This MR is the merge of
https://github.com/paritytech/substrate/pull/14414 and
https://github.com/paritytech/substrate/pull/14275. It implements
[RFC#13](https://github.com/polkadot-fellows/RFCs/pull/13), closes
https://github.com/paritytech/polkadot-sdk/issues/198.

----- 

This Merge request introduces three major topicals:

1. Multi-Block-Migrations
1. New pallet `poll` hook for periodic service work
1. Replacement hooks for `on_initialize` and `on_finalize` in cases
where `poll` cannot be used

and some more general changes to FRAME.  
The changes for each topical span over multiple crates. They are listed
in topical order below.

# 1.) Multi-Block-Migrations

Multi-Block-Migrations are facilitated by creating `pallet_migrations`
and configuring `System::Config::MultiBlockMigrator` to point to it.
Executive picks this up and triggers one step of the migrations pallet
per block.
The chain is in lockdown mode for as long as an MBM is ongoing.
Executive does this by polling `MultiBlockMigrator::ongoing` and not
allowing any transaction in a block, if true.

A MBM is defined through trait `SteppedMigration`. A condensed version
looks like this:
```rust
/// A migration that can proceed in multiple steps.
pub trait SteppedMigration {
	type Cursor: FullCodec + MaxEncodedLen;
	type Identifier: FullCodec + MaxEncodedLen;

	fn id() -> Self::Identifier;

	fn max_steps() -> Option<u32>;

	fn step(
		cursor: Option<Self::Cursor>,
		meter: &mut WeightMeter,
	) -> Result<Option<Self::Cursor>, SteppedMigrationError>;
}
```

`pallet_migrations` can be configured with an aggregated tuple of these
migrations. It then starts to migrate them one-by-one on the next
runtime upgrade.
Two things are important here:
- 1. Doing another runtime upgrade while MBMs are ongoing is not a good
idea and can lead to messed up state.
- 2. **Pallet Migrations MUST BE CONFIGURED IN `System::Config`,
otherwise it is not used.**

The pallet supports an `UpgradeStatusHandler` that can be used to notify
external logic of upgrade start/finish (for example to pause XCM
dispatch).

Error recovery is very limited in the case that a migration errors or
times out (exceeds its `max_steps`). Currently the runtime dev can
decide in `FailedMigrationHandler::failed` how to handle this. One
follow-up would be to pair this with the `SafeMode` pallet and enact
safe mode when an upgrade fails, to allow governance to rescue the
chain. This is currently not possible, since governance is not
`Mandatory`.

## Runtime API

- `Core`: `initialize_block` now returns `ExtrinsicInclusionMode` to
inform the Block Author whether they can push transactions.

### Integration

Add it to your runtime implementation of `Core` and `BlockBuilder`:
```patch
diff --git a/runtime/src/lib.rs b/runtime/src/lib.rs
@@ impl_runtime_apis! {
	impl sp_block_builder::Core<Block> for Runtime {
-		fn initialize_block(header: &<Block as BlockT>::Header) {
+		fn initialize_block(header: &<Block as BlockT>::Header) -> RuntimeExecutiveMode {
			Executive::initialize_block(header)
		}

		...
	}
```

# 2.) `poll` hook

A new pallet hook is introduced: `poll`. `Poll` is intended to replace
mostly all usage of `on_initialize`.
The reason for this is that any code that can be called from
`on_initialize` cannot be migrated through an MBM. Currently there is no
way to statically check this; the implication is to use `on_initialize`
as rarely as possible.
Failing to do so can result in broken storage invariants.

The implementation of the poll hook depends on the `Runtime API` changes
that are explained above.

# 3.) Hard-Deadline callbacks

Three new callbacks are introduced and configured on `System::Config`:
`PreInherents`, `PostInherents` and `PostTransactions`.
These hooks are meant as replacement for `on_initialize` and
`on_finalize` in cases where the code that runs cannot be moved to
`poll`.
The reason for this is to make the usage of HD-code (hard deadline) more
explicit - again to prevent broken invariants by MBMs.

# 4.) FRAME (general changes)

## `frame_system` pallet

A new memorize storage item `InherentsApplied` is added. It is used by
executive to track whether inherents have already been applied.
Executive and can then execute the MBMs directly between inherents and
transactions.

The `Config` gets five new items:
- `SingleBlockMigrations` this is the new way of configuring migrations
that run in a single block. Previously they were defined as last generic
argument of `Executive`. This shift is brings all central configuration
about migrations closer into view of the developer (migrations that are
configured in `Executive` will still work for now but is deprecated).
- `MultiBlockMigrator` this can be configured to an engine that drives
MBMs. One example would be the `pallet_migrations`. Note that this is
only the engine; the exact MBMs are injected into the engine.
- `PreInherents` a callback that executes after `on_initialize` but
before inherents.
- `PostInherents` a callback that executes after all inherents ran
(including MBMs and `poll`).
- `PostTransactions` in symmetry to `PreInherents`, this one is called
before `on_finalize` but after all transactions.

A sane default is to set all of these to `()`. Example diff suitable for
any chain:
```patch
@@ impl frame_system::Config for Test {
 	type MaxConsumers = ConstU32<16>;
+	type SingleBlockMigrations = ();
+	type MultiBlockMigrator = ();
+	type PreInherents = ();
+	type PostInherents = ();
+	type PostTransactions = ();
 }
```

An overview of how the block execution now looks like is here. The same
graph is also in the rust doc.

<details><summary>Block Execution Flow</summary>
<p>

![Screenshot 2023-12-04 at 19 11
29](https://github.com/paritytech/polkadot-sdk/assets/10380170/e88a80c4-ef11-4faa-8df5-8b33a724c054)

</p>
</details> 

## Inherent Order

Moved to https://github.com/paritytech/polkadot-sdk/pull/2154

---------------


## TODO

- [ ] Check that `try-runtime` still works
- [ ] Ensure backwards compatibility with old Runtime APIs
- [x] Consume weight correctly
- [x] Cleanup

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Juan Girini <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Gavin Wood <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

## Problem
During the bumping of the `polkadot-fellows` repository to
`[email protected]`, I encountered a situation where the benchmarks
`teleport_assets` and `reserve_transfer_assets` in AssetHubKusama
started to fail. This issue arose due to a decreased ED balance for
AssetHubs introduced
[here](https://github.com/polkadot-fellows/runtimes/pull/158/files#diff-80668ff8e793b64f36a9a3ec512df5cbca4ad448c157a5d81abda1b15f35f1daR213),
and also because of a [missing CI
pipeline](https://github.com/polkadot-fellows/runtimes/issues/197) to
check the benchmarks, which went unnoticed.

These benchmarks expect the `caller` to have enough:
1. balance to transfer (BTT)
2. balance for paying delivery (BFPD).
 
So the initial balance was calculated as `ED * 100`, which seems
reasonable:
```
const ED_MULTIPLIER: u32 = 100;
let balance = existential_deposit.saturating_mul(ED_MULTIPLIER.into());`
```
The problem arises when the price for delivery is 100 times higher than
the existential deposit. In other words, when `ED * 100` does not cover
`BTT` + `BFPD`.

I check AHR/AHW/AHK/AHP and this problem has only AssetHubKusama
```
ED: 3333333
calculated price to parent delivery:  1031666634  (from xcm logs from the benchmark)
---

3333333 * 100 - BTT(3333333) - BFPD(1031666634) = −701666667
```
which results in the error;
```
2024-02-23 09:19:42 Unable to charge fee with error Module(ModuleError { index: 31, error: [17, 0, 0, 0], message: Some("FeesNotMet") })
Error: Input("Benchmark pallet_xcm::reserve_transfer_assets failed: FeesNotMet")
     
```

## Solution

The benchmarks `teleport_assets` and `reserve_transfer_assets` were
fixed by removing `ED * 100` and replacing it with `DeliveryHelper`
logic, which calculates the (almost real) price for delivery and sets it
along with the existential deposit as the initial balance for the
account used in the benchmark.


## TODO

- [ ] patch for 1.6 -
https://github.com/paritytech/polkadot-sdk/pull/3466
- [ ] patch for 1.7 -
https://github.com/paritytech/polkadot-sdk/pull/3465
- [ ] patch for 1.8 - TODO: PR

---------

Co-authored-by: Francisco Aguirre <[email protected]>

from Westend and Rococo.

---------

Co-authored-by: eskimor <[email protected]>
Co-authored-by: command-bot <>

Lifting some more dependencies to the workspace. Just using the
most-often updated ones for now.
It can be reproduced locally.

```sh
# First you can check if there would be semver incompatible bumps (looks good in this case):
$ zepter transpose dependency lift-to-workspace --ignore-errors syn quote thiserror "regex:^serde.*"

# Then apply the changes:
$ zepter transpose dependency lift-to-workspace --version-resolver=highest syn quote thiserror "regex:^serde.*" --fix

# And format the changes:
$ taplo format --config .config/taplo.toml
```

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

This is a follow-up for `im-online` pallet removal that is cleaning up
its off-chain storage. Must be merged no earlier than #2265 is enacted.
Related: #1964

---------

Co-authored-by: Bastian Köcher <[email protected]>

A follow-up of #2265. Removes weights no longer needed.

Bumps the known_good_semver group with 6 updates:

| Package | From | To |
| --- | --- | --- |
| [serde](https://github.com/serde-rs/serde) | `1.0.195` | `1.0.196` |
| [serde_json](https://github.com/serde-rs/json) | `1.0.111` | `1.0.113`
|
| [clap](https://github.com/clap-rs/clap) | `4.4.18` | `4.5.0` |
| [syn](https://github.com/dtolnay/syn) | `2.0.48` | `2.0.49` |
| [serde_yaml](https://github.com/dtolnay/serde-yaml) | `0.9.30` |
`0.9.31` |
| [serde_derive](https://github.com/serde-rs/serde) | `1.0.195` |
`1.0.196` |

Updates `serde` from 1.0.195 to 1.0.196
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/serde/releases">serde's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.196</h2>
<ul>
<li>Improve formatting of &quot;invalid type&quot; error messages
involving floats (<a
href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/serde/commit/ede9762a583c3cc3b87c10a53551828fad339525"><code>ede9762</code></a>
Release 1.0.196</li>
<li><a
href="https://github.com/serde-rs/serde/commit/d438c2d67bf30e3edab31c2272c4829c12cf4cb5"><code>d438c2d</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>
from dtolnay/decimalpoint</li>
<li><a
href="https://github.com/serde-rs/serde/commit/bef110b92a171ac568a47339f5bd97938a8c9da2"><code>bef110b</code></a>
Format Unexpected::Float with decimal point</li>
<li><a
href="https://github.com/serde-rs/serde/commit/b971ef11d1b53da7673e0c8199e87509c003c1a8"><code>b971ef1</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2681">#2681</a>
from dtolnay/workspacedeps</li>
<li><a
href="https://github.com/serde-rs/serde/commit/29d9f693996d199748136d5561a971ed68626724"><code>29d9f69</code></a>
Fix workspace.dependencies default-features future compat warning</li>
<li><a
href="https://github.com/serde-rs/serde/commit/aecb4083bde754155752f5d7d442b64eb7dc636f"><code>aecb408</code></a>
Sort workspace dependencies</li>
<li><a
href="https://github.com/serde-rs/serde/commit/1c675ab3a38e46df4e62465800970f8b20a2055d"><code>1c675ab</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2678">#2678</a>
from rodoufu/workspaceDependencies</li>
<li><a
href="https://github.com/serde-rs/serde/commit/dd619630a337139424725697ccd9a9f7596a2d3a"><code>dd61963</code></a>
Adding workspace dependencies</li>
<li><a
href="https://github.com/serde-rs/serde/commit/111803ab0768d010c606f2fc0d0add12750d5eef"><code>111803a</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2673">#2673</a>
from Sky9x/msrv-badge</li>
<li><a
href="https://github.com/serde-rs/serde/commit/0024f74f34fbbdc44a7b22457faebe36c5cbe7f8"><code>0024f74</code></a>
Use shields.io's MSRV badges</li>
<li>See full diff in <a
href="https://github.com/serde-rs/serde/compare/v1.0.195...v1.0.196">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_json` from 1.0.111 to 1.0.113
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/json/releases">serde_json's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.113</h2>
<ul>
<li>Add <code>swap_remove</code> and <code>shift_remove</code> methods
on Map (<a
href="https://redirect.github.com/serde-rs/json/issues/1109">#1109</a>)</li>
</ul>
<h2>v1.0.112</h2>
<ul>
<li>Improve formatting of &quot;invalid type&quot; error messages
involving floats (<a
href="https://redirect.github.com/serde-rs/json/issues/1107">#1107</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/json/commit/09d865b34b9701be52764dc9bf571b1a16e9d3dc"><code>09d865b</code></a>
Release 1.0.113</li>
<li><a
href="https://github.com/serde-rs/json/commit/5aeab4eaf69d7959f013f8081865c264d6c00551"><code>5aeab4e</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1109">#1109</a>
from serde-rs/remove</li>
<li><a
href="https://github.com/serde-rs/json/commit/ca3c2ca3696cab79b8b279be7569ee1647250f1e"><code>ca3c2ca</code></a>
Add swap_remove and shift_remove methods on Map</li>
<li><a
href="https://github.com/serde-rs/json/commit/7fece969e3b480ec620419d65c2aeb08776bebcb"><code>7fece96</code></a>
Release 1.0.112</li>
<li><a
href="https://github.com/serde-rs/json/commit/6a6d2bbd9e8b8bd72573b863f12a4ec991f33232"><code>6a6d2bb</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1107">#1107</a>
from serde-rs/unexpectedfloat</li>
<li><a
href="https://github.com/serde-rs/json/commit/83d7bad54ba5db3a44198d6df0ff2e81621683fa"><code>83d7bad</code></a>
Format f64 in error messages using ryu</li>
<li><a
href="https://github.com/serde-rs/json/commit/107c2d1c42817f0d71f07a4d5b0ea2f29dbce8b8"><code>107c2d1</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1106">#1106</a>
from serde-rs/invalidvalue</li>
<li><a
href="https://github.com/serde-rs/json/commit/62ca3e4c01c2e62cd5c2a32e9104f386e5ce7808"><code>62ca3e4</code></a>
Handle Unexpected::Unit in Error::invalid_value</li>
<li><a
href="https://github.com/serde-rs/json/commit/296fafb8f32e8442ef8e4d5725c15ffca726b288"><code>296fafb</code></a>
Factor out JSON-specific Display impl for serde::de::Unexpected</li>
<li><a
href="https://github.com/serde-rs/json/commit/e56cc696bd7c112e5dd4ccfa23d094c3a1c1c1ff"><code>e56cc69</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1105">#1105</a>
from keienWang/master</li>
<li>Additional commits viewable in <a
href="https://github.com/serde-rs/json/compare/v1.0.111...v1.0.113">compare
view</a></li>
</ul>
</details>
<br />

Updates `clap` from 4.4.18 to 4.5.0
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.5.0] - 2024-02-08</h2>
<h3>Compatibility</h3>
<ul>
<li>Update MSRV to 1.74</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/a751c5fe65cd33cb09e85ff3039b4fd0182cdb6e"><code>a751c5f</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/9ec6c942b81c370a8c14652e42295933244555ac"><code>9ec6c94</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/0735119775c2d27fef6b3c232cb9ef2fcbbd963f"><code>0735119</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/c4d3959506f5068f86ffb7ab34b622bd2da40dd8"><code>c4d3959</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5344">#5344</a>
from epage/encode</li>
<li><a
href="https://github.com/clap-rs/clap/commit/f750e577789e1dd34c6950d8c8fe16d1bfd1f49c"><code>f750e57</code></a>
fix(lex): Use new-ish OsStr API</li>
<li><a
href="https://github.com/clap-rs/clap/commit/1d9a554cdfddffcb92d197706b9720e2760cb443"><code>1d9a554</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5343">#5343</a>
from epage/msrv</li>
<li><a
href="https://github.com/clap-rs/clap/commit/4b45d361b1b96eb1f37b7d1db2684203ca828a94"><code>4b45d36</code></a>
chore: Update MSRV to 1.74</li>
<li><a
href="https://github.com/clap-rs/clap/commit/55b1f945157d4d0e480dea6c492e04d0b541088a"><code>55b1f94</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5342">#5342</a>
from epage/divan</li>
<li><a
href="https://github.com/clap-rs/clap/commit/ea77b98da3f321069ae136a241a2d266c2b28bd7"><code>ea77b98</code></a>
test(complete): Make it order independent</li>
<li><a
href="https://github.com/clap-rs/clap/commit/b0fea2bac60819bdb042e10c032817fded67f815"><code>b0fea2b</code></a>
test(bench): Switch to divan</li>
<li>Additional commits viewable in <a
href="https://github.com/clap-rs/clap/compare/v4.4.18...clap_complete-v4.5.0">compare
view</a></li>
</ul>
</details>
<br />

Updates `syn` from 2.0.48 to 2.0.49
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/syn/releases">syn's
releases</a>.</em></p>
<blockquote>
<h2>2.0.49</h2>
<ul>
<li>Improve error location when parsing from an empty string literal
using <code>LitStr::parse</code> (<a
href="https://redirect.github.com/dtolnay/syn/issues/1590">#1590</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/syn/commit/e64c0636042bcd8cf56f9e6c3e828a49cb434649"><code>e64c063</code></a>
Release 2.0.49</li>
<li><a
href="https://github.com/dtolnay/syn/commit/981359c5f46f25f3db42d1b341cc607f634688e7"><code>981359c</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1590">#1590</a>
from dtolnay/streof</li>
<li><a
href="https://github.com/dtolnay/syn/commit/51298d40a447b9e5b3cd8c898c2ea9d24b31cd6d"><code>51298d4</code></a>
Improve error location at eof in LitStr::parse</li>
<li><a
href="https://github.com/dtolnay/syn/commit/270c63384a9d891f65880a03a5a92f0bf4605bbf"><code>270c633</code></a>
Update test suite to nightly-2024-02-13</li>
<li><a
href="https://github.com/dtolnay/syn/commit/dc9cf16b9b0601d2d393d059c46a8f8e0220cc21"><code>dc9cf16</code></a>
Remove FilterAttrs trait when unused</li>
<li><a
href="https://github.com/dtolnay/syn/commit/7dcfac79eda716fa806d68cc0aa811f3be717dc0"><code>7dcfac7</code></a>
Ignore dead_code warning in test</li>
<li><a
href="https://github.com/dtolnay/syn/commit/98318441089f9a9bb596fc010ed14c3b593d4bda"><code>9831844</code></a>
Update signature of Emitter::emit_diagnostic in nightly-2024-02-07</li>
<li><a
href="https://github.com/dtolnay/syn/commit/9e8033f63da93dfb6a3e698449c6edff5e56727d"><code>9e8033f</code></a>
Update test suite to nightly-2024-02-07</li>
<li><a
href="https://github.com/dtolnay/syn/commit/cb3348cd94be50995054796facdfa055b6e0e9e8"><code>cb3348c</code></a>
Update test suite to nightly-2024-01-23</li>
<li><a
href="https://github.com/dtolnay/syn/commit/15b9dbcd67bc56f3da7d33bbede46f7380fc7164"><code>15b9dbc</code></a>
Update test suite to nightly-2024-01-19</li>
<li>Additional commits viewable in <a
href="https://github.com/dtolnay/syn/compare/2.0.48...2.0.49">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_yaml` from 0.9.30 to 0.9.31
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/serde-yaml/releases">serde_yaml's
releases</a>.</em></p>
<blockquote>
<h2>0.9.31</h2>
<ul>
<li>Add <code>swap_remove</code> and <code>shift_remove</code> methods
on Mapping (<a
href="https://redirect.github.com/dtolnay/serde-yaml/issues/408">#408</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/2a77483b23897115bdd69af32ae34d593268d555"><code>2a77483</code></a>
Release 0.9.31</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/d8d1a839cf42ef4627c66bebd743f5fecd24e3ed"><code>d8d1a83</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/serde-yaml/issues/408">#408</a>
from dtolnay/remove</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/f8a99a496836ccfa6c547af9136986d13011be98"><code>f8a99a4</code></a>
Add swap_remove and shift_remove methods on Mapping</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/8b26413e3307e39329dc68a96b065058aec38f9a"><code>8b26413</code></a>
Work around dead_code warning in tests</li>
<li>See full diff in <a
href="https://github.com/dtolnay/serde-yaml/compare/0.9.30...0.9.31">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_derive` from 1.0.195 to 1.0.196
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/serde/releases">serde_derive's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.196</h2>
<ul>
<li>Improve formatting of &quot;invalid type&quot; error messages
involving floats (<a
href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/serde/commit/ede9762a583c3cc3b87c10a53551828fad339525"><code>ede9762</code></a>
Release 1.0.196</li>
<li><a
href="https://github.com/serde-rs/serde/commit/d438c2d67bf30e3edab31c2272c4829c12cf4cb5"><code>d438c2d</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>
from dtolnay/decimalpoint</li>
<li><a
href="https://github.com/serde-rs/serde/commit/bef110b92a171ac568a47339f5bd97938a8c9da2"><code>bef110b</code></a>
Format Unexpected::Float with decimal point</li>
<li><a
href="https://github.com/serde-rs/serde/commit/b971ef11d1b53da7673e0c8199e87509c003c1a8"><code>b971ef1</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2681">#2681</a>
from dtolnay/workspacedeps</li>
<li><a
href="https://github.com/serde-rs/serde/commit/29d9f693996d199748136d5561a971ed68626724"><code>29d9f69</code></a>
Fix workspace.dependencies default-features future compat warning</li>
<li><a
href="https://github.com/serde-rs/serde/commit/aecb4083bde754155752f5d7d442b64eb7dc636f"><code>aecb408</code></a>
Sort workspace dependencies</li>
<li><a
href="https://github.com/serde-rs/serde/commit/1c675ab3a38e46df4e62465800970f8b20a2055d"><code>1c675ab</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2678">#2678</a>
from rodoufu/workspaceDependencies</li>
<li><a
href="https://github.com/serde-rs/serde/commit/dd619630a337139424725697ccd9a9f7596a2d3a"><code>dd61963</code></a>
Adding workspace dependencies</li>
<li><a
href="https://github.com/serde-rs/serde/commit/111803ab0768d010c606f2fc0d0add12750d5eef"><code>111803a</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2673">#2673</a>
from Sky9x/msrv-badge</li>
<li><a
href="https://github.com/serde-rs/serde/commit/0024f74f34fbbdc44a7b22457faebe36c5cbe7f8"><code>0024f74</code></a>
Use shields.io's MSRV badges</li>
<li>See full diff in <a
href="https://github.com/serde-rs/serde/compare/v1.0.195...v1.0.196">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Fixes #3014 

This PR adds retry mechanics to `pallet-scheduler`, as described in the
issue above.

Users can now set a retry configuration for a task so that, in case its
scheduled run fails, it will be retried after a number of blocks, for a
specified number of times or until it succeeds.

If a retried task runs successfully before running out of retries, its
remaining retry counter will be reset to the initial value. If a retried
task runs out of retries, it will be removed from the schedule.

Tasks which need to be scheduled for a retry are still subject to weight
metering and agenda space, same as a regular task. Periodic tasks will
have their periodic schedule put on hold while the task is retrying.

---------

Signed-off-by: georgepisaltu <[email protected]>
Co-authored-by: command-bot <>

I found out during the cleanup of this deprecation message in the
`polkadot-fellows` repository that we deprecated `CurrencyAdapter`
without making the recommended changes.


## TODO
- [ ] fix `polkadot-fellows` bump to 1.6.0
https://github.com/polkadot-fellows/runtimes/pull/159

---------

Co-authored-by: Francisco Aguirre <[email protected]>

Changes (partial https://github.com/paritytech/polkadot-sdk/issues/994):
- Set log to `0.4.20` everywhere
- Lift `log` to the workspace

Starting with a simpler one after seeing
https://github.com/paritytech/polkadot-sdk/pull/2065 from @jsdw

.
This sets the `default-features` to `false` in the root and then
overwrites that in each create to its original value. This is necessary
since otherwise the `default` features are additive and its impossible
to disable them in the crate again once they are enabled in the
workspace.

I am using a tool to do this, so its mostly a test to see that it works
as expected.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

This PR backports version bumps from `1.7.0` release branch and moves
related prdoc files to the appropriate folder.

Relates to: https://github.com/paritytech/polkadot-sdk/issues/3214

## TODO

- [ ] backport to the `1.7.0` release

Superseeds https://github.com/paritytech/polkadot-sdk/pull/1245  

This PR is a migration of the
https://github.com/paritytech/substrate/pull/14577.

The PR added associated types (`AddOrigin` & `RemoveOrigin`) to
`Config`. It allows you to decouple types and areas of responsibility,
since at the moment the same types are responsible for adding and
promoting(removing and demoting). This will improve the flexibility of
the pallet configuration.

```
/// The origin required to add a member.
type AddOrigin: EnsureOrigin<Self::RuntimeOrigin, Success = ()>;

/// The origin required to remove a member. The success value indicates the
/// maximum rank *from which* the removal may be.
type RemoveOrigin: EnsureOrigin<Self::RuntimeOrigin, Success = Rank>;
```
To achieve the backward compatibility, the users of the pallet can use
the old type via the new morph:

```
type AddOrigin = MapSuccess<Self::PromoteOrigin, Ignore>;
type RemoveOrigin = Self::DemoteOrigin;
```

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: PraetorP <[email protected]>
Co-authored-by: Pavel Orlov <[email protected]>

Fixup for https://github.com/paritytech/polkadot-sdk/pull/2587 to make
the `core-fellowship` crate work with swapped members.

Adds a `MemberSwappedHandler` to the `ranked-collective` pallet that are
implemented by `core-fellowship+salary`.
There is are exhaustive tests
[here](https://github.com/paritytech/polkadot-sdk/blob/72aa7ac1/substrate/frame/core-fellowship/src/tests/integration.rs#L338)
and
[here](https://github.com/paritytech/polkadot-sdk/blob/ab3cdb05

/substrate/frame/salary/src/tests/integration.rs#L224)
to check that adding member `1` is equivalent to adding member `0` and
then swapping.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

[frame] `#[pallet::composite_enum]` improved variant count handling + removed `pallet_balances`'s `MaxHolds` config (#2657)

I started this investigation/issue based on @liamaharon

 question
[here](https://github.com/paritytech/polkadot-sdk/pull/1801#discussion_r1410452499).

## Problem

The `pallet_balances` integrity test should correctly detect that the
runtime has correct distinct `HoldReasons` variant count. I assume the
same situation exists for RuntimeFreezeReason.

It is not a critical problem, if we set `MaxHolds` with a sufficiently
large value, everything should be ok. However, in this case, the
integrity_test check becomes less useful.

**Situation for "any" runtime:**
- `HoldReason` enums from different pallets:
```rust
        /// from pallet_nis
        #[pallet::composite_enum]
	pub enum HoldReason {
		NftReceipt,
	}

        /// from pallet_preimage
        #[pallet::composite_enum]
	pub enum HoldReason {
		Preimage,
	}

        // from pallet_state-trie-migration
        #[pallet::composite_enum]
	pub enum HoldReason {
		SlashForContinueMigrate,
		SlashForMigrateCustomTop,
		SlashForMigrateCustomChild,
	}
```

- generated `RuntimeHoldReason` enum looks like:
```rust
pub enum RuntimeHoldReason {

    #[codec(index = 32u8)]
    Preimage(pallet_preimage::HoldReason),

    #[codec(index = 38u8)]
    Nis(pallet_nis::HoldReason),

    #[codec(index = 42u8)]
    StateTrieMigration(pallet_state_trie_migration::HoldReason),
}
```

- composite enum `RuntimeHoldReason` variant count is detected as `3`
- we set `type MaxHolds = ConstU32<3>`
- `pallet_balances::integrity_test` is ok with `3`(at least 3)

However, the real problem can occur in a live runtime where some
functionality might stop working. This is due to a total of 5 distinct
hold reasons (for pallets with multi-instance support, it is even more),
and not all of them can be used because of an incorrect `MaxHolds`,
which is deemed acceptable according to the `integrity_test`:
  ```
  // pseudo-code - if we try to call all of these:

T::Currency::hold(&pallet_nis::HoldReason::NftReceipt.into(),
&nft_owner, deposit)?;
T::Currency::hold(&pallet_preimage::HoldReason::Preimage.into(),
&nft_owner, deposit)?;

T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForContinueMigrate.into(),
&nft_owner, deposit)?;

  // With `type MaxHolds = ConstU32<3>` these two will fail

T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomTop.into(),
&nft_owner, deposit)?;

T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomChild.into(),
&nft_owner, deposit)?;
  ```  


## Solutions

A macro `#[pallet::*]` expansion is extended of `VariantCount`
implementation for the `#[pallet::composite_enum]` enum type. This
expansion generates the `VariantCount` implementation for pallets'
`HoldReason`, `FreezeReason`, `LockId`, and `SlashReason`. Enum variants
must be plain enum values without fields to ensure a deterministic
count.

The composite runtime enum, `RuntimeHoldReason` and
`RuntimeFreezeReason`, now sets `VariantCount::VARIANT_COUNT` as the sum
of pallets' enum `VariantCount::VARIANT_COUNT`:
```rust
#[frame_support::pallet(dev_mode)]
mod module_single_instance {

	#[pallet::composite_enum]
	pub enum HoldReason {
		ModuleSingleInstanceReason1,
		ModuleSingleInstanceReason2,
	}
...
}

#[frame_support::pallet(dev_mode)]
mod module_multi_instance {

	#[pallet::composite_enum]
	pub enum HoldReason<I: 'static = ()> {
		ModuleMultiInstanceReason1,
		ModuleMultiInstanceReason2,
		ModuleMultiInstanceReason3,
	}
...
}


impl self::sp_api_hidden_includes_construct_runtime::hidden_include::traits::VariantCount
    for RuntimeHoldReason
{
    const VARIANT_COUNT: u32 = 0
        + module_single_instance::HoldReason::VARIANT_COUNT
        + module_multi_instance::HoldReason::<module_multi_instance::Instance1>::VARIANT_COUNT
        + module_multi_instance::HoldReason::<module_multi_instance::Instance2>::VARIANT_COUNT
        + module_multi_instance::HoldReason::<module_multi_instance::Instance3>::VARIANT_COUNT;
}
```

In addition, `MaxHolds` is removed (as suggested
[here](https://github.com/paritytech/polkadot-sdk/pull/2657#discussion_r1443324573))
from `pallet_balances`, and its `Holds` are now bounded to
`RuntimeHoldReason::VARIANT_COUNT`. Therefore, there is no need to let
the runtime specify `MaxHolds`.


## For reviewers

Relevant changes can be found here:
- `substrate/frame/support/procedural/src/lib.rs` 
-  `substrate/frame/support/procedural/src/pallet/parse/composite.rs`
-  `substrate/frame/support/procedural/src/pallet/expand/composite.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/composite_helper.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/hold_reason.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/freeze_reason.rs`
- `substrate/frame/support/src/traits/misc.rs`

And the rest of the files is just about removed `MaxHolds` from
`pallet_balances`

## Next steps

Do the same for `MaxFreezes`
https://github.com/paritytech/polkadot-sdk/issues/2997.

---------

Co-authored-by: command-bot <>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Dónal Murray <[email protected]>
Co-authored-by: gupnik <[email protected]>

Add `Balances::force_adjust_total_issuance` as preparation for fixing
https://github.com/polkadot-fellows/runtimes/issues/147.
Important changes in `substrate/frame/balances/src/lib.rs`.

TODO:
- [x] Update weights

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Bastian Köcher <[email protected]>

closes https://github.com/polkadot-fellows/help-center/issues/1

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

Moves `pallet_mmr` back behind `pallet_session` to address
polkadot-fellows/runtimes#160.

Opening draft for CI - should be merged or closed depending on outcome
of w3f/polkadot-spec#718.

---------

Co-authored-by: Adrian Catangiu <[email protected]>

Related https://github.com/paritytech/polkadot-sdk/issues/3032

---

Using https://github.com/liamaharon/cargo-workspace-version-tools/ 

`cargo run -- sync --path ../polkadot-sdk`

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

Moved from: https://github.com/paritytech/polkadot/pull/6951

closes https://github.com/paritytech/polkadot-sdk/issues/490

- [x] update cumulus

--- 
This PR introduces transactional processing of certain xcm instructions.
For the list of instructions checkout
https://github.com/paritytech/polkadot-sdk/issues/490. The transactional
processing is implemented as an xcm-executor config item. The two
implementations in this PR are `FrameTransactionalProcessor` and `()`.
The `()` implementation does no transactional processing. Each
implementation of the `ProcessTransaction` trait has an
`IS_TRANSACTIONAL` const that tells the XCVM if transactional processing
is actually implemented. If Transactional processing is implemented,
changes to touched registers should also be rolled back to prevent
inconsistencies.


Note for reviewers:
Check out the following safety assumption:
https://github.com/paritytech/polkadot-sdk/pull/1222/files#diff-4effad7d8c1c9de19fd27e18661cbf2128c8718f3b2420a27d2f816e0749ea53R30

---------

Co-authored-by: Keith Yeung <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: command-bot <>

## Summary

This PR consolidates `pallet-state-trie-migration` as a part of
https://github.com/paritytech/polkadot-sdk/issues/226 /
https://github.com/paritytech/polkadot-sdk/issues/171:

`pallet-state-trie-migration`:
- [x] replace `Currency` with `fungible` traits
- [x] run benchmarks
- [x] refactor to `DefaultConfig`

`pallet_nicks`:
- [x]  remove

others:
- [x] remove `as Fn*` or `asFun*` stuff based on discussion
[here](https://github.com/paritytech/polkadot-sdk/issues/226#issuecomment-1822861445)

---------

Co-authored-by: Richard Melkonian <[email protected]>
Co-authored-by: command-bot <>

There were several improvements and PRs that didn't apply to all
runtimes, so this PR attempts to align those small differences. In
addition, the PR eliminates unused dependencies across multiple modules.

Relates to PR for `polkadot-fellows`:
https://github.com/polkadot-fellows/runtimes/pull/154

Clean up all the old syntax.

---------

Co-authored-by: command-bot <>
Co-authored-by: gupnik <[email protected]>
Co-authored-by: Nikhil Gupta <[email protected]>
Co-authored-by: Maksym H <[email protected]>

Backport of https://github.com/paritytech/polkadot-sdk/pull/1863 to
master

Extend candidate sanitation in paras_inherent by removing backing votes
from disabled validators. Check
https://github.com/paritytech/polkadot-sdk/issues/1592 for more details.

This change is related to the disabling strategy implementation
(https://github.com/paritytech/polkadot-sdk/pull/2226).

---------

Co-authored-by: ordian <[email protected]>
Co-authored-by: ordian <[email protected]>
Co-authored-by: Maciej <[email protected]>

Order:

- [x] Start People Chain
- [RPC
node](https://polkadot.js.org/apps/?rpc=wss%3A%2F%2Frococo-people-rpc.polkadot.io#/explorer)
- [x] Upgrade Rococo Relay (`EnsureRoot` -> `EnsureSigned`) (v1,006,002)
- Done
[here](https://rococo.subscan.io/extrinsic/0xef07e0f9dbb2b9e829305f132e6ce45d291239286e409177e20895e6687daa6c)
- [x] Migrate all identities
- Done, see extrinsics from [this
account](https://rococo.subscan.io/account/5FyNYrBwndvBttTkGUqGGCRAXtBH4Mh8xELDaxaFywTsjDKb)
- [x] Upgrade Rococo People (remove call filter) (v1,006,002)
- Authorized
[here](https://rococo.subscan.io/extrinsic/0xedf6a80229bd411b7ed8d3a489a767b0f773bed5c49239987a294c293a35b98b)

With added:

- [x] Upgrade Rococo People to fix `poke_deposit` bug (v1,006,001)
- Authorized
[here](https://rococo.subscan.io/extrinsic/0xd1dc3cd6e8274bd0196f8d9f13ed09f6e9c76e6a40f9786a1629f4cb22cf948d)

Note:

It's also possible to remove the Identity Migrator pallet from both the
Relay Chain and the parachain at this time. I will leave them in for now
to preserve the test cases until we run them on Kusama/Polkadot. We will
also want a follow up to remove all Identity-related state from the
Relay Chain.

# Note for reviewer

Most changes are just syntax changes necessary for the new version.
Most important files should be the ones under the `xcm` folder.

# Description 

Added XCMv4.

## Removed `Multi` prefix
The following types have been renamed:
- MultiLocation -> Location
- MultiAsset -> Asset
- MultiAssets -> Assets
- InteriorMultiLocation -> InteriorLocation
- MultiAssetFilter -> AssetFilter
- VersionedMultiAsset -> VersionedAsset
- WildMultiAsset -> WildAsset
- VersionedMultiLocation -> VersionedLocation

In order to fix a name conflict, the `Assets` in `xcm-executor` were
renamed to `HoldingAssets`, as they represent assets in holding.

## Removed `Abstract` asset id

It was not being used anywhere and this simplifies the code.

Now assets are just constructed as follows:

```rust
let asset: Asset = (AssetId(Location::new(1, Here)), 100u128).into();
```

No need for specifying `Concrete` anymore.

## Outcome is now a named fields struct

Instead of

```rust
pub enum Outcome {
  Complete(Weight),
  Incomplete(Weight, Error),
  Error(Error),
}
```

we now have

```rust
pub enum Outcome {
  Complete { used: Weight },
  Incomplete { used: Weight, error: Error },
  Error { error: Error },
}
```

## Added Reanchorable trait

Now both locations and assets implement this trait, making it easier to
reanchor both.

## New syntax for building locations and junctions

Now junctions are built using the following methods:

```rust
let location = Location {
    parents: 1,
    interior: [Parachain(1000), PalletInstance(50), GeneralIndex(1984)].into()
};
```

or

```rust
let location = Location::new(1, [Parachain(1000), PalletInstance(50), GeneralIndex(1984)]);
```

And they are matched like so:

```rust
match location.unpack() {
  (1, [Parachain(id)]) => ...
  (0, Here) => ...,
  (1, [_]) => ...,
}
```

This syntax is mandatory in v4, and has been also implemented for v2 and
v3 for easier migration.

This was needed to make all sizes smaller.

# TODO
- [x] Scaffold v4
- [x] Port github.com/paritytech/polkadot/pull/7236
- [x] Remove `Multi` prefix
- [x] Remove `Abstract` asset id

---------

Co-authored-by: command-bot <>
Co-authored-by: Keith Yeung <[email protected]>

Co-authored-by: command-bot <>

This PR allows _username authorities_ to issue unique usernames that
correspond with an account. It also provides two-way lookup, that is
from `AccountId` to a single, "primary" `Username` (alongside
`Registration`) and multiple unique `Username`s to an `AccountId`.

Key features:

- Username Authorities added (and removed) via privileged origin.
- Authorities have a `suffix` and an `allocation`. They can grant up to
`allocation` usernames. Their `suffix` will be appended to the usernames
that they issue. A suffix may be up to 7 characters long.
- Users can ask an authority to grant them a username. This will take
the form `myusername.suffix`. The entire name (including suffix) must be
less than or equal to 32 alphanumeric characters.
- Users can approve a username for themselves in one of two ways (that
is, authorities cannot grant them arbitrarily):
- Pre-sign the entire username (including suffix) with a secret key that
corresponds to their `AccountId` (for keyed accounts, obviously); or
- Accept the username after it has been granted by an authority (it will
be queued until accepted) (for non-keyed accounts like pure proxies or
multisigs).
- The system does not require any funds or deposits. Users without an
identity will be given a default one (presumably all fields set to
`None`). If they update this info, they will need to place the normal
storage deposit.
- If a user does not have any username, their first one will be set as
`Primary`, and their `AccountId` will map to that one. If they get
subsequent usernames, they can choose which one to be their primary via
`set_primary_username`.
- There are some state cleanup functions to remove expired usernames
that have not been accepted and dangling usernames whose owners have
called `clear_identity`.

TODO:

- [x] Add migration to runtimes
- [x] Probably do off-chain migration into People Chain genesis
- [x] Address a few TODO questions in code (please review)

---------

Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Gonçalo Pestana <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Dónal Murray <[email protected]>

Bumps the known_good_semver group with 4 updates:
[serde](https://github.com/serde-rs/serde),
[serde_json](https://github.com/serde-rs/json),
[clap](https://github.com/clap-rs/clap) and
[syn](https://github.com/dtolnay/syn).

Updates `serde` from 1.0.194 to 1.0.195
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/serde/releases">serde's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.195</h2>
<ul>
<li>Prevent remote definitions of tuple struct or tuple variant from
triggering dead_code warning (<a
href="https://redirect.github.com/serde-rs/serde/issues/2671">#2671</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/serde/commit/03eec42c3313b36da416be1486e9ecac345784d5"><code>03eec42</code></a>
Release 1.0.195</li>
<li><a
href="https://github.com/serde-rs/serde/commit/196f311ae2fd8ad94fe38a57830419859a4d3dbb"><code>196f311</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2671">#2671</a>
from dtolnay/deadremote</li>
<li><a
href="https://github.com/serde-rs/serde/commit/38d9e0b2091e9b6150486c2c37367819b86bcc39"><code>38d9e0b</code></a>
Revert &quot;Add FIXME to fix dead_code warning when using
serde(remote)&quot;</li>
<li><a
href="https://github.com/serde-rs/serde/commit/6502b3131697eff6420786ad71f87f29cfff3a13"><code>6502b31</code></a>
Fix new dead_code warning in tuple struct and tuple variant remote
defs</li>
<li><a
href="https://github.com/serde-rs/serde/commit/6f1a8c3115c8d2502178c25d610fbaee2e82c46b"><code>6f1a8c3</code></a>
Add FIXME to fix dead_code warning when using serde(remote)</li>
<li><a
href="https://github.com/serde-rs/serde/commit/d883c94cc9fe72d0512dc7f4def7191a401595c9"><code>d883c94</code></a>
Work around dead_code warning in tests</li>
<li><a
href="https://github.com/serde-rs/serde/commit/961fa59a7469c5b5e323b9723323df412048d60d"><code>961fa59</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2670">#2670</a>
from serde-rs/exhaustive</li>
<li><a
href="https://github.com/serde-rs/serde/commit/8bc71def551df190e6817d3311e5c76f751f53e6"><code>8bc71de</code></a>
Fill in omitted patterns for GenericArguments match</li>
<li><a
href="https://github.com/serde-rs/serde/commit/7c65a9dc0eab2d4d829b258a7b3549351bbe8dcd"><code>7c65a9d</code></a>
Pick up changes to non_exhaustive_omitted_patterns lint</li>
<li>See full diff in <a
href="https://github.com/serde-rs/serde/compare/v1.0.194...v1.0.195">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_json` from 1.0.110 to 1.0.111
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/json/releases">serde_json's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.111</h2>
<ul>
<li>Improve floating point parsing performance on loongarch64 (<a
href="https://redirect.github.com/serde-rs/json/issues/1100">#1100</a>,
thanks <a
href="https://github.com/heiher"><code>@​heiher</code></a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/json/commit/0131ac68212e8094bd14ee618587d731b4f9a68b"><code>0131ac6</code></a>
Release 1.0.111</li>
<li><a
href="https://github.com/serde-rs/json/commit/96ecfadd3f7dd6366a2d07a098e228d15df93cb4"><code>96ecfad</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1100">#1100</a>
from heiher/limb-64-la64</li>
<li><a
href="https://github.com/serde-rs/json/commit/c80dbaf8ff5902ca670e0a48bbe495065b9314f5"><code>c80dbaf</code></a>
Set limb width to 64 for loongarch64</li>
<li>See full diff in <a
href="https://github.com/serde-rs/json/compare/v1.0.110...v1.0.111">compare
view</a></li>
</ul>
</details>
<br />

Updates `clap` from 4.4.12 to 4.4.13
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/releases">clap's
releases</a>.</em></p>
<blockquote>
<h2>v4.4.13</h2>
<h2>[4.4.13] - 2024-01-04</h2>
<h3>Documentation</h3>
<ul>
<li>Fix link to structopt migration guide</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.4.13] - 2024-01-04</h2>
<h3>Documentation</h3>
<ul>
<li>Fix link to structopt migration guide</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/2ab48b295c2463ce8c141a9868095b811ccf3b99"><code>2ab48b2</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/7a06a8cd619db704c6d826bf752eae3b86ce23a8"><code>7a06a8c</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/cca190efedf40f48147a3a4a777a9cc17728abdf"><code>cca190e</code></a>
docs: Correct link to StructOpt migration guide</li>
<li><a
href="https://github.com/clap-rs/clap/commit/5c31f453c1a9f46109db8e0a47ed212748c0556c"><code>5c31f45</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5281">#5281</a>
from Manishearth/safety-docs</li>
<li><a
href="https://github.com/clap-rs/clap/commit/ddae7e6f411c4c87294212152b8d9beea16637e7"><code>ddae7e6</code></a>
Correct safety docs</li>
<li><a
href="https://github.com/clap-rs/clap/commit/48d28aa689bfd0fb44ec025244b30ba261e2515a"><code>48d28aa</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/748ce18cc2ccc3f7c07fa8b7c5b6f90ed9242b72"><code>748ce18</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/adbe6ec4cb6a617070c41927a389d0bea7b30936"><code>adbe6ec</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5278">#5278</a>
from henry-hsieh/fix-nosort</li>
<li><a
href="https://github.com/clap-rs/clap/commit/2b48858ba84c62e9af97bee4734d70530254cd8a"><code>2b48858</code></a>
fix: Skip nosort option below bash 4.4</li>
<li><a
href="https://github.com/clap-rs/clap/commit/777b744102cde324dc75534ef043efc15a9f40be"><code>777b744</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5277">#5277</a>
from clap-rs/renovate/actions-setup-python-5.x</li>
<li>Additional commits viewable in <a
href="https://github.com/clap-rs/clap/compare/v4.4.12...v4.4.13">compare
view</a></li>
</ul>
</details>
<br />

Updates `syn` from 2.0.47 to 2.0.48
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/syn/releases">syn's
releases</a>.</em></p>
<blockquote>
<h2>2.0.48</h2>
<ul>
<li>Improve error message on unexpected token after <code>else</code>
(<a
href="https://redirect.github.com/dtolnay/syn/issues/1578">#1578</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/syn/commit/5e16fc24e68b16a381cb7ef22455dba9db143083"><code>5e16fc2</code></a>
Release 2.0.48</li>
<li><a
href="https://github.com/dtolnay/syn/commit/dc40084b15ab4a443179fc39cbadac6452408838"><code>dc40084</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1578">#1578</a>
from dtolnay/elseblock</li>
<li><a
href="https://github.com/dtolnay/syn/commit/82fcefce69d36e78301936c5af91f005d6a24357"><code>82fcefc</code></a>
Fix error message on unexpected token after 'else'</li>
<li><a
href="https://github.com/dtolnay/syn/commit/e8a5c68ad45194e575a923f6b1e08f1817196331"><code>e8a5c68</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1576">#1576</a>
from dtolnay/exhaustive</li>
<li><a
href="https://github.com/dtolnay/syn/commit/97b1df6d935cb4801f4090782304577c8574d024"><code>97b1df6</code></a>
Pick up changes to non_exhaustive_omitted_patterns lint</li>
<li>See full diff in <a
href="https://github.com/dtolnay/syn/compare/2.0.47...2.0.48">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Related to https://github.com/paritytech/polkadot-sdk/issues/2787

Adding BEEFY support to the kitchensink chain in order to be able to
extend the current warp sync zombienet tests with BEEFY enabled

Bumps the known_good_semver group with 4 updates:
[serde](https://github.com/serde-rs/serde),
[serde_json](https://github.com/serde-rs/json),
[clap](https://github.com/clap-rs/clap) and
[serde_yaml](https://github.com/dtolnay/serde-yaml).

Updates `serde` from 1.0.193 to 1.0.194
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/serde/releases">serde's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.194</h2>
<ul>
<li>Update proc-macro2 to fix caching issue when using a rustc-wrapper
such as sccache</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/serde/commit/d2d977a6c6dcff237ae956336d18b0c900c61aad"><code>d2d977a</code></a>
Release 1.0.194</li>
<li><a
href="https://github.com/serde-rs/serde/commit/a9a6ee9d7f2e3a3306ad7c7a8f21dcf369c6acb7"><code>a9a6ee9</code></a>
Pull in proc-macro2 sccache fix</li>
<li><a
href="https://github.com/serde-rs/serde/commit/28c5d215c11b66368b725f04cb92e49e4350bcdc"><code>28c5d21</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2669">#2669</a>
from dtolnay/optionifletelse</li>
<li><a
href="https://github.com/serde-rs/serde/commit/3d6a789562579fb7ea783e0d7f35530914d8baca"><code>3d6a789</code></a>
Remove option_if_let_else clippy suppression</li>
<li><a
href="https://github.com/serde-rs/serde/commit/a0e68698e33fa928f1d9f208d68b17df9f8bb568"><code>a0e6869</code></a>
Work around doc_link_with_quotes pedantic clippy lint</li>
<li>See full diff in <a
href="https://github.com/serde-rs/serde/compare/v1.0.193...v1.0.194">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_json` from 1.0.108 to 1.0.110
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/json/releases">serde_json's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.109</h2>
<ul>
<li>Documentation improvements</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/json/commit/df5cf215b70fb6341b255e7c0a210c06f64c0669"><code>df5cf21</code></a>
Release 1.0.110</li>
<li><a
href="https://github.com/serde-rs/json/commit/c35856a93c37b48b3d6efc4fec8e05554dd3f9d5"><code>c35856a</code></a>
Pull in proc-macro2 sccache fix</li>
<li><a
href="https://github.com/serde-rs/json/commit/f88bf1fccb05aa4de129675de44eb6aaf3fec0a0"><code>f88bf1f</code></a>
Release 1.0.109</li>
<li><a
href="https://github.com/serde-rs/json/commit/bb62c73ecef901e689b0a7a67ed613a32975520c"><code>bb62c73</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1097">#1097</a>
from serde-rs/doccfg</li>
<li><a
href="https://github.com/serde-rs/json/commit/df36d109fd9f9cdd22a874c0177cafec12237f95"><code>df36d10</code></a>
Restore doc cfg on re-exports</li>
<li><a
href="https://github.com/serde-rs/json/commit/c3670913423329c166add9d85ecdfc3e3da21e7a"><code>c367091</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1095">#1095</a>
from dtolnay/hashtest</li>
<li><a
href="https://github.com/serde-rs/json/commit/b328ee7df4dd772922f084600aa7cea39218b694"><code>b328ee7</code></a>
Eliminate hash closure in favor of calling hash_one directly</li>
<li><a
href="https://github.com/serde-rs/json/commit/b9bcbad3c094042f79f1a45189ec0edbb8f9f322"><code>b9bcbad</code></a>
Use BuildHasher::hash_one</li>
<li><a
href="https://github.com/serde-rs/json/commit/7ff6c9e30c2ecc2cdcf089ed86c7ccfe7a41721c"><code>7ff6c9e</code></a>
Use random hasher state for number hashing test</li>
<li><a
href="https://github.com/serde-rs/json/commit/fe031cd1de4dde5b47e0f18934632b41bd18b48d"><code>fe031cd</code></a>
Delete trace_macros! functionality from test</li>
<li>Additional commits viewable in <a
href="https://github.com/serde-rs/json/compare/v1.0.108...v1.0.110">compare
view</a></li>
</ul>
</details>
<br />

Updates `clap` from 4.4.11 to 4.4.12
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/releases">clap's
releases</a>.</em></p>
<blockquote>
<h2>v4.4.12</h2>
<h2>[4.4.12] - 2023-12-28</h2>
<h3>Performance</h3>
<ul>
<li>Only ask <code>TypedValueParser</code> for possible values if
needed</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.4.12] - 2023-12-28</h2>
<h3>Performance</h3>
<ul>
<li>Only ask <code>TypedValueParser</code> for possible values if
needed</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/6d601e6f312857d78f47741268f1748840484d4a"><code>6d601e6</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/048e7f0fbc4f8108894e4307af768c8d332a0576"><code>048e7f0</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/53f5b820988c1c03f0d2696fc144857ad461edc1"><code>53f5b82</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5267">#5267</a>
from vermiculus/sa/avoid-pv-expansion-in-help</li>
<li><a
href="https://github.com/clap-rs/clap/commit/05cd057978db743a65fb5fde33213af752d064e7"><code>05cd057</code></a>
perf: Avoid retrieving possible_values unless used</li>
<li><a
href="https://github.com/clap-rs/clap/commit/29208083b0598ba7d1b80e79821c0ba3eb2342ce"><code>2920808</code></a>
test: Update snapshots</li>
<li><a
href="https://github.com/clap-rs/clap/commit/28763ebb6d8714f6ca588bf477729040e0e760b0"><code>28763eb</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/ace7bb5b4570b030f7c2d0fa91e0afaaac1b0030"><code>ace7bb5</code></a>
docs(complete): Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/76beca4d4d42a817bbb578f23553c64ded2aea97"><code>76beca4</code></a>
docs(complete): Polish API reference for dynamic</li>
<li><a
href="https://github.com/clap-rs/clap/commit/3630e582d3ec59912b8e9369c38687695ddb1f43"><code>3630e58</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5273">#5273</a>
from epage/docsrs</li>
<li><a
href="https://github.com/clap-rs/clap/commit/3724b9e2e4c2a2e69337b6d809949b246d3fef39"><code>3724b9e</code></a>
docs: Include more content on docs.rs</li>
<li>See full diff in <a
href="https://github.com/clap-rs/clap/compare/v4.4.11...v4.4.12">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_yaml` from 0.9.29 to 0.9.30
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/serde-yaml/releases">serde_yaml's
releases</a>.</em></p>
<blockquote>
<h2>0.9.30</h2>
<ul>
<li>Update proc-macro2 to fix caching issue when using a rustc-wrapper
such as sccache</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/09ee25156f608f95150b27edd120bd5471db3c64"><code>09ee251</code></a>
Release 0.9.30</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/caea939ece85ab54ac41de0672d683905f1e406a"><code>caea939</code></a>
Pull in proc-macro2 sccache fix</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/d255918c141fd72d01f169bb5aa0152234981699"><code>d255918</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/serde-yaml/issues/403">#403</a>
from dtolnay/optionifletelse</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/8cfeedd766f83dab24d03b9fb11b72886a247425"><code>8cfeedd</code></a>
Remove option_if_let_else clippy suppression</li>
<li>See full diff in <a
href="https://github.com/dtolnay/serde-yaml/compare/0.9.29...0.9.30">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

And have proper benchmarks.

---------

Co-authored-by: eskimor <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: joe petrowski <[email protected]>

Rococo and Westend runtimes for the "People Chain". This chain contains
the Identity pallet with plans to migrate all related data from the
Relay Chain.

Changes `IdentityInfo` to:

- Remove `additional_fields`.
- Add `github` and `discord` as first class fields. From scraping chain
data, these were the only two additional fields used (for the Fellowship
and Ambassador Program, respectively).
- Rename `riot` to `matrix`.

Note: This will use the script in
https://github.com/paritytech/polkadot-sdk/pull/2025 to generate the
genesis state.

TODO:

- [x] https://github.com/paritytech/polkadot-sdk/pull/1814 and
integration of the Identity Migrator pallet for migration.
- [x] Tests: https://github.com/paritytech/polkadot-sdk/pull/2373

---------

Co-authored-by: Muharem <[email protected]>
Co-authored-by: Michal Kucharczyk <[email protected]>
Co-authored-by: Dónal Murray <[email protected]>
Co-authored-by: Richard Melkonian <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>

Also fixes: https://github.com/paritytech/polkadot-sdk/issues/1417

- [x] CoreIndex -> AssignmentProvider mapping will be able to change any
time.
- [x] Implement
- [x] Provide Migrations
- [x] Add and fix tests
- [x] Implement bulk assigner logic
- [x] bulk assigner tests
- [x] Port over current assigner to use bulk designer (+ share on-demand
with bulk): top-level assigner has core ranges: legacy, bulk
- [x] Adjust migrations to reflect new assigner structure
- [x] Move migration code to Assignment code directly and make it
recursive (make it possible to skip releases) -> follow up ticket.
- [x] Test migrations
- [x] Add migration PR to runtimes repo -> follow up ticket.
- [x] Wire up with actual UMP messages
- [x] Write PR docs

---------

Co-authored-by: eskimor <[email protected]>
Co-authored-by: Bradley Olson <[email protected]>
Co-authored-by: BradleyOlson64 <[email protected]>
Co-authored-by: Anton Vilhelm Ásgeirsson <[email protected]>
Co-authored-by: antonva <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Marcin S. <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: command-bot <>

Adds the `authorize_upgrade` -> `enact_authorized_upgrade` pattern to
`frame-system`. This will be useful for upgrading bridged chains that
are under the governance of Polkadot without passing entire runtime Wasm
blobs over a bridge.

Notes:

- Changed `enact_authorized_upgrade` to `apply_authorized_upgrade`.
Personal opinion, "apply" more accurately expresses what it's doing. Can
change back if outvoted.
- Remove `check_version` in favor of two extrinsics, so as to make
_checked_ the default.
- Left calls in `parachain-system` and marked as deprecated to prevent
breaking the API. They just call into the `frame-system` functions.
- Updated `frame-system` benchmarks to v2 syntax.

---------

Co-authored-by: command-bot <>

This PR adds [Rococo
People](https://github.com/paritytech/polkadot-sdk/pull/2281) <> [Rococo
Bulletin](https://github.com/zdave-parity/polkadot-bulletin-chain) to
the Rococo Bridge Hub code. There's a couple of things left to do here:
- [x] add remaining tests - it'd need some refactoring in the
`bridge-hub-test-utils` - will do in a separate PR;
- [x] actually run benchmarks for new messaging pallet (do we have bot
nowadays?).

The reason why I'm opening it before this ^^^ is ready, is that I'd like
to hear others opinion on how to deal with hacks with that bridge.
Initially I was assuming that Rococo Bulletin will be the 1:1 copy of
the Polkadot Bulletin (to avoid maintaining multiple
runtimes/releases/...), so you can see many `PolkadotBulletin` mentions
in this PR, even though we are going to bridge with the parallel chain
(`RococoBulletin`). That's because e.g. pallet names from
`construct_runtime` are affecting runtime storage keys and bridges are
using runtime storage proofs => it is important to use names that the
Bulletin chain expects.

But in the end, this hack won't work - we can't use Polkadot Bulletin
runtime to bridge with Rococo Bridge Hub, because Polkadot Bulletin
expects Polkadot Bridge hub to use `1002` parachain id and Rococo Bridge
Hub seats on the `1013`. This also affects storage keys using in
bridging, so I had to add the [`rococo`
feature](https://github.com/svyatonik/polkadot-bulletin-chain/blob/add-bridge-pallets/runtime/Cargo.toml#L198)
to the Bulletin chain. So now we can actually alter its runtime and
adapt it for Rococo.

So the question here is - what's better for us here
- to leave everything as is (seems hacky and non-trivial);
- change Bulletin chain runtime when `rococo` feature is used - e.g. use
proper names there (`WithPolkadotGrandpa` -> `WithRococoGrandpa`, ...)
- add another set of pallets to the Bulletin chain runtime to bridge
with Rococo and never use them in production. Similar to hack that we
had in Rococo/Wococo

cc @acatangiu @bkontur @serban300 

also cc @joepetrowski

 as the main "client" of this bridge

---

A couple words on how this bridge is different from the Rococo <>
Westend bridge:
- it is a bridge with a chain that uses GRANDPA finality, not the
parachain finality (hence the tests needs to be changed);
- it is a fee-free bridge. So
`AllowExplicitUnpaidExecutionFrom<Equals<SiblingPeople>>` + we are not
paying any rewards to relayers (apart from compensating transaction
costs).

---------

Signed-off-by: dependabot[bot] <[email protected]>
Signed-off-by: Andrei Sandu <[email protected]>
Co-authored-by: Adrian Catangiu <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Andrei Sandu <[email protected]>
Co-authored-by: Egor_P <[email protected]>
Co-authored-by: command-bot <>

In the move from the old `Currency` traits to the new `fungible/s`
family of traits, we already had the `FungiblesAdapter` and
`NonFungiblesAdapter` for multiple fungible and non fungible assets
respectively. However, for handling only one fungible asset, we were
missing a `FungibleAdapter`, and so used the old `CurrencyAdapter`
instead. This PR aims to fill in that gap, and provide the new adapter
for more updated examples.

I marked the old `CurrencyAdapter` as deprecated as part of this PR, and
I'll change it to the new `FungibleAdapter` in a following PR.
The two stages are separated so as to not bloat this PR with some name
fixes in tests.

---------

Co-authored-by: command-bot <>

This PR backports `transaction_version` bump from `1.5.0` release back
to `master`

We currently use a bit of a hack in `.cargo/config` to make sure that
clippy isn't too annoying by specifying the list of lints.

There is now a stable way to define lints for a workspace. The only down
side is that every crate seems to have to opt into this so there's a
*few* files modified in this PR.

Dependencies:

- [x] PR that upgrades CI to use rust 1.74 is merged.

---------

Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>

Initial implementation for the plan discussed here: https://github.com/paritytech/polkadot-sdk/issues/701
Built on top of https://github.com/paritytech/polkadot-sdk/pull/1178
v0: https://github.com/paritytech/polkadot/pull/7554,

## Overall idea

When approval-voting checks a candidate and is ready to advertise the
approval, defer it in a per-relay chain block until we either have
MAX_APPROVAL_COALESCE_COUNT candidates to sign or a candidate has stayed
MAX_APPROVALS_COALESCE_TICKS in the queue, in both cases we sign what
candidates we have available.

This should allow us to reduce the number of approvals messages we have
to create/send/verify. The parameters are configurable, so we should
find some values that balance:

- Security of the network: Delaying broadcasting of an approval
shouldn't but the finality at risk and to make sure that never happens
we won't delay sending a vote if we are past 2/3 from the no-show time.
- Scalability of the network: MAX_APPROVAL_COALESCE_COUNT = 1 &
MAX_APPROVALS_COALESCE_TICKS =0, is what we have now and we know from
the measurements we did on versi, it bottlenecks
approval-distribution/approval-voting when increase significantly the
number of validators and parachains
- Block storage: In case of disputes we have to import this votes on
chain and that increase the necessary storage with
MAX_APPROVAL_COALESCE_COUNT * CandidateHash per vote. Given that
disputes are not the normal way of the network functioning and we will
limit MAX_APPROVAL_COALESCE_COUNT in the single digits numbers, this
should be good enough. Alternatively, we could try to create a better
way to store this on-chain through indirection, if that's needed.

## Other fixes:
- Fixed the fact that we were sending random assignments to
non-validators, that was wrong because those won't do anything with it
and they won't gossip it either because they do not have a grid topology
set, so we would waste the random assignments.
- Added metrics to be able to debug potential no-shows and
mis-processing of approvals/assignments.

## TODO:
- [x] Get feedback, that this is moving in the right direction. @ordian
@sandreim @eskimor

 @burdges, let me know what you think.
- [x] More and more testing.
- [x]  Test in versi.
- [x] Make MAX_APPROVAL_COALESCE_COUNT &
MAX_APPROVAL_COALESCE_WAIT_MILLIS a parachain host configuration.
- [x] Make sure the backwards compatibility works correctly
- [x] Make sure this direction is compatible with other streams of work:
https://github.com/paritytech/polkadot-sdk/issues/635 &
https://github.com/paritytech/polkadot-sdk/issues/742
- [x] Final versi burn-in before merging

---------

Signed-off-by: Alexandru Gheorghe <[email protected]>