- Feb 13, 2024
-
-
Branislav Kontur authored
I found out during the cleanup of this deprecation message in the `polkadot-fellows` repository that we deprecated `CurrencyAdapter` without making the recommended changes. ## TODO - [ ] fix `polkadot-fellows` bump to 1.6.0 https://github.com/polkadot-fellows/runtimes/pull/159 --------- Co-authored-by:Francisco Aguirre <[email protected]>
-
- Feb 12, 2024
-
-
Oliver Tale-Yazdi authoredChanges (partial https://github.com/paritytech/polkadot-sdk/issues/994): - Set log to `0.4.20` everywhere - Lift `log` to the workspace Starting with a simpler one after seeing https://github.com/paritytech/polkadot-sdk/pull/2065 from @jsdw . This sets the `default-features` to `false` in the root and then overwrites that in each create to its original value. This is necessary since otherwise the `default` features are additive and its impossible to disable them in the crate again once they are enabled in the workspace. I am using a tool to do this, so its mostly a test to see that it works as expected. --------- Signed-off-by:
Oliver Tale-Yazdi <[email protected]>
-
- Feb 08, 2024
-
-
Louis Merlin authored
This adds `try_state()` and `integrity_test()` to the four runtimes of the XCM-simulator fuzzer. With this, we are able to stress-test [message-queue's try_state](https://github.com/paritytech/polkadot-sdk/blob/7df1ae3b/substrate/frame/message-queue/src/lib.rs#L1245-L1347). This also adds the `Transact` block-listing from #2424 to avoid false-positives. Thank you @ggwpez for the help with the runtime configurations.
-
- Jan 31, 2024
-
-
Branislav Kontur authored
[frame] `#[pallet::composite_enum]` improved variant count handling + removed `pallet_balances`'s `MaxHolds` config (#2657) I started this investigation/issue based on @liamaharon question [here](https://github.com/paritytech/polkadot-sdk/pull/1801#discussion_r1410452499). ## Problem The `pallet_balances` integrity test should correctly detect that the runtime has correct distinct `HoldReasons` variant count. I assume the same situation exists for RuntimeFreezeReason. It is not a critical problem, if we set `MaxHolds` with a sufficiently large value, everything should be ok. However, in this case, the integrity_test check becomes less useful. **Situation for "any" runtime:** - `HoldReason` enums from different pallets: ```rust /// from pallet_nis #[pallet::composite_enum] pub enum HoldReason { NftReceipt, } /// from pallet_preimage #[pallet::composite_enum] pub enum HoldReason { Preimage, } // from pallet_state-trie-migration #[pallet::composite_enum] pub enum HoldReason { SlashForContinueMigrate, SlashForMigrateCustomTop, SlashForMigrateCustomChild, } ``` - generated `RuntimeHoldReason` enum looks like: ```rust pub enum RuntimeHoldReason { #[codec(index = 32u8)] Preimage(pallet_preimage::HoldReason), #[codec(index = 38u8)] Nis(pallet_nis::HoldReason), #[codec(index = 42u8)] StateTrieMigration(pallet_state_trie_migration::HoldReason), } ``` - composite enum `RuntimeHoldReason` variant count is detected as `3` - we set `type MaxHolds = ConstU32<3>` - `pallet_balances::integrity_test` is ok with `3`(at least 3) However, the real problem can occur in a live runtime where some functionality might stop working. This is due to a total of 5 distinct hold reasons (for pallets with multi-instance support, it is even more), and not all of them can be used because of an incorrect `MaxHolds`, which is deemed acceptable according to the `integrity_test`: ``` // pseudo-code - if we try to call all of these: T::Currency::hold(&pallet_nis::HoldReason::NftReceipt.into(), &nft_owner, deposit)?; T::Currency::hold(&pallet_preimage::HoldReason::Preimage.into(), &nft_owner, deposit)?; T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForContinueMigrate.into(), &nft_owner, deposit)?; // With `type MaxHolds = ConstU32<3>` these two will fail T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomTop.into(), &nft_owner, deposit)?; T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomChild.into(), &nft_owner, deposit)?; ``` ## Solutions A macro `#[pallet::*]` expansion is extended of `VariantCount` implementation for the `#[pallet::composite_enum]` enum type. This expansion generates the `VariantCount` implementation for pallets' `HoldReason`, `FreezeReason`, `LockId`, and `SlashReason`. Enum variants must be plain enum values without fields to ensure a deterministic count. The composite runtime enum, `RuntimeHoldReason` and `RuntimeFreezeReason`, now sets `VariantCount::VARIANT_COUNT` as the sum of pallets' enum `VariantCount::VARIANT_COUNT`: ```rust #[frame_support::pallet(dev_mode)] mod module_single_instance { #[pallet::composite_enum] pub enum HoldReason { ModuleSingleInstanceReason1, ModuleSingleInstanceReason2, } ... } #[frame_support::pallet(dev_mode)] mod module_multi_instance { #[pallet::composite_enum] pub enum HoldReason<I: 'static = ()> { ModuleMultiInstanceReason1, ModuleMultiInstanceReason2, ModuleMultiInstanceReason3, } ... } impl self::sp_api_hidden_includes_construct_runtime::hidden_include::traits::VariantCount for RuntimeHoldReason { const VARIANT_COUNT: u32 = 0 + module_single_instance::HoldReason::VARIANT_COUNT + module_multi_instance::HoldReason::<module_multi_instance::Instance1>::VARIANT_COUNT + module_multi_instance::HoldReason::<module_multi_instance::Instance2>::VARIANT_COUNT + module_multi_instance::HoldReason::<module_multi_instance::Instance3>::VARIANT_COUNT; } ``` In addition, `MaxHolds` is removed (as suggested [here](https://github.com/paritytech/polkadot-sdk/pull/2657#discussion_r1443324573)) from `pallet_balances`, and its `Holds` are now bounded to `RuntimeHoldReason::VARIANT_COUNT`. Therefore, there is no need to let the runtime specify `MaxHolds`. ## For reviewers Relevant changes can be found here: - `substrate/frame/support/procedural/src/lib.rs` - `substrate/frame/support/procedural/src/pallet/parse/composite.rs` - `substrate/frame/support/procedural/src/pallet/expand/composite.rs` - `substrate/frame/support/procedural/src/construct_runtime/expand/composite_helper.rs` - `substrate/frame/support/procedural/src/construct_runtime/expand/hold_reason.rs` - `substrate/frame/support/procedural/src/construct_runtime/expand/freeze_reason.rs` - `substrate/frame/support/src/traits/misc.rs` And the rest of the files is just about removed `MaxHolds` from `pallet_balances` ## Next steps Do the same for `MaxFreezes` https://github.com/paritytech/polkadot-sdk/issues/2997. --------- Co-authored-by: command-bot <> Co-authored-by:
Bastian Köcher <[email protected]> Co-authored-by:
Dónal Murray <[email protected]> Co-authored-by:
gupnik <[email protected]>
-
- Jan 26, 2024
-
-
Liam Aharon authoredRelated https://github.com/paritytech/polkadot-sdk/issues/3032 --- Using https://github.com/liamaharon/cargo-workspace-version-tools/ `cargo run -- sync --path ../polkadot-sdk` --------- Signed-off-by:
-
- Jan 24, 2024
-
-
dependabot[bot] authored
Bumps [arbitrary](https://github.com/rust-fuzz/arbitrary) from 1.3.0 to 1.3.2. <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/rust-fuzz/arbitrary/blob/main/CHANGELOG.md">arbitrary's changelog</a>.</em></p> <blockquote> <h2>1.3.2</h2> <p>Released 2023-10-30.</p> <h3>Added</h3> <ul> <li>Added <code>Arbitrary</code> implementations for <code>Arc<[T]></code> and <code>Rc<[T]></code>. <a href="https://redirect.github.com/rust-fuzz/arbitrary/pull/160">#160</a></li> </ul> <hr /> <h2>1.3.1</h2> <p>Released 2023-10-11.</p> <h3>Fixed</h3> <ul> <li>Fixed an issue with generating collections of collections in <code>arbitrary_take_rest</code> where <code><Vec<Vec<u8>>>::arbitrary_take_rest</code> would never generate <code>vec![vec![]]</code> for example. See <a href="https://redirect.github.com/rust-fuzz/arbitrary/pull/159">#159</a> for details.</li> </ul> <hr /> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/rust-fuzz/arbitrary/commit/66e75c5bf57275d400d3ebc746e0cee4f6ff9596"><code>66e75c5</code></a> Bump to version 1.3.1</li> <li><a href="https://github.com/rust-fuzz/arbitrary/commit/04054dfa1a0f07b233db0581c2d61615df737ade"><code>04054df</code></a> Merge pull request <a href="https://redirect.github.com/rust-fuzz/arbitrary/issues/160">#160</a> from kpreid/arcslice</li> <li><a href="https://github.com/rust-fuzz/arbitrary/commit/ef5dff63e4f3079acc6455445f0a8080d4857813"><code>ef5dff6</code></a> Implement <code>Arbitrary</code> for <code>Arc\<[A]></code> and <code>Rc\<[A]></code>.</li> <li><a href="https://github.com/rust-fuzz/arbitrary/commit/b3e8342ea8dc8437aff3d3a1f5b95b7c02bf57f5"><code>b3e8342</code></a> Bump to version 1.3.1</li> <li><a href="https://github.com/rust-fuzz/arbitrary/commit/c1fa740bb777940bda77a4154d035805b4ecce5b"><code>c1fa740</code></a> Merge pull request <a href="https://redirect.github.com/rust-fuzz/arbitrary/issues/159">#159</a> from fitzgen/arbitrary-take-rest-and-collections-of-c...</li> <li><a href="https://github.com/rust-fuzz/arbitrary/commit/f19fd7a512fe953e902954d01fe046475d8f01a7"><code>f19fd7a</code></a> Add clippy allow for existing code running afoul of new clippy lint</li> <li><a href="https://github.com/rust-fuzz/arbitrary/commit/27560f182b5f0feb8dbd70791cbadd6fbd622411"><code>27560f1</code></a> Fix <code>Unstructured::arbitrary_take_rest_iter</code> for collections of collections</li> <li><a href="https://github.com/rust-fuzz/arbitrary/commit/80d6bfe5e8c864a05ed8c1f0a107bca632ea8c61"><code>80d6bfe</code></a> Merge pull request <a href="https://redirect.github.com/rust-fuzz/arbitrary/issues/157">#157</a> from jyn514/ip-addr</li> <li><a href="https://github.com/rust-fuzz/arbitrary/commit/7d3364edb6a39554c4b97f0d0548289f001121fe"><code>7d3364e</code></a> impl Arbitrary for IpAddr</li> <li><a href="https://github.com/rust-fuzz/arbitrary/commit/0bdbec8a9fdf19a18e6cb8ffe4022b9a6a588cf2"><code>0bdbec8</code></a> Merge pull request <a href="https://redirect.github.com/rust-fuzz/arbitrary/issues/151">#151</a> from Ekleog-NEAR/patch-2</li> <li>Additional commits viewable in <a href="https://github.com/rust-fuzz/arbitrary/compare/v1.3.0...v1.3.2">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by:
dependabot[bot] <[email protected]> Co-authored-by:
dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
-
Just van Stam authored
Moved from: https://github.com/paritytech/polkadot/pull/6951 closes https://github.com/paritytech/polkadot-sdk/issues/490 - [x] update cumulus --- This PR introduces transactional processing of certain xcm instructions. For the list of instructions checkout https://github.com/paritytech/polkadot-sdk/issues/490. The transactional processing is implemented as an xcm-executor config item. The two implementations in this PR are `FrameTransactionalProcessor` and `()`. The `()` implementation does no transactional processing. Each implementation of the `ProcessTransaction` trait has an `IS_TRANSACTIONAL` const that tells the XCVM if transactional processing is actually implemented. If Transactional processing is implemented, changes to touched registers should also be rolled back to prevent inconsistencies. Note for reviewers: Check out the following safety assumption: https://github.com/paritytech/polkadot-sdk/pull/1222/files#diff-4effad7d8c1c9de19fd27e18661cbf2128c8718f3b2420a27d2f816e0749ea53R30 --------- Co-authored-by:
Keith Yeung <[email protected]> Co-authored-by:
-
- Jan 22, 2024
-
-
joe petrowski authored
Clean up all the old syntax. --------- Co-authored-by: command-bot <> Co-authored-by:
Nikhil Gupta <[email protected]> Co-authored-by:
Maksym H <[email protected]>
-
- Jan 18, 2024
-
-
Tsvetomir Dimitrov authored
Backport of https://github.com/paritytech/polkadot-sdk/pull/1863 to master Extend candidate sanitation in paras_inherent by removing backing votes from disabled validators. Check https://github.com/paritytech/polkadot-sdk/issues/1592 for more details. This change is related to the disabling strategy implementation (https://github.com/paritytech/polkadot-sdk/pull/2226). --------- Co-authored-by:
ordian <[email protected]> Co-authored-by:
ordian <[email protected]> Co-authored-by:
Maciej <[email protected]>
-
- Jan 16, 2024
-
-
Francisco Aguirre authored
# Note for reviewer Most changes are just syntax changes necessary for the new version. Most important files should be the ones under the `xcm` folder. # Description Added XCMv4. ## Removed `Multi` prefix The following types have been renamed: - MultiLocation -> Location - MultiAsset -> Asset - MultiAssets -> Assets - InteriorMultiLocation -> InteriorLocation - MultiAssetFilter -> AssetFilter - VersionedMultiAsset -> VersionedAsset - WildMultiAsset -> WildAsset - VersionedMultiLocation -> VersionedLocation In order to fix a name conflict, the `Assets` in `xcm-executor` were renamed to `HoldingAssets`, as they represent assets in holding. ## Removed `Abstract` asset id It was not being used anywhere and this simplifies the code. Now assets are just constructed as follows: ```rust let asset: Asset = (AssetId(Location::new(1, Here)), 100u128).into(); ``` No need for specifying `Concrete` anymore. ## Outcome is now a named fields struct Instead of ```rust pub enum Outcome { Complete(Weight), Incomplete(Weight, Error), Error(Error), } ``` we now have ```rust pub enum Outcome { Complete { used: Weight }, Incomplete { used: Weight, error: Error }, Error { error: Error }, } ``` ## Added Reanchorable trait Now both locations and assets implement this trait, making it easier to reanchor both. ## New syntax for building locations and junctions Now junctions are built using the following methods: ```rust let location = Location { parents: 1, interior: [Parachain(1000), PalletInstance(50), GeneralIndex(1984)].into() }; ``` or ```rust let location = Location::new(1, [Parachain(1000), PalletInstance(50), GeneralIndex(1984)]); ``` And they are matched like so: ```rust match location.unpack() { (1, [Parachain(id)]) => ... (0, Here) => ..., (1, [_]) => ..., } ``` This syntax is mandatory in v4, and has been also implemented for v2 and v3 for easier migration. This was needed to make all sizes smaller. # TODO - [x] Scaffold v4 - [x] Port github.com/paritytech/polkadot/pull/7236 - [x] Remove `Multi` prefix - [x] Remove `Abstract` asset id --------- Co-authored-by: command-bot <> Co-authored-by:
-
- Dec 20, 2023
-
-
Dónal Murray authored
Many clippy lints usually enforced by `-Dcomplexity` and `-Dcorrectness` are not caught by CI as they are gated by `features`, like `runtime-benchmarks`, while the clippy CI job runs with only the default features for all targets. This PR also adds a CI step to run clippy with `--all-features` to ensure the code quality is maintained behind feature gates from now on. To improve local development, clippy lints are downgraded to warnings, but they still will result in an error at CI due to the `-Dwarnings` rustflag. --------- Co-authored-by:Liam Aharon <[email protected]>
-
- Dec 14, 2023
-
-
Francisco Aguirre authored
In the move from the old `Currency` traits to the new `fungible/s` family of traits, we already had the `FungiblesAdapter` and `NonFungiblesAdapter` for multiple fungible and non fungible assets respectively. However, for handling only one fungible asset, we were missing a `FungibleAdapter`, and so used the old `CurrencyAdapter` instead. This PR aims to fill in that gap, and provide the new adapter for more updated examples. I marked the old `CurrencyAdapter` as deprecated as part of this PR, and I'll change it to the new `FungibleAdapter` in a following PR. The two stages are separated so as to not bloat this PR with some name fixes in tests. --------- Co-authored-by: command-bot <>
-
- Dec 13, 2023
-
-
Squirrel authored
We currently use a bit of a hack in `.cargo/config` to make sure that clippy isn't too annoying by specifying the list of lints. There is now a stable way to define lints for a workspace. The only down side is that every crate seems to have to opt into this so there's a *few* files modified in this PR. Dependencies: - [x] PR that upgrades CI to use rust 1.74 is merged. --------- Co-authored-by:
joe petrowski <[email protected]> Co-authored-by:
Branislav Kontur <[email protected]> Co-authored-by:
-
- Nov 28, 2023
-
-
gupnik authored
Step in https://github.com/paritytech/polkadot-sdk/issues/171 This PR adds `derive_impl` on all `frame_system` config impls for mock runtimes. The overridden configs are maintained as of now to ensure minimal changes. --------- Co-authored-by:
-
- Nov 21, 2023
-
-
Francisco Aguirre authored
Adding on top of the new builder pattern for creating XCM programs, I'm adding some more APIs: ```rust let paying_fees: Xcm<()> = Xcm::builder() // Only allow paying for fees .withdraw_asset() // First instruction has to load the holding register .buy_execution() // Second instruction has to be `buy_execution` .build(); let paying_fees_invalid: Xcm<()> = Xcm::builder() .withdraw_asset() .build(); // Invalid, need to pay for fees let not_paying_fees: Xcm<()> = Xcm::builder_unpaid() .unpaid_execution() // Needed .withdraw_asset() .deposit_asset() .build(); let all_goes: Xcm<()> = Xcm::builder_unsafe() // You can do anything .withdraw_asset() .deposit_asset() .build(); ``` The invalid bits are because the methods don't even exist on the types that you'd want to call them on. --------- Co-authored-by: command-bot <>
-
- Nov 13, 2023
-
-
Adrian Catangiu authored
## Motivation `pallet-xcm` is the main user-facing interface for XCM functionality, including assets manipulation functions like `teleportAssets()` and `reserve_transfer_assets()` calls. While `teleportAsset()` works both ways, `reserve_transfer_assets()` works only for sending reserve-based assets to a remote destination and beneficiary when the reserve is the _local chain_. ## Solution This PR enhances `pallet_xcm::(limited_)reserve_withdraw_assets` to support transfers when reserves are other chains. This will allow complete, **bi-directional** reserve-based asset transfers user stories using `pallet-xcm`. Enables following scenarios: - transferring assets with local reserve (was previously supported iff asset used as fee also had local reserve - now it works in all cases), - transferring assets with reserve on destination, - transferring assets with reserve on remote/third-party chain (iff assets and fees have same remote reserve), - transferring assets with reserve different than the reserve of the asset to be used as fees - meaning can be used to transfer random asset with local/dest reserve while using DOT for fees on all involved chains, even if DOT local/dest reserve doesn't match asset reserve, - transferring assets with any type of local/dest reserve while using fees which can be teleported between involved chains. All of the above is done by pallet inner logic without the user having to specify which scenario/reserves/teleports/etc. The correct scenario and corresponding XCM programs are identified, and respectively, built automatically based on runtime configuration of trusted teleporters and trusted reserves. #### Current limitations: - while `fees` and "non-fee" `assets` CAN have different reserves (or fees CAN be teleported), the remaining "non-fee" `assets` CANNOT, among themselves, have different reserve locations (this is also implicitly enforced by `MAX_ASSETS_FOR_TRANSFER=2`, but this can be safely increased in the future). - `fees` and "non-fee" `assets` CANNOT have **different remote** reserves (this could also be supported in the future, but adds even more complexity while possibly not being worth it - we'll see what the future holds). Fixes https://github.com/paritytech/polkadot-sdk/issues/1584 Fixes https://github.com/paritytech/polkadot-sdk/issues/2055 --------- Co-authored-by:
-
- Nov 08, 2023
-
-
Francisco Aguirre authored
Added a proc macro to be able to write XCMs using the builder pattern. This means we go from having to do this: ```rust let message: Xcm<()> = Xcm(vec![ WithdrawAsset(assets), BuyExecution { fees: asset, weight_limit: Unlimited }, DepositAsset { assets, beneficiary }, ]); ``` to this: ```rust let message: Xcm<()> = Xcm::builder() .withdraw_asset(assets) .buy_execution(asset, Unlimited), .deposit_asset(assets, beneficiary) .build(); ``` --------- Co-authored-by:
-
- Oct 24, 2023
-
-
Kian Paimani authored
closes https://github.com/paritytech/polkadot-sdk/issues/1882 ## Breaking Changes This PR introduces a new item to `pallet_balances::Config`: ```diff trait Config { ++ type RuntimeFreezeReasons; } ``` This value is only used to check it against `type MaxFreeze`. A similar check has been added for `MaxHolds` against `RuntimeHoldReasons`, which is already given to `pallet_balances`. In all contexts, you should pass the real `RuntimeFreezeReasons` generated by `construct_runtime` to `type RuntimeFreezeReasons`. Passing `()` would also work, but it would imply that the runtime uses no freezes at all. --------- Signed-off-by:
-
- Oct 20, 2023
-
-
Bastian Köcher authored
The `xcm` crate was renamed to `staging-xcm` to be able to publish it to crates.io as someone as squatted `xcm`. The problem with this rename is that the `TypeInfo` includes the crate name which ultimately lands in the metadata. The metadata is consumed by downstream users like `polkadot-js` or people building on top of `polkadot-js`. These people are using the entire `path` to find the type in the type registry. Thus, their code would break as the type path would now be [`staging_xcm`, `VersionedXcm`] instead of [`xcm`, `VersionedXcm`]. This pull request fixes this by renaming the path segment `staging_xcm` to `xcm`. This requires: https://github.com/paritytech/scale-info/pull/197 --------- Co-authored-by:
-
- Sep 04, 2023
-
-
Chevdor authored
* Add markdown linting - add linter default rules - adapt rules to current code - fix the code for linting to pass - add CI check fix #1243 * Fix markdown for Substrate * Fix tooling install * Fix workflow * Add documentation * Remove trailing spaces * Update .github/.markdownlint.yaml Co-authored-by:
-
- Sep 01, 2023
-
-
gupnik authored
Co-authored-by:Javier Viola <[email protected]>
-
- Aug 31, 2023
-
-
Bastian Köcher authored
* Rename `polkadot-parachain` to `polkadot-parachain-primitives` While doing this it also fixes some last `rustdoc` issues and fixes another Cargo warning related to `pallet-paged-list`. * Fix compilation * ".git/.scripts/commands/fmt/fmt.sh" * Fix XCM docs --------- Co-authored-by: command-bot <>
-
- Aug 30, 2023
-
-
Lulu authored
* Rename squatted crates This commit adds the staging- prefix to squatted crates so we can go forward and publish them to crates.io. Using the staging- prefix is a temp fix until we decide on replacement names. https://forum.parity.io/t/renaming-squated-crates-in-substrate-polkadot-cumulus/1964/6 * Fix test after crate renames * Update Lockfile
-
- Aug 29, 2023
-
-
Lulu authored
* Set test crates to nopublish * Don't publish more crates * Set even more crates to nopublish --------- Co-authored-by: -
Oliver Tale-Yazdi authored
* Fix build profiles Closes https://github.com/paritytech/polkadot-sdk/issues/1155 Signed-off-by:
-
- Aug 28, 2023
-
-
Oliver Tale-Yazdi authored
* Manually fix conflicting ? Signed-off-by:
🤦 Signed-off-by:
-
- Aug 25, 2023
-
-
Alexander Samusev authored
* Add CI for monorepo * fix frame tests * Format features Signed-off-by:
-
Alexander authoredSigned-off-by:alvicsam <[email protected]>
-
- Aug 23, 2023
-
-
juangirini authored
* move RuntimeDebug out of frame_support * move RuntimeDebug out of frame_support * fix xcm export * ".git/.scripts/commands/fmt/fmt.sh" * fix xcm intefration tests * fix cargo lock for xcm intefration tests * wip * restructure benchmarking macro related exports * update cargo lock --------- Co-authored-by: parity-processbot <>
-
- Aug 16, 2023
-
-
Oliver Tale-Yazdi authored
* Fix clippy check Signed-off-by:
😌 Signed-off-by:
-
- Aug 14, 2023
-
-
Oliver Tale-Yazdi authored
* Use same rustfmt.toml as Substrate Signed-off-by:
Tsvetomir Dimitrov <[email protected]> * Update node/core/pvf/src/error.rs Co-authored-by:
-
- Aug 04, 2023
-
-
Lulu authored
* Add license to crates This is required to publish to crates.io * Add more licenses
-
- Jul 14, 2023
-
-
juangirini authored
* replace Index for Nonce * remove extra Nonce * update lockfile for {"substrate"} --------- Co-authored-by: parity-processbot <>
-
- Jul 13, 2023
-
-
gupnik authored
Moves `Block` to `frame_system` instead of `construct_runtime` and removes `Header` and `BlockNumber` (#7431) * Companion for substrate * Minor update * Formatting * Fixes for cumulus * Fixes tests in polkadot-runtime-parachains * Minor update * Removes unused import * Fixes tests in polkadot-runtime-common * Minor fix * Update roadmap/implementers-guide/src/runtime/configuration.md Co-authored-by:
-
- Jul 12, 2023
-
-
Michal Kucharczyk authored* GenesisBuild<T,I> deprecated. BuildGenesisConfig added * fmt * fixes * more fixes * more fixes * fixes * update lockfile for {"substrate"} * fix --------- Co-authored-by: parity-processbot <>
-
- Jun 28, 2023
-
-
Oliver Tale-Yazdi authored
* Increase recusive limit to 512 for macro expansions Signed-off-by:
Alexandru Vasile <[email protected]> * Increase limit to 1024 Signed-off-by:
-
- Jun 21, 2023
-
-
Koute authored
-
- Jun 05, 2023
-
-
Keith Yeung authored
* Implement AliasOrigin processing in XCVM * add builder types and first test * switch to more general builder types * clone target for RemovePrefixAccountId32 * change builder types * change AliasForeignAccountId32 and add test for AliasCase * add Aliasers type to xcm configs * add benchmark * benchmark fix * add benchmark function for runtimes * fix alias_origin result types * fix benchmark test * add runtime-benchmarks feature in pallet-xcm-benchmarks * fmt * remove AliasCase, add test and fmt * address feedback * ".git/.scripts/commands/bench/bench.sh" xcm kusama pallet_xcm_benchmarks::generic * ".git/.scripts/commands/bench/bench.sh" xcm westend pallet_xcm_benchmarks::generic * ".git/.scripts/commands/bench/bench.sh" xcm rococo pallet_xcm_benchmarks::generic * address feedback * lock * ".git/.scripts/commands/bench/bench.sh" xcm kusama pallet_xcm_benchmarks::generic * ".git/.scripts/commands/bench/bench.sh" xcm westend pallet_xcm_benchmarks::generic * ".git/.scripts/commands/bench/bench.sh" xcm rococo pallet_xcm_benchmarks::generic * change doc * fmt --------- Co-authored-by:
Just van Stam <[email protected]> Co-authored-by:
Just van Stam <[email protected]> Co-authored-by: command-bot <>
-
Gavin Wood authored
* Introduce an extensible location-to-hash-account * Convert becomes RevFallRefConvert * Use ConvertLocation trait * Remove Convert usage * Builds * Fix warnings * Remove unused types * Bump lock * No need for aliasing * Remove unused * Deprecate legacy conversion * Fixes * Fixes * Update Cargo.toml Co-authored-by:
Muharem Ismailov <[email protected]> * Update xcm/xcm-builder/src/location_conversion.rs Co-authored-by:
-
- May 26, 2023
-
-
Francisco Aguirre authored
* XCM: Fix issue with RequestUnlock * Leave API changes for v4 * Fix clippy errors * Fix tests --------- Co-authored-by: parity-processbot <>
-
![dependabot[bot]'s avatar](https://secure.gravatar.com/avatar/bd5a8d6c673b738d52b0ac42a110045f3f964b3ebfc1d60ea805af743b1dc0e6?s=80&d=identicon "dependabot[bot]")
