">#2670</a>
from serde-rs/exhaustive</li>
<li><a
href="https://github.com/serde-rs/serde/commit/8bc71def551df190e6817d3311e5c76f751f53e6"><code>8bc71de</code></a>
Fill in omitted patterns for GenericArguments match</li>
<li><a
href="https://github.com/serde-rs/serde/commit/7c65a9dc0eab2d4d829b258a7b3549351bbe8dcd"><code>7c65a9d</code></a>
Pick up changes to non_exhaustive_omitted_patterns lint</li>
<li>See full diff in <a
href="https://github.com/serde-rs/serde/compare/v1.0.194...v1.0.195">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_json` from 1.0.110 to 1.0.111
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/json/releases">serde_json's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.111</h2>
<ul>
<li>Improve floating point parsing performance on loongarch64 (<a
href="https://redirect.github.com/serde-rs/json/issues/1100">#1100</a>,
thanks <a
href="https://github.com/heiher"><code>@heiher</code></a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/json/commit/0131ac68212e8094bd14ee618587d731b4f9a68b"><code>0131ac6</code></a>
Release 1.0.111</li>
<li><a
href="https://github.com/serde-rs/json/commit/96ecfadd3f7dd6366a2d07a098e228d15df93cb4"><code>96ecfad</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1100">#1100</a>
from heiher/limb-64-la64</li>
<li><a
href="https://github.com/serde-rs/json/commit/c80dbaf8ff5902ca670e0a48bbe495065b9314f5"><code>c80dbaf</code></a>
Set limb width to 64 for loongarch64</li>
<li>See full diff in <a
href="https://github.com/serde-rs/json/compare/v1.0.110...v1.0.111">compare
view</a></li>
</ul>
</details>
<br />

Updates `clap` from 4.4.12 to 4.4.13
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/releases">clap's
releases</a>.</em></p>
<blockquote>
<h2>v4.4.13</h2>
<h2>[4.4.13] - 2024-01-04</h2>
<h3>Documentation</h3>
<ul>
<li>Fix link to structopt migration guide</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.4.13] - 2024-01-04</h2>
<h3>Documentation</h3>
<ul>
<li>Fix link to structopt migration guide</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/2ab48b295c2463ce8c141a9868095b811ccf3b99"><code>2ab48b2</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/7a06a8cd619db704c6d826bf752eae3b86ce23a8"><code>7a06a8c</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/cca190efedf40f48147a3a4a777a9cc17728abdf"><code>cca190e</code></a>
docs: Correct link to StructOpt migration guide</li>
<li><a
href="https://github.com/clap-rs/clap/commit/5c31f453c1a9f46109db8e0a47ed212748c0556c"><code>5c31f45</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5281">#5281</a>
from Manishearth/safety-docs</li>
<li><a
href="https://github.com/clap-rs/clap/commit/ddae7e6f411c4c87294212152b8d9beea16637e7"><code>ddae7e6</code></a>
Correct safety docs</li>
<li><a
href="https://github.com/clap-rs/clap/commit/48d28aa689bfd0fb44ec025244b30ba261e2515a"><code>48d28aa</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/748ce18cc2ccc3f7c07fa8b7c5b6f90ed9242b72"><code>748ce18</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/adbe6ec4cb6a617070c41927a389d0bea7b30936"><code>adbe6ec</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5278">#5278</a>
from henry-hsieh/fix-nosort</li>
<li><a
href="https://github.com/clap-rs/clap/commit/2b48858ba84c62e9af97bee4734d70530254cd8a"><code>2b48858</code></a>
fix: Skip nosort option below bash 4.4</li>
<li><a
href="https://github.com/clap-rs/clap/commit/777b744102cde324dc75534ef043efc15a9f40be"><code>777b744</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5277">#5277</a>
from clap-rs/renovate/actions-setup-python-5.x</li>
<li>Additional commits viewable in <a
href="https://github.com/clap-rs/clap/compare/v4.4.12...v4.4.13">compare
view</a></li>
</ul>
</details>
<br />

Updates `syn` from 2.0.47 to 2.0.48
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/syn/releases">syn's
releases</a>.</em></p>
<blockquote>
<h2>2.0.48</h2>
<ul>
<li>Improve error message on unexpected token after <code>else</code>
(<a
href="https://redirect.github.com/dtolnay/syn/issues/1578">#1578</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/syn/commit/5e16fc24e68b16a381cb7ef22455dba9db143083"><code>5e16fc2</code></a>
Release 2.0.48</li>
<li><a
href="https://github.com/dtolnay/syn/commit/dc40084b15ab4a443179fc39cbadac6452408838"><code>dc40084</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1578">#1578</a>
from dtolnay/elseblock</li>
<li><a
href="https://github.com/dtolnay/syn/commit/82fcefce69d36e78301936c5af91f005d6a24357"><code>82fcefc</code></a>
Fix error message on unexpected token after 'else'</li>
<li><a
href="https://github.com/dtolnay/syn/commit/e8a5c68ad45194e575a923f6b1e08f1817196331"><code>e8a5c68</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1576">#1576</a>
from dtolnay/exhaustive</li>
<li><a
href="https://github.com/dtolnay/syn/commit/97b1df6d935cb4801f4090782304577c8574d024"><code>97b1df6</code></a>
Pick up changes to non_exhaustive_omitted_patterns lint</li>
<li>See full diff in <a
href="https://github.com/dtolnay/syn/compare/2.0.47...2.0.48">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

204fe7ff

Jan 05, 2024

`cumulus-primitives-parachain-inherent`: Split into two crates (#2803) · 930c1519

Bastian Köcher authored Jan 05, 2024

This splits `cumulus-primitives-parachain-inherent` into two crates, the
previous `cumulus-primitives-parachain-inherent` and a new
`cumulus-client-parachain-inherent`. The idea behind this is to move the
`create_at` logic into the client crate. This removes quite a lot of
unrelated dependencies from the runtime std build and thus, makes the
compilation faster. On my Laptop the compilation is goes down by one
minute for `asset-hub-rococo-runtime`. I also assume that the full build
of the entire workspace probably can be speed-up a little bit, because
more stuff can be compiled in parallel.

---------

Co-authored-by: command-bot <>

930c1519

Jan 04, 2024

Bump the known_good_semver group with 4 updates (#2845) · 88e7b49c

dependabot[bot] authored Jan 04, 2024



Bumps the known_good_semver group with 4 updates:
[serde](https://github.com/serde-rs/serde),
[serde_json](https://github.com/serde-rs/json),
[clap](https://github.com/clap-rs/clap) and
[serde_yaml](https://github.com/dtolnay/serde-yaml).

Updates `serde` from 1.0.193 to 1.0.194
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/serde/releases">serde's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.194</h2>
<ul>
<li>Update proc-macro2 to fix caching issue when using a rustc-wrapper
such as sccache</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/serde/commit/d2d977a6c6dcff237ae956336d18b0c900c61aad"><code>d2d977a</code></a>
Release 1.0.194</li>
<li><a
href="https://github.com/serde-rs/serde/commit/a9a6ee9d7f2e3a3306ad7c7a8f21dcf369c6acb7"><code>a9a6ee9</code></a>
Pull in proc-macro2 sccache fix</li>
<li><a
href="https://github.com/serde-rs/serde/commit/28c5d215c11b66368b725f04cb92e49e4350bcdc"><code>28c5d21</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2669">#2669</a>
from dtolnay/optionifletelse</li>
<li><a
href="https://github.com/serde-rs/serde/commit/3d6a789562579fb7ea783e0d7f35530914d8baca"><code>3d6a789</code></a>
Remove option_if_let_else clippy suppression</li>
<li><a
href="https://github.com/serde-rs/serde/commit/a0e68698e33fa928f1d9f208d68b17df9f8bb568"><code>a0e6869</code></a>
Work around doc_link_with_quotes pedantic clippy lint</li>
<li>See full diff in <a
href="https://github.com/serde-rs/serde/compare/v1.0.193...v1.0.194">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_json` from 1.0.108 to 1.0.110
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/json/releases">serde_json's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.109</h2>
<ul>
<li>Documentation improvements</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/json/commit/df5cf215b70fb6341b255e7c0a210c06f64c0669"><code>df5cf21</code></a>
Release 1.0.110</li>
<li><a
href="https://github.com/serde-rs/json/commit/c35856a93c37b48b3d6efc4fec8e05554dd3f9d5"><code>c35856a</code></a>
Pull in proc-macro2 sccache fix</li>
<li><a
href="https://github.com/serde-rs/json/commit/f88bf1fccb05aa4de129675de44eb6aaf3fec0a0"><code>f88bf1f</code></a>
Release 1.0.109</li>
<li><a
href="https://github.com/serde-rs/json/commit/bb62c73ecef901e689b0a7a67ed613a32975520c"><code>bb62c73</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1097">#1097</a>
from serde-rs/doccfg</li>
<li><a
href="https://github.com/serde-rs/json/commit/df36d109fd9f9cdd22a874c0177cafec12237f95"><code>df36d10</code></a>
Restore doc cfg on re-exports</li>
<li><a
href="https://github.com/serde-rs/json/commit/c3670913423329c166add9d85ecdfc3e3da21e7a"><code>c367091</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1095">#1095</a>
from dtolnay/hashtest</li>
<li><a
href="https://github.com/serde-rs/json/commit/b328ee7df4dd772922f084600aa7cea39218b694"><code>b328ee7</code></a>
Eliminate hash closure in favor of calling hash_one directly</li>
<li><a
href="https://github.com/serde-rs/json/commit/b9bcbad3c094042f79f1a45189ec0edbb8f9f322"><code>b9bcbad</code></a>
Use BuildHasher::hash_one</li>
<li><a
href="https://github.com/serde-rs/json/commit/7ff6c9e30c2ecc2cdcf089ed86c7ccfe7a41721c"><code>7ff6c9e</code></a>
Use random hasher state for number hashing test</li>
<li><a
href="https://github.com/serde-rs/json/commit/fe031cd1de4dde5b47e0f18934632b41bd18b48d"><code>fe031cd</code></a>
Delete trace_macros! functionality from test</li>
<li>Additional commits viewable in <a
href="https://github.com/serde-rs/json/compare/v1.0.108...v1.0.110">compare
view</a></li>
</ul>
</details>
<br />

Updates `clap` from 4.4.11 to 4.4.12
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/releases">clap's
releases</a>.</em></p>
<blockquote>
<h2>v4.4.12</h2>
<h2>[4.4.12] - 2023-12-28</h2>
<h3>Performance</h3>
<ul>
<li>Only ask <code>TypedValueParser</code> for possible values if
needed</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.4.12] - 2023-12-28</h2>
<h3>Performance</h3>
<ul>
<li>Only ask <code>TypedValueParser</code> for possible values if
needed</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/6d601e6f312857d78f47741268f1748840484d4a"><code>6d601e6</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/048e7f0fbc4f8108894e4307af768c8d332a0576"><code>048e7f0</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/53f5b820988c1c03f0d2696fc144857ad461edc1"><code>53f5b82</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5267">#5267</a>
from vermiculus/sa/avoid-pv-expansion-in-help</li>
<li><a
href="https://github.com/clap-rs/clap/commit/05cd057978db743a65fb5fde33213af752d064e7"><code>05cd057</code></a>
perf: Avoid retrieving possible_values unless used</li>
<li><a
href="https://github.com/clap-rs/clap/commit/29208083b0598ba7d1b80e79821c0ba3eb2342ce"><code>2920808</code></a>
test: Update snapshots</li>
<li><a
href="https://github.com/clap-rs/clap/commit/28763ebb6d8714f6ca588bf477729040e0e760b0"><code>28763eb</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/ace7bb5b4570b030f7c2d0fa91e0afaaac1b0030"><code>ace7bb5</code></a>
docs(complete): Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/76beca4d4d42a817bbb578f23553c64ded2aea97"><code>76beca4</code></a>
docs(complete): Polish API reference for dynamic</li>
<li><a
href="https://github.com/clap-rs/clap/commit/3630e582d3ec59912b8e9369c38687695ddb1f43"><code>3630e58</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5273">#5273</a>
from epage/docsrs</li>
<li><a
href="https://github.com/clap-rs/clap/commit/3724b9e2e4c2a2e69337b6d809949b246d3fef39"><code>3724b9e</code></a>
docs: Include more content on docs.rs</li>
<li>See full diff in <a
href="https://github.com/clap-rs/clap/compare/v4.4.11...v4.4.12">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_yaml` from 0.9.29 to 0.9.30
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/serde-yaml/releases">serde_yaml's
releases</a>.</em></p>
<blockquote>
<h2>0.9.30</h2>
<ul>
<li>Update proc-macro2 to fix caching issue when using a rustc-wrapper
such as sccache</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/09ee25156f608f95150b27edd120bd5471db3c64"><code>09ee251</code></a>
Release 0.9.30</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/caea939ece85ab54ac41de0672d683905f1e406a"><code>caea939</code></a>
Pull in proc-macro2 sccache fix</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/d255918c141fd72d01f169bb5aa0152234981699"><code>d255918</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/serde-yaml/issues/403">#403</a>
from dtolnay/optionifletelse</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/8cfeedd766f83dab24d03b9fb11b72886a247425"><code>8cfeedd</code></a>
Remove option_if_let_else clippy suppression</li>
<li>See full diff in <a
href="https://github.com/dtolnay/serde-yaml/compare/0.9.29...0.9.30">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

88e7b49c

Jan 01, 2024

Extract PartialComponents into a type alias (#2767) · 1dd1a160

Squirrel authored Jan 01, 2024

Pulling PartialComponents into a named `Service` type stops clippy
complaining about type complexity and also makes the type signatures a
little less scary to read.

There's two instances where we can't pull it out into a type because a
nightly feature has not yet been stabilised (E.g. the `imp Fn` isn't
stabilised in a type alias context here:
https://github.com/paritytech/polkadot-sdk/blob/d84e135b

/polkadot/node/service/src/lib.rs#L477
).

---------

Co-authored-by: Bastian Köcher <[email protected]>

1dd1a160

Dec 18, 2023

Bump async-trait from 0.1.73 to 0.1.74 (#2730) · a250652b

dependabot[bot] authored Dec 18, 2023



Bumps [async-trait](https://github.com/dtolnay/async-trait) from 0.1.73
to 0.1.74.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/async-trait/releases">async-trait's
releases</a>.</em></p>
<blockquote>
<h2>0.1.74</h2>
<ul>
<li>Documentation improvements</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/async-trait/commit/265979b07a9af573e1edd3b2a9b179533cfa7a6c"><code>265979b</code></a>
Release 0.1.74</li>
<li><a
href="https://github.com/dtolnay/async-trait/commit/5e677097d2e67f7a5c5e3023e2f3b99b36a9e132"><code>5e67709</code></a>
Fix doc test when async fn in trait is natively supported</li>
<li><a
href="https://github.com/dtolnay/async-trait/commit/ef144aed28b636eb65759505b2323afc4c753fbe"><code>ef144ae</code></a>
Update ui test suite to nightly-2023-10-15</li>
<li><a
href="https://github.com/dtolnay/async-trait/commit/9398a28d6fc977ccf8c286bd85b4b87a883f92ac"><code>9398a28</code></a>
Test docs.rs documentation build in CI</li>
<li><a
href="https://github.com/dtolnay/async-trait/commit/8737173dafa371e5e9e491d736513be1baf697f4"><code>8737173</code></a>
Update ui test suite to nightly-2023-09-24</li>
<li><a
href="https://github.com/dtolnay/async-trait/commit/5ba643c001a55f70c4a44690e040cdfab873ba56"><code>5ba643c</code></a>
Test dyn Trait containing async fn</li>
<li><a
href="https://github.com/dtolnay/async-trait/commit/247c8e7b0b3ff69c9518ebf93e69fe74d47f17b6"><code>247c8e7</code></a>
Add ui test testing the recommendation to use async-trait</li>
<li><a
href="https://github.com/dtolnay/async-trait/commit/799db66a84834c403860df4a8c0227d8fb7f9d9d"><code>799db66</code></a>
Update ui test suite to nightly-2023-09-23</li>
<li><a
href="https://github.com/dtolnay/async-trait/commit/0e60248011f751d8ccf58219d0a79aacfe9619f1"><code>0e60248</code></a>
Update actions/checkout@v3 -&gt; v4</li>
<li><a
href="https://github.com/dtolnay/async-trait/commit/7fcbc83993d5ef483d048c271a7f6c4ac8c98388"><code>7fcbc83</code></a>
Update ui test suite to nightly-2023-08-29</li>
<li>See full diff in <a
href="https://github.com/dtolnay/async-trait/compare/0.1.73...0.1.74">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=async-trait&package-manager=cargo&previous-version=0.1.73&new-version=0.1.74)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

a250652b

Dec 13, 2023

Set clippy lints in workspace (requires rust 1.74) (#2390) · be8e6268

Squirrel authored Dec 13, 2023



We currently use a bit of a hack in `.cargo/config` to make sure that
clippy isn't too annoying by specifying the list of lints.

There is now a stable way to define lints for a workspace. The only down
side is that every crate seems to have to opt into this so there's a
*few* files modified in this PR.

Dependencies:

- [x] PR that upgrades CI to use rust 1.74 is merged.

---------

Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>

be8e6268

Rename `ExportGenesisStateCommand` to `ExportGenesisHeadCommand` and make it... · 8683bbee

Joshy Orndorff authored Dec 13, 2023


Rename `ExportGenesisStateCommand` to `ExportGenesisHeadCommand` and make it respect custom genesis block builders (#2331)

Closes #2326.

This PR both fixes a logic bug and replaces an incorrect name.

## Bug Fix: Respecting custom genesis builder

Prior to this PR the standard logic for creating a genesis block was
repeated inside of cumulus. This PR removes that duplicated logic, and
calls into the proper `BuildGenesisBlock` implementation.

One consequence is that if the genesis block has already been
initialized, it will not be re-created, but rather read from the
database like it is for other node invocations. So you need to watch out
for old unpurged data during the development process. Offchain tools may
need to be updated accordingly. I've already filed
https://github.com/paritytech/zombienet/issues/1519

## Rename: It doesn't export state. It exports head data.

The name export-genesis-state was always wrong, nad it's never too late
to right a wrong. I've changed the name of the struct to
`ExportGenesisHeadCommand`.

There is still the question of what to do with individual nodes' public
CLIs. I have updated the parachain template to a reasonable default that
preserves compatibility with tools that will expect
`export-genesis-state` to still work. And I've chosen not to modify the
public CLIs of any other nodes in the repo. I'll leave it up to their
individual owners/maintains to decide whether that is appropriate.

---------

Co-authored-by: Joshy Orndorff <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

8683bbee

Dec 11, 2023

Bump the known_good_semver group with 2 updates (#2675) · 7b416d84

dependabot[bot] authored Dec 11, 2023



Bumps the known_good_semver group with 2 updates:
[clap](https://github.com/clap-rs/clap) and
[syn](https://github.com/dtolnay/syn).

Updates `clap` from 4.4.10 to 4.4.11
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/releases">clap's
releases</a>.</em></p>
<blockquote>
<h2>v4.4.11</h2>
<h2>[4.4.11] - 2023-12-04</h2>
<h3>Features</h3>
<ul>
<li>Add <code>Command::mut_group</code></li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.4.11] - 2023-12-04</h2>
<h3>Features</h3>
<ul>
<li>Add <code>Command::mut_group</code></li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/d092896d61fd73a5467db85eac035a9ce2ddbc60"><code>d092896</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/c76a713f8bd40a54a58e8c1d2300a6792f1b79d5"><code>c76a713</code></a>
chore: Update lockfile</li>
<li><a
href="https://github.com/clap-rs/clap/commit/b99d17bb0b78b667659982252e8973174e93ae7d"><code>b99d17b</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/b47f8da4d857dd653915ce772757d4b996a36477"><code>b47f8da</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5247">#5247</a>
from epage/group</li>
<li><a
href="https://github.com/clap-rs/clap/commit/2e7c9d11a84b5008e2b42b4df323557a31bb0337"><code>2e7c9d1</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5194">#5194</a>
from c19/patch-1</li>
<li><a
href="https://github.com/clap-rs/clap/commit/37917be0b75d5cd667cd37db6ea5c6bac837c674"><code>37917be</code></a>
feat: Add Command::mut_group</li>
<li><a
href="https://github.com/clap-rs/clap/commit/cf7a0272cc1d55d139983d4408e8bedab51338ad"><code>cf7a027</code></a>
chore: Update from '_rust/main'</li>
<li><a
href="https://github.com/clap-rs/clap/commit/8c836eaa9d9279df467991a3b8463d748b515a0a"><code>8c836ea</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/10">#10</a> from
epage/renovate/migrate-config</li>
<li><a
href="https://github.com/clap-rs/clap/commit/598c6244983fb392457f3fbec9badf25fab6d051"><code>598c624</code></a>
chore(config): migrate config .github/renovate.json5</li>
<li>See full diff in <a
href="https://github.com/clap-rs/clap/compare/v4.4.10...v4.4.11">compare
view</a></li>
</ul>
</details>
<br />

Updates `syn` from 2.0.39 to 2.0.40
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/syn/releases">syn's
releases</a>.</em></p>
<blockquote>
<h2>2.0.40</h2>
<ul>
<li>Fix some edge cases of handling None-delimited groups in expression
parser (<a
href="https://redirect.github.com/dtolnay/syn/issues/1539">#1539</a>, <a
href="https://redirect.github.com/dtolnay/syn/issues/1541">#1541</a>, <a
href="https://redirect.github.com/dtolnay/syn/issues/1542">#1542</a>, <a
href="https://redirect.github.com/dtolnay/syn/issues/1543">#1543</a>, <a
href="https://redirect.github.com/dtolnay/syn/issues/1544">#1544</a>, <a
href="https://redirect.github.com/dtolnay/syn/issues/1545">#1545</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/syn/commit/cf7f40a96a7329fb4215a7a1d8d9e7c93439b169"><code>cf7f40a</code></a>
Release 2.0.40</li>
<li><a
href="https://github.com/dtolnay/syn/commit/1ce8ccf5cd92824d1058019c0ae95b0616f6ac01"><code>1ce8ccf</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1538">#1538</a>
from dtolnay/testinvisible</li>
<li><a
href="https://github.com/dtolnay/syn/commit/d06bff8883e794c0d9d5fe2998210dec113b6eff"><code>d06bff8</code></a>
Add test for parsing Delimiter::None in expressions</li>
<li><a
href="https://github.com/dtolnay/syn/commit/9ec66d42bba0da0041ab6448604b72f673e185f1"><code>9ec66d4</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1545">#1545</a>
from dtolnay/groupedlet</li>
<li><a
href="https://github.com/dtolnay/syn/commit/384621acc640779ee4a8250317c26a42e8ceef90"><code>384621a</code></a>
Fix None-delimited let expression in stmt position</li>
<li><a
href="https://github.com/dtolnay/syn/commit/5325b6d1711c1c9c6787cb6239b472b5f8b5daaf"><code>5325b6d</code></a>
Add test of let expr surrounded in None-delimited group</li>
<li><a
href="https://github.com/dtolnay/syn/commit/0ddfc27cf79573db0b5533c583ff895e9c7f3f72"><code>0ddfc27</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1544">#1544</a>
from dtolnay/nonedelimloop</li>
<li><a
href="https://github.com/dtolnay/syn/commit/9c99b3f62ecebb2ac22f8ed99039934b0a18d0e6"><code>9c99b3f</code></a>
Fix stmt boundary after None-delimited group containing loop</li>
<li><a
href="https://github.com/dtolnay/syn/commit/2781584ea868cce6c9ae750bc442e3b4b2dfd887"><code>2781584</code></a>
Add test of None-delimited group containing loop in match arm</li>
<li><a
href="https://github.com/dtolnay/syn/commit/d33292808432c8530b53c951f2780d7128c4bd0b"><code>d332928</code></a>
Simplify token stream construction in Delimiter::None tests</li>
<li>Additional commits viewable in <a
href="https://github.com/dtolnay/syn/compare/2.0.39...2.0.40">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

7b416d84

Dec 05, 2023
- Adds derive_impl to relay-chain and parachain runtimes (#2476) · 6bab88c6
  gupnik authored Dec 05, 2023
  
  6bab88c6
Dec 01, 2023

Enforce consistent and correct toml formatting (#2518) · 4a293bc5

Liam Aharon authored Dec 01, 2023

Using taplo, fixes all our broken and inconsistent toml formatting and
adds CI to keep them tidy.

If people want we can customise the format rules as described here
https://taplo.tamasfe.dev/configuration/formatter-options.html

@ggwpez

, I suggest zepter is used only for checking features are
propagated, and leave formatting for taplo to avoid duplicate work and
conflicts.

TODO
- [x] Use `exclude = [...]` syntax in taplo file to ignore zombienet
tests instead of deleting the dir

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

4a293bc5

Nov 30, 2023

Bump the known_good_semver group with 2 updates (#2570) · 6742aba0

dependabot[bot] authored Nov 30, 2023



Bumps the known_good_semver group with 2 updates:
[serde](https://github.com/serde-rs/serde) and
[clap](https://github.com/clap-rs/clap).

Updates `serde` from 1.0.188 to 1.0.193
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/serde/releases">serde's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.193</h2>
<ul>
<li>Fix field names used for the deserialization of
<code>RangeFrom</code> and <code>RangeTo</code> (<a
href="https://redirect.github.com/serde-rs/serde/issues/2653">#2653</a>,
<a
href="https://redirect.github.com/serde-rs/serde/issues/2654">#2654</a>,
<a
href="https://redirect.github.com/serde-rs/serde/issues/2655">#2655</a>,
thanks <a
href="https://github.com/emilbonnek"><code>@emilbonnek</code></a>)</li>
</ul>
<h2>v1.0.192</h2>
<ul>
<li>Allow internal tag field in untagged variant (<a
href="https://redirect.github.com/serde-rs/serde/issues/2646">#2646</a>,
thanks <a
href="https://github.com/robsdedude"><code>@robsdedude</code></a>)</li>
</ul>
<h2>v1.0.191</h2>
<ul>
<li>Documentation improvements</li>
</ul>
<h2>v1.0.190</h2>
<ul>
<li>Preserve NaN sign when deserializing f32 from f64 or vice versa (<a
href="https://redirect.github.com/serde-rs/serde/issues/2637">#2637</a>)</li>
</ul>
<h2>v1.0.189</h2>
<ul>
<li>Fix &quot;cannot infer type&quot; error when internally tagged enum
contains untagged variant (<a
href="https://redirect.github.com/serde-rs/serde/issues/2613">#2613</a>,
thanks <a href="https://github.com/ahl"><code>@ahl</code></a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/serde/commit/44613c7d0190dbb5ecd2d5ec19c636f45b7488cc"><code>44613c7</code></a>
Release 1.0.193</li>
<li><a
href="https://github.com/serde-rs/serde/commit/c706281df3c8d50dba1763f19c856df2746eba6c"><code>c706281</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2655">#2655</a>
from dtolnay/rangestartend</li>
<li><a
href="https://github.com/serde-rs/serde/commit/65d75b8fe3105f00ab2e01537d568d4587167582"><code>65d75b8</code></a>
Add RangeFrom and RangeTo tests</li>
<li><a
href="https://github.com/serde-rs/serde/commit/332b0cba40bcbcc7a6b23a9706277c54791a9856"><code>332b0cb</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2654">#2654</a>
from dtolnay/rangestartend</li>
<li><a
href="https://github.com/serde-rs/serde/commit/8c4af412969086bc8f54fdc2a079d373632e0a03"><code>8c4af41</code></a>
Fix more RangeFrom / RangeEnd mixups</li>
<li><a
href="https://github.com/serde-rs/serde/commit/24a78f071b22ae491eec4127be696ac255b9b5d3"><code>24a78f0</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2653">#2653</a>
from emilbonnek/fix/range-to-from-de-mixup</li>
<li><a
href="https://github.com/serde-rs/serde/commit/c91c33436d7aaef7472ebc18b734ddc9b5bd11fa"><code>c91c334</code></a>
Fix Range{From,To} deserialize mixup</li>
<li><a
href="https://github.com/serde-rs/serde/commit/2083f43a287cac8302009fda5bbe41518dd83209"><code>2083f43</code></a>
Update ui test suite to nightly-2023-11-19</li>
<li><a
href="https://github.com/serde-rs/serde/commit/4676abdc9e6bbbddfb33a00ce8d7e81e92f01120"><code>4676abd</code></a>
Release 1.0.192</li>
<li><a
href="https://github.com/serde-rs/serde/commit/35700eb23e21d8cb198ef4a422ddad13b855ce3b"><code>35700eb</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2646">#2646</a>
from robsdedude/fix/2643/allow-tag-field-in-untagged</li>
<li>Additional commits viewable in <a
href="https://github.com/serde-rs/serde/compare/v1.0.188...v1.0.193">compare
view</a></li>
</ul>
</details>
<br />

Updates `clap` from 4.4.6 to 4.4.10
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/releases">clap's
releases</a>.</em></p>
<blockquote>
<h2>v4.4.10</h2>
<h2>[4.4.10] - 2023-11-28</h2>
<h3>Documentation</h3>
<ul>
<li>Link out to changelog</li>
<li>Cross link derive's attribute reference to derive tutorial</li>
</ul>
<h2>v4.4.9</h2>
<h2>[4.4.9] - 2023-11-27</h2>
<h3>Fixes</h3>
<ul>
<li><em>(help)</em> Show correct <code>Command::about</code> under
flattened headings</li>
<li><em>(help)</em> Respect <code>hide</code> when flattening
subcommands</li>
</ul>
<h2>v4.4.8</h2>
<h2>[4.4.8] - 2023-11-10</h2>
<h3>Features</h3>
<ul>
<li>Add <code>Command::flatten_help</code> to allow <code>git stash
-h</code> like help for subcommands</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.4.10] - 2023-11-28</h2>
<h3>Documentation</h3>
<ul>
<li>Link out to changelog</li>
<li>Cross link derive's attribute reference to derive tutorial</li>
</ul>
<h2>[4.4.9] - 2023-11-27</h2>
<h3>Fixes</h3>
<ul>
<li><em>(help)</em> Show correct <code>Command::about</code> under
flattened headings</li>
<li><em>(help)</em> Respect <code>hide</code> when flattening
subcommands</li>
</ul>
<h2>[4.4.8] - 2023-11-10</h2>
<h3>Features</h3>
<ul>
<li>Add <code>Command::flatten_help</code> to allow <code>git stash
-h</code> like help for subcommands</li>
</ul>
<h2>[4.4.7] - 2023-10-24</h2>
<h3>Performance</h3>
<ul>
<li>Reduced code size</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/c0a1814d3c1d93c18faaedc95fd251846e47f4fe"><code>c0a1814</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/c83e681e20b05f7e128088f47f8fcfc44e8ea166"><code>c83e681</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/91bcac4ca9d442786f554abeb7b1ed6d7a464a42"><code>91bcac4</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5230">#5230</a>
from epage/migrate</li>
<li><a
href="https://github.com/clap-rs/clap/commit/030d87505d150345ddd425c1df21c034d2ae7748"><code>030d875</code></a>
docs: Link out to the changelog at the relevant tag</li>
<li><a
href="https://github.com/clap-rs/clap/commit/b661a9de04aebd1adaaafdbf7e470f07a8d8a36d"><code>b661a9d</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5229">#5229</a>
from epage/derive</li>
<li><a
href="https://github.com/clap-rs/clap/commit/a08587b00e347492165ded1415bad6ab339e9f0b"><code>a08587b</code></a>
docs(derive): Link to tutorial sections for attributes</li>
<li><a
href="https://github.com/clap-rs/clap/commit/21b671f689bc0b8d790dc8c42902c22822bf6f82"><code>21b671f</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/93ba76dbaaf9136313a4fe2978693cc39fa467dd"><code>93ba76d</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/c1c55b30d853446e2cab78664c0d22c1b77d4dfd"><code>c1c55b3</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5228">#5228</a>
from epage/flat</li>
<li><a
href="https://github.com/clap-rs/clap/commit/b13f6d98622b80ba30e63c2c6e65d218cc8a4de3"><code>b13f6d9</code></a>
fix(help): Hide 'help' if only flattened subcommand</li>
<li>Additional commits viewable in <a
href="https://github.com/clap-rs/clap/compare/v4.4.6...v4.4.10">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

6742aba0

PoV Reclaim (Clawback) Node Side (#1462) · 9a650c46

Sebastian Kunert authored Nov 30, 2023

This PR provides the infrastructure for the pov-reclaim mechanism
discussed in #209. The goal is to provide the current proof size to the
runtime so it can be used to reclaim storage weight.

## New Host Function
- A new host function is provided
[here](https://github.com/skunert/polkadot-sdk/blob/5b317fda

/cumulus/primitives/pov-reclaim/src/lib.rs#L23).
It returns the size of the current proof size to the runtime. If
recording is not enabled, it returns 0.

## Implementation Overview
- Implement option to enable proof recording during import in the
client. This is currently enabled for `polkadot-parachain`,
`parachain-template` and the cumulus test node.
- Make the proof recorder ready for no-std. It was previously only
enabled for std environments, but we need to record the proof size in
`validate_block` too.
- Provide a recorder implementation that only the records the size of
incoming nodes and does not store the nodes itself.
- Fix benchmarks that were broken by async backing changes
- Provide new externalities extension that is registered by default if
proof recording is enabled.
- I think we should discuss the naming, pov-reclaim was more intuitive
to me, but we could also go with clawback like in the issue.

## Impact of proof recording during import
With proof recording: 6.3058 Kelem/s
Without proof recording: 6.3427 Kelem/s

The measured impact on the importing performance is quite low on my
machine using the block import benchmark. With proof recording I am
seeing a performance hit of 0.585%.

---------

Co-authored-by: command-bot <>
Co-authored-by: Davide Galassi <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

9a650c46