- Mar 13, 2024
-
-
georgepisaltu authored
Revert "FRAME: Create `TransactionExtension` as a replacement for `SignedExtension` (#2280)" (#3665) This PR reverts #2280 which introduced `TransactionExtension` to replace `SignedExtension`. As a result of the discussion [here](https://github.com/paritytech/polkadot-sdk/pull/3623#issuecomment-1986789700), the changes will be reverted for now with plans to reintroduce the concept in the future. --------- Signed-off-by:georgepisaltu <[email protected]>
-
- Mar 04, 2024
-
-
Gavin Wood authored
Closes #2160 First part of [Extrinsic Horizon](https://github.com/paritytech/polkadot-sdk/issues/2415) Introduces a new trait `TransactionExtension` to replace `SignedExtension`. Introduce the idea of transactions which obey the runtime's extensions and have according Extension data (né Extra data) yet do not have hard-coded signatures. Deprecate the terminology of "Unsigned" when used for transactions/extrinsics owing to there now being "proper" unsigned transactions which obey the extension framework and "old-style" unsigned which do not. Instead we have __*General*__ for the former and __*Bare*__ for the latter. (Ultimately, the latter will be phased out as a type of transaction, and Bare will only be used for Inherents.) Types of extrinsic are now therefore: - Bare (no hardcoded signature, no Extra data; used to be known as "Unsigned") - Bare transactions (deprecated): Gossiped, validated with `ValidateUnsigned` (deprecated) and the `_bare_compat` bits of `TransactionExtension` (deprecated). - Inherents: Not gossiped, validated with `ProvideInherent`. - Extended (Extra data): Gossiped, validated via `TransactionExtension`. - Signed transactions (with a hardcoded signature). - General transactions (without a hardcoded signature). `TransactionExtension` differs from `SignedExtension` because: - A signature on the underlying transaction may validly not be present. - It may alter the origin during validation. - `pre_dispatch` is renamed to `prepare` and need not contain the checks present in `validate`. - `validate` and `prepare` is passed an `Origin` rather than a `AccountId`. - `validate` may pass arbitrary information into `prepare` via a new user-specifiable type `Val`. - `AdditionalSigned`/`additional_signed` is renamed to `Implicit`/`implicit`. It is encoded *for the entire transaction* and passed in to each extension as a new argument to `validate`. This facilitates the ability of extensions to acts as underlying crypto. There is a new `DispatchTransaction` trait which contains only default function impls and is impl'ed for any `TransactionExtension` impler. It provides several utility functions which reduce some of the tedium from using `TransactionExtension` (indeed, none of its regular functions should now need to be called directly). Three transaction version discriminator ("versions") are now permissible: - 0b000000100: Bare (used to be called "Unsigned"): contains Signature or Extra (extension data). After bare transactions are no longer supported, this will strictly identify an Inherents only. - 0b100000100: Old-school "Signed" Transaction: contains Signature and Extra (extension data). - 0b010000100: New-school "General" Transaction: contains Extra (extension data), but no Signature. For the New-school General Transaction, it becomes trivial for authors to publish extensions to the mechanism for authorizing an Origin, e.g. through new kinds of key-signing schemes, ZK proofs, pallet state, mutations over pre-authenticated origins or any combination of the above. ## Code Migration ### NOW: Getting it to build Wrap your `SignedExtension`s in `AsTransactionExtension`. This should be accompanied by renaming your aggregate type in line with the new terminology. E.g. Before: ```rust /// The SignedExtension to the basic transaction logic. pub type SignedExtra = ( /* snip */ MySpecialSignedExtension, ); /// Unchecked extrinsic type as expected by this runtime. pub type UncheckedExtrinsic = generic::UncheckedExtrinsic<Address, RuntimeCall, Signature, SignedExtra>; ``` After: ```rust /// The extension to the basic transaction logic. pub type TxExtension = ( /* snip */ AsTransactionExtension<MySpecialSignedExtension>, ); /// Unchecked extrinsic type as expected by this runtime. pub type UncheckedExtrinsic = generic::UncheckedExtrinsic<Address, RuntimeCall, Signature, TxExtension>; ``` You'll also need to alter any transaction building logic to add a `.into()` to make the conversion happen. E.g. Before: ```rust fn construct_extrinsic( /* snip */ ) -> UncheckedExtrinsic { let extra: SignedExtra = ( /* snip */ MySpecialSignedExtension::new(/* snip */), ); let payload = SignedPayload::new(call.clone(), extra.clone()).unwrap(); let signature = payload.using_encoded(|e| sender.sign(e)); UncheckedExtrinsic::new_signed( /* snip */ Signature::Sr25519(signature), extra, ) } ``` After: ```rust fn construct_extrinsic( /* snip */ ) -> UncheckedExtrinsic { let tx_ext: TxExtension = ( /* snip */ MySpecialSignedExtension::new(/* snip */).into(), ); let payload = SignedPayload::new(call.clone(), tx_ext.clone()).unwrap(); let signature = payload.using_encoded(|e| sender.sign(e)); UncheckedExtrinsic::new_signed( /* snip */ Signature::Sr25519(signature), tx_ext, ) } ``` ### SOON: Migrating to `TransactionExtension` Most `SignedExtension`s can be trivially converted to become a `TransactionExtension`. There are a few things to know. - Instead of a single trait like `SignedExtension`, you should now implement two traits individually: `TransactionExtensionBase` and `TransactionExtension`. - Weights are now a thing and must be provided via the new function `fn weight`. #### `TransactionExtensionBase` This trait takes care of anything which is not dependent on types specific to your runtime, most notably `Call`. - `AdditionalSigned`/`additional_signed` is renamed to `Implicit`/`implicit`. - Weight must be returned by implementing the `weight` function. If your extension is associated with a pallet, you'll probably want to do this via the pallet's existing benchmarking infrastructure. #### `TransactionExtension` Generally: - `pre_dispatch` is now `prepare` and you *should not reexecute the `validate` functionality in there*! - You don't get an account ID any more; you get an origin instead. If you need to presume an account ID, then you can use the trait function `AsSystemOriginSigner::as_system_origin_signer`. - You get an additional ticket, similar to `Pre`, called `Val`. This defines data which is passed from `validate` into `prepare`. This is important since you should not be duplicating logic from `validate` to `prepare`, you need a way of passing your working from the former into the latter. This is it. - This trait takes two type parameters: `Call` and `Context`. `Call` is the runtime call type which used to be an associated type; you can just move it to become a type parameter for your trait impl. `Context` is not currently used and you can safely implement over it as an unbounded type. - There's no `AccountId` associated type any more. Just remove it. Regarding `validate`: - You get three new parameters in `validate`; all can be ignored when migrating from `SignedExtension`. - `validate` returns a tuple on success; the second item in the tuple is the new ticket type `Self::Val` which gets passed in to `prepare`. If you use any information extracted during `validate` (off-chain and on-chain, non-mutating) in `prepare` (on-chain, mutating) then you can pass it through with this. For the tuple's last item, just return the `origin` argument. Regarding `prepare`: - This is renamed from `pre_dispatch`, but there is one change: - FUNCTIONALITY TO VALIDATE THE TRANSACTION NEED NOT BE DUPLICATED FROM `validate`!! - (This is different to `SignedExtension` which was required to run the same checks in `pre_dispatch` as in `validate`.) Regarding `post_dispatch`: - Since there are no unsigned transactions handled by `TransactionExtension`, `Pre` is always defined, so the first parameter is `Self::Pre` rather than `Option<Self::Pre>`. If you make use of `SignedExtension::validate_unsigned` or `SignedExtension::pre_dispatch_unsigned`, then: - Just use the regular versions of these functions instead. - Have your logic execute in the case that the `origin` is `None`. - Ensure your transaction creation logic creates a General Transaction rather than a Bare Transaction; this means having to include all `TransactionExtension`s' data. - `ValidateUnsigned` can still be used (for now) if you need to be able to construct transactions which contain none of the extension data, however these will be phased out in stage 2 of the Transactions Horizon, so you should consider moving to an extension-centric design. ## TODO - [x] Introduce `CheckSignature` impl of `TransactionExtension` to ensure it's possible to have crypto be done wholly in a `TransactionExtension`. - [x] Deprecate `SignedExtension` and move all uses in codebase to `TransactionExtension`. - [x] `ChargeTransactionPayment` - [x] `DummyExtension` - [x] `ChargeAssetTxPayment` (asset-tx-payment) - [x] `ChargeAssetTxPayment` (asset-conversion-tx-payment) - [x] `CheckWeight` - [x] `CheckTxVersion` - [x] `CheckSpecVersion` - [x] `CheckNonce` - [x] `CheckNonZeroSender` - [x] `CheckMortality` - [x] `CheckGenesis` - [x] `CheckOnlySudoAccount` - [x] `WatchDummy` - [x] `PrevalidateAttests` - [x] `GenericSignedExtension` - [x] `SignedExtension` (chain-polkadot-bulletin) - [x] `RefundSignedExtensionAdapter` - [x] Implement `fn weight` across the board. - [ ] Go through all pre-existing extensions which assume an account signer and explicitly handle the possibility of another kind of origin. - [x] `CheckNonce` should probably succeed in the case of a non-account origin. - [x] `CheckNonZeroSender` should succeed in the case of a non-account origin. - [x] `ChargeTransactionPayment` and family should fail in the case of a non-account origin. - [ ] - [x] Fix any broken tests. --------- Signed-off-by:Alexandru Vasile <[email protected]> Signed-off-by:
dependabot[bot] <[email protected]> Signed-off-by:
Oliver Tale-Yazdi <[email protected]> Signed-off-by:
Alexandru Gheorghe <[email protected]> Signed-off-by:
Andrei Sandu <[email protected]> Co-authored-by:
Nikhil Gupta <[email protected]> Co-authored-by:
georgepisaltu <[email protected]> Co-authored-by:
Chevdor <[email protected]> Co-authored-by:
Bastian Köcher <[email protected]> Co-authored-by:
Maciej <[email protected]> Co-authored-by:
Javier Viola <[email protected]> Co-authored-by:
Marcin S. <[email protected]> Co-authored-by:
Tsvetomir Dimitrov <[email protected]> Co-authored-by:
Javier Bullrich <[email protected]> Co-authored-by:
Koute <[email protected]> Co-authored-by:
Adrian Catangiu <[email protected]> Co-authored-by:
Vladimir Istyufeev <[email protected]>
Co-authored-by: Ross Bulat <[email protected]> Co-authored-by:
Gonçalo Pestana <[email protected]> Co-authored-by:
Liam Aharon <[email protected]> Co-authored-by:
Svyatoslav Nikolsky <[email protected]> Co-authored-by:
André Silva <[email protected]> Co-authored-by:
s0me0ne-unkn0wn <[email protected]> Co-authored-by:
ordian <[email protected]> Co-authored-by:
Sebastian Kunert <[email protected]> Co-authored-by:
Aaro Altonen <[email protected]> Co-authored-by:
Dmitry Markin <[email protected]> Co-authored-by:
Alexandru Vasile <[email protected]> Co-authored-by:
Alexander Samusev <[email protected]> Co-authored-by:
Julian Eager <[email protected]> Co-authored-by:
Michal Kucharczyk <[email protected]> Co-authored-by:
Davide Galassi <[email protected]> Co-authored-by:
Dónal Murray <[email protected]> Co-authored-by:
yjh <[email protected]> Co-authored-by:
Tom Mi <[email protected]> Co-authored-by:
dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by:
Will | Paradox | ParaNodes.io <[email protected]> Co-authored-by:
Bastian Köcher <[email protected]> Co-authored-by:
Joshy Orndorff <[email protected]> Co-authored-by:
Joshy Orndorff <[email protected]> Co-authored-by:
PG Herveou <[email protected]> Co-authored-by:
Alexander Theißen <[email protected]> Co-authored-by:
Kian Paimani <[email protected]> Co-authored-by:
Juan Girini <[email protected]> Co-authored-by:
bader y <[email protected]> Co-authored-by:
James Wilson <[email protected]> Co-authored-by:
joe petrowski <[email protected]> Co-authored-by:
asynchronous rob <[email protected]> Co-authored-by:
Parth <[email protected]> Co-authored-by:
Andrew Jones <[email protected]> Co-authored-by:
Jonathan Udd <[email protected]> Co-authored-by:
Serban Iorga <[email protected]> Co-authored-by:
Egor_P <[email protected]> Co-authored-by:
Branislav Kontur <[email protected]> Co-authored-by:
Evgeny Snitko <[email protected]> Co-authored-by:
Just van Stam <[email protected]> Co-authored-by:
Francisco Aguirre <[email protected]> Co-authored-by:
gupnik <[email protected]> Co-authored-by:
dzmitry-lahoda <[email protected]> Co-authored-by:
zhiqiangxu <[email protected]> Co-authored-by:
Nazar Mokrynskyi <[email protected]> Co-authored-by:
Anwesh <[email protected]> Co-authored-by:
cheme <[email protected]> Co-authored-by:
Sam Johnson <[email protected]> Co-authored-by:
kianenigma <[email protected]> Co-authored-by:
Jegor Sidorenko <[email protected]> Co-authored-by:
Muharem <[email protected]> Co-authored-by:
joepetrowski <[email protected]> Co-authored-by:
Alexandru Gheorghe <[email protected]> Co-authored-by:
Gabriel Facco de Arruda <[email protected]> Co-authored-by:
Squirrel <[email protected]> Co-authored-by:
Andrei Sandu <[email protected]> Co-authored-by:
-
- Feb 26, 2024
-
-
Branislav Kontur authored
## Problem During the bumping of the `polkadot-fellows` repository to `[email protected]`, I encountered a situation where the benchmarks `teleport_assets` and `reserve_transfer_assets` in AssetHubKusama started to fail. This issue arose due to a decreased ED balance for AssetHubs introduced [here](https://github.com/polkadot-fellows/runtimes/pull/158/files#diff-80668ff8e793b64f36a9a3ec512df5cbca4ad448c157a5d81abda1b15f35f1daR213), and also because of a [missing CI pipeline](https://github.com/polkadot-fellows/runtimes/issues/197) to check the benchmarks, which went unnoticed. These benchmarks expect the `caller` to have enough: 1. balance to transfer (BTT) 2. balance for paying delivery (BFPD). So the initial balance was calculated as `ED * 100`, which seems reasonable: ``` const ED_MULTIPLIER: u32 = 100; let balance = existential_deposit.saturating_mul(ED_MULTIPLIER.into());` ``` The problem arises when the price for delivery is 100 times higher than the existential deposit. In other words, when `ED * 100` does not cover `BTT` + `BFPD`. I check AHR/AHW/AHK/AHP and this problem has only AssetHubKusama ``` ED: 3333333 calculated price to parent delivery: 1031666634 (from xcm logs from the benchmark) --- 3333333 * 100 - BTT(3333333) - BFPD(1031666634) = −701666667 ``` which results in the error; ``` 2024-02-23 09:19:42 Unable to charge fee with error Module(ModuleError { index: 31, error: [17, 0, 0, 0], message: Some("FeesNotMet") }) Error: Input("Benchmark pallet_xcm::reserve_transfer_assets failed: FeesNotMet") ``` ## Solution The benchmarks `teleport_assets` and `reserve_transfer_assets` were fixed by removing `ED * 100` and replacing it with `DeliveryHelper` logic, which calculates the (almost real) price for delivery and sets it along with the existential deposit as the initial balance for the account used in the benchmark. ## TODO - [ ] patch for 1.6 - https://github.com/paritytech/polkadot-sdk/pull/3466 - [ ] patch for 1.7 - https://github.com/paritytech/polkadot-sdk/pull/3465 - [ ] patch for 1.8 - TODO: PR --------- Co-authored-by:
-
- Feb 19, 2024
-
-
PG Herveou authored
## Xcm changes: - Fix `pallet_xcm::execute`, move the logic into The `ExecuteController` so it can be shared with anything that implement that trait. - Make `ExecuteController::execute` retursn `DispatchErrorWithPostInfo` instead of `DispatchError`, so that we don't charge the full `max_weight` provided if the execution is incomplete (useful for force_batch or contracts calls) - Fix docstring for `pallet_xcm::execute`, to reflect the changes from #2405 - Update the signature for `ExecuteController::execute`, we don't need to return the `Outcome` anymore since we only care about `Outcome::Complete` ## Contracts changes: - Update host fn `xcm_exexute`, we don't need to write the `Outcome` to the sandbox memory anymore. This was also not charged as well before so it if fixes this too. - One of the issue was that the dry_run of a contract that call `xcm_execute` would exhaust the `gas_limit`. This is because `XcmExecuteController::execute` takes a `max_weight` argument, and since we don't want the user to specify it manually we were passing everything left by pre-charghing `ctx.ext.gas_meter().gas_left()` - To fix it I added a `fn influence_lowest_limit` on the `Token` trait and make it return false for `RuntimeCost::XcmExecute`. - Got rid of the `RuntimeToken` indirection, we can just use `RuntimeCost` directly. --------- Co-authored-by: command-bot <>
-
- Feb 13, 2024
-
-
Branislav Kontur authored
I found out during the cleanup of this deprecation message in the `polkadot-fellows` repository that we deprecated `CurrencyAdapter` without making the recommended changes. ## TODO - [ ] fix `polkadot-fellows` bump to 1.6.0 https://github.com/polkadot-fellows/runtimes/pull/159 --------- Co-authored-by:
-
- Feb 12, 2024
-
-
Oliver Tale-Yazdi authoredChanges (partial https://github.com/paritytech/polkadot-sdk/issues/994): - Set log to `0.4.20` everywhere - Lift `log` to the workspace Starting with a simpler one after seeing https://github.com/paritytech/polkadot-sdk/pull/2065 from @jsdw . This sets the `default-features` to `false` in the root and then overwrites that in each create to its original value. This is necessary since otherwise the `default` features are additive and its impossible to disable them in the crate again once they are enabled in the workspace. I am using a tool to do this, so its mostly a test to see that it works as expected. --------- Signed-off-by:
-
- Jan 31, 2024
-
-
Branislav Kontur authored
This PR addresses two issues: - It modifies `DepositAsset`'s asset filter from `All` to `AllCounted(1)` to prevent potentially charging excessive weight/fees. This adjustment avoids situations where fees could be calculated based on the count of assets, as illustrated [here](https://github.com/paritytech/polkadot-sdk/blob/master/cumulus/parachains/runtimes/bridge-hubs/bridge-hub-rococo/src/weights/xcm/mod.rs#L38-L46). - It encapsulates `DepositAsset` with `SetAppendix` to ensure that `fees` are not trapped in any case. For instance, this prevents issues when `ExportXcm::validate` encounters an error during the processing of `ExportMessage`.
-
Branislav Kontur authored
[frame] `#[pallet::composite_enum]` improved variant count handling + removed `pallet_balances`'s `MaxHolds` config (#2657) I started this investigation/issue based on @liamaharon question [here](https://github.com/paritytech/polkadot-sdk/pull/1801#discussion_r1410452499). ## Problem The `pallet_balances` integrity test should correctly detect that the runtime has correct distinct `HoldReasons` variant count. I assume the same situation exists for RuntimeFreezeReason. It is not a critical problem, if we set `MaxHolds` with a sufficiently large value, everything should be ok. However, in this case, the integrity_test check becomes less useful. **Situation for "any" runtime:** - `HoldReason` enums from different pallets: ```rust /// from pallet_nis #[pallet::composite_enum] pub enum HoldReason { NftReceipt, } /// from pallet_preimage #[pallet::composite_enum] pub enum HoldReason { Preimage, } // from pallet_state-trie-migration #[pallet::composite_enum] pub enum HoldReason { SlashForContinueMigrate, SlashForMigrateCustomTop, SlashForMigrateCustomChild, } ``` - generated `RuntimeHoldReason` enum looks like: ```rust pub enum RuntimeHoldReason { #[codec(index = 32u8)] Preimage(pallet_preimage::HoldReason), #[codec(index = 38u8)] Nis(pallet_nis::HoldReason), #[codec(index = 42u8)] StateTrieMigration(pallet_state_trie_migration::HoldReason), } ``` - composite enum `RuntimeHoldReason` variant count is detected as `3` - we set `type MaxHolds = ConstU32<3>` - `pallet_balances::integrity_test` is ok with `3`(at least 3) However, the real problem can occur in a live runtime where some functionality might stop working. This is due to a total of 5 distinct hold reasons (for pallets with multi-instance support, it is even more), and not all of them can be used because of an incorrect `MaxHolds`, which is deemed acceptable according to the `integrity_test`: ``` // pseudo-code - if we try to call all of these: T::Currency::hold(&pallet_nis::HoldReason::NftReceipt.into(), &nft_owner, deposit)?; T::Currency::hold(&pallet_preimage::HoldReason::Preimage.into(), &nft_owner, deposit)?; T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForContinueMigrate.into(), &nft_owner, deposit)?; // With `type MaxHolds = ConstU32<3>` these two will fail T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomTop.into(), &nft_owner, deposit)?; T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomChild.into(), &nft_owner, deposit)?; ``` ## Solutions A macro `#[pallet::*]` expansion is extended of `VariantCount` implementation for the `#[pallet::composite_enum]` enum type. This expansion generates the `VariantCount` implementation for pallets' `HoldReason`, `FreezeReason`, `LockId`, and `SlashReason`. Enum variants must be plain enum values without fields to ensure a deterministic count. The composite runtime enum, `RuntimeHoldReason` and `RuntimeFreezeReason`, now sets `VariantCount::VARIANT_COUNT` as the sum of pallets' enum `VariantCount::VARIANT_COUNT`: ```rust #[frame_support::pallet(dev_mode)] mod module_single_instance { #[pallet::composite_enum] pub enum HoldReason { ModuleSingleInstanceReason1, ModuleSingleInstanceReason2, } ... } #[frame_support::pallet(dev_mode)] mod module_multi_instance { #[pallet::composite_enum] pub enum HoldReason<I: 'static = ()> { ModuleMultiInstanceReason1, ModuleMultiInstanceReason2, ModuleMultiInstanceReason3, } ... } impl self::sp_api_hidden_includes_construct_runtime::hidden_include::traits::VariantCount for RuntimeHoldReason { const VARIANT_COUNT: u32 = 0 + module_single_instance::HoldReason::VARIANT_COUNT + module_multi_instance::HoldReason::<module_multi_instance::Instance1>::VARIANT_COUNT + module_multi_instance::HoldReason::<module_multi_instance::Instance2>::VARIANT_COUNT + module_multi_instance::HoldReason::<module_multi_instance::Instance3>::VARIANT_COUNT; } ``` In addition, `MaxHolds` is removed (as suggested [here](https://github.com/paritytech/polkadot-sdk/pull/2657#discussion_r1443324573)) from `pallet_balances`, and its `Holds` are now bounded to `RuntimeHoldReason::VARIANT_COUNT`. Therefore, there is no need to let the runtime specify `MaxHolds`. ## For reviewers Relevant changes can be found here: - `substrate/frame/support/procedural/src/lib.rs` - `substrate/frame/support/procedural/src/pallet/parse/composite.rs` - `substrate/frame/support/procedural/src/pallet/expand/composite.rs` - `substrate/frame/support/procedural/src/construct_runtime/expand/composite_helper.rs` - `substrate/frame/support/procedural/src/construct_runtime/expand/hold_reason.rs` - `substrate/frame/support/procedural/src/construct_runtime/expand/freeze_reason.rs` - `substrate/frame/support/src/traits/misc.rs` And the rest of the files is just about removed `MaxHolds` from `pallet_balances` ## Next steps Do the same for `MaxFreezes` https://github.com/paritytech/polkadot-sdk/issues/2997. --------- Co-authored-by: command-bot <> Co-authored-by:
-
- Jan 26, 2024
-
-
Liam Aharon authoredRelated https://github.com/paritytech/polkadot-sdk/issues/3032 --- Using https://github.com/liamaharon/cargo-workspace-version-tools/ `cargo run -- sync --path ../polkadot-sdk` --------- Signed-off-by:
-
Sergej Sakac authored
This PR introduces a new `NonFungibleAdapter`. It will be useful for enabling cross-chain Coretime region transfers, as the existing `NonFungiblesAdapter` is unsuitable for this purpose. This is due to the fact that there is only one class of items within the `pallet-broker`, i.e., the Coretime regions. --------- Co-authored-by:
Dónal Murray <[email protected]>
-
- Jan 24, 2024
-
-
Just van Stam authored
Moved from: https://github.com/paritytech/polkadot/pull/6951 closes https://github.com/paritytech/polkadot-sdk/issues/490 - [x] update cumulus --- This PR introduces transactional processing of certain xcm instructions. For the list of instructions checkout https://github.com/paritytech/polkadot-sdk/issues/490. The transactional processing is implemented as an xcm-executor config item. The two implementations in this PR are `FrameTransactionalProcessor` and `()`. The `()` implementation does no transactional processing. Each implementation of the `ProcessTransaction` trait has an `IS_TRANSACTIONAL` const that tells the XCVM if transactional processing is actually implemented. If Transactional processing is implemented, changes to touched registers should also be rolled back to prevent inconsistencies. Note for reviewers: Check out the following safety assumption: https://github.com/paritytech/polkadot-sdk/pull/1222/files#diff-4effad7d8c1c9de19fd27e18661cbf2128c8718f3b2420a27d2f816e0749ea53R30 --------- Co-authored-by:
Keith Yeung <[email protected]> Co-authored-by:
-
- Jan 23, 2024
-
-
Niklas Adolfsson authored
This is a rather big change in jsonrpsee, the major things in this bump are: - Server backpressure (the subscription impls are modified to deal with that) - Allow custom error types / return types (remove jsonrpsee::core::Error and jsonrpee::core::CallError) - Bug fixes (graceful shutdown in particular not used by substrate anyway) - Less dependencies for the clients in particular - Return type requires Clone in method call responses - Moved to tokio channels - Async subscription API (not used in this PR) Major changes in this PR: - The subscriptions are now bounded and if subscription can't keep up with the server it is dropped - CLI: add parameter to configure the jsonrpc server bounded message buffer (default is 64) - Add our own subscription helper to deal with the unbounded streams in substrate The most important things in this PR to review is the added helpers functions in `substrate/client/rpc/src/utils.rs` and the rest is pretty much chore. Regarding the "bounded buffer limit" it may cause the server to handle the JSON-RPC calls slower than before. The message size limit is bounded by "--rpc-response-size" thus "by default 10MB * 64 = 640MB" but the subscription message size is not covered by this limit and could be capped as well. Hopefully the last release prior to 1.0, sorry in advance for a big PR Previous attempt: https://github.com/paritytech/substrate/pull/13992 Resolves https://github.com/paritytech/polkadot-sdk/issues/748, resolves https://github.com/paritytech/polkadot-sdk/issues/627
-
- Jan 22, 2024
-
-
joe petrowski authored
Clean up all the old syntax. --------- Co-authored-by: command-bot <> Co-authored-by:
Maksym H <[email protected]>
-
- Jan 18, 2024
-
-
Tsvetomir Dimitrov authored
Backport of https://github.com/paritytech/polkadot-sdk/pull/1863 to master Extend candidate sanitation in paras_inherent by removing backing votes from disabled validators. Check https://github.com/paritytech/polkadot-sdk/issues/1592 for more details. This change is related to the disabling strategy implementation (https://github.com/paritytech/polkadot-sdk/pull/2226). --------- Co-authored-by:
ordian <[email protected]> Co-authored-by:
-
- Jan 16, 2024
-
-
Francisco Aguirre authored
# Note for reviewer Most changes are just syntax changes necessary for the new version. Most important files should be the ones under the `xcm` folder. # Description Added XCMv4. ## Removed `Multi` prefix The following types have been renamed: - MultiLocation -> Location - MultiAsset -> Asset - MultiAssets -> Assets - InteriorMultiLocation -> InteriorLocation - MultiAssetFilter -> AssetFilter - VersionedMultiAsset -> VersionedAsset - WildMultiAsset -> WildAsset - VersionedMultiLocation -> VersionedLocation In order to fix a name conflict, the `Assets` in `xcm-executor` were renamed to `HoldingAssets`, as they represent assets in holding. ## Removed `Abstract` asset id It was not being used anywhere and this simplifies the code. Now assets are just constructed as follows: ```rust let asset: Asset = (AssetId(Location::new(1, Here)), 100u128).into(); ``` No need for specifying `Concrete` anymore. ## Outcome is now a named fields struct Instead of ```rust pub enum Outcome { Complete(Weight), Incomplete(Weight, Error), Error(Error), } ``` we now have ```rust pub enum Outcome { Complete { used: Weight }, Incomplete { used: Weight, error: Error }, Error { error: Error }, } ``` ## Added Reanchorable trait Now both locations and assets implement this trait, making it easier to reanchor both. ## New syntax for building locations and junctions Now junctions are built using the following methods: ```rust let location = Location { parents: 1, interior: [Parachain(1000), PalletInstance(50), GeneralIndex(1984)].into() }; ``` or ```rust let location = Location::new(1, [Parachain(1000), PalletInstance(50), GeneralIndex(1984)]); ``` And they are matched like so: ```rust match location.unpack() { (1, [Parachain(id)]) => ... (0, Here) => ..., (1, [_]) => ..., } ``` This syntax is mandatory in v4, and has been also implemented for v2 and v3 for easier migration. This was needed to make all sizes smaller. # TODO - [x] Scaffold v4 - [x] Port github.com/paritytech/polkadot/pull/7236 - [x] Remove `Multi` prefix - [x] Remove `Abstract` asset id --------- Co-authored-by: command-bot <> Co-authored-by:
-
- Dec 26, 2023
-
-
Bastian Köcher authored
Adds more logging to the XCM execution for better debugging.
-
- Dec 18, 2023
-
-
Branislav Kontur authored
This PR contains just a few clippy fixes and nits, which are, however, relaxed by workspace clippy settings here: https://github.com/paritytech/polkadot-sdk/blob/master/Cargo.toml#L483-L506 --------- Co-authored-by:
Dmitry Sinyavin <[email protected]> Co-authored-by:
-
- Dec 14, 2023
-
-
Francisco Aguirre authored
In the move from the old `Currency` traits to the new `fungible/s` family of traits, we already had the `FungiblesAdapter` and `NonFungiblesAdapter` for multiple fungible and non fungible assets respectively. However, for handling only one fungible asset, we were missing a `FungibleAdapter`, and so used the old `CurrencyAdapter` instead. This PR aims to fill in that gap, and provide the new adapter for more updated examples. I marked the old `CurrencyAdapter` as deprecated as part of this PR, and I'll change it to the new `FungibleAdapter` in a following PR. The two stages are separated so as to not bloat this PR with some name fixes in tests. --------- Co-authored-by: command-bot <>
-
- Dec 13, 2023
-
-
Squirrel authored
We currently use a bit of a hack in `.cargo/config` to make sure that clippy isn't too annoying by specifying the list of lints. There is now a stable way to define lints for a workspace. The only down side is that every crate seems to have to opt into this so there's a *few* files modified in this PR. Dependencies: - [x] PR that upgrades CI to use rust 1.74 is merged. --------- Co-authored-by:
-
- Dec 12, 2023
-
-
Branislav Kontur authored
## Summary This pull request proposes a solution for improved control of the versioned XCM flow over the bridge (across different consensus chains) and resolves the situation where the sending chain/consensus has already migrated to a higher XCM version than the receiving chain/consensus. ## Problem/Motivation The current flow over the bridge involves a transfer from AssetHubRococo (AHR) to BridgeHubRococo (BHR) to BridgeHubWestend (BHW) and finally to AssetHubWestend (AHW), beginning with a reserve-backed transfer on AHR. In this process: 1. AHR sends XCM `ExportMessage` through `XcmpQueue`, incorporating XCM version checks using the `WrapVersion` feature, influenced by `pallet_xcm::SupportedVersion` (managed by `pallet_xcm::force_xcm_version` or version discovery). 2. BHR handles the `ExportMessage` instruction, utilizing the latest XCM version. The `HaulBlobExporter` converts the inner XCM to [`VersionedXcm::from`](https://github.com/paritytech/polkadot-sdk/blob/63ac2471/polkadot/xcm/xcm-builder/src/universal_exports.rs#L465-L467), also using the latest XCM version. However, challenges arise: - Incompatibility when BHW uses a different version than BHR. For instance, if BHR migrates to **XCMv4** while BHW remains on **XCMv3**, BHR's `VersionedXcm::from` uses `VersionedXcm::V4` variant, causing encoding issues for BHW. ``` /// Just a simulation of possible error, which could happen on BHW /// (this code is based on actual master without XCMv4) let encoded = hex_literal::hex!("0400"); println!("{:?}", VersionedXcm::<()>::decode(&mut &encoded[..])); Err(Error { cause: None, desc: "Could not decode `VersionedXcm`, variant doesn't exist" }) ``` - Similar compatibility issues exist between AHR and AHW. ## Solution This pull request introduces the following solutions: 1. **New trait `CheckVersion`** - added to the `xcm` module and exposing `pallet_xcm::SupportedVersion`. This enhancement allows checking the actual XCM version for desired destinations outside of the `pallet_xcm` module. 2. **Version Check in `HaulBlobExporter`** uses `CheckVersion` to check known/configured destination versions, ensuring compatibility. For example, in the scenario mentioned, BHR can store the version `3` for BHW. If BHR is on XCMv4, it will attempt to downgrade the message to version `3` instead of using the latest version `4`. 3. **Version Check in `pallet-xcm-bridge-hub-router`** - this check ensures compatibility with the real destination's XCM version, preventing the unnecessary sending of messages to the local bridge hub if versions are incompatible. These additions aim to improve the control and compatibility of XCM flows over the bridge and addressing issues related to version mismatches. ## Possible alternative solution _(More investigation is needed, and at the very least, it should extend to XCMv4/5. If this proves to be a viable option, I can open an RFC for XCM.)._ Add the `XcmVersion` attribute to the `ExportMessage` so that the sending chain can determine, based on what is stored in `pallet_xcm::SupportedVersion`, the version the destination is using. This way, we may not need to handle the version in `HaulBlobExporter`. ``` ExportMessage { network: NetworkId, destination: InteriorMultiLocation, xcm: Xcm<()> destination_xcm_version: Version, // <- new attritbute }, ``` ``` pub trait ExportXcm { fn validate( network: NetworkId, channel: u32, universal_source: &mut Option<InteriorMultiLocation>, destination: &mut Option<InteriorMultiLocation>, message: &mut Option<Xcm<()>>, destination_xcm_version: Version, , // <- new attritbute ) -> SendResult<Self::Ticket>; ``` ## Future Directions This PR does not fix version discovery over bridge, further investigation will be conducted here: https://github.com/paritytech/polkadot-sdk/issues/2417. ## TODO - [x] `pallet_xcm` mock for tests uses hard-coded XCM version `2` - change to 3 or lastest? - [x] fix `pallet-xcm-bridge-hub-router` - [x] fix HaulBlobExporter with version determination [here](https://github.com/paritytech/polkadot-sdk/blob/2183669d/polkadot/xcm/xcm-builder/src/universal_exports.rs#L465) - [x] add unit-tests to the runtimes - [x] run benchmarks for `ExportMessage` - [x] extend local run scripts about `force_xcm_version(dest, version)` - [ ] when merged, prepare governance calls for Rococo/Westend - [ ] add PRDoc Part of: https://github.com/paritytech/parity-bridges-common/issues/2719 --------- Co-authored-by: command-bot <>
-
- Dec 01, 2023
-
-
Liam Aharon authored
Using taplo, fixes all our broken and inconsistent toml formatting and adds CI to keep them tidy. If people want we can customise the format rules as described here https://taplo.tamasfe.dev/configuration/formatter-options.html @ggwpez , I suggest zepter is used only for checking features are propagated, and leave formatting for taplo to avoid duplicate work and conflicts. TODO - [x] Use `exclude = [...]` syntax in taplo file to ignore zombienet tests instead of deleting the dir --------- Signed-off-by:
-
- Nov 28, 2023
-
-
gupnik authored
Step in https://github.com/paritytech/polkadot-sdk/issues/171 This PR adds `derive_impl` on all `frame_system` config impls for mock runtimes. The overridden configs are maintained as of now to ensure minimal changes. --------- Co-authored-by:
-
- Nov 15, 2023
-
-
Adrian Catangiu authored
Refunding surplus happens anyway on xcm_executor::post_process(), automatically refunding surplus to original_origin at the end of execution. Since SovereignPaidRemoteExporter doesn't ClearOrigin, it can simply rely on the automatic mechanism. Furthermore, RefundSurplus instruction refunds _surplus_. Surplus exists only as a result of Transact, SetErrorHandler or SetAppendix instructions, none of which being part of the SovereignPaidRemoteExporter XCM program. So surplus is always zero here anyway.
-
- Nov 14, 2023
-
-
PG Herveou authored
This PR introduces: - XCM host functions `xcm_send`, `xcm_execute` - An Xcm trait into the config. that proxy these functions to to `pallet_xcm`, or disable their usage by using `()`. - A mock_network and xcm_test files to test the newly added xcm-related functions. --------- Co-authored-by:
Sasha Gryaznov <[email protected]> Co-authored-by: command-bot <> Co-authored-by:
-
- Nov 13, 2023
-
-
Adrian Catangiu authored
## Motivation `pallet-xcm` is the main user-facing interface for XCM functionality, including assets manipulation functions like `teleportAssets()` and `reserve_transfer_assets()` calls. While `teleportAsset()` works both ways, `reserve_transfer_assets()` works only for sending reserve-based assets to a remote destination and beneficiary when the reserve is the _local chain_. ## Solution This PR enhances `pallet_xcm::(limited_)reserve_withdraw_assets` to support transfers when reserves are other chains. This will allow complete, **bi-directional** reserve-based asset transfers user stories using `pallet-xcm`. Enables following scenarios: - transferring assets with local reserve (was previously supported iff asset used as fee also had local reserve - now it works in all cases), - transferring assets with reserve on destination, - transferring assets with reserve on remote/third-party chain (iff assets and fees have same remote reserve), - transferring assets with reserve different than the reserve of the asset to be used as fees - meaning can be used to transfer random asset with local/dest reserve while using DOT for fees on all involved chains, even if DOT local/dest reserve doesn't match asset reserve, - transferring assets with any type of local/dest reserve while using fees which can be teleported between involved chains. All of the above is done by pallet inner logic without the user having to specify which scenario/reserves/teleports/etc. The correct scenario and corresponding XCM programs are identified, and respectively, built automatically based on runtime configuration of trusted teleporters and trusted reserves. #### Current limitations: - while `fees` and "non-fee" `assets` CAN have different reserves (or fees CAN be teleported), the remaining "non-fee" `assets` CANNOT, among themselves, have different reserve locations (this is also implicitly enforced by `MAX_ASSETS_FOR_TRANSFER=2`, but this can be safely increased in the future). - `fees` and "non-fee" `assets` CANNOT have **different remote** reserves (this could also be supported in the future, but adds even more complexity while possibly not being worth it - we'll see what the future holds). Fixes https://github.com/paritytech/polkadot-sdk/issues/1584 Fixes https://github.com/paritytech/polkadot-sdk/issues/2055 --------- Co-authored-by:
-
- Nov 10, 2023
-
-
PG Herveou authored
We are introducing a new set of `XcmController` traits (final name yet to be determined). These traits are implemented by `pallet-xcm` and allows other pallets, such as `pallet_contracts`, to rely on these traits instead of tight coupling them to `pallet-xcm`. Using only the existing Xcm traits would mean duplicating the logic from `pallet-xcm` in these other pallets, which we aim to avoid. Our objective is to ensure that when these APIs are called from `pallet-contracts`, they produce the exact same outcomes as if called directly from `pallet-xcm`. The other benefits is that we can also expose return values to `pallet-contracts` instead of just calling `pallet-xcm` dispatchable and getting a `DispatchResult` back. See traits integration in this PR https://github.com/paritytech/polkadot-sdk/pull/1248, where the traits are used as follow to define and implement `pallet-contracts` Config. ```rs // Contracts config: pub trait Config: frame_system::Config { // ... /// A type that exposes XCM APIs, allowing contracts to interact with other parachains, and /// execute XCM programs. type Xcm: xcm_executor::traits::Controller< OriginFor<Self>, <Self as frame_system::Config>::RuntimeCall, BlockNumberFor<Self>, >; } // implementation impl pallet_contracts::Config for Runtime { // ... type Xcm = pallet_xcm::Pallet<Self>; } ``` --------- Co-authored-by:
-
- Nov 09, 2023
-
-
Keith Yeung authored
This was discovered during a debugging session, and it only served to mask the underlying error, which was not great.
-
- Nov 02, 2023
-
-
Oliver Tale-Yazdi authored
(imported from https://github.com/paritytech/cumulus/pull/2157) ## Changes This MR refactores the XCMP, Parachains System and DMP pallets to use the [MessageQueue](https://github.com/paritytech/substrate/pull/12485) for delayed execution of incoming messages. The DMP pallet is entirely replaced by the MQ and thereby removed. This allows for PoV-bounded execution and resolves a number of issues that stem from the current work-around. All System Parachains adopt this change. The most important changes are in `primitives/core/src/lib.rs`, `parachains/common/src/process_xcm_message.rs`, `pallets/parachain-system/src/lib.rs`, `pallets/xcmp-queue/src/lib.rs` and the runtime configs. ### DMP Queue Pallet The pallet got removed and its logic refactored into parachain-system. Overweight message management can be done directly through the MQ pallet. Final undeployment migrations are provided by `cumulus_pallet_dmp_queue::UndeployDmpQueue` and `DeleteDmpQueue` that can be configured with an aux config trait like: ```rust parameter_types! { pub const DmpQueuePalletName: &'static str = \"DmpQueue\" < CHANGE ME; pub const RelayOrigin: AggregateMessageOrigin = AggregateMessageOrigin::Parent; } impl cumulus_pallet_dmp_queue::MigrationConfig for Runtime { type PalletName = DmpQueuePalletName; type DmpHandler = frame_support::traits::EnqueueWithOrigin<MessageQueue, RelayOrigin>; type DbWeight = <Runtime as frame_system::Config>::DbWeight; } // And adding them to your Migrations tuple: pub type Migrations = ( ... cumulus_pallet_dmp_queue::UndeployDmpQueue<Runtime>, cumulus_pallet_dmp_queue::DeleteDmpQueue<Runtime>, ); ``` ### XCMP Queue pallet Removed all dispatch queue functionality. Incoming XCMP messages are now either: Immediately handled if they are Signals, enqueued into the MQ pallet otherwise. New config items for the XCMP queue pallet: ```rust /// The actual queue implementation that retains the messages for later processing. type XcmpQueue: EnqueueMessage<ParaId>; /// How a XCM over HRMP from a sibling parachain should be processed. type XcmpProcessor: ProcessMessage<Origin = ParaId>; /// The maximal number of suspended XCMP channels at the same time. #[pallet::constant] type MaxInboundSuspended: Get<u32>; ``` How to configure those: ```rust // Use the MessageQueue pallet to store messages for later processing. The `TransformOrigin` is needed since // the MQ pallet itself operators on `AggregateMessageOrigin` but we want to enqueue `ParaId`s. type XcmpQueue = TransformOrigin<MessageQueue, AggregateMessageOrigin, ParaId, ParaIdToSibling>; // Process XCMP messages from siblings. This is type-safe to only accept `ParaId`s. They will be dispatched // with origin `Junction::Sibling(…)`. type XcmpProcessor = ProcessFromSibling< ProcessXcmMessage< AggregateMessageOrigin, xcm_executor::XcmExecutor<xcm_config::XcmConfig>, RuntimeCall, >, >; // Not really important what to choose here. Just something larger than the maximal number of channels. type MaxInboundSuspended = sp_core::ConstU32<1_000>; ``` The `InboundXcmpStatus` storage item was replaced by `InboundXcmpSuspended` since it now only tracks inbound queue suspension and no message indices anymore. Now only sends the most recent channel `Signals`, as all prio ones are out-dated anyway. ### Parachain System pallet For `DMP` messages instead of forwarding them to the `DMP` pallet, it now pushes them to the configured `DmpQueue`. The message processing which was triggered in `set_validation_data` is now being done by the MQ pallet `on_initialize`. XCMP messages are still handed off to the `XcmpMessageHandler` (XCMP-Queue pallet) - no change here. New config items for the parachain system pallet: ```rust /// Queues inbound downward messages for delayed processing. /// /// Analogous to the `XcmpQueue` of the XCMP queue pallet. type DmpQueue: EnqueueMessage<AggregateMessageOrigin>; ``` How to configure: ```rust /// Use the MQ pallet to store DMP messages for delayed processing. type DmpQueue = MessageQueue; ``` ## Message Flow The flow of messages on the parachain side. Messages come in from the left via the `Validation Data` and finally end up at the `Xcm Executor` on the right.  ## Further changes - Bumped the default suspension, drop and resume thresholds in `QueueConfigData::default()`. - `XcmpQueue::{suspend_xcm_execution, resume_xcm_execution}` errors when they would be a noop. - Properly validate the `QueueConfigData` before setting it. - Marked weight files as auto-generated so they wont auto-expand in the MR files view. - Move the `hypothetical` asserts to `frame_support` under the name `experimental_hypothetically` Questions: - [ ] What about the ugly `#[cfg(feature = \"runtime-benchmarks\")]` in the runtimes? Not sure how to best fix. Just having them like this makes tests fail that rely on the real message processor when the feature is enabled. - [ ] Need a good weight for `MessageQueueServiceWeight`. The scheduler already takes 80% so I put it to 10% but that is quite low. TODO: - [x] Remove c&p code after https://github.com/paritytech/polkadot/pull/6271 - [x] Use `HandleMessage` once it is public in Substrate - [x] fix `runtime-benchmarks` feature https://github.com/paritytech/polkadot/pull/6966 - [x] Benchmarks - [x] Tests - [ ] Migrate `InboundXcmpStatus` to `InboundXcmpSuspended` - [x] Possibly cleanup Migrations (DMP+XCMP) - [x] optional: create `TransformProcessMessageOrigin` in Substrate and replace `ProcessFromSibling` - [ ] Rerun weights on ref HW --------- Signed-off-by:
-
- Nov 01, 2023
-
-
Oliver Tale-Yazdi authored
Changes: - Change the fungible(s) logic to treat a self-transfer as No-OP (as long as all pre-checks pass). Note that the self-transfer case will not emit an event since no state was changed. --------- Signed-off-by: -
Serban Iorga authored
-
- Oct 24, 2023
-
-
Kian Paimani authored
closes https://github.com/paritytech/polkadot-sdk/issues/1882 ## Breaking Changes This PR introduces a new item to `pallet_balances::Config`: ```diff trait Config { ++ type RuntimeFreezeReasons; } ``` This value is only used to check it against `type MaxFreeze`. A similar check has been added for `MaxHolds` against `RuntimeHoldReasons`, which is already given to `pallet_balances`. In all contexts, you should pass the real `RuntimeFreezeReasons` generated by `construct_runtime` to `type RuntimeFreezeReasons`. Passing `()` would also work, but it would imply that the runtime uses no freezes at all. --------- Signed-off-by:
-
- Oct 20, 2023
-
-
Bastian Köcher authored
The `xcm` crate was renamed to `staging-xcm` to be able to publish it to crates.io as someone as squatted `xcm`. The problem with this rename is that the `TypeInfo` includes the crate name which ultimately lands in the metadata. The metadata is consumed by downstream users like `polkadot-js` or people building on top of `polkadot-js`. These people are using the entire `path` to find the type in the type registry. Thus, their code would break as the type path would now be [`staging_xcm`, `VersionedXcm`] instead of [`xcm`, `VersionedXcm`]. This pull request fixes this by renaming the path segment `staging_xcm` to `xcm`. This requires: https://github.com/paritytech/scale-info/pull/197 --------- Co-authored-by:
-
- Oct 18, 2023
-
-
Keith Yeung authored
Combination of paritytech/polkadot#7005, its addon PR paritytech/polkadot#7585 and its companion paritytech/cumulus#2433. This PR introduces a new XcmFeesToAccount struct which implements the `FeeManager` trait, and assigns this struct as the `FeeManager` in the XCM config for all runtimes. The struct simply deposits all fees handled by the XCM executor to a specified account. In all runtimes, the specified account is configured as the treasury account. XCM __delivery__ fees are now being introduced (unless the root origin is sending a message to a system parachain on behalf of the originating chain). # Note for reviewers Most file changes are tests that had to be modified to account for the new fees. Main changes are in: - cumulus/pallets/xcmp-queue/src/lib.rs <- To make it track the delivery fees exponential factor - polkadot/xcm/xcm-builder/src/fee_handling.rs <- Added. Has the FeeManager implementation - All runtime xcm_config files <- To add the FeeManager to the XCM configuration # Important note After this change, instructions that create and send a new XCM (Query*, Report*, ExportMessage, InitiateReserveWithdraw, InitiateTeleport, DepositReserveAsset, TransferReserveAsset, LockAsset and RequestUnlock) will require the corresponding origin account in the origin register to pay for transport delivery fees, and the onward message will fail to be sent if the origin account does not have the required amount. This delivery fee is on top of what we already collect as tx fees in pallet-xcm and XCM BuyExecution fees! Wallet UIs that want to expose the new delivery fee can do so using the formula: ``` delivery_fee_factor * (base_fee + encoded_msg_len * per_byte_fee) ``` where the delivery fee factor can be obtained from the corresponding pallet based on which transport you are using (UMP, HRMP or bridges), the base fee is a constant, the encoded message length from the message itself and the per byte fee is the same as the configured per byte fee for txs (i.e. `TransactionByteFee`). --------- Co-authored-by:
-
- Oct 17, 2023
-
-
Xiliang Chen authored
Partially addresses #1638 Still need a better solution to allow devs to have better control of this. --------- Co-authored-by:
-
Squirrel authored
Slightly less verbose use of fungible(s). --------- Co-authored-by: -
Branislav Kontur authored
## Summary This PR introduces several enhancements. The current implementation of `NetworkExportTable` lacks remote location filtering support beyond `NetworkId` lookup. To provide more control and granularity, it's essential to allow configuration for bridging to different consensus `NetworkId` while restricting access e.g. to particular remote parachains. Additionally, the `StartsWith` and `Equals` and `StartsWithExplicitGlobalConsensus` helper functions, which are in active use, are moved to the `xcm-builder` and `frame_support` modules for better code organization. Adds a new `LocationWithAssetFilters` filter to enable location-based and asset-related filtering. This filter is useful for configuring the `pallet_xcm` filter for [XcmTeleportFilter](https://github.com/paritytech/polkadot-sdk/blob/master/polkadot/xcm/pallet-xcm/src/lib.rs#L212) and [XcmReserveTransferFilter](https://github.com/paritytech/polkadot-sdk/blob/master/polkadot/xcm/pallet-xcm/src/lib.rs#L216) to restrict specific assets. Furthermore, the `BridgeMessage` fields are not accessible outside of `xcm-builder`, limiting the ability to create custom logic dependent on it. --------- Co-authored-by:
-
- Oct 12, 2023
-
-
Sam Elamin authored
This pr resolves https://github.com/paritytech/polkadot-sdk/issues/1428. *Added only to Kusama for now* I did raise it [here](https://github.com/polkadot-fellows/runtimes/pull/19) and we discussed creating a chopsticks test to run an end-to-end test however, to do that I will need a build agent/custom runner that is powerful enough to run the build I will be doing that separately as I still think having chopsticks test your runtime with each commit will be very powerful and extremely useful for the ecosystem For now I have used XCM simulator and replicated what the other reserve tests do --------- Co-authored-by:
Gavin Wood <[email protected]> Co-authored-by:
-
- Oct 01, 2023
-
-
Kian Paimani authored
Moving a few pallets to the latest and greatest `derive_impl` to give it a try. Part of #171 --------- Co-authored-by:
-
- Sep 20, 2023
-
-
joe petrowski authored
This PR filters calls from the Identity pallet from all Relay Chain runtimes as preparation to move the identity state and logic to a system parachain within each network. After this change is deployed to a runtime, no more changes such as adding new sub-identities will be possible. The frozen state will be part of the genesis state of the system chain. After the system chain launches, the pallet and all state will be removed from each Relay Chain. Applications and UIs that render display information from this pallet will need to read from the system chain when it launches.
-
- Sep 19, 2023
-
-
Xiliang Chen authored
The goal is to allow Fellowship on Collective chain to have a sovereign account on Polkadot so that we can add it as an identity registrar. This will allow Fellows origin to be able to provide judgements for Fellowship members. This currently allow any body on any parachain including non system parachains to have sovereign account. I cannot think of any reason why that may be an issue but let me know if I should change it to filter only system parachains. [This](https://gist.github.com/xlc/ec61bfa4e9f6d62da27d30141ad2c72b) is the testing script. Original PR: https://github.com/paritytech/polkadot/pull/7518
-
