Skip to content
  1. Jan 31, 2024
    • Adrian Catangiu's avatar
      xcm-executor: DepositReserveAsset charges delivery fees from inner assets (#3142) · 5354097a
      Adrian Catangiu authored 
      

This fix aims to solve an issue in Kusama that resulted in failed
reserve asset transfers.

During multi-hop XCMs, like reserve asset transfers where the reserve is
not the sender nor the destination, but a third remote chain, the origin
is not available to pay for delivery fees out of their account directly,
so delivery fees should be paid out of transferred assets.

This commit also adds an xcm-emulator regression test that validates
this scenario is now working.

Signed-off-by: default avatarAdrian Catangiu <[email protected]>
Co-authored-by: default avatarFrancisco Aguirre <[email protected]>
      5354097a
    • Branislav Kontur's avatar
      [frame] `#[pallet::composite_enum]` improved variant count handling + removed... · bb8ddc46
      Branislav Kontur authored 
      [frame] `#[pallet::composite_enum]` improved variant count handling + removed `pallet_balances`'s `MaxHolds` config (#2657)

I started this investigation/issue based on @liamaharon question
[here](https://github.com/paritytech/polkadot-sdk/pull/1801#discussion_r1410452499).

## Problem

The `pallet_balances` integrity test should correctly detect that the
runtime has correct distinct `HoldReasons` variant count. I assume the
same situation exists for RuntimeFreezeReason.

It is not a critical problem, if we set `MaxHolds` with a sufficiently
large value, everything should be ok. However, in this case, the
integrity_test check becomes less useful.

**Situation for "any" runtime:**
- `HoldReason` enums from different pallets:
```rust
        /// from pallet_nis
        #[pallet::composite_enum]
	pub enum HoldReason {
		NftReceipt,
	}

        /// from pallet_preimage
        #[pallet::composite_enum]
	pub enum HoldReason {
		Preimage,
	}

        // from pallet_state-trie-migration
        #[pallet::composite_enum]
	pub enum HoldReason {
		SlashForContinueMigrate,
		SlashForMigrateCustomTop,
		SlashForMigrateCustomChild,
	}
```

- generated `RuntimeHoldReason` enum looks like:
```rust
pub enum RuntimeHoldReason {

    #[codec(index = 32u8)]
    Preimage(pallet_preimage::HoldReason),

    #[codec(index = 38u8)]
    Nis(pallet_nis::HoldReason),

    #[codec(index = 42u8)]
    StateTrieMigration(pallet_state_trie_migration::HoldReason),
}
```

- composite enum `RuntimeHoldReason` variant count is detected as `3`
- we set `type MaxHolds = ConstU32<3>`
- `pallet_balances::integrity_test` is ok with `3`(at least 3)

However, the real problem can occur in a live runtime where some
functionality might stop working. This is due to a total of 5 distinct
hold reasons (for pallets with multi-instance support, it is even more),
and not all of them can be used because of an incorrect `MaxHolds`,
which is deemed acceptable according to the `integrity_test`:
  ```
  // pseudo-code - if we try to call all of these:

T::Currency::hold(&pallet_nis::HoldReason::NftReceipt.into(),
&nft_owner, deposit)?;
T::Currency::hold(&pallet_preimage::HoldReason::Preimage.into(),
&nft_owner, deposit)?;

T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForContinueMigrate.into(),
&nft_owner, deposit)?;

  // With `type MaxHolds = ConstU32<3>` these two will fail

T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomTop.into(),
&nft_owner, deposit)?;

T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomChild.into(),
&nft_owner, deposit)?;
  ```  


## Solutions

A macro `#[pallet::*]` expansion is extended of `VariantCount`
implementation for the `#[pallet::composite_enum]` enum type. This
expansion generates the `VariantCount` implementation for pallets'
`HoldReason`, `FreezeReason`, `LockId`, and `SlashReason`. Enum variants
must be plain enum values without fields to ensure a deterministic
count.

The composite runtime enum, `RuntimeHoldReason` and
`RuntimeFreezeReason`, now sets `VariantCount::VARIANT_COUNT` as the sum
of pallets' enum `VariantCount::VARIANT_COUNT`:
```rust
#[frame_support::pallet(dev_mode)]
mod module_single_instance {

	#[pallet::composite_enum]
	pub enum HoldReason {
		ModuleSingleInstanceReason1,
		ModuleSingleInstanceReason2,
	}
...
}

#[frame_support::pallet(dev_mode)]
mod module_multi_instance {

	#[pallet::composite_enum]
	pub enum HoldReason<I: 'static = ()> {
		ModuleMultiInstanceReason1,
		ModuleMultiInstanceReason2,
		ModuleMultiInstanceReason3,
	}
...
}


impl self::sp_api_hidden_includes_construct_runtime::hidden_include::traits::VariantCount
    for RuntimeHoldReason
{
    const VARIANT_COUNT: u32 = 0
        + module_single_instance::HoldReason::VARIANT_COUNT
        + module_multi_instance::HoldReason::<module_multi_instance::Instance1>::VARIANT_COUNT
        + module_multi_instance::HoldReason::<module_multi_instance::Instance2>::VARIANT_COUNT
        + module_multi_instance::HoldReason::<module_multi_instance::Instance3>::VARIANT_COUNT;
}
```

In addition, `MaxHolds` is removed (as suggested
[here](https://github.com/paritytech/polkadot-sdk/pull/2657#discussion_r1443324573))
from `pallet_balances`, and its `Holds` are now bounded to
`RuntimeHoldReason::VARIANT_COUNT`. Therefore, there is no need to let
the runtime specify `MaxHolds`.


## For reviewers

Relevant changes can be found here:
- `substrate/frame/support/procedural/src/lib.rs` 
-  `substrate/frame/support/procedural/src/pallet/parse/composite.rs`
-  `substrate/frame/support/procedural/src/pallet/expand/composite.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/composite_helper.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/hold_reason.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/freeze_reason.rs`
- `substrate/frame/support/src/traits/misc.rs`

And the rest of the files is just about removed `MaxHolds` from
`pallet_balances`

## Next steps

Do the same for `MaxFreezes`
https://github.com/paritytech/polkadot-sdk/issues/2997

.

---------

Co-authored-by: command-bot <>
Co-authored-by: default avatarBastian Köcher <[email protected]>
Co-authored-by: default avatarDónal Murray <[email protected]>
Co-authored-by: default avatargupnik <[email protected]>
      bb8ddc46
    • Francisco Aguirre's avatar
      Add limits to XCMv4 (#3114) · cc4805b5
      Francisco Aguirre authored 
      

Some more work regarding XCMv4. Two limits from v3 were not transferred
over, those are:
- The instructions limit
- The number of assets limit
Both of these are now in v4.

For some reason `AssetInstance` increased in size, don't know why CI
didn't catch that before.

---------

Co-authored-by: default avatarBastian Köcher <[email protected]>
Co-authored-by: command-bot <>
      cc4805b5
  3. Jan 28, 2024
  5. Jan 26, 2024
  7. Jan 24, 2024
  9. Jan 23, 2024
    • Niklas Adolfsson's avatar
      rpc: backpressured RPC server (bump jsonrpsee 0.20) (#1313) · e16ef086
      Niklas Adolfsson authored 
      This is a rather big change in jsonrpsee, the major things in this bump
are:
- Server backpressure (the subscription impls are modified to deal with
that)
- Allow custom error types / return types (remove jsonrpsee::core::Error
and jsonrpee::core::CallError)
- Bug fixes (graceful shutdown in particular not used by substrate
anyway)
   - Less dependencies for the clients in particular
   - Return type requires Clone in method call responses
   - Moved to tokio channels
   - Async subscription API (not used in this PR)

Major changes in this PR:
- The subscriptions are now bounded and if subscription can't keep up
with the server it is dropped
- CLI: add parameter to configure the jsonrpc server bounded message
buffer (default is 64)
- Add our own subscription helper to deal with the unbounded streams in
substrate

The most important things in this PR to review is the added helpers
functions in `substrate/client/rpc/src/utils.rs` and the rest is pretty
much chore.

Regarding the "bounded buffer limit" it may cause the server to handle
the JSON-RPC calls
slower than before.

The message size limit is bounded by "--rpc-response-size" thus "by
default 10MB * 64 = 640MB"
but the subscription message size is not covered by this limit and could
be capped as well.

Hopefully the last release prior to 1.0, sorry in advance for a big PR

Previous attempt: https://github.com/paritytech/substrate/pull/13992

Resolves https://github.com/paritytech/polkadot-sdk/issues/748, resolves
https://github.com/paritytech/polkadot-sdk/issues/627
      e16ef086
    • Francisco Aguirre's avatar
      Add unit impl for XcmAssetTransfers trait (#3022) · 1417a026
      Francisco Aguirre authored 
      If an Executor is required in some pallet's config, a mock might be
provided where `Executor = ()`. `()` already implements `ExecuteXcm`,
but not `XcmAssetTransfers`, which is also related. This PR just fixes
that so you can skip having to create a whole xcm configuration, which
is non-trivial right now.
      1417a026
  11. Jan 22, 2024
  13. Jan 18, 2024
  15. Jan 16, 2024
    • Francisco Aguirre's avatar
      XCMv4 (#1230) · 8428f678
      Francisco Aguirre authored 
      

# Note for reviewer

Most changes are just syntax changes necessary for the new version.
Most important files should be the ones under the `xcm` folder.

# Description 

Added XCMv4.

## Removed `Multi` prefix
The following types have been renamed:
- MultiLocation -> Location
- MultiAsset -> Asset
- MultiAssets -> Assets
- InteriorMultiLocation -> InteriorLocation
- MultiAssetFilter -> AssetFilter
- VersionedMultiAsset -> VersionedAsset
- WildMultiAsset -> WildAsset
- VersionedMultiLocation -> VersionedLocation

In order to fix a name conflict, the `Assets` in `xcm-executor` were
renamed to `HoldingAssets`, as they represent assets in holding.

## Removed `Abstract` asset id

It was not being used anywhere and this simplifies the code.

Now assets are just constructed as follows:

```rust
let asset: Asset = (AssetId(Location::new(1, Here)), 100u128).into();
```

No need for specifying `Concrete` anymore.

## Outcome is now a named fields struct

Instead of

```rust
pub enum Outcome {
  Complete(Weight),
  Incomplete(Weight, Error),
  Error(Error),
}
```

we now have

```rust
pub enum Outcome {
  Complete { used: Weight },
  Incomplete { used: Weight, error: Error },
  Error { error: Error },
}
```

## Added Reanchorable trait

Now both locations and assets implement this trait, making it easier to
reanchor both.

## New syntax for building locations and junctions

Now junctions are built using the following methods:

```rust
let location = Location {
    parents: 1,
    interior: [Parachain(1000), PalletInstance(50), GeneralIndex(1984)].into()
};
```

or

```rust
let location = Location::new(1, [Parachain(1000), PalletInstance(50), GeneralIndex(1984)]);
```

And they are matched like so:

```rust
match location.unpack() {
  (1, [Parachain(id)]) => ...
  (0, Here) => ...,
  (1, [_]) => ...,
}
```

This syntax is mandatory in v4, and has been also implemented for v2 and
v3 for easier migration.

This was needed to make all sizes smaller.

# TODO
- [x] Scaffold v4
- [x] Port github.com/paritytech/polkadot/pull/7236
- [x] Remove `Multi` prefix
- [x] Remove `Abstract` asset id

---------

Co-authored-by: command-bot <>
Co-authored-by: default avatarKeith Yeung <[email protected]>
      8428f678
  17. Jan 10, 2024
  19. Jan 07, 2024
  21. Jan 04, 2024
  23. Dec 28, 2023
  25. Dec 26, 2023
  27. Dec 20, 2023
    • Dónal Murray's avatar
      Fix clippy lints behind feature gates and add new CI step all features (#2569) · d68868f6
      Dónal Murray authored 
      

Many clippy lints usually enforced by `-Dcomplexity` and `-Dcorrectness`
are not caught by CI as they are gated by `features`, like
`runtime-benchmarks`, while the clippy CI job runs with only the default
features for all targets.

This PR also adds a CI step to run clippy with `--all-features` to
ensure the code quality is maintained behind feature gates from now on.

To improve local development, clippy lints are downgraded to warnings,
but they still will result in an error at CI due to the `-Dwarnings`
rustflag.

---------

Co-authored-by: default avatarLiam Aharon <[email protected]>
      d68868f6
  29. Dec 18, 2023
  31. Dec 14, 2023
  33. Dec 13, 2023
  35. Dec 12, 2023
    • Branislav Kontur's avatar
      Ensure xcm versions over bridge (on sending chains) (#2481) · 575b8f8d
      Branislav Kontur authored 
      ## Summary

This pull request proposes a solution for improved control of the
versioned XCM flow over the bridge (across different consensus chains)
and resolves the situation where the sending chain/consensus has already
migrated to a higher XCM version than the receiving chain/consensus.

## Problem/Motivation

The current flow over the bridge involves a transfer from AssetHubRococo
(AHR) to BridgeHubRococo (BHR) to BridgeHubWestend (BHW) and finally to
AssetHubWestend (AHW), beginning with a reserve-backed transfer on AHR.

In this process:
1. AHR sends XCM `ExportMessage` through `XcmpQueue`, incorporating XCM
version checks using the `WrapVersion` feature, influenced by
`pallet_xcm::SupportedVersion` (managed by
`pallet_xcm::force_xcm_version` or version discovery).

2. BHR handles the `ExportMessage` instruction, utilizing the latest XCM
version. The `HaulBlobExporter` converts the inner XCM to
[`VersionedXcm::from`](https://github.com/paritytech/polkadot-sdk/blob/63ac2471aa0210f0ac9903bdd7d8f9351f9a635f/polkadot/xcm/xcm-builder/src/universal_exports.rs#L465-L467),
also using the latest XCM version.

However, challenges arise:
- Incompatibility when BHW uses a different version than BHR. For
instance, if BHR migrates to **XCMv4** while BHW remains on **XCMv3**,
BHR's `VersionedXcm::from` uses `VersionedXcm::V4` variant, causing
encoding issues for BHW.
  ```
	/// Just a simulation of possible error, which could happen on BHW
	/// (this code is based on actual master without XCMv4)
	let encoded = hex_literal::hex!("0400");
	println!("{:?}", VersionedXcm::<()>::decode(&mut &encoded[..]));

Err(Error { cause: None, desc: "Could not decode `VersionedXcm`, variant
doesn't exist" })
  ``` 
- Similar compatibility issues exist between AHR and AHW.

## Solution

This pull request introduces the following solutions:

1. **New trait `CheckVersion`** - added to the `xcm` module and exposing
`pallet_xcm::SupportedVersion`. This enhancement allows checking the
actual XCM version for desired destinations outside of the `pallet_xcm`
module.

2. **Version Check in `HaulBlobExporter`** uses `CheckVersion` to check
known/configured destination versions, ensuring compatibility. For
example, in the scenario mentioned, BHR can store the version `3` for
BHW. If BHR is on XCMv4, it will attempt to downgrade the message to
version `3` instead of using the latest version `4`.

3. **Version Check in `pallet-xcm-bridge-hub-router`** - this check
ensures compatibility with the real destination's XCM version,
preventing the unnecessary sending of messages to the local bridge hub
if versions are incompatible.

These additions aim to improve the control and compatibility of XCM
flows over the bridge and addressing issues related to version
mismatches.

## Possible alternative solution

_(More investigation is needed, and at the very least, it should extend
to XCMv4/5. If this proves to be a viable option, I can open an RFC for
XCM.)._

Add the `XcmVersion` attribute to the `ExportMessage` so that the
sending chain can determine, based on what is stored in
`pallet_xcm::SupportedVersion`, the version the destination is using.
This way, we may not need to handle the version in `HaulBlobExporter`.

```
ExportMessage {
	network: NetworkId,
	destination: InteriorMultiLocation,
	xcm: Xcm<()>
	destination_xcm_version: Version, // <- new attritbute
},
```

```
pub trait ExportXcm {
        fn validate(
		network: NetworkId,
		channel: u32,
		universal_source: &mut Option<InteriorMultiLocation>,
		destination: &mut Option<InteriorMultiLocation>,
		message: &mut Option<Xcm<()>>,
                destination_xcm_version: Version, , // <- new attritbute
	) -> SendResult<Self::Ticket>;
```

## Future Directions

This PR does not fix version discovery over bridge, further
investigation will be conducted here:
https://github.com/paritytech/polkadot-sdk/issues/2417.

## TODO

- [x] `pallet_xcm` mock for tests uses hard-coded XCM version `2` -
change to 3 or lastest?
- [x] fix `pallet-xcm-bridge-hub-router`
- [x] fix HaulBlobExporter with version determination
[here](https://github.com/paritytech/polkadot-sdk/blob/2183669d05f9b510f979a0cc3c7847707bacba2e/polkadot/xcm/xcm-builder/src/universal_exports.rs#L465)
- [x] add unit-tests to the runtimes
- [x] run benchmarks for `ExportMessage`
- [x] extend local run scripts about `force_xcm_version(dest, version)`
- [ ] when merged, prepare governance calls for Rococo/Westend
- [ ] add PRDoc

Part of: https://github.com/paritytech/parity-bridges-common/issues/2719

---------

Co-authored-by: command-bot <>
      575b8f8d
  37. Dec 11, 2023
  39. Dec 07, 2023
    • dzmitry-lahoda's avatar
      feat(xcm): support json schema (for CosmWasm VM support) (#1454) · 95c3ee10
      dzmitry-lahoda authored 
      # Description

- What does this PR do? Allows to generate JSON schema for subset of XCM
in std builds
- Why are these changes needed? To support XCM messages in CosmWasm
contracts which require Schemars to generate contract clients
- How were these changes implemented and what do they affect? We will
use schema feature flag to build XCM pallet with JSON schema enabled

# Checklist

- [x] My PR includes a detailed description as outlined in the
"Description" section above
- [x] My PR follows the [labeling requirements](CONTRIBUTING.md#Process)
of this project (at minimum one label for `T`
  required)
- [x] I have made corresponding changes to the documentation (if
applicable)
- [x] I have added tests that prove my fix is effective or that my
feature works (if applicable)
- [x] If this PR alters any external APIs or interfaces used by
Polkadot, the corresponding Polkadot PR is ready as well
  as the corresponding Cumulus PR (optional)
      95c3ee10
  41. Dec 06, 2023
    • Adrian Catangiu's avatar
      pallet-xcm: add new flexible `transfer_assets()` call/extrinsic (#2388) · e7651cf4
      Adrian Catangiu authored 
      # Motivation (+testing)

### Enable easy `ForeignAssets` transfers using `pallet-xcm` 

We had just previously added capabilities to teleport fees during
reserve-based transfers, but what about reserve-transferring fees when
needing to teleport some non-fee asset?

This PR aligns everything under either explicit reserve-transfer,
explicit teleport, or this new flexible `transfer_assets()` which can
mix and match as needed with fewer artificial constraints imposed to the
user.

This will enable, for example, a (non-system) parachain to teleport
their `ForeignAssets` assets to AssetHub while using DOT to pay fees.
(the assets are teleported - as foreign assets should from their owner
chain - while DOT used for fees can only be reserve-based transferred
between said parachain and AssetHub).

Added `xcm-emulator` tests for this scenario ^.

# Description

Reverts `(limited_)reserve_transfer_assets` to only allow reserve-based
transfers for all `assets` including fees.

Similarly `(limited_)teleport_assets` only allows teleports for all
`assets` including fees.
    
For complex combinations of asset transfers where assets and fees may
have different reserves or different reserve/teleport trust
configurations, users can use the newly added `transfer_assets()`
extrinsic which is more flexible in allowing more complex scenarios.

`assets` (excluding `fees`) must have same reserve location or otherwise
be teleportable to `dest`.
No limitations imposed on `fees`.

- for local reserve: transfer assets to sovereign account of destination
chain and forward a notification XCM to `dest` to mint and deposit
reserve-based assets to `beneficiary`.
- for destination reserve: burn local assets and forward a notification
to `dest` chain to withdraw the reserve assets from this chain's
sovereign account and deposit them to `beneficiary`.
- for remote reserve: burn local assets, forward XCM to reserve chain to
move reserves from this chain's SA to `dest` chain's SA, and forward
another XCM to `dest` to mint and deposit reserve-based assets to
`beneficiary`.
- for teleports: burn local assets and forward XCM to `dest` chain to
mint/teleport assets and deposit them to `beneficiary`.

## Review notes

Only around 500 lines are prod code (see `pallet_xcm/src/lib.rs`), the
rest of the PR is new tests and improving existing tests.

---------

Co-authored-by: command-bot <>
      e7651cf4
  43. Dec 01, 2023
  45. Nov 30, 2023
  47. Nov 28, 2023
  49. Nov 24, 2023
  51. Nov 21, 2023
    • Francisco Aguirre's avatar
      Different XCM builders, default one requires fee payment (#2253) · b3841b6b
      Francisco Aguirre authored 
      Adding on top of the new builder pattern for creating XCM programs, I'm
adding some more APIs:

```rust
let paying_fees: Xcm<()> = Xcm::builder() // Only allow paying for fees
  .withdraw_asset() // First instruction has to load the holding register
  .buy_execution() // Second instruction has to be `buy_execution`
  .build();

let paying_fees_invalid: Xcm<()> = Xcm::builder()
  .withdraw_asset()
  .build(); // Invalid, need to pay for fees

let not_paying_fees: Xcm<()> = Xcm::builder_unpaid()
  .unpaid_execution() // Needed
  .withdraw_asset()
  .deposit_asset()
  .build();

let all_goes: Xcm<()> = Xcm::builder_unsafe() // You can do anything
  .withdraw_asset()
  .deposit_asset()
  .build();
```

The invalid bits are because the methods don't even exist on the types
that you'd want to call them on.

---------

Co-authored-by: command-bot <>
      b3841b6b
  53. Nov 15, 2023
    • Adrian Catangiu's avatar
      xcm: SovereignPaidRemoteExporter: remove unused RefundSurplus instruction (#2312) · 824b7823
      Adrian Catangiu authored 
      Refunding surplus happens anyway on xcm_executor::post_process(),
automatically refunding surplus to original_origin at the end of
execution. Since SovereignPaidRemoteExporter doesn't ClearOrigin, it can
simply rely on the automatic mechanism.

Furthermore, RefundSurplus instruction refunds _surplus_. Surplus exists
only as a result of Transact, SetErrorHandler or SetAppendix
instructions, none of which being part of the
SovereignPaidRemoteExporter XCM program. So surplus is always zero here
anyway.
      824b7823
    • Adrian Catangiu's avatar
      pallet-xcm: use XcmTeleportFilter for teleported fees in reserve transfers (#2322) · f5360436
      Adrian Catangiu authored 
      Disallow reserve transfers that use teleportable fees if `(origin,
fees)` matches `XcmTeleportFilter`.

Add regression tests for filtering based on `XcmTeleportFilter` for both
`(limited_)reserve_transfer_assets()` and `(limited_)teleport_assets`
extrinsics.
      f5360436
  55. Nov 14, 2023
    • PG Herveou's avatar
      Contracts expose pallet-xcm (#1248) · f517900a
      PG Herveou authored 
      

This PR introduces:
- XCM  host functions `xcm_send`, `xcm_execute`
- An Xcm trait into the config. that proxy these functions to to
`pallet_xcm`, or disable their usage by using `()`.
- A mock_network and xcm_test files to test the newly added xcm-related
functions.

---------

Co-authored-by: default avatarKeith Yeung <[email protected]>
Co-authored-by: default avatarSasha Gryaznov <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: default avatarFrancisco Aguirre <[email protected]>
Co-authored-by: default avatarAlexander Theißen <[email protected]>
      f517900a
    • Branislav Kontur's avatar
      Fix `expect_pallet` benchmarks not relaying on hard-coded `frame_system` dependency version (#2288) · ae1bdcfb
      Branislav Kontur authored 
      ## Problem/Motivation
The benchmark for the `ExpectPallet` XCM instruction uses a hard-coded
version `4.0.0` for the `frame_system` pallet. Unfortunately, this
doesn't work for the `polkadot-fellows/runtimes` repository, where we
use dependencies from `crates.io`, e.g.,
[frame-system::23.0.0.0](https://github.com/polkadot-fellows/runtimes/blob/dd7f86f0d50064481ed0b7c0218494a5cfad997e/relay/kusama/Cargo.toml#L83).

Closes: https://github.com/paritytech/polkadot-sdk/issues/2284 

## Solution
This PR fixes the benchmarks that require pallet information and enables
the runtime to provide the correct/custom pallet information. The
default implementation provides `frame_system::Pallet` with index `0`,
where the version is not hard-coded but read from the runtime.


## Local testing

Added log for `T::valid_pallet` to the benchmarks like:
```
let valid_pallet = T::valid_pallet();
log::info!(
	target: "frame::benchmark::pallet",
	"valid_pallet: {}::{}::{}::{}::{}",
	valid_pallet.index,
	valid_pallet.module_name,
	valid_pallet.crate_version.major,
	valid_pallet.crate_version.minor,
	valid_pallet.crate_version.patch,
);
```

Run benchmarks for `westend`:
```
cargo run --bin=polkadot --features=runtime-benchmarks -- benchmark pallet --steps=2 --repeat=1 --extrinsic=* --heap-pages=4096 --json-file=./bench.json --chain=westend-dev --template=./polkadot/xcm/pallet-xcm-benchmarks/template.hbs --pallet=pallet_xcm_benchmarks::generic --output=./polkadot/runtime/westend/src/weights/xcm
```

---

For actual `frame_system` version:
```
[package]
name = "frame-system"
version = "4.0.0-dev"
```

Log dump:
```
2023-11-13 12:56:45 Starting benchmark: pallet_xcm_benchmarks::generic::query_pallet    
2023-11-13 12:56:45 valid_pallet: 0::frame_system::4::0::0    
2023-11-13 12:56:45 valid_pallet: 0::frame_system::4::0::0    
2023-11-13 12:56:45 valid_pallet: 0::frame_system::4::0::0    
2023-11-13 12:56:45 Starting benchmark: pallet_xcm_benchmarks::generic::expect_pallet    
2023-11-13 12:56:45 valid_pallet: 0::frame_system::4::0::0    
2023-11-13 12:56:45 valid_pallet: 0::frame_system::4::0::0    
2023-11-13 12:56:45 valid_pallet: 0::frame_system::4::0::0 
```


For changed `frame_system` version:
```
[package]
name = "frame-system"
version = "5.1.3-dev"
```

Log dump:
```
2023-11-13 12:51:51 Starting benchmark: pallet_xcm_benchmarks::generic::query_pallet    
2023-11-13 12:51:51 valid_pallet: 0::frame_system::5::1::3    
2023-11-13 12:51:51 valid_pallet: 0::frame_system::5::1::3    
2023-11-13 12:51:51 valid_pallet: 0::frame_system::5::1::3    
2023-11-13 12:51:51 Starting benchmark: pallet_xcm_benchmarks::generic::expect_pallet    
2023-11-13 12:51:51 valid_pallet: 0::frame_system::5::1::3    
2023-11-13 12:51:51 valid_pallet: 0::frame_system::5::1::3    
2023-11-13 12:51:51 valid_pallet: 0::frame_system::5::1::3
```

## References

Closes: https://github.com/paritytech/polkadot-sdk/issues/2284
      ae1bdcfb