- Mar 01, 2024
-
-
Egor_P authored
This PR backports Node version and `spec_version` bumps to `1.8.0` from the latest release and orders prdoc files related to it.
-
Francisco Aguirre authored
If an XCM execution fails or ends with leftover assets, these will be trapped. In order to claim them, a custom XCM has to be executed, with the `ClaimAsset` instruction. However, arbitrary XCM execution is not allowed everywhere yet and XCM itself is still not easy enough to use for users out there with trapped assets. This new extrinsic in `pallet-xcm` will allow these users to easily claim their assets, without concerning themselves with writing arbitrary XCMs. Part of fixing https://github.com/paritytech/polkadot-sdk/issues/3495 --------- Co-authored-by: command-bot <> Co-authored-by:
Adrian Catangiu <[email protected]>
-
- Feb 28, 2024
-
-
Oliver Tale-Yazdi authored
This MR is the merge of https://github.com/paritytech/substrate/pull/14414 and https://github.com/paritytech/substrate/pull/14275. It implements [RFC#13](https://github.com/polkadot-fellows/RFCs/pull/13), closes https://github.com/paritytech/polkadot-sdk/issues/198. ----- This Merge request introduces three major topicals: 1. Multi-Block-Migrations 1. New pallet `poll` hook for periodic service work 1. Replacement hooks for `on_initialize` and `on_finalize` in cases where `poll` cannot be used and some more general changes to FRAME. The changes for each topical span over multiple crates. They are listed in topical order below. # 1.) Multi-Block-Migrations Multi-Block-Migrations are facilitated by creating `pallet_migrations` and configuring `System::Config::MultiBlockMigrator` to point to it. Executive picks this up and triggers one step of the migrations pallet per block. The chain is in lockdown mode for as long as an MBM is ongoing. Executive does this by polling `MultiBlockMigrator::ongoing` and not allowing any transaction in a block, if true. A MBM is defined through trait `SteppedMigration`. A condensed version looks like this: ```rust /// A migration that can proceed in multiple steps. pub trait SteppedMigration { type Cursor: FullCodec + MaxEncodedLen; type Identifier: FullCodec + MaxEncodedLen; fn id() -> Self::Identifier; fn max_steps() -> Option<u32>; fn step( cursor: Option<Self::Cursor>, meter: &mut WeightMeter, ) -> Result<Option<Self::Cursor>, SteppedMigrationError>; } ``` `pallet_migrations` can be configured with an aggregated tuple of these migrations. It then starts to migrate them one-by-one on the next runtime upgrade. Two things are important here: - 1. Doing another runtime upgrade while MBMs are ongoing is not a good idea and can lead to messed up state. - 2. **Pallet Migrations MUST BE CONFIGURED IN `System::Config`, otherwise it is not used.** The pallet supports an `UpgradeStatusHandler` that can be used to notify external logic of upgrade start/finish (for example to pause XCM dispatch). Error recovery is very limited in the case that a migration errors or times out (exceeds its `max_steps`). Currently the runtime dev can decide in `FailedMigrationHandler::failed` how to handle this. One follow-up would be to pair this with the `SafeMode` pallet and enact safe mode when an upgrade fails, to allow governance to rescue the chain. This is currently not possible, since governance is not `Mandatory`. ## Runtime API - `Core`: `initialize_block` now returns `ExtrinsicInclusionMode` to inform the Block Author whether they can push transactions. ### Integration Add it to your runtime implementation of `Core` and `BlockBuilder`: ```patch diff --git a/runtime/src/lib.rs b/runtime/src/lib.rs @@ impl_runtime_apis! { impl sp_block_builder::Core<Block> for Runtime { - fn initialize_block(header: &<Block as BlockT>::Header) { + fn initialize_block(header: &<Block as BlockT>::Header) -> RuntimeExecutiveMode { Executive::initialize_block(header) } ... } ``` # 2.) `poll` hook A new pallet hook is introduced: `poll`. `Poll` is intended to replace mostly all usage of `on_initialize`. The reason for this is that any code that can be called from `on_initialize` cannot be migrated through an MBM. Currently there is no way to statically check this; the implication is to use `on_initialize` as rarely as possible. Failing to do so can result in broken storage invariants. The implementation of the poll hook depends on the `Runtime API` changes that are explained above. # 3.) Hard-Deadline callbacks Three new callbacks are introduced and configured on `System::Config`: `PreInherents`, `PostInherents` and `PostTransactions`. These hooks are meant as replacement for `on_initialize` and `on_finalize` in cases where the code that runs cannot be moved to `poll`. The reason for this is to make the usage of HD-code (hard deadline) more explicit - again to prevent broken invariants by MBMs. # 4.) FRAME (general changes) ## `frame_system` pallet A new memorize storage item `InherentsApplied` is added. It is used by executive to track whether inherents have already been applied. Executive and can then execute the MBMs directly between inherents and transactions. The `Config` gets five new items: - `SingleBlockMigrations` this is the new way of configuring migrations that run in a single block. Previously they were defined as last generic argument of `Executive`. This shift is brings all central configuration about migrations closer into view of the developer (migrations that are configured in `Executive` will still work for now but is deprecated). - `MultiBlockMigrator` this can be configured to an engine that drives MBMs. One example would be the `pallet_migrations`. Note that this is only the engine; the exact MBMs are injected into the engine. - `PreInherents` a callback that executes after `on_initialize` but before inherents. - `PostInherents` a callback that executes after all inherents ran (including MBMs and `poll`). - `PostTransactions` in symmetry to `PreInherents`, this one is called before `on_finalize` but after all transactions. A sane default is to set all of these to `()`. Example diff suitable for any chain: ```patch @@ impl frame_system::Config for Test { type MaxConsumers = ConstU32<16>; + type SingleBlockMigrations = (); + type MultiBlockMigrator = (); + type PreInherents = (); + type PostInherents = (); + type PostTransactions = (); } ``` An overview of how the block execution now looks like is here. The same graph is also in the rust doc. <details><summary>Block Execution Flow</summary> <p> ![Screenshot 2023-12-04 at 19 11 29](https://github.com/paritytech/polkadot-sdk/assets/10380170/e88a80c4-ef11-4faa-8df5-8b33a724c054) </p> </details> ## Inherent Order Moved to https://github.com/paritytech/polkadot-sdk/pull/2154 --------------- ## TODO - [ ] Check that `try-runtime` still works - [ ] Ensure backwards compatibility with old Runtime APIs - [x] Consume weight correctly - [x] Cleanup --------- Signed-off-by:
Oliver Tale-Yazdi <[email protected]> Co-authored-by:
Liam Aharon <[email protected]> Co-authored-by:
Juan Girini <[email protected]> Co-authored-by: command-bot <> Co-authored-by:
Francisco Aguirre <[email protected]> Co-authored-by:
Gavin Wood <[email protected]> Co-authored-by:
Bastian Köcher <[email protected]>
-
- Feb 26, 2024
-
-
Branislav Kontur authored
## Problem During the bumping of the `polkadot-fellows` repository to `[email protected]`, I encountered a situation where the benchmarks `teleport_assets` and `reserve_transfer_assets` in AssetHubKusama started to fail. This issue arose due to a decreased ED balance for AssetHubs introduced [here](https://github.com/polkadot-fellows/runtimes/pull/158/files#diff-80668ff8e793b64f36a9a3ec512df5cbca4ad448c157a5d81abda1b15f35f1daR213), and also because of a [missing CI pipeline](https://github.com/polkadot-fellows/runtimes/issues/197) to check the benchmarks, which went unnoticed. These benchmarks expect the `caller` to have enough: 1. balance to transfer (BTT) 2. balance for paying delivery (BFPD). So the initial balance was calculated as `ED * 100`, which seems reasonable: ``` const ED_MULTIPLIER: u32 = 100; let balance = existential_deposit.saturating_mul(ED_MULTIPLIER.into());` ``` The problem arises when the price for delivery is 100 times higher than the existential deposit. In other words, when `ED * 100` does not cover `BTT` + `BFPD`. I check AHR/AHW/AHK/AHP and this problem has only AssetHubKusama ``` ED: 3333333 calculated price to parent delivery: 1031666634 (from xcm logs from the benchmark) --- 3333333 * 100 - BTT(3333333) - BFPD(1031666634) = −701666667 ``` which results in the error; ``` 2024-02-23 09:19:42 Unable to charge fee with error Module(ModuleError { index: 31, error: [17, 0, 0, 0], message: Some("FeesNotMet") }) Error: Input("Benchmark pallet_xcm::reserve_transfer_assets failed: FeesNotMet") ``` ## Solution The benchmarks `teleport_assets` and `reserve_transfer_assets` were fixed by removing `ED * 100` and replacing it with `DeliveryHelper` logic, which calculates the (almost real) price for delivery and sets it along with the existential deposit as the initial balance for the account used in the benchmark. ## TODO - [ ] patch for 1.6 - https://github.com/paritytech/polkadot-sdk/pull/3466 - [ ] patch for 1.7 - https://github.com/paritytech/polkadot-sdk/pull/3465 - [ ] patch for 1.8 - TODO: PR --------- Co-authored-by:
Francisco Aguirre <[email protected]>
-
- Feb 12, 2024
-
-
Dónal Murray authored
Leases can be force set, but since Leases is a StorageValue, if a lease misses its sale rotation in which it should expire, it can never be cleared. This can happen if a lease is added with an until timeslice that lies in a region whose sale has already started or has passed, even if the timeslice itself hasn't passed. Trappist is currently trapped in a lease that will never end, so this will remove it at the next sale rotation. A fix was introduced in https://github.com/paritytech/polkadot-sdk/pull/3213 but this missed the 1.7 release. This PR bumps the `coretime-rococo` version to get these changes on Rococo.
-
- Feb 09, 2024
-
-
Egor_P authored
This PR backports version bumps from `1.7.0` release branch and moves related prdoc files to the appropriate folder.
-
- Feb 06, 2024
-
-
Branislav Kontur authored
Relates to: https://github.com/paritytech/polkadot-sdk/issues/3214 ## TODO - [ ] backport to the `1.7.0` release
-
- Feb 02, 2024
-
-
Marcin S. authored
Built on top of https://github.com/paritytech/polkadot-sdk/pull/2826/ which was a trial run. Guide: https://github.com/w3f/polkadot-wiki/blob/master/docs/maintain/maintain-guides-async-backing.md --------- Signed-off-by:
georgepisaltu <[email protected]> Co-authored-by:
Branislav Kontur <[email protected]> Co-authored-by:
Dónal Murray <[email protected]> Co-authored-by:
Dmitry Sinyavin <[email protected]> Co-authored-by:
s0me0ne-unkn0wn <[email protected]> Co-authored-by:
Svyatoslav Nikolsky <[email protected]> Co-authored-by:
Bastian Köcher <[email protected]> Co-authored-by:
georgepisaltu <[email protected]>
-
- Jan 31, 2024
-
-
Branislav Kontur authored
[frame] `#[pallet::composite_enum]` improved variant count handling + removed `pallet_balances`'s `MaxHolds` config (#2657) I started this investigation/issue based on @liamaharon question [here](https://github.com/paritytech/polkadot-sdk/pull/1801#discussion_r1410452499). ## Problem The `pallet_balances` integrity test should correctly detect that the runtime has correct distinct `HoldReasons` variant count. I assume the same situation exists for RuntimeFreezeReason. It is not a critical problem, if we set `MaxHolds` with a sufficiently large value, everything should be ok. However, in this case, the integrity_test check becomes less useful. **Situation for "any" runtime:** - `HoldReason` enums from different pallets: ```rust /// from pallet_nis #[pallet::composite_enum] pub enum HoldReason { NftReceipt, } /// from pallet_preimage #[pallet::composite_enum] pub enum HoldReason { Preimage, } // from pallet_state-trie-migration #[pallet::composite_enum] pub enum HoldReason { SlashForContinueMigrate, SlashForMigrateCustomTop, SlashForMigrateCustomChild, } ``` - generated `RuntimeHoldReason` enum looks like: ```rust pub enum RuntimeHoldReason { #[codec(index = 32u8)] Preimage(pallet_preimage::HoldReason), #[codec(index = 38u8)] Nis(pallet_nis::HoldReason), #[codec(index = 42u8)] StateTrieMigration(pallet_state_trie_migration::HoldReason), } ``` - composite enum `RuntimeHoldReason` variant count is detected as `3` - we set `type MaxHolds = ConstU32<3>` - `pallet_balances::integrity_test` is ok with `3`(at least 3) However, the real problem can occur in a live runtime where some functionality might stop working. This is due to a total of 5 distinct hold reasons (for pallets with multi-instance support, it is even more), and not all of them can be used because of an incorrect `MaxHolds`, which is deemed acceptable according to the `integrity_test`: ``` // pseudo-code - if we try to call all of these: T::Currency::hold(&pallet_nis::HoldReason::NftReceipt.into(), &nft_owner, deposit)?; T::Currency::hold(&pallet_preimage::HoldReason::Preimage.into(), &nft_owner, deposit)?; T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForContinueMigrate.into(), &nft_owner, deposit)?; // With `type MaxHolds = ConstU32<3>` these two will fail T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomTop.into(), &nft_owner, deposit)?; T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomChild.into(), &nft_owner, deposit)?; ``` ## Solutions A macro `#[pallet::*]` expansion is extended of `VariantCount` implementation for the `#[pallet::composite_enum]` enum type. This expansion generates the `VariantCount` implementation for pallets' `HoldReason`, `FreezeReason`, `LockId`, and `SlashReason`. Enum variants must be plain enum values without fields to ensure a deterministic count. The composite runtime enum, `RuntimeHoldReason` and `RuntimeFreezeReason`, now sets `VariantCount::VARIANT_COUNT` as the sum of pallets' enum `VariantCount::VARIANT_COUNT`: ```rust #[frame_support::pallet(dev_mode)] mod module_single_instance { #[pallet::composite_enum] pub enum HoldReason { ModuleSingleInstanceReason1, ModuleSingleInstanceReason2, } ... } #[frame_support::pallet(dev_mode)] mod module_multi_instance { #[pallet::composite_enum] pub enum HoldReason<I: 'static = ()> { ModuleMultiInstanceReason1, ModuleMultiInstanceReason2, ModuleMultiInstanceReason3, } ... } impl self::sp_api_hidden_includes_construct_runtime::hidden_include::traits::VariantCount for RuntimeHoldReason { const VARIANT_COUNT: u32 = 0 + module_single_instance::HoldReason::VARIANT_COUNT + module_multi_instance::HoldReason::<module_multi_instance::Instance1>::VARIANT_COUNT + module_multi_instance::HoldReason::<module_multi_instance::Instance2>::VARIANT_COUNT + module_multi_instance::HoldReason::<module_multi_instance::Instance3>::VARIANT_COUNT; } ``` In addition, `MaxHolds` is removed (as suggested [here](https://github.com/paritytech/polkadot-sdk/pull/2657#discussion_r1443324573)) from `pallet_balances`, and its `Holds` are now bounded to `RuntimeHoldReason::VARIANT_COUNT`. Therefore, there is no need to let the runtime specify `MaxHolds`. ## For reviewers Relevant changes can be found here: - `substrate/frame/support/procedural/src/lib.rs` - `substrate/frame/support/procedural/src/pallet/parse/composite.rs` - `substrate/frame/support/procedural/src/pallet/expand/composite.rs` - `substrate/frame/support/procedural/src/construct_runtime/expand/composite_helper.rs` - `substrate/frame/support/procedural/src/construct_runtime/expand/hold_reason.rs` - `substrate/frame/support/procedural/src/construct_runtime/expand/freeze_reason.rs` - `substrate/frame/support/src/traits/misc.rs` And the rest of the files is just about removed `MaxHolds` from `pallet_balances` ## Next steps Do the same for `MaxFreezes` https://github.com/paritytech/polkadot-sdk/issues/2997 . --------- Co-authored-by: command-bot <> Co-authored-by:
Bastian Köcher <[email protected]> Co-authored-by:
Dónal Murray <[email protected]> Co-authored-by:
gupnik <[email protected]>
-
Branislav Kontur authored
The `parachains-common` contains a lots of constants and type definitions which are used for `polkadot-sdk`'s testnet runtimes and also for `polkadot-fellows`'s production [SP runtimes](https://github.com/polkadot-fellows/runtimes/tree/main/system-parachains/constants). This PR cleans `parachains-common` module to contain only common and generic functionality. Testnet-specific constants have been moved to the separate module dedicated just for testnets: `polkadot-sdk/cumulus/parachains/runtimes/constants/` Part of: https://github.com/paritytech/polkadot-sdk/issues/3054 --------- Co-authored-by:
georgepisaltu <[email protected]>
-
- Jan 30, 2024
-
-
Oliver Tale-Yazdi authored
Reverts paritytech/polkadot-sdk#2302.
🤦 ♂️ should have checked the migration CI first. We either need to reduce the `max_message_size` for the open HRMP channels on the failing chains or increase the `PageSize` of the XCMP queue. Both would be fine on a test-net, but i assume this will also fail before the next SP runtime upgrade so first need to think what best to do. AFAIK its not possible currently to change the `max_message_size` of an open HRMP channel.
-
- Jan 29, 2024
-
-
Oliver Tale-Yazdi authored
Remove `without_storage_info` from the XCMP queue pallet. Part of https://github.com/paritytech/polkadot-sdk/issues/323 Changes: - Limit the number of channels that can be suspended at the same time. - Limit the number of channels that can have messages or signals pending at the same time. A No-OP migration is put in place to ensure that all `BoundedVec`s still decode and not truncate after upgrade. The storage version is thereby bumped to 4 to have our tooling remind us to deploy that migration. --------- Signed-off-by:
Oliver Tale-Yazdi <[email protected]> Co-authored-by:
Francisco Aguirre <[email protected]>
-
- Jan 24, 2024
-
-
Just van Stam authored
Moved from: https://github.com/paritytech/polkadot/pull/6951 closes https://github.com/paritytech/polkadot-sdk/issues/490 - [x] update cumulus --- This PR introduces transactional processing of certain xcm instructions. For the list of instructions checkout https://github.com/paritytech/polkadot-sdk/issues/490. The transactional processing is implemented as an xcm-executor config item. The two implementations in this PR are `FrameTransactionalProcessor` and `()`. The `()` implementation does no transactional processing. Each implementation of the `ProcessTransaction` trait has an `IS_TRANSACTIONAL` const that tells the XCVM if transactional processing is actually implemented. If Transactional processing is implemented, changes to touched registers should also be rolled back to prevent inconsistencies. Note for reviewers: Check out the following safety assumption: https://github.com/paritytech/polkadot-sdk/pull/1222/files#diff-4effad7d8c1c9de19fd27e18661cbf2128c8718f3b2420a27d2f816e0749ea53R30 --------- Co-authored-by:
Keith Yeung <[email protected]> Co-authored-by:
Francisco Aguirre <[email protected]> Co-authored-by: command-bot <>
-
- Jan 16, 2024
-
-
Francisco Aguirre authored
# Note for reviewer Most changes are just syntax changes necessary for the new version. Most important files should be the ones under the `xcm` folder. # Description Added XCMv4. ## Removed `Multi` prefix The following types have been renamed: - MultiLocation -> Location - MultiAsset -> Asset - MultiAssets -> Assets - InteriorMultiLocation -> InteriorLocation - MultiAssetFilter -> AssetFilter - VersionedMultiAsset -> VersionedAsset - WildMultiAsset -> WildAsset - VersionedMultiLocation -> VersionedLocation In order to fix a name conflict, the `Assets` in `xcm-executor` were renamed to `HoldingAssets`, as they represent assets in holding. ## Removed `Abstract` asset id It was not being used anywhere and this simplifies the code. Now assets are just constructed as follows: ```rust let asset: Asset = (AssetId(Location::new(1, Here)), 100u128).into(); ``` No need for specifying `Concrete` anymore. ## Outcome is now a named fields struct Instead of ```rust pub enum Outcome { Complete(Weight), Incomplete(Weight, Error), Error(Error), } ``` we now have ```rust pub enum Outcome { Complete { used: Weight }, Incomplete { used: Weight, error: Error }, Error { error: Error }, } ``` ## Added Reanchorable trait Now both locations and assets implement this trait, making it easier to reanchor both. ## New syntax for building locations and junctions Now junctions are built using the following methods: ```rust let location = Location { parents: 1, interior: [Parachain(1000), PalletInstance(50), GeneralIndex(1984)].into() }; ``` or ```rust let location = Location::new(1, [Parachain(1000), PalletInstance(50), GeneralIndex(1984)]); ``` And they are matched like so: ```rust match location.unpack() { (1, [Parachain(id)]) => ... (0, Here) => ..., (1, [_]) => ..., } ``` This syntax is mandatory in v4, and has been also implemented for v2 and v3 for easier migration. This was needed to make all sizes smaller. # TODO - [x] Scaffold v4 - [x] Port github.com/paritytech/polkadot/pull/7236 - [x] Remove `Multi` prefix - [x] Remove `Abstract` asset id --------- Co-authored-by: command-bot <> Co-authored-by:
Keith Yeung <[email protected]>
-
Dónal Murray authored
Co-authored-by: command-bot <>
-
- Jan 08, 2024
-
-
Bastian Köcher authored
This adds a Zombienet test for Coretime. Requires: https://github.com/paritytech/polkadot-sdk/pull/2862 --------- Co-authored-by:
Javier Viola <[email protected]> Co-authored-by:
Javier Viola <[email protected]>
-
- Dec 27, 2023
-
-
eskimor authored
And have proper benchmarks. --------- Co-authored-by:
eskimor <[email protected]> Co-authored-by: command-bot <> Co-authored-by:
joe petrowski <[email protected]>
-
- Dec 26, 2023
-
-
Bastian Köcher authored
Adds more logging to the XCM execution for better debugging.
-
- Dec 22, 2023
-
-
joe petrowski authored
- Updates all safe call filters to allow `system::authorize_upgrade`. - Updates Coretime safe call filter to allow `sudo` and `system_set_storage`. - Update Coretime teleports to allow teleportation with other system chains. --------- Co-authored-by:
Bastian Köcher <[email protected]>
-
- Dec 21, 2023
-
-
eskimor authored
Also fixes: https://github.com/paritytech/polkadot-sdk/issues/1417 - [x] CoreIndex -> AssignmentProvider mapping will be able to change any time. - [x] Implement - [x] Provide Migrations - [x] Add and fix tests - [x] Implement bulk assigner logic - [x] bulk assigner tests - [x] Port over current assigner to use bulk designer (+ share on-demand with bulk): top-level assigner has core ranges: legacy, bulk - [x] Adjust migrations to reflect new assigner structure - [x] Move migration code to Assignment code directly and make it recursive (make it possible to skip releases) -> follow up ticket. - [x] Test migrations - [x] Add migration PR to runtimes repo -> follow up ticket. - [x] Wire up with actual UMP messages - [x] Write PR docs --------- Co-authored-by:
eskimor <[email protected]> Co-authored-by:
Bradley Olson <[email protected]> Co-authored-by:
BradleyOlson64 <[email protected]> Co-authored-by:
Anton Vilhelm Ásgeirsson <[email protected]> Co-authored-by:
antonva <[email protected]> Co-authored-by:
Bastian Köcher <[email protected]> Co-authored-by:
Marcin S. <[email protected]> Co-authored-by:
Bastian Köcher <[email protected]> Co-authored-by: command-bot <>
-
- Dec 19, 2023
-
-
joe petrowski authored
New runtimes for the Coretime Chain (a.k.a. "Broker Chain") described in RFC-1. Replaces https://github.com/paritytech/cumulus/pull/2889 - [x] Add Agile Coretime pallet https://github.com/paritytech/substrate/pull/14568 - [x] Generate chain specs for local and testnets - [x] Deploy parachain on Rococo - Done: [rococo-coretime-rpc.polkadot.io](https://polkadot.js.org/apps/?rpc=wss%3A%2F%2Frococo-coretime-rpc.polkadot.io#/explorer) DevOps issue for Aura keygen: https://github.com/paritytech/devops/issues/2725 Edit (Dónal): This PR is mainly for Rococo, the Westend runtime is a shell with no `Broker` pallet. The Rococo runtime has the broker calls filtered for initial deployment. --------- Co-authored-by:
Dónal Murray <[email protected]> Co-authored-by:
0xmovses <[email protected]> Co-authored-by:
Liam Aharon <[email protected]> Co-authored-by:
Bastian Köcher <[email protected]> Co-authored-by:
Marcin S. <[email protected]> Co-authored-by:
Bastian Köcher <[email protected]> Co-authored-by: command-bot <> Co-authored-by:
Branislav Kontur <[email protected]>
-
- Dec 12, 2023
-
-
Chevdor authored
This PR introduces a script and some templates to use the prdoc involved in a release and build: - the changelog - a simple draft of audience documentation Since the prdoc presence was enforced in the middle of the version 1.5.0, not all PRs did come with a `prdoc` file. This PR creates all the missing `prdoc` files with some minimum content allowing to properly generate the changelog. The generated content is **not** suitable for the audience documentation. The audience documentation will be possible with the next version, when all PR come with a proper `prdoc`. ## Assumptions - the prdoc files for release `vX.Y.Z` have been moved under `prdoc/X.Y.Z` - the changelog requires for now for the prdoc files to contain author + topic. Thos fields are optional. The build script can be called as: ``` VERSION=X.Y.Z ./scripts/release/build-changelogs.sh ``` Related: - #1408 --------- Co-authored-by:
EgorPopelyaev <[email protected]>
-
- Dec 06, 2023
-
-
Adrian Catangiu authored
# Motivation (+testing) ### Enable easy `ForeignAssets` transfers using `pallet-xcm` We had just previously added capabilities to teleport fees during reserve-based transfers, but what about reserve-transferring fees when needing to teleport some non-fee asset? This PR aligns everything under either explicit reserve-transfer, explicit teleport, or this new flexible `transfer_assets()` which can mix and match as needed with fewer artificial constraints imposed to the user. This will enable, for example, a (non-system) parachain to teleport their `ForeignAssets` assets to AssetHub while using DOT to pay fees. (the assets are teleported - as foreign assets should from their owner chain - while DOT used for fees can only be reserve-based transferred between said parachain and AssetHub). Added `xcm-emulator` tests for this scenario ^. # Description Reverts `(limited_)reserve_transfer_assets` to only allow reserve-based transfers for all `assets` including fees. Similarly `(limited_)teleport_assets` only allows teleports for all `assets` including fees. For complex combinations of asset transfers where assets and fees may have different reserves or different reserve/teleport trust configurations, users can use the newly added `transfer_assets()` extrinsic which is more flexible in allowing more complex scenarios. `assets` (excluding `fees`) must have same reserve location or otherwise be teleportable to `dest`. No limitations imposed on `fees`. - for local reserve: transfer assets to sovereign account of destination chain and forward a notification XCM to `dest` to mint and deposit reserve-based assets to `beneficiary`. - for destination reserve: burn local assets and forward a notification to `dest` chain to withdraw the reserve assets from this chain's sovereign account and deposit them to `beneficiary`. - for remote reserve: burn local assets, forward XCM to reserve chain to move reserves from this chain's SA to `dest` chain's SA, and forward another XCM to `dest` to mint and deposit reserve-based assets to `beneficiary`. - for teleports: burn local assets and forward XCM to `dest` chain to mint/teleport assets and deposit them to `beneficiary`. ## Review notes Only around 500 lines are prod code (see `pallet_xcm/src/lib.rs`), the rest of the PR is new tests and improving existing tests. --------- Co-authored-by: command-bot <>
-
- Dec 05, 2023
-
-
gupnik authored
-
- Dec 04, 2023
-
-
Serban Iorga authored
Removes obsolete fields from the `QueueConfigData` structure. For the remaining fields, if they use the old defaults, we replace them with the new defaults. Resolves: https://github.com/paritytech/polkadot-sdk/issues/1795
-
- Nov 29, 2023
-
-
PG Herveou authored
see #2189 This PR does the following: - Bring the user api functions into a new pallet-contracts-uapi (They are currently defined in ink! [here])(https://github.com/paritytech/ink/blob/master/crates/env/src/engine/on_chain/ext.rs ) - Add older api versions and unstable to the user api trait. - Remove pallet-contracts-primitives and bring the types it defined in uapi / pallet-contracts - Add the infrastructure to build fixtures from Rust files and test it works by replacing `dummy.wat` and `call.wat` - Move all the doc from wasm/runtime.rs to pallet-contracts-uapi. This will be done in a follow up: - convert the rest of the test from .wat to rust - bring risc-v uapi up to date with wasm - finalize the uapi host fns, making sure everything is codegen from the source host fns in pallet-contracts --------- Co-authored-by:
Alexander Theißen <[email protected]>
-
- Nov 27, 2023
-
-
Chevdor authored
## Overview This PR aligns the `spec_version` formatting to the [recent changes](https://github.com/polkadot-fellows/runtimes/pull/26/files#diff-efa4caeb17487ecb13d8f5eb7863c3241d84afa2e73fbf25909a2ca89df0f362R142 ) made for the Polkadot/Kusama runtimes. It also backports the latest version `v1.4.0` bumps as `1_004_000`. ## Details During the switch from `v0.9` to `v1.x`, the format of the `spec_version` was modified from: `(M)m_ppp` for a runtime considered on version `M.m.pp`. For instance `0.9.42` had a `spec_version` of `9420`. With the transition to `v1.x`, the format was changed to a bigger number (still `u32`) formatted as `MM_mm_ppp` where `1.2.3` would be stored as `01_02_003`. This PR aligns the format with that has been introduced in the fellowship repo: `MMM_mmm_ppp`. --------- Co-authored-by:
Bastian Köcher <[email protected]>
-
- Nov 17, 2023
-
-
Liam Aharon authored
Westend Collectives migration CI check can be fixed once we have https://github.com/paritytech/try-runtime-cli/pull/58, will open another PR once it is available. - [x] Remove deprecated `DmpQueue` pallet from Rococo Contracts, the migration is complete - [x] Fix Asset Hub Rococo storage versions - [x] Add migration check CI for Asset Hub Rococo and Westend Bridge Hub
-
- Nov 16, 2023
-
-
joe petrowski authored
Missed in https://github.com/paritytech/polkadot-sdk/pull/1672
-
- Nov 14, 2023
-
-
PG Herveou authored
-
- Nov 13, 2023
-
-
Adrian Catangiu authored
## Motivation `pallet-xcm` is the main user-facing interface for XCM functionality, including assets manipulation functions like `teleportAssets()` and `reserve_transfer_assets()` calls. While `teleportAsset()` works both ways, `reserve_transfer_assets()` works only for sending reserve-based assets to a remote destination and beneficiary when the reserve is the _local chain_. ## Solution This PR enhances `pallet_xcm::(limited_)reserve_withdraw_assets` to support transfers when reserves are other chains. This will allow complete, **bi-directional** reserve-based asset transfers user stories using `pallet-xcm`. Enables following scenarios: - transferring assets with local reserve (was previously supported iff asset used as fee also had local reserve - now it works in all cases), - transferring assets with reserve on destination, - transferring assets with reserve on remote/third-party chain (iff assets and fees have same remote reserve), - transferring assets with reserve different than the reserve of the asset to be used as fees - meaning can be used to transfer random asset with local/dest reserve while using DOT for fees on all involved chains, even if DOT local/dest reserve doesn't match asset reserve, - transferring assets with any type of local/dest reserve while using fees which can be teleported between involved chains. All of the above is done by pallet inner logic without the user having to specify which scenario/reserves/teleports/etc. The correct scenario and corresponding XCM programs are identified, and respectively, built automatically based on runtime configuration of trusted teleporters and trusted reserves. #### Current limitations: - while `fees` and "non-fee" `assets` CAN have different reserves (or fees CAN be teleported), the remaining "non-fee" `assets` CANNOT, among themselves, have different reserve locations (this is also implicitly enforced by `MAX_ASSETS_FOR_TRANSFER=2`, but this can be safely increased in the future). - `fees` and "non-fee" `assets` CANNOT have **different remote** reserves (this could also be supported in the future, but adds even more complexity while possibly not being worth it - we'll see what the future holds). Fixes https://github.com/paritytech/polkadot-sdk/issues/1584 Fixes https://github.com/paritytech/polkadot-sdk/issues/2055 --------- Co-authored-by:
Francisco Aguirre <[email protected]> Co-authored-by:
Branislav Kontur <[email protected]>
-
- Nov 02, 2023
-
-
Oliver Tale-Yazdi authored
(imported from https://github.com/paritytech/cumulus/pull/2157) ## Changes This MR refactores the XCMP, Parachains System and DMP pallets to use the [MessageQueue](https://github.com/paritytech/substrate/pull/12485) for delayed execution of incoming messages. The DMP pallet is entirely replaced by the MQ and thereby removed. This allows for PoV-bounded execution and resolves a number of issues that stem from the current work-around. All System Parachains adopt this change. The most important changes are in `primitives/core/src/lib.rs`, `parachains/common/src/process_xcm_message.rs`, `pallets/parachain-system/src/lib.rs`, `pallets/xcmp-queue/src/lib.rs` and the runtime configs. ### DMP Queue Pallet The pallet got removed and its logic refactored into parachain-system. Overweight message management can be done directly through the MQ pallet. Final undeployment migrations are provided by `cumulus_pallet_dmp_queue::UndeployDmpQueue` and `DeleteDmpQueue` that can be configured with an aux config trait like: ```rust parameter_types! { pub const DmpQueuePalletName: &'static str = \"DmpQueue\" < CHANGE ME; pub const RelayOrigin: AggregateMessageOrigin = AggregateMessageOrigin::Parent; } impl cumulus_pallet_dmp_queue::MigrationConfig for Runtime { type PalletName = DmpQueuePalletName; type DmpHandler = frame_support::traits::EnqueueWithOrigin<MessageQueue, RelayOrigin>; type DbWeight = <Runtime as frame_system::Config>::DbWeight; } // And adding them to your Migrations tuple: pub type Migrations = ( ... cumulus_pallet_dmp_queue::UndeployDmpQueue<Runtime>, cumulus_pallet_dmp_queue::DeleteDmpQueue<Runtime>, ); ``` ### XCMP Queue pallet Removed all dispatch queue functionality. Incoming XCMP messages are now either: Immediately handled if they are Signals, enqueued into the MQ pallet otherwise. New config items for the XCMP queue pallet: ```rust /// The actual queue implementation that retains the messages for later processing. type XcmpQueue: EnqueueMessage<ParaId>; /// How a XCM over HRMP from a sibling parachain should be processed. type XcmpProcessor: ProcessMessage<Origin = ParaId>; /// The maximal number of suspended XCMP channels at the same time. #[pallet::constant] type MaxInboundSuspended: Get<u32>; ``` How to configure those: ```rust // Use the MessageQueue pallet to store messages for later processing. The `TransformOrigin` is needed since // the MQ pallet itself operators on `AggregateMessageOrigin` but we want to enqueue `ParaId`s. type XcmpQueue = TransformOrigin<MessageQueue, AggregateMessageOrigin, ParaId, ParaIdToSibling>; // Process XCMP messages from siblings. This is type-safe to only accept `ParaId`s. They will be dispatched // with origin `Junction::Sibling(…)`. type XcmpProcessor = ProcessFromSibling< ProcessXcmMessage< AggregateMessageOrigin, xcm_executor::XcmExecutor<xcm_config::XcmConfig>, RuntimeCall, >, >; // Not really important what to choose here. Just something larger than the maximal number of channels. type MaxInboundSuspended = sp_core::ConstU32<1_000>; ``` The `InboundXcmpStatus` storage item was replaced by `InboundXcmpSuspended` since it now only tracks inbound queue suspension and no message indices anymore. Now only sends the most recent channel `Signals`, as all prio ones are out-dated anyway. ### Parachain System pallet For `DMP` messages instead of forwarding them to the `DMP` pallet, it now pushes them to the configured `DmpQueue`. The message processing which was triggered in `set_validation_data` is now being done by the MQ pallet `on_initialize`. XCMP messages are still handed off to the `XcmpMessageHandler` (XCMP-Queue pallet) - no change here. New config items for the parachain system pallet: ```rust /// Queues inbound downward messages for delayed processing. /// /// Analogous to the `XcmpQueue` of the XCMP queue pallet. type DmpQueue: EnqueueMessage<AggregateMessageOrigin>; ``` How to configure: ```rust /// Use the MQ pallet to store DMP messages for delayed processing. type DmpQueue = MessageQueue; ``` ## Message Flow The flow of messages on the parachain side. Messages come in from the left via the `Validation Data` and finally end up at the `Xcm Executor` on the right. ![Untitled (1)](https://github.com/paritytech/cumulus/assets/10380170/6cf8b377-88c9-4aed-96df-baace266e04d) ## Further changes - Bumped the default suspension, drop and resume thresholds in `QueueConfigData::default()`. - `XcmpQueue::{suspend_xcm_execution, resume_xcm_execution}` errors when they would be a noop. - Properly validate the `QueueConfigData` before setting it. - Marked weight files as auto-generated so they wont auto-expand in the MR files view. - Move the `hypothetical` asserts to `frame_support` under the name `experimental_hypothetically` Questions: - [ ] What about the ugly `#[cfg(feature = \"runtime-benchmarks\")]` in the runtimes? Not sure how to best fix. Just having them like this makes tests fail that rely on the real message processor when the feature is enabled. - [ ] Need a good weight for `MessageQueueServiceWeight`. The scheduler already takes 80% so I put it to 10% but that is quite low. TODO: - [x] Remove c&p code after https://github.com/paritytech/polkadot/pull/6271 - [x] Use `HandleMessage` once it is public in Substrate - [x] fix `runtime-benchmarks` feature https://github.com/paritytech/polkadot/pull/6966 - [x] Benchmarks - [x] Tests - [ ] Migrate `InboundXcmpStatus` to `InboundXcmpSuspended` - [x] Possibly cleanup Migrations (DMP+XCMP) - [x] optional: create `TransformProcessMessageOrigin` in Substrate and replace `ProcessFromSibling` - [ ] Rerun weights on ref HW --------- Signed-off-by:
Oliver Tale-Yazdi <[email protected]> Co-authored-by:
Liam Aharon <[email protected]> Co-authored-by:
joe petrowski <[email protected]> Co-authored-by:
Kian Paimani <[email protected]> Co-authored-by: command-bot <>
-
- Oct 24, 2023
-
-
Kian Paimani authored
closes https://github.com/paritytech/polkadot-sdk/issues/1882 ## Breaking Changes This PR introduces a new item to `pallet_balances::Config`: ```diff trait Config { ++ type RuntimeFreezeReasons; } ``` This value is only used to check it against `type MaxFreeze`. A similar check has been added for `MaxHolds` against `RuntimeHoldReasons`, which is already given to `pallet_balances`. In all contexts, you should pass the real `RuntimeFreezeReasons` generated by `construct_runtime` to `type RuntimeFreezeReasons`. Passing `()` would also work, but it would imply that the runtime uses no freezes at all. --------- Signed-off-by:
Oliver Tale-Yazdi <[email protected]> Co-authored-by:
Oliver Tale-Yazdi <[email protected]>
-
- Oct 18, 2023
-
-
Keith Yeung authored
Combination of paritytech/polkadot#7005, its addon PR paritytech/polkadot#7585 and its companion paritytech/cumulus#2433. This PR introduces a new XcmFeesToAccount struct which implements the `FeeManager` trait, and assigns this struct as the `FeeManager` in the XCM config for all runtimes. The struct simply deposits all fees handled by the XCM executor to a specified account. In all runtimes, the specified account is configured as the treasury account. XCM __delivery__ fees are now being introduced (unless the root origin is sending a message to a system parachain on behalf of the originating chain). # Note for reviewers Most file changes are tests that had to be modified to account for the new fees. Main changes are in: - cumulus/pallets/xcmp-queue/src/lib.rs <- To make it track the delivery fees exponential factor - polkadot/xcm/xcm-builder/src/fee_handling.rs <- Added. Has the FeeManager implementation - All runtime xcm_config files <- To add the FeeManager to the XCM configuration # Important note After this change, instructions that create and send a new XCM (Query*, Report*, ExportMessage, InitiateReserveWithdraw, InitiateTeleport, DepositReserveAsset, TransferReserveAsset, LockAsset and RequestUnlock) will require the corresponding origin account in the origin register to pay for transport delivery fees, and the onward message will fail to be sent if the origin account does not have the required amount. This delivery fee is on top of what we already collect as tx fees in pallet-xcm and XCM BuyExecution fees! Wallet UIs that want to expose the new delivery fee can do so using the formula: ``` delivery_fee_factor * (base_fee + encoded_msg_len * per_byte_fee) ``` where the delivery fee factor can be obtained from the corresponding pallet based on which transport you are using (UMP, HRMP or bridges), the base fee is a constant, the encoded message length from the message itself and the per byte fee is the same as the configured per byte fee for txs (i.e. `TransactionByteFee`). --------- Co-authored-by:
Branislav Kontur <[email protected]> Co-authored-by:
joe petrowski <[email protected]> Co-authored-by:
Giles Cope <[email protected]> Co-authored-by: command-bot <> Co-authored-by:
Francisco Aguirre <[email protected]> Co-authored-by:
Liam Aharon <[email protected]> Co-authored-by:
Kian Paimani <[email protected]>
-
- Sep 27, 2023
-
-
Michal Kucharczyk authored
This PR implements [`GenesisBuilder` API](https://github.com/paritytech/polkadot-sdk/blob/a414ea7515c9cdc81f1d12410e646afc148250e8/substrate/primitives/genesis-builder/src/lib.rs#L38 ) for all the runtimes in polkadot repo. Step towards: paritytech/polkadot-sdk#25 --------- Co-authored-by:
ordian <[email protected]>
-
- Sep 05, 2023
-
-
joe petrowski authored
* add common libs * asset hubs * add westend * bridge hubs * collectives * contracts * emulated tests * parachain bin * delete collectives constants and update docs * integration tests should have apache license (some missing, some needed changing) * propagate features * fmt
-
- Aug 30, 2023
-
-
Przemek Rzad authored
* Add missing Cumulus licenses * Typo * Add missing Substrate licenses * Single job checking the sub-repos in steps * Remove dates * Remove dates * Add missing (C) * Update FRAME UI tests Signed-off-by:
Oliver Tale-Yazdi <[email protected]> * Update more UI tests Signed-off-by:
Oliver Tale-Yazdi <[email protected]> --------- Signed-off-by:
Oliver Tale-Yazdi <[email protected]> Co-authored-by:
Oliver Tale-Yazdi <[email protected]>
-
- Aug 24, 2023
-
-
Oliver Tale-Yazdi authored
* Fix aura config Signed-off-by:
Oliver Tale-Yazdi <[email protected]> * Fix Cargo.toml files Signed-off-by:
Oliver Tale-Yazdi <[email protected]> * Ignore feature-dependant tests Signed-off-by:
Oliver Tale-Yazdi <[email protected]> * Allow dead code Signed-off-by:
Oliver Tale-Yazdi <[email protected]> --------- Signed-off-by:
Oliver Tale-Yazdi <[email protected]>
-
- Aug 23, 2023
-
-
juangirini authored
* restructure macro related exports * restructure macro related exports * wip * wip * update cargo lock * refactor RuntimeDebug on unincluded segment * fmt * Companion: restructure `benchmarking` macro related exports (#3039) * wip * wip * restructure benchmarking macro related exports * add cargo lock --------- Co-authored-by: parity-processbot <>
-
- Aug 22, 2023
-
-
Egor_P authored
* Bump crate versions * Bump spec_version
-