- Feb 23, 2024
-
-
Serban Iorga authored
Related to https://github.com/paritytech/polkadot-sdk/issues/3400 Extracting small parts of https://github.com/paritytech/polkadot-sdk/pull/3429 into separate PR: - Add support for BHP local and BHK local - Increase the timeout for the bridge zomienet tests
-
- Feb 22, 2024
-
-
Bastian Köcher authored
This introduces a check to ensure that the parachain code matches the validation code stored in the relay chain state. If not, it will print a warning. This should be mainly useful for parachain builders to make sure they have setup everything correctly.
-
Adrian Catangiu authored
As part of BEEFY worker/voter initialization the task waits for certain chain and backend conditions to be fulfilled: - BEEFY consensus enabled on-chain & GRANDPA best finalized higher than on-chain BEEFY genesis block, - backend has synced headers for BEEFY mandatory blocks between best BEEFY and best GRANDPA. During this waiting time, any messages gossiped on the BEEFY topic for current chain get enqueued in the gossip engine, leading to RAM bloating and output warning/error messages when the wait time is non-negligible (like during a clean sync). This PR adds logic to pump the gossip engine while waiting for other things to make sure gossiped messages get consumed (practically discarded until worker is fully initialized). Also raises the warning threshold for enqueued messages from 10k to 100k. This is in line with the other gossip protocols on the node. Fixes https://github.com/paritytech/polkadot-sdk/issues/3390 --------- Signed-off-by:
Adrian Catangiu <[email protected]>
-
Koute authored
This PR fixes a subtle bug in `wasm-builder` first introduced in https://github.com/paritytech/polkadot-sdk/pull/1851 (sorry, my bad! I should have caught this during review) where the status code of the `cargo` subprocess is not properly checked, which results in builds silently succeeding when they shouldn't (that is: if we successfully build a runtime blob, and then modify the code so that it won't compile, and recompile it again, then the build will succeed and silently use the *old* blob). cc @athei This is the bug you were seeing. [edit]Also fixes a similar PolkaVM-specific bug where I accidentally used the wrong comparison operator.[/edit]
-
Egor_P authored
This PR adds two more public channels in matrix where should the release announcements go
-
Andrei Sandu authored
First step in implementing https://github.com/paritytech/polkadot-sdk/issues/3144 ### Summary of changes - switch statement `Table` candidate mapping from `ParaId` to `CoreIndex` - introduce experimental `InjectCoreIndex` node feature. - determine and assume a `CoreIndex` for a candidate based on statement validator index. If the signature is valid it means validator controls the validator that index and we can easily map it to a validator group/core. - introduce a temporary provisioner fix until we fully enable elastic scaling in the subystem. The fix ensures we don't fetch the same backable candidate when calling `get_backable_candidate` for each core. TODO: - [x] fix backing tests - [x] fix statement table tests - [x] add new test --------- Signed-off-by:
Andrei Sandu <[email protected]> Signed-off-by:
alindima <[email protected]> Co-authored-by:
alindima <[email protected]>
-
Oliver Tale-Yazdi authored
Closes https://github.com/paritytech/polkadot-sdk/issues/2713 --------- Signed-off-by:
Oliver Tale-Yazdi <[email protected]> Co-authored-by:
André Silva <[email protected]>
-
- Feb 21, 2024
-
-
Matteo Muraca authored
part of #3326 @ggwpez @Kianenigma @shawntabrizi --------- Signed-off-by:
Matteo Muraca <[email protected]> Co-authored-by:
Kian Paimani <[email protected]>
-
tmpolaczyk authored
In Tanssi, we need a way to stop the collator code and then start it again. This is to support rotating the same collator between different runtimes. Currently, this works very well, except for the proposer metrics, because they only get registered the first time they are started. Afterwards, we see this warning log: > Failed to register proposer prometheus metrics: Duplicate metrics collector registration attempted ~~So this PR adds a method to set metrics, to allow us to register metrics manually before creating the `ProposerFactory`, and then clone the same metrics every time we need to start the collator.~~ Implemented Clone instead
-
Alexandru Vasile authored
This PR backports the changes from the rpc-v2 spec: https://github.com/paritytech/json-rpc-interface-spec/pull/134 The `Broadcasted` event has been removed: - it is hard to enforce a `Dropped { broadcasted: bool }` event in cases of a load-balancer being placed in front of an RPC server - when the server exists, it is impossible to guarantee this field if the server did not previously send a `Broadcasted` event - the number of peers reported by this event does not guarantee that peers are unique - the same peer can disconnect and reconnect, increasing this metric number - the number of peers that receive this transaction offers no guarantee about the transaction being included in the chain at a later time cc @paritytech/subxt-team --------- Signed-off-by:
Alexandru Vasile <[email protected]> Co-authored-by:
James Wilson <[email protected]>
-
Dastan authored
closes #2844 - adds `list-pallets` option which prints all unique available pallets for benchmarking ```bash ./target/release/node benchmark pallet --list=pallets ``` - adds `all` option which runs benchmarks for all available pallets and extrinsics (equivalent to `--pallet * --extrinsic *`) ```bash ./target/release/node benchmark pallet --all ``` - use the `list=pallets` syntax in `run_all_benchmarks.sh` script cc ggwpez --------- Co-authored-by:
Bastian Köcher <[email protected]>
-
Clara van Staden authored
- Adds a test to check the correct digest for Snowbridge outbound messages. For the correct digest to be in the block, the the MessageQueue pallet should be configured after the EthereumOutbound queue pallet. The added test fails if the EthereumOutbound is configured after the MessageQueue pallet. - Adds a helper method `run_to_block_with_finalize` to simulate the block finalizing. The existing `run_to_block` method does not finalize and so it cannot successfully test this condition. Closes: https://github.com/paritytech/polkadot-sdk/issues/3208 --------- Co-authored-by: claravanstaden <Cats 4 life!>
-
Egor_P authored
This PR should fix the issue with the failing GHA which sends notifications to the different matrix channels, when the new release is published
-
-
Alexander Theißen authored
This PR is fixing a bug in the sync mechanism between wasmi and pallet-contracts. This bug leads to essentially double charging all the gas that was used during the execution of the host function. When the `call` host function is used for recursion this will lead to a quadratic amount of gas consumption with regard to the nesting depth.We also took the chance to refactor the code in question and improve the rust docs. The bug was caused by not updating `GasMeter::executor_consumed` (previously `engine_consumed`) when leaving the host function. This lead to the value being stale (too low) when entering another host function. --------- Co-authored-by:
PG Herveou <[email protected]>
-
- Feb 20, 2024
-
-
girazoki authored
I dont think this bound is required by anything else and it allows now to use this struct with runtimes that have 20 bytes accounts --------- Co-authored-by:
Bastian Köcher <[email protected]>
-
Oliver Tale-Yazdi authored
Did not realize that https://github.com/paritytech/polkadot-sdk/pull/3370 was indeed breaking. cc @muraca --------- Signed-off-by:
Oliver Tale-Yazdi <[email protected]>
-
dependabot[bot] authored
Bumps the known_good_semver group with 5 updates: | Package | From | To | | --- | --- | --- | | [serde](https://github.com/serde-rs/serde) | `1.0.196` | `1.0.197` | | [serde_json](https://github.com/serde-rs/json) | `1.0.113` | `1.0.114` | | [syn](https://github.com/dtolnay/syn) | `2.0.49` | `2.0.50` | | [serde_yaml](https://github.com/dtolnay/serde-yaml) | `0.9.31` | `0.9.32` | | [serde_derive](https://github.com/serde-rs/serde) | `1.0.196` | `1.0.197` | Updates `serde` from 1.0.196 to 1.0.197 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/serde/releases">serde's releases</a>.</em></p> <blockquote> <h2>v1.0.197</h2> <ul> <li>Fix unused_imports warnings when compiled by rustc 1.78</li> <li>Optimize code size of some Display impls (<a href="https://redirect.github.com/serde-rs/serde/issues/2697">#2697</a>, thanks <a href="https://github.com/nyurik"><code>@nyurik</code></a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/serde/commit/5fa711d75d91173aafc6019e03cf8af6ac9ba7b2"><code>5fa711d</code></a> Release 1.0.197</li> <li><a href="https://github.com/serde-rs/serde/commit/f5d8ae423aa195d3423029ff5a618266cc8ff9a5"><code>f5d8ae4</code></a> Resolve prelude redundant import warnings</li> <li><a href="https://github.com/serde-rs/serde/commit/1d54973b928bd8708a4ad2d90fca1203367ff580"><code>1d54973</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2697">#2697</a> from nyurik/format-str</li> <li><a href="https://github.com/serde-rs/serde/commit/b8fafefd8588f84af54329945fab701ec414281d"><code>b8fafef</code></a> A few minor <code>write_str</code> optimizations and inlining</li> <li><a href="https://github.com/serde-rs/serde/commit/c42ebb8839fbd92dbda6729e8363c8d683f26306"><code>c42ebb8</code></a> Update ui test suite to nightly-2024-02-12</li> <li><a href="https://github.com/serde-rs/serde/commit/9e680620b595724a6abfb8e785155d02482f911a"><code>9e68062</code></a> Ignore incompatible_msrv clippy lint for conditionally compiled code</li> <li><a href="https://github.com/serde-rs/serde/commit/846f865de2e94408e0edc6a2c6863c063cd234be"><code>846f865</code></a> Ignore dead_code warnings in test</li> <li>See full diff in <a href="https://github.com/serde-rs/serde/compare/v1.0.196...v1.0.197">compare view</a></li> </ul> </details> <br /> Updates `serde_json` from 1.0.113 to 1.0.114 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/json/releases">serde_json's releases</a>.</em></p> <blockquote> <h2>v1.0.114</h2> <ul> <li>Fix unused_imports warnings when compiled by rustc 1.78</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/json/commit/e1b3a6d8a161ff5ec4865b487d148c17d0188e3e"><code>e1b3a6d</code></a> Release 1.0.114</li> <li><a href="https://github.com/serde-rs/json/commit/6fb70262e894168ac631b2232a1b7b3a7781ebe5"><code>6fb7026</code></a> Work around prelude redundant import warnings</li> <li><a href="https://github.com/serde-rs/json/commit/34a04c5f7febdf80e05743e38d5cb1880a83b6f6"><code>34a04c5</code></a> Ignore incompatible_msrv clippy false positives in test</li> <li><a href="https://github.com/serde-rs/json/commit/ca05f69943e18d70c2219ea41fcb67f2849b7eed"><code>ca05f69</code></a> Remove unused Float::is_sign_negative trait method</li> <li>See full diff in <a href="https://github.com/serde-rs/json/compare/v1.0.113...v1.0.114">compare view</a></li> </ul> </details> <br /> Updates `syn` from 2.0.49 to 2.0.50 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/dtolnay/syn/releases">syn's releases</a>.</em></p> <blockquote> <h2>2.0.50</h2> <ul> <li>Fix unused_imports warnings when compiled by rustc 1.78</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/dtolnay/syn/commit/0dae01509e1dfc1734b0e8097c16338b56503242"><code>0dae015</code></a> Release 2.0.50</li> <li><a href="https://github.com/dtolnay/syn/commit/2b493c34211a605a84eb5f1618e49818f8b654e6"><code>2b493c3</code></a> Update location of Pat variant aliases</li> <li><a href="https://github.com/dtolnay/syn/commit/07a435df6739d47d54e933970eddfc6764bd519d"><code>07a435d</code></a> Fix doc links now that crate::* is no longer imported</li> <li><a href="https://github.com/dtolnay/syn/commit/713f932b85698b1b2d561cc98e5b6f9643c9afde"><code>713f932</code></a> Eliminate glob imports</li> <li><a href="https://github.com/dtolnay/syn/commit/6eb82a997589cf9c5b2bb36716443a19c4440c5e"><code>6eb82a9</code></a> Eliminate glob imports from codegen</li> <li><a href="https://github.com/dtolnay/syn/commit/896a7306ee36a4c7dc96e1bf61e247e53df47179"><code>896a730</code></a> Eliminate glob imports from examples</li> <li><a href="https://github.com/dtolnay/syn/commit/866c80ce2f39e8e2e723bb5440fdd58e4e1de3b6"><code>866c80c</code></a> Update test suite to nightly-2024-02-18</li> <li><a href="https://github.com/dtolnay/syn/commit/d4b499e3907295a7173fbc6f8ca34388583795f6"><code>d4b499e</code></a> Update test suite to nightly-2024-02-17</li> <li><a href="https://github.com/dtolnay/syn/commit/38956e60405920fdf856a0128a804460913c8c0c"><code>38956e6</code></a> Update test suite to nightly-2024-02-16</li> <li>See full diff in <a href="https://github.com/dtolnay/syn/compare/2.0.49...2.0.50">compare view</a></li> </ul> </details> <br /> Updates `serde_yaml` from 0.9.31 to 0.9.32 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/dtolnay/serde-yaml/releases">serde_yaml's releases</a>.</em></p> <blockquote> <h2>0.9.32</h2> <ul> <li>Fix unused_imports warnings when compiled by rustc 1.78</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/dtolnay/serde-yaml/commit/ea57d8cdeb6b2d0060aaeec6c934d0f494722765"><code>ea57d8c</code></a> Release 0.9.32</li> <li><a href="https://github.com/dtolnay/serde-yaml/commit/a52b7ac3f42aad7f587409d2e431ed2fe5db7b31"><code>a52b7ac</code></a> Resolve prelude redundant import warnings</li> <li><a href="https://github.com/dtolnay/serde-yaml/commit/9e0b8d337b1c19fe250454da3bce9fc12b6cd634"><code>9e0b8d3</code></a> Replace curly quotes with ascii straight quotes</li> <li>See full diff in <a href="https://github.com/dtolnay/serde-yaml/compare/0.9.31...0.9.32">compare view</a></li> </ul> </details> <br /> Updates `serde_derive` from 1.0.196 to 1.0.197 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/serde/releases">serde_derive's releases</a>.</em></p> <blockquote> <h2>v1.0.197</h2> <ul> <li>Fix unused_imports warnings when compiled by rustc 1.78</li> <li>Optimize code size of some Display impls (<a href="https://redirect.github.com/serde-rs/serde/issues/2697">#2697</a>, thanks <a href="https://github.com/nyurik"><code>@nyurik</code></a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/serde/commit/5fa711d75d91173aafc6019e03cf8af6ac9ba7b2"><code>5fa711d</code></a> Release 1.0.197</li> <li><a href="https://github.com/serde-rs/serde/commit/f5d8ae423aa195d3423029ff5a618266cc8ff9a5"><code>f5d8ae4</code></a> Resolve prelude redundant import warnings</li> <li><a href="https://github.com/serde-rs/serde/commit/1d54973b928bd8708a4ad2d90fca1203367ff580"><code>1d54973</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2697">#2697</a> from nyurik/format-str</li> <li><a href="https://github.com/serde-rs/serde/commit/b8fafefd8588f84af54329945fab701ec414281d"><code>b8fafef</code></a> A few minor <code>write_str</code> optimizations and inlining</li> <li><a href="https://github.com/serde-rs/serde/commit/c42ebb8839fbd92dbda6729e8363c8d683f26306"><code>c42ebb8</code></a> Update ui test suite to nightly-2024-02-12</li> <li><a href="https://github.com/serde-rs/serde/commit/9e680620b595724a6abfb8e785155d02482f911a"><code>9e68062</code></a> Ignore incompatible_msrv clippy lint for conditionally compiled code</li> <li><a href="https://github.com/serde-rs/serde/commit/846f865de2e94408e0edc6a2c6863c063cd234be"><code>846f865</code></a> Ignore dead_code warnings in test</li> <li>See full diff in <a href="https://github.com/serde-rs/serde/compare/v1.0.196...v1.0.197 ">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by:
dependabot[bot] <[email protected]> Co-authored-by:
dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
-
Branislav Kontur authored
-
Niklas Adolfsson authored
The rationale behind this, is that it may be useful for some users actually disable RPC batch requests or limit them by length instead of the total size bytes of the batch. This PR adds two new CLI options: ``` --rpc-disable-batch-requests - disable batch requests on the server --rpc-max-batch-request-len <LEN> - limit batches to LEN on the server. ```
-
Branislav Kontur authored
Externalize received fees checks from `receive_reserve_asset_deposited_from_different_consensus_works` (#3409) Backport of patch-fix: https://github.com/paritytech/polkadot-sdk/pull/3404
-
PG Herveou authored
Remove `#[unstable]` on `call_v2`, `instantiate_v2`, `lock_delegate_dependency` and `unlock_delegate_dependency`. See ink! integrations: - call_v2: https://github.com/paritytech/ink/pull/2077 - instantiate_v2: <TODO> - lock/unlock dependency: https://github.com/paritytech/ink/pull/2076
-
Oliver Tale-Yazdi authored
Lifting some more dependencies to the workspace. Just using the most-often updated ones for now. It can be reproduced locally. ```sh # First you can check if there would be semver incompatible bumps (looks good in this case): $ zepter transpose dependency lift-to-workspace --ignore-errors syn quote thiserror "regex:^serde.*" # Then apply the changes: $ zepter transpose dependency lift-to-workspace --version-resolver=highest syn quote thiserror "regex:^serde.*" --fix # And format the changes: $ taplo format --config .config/taplo.toml ``` --------- Signed-off-by:
Oliver Tale-Yazdi <[email protected]>
-
Bastian Köcher authored
This spams logs in `Debug` with no useful information.
-
girazoki authored
Implements the `ConversionToAssetBalance` trait to asset-rate by doing `1/rate*(balance)`.
-
- Feb 19, 2024
-
-
PG Herveou authored
## Xcm changes: - Fix `pallet_xcm::execute`, move the logic into The `ExecuteController` so it can be shared with anything that implement that trait. - Make `ExecuteController::execute` retursn `DispatchErrorWithPostInfo` instead of `DispatchError`, so that we don't charge the full `max_weight` provided if the execution is incomplete (useful for force_batch or contracts calls) - Fix docstring for `pallet_xcm::execute`, to reflect the changes from #2405 - Update the signature for `ExecuteController::execute`, we don't need to return the `Outcome` anymore since we only care about `Outcome::Complete` ## Contracts changes: - Update host fn `xcm_exexute`, we don't need to write the `Outcome` to the sandbox memory anymore. This was also not charged as well before so it if fixes this too. - One of the issue was that the dry_run of a contract that call `xcm_execute` would exhaust the `gas_limit`. This is because `XcmExecuteController::execute` takes a `max_weight` argument, and since we don't want the user to specify it manually we were passing everything left by pre-charghing `ctx.ext.gas_meter().gas_left()` - To fix it I added a `fn influence_lowest_limit` on the `Token` trait and make it return false for `RuntimeCost::XcmExecute`. - Got rid of the `RuntimeToken` indirection, we can just use `RuntimeCost` directly. --------- Co-authored-by: command-bot <>
-
Anton Vilhelm Ásgeirsson authored
Adds the coretime and on demand pallets to enable Coretime on Westend. In order for the migration to run successfully, we need the Broker/Coretime parachain to be live. TODO: - [ ] Broker parachain is live https://github.com/paritytech/polkadot-sdk/pull/3272 --------- Co-authored-by: command-bot <> Co-authored-by:
Bastian Köcher <[email protected]>
-
Matteo Muraca authored
part of #3326 @ggwpez @Kianenigma @shawntabrizi --------- Signed-off-by:
Matteo Muraca <[email protected]> Co-authored-by:
Kian Paimani <[email protected]>
-
Alexandru Gheorghe authored
~The previous fix was actually incomplete because we update the authorties only on the situation where we decided to reconnect because we had a low connectivity issue. Now the problem is that update_authority_ids use the list of connected peers, so on restart that does contain anything, so calling immediately after issue_connection_request won't detect all authorities, so we need to also check every block as the comment said, but that did not match the code.~ Actually the fix was correct the flow is follow if more than 1/3 of the authorities can not be resolved we set last_failure and call `ConnectToResolvedValidators`. We will call UpdateAuthorities for all the authorities already connected and for which we already know the address and for the ones that will connect later on `PeerConnected` will have the AuthorityId field set, because it is already known, so approval-distribution will update its cache topology. --------- Signed-off-by:
Alexandru Gheorghe <[email protected]> Co-authored-by:
Alexander Samusev <[email protected]>
-
Gilt0 authored
# Description This PR removes redundant type definition from test definition config implementations like ``` #[derive_impl(frame_system::config_preludes::TestDefaultConfig as frame_system::DefaultConfig)] impl frame_system::Config for Test { type A = A; ... } ``` This changes avoid redundancies in the code as the macro `derive_impl` defines the relevant types. To implement the changes, it was a simple fact of running tests and making sure that the tests would still run while the definition would be removed. Closes #3237 As a note, here is a brief account of things done from the Issue's description statement ``` alliance migrate alliance, fast-unstake and bags list to use derive-impl #1636 asset-conversion DONE asset-rate DONE assets DONE atomic-swap DONE aura DONE authority-discovery DONE authorship migrate babe and authorship to use derive-impl #1790 babe migrate babe and authorship to use derive-impl #1790 bags-list migrate alliance, fast-unstake and bags list to use derive-impl #1636 balances DONE beefy NOTHING TO DO --- also noted this error without failing tests Feb 13 13:49:08.941 ERROR runtime::timestamp: `pallet_timestamp::UnixTime::now` is called at genesis, invalid value returned: 0 beefy-mmr NOTHING TO DO bounties DONE child-bounties DONE collective DONE contracts DONE conviction-voting DONE core-fellowship NOTHING TO DO democracy DONE election-provider-multi-phase NOTHING TO DO elections-phragmen DONE executive NOTHING TO DO fast-unstake migrate alliance, fast-unstake and bags list to use derive-impl #1636 glutton DONE grandpa DONE identity DONE im-online NOTHING TO DO indices Refactor indices pallet #1789 insecure-randomness-collective-flip DONE lottery DONE membership DONE merkle-mountain-range NOTHING TO DO message-queue DONE multisig add frame_system::DefaultConfig to individual pallet DefaultConfigs substrate#14453 nft-fractionalization DONE nfts DONE nicks Refactor pallet-state-trie-migration to fungible::* traits #1801 NOT IN REPO nis DONE node-authorization DONE nomination-pools NOTHING TO DO -- ONLY impl for Runtime offences DELETED EVERYTHING -- IS THAT CORRECT?? preimage DONE proxy add frame_system::DefaultConfig to individual pallet DefaultConfigs substrate#14453 ranked-collective NOTHING TO DO recovery DONE referenda DONE remark DONE root-offences DONE root-testing NOTHING TO DO salary NOTHING TO DO scheduler DONE scored-pool DONE session DONE -- substrate/frame/session/benchmarking/src/mock.rs untouched society NOTHING TO DO staking DONE staking-bags-benchmarks NOT IN REPO state-trie-migration NOTHING TO DO statement DONE sudo DONE system DONE timestamp DONE tips DONE transaction-payment NOTHING TO DO transaction-storage NOTHING TO DO treasury DONE try-runtime NOTHING TO DO -- no specific mention of 'for Test' uniques DONE utility DONE vesting DONE whitelist DONE ``` --------- Co-authored-by: command-bot <> Co-authored-by:
gupnik <[email protected]>
-
Bulat Saifullin authored
Update coretime-westend bootnodes
-
s0me0ne-unkn0wn authored
This is a follow-up for `im-online` pallet removal that is cleaning up its off-chain storage. Must be merged no earlier than #2265 is enacted. Related: #1964 --------- Co-authored-by:
Bastian Köcher <[email protected]>
-
dependabot[bot] authored
Bumps the known_good_semver group with 1 update: [clap](https://github.com/clap-rs/clap). Updates `clap` from 4.5.0 to 4.5.1 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/releases">clap's releases</a>.</em></p> <blockquote> <h2>v4.5.1</h2> <h2>[4.5.1] - 2024-02-16</h2> <h3>Fixes</h3> <ul> <li><em>(error)</em> Include suggestion to add <code>--</code> even if there is a "did you mean" so long as <code>last</code> or <code>trailing_var_arg</code> is used</li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's changelog</a>.</em></p> <blockquote> <h2>[4.5.1] - 2024-02-16</h2> <h3>Fixes</h3> <ul> <li><em>(error)</em> Include suggestion to add <code>--</code> even if there is a "did you mean" so long as <code>last</code> or <code>trailing_var_arg</code> is used</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/clap-rs/clap/commit/0c01b5558de0a1a513a2af429981099e550d1a78"><code>0c01b55</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/08e0b5bde4b45567be98d12e7d394762fa8da6a4"><code>08e0b5b</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/f2c4e6ec740cce29cea3fd7232e4d2716f089fc2"><code>f2c4e6e</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5359">#5359</a> from poliorcetics/ab/push-szymvyzpmnqx</li> <li><a href="https://github.com/clap-rs/clap/commit/e782775229081697e47d340a155d6b087eeb46f8"><code>e782775</code></a> fix(complete): Handle newlines in command/arg descriptions</li> <li><a href="https://github.com/clap-rs/clap/commit/fba7c8597bf3028400d6f6a22d83cedb7a2bd5a5"><code>fba7c85</code></a> test(complete): Show newline issue</li> <li><a href="https://github.com/clap-rs/clap/commit/8a7a13a5618cfdc4ff328624a5266e7b4d88649a"><code>8a7a13a</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/7b3a3e1e5eee57fc37110343b980cbe8170d20ad"><code>7b3a3e1</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/7b624ca74336f6f14f01007b9039990d53acda0f"><code>7b624ca</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5356">#5356</a> from epage/escape</li> <li><a href="https://github.com/clap-rs/clap/commit/446328a8d3cdaac28884bf8fdfcc85f35c8b5134"><code>446328a</code></a> fix(error): Include -- in more cases</li> <li><a href="https://github.com/clap-rs/clap/commit/7de6df878238ca8e3d9723bb9650f7fe9470d8bd"><code>7de6df8</code></a> test(error): Show existing last behavior</li> <li>Additional commits viewable in <a href="https://github.com/clap-rs/clap/compare/clap_complete-v4.5.0...clap_complete-v4.5.1">compare view</a></li> </ul> </details> <br /> [![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=clap&package-manager=cargo&previous-version=4.5.0&new-version=4.5.1)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores ) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by:
dependabot[bot] <[email protected]> Co-authored-by:
dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
-
- Feb 18, 2024
-
-
s0me0ne-unkn0wn authored
-
Koute authored
Fixes https://github.com/paritytech/polkadot-sdk/issues/3352
-
s0me0ne-unkn0wn authored
A follow-up of #2265. Removes weights no longer needed.
-
- Feb 17, 2024
-
-
Oliver Tale-Yazdi authored
Changes: - Add `integrity_check` to trait `TracksInfo` to assert the sorting - Use the check in `integrity_test` - Rely upon sorted property in the `info` for speedup Note that the pallet already relies upon this (so far) untested assumption [here](https://github.com/paritytech/polkadot-sdk/blob/44c7a5eb8c375d77f685abf585961421e5f8b228/substrate/frame/referenda/src/lib.rs#L1280 ). --------- Signed-off-by:
Oliver Tale-Yazdi <[email protected]> Co-authored-by:
Bastian Köcher <[email protected]>
-
Niklas Adolfsson authored
Add RPC server rate limiting which can be utilized by the CLI `--rpc-rate-limit <calls/per minute>` Resolves first part of https://github.com/paritytech/polkadot-sdk/issues/3028 //cc @PierreBesson @kogeler you might be interested in this one --------- Co-authored-by:
James Wilson <[email protected]> Co-authored-by:
Xiliang Chen <[email protected]>
-
ordian authored
- [x] test with zombienet-sdk - [x] prdoc Relevant Issues: https://github.com/paritytech/polkadot-sdk/issues/3314 (connected to the cause) https://github.com/paritytech/polkadot-sdk/issues/3345 (solves) --------- Co-authored-by:
Kian Paimani <[email protected]>
-
- Feb 16, 2024
-
-
Javier Viola authored
Fix image tag to use in merge queues tests, currently is failing because is using the wrong tag (e.g https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/5224342). Thx!
-