- Nov 13, 2023
-
-
Adrian Catangiu authored
## Motivation `pallet-xcm` is the main user-facing interface for XCM functionality, including assets manipulation functions like `teleportAssets()` and `reserve_transfer_assets()` calls. While `teleportAsset()` works both ways, `reserve_transfer_assets()` works only for sending reserve-based assets to a remote destination and beneficiary when the reserve is the _local chain_. ## Solution This PR enhances `pallet_xcm::(limited_)reserve_withdraw_assets` to support transfers when reserves are other chains. This will allow complete, **bi-directional** reserve-based asset transfers user stories using `pallet-xcm`. Enables following scenarios: - transferring assets with local reserve (was previously supported iff asset used as fee also had local reserve - now it works in all cases), - transferring assets with reserve on destination, - transferring assets with reserve on remote/third-party chain (iff assets and fees have same remote reserve), - transferring assets with reserve different than the reserve of the asset to be used as fees - meaning can be used to transfer random asset with local/dest reserve while using DOT for fees on all involved chains, even if DOT local/dest reserve doesn't match asset reserve, - transferring assets with any type of local/dest reserve while using fees which can be teleported between involved chains. All of the above is done by pallet inner logic without the user having to specify which scenario/reserves/teleports/etc. The correct scenario and corresponding XCM programs are identified, and respectively, built automatically based on runtime configuration of trusted teleporters and trusted reserves. #### Current limitations: - while `fees` and "non-fee" `assets` CAN have different reserves (or fees CAN be teleported), the remaining "non-fee" `assets` CANNOT, among themselves, have different reserve locations (this is also implicitly enforced by `MAX_ASSETS_FOR_TRANSFER=2`, but this can be safely increased in the future). - `fees` and "non-fee" `assets` CANNOT have **different remote** reserves (this could also be supported in the future, but adds even more complexity while possibly not being worth it - we'll see what the future holds). Fixes https://github.com/paritytech/polkadot-sdk/issues/1584 Fixes https://github.com/paritytech/polkadot-sdk/issues/2055 --------- Co-authored-by: Francisco Aguirre <[email protected]> Co-authored-by: Branislav Kontur <[email protected]>
-
- Nov 08, 2023
-
-
Michal Kucharczyk authored
Some legacy tests were mistakenly merged in #1256 for `emulated-integration-tests-common` crate. This PR fixes the function name `build_genesis_storage` (no need to use `legacy` suffix, even though the genesis is built from `RuntimeGenesisConfig`).
-
Ignacio Palacios authored
Closes: - #1383 - Declared chains can be now be imported and reused in a different crate. - Chain declaration are now generic over a generic type `N` (the Network) - #1389 - Solved #1383, chains and networks declarations can be restructure to avoid having to compile all chains when running integrations tests where are not needed. - Chains are now declared on its own crate (removed from `integration-tests-common`) - Networks are now declared on its own crate (removed from `integration-tests-common`) - Integration tests will import only the relevant Network crate - `integration-tests-common` is renamed to `emulated-integration-tests-common` All this is necessary to be able to implement what is described here: https://github.com/paritytech/roadmap/issues/56#issuecomment-1777010553 --------- Co-authored-by: command-bot <>
-
Adrian Catangiu authored
`bridge-hub-westend-runtime` was added to cumulus/parachains, but wasn't hooked up to xcm-emulator to run tests against it. This commit addresses that ^. Signed-off-by: Adrian Catangiu <[email protected]>
-
- Nov 06, 2023
-
-
Michal Kucharczyk authored
This PR updates the version of `serde_json` to `1.0.108` throughout the codebase.
-
- Nov 05, 2023
-
-
Michal Kucharczyk authored
This PR prepares chains specs for _native-runtime-free_ world. This PR has following changes: - `substrate`: - adds support for: - JSON based `GenesisConfig` to `ChainSpec` allowing interaction with runtime `GenesisBuilder` API. - interacting with arbitrary runtime wasm blob to[ `chain-spec-builder`](https://github.com/paritytech/substrate/blob/3ef576eaeb3f42610e85daecc464961cf1295570/bin/utils/chain-spec-builder/src/lib.rs#L46) command line util, - removes [`code`](https://github.com/paritytech/substrate/blob/3ef576eaeb3f42610e85daecc464961cf1295570/frame/system/src/lib.rs#L660) from `system_pallet` - adds `code` to the `ChainSpec` - deprecates [`ChainSpec::from_genesis`](https://github.com/paritytech/substrate/blob/3ef576eaeb3f42610e85daecc464961cf1295570/client/chain-spec/src/chain_spec.rs#L263), but also changes the signature of this method extending it with `code` argument. [`ChainSpec::builder()`](https://github.com/paritytech/substrate/blob/20bee680ed098be7239cf7a6b804cd4de267983e/client/chain-spec/src/chain_spec.rs#L507 ) should be used instead. - `polkadot`: - all references to `RuntimeGenesisConfig` in `node/service` are removed, - all `(kusama|polkadot|versi|rococo|wococo)_(staging|dev)_genesis_config` functions now return the JSON patch for default runtime `GenesisConfig`, - `ChainSpecBuilder` is used, `ChainSpec::from_genesis` is removed, - `cumulus`: - `ChainSpecBuilder` is used, `ChainSpec::from_genesis` is removed, - _JSON_ patch configuration used instead of `RuntimeGenesisConfig struct` in all chain specs. --------- Co-authored-by: command-bot <> Co-authored-by: Javier Viola <[email protected]> Co-authored-by: Davide Galassi <[email protected]> Co-authored-by: Francisco Aguirre <[email protected]> Co-authored-by: Kevin Krone <[email protected]> Co-authored-by: Bastian Köcher <[email protected]>
-
- Nov 02, 2023
-
-
Oliver Tale-Yazdi authored
(imported from https://github.com/paritytech/cumulus/pull/2157) ## Changes This MR refactores the XCMP, Parachains System and DMP pallets to use the [MessageQueue](https://github.com/paritytech/substrate/pull/12485) for delayed execution of incoming messages. The DMP pallet is entirely replaced by the MQ and thereby removed. This allows for PoV-bounded execution and resolves a number of issues that stem from the current work-around. All System Parachains adopt this change. The most important changes are in `primitives/core/src/lib.rs`, `parachains/common/src/process_xcm_message.rs`, `pallets/parachain-system/src/lib.rs`, `pallets/xcmp-queue/src/lib.rs` and the runtime configs. ### DMP Queue Pallet The pallet got removed and its logic refactored into parachain-system. Overweight message management can be done directly through the MQ pallet. Final undeployment migrations are provided by `cumulus_pallet_dmp_queue::UndeployDmpQueue` and `DeleteDmpQueue` that can be configured with an aux config trait like: ```rust parameter_types! { pub const DmpQueuePalletName: &'static str = \"DmpQueue\" < CHANGE ME; pub const RelayOrigin: AggregateMessageOrigin = AggregateMessageOrigin::Parent; } impl cumulus_pallet_dmp_queue::MigrationConfig for Runtime { type PalletName = DmpQueuePalletName; type DmpHandler = frame_support::traits::EnqueueWithOrigin<MessageQueue, RelayOrigin>; type DbWeight = <Runtime as frame_system::Config>::DbWeight; } // And adding them to your Migrations tuple: pub type Migrations = ( ... cumulus_pallet_dmp_queue::UndeployDmpQueue<Runtime>, cumulus_pallet_dmp_queue::DeleteDmpQueue<Runtime>, ); ``` ### XCMP Queue pallet Removed all dispatch queue functionality. Incoming XCMP messages are now either: Immediately handled if they are Signals, enqueued into the MQ pallet otherwise. New config items for the XCMP queue pallet: ```rust /// The actual queue implementation that retains the messages for later processing. type XcmpQueue: EnqueueMessage<ParaId>; /// How a XCM over HRMP from a sibling parachain should be processed. type XcmpProcessor: ProcessMessage<Origin = ParaId>; /// The maximal number of suspended XCMP channels at the same time. #[pallet::constant] type MaxInboundSuspended: Get<u32>; ``` How to configure those: ```rust // Use the MessageQueue pallet to store messages for later processing. The `TransformOrigin` is needed since // the MQ pallet itself operators on `AggregateMessageOrigin` but we want to enqueue `ParaId`s. type XcmpQueue = TransformOrigin<MessageQueue, AggregateMessageOrigin, ParaId, ParaIdToSibling>; // Process XCMP messages from siblings. This is type-safe to only accept `ParaId`s. They will be dispatched // with origin `Junction::Sibling(…)`. type XcmpProcessor = ProcessFromSibling< ProcessXcmMessage< AggregateMessageOrigin, xcm_executor::XcmExecutor<xcm_config::XcmConfig>, RuntimeCall, >, >; // Not really important what to choose here. Just something larger than the maximal number of channels. type MaxInboundSuspended = sp_core::ConstU32<1_000>; ``` The `InboundXcmpStatus` storage item was replaced by `InboundXcmpSuspended` since it now only tracks inbound queue suspension and no message indices anymore. Now only sends the most recent channel `Signals`, as all prio ones are out-dated anyway. ### Parachain System pallet For `DMP` messages instead of forwarding them to the `DMP` pallet, it now pushes them to the configured `DmpQueue`. The message processing which was triggered in `set_validation_data` is now being done by the MQ pallet `on_initialize`. XCMP messages are still handed off to the `XcmpMessageHandler` (XCMP-Queue pallet) - no change here. New config items for the parachain system pallet: ```rust /// Queues inbound downward messages for delayed processing. /// /// Analogous to the `XcmpQueue` of the XCMP queue pallet. type DmpQueue: EnqueueMessage<AggregateMessageOrigin>; ``` How to configure: ```rust /// Use the MQ pallet to store DMP messages for delayed processing. type DmpQueue = MessageQueue; ``` ## Message Flow The flow of messages on the parachain side. Messages come in from the left via the `Validation Data` and finally end up at the `Xcm Executor` on the right. ![Untitled (1)](https://github.com/paritytech/cumulus/assets/10380170/6cf8b377-88c9-4aed-96df-baace266e04d) ## Further changes - Bumped the default suspension, drop and resume thresholds in `QueueConfigData::default()`. - `XcmpQueue::{suspend_xcm_execution, resume_xcm_execution}` errors when they would be a noop. - Properly validate the `QueueConfigData` before setting it. - Marked weight files as auto-generated so they wont auto-expand in the MR files view. - Move the `hypothetical` asserts to `frame_support` under the name `experimental_hypothetically` Questions: - [ ] What about the ugly `#[cfg(feature = \"runtime-benchmarks\")]` in the runtimes? Not sure how to best fix. Just having them like this makes tests fail that rely on the real message processor when the feature is enabled. - [ ] Need a good weight for `MessageQueueServiceWeight`. The scheduler already takes 80% so I put it to 10% but that is quite low. TODO: - [x] Remove c&p code after https://github.com/paritytech/polkadot/pull/6271 - [x] Use `HandleMessage` once it is public in Substrate - [x] fix `runtime-benchmarks` feature https://github.com/paritytech/polkadot/pull/6966 - [x] Benchmarks - [x] Tests - [ ] Migrate `InboundXcmpStatus` to `InboundXcmpSuspended` - [x] Possibly cleanup Migrations (DMP+XCMP) - [x] optional: create `TransformProcessMessageOrigin` in Substrate and replace `ProcessFromSibling` - [ ] Rerun weights on ref HW --------- Signed-off-by: Oliver Tale-Yazdi <[email protected]> Co-authored-by: Liam Aharon <[email protected]> Co-authored-by: joe petrowski <[email protected]> Co-authored-by: Kian Paimani <[email protected]> Co-authored-by: command-bot <>
-
- Nov 01, 2023
-
-
Branislav Kontur authored
## Summary Asset bridging support for AssetHub**Rococo** <-> AssetHub**Wococo** was added [here](https://github.com/paritytech/polkadot-sdk/pull/1215), so now we aim to bridge AssetHub**Rococo** and AssetHub**Westend**. (And perhaps retire AssetHubWococo and the Wococo chains). ## Solution **bridge-hub-westend-runtime** - added new runtime as a copy of `bridge-hub-rococo-runtime` - added support for bridging to `BridgeHubRococo` - added tests and benchmarks **bridge-hub-rococo-runtime** - added support for bridging to `BridgeHubWestend` - added tests and benchmarks - internal refactoring by splitting bridge configuration per network, e.g., `bridge_to_whatevernetwork_config.rs`. **asset-hub-rococo-runtime** - added support for asset bridging to `AssetHubWestend` (allows to receive only WNDs) - added new xcm router for `Westend` - added tests and benchmarks **asset-hub-westend-runtime** - added support for asset bridging to `AssetHubRococo` (allows to receive only ROCs) - added new xcm router for `Rococo` - added tests and benchmarks ## Deployment All changes will be deployed as a part of https://github.com/paritytech/polkadot-sdk/issues/1988. ## TODO - [x] benchmarks for all pallet instances - [x] integration tests - [x] local run scripts Relates to: https://github.com/paritytech/parity-bridges-common/issues/2602 Relates to: https://github.com/paritytech/polkadot-sdk/issues/1988 --------- Co-authored-by: command-bot <> Co-authored-by: Adrian Catangiu <[email protected]> Co-authored-by: joe petrowski <[email protected]>
-
- Oct 25, 2023
-
-
Branislav Kontur authored
[testnet] Align testnet system parachain runtimes using `RelayTreasuryLocation` and `SystemParachains` in the same way (#2023) This PR addresses several issues: - simplify referencing `RelayTreasuryLocation` without needing additional `RelayTreasury` struct - fix for referencing `SystemParachains` from parachain with `parents: 1` instead of `parents: 0` - removed hard-coded constants and fix tests for `asset-hub-rococo` which was merged to master after https://github.com/paritytech/polkadot-sdk/pull/1726 --------- Co-authored-by: command-bot <>
-
- Oct 23, 2023
-
-
Branislav Kontur authored
This PR does not introduce any functional changes to the existing code, it merely addresses several minor refactors: - Moving bridging pallets to separate files. - Improving the readability and naming of weight files for bridging pallets and bridging pallet instances. The reason for this refactor is to facilitate easier plugin integration for the upcoming bridge between Rococo and Westend. --------- Co-authored-by: command-bot <>
-
- Oct 20, 2023
-
-
Francisco Aguirre authored
Removed some debug logs
-
- Oct 18, 2023
-
-
Keith Yeung authored
Combination of paritytech/polkadot#7005, its addon PR paritytech/polkadot#7585 and its companion paritytech/cumulus#2433. This PR introduces a new XcmFeesToAccount struct which implements the `FeeManager` trait, and assigns this struct as the `FeeManager` in the XCM config for all runtimes. The struct simply deposits all fees handled by the XCM executor to a specified account. In all runtimes, the specified account is configured as the treasury account. XCM __delivery__ fees are now being introduced (unless the root origin is sending a message to a system parachain on behalf of the originating chain). # Note for reviewers Most file changes are tests that had to be modified to account for the new fees. Main changes are in: - cumulus/pallets/xcmp-queue/src/lib.rs <- To make it track the delivery fees exponential factor - polkadot/xcm/xcm-builder/src/fee_handling.rs <- Added. Has the FeeManager implementation - All runtime xcm_config files <- To add the FeeManager to the XCM configuration # Important note After this change, instructions that create and send a new XCM (Query*, Report*, ExportMessage, InitiateReserveWithdraw, InitiateTeleport, DepositReserveAsset, TransferReserveAsset, LockAsset and RequestUnlock) will require the corresponding origin account in the origin register to pay for transport delivery fees, and the onward message will fail to be sent if the origin account does not have the required amount. This delivery fee is on top of what we already collect as tx fees in pallet-xcm and XCM BuyExecution fees! Wallet UIs that want to expose the new delivery fee can do so using the formula: ``` delivery_fee_factor * (base_fee + encoded_msg_len * per_byte_fee) ``` where the delivery fee factor can be obtained from the corresponding pallet based on which transport you are using (UMP, HRMP or bridges), the base fee is a constant, the encoded message length from the message itself and the per byte fee is the same as the configured per byte fee for txs (i.e. `TransactionByteFee`). --------- Co-authored-by: Branislav Kontur <[email protected]> Co-authored-by: joe petrowski <[email protected]> Co-authored-by: Giles Cope <[email protected]> Co-authored-by: command-bot <> Co-authored-by: Francisco Aguirre <[email protected]> Co-authored-by: Liam Aharon <[email protected]> Co-authored-by: Kian Paimani <[email protected]>
-
Adrian Catangiu authored
cumulus: add asset-hub-rococo runtime based on asset-hub-kusama and add asset-bridging support to it (#1215) This commit adds Rococo Asset Hub dedicated runtime so we can test new features here, before merging them in Kusama Asset Hub. Also adds one such feature: asset transfer over bridge (Rococo AssetHub <> Wococo AssetHub) - clone `asset-hub-kusama-runtime` -> `asset-hub-rococo-runtime` - make it use Rococo primitives, names, assets, constants, etc - add asset-transfer-over-bridge support to Rococo AssetHub <> Wococo AssetHub Fixes #1128 --------- Co-authored-by: Branislav Kontur <[email protected]> Co-authored-by: joe petrowski <[email protected]> Co-authored-by: Francisco Aguirre <[email protected]>
-
- Oct 16, 2023
-
-
Ignacio Palacios authored
Make System Parachain trusted Teleporters of each other. Migration of https://github.com/paritytech/cumulus/pull/2842 --------- Co-authored-by: command-bot <> Co-authored-by: joe petrowski <[email protected]>
-
- Oct 12, 2023
-
-
Tsvetomir Dimitrov authored
Exposes disabled validators list via a runtime API. --------- Co-authored-by: ordian <[email protected]> Co-authored-by: ordian <[email protected]>
-
- Oct 11, 2023
-
-
Branislav Kontur authored
# Desription ## Summary This PR introduces several nits and tweaks to xcm emulator tests for system parachains. ## Explanation **Deduplicate `XcmPallet::send(` with root origin code** - Introduced `send_transact_to_parachain` which could be easily reuse for scenarios like _governance call from relay chain to parachain_. **Refactor `send_transact_sudo_from_relay_to_system_para_works`** - Test covered just one use-case which was moved to the `do_force_create_asset_from_relay_to_system_para`, so now we can extend this test with more _governance-like_ senarios. - Renamed to `send_transact_as_superuser_from_relay_to_system_para_works`. **Remove `send_transact_native_from_relay_to_system_para_fails` test** - This test and/or description is kind of misleading, because system paras support Native from relay chain by `RelayChainAsNative` with correct xcm origin. - It tested only sending on relay chain which should go directly to the relay chain unit-tests (does not even need to be in xcm emulator level). ## Future directions Check restructure parachains integration tests [issue](https://github.com/paritytech/polkadot-sdk/issues/1389) and [PR with more TODOs](https://github.com/paritytech/polkadot-sdk/pull/1693 ). --------- Co-authored-by: Ignacio Palacios <[email protected]>
-
- Oct 10, 2023
-
-
Branislav Kontur authored
[xcm] Use `Weight::MAX` for `reserve_asset_deposited`, `receive_teleported_asset` benchmarks (#1726) # Description ## Summary Previously, the `pallet_xcm::do_reserve_transfer_assets` and `pallet_xcm::do_teleport_assets` functions relied on weight estimation for remote chain execution, which was based on guesswork derived from the local chain. This approach led to complications for runtimes that did not provide or support specific [XCM configurations](https://github.com/paritytech/polkadot-sdk/blob/7cbe0c76ef8fd2aabf9f07de0156941ce3ed44b0/polkadot/xcm/xcm-executor/src/config.rs#L43-L47) for `IsReserve` or `IsTeleporter`. Consequently, such runtimes had to resort to implementing hard-coded weights for XCM instructions like `reserve_asset_deposited` or `receive_teleported_asset` to support extrinsics such as `pallet_xcm::reserve_transfer_assets` and `pallet_xcm::teleport_assets`, which depended on remote weight estimation. The issue of remote weight estimation was addressed and resolved by [Pull Request #1645](https://github.com/paritytech/polkadot-sdk/pull/1645), which removed the need for remote weight estimation. ## Solution As a continuation of this improvement, the current PR proposes further cleanup by removing unnecessary hard-coded values and rectifying benchmark results with `Weight::MAX` that previously used `T::BlockWeights::get().max_block` as an override for unsupported XCM instructions like `ReserveAssetDeposited` and `ReceiveTeleportedAsset`. ## Questions - [x] Can we remove now also `Hardcoded till the XCM pallet is fixed` for `deposit_asset`? E.g. for AssetHubKusama [here](https://github.com/paritytech/polkadot-sdk/blob/7cbe0c76ef8fd2aabf9f07de0156941ce3ed44b0/cumulus/parachains/runtimes/assets/asset-hub-kusama/src/weights/xcm/mod.rs#L129-L134) - [x] Are comments like [this](https://github.com/paritytech/polkadot-sdk/blob/7cbe0c76ef8fd2aabf9f07de0156941ce3ed44b0/polkadot/runtime/kusama/src/weights/xcm/mod.rs#L94) `// Kusama doesn't support ReserveAssetDeposited, so this benchmark has a default weight` still relevant? Shouldnt be removed/changed? ## TODO - [x] `bench bot` regenerate xcm weights for all runtimes - [x] remove hard-coded stuff from system parachain weight files - [ ] when merged, open `polkadot-fellow/runtimes` PR ## References Fixes #1132 Closes #1132 Old polkadot repo [PR](https://github.com/paritytech/polkadot/pull/7546) --------- Co-authored-by: command-bot <>
-
- Oct 07, 2023
-
-
Muharem Ismailov authored
### Summary This PR introduces new dispatchables to the treasury pallet, allowing spends of various asset types. The enhanced features of the treasury pallet, in conjunction with the asset-rate pallet, are set up and enabled for Westend and Rococo. ### Westend and Rococo runtimes. Polkadot/Kusams/Rococo Treasury can accept proposals for `spends` of various asset kinds by specifying the asset's location and ID. #### Treasury Instance New Dispatchables: - `spend(AssetKind, AssetBalance, Beneficiary, Option<ValidFrom>)` - propose and approve a spend; - `payout(SpendIndex)` - payout an approved spend or retry a failed payout - `check_payment(SpendIndex)` - check the status of a payout; - `void_spend(SpendIndex)` - void previously approved spend; > existing spend dispatchable renamed to spend_local in this context, the `AssetKind` parameter contains the asset's location and it's corresponding `asset_id`, for example: `USDT` on `AssetHub`, ``` rust location = MultiLocation(0, X1(Parachain(1000))) asset_id = MultiLocation(0, X2(PalletInstance(50), GeneralIndex(1984))) ``` the `Beneficiary` parameter is a `MultiLocation` in the context of the asset's location, for example ``` rust // the Fellowship salary pallet's location / account FellowshipSalaryPallet = MultiLocation(1, X2(Parachain(1001), PalletInstance(64))) // or custom `AccountId` Alice = MultiLocation(0, AccountId32(network: None, id: [1,...])) ``` the `AssetBalance` represents the amount of the `AssetKind` to be transferred to the `Beneficiary`. For permission checks, the asset amount is converted to the native amount and compared against the maximum spendable amount determined by the commanding spend origin. the `spend` dispatchable allows for batching spends with different `ValidFrom` arguments, enabling milestone-based spending. If the expectations tied to an approved spend are not met, it is possible to void the spend later using the `void_spend` dispatchable. Asset Rate Pallet provides the conversion rate from the `AssetKind` to the native balance. #### Asset Rate Instance Dispatchables: - `create(AssetKind, Rate)` - initialize a conversion rate to the native balance for the given asset - `update(AssetKind, Rate)` - update the conversion rate to the native balance for the given asset - `remove(AssetKind)` - remove an existing conversion rate to the native balance for the given asset the pallet's dispatchables can be executed by the Root or Treasurer origins. ### Treasury Pallet Treasury Pallet can accept proposals for `spends` of various asset kinds and pay them out through the implementation of the `Pay` trait. New Dispatchables: - `spend(Config::AssetKind, AssetBalance, Config::Beneficiary, Option<ValidFrom>)` - propose and approve a spend; - `payout(SpendIndex)` - payout an approved spend or retry a failed payout; - `check_payment(SpendIndex)` - check the status of a payout; - `void_spend(SpendIndex)` - void previously approved spend; > existing spend dispatchable renamed to spend_local The parameters' types of the `spend` dispatchable exposed via the pallet's `Config` and allows to propose and accept a spend of a certain amount. An approved spend can be claimed via the `payout` within the `Config::SpendPeriod`. Clients provide an implementation of the `Pay` trait which can pay an asset of the `AssetKind` to the `Beneficiary` in `AssetBalance` units. The implementation of the Pay trait might not have an immediate final payment status, for example if implemented over `XCM` and the actual transfer happens on a remote chain. The `check_status` dispatchable can be executed to update the spend's payment state and retry the `payout` if the payment has failed. --------- Co-authored-by: joe petrowski <[email protected]> Co-authored-by: command-bot <>
-
- Sep 29, 2023
-
-
Sebastian Kunert authored
-
Bastian Köcher authored
This pull request is removing the Kusama and Polkadot runtime crates. As still some crates dependent on the runtime crates, this pull request is doing some more changes. - It removes the `hostperfcheck` CLI command. This CLI command could compare the current node against the standard hardware by doing some checks. Later we added the hardware benchmark feature to Substrate. This hardware benchmark is running on every node startup and prints a warning if the current node is too slow. This makes this CLI command a duplicate that was also depending on the kusama runtime. - The pull request is removing the emulated integration tests that were requiring the Kusama or Polkadot runtime crates.
-
- Sep 28, 2023
-
-
Dónal Murray authored
Update the HRMP pallet to use field names for Event variants to improve metadata for a better client experience. Event variants are now structs instead of unnamed tuples. Partially implements Substrate issue [9903](https://github.com/paritytech/substrate/issues/9903) which doesn't appear to have been moved to the monorepo.
-
- Sep 27, 2023
-
-
Chris Sosnin authored
- Async-backing related primitives are stable `primitives::v6` - Async-backing API is now part of `api_version(7)` - It's enabled on Rococo and Westend runtimes --------- Signed-off-by: Andrei Sandu <[email protected]> Co-authored-by: Andrei Sandu <[email protected]>
-
- Sep 20, 2023
-
-
Muharem Ismailov authored
The Ambassador Program on Polkadot Collectives Parachain The Polkadot Ambassador Program has existed for a while; more information can be found [here](https://wiki.polkadot.network/docs/ambassadors). In this PR, the program is being brought on chain. ### On Chain Structure The on-chain program consists of nine ranks, divided into four categories ([full list](https://github.com/paritytech/cumulus/blob/c238fb26b75569a11abb57437fd14acd26e05f18/parachains/runtimes/collectives/collectives-polkadot/src/ambassador/mod.rs#L52)): - Ambassadors (1-2 tiers) - Senior Ambassadors (3-4 tiers) - Head Ambassadors (5-7 tiers) - Master Ambassadors (8-9 tiers) Each rank has a corresponding `Origin` (e.g., `HeadAmbassadorsTier5` - [full list](https://github.com/paritytech/cumulus/blob/c238fb26b75569a11abb57437fd14acd26e05f18/parachains/runtimes/collectives/collectives-polkadot/src/ambassador/origins.rs#L35)), which represents the collective voice of members of that rank and above. ### Referendum The `AmbassadorReferenda` instance of [referenda pallet](https://docs.rs/pallet-referenda/latest/pallet_referenda/) consists of [nine tracks](https://github.com/paritytech/cumulus/blob/c238fb26b75569a11abb57437fd14acd26e05f18/parachains/runtimes/collectives/collectives-polkadot/src/ambassador/tracks.rs#L51), each corresponding to an `Origin`. A referendum taken on `senior ambassador tier 4` track invites all members from rank 4 or above to vote and commands `SeniorAmbassadors` `Origin`. Every member gets one vote plus an additional vote for every excess rank. The referendum proposal can be submitted by any member of a senior rank or above. ### Membership Management Initial members will be brought on chain via migration, with subsequent member management handled through the `AmbassadorCollective` instance of [ranked collective pallet](https://docs.rs/pallet-ranked-collective/latest/pallet_ranked_collective/). Both `Root` and `FellowshipAdmin` `Origins`, commanded via public Polkadot referendum, can promote or demote members to and from any rank. Members themselves also have the power to promote or demote via its referendum, with a senior member vote by the rank two above the new / current rank - [full configuration](https://github.com/paritytech/cumulus/blob/9ab6aa47063d7e8b67ddc10d9c136037f99c03a3/parachains/runtimes/collectives/collectives-polkadot/src/ambassador/mod.rs#L67). ### Content Management The program's on-chain content is managed via the collectives content pallet, allowing for setting its charter and making announcements. The voice of head ambassadors have the authority to set the charter, while announcements can be made by any senior rank member or through a referendum among all members. ### Additional Functionality The `AmbassadorCore` instance of [core fellowship pallet](https://docs.rs/pallet-core-fellowship/latest/pallet_core_fellowship/) decorates the ranked collectives pallet with features like salary determination, activity/passivity registration, and the handling of promotion and demotion periods. While the usage of this pallet is optional in the first version, future updates will make it the exclusive method for induction/promotion. Periodic salaries in USDt, payable on Asset Hub, are introduced through the [salary pallet](https://docs.rs/pallet-salary/latest/pallet_salary/ ). This requires induction into the ambassador core pallet. Please for more information on the pallets' functionality refer to their documentations. ### Next Steps: - Migrate to seed the program members - Mint ambassador NFT badges on Asset Hub when promoting - Treasury pallet instance for the Ambassador Program --------- Co-authored-by: Kian Paimani <[email protected]> Co-authored-by: joe petrowski <[email protected]>
-
- Sep 19, 2023
-
-
joe petrowski authored
Solution to establish HRMP channels between system parachains. --------- Co-authored-by: Muharem Ismailov <[email protected]>
-
- Sep 14, 2023
-
-
Muharem Ismailov authored
Enable `runtime-benchmarks` feature for `parachain-common` and `cumulus-primitives-utility` crates' dependencies. After adding `runtime-benchmarks = []` under `features` category in `Cargo.toml` files for the creates, I did run, > zepter lint propagate-feature --feature runtime-benchmarks --workspace --fix --feature-enables-dep="runtime-benchmarks:frame-benchmarking" This changes required for https://github.com/paritytech/polkadot-sdk/pull/1333
-
- Sep 11, 2023
-
-
Serban Iorga authored
* Move the bridges subtree under root * Squashed 'bridges/' changes from 277f0d5496..e50398d1c5 e50398d1c5 bridges subtree fixes (#2528) 99af07522d Markdown linter (#1309) (#2526) 733ff0fe7a `polkadot-staging` branch: Use polkadot-sdk dependencies (#2524) e8a59f141e Fix benchmark with new XCM::V3 `MAX_INSTRUCTIONS_TO_DECODE` (#2514) 62b185de15 Backport `polkadot-sdk` changes to `polkadot-staging` (#2518) d9658f4d5b Fix equivocation detection containers startup (#2516) (#2517) d65db28a8f Backport: building images from locally built binaries (#2513) 5fdbaf45f6 Start the equivocation detection loop from the complex relayer (#2507) (#2512) 7fbb67de46 Backport: Implement basic equivocations detection loop (#2375) cb7efe245c Manually update deps in polkadot staging (#2371) d17981fc33 #2351 to polkadot-staging (#2359) git-subtree-dir: bridges git-subtree-split: e50398d1c594e4e96df70b0bd376e565d17e8558 * Reapply diener workspacify * Fix Cargo.toml * Fix test * Adjustments
-
- Sep 05, 2023
-
-
joe petrowski authored
* add common libs * asset hubs * add westend * bridge hubs * collectives * contracts * emulated tests * parachain bin * delete collectives constants and update docs * integration tests should have apache license (some missing, some needed changing) * propagate features * fmt
-
- Sep 04, 2023
-
-
Ignacio Palacios authored
* bring back proper init * refactor block cycle * ".git/.scripts/commands/fmt/fmt.sh" * Update cumulus/xcm/xcm-emulator/src/lib.rs Co-authored-by: Squirrel <[email protected]> --------- Co-authored-by: command-bot <> Co-authored-by: Giles Cope <[email protected]>
-
Chevdor authored
* Add markdown linting - add linter default rules - adapt rules to current code - fix the code for linting to pass - add CI check fix #1243 * Fix markdown for Substrate * Fix tooling install * Fix workflow * Add documentation * Remove trailing spaces * Update .github/.markdownlint.yaml Co-authored-by: Oliver Tale-Yazdi <[email protected]> * Fix mangled markdown/lists * Fix captalization issues on known words
-
- Sep 01, 2023
-
-
Squirrel authored
* tests should not be run with runtime-benchmarks feature
-
Ignacio Palacios authored
* improve hygiene & clean up * improve hygiene & clean up - xcm-emulator * improve hygiene & clean up - common * improve hygiene & clean up - tests * improve hygiene & clean up - tests 2 * last hygiene bits * ".git/.scripts/commands/fmt/fmt.sh" --------- Co-authored-by: command-bot <>
-
- Aug 31, 2023
-
-
Bastian Köcher authored
* Rename `polkadot-parachain` to `polkadot-parachain-primitives` While doing this it also fixes some last `rustdoc` issues and fixes another Cargo warning related to `pallet-paged-list`. * Fix compilation * ".git/.scripts/commands/fmt/fmt.sh" * Fix XCM docs --------- Co-authored-by: command-bot <>
-
Alin Dima authored
* move min backing votes const to runtime also cache it per-session in the backing subsystem Signed-off-by: alindima <[email protected]> * add runtime migration * introduce api versioning for min_backing votes also enable it for rococo/versi for testing * also add min_backing_votes runtime calls to statement-distribution this dependency has been recently introduced by async backing * remove explicit version runtime API call this is not needed, as the RuntimeAPISubsystem already takes care of versioning and will return NotSupported if the version is not right. * address review comments - parametrise backing votes runtime API with session index - remove RuntimeInfo usage in backing subsystem, as runtime API caches the min backing votes by session index anyway. - move the logic for adjusting the configured needed backing votes with the size of the backing group to a primitives helper. - move the legacy min backing votes value to a primitives helper. - mark JoinMultiple error as fatal, since the Canceled (non-multiple) counterpart is also fatal. - make backing subsystem handle fatal errors for new leaves update. - add HostConfiguration consistency check for zeroed backing votes threshold - add cumulus accompanying change * fix cumulus test compilation * fix tests * more small fixes * fix merge * bump runtime api version for westend and rollback version for rococo --------- Signed-off-by: alindima <[email protected]> Co-authored-by: Javier Viola <[email protected]>
-
- Aug 30, 2023
-
-
Lulu authored
* Rename squatted crates This commit adds the staging- prefix to squatted crates so we can go forward and publish them to crates.io. Using the staging- prefix is a temp fix until we decide on replacement names. https://forum.parity.io/t/renaming-squated-crates-in-substrate-polkadot-cumulus/1964/6 * Fix test after crate renames * Update Lockfile
-
Przemek Rzad authored
* Add missing Cumulus licenses * Typo * Add missing Substrate licenses * Single job checking the sub-repos in steps * Remove dates * Remove dates * Add missing (C) * Update FRAME UI tests Signed-off-by: Oliver Tale-Yazdi <[email protected]> * Update more UI tests Signed-off-by: Oliver Tale-Yazdi <[email protected]> --------- Signed-off-by: Oliver Tale-Yazdi <[email protected]> Co-authored-by: Oliver Tale-Yazdi <[email protected]>
-
- Aug 29, 2023
-
-
Lulu authored
* Set test crates to nopublish * Don't publish more crates * Set even more crates to nopublish --------- Co-authored-by: Oliver Tale-Yazdi <[email protected]>
-
Oliver Tale-Yazdi authored
* Fix build profiles Closes https://github.com/paritytech/polkadot-sdk/issues/1155 Signed-off-by: Oliver Tale-Yazdi <[email protected]> * Manually set version to 1.0.0 Signed-off-by: Oliver Tale-Yazdi <[email protected]> * Use workspace repo Signed-off-by: Oliver Tale-Yazdi <[email protected]> * 'Authors and Edition from workspace Signed-off-by: Oliver Tale-Yazdi <[email protected]> --------- Signed-off-by: Oliver Tale-Yazdi <[email protected]>
-
- Aug 28, 2023
-
-
Oliver Tale-Yazdi authored
* Manually fix conflicting ? Signed-off-by: Oliver Tale-Yazdi <[email protected]> * Remove duplicates Signed-off-by: Oliver Tale-Yazdi <[email protected]> * Autofix feature propagation zepter lint propagate-feature --feature try-runtime --left-side-feature-missing=ignore --workspace --fix --feature-enables-dep="try-runtime:frame-try-runtime" zepter lint propagate-feature --feature runtime-benchmarks --left-side-feature-missing=ignore --workspace --fix --feature-enables-dep="runtime-benchmarks:frame-benchmarking" zepter lint propagate-feature --feature std --left-side-feature-missing=ignore --workspace --fix zepter f f Signed-off-by: Oliver Tale-Yazdi <[email protected]> * Bump zepter Signed-off-by: Oliver Tale-Yazdi <[email protected]> * Add some duplicates Signed-off-by: Oliver Tale-Yazdi <[email protected]> * Revert "Add some duplicates" This reverts commit c6ce6272 . * Remove default enabled features Signed-off-by: Oliver Tale-Yazdi <[email protected]> * Bump Zepter Signed-off-by: Oliver Tale-Yazdi <[email protected]> * Bump in correct location
🤦 Signed-off-by: Oliver Tale-Yazdi <[email protected]> * DNM: Add some mistakes Signed-off-by: Oliver Tale-Yazdi <[email protected]> * DNM: Add some mistakes Signed-off-by: Oliver Tale-Yazdi <[email protected]> * Revert "DNM: Add some mistakes" This reverts commit d469b3f0. * Revert "DNM: Add some mistakes" This reverts commit d892a73a . --------- Signed-off-by: Oliver Tale-Yazdi <[email protected]>
-
- Aug 25, 2023
-
-
Alexander authored
Signed-off-by: alvicsam <[email protected]>
-
- Aug 24, 2023
-
-
Oliver Tale-Yazdi authored
* Fix aura config Signed-off-by: Oliver Tale-Yazdi <[email protected]> * Fix Cargo.toml files Signed-off-by: Oliver Tale-Yazdi <[email protected]> * Ignore feature-dependant tests Signed-off-by: Oliver Tale-Yazdi <[email protected]> * Allow dead code Signed-off-by: Oliver Tale-Yazdi <[email protected]> --------- Signed-off-by: Oliver Tale-Yazdi <[email protected]>
-