Closes https://github.com/paritytech/polkadot-sdk/issues/1966,
https://github.com/paritytech/polkadot-sdk/issues/1963 and
https://github.com/paritytech/polkadot-sdk/issues/1962.

Disabling strategy specification
[here](https://github.com/paritytech/polkadot-sdk/pull/2955). (Updated
13/02/2024)

Implements:
* validator disabling for a whole era instead of just a session
* no more than 1/3 of the validators in the active set are disabled
Removes:
* `DisableStrategy` enum - now each validator committing an offence is
disabled.
* New era is not forced if too many validators are disabled.

Before this PR not all offenders were disabled. A decision was made
based on [`enum
DisableStrategy`](https://github.com/paritytech/polkadot-sdk/blob/bbb66316/substrate/primitives/staking/src/offence.rs#L54).
Some offenders were disabled for a whole era, some just for a session,
some were not disabled at all.

This PR changes the disabling behaviour. Now a validator committing an
offense is disabled immediately till the end of the current era.

Some implementation notes:
* `OffendingValidators` in pallet session keeps all offenders (this is
not changed). However its type is changed from `Vec<(u32, bool)>` to
`Vec<u32>`. The reason is simple - each offender is getting disabled so
the bool doesn't make sense anymore.
* When a validator is disabled it is first added to
`OffendingValidators` and then to `DisabledValidators`. This is done in
[`add_offending_validator`](https://github.com/paritytech/polkadot-sdk/blob/bbb66316/substrate/frame/staking/src/slashing.rs#L325)
from staking pallet.
* In
[`rotate_session`](https://github.com/paritytech/polkadot-sdk/blob/bdbe9829/substrate/frame/session/src/lib.rs#L623)
the `end_session` also calls
[`end_era`](https://github.com/paritytech/polkadot-sdk/blob/bbb66316/substrate/frame/staking/src/pallet/impls.rs#L490)
when an era ends. In this case `OffendingValidators` are cleared
**(1)**.
* Then in
[`rotate_session`](https://github.com/paritytech/polkadot-sdk/blob/bdbe9829/substrate/frame/session/src/lib.rs#L623)
`DisabledValidators` are cleared **(2)**
* And finally (still in `rotate_session`) a call to
[`start_session`](https://github.com/paritytech/polkadot-sdk/blob/bbb66316

/substrate/frame/staking/src/pallet/impls.rs#L430)
repopulates the disabled validators **(3)**.
* The reason for this complication is that session pallet knows nothing
abut eras. To overcome this on each new session the disabled list is
repopulated (points 2 and 3). Staking pallet knows when a new era starts
so with point 1 it ensures that the offenders list is cleared.

---------

Co-authored-by: ordian <[email protected]>
Co-authored-by: ordian <[email protected]>
Co-authored-by: Maciej <[email protected]>
Co-authored-by: Gonçalo Pestana <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Ankan <[email protected]>

Introduce `PalletId` as an additional seed parameter for pool's account
id derivation.

The PR also introduces the `pallet_asset_conversion_ops` pallet with a
call to migrate a given pool to thew new account. Additionally
`fungibles::lifetime::ResetTeam` and `fungible::lifetime::Refund`
traits, to facilitate the migration of pools.

---------

Co-authored-by: command-bot <>

As discovered during investigation of
https://github.com/paritytech/polkadot-sdk/issues/3314 and
https://github.com/paritytech/polkadot-sdk/issues/3673 there are active
validators which accidentally might change their network key during
restart, that's not a safe operation when you are in the active set
because of distributed nature of DHT, so the old records would still
exist in the network until they expire 36h, so unless they have a good
reason validators should avoid changing their key when they restart
their nodes.

There is an effort in parallel to improve this situation
https://github.com/paritytech/polkadot-sdk/pull/3786, but those changes
are way more intrusive and will need more rigorous testing, additionally
they will reduce the time to less than 36h, but the propagation won't be
instant anyway, so not changing your network during restart should be
the safest way to run your node, unless you have a really good reason to
change it.

## Proposal
1. Do not auto-generate the network if the network file does not exist
in the provided path. Nodes where the key file does not exist will get
the following error:
```
Error: 
   0: Starting an authorithy without network key in /home/alexggh/.local/share/polkadot/chains/ksmcc3/network/secret_ed25519.
      
       This is not a safe operation because the old identity still lives in the dht for 36 hours.
      
       Because of it your node might suffer from not being properly connected to other nodes for validation purposes.
      
       If it is the first time running your node you could use one of the following methods.
      
       1. Pass --unsafe-force-node-key-generation and make sure you remove it for subsequent node restarts
      
       2. Separetly generate the key with: polkadot key generate-node-key --file <YOUR_PATH_TO_NODE_KEY>
```

2. Add an explicit parameters for nodes that do want to change their
network despite the warnings or if they run the node for the first time.
`--unsafe-force-node-key-generation`

3. For `polkadot key generate-node-key` add two new mutually exclusive
parameters `base_path` and `default_base_path` to help with the key
generation in the same path the polkadot main command would expect it.
 
4. Modify the installation scripts to auto-generate a key in default
path if one was not present already there, this should help with making
the executable work out of the box after an instalation.

## Notes

Nodes that do not have already the key persisted will fail to start
after this change, however I do consider that better than the current
situation where they start but they silently hide that they might not be
properly connected to their peers.

## TODO
- [x] Make sure only nodes that are authorities on producation chains
will be affected by this restrictions.
- [x] Proper PRDOC, to make sure node operators are aware this is
coming.

---------

Signed-off-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Dmitry Markin <[email protected]>
Co-authored-by: s0me0ne-unkn0wn <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

Changes:
- Add pallet-parameters to Rococo to configure the NIS and preimage
pallet.
- Fix names of expanded dynamic params. Apparently, `to_class_case`
removes suffix `s`, and `Nis` becomes `Ni` 😑

. Now using
`to_pascal_case`.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Alessandro Siniscalchi <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: command-bot <>

This PR introduces `BlockHashProvider` into `pallet_mmr::Config`
This type is used to get `block_hash` for a given `block_number` rather
than directly using `frame_system::Pallet::block_hash`

The `DefaultBlockHashProvider` uses `frame_system::Pallet::block_hash`
to get the `block_hash`

Closes: #4062

Completes the removal of `try-runtime-cli` logic from `polkadot-sdk`.

closes https://github.com/paritytech/polkadot-sdk/issues/3894

Allows Nomination Pool configuration to be set by a custom origin
instead of root.

In runtimes, we would set this to be `StakingAdmin`, same as for
pallet-staking.

---------

Co-authored-by: Liam Aharon <[email protected]>

[litep2p](https://github.com/altonen/litep2p) is a libp2p-compatible P2P
networking library. It supports all of the features of `rust-libp2p`
that are currently being utilized by Polkadot SDK.

Compared to `rust-libp2p`, `litep2p` has a quite different architecture
which is why the new `litep2p` network backend is only able to use a
little of the existing code in `sc-network`. The design has been mainly
influenced by how we'd wish to structure our networking-related code in
Polkadot SDK: independent higher-levels protocols directly communicating
with the network over links that support bidirectional backpressure. A
good example would be `NotificationHandle`/`RequestResponseHandle`
abstractions which allow, e.g., `SyncingEngine` to directly communicate
with peers to announce/request blocks.

I've tried running `polkadot --network-backend litep2p` with a few
different peer configurations and there is a noticeable reduction in
networking CPU usage. For high load (`...

This MR contains two major changes and some maintenance cleanup.  

## 1. Free Standing Pallet Benchmark Runner

Closes https://github.com/paritytech/polkadot-sdk/issues/3045, depends
on your runtime exposing the `GenesisBuilderApi` (like
https://github.com/paritytech/polkadot-sdk/pull/1492).

Introduces a new binary crate: `frame-omni-bencher`.  
It allows to directly benchmark a WASM blob - without needing a node or
chain spec.

This makes it much easier to generate pallet weights and should allow us
to remove bloaty code from the node.
It should work for all FRAME runtimes that dont use 3rd party host calls
or non `BlakeTwo256` block hashing (basically all polkadot parachains
should work).

It is 100% backwards compatible with the old CLI args, when the `v1`
compatibility command is used. This is done to allow for forwards
compatible addition of new commands.

### Example (full example in the Rust docs)

Installing the CLI:
```sh
cargo install --locked --path subs...

The runtime now can provide a number of predefined presets of
`RuntimeGenesisConfig` struct. This presets are intended to be used in
different deployments, e.g.: `local`, `staging`, etc, and should be
included into the corresponding chain-specs.

Having `GenesisConfig` presets in runtime allows to fully decouple node
from runtime types (the problem is described in #1984).

**Summary of changes:**
- The `GenesisBuilder` API was adjusted to enable this functionality
(and provide better naming - #150):
   ```rust
    fn preset_names() -> Vec<PresetId>;
fn get_preset(id: Option<PresetId>) -> Option<serde_json::Value>;
//`None` means default
    fn build_state(value: serde_json::Value);
    pub struct PresetId(Vec<u8>);
   ```

- **Breaking change**: Old `create_default_config` method was removed,
`build_config` was renamed to `build_state`. As a consequence a node
won't be able to interact with genesis config for older runtimes. The
cleanup was made for sake of API simplicity. Also IMO maintaining
compatibility with old API is not so crucial.
- Reference implementation was provided for `substrate-test-runtime` and
`rococo` runtimes. For rococo new
[`genesis_configs_presets`](https://github.com/paritytech/polkadot-sdk/blob/3b41d66b/polkadot/runtime/rococo/src/genesis_config_presets.rs#L530)
module was added and is used in `GenesisBuilder`
[_presets-related_](https://github.com/paritytech/polkadot-sdk/blob/3b41d66b/polkadot/runtime/rococo/src/lib.rs#L2462-L2485)
methods.

- The `chain-spec-builder` util was also improved and allows to
([_doc_](https://github.com/paritytech/polkadot-sdk/blob/3b41d66b/substrate/bin/utils/chain-spec-builder/src/lib.rs#L19)):
   - list presets provided by given runtime (`list-presets`),
- display preset or default config provided by the runtime
(`display-preset`),
   - build chain-spec using named preset (`create ... named-preset`),


- The `ChainSpecBuilder` is extended with
[`with_genesis_config_preset_name`](https://github.com/paritytech/polkadot-sdk/blob/3b41d66b/substrate/client/chain-spec/src/chain_spec.rs#L447)
method which allows to build chain-spec using named preset provided by
the runtime. Sample usage on the node side
[here](https://github.com/paritytech/polkadot-sdk/blob/2caffaae

/polkadot/node/service/src/chain_spec.rs#L404).

Implementation of #1984.
fixes: #150
part of: #25

---------

Co-authored-by: Sebastian Kunert <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

Part of https://github.com/paritytech/polkadot-sdk/issues/226 
Related https://github.com/paritytech/polkadot-sdk/issues/1833

- Deprecate `CurrencyAdapter` and introduce `FungibleAdapter`
- Deprecate `ToStakingPot` and replace usage with `ResolveTo`
- Required creating a new `StakingPotAccountId` struct that implements
`TypedGet` for the staking pot account ID
- Update parachain common utils `DealWithFees`, `ToAuthor` and
`AssetsToBlockAuthor` implementations to use `fungible`
- Update runtime XCM Weight Traders to use `ResolveTo` instead of
`ToStakingPot`
- Update runtime Transaction Payment pallets to use `FungibleAdapter`
instead of `CurrencyAdapter`
- [x] Blocked by https://github.com/paritytech/polkadot-sdk/pull/1296,
needs the `Unbalanced::decrease_balance` fix

## Basic example showcasing a migration using the MBM framework

This PR has been built on top of
https://github.com/paritytech/polkadot-sdk/pull/1781 and adds two new
example crates to the `examples` pallet

### Changes Made:

Added the `pallet-example-mbm` crate: This crate provides a minimal
example of a pallet that uses MBM. It showcases a storage migration
where values are migrated from a `u32` to a `u64`.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>

Working towards migrating the `parity-bridges-common` repo inside
`polkadot-sdk`. This PR upgrades some dependencies in order to align
them with the versions used in `parity-bridges-common`

Related to
https://github.com/paritytech/parity-bridges-common/issues/2538

This outputs:
```
2024-04-02 14:36:02.135 ERROR tokio-runtime-worker beefy: 🥩 for session starting at block 21990151
no BEEFY authority key found in store, you must generate valid session keys
(https://wiki.polkadot.network/docs/maintain-guides-how-to-validate-polkadot#generating-the-session-keys)
```
error log entry, once every session, for nodes running with
`Role::Authority` that have no public BEEFY key in their keystore

---------

Co-authored-by: Bastian Köcher <[email protected]>

This will make it possible to use remaining weight on idle for
processing enqueued messages.
More context here https://github.com/paritytech/polkadot-sdk/issues/3709

---------

Co-authored-by: Adrian Catangiu <[email protected]>

**Update:** Pushed additional changes based on the review comments.

**This pull request fixes various spelling mistakes in this
repository.**

Most of the changes are contained in the first **3** commits:

- `Fix spelling mistakes in comments and docs`

- `Fix spelling mistakes in test names`

- `Fix spelling mistakes in error messages, panic messages, logs and
tracing`

Other source code spelling mistakes are separated into individual
commits for easier reviewing:

- `Fix the spelling of 'authority'`

- `Fix the spelling of 'REASONABLE_HEADERS_IN_JUSTIFICATION_ANCESTRY'`

- `Fix the spelling of 'prev_enqueud_messages'`

- `Fix the spelling of 'endpoint'`

- `Fix the spelling of 'children'`

- `Fix the spelling of 'PenpalSiblingSovereignAccount'`

- `Fix the spelling of 'PenpalSudoAccount'`

- `Fix the spelling of 'insufficient'`

- `Fix the spelling of 'PalletXcmExtrinsicsBenchmark'`

- `Fix the spelling of 'subtracted'`

- `Fix the spelling of 'CandidatePendingAvailability'`

- `Fix the spelling of 'exclusive'`

- `Fix the spelling of 'until'`

- `Fix the spelling of 'discriminator'`

- `Fix the spelling of 'nonexistent'`

- `Fix the spelling of 'subsystem'`

- `Fix the spelling of 'indices'`

- `Fix the spelling of 'committed'`

- `Fix the spelling of 'topology'`

- `Fix the spelling of 'response'`

- `Fix the spelling of 'beneficiary'`

- `Fix the spelling of 'formatted'`

- `Fix the spelling of 'UNKNOWN_PROOF_REQUEST'`

- `Fix the spelling of 'succeeded'`

- `Fix the spelling of 'reopened'`

- `Fix the spelling of 'proposer'`

- `Fix the spelling of 'InstantiationNonce'`

- `Fix the spelling of 'depositor'`

- `Fix the spelling of 'expiration'`

- `Fix the spelling of 'phantom'`

- `Fix the spelling of 'AggregatedKeyValue'`

- `Fix the spelling of 'randomness'`

- `Fix the spelling of 'defendant'`

- `Fix the spelling of 'AquaticMammal'`

- `Fix the spelling of 'transactions'`

- `Fix the spelling of 'PassingTracingSubscriber'`

- `Fix the spelling of 'TxSignaturePayload'`

- `Fix the spelling of 'versioning'`

- `Fix the spelling of 'descendant'`

- `Fix the spelling of 'overridden'`

- `Fix the spelling of 'network'`

Let me know if this structure is adequate.

**Note:** The usage of the words `Merkle`, `Merkelize`, `Merklization`,
`Merkelization`, `Merkleization`, is somewhat inconsistent but I left it
as it is.

~~**Note:** In some places the term `Receival` is used to refer to
message reception, IMO `Reception` is the correct word here, but I left
it as it is.~~

~~**Note:** In some places the term `Overlayed` is used instead of the
more acceptable version `Overlaid` but I also left it as it is.~~

~~**Note:** In some places the term `Applyable` is used instead of the
correct version `Applicable` but I also left it as it is.~~

**Note:** Some usage of British vs American english e.g. `judgement` vs
`judgment`, `initialise` vs `initialize`, `optimise` vs `optimize` etc.
are both present in different places, but I suppose that's
understandable given the number of contributors.

~~**Note:** There is a spelling mistake in `.github/CODEOWNERS` but it
triggers errors in CI when I make changes to it, so I left it as it
is.~~

Make sure explicitly set by the operator public addresses go first in
the authority discovery DHT records.

Also update `Discovery` behavior to eliminate duplicates in the returned
addresses.

This PR should improve situation with
https://github.com/paritytech/polkadot-sdk/issues/3519.

Obsoletes https://github.com/paritytech/polkadot-sdk/pull/3657.

Part of #3326 

cc @Kianenigma @ggwpez @liamaharon

 

polkadot address: 12poSUQPtcF1HUPQGY3zZu2P8emuW9YnsPduA4XG3oCEfJVp

---------

Signed-off-by: Matteo Muraca <[email protected]>

Bumps the known_good_semver group with 3 updates:
[log](https://github.com/rust-lang/log),
[syn](https://github.com/dtolnay/syn) and
[clap](https://github.com/clap-rs/clap).

Updates `log` from 0.4.20 to 0.4.21
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/rust-lang/log/blob/master/CHANGELOG.md">log's
changelog</a>.</em></p>
<blockquote>
<h2>[0.4.21] - 2024-02-27</h2>
<h2>What's Changed</h2>
<ul>
<li>Minor clippy nits by <a
href="https://github.com/nyurik"><code>@​nyurik</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/578">rust-lang/log#578</a></li>
<li>Simplify Display impl by <a
href="https://github.com/nyurik"><code>@​nyurik</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/579">rust-lang/log#579</a></li>
<li>Set all crates to 2021 edition by <a
href="https://github.com/nyurik"><code>@​nyurik</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/580">rust-lang/log#580</a></li>
<li>Various changes based on review by <a
href="https://github.com/Thomasdezeeuw"><code>@​Thomasdezeeuw</code></a>
in <a
href="https://redirect.github.com/rust-lang/log/pull/583">rust-lang/log#583</a></li>
<li>Fix typo in file_static() method doc by <a
href="https://github.com/dimo414"><code>@​dimo414</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/590">rust-lang/log#590</a></li>
<li>Specialize empty key value pairs by <a
href="https://github.com/EFanZh"><code>@​EFanZh</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/576">rust-lang/log#576</a></li>
<li>Fix incorrect lifetime in Value::to_str() by <a
href="https://github.com/peterjoel"><code>@​peterjoel</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/587">rust-lang/log#587</a></li>
<li>Remove some API of the key-value feature by <a
href="https://github.com/Thomasdezeeuw"><code>@​Thomasdezeeuw</code></a>
in <a
href="https://redirect.github.com/rust-lang/log/pull/585">rust-lang/log#585</a></li>
<li>Add logcontrol-log and log-reload by <a
href="https://github.com/swsnr"><code>@​swsnr</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/595">rust-lang/log#595</a></li>
<li>Add Serialization section to kv::Value docs by <a
href="https://github.com/Thomasdezeeuw"><code>@​Thomasdezeeuw</code></a>
in <a
href="https://redirect.github.com/rust-lang/log/pull/593">rust-lang/log#593</a></li>
<li>Rename Value::to_str to to_cow_str by <a
href="https://github.com/Thomasdezeeuw"><code>@​Thomasdezeeuw</code></a>
in <a
href="https://redirect.github.com/rust-lang/log/pull/592">rust-lang/log#592</a></li>
<li>Clarify documentation and simplify initialization of
<code>STATIC_MAX_LEVEL</code> by <a
href="https://github.com/ptosi"><code>@​ptosi</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/594">rust-lang/log#594</a></li>
<li>Update docs to 2021 edition, test by <a
href="https://github.com/nyurik"><code>@​nyurik</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/577">rust-lang/log#577</a></li>
<li>Add &quot;alterable_logger&quot; link to README.md by <a
href="https://github.com/brummer-simon"><code>@​brummer-simon</code></a>
in <a
href="https://redirect.github.com/rust-lang/log/pull/589">rust-lang/log#589</a></li>
<li>Normalize line ending by <a
href="https://github.com/EFanZh"><code>@​EFanZh</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/602">rust-lang/log#602</a></li>
<li>Remove <code>ok_or</code> in favor of <code>Option::ok_or</code> by
<a
href="https://github.com/AngelicosPhosphoros"><code>@​AngelicosPhosphoros</code></a>
in <a
href="https://redirect.github.com/rust-lang/log/pull/607">rust-lang/log#607</a></li>
<li>Use <code>Acquire</code> ordering for initialization check by <a
href="https://github.com/AngelicosPhosphoros"><code>@​AngelicosPhosphoros</code></a>
in <a
href="https://redirect.github.com/rust-lang/log/pull/610">rust-lang/log#610</a></li>
<li>Get structured logging API ready for stabilization by <a
href="https://github.com/KodrAus"><code>@​KodrAus</code></a> in <a
href="https://redirect.github.com/rust-lang/log/pull/613">rust-lang/log#613</a></li>
</ul>
<h2>New Contributors</h2>
<ul>
<li><a href="https://github.com/nyurik"><code>@​nyurik</code></a> made
their first contribution in <a
href="https://redirect.github.com/rust-lang/log/pull/578">rust-lang/log#578</a></li>
<li><a href="https://github.com/dimo414"><code>@​dimo414</code></a> made
their first contribution in <a
href="https://redirect.github.com/rust-lang/log/pull/590">rust-lang/log#590</a></li>
<li><a href="https://github.com/peterjoel"><code>@​peterjoel</code></a>
made their first contribution in <a
href="https://redirect.github.com/rust-lang/log/pull/587">rust-lang/log#587</a></li>
<li><a href="https://github.com/ptosi"><code>@​ptosi</code></a> made
their first contribution in <a
href="https://redirect.github.com/rust-lang/log/pull/594">rust-lang/log#594</a></li>
<li><a
href="https://github.com/brummer-simon"><code>@​brummer-simon</code></a>
made their first contribution in <a
href="https://redirect.github.com/rust-lang/log/pull/589">rust-lang/log#589</a></li>
<li><a
href="https://github.com/AngelicosPhosphoros"><code>@​AngelicosPhosphoros</code></a>
made their first contribution in <a
href="https://redirect.github.com/rust-lang/log/pull/607">rust-lang/log#607</a></li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/rust-lang/log/commit/3ccdc286fef3076747fe18a2a93658ea4d4ae012"><code>3ccdc28</code></a>
Merge pull request <a
href="https://redirect.github.com/rust-lang/log/issues/617">#617</a>
from rust-lang/cargo/0.4.21</li>
<li><a
href="https://github.com/rust-lang/log/commit/6153cb289f0e7b80f00ae07dbe5ee41cf3d3fcb0"><code>6153cb2</code></a>
prepare for 0.4.21 release</li>
<li><a
href="https://github.com/rust-lang/log/commit/f0f74946a4bfb02cfc407795a3499c4b69d7a290"><code>f0f7494</code></a>
Merge pull request <a
href="https://redirect.github.com/rust-lang/log/issues/613">#613</a>
from rust-lang/feat/kv-cleanup</li>
<li><a
href="https://github.com/rust-lang/log/commit/2b220bf3b705f2abc0ee591c7eb17972a979da3a"><code>2b220bf</code></a>
clean up structured logging example</li>
<li><a
href="https://github.com/rust-lang/log/commit/646e9ab9917fb79e44b6b36b8375106a1a09766c"><code>646e9ab</code></a>
use original Visitor name for VisitValue</li>
<li><a
href="https://github.com/rust-lang/log/commit/cf85c38d3519745d60e7b891c4b2025050a8389f"><code>cf85c38</code></a>
add needed subfeatures to kv_unstable</li>
<li><a
href="https://github.com/rust-lang/log/commit/73e953905b970ef765a86bf6cbd69bc2c5e2bac4"><code>73e9539</code></a>
fix up capturing of :err</li>
<li><a
href="https://github.com/rust-lang/log/commit/31bb4b0ff36e458c6bef304a336b71f6342ddcc7"><code>31bb4b0</code></a>
move error macros together</li>
<li><a
href="https://github.com/rust-lang/log/commit/ad917118a5e781d0dd60b3a75ba519ce9839ba70"><code>ad91711</code></a>
support field shorthand in macros</li>
<li><a
href="https://github.com/rust-lang/log/commit/90a347bd836873264a393a35bfd90fe478fadae2"><code>90a347b</code></a>
restore removed APIs as deprecated</li>
<li>Additional commits viewable in <a
href="https://github.com/rust-lang/log/compare/0.4.20...0.4.21">compare
view</a></li>
</ul>
</details>
<br />

Updates `syn` from 2.0.50 to 2.0.52
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/syn/releases">syn's
releases</a>.</em></p>
<blockquote>
<h2>2.0.52</h2>
<ul>
<li>Add an expression parser that uses match-arm's boundary rules (<a
href="https://redirect.github.com/dtolnay/syn/issues/1593">#1593</a>)</li>
</ul>
<h2>2.0.51</h2>
<ul>
<li>Resolve non_local_definitions warnings in generated code under rustc
1.78-nightly</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/syn/commit/07ede6a6b31adeb3a18899ada1f352f63b3a36b9"><code>07ede6a</code></a>
Release 2.0.52</li>
<li><a
href="https://github.com/dtolnay/syn/commit/acbcfbc8c113fa1603469c9ad329d061ee74662e"><code>acbcfbc</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1593">#1593</a>
from dtolnay/boundary</li>
<li><a
href="https://github.com/dtolnay/syn/commit/4924a993dce23abe65128ac318dd662d1e2ceef2"><code>4924a99</code></a>
Add an expression parser that uses match-arm's boundary rules</li>
<li><a
href="https://github.com/dtolnay/syn/commit/e06122bf2cfd31bd7f70304694477dd292fe7e1e"><code>e06122b</code></a>
Resolve unnecessary_get_then_check clippy lint</li>
<li><a
href="https://github.com/dtolnay/syn/commit/018fc5a6298491525387910cb359a9ec618abe54"><code>018fc5a</code></a>
Update test suite to nightly-2024-02-27</li>
<li><a
href="https://github.com/dtolnay/syn/commit/5e15a9b412cb1e2df481e3470e1be8defaee4495"><code>5e15a9b</code></a>
Release 2.0.51</li>
<li><a
href="https://github.com/dtolnay/syn/commit/7e0d4e1f43a879078595f0a3876484a1920ab8f8"><code>7e0d4e1</code></a>
Resolve non_local_definitions warning in debug impls</li>
<li><a
href="https://github.com/dtolnay/syn/commit/8667ad97c1d4e75ac1bb323fb5c7849269814145"><code>8667ad9</code></a>
Ignore module_name_repetitions pedantic clippy lint in codegen</li>
<li><a
href="https://github.com/dtolnay/syn/commit/1fc32000e25bf8fda7371071073f91e012ddf808"><code>1fc3200</code></a>
Update test suite to nightly-2024-02-26</li>
<li><a
href="https://github.com/dtolnay/syn/commit/07a2065576b27dcf0c104f56379cc446d2f3824b"><code>07a2065</code></a>
Update test suite to nightly-2024-02-23</li>
<li>See full diff in <a
href="https://github.com/dtolnay/syn/compare/2.0.50...2.0.52">compare
view</a></li>
</ul>
</details>
<br />

Updates `clap` from 4.5.1 to 4.5.3
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/releases">clap's
releases</a>.</em></p>
<blockquote>
<h2>v4.5.3</h2>
<h2>[4.5.3] - 2024-03-15</h2>
<h3>Internal</h3>
<ul>
<li><em>(derive)</em> Update <code>heck</code></li>
</ul>
<h2>v4.5.2</h2>
<h2>[4.5.2] - 2024-03-06</h2>
<h3>Fixes</h3>
<ul>
<li><em>(macros)</em> Silence a warning</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.5.3] - 2024-03-15</h2>
<h3>Internal</h3>
<ul>
<li><em>(derive)</em> Update <code>heck</code></li>
</ul>
<h2>[4.5.2] - 2024-03-06</h2>
<h3>Fixes</h3>
<ul>
<li><em>(macros)</em> Silence a warning</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/4e07b438584bb8a19e37599d4c5b11797bec5579"><code>4e07b43</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/8247c7ddf05d8023729ac180d8e8df260f1da5ff"><code>8247c7d</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/677c52ce0870115845a4c42e204f6c049b81a1e7"><code>677c52c</code></a>
chore: Update <code>heck</code> requirement (<a
href="https://redirect.github.com/clap-rs/clap/issues/5396">#5396</a>)</li>
<li><a
href="https://github.com/clap-rs/clap/commit/f65d421607ba16c3175ffe76a20820f123b6c4cb"><code>f65d421</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/886b2729e419114bf42f1a92c66d346c81aa8f33"><code>886b272</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/3ba429752fdb19b7a1c2e151c41d5141ad5b9295"><code>3ba4297</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5386">#5386</a>
from amaanq/static-var-name</li>
<li><a
href="https://github.com/clap-rs/clap/commit/2aea9504c4894b3bddf9cd4d2d6cba889307c157"><code>2aea950</code></a>
fix: Use SCREAMING_SNAKE_CASE for static variable
<code>authors</code></li>
<li><a
href="https://github.com/clap-rs/clap/commit/690f5557d7f25904c31ec9f2a3c3657cbb68c98e"><code>690f555</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5382">#5382</a>
from clap-rs/renovate/pre-commit-action-3.x</li>
<li><a
href="https://github.com/clap-rs/clap/commit/a2aa644368ec19026b16b870ec32dc57b325ba9b"><code>a2aa644</code></a>
chore(deps): update compatible (dev) (<a
href="https://redirect.github.com/clap-rs/clap/issues/5381">#5381</a>)</li>
<li><a
href="https://github.com/clap-rs/clap/commit/c233de53c0cca4281f444cf16d16d161bc9c3cab"><code>c233de5</code></a>
chore(deps): update pre-commit/action action to v3.0.1</li>
<li>Additional commits viewable in <a
href="https://github.com/clap-rs/clap/compare/clap_complete-v4.5.1...v4.5.3">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Step in https://github.com/paritytech/polkadot-sdk/issues/171

This PR removes `as [disambiguation_path]` syntax from `derive_impl`
usage across the polkadot-sdk as introduced in
https://github.com/paritytech/polkadot-sdk/pull/3505

Revert "FRAME: Create `TransactionExtension` as a replacement for `SignedExtension` (#2280)" (#3665)

This PR reverts #2280 which introduced `TransactionExtension` to replace
`SignedExtension`.

As a result of the discussion
[here](https://github.com/paritytech/polkadot-sdk/pull/3623#issuecomment-1986789700),
the changes will be reverted for now with plans to reintroduce the
concept in the future.

---------

Signed-off-by: georgepisaltu <[email protected]>

Moved from https://github.com/paritytech/substrate/pull/14788

----

Fixes https://github.com/paritytech/polkadot-sdk/issues/232

This PR introduces outer-macro approach for `construct_runtime` as
discussed in the linked issue. It looks like the following:
```rust
#[frame_support::runtime]
mod runtime {
	#[runtime::runtime]
        #[runtime::derive(
		RuntimeCall,
		RuntimeEvent,
		RuntimeError,
		RuntimeOrigin,
		RuntimeFreezeReason,
		RuntimeHoldReason,
		RuntimeSlashReason,
		RuntimeLockId,
                RuntimeTask,
	)]
	pub struct Runtime;

	#[runtime::pallet_index(0)]
	pub type System = frame_system;

	#[runtime::pallet_index(1)]
	pub type Timestamp = pallet_timestamp;

	#[runtime::pallet_index(2)]
	pub type Aura = pallet_aura;

	#[runtime::pallet_index(3)]
	pub type Grandpa = pallet_grandpa;

	#[runtime::pallet_index(4)]
	pub type Balances = pallet_balances;

	#[runtime::pallet_index(5)]
	pub type TransactionPayment = pallet_transaction_payment;

	#[runtime::pallet_index(6)]
	pub type Sudo = pallet_sudo;

	// Include the custom logic from the pallet-template in the runtime.
	#[runtime::pallet_index(7)]
	pub type TemplateModule = pallet_template;
}
```

## Features
- `#[runtime::runtime]` attached to a struct defines the main runtime
- `#[runtime::derive]` attached to this struct defines the types
generated by runtime
- `#[runtime::pallet_index]` must be attached to a pallet to define its
index
- `#[runtime::disable_call]` can be optionally attached to a pallet to
disable its calls
- `#[runtime::disable_unsigned]` can be optionally attached to a pallet
to disable unsigned calls
- A pallet instance can be defined as `TemplateModule:
pallet_template<Instance>`
- An optional attribute can be defined as
`#[frame_support::runtime(legacy_ordering)]` to ensure that the order of
hooks is same as the order of pallets (and not based on the
pallet_index). This is to support legacy runtimes and should be avoided
for new ones.

## Todo
- [x] Update the latest syntax in kitchensink and tests
- [x] Update UI tests
- [x] Docs

## Extension
- Abstract away the Executive similar to
https://github.com/paritytech/substrate/pull/14742
- Optionally avoid the need to specify all runtime types (TBD)

---------

Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Nikhil Gupta <>

Signed-off-by: cuinix <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

Closes: #3196

---------

Co-authored-by: Alexander Theißen <[email protected]>
Co-authored-by: PG Herveou <[email protected]>

The first step towards
https://github.com/paritytech/polkadot-sdk/issues/3155

Brings all templates under the following structure

```
templates
|   parachain
|   |   polkadot-launch
|   |   runtime              --> parachain-template-runtime
|   |   pallets              --> pallet-parachain-template
|   |   node                 --> parachain-template-node
|   minimal
|   |   runtime              --> minimal-template-runtime
|   |   pallets              --> pallet-minimal-template
|   |   node                 --> minimal-template-node
|   solochain
|   |   runtime              --> solochain-template-runtime
|   |   pallets              --> pallet-template (the naming is not consistent here)
|   |   node                 --> solochain-template-node
```

The only note-worthy changes in this PR are: 

- More `Cargo.toml` fields are forwarded to use the one from the
workspace.
- parachain template now has weights and benchmarks
- adds a shell pallet to the minimal template
- remove a few unused deps 


A list of possible follow-ups: 

- [ ] Unify READMEs, create a parent README for all
- [ ] remove references to `docs.substrate.io` in templates
- [ ] make all templates use `#[derive_impl]`
- [ ] update and unify all licenses
- [ ] Remove polkadot launch, use
https://github.com/paritytech/polkadot-sdk/blob/35349df9/cumulus/zombienet/examples/small_network.toml
instead.

Part of #3326 
This one is easier as all the storage items are public. 

@ggwpez @Kianenigma @shawntabrizi



---------

Signed-off-by: Matteo Muraca <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Kian Paimani <[email protected]>

Closes #2160

First part of [Extrinsic
Horizon](https://github.com/paritytech/polkadot-sdk/issues/2415)

Introduces a new trait `TransactionExtension` to replace
`SignedExtension`. Introduce the idea of transactions which obey the
runtime's extensions and have according Extension data (né Extra data)
yet do not have hard-coded signatures.

Deprecate the terminology of "Unsigned" when used for
transactions/extrinsics owing to there now being "proper" unsigned
transactions which obey the extension framework and "old-style" unsigned
which do not. Instead we have __*General*__ for the former and
__*Bare*__ for the latter. (Ultimately, the latter will be phased out as
a type of transaction, and Bare will only be used for Inherents.)

Types of extrinsic are now therefore:
- Bare (no hardcoded signature, no Extra data; used to be known as
"Unsigned")
- Bare transactions (deprecated): Gossiped, validated with
`ValidateUnsigned` (deprecated) and the `_bare_compat` bits of
`TransactionExtension` (deprecated).
  - Inherents: Not gossiped, validated with `ProvideInherent`.
- Extended (Extra data): Gossiped, validated via `TransactionExtension`.
  - Signed transactions (with a hardcoded signature).
  - General transactions (without a hardcoded signature).

`TransactionExtension` differs from `SignedExtension` because:
- A signature on the underlying transaction may validly not be present.
- It may alter the origin during validation.
- `pre_dispatch` is renamed to `prepare` and need not contain the checks
present in `validate`.
- `validate` and `prepare` is passed an `Origin` rather than a
`AccountId`.
- `validate` may pass arbitrary information into `prepare` via a new
user-specifiable type `Val`.
- `AdditionalSigned`/`additional_signed` is renamed to
`Implicit`/`implicit`. It is encoded *for the entire transaction* and
passed in to each extension as a new argument to `validate`. This
facilitates the ability of extensions to acts as underlying crypto.

There is a new `DispatchTransaction` trait which contains only default
function impls and is impl'ed for any `TransactionExtension` impler. It
provides several utility functions which reduce some of the tedium from
using `TransactionExtension` (indeed, none of its regular functions
should now need to be called directly).

Three transaction version discriminator ("versions") are now
permissible:
- 0b000000100: Bare (used to be called "Unsigned"): contains Signature
or Extra (extension data). After bare transactions are no longer
supported, this will strictly identify an Inherents only.
- 0b100000100: Old-school "Signed" Transaction: contains Signature and
Extra (extension data).
- 0b010000100: New-school "General" Transaction: contains Extra
(extension data), but no Signature.

For the New-school General Transaction, it becomes trivial for authors
to publish extensions to the mechanism for authorizing an Origin, e.g.
through new kinds of key-signing schemes, ZK proofs, pallet state,
mutations over pre-authenticated origins or any combination of the
above.

## Code Migration

### NOW: Getting it to build

Wrap your `SignedExtension`s in `AsTransactionExtension`. This should be
accompanied by renaming your aggregate type in line with the new
terminology. E.g. Before:

```rust
/// The SignedExtension to the basic transaction logic.
pub type SignedExtra = (
	/* snip */
	MySpecialSignedExtension,
);
/// Unchecked extrinsic type as expected by this runtime.
pub type UncheckedExtrinsic =
	generic::UncheckedExtrinsic<Address, RuntimeCall, Signature, SignedExtra>;
```

After:

```rust
/// The extension to the basic transaction logic.
pub type TxExtension = (
	/* snip */
	AsTransactionExtension<MySpecialSignedExtension>,
);
/// Unchecked extrinsic type as expected by this runtime.
pub type UncheckedExtrinsic =
	generic::UncheckedExtrinsic<Address, RuntimeCall, Signature, TxExtension>;
```

You'll also need to alter any transaction building logic to add a
`.into()` to make the conversion happen. E.g. Before:

```rust
fn construct_extrinsic(
		/* snip */
) -> UncheckedExtrinsic {
	let extra: SignedExtra = (
		/* snip */
		MySpecialSignedExtension::new(/* snip */),
	);
	let payload = SignedPayload::new(call.clone(), extra.clone()).unwrap();
	let signature = payload.using_encoded(|e| sender.sign(e));
	UncheckedExtrinsic::new_signed(
		/* snip */
		Signature::Sr25519(signature),
		extra,
	)
}
```

After:

```rust
fn construct_extrinsic(
		/* snip */
) -> UncheckedExtrinsic {
	let tx_ext: TxExtension = (
		/* snip */
		MySpecialSignedExtension::new(/* snip */).into(),
	);
	let payload = SignedPayload::new(call.clone(), tx_ext.clone()).unwrap();
	let signature = payload.using_encoded(|e| sender.sign(e));
	UncheckedExtrinsic::new_signed(
		/* snip */
		Signature::Sr25519(signature),
		tx_ext,
	)
}
```

### SOON: Migrating to `TransactionExtension`

Most `SignedExtension`s can be trivially converted to become a
`TransactionExtension`. There are a few things to know.

- Instead of a single trait like `SignedExtension`, you should now
implement two traits individually: `TransactionExtensionBase` and
`TransactionExtension`.
- Weights are now a thing and must be provided via the new function `fn
weight`.

#### `TransactionExtensionBase`

This trait takes care of anything which is not dependent on types
specific to your runtime, most notably `Call`.

- `AdditionalSigned`/`additional_signed` is renamed to
`Implicit`/`implicit`.
- Weight must be returned by implementing the `weight` function. If your
extension is associated with a pallet, you'll probably want to do this
via the pallet's existing benchmarking infrastructure.

#### `TransactionExtension`

Generally:
- `pre_dispatch` is now `prepare` and you *should not reexecute the
`validate` functionality in there*!
- You don't get an account ID any more; you get an origin instead. If
you need to presume an account ID, then you can use the trait function
`AsSystemOriginSigner::as_system_origin_signer`.
- You get an additional ticket, similar to `Pre`, called `Val`. This
defines data which is passed from `validate` into `prepare`. This is
important since you should not be duplicating logic from `validate` to
`prepare`, you need a way of passing your working from the former into
the latter. This is it.
- This trait takes two type parameters: `Call` and `Context`. `Call` is
the runtime call type which used to be an associated type; you can just
move it to become a type parameter for your trait impl. `Context` is not
currently used and you can safely implement over it as an unbounded
type.
- There's no `AccountId` associated type any more. Just remove it.

Regarding `validate`:
- You get three new parameters in `validate`; all can be ignored when
migrating from `SignedExtension`.
- `validate` returns a tuple on success; the second item in the tuple is
the new ticket type `Self::Val` which gets passed in to `prepare`. If
you use any information extracted during `validate` (off-chain and
on-chain, non-mutating) in `prepare` (on-chain, mutating) then you can
pass it through with this. For the tuple's last item, just return the
`origin` argument.

Regarding `prepare`:
- This is renamed from `pre_dispatch`, but there is one change:
- FUNCTIONALITY TO VALIDATE THE TRANSACTION NEED NOT BE DUPLICATED FROM
`validate`!!
- (This is different to `SignedExtension` which was required to run the
same checks in `pre_dispatch` as in `validate`.)

Regarding `post_dispatch`:
- Since there are no unsigned transactions handled by
`TransactionExtension`, `Pre` is always defined, so the first parameter
is `Self::Pre` rather than `Option<Self::Pre>`.

If you make use of `SignedExtension::validate_unsigned` or
`SignedExtension::pre_dispatch_unsigned`, then:
- Just use the regular versions of these functions instead.
- Have your logic execute in the case that the `origin` is `None`.
- Ensure your transaction creation logic creates a General Transaction
rather than a Bare Transaction; this means having to include all
`TransactionExtension`s' data.
- `ValidateUnsigned` can still be used (for now) if you need to be able
to construct transactions which contain none of the extension data,
however these will be phased out in stage 2 of the Transactions Horizon,
so you should consider moving to an extension-centric design.

## TODO

- [x] Introduce `CheckSignature` impl of `TransactionExtension` to
ensure it's possible to have crypto be done wholly in a
`TransactionExtension`.
- [x] Deprecate `SignedExtension` and move all uses in codebase to
`TransactionExtension`.
  - [x] `ChargeTransactionPayment`
  - [x] `DummyExtension`
  - [x] `ChargeAssetTxPayment` (asset-tx-payment)
  - [x] `ChargeAssetTxPayment` (asset-conversion-tx-payment)
  - [x] `CheckWeight`
  - [x] `CheckTxVersion`
  - [x] `CheckSpecVersion`
  - [x] `CheckNonce`
  - [x] `CheckNonZeroSender`
  - [x] `CheckMortality`
  - [x] `CheckGenesis`
  - [x] `CheckOnlySudoAccount`
  - [x] `WatchDummy`
  - [x] `PrevalidateAttests`
  - [x] `GenericSignedExtension`
  - [x] `SignedExtension` (chain-polkadot-bulletin)
  - [x] `RefundSignedExtensionAdapter`
- [x] Implement `fn weight` across the board.
- [ ] Go through all pre-existing extensions which assume an account
signer and explicitly handle the possibility of another kind of origin.
- [x] `CheckNonce` should probably succeed in the case of a non-account
origin.
- [x] `CheckNonZeroSender` should succeed in the case of a non-account
origin.
- [x] `ChargeTransactionPayment` and family should fail in the case of a
non-account origin.
  - [ ] 
- [x] Fix any broken tests.

---------

Signed-off-by: georgepisaltu <[email protected]>
Signed-off-by: Alexandru Vasile <[email protected]>
Signed-off-by: dependabot[bot] <[email protected]>
Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Signed-off-by: Alexandru Gheorghe <[email protected]>
Signed-off-by: Andrei Sandu <[email protected]>
Co-authored-by: Nikhil Gupta <[email protected]>
Co-authored-by: georgepisaltu <[email protected]>
Co-authored-by: Chevdor <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Maciej <[email protected]>
Co-authored-by: Javier Viola <[email protected]>
Co-authored-by: Marcin S. <[email protected]>
Co-authored-by: Tsvetomir Dimitrov <[email protected]>
Co-authored-by: Javier Bullrich <[email protected]>
Co-authored-by: Koute <[email protected]>
Co-authored-by: Adrian Catangiu <[email protected]>
Co-authored-by: Vladimir Istyufeev <[email protected]>
Co-authored-by: Ross Bulat <[email protected]>
Co-authored-by: Gonçalo Pestana <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Svyatoslav Nikolsky <[email protected]>
Co-authored-by: André Silva <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: s0me0ne-unkn0wn <[email protected]>
Co-authored-by: ordian <[email protected]>
Co-authored-by: Sebastian Kunert <[email protected]>
Co-authored-by: Aaro Altonen <[email protected]>
Co-authored-by: Dmitry Markin <[email protected]>
Co-authored-by: Alexandru Vasile <[email protected]>
Co-authored-by: Alexander Samusev <[email protected]>
Co-authored-by: Julian Eager <[email protected]>
Co-authored-by: Michal Kucharczyk <[email protected]>
Co-authored-by: Davide Galassi <[email protected]>
Co-authored-by: Dónal Murray <[email protected]>
Co-authored-by: yjh <[email protected]>
Co-authored-by: Tom Mi <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Will | Paradox | ParaNodes.io <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Joshy Orndorff <[email protected]>
Co-authored-by: Joshy Orndorff <[email protected]>
Co-authored-by: PG Herveou <[email protected]>
Co-authored-by: Alexander Theißen <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: Juan Girini <[email protected]>
Co-authored-by: bader y <[email protected]>
Co-authored-by: James Wilson <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: asynchronous rob <[email protected]>
Co-authored-by: Parth <[email protected]>
Co-authored-by: Andrew Jones <[email protected]>
Co-authored-by: Jonathan Udd <[email protected]>
Co-authored-by: Serban Iorga <[email protected]>
Co-authored-by: Egor_P <[email protected]>
Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: Evgeny Snitko <[email protected]>
Co-authored-by: Just van Stam <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: gupnik <[email protected]>
Co-authored-by: dzmitry-lahoda <[email protected]>
Co-authored-by: zhiqiangxu <[email protected]>
Co-authored-by: Nazar Mokrynskyi <[email protected]>
Co-authored-by: Anwesh <[email protected]>
Co-authored-by: cheme <[email protected]>
Co-authored-by: Sam Johnson <[email protected]>
Co-authored-by: kianenigma <[email protected]>
Co-authored-by: Jegor Sidorenko <[email protected]>
Co-authored-by: Muharem <[email protected]>
Co-authored-by: joepetrowski <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Gabriel Facco de Arruda <[email protected]>
Co-authored-by: Squirrel <[email protected]>
Co-authored-by: Andrei Sandu <[email protected]>
Co-authored-by: georgepisaltu <[email protected]>
Co-authored-by: command-bot <>

Fixing: 
```
Verification failed for block 0x07bbf1e04121d70a4bdb21cc055132b53ac2390fa95c4d05497fc91b1e8bf7f5 received from (12D3KooWJzLd8skcAgA24EcJey7aJAhYctfUxWGjSP5Usk9wbpPZ): "Header 0x07bbf1e04121d70a4bdb21cc055132b53ac2390fa95c4d05497fc91b1e8bf7f5 rejected: too far in the future"   
```

---------

Signed-off-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Dmitry Sinyavin <[email protected]>
Co-authored-by: s0me0ne-unkn0wn <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

This MR is the merge of
https://github.com/paritytech/substrate/pull/14414 and
https://github.com/paritytech/substrate/pull/14275. It implements
[RFC#13](https://github.com/polkadot-fellows/RFCs/pull/13), closes
https://github.com/paritytech/polkadot-sdk/issues/198.

----- 

This Merge request introduces three major topicals:

1. Multi-Block-Migrations
1. New pallet `poll` hook for periodic service work
1. Replacement hooks for `on_initialize` and `on_finalize` in cases
where `poll` cannot be used

and some more general changes to FRAME.  
The changes for each topical span over multiple crates. They are listed
in topical order below.

# 1.) Multi-Block-Migrations

Multi-Block-Migrations are facilitated by creating `pallet_migrations`
and configuring `System::Config::MultiBlockMigrator` to point to it.
Executive picks this up and triggers one step of the migrations pallet
per block.
The chain is in lockdown mode for as long as an MBM is ongoing.
Executive does this by polling `MultiBlockMigrator::ongoing` and not
allowing any transaction in a block, if true.

A MBM is defined through trait `SteppedMigration`. A condensed version
looks like this:
```rust
/// A migration that can proceed in multiple steps.
pub trait SteppedMigration {
	type Cursor: FullCodec + MaxEncodedLen;
	type Identifier: FullCodec + MaxEncodedLen;

	fn id() -> Self::Identifier;

	fn max_steps() -> Option<u32>;

	fn step(
		cursor: Option<Self::Cursor>,
		meter: &mut WeightMeter,
	) -> Result<Option<Self::Cursor>, SteppedMigrationError>;
}
```

`pallet_migrations` can be configured with an aggregated tuple of these
migrations. It then starts to migrate them one-by-one on the next
runtime upgrade.
Two things are important here:
- 1. Doing another runtime upgrade while MBMs are ongoing is not a good
idea and can lead to messed up state.
- 2. **Pallet Migrations MUST BE CONFIGURED IN `System::Config`,
otherwise it is not used.**

The pallet supports an `UpgradeStatusHandler` that can be used to notify
external logic of upgrade start/finish (for example to pause XCM
dispatch).

Error recovery is very limited in the case that a migration errors or
times out (exceeds its `max_steps`). Currently the runtime dev can
decide in `FailedMigrationHandler::failed` how to handle this. One
follow-up would be to pair this with the `SafeMode` pallet and enact
safe mode when an upgrade fails, to allow governance to rescue the
chain. This is currently not possible, since governance is not
`Mandatory`.

## Runtime API

- `Core`: `initialize_block` now returns `ExtrinsicInclusionMode` to
inform the Block Author whether they can push transactions.

### Integration

Add it to your runtime implementation of `Core` and `BlockBuilder`:
```patch
diff --git a/runtime/src/lib.rs b/runtime/src/lib.rs
@@ impl_runtime_apis! {
	impl sp_block_builder::Core<Block> for Runtime {
-		fn initialize_block(header: &<Block as BlockT>::Header) {
+		fn initialize_block(header: &<Block as BlockT>::Header) -> RuntimeExecutiveMode {
			Executive::initialize_block(header)
		}

		...
	}
```

# 2.) `poll` hook

A new pallet hook is introduced: `poll`. `Poll` is intended to replace
mostly all usage of `on_initialize`.
The reason for this is that any code that can be called from
`on_initialize` cannot be migrated through an MBM. Currently there is no
way to statically check this; the implication is to use `on_initialize`
as rarely as possible.
Failing to do so can result in broken storage invariants.

The implementation of the poll hook depends on the `Runtime API` changes
that are explained above.

# 3.) Hard-Deadline callbacks

Three new callbacks are introduced and configured on `System::Config`:
`PreInherents`, `PostInherents` and `PostTransactions`.
These hooks are meant as replacement for `on_initialize` and
`on_finalize` in cases where the code that runs cannot be moved to
`poll`.
The reason for this is to make the usage of HD-code (hard deadline) more
explicit - again to prevent broken invariants by MBMs.

# 4.) FRAME (general changes)

## `frame_system` pallet

A new memorize storage item `InherentsApplied` is added. It is used by
executive to track whether inherents have already been applied.
Executive and can then execute the MBMs directly between inherents and
transactions.

The `Config` gets five new items:
- `SingleBlockMigrations` this is the new way of configuring migrations
that run in a single block. Previously they were defined as last generic
argument of `Executive`. This shift is brings all central configuration
about migrations closer into view of the developer (migrations that are
configured in `Executive` will still work for now but is deprecated).
- `MultiBlockMigrator` this can be configured to an engine that drives
MBMs. One example would be the `pallet_migrations`. Note that this is
only the engine; the exact MBMs are injected into the engine.
- `PreInherents` a callback that executes after `on_initialize` but
before inherents.
- `PostInherents` a callback that executes after all inherents ran
(including MBMs and `poll`).
- `PostTransactions` in symmetry to `PreInherents`, this one is called
before `on_finalize` but after all transactions.

A sane default is to set all of these to `()`. Example diff suitable for
any chain:
```patch
@@ impl frame_system::Config for Test {
 	type MaxConsumers = ConstU32<16>;
+	type SingleBlockMigrations = ();
+	type MultiBlockMigrator = ();
+	type PreInherents = ();
+	type PostInherents = ();
+	type PostTransactions = ();
 }
```

An overview of how the block execution now looks like is here. The same
graph is also in the rust doc.

<details><summary>Block Execution Flow</summary>
<p>

![Screenshot 2023-12-04 at 19 11
29](https://github.com/paritytech/polkadot-sdk/assets/10380170/e88a80c4-ef11-4faa-8df5-8b33a724c054)

</p>
</details> 

## Inherent Order

Moved to https://github.com/paritytech/polkadot-sdk/pull/2154

---------------


## TODO

- [ ] Check that `try-runtime` still works
- [ ] Ensure backwards compatibility with old Runtime APIs
- [x] Consume weight correctly
- [x] Cleanup

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Juan Girini <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Gavin Wood <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

Add a `ApiVersion` constant to the pallet-contracts Config to
communicate with developers the current state of the host functions
exposed by the pallet

Closes https://github.com/paritytech/polkadot-sdk/issues/2713

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: André Silva <[email protected]>

part of #3326 

@ggwpez @Kianenigma @shawntabrizi



---------

Signed-off-by: Matteo Muraca <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>

The rationale behind this, is that it may be useful for some users
actually disable RPC batch requests or limit them by length instead of
the total size bytes of the batch.

This PR adds two new CLI options:

```
--rpc-disable-batch-requests - disable batch requests on the server
--rpc-max-batch-request-len <LEN> - limit batches to LEN on the server.
```

Lifting some more dependencies to the workspace. Just using the
most-often updated ones for now.
It can be reproduced locally.

```sh
# First you can check if there would be semver incompatible bumps (looks good in this case):
$ zepter transpose dependency lift-to-workspace --ignore-errors syn quote thiserror "regex:^serde.*"

# Then apply the changes:
$ zepter transpose dependency lift-to-workspace --version-resolver=highest syn quote thiserror "regex:^serde.*" --fix

# And format the changes:
$ taplo format --config .config/taplo.toml
```

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

Bumps the known_good_semver group with 1 update:
[clap](https://github.com/clap-rs/clap).

Updates `clap` from 4.5.0 to 4.5.1
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/releases">clap's
releases</a>.</em></p>
<blockquote>
<h2>v4.5.1</h2>
<h2>[4.5.1] - 2024-02-16</h2>
<h3>Fixes</h3>
<ul>
<li><em>(error)</em> Include suggestion to add <code>--</code> even if
there is a &quot;did you mean&quot; so long as <code>last</code> or
<code>trailing_var_arg</code> is used</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.5.1] - 2024-02-16</h2>
<h3>Fixes</h3>
<ul>
<li><em>(error)</em> Include suggestion to add <code>--</code> even if
there is a &quot;did you mean&quot; so long as <code>last</code> or
<code>trailing_var_arg</code> is used</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/0c01b5558de0a1a513a2af429981099e550d1a78"><code>0c01b55</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/08e0b5bde4b45567be98d12e7d394762fa8da6a4"><code>08e0b5b</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/f2c4e6ec740cce29cea3fd7232e4d2716f089fc2"><code>f2c4e6e</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5359">#5359</a>
from poliorcetics/ab/push-szymvyzpmnqx</li>
<li><a
href="https://github.com/clap-rs/clap/commit/e782775229081697e47d340a155d6b087eeb46f8"><code>e782775</code></a>
fix(complete): Handle newlines in command/arg descriptions</li>
<li><a
href="https://github.com/clap-rs/clap/commit/fba7c8597bf3028400d6f6a22d83cedb7a2bd5a5"><code>fba7c85</code></a>
test(complete): Show newline issue</li>
<li><a
href="https://github.com/clap-rs/clap/commit/8a7a13a5618cfdc4ff328624a5266e7b4d88649a"><code>8a7a13a</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/7b3a3e1e5eee57fc37110343b980cbe8170d20ad"><code>7b3a3e1</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/7b624ca74336f6f14f01007b9039990d53acda0f"><code>7b624ca</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5356">#5356</a>
from epage/escape</li>
<li><a
href="https://github.com/clap-rs/clap/commit/446328a8d3cdaac28884bf8fdfcc85f35c8b5134"><code>446328a</code></a>
fix(error): Include -- in more cases</li>
<li><a
href="https://github.com/clap-rs/clap/commit/7de6df878238ca8e3d9723bb9650f7fe9470d8bd"><code>7de6df8</code></a>
test(error): Show existing last behavior</li>
<li>Additional commits viewable in <a
href="https://github.com/clap-rs/clap/compare/clap_complete-v4.5.0...clap_complete-v4.5.1">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=clap&package-manager=cargo&previous-version=4.5.0&new-version=4.5.1)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Add RPC server rate limiting which can be utilized by the CLI
`--rpc-rate-limit <calls/per minute>`

Resolves first part of
https://github.com/paritytech/polkadot-sdk/issues/3028

//cc @PierreBesson @kogeler

  you might be interested in this one

---------

Co-authored-by: James Wilson <[email protected]>
Co-authored-by: Xiliang Chen <[email protected]>

This brings functionality to Westend's Coretime Chain runtime, where
previously it was not much more than a shell.

It is assumed that the Coretime pallet will have the same index in the
Westend runtime as it does in Rococo for the runtime calls.

TODO:
- [x] Generate chainspec
- [x] Regenerate weights
- [x] Check hardcoded RuntimeCall weights against relay weights for
transacts

Aura key generation: https://github.com/paritytech/devops/issues/2725

---------

Co-authored-by: command-bot <>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Anton Vilhelm Ásgeirsson <[email protected]>

fix typo

Bumps the known_good_semver group with 6 updates:

| Package | From | To |
| --- | --- | --- |
| [serde](https://github.com/serde-rs/serde) | `1.0.195` | `1.0.196` |
| [serde_json](https://github.com/serde-rs/json) | `1.0.111` | `1.0.113`
|
| [clap](https://github.com/clap-rs/clap) | `4.4.18` | `4.5.0` |
| [syn](https://github.com/dtolnay/syn) | `2.0.48` | `2.0.49` |
| [serde_yaml](https://github.com/dtolnay/serde-yaml) | `0.9.30` |
`0.9.31` |
| [serde_derive](https://github.com/serde-rs/serde) | `1.0.195` |
`1.0.196` |

Updates `serde` from 1.0.195 to 1.0.196
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/serde/releases">serde's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.196</h2>
<ul>
<li>Improve formatting of &quot;invalid type&quot; error messages
involving floats (<a
href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/serde/commit/ede9762a583c3cc3b87c10a53551828fad339525"><code>ede9762</code></a>
Release 1.0.196</li>
<li><a
href="https://github.com/serde-rs/serde/commit/d438c2d67bf30e3edab31c2272c4829c12cf4cb5"><code>d438c2d</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>
from dtolnay/decimalpoint</li>
<li><a
href="https://github.com/serde-rs/serde/commit/bef110b92a171ac568a47339f5bd97938a8c9da2"><code>bef110b</code></a>
Format Unexpected::Float with decimal point</li>
<li><a
href="https://github.com/serde-rs/serde/commit/b971ef11d1b53da7673e0c8199e87509c003c1a8"><code>b971ef1</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2681">#2681</a>
from dtolnay/workspacedeps</li>
<li><a
href="https://github.com/serde-rs/serde/commit/29d9f693996d199748136d5561a971ed68626724"><code>29d9f69</code></a>
Fix workspace.dependencies default-features future compat warning</li>
<li><a
href="https://github.com/serde-rs/serde/commit/aecb4083bde754155752f5d7d442b64eb7dc636f"><code>aecb408</code></a>
Sort workspace dependencies</li>
<li><a
href="https://github.com/serde-rs/serde/commit/1c675ab3a38e46df4e62465800970f8b20a2055d"><code>1c675ab</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2678">#2678</a>
from rodoufu/workspaceDependencies</li>
<li><a
href="https://github.com/serde-rs/serde/commit/dd619630a337139424725697ccd9a9f7596a2d3a"><code>dd61963</code></a>
Adding workspace dependencies</li>
<li><a
href="https://github.com/serde-rs/serde/commit/111803ab0768d010c606f2fc0d0add12750d5eef"><code>111803a</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2673">#2673</a>
from Sky9x/msrv-badge</li>
<li><a
href="https://github.com/serde-rs/serde/commit/0024f74f34fbbdc44a7b22457faebe36c5cbe7f8"><code>0024f74</code></a>
Use shields.io's MSRV badges</li>
<li>See full diff in <a
href="https://github.com/serde-rs/serde/compare/v1.0.195...v1.0.196">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_json` from 1.0.111 to 1.0.113
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/json/releases">serde_json's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.113</h2>
<ul>
<li>Add <code>swap_remove</code> and <code>shift_remove</code> methods
on Map (<a
href="https://redirect.github.com/serde-rs/json/issues/1109">#1109</a>)</li>
</ul>
<h2>v1.0.112</h2>
<ul>
<li>Improve formatting of &quot;invalid type&quot; error messages
involving floats (<a
href="https://redirect.github.com/serde-rs/json/issues/1107">#1107</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/json/commit/09d865b34b9701be52764dc9bf571b1a16e9d3dc"><code>09d865b</code></a>
Release 1.0.113</li>
<li><a
href="https://github.com/serde-rs/json/commit/5aeab4eaf69d7959f013f8081865c264d6c00551"><code>5aeab4e</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1109">#1109</a>
from serde-rs/remove</li>
<li><a
href="https://github.com/serde-rs/json/commit/ca3c2ca3696cab79b8b279be7569ee1647250f1e"><code>ca3c2ca</code></a>
Add swap_remove and shift_remove methods on Map</li>
<li><a
href="https://github.com/serde-rs/json/commit/7fece969e3b480ec620419d65c2aeb08776bebcb"><code>7fece96</code></a>
Release 1.0.112</li>
<li><a
href="https://github.com/serde-rs/json/commit/6a6d2bbd9e8b8bd72573b863f12a4ec991f33232"><code>6a6d2bb</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1107">#1107</a>
from serde-rs/unexpectedfloat</li>
<li><a
href="https://github.com/serde-rs/json/commit/83d7bad54ba5db3a44198d6df0ff2e81621683fa"><code>83d7bad</code></a>
Format f64 in error messages using ryu</li>
<li><a
href="https://github.com/serde-rs/json/commit/107c2d1c42817f0d71f07a4d5b0ea2f29dbce8b8"><code>107c2d1</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1106">#1106</a>
from serde-rs/invalidvalue</li>
<li><a
href="https://github.com/serde-rs/json/commit/62ca3e4c01c2e62cd5c2a32e9104f386e5ce7808"><code>62ca3e4</code></a>
Handle Unexpected::Unit in Error::invalid_value</li>
<li><a
href="https://github.com/serde-rs/json/commit/296fafb8f32e8442ef8e4d5725c15ffca726b288"><code>296fafb</code></a>
Factor out JSON-specific Display impl for serde::de::Unexpected</li>
<li><a
href="https://github.com/serde-rs/json/commit/e56cc696bd7c112e5dd4ccfa23d094c3a1c1c1ff"><code>e56cc69</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1105">#1105</a>
from keienWang/master</li>
<li>Additional commits viewable in <a
href="https://github.com/serde-rs/json/compare/v1.0.111...v1.0.113">compare
view</a></li>
</ul>
</details>
<br />

Updates `clap` from 4.4.18 to 4.5.0
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.5.0] - 2024-02-08</h2>
<h3>Compatibility</h3>
<ul>
<li>Update MSRV to 1.74</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/a751c5fe65cd33cb09e85ff3039b4fd0182cdb6e"><code>a751c5f</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/9ec6c942b81c370a8c14652e42295933244555ac"><code>9ec6c94</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/0735119775c2d27fef6b3c232cb9ef2fcbbd963f"><code>0735119</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/c4d3959506f5068f86ffb7ab34b622bd2da40dd8"><code>c4d3959</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5344">#5344</a>
from epage/encode</li>
<li><a
href="https://github.com/clap-rs/clap/commit/f750e577789e1dd34c6950d8c8fe16d1bfd1f49c"><code>f750e57</code></a>
fix(lex): Use new-ish OsStr API</li>
<li><a
href="https://github.com/clap-rs/clap/commit/1d9a554cdfddffcb92d197706b9720e2760cb443"><code>1d9a554</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5343">#5343</a>
from epage/msrv</li>
<li><a
href="https://github.com/clap-rs/clap/commit/4b45d361b1b96eb1f37b7d1db2684203ca828a94"><code>4b45d36</code></a>
chore: Update MSRV to 1.74</li>
<li><a
href="https://github.com/clap-rs/clap/commit/55b1f945157d4d0e480dea6c492e04d0b541088a"><code>55b1f94</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5342">#5342</a>
from epage/divan</li>
<li><a
href="https://github.com/clap-rs/clap/commit/ea77b98da3f321069ae136a241a2d266c2b28bd7"><code>ea77b98</code></a>
test(complete): Make it order independent</li>
<li><a
href="https://github.com/clap-rs/clap/commit/b0fea2bac60819bdb042e10c032817fded67f815"><code>b0fea2b</code></a>
test(bench): Switch to divan</li>
<li>Additional commits viewable in <a
href="https://github.com/clap-rs/clap/compare/v4.4.18...clap_complete-v4.5.0">compare
view</a></li>
</ul>
</details>
<br />

Updates `syn` from 2.0.48 to 2.0.49
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/syn/releases">syn's
releases</a>.</em></p>
<blockquote>
<h2>2.0.49</h2>
<ul>
<li>Improve error location when parsing from an empty string literal
using <code>LitStr::parse</code> (<a
href="https://redirect.github.com/dtolnay/syn/issues/1590">#1590</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/syn/commit/e64c0636042bcd8cf56f9e6c3e828a49cb434649"><code>e64c063</code></a>
Release 2.0.49</li>
<li><a
href="https://github.com/dtolnay/syn/commit/981359c5f46f25f3db42d1b341cc607f634688e7"><code>981359c</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1590">#1590</a>
from dtolnay/streof</li>
<li><a
href="https://github.com/dtolnay/syn/commit/51298d40a447b9e5b3cd8c898c2ea9d24b31cd6d"><code>51298d4</code></a>
Improve error location at eof in LitStr::parse</li>
<li><a
href="https://github.com/dtolnay/syn/commit/270c63384a9d891f65880a03a5a92f0bf4605bbf"><code>270c633</code></a>
Update test suite to nightly-2024-02-13</li>
<li><a
href="https://github.com/dtolnay/syn/commit/dc9cf16b9b0601d2d393d059c46a8f8e0220cc21"><code>dc9cf16</code></a>
Remove FilterAttrs trait when unused</li>
<li><a
href="https://github.com/dtolnay/syn/commit/7dcfac79eda716fa806d68cc0aa811f3be717dc0"><code>7dcfac7</code></a>
Ignore dead_code warning in test</li>
<li><a
href="https://github.com/dtolnay/syn/commit/98318441089f9a9bb596fc010ed14c3b593d4bda"><code>9831844</code></a>
Update signature of Emitter::emit_diagnostic in nightly-2024-02-07</li>
<li><a
href="https://github.com/dtolnay/syn/commit/9e8033f63da93dfb6a3e698449c6edff5e56727d"><code>9e8033f</code></a>
Update test suite to nightly-2024-02-07</li>
<li><a
href="https://github.com/dtolnay/syn/commit/cb3348cd94be50995054796facdfa055b6e0e9e8"><code>cb3348c</code></a>
Update test suite to nightly-2024-01-23</li>
<li><a
href="https://github.com/dtolnay/syn/commit/15b9dbcd67bc56f3da7d33bbede46f7380fc7164"><code>15b9dbc</code></a>
Update test suite to nightly-2024-01-19</li>
<li>Additional commits viewable in <a
href="https://github.com/dtolnay/syn/compare/2.0.48...2.0.49">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_yaml` from 0.9.30 to 0.9.31
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/serde-yaml/releases">serde_yaml's
releases</a>.</em></p>
<blockquote>
<h2>0.9.31</h2>
<ul>
<li>Add <code>swap_remove</code> and <code>shift_remove</code> methods
on Mapping (<a
href="https://redirect.github.com/dtolnay/serde-yaml/issues/408">#408</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/2a77483b23897115bdd69af32ae34d593268d555"><code>2a77483</code></a>
Release 0.9.31</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/d8d1a839cf42ef4627c66bebd743f5fecd24e3ed"><code>d8d1a83</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/serde-yaml/issues/408">#408</a>
from dtolnay/remove</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/f8a99a496836ccfa6c547af9136986d13011be98"><code>f8a99a4</code></a>
Add swap_remove and shift_remove methods on Mapping</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/8b26413e3307e39329dc68a96b065058aec38f9a"><code>8b26413</code></a>
Work around dead_code warning in tests</li>
<li>See full diff in <a
href="https://github.com/dtolnay/serde-yaml/compare/0.9.30...0.9.31">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_derive` from 1.0.195 to 1.0.196
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/serde/releases">serde_derive's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.196</h2>
<ul>
<li>Improve formatting of &quot;invalid type&quot; error messages
involving floats (<a
href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/serde/commit/ede9762a583c3cc3b87c10a53551828fad339525"><code>ede9762</code></a>
Release 1.0.196</li>
<li><a
href="https://github.com/serde-rs/serde/commit/d438c2d67bf30e3edab31c2272c4829c12cf4cb5"><code>d438c2d</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>
from dtolnay/decimalpoint</li>
<li><a
href="https://github.com/serde-rs/serde/commit/bef110b92a171ac568a47339f5bd97938a8c9da2"><code>bef110b</code></a>
Format Unexpected::Float with decimal point</li>
<li><a
href="https://github.com/serde-rs/serde/commit/b971ef11d1b53da7673e0c8199e87509c003c1a8"><code>b971ef1</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2681">#2681</a>
from dtolnay/workspacedeps</li>
<li><a
href="https://github.com/serde-rs/serde/commit/29d9f693996d199748136d5561a971ed68626724"><code>29d9f69</code></a>
Fix workspace.dependencies default-features future compat warning</li>
<li><a
href="https://github.com/serde-rs/serde/commit/aecb4083bde754155752f5d7d442b64eb7dc636f"><code>aecb408</code></a>
Sort workspace dependencies</li>
<li><a
href="https://github.com/serde-rs/serde/commit/1c675ab3a38e46df4e62465800970f8b20a2055d"><code>1c675ab</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2678">#2678</a>
from rodoufu/workspaceDependencies</li>
<li><a
href="https://github.com/serde-rs/serde/commit/dd619630a337139424725697ccd9a9f7596a2d3a"><code>dd61963</code></a>
Adding workspace dependencies</li>
<li><a
href="https://github.com/serde-rs/serde/commit/111803ab0768d010c606f2fc0d0add12750d5eef"><code>111803a</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2673">#2673</a>
from Sky9x/msrv-badge</li>
<li><a
href="https://github.com/serde-rs/serde/commit/0024f74f34fbbdc44a7b22457faebe36c5cbe7f8"><code>0024f74</code></a>
Use shields.io's MSRV badges</li>
<li>See full diff in <a
href="https://github.com/serde-rs/serde/compare/v1.0.195...v1.0.196">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Close #2992 

Breaking changes:
- rpc server grafana metric `substrate_rpc_requests_started` is removed
(not possible to implement anymore)
- rpc server grafana metric `substrate_rpc_requests_finished` is removed
(not possible to implement anymore)
- rpc server ws ping/pong not ACK:ed within 30 seconds more than three
times then the connection will be closed

Added
- rpc server grafana metric `substrate_rpc_sessions_time` is added to
get the duration for each websocket session