Commits · e89d0fca351de0712f104c55fe45ed124b5c6968 · parity / Mirrored projects / polkadot-sdk

Feb 20, 2024

Lift dependencies to the workspace (Part 2/x) (#3366) · e89d0fca

Oliver Tale-Yazdi authored Feb 20, 2024



Lifting some more dependencies to the workspace. Just using the
most-often updated ones for now.
It can be reproduced locally.

```sh
# First you can check if there would be semver incompatible bumps (looks good in this case):
$ zepter transpose dependency lift-to-workspace --ignore-errors syn quote thiserror "regex:^serde.*"

# Then apply the changes:
$ zepter transpose dependency lift-to-workspace --version-resolver=highest syn quote thiserror "regex:^serde.*" --fix

# And format the changes:
$ taplo format --config .config/taplo.toml
```

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

e89d0fca

Feb 19, 2024

Add Coretime to Westend (#3319) · 320863a8

Anton Vilhelm Ásgeirsson authored Feb 19, 2024



Adds the coretime and on demand pallets to enable Coretime on Westend. 
In order for the migration to run successfully, we need the
Broker/Coretime parachain to be live.

TODO:
- [ ] Broker parachain is live
https://github.com/paritytech/polkadot-sdk/pull/3272

---------

Co-authored-by: command-bot <>
Co-authored-by: Bastian Köcher <[email protected]>

320863a8

`im-online` removal cleanup: remove off-chain storage (#2290) · a5492dc6

s0me0ne-unkn0wn authored Feb 19, 2024



This is a follow-up for `im-online` pallet removal that is cleaning up
its off-chain storage. Must be merged no earlier than #2265 is enacted.
Related: #1964

---------

Co-authored-by: Bastian Köcher <[email protected]>

a5492dc6

Feb 18, 2024
- Remove unused `im-online` weights (#3373) · 6185b002
  s0me0ne-unkn0wn authored Feb 18, 2024
```
A follow-up of #2265. Removes weights no longer needed.
```
  6185b002
Feb 16, 2024

Bump the known_good_semver group with 6 updates (#3347) · 4b484e6a

dependabot[bot] authored Feb 16, 2024



Bumps the known_good_semver group with 6 updates:

| Package | From | To |
| --- | --- | --- |
| [serde](https://github.com/serde-rs/serde) | `1.0.195` | `1.0.196` |
| [serde_json](https://github.com/serde-rs/json) | `1.0.111` | `1.0.113`
|
| [clap](https://github.com/clap-rs/clap) | `4.4.18` | `4.5.0` |
| [syn](https://github.com/dtolnay/syn) | `2.0.48` | `2.0.49` |
| [serde_yaml](https://github.com/dtolnay/serde-yaml) | `0.9.30` |
`0.9.31` |
| [serde_derive](https://github.com/serde-rs/serde) | `1.0.195` |
`1.0.196` |

Updates `serde` from 1.0.195 to 1.0.196
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/serde/releases">serde's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.196</h2>
<ul>
<li>Improve formatting of &quot;invalid type&quot; error messages
involving floats (<a
href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/serde/commit/ede9762a583c3cc3b87c10a53551828fad339525"><code>ede9762</code></a>
Release 1.0.196</li>
<li><a
href="https://github.com/serde-rs/serde/commit/d438c2d67bf30e3edab31c2272c4829c12cf4cb5"><code>d438c2d</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>
from dtolnay/decimalpoint</li>
<li><a
href="https://github.com/serde-rs/serde/commit/bef110b92a171ac568a47339f5bd97938a8c9da2"><code>bef110b</code></a>
Format Unexpected::Float with decimal point</li>
<li><a
href="https://github.com/serde-rs/serde/commit/b971ef11d1b53da7673e0c8199e87509c003c1a8"><code>b971ef1</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2681">#2681</a>
from dtolnay/workspacedeps</li>
<li><a
href="https://github.com/serde-rs/serde/commit/29d9f693996d199748136d5561a971ed68626724"><code>29d9f69</code></a>
Fix workspace.dependencies default-features future compat warning</li>
<li><a
href="https://github.com/serde-rs/serde/commit/aecb4083bde754155752f5d7d442b64eb7dc636f"><code>aecb408</code></a>
Sort workspace dependencies</li>
<li><a
href="https://github.com/serde-rs/serde/commit/1c675ab3a38e46df4e62465800970f8b20a2055d"><code>1c675ab</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2678">#2678</a>
from rodoufu/workspaceDependencies</li>
<li><a
href="https://github.com/serde-rs/serde/commit/dd619630a337139424725697ccd9a9f7596a2d3a"><code>dd61963</code></a>
Adding workspace dependencies</li>
<li><a
href="https://github.com/serde-rs/serde/commit/111803ab0768d010c606f2fc0d0add12750d5eef"><code>111803a</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2673">#2673</a>
from Sky9x/msrv-badge</li>
<li><a
href="https://github.com/serde-rs/serde/commit/0024f74f34fbbdc44a7b22457faebe36c5cbe7f8"><code>0024f74</code></a>
Use shields.io's MSRV badges</li>
<li>See full diff in <a
href="https://github.com/serde-rs/serde/compare/v1.0.195...v1.0.196">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_json` from 1.0.111 to 1.0.113
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/json/releases">serde_json's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.113</h2>
<ul>
<li>Add <code>swap_remove</code> and <code>shift_remove</code> methods
on Map (<a
href="https://redirect.github.com/serde-rs/json/issues/1109">#1109</a>)</li>
</ul>
<h2>v1.0.112</h2>
<ul>
<li>Improve formatting of &quot;invalid type&quot; error messages
involving floats (<a
href="https://redirect.github.com/serde-rs/json/issues/1107">#1107</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/json/commit/09d865b34b9701be52764dc9bf571b1a16e9d3dc"><code>09d865b</code></a>
Release 1.0.113</li>
<li><a
href="https://github.com/serde-rs/json/commit/5aeab4eaf69d7959f013f8081865c264d6c00551"><code>5aeab4e</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1109">#1109</a>
from serde-rs/remove</li>
<li><a
href="https://github.com/serde-rs/json/commit/ca3c2ca3696cab79b8b279be7569ee1647250f1e"><code>ca3c2ca</code></a>
Add swap_remove and shift_remove methods on Map</li>
<li><a
href="https://github.com/serde-rs/json/commit/7fece969e3b480ec620419d65c2aeb08776bebcb"><code>7fece96</code></a>
Release 1.0.112</li>
<li><a
href="https://github.com/serde-rs/json/commit/6a6d2bbd9e8b8bd72573b863f12a4ec991f33232"><code>6a6d2bb</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1107">#1107</a>
from serde-rs/unexpectedfloat</li>
<li><a
href="https://github.com/serde-rs/json/commit/83d7bad54ba5db3a44198d6df0ff2e81621683fa"><code>83d7bad</code></a>
Format f64 in error messages using ryu</li>
<li><a
href="https://github.com/serde-rs/json/commit/107c2d1c42817f0d71f07a4d5b0ea2f29dbce8b8"><code>107c2d1</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1106">#1106</a>
from serde-rs/invalidvalue</li>
<li><a
href="https://github.com/serde-rs/json/commit/62ca3e4c01c2e62cd5c2a32e9104f386e5ce7808"><code>62ca3e4</code></a>
Handle Unexpected::Unit in Error::invalid_value</li>
<li><a
href="https://github.com/serde-rs/json/commit/296fafb8f32e8442ef8e4d5725c15ffca726b288"><code>296fafb</code></a>
Factor out JSON-specific Display impl for serde::de::Unexpected</li>
<li><a
href="https://github.com/serde-rs/json/commit/e56cc696bd7c112e5dd4ccfa23d094c3a1c1c1ff"><code>e56cc69</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1105">#1105</a>
from keienWang/master</li>
<li>Additional commits viewable in <a
href="https://github.com/serde-rs/json/compare/v1.0.111...v1.0.113">compare
view</a></li>
</ul>
</details>
<br />

Updates `clap` from 4.4.18 to 4.5.0
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.5.0] - 2024-02-08</h2>
<h3>Compatibility</h3>
<ul>
<li>Update MSRV to 1.74</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/a751c5fe65cd33cb09e85ff3039b4fd0182cdb6e"><code>a751c5f</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/9ec6c942b81c370a8c14652e42295933244555ac"><code>9ec6c94</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/0735119775c2d27fef6b3c232cb9ef2fcbbd963f"><code>0735119</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/c4d3959506f5068f86ffb7ab34b622bd2da40dd8"><code>c4d3959</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5344">#5344</a>
from epage/encode</li>
<li><a
href="https://github.com/clap-rs/clap/commit/f750e577789e1dd34c6950d8c8fe16d1bfd1f49c"><code>f750e57</code></a>
fix(lex): Use new-ish OsStr API</li>
<li><a
href="https://github.com/clap-rs/clap/commit/1d9a554cdfddffcb92d197706b9720e2760cb443"><code>1d9a554</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5343">#5343</a>
from epage/msrv</li>
<li><a
href="https://github.com/clap-rs/clap/commit/4b45d361b1b96eb1f37b7d1db2684203ca828a94"><code>4b45d36</code></a>
chore: Update MSRV to 1.74</li>
<li><a
href="https://github.com/clap-rs/clap/commit/55b1f945157d4d0e480dea6c492e04d0b541088a"><code>55b1f94</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5342">#5342</a>
from epage/divan</li>
<li><a
href="https://github.com/clap-rs/clap/commit/ea77b98da3f321069ae136a241a2d266c2b28bd7"><code>ea77b98</code></a>
test(complete): Make it order independent</li>
<li><a
href="https://github.com/clap-rs/clap/commit/b0fea2bac60819bdb042e10c032817fded67f815"><code>b0fea2b</code></a>
test(bench): Switch to divan</li>
<li>Additional commits viewable in <a
href="https://github.com/clap-rs/clap/compare/v4.4.18...clap_complete-v4.5.0">compare
view</a></li>
</ul>
</details>
<br />

Updates `syn` from 2.0.48 to 2.0.49
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/syn/releases">syn's
releases</a>.</em></p>
<blockquote>
<h2>2.0.49</h2>
<ul>
<li>Improve error location when parsing from an empty string literal
using <code>LitStr::parse</code> (<a
href="https://redirect.github.com/dtolnay/syn/issues/1590">#1590</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/syn/commit/e64c0636042bcd8cf56f9e6c3e828a49cb434649"><code>e64c063</code></a>
Release 2.0.49</li>
<li><a
href="https://github.com/dtolnay/syn/commit/981359c5f46f25f3db42d1b341cc607f634688e7"><code>981359c</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1590">#1590</a>
from dtolnay/streof</li>
<li><a
href="https://github.com/dtolnay/syn/commit/51298d40a447b9e5b3cd8c898c2ea9d24b31cd6d"><code>51298d4</code></a>
Improve error location at eof in LitStr::parse</li>
<li><a
href="https://github.com/dtolnay/syn/commit/270c63384a9d891f65880a03a5a92f0bf4605bbf"><code>270c633</code></a>
Update test suite to nightly-2024-02-13</li>
<li><a
href="https://github.com/dtolnay/syn/commit/dc9cf16b9b0601d2d393d059c46a8f8e0220cc21"><code>dc9cf16</code></a>
Remove FilterAttrs trait when unused</li>
<li><a
href="https://github.com/dtolnay/syn/commit/7dcfac79eda716fa806d68cc0aa811f3be717dc0"><code>7dcfac7</code></a>
Ignore dead_code warning in test</li>
<li><a
href="https://github.com/dtolnay/syn/commit/98318441089f9a9bb596fc010ed14c3b593d4bda"><code>9831844</code></a>
Update signature of Emitter::emit_diagnostic in nightly-2024-02-07</li>
<li><a
href="https://github.com/dtolnay/syn/commit/9e8033f63da93dfb6a3e698449c6edff5e56727d"><code>9e8033f</code></a>
Update test suite to nightly-2024-02-07</li>
<li><a
href="https://github.com/dtolnay/syn/commit/cb3348cd94be50995054796facdfa055b6e0e9e8"><code>cb3348c</code></a>
Update test suite to nightly-2024-01-23</li>
<li><a
href="https://github.com/dtolnay/syn/commit/15b9dbcd67bc56f3da7d33bbede46f7380fc7164"><code>15b9dbc</code></a>
Update test suite to nightly-2024-01-19</li>
<li>Additional commits viewable in <a
href="https://github.com/dtolnay/syn/compare/2.0.48...2.0.49">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_yaml` from 0.9.30 to 0.9.31
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/serde-yaml/releases">serde_yaml's
releases</a>.</em></p>
<blockquote>
<h2>0.9.31</h2>
<ul>
<li>Add <code>swap_remove</code> and <code>shift_remove</code> methods
on Mapping (<a
href="https://redirect.github.com/dtolnay/serde-yaml/issues/408">#408</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/2a77483b23897115bdd69af32ae34d593268d555"><code>2a77483</code></a>
Release 0.9.31</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/d8d1a839cf42ef4627c66bebd743f5fecd24e3ed"><code>d8d1a83</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/serde-yaml/issues/408">#408</a>
from dtolnay/remove</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/f8a99a496836ccfa6c547af9136986d13011be98"><code>f8a99a4</code></a>
Add swap_remove and shift_remove methods on Mapping</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/8b26413e3307e39329dc68a96b065058aec38f9a"><code>8b26413</code></a>
Work around dead_code warning in tests</li>
<li>See full diff in <a
href="https://github.com/dtolnay/serde-yaml/compare/0.9.30...0.9.31">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_derive` from 1.0.195 to 1.0.196
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/serde/releases">serde_derive's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.196</h2>
<ul>
<li>Improve formatting of &quot;invalid type&quot; error messages
involving floats (<a
href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/serde/commit/ede9762a583c3cc3b87c10a53551828fad339525"><code>ede9762</code></a>
Release 1.0.196</li>
<li><a
href="https://github.com/serde-rs/serde/commit/d438c2d67bf30e3edab31c2272c4829c12cf4cb5"><code>d438c2d</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>
from dtolnay/decimalpoint</li>
<li><a
href="https://github.com/serde-rs/serde/commit/bef110b92a171ac568a47339f5bd97938a8c9da2"><code>bef110b</code></a>
Format Unexpected::Float with decimal point</li>
<li><a
href="https://github.com/serde-rs/serde/commit/b971ef11d1b53da7673e0c8199e87509c003c1a8"><code>b971ef1</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2681">#2681</a>
from dtolnay/workspacedeps</li>
<li><a
href="https://github.com/serde-rs/serde/commit/29d9f693996d199748136d5561a971ed68626724"><code>29d9f69</code></a>
Fix workspace.dependencies default-features future compat warning</li>
<li><a
href="https://github.com/serde-rs/serde/commit/aecb4083bde754155752f5d7d442b64eb7dc636f"><code>aecb408</code></a>
Sort workspace dependencies</li>
<li><a
href="https://github.com/serde-rs/serde/commit/1c675ab3a38e46df4e62465800970f8b20a2055d"><code>1c675ab</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2678">#2678</a>
from rodoufu/workspaceDependencies</li>
<li><a
href="https://github.com/serde-rs/serde/commit/dd619630a337139424725697ccd9a9f7596a2d3a"><code>dd61963</code></a>
Adding workspace dependencies</li>
<li><a
href="https://github.com/serde-rs/serde/commit/111803ab0768d010c606f2fc0d0add12750d5eef"><code>111803a</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2673">#2673</a>
from Sky9x/msrv-badge</li>
<li><a
href="https://github.com/serde-rs/serde/commit/0024f74f34fbbdc44a7b22457faebe36c5cbe7f8"><code>0024f74</code></a>
Use shields.io's MSRV badges</li>
<li>See full diff in <a
href="https://github.com/serde-rs/serde/compare/v1.0.195...v1.0.196">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

4b484e6a

Add retry mechanics to `pallet-scheduler` (#3060) · 9346019d

georgepisaltu authored Feb 16, 2024



Fixes #3014 

This PR adds retry mechanics to `pallet-scheduler`, as described in the
issue above.

Users can now set a retry configuration for a task so that, in case its
scheduled run fails, it will be retried after a number of blocks, for a
specified number of times or until it succeeds.

If a retried task runs successfully before running out of retries, its
remaining retry counter will be reset to the initial value. If a retried
task runs out of retries, it will be removed from the schedule.

Tasks which need to be scheduled for a retry are still subject to weight
metering and agenda space, same as a regular task. Periodic tasks will
have their periodic schedule put on hold while the task is retrying.

---------

Signed-off-by: georgepisaltu <[email protected]>
Co-authored-by: command-bot <>

9346019d

Feb 15, 2024

Implements a % cap on staking rewards from era inflation (#1660) · fde44474

Gonçalo Pestana authored Feb 15, 2024

This PR implements an (optional) cap of the era inflation that is
allocated to staking rewards. The remaining is minted directly into the
[`RewardRemainder`](https://github.com/paritytech/polkadot-sdk/blob/fb0fd3e6/substrate/frame/staking/src/pallet/mod.rs#L160)
account, which is the treasury pot account in Polkadot and Kusama.

The staking pallet now has a percent storage item, `MaxStakersRewards`,
which defines the max percentage of the era inflation that should be
allocated to staking rewards. The remaining era inflation (i.e.
`remaining = max_era_payout - staking_payout.min(staking_payout *
MaxStakersRewards))` is minted directly into the treasury.

The `MaxStakersRewards` can be set by a privileged origin through the
`set_staking_configs` extrinsic.

**To finish**
- [x] run benchmarks for westend-runtime

Replaces https://github.com/paritytech/polkadot-sdk/pull/1483
Closes https://github.com/paritytech/polkadot-sdk/issues/403

---------

Co-authored-by: command-bot <>

fde44474

Feb 14, 2024

Validate code when scheduling uprades from registrar (#3232) · 7e7c488b

Sergej Sakac authored Feb 14, 2024

Currently, anyone can registrar a code that exceeds the code size limit
when performing the upgrade from the registrar. This PR fixes that and
adds a new test to cover this.

cc @bkchr @eskimor

7e7c488b

Feb 13, 2024

[xcm-builder] Replaced deprecated CurrencyAdapter with FungibleAdapter (#3287) · e0c902e3

Branislav Kontur authored Feb 13, 2024



I found out during the cleanup of this deprecation message in the
`polkadot-fellows` repository that we deprecated `CurrencyAdapter`
without making the recommended changes.


## TODO
- [ ] fix `polkadot-fellows` bump to 1.6.0
https://github.com/polkadot-fellows/runtimes/pull/159

---------

Co-authored-by: Francisco Aguirre <[email protected]>

e0c902e3

Feb 12, 2024

Lift dependencies to the workspace (Part 1) (#2070) · e80c2473

Oliver Tale-Yazdi authored Feb 12, 2024

Changes (partial https://github.com/paritytech/polkadot-sdk/issues/994):
- Set log to `0.4.20` everywhere
- Lift `log` to the workspace

Starting with a simpler one after seeing
https://github.com/paritytech/polkadot-sdk/pull/2065 from @jsdw

.
This sets the `default-features` to `false` in the root and then
overwrites that in each create to its original value. This is necessary
since otherwise the `default` features are additive and its impossible
to disable them in the crate again once they are enabled in the
workspace.

I am using a tool to do this, so its mostly a test to see that it works
as expected.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

e80c2473

Feb 09, 2024

[Backport] Version bumps from 1.7.0 release (#3254) · b2c81b58

Egor_P authored Feb 09, 2024

This PR backports version bumps from `1.7.0` release branch and moves
related prdoc files to the appropriate folder.

b2c81b58

Feb 08, 2024

Fixes `TotalValueLocked` out of sync in nomination pools (#3052) · aac07af0

Gonçalo Pestana authored Feb 08, 2024

The `TotalLockedValue` storage value in nomination pools pallet may get
out of sync if the staking pallet does implicit withdrawal of unlocking
chunks belonging to a bonded pool stash. This fix is based on a new
method in the `OnStakingUpdate` traits, `on_withdraw`, which allows the
nomination pools pallet to adjust the `TotalLockedValue` every time
there is an implicit or explicit withdrawal from a bonded pool's stash.

This PR also adds a migration that checks and updates the on-chain TVL
if it got out of sync due to the bug this PR fixes.

**Changes to `trait OnStakingUpdate`**

In order for staking to notify the nomination pools pallet that chunks
where withdrew, we add a new method, `on_withdraw` to the
`OnStakingUpdate` trait. The nomination pools pallet filters the
withdraws that are related to bonded pool accounts and updates the
`TotalValueLocked` accordingly.

**Others**
- Adds try-state checks to the EPM/staking e2e tests
- Adds tests for auto withdrawing in the context of nomination pools

**To-do**
- [x] check if we need a migration to fix the current `TotalValueLocked`
(run try-runtime)
- [x] migrations to fix the current on-chain TVL value 

 ✅ **Kusama**:
```
TotalValueLocked: 99.4559 kKSM
TotalValueLocked (calculated) 99.4559 kKSM
```
⚠

️ **Westend**:
```
TotalValueLocked: 18.4060 kWND
TotalValueLocked (calculated) 18.4050 kWND
```
**Polkadot**: TVL not released yet.

Closes https://github.com/paritytech/polkadot-sdk/issues/3055

---------

Co-authored-by: command-bot <>
Co-authored-by: Ross Bulat <[email protected]>
Co-authored-by: Dónal Murray <[email protected]>

aac07af0

Feb 06, 2024

[pallet_xcm] Forgotten migration to XCMv4 + added `try-state` to the `pallet_xcm` (#3228) · 8c1c99f0
Branislav Kontur authored Feb 06, 2024
```
Relates to: https://github.com/paritytech/polkadot-sdk/issues/3214

## TODO

- [ ] backport to the `1.7.0` release
```
8c1c99f0

Ranked collective `Add`+`Remove` origins (#3212) · c552fb54

Oliver Tale-Yazdi authored Feb 06, 2024



Superseeds https://github.com/paritytech/polkadot-sdk/pull/1245  

This PR is a migration of the
https://github.com/paritytech/substrate/pull/14577.

The PR added associated types (`AddOrigin` & `RemoveOrigin`) to
`Config`. It allows you to decouple types and areas of responsibility,
since at the moment the same types are responsible for adding and
promoting(removing and demoting). This will improve the flexibility of
the pallet configuration.

```
/// The origin required to add a member.
type AddOrigin: EnsureOrigin<Self::RuntimeOrigin, Success = ()>;

/// The origin required to remove a member. The success value indicates the
/// maximum rank *from which* the removal may be.
type RemoveOrigin: EnsureOrigin<Self::RuntimeOrigin, Success = Rank>;
```
To achieve the backward compatibility, the users of the pallet can use
the old type via the new morph:

```
type AddOrigin = MapSuccess<Self::PromoteOrigin, Ignore>;
type RemoveOrigin = Self::DemoteOrigin;
```

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: PraetorP <[email protected]>
Co-authored-by: Pavel Orlov <[email protected]>

c552fb54

Feb 02, 2024

Small fixes coretime related fixes (#3188) · 4d78c6eb

Tsvetomir Dimitrov authored Feb 02, 2024

The PR contains small fixes for:
* A test `HostConfig v11` storage migration - v11 was compared with
itself instead of with `v10`.
* Outdated comment for `ClaimQueue`
* Typos

4d78c6eb

Fixup backing group computation time (#3170) · 5ba89217

Alexandru Gheorghe authored Feb 02, 2024



Fixes: https://github.com/paritytech/polkadot-sdk/issues/3165

---------

Signed-off-by: Alexandru Gheorghe <[email protected]>

5ba89217

Jan 31, 2024

[FRAME] Make `core-fellowship` ans `salary` work for swapped members (#3156) · 07e55006

Oliver Tale-Yazdi authored Jan 31, 2024

Fixup for https://github.com/paritytech/polkadot-sdk/pull/2587 to make
the `core-fellowship` crate work with swapped members.

Adds a `MemberSwappedHandler` to the `ranked-collective` pallet that are
implemented by `core-fellowship+salary`.
There is are exhaustive tests
[here](https://github.com/paritytech/polkadot-sdk/blob/72aa7ac1/substrate/frame/core-fellowship/src/tests/integration.rs#L338)
and
[here](https://github.com/paritytech/polkadot-sdk/blob/ab3cdb05

/substrate/frame/salary/src/tests/integration.rs#L224)
to check that adding member `1` is equivalent to adding member `0` and
then swapping.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

07e55006

[frame] `#[pallet::composite_enum]` improved variant count handling + removed... · bb8ddc46

Branislav Kontur authored Jan 31, 2024

[frame] `#[pallet::composite_enum]` improved variant count handling + removed `pallet_balances`'s `MaxHolds` config (#2657)

I started this investigation/issue based on @liamaharon

 question
[here](https://github.com/paritytech/polkadot-sdk/pull/1801#discussion_r1410452499).

## Problem

The `pallet_balances` integrity test should correctly detect that the
runtime has correct distinct `HoldReasons` variant count. I assume the
same situation exists for RuntimeFreezeReason.

It is not a critical problem, if we set `MaxHolds` with a sufficiently
large value, everything should be ok. However, in this case, the
integrity_test check becomes less useful.

**Situation for "any" runtime:**
- `HoldReason` enums from different pallets:
```rust
        /// from pallet_nis
        #[pallet::composite_enum]
	pub enum HoldReason {
		NftReceipt,
	}

        /// from pallet_preimage
        #[pallet::composite_enum]
	pub enum HoldReason {
		Preimage,
	}

        // from pallet_state-trie-migration
        #[pallet::composite_enum]
	pub enum HoldReason {
		SlashForContinueMigrate,
		SlashForMigrateCustomTop,
		SlashForMigrateCustomChild,
	}
```

- generated `RuntimeHoldReason` enum looks like:
```rust
pub enum RuntimeHoldReason {

    #[codec(index = 32u8)]
    Preimage(pallet_preimage::HoldReason),

    #[codec(index = 38u8)]
    Nis(pallet_nis::HoldReason),

    #[codec(index = 42u8)]
    StateTrieMigration(pallet_state_trie_migration::HoldReason),
}
```

- composite enum `RuntimeHoldReason` variant count is detected as `3`
- we set `type MaxHolds = ConstU32<3>`
- `pallet_balances::integrity_test` is ok with `3`(at least 3)

However, the real problem can occur in a live runtime where some
functionality might stop working. This is due to a total of 5 distinct
hold reasons (for pallets with multi-instance support, it is even more),
and not all of them can be used because of an incorrect `MaxHolds`,
which is deemed acceptable according to the `integrity_test`:
  ```
  // pseudo-code - if we try to call all of these:

T::Currency::hold(&pallet_nis::HoldReason::NftReceipt.into(),
&nft_owner, deposit)?;
T::Currency::hold(&pallet_preimage::HoldReason::Preimage.into(),
&nft_owner, deposit)?;

T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForContinueMigrate.into(),
&nft_owner, deposit)?;

  // With `type MaxHolds = ConstU32<3>` these two will fail

T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomTop.into(),
&nft_owner, deposit)?;

T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomChild.into(),
&nft_owner, deposit)?;
  ```  


## Solutions

A macro `#[pallet::*]` expansion is extended of `VariantCount`
implementation for the `#[pallet::composite_enum]` enum type. This
expansion generates the `VariantCount` implementation for pallets'
`HoldReason`, `FreezeReason`, `LockId`, and `SlashReason`. Enum variants
must be plain enum values without fields to ensure a deterministic
count.

The composite runtime enum, `RuntimeHoldReason` and
`RuntimeFreezeReason`, now sets `VariantCount::VARIANT_COUNT` as the sum
of pallets' enum `VariantCount::VARIANT_COUNT`:
```rust
#[frame_support::pallet(dev_mode)]
mod module_single_instance {

	#[pallet::composite_enum]
	pub enum HoldReason {
		ModuleSingleInstanceReason1,
		ModuleSingleInstanceReason2,
	}
...
}

#[frame_support::pallet(dev_mode)]
mod module_multi_instance {

	#[pallet::composite_enum]
	pub enum HoldReason<I: 'static = ()> {
		ModuleMultiInstanceReason1,
		ModuleMultiInstanceReason2,
		ModuleMultiInstanceReason3,
	}
...
}


impl self::sp_api_hidden_includes_construct_runtime::hidden_include::traits::VariantCount
    for RuntimeHoldReason
{
    const VARIANT_COUNT: u32 = 0
        + module_single_instance::HoldReason::VARIANT_COUNT
        + module_multi_instance::HoldReason::<module_multi_instance::Instance1>::VARIANT_COUNT
        + module_multi_instance::HoldReason::<module_multi_instance::Instance2>::VARIANT_COUNT
        + module_multi_instance::HoldReason::<module_multi_instance::Instance3>::VARIANT_COUNT;
}
```

In addition, `MaxHolds` is removed (as suggested
[here](https://github.com/paritytech/polkadot-sdk/pull/2657#discussion_r1443324573))
from `pallet_balances`, and its `Holds` are now bounded to
`RuntimeHoldReason::VARIANT_COUNT`. Therefore, there is no need to let
the runtime specify `MaxHolds`.


## For reviewers

Relevant changes can be found here:
- `substrate/frame/support/procedural/src/lib.rs` 
-  `substrate/frame/support/procedural/src/pallet/parse/composite.rs`
-  `substrate/frame/support/procedural/src/pallet/expand/composite.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/composite_helper.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/hold_reason.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/freeze_reason.rs`
- `substrate/frame/support/src/traits/misc.rs`

And the rest of the files is just about removed `MaxHolds` from
`pallet_balances`

## Next steps

Do the same for `MaxFreezes`
https://github.com/paritytech/polkadot-sdk/issues/2997.

---------

Co-authored-by: command-bot <>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Dónal Murray <[email protected]>
Co-authored-by: gupnik <[email protected]>

bb8ddc46

Jan 30, 2024

[FRAME] Introduce `force_adjust_total_issuance` (#3001) · 5a6f6d33

Oliver Tale-Yazdi authored Jan 30, 2024



Add `Balances::force_adjust_total_issuance` as preparation for fixing
https://github.com/polkadot-fellows/runtimes/issues/147.
Important changes in `substrate/frame/balances/src/lib.rs`.

TODO:
- [x] Update weights

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Bastian Köcher <[email protected]>

5a6f6d33

exchange member with a new account and same rank in the ranked collec… (#2587) · 5eb4773d

dharjeezy authored Jan 30, 2024



closes https://github.com/polkadot-fellows/help-center/issues/1

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

5eb4773d

revert paritytech/polkadot#6577 & related changes (#3108) · e5bb11b0

Robert Hambrock authored Jan 30, 2024



Moves `pallet_mmr` back behind `pallet_session` to address
polkadot-fellows/runtimes#160.

Opening draft for CI - should be merged or closed depending on outcome
of w3f/polkadot-spec#718.

---------

Co-authored-by: Adrian Catangiu <[email protected]>

e5bb11b0

Jan 26, 2024

Sync Cargo.toml and crates.io versions (#3034) · 3717ec38

Liam Aharon authored Jan 27, 2024



Related https://github.com/paritytech/polkadot-sdk/issues/3032

---

Using https://github.com/liamaharon/cargo-workspace-version-tools/ 

`cargo run -- sync --path ../polkadot-sdk`

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

3717ec38

Jan 24, 2024

Transactional processing for XCM (#1222) · 50eb12cf

Just van Stam authored Jan 24, 2024



Moved from: https://github.com/paritytech/polkadot/pull/6951

closes https://github.com/paritytech/polkadot-sdk/issues/490

- [x] update cumulus

--- 
This PR introduces transactional processing of certain xcm instructions.
For the list of instructions checkout
https://github.com/paritytech/polkadot-sdk/issues/490. The transactional
processing is implemented as an xcm-executor config item. The two
implementations in this PR are `FrameTransactionalProcessor` and `()`.
The `()` implementation does no transactional processing. Each
implementation of the `ProcessTransaction` trait has an
`IS_TRANSACTIONAL` const that tells the XCVM if transactional processing
is actually implemented. If Transactional processing is implemented,
changes to touched registers should also be rolled back to prevent
inconsistencies.


Note for reviewers:
Check out the following safety assumption:
https://github.com/paritytech/polkadot-sdk/pull/1222/files#diff-4effad7d8c1c9de19fd27e18661cbf2128c8718f3b2420a27d2f816e0749ea53R30

---------

Co-authored-by: Keith Yeung <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: command-bot <>

50eb12cf

Refactor `pallet-state-trie-migration` to `fungible::*` traits (#1801) · 4374b5d5

Branislav Kontur authored Jan 24, 2024



## Summary

This PR consolidates `pallet-state-trie-migration` as a part of
https://github.com/paritytech/polkadot-sdk/issues/226 /
https://github.com/paritytech/polkadot-sdk/issues/171:

`pallet-state-trie-migration`:
- [x] replace `Currency` with `fungible` traits
- [x] run benchmarks
- [x] refactor to `DefaultConfig`

`pallet_nicks`:
- [x]  remove

others:
- [x] remove `as Fn*` or `asFun*` stuff based on discussion
[here](https://github.com/paritytech/polkadot-sdk/issues/226#issuecomment-1822861445)

---------

Co-authored-by: Richard Melkonian <[email protected]>
Co-authored-by: command-bot <>

4374b5d5

Registrar: Deposit covering max code size (#3020) · 488cbe68

Sergej Sakac authored Jan 24, 2024



This PR implements phase 1 of:
https://github.com/paritytech/polkadot-sdk/pull/2372#discussion_r1461873933

NOTE: This means that all the current parachains can upgrade their code
to the maximum size for free.

---------

Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Radha <[email protected]>

488cbe68

Jan 23, 2024

Various nits and alignments for testnet runtimes (#3024) · a817d310

Branislav Kontur authored Jan 23, 2024

There were several improvements and PRs that didn't apply to all
runtimes, so this PR attempts to align those small differences. In
addition, the PR eliminates unused dependencies across multiple modules.

Relates to PR for `polkadot-fellows`:
https://github.com/polkadot-fellows/runtimes/pull/154

a817d310

Update Westend / People Runtimes for Post-Migration (#3026) · 8eeacff4
joe petrowski authored Jan 23, 2024

8eeacff4

Jan 22, 2024

Move cryptographic hashing procedures to crypto folder. (#2306) · 4c10fd2a

Davide Galassi authored Jan 23, 2024



Step towards https://github.com/paritytech/polkadot-sdk/issues/1975

As reported
https://github.com/paritytech/polkadot-sdk/issues/1975#issuecomment-1774534225
I'd like to encapsulate crypto related stuff in a dedicated folder.

Currently all cryptographic primitive wrappers are all sparsed in
`substrate/core` which contains "misc core" stuff.

To simplify the process, as the first step with this PR I propose to
move the cryptographic hashing there.

The `substrate/crypto` folder was already created to contains `ec-utils`
crate.

Notes:
- rename `sp-core-hashing` to `sp-crypto-hashing`
- rename `sp-core-hashing-proc-macro` to `sp-crypto-hashing-proc-macro`
- As the crates name is changed I took the freedom to restart fresh from
version 0.1.0 for both crates

---------

Co-authored-by: Robert Hambrock <[email protected]>

4c10fd2a

Switch All `construct_runtime`s to New Syntax (#2979) · 757ae372

joe petrowski authored Jan 22, 2024



Clean up all the old syntax.

---------

Co-authored-by: command-bot <>
Co-authored-by: gupnik <[email protected]>
Co-authored-by: Nikhil Gupta <[email protected]>
Co-authored-by: Maksym H <[email protected]>

757ae372

Jan 18, 2024

Filter votes from disabled validators in `BackedCandidates` in process_inherent_data (#2889) · f8954093

Tsvetomir Dimitrov authored Jan 18, 2024



Backport of https://github.com/paritytech/polkadot-sdk/pull/1863 to
master

Extend candidate sanitation in paras_inherent by removing backing votes
from disabled validators. Check
https://github.com/paritytech/polkadot-sdk/issues/1592 for more details.

This change is related to the disabling strategy implementation
(https://github.com/paritytech/polkadot-sdk/pull/2226).

---------

Co-authored-by: ordian <[email protected]>
Co-authored-by: ordian <[email protected]>
Co-authored-by: Maciej <[email protected]>

f8954093

Rococo Identity Migration Part 2 + Bug Fix (#2946) · f5748688

joe petrowski authored Jan 18, 2024

Order:

- [x] Start People Chain
- [RPC
node](https://polkadot.js.org/apps/?rpc=wss%3A%2F%2Frococo-people-rpc.polkadot.io#/explorer)
- [x] Upgrade Rococo Relay (`EnsureRoot` -> `EnsureSigned`) (v1,006,002)
- Done
[here](https://rococo.subscan.io/extrinsic/0xef07e0f9dbb2b9e829305f132e6ce45d291239286e409177e20895e6687daa6c)
- [x] Migrate all identities
- Done, see extrinsics from [this
account](https://rococo.subscan.io/account/5FyNYrBwndvBttTkGUqGGCRAXtBH4Mh8xELDaxaFywTsjDKb)
- [x] Upgrade Rococo People (remove call filter) (v1,006,002)
- Authorized
[here](https://rococo.subscan.io/extrinsic/0xedf6a80229bd411b7ed8d3a489a767b0f773bed5c49239987a294c293a35b98b)

With added:

- [x] Upgrade Rococo People to fix `poke_deposit` bug (v1,006,001)
- Authorized
[here](https://rococo.subscan.io/extrinsic/0xd1dc3cd6e8274bd0196f8d9f13ed09f6e9c76e6a40f9786a1629f4cb22cf948d)

Note:

It's also possible to remove the Identity Migrator pallet from both the
Relay Chain and the parachain at this time. I will leave them in for now
to preserve the test cases until we run them on Kusama/Polkadot. We will
also want a follow up to remove all Identity-related state from the
Relay Chain.

f5748688

Jan 17, 2024

[Backport] Version bumps from 1.6.0 release (#2965) · f80cfc22

Egor_P authored Jan 17, 2024

This PR backports version bumps from release branch
`release-polkadot-v1.6.0` back to `master` and also moved `prdoc` files
related to the release to the appropriate folder

f80cfc22

Jan 16, 2024

XCMv4 (#1230) · 8428f678

Francisco Aguirre authored Jan 16, 2024



# Note for reviewer

Most changes are just syntax changes necessary for the new version.
Most important files should be the ones under the `xcm` folder.

# Description 

Added XCMv4.

## Removed `Multi` prefix
The following types have been renamed:
- MultiLocation -> Location
- MultiAsset -> Asset
- MultiAssets -> Assets
- InteriorMultiLocation -> InteriorLocation
- MultiAssetFilter -> AssetFilter
- VersionedMultiAsset -> VersionedAsset
- WildMultiAsset -> WildAsset
- VersionedMultiLocation -> VersionedLocation

In order to fix a name conflict, the `Assets` in `xcm-executor` were
renamed to `HoldingAssets`, as they represent assets in holding.

## Removed `Abstract` asset id

It was not being used anywhere and this simplifies the code.

Now assets are just constructed as follows:

```rust
let asset: Asset = (AssetId(Location::new(1, Here)), 100u128).into();
```

No need for specifying `Concrete` anymore.

## Outcome is now a named fields struct

Instead of

```rust
pub enum Outcome {
  Complete(Weight),
  Incomplete(Weight, Error),
  Error(Error),
}
```

we now have

```rust
pub enum Outcome {
  Complete { used: Weight },
  Incomplete { used: Weight, error: Error },
  Error { error: Error },
}
```

## Added Reanchorable trait

Now both locations and assets implement this trait, making it easier to
reanchor both.

## New syntax for building locations and junctions

Now junctions are built using the following methods:

```rust
let location = Location {
    parents: 1,
    interior: [Parachain(1000), PalletInstance(50), GeneralIndex(1984)].into()
};
```

or

```rust
let location = Location::new(1, [Parachain(1000), PalletInstance(50), GeneralIndex(1984)]);
```

And they are matched like so:

```rust
match location.unpack() {
  (1, [Parachain(id)]) => ...
  (0, Here) => ...,
  (1, [_]) => ...,
}
```

This syntax is mandatory in v4, and has been also implemented for v2 and
v3 for easier migration.

This was needed to make all sizes smaller.

# TODO
- [x] Scaffold v4
- [x] Port github.com/paritytech/polkadot/pull/7236
- [x] Remove `Multi` prefix
- [x] Remove `Abstract` asset id

---------

Co-authored-by: command-bot <>
Co-authored-by: Keith Yeung <[email protected]>

8428f678

Bump rococo relay and coretime-rococo to 1.6 (#2913) · a42a47f8
Dónal Murray authored Jan 16, 2024
```
Co-authored-by: command-bot <>
```
a42a47f8

Jan 12, 2024

Add More HRMP Channel Opening Tests (#2915) · f7306d32

joe petrowski authored Jan 12, 2024

A recent referendum failed because the parachain's sovereign account had
enough funds for the deposit (the runtime at the time required a
deposit) but not enough left over for the existential deposit, which
must remain free.

The current logic does not require a deposit for channels with system
chains, and the current tests check that none is taken. This new test
simply ensures that even without any balance in a parachain's sovereign
account, opening a channel with a system chain will be successful.

f7306d32

Jan 11, 2024

Fix coretime migration (#2905) · fc749fa7

Anton Vilhelm Ásgeirsson authored Jan 11, 2024



The XCM instruction limit of 100 was being hit by the 1 large message
before. The weight ref time also needed to be bumped for these
extrinsics.

---------

Co-authored-by: Bastian Köcher <[email protected]>

fc749fa7

Jan 10, 2024

Unique Usernames in Identity Pallet (#2651) · d1f678c0

joe petrowski authored Jan 10, 2024



This PR allows _username authorities_ to issue unique usernames that
correspond with an account. It also provides two-way lookup, that is
from `AccountId` to a single, "primary" `Username` (alongside
`Registration`) and multiple unique `Username`s to an `AccountId`.

Key features:

- Username Authorities added (and removed) via privileged origin.
- Authorities have a `suffix` and an `allocation`. They can grant up to
`allocation` usernames. Their `suffix` will be appended to the usernames
that they issue. A suffix may be up to 7 characters long.
- Users can ask an authority to grant them a username. This will take
the form `myusername.suffix`. The entire name (including suffix) must be
less than or equal to 32 alphanumeric characters.
- Users can approve a username for themselves in one of two ways (that
is, authorities cannot grant them arbitrarily):
- Pre-sign the entire username (including suffix) with a secret key that
corresponds to their `AccountId` (for keyed accounts, obviously); or
- Accept the username after it has been granted by an authority (it will
be queued until accepted) (for non-keyed accounts like pure proxies or
multisigs).
- The system does not require any funds or deposits. Users without an
identity will be given a default one (presumably all fields set to
`None`). If they update this info, they will need to place the normal
storage deposit.
- If a user does not have any username, their first one will be set as
`Primary`, and their `AccountId` will map to that one. If they get
subsequent usernames, they can choose which one to be their primary via
`set_primary_username`.
- There are some state cleanup functions to remove expired usernames
that have not been accepted and dangling usernames whose owners have
called `clear_identity`.

TODO:

- [x] Add migration to runtimes
- [x] Probably do off-chain migration into People Chain genesis
- [x] Address a few TODO questions in code (please review)

---------

Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Gonçalo Pestana <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Dónal Murray <[email protected]>

d1f678c0

Jan 09, 2024

Remove bounds from `PrevalidateAttests` struct definition (#2886) · 49cea35d

Oliver Tale-Yazdi authored Jan 09, 2024



Removing some bounds as it came up in
https://github.com/paritytech/polkadot-sdk/pull/2726 while still keeping
`Send + Sync` capabilities.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

49cea35d

Jan 08, 2024

Coretime Zombienet test (#2867) · 4fdab499

Bastian Köcher authored Jan 08, 2024



This adds a Zombienet test for Coretime.

Requires: https://github.com/paritytech/polkadot-sdk/pull/2862

---------

Co-authored-by: Javier Viola <[email protected]>
Co-authored-by: Javier Viola <[email protected]>

4fdab499

Jan 07, 2024

Bump the known_good_semver group with 4 updates (#2865) · 204fe7ff

dependabot[bot] authored Jan 07, 2024



Bumps the known_good_semver group with 4 updates:
[serde](https://github.com/serde-rs/serde),
[serde_json](https://github.com/serde-rs/json),
[clap](https://github.com/clap-rs/clap) and
[syn](https://github.com/dtolnay/syn).

Updates `serde` from 1.0.194 to 1.0.195
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/serde/releases">serde's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.195</h2>
<ul>
<li>Prevent remote definitions of tuple struct or tuple variant from
triggering dead_code warning (<a
href="https://redirect.github.com/serde-rs/serde/issues/2671">#2671</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/serde/commit/03eec42c3313b36da416be1486e9ecac345784d5"><code>03eec42</code></a>
Release 1.0.195</li>
<li><a
href="https://github.com/serde-rs/serde/commit/196f311ae2fd8ad94fe38a57830419859a4d3dbb"><code>196f311</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2671">#2671</a>
from dtolnay/deadremote</li>
<li><a
href="https://github.com/serde-rs/serde/commit/38d9e0b2091e9b6150486c2c37367819b86bcc39"><code>38d9e0b</code></a>
Revert &quot;Add FIXME to fix dead_code warning when using
serde(remote)&quot;</li>
<li><a
href="https://github.com/serde-rs/serde/commit/6502b3131697eff6420786ad71f87f29cfff3a13"><code>6502b31</code></a>
Fix new dead_code warning in tuple struct and tuple variant remote
defs</li>
<li><a
href="https://github.com/serde-rs/serde/commit/6f1a8c3115c8d2502178c25d610fbaee2e82c46b"><code>6f1a8c3</code></a>
Add FIXME to fix dead_code warning when using serde(remote)</li>
<li><a
href="https://github.com/serde-rs/serde/commit/d883c94cc9fe72d0512dc7f4def7191a401595c9"><code>d883c94</code></a>
Work around dead_code warning in tests</li>
<li><a
href="https://github.com/serde-rs/serde/commit/961fa59a7469c5b5e323b9723323df412048d60d"><code>961fa59</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2670">#2670</a>
from serde-rs/exhaustive</li>
<li><a
href="https://github.com/serde-rs/serde/commit/8bc71def551df190e6817d3311e5c76f751f53e6"><code>8bc71de</code></a>
Fill in omitted patterns for GenericArguments match</li>
<li><a
href="https://github.com/serde-rs/serde/commit/7c65a9dc0eab2d4d829b258a7b3549351bbe8dcd"><code>7c65a9d</code></a>
Pick up changes to non_exhaustive_omitted_patterns lint</li>
<li>See full diff in <a
href="https://github.com/serde-rs/serde/compare/v1.0.194...v1.0.195">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_json` from 1.0.110 to 1.0.111
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/json/releases">serde_json's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.111</h2>
<ul>
<li>Improve floating point parsing performance on loongarch64 (<a
href="https://redirect.github.com/serde-rs/json/issues/1100">#1100</a>,
thanks <a
href="https://github.com/heiher"><code>@heiher</code></a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/json/commit/0131ac68212e8094bd14ee618587d731b4f9a68b"><code>0131ac6</code></a>
Release 1.0.111</li>
<li><a
href="https://github.com/serde-rs/json/commit/96ecfadd3f7dd6366a2d07a098e228d15df93cb4"><code>96ecfad</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1100">#1100</a>
from heiher/limb-64-la64</li>
<li><a
href="https://github.com/serde-rs/json/commit/c80dbaf8ff5902ca670e0a48bbe495065b9314f5"><code>c80dbaf</code></a>
Set limb width to 64 for loongarch64</li>
<li>See full diff in <a
href="https://github.com/serde-rs/json/compare/v1.0.110...v1.0.111">compare
view</a></li>
</ul>
</details>
<br />

Updates `clap` from 4.4.12 to 4.4.13
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/releases">clap's
releases</a>.</em></p>
<blockquote>
<h2>v4.4.13</h2>
<h2>[4.4.13] - 2024-01-04</h2>
<h3>Documentation</h3>
<ul>
<li>Fix link to structopt migration guide</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.4.13] - 2024-01-04</h2>
<h3>Documentation</h3>
<ul>
<li>Fix link to structopt migration guide</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/2ab48b295c2463ce8c141a9868095b811ccf3b99"><code>2ab48b2</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/7a06a8cd619db704c6d826bf752eae3b86ce23a8"><code>7a06a8c</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/cca190efedf40f48147a3a4a777a9cc17728abdf"><code>cca190e</code></a>
docs: Correct link to StructOpt migration guide</li>
<li><a
href="https://github.com/clap-rs/clap/commit/5c31f453c1a9f46109db8e0a47ed212748c0556c"><code>5c31f45</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5281">#5281</a>
from Manishearth/safety-docs</li>
<li><a
href="https://github.com/clap-rs/clap/commit/ddae7e6f411c4c87294212152b8d9beea16637e7"><code>ddae7e6</code></a>
Correct safety docs</li>
<li><a
href="https://github.com/clap-rs/clap/commit/48d28aa689bfd0fb44ec025244b30ba261e2515a"><code>48d28aa</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/748ce18cc2ccc3f7c07fa8b7c5b6f90ed9242b72"><code>748ce18</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/adbe6ec4cb6a617070c41927a389d0bea7b30936"><code>adbe6ec</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5278">#5278</a>
from henry-hsieh/fix-nosort</li>
<li><a
href="https://github.com/clap-rs/clap/commit/2b48858ba84c62e9af97bee4734d70530254cd8a"><code>2b48858</code></a>
fix: Skip nosort option below bash 4.4</li>
<li><a
href="https://github.com/clap-rs/clap/commit/777b744102cde324dc75534ef043efc15a9f40be"><code>777b744</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5277">#5277</a>
from clap-rs/renovate/actions-setup-python-5.x</li>
<li>Additional commits viewable in <a
href="https://github.com/clap-rs/clap/compare/v4.4.12...v4.4.13">compare
view</a></li>
</ul>
</details>
<br />

Updates `syn` from 2.0.47 to 2.0.48
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/syn/releases">syn's
releases</a>.</em></p>
<blockquote>
<h2>2.0.48</h2>
<ul>
<li>Improve error message on unexpected token after <code>else</code>
(<a
href="https://redirect.github.com/dtolnay/syn/issues/1578">#1578</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/syn/commit/5e16fc24e68b16a381cb7ef22455dba9db143083"><code>5e16fc2</code></a>
Release 2.0.48</li>
<li><a
href="https://github.com/dtolnay/syn/commit/dc40084b15ab4a443179fc39cbadac6452408838"><code>dc40084</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1578">#1578</a>
from dtolnay/elseblock</li>
<li><a
href="https://github.com/dtolnay/syn/commit/82fcefce69d36e78301936c5af91f005d6a24357"><code>82fcefc</code></a>
Fix error message on unexpected token after 'else'</li>
<li><a
href="https://github.com/dtolnay/syn/commit/e8a5c68ad45194e575a923f6b1e08f1817196331"><code>e8a5c68</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1576">#1576</a>
from dtolnay/exhaustive</li>
<li><a
href="https://github.com/dtolnay/syn/commit/97b1df6d935cb4801f4090782304577c8574d024"><code>97b1df6</code></a>
Pick up changes to non_exhaustive_omitted_patterns lint</li>
<li>See full diff in <a
href="https://github.com/dtolnay/syn/compare/2.0.47...2.0.48">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

204fe7ff