Skip to content
  1. Feb 28, 2024
    • Oliver Tale-Yazdi's avatar
      Multi-Block-Migrations, `poll` hook and new System callbacks (#1781) · eefd5fe4
      Oliver Tale-Yazdi authored
      
      
      This MR is the merge of
      https://github.com/paritytech/substrate/pull/14414 and
      https://github.com/paritytech/substrate/pull/14275. It implements
      [RFC#13](https://github.com/polkadot-fellows/RFCs/pull/13), closes
      https://github.com/paritytech/polkadot-sdk/issues/198.
      
      ----- 
      
      This Merge request introduces three major topicals:
      
      1. Multi-Block-Migrations
      1. New pallet `poll` hook for periodic service work
      1. Replacement hooks for `on_initialize` and `on_finalize` in cases
      where `poll` cannot be used
      
      and some more general changes to FRAME.  
      The changes for each topical span over multiple crates. They are listed
      in topical order below.
      
      # 1.) Multi-Block-Migrations
      
      Multi-Block-Migrations are facilitated by creating `pallet_migrations`
      and configuring `System::Config::MultiBlockMigrator` to point to it.
      Executive picks this up and triggers one step of the migrations pallet
      per block.
      The chain is in lockdown mode for as long as an MBM is ongoing.
      Executive does this by polling `MultiBlockMigrator::ongoing` and not
      allowing any transaction in a block, if true.
      
      A MBM is defined through trait `SteppedMigration`. A condensed version
      looks like this:
      ```rust
      /// A migration that can proceed in multiple steps.
      pub trait SteppedMigration {
      	type Cursor: FullCodec + MaxEncodedLen;
      	type Identifier: FullCodec + MaxEncodedLen;
      
      	fn id() -> Self::Identifier;
      
      	fn max_steps() -> Option<u32>;
      
      	fn step(
      		cursor: Option<Self::Cursor>,
      		meter: &mut WeightMeter,
      	) -> Result<Option<Self::Cursor>, SteppedMigrationError>;
      }
      ```
      
      `pallet_migrations` can be configured with an aggregated tuple of these
      migrations. It then starts to migrate them one-by-one on the next
      runtime upgrade.
      Two things are important here:
      - 1. Doing another runtime upgrade while MBMs are ongoing is not a good
      idea and can lead to messed up state.
      - 2. **Pallet Migrations MUST BE CONFIGURED IN `System::Config`,
      otherwise it is not used.**
      
      The pallet supports an `UpgradeStatusHandler` that can be used to notify
      external logic of upgrade start/finish (for example to pause XCM
      dispatch).
      
      Error recovery is very limited in the case that a migration errors or
      times out (exceeds its `max_steps`). Currently the runtime dev can
      decide in `FailedMigrationHandler::failed` how to handle this. One
      follow-up would be to pair this with the `SafeMode` pallet and enact
      safe mode when an upgrade fails, to allow governance to rescue the
      chain. This is currently not possible, since governance is not
      `Mandatory`.
      
      ## Runtime API
      
      - `Core`: `initialize_block` now returns `ExtrinsicInclusionMode` to
      inform the Block Author whether they can push transactions.
      
      ### Integration
      
      Add it to your runtime implementation of `Core` and `BlockBuilder`:
      ```patch
      diff --git a/runtime/src/lib.rs b/runtime/src/lib.rs
      @@ impl_runtime_apis! {
      	impl sp_block_builder::Core<Block> for Runtime {
      -		fn initialize_block(header: &<Block as BlockT>::Header) {
      +		fn initialize_block(header: &<Block as BlockT>::Header) -> RuntimeExecutiveMode {
      			Executive::initialize_block(header)
      		}
      
      		...
      	}
      ```
      
      # 2.) `poll` hook
      
      A new pallet hook is introduced: `poll`. `Poll` is intended to replace
      mostly all usage of `on_initialize`.
      The reason for this is that any code that can be called from
      `on_initialize` cannot be migrated through an MBM. Currently there is no
      way to statically check this; the implication is to use `on_initialize`
      as rarely as possible.
      Failing to do so can result in broken storage invariants.
      
      The implementation of the poll hook depends on the `Runtime API` changes
      that are explained above.
      
      # 3.) Hard-Deadline callbacks
      
      Three new callbacks are introduced and configured on `System::Config`:
      `PreInherents`, `PostInherents` and `PostTransactions`.
      These hooks are meant as replacement for `on_initialize` and
      `on_finalize` in cases where the code that runs cannot be moved to
      `poll`.
      The reason for this is to make the usage of HD-code (hard deadline) more
      explicit - again to prevent broken invariants by MBMs.
      
      # 4.) FRAME (general changes)
      
      ## `frame_system` pallet
      
      A new memorize storage item `InherentsApplied` is added. It is used by
      executive to track whether inherents have already been applied.
      Executive and can then execute the MBMs directly between inherents and
      transactions.
      
      The `Config` gets five new items:
      - `SingleBlockMigrations` this is the new way of configuring migrations
      that run in a single block. Previously they were defined as last generic
      argument of `Executive`. This shift is brings all central configuration
      about migrations closer into view of the developer (migrations that are
      configured in `Executive` will still work for now but is deprecated).
      - `MultiBlockMigrator` this can be configured to an engine that drives
      MBMs. One example would be the `pallet_migrations`. Note that this is
      only the engine; the exact MBMs are injected into the engine.
      - `PreInherents` a callback that executes after `on_initialize` but
      before inherents.
      - `PostInherents` a callback that executes after all inherents ran
      (including MBMs and `poll`).
      - `PostTransactions` in symmetry to `PreInherents`, this one is called
      before `on_finalize` but after all transactions.
      
      A sane default is to set all of these to `()`. Example diff suitable for
      any chain:
      ```patch
      @@ impl frame_system::Config for Test {
       	type MaxConsumers = ConstU32<16>;
      +	type SingleBlockMigrations = ();
      +	type MultiBlockMigrator = ();
      +	type PreInherents = ();
      +	type PostInherents = ();
      +	type PostTransactions = ();
       }
      ```
      
      An overview of how the block execution now looks like is here. The same
      graph is also in the rust doc.
      
      <details><summary>Block Execution Flow</summary>
      <p>
      
      ![Screenshot 2023-12-04 at 19 11
      29](https://github.com/paritytech/polkadot-sdk/assets/10380170/e88a80c4-ef11-4faa-8df5-8b33a724c054)
      
      </p>
      </details> 
      
      ## Inherent Order
      
      Moved to https://github.com/paritytech/polkadot-sdk/pull/2154
      
      ---------------
      
      
      ## TODO
      
      - [ ] Check that `try-runtime` still works
      - [ ] Ensure backwards compatibility with old Runtime APIs
      - [x] Consume weight correctly
      - [x] Cleanup
      
      ---------
      
      Signed-off-by: default avatarOliver Tale-Yazdi <[email protected]>
      Co-authored-by: default avatarLiam Aharon <[email protected]>
      Co-authored-by: default avatarJuan Girini <[email protected]>
      Co-authored-by: command-bot <>
      Co-authored-by: default avatarFrancisco Aguirre <[email protected]>
      Co-authored-by: default avatarGavin Wood <[email protected]>
      Co-authored-by: default avatarBastian Köcher <[email protected]>
      eefd5fe4
  2. Feb 23, 2024
  3. Feb 22, 2024
  4. Feb 20, 2024
    • Niklas Adolfsson's avatar
      rpc server: make possible to disable/enable batch requests (#3364) · fee810a5
      Niklas Adolfsson authored
      The rationale behind this, is that it may be useful for some users
      actually disable RPC batch requests or limit them by length instead of
      the total size bytes of the batch.
      
      This PR adds two new CLI options:
      
      ```
      --rpc-disable-batch-requests - disable batch requests on the server
      --rpc-max-batch-request-len <LEN> - limit batches to LEN on the server.
      ```
      fee810a5
    • Oliver Tale-Yazdi's avatar
      Lift dependencies to the workspace (Part 2/x) (#3366) · e89d0fca
      Oliver Tale-Yazdi authored
      
      
      Lifting some more dependencies to the workspace. Just using the
      most-often updated ones for now.
      It can be reproduced locally.
      
      ```sh
      # First you can check if there would be semver incompatible bumps (looks good in this case):
      $ zepter transpose dependency lift-to-workspace --ignore-errors syn quote thiserror "regex:^serde.*"
      
      # Then apply the changes:
      $ zepter transpose dependency lift-to-workspace --version-resolver=highest syn quote thiserror "regex:^serde.*" --fix
      
      # And format the changes:
      $ taplo format --config .config/taplo.toml
      ```
      
      ---------
      
      Signed-off-by: default avatarOliver Tale-Yazdi <[email protected]>
      e89d0fca
  5. Feb 19, 2024
    • dependabot[bot]'s avatar
      Bump the known_good_semver group with 1 update (#3379) · 3168ed4d
      dependabot[bot] authored
      
      
      Bumps the known_good_semver group with 1 update:
      [clap](https://github.com/clap-rs/clap).
      
      Updates `clap` from 4.5.0 to 4.5.1
      <details>
      <summary>Release notes</summary>
      <p><em>Sourced from <a
      href="https://github.com/clap-rs/clap/releases">clap's
      releases</a>.</em></p>
      <blockquote>
      <h2>v4.5.1</h2>
      <h2>[4.5.1] - 2024-02-16</h2>
      <h3>Fixes</h3>
      <ul>
      <li><em>(error)</em> Include suggestion to add <code>--</code> even if
      there is a &quot;did you mean&quot; so long as <code>last</code> or
      <code>trailing_var_arg</code> is used</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Changelog</summary>
      <p><em>Sourced from <a
      href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
      changelog</a>.</em></p>
      <blockquote>
      <h2>[4.5.1] - 2024-02-16</h2>
      <h3>Fixes</h3>
      <ul>
      <li><em>(error)</em> Include suggestion to add <code>--</code> even if
      there is a &quot;did you mean&quot; so long as <code>last</code> or
      <code>trailing_var_arg</code> is used</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Commits</summary>
      <ul>
      <li><a
      href="https://github.com/clap-rs/clap/commit/0c01b5558de0a1a513a2af429981099e550d1a78"><code>0c01b55</code></a>
      chore: Release</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/08e0b5bde4b45567be98d12e7d394762fa8da6a4"><code>08e0b5b</code></a>
      docs: Update changelog</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/f2c4e6ec740cce29cea3fd7232e4d2716f089fc2"><code>f2c4e6e</code></a>
      Merge pull request <a
      href="https://redirect.github.com/clap-rs/clap/issues/5359">#5359</a>
      from poliorcetics/ab/push-szymvyzpmnqx</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/e782775229081697e47d340a155d6b087eeb46f8"><code>e782775</code></a>
      fix(complete): Handle newlines in command/arg descriptions</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/fba7c8597bf3028400d6f6a22d83cedb7a2bd5a5"><code>fba7c85</code></a>
      test(complete): Show newline issue</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/8a7a13a5618cfdc4ff328624a5266e7b4d88649a"><code>8a7a13a</code></a>
      chore: Release</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/7b3a3e1e5eee57fc37110343b980cbe8170d20ad"><code>7b3a3e1</code></a>
      docs: Update changelog</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/7b624ca74336f6f14f01007b9039990d53acda0f"><code>7b624ca</code></a>
      Merge pull request <a
      href="https://redirect.github.com/clap-rs/clap/issues/5356">#5356</a>
      from epage/escape</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/446328a8d3cdaac28884bf8fdfcc85f35c8b5134"><code>446328a</code></a>
      fix(error): Include -- in more cases</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/7de6df878238ca8e3d9723bb9650f7fe9470d8bd"><code>7de6df8</code></a>
      test(error): Show existing last behavior</li>
      <li>Additional commits viewable in <a
      href="https://github.com/clap-rs/clap/compare/clap_complete-v4.5.0...clap_complete-v4.5.1">compare
      view</a></li>
      </ul>
      </details>
      <br />
      
      
      [![Dependabot compatibility
      score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=clap&package-manager=cargo&previous-version=4.5.0&new-version=4.5.1)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
      
      Dependabot will resolve any conflicts with this PR as long as you don't
      alter it yourself. You can also trigger a rebase manually by commenting
      `@dependabot rebase`.
      
      [//]: # (dependabot-automerge-start)
      [//]: # (dependabot-automerge-end)
      
      ---
      
      <details>
      <summary>Dependabot commands and options</summary>
      <br />
      
      You can trigger Dependabot actions by commenting on this PR:
      - `@dependabot rebase` will rebase this PR
      - `@dependabot recreate` will recreate this PR, overwriting any edits
      that have been made to it
      - `@dependabot merge` will merge this PR after your CI passes on it
      - `@dependabot squash and merge` will squash and merge this PR after
      your CI passes on it
      - `@dependabot cancel merge` will cancel a previously requested merge
      and block automerging
      - `@dependabot reopen` will reopen this PR if it is closed
      - `@dependabot close` will close this PR and stop Dependabot recreating
      it. You can achieve the same result by closing it manually
      - `@dependabot show <dependency name> ignore conditions` will show all
      of the ignore conditions of the specified dependency
      - `@dependabot ignore <dependency name> major version` will close this
      group update PR and stop Dependabot creating any more for the specific
      dependency's major version (unless you unignore this specific
      dependency's major version or upgrade to it yourself)
      - `@dependabot ignore <dependency name> minor version` will close this
      group update PR and stop Dependabot creating any more for the specific
      dependency's minor version (unless you unignore this specific
      dependency's minor version or upgrade to it yourself)
      - `@dependabot ignore <dependency name>` will close this group update PR
      and stop Dependabot creating any more for the specific dependency
      (unless you unignore this specific dependency or upgrade to it yourself)
      - `@dependabot unignore <dependency name>` will remove all of the ignore
      conditions of the specified dependency
      - `@dependabot unignore <dependency name> <ignore condition>` will
      remove the ignore condition of the specified dependency and ignore
      conditions
      
      
      </details>
      
      Signed-off-by: default avatardependabot[bot] <[email protected]>
      Co-authored-by: default avatardependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
      3168ed4d
  6. Feb 17, 2024
  7. Feb 16, 2024
    • Dónal Murray's avatar
      Add broker pallet to `coretime-westend` (#3272) · 99234440
      Dónal Murray authored
      
      
      This brings functionality to Westend's Coretime Chain runtime, where
      previously it was not much more than a shell.
      
      It is assumed that the Coretime pallet will have the same index in the
      Westend runtime as it does in Rococo for the runtime calls.
      
      TODO:
      - [x] Generate chainspec
      - [x] Regenerate weights
      - [x] Check hardcoded RuntimeCall weights against relay weights for
      transacts
      
      Aura key generation: https://github.com/paritytech/devops/issues/2725
      
      ---------
      
      Co-authored-by: command-bot <>
      Co-authored-by: default avatarBastian Köcher <[email protected]>
      Co-authored-by: default avatarAnton Vilhelm Ásgeirsson <[email protected]>
      99234440
    • dependabot[bot]'s avatar
      Bump the known_good_semver group with 6 updates (#3347) · 4b484e6a
      dependabot[bot] authored
      
      
      Bumps the known_good_semver group with 6 updates:
      
      | Package | From | To |
      | --- | --- | --- |
      | [serde](https://github.com/serde-rs/serde) | `1.0.195` | `1.0.196` |
      | [serde_json](https://github.com/serde-rs/json) | `1.0.111` | `1.0.113`
      |
      | [clap](https://github.com/clap-rs/clap) | `4.4.18` | `4.5.0` |
      | [syn](https://github.com/dtolnay/syn) | `2.0.48` | `2.0.49` |
      | [serde_yaml](https://github.com/dtolnay/serde-yaml) | `0.9.30` |
      `0.9.31` |
      | [serde_derive](https://github.com/serde-rs/serde) | `1.0.195` |
      `1.0.196` |
      
      Updates `serde` from 1.0.195 to 1.0.196
      <details>
      <summary>Release notes</summary>
      <p><em>Sourced from <a
      href="https://github.com/serde-rs/serde/releases">serde's
      releases</a>.</em></p>
      <blockquote>
      <h2>v1.0.196</h2>
      <ul>
      <li>Improve formatting of &quot;invalid type&quot; error messages
      involving floats (<a
      href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>)</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Commits</summary>
      <ul>
      <li><a
      href="https://github.com/serde-rs/serde/commit/ede9762a583c3cc3b87c10a53551828fad339525"><code>ede9762</code></a>
      Release 1.0.196</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/d438c2d67bf30e3edab31c2272c4829c12cf4cb5"><code>d438c2d</code></a>
      Merge pull request <a
      href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>
      from dtolnay/decimalpoint</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/bef110b92a171ac568a47339f5bd97938a8c9da2"><code>bef110b</code></a>
      Format Unexpected::Float with decimal point</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/b971ef11d1b53da7673e0c8199e87509c003c1a8"><code>b971ef1</code></a>
      Merge pull request <a
      href="https://redirect.github.com/serde-rs/serde/issues/2681">#2681</a>
      from dtolnay/workspacedeps</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/29d9f693996d199748136d5561a971ed68626724"><code>29d9f69</code></a>
      Fix workspace.dependencies default-features future compat warning</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/aecb4083bde754155752f5d7d442b64eb7dc636f"><code>aecb408</code></a>
      Sort workspace dependencies</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/1c675ab3a38e46df4e62465800970f8b20a2055d"><code>1c675ab</code></a>
      Merge pull request <a
      href="https://redirect.github.com/serde-rs/serde/issues/2678">#2678</a>
      from rodoufu/workspaceDependencies</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/dd619630a337139424725697ccd9a9f7596a2d3a"><code>dd61963</code></a>
      Adding workspace dependencies</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/111803ab0768d010c606f2fc0d0add12750d5eef"><code>111803a</code></a>
      Merge pull request <a
      href="https://redirect.github.com/serde-rs/serde/issues/2673">#2673</a>
      from Sky9x/msrv-badge</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/0024f74f34fbbdc44a7b22457faebe36c5cbe7f8"><code>0024f74</code></a>
      Use shields.io's MSRV badges</li>
      <li>See full diff in <a
      href="https://github.com/serde-rs/serde/compare/v1.0.195...v1.0.196">compare
      view</a></li>
      </ul>
      </details>
      <br />
      
      Updates `serde_json` from 1.0.111 to 1.0.113
      <details>
      <summary>Release notes</summary>
      <p><em>Sourced from <a
      href="https://github.com/serde-rs/json/releases">serde_json's
      releases</a>.</em></p>
      <blockquote>
      <h2>v1.0.113</h2>
      <ul>
      <li>Add <code>swap_remove</code> and <code>shift_remove</code> methods
      on Map (<a
      href="https://redirect.github.com/serde-rs/json/issues/1109">#1109</a>)</li>
      </ul>
      <h2>v1.0.112</h2>
      <ul>
      <li>Improve formatting of &quot;invalid type&quot; error messages
      involving floats (<a
      href="https://redirect.github.com/serde-rs/json/issues/1107">#1107</a>)</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Commits</summary>
      <ul>
      <li><a
      href="https://github.com/serde-rs/json/commit/09d865b34b9701be52764dc9bf571b1a16e9d3dc"><code>09d865b</code></a>
      Release 1.0.113</li>
      <li><a
      href="https://github.com/serde-rs/json/commit/5aeab4eaf69d7959f013f8081865c264d6c00551"><code>5aeab4e</code></a>
      Merge pull request <a
      href="https://redirect.github.com/serde-rs/json/issues/1109">#1109</a>
      from serde-rs/remove</li>
      <li><a
      href="https://github.com/serde-rs/json/commit/ca3c2ca3696cab79b8b279be7569ee1647250f1e"><code>ca3c2ca</code></a>
      Add swap_remove and shift_remove methods on Map</li>
      <li><a
      href="https://github.com/serde-rs/json/commit/7fece969e3b480ec620419d65c2aeb08776bebcb"><code>7fece96</code></a>
      Release 1.0.112</li>
      <li><a
      href="https://github.com/serde-rs/json/commit/6a6d2bbd9e8b8bd72573b863f12a4ec991f33232"><code>6a6d2bb</code></a>
      Merge pull request <a
      href="https://redirect.github.com/serde-rs/json/issues/1107">#1107</a>
      from serde-rs/unexpectedfloat</li>
      <li><a
      href="https://github.com/serde-rs/json/commit/83d7bad54ba5db3a44198d6df0ff2e81621683fa"><code>83d7bad</code></a>
      Format f64 in error messages using ryu</li>
      <li><a
      href="https://github.com/serde-rs/json/commit/107c2d1c42817f0d71f07a4d5b0ea2f29dbce8b8"><code>107c2d1</code></a>
      Merge pull request <a
      href="https://redirect.github.com/serde-rs/json/issues/1106">#1106</a>
      from serde-rs/invalidvalue</li>
      <li><a
      href="https://github.com/serde-rs/json/commit/62ca3e4c01c2e62cd5c2a32e9104f386e5ce7808"><code>62ca3e4</code></a>
      Handle Unexpected::Unit in Error::invalid_value</li>
      <li><a
      href="https://github.com/serde-rs/json/commit/296fafb8f32e8442ef8e4d5725c15ffca726b288"><code>296fafb</code></a>
      Factor out JSON-specific Display impl for serde::de::Unexpected</li>
      <li><a
      href="https://github.com/serde-rs/json/commit/e56cc696bd7c112e5dd4ccfa23d094c3a1c1c1ff"><code>e56cc69</code></a>
      Merge pull request <a
      href="https://redirect.github.com/serde-rs/json/issues/1105">#1105</a>
      from keienWang/master</li>
      <li>Additional commits viewable in <a
      href="https://github.com/serde-rs/json/compare/v1.0.111...v1.0.113">compare
      view</a></li>
      </ul>
      </details>
      <br />
      
      Updates `clap` from 4.4.18 to 4.5.0
      <details>
      <summary>Changelog</summary>
      <p><em>Sourced from <a
      href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
      changelog</a>.</em></p>
      <blockquote>
      <h2>[4.5.0] - 2024-02-08</h2>
      <h3>Compatibility</h3>
      <ul>
      <li>Update MSRV to 1.74</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Commits</summary>
      <ul>
      <li><a
      href="https://github.com/clap-rs/clap/commit/a751c5fe65cd33cb09e85ff3039b4fd0182cdb6e"><code>a751c5f</code></a>
      chore: Release</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/9ec6c942b81c370a8c14652e42295933244555ac"><code>9ec6c94</code></a>
      chore: Release</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/0735119775c2d27fef6b3c232cb9ef2fcbbd963f"><code>0735119</code></a>
      docs: Update changelog</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/c4d3959506f5068f86ffb7ab34b622bd2da40dd8"><code>c4d3959</code></a>
      Merge pull request <a
      href="https://redirect.github.com/clap-rs/clap/issues/5344">#5344</a>
      from epage/encode</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/f750e577789e1dd34c6950d8c8fe16d1bfd1f49c"><code>f750e57</code></a>
      fix(lex): Use new-ish OsStr API</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/1d9a554cdfddffcb92d197706b9720e2760cb443"><code>1d9a554</code></a>
      Merge pull request <a
      href="https://redirect.github.com/clap-rs/clap/issues/5343">#5343</a>
      from epage/msrv</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/4b45d361b1b96eb1f37b7d1db2684203ca828a94"><code>4b45d36</code></a>
      chore: Update MSRV to 1.74</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/55b1f945157d4d0e480dea6c492e04d0b541088a"><code>55b1f94</code></a>
      Merge pull request <a
      href="https://redirect.github.com/clap-rs/clap/issues/5342">#5342</a>
      from epage/divan</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/ea77b98da3f321069ae136a241a2d266c2b28bd7"><code>ea77b98</code></a>
      test(complete): Make it order independent</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/b0fea2bac60819bdb042e10c032817fded67f815"><code>b0fea2b</code></a>
      test(bench): Switch to divan</li>
      <li>Additional commits viewable in <a
      href="https://github.com/clap-rs/clap/compare/v4.4.18...clap_complete-v4.5.0">compare
      view</a></li>
      </ul>
      </details>
      <br />
      
      Updates `syn` from 2.0.48 to 2.0.49
      <details>
      <summary>Release notes</summary>
      <p><em>Sourced from <a
      href="https://github.com/dtolnay/syn/releases">syn's
      releases</a>.</em></p>
      <blockquote>
      <h2>2.0.49</h2>
      <ul>
      <li>Improve error location when parsing from an empty string literal
      using <code>LitStr::parse</code> (<a
      href="https://redirect.github.com/dtolnay/syn/issues/1590">#1590</a>)</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Commits</summary>
      <ul>
      <li><a
      href="https://github.com/dtolnay/syn/commit/e64c0636042bcd8cf56f9e6c3e828a49cb434649"><code>e64c063</code></a>
      Release 2.0.49</li>
      <li><a
      href="https://github.com/dtolnay/syn/commit/981359c5f46f25f3db42d1b341cc607f634688e7"><code>981359c</code></a>
      Merge pull request <a
      href="https://redirect.github.com/dtolnay/syn/issues/1590">#1590</a>
      from dtolnay/streof</li>
      <li><a
      href="https://github.com/dtolnay/syn/commit/51298d40a447b9e5b3cd8c898c2ea9d24b31cd6d"><code>51298d4</code></a>
      Improve error location at eof in LitStr::parse</li>
      <li><a
      href="https://github.com/dtolnay/syn/commit/270c63384a9d891f65880a03a5a92f0bf4605bbf"><code>270c633</code></a>
      Update test suite to nightly-2024-02-13</li>
      <li><a
      href="https://github.com/dtolnay/syn/commit/dc9cf16b9b0601d2d393d059c46a8f8e0220cc21"><code>dc9cf16</code></a>
      Remove FilterAttrs trait when unused</li>
      <li><a
      href="https://github.com/dtolnay/syn/commit/7dcfac79eda716fa806d68cc0aa811f3be717dc0"><code>7dcfac7</code></a>
      Ignore dead_code warning in test</li>
      <li><a
      href="https://github.com/dtolnay/syn/commit/98318441089f9a9bb596fc010ed14c3b593d4bda"><code>9831844</code></a>
      Update signature of Emitter::emit_diagnostic in nightly-2024-02-07</li>
      <li><a
      href="https://github.com/dtolnay/syn/commit/9e8033f63da93dfb6a3e698449c6edff5e56727d"><code>9e8033f</code></a>
      Update test suite to nightly-2024-02-07</li>
      <li><a
      href="https://github.com/dtolnay/syn/commit/cb3348cd94be50995054796facdfa055b6e0e9e8"><code>cb3348c</code></a>
      Update test suite to nightly-2024-01-23</li>
      <li><a
      href="https://github.com/dtolnay/syn/commit/15b9dbcd67bc56f3da7d33bbede46f7380fc7164"><code>15b9dbc</code></a>
      Update test suite to nightly-2024-01-19</li>
      <li>Additional commits viewable in <a
      href="https://github.com/dtolnay/syn/compare/2.0.48...2.0.49">compare
      view</a></li>
      </ul>
      </details>
      <br />
      
      Updates `serde_yaml` from 0.9.30 to 0.9.31
      <details>
      <summary>Release notes</summary>
      <p><em>Sourced from <a
      href="https://github.com/dtolnay/serde-yaml/releases">serde_yaml's
      releases</a>.</em></p>
      <blockquote>
      <h2>0.9.31</h2>
      <ul>
      <li>Add <code>swap_remove</code> and <code>shift_remove</code> methods
      on Mapping (<a
      href="https://redirect.github.com/dtolnay/serde-yaml/issues/408">#408</a>)</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Commits</summary>
      <ul>
      <li><a
      href="https://github.com/dtolnay/serde-yaml/commit/2a77483b23897115bdd69af32ae34d593268d555"><code>2a77483</code></a>
      Release 0.9.31</li>
      <li><a
      href="https://github.com/dtolnay/serde-yaml/commit/d8d1a839cf42ef4627c66bebd743f5fecd24e3ed"><code>d8d1a83</code></a>
      Merge pull request <a
      href="https://redirect.github.com/dtolnay/serde-yaml/issues/408">#408</a>
      from dtolnay/remove</li>
      <li><a
      href="https://github.com/dtolnay/serde-yaml/commit/f8a99a496836ccfa6c547af9136986d13011be98"><code>f8a99a4</code></a>
      Add swap_remove and shift_remove methods on Mapping</li>
      <li><a
      href="https://github.com/dtolnay/serde-yaml/commit/8b26413e3307e39329dc68a96b065058aec38f9a"><code>8b26413</code></a>
      Work around dead_code warning in tests</li>
      <li>See full diff in <a
      href="https://github.com/dtolnay/serde-yaml/compare/0.9.30...0.9.31">compare
      view</a></li>
      </ul>
      </details>
      <br />
      
      Updates `serde_derive` from 1.0.195 to 1.0.196
      <details>
      <summary>Release notes</summary>
      <p><em>Sourced from <a
      href="https://github.com/serde-rs/serde/releases">serde_derive's
      releases</a>.</em></p>
      <blockquote>
      <h2>v1.0.196</h2>
      <ul>
      <li>Improve formatting of &quot;invalid type&quot; error messages
      involving floats (<a
      href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>)</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Commits</summary>
      <ul>
      <li><a
      href="https://github.com/serde-rs/serde/commit/ede9762a583c3cc3b87c10a53551828fad339525"><code>ede9762</code></a>
      Release 1.0.196</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/d438c2d67bf30e3edab31c2272c4829c12cf4cb5"><code>d438c2d</code></a>
      Merge pull request <a
      href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>
      from dtolnay/decimalpoint</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/bef110b92a171ac568a47339f5bd97938a8c9da2"><code>bef110b</code></a>
      Format Unexpected::Float with decimal point</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/b971ef11d1b53da7673e0c8199e87509c003c1a8"><code>b971ef1</code></a>
      Merge pull request <a
      href="https://redirect.github.com/serde-rs/serde/issues/2681">#2681</a>
      from dtolnay/workspacedeps</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/29d9f693996d199748136d5561a971ed68626724"><code>29d9f69</code></a>
      Fix workspace.dependencies default-features future compat warning</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/aecb4083bde754155752f5d7d442b64eb7dc636f"><code>aecb408</code></a>
      Sort workspace dependencies</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/1c675ab3a38e46df4e62465800970f8b20a2055d"><code>1c675ab</code></a>
      Merge pull request <a
      href="https://redirect.github.com/serde-rs/serde/issues/2678">#2678</a>
      from rodoufu/workspaceDependencies</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/dd619630a337139424725697ccd9a9f7596a2d3a"><code>dd61963</code></a>
      Adding workspace dependencies</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/111803ab0768d010c606f2fc0d0add12750d5eef"><code>111803a</code></a>
      Merge pull request <a
      href="https://redirect.github.com/serde-rs/serde/issues/2673">#2673</a>
      from Sky9x/msrv-badge</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/0024f74f34fbbdc44a7b22457faebe36c5cbe7f8"><code>0024f74</code></a>
      Use shields.io's MSRV badges</li>
      <li>See full diff in <a
      href="https://github.com/serde-rs/serde/compare/v1.0.195...v1.0.196">compare
      view</a></li>
      </ul>
      </details>
      <br />
      
      
      Dependabot will resolve any conflicts with this PR as long as you don't
      alter it yourself. You can also trigger a rebase manually by commenting
      `@dependabot rebase`.
      
      [//]: # (dependabot-automerge-start)
      [//]: # (dependabot-automerge-end)
      
      ---
      
      <details>
      <summary>Dependabot commands and options</summary>
      <br />
      
      You can trigger Dependabot actions by commenting on this PR:
      - `@dependabot rebase` will rebase this PR
      - `@dependabot recreate` will recreate this PR, overwriting any edits
      that have been made to it
      - `@dependabot merge` will merge this PR after your CI passes on it
      - `@dependabot squash and merge` will squash and merge this PR after
      your CI passes on it
      - `@dependabot cancel merge` will cancel a previously requested merge
      and block automerging
      - `@dependabot reopen` will reopen this PR if it is closed
      - `@dependabot close` will close this PR and stop Dependabot recreating
      it. You can achieve the same result by closing it manually
      - `@dependabot show <dependency name> ignore conditions` will show all
      of the ignore conditions of the specified dependency
      - `@dependabot ignore <dependency name> major version` will close this
      group update PR and stop Dependabot creating any more for the specific
      dependency's major version (unless you unignore this specific
      dependency's major version or upgrade to it yourself)
      - `@dependabot ignore <dependency name> minor version` will close this
      group update PR and stop Dependabot creating any more for the specific
      dependency's minor version (unless you unignore this specific
      dependency's minor version or upgrade to it yourself)
      - `@dependabot ignore <dependency name>` will close this group update PR
      and stop Dependabot creating any more for the specific dependency
      (unless you unignore this specific dependency or upgrade to it yourself)
      - `@dependabot unignore <dependency name>` will remove all of the ignore
      conditions of the specified dependency
      - `@dependabot unignore <dependency name> <ignore condition>` will
      remove the ignore condition of the specified dependency and ignore
      conditions
      
      
      </details>
      
      Signed-off-by: default avatardependabot[bot] <[email protected]>
      Co-authored-by: default avatardependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
      4b484e6a
  8. Feb 14, 2024
    • Niklas Adolfsson's avatar
      rpc: bump jsonrpsee v0.22 and fix race in `rpc v2 chain_head` (#3230) · c7c4fe01
      Niklas Adolfsson authored
      Close #2992 
      
      Breaking changes:
      - rpc server grafana metric `substrate_rpc_requests_started` is removed
      (not possible to implement anymore)
      - rpc server grafana metric `substrate_rpc_requests_finished` is removed
      (not possible to implement anymore)
      - rpc server ws ping/pong not ACK:ed within 30 seconds more than three
      times then the connection will be closed
      
      Added
      - rpc server grafana metric `substrate_rpc_sessions_time` is added to
      get the duration for each websocket session
      c7c4fe01
  9. Feb 12, 2024
    • Oliver Tale-Yazdi's avatar
      Lift dependencies to the workspace (Part 1) (#2070) · e80c2473
      Oliver Tale-Yazdi authored
      Changes (partial https://github.com/paritytech/polkadot-sdk/issues/994):
      - Set log to `0.4.20` everywhere
      - Lift `log` to the workspace
      
      Starting with a simpler one after seeing
      https://github.com/paritytech/polkadot-sdk/pull/2065 from @jsdw
      
      .
      This sets the `default-features` to `false` in the root and then
      overwrites that in each create to its original value. This is necessary
      since otherwise the `default` features are additive and its impossible
      to disable them in the crate again once they are enabled in the
      workspace.
      
      I am using a tool to do this, so its mostly a test to see that it works
      as expected.
      
      ---------
      
      Signed-off-by: default avatarOliver Tale-Yazdi <[email protected]>
      e80c2473
  10. Feb 08, 2024
    • Oliver Tale-Yazdi's avatar
      [FRAME] Parameters pallet (#2061) · e53ebd8c
      Oliver Tale-Yazdi authored
      
      
      Closes #169  
      
      Fork of the `orml-parameters-pallet` as introduced by
      https://github.com/open-web3-stack/open-runtime-module-library/pull/927
      (cc @xlc)
      It greatly changes how the macros work, but keeps the pallet the same.
      The downside of my code is now that it does only support constant keys
      in the form of types, not value-bearing keys.
      I think this is an acceptable trade off, give that it can be used by
      *any* pallet without any changes.
      
      The pallet allows to dynamically set parameters that can be used in
      pallet configs while also restricting the updating on a per-key basis.
      The rust-docs contains a complete example.
      
      Changes:
      - Add `parameters-pallet`
      - Use in the kitchensink as demonstration
      - Add experimental attribute to define dynamic params in the runtime.
      - Adding a bunch of traits to `frame_support::traits::dynamic_params`
      that can be re-used by the ORML macros
      
      ## Example
      
      First to define the parameters in the runtime file. The syntax is very
      explicit about the codec index and errors if there is no.
      ```rust
      #[dynamic_params(RuntimeParameters, pallet_parameters::Parameters::<Runtime>))]
      pub mod dynamic_params {
      	use super::*;
      
      	#[dynamic_pallet_params]
      	#[codec(index = 0)]
      	pub mod storage {
      		/// Configures the base deposit of storing some data.
      		#[codec(index = 0)]
      		pub static BaseDeposit: Balance = 1 * DOLLARS;
      
      		/// Configures the per-byte deposit of storing some data.
      		#[codec(index = 1)]
      		pub static ByteDeposit: Balance = 1 * CENTS;
      	}
      
      	#[dynamic_pallet_params]
      	#[codec(index = 1)]
      	pub mod contracts {
      		#[codec(index = 0)]
      		pub static DepositPerItem: Balance = deposit(1, 0);
      
      		#[codec(index = 1)]
      		pub static DepositPerByte: Balance = deposit(0, 1);
      	}
      }
      ```
      
      Then the pallet is configured with the aggregate:  
      ```rust
      impl pallet_parameters::Config for Runtime {
      	type AggregratedKeyValue = RuntimeParameters;
      	type AdminOrigin = EnsureRootWithSuccess<AccountId, ConstBool<true>>;
      	...
      }
      ```
      
      And then the parameters can be used in a pallet config:
      ```rust
      impl pallet_preimage::Config for Runtime {
      	type DepositBase = dynamic_params::storage::DepositBase;
      }
      ```
      
      A custom origin an be defined like this:  
      ```rust
      pub struct DynamicParametersManagerOrigin;
      
      impl EnsureOriginWithArg<RuntimeOrigin, RuntimeParametersKey> for DynamicParametersManagerOrigin {
      	type Success = ();
      
      	fn try_origin(
      		origin: RuntimeOrigin,
      		key: &RuntimeParametersKey,
      	) -> Result<Self::Success, RuntimeOrigin> {
      		match key {
      			RuntimeParametersKey::Storage(_) => {
      				frame_system::ensure_root(origin.clone()).map_err(|_| origin)?;
      				return Ok(())
      			},
      			RuntimeParametersKey::Contract(_) => {
      				frame_system::ensure_root(origin.clone()).map_err(|_| origin)?;
      				return Ok(())
      			},
      		}
      	}
      
      	#[cfg(feature = "runtime-benchmarks")]
      	fn try_successful_origin(_key: &RuntimeParametersKey) -> Result<RuntimeOrigin, ()> {
      		Ok(RuntimeOrigin::Root)
      	}
      }
      ```
      
      ---------
      
      Signed-off-by: default avatarOliver Tale-Yazdi <[email protected]>
      Co-authored-by: default avatarNikhil Gupta <[email protected]>
      Co-authored-by: default avatarKian Paimani <[email protected]>
      Co-authored-by: command-bot <>
      e53ebd8c
    • Oliver Tale-Yazdi's avatar
      `bench pallet`: only require `Hash` instead of `Block` (#3244) · c36c51ca
      Oliver Tale-Yazdi authored
      
      
      Preparation for https://github.com/paritytech/polkadot-sdk/issues/2664
      
      Changes:
      - Only require `Hash` instead of `Block` for the benchmarking
      - Refactor DB types to do the same
      
      ## Integration
      
      This breaking change can easily be integrated into your node via:  
      ```patch
      - cmd.run::<Block, ()>(config)
      + cmd.run::<HashingFor<Block>, ()>(config)
      ```
      
      Status: waiting for CI checks
      
      ---------
      
      Signed-off-by: default avatarOliver Tale-Yazdi <[email protected]>
      Co-authored-by: default avatarBastian Köcher <[email protected]>
      Co-authored-by: default avatarcheme <[email protected]>
      c36c51ca
  11. Feb 06, 2024
    • Oliver Tale-Yazdi's avatar
      Ranked collective `Add`+`Remove` origins (#3212) · c552fb54
      Oliver Tale-Yazdi authored
      
      
      Superseeds https://github.com/paritytech/polkadot-sdk/pull/1245  
      
      This PR is a migration of the
      https://github.com/paritytech/substrate/pull/14577.
      
      The PR added associated types (`AddOrigin` & `RemoveOrigin`) to
      `Config`. It allows you to decouple types and areas of responsibility,
      since at the moment the same types are responsible for adding and
      promoting(removing and demoting). This will improve the flexibility of
      the pallet configuration.
      
      ```
      /// The origin required to add a member.
      type AddOrigin: EnsureOrigin<Self::RuntimeOrigin, Success = ()>;
      
      /// The origin required to remove a member. The success value indicates the
      /// maximum rank *from which* the removal may be.
      type RemoveOrigin: EnsureOrigin<Self::RuntimeOrigin, Success = Rank>;
      ```
      To achieve the backward compatibility, the users of the pallet can use
      the old type via the new morph:
      
      ```
      type AddOrigin = MapSuccess<Self::PromoteOrigin, Ignore>;
      type RemoveOrigin = Self::DemoteOrigin;
      ```
      
      ---------
      
      Signed-off-by: default avatarOliver Tale-Yazdi <[email protected]>
      Co-authored-by: default avatarPraetorP <[email protected]>
      Co-authored-by: default avatarPavel Orlov <[email protected]>
      c552fb54
  12. Jan 31, 2024
    • Oliver Tale-Yazdi's avatar
      [FRAME] Make `core-fellowship` ans `salary` work for swapped members (#3156) · 07e55006
      Oliver Tale-Yazdi authored
      Fixup for https://github.com/paritytech/polkadot-sdk/pull/2587 to make
      the `core-fellowship` crate work with swapped members.
      
      Adds a `MemberSwappedHandler` to the `ranked-collective` pallet that are
      implemented by `core-fellowship+salary`.
      There is are exhaustive tests
      [here](https://github.com/paritytech/polkadot-sdk/blob/72aa7ac1/substrate/frame/core-fellowship/src/tests/integration.rs#L338)
      and
      [here](https://github.com/paritytech/polkadot-sdk/blob/ab3cdb05
      
      /substrate/frame/salary/src/tests/integration.rs#L224)
      to check that adding member `1` is equivalent to adding member `0` and
      then swapping.
      
      ---------
      
      Signed-off-by: default avatarOliver Tale-Yazdi <[email protected]>
      07e55006
    • Branislav Kontur's avatar
      [frame] `#[pallet::composite_enum]` improved variant count handling + removed... · bb8ddc46
      Branislav Kontur authored
      [frame] `#[pallet::composite_enum]` improved variant count handling + removed `pallet_balances`'s `MaxHolds` config (#2657)
      
      I started this investigation/issue based on @liamaharon
      
       question
      [here](https://github.com/paritytech/polkadot-sdk/pull/1801#discussion_r1410452499).
      
      ## Problem
      
      The `pallet_balances` integrity test should correctly detect that the
      runtime has correct distinct `HoldReasons` variant count. I assume the
      same situation exists for RuntimeFreezeReason.
      
      It is not a critical problem, if we set `MaxHolds` with a sufficiently
      large value, everything should be ok. However, in this case, the
      integrity_test check becomes less useful.
      
      **Situation for "any" runtime:**
      - `HoldReason` enums from different pallets:
      ```rust
              /// from pallet_nis
              #[pallet::composite_enum]
      	pub enum HoldReason {
      		NftReceipt,
      	}
      
              /// from pallet_preimage
              #[pallet::composite_enum]
      	pub enum HoldReason {
      		Preimage,
      	}
      
              // from pallet_state-trie-migration
              #[pallet::composite_enum]
      	pub enum HoldReason {
      		SlashForContinueMigrate,
      		SlashForMigrateCustomTop,
      		SlashForMigrateCustomChild,
      	}
      ```
      
      - generated `RuntimeHoldReason` enum looks like:
      ```rust
      pub enum RuntimeHoldReason {
      
          #[codec(index = 32u8)]
          Preimage(pallet_preimage::HoldReason),
      
          #[codec(index = 38u8)]
          Nis(pallet_nis::HoldReason),
      
          #[codec(index = 42u8)]
          StateTrieMigration(pallet_state_trie_migration::HoldReason),
      }
      ```
      
      - composite enum `RuntimeHoldReason` variant count is detected as `3`
      - we set `type MaxHolds = ConstU32<3>`
      - `pallet_balances::integrity_test` is ok with `3`(at least 3)
      
      However, the real problem can occur in a live runtime where some
      functionality might stop working. This is due to a total of 5 distinct
      hold reasons (for pallets with multi-instance support, it is even more),
      and not all of them can be used because of an incorrect `MaxHolds`,
      which is deemed acceptable according to the `integrity_test`:
        ```
        // pseudo-code - if we try to call all of these:
      
      T::Currency::hold(&pallet_nis::HoldReason::NftReceipt.into(),
      &nft_owner, deposit)?;
      T::Currency::hold(&pallet_preimage::HoldReason::Preimage.into(),
      &nft_owner, deposit)?;
      
      T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForContinueMigrate.into(),
      &nft_owner, deposit)?;
      
        // With `type MaxHolds = ConstU32<3>` these two will fail
      
      T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomTop.into(),
      &nft_owner, deposit)?;
      
      T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomChild.into(),
      &nft_owner, deposit)?;
        ```  
      
      
      ## Solutions
      
      A macro `#[pallet::*]` expansion is extended of `VariantCount`
      implementation for the `#[pallet::composite_enum]` enum type. This
      expansion generates the `VariantCount` implementation for pallets'
      `HoldReason`, `FreezeReason`, `LockId`, and `SlashReason`. Enum variants
      must be plain enum values without fields to ensure a deterministic
      count.
      
      The composite runtime enum, `RuntimeHoldReason` and
      `RuntimeFreezeReason`, now sets `VariantCount::VARIANT_COUNT` as the sum
      of pallets' enum `VariantCount::VARIANT_COUNT`:
      ```rust
      #[frame_support::pallet(dev_mode)]
      mod module_single_instance {
      
      	#[pallet::composite_enum]
      	pub enum HoldReason {
      		ModuleSingleInstanceReason1,
      		ModuleSingleInstanceReason2,
      	}
      ...
      }
      
      #[frame_support::pallet(dev_mode)]
      mod module_multi_instance {
      
      	#[pallet::composite_enum]
      	pub enum HoldReason<I: 'static = ()> {
      		ModuleMultiInstanceReason1,
      		ModuleMultiInstanceReason2,
      		ModuleMultiInstanceReason3,
      	}
      ...
      }
      
      
      impl self::sp_api_hidden_includes_construct_runtime::hidden_include::traits::VariantCount
          for RuntimeHoldReason
      {
          const VARIANT_COUNT: u32 = 0
              + module_single_instance::HoldReason::VARIANT_COUNT
              + module_multi_instance::HoldReason::<module_multi_instance::Instance1>::VARIANT_COUNT
              + module_multi_instance::HoldReason::<module_multi_instance::Instance2>::VARIANT_COUNT
              + module_multi_instance::HoldReason::<module_multi_instance::Instance3>::VARIANT_COUNT;
      }
      ```
      
      In addition, `MaxHolds` is removed (as suggested
      [here](https://github.com/paritytech/polkadot-sdk/pull/2657#discussion_r1443324573))
      from `pallet_balances`, and its `Holds` are now bounded to
      `RuntimeHoldReason::VARIANT_COUNT`. Therefore, there is no need to let
      the runtime specify `MaxHolds`.
      
      
      ## For reviewers
      
      Relevant changes can be found here:
      - `substrate/frame/support/procedural/src/lib.rs` 
      -  `substrate/frame/support/procedural/src/pallet/parse/composite.rs`
      -  `substrate/frame/support/procedural/src/pallet/expand/composite.rs`
      -
      `substrate/frame/support/procedural/src/construct_runtime/expand/composite_helper.rs`
      -
      `substrate/frame/support/procedural/src/construct_runtime/expand/hold_reason.rs`
      -
      `substrate/frame/support/procedural/src/construct_runtime/expand/freeze_reason.rs`
      - `substrate/frame/support/src/traits/misc.rs`
      
      And the rest of the files is just about removed `MaxHolds` from
      `pallet_balances`
      
      ## Next steps
      
      Do the same for `MaxFreezes`
      https://github.com/paritytech/polkadot-sdk/issues/2997.
      
      ---------
      
      Co-authored-by: command-bot <>
      Co-authored-by: default avatarBastian Köcher <[email protected]>
      Co-authored-by: default avatarDónal Murray <[email protected]>
      Co-authored-by: default avatargupnik <[email protected]>
      bb8ddc46
  13. Jan 30, 2024
  14. Jan 26, 2024
  15. Jan 24, 2024
    • Branislav Kontur's avatar
      Refactor `pallet-state-trie-migration` to `fungible::*` traits (#1801) · 4374b5d5
      Branislav Kontur authored
      
      
      ## Summary
      
      This PR consolidates `pallet-state-trie-migration` as a part of
      https://github.com/paritytech/polkadot-sdk/issues/226 /
      https://github.com/paritytech/polkadot-sdk/issues/171:
      
      `pallet-state-trie-migration`:
      - [x] replace `Currency` with `fungible` traits
      - [x] run benchmarks
      - [x] refactor to `DefaultConfig`
      
      `pallet_nicks`:
      - [x]  remove
      
      others:
      - [x] remove `as Fn*` or `asFun*` stuff based on discussion
      [here](https://github.com/paritytech/polkadot-sdk/issues/226#issuecomment-1822861445)
      
      ---------
      
      Co-authored-by: default avatarRichard Melkonian <[email protected]>
      Co-authored-by: command-bot <>
      4374b5d5
  16. Jan 23, 2024
    • Niklas Adolfsson's avatar
      rpc: backpressured RPC server (bump jsonrpsee 0.20) (#1313) · e16ef086
      Niklas Adolfsson authored
      This is a rather big change in jsonrpsee, the major things in this bump
      are:
      - Server backpressure (the subscription impls are modified to deal with
      that)
      - Allow custom error types / return types (remove jsonrpsee::core::Error
      and jsonrpee::core::CallError)
      - Bug fixes (graceful shutdown in particular not used by substrate
      anyway)
         - Less dependencies for the clients in particular
         - Return type requires Clone in method call responses
         - Moved to tokio channels
         - Async subscription API (not used in this PR)
      
      Major changes in this PR:
      - The subscriptions are now bounded and if subscription can't keep up
      with the server it is dropped
      - CLI: add parameter to configure the jsonrpc server bounded message
      buffer (default is 64)
      - Add our own subscription helper to deal with the unbounded streams in
      substrate
      
      The most important things in this PR to review is the added helpers
      functions in `substrate/client/rpc/src/utils.rs` and the rest is pretty
      much chore.
      
      Regarding the "bounded buffer limit" it may cause the server to handle
      the JSON-RPC calls
      slower than before.
      
      The message size limit is bounded by "--rpc-response-size" thus "by
      default 10MB * 64 = 640MB"
      but the subscription message size is not covered by this limit and could
      be capped as well.
      
      Hopefully the last release prior to 1.0, sorry in advance for a big PR
      
      Previous attempt: https://github.com/paritytech/substrate/pull/13992
      
      Resolves https://github.com/paritytech/polkadot-sdk/issues/748, resolves
      https://github.com/paritytech/polkadot-sdk/issues/627
      e16ef086
  17. Jan 22, 2024
  18. Jan 18, 2024
    • dependabot[bot]'s avatar
      Bump the known_good_semver group with 1 update (#2953) · 1113fce5
      dependabot[bot] authored
      
      
      Bumps the known_good_semver group with 1 update:
      [clap](https://github.com/clap-rs/clap).
      
      Updates `clap` from 4.4.16 to 4.4.18
      <details>
      <summary>Release notes</summary>
      <p><em>Sourced from <a
      href="https://github.com/clap-rs/clap/releases">clap's
      releases</a>.</em></p>
      <blockquote>
      <h2>v4.4.18</h2>
      <h2>[4.4.18] - 2024-01-16</h2>
      <h3>Fixes</h3>
      <ul>
      <li><em>(error)</em> When lacking <code>usage</code> feature, ensure the
      list of required arguments is unique</li>
      </ul>
      <h2>v4.4.17</h2>
      <h2>[4.4.17] - 2024-01-15</h2>
      <h3>Fixes</h3>
      <ul>
      <li>Fix <code>panic!</code> when mixing
      <code>args_conflicts_with_subcommands</code> with <code>ArgGroup</code>
      (which is implicit with <code>derive</code>) introduced in 4.4.15</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Changelog</summary>
      <p><em>Sourced from <a
      href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
      changelog</a>.</em></p>
      <blockquote>
      <h2>[4.4.18] - 2024-01-16</h2>
      <h3>Fixes</h3>
      <ul>
      <li><em>(error)</em> When lacking <code>usage</code> feature, ensure the
      list of required arguments is unique</li>
      </ul>
      <h2>[4.4.17] - 2024-01-15</h2>
      <h3>Fixes</h3>
      <ul>
      <li>Fix <code>panic!</code> when mixing
      <code>args_conflicts_with_subcommands</code> with <code>ArgGroup</code>
      (which is implicit with <code>derive</code>) introduced in 4.4.15</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Commits</summary>
      <ul>
      <li><a
      href="https://github.com/clap-rs/clap/commit/0134f45ff0e2e2be8c451565e4fbf5d3cb7b7cfd"><code>0134f45</code></a>
      chore: Release</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/995ee032779d802606e599caf4f498ea51e92e82"><code>995ee03</code></a>
      docs: Update changelog</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/2f1890907ed4e78674feeb96df34cfb813b84686"><code>2f18909</code></a>
      Merge pull request <a
      href="https://redirect.github.com/clap-rs/clap/issues/5314">#5314</a>
      from epage/required</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/0a635b9a20077e2f932a9baee527052d8ed45d9e"><code>0a635b9</code></a>
      fix(parser): Don't duplicate requireds when usage disabled</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/e648e086f3934afb40b121b5999b9e23657ddc28"><code>e648e08</code></a>
      Merge pull request <a
      href="https://redirect.github.com/clap-rs/clap/issues/5311">#5311</a>
      from sourcefrog/doc-exitcode</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/8c83971b8c356b8c9abfbbb2320cb946a2ee8139"><code>8c83971</code></a>
      docs: Link to exit code info</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/b250c0b5f5920b59e551bf0ec90e17c6103ae4a2"><code>b250c0b</code></a>
      Merge pull request <a
      href="https://redirect.github.com/clap-rs/clap/issues/5310">#5310</a>
      from epage/pty</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/c742b8eb0ca648b645b616e064e00408944f390e"><code>c742b8e</code></a>
      chore(complete): Update completest-pty</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/f524d84c1d3eca1c980c5150c750d9e00cbbdb0c"><code>f524d84</code></a>
      chore: Release</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/944fb81cf593af1cd3a58dd959c934f0ff483182"><code>944fb81</code></a>
      docs: Update changelog</li>
      <li>Additional commits viewable in <a
      href="https://github.com/clap-rs/clap/compare/v4.4.16...v4.4.18">compare
      view</a></li>
      </ul>
      </details>
      <br />
      
      
      [![Dependabot compatibility
      score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=clap&package-manager=cargo&previous-version=4.4.16&new-version=4.4.18)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
      
      Dependabot will resolve any conflicts with this PR as long as you don't
      alter it yourself. You can also trigger a rebase manually by commenting
      `@dependabot rebase`.
      
      [//]: # (dependabot-automerge-start)
      [//]: # (dependabot-automerge-end)
      
      ---
      
      <details>
      <summary>Dependabot commands and options</summary>
      <br />
      
      You can trigger Dependabot actions by commenting on this PR:
      - `@dependabot rebase` will rebase this PR
      - `@dependabot recreate` will recreate this PR, overwriting any edits
      that have been made to it
      - `@dependabot merge` will merge this PR after your CI passes on it
      - `@dependabot squash and merge` will squash and merge this PR after
      your CI passes on it
      - `@dependabot cancel merge` will cancel a previously requested merge
      and block automerging
      - `@dependabot reopen` will reopen this PR if it is closed
      - `@dependabot close` will close this PR and stop Dependabot recreating
      it. You can achieve the same result by closing it manually
      - `@dependabot show <dependency name> ignore conditions` will show all
      of the ignore conditions of the specified dependency
      - `@dependabot ignore <dependency name> major version` will close this
      group update PR and stop Dependabot creating any more for the specific
      dependency's major version (unless you unignore this specific
      dependency's major version or upgrade to it yourself)
      - `@dependabot ignore <dependency name> minor version` will close this
      group update PR and stop Dependabot creating any more for the specific
      dependency's minor version (unless you unignore this specific
      dependency's minor version or upgrade to it yourself)
      - `@dependabot ignore <dependency name>` will close this group update PR
      and stop Dependabot creating any more for the specific dependency
      (unless you unignore this specific dependency or upgrade to it yourself)
      - `@dependabot unignore <dependency name>` will remove all of the ignore
      conditions of the specified dependency
      - `@dependabot unignore <dependency name> <ignore condition>` will
      remove the ignore condition of the specified dependency and ignore
      conditions
      
      
      </details>
      
      Signed-off-by: default avatardependabot[bot] <[email protected]>
      Co-authored-by: default avatardependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
      Co-authored-by: default avatarBastian Köcher <[email protected]>
      Co-authored-by: default avatarDónal Murray <[email protected]>
      1113fce5
  19. Jan 15, 2024
    • dependabot[bot]'s avatar
      Bump the known_good_semver group with 1 update (#2926) · ac303406
      dependabot[bot] authored
      
      
      Bumps the known_good_semver group with 1 update:
      [clap](https://github.com/clap-rs/clap).
      
      Updates `clap` from 4.4.14 to 4.4.16
      <details>
      <summary>Release notes</summary>
      <p><em>Sourced from <a
      href="https://github.com/clap-rs/clap/releases">clap's
      releases</a>.</em></p>
      <blockquote>
      <h2>v4.4.16</h2>
      <h2>[4.4.16] - 2024-01-12</h2>
      <h3>Fixes</h3>
      <ul>
      <li>Ensure invalid escape sequences in user-defined strings are
      correctly stripped when terminal doesn't support color</li>
      </ul>
      <h2>v4.4.15</h2>
      <h2>[4.4.15] - 2024-01-11</h2>
      <h3>Fixes</h3>
      <ul>
      <li>Improve error for <code>args_conflicts_with_subcommands</code></li>
      <li>Ensure we error for <code>args_conflicts_with_subcommands</code>
      when using subcommand short and long flags</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Changelog</summary>
      <p><em>Sourced from <a
      href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
      changelog</a>.</em></p>
      <blockquote>
      <h2>[4.4.16] - 2024-01-12</h2>
      <h3>Fixes</h3>
      <ul>
      <li>Ensure invalid escape sequences in user-defined strings are
      correctly stripped when terminal doesn't support color</li>
      </ul>
      <h2>[4.4.15] - 2024-01-11</h2>
      <h3>Fixes</h3>
      <ul>
      <li>Improve error for <code>args_conflicts_with_subcommands</code></li>
      <li>Ensure we error for <code>args_conflicts_with_subcommands</code>
      when using subcommand short and long flags</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Commits</summary>
      <ul>
      <li><a
      href="https://github.com/clap-rs/clap/commit/cbc9c9dd44fc4be25c196213d508b9d2a9c282f3"><code>cbc9c9d</code></a>
      chore: Release</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/4718b89486c7c4236a18411b8449afc2d93f8e3d"><code>4718b89</code></a>
      docs: Update changelog</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/38f805cea0cf50a0f26ed01e4fdf550ca8a555fa"><code>38f805c</code></a>
      Merge pull request <a
      href="https://redirect.github.com/clap-rs/clap/issues/5299">#5299</a>
      from epage/ansi</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/2a3356a53543531726e851e97639810f3828a89b"><code>2a3356a</code></a>
      fix: Update anstream</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/12b5c39d467ea147c21f5eb3063fc0bc2538e9b7"><code>12b5c39</code></a>
      chore: Release</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/1c5b63390babdb4f3a8994436da4e7f9239b7d43"><code>1c5b633</code></a>
      docs: Update changelog</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/a5d46410e072b9821f76b21839849c4434a2f8da"><code>a5d4641</code></a>
      Merge pull request <a
      href="https://redirect.github.com/clap-rs/clap/issues/5298">#5298</a>
      from epage/conflict</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/f529ec398c4262296d5e6eb063b1b52d875d7f03"><code>f529ec3</code></a>
      fix(parser): Ensure subcommand flags can conflict</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/a7e04a53e4a9e310663a0cdb5bfb0753d84b82bd"><code>a7e04a5</code></a>
      fix(parser): Improve subcommand conflict error</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/ea00ef3051fd5a993b766062a4e9defc777bf233"><code>ea00ef3</code></a>
      refactor(error): Allow more conflict sources</li>
      <li>Additional commits viewable in <a
      href="https://github.com/clap-rs/clap/compare/v4.4.14...v4.4.16">compare
      view</a></li>
      </ul>
      </details>
      <br />
      
      
      [![Dependabot compatibility
      score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=clap&package-manager=cargo&previous-version=4.4.14&new-version=4.4.16)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
      
      Dependabot will resolve any conflicts with this PR as long as you don't
      alter it yourself. You can also trigger a rebase manually by commenting
      `@dependabot rebase`.
      
      [//]: # (dependabot-automerge-start)
      [//]: # (dependabot-automerge-end)
      
      ---
      
      <details>
      <summary>Dependabot commands and options</summary>
      <br />
      
      You can trigger Dependabot actions by commenting on this PR:
      - `@dependabot rebase` will rebase this PR
      - `@dependabot recreate` will recreate this PR, overwriting any edits
      that have been made to it
      - `@dependabot merge` will merge this PR after your CI passes on it
      - `@dependabot squash and merge` will squash and merge this PR after
      your CI passes on it
      - `@dependabot cancel merge` will cancel a previously requested merge
      and block automerging
      - `@dependabot reopen` will reopen this PR if it is closed
      - `@dependabot close` will close this PR and stop Dependabot recreating
      it. You can achieve the same result by closing it manually
      - `@dependabot show <dependency name> ignore conditions` will show all
      of the ignore conditions of the specified dependency
      - `@dependabot ignore <dependency name> major version` will close this
      group update PR and stop Dependabot creating any more for the specific
      dependency's major version (unless you unignore this specific
      dependency's major version or upgrade to it yourself)
      - `@dependabot ignore <dependency name> minor version` will close this
      group update PR and stop Dependabot creating any more for the specific
      dependency's minor version (unless you unignore this specific
      dependency's minor version or upgrade to it yourself)
      - `@dependabot ignore <dependency name>` will close this group update PR
      and stop Dependabot creating any more for the specific dependency
      (unless you unignore this specific dependency or upgrade to it yourself)
      - `@dependabot unignore <dependency name>` will remove all of the ignore
      conditions of the specified dependency
      - `@dependabot unignore <dependency name> <ignore condition>` will
      remove the ignore condition of the specified dependency and ignore
      conditions
      
      
      </details>
      
      Signed-off-by: default avatardependabot[bot] <[email protected]>
      Co-authored-by: default avatardependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
      ac303406
  20. Jan 12, 2024
    • Dmitry Markin's avatar
      Extract warp sync strategy from `ChainSync` (#2467) · 5208bed7
      Dmitry Markin authored
      
      
      Extract `WarpSync` (and `StateSync` as part of warp sync) from
      `ChainSync` as independent syncing strategy called by `SyncingEngine`.
      Introduce `SyncingStrategy` enum as a proxy between `SyncingEngine` and
      specific syncing strategies.
      
      ## Limitations
      Gap sync is kept in `ChainSync` for now because it shares the same set
      of peers as block syncing implementation in `ChainSync`. Extraction of a
      common context responsible for peer management in syncing strategies
      able to run in parallel is planned for a follow-up PR.
      
      ## Further improvements
      A possibility of conversion of `SyncingStartegy` into a trait should be
      evaluated. The main stopper for this is that different strategies need
      to communicate different actions to `SyncingEngine` and respond to
      different events / provide different APIs (e.g., requesting
      justifications is only possible via `ChainSync` and not through
      `WarpSync`; `SendWarpProofRequest` action is only relevant to
      `WarpSync`, etc.)
      
      ---------
      
      Co-authored-by: default avatarAaro Altonen <[email protected]>
      5208bed7
    • Serban Iorga's avatar
      Kitchensink: Fix pallet_mmr config (#2919) · 868788a5
      Serban Iorga authored
      Related to https://github.com/paritytech/polkadot-sdk/issues/2787
      
      Fixes `pallet_mmr::Config` for the kitchensink runtime
      868788a5
  21. Jan 11, 2024
    • Sebastian Kunert's avatar
      Cumulus test service cleanup (#2887) · c93f5aba
      Sebastian Kunert authored
      closes #2567 
      
      Followup for https://github.com/paritytech/polkadot-sdk/pull/2331
      
      This PR contains multiple internal cleanups:
      
      1. This gets rid of the functionality in `generate_genesis_block` which
      was only used in one benchmark
      2. Fixed `transaction_pool` and `transaction_throughput` benchmarks
      failing since they require a tokio runtime now.
      3. Removed `parachain_id` CLI option from the test parachain
      4. Removed `expect` call from `RuntimeResolver`
      c93f5aba
  22. Jan 10, 2024
    • Nazar Mokrynskyi's avatar
      Improve storage monitor API (#2899) · af2e30e3
      Nazar Mokrynskyi authored
      This removes the need to unnecessarily provide a very specific data
      structure `DatabaseSource` and removes huge `sc-client-db` dependency
      from storage monitor. It is now possible to use storage monitor with any
      path.
      
      P.S. I still strongly dislike that it pulls `clap` dependency for such a
      small feature, but many other crates do as well, so nothing special
      here.
      af2e30e3
    • joe petrowski's avatar
      Unique Usernames in Identity Pallet (#2651) · d1f678c0
      joe petrowski authored
      
      
      This PR allows _username authorities_ to issue unique usernames that
      correspond with an account. It also provides two-way lookup, that is
      from `AccountId` to a single, "primary" `Username` (alongside
      `Registration`) and multiple unique `Username`s to an `AccountId`.
      
      Key features:
      
      - Username Authorities added (and removed) via privileged origin.
      - Authorities have a `suffix` and an `allocation`. They can grant up to
      `allocation` usernames. Their `suffix` will be appended to the usernames
      that they issue. A suffix may be up to 7 characters long.
      - Users can ask an authority to grant them a username. This will take
      the form `myusername.suffix`. The entire name (including suffix) must be
      less than or equal to 32 alphanumeric characters.
      - Users can approve a username for themselves in one of two ways (that
      is, authorities cannot grant them arbitrarily):
      - Pre-sign the entire username (including suffix) with a secret key that
      corresponds to their `AccountId` (for keyed accounts, obviously); or
      - Accept the username after it has been granted by an authority (it will
      be queued until accepted) (for non-keyed accounts like pure proxies or
      multisigs).
      - The system does not require any funds or deposits. Users without an
      identity will be given a default one (presumably all fields set to
      `None`). If they update this info, they will need to place the normal
      storage deposit.
      - If a user does not have any username, their first one will be set as
      `Primary`, and their `AccountId` will map to that one. If they get
      subsequent usernames, they can choose which one to be their primary via
      `set_primary_username`.
      - There are some state cleanup functions to remove expired usernames
      that have not been accepted and dangling usernames whose owners have
      called `clear_identity`.
      
      TODO:
      
      - [x] Add migration to runtimes
      - [x] Probably do off-chain migration into People Chain genesis
      - [x] Address a few TODO questions in code (please review)
      
      ---------
      
      Co-authored-by: default avatarLiam Aharon <[email protected]>
      Co-authored-by: default avatarGonçalo Pestana <[email protected]>
      Co-authored-by: default avatarOliver Tale-Yazdi <[email protected]>
      Co-authored-by: default avatarDónal Murray <[email protected]>
      d1f678c0
  23. Jan 09, 2024
    • dependabot[bot]'s avatar
      Bump the known_good_semver group with 1 update (#2881) · 14f49002
      dependabot[bot] authored
      
      
      Bumps the known_good_semver group with 1 update:
      [clap](https://github.com/clap-rs/clap).
      
      Updates `clap` from 4.4.13 to 4.4.14
      <details>
      <summary>Release notes</summary>
      <p><em>Sourced from <a
      href="https://github.com/clap-rs/clap/releases">clap's
      releases</a>.</em></p>
      <blockquote>
      <h2>v4.4.14</h2>
      <h2>[4.4.14] - 2024-01-08</h2>
      <h3>Documentation</h3>
      <ul>
      <li>Fix <code>find</code> cookbook entry to allow repeats of
      flags/options</li>
      </ul>
      <h3>Features</h3>
      <ul>
      <li>Allow <code>num_args(0)</code> on options which allows making them
      emulate being a flag for position-tracking flags</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Changelog</summary>
      <p><em>Sourced from <a
      href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
      changelog</a>.</em></p>
      <blockquote>
      <h2>[4.4.14] - 2024-01-08</h2>
      <h3>Documentation</h3>
      <ul>
      <li>Fix <code>find</code> cookbook entry to allow repeats of
      flags/options</li>
      </ul>
      <h3>Features</h3>
      <ul>
      <li>Allow <code>num_args(0)</code> on options which allows making them
      emulate being a flag for position-tracking flags</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Commits</summary>
      <ul>
      <li><a
      href="https://github.com/clap-rs/clap/commit/514f28bc92ed683d53292cbe9457db3ec5df7b6f"><code>514f28b</code></a>
      chore: Release</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/1440456d3ddaa6d9624297d83de9bb9abe82f10b"><code>1440456</code></a>
      docs: Update changelog</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/d6479ff7ddbcf524146428c92be23273b4f8bac5"><code>d6479ff</code></a>
      Merge pull request <a
      href="https://redirect.github.com/clap-rs/clap/issues/5290">#5290</a>
      from epage/or</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/02f82146ad746ce9d1874e38ec7033150bb12622"><code>02f8214</code></a>
      docs(cookbook): Clarify intent of fake flags</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/c603f34574832b8894b44e0f67fd19dc7869e808"><code>c603f34</code></a>
      Merge pull request <a
      href="https://redirect.github.com/clap-rs/clap/issues/5275">#5275</a>
      from epage/ci</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/641b42b2e82086775619bd15854ddb5b80311b49"><code>641b42b</code></a>
      chore(ci): Speed up critical path of CI</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/3eaf1af052bd5255cc2440dc1cc8f80831a3428b"><code>3eaf1af</code></a>
      fix(help): Correctly show help for fake flags</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/d63106b9f698df0d2241662ab1459c823890dec4"><code>d63106b</code></a>
      docs(cookbook): Allow repeated operators</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/148e102ac37bd0e5ca99cfe9c5d57ffc6243cf66"><code>148e102</code></a>
      fix(builder): Allow custom flag definitions</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/d53d881e339fec64e48990170b542fae4140eaaa"><code>d53d881</code></a>
      docs(cookbook): Demonstrate bad 'find' behavior</li>
      <li>See full diff in <a
      href="https://github.com/clap-rs/clap/compare/v4.4.13...v4.4.14">compare
      view</a></li>
      </ul>
      </details>
      <br />
      
      
      [![Dependabot compatibility
      score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=clap&package-manager=cargo&previous-version=4.4.13&new-version=4.4.14)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
      
      Dependabot will resolve any conflicts with this PR as long as you don't
      alter it yourself. You can also trigger a rebase manually by commenting
      `@dependabot rebase`.
      
      [//]: # (dependabot-automerge-start)
      [//]: # (dependabot-automerge-end)
      
      ---
      
      <details>
      <summary>Dependabot commands and options</summary>
      <br />
      
      You can trigger Dependabot actions by commenting on this PR:
      - `@dependabot rebase` will rebase this PR
      - `@dependabot recreate` will recreate this PR, overwriting any edits
      that have been made to it
      - `@dependabot merge` will merge this PR after your CI passes on it
      - `@dependabot squash and merge` will squash and merge this PR after
      your CI passes on it
      - `@dependabot cancel merge` will cancel a previously requested merge
      and block automerging
      - `@dependabot reopen` will reopen this PR if it is closed
      - `@dependabot close` will close this PR and stop Dependabot recreating
      it. You can achieve the same result by closing it manually
      - `@dependabot show <dependency name> ignore conditions` will show all
      of the ignore conditions of the specified dependency
      - `@dependabot ignore <dependency name> major version` will close this
      group update PR and stop Dependabot creating any more for the specific
      dependency's major version (unless you unignore this specific
      dependency's major version or upgrade to it yourself)
      - `@dependabot ignore <dependency name> minor version` will close this
      group update PR and stop Dependabot creating any more for the specific
      dependency's minor version (unless you unignore this specific
      dependency's minor version or upgrade to it yourself)
      - `@dependabot ignore <dependency name>` will close this group update PR
      and stop Dependabot creating any more for the specific dependency
      (unless you unignore this specific dependency or upgrade to it yourself)
      - `@dependabot unignore <dependency name>` will remove all of the ignore
      conditions of the specified dependency
      - `@dependabot unignore <dependency name> <ignore condition>` will
      remove the ignore condition of the specified dependency and ignore
      conditions
      
      
      </details>
      
      Signed-off-by: default avatardependabot[bot] <[email protected]>
      Co-authored-by: default avatardependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
      14f49002
  24. Jan 07, 2024
    • dependabot[bot]'s avatar
      Bump the known_good_semver group with 4 updates (#2865) · 204fe7ff
      dependabot[bot] authored
      
      
      Bumps the known_good_semver group with 4 updates:
      [serde](https://github.com/serde-rs/serde),
      [serde_json](https://github.com/serde-rs/json),
      [clap](https://github.com/clap-rs/clap) and
      [syn](https://github.com/dtolnay/syn).
      
      Updates `serde` from 1.0.194 to 1.0.195
      <details>
      <summary>Release notes</summary>
      <p><em>Sourced from <a
      href="https://github.com/serde-rs/serde/releases">serde's
      releases</a>.</em></p>
      <blockquote>
      <h2>v1.0.195</h2>
      <ul>
      <li>Prevent remote definitions of tuple struct or tuple variant from
      triggering dead_code warning (<a
      href="https://redirect.github.com/serde-rs/serde/issues/2671">#2671</a>)</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Commits</summary>
      <ul>
      <li><a
      href="https://github.com/serde-rs/serde/commit/03eec42c3313b36da416be1486e9ecac345784d5"><code>03eec42</code></a>
      Release 1.0.195</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/196f311ae2fd8ad94fe38a57830419859a4d3dbb"><code>196f311</code></a>
      Merge pull request <a
      href="https://redirect.github.com/serde-rs/serde/issues/2671">#2671</a>
      from dtolnay/deadremote</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/38d9e0b2091e9b6150486c2c37367819b86bcc39"><code>38d9e0b</code></a>
      Revert &quot;Add FIXME to fix dead_code warning when using
      serde(remote)&quot;</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/6502b3131697eff6420786ad71f87f29cfff3a13"><code>6502b31</code></a>
      Fix new dead_code warning in tuple struct and tuple variant remote
      defs</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/6f1a8c3115c8d2502178c25d610fbaee2e82c46b"><code>6f1a8c3</code></a>
      Add FIXME to fix dead_code warning when using serde(remote)</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/d883c94cc9fe72d0512dc7f4def7191a401595c9"><code>d883c94</code></a>
      Work around dead_code warning in tests</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/961fa59a7469c5b5e323b9723323df412048d60d"><code>961fa59</code></a>
      Merge pull request <a
      href="https://redirect.github.com/serde-rs/serde/issues/2670">#2670</a>
      from serde-rs/exhaustive</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/8bc71def551df190e6817d3311e5c76f751f53e6"><code>8bc71de</code></a>
      Fill in omitted patterns for GenericArguments match</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/7c65a9dc0eab2d4d829b258a7b3549351bbe8dcd"><code>7c65a9d</code></a>
      Pick up changes to non_exhaustive_omitted_patterns lint</li>
      <li>See full diff in <a
      href="https://github.com/serde-rs/serde/compare/v1.0.194...v1.0.195">compare
      view</a></li>
      </ul>
      </details>
      <br />
      
      Updates `serde_json` from 1.0.110 to 1.0.111
      <details>
      <summary>Release notes</summary>
      <p><em>Sourced from <a
      href="https://github.com/serde-rs/json/releases">serde_json's
      releases</a>.</em></p>
      <blockquote>
      <h2>v1.0.111</h2>
      <ul>
      <li>Improve floating point parsing performance on loongarch64 (<a
      href="https://redirect.github.com/serde-rs/json/issues/1100">#1100</a>,
      thanks <a
      href="https://github.com/heiher"><code>@​heiher</code></a>)</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Commits</summary>
      <ul>
      <li><a
      href="https://github.com/serde-rs/json/commit/0131ac68212e8094bd14ee618587d731b4f9a68b"><code>0131ac6</code></a>
      Release 1.0.111</li>
      <li><a
      href="https://github.com/serde-rs/json/commit/96ecfadd3f7dd6366a2d07a098e228d15df93cb4"><code>96ecfad</code></a>
      Merge pull request <a
      href="https://redirect.github.com/serde-rs/json/issues/1100">#1100</a>
      from heiher/limb-64-la64</li>
      <li><a
      href="https://github.com/serde-rs/json/commit/c80dbaf8ff5902ca670e0a48bbe495065b9314f5"><code>c80dbaf</code></a>
      Set limb width to 64 for loongarch64</li>
      <li>See full diff in <a
      href="https://github.com/serde-rs/json/compare/v1.0.110...v1.0.111">compare
      view</a></li>
      </ul>
      </details>
      <br />
      
      Updates `clap` from 4.4.12 to 4.4.13
      <details>
      <summary>Release notes</summary>
      <p><em>Sourced from <a
      href="https://github.com/clap-rs/clap/releases">clap's
      releases</a>.</em></p>
      <blockquote>
      <h2>v4.4.13</h2>
      <h2>[4.4.13] - 2024-01-04</h2>
      <h3>Documentation</h3>
      <ul>
      <li>Fix link to structopt migration guide</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Changelog</summary>
      <p><em>Sourced from <a
      href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
      changelog</a>.</em></p>
      <blockquote>
      <h2>[4.4.13] - 2024-01-04</h2>
      <h3>Documentation</h3>
      <ul>
      <li>Fix link to structopt migration guide</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Commits</summary>
      <ul>
      <li><a
      href="https://github.com/clap-rs/clap/commit/2ab48b295c2463ce8c141a9868095b811ccf3b99"><code>2ab48b2</code></a>
      chore: Release</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/7a06a8cd619db704c6d826bf752eae3b86ce23a8"><code>7a06a8c</code></a>
      docs: Update changelog</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/cca190efedf40f48147a3a4a777a9cc17728abdf"><code>cca190e</code></a>
      docs: Correct link to StructOpt migration guide</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/5c31f453c1a9f46109db8e0a47ed212748c0556c"><code>5c31f45</code></a>
      Merge pull request <a
      href="https://redirect.github.com/clap-rs/clap/issues/5281">#5281</a>
      from Manishearth/safety-docs</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/ddae7e6f411c4c87294212152b8d9beea16637e7"><code>ddae7e6</code></a>
      Correct safety docs</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/48d28aa689bfd0fb44ec025244b30ba261e2515a"><code>48d28aa</code></a>
      chore: Release</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/748ce18cc2ccc3f7c07fa8b7c5b6f90ed9242b72"><code>748ce18</code></a>
      docs: Update changelog</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/adbe6ec4cb6a617070c41927a389d0bea7b30936"><code>adbe6ec</code></a>
      Merge pull request <a
      href="https://redirect.github.com/clap-rs/clap/issues/5278">#5278</a>
      from henry-hsieh/fix-nosort</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/2b48858ba84c62e9af97bee4734d70530254cd8a"><code>2b48858</code></a>
      fix: Skip nosort option below bash 4.4</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/777b744102cde324dc75534ef043efc15a9f40be"><code>777b744</code></a>
      Merge pull request <a
      href="https://redirect.github.com/clap-rs/clap/issues/5277">#5277</a>
      from clap-rs/renovate/actions-setup-python-5.x</li>
      <li>Additional commits viewable in <a
      href="https://github.com/clap-rs/clap/compare/v4.4.12...v4.4.13">compare
      view</a></li>
      </ul>
      </details>
      <br />
      
      Updates `syn` from 2.0.47 to 2.0.48
      <details>
      <summary>Release notes</summary>
      <p><em>Sourced from <a
      href="https://github.com/dtolnay/syn/releases">syn's
      releases</a>.</em></p>
      <blockquote>
      <h2>2.0.48</h2>
      <ul>
      <li>Improve error message on unexpected token after <code>else</code>
      (<a
      href="https://redirect.github.com/dtolnay/syn/issues/1578">#1578</a>)</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Commits</summary>
      <ul>
      <li><a
      href="https://github.com/dtolnay/syn/commit/5e16fc24e68b16a381cb7ef22455dba9db143083"><code>5e16fc2</code></a>
      Release 2.0.48</li>
      <li><a
      href="https://github.com/dtolnay/syn/commit/dc40084b15ab4a443179fc39cbadac6452408838"><code>dc40084</code></a>
      Merge pull request <a
      href="https://redirect.github.com/dtolnay/syn/issues/1578">#1578</a>
      from dtolnay/elseblock</li>
      <li><a
      href="https://github.com/dtolnay/syn/commit/82fcefce69d36e78301936c5af91f005d6a24357"><code>82fcefc</code></a>
      Fix error message on unexpected token after 'else'</li>
      <li><a
      href="https://github.com/dtolnay/syn/commit/e8a5c68ad45194e575a923f6b1e08f1817196331"><code>e8a5c68</code></a>
      Merge pull request <a
      href="https://redirect.github.com/dtolnay/syn/issues/1576">#1576</a>
      from dtolnay/exhaustive</li>
      <li><a
      href="https://github.com/dtolnay/syn/commit/97b1df6d935cb4801f4090782304577c8574d024"><code>97b1df6</code></a>
      Pick up changes to non_exhaustive_omitted_patterns lint</li>
      <li>See full diff in <a
      href="https://github.com/dtolnay/syn/compare/2.0.47...2.0.48">compare
      view</a></li>
      </ul>
      </details>
      <br />
      
      
      Dependabot will resolve any conflicts with this PR as long as you don't
      alter it yourself. You can also trigger a rebase manually by commenting
      `@dependabot rebase`.
      
      [//]: # (dependabot-automerge-start)
      [//]: # (dependabot-automerge-end)
      
      ---
      
      <details>
      <summary>Dependabot commands and options</summary>
      <br />
      
      You can trigger Dependabot actions by commenting on this PR:
      - `@dependabot rebase` will rebase this PR
      - `@dependabot recreate` will recreate this PR, overwriting any edits
      that have been made to it
      - `@dependabot merge` will merge this PR after your CI passes on it
      - `@dependabot squash and merge` will squash and merge this PR after
      your CI passes on it
      - `@dependabot cancel merge` will cancel a previously requested merge
      and block automerging
      - `@dependabot reopen` will reopen this PR if it is closed
      - `@dependabot close` will close this PR and stop Dependabot recreating
      it. You can achieve the same result by closing it manually
      - `@dependabot show <dependency name> ignore conditions` will show all
      of the ignore conditions of the specified dependency
      - `@dependabot ignore <dependency name> major version` will close this
      group update PR and stop Dependabot creating any more for the specific
      dependency's major version (unless you unignore this specific
      dependency's major version or upgrade to it yourself)
      - `@dependabot ignore <dependency name> minor version` will close this
      group update PR and stop Dependabot creating any more for the specific
      dependency's minor version (unless you unignore this specific
      dependency's minor version or upgrade to it yourself)
      - `@dependabot ignore <dependency name>` will close this group update PR
      and stop Dependabot creating any more for the specific dependency
      (unless you unignore this specific dependency or upgrade to it yourself)
      - `@dependabot unignore <dependency name>` will remove all of the ignore
      conditions of the specified dependency
      - `@dependabot unignore <dependency name> <ignore condition>` will
      remove the ignore condition of the specified dependency and ignore
      conditions
      
      
      </details>
      
      Signed-off-by: default avatardependabot[bot] <[email protected]>
      Co-authored-by: default avatardependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
      204fe7ff
  25. Jan 06, 2024
    • Serban Iorga's avatar
      Kitchensink chain: Add BEEFY support (#2856) · 2e4b8996
      Serban Iorga authored
      Related to https://github.com/paritytech/polkadot-sdk/issues/2787
      
      Adding BEEFY support to the kitchensink chain in order to be able to
      extend the current warp sync zombienet tests with BEEFY enabled
      2e4b8996
  26. Jan 04, 2024
    • dependabot[bot]'s avatar
      Bump the known_good_semver group with 4 updates (#2845) · 88e7b49c
      dependabot[bot] authored
      
      
      Bumps the known_good_semver group with 4 updates:
      [serde](https://github.com/serde-rs/serde),
      [serde_json](https://github.com/serde-rs/json),
      [clap](https://github.com/clap-rs/clap) and
      [serde_yaml](https://github.com/dtolnay/serde-yaml).
      
      Updates `serde` from 1.0.193 to 1.0.194
      <details>
      <summary>Release notes</summary>
      <p><em>Sourced from <a
      href="https://github.com/serde-rs/serde/releases">serde's
      releases</a>.</em></p>
      <blockquote>
      <h2>v1.0.194</h2>
      <ul>
      <li>Update proc-macro2 to fix caching issue when using a rustc-wrapper
      such as sccache</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Commits</summary>
      <ul>
      <li><a
      href="https://github.com/serde-rs/serde/commit/d2d977a6c6dcff237ae956336d18b0c900c61aad"><code>d2d977a</code></a>
      Release 1.0.194</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/a9a6ee9d7f2e3a3306ad7c7a8f21dcf369c6acb7"><code>a9a6ee9</code></a>
      Pull in proc-macro2 sccache fix</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/28c5d215c11b66368b725f04cb92e49e4350bcdc"><code>28c5d21</code></a>
      Merge pull request <a
      href="https://redirect.github.com/serde-rs/serde/issues/2669">#2669</a>
      from dtolnay/optionifletelse</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/3d6a789562579fb7ea783e0d7f35530914d8baca"><code>3d6a789</code></a>
      Remove option_if_let_else clippy suppression</li>
      <li><a
      href="https://github.com/serde-rs/serde/commit/a0e68698e33fa928f1d9f208d68b17df9f8bb568"><code>a0e6869</code></a>
      Work around doc_link_with_quotes pedantic clippy lint</li>
      <li>See full diff in <a
      href="https://github.com/serde-rs/serde/compare/v1.0.193...v1.0.194">compare
      view</a></li>
      </ul>
      </details>
      <br />
      
      Updates `serde_json` from 1.0.108 to 1.0.110
      <details>
      <summary>Release notes</summary>
      <p><em>Sourced from <a
      href="https://github.com/serde-rs/json/releases">serde_json's
      releases</a>.</em></p>
      <blockquote>
      <h2>v1.0.109</h2>
      <ul>
      <li>Documentation improvements</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Commits</summary>
      <ul>
      <li><a
      href="https://github.com/serde-rs/json/commit/df5cf215b70fb6341b255e7c0a210c06f64c0669"><code>df5cf21</code></a>
      Release 1.0.110</li>
      <li><a
      href="https://github.com/serde-rs/json/commit/c35856a93c37b48b3d6efc4fec8e05554dd3f9d5"><code>c35856a</code></a>
      Pull in proc-macro2 sccache fix</li>
      <li><a
      href="https://github.com/serde-rs/json/commit/f88bf1fccb05aa4de129675de44eb6aaf3fec0a0"><code>f88bf1f</code></a>
      Release 1.0.109</li>
      <li><a
      href="https://github.com/serde-rs/json/commit/bb62c73ecef901e689b0a7a67ed613a32975520c"><code>bb62c73</code></a>
      Merge pull request <a
      href="https://redirect.github.com/serde-rs/json/issues/1097">#1097</a>
      from serde-rs/doccfg</li>
      <li><a
      href="https://github.com/serde-rs/json/commit/df36d109fd9f9cdd22a874c0177cafec12237f95"><code>df36d10</code></a>
      Restore doc cfg on re-exports</li>
      <li><a
      href="https://github.com/serde-rs/json/commit/c3670913423329c166add9d85ecdfc3e3da21e7a"><code>c367091</code></a>
      Merge pull request <a
      href="https://redirect.github.com/serde-rs/json/issues/1095">#1095</a>
      from dtolnay/hashtest</li>
      <li><a
      href="https://github.com/serde-rs/json/commit/b328ee7df4dd772922f084600aa7cea39218b694"><code>b328ee7</code></a>
      Eliminate hash closure in favor of calling hash_one directly</li>
      <li><a
      href="https://github.com/serde-rs/json/commit/b9bcbad3c094042f79f1a45189ec0edbb8f9f322"><code>b9bcbad</code></a>
      Use BuildHasher::hash_one</li>
      <li><a
      href="https://github.com/serde-rs/json/commit/7ff6c9e30c2ecc2cdcf089ed86c7ccfe7a41721c"><code>7ff6c9e</code></a>
      Use random hasher state for number hashing test</li>
      <li><a
      href="https://github.com/serde-rs/json/commit/fe031cd1de4dde5b47e0f18934632b41bd18b48d"><code>fe031cd</code></a>
      Delete trace_macros! functionality from test</li>
      <li>Additional commits viewable in <a
      href="https://github.com/serde-rs/json/compare/v1.0.108...v1.0.110">compare
      view</a></li>
      </ul>
      </details>
      <br />
      
      Updates `clap` from 4.4.11 to 4.4.12
      <details>
      <summary>Release notes</summary>
      <p><em>Sourced from <a
      href="https://github.com/clap-rs/clap/releases">clap's
      releases</a>.</em></p>
      <blockquote>
      <h2>v4.4.12</h2>
      <h2>[4.4.12] - 2023-12-28</h2>
      <h3>Performance</h3>
      <ul>
      <li>Only ask <code>TypedValueParser</code> for possible values if
      needed</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Changelog</summary>
      <p><em>Sourced from <a
      href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
      changelog</a>.</em></p>
      <blockquote>
      <h2>[4.4.12] - 2023-12-28</h2>
      <h3>Performance</h3>
      <ul>
      <li>Only ask <code>TypedValueParser</code> for possible values if
      needed</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Commits</summary>
      <ul>
      <li><a
      href="https://github.com/clap-rs/clap/commit/6d601e6f312857d78f47741268f1748840484d4a"><code>6d601e6</code></a>
      chore: Release</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/048e7f0fbc4f8108894e4307af768c8d332a0576"><code>048e7f0</code></a>
      docs: Update changelog</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/53f5b820988c1c03f0d2696fc144857ad461edc1"><code>53f5b82</code></a>
      Merge pull request <a
      href="https://redirect.github.com/clap-rs/clap/issues/5267">#5267</a>
      from vermiculus/sa/avoid-pv-expansion-in-help</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/05cd057978db743a65fb5fde33213af752d064e7"><code>05cd057</code></a>
      perf: Avoid retrieving possible_values unless used</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/29208083b0598ba7d1b80e79821c0ba3eb2342ce"><code>2920808</code></a>
      test: Update snapshots</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/28763ebb6d8714f6ca588bf477729040e0e760b0"><code>28763eb</code></a>
      chore: Release</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/ace7bb5b4570b030f7c2d0fa91e0afaaac1b0030"><code>ace7bb5</code></a>
      docs(complete): Update changelog</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/76beca4d4d42a817bbb578f23553c64ded2aea97"><code>76beca4</code></a>
      docs(complete): Polish API reference for dynamic</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/3630e582d3ec59912b8e9369c38687695ddb1f43"><code>3630e58</code></a>
      Merge pull request <a
      href="https://redirect.github.com/clap-rs/clap/issues/5273">#5273</a>
      from epage/docsrs</li>
      <li><a
      href="https://github.com/clap-rs/clap/commit/3724b9e2e4c2a2e69337b6d809949b246d3fef39"><code>3724b9e</code></a>
      docs: Include more content on docs.rs</li>
      <li>See full diff in <a
      href="https://github.com/clap-rs/clap/compare/v4.4.11...v4.4.12">compare
      view</a></li>
      </ul>
      </details>
      <br />
      
      Updates `serde_yaml` from 0.9.29 to 0.9.30
      <details>
      <summary>Release notes</summary>
      <p><em>Sourced from <a
      href="https://github.com/dtolnay/serde-yaml/releases">serde_yaml's
      releases</a>.</em></p>
      <blockquote>
      <h2>0.9.30</h2>
      <ul>
      <li>Update proc-macro2 to fix caching issue when using a rustc-wrapper
      such as sccache</li>
      </ul>
      </blockquote>
      </details>
      <details>
      <summary>Commits</summary>
      <ul>
      <li><a
      href="https://github.com/dtolnay/serde-yaml/commit/09ee25156f608f95150b27edd120bd5471db3c64"><code>09ee251</code></a>
      Release 0.9.30</li>
      <li><a
      href="https://github.com/dtolnay/serde-yaml/commit/caea939ece85ab54ac41de0672d683905f1e406a"><code>caea939</code></a>
      Pull in proc-macro2 sccache fix</li>
      <li><a
      href="https://github.com/dtolnay/serde-yaml/commit/d255918c141fd72d01f169bb5aa0152234981699"><code>d255918</code></a>
      Merge pull request <a
      href="https://redirect.github.com/dtolnay/serde-yaml/issues/403">#403</a>
      from dtolnay/optionifletelse</li>
      <li><a
      href="https://github.com/dtolnay/serde-yaml/commit/8cfeedd766f83dab24d03b9fb11b72886a247425"><code>8cfeedd</code></a>
      Remove option_if_let_else clippy suppression</li>
      <li>See full diff in <a
      href="https://github.com/dtolnay/serde-yaml/compare/0.9.29...0.9.30">compare
      view</a></li>
      </ul>
      </details>
      <br />
      
      
      Dependabot will resolve any conflicts with this PR as long as you don't
      alter it yourself. You can also trigger a rebase manually by commenting
      `@dependabot rebase`.
      
      [//]: # (dependabot-automerge-start)
      [//]: # (dependabot-automerge-end)
      
      ---
      
      <details>
      <summary>Dependabot commands and options</summary>
      <br />
      
      You can trigger Dependabot actions by commenting on this PR:
      - `@dependabot rebase` will rebase this PR
      - `@dependabot recreate` will recreate this PR, overwriting any edits
      that have been made to it
      - `@dependabot merge` will merge this PR after your CI passes on it
      - `@dependabot squash and merge` will squash and merge this PR after
      your CI passes on it
      - `@dependabot cancel merge` will cancel a previously requested merge
      and block automerging
      - `@dependabot reopen` will reopen this PR if it is closed
      - `@dependabot close` will close this PR and stop Dependabot recreating
      it. You can achieve the same result by closing it manually
      - `@dependabot show <dependency name> ignore conditions` will show all
      of the ignore conditions of the specified dependency
      - `@dependabot ignore <dependency name> major version` will close this
      group update PR and stop Dependabot creating any more for the specific
      dependency's major version (unless you unignore this specific
      dependency's major version or upgrade to it yourself)
      - `@dependabot ignore <dependency name> minor version` will close this
      group update PR and stop Dependabot creating any more for the specific
      dependency's minor version (unless you unignore this specific
      dependency's minor version or upgrade to it yourself)
      - `@dependabot ignore <dependency name>` will close this group update PR
      and stop Dependabot creating any more for the specific dependency
      (unless you unignore this specific dependency or upgrade to it yourself)
      - `@dependabot unignore <dependency name>` will remove all of the ignore
      conditions of the specified dependency
      - `@dependabot unignore <dependency name> <ignore condition>` will
      remove the ignore condition of the specified dependency and ignore
      conditions
      
      
      </details>
      
      Signed-off-by: default avatardependabot[bot] <[email protected]>
      Co-authored-by: default avatardependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
      88e7b49c
  27. Dec 21, 2023
  28. Dec 20, 2023
    • Muharem Ismailov's avatar
      pallet-asset-conversion: Decoupling Native Currency Dependancy (#2031) · 4f832ea8
      Muharem Ismailov authored
      closes https://github.com/paritytech/polkadot-sdk/issues/1842
      
      Decoupling Pallet from the Concept of Native Currency
      
      Currently, the pallet is intrinsically linked with the concept of native
      currency, requiring users to provide implementations of the
      `fungible::*` and `fungibles::*` traits to interact with native and non
      native assets. This incapsulates some non-related to the pallet
      complexity and makes it less adaptable in contexts where the native
      currency concept is absent.
      
      With this PR, the dependence on `fungible::*` for liquidity-supplying
      assets has been removed. Instead, the native and non-native currencies'
      handling is now overseen by a single type that implements the
      `fungibles::*` traits. To simplify this integration, types have been
      introduced to facilitate the creation of a union between `fungible::*`
      and `fungibles::*` implementations, producing a unified `fungibles::*`
      type.
      
      One of the reasons driving these changes is the ambition to create a
      more user-friendly API for the `SwapCredit` implementation. Given that
      it interacts with two distinct credit types from `fungible` and
      `fungibles`, a unified type was introduced. Clients now manage potential
      conversion failures for those credit types. In certain contexts, it's
      vital to guarantee that operations are fail-safe, like in this impl -
      [PR](https://github.com/paritytech/polkadot-sdk/pull/1845), place in
      [code](https://github.com/paritytech/polkadot-sdk/blob/20b85a5f
      
      /cumulus/primitives/utility/src/lib.rs#L429).
      
      Additional Updates:
      - abstracted the pool ID and its account derivation logic via trait
      bounds, along with common implementation offerings;
      - removed `inc_providers` on a pool creation for the pool account;
      - benchmarks:
      -- swap complexity is N, not const;
      -- removed `From<u128> + Into<u128>` bound from `T::Balance`;
      -- removed swap/liquidity/.. amount constants, resolve them dynamically
      based on pallet configuration;
      -- migrated to v2 API;
      - `OnUnbalanced` handler for the pool creation fee, replacing direct
      transfers to a specified account ID;
      - renamed `MultiAssetId` to `AssetKind` aligning with naming across
      frame crates;
      
      related PRs:
      - (depends) https://github.com/paritytech/polkadot-sdk/pull/1677
      - (caused) https://github.com/paritytech/polkadot-sdk/pull/2033
      - (caused) https://github.com/paritytech/polkadot-sdk/pull/1876
      
      ---------
      
      Co-authored-by: default avatarjoe petrowski <[email protected]>
      Co-authored-by: default avatarLiam Aharon <[email protected]>
      4f832ea8
  29. Dec 19, 2023
    • Muharem Ismailov's avatar
      pallet-asset-conversion: Swap Credit (#1677) · 5ce04514
      Muharem Ismailov authored
      
      
      Introduces a swap implementation that allows the exchange of a credit
      (aka Negative Imbalance) of one asset for a credit of another asset.
      
      This is particularly useful when a credit swap is required but may not
      have sufficient value to meet the ED constraint, hence cannot be
      deposited to temp account before. An example use case is when XCM fees
      are paid using an asset held in the XCM executor registry and has to be
      swapped for native currency.
      
      Additional Updates:
      - encapsulates the existing `Swap` trait impl within a transactional
      context, since partial storage mutation is possible when an error
      occurs;
      - supplied `Currency` and `Assets` impls must be implemented over the
      same `Balance` type, the `AssetBalance` generic type is dropped. This
      helps to avoid numerous type conversion and overflow cases. If those
      types are different it should be handled outside of the pallet;
      - `Box` asset kind on a pallet level, unbox on a runtime level - here
      [why](https://substrate.stackexchange.com/questions/10039/boxed-argument-of-a-dispatchable/10103#10103);
      - `path` uses `Vec` now, instead of `BoundedVec` since it is never used
      in PoV;
      - removes the `Transfer` event due to it's redundancy with the events
      emitted by `fungible/s` implementations;
      - modifies the `SwapExecuted` event type;
      
      related issue: 
      - https://github.com/paritytech/polkadot-sdk/issues/105
      
      related PRs:
      - (required for) https://github.com/paritytech/polkadot-sdk/pull/1845
      - (caused) https://github.com/paritytech/polkadot-sdk/pull/1717
      
      // DONE make the pallet work only with `fungibles` trait and make it
      free from the concept of a `native` asset -
      https://github.com/paritytech/polkadot-sdk/issues/1842
      
      ---------
      
      Co-authored-by: default avatarjoe petrowski <[email protected]>
      5ce04514
    • joe petrowski's avatar
      Rococo/Westend Coretime Runtime · 2e70dd3b
      joe petrowski authored
      
      
      New runtimes for the Coretime Chain (a.k.a. "Broker Chain") described in
      RFC-1.
      
      Replaces https://github.com/paritytech/cumulus/pull/2889
      
      
      - [x] Add Agile Coretime pallet
      https://github.com/paritytech/substrate/pull/14568
      - [x] Generate chain specs for local and testnets
      - [x] Deploy parachain on Rococo - Done:
      [rococo-coretime-rpc.polkadot.io](https://polkadot.js.org/apps/?rpc=wss%3A%2F%2Frococo-coretime-rpc.polkadot.io#/explorer)
      
      DevOps issue for Aura keygen:
      https://github.com/paritytech/devops/issues/2725
      
      Edit (Dónal): This PR is mainly for Rococo, the Westend runtime is a
      shell with no `Broker` pallet. The Rococo runtime has the broker calls
      filtered for initial deployment.
      
      ---------
      
      Co-authored-by: default avatarDónal Murray <[email protected]>
      Co-authored-by: default avatar0xmovses <[email protected]>
      Co-authored-by: default avatarLiam Aharon <[email protected]>
      Co-authored-by: default avatarBastian Köcher <[email protected]>
      Co-authored-by: default avatarMarcin S. <[email protected]>
      Co-authored-by: default avatarBastian Köcher <[email protected]>
      Co-authored-by: command-bot <>
      Co-authored-by: default avatarBranislav Kontur <[email protected]>
      2e70dd3b
  30. Dec 15, 2023
    • Ankan's avatar
      [NPoS] Remove better solution threshold for unsigned submissions (#2694) · ffb2125f
      Ankan authored
      closes https://github.com/paritytech-secops/srlabs_findings/issues/78.
      
      Removes `BetterUnsignedThreshold` from pallet EPM. This will essentially
      mean any solution submitted by the validator that is strictly better
      than the current queued solution would be accepted.
      
      The reason for having these thresholds is to limit number of solutions
      submitted on-chain. However for unsigned submissions, the number of
      solutions that could be submitted on average is limited even without
      thresholding (calculation shown in the corresponding issue).
      ffb2125f
    • gupnik's avatar
      Feature gate `do_task` in `frame_system` (#2707) · 11edbaf6
      gupnik authored
      https://github.com/paritytech/polkadot-sdk/pull/1343/ introduced Tasks
      API. This one moves `do_task` call in frame_system under the
      experimental flag, till the previous one is audited.
      
      ---------
      
      Co-authored-by: command-bot <>
      11edbaf6