Should help us to understand more what's happening between individual
runs and possibly adjust the number of runs

Makes https://github.com/paritytech/polkadot-sdk/pull/4035 easier to
review

Currently, PVFs are re-prepared if any execution environment parameter
changes. As we've recently seen on Kusama and Polkadot, that may lead to
a severe finality lag because every validator has to re-prepare every
PVF. That cannot be avoided altogether; however, we could cease
re-preparing PVFs when a change in the execution environment can't lead
to a change in the artifact itself. For example, it's clear that
changing the execution timeout cannot affect the artifact.

In this PR, I'm introducing a separate hash for the subset of execution
environment parameters that changes only if a preparation-related
parameter changes. It introduces some minor code duplication, but
without that, the scope of changes would be much bigger.

TODO:
- [x] Add a test to ensure the artifact is not re-prepared if
non-preparation-related parameter is changed
- [x] Add a test to ensure the artifact is re-prepared if a
preparation-related parameter is changed
- [x] Add comments, warnings, and, possibly, a test to ensure a new
parameter ever added to the executor environment parameters will be
evaluated by the author of changes with respect to its artifact
preparation impact and added to the new hash preimage if needed.

Closes #4132

... a few sessions too late :(, this already happened on polkadot, so as
of now there are no known relay-chains without async backing enabled in
runtime, but let's fix it in case someone else wants to repeat our
steps.

Fixes: https://github.com/paritytech/polkadot-sdk/issues/4226



---------

Signed-off-by: Alexandru Gheorghe <[email protected]>

Part of https://github.com/paritytech/polkadot-sdk/issues/4126

 we want
to safely increase the execute_workers_max_num gradually from chain to
chain and assess if there are any negative impacts.

This PR performs the necessary plumbing to be able to increase it based
on the chain id, it increase the number of execution workers from 2 to 4
on test network but lives kusama and polkadot unchanged until we gather
more data.

---------

Signed-off-by: Alexandru Gheorghe <[email protected]>

This is for adding onfinality polkadot bootnode. Please correct me if
this is not the right place for adding a new bootnode

Add a metric to be able to understand the time jobs are waiting in the
execution queue waiting for an available worker.
https://github.com/paritytech/polkadot-sdk/issues/4126



Signed-off-by: Alexandru Gheorghe <[email protected]>

Co-authored-by: alvicsam <[email protected]>

follow up of https://github.com/paritytech/polkadot-sdk/pull/2604
closes https://github.com/paritytech/polkadot-sdk/pull/2604

- [x] take relevant changes from Marcin's PR 
- [x] extract common duplicate code for workers (low-hanging fruits)

~Some unpassed ci problems are more general and should be fixed in
master (see https://github.com/paritytech/polkadot-sdk/pull/4074)~



Proposed labels: **T0-node**, **R0-silent**, **I4-refactor**

-----

kusama address: FZXVQLqLbFV2otNXs6BMnNch54CFJ1idpWwjMb3Z8fTLQC6

---------

Co-authored-by: s0me0ne-unkn0wn <[email protected]>

Related to https://github.com/paritytech/polkadot-sdk/issues/4126


discussion

Currently all preparations have same priority and this is not ideal in
all cases. This change should improve the finality time in the context
of on-demand parachains and when `ExecutorParams` are updated on-chain
and a rebuild of all artifacts is required. The desired effect is to
speed up approval and dispute PVF executions which require preparation
and delay backing executions which require preparation.

---------

Signed-off-by: Andrei Sandu <[email protected]>

- Returned latency (with it, results are more stable)
- The threshold is weakened
- Increased number of runs

approval-voting: Make sure we always mark approved candidates approved in a different relay chain context (#4153)

... see for more detail why this is needed

https://github.com/paritytech/polkadot-sdk/issues/4149#issuecomment-2058472444

## TODO:
- [x] Unittests
- [x] Replicate scenario from
https://github.com/paritytech/polkadot-sdk/issues/4149 and confirm this
fixes it: https://github.com/paritytech/polkadot-sdk/issues/4149

 [
Replicated on a zombienet with some hacked nodes, that we can end up in
this state where no-wake is schedule and the nodes are pending new
assignments]

---------

Signed-off-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Andrei Sandu <[email protected]>

The `next_retry_time` gets populated when a request receives an error
timeout or any other error, after thatn next_retry would check all
requests in the queue returns the smallest one, which then gets used to
move the main loop by creating a Delay
```
futures_timer::Delay::new(instant.saturating_duration_since(Instant::now())).await,
```

However when we retry a task for the first time we still keep it in the
queue an mark it as in flight so its next_retry_time would be the oldest
and it would be small than `now`, so the Delay will always triggers, so
that would make the main loop essentially busy wait untill we received a
response for the retry request.

Fix this by excluding the tasks that are already in-flight.

---------

Signed-off-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Andrei Sandu <[email protected]>

Block reversion of the current block is technically possible as can be
seen from

https://github.com/paritytech/polkadot-sdk/blob/39b1f50f1c251def87c1625d68567ed252dc6272/polkadot/runtime/parachains/src/disputes.rs#L1215-L1223

- [x] Fix the test

cc https://github.com/paritytech/ci_cd/issues/974



---------

Co-authored-by: command-bot <>
Co-authored-by: Bastian Köcher <[email protected]>

Will make https://github.com/paritytech/polkadot-sdk/pull/4035 easier to
review (the mentioned PR already does this move so the diff will be
clearer).

Also called out as part of:
https://github.com/paritytech/polkadot-sdk/pull/3233#discussion_r1490867383

Verified by running a node using `--reserved-only` and
`--reserved-nodes`.

Fixes https://github.com/paritytech/polkadot-sdk/issues/3576



Required by elastic scaling collators.
Deprecates old API: `candidate_pending_availability`.

TODO:
- [x] PRDoc

---------

Signed-off-by: Andrei Sandu <[email protected]>

Implements the idea from
https://github.com/paritytech/polkadot-sdk/pull/3899
- Removed latencies
- Number of runs reduced from 50 to 5, according to local runs it's
quite enough
- Network message is always sent in a spawned task, even if latency is
zero. Without it, CPU time sometimes spikes.
- Removed the `testnet` profile because we probably don't need that
debug additions.

After the local tests I can't say that it brings a significant
improvement in the stability of the results. However, I belive it is
worth trying and looking at the results over time.

fixes https://github.com/paritytech/polkadot-sdk/issues/4067



Also add an early bail out for look ahead collator such that we don't
waste time if a CollatorFn is not set.

TODO:
- [x] add test.
- [x] Polkadot System Parachain burn-in.

---------

Signed-off-by: Andrei Sandu <[email protected]>

This tiny PR extends the `on_validated_block_announce` log with the bad
PeerID.
Used to identify if the peerID is malicious by correlating with other
logs (ie peer-set).

While at it, have removed the `\n` from a multiline log, which did not
play well with
[sub-triage-logs](https://github.com/lexnv/sub-triage-logs/tree/master

).

cc @paritytech/networking

---------

Signed-off-by: Alexandru Vasile <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

This PR backports `spec_version`, `node_version` bumps and reordering of
the prdocs from the 1.10.0 release branch

[litep2p](https://github.com/altonen/litep2p) is a libp2p-compatible P2P
networking library. It supports all of the features of `rust-libp2p`
that are currently being utilized by Polkadot SDK.

Compared to `rust-libp2p`, `litep2p` has a quite different architecture
which is why the new `litep2p` network backend is only able to use a
little of the existing code in `sc-network`. The design has been mainly
influenced by how we'd wish to structure our networking-related code in
Polkadot SDK: independent higher-levels protocols directly communicating
with the network over links that support bidirectional backpressure. A
good example would be `NotificationHandle`/`RequestResponseHandle`
abstractions which allow, e.g., `SyncingEngine` to directly communicate
with peers to announce/request blocks.

I've tried running `polkadot --network-backend litep2p` with a few
different peer configurations and there is a noticeable reduction in
networking CPU usage. For high load (`--out-peers 200`), networking CPU
usage goes down from ~110% to ~30% (80 pp) and for normal load
(`--out-peers 40`), the usage goes down from ~55% to ~18% (37 pp).

These should not be taken as final numbers because:

a) there are still some low-hanging optimization fruits, such as
enabling [receive window
auto-tuning](https://github.com/libp2p/rust-yamux/pull/176

), integrating
`Peerset` more closely with `litep2p` or improving memory usage of the
WebSocket transport
b) fixing bugs/instabilities that incorrectly cause `litep2p` to do less
work will increase the networking CPU usage
c) verification in a more diverse set of tests/conditions is needed

Nevertheless, these numbers should give an early estimate for CPU usage
of the new networking backend.

This PR consists of three separate changes:
* introduce a generic `PeerId` (wrapper around `Multihash`) so that we
don't have use `NetworkService::PeerId` in every part of the code that
uses a `PeerId`
* introduce `NetworkBackend` trait, implement it for the libp2p network
stack and make Polkadot SDK generic over `NetworkBackend`
  * implement `NetworkBackend` for litep2p

The new library should be considered experimental which is why
`rust-libp2p` will remain as the default option for the time being. This
PR currently depends on the master branch of `litep2p` but I'll cut a
new release for the library once all review comments have been
addresses.

---------

Signed-off-by: Alexandru Vasile <[email protected]>
Co-authored-by: Dmitry Markin <[email protected]>
Co-authored-by: Alexandru Vasile <[email protected]>
Co-authored-by: Alexandru Vasile <[email protected]>

With Coretime enabled we can no longer assume there is a static 1:1
mapping between core index and para id. This mapping should be obtained
from the scheduler/claimqueue on block by block basis.

This PR modifies `para_id()` (from `CoreState`) to return the scheduled
`ParaId` for occupied cores and removes its usages in the code.

Closes https://github.com/paritytech/polkadot-sdk/issues/3948



---------

Co-authored-by: Andrei Sandu <[email protected]>

Signed-off-by: hongkuang <[email protected]>

Signed-off-by: divdeploy <[email protected]>

The runtime now can provide a number of predefined presets of
`RuntimeGenesisConfig` struct. This presets are intended to be used in
different deployments, e.g.: `local`, `staging`, etc, and should be
included into the corresponding chain-specs.

Having `GenesisConfig` presets in runtime allows to fully decouple node
from runtime types (the problem is described in #1984).

**Summary of changes:**
- The `GenesisBuilder` API was adjusted to enable this functionality
(and provide better naming - #150):
   ```rust
    fn preset_names() -> Vec<PresetId>;
fn get_preset(id: Option<PresetId>) -> Option<serde_json::Value>;
//`None` means default
    fn build_state(value: serde_json::Value);
    pub struct PresetId(Vec<u8>);
   ```

- **Breaking change**: Old `create_default_config` method was removed,
`build_config` was renamed to `build_state`. As a consequence a node
won't be able to interact with genesis config for older runtimes. The
cleanup was made for sake of API simplicity. Also IMO maintaining
compatibility with old API is not so crucial.
- Reference implementation was provided for `substrate-test-runtime` and
`rococo` runtimes. For rococo new
[`genesis_configs_presets`](https://github.com/paritytech/polkadot-sdk/blob/3b41d66b97c5ff0ec4a1989da5ffd8b9f3f588e3/polkadot/runtime/rococo/src/genesis_config_presets.rs#L530)
module was added and is used in `GenesisBuilder`
[_presets-related_](https://github.com/paritytech/polkadot-sdk/blob/3b41d66b97c5ff0ec4a1989da5ffd8b9f3f588e3/polkadot/runtime/rococo/src/lib.rs#L2462-L2485)
methods.

- The `chain-spec-builder` util was also improved and allows to
([_doc_](https://github.com/paritytech/polkadot-sdk/blob/3b41d66b97c5ff0ec4a1989da5ffd8b9f3f588e3/substrate/bin/utils/chain-spec-builder/src/lib.rs#L19)):
   - list presets provided by given runtime (`list-presets`),
- display preset or default config provided by the runtime
(`display-preset`),
   - build chain-spec using named preset (`create ... named-preset`),


- The `ChainSpecBuilder` is extended with
[`with_genesis_config_preset_name`](https://github.com/paritytech/polkadot-sdk/blob/3b41d66b97c5ff0ec4a1989da5ffd8b9f3f588e3/substrate/client/chain-spec/src/chain_spec.rs#L447)
method which allows to build chain-spec using named preset provided by
the runtime. Sample usage on the node side
[here](https://github.com/paritytech/polkadot-sdk/blob/2caffaae803e08a3d5b46c860e8016da023ff4ce/polkadot/node/service/src/chain_spec.rs#L404

).

Implementation of #1984.
fixes: #150
part of: #25

---------

Co-authored-by: Sebastian Kunert <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

Remove `fetch_next_scheduled_on_core` in favor of new wrapper and
methods for accessing it.

---------

Signed-off-by: Andrei Sandu <[email protected]>

fixes https://github.com/paritytech/polkadot-sdk/issues/3775



Additionally moves the claim queue fetch utilities into
`subsystem-util`.

TODO:
- [x] fix tests
- [x] add elastic scaling tests

---------

Signed-off-by: Andrei Sandu <[email protected]>

Working towards migrating the `parity-bridges-common` repo inside
`polkadot-sdk`. This PR upgrades some dependencies in order to align
them with the versions used in `parity-bridges-common`

Related to
https://github.com/paritytech/parity-bridges-common/issues/2538

This outputs:
```
2024-04-02 14:36:02.135 ERROR tokio-runtime-worker beefy: 🥩 for session starting at block 21990151
no BEEFY authority key found in store, you must generate valid session keys
(https://wiki.polkadot.network/docs/maintain-guides-how-to-validate-polkadot#generating-the-session-keys

)
```
error log entry, once every session, for nodes running with
`Role::Authority` that have no public BEEFY key in their keystore

---------

Co-authored-by: Bastian Köcher <[email protected]>

Rejoice! Rejoice! The story is nearly over.

This PR removes stale migrations, auxiliary structures, and package
dependencies, thus making Rococo and Westend totally free from any
`im-online`-related stuff.

`im-online` still stays a part of the Substrate node and its runtime:
https://github.com/paritytech/polkadot-sdk/blob/0d9324847391e902bb42f84f0e76096b1f764efe/substrate/bin/node/runtime/src/lib.rs#L2276-L2277
I'm not sure if it makes sense to remove it from there considering that
we're not removing `im-online` from FRAME. Please share your opinion.

Runtime release 1.2 includes bumping of the ParachainHost APIs up to
v10, so let's move all the released APIs out of vstaging folder, this PR
does not include any logic changes only renaming of the modules and some
moving around.

Signed-off-by: Alexandru Gheorghe <[email protected]>

The metric records the current protocol_version of the validator that
just connected with the peer_map.len(), which contains all peers that
connected, that has the effect the metric will be wrong since it won't
tell us how many peers we have connected per version because it will
always record the total number of peers

Fix this by counting by version inside peer_map, additionally because
that might be a bit heavier than len(), publish it only on-active
leaves.

---------

Signed-off-by: Alexandru Gheorghe <[email protected]>

Closes: https://github.com/paritytech/polkadot-sdk/issues/3906

Somehow https://github.com/paritytech/polkadot-sdk/pull/3795

 was merged
but tests are failing now on master. I suspect that CI is not even
running these tests anymore which is a big issue.

---------

Signed-off-by: Andrei Sandu <[email protected]>

This works only for collators that implement the `collator_fn` allowing
`collation-generation` subsystem to pull collations triggered on new
heads.

Also enables
`request_v2::CollationFetchingResponse::CollationWithParentHeadData` for
test adder/undying collators.

TODO:
- [x] fix tests
- [x] new tests
- [x] PR doc

---------

Signed-off-by: Andrei Sandu <[email protected]>