## Motivation

`pallet-xcm` is the main user-facing interface for XCM functionality,
including assets manipulation functions like `teleportAssets()` and
`reserve_transfer_assets()` calls.

While `teleportAsset()` works both ways, `reserve_transfer_assets()`
works only for sending reserve-based assets to a remote destination and
beneficiary when the reserve is the _local chain_.

## Solution

This PR enhances `pallet_xcm::(limited_)reserve_withdraw_assets` to
support transfers when reserves are other chains.
This will allow complete, **bi-directional** reserve-based asset
transfers user stories using `pallet-xcm`.

Enables following scenarios:
- transferring assets with local reserve (was previously supported iff
asset used as fee also had local reserve - now it works in all cases),
- transferring assets with reserve on destination,
- transferring assets with reserve on remote/third-party chain (iff
assets and fees have same remote reserve),
- transferring assets with reserve different than the reserve of the
asset to be used as fees - meaning can be used to transfer random asset
with local/dest reserve while using DOT for fees on all involved chains,
even if DOT local/dest reserve doesn't match asset reserve,
- transferring assets with any type of local/dest reserve while using
fees which can be teleported between involved chains.

All of the above is done by pallet inner logic without the user having
to specify which scenario/reserves/teleports/etc. The correct scenario
and corresponding XCM programs are identified, and respectively, built
automatically based on runtime configuration of trusted teleporters and
trusted reserves.

#### Current limitations:
- while `fees` and "non-fee" `assets` CAN have different reserves (or
fees CAN be teleported), the remaining "non-fee" `assets` CANNOT, among
themselves, have different reserve locations (this is also implicitly
enforced by `MAX_ASSETS_FOR_TRANSFER=2`, but this can be safely
increased in the future).
- `fees` and "non-fee" `assets` CANNOT have **different remote**
reserves (this could also be supported in the future, but adds even more
complexity while possibly not being worth it - we'll see what the future
holds).

Fixes https://github.com/paritytech/polkadot-sdk/issues/1584
Fixes https://github.com/paritytech/polkadot-sdk/issues/2055

---------

Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Branislav Kontur <[email protected]>

We are introducing a new set of `XcmController` traits (final name yet
to be determined).
These traits are implemented by `pallet-xcm` and allows other pallets,
such as `pallet_contracts`, to rely on these traits instead of tight
coupling them to `pallet-xcm`.

Using only the existing Xcm traits would mean duplicating the logic from
`pallet-xcm` in these other pallets, which we aim to avoid. Our
objective is to ensure that when these APIs are called from
`pallet-contracts`, they produce the exact same outcomes as if called
directly from `pallet-xcm`.

The other benefits is that we can also expose return values to
`pallet-contracts` instead of just calling `pallet-xcm` dispatchable and
getting a `DispatchResult` back.

See traits integration in this PR
https://github.com/paritytech/polkadot-sdk/pull/1248, where the traits
are used as follow to define and implement `pallet-contracts` Config.
```rs
// Contracts config:
pub trait Config: frame_system::Config {
  // ...

  /// A type that exposes XCM APIs, allowing contracts to interact with other parachains, and
  /// execute XCM programs.
  type Xcm: xcm_executor::traits::Controller<
	  OriginFor<Self>,
	  <Self as frame_system::Config>::RuntimeCall,
	  BlockNumberFor<Self>,
  >;
}

// implementation
impl pallet_contracts::Config for Runtime {
        // ...

	type Xcm = pallet_xcm::Pallet<Self>;
}
```

---------

Co-authored-by: Alexander Theißen <[email protected]>
Co-authored-by: command-bot <>

Missing descriptions (47):  

- [x] `cumulus/client/collator/Cargo.toml`
- [x] `cumulus/client/relay-chain-inprocess-interface/Cargo.toml`
- [x] `cumulus/client/cli/Cargo.toml`
- [x] `cumulus/client/service/Cargo.toml`
- [x] `cumulus/client/relay-chain-rpc-interface/Cargo.toml`
- [x] `cumulus/client/relay-chain-interface/Cargo.toml`
- [x] `cumulus/client/relay-chain-minimal-node/Cargo.toml`
- [x] `cumulus/parachains/pallets/parachain-info/Cargo.toml`
- [x] `cumulus/parachains/pallets/ping/Cargo.toml`
- [x] `cumulus/primitives/utility/Cargo.toml`
- [x] `cumulus/primitives/aura/Cargo.toml`
- [x] `cumulus/primitives/core/Cargo.toml`
- [x] `cumulus/primitives/parachain-inherent/Cargo.toml`
- [x] `cumulus/test/relay-sproof-builder/Cargo.toml`
- [x] `cumulus/pallets/xcmp-queue/Cargo.toml`
- [x] `cumulus/pallets/dmp-queue/Cargo.toml`
- [x] `cumulus/pallets/xcm/Cargo.toml`
- [x] `polkadot/erasure-coding/Cargo.toml`
- [x] `polkadot/statement-table/Cargo.toml`
- [x] `polkadot/primitives/Cargo.toml`
- [x] `polkadot/rpc/Cargo.toml`
- [x] `polkadot/node/service/Cargo.toml`
- [x] `polkadot/node/core/parachains-inherent/Cargo.toml`
- [x] `polkadot/node/core/approval-voting/Cargo.toml`
- [x] `polkadot/node/core/dispute-coordinator/Cargo.toml`
- [x] `polkadot/node/core/av-store/Cargo.toml`
- [x] `polkadot/node/core/chain-api/Cargo.toml`
- [x] `polkadot/node/core/prospective-parachains/Cargo.toml`
- [x] `polkadot/node/core/backing/Cargo.toml`
- [x] `polkadot/node/core/provisioner/Cargo.toml`
- [x] `polkadot/node/core/runtime-api/Cargo.toml`
- [x] `polkadot/node/core/bitfield-signing/Cargo.toml`
- [x] `polkadot/node/network/dispute-distribution/Cargo.toml`
- [x] `polkadot/node/network/bridge/Cargo.toml`
- [x] `polkadot/node/network/collator-protocol/Cargo.toml`
- [x] `polkadot/node/network/approval-distribution/Cargo.toml`
- [x] `polkadot/node/network/availability-distribution/Cargo.toml`
- [x] `polkadot/node/network/bitfield-distribution/Cargo.toml`
- [x] `polkadot/node/network/gossip-support/Cargo.toml`
- [x] `polkadot/node/network/availability-recovery/Cargo.toml`
- [x] `polkadot/node/collation-generation/Cargo.toml`
- [x] `polkadot/node/overseer/Cargo.toml`
- [x] `polkadot/runtime/parachains/Cargo.toml`
- [x] `polkadot/runtime/common/slot_range_helper/Cargo.toml`
- [x] `polkadot/runtime/metrics/Cargo.toml`
- [x] `polkadot/xcm/pallet-xcm-benchmarks/Cargo.toml`
- [x] `polkadot/utils/generate-bags/Cargo.toml`
- [x]  `substrate/bin/minimal/runtime/Cargo.toml`

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Signed-off-by: alindima <[email protected]>
Co-authored-by: ordian <[email protected]>
Co-authored-by: Tsvetomir Dimitrov <[email protected]>
Co-authored-by: Marcin S <[email protected]>
Co-authored-by: alindima <[email protected]>
Co-authored-by: Sebastian Kunert <[email protected]>
Co-authored-by: Dmitry Markin <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>

# Description

We would like to add our bootnodes to the following parachains:

Westend: Westmint, Bridgehub

Kusama: Statemine, Bridgehub

Polkadot: Statemint, Bridgehub, Collectives

Thank you.

---------

Co-authored-by: Oliver Tale-Yazdi <[email protected]>

This PR changes the registration order of the `MessageQueue` pallet so
that it is registered last.

This is necessary so that the
[on_initialize](https://github.com/Snowfork/snowbridge/blob/df8d5da8/parachain/pallets/outbound-queue/src/lib.rs#L267)
hooks for Snowbridge can run before `MessageQueue` delivers messages
using its own `on_initialize`.

Generally, I think this is preferable regardless of Snowbridge's
particular requirements. Other pallets may want to do housekeeping
before MessageQueue starts delivering messages.

I'm hoping this PR, if accepted, can be included in the same release as
https://github.com/paritytech/polkadot-sdk/pull/1246. As otherwise,
changing the order of pallet registration is an ABI-breaking change.

This PR contains some fixes and cleanups for parachain nodes:

1. When using async backing, node no longer complains about being unable
to reach the prospective-parachain subsystem.
2. Parachain warp sync now informs users that the finalized para block
has been retrieved.
```
2023-11-08 13:24:42 [Parachain] 🎉 Received finalized parachain header #5747719 (0xa0aa…674b) from the relay chain.
```
3. When a user supplied an invalid `--relay-chain-rpc-url`, we were
crashing with a very verbose message. Removed the `expect` and improved
the error message.
```
2023-11-08 13:57:56 [Parachain] No valid RPC url found. Stopping RPC worker.
2023-11-08 13:57:56 [Parachain] Essential task `relay-chain-rpc-worker` failed. Shutting down service.
Error: Service(Application(WorkerCommunicationError("RPC worker channel closed. This can hint and connectivity issues with the supplied RPC endpoints. Message: oneshot canceled")))
```

Some legacy tests were mistakenly merged in #1256 for `emulated-integration-tests-common` crate.
This PR fixes the function name `build_genesis_storage` (no need to use `legacy` suffix, even though the genesis is built from `RuntimeGenesisConfig`).

Closes:
- #1383 
- Declared chains can be now be imported and reused in a different
crate.
- Chain declaration are now generic over a generic type `N` (the
Network)
- #1389
- Solved #1383, chains and networks declarations can be restructure to
avoid having to compile all chains when running integrations tests where
are not needed.
- Chains are now declared on its own crate (removed from
`integration-tests-common`)
- Networks are now declared on its own crate (removed from
`integration-tests-common`)
    - Integration tests will import only the relevant Network crate
- `integration-tests-common` is renamed to
`emulated-integration-tests-common`

All this is necessary to be able to implement what is described here:
https://github.com/paritytech/roadmap/issues/56#issuecomment-1777010553

---------

Co-authored-by: command-bot <>

The trie cache implementation was ignoring the `storage_root` when
setting up the value cache. The problem with this is that the value
cache works using `storage_keys` and these keys are not unique across
different tries. A block can actually have different tries (main trie
and multiple child tries). This pull request fixes the issue by not
ignoring the `storage_root` and returning an unique `value_cache` per
`storage_root`. It also adds a test for the seen bug and improves
documentation that this doesn't happen again.

`bridge-hub-westend-runtime` was added to cumulus/parachains, but wasn't
hooked up to xcm-emulator to run tests against it.

This commit addresses that ^.

Signed-off-by: Adrian Catangiu <[email protected]>

When running with `--relay-chain-rpc-url` we received multiple reports
of high traffic that disappears when `--in-peers-light 0` is set. Indeed
it does not make much sense for light clients to connect to the minimal
node since it is not running the block announce protocol and the
request/response protocol for light clients.

This is intended to alleviate the traffic issues for now.

closes #1896
probably related https://github.com/paritytech/cumulus/issues/2563

This PR updates the version of `serde_json` to `1.0.108` throughout the
codebase.

Otherwise the return code is not correctly propagated (ref
https://github.com/ggwpez/zepter/pull/48).

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

This PR prepares chains specs for _native-runtime-free_  world.

This PR has following changes:
- `substrate`:
  - adds support for:
- JSON based `GenesisConfig` to `ChainSpec` allowing interaction with
runtime `GenesisBuilder` API.
- interacting with arbitrary runtime wasm blob to[
`chain-spec-builder`](https://github.com/paritytech/substrate/blob/3ef576eaeb3f42610e85daecc464961cf1295570/bin/utils/chain-spec-builder/src/lib.rs#L46)
command line util,
- removes
[`code`](https://github.com/paritytech/substrate/blob/3ef576eaeb3f42610e85daecc464961cf1295570/frame/system/src/lib.rs#L660)
from `system_pallet`
  - adds `code` to the `ChainSpec`
- deprecates
[`ChainSpec::from_genesis`](https://github.com/paritytech/substrate/blob/3ef576eaeb3f42610e85daecc464961cf1295570/client/chain-spec/src/chain_spec.rs#L263),
but also changes the signature of this method extending it with `code`
argument.
[`ChainSpec::builder()`](https://github.com/paritytech/substrate/blob/20bee680ed098be7239cf7a6b804cd4de267983e/client/chain-spec/src/chain_spec.rs#L507)
should be used instead.
- `polkadot`:
- all references to `RuntimeGenesisConfig` in `node/service` are
removed,
- all
`(kusama|polkadot|versi|rococo|wococo)_(staging|dev)_genesis_config`
functions now return the JSON patch for default runtime `GenesisConfig`,
  - `ChainSpecBuilder` is used, `ChainSpec::from_genesis` is removed,

- `cumulus`:
  - `ChainSpecBuilder` is used, `ChainSpec::from_genesis` is removed,
- _JSON_ patch configuration used instead of `RuntimeGenesisConfig
struct` in all chain specs.
  
---------

Co-authored-by: command-bot <>
Co-authored-by: Javier Viola <[email protected]>
Co-authored-by: Davide Galassi <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Kevin Krone <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

# Description

Update the bootnode of kusama parachains before decommissioning the
nodes. This will avoid connecting to non-existing bootnodes.

This PR removes the `GenesisExt` wrapper over the `GenesisRuntimeConfig`
in `cumulus-test-service`. Initialization of values that were performed
by `GenesisExt::BuildStorage` was moved into `test_pallet` genesis.

---------

Co-authored-by: command-bot <>
Co-authored-by: Bastian Köcher <[email protected]>

The `BlockBuilderProvider` was a trait that was defined in
`sc-block-builder`. The trait was implemented for `Client`. This
basically meant that you needed to import `sc-block-builder` any way to
have access to the block builder. So, this trait was not providing any
real value. This pull request is removing the said trait. Instead of the
trait it introduces a builder for creating a `BlockBuilder`. The builder
currently has the quite fabulous name `BlockBuilderBuilder` (I'm open to
any better name 😅

). The rest of the pull request is about
replacing the old trait with the new builder.

# Downstream code changes

If you used `new_block` or `new_block_at` before you now need to switch
it over to the new `BlockBuilderBuilder` pattern:

```rust
// `new` requires a type that implements `CallApiAt`. 
let mut block_builder = BlockBuilderBuilder::new(client)
                // Then you need to specify the hash of the parent block the block will be build on top of
		.on_parent_block(at)
                // The block builder also needs the block number of the parent block. 
                // Here it is fetched from the given `client` using the `HeaderBackend`
                // However, there also exists `with_parent_block_number` for directly passing the number
		.fetch_parent_block_number(client)
		.unwrap()
                // Enable proof recording if required. This call is optional.
		.enable_proof_recording()
                // Pass the digests. This call is optional.
                .with_inherent_digests(digests)
		.build()
		.expect("Creates new block builder");
```

---------

Co-authored-by: Sebastian Kunert <[email protected]>
Co-authored-by: command-bot <>

# Description

Update the bootnode of kusama parachains before decommissioning the
nodes. This will avoid connecting to non-existing bootnodes.

The check_hardware functions does not give us too much information as to
what is failing, so let's return the list of failed metrics, so that callers can print 
it.

This would make debugging easier, rather than try to guess which
dimension is actually failing.

Signed-off-by: Alexandru Gheorghe <[email protected]>

Right now governance could only control byte-fee component of Rococo <>
Westend message fees (paid at Asset Hubs). This PR changes it a bit:
1) governance now allowed to control both fee components - byte fee and
base fee;
2) base fee now includes cost of "default" delivery and confirmation
transactions, in addition to `ExportMessage` instruction cost.

(imported from https://github.com/paritytech/cumulus/pull/2157)

## Changes

This MR refactores the XCMP, Parachains System and DMP pallets to use
the [MessageQueue](https://github.com/paritytech/substrate/pull/12485)
for delayed execution of incoming messages. The DMP pallet is entirely
replaced by the MQ and thereby removed. This allows for PoV-bounded
execution and resolves a number of issues that stem from the current
work-around.

All System Parachains adopt this change.  
The most important changes are in `primitives/core/src/lib.rs`,
`parachains/common/src/process_xcm_message.rs`,
`pallets/parachain-system/src/lib.rs`, `pallets/xcmp-queue/src/lib.rs`
and the runtime configs.

### DMP Queue Pallet

The pallet got removed and its logic refactored into parachain-system.
Overweight message management can be done directly through the MQ
pallet.

Final undeployment migrations are provided by
`cumulus_pallet_dmp_queue::UndeployDmpQueue` and `DeleteDmpQueue` that
can be configured with an aux config trait like:

```rust
parameter_types! {
	pub const DmpQueuePalletName: &'static str = \"DmpQueue\" < CHANGE ME;
	pub const RelayOrigin: AggregateMessageOrigin = AggregateMessageOrigin::Parent;
}

impl cumulus_pallet_dmp_queue::MigrationConfig for Runtime {
	type PalletName = DmpQueuePalletName;
	type DmpHandler = frame_support::traits::EnqueueWithOrigin<MessageQueue, RelayOrigin>;
	type DbWeight = <Runtime as frame_system::Config>::DbWeight;
}

// And adding them to your Migrations tuple:
pub type Migrations = (
	...
	cumulus_pallet_dmp_queue::UndeployDmpQueue<Runtime>,
	cumulus_pallet_dmp_queue::DeleteDmpQueue<Runtime>,
);
```

### XCMP Queue pallet

Removed all dispatch queue functionality. Incoming XCMP messages are now
either: Immediately handled if they are Signals, enqueued into the MQ
pallet otherwise.

New config items for the XCMP queue pallet:
```rust
/// The actual queue implementation that retains the messages for later processing.
type XcmpQueue: EnqueueMessage<ParaId>;

/// How a XCM over HRMP from a sibling parachain should be processed.
type XcmpProcessor: ProcessMessage<Origin = ParaId>;

/// The maximal number of suspended XCMP channels at the same time.
#[pallet::constant]
type MaxInboundSuspended: Get<u32>;
```

How to configure those:

```rust
// Use the MessageQueue pallet to store messages for later processing. The `TransformOrigin` is needed since
// the MQ pallet itself operators on `AggregateMessageOrigin` but we want to enqueue `ParaId`s.
type XcmpQueue = TransformOrigin<MessageQueue, AggregateMessageOrigin, ParaId, ParaIdToSibling>;

// Process XCMP messages from siblings. This is type-safe to only accept `ParaId`s. They will be dispatched
// with origin `Junction::Sibling(…)`.
type XcmpProcessor = ProcessFromSibling<
	ProcessXcmMessage<
		AggregateMessageOrigin,
		xcm_executor::XcmExecutor<xcm_config::XcmConfig>,
		RuntimeCall,
	>,
>;

// Not really important what to choose here. Just something larger than the maximal number of channels.
type MaxInboundSuspended = sp_core::ConstU32<1_000>;
```

The `InboundXcmpStatus` storage item was replaced by
`InboundXcmpSuspended` since it now only tracks inbound queue suspension
and no message indices anymore.

Now only sends the most recent channel `Signals`, as all prio ones are
out-dated anyway.

### Parachain System pallet

For `DMP` messages instead of forwarding them to the `DMP` pallet, it
now pushes them to the configured `DmpQueue`. The message processing
which was triggered in `set_validation_data` is now being done by the MQ
pallet `on_initialize`.

XCMP messages are still handed off to the `XcmpMessageHandler`
(XCMP-Queue pallet) - no change here.

New config items for the parachain system pallet:
```rust
/// Queues inbound downward messages for delayed processing. 
///
/// Analogous to the `XcmpQueue` of the XCMP queue pallet.
type DmpQueue: EnqueueMessage<AggregateMessageOrigin>;
``` 

How to configure:
```rust
/// Use the MQ pallet to store DMP messages for delayed processing.
type DmpQueue = MessageQueue;
``` 

## Message Flow

The flow of messages on the parachain side. Messages come in from the
left via the `Validation Data` and finally end up at the `Xcm Executor`
on the right.

![Untitled
(1)](https://github.com/paritytech/cumulus/assets/10380170/6cf8b377-88c9-4aed-96df-baace266e04d)

## Further changes

- Bumped the default suspension, drop and resume thresholds in
`QueueConfigData::default()`.
- `XcmpQueue::{suspend_xcm_execution, resume_xcm_execution}` errors when
they would be a noop.
- Properly validate the `QueueConfigData` before setting it.
- Marked weight files as auto-generated so they wont auto-expand in the
MR files view.
- Move the `hypothetical` asserts to `frame_support` under the name
`experimental_hypothetically`

Questions:
- [ ] What about the ugly `#[cfg(feature = \"runtime-benchmarks\")]` in
the runtimes? Not sure how to best fix. Just having them like this makes
tests fail that rely on the real message processor when the feature is
enabled.
- [ ] Need a good weight for `MessageQueueServiceWeight`. The scheduler
already takes 80% so I put it to 10% but that is quite low.

TODO:
- [x] Remove c&p code after
https://github.com/paritytech/polkadot/pull/6271
- [x] Use `HandleMessage` once it is public in Substrate
- [x] fix `runtime-benchmarks` feature
https://github.com/paritytech/polkadot/pull/6966
- [x] Benchmarks
- [x] Tests
- [ ] Migrate `InboundXcmpStatus` to `InboundXcmpSuspended`
- [x] Possibly cleanup Migrations (DMP+XCMP)
- [x] optional: create `TransformProcessMessageOrigin` in Substrate and
replace `ProcessFromSibling`
- [ ] Rerun weights on ref HW

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: command-bot <>

## Summary

Asset bridging support for AssetHub**Rococo** <-> AssetHub**Wococo** was
added [here](https://github.com/paritytech/polkadot-sdk/pull/1215), so
now we aim to bridge AssetHub**Rococo** and AssetHub**Westend**. (And
perhaps retire AssetHubWococo and the Wococo chains).

## Solution

**bridge-hub-westend-runtime**
- added new runtime as a copy of `bridge-hub-rococo-runtime`
- added support for bridging to `BridgeHubRococo`
- added tests and benchmarks

**bridge-hub-rococo-runtime**
- added support for bridging to `BridgeHubWestend`
- added tests and benchmarks
- internal refactoring by splitting bridge configuration per network,
e.g., `bridge_to_whatevernetwork_config.rs`.

**asset-hub-rococo-runtime**
- added support for asset bridging to `AssetHubWestend` (allows to
receive only WNDs)
- added new xcm router for `Westend`
- added tests and benchmarks

**asset-hub-westend-runtime**
- added support for asset bridging to `AssetHubRococo` (allows to
receive only ROCs)
- added new xcm router for `Rococo`
- added tests and benchmarks

## Deployment

All changes will be deployed as a part of
https://github.com/paritytech/polkadot-sdk/issues/1988.

## TODO

- [x] benchmarks for all pallet instances
- [x] integration tests
- [x] local run scripts


Relates to:
https://github.com/paritytech/parity-bridges-common/issues/2602
Relates to: https://github.com/paritytech/polkadot-sdk/issues/1988

---------

Co-authored-by: command-bot <>
Co-authored-by: Adrian Catangiu <[email protected]>
Co-authored-by: joe petrowski <[email protected]>

Changes:
- Change the fungible(s) logic to treat a self-transfer as No-OP (as
long as all pre-checks pass).

Note that the self-transfer case will not emit an event since no state
was changed.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

Co-authored-by: Sergejs Kostjucenko <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

Removed confusing and outdated `TODO`.

This ensures that upgrading a parachain code sends the same event &
digest as when using `set_code` on a standalone chain.

Close: https://github.com/paritytech/polkadot-sdk/issues/2049

Closes https://github.com/paritytech/release-engineering/issues/6

Adds a new Github Workflow which on a new release being created, builds
and attaches all runtimes managed in this repository in two flavours:
- `dev-debug-build`: Built with the `try-runtime` feature and has
logging enabled
- `on-chain-release`: Built with the regular old `on-chain-release`
feature

The new Github Workflow could be extended in the future by the
@paritytech/release-engineering team to fully automate the release
process if they choose to, similar to how it is fully automated in the
Fellowship repo
(https://github.com/polkadot-fellows/runtimes/blob/main/.github/workflows/release.yml).

The `on-chain-release` did not exist for parachains, so I added it. 

---

Tested on my fork: 
- https://github.com/liamaharon/polkadot-sdk/actions/runs/6663773523
- https://github.com/liamaharon/polkadot-sdk/releases/tag/test-6

---------

Co-authored-by: Chevdor <[email protected]>
Co-authored-by: Dónal Murray <[email protected]>

When warp syncing a node we import a header of the parachain around the
tip of the chain. This header is currently not imported as finalized
block (should be fixed at some point as well), the parent headers are
not yet present (still being synced) and thus, we run into a panic. Even
if there is a case where a leaf could not be found in the database, this
probably means that the db is broken and it will fail somewhere elese.

the min slot duration should be 0 only if the `experimental` feature is
enabled. otherwise, the runtime will panic on a division by 0.

Co-authored-by: Adrian Catangiu <[email protected]>

# Description

- What does this PR do?

While working with `pallet_nfts` through `nonfungibles_v2` traits
`Inspect, Mutate`, I found out that once you have set the collection
attribute with `<Nfts as Mutate>::set_collection_attribute()`, it's not
possible to read it with `<Nfts as Inspect>::collection_attribute()`
since they use different `namespace` values. When setting the attribute,
`AttributeNamespace::Pallet` is used, while
`AttributeNamespace::CollectionOwner` is used when reading.

more context:
https://github.com/freeverseio/laos/issues/7#issuecomment-1766137370

This PR makes `item` an optional parameter in
`Inspect::system_attribute()`, to be able to read collection attributes.

- Why are these changes needed?

To be able to read collection level attributes when reading attributes
of the collection. It will be possible to read collection attributes by
passing `None` for `item`

- How were these changes implemented and what do they affect?

`NftsApi` is also affected and `NftsApi::system_attribute()` now accepts
optional `item` parameter.

## Breaking change

Because of the change in the `NftsApi::system_attribute()` method's
`item` param, parachains who integrated the `NftsApi` need to update
their API code and frontend integrations accordingly. AssetHubs are
unaffected since the NftsApi wasn't released on those parachains yet.

[testnet] Align testnet system parachain runtimes using `RelayTreasuryLocation` and `SystemParachains` in the same way (#2023)

This PR addresses several issues:
- simplify referencing `RelayTreasuryLocation` without needing
additional `RelayTreasury` struct
- fix for referencing `SystemParachains` from parachain with `parents:
1` instead of `parents: 0`
- removed hard-coded constants and fix tests for `asset-hub-rococo`
which was merged to master after
https://github.com/paritytech/polkadot-sdk/pull/1726

---------

Co-authored-by: command-bot <>

Adds a config file that allows to run `zepter` without any arguments in
the workspace to address all issues.
A secondary workflow for the CI is provided as `zepter run check`. Both
the formatting and linting are now in one check for efficiancy.

The latest version also detects some more things that `featalign` was
already showing.

Error message [in the
CI](https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/3916205)
now looks like this:
```pre
...
crate 'test-parachains' (/Users/vados/Documents/work/polkadot-sdk/polkadot/parachain/test-parachains/Cargo.toml)
  feature 'std'
    must propagate to:
      parity-scale-codec
Found 55 issues (run with --fix to fix).
Error: Command 'lint propagate-feature' failed with exit code 1

Polkadot-SDK uses the Zepter CLI to detect abnormalities in the feature configuration.
It looks like one more more checks failed; please check the console output. You can try to automatically address them by running `zepter`.
Otherwise please ask directly in the Merge Request, GitHub Discussions or on Matrix Chat, thank you.

For more information, see:
  - https://github.com/paritytech/polkadot-sdk/issues/1831
  - https://github.com/ggwpez/zepter
```

TODO:
- [x] Check that CI fails correctly

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

closes https://github.com/paritytech/polkadot-sdk/issues/1882

## Breaking Changes

This PR introduces a new item to `pallet_balances::Config`:

```diff
trait Config {
++    type RuntimeFreezeReasons;
}
```

This value is only used to check it against `type MaxFreeze`. A similar
check has been added for `MaxHolds` against `RuntimeHoldReasons`, which
is already given to `pallet_balances`.

In all contexts, you should pass the real `RuntimeFreezeReasons`
generated by `construct_runtime` to `type RuntimeFreezeReasons`. Passing
`()` would also work, but it would imply that the runtime uses no
freezes at all.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

Fixes #768.

This PR does not introduce any functional changes to the existing code,
it merely addresses several minor refactors:
- Moving bridging pallets to separate files.
- Improving the readability and naming of weight files for bridging
pallets and bridging pallet instances.

The reason for this refactor is to facilitate easier plugin integration
for the upcoming bridge between Rococo and Westend.

---------

Co-authored-by: command-bot <>

## Problem

This PR addresses the issue with testnet AssetHub builds, which was
discovered during the execution of `bot bench`.

https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4038738
```
     Compiling asset-hub-rococo-runtime-wasm v1.0.0 (/builds/parity/mirrors/polkadot-sdk/target/production/wbuild/asset-hub-rococo-runtime)
  warning: Linking globals named 'Core_version': symbol multiply defined!
  error: failed to load bitcode of module "rococo_runtime-8799ee884447805a.rococo_runtime.0bc572b8-cgu.0.rcgu.o": 
  warning: `asset-hub-rococo-runtime-wasm` (lib) generated 1 warning
  error: could not compile `asset-hub-rococo-runtime-wasm` (lib) due to previous error; 1 warning emitted
```

https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4038739
```
Compiling asset-hub-westend-runtime-wasm v1.0.0 (/builds/parity/mirrors/polkadot-sdk/target/production/wbuild/asset-hub-westend-runtime)
  warning: Linking globals named 'Core_version': symbol multiply defined!
  error: failed to load bitcode of module "westend_runtime-86d7844430f97d5c.westend_runtime.b7678d03-cgu.0.rcgu.o": 
  warning: `asset-hub-westend-runtime-wasm` (lib) generated 1 warning
  error: could not compile `asset-hub-westend-runtime-wasm` (lib) due to previous error; 1 warning emitted
```

## Solution

- Removed dependencies on `rococo-runtime` and `westend-runtime`
introduced by [this
PR](https://github.com/paritytech/polkadot-sdk/pull/1234/files#diff-a86375df98e04ca3cce1ea35c40257a222e2d5087f5f528ff33307678b78dc2dR534-R550).
- Replaced `<rococo_runtime::Treasury as PalletInfoAccess>::index()`
with `rococo_runtime_constants::TREASURY_PALLET_ID`.
- Added `check_treasury_pallet_id` to the relay runtimes to ensure that
the constant is aligned with the pallet id.
- Added "Rococo Treasury" to the waived locations (that will not be
charged fees in the executor) for `BridgeHubRococo` (to be aligned with
AssetHubs).

## References

[Full element discussion
here](https://matrix.to/#/!JUeaZUiYbdrvzvtwSL:parity.io/$2PnjYMsWRjR7M3oOfGuRI0XkjdoqJLtRcAPVcDLuLVg?via=parity.io&via=web3.foundation).

---------

Co-authored-by: command-bot <>

This PR addresses several minor issues:
- Fixes the symlink for `asset-hub-rococo.json` chainspec.
- Corrects the `asset-hub-rococo-genesis` invulnerables setup.
- Relocates common bash functions for bridge testing to a separate file
`bridges_common.sh`.