Skip to content
  1. Mar 03, 2024
  3. Mar 02, 2024
    • gupnik's avatar
      Remove `as frame_system::DefaultConfig` from the required syntax in `derive_impl` (#3505) · cdc8d197
      gupnik authored 
      Step in https://github.com/paritytech/polkadot-sdk/issues/171

This PR removes the need to specify `as [disambiguation_path]` for cases
where the trait definition resides within the same scope as default impl
path.

For example, in the following macro invocation
```rust
#[derive_impl(frame_system::config_preludes::TestDefaultConfig as frame_system::DefaultConfig)]
impl frame_system::Config for Runtime {
   ...
}
```
the trait `DefaultConfig` lies within the `frame_system` scope and
`TestDefaultConfig` impls the `DefaultConfig` trait. Using this
information, we can compute the disambiguation path internally, thus
removing the need of an explicit specification.

In cases where the trait lies outside this scope, we would still need to
specify it explicitly, but this should take care of most (if not all)
uses of `derive_impl` within FRAME's context.
      cdc8d197
  5. Feb 29, 2024
    • Kian Paimani's avatar
      Fix call enum's metadata regression (#3513) · c0e52a9e
      Kian Paimani authored 
      This fixes an issue introduced in
https://github.com/paritytech/substrate/pull/14101, in which I removed
the `Call` enum's documentation and replaced it with a link to the
`Pallet` struct, but this also removed any docs related to call from the
metadata.

I tried to add a regression test for this, but it seems to me that this
is not possible, given that using `type-info` we only assert in type-ids
for `Call`, `Event` and `Error`. I removed some doc comments from a test
setup in `frame-support-test` to demonstrate the issue there. @jsdw do
you have any comments on this?

I also fixed a small issue in the custom html/css of `polkadot-sdk-doc`
crate, making sure it does not affect the rust-doc page of all other
crates.

- [x] Investigate a regression test
- [x] prdoc
      c0e52a9e
  7. Feb 28, 2024
    • Oliver Tale-Yazdi's avatar
      Multi-Block-Migrations, `poll` hook and new System callbacks (#1781) · eefd5fe4
      Oliver Tale-Yazdi authored 
      This MR is the merge of
https://github.com/paritytech/substrate/pull/14414 and
https://github.com/paritytech/substrate/pull/14275. It implements
[RFC#13](https://github.com/polkadot-fellows/RFCs/pull/13), closes
https://github.com/paritytech/polkadot-sdk/issues/198.

----- 

This Merge request introduces three major topicals:

1. Multi-Block-Migrations
1. New pallet `poll` hook for periodic service work
1. Replacement hooks for `on_initialize` and `on_finalize` in cases
where `poll` cannot be used

and some more general changes to FRAME.  
The changes for each topical span over multiple crates. They are listed
in topical order below.

# 1.) Multi-Block-Migrations

Multi-Block-Migrations are facilitated by creating `pallet_migrations`
and configuring `System::Config::MultiBlockMigrator` to point to it.
Executive picks this up and triggers one step of the migrations pallet
per block.
The chain is in lockdown mode for as long as an MBM is ongoing.
Executive does this by polling `MultiBlockMigrator::ongoing` and not
allowing any transaction in a block, if true.

A MBM is defined through trait `SteppedMigration`. A condensed version
looks like this:
```rust
/// A migration that can proceed in multiple steps.
pub trait SteppedMigration {
	type Cursor: FullCodec + MaxEncodedLen;
	type Identifier: FullCodec + MaxEncodedLen;

	fn id() -> Self::Identifier;

	fn max_steps() -> Option<u32>;

	fn step(
		cursor: Option<Self::Cursor>,
		meter: &mut WeightMeter,
	) -> Result<Option<Self::Cursor>, SteppedMigrationError>;
}
```

`pallet_migrations` can be configured with an aggregated tuple of these
migrations. It then starts to migrate them one-by-one on the next
runtime upgrade.
Two things are important here:
- 1. Doing another runtime upgrade while MBMs are ongoing is not a good
idea and can lead to messed up state.
- 2. **Pallet Migrations MUST BE CONFIGURED IN `System::Config`,
otherwise it is not used.**

The pallet supports an `UpgradeStatusHandler` that can be used to notify
external logic of upgrade start/finish (for example to pause XCM
dispatch).

Error recovery is very limited in the case that a migration errors or
times out (exceeds its `max_steps`). Currently the runtime dev can
decide in `FailedMigrationHandler::failed` how to handle this. One
follow-up would be to pair this with the `SafeMode` pallet and enact
safe mode when an upgrade fails, to allow governance to rescue the
chain. This is currently not possible, since governance is not
`Mandatory`.

## Runtime API

- `Core`: `initialize_block` now returns `ExtrinsicInclusionMode` to
inform the Block Author whether they can push transactions.

### Integration

Add it to your runtime implementation of `Core` and `BlockBuilder`:
```patch
diff --git a/runtime/src/lib.rs b/runtime/src/lib.rs
@@ impl_runtime_apis! {
	impl sp_block_builder::Core<Block> for Runtime {
-		fn initialize_block(header: &<Block as BlockT>::Header) {
+		fn initialize_block(header: &<Block as BlockT>::Header) -> RuntimeExecutiveMode {
			Executive::initialize_block(header)
		}

		...
	}
```

# 2.) `poll` hook

A new pallet hook is introduced: `poll`. `Poll` is intended to replace
mostly all usage of `on_initialize`.
The reason for this is that any code that can be called from
`on_initialize` cannot be migrated through an MBM. Currently there is no
way to statically check this; the implication is to use `on_initialize`
as rarely as possible.
Failing to do so can result in broken storage invariants.

The implementation of the poll hook depends on the `Runtime API` changes
that are explained above.

# 3.) Hard-Deadline callbacks

Three new callbacks are introduced and configured on `System::Config`:
`PreInherents`, `PostInherents` and `PostTransactions`.
These hooks are meant as replacement for `on_initialize` and
`on_finalize` in cases where the code that runs cannot be moved to
`poll`.
The reason for this is to make the usage of HD-code (hard deadline) more
explicit - again to prevent broken invariants by MBMs.

# 4.) FRAME (general changes)

## `frame_system` pallet

A new memorize storage item `InherentsApplied` is added. It is used by
executive to track whether inherents have already been applied.
Executive and can then execute the MBMs directly between inherents and
transactions.

The `Config` gets five new items:
- `SingleBlockMigrations` this is the new way of configuring migrations
that run in a single block. Previously they were defined as last generic
argument of `Executive`. This shift is brings all central configuration
about migrations closer into view of the developer (migrations that are
configured in `Executive` will still work for now but is deprecated).
- `MultiBlockMigrator` this can be configured to an engine that drives
MBMs. One example would be the `pallet_migrations`. Note that this is
only the engine; the exact MBMs are injected into the engine.
- `PreInherents` a callback that executes after `on_initialize` but
before inherents.
- `PostInherents` a callback that executes after all inherents ran
(including MBMs and `poll`).
- `PostTransactions` in symmetry to `PreInherents`, this one is called
before `on_finalize` but after all transactions.

A sane default is to set all of these to `()`. Example diff suitable for
any chain:
```patch
@@ impl frame_system::Config for Test {
 	type MaxConsumers = ConstU32<16>;
+	type SingleBlockMigrations = ();
+	type MultiBlockMigrator = ();
+	type PreInherents = ();
+	type PostInherents = ();
+	type PostTransactions = ();
 }
```

An overview of how the block execution now looks like is here. The same
graph is also in the rust doc.

<details><summary>Block Execution Flow</summary>
<p>

![Screenshot 2023-12-04 at 19 11
29](https://github.com/paritytech/polkadot-sdk/assets/10380170/e88a80c4-ef11-4faa-8df5-8b33a724c054)

</p>
</details> 

## Inherent Order

Moved to https://github.com/paritytech/polkadot-sdk/pull/2154



---------------


## TODO

- [ ] Check that `try-runtime` still works
- [ ] Ensure backwards compatibility with old Runtime APIs
- [x] Consume weight correctly
- [x] Cleanup

---------

Signed-off-by: default avatarOliver Tale-Yazdi <[email protected]>
Co-authored-by: default avatarLiam Aharon <[email protected]>
Co-authored-by: default avatarJuan Girini <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: default avatarFrancisco Aguirre <[email protected]>
Co-authored-by: default avatarGavin Wood <[email protected]>
Co-authored-by: default avatarBastian Köcher <[email protected]>
      eefd5fe4
    • Kian Paimani's avatar
      Add documentation around FRAME Offchain workers (#3463) · 14530269
      Kian Paimani authored 
      - deprecation companion:
https://github.com/substrate-developer-hub/substrate-docs/pull/2136
- inspired by
https://substrate.stackexchange.com/questions/11058/how-can-i-create-ocw-that-wont-activates-every-block-but-will-activates-only-w/11060#11060



---------

Co-authored-by: default avatarSergej Sakac <[email protected]>
      14530269
    • Liam Aharon's avatar
      Runtime Upgrade ref docs and Single Block Migration example pallet (#1554) · 12ce4f7d
      Liam Aharon authored 
      Closes https://github.com/paritytech/polkadot-sdk-docs/issues/55

- Changes 'current storage version' terminology to less ambiguous
'in-code storage version' (suggestion by @ggwpez)
- Adds a new example pallet `pallet-example-single-block-migrations`
- Adds a new reference doc to replace
https://docs.substrate.io/maintain/runtime-upgrades/ (temporarily living
in the pallet while we wait for developer hub PR to merge)
- Adds documentation for the `storage_alias` macro
- Improves `trait Hooks` docs 
- Improves `trait GetStorageVersion` docs
- Update the suggested patterns for using `VersionedMigration`, so that
version unchecked migrations are never exported
- Prevents accidental usage of version unchecked migrations in runtimes

https://github.com/paritytech/substrate/pull/14421#discussion_r1255467895
- Unversioned migration code is kept inside `mod version_unchecked`,
versioned code is kept in `pub mod versioned`
- It is necessary to use modules to limit visibility because the inner
migration must be `pub`. See
https://github.com/rust-lang/rust/issues/30905 and

https://internals.rust-lang.org/t/lang-team-minutes-private-in-public-rules/4504/40
for more.

### todo

- [x] move to reference docs to proper place within sdk-docs (now that
https://github.com/paritytech/polkadot-sdk/pull/2102

 is merged)
- [x] prdoc

---------

Co-authored-by: default avatarKian Paimani <[email protected]>
Co-authored-by: default avatarJuan <[email protected]>
Co-authored-by: default avatarOliver Tale-Yazdi <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: default avatargupnik <[email protected]>
      12ce4f7d
    • Liam Aharon's avatar
      Introduce storage attr macro `#[disable_try_decode_storage]` and set it on... · 95da6583
      Liam Aharon authored 
      Introduce storage attr macro `#[disable_try_decode_storage]` and set it on `System::Events` and `ParachainSystem::HostConfiguration` (#3454)

Closes https://github.com/paritytech/polkadot-sdk/issues/2560

Allows marking storage items with `#[disable_try_decode_storage]`, and
uses it with `System::Events`.

Question: what's the recommended way to write a test for this? I
couldn't find a test for similar existing macro `#[whitelist_storage]`.
      95da6583
  9. Feb 27, 2024
  11. Feb 26, 2024
  13. Feb 22, 2024
  15. Feb 20, 2024
    • Oliver Tale-Yazdi's avatar
      Lift dependencies to the workspace (Part 2/x) (#3366) · e89d0fca
      Oliver Tale-Yazdi authored 
      

Lifting some more dependencies to the workspace. Just using the
most-often updated ones for now.
It can be reproduced locally.

```sh
# First you can check if there would be semver incompatible bumps (looks good in this case):
$ zepter transpose dependency lift-to-workspace --ignore-errors syn quote thiserror "regex:^serde.*"

# Then apply the changes:
$ zepter transpose dependency lift-to-workspace --version-resolver=highest syn quote thiserror "regex:^serde.*" --fix

# And format the changes:
$ taplo format --config .config/taplo.toml
```

---------

Signed-off-by: default avatarOliver Tale-Yazdi <[email protected]>
      e89d0fca
  17. Feb 16, 2024
  19. Feb 12, 2024
  21. Feb 08, 2024
    • Oliver Tale-Yazdi's avatar
      [FRAME] Parameters pallet (#2061) · e53ebd8c
      Oliver Tale-Yazdi authored 
      Closes #169  

Fork of the `orml-parameters-pallet` as introduced by
https://github.com/open-web3-stack/open-runtime-module-library/pull/927


(cc @xlc)
It greatly changes how the macros work, but keeps the pallet the same.
The downside of my code is now that it does only support constant keys
in the form of types, not value-bearing keys.
I think this is an acceptable trade off, give that it can be used by
*any* pallet without any changes.

The pallet allows to dynamically set parameters that can be used in
pallet configs while also restricting the updating on a per-key basis.
The rust-docs contains a complete example.

Changes:
- Add `parameters-pallet`
- Use in the kitchensink as demonstration
- Add experimental attribute to define dynamic params in the runtime.
- Adding a bunch of traits to `frame_support::traits::dynamic_params`
that can be re-used by the ORML macros

## Example

First to define the parameters in the runtime file. The syntax is very
explicit about the codec index and errors if there is no.
```rust
#[dynamic_params(RuntimeParameters, pallet_parameters::Parameters::<Runtime>))]
pub mod dynamic_params {
	use super::*;

	#[dynamic_pallet_params]
	#[codec(index = 0)]
	pub mod storage {
		/// Configures the base deposit of storing some data.
		#[codec(index = 0)]
		pub static BaseDeposit: Balance = 1 * DOLLARS;

		/// Configures the per-byte deposit of storing some data.
		#[codec(index = 1)]
		pub static ByteDeposit: Balance = 1 * CENTS;
	}

	#[dynamic_pallet_params]
	#[codec(index = 1)]
	pub mod contracts {
		#[codec(index = 0)]
		pub static DepositPerItem: Balance = deposit(1, 0);

		#[codec(index = 1)]
		pub static DepositPerByte: Balance = deposit(0, 1);
	}
}
```

Then the pallet is configured with the aggregate:  
```rust
impl pallet_parameters::Config for Runtime {
	type AggregratedKeyValue = RuntimeParameters;
	type AdminOrigin = EnsureRootWithSuccess<AccountId, ConstBool<true>>;
	...
}
```

And then the parameters can be used in a pallet config:
```rust
impl pallet_preimage::Config for Runtime {
	type DepositBase = dynamic_params::storage::DepositBase;
}
```

A custom origin an be defined like this:  
```rust
pub struct DynamicParametersManagerOrigin;

impl EnsureOriginWithArg<RuntimeOrigin, RuntimeParametersKey> for DynamicParametersManagerOrigin {
	type Success = ();

	fn try_origin(
		origin: RuntimeOrigin,
		key: &RuntimeParametersKey,
	) -> Result<Self::Success, RuntimeOrigin> {
		match key {
			RuntimeParametersKey::Storage(_) => {
				frame_system::ensure_root(origin.clone()).map_err(|_| origin)?;
				return Ok(())
			},
			RuntimeParametersKey::Contract(_) => {
				frame_system::ensure_root(origin.clone()).map_err(|_| origin)?;
				return Ok(())
			},
		}
	}

	#[cfg(feature = "runtime-benchmarks")]
	fn try_successful_origin(_key: &RuntimeParametersKey) -> Result<RuntimeOrigin, ()> {
		Ok(RuntimeOrigin::Root)
	}
}
```

---------

Signed-off-by: default avatarOliver Tale-Yazdi <[email protected]>
Co-authored-by: default avatarNikhil Gupta <[email protected]>
Co-authored-by: default avatarKian Paimani <[email protected]>
Co-authored-by: command-bot <>
      e53ebd8c
  23. Feb 06, 2024
    • Squirrel's avatar
      sp-std -> core (#3199) · bc2e5e1f
      Squirrel authored 
      First in a series of PRs that reduces our use of sp-std with a view to
deprecating it.

This is just looking at /substrate and moving some of the references
from `sp-std` to `core`.
These particular changes should be uncontroversial.

Where macros are used `::core` should be used to remove any ambiguity.

part of https://github.com/paritytech/polkadot-sdk/issues/2101
      bc2e5e1f
  25. Jan 31, 2024
    • Pablo Andrés Dorado Suárez's avatar
      [Documentation] Add description for VoteTally's methods (#3140) · 8a8f6f98
      Pablo Andrés Dorado Suárez authored 
      # Description

While methods' names on [`VoteTally`][1] trait might be self-explanatory
at first sight, the distinction between `support` and `approval` can be
a bit ambiguous for some readers. This PR aims to clarify the
distinction and inform about the expected values for every not yet
documented method on this trait.

# Checklist

- [x] My PR includes a detailed description as outlined in the
"Description" section above
- [ ] My PR follows the [labeling requirements](CONTRIBUTING.md#Process)
of this project (at minimum one label for `T`
  required)
- [x] I have made corresponding changes to the documentation (if
applicable)
- [x] I have added tests that prove my fix is effective or that my
feature works (if applicable)

[1]:
https://docs.rs/frame-support/latest/frame_support/traits/trait.VoteTally.html



---------

Co-authored-by: default avatarBastian Köcher <[email protected]>
      8a8f6f98
    • Oliver Tale-Yazdi's avatar
      [FRAME] Make `core-fellowship` ans `salary` work for swapped members (#3156) · 07e55006
      Oliver Tale-Yazdi authored 
      Fixup for https://github.com/paritytech/polkadot-sdk/pull/2587 to make
the `core-fellowship` crate work with swapped members.

Adds a `MemberSwappedHandler` to the `ranked-collective` pallet that are
implemented by `core-fellowship+salary`.
There is are exhaustive tests
[here](https://github.com/paritytech/polkadot-sdk/blob/72aa7ac17a0e5b16faab5d2992aa2db2e01b05d0/substrate/frame/core-fellowship/src/tests/integration.rs#L338)
and
[here](https://github.com/paritytech/polkadot-sdk/blob/ab3cdb05a5ebc1ff841f8dda67edef0ea40bbba5/substrate/frame/salary/src/tests/integration.rs#L224

)
to check that adding member `1` is equivalent to adding member `0` and
then swapping.

---------

Signed-off-by: default avatarOliver Tale-Yazdi <[email protected]>
      07e55006
    • Branislav Kontur's avatar
      Addressing Liam's comments from https://github.com/paritytech/polkadot-sdk/pull/2657 (#3150) · a03ef279
      Branislav Kontur authored
      a03ef279
    • Branislav Kontur's avatar
      [frame] `#[pallet::composite_enum]` improved variant count handling + removed... · bb8ddc46
      Branislav Kontur authored 
      [frame] `#[pallet::composite_enum]` improved variant count handling + removed `pallet_balances`'s `MaxHolds` config (#2657)

I started this investigation/issue based on @liamaharon question
[here](https://github.com/paritytech/polkadot-sdk/pull/1801#discussion_r1410452499).

## Problem

The `pallet_balances` integrity test should correctly detect that the
runtime has correct distinct `HoldReasons` variant count. I assume the
same situation exists for RuntimeFreezeReason.

It is not a critical problem, if we set `MaxHolds` with a sufficiently
large value, everything should be ok. However, in this case, the
integrity_test check becomes less useful.

**Situation for "any" runtime:**
- `HoldReason` enums from different pallets:
```rust
        /// from pallet_nis
        #[pallet::composite_enum]
	pub enum HoldReason {
		NftReceipt,
	}

        /// from pallet_preimage
        #[pallet::composite_enum]
	pub enum HoldReason {
		Preimage,
	}

        // from pallet_state-trie-migration
        #[pallet::composite_enum]
	pub enum HoldReason {
		SlashForContinueMigrate,
		SlashForMigrateCustomTop,
		SlashForMigrateCustomChild,
	}
```

- generated `RuntimeHoldReason` enum looks like:
```rust
pub enum RuntimeHoldReason {

    #[codec(index = 32u8)]
    Preimage(pallet_preimage::HoldReason),

    #[codec(index = 38u8)]
    Nis(pallet_nis::HoldReason),

    #[codec(index = 42u8)]
    StateTrieMigration(pallet_state_trie_migration::HoldReason),
}
```

- composite enum `RuntimeHoldReason` variant count is detected as `3`
- we set `type MaxHolds = ConstU32<3>`
- `pallet_balances::integrity_test` is ok with `3`(at least 3)

However, the real problem can occur in a live runtime where some
functionality might stop working. This is due to a total of 5 distinct
hold reasons (for pallets with multi-instance support, it is even more),
and not all of them can be used because of an incorrect `MaxHolds`,
which is deemed acceptable according to the `integrity_test`:
  ```
  // pseudo-code - if we try to call all of these:

T::Currency::hold(&pallet_nis::HoldReason::NftReceipt.into(),
&nft_owner, deposit)?;
T::Currency::hold(&pallet_preimage::HoldReason::Preimage.into(),
&nft_owner, deposit)?;

T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForContinueMigrate.into(),
&nft_owner, deposit)?;

  // With `type MaxHolds = ConstU32<3>` these two will fail

T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomTop.into(),
&nft_owner, deposit)?;

T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomChild.into(),
&nft_owner, deposit)?;
  ```  


## Solutions

A macro `#[pallet::*]` expansion is extended of `VariantCount`
implementation for the `#[pallet::composite_enum]` enum type. This
expansion generates the `VariantCount` implementation for pallets'
`HoldReason`, `FreezeReason`, `LockId`, and `SlashReason`. Enum variants
must be plain enum values without fields to ensure a deterministic
count.

The composite runtime enum, `RuntimeHoldReason` and
`RuntimeFreezeReason`, now sets `VariantCount::VARIANT_COUNT` as the sum
of pallets' enum `VariantCount::VARIANT_COUNT`:
```rust
#[frame_support::pallet(dev_mode)]
mod module_single_instance {

	#[pallet::composite_enum]
	pub enum HoldReason {
		ModuleSingleInstanceReason1,
		ModuleSingleInstanceReason2,
	}
...
}

#[frame_support::pallet(dev_mode)]
mod module_multi_instance {

	#[pallet::composite_enum]
	pub enum HoldReason<I: 'static = ()> {
		ModuleMultiInstanceReason1,
		ModuleMultiInstanceReason2,
		ModuleMultiInstanceReason3,
	}
...
}


impl self::sp_api_hidden_includes_construct_runtime::hidden_include::traits::VariantCount
    for RuntimeHoldReason
{
    const VARIANT_COUNT: u32 = 0
        + module_single_instance::HoldReason::VARIANT_COUNT
        + module_multi_instance::HoldReason::<module_multi_instance::Instance1>::VARIANT_COUNT
        + module_multi_instance::HoldReason::<module_multi_instance::Instance2>::VARIANT_COUNT
        + module_multi_instance::HoldReason::<module_multi_instance::Instance3>::VARIANT_COUNT;
}
```

In addition, `MaxHolds` is removed (as suggested
[here](https://github.com/paritytech/polkadot-sdk/pull/2657#discussion_r1443324573))
from `pallet_balances`, and its `Holds` are now bounded to
`RuntimeHoldReason::VARIANT_COUNT`. Therefore, there is no need to let
the runtime specify `MaxHolds`.


## For reviewers

Relevant changes can be found here:
- `substrate/frame/support/procedural/src/lib.rs` 
-  `substrate/frame/support/procedural/src/pallet/parse/composite.rs`
-  `substrate/frame/support/procedural/src/pallet/expand/composite.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/composite_helper.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/hold_reason.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/freeze_reason.rs`
- `substrate/frame/support/src/traits/misc.rs`

And the rest of the files is just about removed `MaxHolds` from
`pallet_balances`

## Next steps

Do the same for `MaxFreezes`
https://github.com/paritytech/polkadot-sdk/issues/2997

.

---------

Co-authored-by: command-bot <>
Co-authored-by: default avatarBastian Köcher <[email protected]>
Co-authored-by: default avatarDónal Murray <[email protected]>
Co-authored-by: default avatargupnik <[email protected]>
      bb8ddc46
  27. Jan 30, 2024
  29. Jan 27, 2024
    • Adel Arja's avatar
      Add `(Partial)OrdNoBound` derive macros (#2256) · 25eaa95f
      Adel Arja authored 
      This PR is related to
[this](https://github.com/paritytech/polkadot-sdk/issues/154) issue.

The idea is to add `OrdNoBound` and `PartialOrdNoBound` macros to the
substrate `*NoBound` macros.

closes #2198 
✄
-----------------------------------------------------------------------------

Thank you for your Pull Request! 🙏 Please make sure it follows the
contribution guidelines outlined in
[this
document](https://github.com/paritytech/polkadot-sdk/blob/master/docs/CONTRIBUTING.md)
and fill
out the sections below. Once you're ready to submit your PR for review,
please
delete this section and leave only the text under the "Description"
heading.

# Description

*Please include a summary of the changes and the related issue. Please
also include relevant motivation and context,
including:*

- What does this PR do?
- Why are these changes needed?
- How were these changes implemented and what do they affect?

*Use [Github semantic

linking](https://docs.github.com/en/issues/tracking-your-work-with-issues/linking-a-pull-request-to-an-issue#linking-a-pull-request-to-an-issue-using-a-keyword

)
to address any open issues this PR relates to or closes.*

Fixes # (issue number, *if applicable*)

Closes # (issue number, *if applicable*)

# Checklist

- [ ] My PR includes a detailed description as outlined in the
"Description" section above
- [ ] My PR follows the [labeling requirements](CONTRIBUTING.md#Process)
of this project (at minimum one label for `T`
  required)
- [ ] I have made corresponding changes to the documentation (if
applicable)
- [ ] I have added tests that prove my fix is effective or that my
feature works (if applicable)

You can remove the "Checklist" section once all have been checked. Thank
you for your contribution!

✄
-----------------------------------------------------------------------------

---------

Signed-off-by: default avatarOliver Tale-Yazdi <[email protected]>
Co-authored-by: default avatarOliver Tale-Yazdi <[email protected]>
Co-authored-by: command-bot <>
      25eaa95f
  31. Jan 26, 2024
  33. Jan 24, 2024
  35. Jan 23, 2024
    • Niklas Adolfsson's avatar
      rpc: backpressured RPC server (bump jsonrpsee 0.20) (#1313) · e16ef086
      Niklas Adolfsson authored 
      This is a rather big change in jsonrpsee, the major things in this bump
are:
- Server backpressure (the subscription impls are modified to deal with
that)
- Allow custom error types / return types (remove jsonrpsee::core::Error
and jsonrpee::core::CallError)
- Bug fixes (graceful shutdown in particular not used by substrate
anyway)
   - Less dependencies for the clients in particular
   - Return type requires Clone in method call responses
   - Moved to tokio channels
   - Async subscription API (not used in this PR)

Major changes in this PR:
- The subscriptions are now bounded and if subscription can't keep up
with the server it is dropped
- CLI: add parameter to configure the jsonrpc server bounded message
buffer (default is 64)
- Add our own subscription helper to deal with the unbounded streams in
substrate

The most important things in this PR to review is the added helpers
functions in `substrate/client/rpc/src/utils.rs` and the rest is pretty
much chore.

Regarding the "bounded buffer limit" it may cause the server to handle
the JSON-RPC calls
slower than before.

The message size limit is bounded by "--rpc-response-size" thus "by
default 10MB * 64 = 640MB"
but the subscription message size is not covered by this limit and could
be capped as well.

Hopefully the last release prior to 1.0, sorry in advance for a big PR

Previous attempt: https://github.com/paritytech/substrate/pull/13992

Resolves https://github.com/paritytech/polkadot-sdk/issues/748, resolves
https://github.com/paritytech/polkadot-sdk/issues/627
      e16ef086
  37. Jan 22, 2024
  39. Jan 19, 2024
  41. Jan 18, 2024
  43. Jan 16, 2024
    • Francisco Aguirre's avatar
      XCMv4 (#1230) · 8428f678
      Francisco Aguirre authored 
      

# Note for reviewer

Most changes are just syntax changes necessary for the new version.
Most important files should be the ones under the `xcm` folder.

# Description 

Added XCMv4.

## Removed `Multi` prefix
The following types have been renamed:
- MultiLocation -> Location
- MultiAsset -> Asset
- MultiAssets -> Assets
- InteriorMultiLocation -> InteriorLocation
- MultiAssetFilter -> AssetFilter
- VersionedMultiAsset -> VersionedAsset
- WildMultiAsset -> WildAsset
- VersionedMultiLocation -> VersionedLocation

In order to fix a name conflict, the `Assets` in `xcm-executor` were
renamed to `HoldingAssets`, as they represent assets in holding.

## Removed `Abstract` asset id

It was not being used anywhere and this simplifies the code.

Now assets are just constructed as follows:

```rust
let asset: Asset = (AssetId(Location::new(1, Here)), 100u128).into();
```

No need for specifying `Concrete` anymore.

## Outcome is now a named fields struct

Instead of

```rust
pub enum Outcome {
  Complete(Weight),
  Incomplete(Weight, Error),
  Error(Error),
}
```

we now have

```rust
pub enum Outcome {
  Complete { used: Weight },
  Incomplete { used: Weight, error: Error },
  Error { error: Error },
}
```

## Added Reanchorable trait

Now both locations and assets implement this trait, making it easier to
reanchor both.

## New syntax for building locations and junctions

Now junctions are built using the following methods:

```rust
let location = Location {
    parents: 1,
    interior: [Parachain(1000), PalletInstance(50), GeneralIndex(1984)].into()
};
```

or

```rust
let location = Location::new(1, [Parachain(1000), PalletInstance(50), GeneralIndex(1984)]);
```

And they are matched like so:

```rust
match location.unpack() {
  (1, [Parachain(id)]) => ...
  (0, Here) => ...,
  (1, [_]) => ...,
}
```

This syntax is mandatory in v4, and has been also implemented for v2 and
v3 for easier migration.

This was needed to make all sizes smaller.

# TODO
- [x] Scaffold v4
- [x] Port github.com/paritytech/polkadot/pull/7236
- [x] Remove `Multi` prefix
- [x] Remove `Abstract` asset id

---------

Co-authored-by: command-bot <>
Co-authored-by: default avatarKeith Yeung <[email protected]>
      8428f678
    • Xavier Lau's avatar
      CI check features (#1708) · 05cfb02b
      Xavier Lau authored 
      To resolve issue #1136.

This is a cross verification against zepter.

- [cargo-featalign](https://github.com/hack-ink/cargo-featalign):
Verifies the proper propagation of all features.
- [zepter](https://github.com/ggwpez/zepter): Checks for accidentally
enabled features.

cc @ggwpez

 

---
Switch to a new branch. Original PR #1537.

---------

Signed-off-by: default avatarXavier Lau <[email protected]>
Signed-off-by: default avatarOliver Tale-Yazdi <[email protected]>
Co-authored-by: default avatarOliver Tale-Yazdi <[email protected]>
Co-authored-by: default avatarChevdor <[email protected]>
      05cfb02b
  45. Jan 15, 2024
    • Liam Aharon's avatar
      Unbalanced and Balanced fungible conformance tests, and fungible fixes (#1296) · 46090ff1
      Liam Aharon authored 
      Original PR https://github.com/paritytech/substrate/pull/14655

---

Partial https://github.com/paritytech/polkadot-sdk/issues/225

- [x] Adds conformance tests for Unbalanced
- [x] Adds conformance tests for Balanced
- Several minor fixes to fungible default implementations and the
Balances pallet
- [x] `Unbalanced::decrease_balance` can reap account when
`Preservation` is `Preserve`
- [x] `Balanced::pair` can return pairs of imbalances which do not
cancel each other out
   - [x] Balances pallet `active_issuance` 'underflow'
- [x] Refactors the conformance test file structure to match the
fungible file structure: tests for traits in regular.rs go into a test
file named regular.rs, tests for traits in freezes.rs go into a test
file named freezes.rs, etc.
 - [x] Improve doc comments
 - [x] Simplify macros

## Fixes

### `Unbalanced::decrease_balance` can reap account when called with
`Preservation::Preserve`
There is a potential issue in the default implementation of
`Unbalanced::decrease_balance`. The implementation can delete an account
even when it is called with `preservation: Preservation::Preserve`. This
seems to contradict the documentation of `Preservation::Preserve`:

```rust
	/// The account may not be killed and our provider reference must remain (in the context of
	/// tokens, this means that the account may not be dusted).
	Preserve,
```

I updated `Unbalanced::decrease_balance` to return
`Err(TokenError::BelowMinimum)` when a withdrawal would cause the
account to be reaped and `preservation: Preservation::Preserve`.

- [ ] TODO Confirm with @gavofyork that this is correct behavior

Test for this behavior:


https://github.com/paritytech/polkadot-sdk/blob/e5c876dd6b59e2b7dbacaa4538cb42c802db3730/substrate/frame/support/src/traits/tokens/fungible/conformance_tests/regular.rs#L912-L937

### `Balanced::pair` returning non-canceling pairs

`Balanced::pair` is supposed to create a pair of imbalances that cancel
each other out. However this is not the case when the method is called
with an amount greater than the total supply.

In the existing default implementation, `Balanced::pair` creates a pair
by first rescinding the balance, creating `Debt`, and then issuing the
balance, creating `Credit`.

When creating `Debt`, if the amount to create exceeds the
`total_supply`, `total_supply` units of `Debt` are created *instead* of
`amount` units of `Debt`. This can lead to non-canceling amount of
`Credit` and `Debt` being created.

To address this, I create the credit and debt directly in the method
instead of calling `issue` and `rescind`.

Test for this behavior:


https://github.com/paritytech/polkadot-sdk/blob/e5c876dd6b59e2b7dbacaa4538cb42c802db3730/substrate/frame/support/src/traits/tokens/fungible/conformance_tests/regular.rs#L1323-L1346

### `Balances` pallet `active_issuance` 'underflow'

This PR resolves an issue in the `Balances` pallet that can lead to odd
behavior of `active_issuance`.

Currently, the Balances pallet doesn't check if `InactiveIssuance`
remains less than or equal to `TotalIssuance` when supply is
deactivated. This allows `InactiveIssuance` to be greater than
`TotalIssuance`, which can result in unexpected behavior from the
perspective of the fungible API.

`active_issuance` is derived from
`TotalIssuance.saturating_sub(InactiveIssuance)`.

If an `amount` is deactivated that causes `InactiveIssuance` to become
greater TotalIssuance, `active_issuance` will return 0. However once in
that state, reactivating an amount will not increase `active_issuance`
by the reactivated `amount` as expected.

Consider this test where the last assertion would fail due to this
issue:


https://github.com/paritytech/polkadot-sdk/blob/e5c876dd6b59e2b7dbacaa4538cb42c802db3730/substrate/frame/support/src/traits/tokens/fungible/conformance_tests/regular.rs#L1036-L1071



To address this, I've modified the `deactivate` function to ensure
`InactiveIssuance` never surpasses `TotalIssuance`.

---------

Co-authored-by: default avatarMuharem <[email protected]>
      46090ff1
  47. Jan 13, 2024
  49. Jan 11, 2024
    • Michal Kucharczyk's avatar
      frame-support: sp-runtime dependency updated (serde) (#2907) · c8112e2c
      Michal Kucharczyk authored 
      `frame-support` crate compilation fails (reported by @koute):

```
$ cargo check --no-default-features --target=wasm32-unknown-unknown

error[E0277]: the trait bound `GC: Serialize` is not satisfied
    --> substrate/frame/support/src/genesis_builder_helper.rs:32:24
     |
32   |     serde_json::to_string(&GC::default())
     |     --------------------- ^^^^^^^^^^^^^^ the trait `Serialize` is not implemented for `GC`
     |     |
     |     required by a bound introduced by this call
     |
note: required by a bound in `serde_json::to_string`
    --> /home/kou/.cargo/registry/src/index.crates.io-6f17d22bba15001f/serde_json-1.0.111/src/ser.rs:2209:17
     |
2207 | pub fn to_string<T>(value: &T) -> Result<String>
     |        --------- required by a bound in this function
2208 | where
2209 |     T: ?Sized + Serialize,
     |                 ^^^^^^^^^ required by this bound in `to_string`
help: consider further restricting this bound
     |
30   |     GC: BuildGenesisConfig + Default + serde::Serialize,
     |                                      ++++++++++++++++++
```

This PR should fix this.

For all runtimes `sp-runtime/serde` feature was likely enabled by this
(and few other pallets):

https://github.com/paritytech/polkadot-sdk/blob/f2a750ee86e72c9ab677aaf588d0a33ee8446bef/substrate/frame/system/Cargo.toml#L27
      c8112e2c
  51. Jan 10, 2024
  53. Jan 09, 2024
  55. Jan 08, 2024
  57. Jan 07, 2024
  59. Jan 05, 2024