## Basic example showcasing a migration using the MBM framework

This PR has been built on top of
https://github.com/paritytech/polkadot-sdk/pull/1781

 and adds two new
example crates to the `examples` pallet

### Changes Made:

Added the `pallet-example-mbm` crate: This crate provides a minimal
example of a pallet that uses MBM. It showcases a storage migration
where values are migrated from a `u32` to a `u64`.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>

This will make it possible to use remaining weight on idle for
processing enqueued messages.
More context here https://github.com/paritytech/polkadot-sdk/issues/3709



---------

Co-authored-by: Adrian Catangiu <[email protected]>

Part of #3326 

cc @Kianenigma @ggwpez @liamaharon

 

polkadot address: 12poSUQPtcF1HUPQGY3zZu2P8emuW9YnsPduA4XG3oCEfJVp

---------

Signed-off-by: Matteo Muraca <[email protected]>

Step in https://github.com/paritytech/polkadot-sdk/issues/171

This PR removes `as [disambiguation_path]` syntax from `derive_impl`
usage across the polkadot-sdk as introduced in
https://github.com/paritytech/polkadot-sdk/pull/3505

Revert "FRAME: Create `TransactionExtension` as a replacement for `SignedExtension` (#2280)" (#3665)

This PR reverts #2280 which introduced `TransactionExtension` to replace
`SignedExtension`.

As a result of the discussion
[here](https://github.com/paritytech/polkadot-sdk/pull/3623#issuecomment-1986789700

),
the changes will be reverted for now with plans to reintroduce the
concept in the future.

---------

Signed-off-by: georgepisaltu <[email protected]>

Moved from https://github.com/paritytech/substrate/pull/14788

----

Fixes https://github.com/paritytech/polkadot-sdk/issues/232

This PR introduces outer-macro approach for `construct_runtime` as
discussed in the linked issue. It looks like the following:
```rust
#[frame_support::runtime]
mod runtime {
	#[runtime::runtime]
        #[runtime::derive(
		RuntimeCall,
		RuntimeEvent,
		RuntimeError,
		RuntimeOrigin,
		RuntimeFreezeReason,
		RuntimeHoldReason,
		RuntimeSlashReason,
		RuntimeLockId,
                RuntimeTask,
	)]
	pub struct Runtime;

	#[runtime::pallet_index(0)]
	pub type System = frame_system;

	#[runtime::pallet_index(1)]
	pub type Timestamp = pallet_timestamp;

	#[runtime::pallet_index(2)]
	pub type Aura = pallet_aura;

	#[runtime::pallet_index(3)]
	pub type Grandpa = pallet_grandpa;

	#[runtime::pallet_index(4)]
	pub type Balances = pallet_balances;

	#[runtime::pallet_index(5)]
	pub type TransactionPayment = pallet_transaction_payment;

	#[runtime::pallet_index(6)]
	pub type Sudo = pallet_sudo;

	// Include the custom logic from the pallet-template in the runtime.
	#[runtime::pallet_index(7)]
	pub type TemplateModule = pallet_template;
}
```

## Features
- `#[runtime::runtime]` attached to a struct defines the main runtime
- `#[runtime::derive]` attached to this struct defines the types
generated by runtime
- `#[runtime::pallet_index]` must be attached to a pallet to define its
index
- `#[runtime::disable_call]` can be optionally attached to a pallet to
disable its calls
- `#[runtime::disable_unsigned]` can be optionally attached to a pallet
to disable unsigned calls
- A pallet instance can be defined as `TemplateModule:
pallet_template<Instance>`
- An optional attribute can be defined as
`#[frame_support::runtime(legacy_ordering)]` to ensure that the order of
hooks is same as the order of pallets (and not based on the
pallet_index). This is to support legacy runtimes and should be avoided
for new ones.

## Todo
- [x] Update the latest syntax in kitchensink and tests
- [x] Update UI tests
- [x] Docs

## Extension
- Abstract away the Executive similar to
https://github.com/paritytech/substrate/pull/14742


- Optionally avoid the need to specify all runtime types (TBD)

---------

Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Nikhil Gupta <>

Closes: #3196

---------

Co-authored-by: Alexander Theißen <[email protected]>
Co-authored-by: PG Herveou <[email protected]>

Closes #2160

First part of [Extrinsic
Horizon](https://github.com/paritytech/polkadot-sdk/issues/2415

)

Introduces a new trait `TransactionExtension` to replace
`SignedExtension`. Introduce the idea of transactions which obey the
runtime's extensions and have according Extension data (né Extra data)
yet do not have hard-coded signatures.

Deprecate the terminology of "Unsigned" when used for
transactions/extrinsics owing to there now being "proper" unsigned
transactions which obey the extension framework and "old-style" unsigned
which do not. Instead we have __*General*__ for the former and
__*Bare*__ for the latter. (Ultimately, the latter will be phased out as
a type of transaction, and Bare will only be used for Inherents.)

Types of extrinsic are now therefore:
- Bare (no hardcoded signature, no Extra data; used to be known as
"Unsigned")
- Bare transactions (deprecated): Gossiped, validated with
`ValidateUnsigned` (deprecated) and the `_bare_compat` bits of
`TransactionExtension` (deprecated).
  - Inherents: Not gossiped, validated with `ProvideInherent`.
- Extended (Extra data): Gossiped, validated via `TransactionExtension`.
  - Signed transactions (with a hardcoded signature).
  - General transactions (without a hardcoded signature).

`TransactionExtension` differs from `SignedExtension` because:
- A signature on the underlying transaction may validly not be present.
- It may alter the origin during validation.
- `pre_dispatch` is renamed to `prepare` and need not contain the checks
present in `validate`.
- `validate` and `prepare` is passed an `Origin` rather than a
`AccountId`.
- `validate` may pass arbitrary information into `prepare` via a new
user-specifiable type `Val`.
- `AdditionalSigned`/`additional_signed` is renamed to
`Implicit`/`implicit`. It is encoded *for the entire transaction* and
passed in to each extension as a new argument to `validate`. This
facilitates the ability of extensions to acts as underlying crypto.

There is a new `DispatchTransaction` trait which contains only default
function impls and is impl'ed for any `TransactionExtension` impler. It
provides several utility functions which reduce some of the tedium from
using `TransactionExtension` (indeed, none of its regular functions
should now need to be called directly).

Three transaction version discriminator ("versions") are now
permissible:
- 0b000000100: Bare (used to be called "Unsigned"): contains Signature
or Extra (extension data). After bare transactions are no longer
supported, this will strictly identify an Inherents only.
- 0b100000100: Old-school "Signed" Transaction: contains Signature and
Extra (extension data).
- 0b010000100: New-school "General" Transaction: contains Extra
(extension data), but no Signature.

For the New-school General Transaction, it becomes trivial for authors
to publish extensions to the mechanism for authorizing an Origin, e.g.
through new kinds of key-signing schemes, ZK proofs, pallet state,
mutations over pre-authenticated origins or any combination of the
above.

## Code Migration

### NOW: Getting it to build

Wrap your `SignedExtension`s in `AsTransactionExtension`. This should be
accompanied by renaming your aggregate type in line with the new
terminology. E.g. Before:

```rust
/// The SignedExtension to the basic transaction logic.
pub type SignedExtra = (
	/* snip */
	MySpecialSignedExtension,
);
/// Unchecked extrinsic type as expected by this runtime.
pub type UncheckedExtrinsic =
	generic::UncheckedExtrinsic<Address, RuntimeCall, Signature, SignedExtra>;
```

After:

```rust
/// The extension to the basic transaction logic.
pub type TxExtension = (
	/* snip */
	AsTransactionExtension<MySpecialSignedExtension>,
);
/// Unchecked extrinsic type as expected by this runtime.
pub type UncheckedExtrinsic =
	generic::UncheckedExtrinsic<Address, RuntimeCall, Signature, TxExtension>;
```

You'll also need to alter any transaction building logic to add a
`.into()` to make the conversion happen. E.g. Before:

```rust
fn construct_extrinsic(
		/* snip */
) -> UncheckedExtrinsic {
	let extra: SignedExtra = (
		/* snip */
		MySpecialSignedExtension::new(/* snip */),
	);
	let payload = SignedPayload::new(call.clone(), extra.clone()).unwrap();
	let signature = payload.using_encoded(|e| sender.sign(e));
	UncheckedExtrinsic::new_signed(
		/* snip */
		Signature::Sr25519(signature),
		extra,
	)
}
```

After:

```rust
fn construct_extrinsic(
		/* snip */
) -> UncheckedExtrinsic {
	let tx_ext: TxExtension = (
		/* snip */
		MySpecialSignedExtension::new(/* snip */).into(),
	);
	let payload = SignedPayload::new(call.clone(), tx_ext.clone()).unwrap();
	let signature = payload.using_encoded(|e| sender.sign(e));
	UncheckedExtrinsic::new_signed(
		/* snip */
		Signature::Sr25519(signature),
		tx_ext,
	)
}
```

### SOON: Migrating to `TransactionExtension`

Most `SignedExtension`s can be trivially converted to become a
`TransactionExtension`. There are a few things to know.

- Instead of a single trait like `SignedExtension`, you should now
implement two traits individually: `TransactionExtensionBase` and
`TransactionExtension`.
- Weights are now a thing and must be provided via the new function `fn
weight`.

#### `TransactionExtensionBase`

This trait takes care of anything which is not dependent on types
specific to your runtime, most notably `Call`.

- `AdditionalSigned`/`additional_signed` is renamed to
`Implicit`/`implicit`.
- Weight must be returned by implementing the `weight` function. If your
extension is associated with a pallet, you'll probably want to do this
via the pallet's existing benchmarking infrastructure.

#### `TransactionExtension`

Generally:
- `pre_dispatch` is now `prepare` and you *should not reexecute the
`validate` functionality in there*!
- You don't get an account ID any more; you get an origin instead. If
you need to presume an account ID, then you can use the trait function
`AsSystemOriginSigner::as_system_origin_signer`.
- You get an additional ticket, similar to `Pre`, called `Val`. This
defines data which is passed from `validate` into `prepare`. This is
important since you should not be duplicating logic from `validate` to
`prepare`, you need a way of passing your working from the former into
the latter. This is it.
- This trait takes two type parameters: `Call` and `Context`. `Call` is
the runtime call type which used to be an associated type; you can just
move it to become a type parameter for your trait impl. `Context` is not
currently used and you can safely implement over it as an unbounded
type.
- There's no `AccountId` associated type any more. Just remove it.

Regarding `validate`:
- You get three new parameters in `validate`; all can be ignored when
migrating from `SignedExtension`.
- `validate` returns a tuple on success; the second item in the tuple is
the new ticket type `Self::Val` which gets passed in to `prepare`. If
you use any information extracted during `validate` (off-chain and
on-chain, non-mutating) in `prepare` (on-chain, mutating) then you can
pass it through with this. For the tuple's last item, just return the
`origin` argument.

Regarding `prepare`:
- This is renamed from `pre_dispatch`, but there is one change:
- FUNCTIONALITY TO VALIDATE THE TRANSACTION NEED NOT BE DUPLICATED FROM
`validate`!!
- (This is different to `SignedExtension` which was required to run the
same checks in `pre_dispatch` as in `validate`.)

Regarding `post_dispatch`:
- Since there are no unsigned transactions handled by
`TransactionExtension`, `Pre` is always defined, so the first parameter
is `Self::Pre` rather than `Option<Self::Pre>`.

If you make use of `SignedExtension::validate_unsigned` or
`SignedExtension::pre_dispatch_unsigned`, then:
- Just use the regular versions of these functions instead.
- Have your logic execute in the case that the `origin` is `None`.
- Ensure your transaction creation logic creates a General Transaction
rather than a Bare Transaction; this means having to include all
`TransactionExtension`s' data.
- `ValidateUnsigned` can still be used (for now) if you need to be able
to construct transactions which contain none of the extension data,
however these will be phased out in stage 2 of the Transactions Horizon,
so you should consider moving to an extension-centric design.

## TODO

- [x] Introduce `CheckSignature` impl of `TransactionExtension` to
ensure it's possible to have crypto be done wholly in a
`TransactionExtension`.
- [x] Deprecate `SignedExtension` and move all uses in codebase to
`TransactionExtension`.
  - [x] `ChargeTransactionPayment`
  - [x] `DummyExtension`
  - [x] `ChargeAssetTxPayment` (asset-tx-payment)
  - [x] `ChargeAssetTxPayment` (asset-conversion-tx-payment)
  - [x] `CheckWeight`
  - [x] `CheckTxVersion`
  - [x] `CheckSpecVersion`
  - [x] `CheckNonce`
  - [x] `CheckNonZeroSender`
  - [x] `CheckMortality`
  - [x] `CheckGenesis`
  - [x] `CheckOnlySudoAccount`
  - [x] `WatchDummy`
  - [x] `PrevalidateAttests`
  - [x] `GenericSignedExtension`
  - [x] `SignedExtension` (chain-polkadot-bulletin)
  - [x] `RefundSignedExtensionAdapter`
- [x] Implement `fn weight` across the board.
- [ ] Go through all pre-existing extensions which assume an account
signer and explicitly handle the possibility of another kind of origin.
- [x] `CheckNonce` should probably succeed in the case of a non-account
origin.
- [x] `CheckNonZeroSender` should succeed in the case of a non-account
origin.
- [x] `ChargeTransactionPayment` and family should fail in the case of a
non-account origin.
  - [ ] 
- [x] Fix any broken tests.

---------

Signed-off-by: georgepisaltu <[email protected]>
Signed-off-by: Alexandru Vasile <[email protected]>
Signed-off-by: dependabot[bot] <[email protected]>
Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Signed-off-by: Alexandru Gheorghe <[email protected]>
Signed-off-by: Andrei Sandu <[email protected]>
Co-authored-by: Nikhil Gupta <[email protected]>
Co-authored-by: georgepisaltu <[email protected]>
Co-authored-by: Chevdor <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Maciej <[email protected]>
Co-authored-by: Javier Viola <[email protected]>
Co-authored-by: Marcin S. <[email protected]>
Co-authored-by: Tsvetomir Dimitrov <[email protected]>
Co-authored-by: Javier Bullrich <[email protected]>
Co-authored-by: Koute <[email protected]>
Co-authored-by: Adrian Catangiu <[email protected]>
Co-authored-by: Vladimir Istyufeev <[email protected]>
Co-authored-by: Ross Bulat <[email protected]>
Co-authored-by: Gonçalo Pestana <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Svyatoslav Nikolsky <[email protected]>
Co-authored-by: André Silva <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: s0me0ne-unkn0wn <[email protected]>
Co-authored-by: ordian <[email protected]>
Co-authored-by: Sebastian Kunert <[email protected]>
Co-authored-by: Aaro Altonen <[email protected]>
Co-authored-by: Dmitry Markin <[email protected]>
Co-authored-by: Alexandru Vasile <[email protected]>
Co-authored-by: Alexander Samusev <[email protected]>
Co-authored-by: Julian Eager <[email protected]>
Co-authored-by: Michal Kucharczyk <[email protected]>
Co-authored-by: Davide Galassi <[email protected]>
Co-authored-by: Dónal Murray <[email protected]>
Co-authored-by: yjh <[email protected]>
Co-authored-by: Tom Mi <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Will | Paradox | ParaNodes.io <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Joshy Orndorff <[email protected]>
Co-authored-by: Joshy Orndorff <[email protected]>
Co-authored-by: PG Herveou <[email protected]>
Co-authored-by: Alexander Theißen <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: Juan Girini <[email protected]>
Co-authored-by: bader y <[email protected]>
Co-authored-by: James Wilson <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: asynchronous rob <[email protected]>
Co-authored-by: Parth <[email protected]>
Co-authored-by: Andrew Jones <[email protected]>
Co-authored-by: Jonathan Udd <[email protected]>
Co-authored-by: Serban Iorga <[email protected]>
Co-authored-by: Egor_P <[email protected]>
Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: Evgeny Snitko <[email protected]>
Co-authored-by: Just van Stam <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: gupnik <[email protected]>
Co-authored-by: dzmitry-lahoda <[email protected]>
Co-authored-by: zhiqiangxu <[email protected]>
Co-authored-by: Nazar Mokrynskyi <[email protected]>
Co-authored-by: Anwesh <[email protected]>
Co-authored-by: cheme <[email protected]>
Co-authored-by: Sam Johnson <[email protected]>
Co-authored-by: kianenigma <[email protected]>
Co-authored-by: Jegor Sidorenko <[email protected]>
Co-authored-by: Muharem <[email protected]>
Co-authored-by: joepetrowski <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Gabriel Facco de Arruda <[email protected]>
Co-authored-by: Squirrel <[email protected]>
Co-authored-by: Andrei Sandu <[email protected]>
Co-authored-by: georgepisaltu <[email protected]>
Co-authored-by: command-bot <>

This MR is the merge of
https://github.com/paritytech/substrate/pull/14414 and
https://github.com/paritytech/substrate/pull/14275. It implements
[RFC#13](https://github.com/polkadot-fellows/RFCs/pull/13), closes
https://github.com/paritytech/polkadot-sdk/issues/198.

----- 

This Merge request introduces three major topicals:

1. Multi-Block-Migrations
1. New pallet `poll` hook for periodic service work
1. Replacement hooks for `on_initialize` and `on_finalize` in cases
where `poll` cannot be used

and some more general changes to FRAME.  
The changes for each topical span over multiple crates. They are listed
in topical order below.

# 1.) Multi-Block-Migrations

Multi-Block-Migrations are facilitated by creating `pallet_migrations`
and configuring `System::Config::MultiBlockMigrator` to point to it.
Executive picks this up and triggers one step of the migrations pallet
per block.
The chain is in lockdown mode for as long as an MBM is ongoing.
Executive does this by polling `MultiBlockMigrator::ongoing` and not
allowing any transaction in a block, if true.

A MBM is defined through trait `SteppedMigration`. A condensed version
looks like this:
```rust
/// A migration that can proceed in multiple steps.
pub trait SteppedMigration {
	type Cursor: FullCodec + MaxEncodedLen;
	type Identifier: FullCodec + MaxEncodedLen;

	fn id() -> Self::Identifier;

	fn max_steps() -> Option<u32>;

	fn step(
		cursor: Option<Self::Cursor>,
		meter: &mut WeightMeter,
	) -> Result<Option<Self::Cursor>, SteppedMigrationError>;
}
```

`pallet_migrations` can be configured with an aggregated tuple of these
migrations. It then starts to migrate them one-by-one on the next
runtime upgrade.
Two things are important here:
- 1. Doing another runtime upgrade while MBMs are ongoing is not a good
idea and can lead to messed up state.
- 2. **Pallet Migrations MUST BE CONFIGURED IN `System::Config`,
otherwise it is not used.**

The pallet supports an `UpgradeStatusHandler` that can be used to notify
external logic of upgrade start/finish (for example to pause XCM
dispatch).

Error recovery is very limited in the case that a migration errors or
times out (exceeds its `max_steps`). Currently the runtime dev can
decide in `FailedMigrationHandler::failed` how to handle this. One
follow-up would be to pair this with the `SafeMode` pallet and enact
safe mode when an upgrade fails, to allow governance to rescue the
chain. This is currently not possible, since governance is not
`Mandatory`.

## Runtime API

- `Core`: `initialize_block` now returns `ExtrinsicInclusionMode` to
inform the Block Author whether they can push transactions.

### Integration

Add it to your runtime implementation of `Core` and `BlockBuilder`:
```patch
diff --git a/runtime/src/lib.rs b/runtime/src/lib.rs
@@ impl_runtime_apis! {
	impl sp_block_builder::Core<Block> for Runtime {
-		fn initialize_block(header: &<Block as BlockT>::Header) {
+		fn initialize_block(header: &<Block as BlockT>::Header) -> RuntimeExecutiveMode {
			Executive::initialize_block(header)
		}

		...
	}
```

# 2.) `poll` hook

A new pallet hook is introduced: `poll`. `Poll` is intended to replace
mostly all usage of `on_initialize`.
The reason for this is that any code that can be called from
`on_initialize` cannot be migrated through an MBM. Currently there is no
way to statically check this; the implication is to use `on_initialize`
as rarely as possible.
Failing to do so can result in broken storage invariants.

The implementation of the poll hook depends on the `Runtime API` changes
that are explained above.

# 3.) Hard-Deadline callbacks

Three new callbacks are introduced and configured on `System::Config`:
`PreInherents`, `PostInherents` and `PostTransactions`.
These hooks are meant as replacement for `on_initialize` and
`on_finalize` in cases where the code that runs cannot be moved to
`poll`.
The reason for this is to make the usage of HD-code (hard deadline) more
explicit - again to prevent broken invariants by MBMs.

# 4.) FRAME (general changes)

## `frame_system` pallet

A new memorize storage item `InherentsApplied` is added. It is used by
executive to track whether inherents have already been applied.
Executive and can then execute the MBMs directly between inherents and
transactions.

The `Config` gets five new items:
- `SingleBlockMigrations` this is the new way of configuring migrations
that run in a single block. Previously they were defined as last generic
argument of `Executive`. This shift is brings all central configuration
about migrations closer into view of the developer (migrations that are
configured in `Executive` will still work for now but is deprecated).
- `MultiBlockMigrator` this can be configured to an engine that drives
MBMs. One example would be the `pallet_migrations`. Note that this is
only the engine; the exact MBMs are injected into the engine.
- `PreInherents` a callback that executes after `on_initialize` but
before inherents.
- `PostInherents` a callback that executes after all inherents ran
(including MBMs and `poll`).
- `PostTransactions` in symmetry to `PreInherents`, this one is called
before `on_finalize` but after all transactions.

A sane default is to set all of these to `()`. Example diff suitable for
any chain:
```patch
@@ impl frame_system::Config for Test {
 	type MaxConsumers = ConstU32<16>;
+	type SingleBlockMigrations = ();
+	type MultiBlockMigrator = ();
+	type PreInherents = ();
+	type PostInherents = ();
+	type PostTransactions = ();
 }
```

An overview of how the block execution now looks like is here. The same
graph is also in the rust doc.

<details><summary>Block Execution Flow</summary>
<p>

![Screenshot 2023-12-04 at 19 11
29](https://github.com/paritytech/polkadot-sdk/assets/10380170/e88a80c4-ef11-4faa-8df5-8b33a724c054)

</p>
</details> 

## Inherent Order

Moved to https://github.com/paritytech/polkadot-sdk/pull/2154



---------------


## TODO

- [ ] Check that `try-runtime` still works
- [ ] Ensure backwards compatibility with old Runtime APIs
- [x] Consume weight correctly
- [x] Cleanup

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Juan Girini <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Gavin Wood <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

Add a `ApiVersion` constant to the pallet-contracts Config to
communicate with developers the current state of the host functions
exposed by the pallet

This brings functionality to Westend's Coretime Chain runtime, where
previously it was not much more than a shell.

It is assumed that the Coretime pallet will have the same index in the
Westend runtime as it does in Rococo for the runtime calls.

TODO:
- [x] Generate chainspec
- [x] Regenerate weights
- [x] Check hardcoded RuntimeCall weights against relay weights for
transacts

Aura key generation: https://github.com/paritytech/devops/issues/2725



---------

Co-authored-by: command-bot <>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Anton Vilhelm Ásgeirsson <[email protected]>

Closes #169  

Fork of the `orml-parameters-pallet` as introduced by
https://github.com/open-web3-stack/open-runtime-module-library/pull/927


(cc @xlc)
It greatly changes how the macros work, but keeps the pallet the same.
The downside of my code is now that it does only support constant keys
in the form of types, not value-bearing keys.
I think this is an acceptable trade off, give that it can be used by
*any* pallet without any changes.

The pallet allows to dynamically set parameters that can be used in
pallet configs while also restricting the updating on a per-key basis.
The rust-docs contains a complete example.

Changes:
- Add `parameters-pallet`
- Use in the kitchensink as demonstration
- Add experimental attribute to define dynamic params in the runtime.
- Adding a bunch of traits to `frame_support::traits::dynamic_params`
that can be re-used by the ORML macros

## Example

First to define the parameters in the runtime file. The syntax is very
explicit about the codec index and errors if there is no.
```rust
#[dynamic_params(RuntimeParameters, pallet_parameters::Parameters::<Runtime>))]
pub mod dynamic_params {
	use super::*;

	#[dynamic_pallet_params]
	#[codec(index = 0)]
	pub mod storage {
		/// Configures the base deposit of storing some data.
		#[codec(index = 0)]
		pub static BaseDeposit: Balance = 1 * DOLLARS;

		/// Configures the per-byte deposit of storing some data.
		#[codec(index = 1)]
		pub static ByteDeposit: Balance = 1 * CENTS;
	}

	#[dynamic_pallet_params]
	#[codec(index = 1)]
	pub mod contracts {
		#[codec(index = 0)]
		pub static DepositPerItem: Balance = deposit(1, 0);

		#[codec(index = 1)]
		pub static DepositPerByte: Balance = deposit(0, 1);
	}
}
```

Then the pallet is configured with the aggregate:  
```rust
impl pallet_parameters::Config for Runtime {
	type AggregratedKeyValue = RuntimeParameters;
	type AdminOrigin = EnsureRootWithSuccess<AccountId, ConstBool<true>>;
	...
}
```

And then the parameters can be used in a pallet config:
```rust
impl pallet_preimage::Config for Runtime {
	type DepositBase = dynamic_params::storage::DepositBase;
}
```

A custom origin an be defined like this:  
```rust
pub struct DynamicParametersManagerOrigin;

impl EnsureOriginWithArg<RuntimeOrigin, RuntimeParametersKey> for DynamicParametersManagerOrigin {
	type Success = ();

	fn try_origin(
		origin: RuntimeOrigin,
		key: &RuntimeParametersKey,
	) -> Result<Self::Success, RuntimeOrigin> {
		match key {
			RuntimeParametersKey::Storage(_) => {
				frame_system::ensure_root(origin.clone()).map_err(|_| origin)?;
				return Ok(())
			},
			RuntimeParametersKey::Contract(_) => {
				frame_system::ensure_root(origin.clone()).map_err(|_| origin)?;
				return Ok(())
			},
		}
	}

	#[cfg(feature = "runtime-benchmarks")]
	fn try_successful_origin(_key: &RuntimeParametersKey) -> Result<RuntimeOrigin, ()> {
		Ok(RuntimeOrigin::Root)
	}
}
```

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Nikhil Gupta <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: command-bot <>

Superseeds https://github.com/paritytech/polkadot-sdk/pull/1245  

This PR is a migration of the
https://github.com/paritytech/substrate/pull/14577

.

The PR added associated types (`AddOrigin` & `RemoveOrigin`) to
`Config`. It allows you to decouple types and areas of responsibility,
since at the moment the same types are responsible for adding and
promoting(removing and demoting). This will improve the flexibility of
the pallet configuration.

```
/// The origin required to add a member.
type AddOrigin: EnsureOrigin<Self::RuntimeOrigin, Success = ()>;

/// The origin required to remove a member. The success value indicates the
/// maximum rank *from which* the removal may be.
type RemoveOrigin: EnsureOrigin<Self::RuntimeOrigin, Success = Rank>;
```
To achieve the backward compatibility, the users of the pallet can use
the old type via the new morph:

```
type AddOrigin = MapSuccess<Self::PromoteOrigin, Ignore>;
type RemoveOrigin = Self::DemoteOrigin;
```

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: PraetorP <[email protected]>
Co-authored-by: Pavel Orlov <[email protected]>

Fixup for https://github.com/paritytech/polkadot-sdk/pull/2587 to make
the `core-fellowship` crate work with swapped members.

Adds a `MemberSwappedHandler` to the `ranked-collective` pallet that are
implemented by `core-fellowship+salary`.
There is are exhaustive tests
[here](https://github.com/paritytech/polkadot-sdk/blob/72aa7ac17a0e5b16faab5d2992aa2db2e01b05d0/substrate/frame/core-fellowship/src/tests/integration.rs#L338)
and
[here](https://github.com/paritytech/polkadot-sdk/blob/ab3cdb05a5ebc1ff841f8dda67edef0ea40bbba5/substrate/frame/salary/src/tests/integration.rs#L224

)
to check that adding member `1` is equivalent to adding member `0` and
then swapping.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

[frame] `#[pallet::composite_enum]` improved variant count handling + removed `pallet_balances`'s `MaxHolds` config (#2657)

I started this investigation/issue based on @liamaharon question
[here](https://github.com/paritytech/polkadot-sdk/pull/1801#discussion_r1410452499).

## Problem

The `pallet_balances` integrity test should correctly detect that the
runtime has correct distinct `HoldReasons` variant count. I assume the
same situation exists for RuntimeFreezeReason.

It is not a critical problem, if we set `MaxHolds` with a sufficiently
large value, everything should be ok. However, in this case, the
integrity_test check becomes less useful.

**Situation for "any" runtime:**
- `HoldReason` enums from different pallets:
```rust
        /// from pallet_nis
        #[pallet::composite_enum]
	pub enum HoldReason {
		NftReceipt,
	}

        /// from pallet_preimage
        #[pallet::composite_enum]
	pub enum HoldReason {
		Preimage,
	}

        // from pallet_state-trie-migration
        #[pallet::composite_enum]
	pub enum HoldReason {
		SlashForContinueMigrate,
		SlashForMigrateCustomTop,
		SlashForMigrateCustomChild,
	}
```

- generated `RuntimeHoldReason` enum looks like:
```rust
pub enum RuntimeHoldReason {

    #[codec(index = 32u8)]
    Preimage(pallet_preimage::HoldReason),

    #[codec(index = 38u8)]
    Nis(pallet_nis::HoldReason),

    #[codec(index = 42u8)]
    StateTrieMigration(pallet_state_trie_migration::HoldReason),
}
```

- composite enum `RuntimeHoldReason` variant count is detected as `3`
- we set `type MaxHolds = ConstU32<3>`
- `pallet_balances::integrity_test` is ok with `3`(at least 3)

However, the real problem can occur in a live runtime where some
functionality might stop working. This is due to a total of 5 distinct
hold reasons (for pallets with multi-instance support, it is even more),
and not all of them can be used because of an incorrect `MaxHolds`,
which is deemed acceptable according to the `integrity_test`:
  ```
  // pseudo-code - if we try to call all of these:

T::Currency::hold(&pallet_nis::HoldReason::NftReceipt.into(),
&nft_owner, deposit)?;
T::Currency::hold(&pallet_preimage::HoldReason::Preimage.into(),
&nft_owner, deposit)?;

T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForContinueMigrate.into(),
&nft_owner, deposit)?;

  // With `type MaxHolds = ConstU32<3>` these two will fail

T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomTop.into(),
&nft_owner, deposit)?;

T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomChild.into(),
&nft_owner, deposit)?;
  ```  


## Solutions

A macro `#[pallet::*]` expansion is extended of `VariantCount`
implementation for the `#[pallet::composite_enum]` enum type. This
expansion generates the `VariantCount` implementation for pallets'
`HoldReason`, `FreezeReason`, `LockId`, and `SlashReason`. Enum variants
must be plain enum values without fields to ensure a deterministic
count.

The composite runtime enum, `RuntimeHoldReason` and
`RuntimeFreezeReason`, now sets `VariantCount::VARIANT_COUNT` as the sum
of pallets' enum `VariantCount::VARIANT_COUNT`:
```rust
#[frame_support::pallet(dev_mode)]
mod module_single_instance {

	#[pallet::composite_enum]
	pub enum HoldReason {
		ModuleSingleInstanceReason1,
		ModuleSingleInstanceReason2,
	}
...
}

#[frame_support::pallet(dev_mode)]
mod module_multi_instance {

	#[pallet::composite_enum]
	pub enum HoldReason<I: 'static = ()> {
		ModuleMultiInstanceReason1,
		ModuleMultiInstanceReason2,
		ModuleMultiInstanceReason3,
	}
...
}


impl self::sp_api_hidden_includes_construct_runtime::hidden_include::traits::VariantCount
    for RuntimeHoldReason
{
    const VARIANT_COUNT: u32 = 0
        + module_single_instance::HoldReason::VARIANT_COUNT
        + module_multi_instance::HoldReason::<module_multi_instance::Instance1>::VARIANT_COUNT
        + module_multi_instance::HoldReason::<module_multi_instance::Instance2>::VARIANT_COUNT
        + module_multi_instance::HoldReason::<module_multi_instance::Instance3>::VARIANT_COUNT;
}
```

In addition, `MaxHolds` is removed (as suggested
[here](https://github.com/paritytech/polkadot-sdk/pull/2657#discussion_r1443324573))
from `pallet_balances`, and its `Holds` are now bounded to
`RuntimeHoldReason::VARIANT_COUNT`. Therefore, there is no need to let
the runtime specify `MaxHolds`.


## For reviewers

Relevant changes can be found here:
- `substrate/frame/support/procedural/src/lib.rs` 
-  `substrate/frame/support/procedural/src/pallet/parse/composite.rs`
-  `substrate/frame/support/procedural/src/pallet/expand/composite.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/composite_helper.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/hold_reason.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/freeze_reason.rs`
- `substrate/frame/support/src/traits/misc.rs`

And the rest of the files is just about removed `MaxHolds` from
`pallet_balances`

## Next steps

Do the same for `MaxFreezes`
https://github.com/paritytech/polkadot-sdk/issues/2997

.

---------

Co-authored-by: command-bot <>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Dónal Murray <[email protected]>
Co-authored-by: gupnik <[email protected]>

closes https://github.com/polkadot-fellows/help-center/issues/1



---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

Moves `pallet_mmr` back behind `pallet_session` to address
polkadot-fellows/runtimes#160.

Opening draft for CI - should be merged or closed depending on outcome
of w3f/polkadot-spec#718.

---------

Co-authored-by: Adrian Catangiu <[email protected]>

## Summary

This PR consolidates `pallet-state-trie-migration` as a part of
https://github.com/paritytech/polkadot-sdk/issues/226 /
https://github.com/paritytech/polkadot-sdk/issues/171:

`pallet-state-trie-migration`:
- [x] replace `Currency` with `fungible` traits
- [x] run benchmarks
- [x] refactor to `DefaultConfig`

`pallet_nicks`:
- [x]  remove

others:
- [x] remove `as Fn*` or `asFun*` stuff based on discussion
[here](https://github.com/paritytech/polkadot-sdk/issues/226#issuecomment-1822861445

)

---------

Co-authored-by: Richard Melkonian <[email protected]>
Co-authored-by: command-bot <>

Clean up all the old syntax.

---------

Co-authored-by: command-bot <>
Co-authored-by: gupnik <[email protected]>
Co-authored-by: Nikhil Gupta <[email protected]>
Co-authored-by: Maksym H <[email protected]>

Related to https://github.com/paritytech/polkadot-sdk/issues/2787

Fixes `pallet_mmr::Config` for the kitchensink runtime

This PR allows _username authorities_ to issue unique usernames that
correspond with an account. It also provides two-way lookup, that is
from `AccountId` to a single, "primary" `Username` (alongside
`Registration`) and multiple unique `Username`s to an `AccountId`.

Key features:

- Username Authorities added (and removed) via privileged origin.
- Authorities have a `suffix` and an `allocation`. They can grant up to
`allocation` usernames. Their `suffix` will be appended to the usernames
that they issue. A suffix may be up to 7 characters long.
- Users can ask an authority to grant them a username. This will take
the form `myusername.suffix`. The entire name (including suffix) must be
less than or equal to 32 alphanumeric characters.
- Users can approve a username for themselves in one of two ways (that
is, authorities cannot grant them arbitrarily):
- Pre-sign the entire username (including suffix) with a secret key that
corresponds to their `AccountId` (for keyed accounts, obviously); or
- Accept the username after it has been granted by an authority (it will
be queued until accepted) (for non-keyed accounts like pure proxies or
multisigs).
- The system does not require any funds or deposits. Users without an
identity will be given a default one (presumably all fields set to
`None`). If they update this info, they will need to place the normal
storage deposit.
- If a user does not have any username, their first one will be set as
`Primary`, and their `AccountId` will map to that one. If they get
subsequent usernames, they can choose which one to be their primary via
`set_primary_username`.
- There are some state cleanup functions to remove expired usernames
that have not been accepted and dangling usernames whose owners have
called `clear_identity`.

TODO:

- [x] Add migration to runtimes
- [x] Probably do off-chain migration into People Chain genesis
- [x] Address a few TODO questions in code (please review)

---------

Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Gonçalo Pestana <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Dónal Murray <[email protected]>

Related to https://github.com/paritytech/polkadot-sdk/issues/2787

Adding BEEFY support to the kitchensink chain in order to be able to
extend the current warp sync zombienet tests with BEEFY enabled

Also fixes: https://github.com/paritytech/polkadot-sdk/issues/1417



- [x] CoreIndex -> AssignmentProvider mapping will be able to change any
time.
- [x] Implement
- [x] Provide Migrations
- [x] Add and fix tests
- [x] Implement bulk assigner logic
- [x] bulk assigner tests
- [x] Port over current assigner to use bulk designer (+ share on-demand
with bulk): top-level assigner has core ranges: legacy, bulk
- [x] Adjust migrations to reflect new assigner structure
- [x] Move migration code to Assignment code directly and make it
recursive (make it possible to skip releases) -> follow up ticket.
- [x] Test migrations
- [x] Add migration PR to runtimes repo -> follow up ticket.
- [x] Wire up with actual UMP messages
- [x] Write PR docs

---------

Co-authored-by: eskimor <[email protected]>
Co-authored-by: Bradley Olson <[email protected]>
Co-authored-by: BradleyOlson64 <[email protected]>
Co-authored-by: Anton Vilhelm Ásgeirsson <[email protected]>
Co-authored-by: antonva <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Marcin S. <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: command-bot <>

closes https://github.com/paritytech/polkadot-sdk/issues/1842

Decoupling Pallet from the Concept of Native Currency

Currently, the pallet is intrinsically linked with the concept of native
currency, requiring users to provide implementations of the
`fungible::*` and `fungibles::*` traits to interact with native and non
native assets. This incapsulates some non-related to the pallet
complexity and makes it less adaptable in contexts where the native
currency concept is absent.

With this PR, the dependence on `fungible::*` for liquidity-supplying
assets has been removed. Instead, the native and non-native currencies'
handling is now overseen by a single type that implements the
`fungibles::*` traits. To simplify this integration, types have been
introduced to facilitate the creation of a union between `fungible::*`
and `fungibles::*` implementations, producing a unified `fungibles::*`
type.

One of the reasons driving these changes is the ambition to create a
more user-friendly API for the `SwapCredit` implementation. Given that
it interacts with two distinct credit types from `fungible` and
`fungibles`, a unified type was introduced. Clients now manage potential
conversion failures for those credit types. In certain contexts, it's
vital to guarantee that operations are fail-safe, like in this impl -
[PR](https://github.com/paritytech/polkadot-sdk/pull/1845), place in
[code](https://github.com/paritytech/polkadot-sdk/blob/20b85a5fada8f55c98ba831964f5866ffeadf4da/cumulus/primitives/utility/src/lib.rs#L429).

Additional Updates:
- abstracted the pool ID and its account derivation logic via trait
bounds, along with common implementation offerings;
- removed `inc_providers` on a pool creation for the pool account;
- benchmarks:
-- swap complexity is N, not const;
-- removed `From<u128> + Into<u128>` bound from `T::Balance`;
-- removed swap/liquidity/.. amount constants, resolve them dynamically
based on pallet configuration;
-- migrated to v2 API;
- `OnUnbalanced` handler for the pool creation fee, replacing direct
transfers to a specified account ID;
- renamed `MultiAssetId` to `AssetKind` aligning with naming across
frame crates;

related PRs:
- (depends) https://github.com/paritytech/polkadot-sdk/pull/1677
- (caused) https://github.com/paritytech/polkadot-sdk/pull/2033
- (caused) https://github.com/paritytech/polkadot-sdk/pull/1876



---------

Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>

Introduces a swap implementation that allows the exchange of a credit
(aka Negative Imbalance) of one asset for a credit of another asset.

This is particularly useful when a credit swap is required but may not
have sufficient value to meet the ED constraint, hence cannot be
deposited to temp account before. An example use case is when XCM fees
are paid using an asset held in the XCM executor registry and has to be
swapped for native currency.

Additional Updates:
- encapsulates the existing `Swap` trait impl within a transactional
context, since partial storage mutation is possible when an error
occurs;
- supplied `Currency` and `Assets` impls must be implemented over the
same `Balance` type, the `AssetBalance` generic type is dropped. This
helps to avoid numerous type conversion and overflow cases. If those
types are different it should be handled outside of the pallet;
- `Box` asset kind on a pallet level, unbox on a runtime level - here
[why](https://substrate.stackexchange.com/questions/10039/boxed-argument-of-a-dispatchable/10103#10103);
- `path` uses `Vec` now, instead of `BoundedVec` since it is never used
in PoV;
- removes the `Transfer` event due to it's redundancy with the events
emitted by `fungible/s` implementations;
- modifies the `SwapExecuted` event type;

related issue: 
- https://github.com/paritytech/polkadot-sdk/issues/105

related PRs:
- (required for) https://github.com/paritytech/polkadot-sdk/pull/1845
- (caused) https://github.com/paritytech/polkadot-sdk/pull/1717

// DONE make the pallet work only with `fungibles` trait and make it
free from the concept of a `native` asset -
https://github.com/paritytech/polkadot-sdk/issues/1842



---------

Co-authored-by: joe petrowski <[email protected]>

New runtimes for the Coretime Chain (a.k.a. "Broker Chain") described in
RFC-1.

Replaces https://github.com/paritytech/cumulus/pull/2889


- [x] Add Agile Coretime pallet
https://github.com/paritytech/substrate/pull/14568
- [x] Generate chain specs for local and testnets
- [x] Deploy parachain on Rococo - Done:
[rococo-coretime-rpc.polkadot.io](https://polkadot.js.org/apps/?rpc=wss%3A%2F%2Frococo-coretime-rpc.polkadot.io#/explorer)

DevOps issue for Aura keygen:
https://github.com/paritytech/devops/issues/2725



Edit (Dónal): This PR is mainly for Rococo, the Westend runtime is a
shell with no `Broker` pallet. The Rococo runtime has the broker calls
filtered for initial deployment.

---------

Co-authored-by: Dónal Murray <[email protected]>
Co-authored-by: 0xmovses <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Marcin S. <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Branislav Kontur <[email protected]>

closes https://github.com/paritytech-secops/srlabs_findings/issues/78.

Removes `BetterUnsignedThreshold` from pallet EPM. This will essentially
mean any solution submitted by the validator that is strictly better
than the current queued solution would be accepted.

The reason for having these thresholds is to limit number of solutions
submitted on-chain. However for unsigned submissions, the number of
solutions that could be submitted on average is limited even without
thresholding (calculation shown in the corresponding issue).

Partially Addresses #2500

Adds a `deprecate_controller_batch` call to the staking pallet that is
callable by `Root` and `StakingAdmin`. To be used for controller account
deprecation and removed thereafter. Adds
`MaxControllersDeprecationBatch` pallet constant that defines max
possible deprecations per call.

- [x] Add `deprecate_controller_batch` call, and
`MaxControllersInDeprecationBatch` constant.
- [x] Add tests, benchmark, weights. Tests that weight is only consumed
if unique pair.
- [x] Adds `StakingAdmin` origin to staking's `AdminOrigin` type in
westend runtime.
- [x] Determined that worst case 5,900 deprecations does fit into
`maxBlock` `proofSize` and `refTime` in both normal and operational
thresholds, meaning we can deprecate all controllers for each network in
one call.

## Block Weights

By querying `consts.system.blockWeights` we can see that the
`deprecate_controller_batch` weights fit within the `normal` threshold
on Polkadot.

#### `controller_deprecation_batch` where i = 5900:
#### Ref time: 69,933,325,300
#### Proof size: 21,040,390

### Polkadot 

```
// consts.query.blockWeights

maxBlock: {
        refTime: 2,000,000,000,000
        proofSize: 18,446,744,073,709,551,615
}
normal: {
 maxExtrinsic: {
	refTime: 1,479,873,955,000
	proofSize: 13,650,590,614,545,068,195
 }
 maxTotal: {
	refTime: 1,500,000,000,000
	proofSize: 13,835,058,055,282,163,711
 }
}
```

### Kusama

```
// consts.query.blockWeights

  maxBlock: {
    refTime: 2,000,000,000,000
    proofSize: 18,446,744,073,709,551,615
  }
    normal: {
      maxExtrinsic: {
        refTime: 1,479,875,294,000
        proofSize: 13,650,590,614,545,068,195
      }
      maxTotal: {
        refTime: 1,500,000,000,000
        proofSize: 13,835,058,055,282,163,711
      }
}
```

---------

Co-authored-by: command-bot <>
Co-authored-by: Gonçalo Pestana <[email protected]>

This PR makes the block number provider configurable through the Config
trait in pallet-vesting, this gives parachains the option to use the
relay chain block number provider from ParachainSystem.

---------

Co-authored-by: Bastian Köcher <[email protected]>

`polkadot-sdk` version of original tasks PR located here:
https://github.com/paritytech/substrate/pull/14329

Fixes #206

## Status
- [x] Generic `Task` trait
- [x] `RuntimeTask` aggregated enum, compatible with
`construct_runtime!`
- [x] Casting between `Task` and `RuntimeTask` without needing `dyn` or
`Box`
- [x] Tasks Example pallet
- [x] Runtime tests for Tasks example pallet
- [x] Parsing for task-related macros
- [x] Retrofit parsing to make macros optional
- [x] Expansion for task-related macros
- [x] Adds support for args in tasks
- [x] Retrofit tasks example pallet to use macros instead of manual
syntax
- [x] Weights
- [x] Cleanup
- [x] UI tests
- [x] Docs

## Target Syntax
Adapted from
https://github.com/paritytech/polkadot-sdk/issues/206#issue-1865172283



```rust
// NOTE: this enum is optional and is auto-generated by the other macros if not present
#[pallet::task]
pub enum Task<T: Config> {
    AddNumberIntoTotal {
        i: u32,
    }
}

/// Some running total.
#[pallet::storage]
pub(super) type Total<T: Config<I>, I: 'static = ()> =
StorageValue<_, (u32, u32), ValueQuery>;

/// Numbers to be added into the total.
#[pallet::storage]
pub(super) type Numbers<T: Config<I>, I: 'static = ()> =
StorageMap<_, Twox64Concat, u32, u32, OptionQuery>;

#[pallet::tasks_experimental]
impl<T: Config<I>, I: 'static> Pallet<T, I> {
	/// Add a pair of numbers into the totals and remove them.
	#[pallet::task_list(Numbers::<T, I>::iter_keys())]
	#[pallet::task_condition(|i| Numbers::<T, I>::contains_key(i))]
	#[pallet::task_index(0)]
	pub fn add_number_into_total(i: u32) -> DispatchResult {
		let v = Numbers::<T, I>::take(i).ok_or(Error::<T, I>::NotFound)?;
		Total::<T, I>::mutate(|(total_keys, total_values)| {
			*total_keys += i;
			*total_values += v;
		});
		Ok(())
	}
}
```

---------

Co-authored-by: Nikhil Gupta <[email protected]>
Co-authored-by: kianenigma <[email protected]>
Co-authored-by: Nikhil Gupta <>
Co-authored-by: Gavin Wood <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: gupnik <[email protected]>

see #2189

This PR does the following:
- Bring the user api functions into a new pallet-contracts-uapi (They
are currently defined in ink!
[here])(https://github.com/paritytech/ink/blob/master/crates/env/src/engine/on_chain/ext.rs

)
- Add older api versions and unstable to the user api trait.
- Remove pallet-contracts-primitives and bring the types it defined in
uapi / pallet-contracts
- Add the infrastructure to build fixtures from Rust files and test it
works by replacing `dummy.wat` and `call.wat`
- Move all the doc from wasm/runtime.rs to pallet-contracts-uapi.

This will be done in a follow up:
- convert the rest of the test from .wat to rust
- bring risc-v uapi up to date with wasm
- finalize the uapi host fns, making sure everything is codegen from the
source host fns in pallet-contracts

---------

Co-authored-by: Alexander Theißen <[email protected]>

The versioned migrations are already there in pallet nomination-pools:

https://github.com/paritytech/polkadot-sdk/blob/f6ee4781f633f0f89598f7b230595afe401da8dc/substrate/frame/nomination-pools/src/migration.rs#L27-L48

Just updating the kitchensink runtime to point to them.

This is also nice because it points the dev to an example of how to use
`VersionedMigration`.

This PR introduces:
- XCM  host functions `xcm_send`, `xcm_execute`
- An Xcm trait into the config. that proxy these functions to to
`pallet_xcm`, or disable their usage by using `()`.
- A mock_network and xcm_test files to test the newly added xcm-related
functions.

---------

Co-authored-by: Keith Yeung <[email protected]>
Co-authored-by: Sasha Gryaznov <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Alexander Theißen <[email protected]>

Fixes https://github.com/paritytech/polkadot-sdk/issues/1725



This PR adds the following changes:
1. An attribute `pallet::feeless_if` that can be optionally attached to
a call like so:
```rust
#[pallet::feeless_if(|_origin: &OriginFor<T>, something: &u32| -> bool {
	*something == 0
})]
pub fn do_something(origin: OriginFor<T>, something: u32) -> DispatchResult {
     ....
}
```
The closure passed accepts references to arguments as specified in the
call fn. It returns a boolean that denotes the conditions required for
this call to be "feeless".

2. A signed extension `SkipCheckIfFeeless<T: SignedExtension>` that
wraps a transaction payment processor such as
`pallet_transaction_payment::ChargeTransactionPayment`. It checks for
all calls annotated with `pallet::feeless_if` to see if the conditions
are met. If so, the wrapped signed extension is not called, essentially
making the call feeless.

In order to use this, you can simply replace your existing signed
extension that manages transaction payment like so:
```diff
- pallet_transaction_payment::ChargeTransactionPayment<Runtime>,
+ pallet_skip_feeless_payment::SkipCheckIfFeeless<
+	Runtime,
+	pallet_transaction_payment::ChargeTransactionPayment<Runtime>,
+ >,
```

### Todo
- [x] Tests
- [x] Docs
- [x] Prdoc

---------

Co-authored-by: Nikhil Gupta <>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>

This PR is a follow up to #1661 

- [x] rename the `simple` module to `legacy`
- [x] fix benchmarks to disregard the number of additional fields
- [x] change the storage deposits to charge per encoded byte of the
identity information instance, removing the need for `fn
additional(&self) -> usize` in `IdentityInformationProvider`
- [x] ~add an extrinsic to rejig deposits to account for the change
above~
- [ ] ~ensure through proper configuration that the new byte-based
deposit is always lower than whatever is reserved now~
- [x] remove `IdentityFields` from the `set_fields` extrinsic signature,
as per [this
discussion](https://github.com/paritytech/polkadot-sdk/pull/1661#discussion_r1371703403)

> ensure through proper configuration that the new byte-based deposit is
always lower than whatever is reserved now

Not sure this is needed anymore. If the new deposits are higher than
what is currently on chain and users don't have enough funds to reserve
what is needed, the extrinisc fails and they're basically grandfathered
and frozen until they add more funds and/or make a change to their
identity. This behavior seems fine to me. Original idea
[here](https://github.com/paritytech/polkadot-sdk/pull/1661#issuecomment-1779606319).

> add an extrinsic to rejig deposits to account for the change above

This was initially implemented but now removed from this PR in favor of
the implementation detailed
[here](https://github.com/paritytech/polkadot-sdk/pull/2088

).

---------

Signed-off-by: georgepisaltu <[email protected]>
Co-authored-by: joepetrowski <[email protected]>

helps https://github.com/paritytech/polkadot-sdk/issues/439.
closes https://github.com/paritytech/polkadot-sdk/issues/473.

PR link in the older substrate repository:
https://github.com/paritytech/substrate/pull/13498.

# Context
Rewards payout is processed today in a single block and limited to
`MaxNominatorRewardedPerValidator`. This number is currently 512 on both
Kusama and Polkadot.

This PR tries to scale the nominators payout to an unlimited count in a
multi-block fashion. Exposures are stored in pages, with each page
capped to a certain number (`MaxExposurePageSize`). Starting out, this
number would be the same as `MaxNominatorRewardedPerValidator`, but
eventually, this number can be lowered through new runtime upgrades to
limit the rewardeable nominators per dispatched call instruction.

The changes in the PR are backward compatible.

## How payouts would work like after this change
Staking exposes two calls, 1) the existing `payout_stakers` and 2)
`payout_stakers_by_page`.

### payout_stakers
This remains backward compatible with no signature change. If for a
given era a validator has multiple pages, they can call `payout_stakers`
multiple times. The pages are executed in an ascending sequence and the
runtime takes care of preventing double claims.

### payout_stakers_by_page
Very similar to `payout_stakers` but also accepts an extra param
`page_index`. An account can choose to payout rewards only for an
explicitly passed `page_index`.

**Lets look at an example scenario**
Given an active validator on Kusama had 1100 nominators,
`MaxExposurePageSize` set to 512 for Era e. In order to pay out rewards
to all nominators, the caller would need to call `payout_stakers` 3
times.

- `payout_stakers(origin, stash, e)` => will pay the first 512
nominators.
- `payout_stakers(origin, stash, e)` => will pay the second set of 512
nominators.
- `payout_stakers(origin, stash, e)` => will pay the last set of 76
nominators.
...
- `payout_stakers(origin, stash, e)` => calling it the 4th time would
return an error `InvalidPage`.

The above calls can also be replaced by `payout_stakers_by_page` and
passing a `page_index` explicitly.

## Commission note
Validator commission is paid out in chunks across all the pages where
each commission chunk is proportional to the total stake of the current
page. This implies higher the total stake of a page, higher will be the
commission. If all the pages of a validator's single era are paid out,
the sum of commission paid to the validator across all pages should be
equal to what the commission would have been if we had a non-paged
exposure.

### Migration Note
Strictly speaking, we did not need to bump our storage version since
there is no migration of storage in this PR. But it is still useful to
mark a storage upgrade for the following reasons:

- New storage items are introduced in this PR while some older storage
items are deprecated.
- For the next `HistoryDepth` eras, the exposure would be incrementally
migrated to its corresponding paged storage item.
- Runtimes using staking pallet would strictly need to wait at least
`HistoryDepth` eras with current upgraded version (14) for the migration
to complete. At some era `E` such that `E >
era_at_which_V14_gets_into_effect + HistoryDepth`, we will upgrade to
version X which will remove the deprecated storage items.
In other words, it is a strict requirement that E<sub>x</sub> -
E<sub>14</sub> > `HistoryDepth`, where
E<sub>x</sub> = Era at which deprecated storages are removed from
runtime,
E<sub>14</sub> = Era at which runtime is upgraded to version 14.
- For Polkadot and Kusama, there is a [tracker
ticket](https://github.com/paritytech/polkadot-sdk/issues/433) to clean
up the deprecated storage items.

### Storage Changes

#### Added
- ErasStakersOverview
- ClaimedRewards
- ErasStakersPaged

#### Deprecated
The following can be cleaned up after 84 eras which is tracked
[here](https://github.com/paritytech/polkadot-sdk/issues/433).

- ErasStakers.
- ErasStakersClipped.
- StakingLedger.claimed_rewards, renamed to
StakingLedger.legacy_claimed_rewards.

### Config Changes
- Renamed MaxNominatorRewardedPerValidator to MaxExposurePageSize.

### TODO
- [x] Tracker ticket for cleaning up the old code after 84 eras.
- [x] Add companion.
- [x] Redo benchmarks before merge.
- [x] Add Changelog for pallet_staking.
- [x] Pallet should be configurable to enable/disable paged rewards.
- [x] Commission payouts are distributed across pages.
- [x] Review documentation thoroughly.
- [x] Rename `MaxNominatorRewardedPerValidator` ->
`MaxExposurePageSize`.
- [x] NMap for `ErasStakersPaged`.
- [x] Deprecate ErasStakers.
- [x] Integrity tests.

### Followup issues
[Runtime api for deprecated ErasStakers storage
item](https://github.com/paritytech/polkadot-sdk/issues/426

)

---------

Co-authored-by: Javier Viola <[email protected]>
Co-authored-by: Ross Bulat <[email protected]>
Co-authored-by: command-bot <>

# Description

The `trigger_defensive` call has been added to the `root-testing`
pallet. The idea is to have this pallet running on `Rococo/Westend` and
use it to verify if the runtime monitoring works end-to-end.

To accomplish this, `trigger_defensive` dispatches an event when it is
called.

Closes #1953

# Checklist

- [x] My PR includes a detailed description as outlined in the
"Description" section above
- [ ] My PR follows the [labeling requirements](CONTRIBUTING.md#Process)
of this project (at minimum one label for `T`
  required)
- [ ] I have made corresponding changes to the documentation (if
applicable)
- [ ] I have added tests that prove my fix is effective or that my
feature works (if applicable)

You can remove the "Checklist" section once all have been checked. Thank
you for your contribution!

✄
-----------------------------------------------------------------------------

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

Partial https://github.com/paritytech/polkadot-sdk/issues/226



`frame/transaction-storage`: replace `Currency` with `fungible::*`
traits

---------

Signed-off-by: Adrian Catangiu <[email protected]>
Co-authored-by: georgepisaltu <[email protected]>

# Description

- What does this PR do?

While working with `pallet_nfts` through `nonfungibles_v2` traits
`Inspect, Mutate`, I found out that once you have set the collection
attribute with `<Nfts as Mutate>::set_collection_attribute()`, it's not
possible to read it with `<Nfts as Inspect>::collection_attribute()`
since they use different `namespace` values. When setting the attribute,
`AttributeNamespace::Pallet` is used, while
`AttributeNamespace::CollectionOwner` is used when reading.

more context:
https://github.com/freeverseio/laos/issues/7#issuecomment-1766137370

This PR makes `item` an optional parameter in
`Inspect::system_attribute()`, to be able to read collection attributes.

- Why are these changes needed?

To be able to read collection level attributes when reading attributes
of the collection. It will be possible to read collection attributes by
passing `None` for `item`

- How were these changes implemented and what do they affect?

`NftsApi` is also affected and `NftsApi::system_attribute()` now accepts
optional `item` parameter.

## Breaking change

Because of the change in the `NftsApi::system_attribute()` method's
`item` param, parachains who integrated the `NftsApi` need to update
their API code and frontend integrations accordingly. AssetHubs are
unaffected since the NftsApi wasn't released on those parachains yet.