Skip to content
  1. Nov 14, 2023
  3. Nov 13, 2023
    • Adrian Catangiu's avatar
      pallet-xcm: enhance `reserve_transfer_assets` to support remote reserves (#1672) · 18257373
      Adrian Catangiu authored 
      ## Motivation

`pallet-xcm` is the main user-facing interface for XCM functionality,
including assets manipulation functions like `teleportAssets()` and
`reserve_transfer_assets()` calls.

While `teleportAsset()` works both ways, `reserve_transfer_assets()`
works only for sending reserve-based assets to a remote destination and
beneficiary when the reserve is the _local chain_.

## Solution

This PR enhances `pallet_xcm::(limited_)reserve_withdraw_assets` to
support transfers when reserves are other chains.
This will allow complete, **bi-directional** reserve-based asset
transfers user stories using `pallet-xcm`.

Enables following scenarios:
- transferring assets with local reserve (was previously supported iff
asset used as fee also had local reserve - now it works in all cases),
- transferring assets with reserve on destination,
- transferring assets with reserve on remote/third-party chain (iff
assets and fees have same remote reserve),
- transferring assets with reserve different than the reserve of the
asset to be used as fees - meaning can be used to transfer random asset
with local/dest reserve while using DOT for fees on all involved chains,
even if DOT local/dest reserve doesn't match asset reserve,
- transferring assets with any type of local/dest reserve while using
fees which can be teleported between involved chains.

All of the above is done by pallet inner logic without the user having
to specify which scenario/reserves/teleports/etc. The correct scenario
and corresponding XCM programs are identified, and respectively, built
automatically based on runtime configuration of trusted teleporters and
trusted reserves.

#### Current limitations:
- while `fees` and "non-fee" `assets` CAN have different reserves (or
fees CAN be teleported), the remaining "non-fee" `assets` CANNOT, among
themselves, have different reserve locations (this is also implicitly
enforced by `MAX_ASSETS_FOR_TRANSFER=2`, but this can be safely
increased in the future).
- `fees` and "non-fee" `assets` CANNOT have **different remote**
reserves (this could also be supported in the future, but adds even more
complexity while possibly not being worth it - we'll see what the future
holds).

Fixes https://github.com/paritytech/polkadot-sdk/issues/1584
Fixes https://github.com/paritytech/polkadot-sdk/issues/2055



---------

Co-authored-by: default avatarFrancisco Aguirre <[email protected]>
Co-authored-by: default avatarBranislav Kontur <[email protected]>
      18257373
  5. Nov 08, 2023
  7. Nov 05, 2023
  9. Nov 02, 2023
    • Oliver Tale-Yazdi's avatar
      Use `Message Queue` as DMP and XCMP dispatch queue (#1246) · e1c033eb
      Oliver Tale-Yazdi authored 
      (imported from https://github.com/paritytech/cumulus/pull/2157)

## Changes

This MR refactores the XCMP, Parachains System and DMP pallets to use
the [MessageQueue](https://github.com/paritytech/substrate/pull/12485)
for delayed execution of incoming messages. The DMP pallet is entirely
replaced by the MQ and thereby removed. This allows for PoV-bounded
execution and resolves a number of issues that stem from the current
work-around.

All System Parachains adopt this change.  
The most important changes are in `primitives/core/src/lib.rs`,
`parachains/common/src/process_xcm_message.rs`,
`pallets/parachain-system/src/lib.rs`, `pallets/xcmp-queue/src/lib.rs`
and the runtime configs.

### DMP Queue Pallet

The pallet got removed and its logic refactored into parachain-system.
Overweight message management can be done directly through the MQ
pallet.

Final undeployment migrations are provided by
`cumulus_pallet_dmp_queue::UndeployDmpQueue` and `DeleteDmpQueue` that
can be configured with an aux config trait like:

```rust
parameter_types! {
	pub const DmpQueuePalletName: &'static str = \"DmpQueue\" < CHANGE ME;
	pub const RelayOrigin: AggregateMessageOrigin = AggregateMessageOrigin::Parent;
}

impl cumulus_pallet_dmp_queue::MigrationConfig for Runtime {
	type PalletName = DmpQueuePalletName;
	type DmpHandler = frame_support::traits::EnqueueWithOrigin<MessageQueue, RelayOrigin>;
	type DbWeight = <Runtime as frame_system::Config>::DbWeight;
}

// And adding them to your Migrations tuple:
pub type Migrations = (
	...
	cumulus_pallet_dmp_queue::UndeployDmpQueue<Runtime>,
	cumulus_pallet_dmp_queue::DeleteDmpQueue<Runtime>,
);
```

### XCMP Queue pallet

Removed all dispatch queue functionality. Incoming XCMP messages are now
either: Immediately handled if they are Signals, enqueued into the MQ
pallet otherwise.

New config items for the XCMP queue pallet:
```rust
/// The actual queue implementation that retains the messages for later processing.
type XcmpQueue: EnqueueMessage<ParaId>;

/// How a XCM over HRMP from a sibling parachain should be processed.
type XcmpProcessor: ProcessMessage<Origin = ParaId>;

/// The maximal number of suspended XCMP channels at the same time.
#[pallet::constant]
type MaxInboundSuspended: Get<u32>;
```

How to configure those:

```rust
// Use the MessageQueue pallet to store messages for later processing. The `TransformOrigin` is needed since
// the MQ pallet itself operators on `AggregateMessageOrigin` but we want to enqueue `ParaId`s.
type XcmpQueue = TransformOrigin<MessageQueue, AggregateMessageOrigin, ParaId, ParaIdToSibling>;

// Process XCMP messages from siblings. This is type-safe to only accept `ParaId`s. They will be dispatched
// with origin `Junction::Sibling(…)`.
type XcmpProcessor = ProcessFromSibling<
	ProcessXcmMessage<
		AggregateMessageOrigin,
		xcm_executor::XcmExecutor<xcm_config::XcmConfig>,
		RuntimeCall,
	>,
>;

// Not really important what to choose here. Just something larger than the maximal number of channels.
type MaxInboundSuspended = sp_core::ConstU32<1_000>;
```

The `InboundXcmpStatus` storage item was replaced by
`InboundXcmpSuspended` since it now only tracks inbound queue suspension
and no message indices anymore.

Now only sends the most recent channel `Signals`, as all prio ones are
out-dated anyway.

### Parachain System pallet

For `DMP` messages instead of forwarding them to the `DMP` pallet, it
now pushes them to the configured `DmpQueue`. The message processing
which was triggered in `set_validation_data` is now being done by the MQ
pallet `on_initialize`.

XCMP messages are still handed off to the `XcmpMessageHandler`
(XCMP-Queue pallet) - no change here.

New config items for the parachain system pallet:
```rust
/// Queues inbound downward messages for delayed processing. 
///
/// Analogous to the `XcmpQueue` of the XCMP queue pallet.
type DmpQueue: EnqueueMessage<AggregateMessageOrigin>;
``` 

How to configure:
```rust
/// Use the MQ pallet to store DMP messages for delayed processing.
type DmpQueue = MessageQueue;
``` 

## Message Flow

The flow of messages on the parachain side. Messages come in from the
left via the `Validation Data` and finally end up at the `Xcm Executor`
on the right.

![Untitled
(1)](https://github.com/paritytech/cumulus/assets/10380170/6cf8b377-88c9-4aed-96df-baace266e04d)

## Further changes

- Bumped the default suspension, drop and resume thresholds in
`QueueConfigData::default()`.
- `XcmpQueue::{suspend_xcm_execution, resume_xcm_execution}` errors when
they would be a noop.
- Properly validate the `QueueConfigData` before setting it.
- Marked weight files as auto-generated so they wont auto-expand in the
MR files view.
- Move the `hypothetical` asserts to `frame_support` under the name
`experimental_hypothetically`

Questions:
- [ ] What about the ugly `#[cfg(feature = \"runtime-benchmarks\")]` in
the runtimes? Not sure how to best fix. Just having them like this makes
tests fail that rely on the real message processor when the feature is
enabled.
- [ ] Need a good weight for `MessageQueueServiceWeight`. The scheduler
already takes 80% so I put it to 10% but that is quite low.

TODO:
- [x] Remove c&p code after
https://github.com/paritytech/polkadot/pull/6271
- [x] Use `HandleMessage` once it is public in Substrate
- [x] fix `runtime-benchmarks` feature
https://github.com/paritytech/polkadot/pull/6966


- [x] Benchmarks
- [x] Tests
- [ ] Migrate `InboundXcmpStatus` to `InboundXcmpSuspended`
- [x] Possibly cleanup Migrations (DMP+XCMP)
- [x] optional: create `TransformProcessMessageOrigin` in Substrate and
replace `ProcessFromSibling`
- [ ] Rerun weights on ref HW

---------

Signed-off-by: default avatarOliver Tale-Yazdi <[email protected]>
Co-authored-by: default avatarLiam Aharon <[email protected]>
Co-authored-by: default avatarjoe petrowski <[email protected]>
Co-authored-by: default avatarKian Paimani <[email protected]>
Co-authored-by: command-bot <>
      e1c033eb
  11. Nov 01, 2023
  13. Oct 23, 2023
    • Branislav Kontur's avatar
      [testnet] BridgeHubRococo nits (#1972) · e0620fd9
      Branislav Kontur authored 
      This PR does not introduce any functional changes to the existing code,
it merely addresses several minor refactors:
- Moving bridging pallets to separate files.
- Improving the readability and naming of weight files for bridging
pallets and bridging pallet instances.

The reason for this refactor is to facilitate easier plugin integration
for the upcoming bridge between Rococo and Westend.

---------

Co-authored-by: command-bot <>
      e0620fd9
  15. Oct 20, 2023
  17. Oct 18, 2023
    • Keith Yeung's avatar
      Introduce XcmFeesToAccount fee manager (#1234) · 3dece311
      Keith Yeung authored 
      

Combination of paritytech/polkadot#7005, its addon PR
paritytech/polkadot#7585 and its companion paritytech/cumulus#2433.

This PR introduces a new XcmFeesToAccount struct which implements the
`FeeManager` trait, and assigns this struct as the `FeeManager` in the
XCM config for all runtimes.

The struct simply deposits all fees handled by the XCM executor to a
specified account. In all runtimes, the specified account is configured
as the treasury account.

XCM __delivery__ fees are now being introduced (unless the root origin
is sending a message to a system parachain on behalf of the originating
chain).

# Note for reviewers

Most file changes are tests that had to be modified to account for the
new fees.
Main changes are in:
- cumulus/pallets/xcmp-queue/src/lib.rs <- To make it track the delivery
fees exponential factor
- polkadot/xcm/xcm-builder/src/fee_handling.rs <- Added. Has the
FeeManager implementation
- All runtime xcm_config files <- To add the FeeManager to the XCM
configuration

# Important note

After this change, instructions that create and send a new XCM (Query*,
Report*, ExportMessage, InitiateReserveWithdraw, InitiateTeleport,
DepositReserveAsset, TransferReserveAsset, LockAsset and RequestUnlock)
will require the corresponding origin account in the origin register to
pay for transport delivery fees, and the onward message will fail to be
sent if the origin account does not have the required amount. This
delivery fee is on top of what we already collect as tx fees in
pallet-xcm and XCM BuyExecution fees!

Wallet UIs that want to expose the new delivery fee can do so using the
formula:

```
delivery_fee_factor * (base_fee + encoded_msg_len * per_byte_fee)
```

where the delivery fee factor can be obtained from the corresponding
pallet based on which transport you are using (UMP, HRMP or bridges),
the base fee is a constant, the encoded message length from the message
itself and the per byte fee is the same as the configured per byte fee
for txs (i.e. `TransactionByteFee`).

---------

Co-authored-by: default avatarBranislav Kontur <[email protected]>
Co-authored-by: default avatarjoe petrowski <[email protected]>
Co-authored-by: default avatarGiles Cope <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: default avatarFrancisco Aguirre <[email protected]>
Co-authored-by: default avatarLiam Aharon <[email protected]>
Co-authored-by: default avatarKian Paimani <[email protected]>
      3dece311
    • Adrian Catangiu's avatar
      cumulus: add asset-hub-rococo runtime based on asset-hub-kusama and add... · 8b3905d2
      Adrian Catangiu authored 
      
cumulus: add asset-hub-rococo runtime based on asset-hub-kusama and add asset-bridging support to it (#1215)

This commit adds Rococo Asset Hub dedicated runtime so we can test new
features here, before merging them in Kusama Asset Hub.
Also adds one such feature: asset transfer over bridge (Rococo AssetHub
<> Wococo AssetHub)

- clone `asset-hub-kusama-runtime` -> `asset-hub-rococo-runtime`
- make it use Rococo primitives, names, assets, constants, etc
- add asset-transfer-over-bridge support to Rococo AssetHub <> Wococo
AssetHub

Fixes #1128

---------

Co-authored-by: default avatarBranislav Kontur <[email protected]>
Co-authored-by: default avatarjoe petrowski <[email protected]>
Co-authored-by: default avatarFrancisco Aguirre <[email protected]>
      8b3905d2
  19. Oct 16, 2023
  21. Oct 12, 2023
  23. Oct 11, 2023
    • Branislav Kontur's avatar
      Xcm emulator nits (#1649) · cfb29254
      Branislav Kontur authored 
      # Desription

## Summary 

This PR introduces several nits and tweaks to xcm emulator tests for
system parachains.

## Explanation

**Deduplicate `XcmPallet::send(` with root origin code**
- Introduced `send_transact_to_parachain` which could be easily reuse
for scenarios like _governance call from relay chain to parachain_.

**Refactor `send_transact_sudo_from_relay_to_system_para_works`**
- Test covered just one use-case which was moved to the
`do_force_create_asset_from_relay_to_system_para`, so now we can extend
this test with more _governance-like_ senarios.
- Renamed to
`send_transact_as_superuser_from_relay_to_system_para_works`.

**Remove `send_transact_native_from_relay_to_system_para_fails` test**
- This test and/or description is kind of misleading, because system
paras support Native from relay chain by `RelayChainAsNative` with
correct xcm origin.
- It tested only sending on relay chain which should go directly to the
relay chain unit-tests (does not even need to be in xcm emulator level).

## Future directions

Check restructure parachains integration tests
[issue](https://github.com/paritytech/polkadot-sdk/issues/1389) and [PR
with more TODOs](https://github.com/paritytech/polkadot-sdk/pull/1693

).

---------

Co-authored-by: default avatarIgnacio Palacios <[email protected]>
      cfb29254
  25. Oct 10, 2023
  27. Oct 07, 2023
    • Muharem Ismailov's avatar
      Treasury spends various asset kinds (#1333) · cb944dc5
      Muharem Ismailov authored 
      

### Summary 

This PR introduces new dispatchables to the treasury pallet, allowing
spends of various asset types. The enhanced features of the treasury
pallet, in conjunction with the asset-rate pallet, are set up and
enabled for Westend and Rococo.

### Westend and Rococo runtimes.

Polkadot/Kusams/Rococo Treasury can accept proposals for `spends` of
various asset kinds by specifying the asset's location and ID.

#### Treasury Instance New Dispatchables:
- `spend(AssetKind, AssetBalance, Beneficiary, Option<ValidFrom>)` -
propose and approve a spend;
- `payout(SpendIndex)` - payout an approved spend or retry a failed
payout
- `check_payment(SpendIndex)` - check the status of a payout;
- `void_spend(SpendIndex)` - void previously approved spend;
> existing spend dispatchable renamed to spend_local

in this context, the `AssetKind` parameter contains the asset's location
and it's corresponding `asset_id`, for example:
`USDT` on `AssetHub`,
``` rust
location = MultiLocation(0, X1(Parachain(1000)))
asset_id = MultiLocation(0, X2(PalletInstance(50), GeneralIndex(1984)))
```

the `Beneficiary` parameter is a `MultiLocation` in the context of the
asset's location, for example
``` rust
// the Fellowship salary pallet's location / account
FellowshipSalaryPallet = MultiLocation(1, X2(Parachain(1001), PalletInstance(64)))
// or custom `AccountId`
Alice = MultiLocation(0, AccountId32(network: None, id: [1,...]))
```

the `AssetBalance` represents the amount of the `AssetKind` to be
transferred to the `Beneficiary`. For permission checks, the asset
amount is converted to the native amount and compared against the
maximum spendable amount determined by the commanding spend origin.

the `spend` dispatchable allows for batching spends with different
`ValidFrom` arguments, enabling milestone-based spending. If the
expectations tied to an approved spend are not met, it is possible to
void the spend later using the `void_spend` dispatchable.

Asset Rate Pallet provides the conversion rate from the `AssetKind` to
the native balance.

#### Asset Rate Instance Dispatchables:
- `create(AssetKind, Rate)` - initialize a conversion rate to the native
balance for the given asset
- `update(AssetKind, Rate)` - update the conversion rate to the native
balance for the given asset
- `remove(AssetKind)` - remove an existing conversion rate to the native
balance for the given asset

the pallet's dispatchables can be executed by the Root or Treasurer
origins.

### Treasury Pallet

Treasury Pallet can accept proposals for `spends` of various asset kinds
and pay them out through the implementation of the `Pay` trait.

New Dispatchables:
- `spend(Config::AssetKind, AssetBalance, Config::Beneficiary,
Option<ValidFrom>)` - propose and approve a spend;
- `payout(SpendIndex)` - payout an approved spend or retry a failed
payout;
- `check_payment(SpendIndex)` - check the status of a payout;
- `void_spend(SpendIndex)` - void previously approved spend;
> existing spend dispatchable renamed to spend_local

The parameters' types of the `spend` dispatchable exposed via the
pallet's `Config` and allows to propose and accept a spend of a certain
amount.

An approved spend can be claimed via the `payout` within the
`Config::SpendPeriod`. Clients provide an implementation of the `Pay`
trait which can pay an asset of the `AssetKind` to the `Beneficiary` in
`AssetBalance` units.

The implementation of the Pay trait might not have an immediate final
payment status, for example if implemented over `XCM` and the actual
transfer happens on a remote chain.

The `check_status` dispatchable can be executed to update the spend's
payment state and retry the `payout` if the payment has failed.

---------

Co-authored-by: default avatarjoe petrowski <[email protected]>
Co-authored-by: command-bot <>
      cb944dc5
  29. Sep 29, 2023
    • Sebastian Kunert's avatar
      Point documentation links to monorepo (#1741) · 9485b0b4
      Sebastian Kunert authored
      9485b0b4
    • Bastian Köcher's avatar
      Remove kusama and polkadot runtime crates (#1731) · bf90cb0b
      Bastian Köcher authored 
      This pull request is removing the Kusama and Polkadot runtime crates. As
still some crates dependent on the runtime crates, this pull request is
doing some more changes.

- It removes the `hostperfcheck` CLI command. This CLI command could
compare the current node against the standard hardware by doing some
checks. Later we added the hardware benchmark feature to Substrate. This
hardware benchmark is running on every node startup and prints a warning
if the current node is too slow. This makes this CLI command a duplicate
that was also depending on the kusama runtime.

- The pull request is removing the emulated integration tests that were
requiring the Kusama or Polkadot runtime crates.
      bf90cb0b
  31. Sep 27, 2023
  33. Sep 05, 2023
    • joe petrowski's avatar
      Move Relay-Specific Shared Code to One Place (#1193) · a1469180
      joe petrowski authored 
      * add common libs

* asset hubs

* add westend

* bridge hubs

* collectives

* contracts

* emulated tests

* parachain bin

* delete collectives constants and update docs

* integration tests should have apache license (some missing, some needed changing)

* propagate features

* fmt
      a1469180
  35. Sep 01, 2023
    • Ignacio Palacios's avatar
      [xcm-emulator] Improve hygiene and clean up (#1301) · 241601b1
      Ignacio Palacios authored 
      * improve hygiene & clean up

* improve hygiene & clean up - xcm-emulator

* improve hygiene & clean up - common

* improve hygiene & clean up - tests

* improve hygiene & clean up - tests 2

* last hygiene bits

* ".git/.scripts/commands/fmt/fmt.sh"

---------

Co-authored-by: command-bot <>
      241601b1
  37. Aug 31, 2023
    • Bastian Köcher's avatar
      Rename `polkadot-parachain` to `polkadot-parachain-primitives` (#1334) · a33d7922
      Bastian Köcher authored 
      * Rename `polkadot-parachain` to `polkadot-parachain-primitives`

While doing this it also fixes some last `rustdoc` issues and fixes
another Cargo warning related to `pallet-paged-list`.

* Fix compilation

* ".git/.scripts/commands/fmt/fmt.sh"

* Fix XCM docs

---------

Co-authored-by: command-bot <>
      a33d7922
    • Alin Dima's avatar
      backing: move the min votes threshold to the runtime (#1200) · d6af073a
      Alin Dima authored 
      

* move min backing votes const to runtime

also cache it per-session in the backing subsystem

Signed-off-by: default avataralindima <[email protected]>

* add runtime migration

* introduce api versioning for min_backing votes

also enable it for rococo/versi for testing

* also add min_backing_votes runtime calls to statement-distribution

this dependency has been recently introduced by async backing

* remove explicit version runtime API call

this is not needed, as the RuntimeAPISubsystem already takes care
of versioning and will return NotSupported if the version is not
right.

* address review comments

- parametrise backing votes runtime API with session index
- remove RuntimeInfo usage in backing subsystem, as runtime API
caches the min backing votes by session index anyway.
- move the logic for adjusting the configured needed backing votes with the size of the backing group
to a primitives helper.
- move the legacy min backing votes value to a primitives helper.
- mark JoinMultiple error as fatal, since the Canceled (non-multiple) counterpart is also fatal.
- make backing subsystem handle fatal errors for new leaves update.
- add HostConfiguration consistency check for zeroed backing votes threshold
- add cumulus accompanying change

* fix cumulus test compilation

* fix tests

* more small fixes

* fix merge

* bump runtime api version for westend and rollback version for rococo

---------

Signed-off-by: default avataralindima <[email protected]>
Co-authored-by: default avatarJavier Viola <[email protected]>
      d6af073a
  39. Aug 30, 2023
  41. Aug 23, 2023
    • juangirini's avatar
      Companion: restructure macro related exports (#3015) · 8349c8d1
      juangirini authored 
      * restructure macro related exports

* restructure macro related exports

* wip

* wip

* update cargo lock

* refactor RuntimeDebug on unincluded segment

* fmt

* Companion: restructure `benchmarking` macro related exports (#3039)

* wip

* wip

* restructure benchmarking macro related exports

* add cargo lock

---------

Co-authored-by: parity-processbot <>
      8349c8d1
  43. Aug 22, 2023
  45. Aug 19, 2023
  47. Aug 18, 2023
    • Chris Sosnin's avatar
      Asynchronous backing PR (#2300) · 6ef11176
      Chris Sosnin authored 
      

* Update substrate & polkadot

* min changes to make async backing compile

* (async backing) parachain-system: track limitations for unincluded blocks (#2438)

* unincluded segment draft

* read para head from storage proof

* read_para_head -> read_included_para_head

* Provide pub interface

* add errors

* fix unincluded segment update

* BlockTracker -> Ancestor

* add a dmp limit

* Read para head depending on the storage switch

* doc comments

* storage items docs

* add a sanity check on block initialize

* Check watermark

* append to the segment on block finalize

* Move segment update into set_validation_data

* Resolve para head todo

* option watermark

* fix comment

* Drop dmq check

* fix weight

* doc-comments on inherent invariant

* Remove TODO

* add todo

* primitives tests

* pallet tests

* doc comments

* refactor unincluded segment length into a ConsensusHook (#2501)

* refactor unincluded segment length into a ConsensusHook

* add docs

* refactor bandwidth_out calculation

Co-authored-by: default avatarChris Sosnin <[email protected]>

* test for limits from impl

* fmt

* make tests compile

* update comment

* uncomment test

* fix collator test by adding parent to state proof

* patch HRMP watermark rules for unincluded segment

* get consensus-common tests to pass, using unincluded segment

* fix unincluded segment tests

* get all tests passing

* fmt

* rustdoc CI

* aura-ext: limit the number of authored blocks per slot (#2551)

* aura_ext consensus hook

* reverse dependency

* include weight into hook

* fix tests

* remove stray println

Co-authored-by: default avatarChris Sosnin <[email protected]>

* fix test warning

* fix doc link

---------

Co-authored-by: default avatarChris Sosnin <[email protected]>
Co-authored-by: default avatarChris Sosnin <[email protected]>

* parachain-system: ignore go ahead signal once upgrade is processed (#2594)

* handle goahead signal for unincluded segment

* doc comment

* add test

* parachain-system: drop processed messages from inherent data (#2590)

* implement `drop_processed_messages`

* drop messages based on relay parent number

* adjust tests

* drop changes to mqc

* fix comment

* drop test

* drop more dead code

* clippy

* aura-ext: check slot in consensus hook and remove all `CheckInherents` logic (#2658)

* aura-ext: check slot in consensus hook

* convert relay chain slot

* Make relay chain slot duration generic

* use fixed velocity hook for pallets with aura

* purge timestamp inherent

* fix warning

* adjust runtime tests

* fix slots in tests

* Make `xcm-emulator` test pass for new consensus hook (#2722)

* add pallets on_initialize

* tests pass

* add AuraExt on_init

* ".git/.scripts/commands/fmt/fmt.sh"

---------

Co-authored-by: command-bot <>

---------

Co-authored-by: default avatarIgnacio Palacios <[email protected]>

* update polkadot git refs

* CollationGenerationConfig closure is now optional (#2772)

* CollationGenerationConfig closure is now optional

* fix test

* propagate network-protocol-staging feature (#2899)

* Feature Flagging Consensus Hook Type Parameter (#2911)

* First pass

* fmt

* Added as default feature in tomls

* Changed to direct dependency feature

* Dealing with clippy error

* Update pallets/parachain-system/src/lib.rs

Co-authored-by: default avatarasynchronous rob <[email protected]>

---------

Co-authored-by: default avatarasynchronous rob <[email protected]>

* fmt

* bump deps and remove warning

* parachain-system: update RelevantMessagingState according to the unincluded segment (#2948)

* mostly address 2471 with a bug introduced

* adjust relevant messaging state after computing total

* fmt

* max -> min

* fix test implementation of xcmp source

* add test

* fix test message sending logic

* fix + test

* add more to unincluded segment test

* fmt

---------

Co-authored-by: default avatarChris Sosnin <[email protected]>

* Integrate new Aura / Parachain Consensus Logic in Parachain-Template / Polkadot-Parachain (#2864)

* add a comment

* refactor client/service utilities

* deprecate start_collator

* update parachain-template

* update test-service in the same way

* update polkadot-parachain crate

* fmt

* wire up new SubmitCollation message

* some runtime utilities for implementing unincluded segment runtime APIs

* allow parachains to configure their level of sybil-resistance when starting the network

* make aura-ext compile

* update to specify sybil resistance levels

* fmt

* specify relay chain slot duration in milliseconds

* update Aura to explicitly produce Send futures

also, make relay_chain_slot_duration a Duration

* add authoring duration to basic collator and document params

* integrate new basic collator into parachain-template

* remove assert_send used for testing

* basic-aura: only author when parent included

* update polkadot-parachain-bin

* fmt

* some fixes

* fixes

* add a RelayNumberMonotonicallyIncreases

* add a utility function for initializing subsystems

* some logging for timestamp adjustment

* fmt

* some fixes for lookahead collator

* add a log

* update `find_potential_parents` to account for sessions

* bound the loop

* restore & deprecate old start_collator and start_full_node functions.

* remove unnecessary await calls

* fix warning

* clippy

* more clippy

* remove unneeded logic

* ci

* update comment

Co-authored-by: default avatarMarcin S. <[email protected]>

* (async backing) restore `CheckInherents` for backwards-compatibility (#2977)

* bring back timestamp

* Restore CheckInherents

* revert to empty CheckInherents

* make CheckInherents optional

* attempt

* properly end system blocks

* add some more comments

* ignore failing system parachain tests

* update refs after main feature branch merge

* comment out the offending tests because CI runs ignored tests

* fix warnings

* fmt

* revert to polkadot master

* cargo update -p polkadot-primitives -p sp-io

---------

Co-authored-by: default avatarasynchronous rob <[email protected]>
Co-authored-by: default avatarIgnacio Palacios <[email protected]>
Co-authored-by: default avatarBradley Olson <[email protected]>
Co-authored-by: default avatarMarcin S. <[email protected]>
Co-authored-by: default avatareskimor <[email protected]>
Co-authored-by: default avatarAndronik <[email protected]>
      6ef11176
    • Branislav Kontur's avatar
      xcm-emulator mini fix (#3031) · 33046b6e
      Branislav Kontur authored
      33046b6e
  49. Aug 10, 2023
    • Ignacio Palacios's avatar
      Replicate `e2e` integration test as `emulated` (#2958) · eadfbca3
      Ignacio Palacios authored 
      

* Allow functions to work over both parachains and relay chains

* additional references

* import

* backup

* refactoring para and relay traits

* use runtime crates to build types

* decouple ProcessMessage

* decouple ProcessMessage 2

* dmp and xcmp handlers decouple

* backup

* refactor done

* common int values working

* added global ext with mutex

* works for two mutex

* single mutex and remove condvar

* global test ext done

* failing moving test_ext because relay block num

* relay_block_number issue fixed

* backup

* Test working with assertions

* assertions get Test as arg

* DispatchArgs as generic

* clean up

* backup

* teleports for asset-hub-kusama done

* improve assert_expected_events macro

* rename Test generics

* check assertions for tuples

* test assertions redone

* reserve_transfer_assets done

* send transact done

* hrmp test for paras

* hrmp channels test done

* hrmp channels test done 2

* before modifying test dispatch

* reserve tests done & Test dispatch fixed

* reserve transfer local asset

* force_create_and_mint_asset

* force create and mint done

* tests done

* fix imports in common

* common events refactored

* add option to events attributes

* asset-hub-polkadot tests done

* asset-hub-westend half done

* relay chain events move to common

* remove failing send tests for asset-hub-westend

* added events to bridge-hub-rococo

* added events to collectives-polkadot

* cargo clean up

* fix asset-hub-westend tests

* ".git/.scripts/commands/fmt/fmt.sh"

* fix clippy

* ".git/.scripts/commands/fmt/fmt.sh"

* Removed unnecessary deps

* Extracted some commonality for Kusama/Polkadot (which will be reused also for BridgeHubs) (#2971)

* Extracted some commonality for Kusama/Polkadot (which will be reused also for BridgeHubs)

* AssetHubRococo should better use AssetHubKusama runtime

* add fund_account

---------

Co-authored-by: default avatarNachoPal <[email protected]>

* address comments

* rename event assertion helpers

* clean comments

* address comments 2

* ".git/.scripts/commands/fmt/fmt.sh"

---------

Co-authored-by: default avatarGiles Cope <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: default avatarBranislav Kontur <[email protected]>
      eadfbca3
  51. Aug 02, 2023
  53. Jul 24, 2023
  55. Jul 21, 2023
    • Branislav Kontur's avatar
      Asset conversion nits (#2860) · 8171890f
      Branislav Kontur authored 
      

* [asset-conv] Unused Balances type

* [asset-conv] native asset change

* Dedicated `AssetBalance` type for `pallet_assets` instances

* Improved local vs foreign asset handling + test for not allowing pool_assets in pool

* Removed `into_multiasset_id`

* Fix

* Refactor

* Fixed create_pool for benchmark with LocalAndForeignAssets (finally found it)

* ".git/.scripts/commands/fmt/fmt.sh"

* Revert

* fmt

* Migrates pools with `MultiLocation { parents: 0, interior: Here }` to `MultiLocation { parents: 1, interior: Here }`

* Allow `set_storage` for `AllowMultiAssetPools` / `LiquidityWithdrawalFee`

* Benchmarks work

* Removed comment + more defensive migration

* `T::Currency::transfer` -> `Balances::transfer_all` in migration

* Change pool_id in migration

* Update parachains/runtimes/assets/asset-hub-westend/src/lib.rs

* Bump substrate (manually)

* Bump polkadot

* Fixes from polkadot + clippy

* Fix for xcm-emulator tests (thank you Nacho)

---------

Co-authored-by: command-bot <>
Co-authored-by: default avatarJegor Sidorenko <[email protected]>
      8171890f
  57. Jul 12, 2023
    • Michal Kucharczyk's avatar
      `GenesisBuild<T,I>` deprecated. `BuildGenesisConfig` added (#2757) · 94d2e4bc
      Michal Kucharczyk authored 
      * GenesisBuild<T,I> deprecated. BuildGenesisConfig added

* ".git/.scripts/commands/fmt/fmt.sh"

* integration-tests/emulated: ..Default::default added to genesis configs

* Cargo.lock updated

* Cargo.lock updated

* update lockfile for {"polkadot", "substrate"}

* clippy fixes

* clippy fixes

* clippy fixes again

---------

Co-authored-by: command-bot <>
      94d2e4bc
  59. Jul 05, 2023
    • Ignacio Palacios's avatar
      Add Bridges to `xcm-emulator` (#2812) · f6b33fe9
      Ignacio Palacios authored 
      

* rename bridge hub + BridgeMessages type

* bridge base

* bridge string approach

* add decl_test_bridges macro

* outbound lanes on the way

* get & dispatch mock bridge done

* fix bridge errors + log::debug for messages

* clean up

* update source OutboundLaneData

* rococo & wococo added

* sender_receiver_accounts_parameter_types macro

* sender_receiver_accounts_parameter_types macro 2

* fixed multi parachain + example on the way

* working but router error

* bridge working

* refactor NetworkComponent

* make it generic

* working as generic

* clean up

* last bit

* ".git/.scripts/commands/fmt/fmt.sh"

* fix bridge hub handler name

* ".git/.scripts/commands/fmt/fmt.sh"

* add AssetConversion back for AssetHubWestend

* Update xcm/xcm-emulator/src/lib.rs

Co-authored-by: default avatarSquirrel <[email protected]>

* add LaneId wrapper

* update substrate

* fix wrapper conversion

* remove duplicate in workspace

* Revert "update substrate"

This reverts commit 92e8f201ae433aed3f70b998ebd4c23d9168d0ee.

* ".git/.scripts/commands/fmt/fmt.sh"

---------

Co-authored-by: command-bot <>
Co-authored-by: default avatarSquirrel <[email protected]>
      f6b33fe9
  61. Jun 23, 2023
    • Squirrel's avatar
      Asset Conversion release to westmint (#2148) · 5487ce76
      Squirrel authored 
      

* Dex and payment by dex in westmint

* Wrap U256 type for now

(to support required traits.)

* cargo fmt

* We can now use U256

* Rename PromotedBalance

* name change

* Updating the code to master.

TODO: handle dust!

* cargo fmt

* Minimising changes and step towards getting benchmarks compiling

(still a From<u32> bound in the pallet)

* minimise diff

* Update parachains/runtimes/assets/westmint/src/lib.rs

Co-authored-by: default avatarJegor Sidorenko <[email protected]>

* Update parachains/runtimes/assets/westmint/src/lib.rs

Co-authored-by: default avatarJegor Sidorenko <[email protected]>

* Update parachains/common/src/impls.rs

Co-authored-by: default avatarJegor Sidorenko <[email protected]>

* Fix benchmark build

* Add in AssetConversionAPI

* Handle dust

* cargo fmt

* Don't need to be explicit that it's AccountId32

* remove pool setup fee

(Asset deposit fees are a sufficient anti-spam measure)

* More natural way to specify native

* cargo fmt

* Update parachains/runtimes/assets/westmint/src/lib.rs

* Additional required impls

* either form of multilocation should be acceptable.

* add call filter exclusion

* Fix typo & try_convert now fails if native is converted

* merge master fixup

* Fix: HoldReason should be there.

* Box MultiAssetId

Otherwise it blows out the Call enum memory size.

* cargo fmt

* update lock file

* add std feature, update lock file

* need to turn on std on common

* adding in westmint tests

* WeightToFee must be from the destination chain.

* cargo fmt

* account for higher ED on westmint

* type removed as not used

* cargo fmt

* remove unused import

* minimising diff

* import needed only with feature enabled

* use multilocation contains

* move the impls to separate file

* simplify on conversion

* simplify on reverse conversion also.

* rename var

* clippy

* removed dead code

* cargo fmt

* Use pay by swap

* review suggestions

* cargo fmt

* Update parachains/runtimes/assets/asset-hub-westend/src/lib.rs

Co-authored-by: default avatarjoe petrowski <[email protected]>

* add benchmarks for new assets pallet

* revert common/src changes

* need a concrete id

* more fixes

* lock

---------

Co-authored-by: default avatarJegor Sidorenko <[email protected]>
Co-authored-by: default avatarjoepetrowski <[email protected]>
Co-authored-by: default avatarjoe petrowski <[email protected]>
      5487ce76
  63. Jun 16, 2023
  65. Jun 12, 2023
  67. Jun 05, 2023