# Description
- Link to issue: https://github.com/paritytech/polkadot-sdk/issues/3651

polkadot address: 19nSqFQorfF2HxD3oBzWM3oCh4SaCRKWt1yvmgaPYGCo71J

Preparation for https://github.com/paritytech/polkadot-sdk/pull/3935

Changes:
- Add some `default-features = false` for the case that a crate and that
dependency both support nostd builds.
- Shuffle files around of some benchmarking-only crates. These
conditionally disabled the `cfg_attr` for nostd and pulled in libstd.
Example [here](https://github.com/ggwpez/zepter/pull/95). The actual
logic is moved into a `inner.rs` to preserve nostd capability of the
crate in case the benchmarking feature is disabled.
- Add some `use sp_std::vec` where needed.
- Remove some `optional = true` in cases where it was not optional.
- Removed one superfluous `cfg_attr(not(feature = "std"), no_std..`.

All in all this should be logical no-op.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

This PR introduces changes enabling the transfer of coretime regions via
XCM.

TL;DR: There are two primary issues that are resolved in this PR:

1. The `mint` and `burn` functions were not implemented for coretime
regions. These operations are essential for moving assets to and from
the XCM holding register.
2. The transfer of non-fungible assets through XCM was previously
disallowed. This was due to incorrectly benchmarking non-fungible asset
transfers via XCM, which led to assigning it a weight of `Weight::Max`,
effectively preventing its execution.

### `mint_into` and `burn` implementation

This PR addresses the issue with cross-chain transferring regions back
to the Coretime chain. Remote reserve transfers are performed by
withdrawing and depositing the asset to and from the holding registry.
This requires the asset to support burning and minting functionality.

This PR adds burning and minting; however, they work a bit differently
than usual so that the associated region record is not lost when
burning. Instead of removing all the data, burning will set the owner of
the region to `None`, and when minting it back, it will set it to an
actual value. So, when cross-chain transferring, withdrawing into the
registry will remove the region from its original owner, and when
depositing it from the registry, it will set its owner to another
account

This was originally implemented in this PR: #3455, however we decided to
move all of it to this single PR
(https://github.com/paritytech/polkadot-sdk/pull/3455#discussion_r1547324892)

### Fixes made in this PR

- Update the `XcmReserveTransferFilter` on coretime chain since it is
meant as a reserve chain for coretime regions.
- Update the XCM benchmark to use `AssetTransactor` instead of assuming
`pallet-balances` for fungible transfers.
- Update the XCM benchmark to properly measure weight consumption for
nonfungible reserve asset transfers. ATM reserve transfers via the
extrinsic do not work since the weight for it is set to `Weight::max()`.

Closes: https://github.com/paritytech/polkadot-sdk/issues/865

---------

Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Dónal Murray <[email protected]>

Introduce types to define 1:1 balance conversion for different relative
asset ids/locations of native asset.

Examples:
native asset on Asset Hub presented as `VersionedLocatableAsset` type in
the context of Relay Chain is
```
{
  `location`: (0, Parachain(1000)),
  `asset_id`: (1, Here),
}
```
and it's balance should be converted 1:1 by implementations of
`ConversionToAssetBalance` trait.

---------

Co-authored-by: Branislav Kontur <[email protected]>

This PR mainly removes `xcm::v3` stuff from `assets-common` to make it
more generic and facilitate the transition to newer XCM versions. Some
of the implementations here used hard-coded `xcm::v3::Location`, but now
it's up to the runtime to configure according to its needs.

Additional/consequent changes:
- `penpal` runtime uses now `xcm::latest::Location` for `pallet_assets`
as `AssetId`, because we don't care about migrations here
- it pretty much simplify xcm-emulator integration tests, where we don't
need now a lots of boilerplate conversions:
      ```
      v3::Location::try_from(...).expect("conversion works")`
      ```
- xcm-emulator tests
- split macro `impl_assets_helpers_for_parachain` to the
`impl_assets_helpers_for_parachain` and
`impl_foreign_assets_helpers_for_parachain` (avoids using hard-coded
`xcm::v3::Location`)

# Description

Add `transfer_assets_using()` for transferring assets from local chain
to destination chain using explicit XCM transfer types such as:
- `TransferType::LocalReserve`: transfer assets to sovereign account of
destination chain and forward a notification XCM to `dest` to mint and
deposit reserve-based assets to `beneficiary`.
- `TransferType::DestinationReserve`: burn local assets and forward a
notification to `dest` chain to withdraw the reserve assets from this
chain's sovereign account and deposit them to `beneficiary`.
- `TransferType::RemoteReserve(reserve)`: burn local assets, forward XCM
to `reserve` chain to move reserves from this chain's SA to `dest`
chain's SA, and forward another XCM to `dest` to mint and deposit
reserve-based assets to `beneficiary`. Typically the remote `reserve` is
Asset Hub.
- `TransferType::Teleport`: burn local assets and forward XCM to `dest`
chain to mint/teleport assets and deposit them to `beneficiary`.

By default, an asset's reserve is its origin chain. But sometimes we may
want to explicitly use another chain as reserve (as long as allowed by
runtime `IsReserve` filter).

This is very helpful for transferring assets with multiple configured
reserves (such as Asset Hub ForeignAssets), when the transfer strictly
depends on the used reserve.

E.g. For transferring Foreign Assets over a bridge, Asset Hub must be
used as the reserve location.

# Example usage scenarios

## Transfer bridged ethereum ERC20-tokenX between ecosystem parachains.

ERC20-tokenX is registered on AssetHub as a ForeignAsset by the
Polkadot<>Ethereum bridge (Snowbridge). Its asset_id is something like
`(parents:2, (GlobalConsensus(Ethereum), Address(tokenX_contract)))`.
Its _original_ reserve is Ethereum (only we can't use Ethereum as a
reserve in local transfers); but, since tokenX is also registered on
AssetHub as a ForeignAsset, we can use AssetHub as a reserve.

With this PR we can transfer tokenX from ParaA to ParaB while using
AssetHub as a reserve.

## Transfer AssetHub ForeignAssets between parachains

AssetA created on ParaA but also registered as foreign asset on Asset
Hub. Can use AssetHub as a reserve.

And all of the above can be done while still controlling transfer type
for `fees` so mixing assets in same transfer is supported.

# Tests

Added integration tests for showcasing:
- transferring local (not bridged) assets from parachain over bridge
using local Asset Hub reserve,
- transferring foreign assets from parachain to Asset Hub,
- transferring foreign assets from Asset Hub to parachain,
- transferring foreign assets from parachain to parachain using local
Asset Hub reserve.

---------

Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: command-bot <>

Part of https://github.com/paritytech/polkadot-sdk/issues/226 
Related https://github.com/paritytech/polkadot-sdk/issues/1833

- Deprecate `CurrencyAdapter` and introduce `FungibleAdapter`
- Deprecate `ToStakingPot` and replace usage with `ResolveTo`
- Required creating a new `StakingPotAccountId` struct that implements
`TypedGet` for the staking pot account ID
- Update parachain common utils `DealWithFees`, `ToAuthor` and
`AssetsToBlockAuthor` implementations to use `fungible`
- Update runtime XCM Weight Traders to use `ResolveTo` instead of
`ToStakingPot`
- Update runtime Transaction Payment pallets to use `FungibleAdapter`
instead of `CurrencyAdapter`
- [x] Blocked by https://github.com/paritytech/polkadot-sdk/pull/1296,
needs the `Unbalanced::decrease_balance` fix

The XCM builder pattern lets you build xcms like so:

```rust
let xcm = Xcm::builder()
    .withdraw_asset((Parent, 100u128).into())
    .buy_execution((Parent, 1u128).into())
    .deposit_asset(All.into(), AccountId32 { id: [0u8; 32], network: None }.into())
    .build();
```

All the `.into()` become quite annoying to have to write.
I accepted `impl Into<T>` instead of `T` in the generated methods from
the macro.
Now the previous example can be simplified as follows:

```rust
let xcm = Xcm::builder()
    .withdraw_asset((Parent, 100u128))
    .buy_execution((Parent, 1u128))
    .deposit_asset(All, [0u8; 32])
    .build();
```

---------

Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Adrian Catangiu <[email protected]>

Added tests for XCM barriers: `AllowSubscriptions`, `WithUniqueTopic` and `TrailingSetTopicAsId` (#3955)

Closes: https://github.com/paritytech/polkadot-sdk/issues/1756

migrations: prevent accidentally using unversioned migrations instead of `VersionedMigration` (#3835)

closes #1324 

#### Problem
Currently, it is possible to accidentally use inner unversioned
migration instead of `VersionedMigration` since both implement
`OnRuntimeUpgrade`.

#### Solution

With this change, we make it clear that value of `Inner` is not intended
to be used directly. It is achieved by bounding `Inner` to new trait
`UncheckedOnRuntimeUpgrade`, which has the same interface (except
`unchecked_` prefix) as `OnRuntimeUpgrade`.

#### `try-runtime` functions

Since developers can implement `try-runtime` for `Inner` value in
`VersionedMigration` and have custom logic for it, I added the same
`try-runtime` functions to `UncheckedOnRuntimeUpgrade`. I looked for a
ways to not duplicate functions, but couldn't find anything that doesn't
significantly change the codebase. So I would appreciate If you have any
suggestions to improve this

cc @liamaharon

 @xlc 

polkadot address: 16FqwPZ8GRC5U5D4Fu7W33nA55ZXzXGWHwmbnE1eT6pxuqcT

---------

Co-authored-by: Liam Aharon <[email protected]>

Working towards migrating the `parity-bridges-common` repo inside
`polkadot-sdk`. This PR upgrades some dependencies in order to align
them with the versions used in `parity-bridges-common`

Related to
https://github.com/paritytech/parity-bridges-common/issues/2538

Fix "double-weights" for extrinsics, use only the ones benchmarked in
the runtime.

Deprecate extrinsics that don't specify WeightLimit, remove their usage
across the repo.

---------

Signed-off-by: Adrian Catangiu <[email protected]>
Co-authored-by: command-bot <>

This will make it possible to use remaining weight on idle for
processing enqueued messages.
More context here https://github.com/paritytech/polkadot-sdk/issues/3709

---------

Co-authored-by: Adrian Catangiu <[email protected]>

`execute` and `send` try to decode the xcm in the parameters before
reaching the filter line.
The new extrinsics decode only after the filter line.
These should be used instead of the old ones.

## TODO
- [x] Tests
- [x] Generate weights
- [x] Deprecation issue ->
https://github.com/paritytech/polkadot-sdk/issues/3771
- [x] PRDoc
- [x] Handle error in pallet-contracts

This would make writing XCMs in PJS Apps more difficult, but here's the
fix for that: https://github.com/polkadot-js/apps/pull/10350.
Already deployed! https://polkadot.js.org/apps/#/utilities/xcm

Supersedes https://github.com/paritytech/polkadot-sdk/pull/1798/

---------

Co-authored-by: PG Herveou <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Adrian Catangiu <[email protected]>

The PR provides API for obtaining:
- the weight required to execute an XCM message,
- a list of acceptable `AssetId`s for message execution payment,
- the cost of the weight in the specified acceptable `AssetId`.

It is meant to address an issue where one has to guess how much fee to
pay for execution. Also, at the moment, a client has to guess which
assets are acceptable for fee execution payment.
See the related issue
https://github.com/paritytech/polkadot-sdk/issues/690.
With this API, a client is supposed to query the list of the supported
asset IDs (in the XCM version format the client understands), weigh the
XCM program the client wants to execute and convert the weight into one
of the acceptable assets. Note that the client is supposed to know what
program will be executed on what chains. However, having a small
companion JS library for the pallet-xcm and xtokens should be enough to
determine what XCM programs will be executed and where (since these
pallets compose a known small set of programs).
```Rust
pub trait XcmPaymentApi<Call>
	where
		Call: Codec,
	{
		/// Returns a list of acceptable payment assets.
		///
		/// # Arguments
		///
		/// * `xcm_version`: Version.
		fn query_acceptable_payment_assets(xcm_version: Version) -> Result<Vec<VersionedAssetId>, Error>;
		/// Returns a weight needed to execute a XCM.
		///
		/// # Arguments
		///
		/// * `message`: `VersionedXcm`.
		fn query_xcm_weight(message: VersionedXcm<Call>) -> Result<Weight, Error>;
		/// Converts a weight into a fee for the specified `AssetId`.
		///
		/// # Arguments
		///
		/// * `weight`: convertible `Weight`.
		/// * `asset`: `VersionedAssetId`.
		fn query_weight_to_asset_fee(weight: Weight, asset: VersionedAssetId) -> Result<u128, Error>;
		/// Get delivery fees for sending a specific `message` to a `destination`.
		/// These always come in a specific asset, defined by the chain.
		///
		/// # Arguments
		/// * `message`: The message that'll be sent, necessary because most delivery fees are based on the
		///   size of the message.
		/// * `destination`: The destination to send the message to. Different destinations may use
		///   different senders that charge different fees.
		fn query_delivery_fees(destination: VersionedLocation, message: VersionedXcm<()>) -> Result<VersionedAssets, Error>;
	}
```
An
[example](https://gist.github.com/PraetorP/4bc323ff85401abe253897ba990ec29d)
of a client side code.

---------

Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Adrian Catangiu <[email protected]>
Co-authored-by: Daniel Shiposha <[email protected]>

**Update:** Pushed additional changes based on the review comments.

**This pull request fixes various spelling mistakes in this
repository.**

Most of the changes are contained in the first **3** commits:

- `Fix spelling mistakes in comments and docs`

- `Fix spelling mistakes in test names`

- `Fix spelling mistakes in error messages, panic messages, logs and
tracing`

Other source code spelling mistakes are separated into individual
commits for easier reviewing:

- `Fix the spelling of 'authority'`

- `Fix the spelling of 'REASONABLE_HEADERS_IN_JUSTIFICATION_ANCESTRY'`

- `Fix the spelling of 'prev_enqueud_messages'`

- `Fix the spelling of 'endpoint'`

- `Fix the spelling of 'children'`

- `Fix the spelling of 'PenpalSiblingSovereignAccount'`

- `Fix the spelling of 'PenpalSudoAccount'`

- `Fix the spelling of 'insufficient'`

- `Fix the spelling of 'PalletXcmExtrinsicsBenchmark'`

- `Fix the spelling of 'subtracted'`

- `Fix the spelling of 'CandidatePendingAvailability'`

- `Fix the spelling of 'exclusive'`

- `Fix the spelling of 'until'`

- `Fix the spelling of 'discriminator'`

- `Fix the spelling of 'nonexistent'`

- `Fix the spelling of 'subsystem'`

- `Fix the spelling of 'indices'`

- `Fix the spelling of 'committed'`

- `Fix the spelling of 'topology'`

- `Fix the spelling of 'response'`

- `Fix the spelling of 'beneficiary'`

- `Fix the spelling of 'formatted'`

- `Fix the spelling of 'UNKNOWN_PROOF_REQUEST'`

- `Fix the spelling of 'succeeded'`

- `Fix the spelling of 'reopened'`

- `Fix the spelling of 'proposer'`

- `Fix the spelling of 'InstantiationNonce'`

- `Fix the spelling of 'depositor'`

- `Fix the spelling of 'expiration'`

- `Fix the spelling of 'phantom'`

- `Fix the spelling of 'AggregatedKeyValue'`

- `Fix the spelling of 'randomness'`

- `Fix the spelling of 'defendant'`

- `Fix the spelling of 'AquaticMammal'`

- `Fix the spelling of 'transactions'`

- `Fix the spelling of 'PassingTracingSubscriber'`

- `Fix the spelling of 'TxSignaturePayload'`

- `Fix the spelling of 'versioning'`

- `Fix the spelling of 'descendant'`

- `Fix the spelling of 'overridden'`

- `Fix the spelling of 'network'`

Let me know if this structure is adequate.

**Note:** The usage of the words `Merkle`, `Merkelize`, `Merklization`,
`Merkelization`, `Merkleization`, is somewhat inconsistent but I left it
as it is.

~~**Note:** In some places the term `Receival` is used to refer to
message reception, IMO `Reception` is the correct word here, but I left
it as it is.~~

~~**Note:** In some places the term `Overlayed` is used instead of the
more acceptable version `Overlaid` but I also left it as it is.~~

~~**Note:** In some places the term `Applyable` is used instead of the
correct version `Applicable` but I also left it as it is.~~

**Note:** Some usage of British vs American english e.g. `judgement` vs
`judgment`, `initialise` vs `initialize`, `optimise` vs `optimize` etc.
are both present in different places, but I suppose that's
understandable given the number of contributors.

~~**Note:** There is a spelling mistake in `.github/CODEOWNERS` but it
triggers errors in CI when I make changes to it, so I left it as it
is.~~

Currently `transfer_assets` from pallet-xcm covers 4 main different
transfer types:
- `localReserve`
- `DestinationReserve`
- `Teleport`
- `RemoteReserve`

For the first three, the local execution and the remote message sending
are separated, and fees are deducted in pallet-xcm itself:
https://github.com/paritytech/polkadot-sdk/blob/3410dfb3

/polkadot/xcm/pallet-xcm/src/lib.rs#L1758.

For the 4th case `RemoteReserve`, pallet-xcm is still relying on the
xcm-executor itself to send the message (through the
`initiateReserveWithdraw` instruction). In this case, if delivery fees
need to be charged, it is not possible to do so because the
`jit_withdraw` mode has not being set.

This PR proposes to still use the `initiateReserveWithdraw` but
prepending a `setFeesMode { jit_withdraw: true }` to make sure delivery
fees can be paid.

A test-case is also added to present the aforementioned case

---------

Co-authored-by: Adrian Catangiu <[email protected]>

We do not need to make these traits generic over QueryId type, we can
just use the QueryId alias everywhere

Currently the xcm-executor returns an `Unimplemented` error if it
receives any HRMP-related instruction.
What I propose here, which is what we are currently doing in our forked
executor at polimec, is to introduce a trait implemented by the executor
which will handle those instructions.

This way, if parachains want to keep the default behavior, they just use
`()` and it will return unimplemented, but they can also implement their
own logic to establish HRMP channels with other chains in an automated
fashion, without requiring to go through governance.

Our implementation is mentioned in the [polkadot HRMP
docs](https://arc.net/l/quote/hduiivbu), and it was suggested to us to
submit a PR to add these changes to polkadot-sdk.

---------

Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: command-bot <>

Step in https://github.com/paritytech/polkadot-sdk/issues/171

This PR removes `as [disambiguation_path]` syntax from `derive_impl`
usage across the polkadot-sdk as introduced in
https://github.com/paritytech/polkadot-sdk/pull/3505

Revert "FRAME: Create `TransactionExtension` as a replacement for `SignedExtension` (#2280)" (#3665)

This PR reverts #2280 which introduced `TransactionExtension` to replace
`SignedExtension`.

As a result of the discussion
[here](https://github.com/paritytech/polkadot-sdk/pull/3623#issuecomment-1986789700),
the changes will be reverted for now with plans to reintroduce the
concept in the future.

---------

Signed-off-by: georgepisaltu <[email protected]>

Closes #2160

First part of [Extrinsic
Horizon](https://github.com/paritytech/polkadot-sdk/issues/2415)

Introduces a new trait `TransactionExtension` to replace
`SignedExtension`. Introduce the idea of transactions which obey the
runtime's extensions and have according Extension data (né Extra data)
yet do not have hard-coded signatures.

Deprecate the terminology of "Unsigned" when used for
transactions/extrinsics owing to there now being "proper" unsigned
transactions which obey the extension framework and "old-style" unsigned
which do not. Instead we have __*General*__ for the former and
__*Bare*__ for the latter. (Ultimately, the latter will be phased out as
a type of transaction, and Bare will only be used for Inherents.)

Types of extrinsic are now therefore:
- Bare (no hardcoded signature, no Extra data; used to be known as
"Unsigned")
- Bare transactions (deprecated): Gossiped, validated with
`ValidateUnsigned` (deprecated) and the `_bare_compat` bits of
`TransactionExtension` (deprecated).
  - Inherents: Not gossiped, validated with `ProvideInherent`.
- Extended (Extra data): Gossiped, validated via `TransactionExtension`.
  - Signed transactions (with a hardcoded signature).
  - General transactions (without a hardcoded signature).

`TransactionExtension` differs from `SignedExtension` because:
- A signature on the underlying transaction may validly not be present.
- It may alter the origin during validation.
- `pre_dispatch` is renamed to `prepare` and need not contain the checks
present in `validate`.
- `validate` and `prepare` is passed an `Origin` rather than a
`AccountId`.
- `validate` may pass arbitrary information into `prepare` via a new
user-specifiable type `Val`.
- `AdditionalSigned`/`additional_signed` is renamed to
`Implicit`/`implicit`. It is encoded *for the entire transaction* and
passed in to each extension as a new argument to `validate`. This
facilitates the ability of extensions to acts as underlying crypto.

There is a new `DispatchTransaction` trait which contains only default
function impls and is impl'ed for any `TransactionExtension` impler. It
provides several utility functions which reduce some of the tedium from
using `TransactionExtension` (indeed, none of its regular functions
should now need to be called directly).

Three transaction version discriminator ("versions") are now
permissible:
- 0b000000100: Bare (used to be called "Unsigned"): contains Signature
or Extra (extension data). After bare transactions are no longer
supported, this will strictly identify an Inherents only.
- 0b100000100: Old-school "Signed" Transaction: contains Signature and
Extra (extension data).
- 0b010000100: New-school "General" Transaction: contains Extra
(extension data), but no Signature.

For the New-school General Transaction, it becomes trivial for authors
to publish extensions to the mechanism for authorizing an Origin, e.g.
through new kinds of key-signing schemes, ZK proofs, pallet state,
mutations over pre-authenticated origins or any combination of the
above.

## Code Migration

### NOW: Getting it to build

Wrap your `SignedExtension`s in `AsTransactionExtension`. This should be
accompanied by renaming your aggregate type in line with the new
terminology. E.g. Before:

```rust
/// The SignedExtension to the basic transaction logic.
pub type SignedExtra = (
	/* snip */
	MySpecialSignedExtension,
);
/// Unchecked extrinsic type as expected by this runtime.
pub type UncheckedExtrinsic =
	generic::UncheckedExtrinsic<Address, RuntimeCall, Signature, SignedExtra>;
```

After:

```rust
/// The extension to the basic transaction logic.
pub type TxExtension = (
	/* snip */
	AsTransactionExtension<MySpecialSignedExtension>,
);
/// Unchecked extrinsic type as expected by this runtime.
pub type UncheckedExtrinsic =
	generic::UncheckedExtrinsic<Address, RuntimeCall, Signature, TxExtension>;
```

You'll also need to alter any transaction building logic to add a
`.into()` to make the conversion happen. E.g. Before:

```rust
fn construct_extrinsic(
		/* snip */
) -> UncheckedExtrinsic {
	let extra: SignedExtra = (
		/* snip */
		MySpecialSignedExtension::new(/* snip */),
	);
	let payload = SignedPayload::new(call.clone(), extra.clone()).unwrap();
	let signature = payload.using_encoded(|e| sender.sign(e));
	UncheckedExtrinsic::new_signed(
		/* snip */
		Signature::Sr25519(signature),
		extra,
	)
}
```

After:

```rust
fn construct_extrinsic(
		/* snip */
) -> UncheckedExtrinsic {
	let tx_ext: TxExtension = (
		/* snip */
		MySpecialSignedExtension::new(/* snip */).into(),
	);
	let payload = SignedPayload::new(call.clone(), tx_ext.clone()).unwrap();
	let signature = payload.using_encoded(|e| sender.sign(e));
	UncheckedExtrinsic::new_signed(
		/* snip */
		Signature::Sr25519(signature),
		tx_ext,
	)
}
```

### SOON: Migrating to `TransactionExtension`

Most `SignedExtension`s can be trivially converted to become a
`TransactionExtension`. There are a few things to know.

- Instead of a single trait like `SignedExtension`, you should now
implement two traits individually: `TransactionExtensionBase` and
`TransactionExtension`.
- Weights are now a thing and must be provided via the new function `fn
weight`.

#### `TransactionExtensionBase`

This trait takes care of anything which is not dependent on types
specific to your runtime, most notably `Call`.

- `AdditionalSigned`/`additional_signed` is renamed to
`Implicit`/`implicit`.
- Weight must be returned by implementing the `weight` function. If your
extension is associated with a pallet, you'll probably want to do this
via the pallet's existing benchmarking infrastructure.

#### `TransactionExtension`

Generally:
- `pre_dispatch` is now `prepare` and you *should not reexecute the
`validate` functionality in there*!
- You don't get an account ID any more; you get an origin instead. If
you need to presume an account ID, then you can use the trait function
`AsSystemOriginSigner::as_system_origin_signer`.
- You get an additional ticket, similar to `Pre`, called `Val`. This
defines data which is passed from `validate` into `prepare`. This is
important since you should not be duplicating logic from `validate` to
`prepare`, you need a way of passing your working from the former into
the latter. This is it.
- This trait takes two type parameters: `Call` and `Context`. `Call` is
the runtime call type which used to be an associated type; you can just
move it to become a type parameter for your trait impl. `Context` is not
currently used and you can safely implement over it as an unbounded
type.
- There's no `AccountId` associated type any more. Just remove it.

Regarding `validate`:
- You get three new parameters in `validate`; all can be ignored when
migrating from `SignedExtension`.
- `validate` returns a tuple on success; the second item in the tuple is
the new ticket type `Self::Val` which gets passed in to `prepare`. If
you use any information extracted during `validate` (off-chain and
on-chain, non-mutating) in `prepare` (on-chain, mutating) then you can
pass it through with this. For the tuple's last item, just return the
`origin` argument.

Regarding `prepare`:
- This is renamed from `pre_dispatch`, but there is one change:
- FUNCTIONALITY TO VALIDATE THE TRANSACTION NEED NOT BE DUPLICATED FROM
`validate`!!
- (This is different to `SignedExtension` which was required to run the
same checks in `pre_dispatch` as in `validate`.)

Regarding `post_dispatch`:
- Since there are no unsigned transactions handled by
`TransactionExtension`, `Pre` is always defined, so the first parameter
is `Self::Pre` rather than `Option<Self::Pre>`.

If you make use of `SignedExtension::validate_unsigned` or
`SignedExtension::pre_dispatch_unsigned`, then:
- Just use the regular versions of these functions instead.
- Have your logic execute in the case that the `origin` is `None`.
- Ensure your transaction creation logic creates a General Transaction
rather than a Bare Transaction; this means having to include all
`TransactionExtension`s' data.
- `ValidateUnsigned` can still be used (for now) if you need to be able
to construct transactions which contain none of the extension data,
however these will be phased out in stage 2 of the Transactions Horizon,
so you should consider moving to an extension-centric design.

## TODO

- [x] Introduce `CheckSignature` impl of `TransactionExtension` to
ensure it's possible to have crypto be done wholly in a
`TransactionExtension`.
- [x] Deprecate `SignedExtension` and move all uses in codebase to
`TransactionExtension`.
  - [x] `ChargeTransactionPayment`
  - [x] `DummyExtension`
  - [x] `ChargeAssetTxPayment` (asset-tx-payment)
  - [x] `ChargeAssetTxPayment` (asset-conversion-tx-payment)
  - [x] `CheckWeight`
  - [x] `CheckTxVersion`
  - [x] `CheckSpecVersion`
  - [x] `CheckNonce`
  - [x] `CheckNonZeroSender`
  - [x] `CheckMortality`
  - [x] `CheckGenesis`
  - [x] `CheckOnlySudoAccount`
  - [x] `WatchDummy`
  - [x] `PrevalidateAttests`
  - [x] `GenericSignedExtension`
  - [x] `SignedExtension` (chain-polkadot-bulletin)
  - [x] `RefundSignedExtensionAdapter`
- [x] Implement `fn weight` across the board.
- [ ] Go through all pre-existing extensions which assume an account
signer and explicitly handle the possibility of another kind of origin.
- [x] `CheckNonce` should probably succeed in the case of a non-account
origin.
- [x] `CheckNonZeroSender` should succeed in the case of a non-account
origin.
- [x] `ChargeTransactionPayment` and family should fail in the case of a
non-account origin.
  - [ ] 
- [x] Fix any broken tests.

---------

Signed-off-by: georgepisaltu <[email protected]>
Signed-off-by: Alexandru Vasile <[email protected]>
Signed-off-by: dependabot[bot] <[email protected]>
Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Signed-off-by: Alexandru Gheorghe <[email protected]>
Signed-off-by: Andrei Sandu <[email protected]>
Co-authored-by: Nikhil Gupta <[email protected]>
Co-authored-by: georgepisaltu <[email protected]>
Co-authored-by: Chevdor <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Maciej <[email protected]>
Co-authored-by: Javier Viola <[email protected]>
Co-authored-by: Marcin S. <[email protected]>
Co-authored-by: Tsvetomir Dimitrov <[email protected]>
Co-authored-by: Javier Bullrich <[email protected]>
Co-authored-by: Koute <[email protected]>
Co-authored-by: Adrian Catangiu <[email protected]>
Co-authored-by: Vladimir Istyufeev <[email protected]>
Co-authored-by: Ross Bulat <[email protected]>
Co-authored-by: Gonçalo Pestana <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Svyatoslav Nikolsky <[email protected]>
Co-authored-by: André Silva <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: s0me0ne-unkn0wn <[email protected]>
Co-authored-by: ordian <[email protected]>
Co-authored-by: Sebastian Kunert <[email protected]>
Co-authored-by: Aaro Altonen <[email protected]>
Co-authored-by: Dmitry Markin <[email protected]>
Co-authored-by: Alexandru Vasile <[email protected]>
Co-authored-by: Alexander Samusev <[email protected]>
Co-authored-by: Julian Eager <[email protected]>
Co-authored-by: Michal Kucharczyk <[email protected]>
Co-authored-by: Davide Galassi <[email protected]>
Co-authored-by: Dónal Murray <[email protected]>
Co-authored-by: yjh <[email protected]>
Co-authored-by: Tom Mi <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Will | Paradox | ParaNodes.io <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Joshy Orndorff <[email protected]>
Co-authored-by: Joshy Orndorff <[email protected]>
Co-authored-by: PG Herveou <[email protected]>
Co-authored-by: Alexander Theißen <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: Juan Girini <[email protected]>
Co-authored-by: bader y <[email protected]>
Co-authored-by: James Wilson <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: asynchronous rob <[email protected]>
Co-authored-by: Parth <[email protected]>
Co-authored-by: Andrew Jones <[email protected]>
Co-authored-by: Jonathan Udd <[email protected]>
Co-authored-by: Serban Iorga <[email protected]>
Co-authored-by: Egor_P <[email protected]>
Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: Evgeny Snitko <[email protected]>
Co-authored-by: Just van Stam <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: gupnik <[email protected]>
Co-authored-by: dzmitry-lahoda <[email protected]>
Co-authored-by: zhiqiangxu <[email protected]>
Co-authored-by: Nazar Mokrynskyi <[email protected]>
Co-authored-by: Anwesh <[email protected]>
Co-authored-by: cheme <[email protected]>
Co-authored-by: Sam Johnson <[email protected]>
Co-authored-by: kianenigma <[email protected]>
Co-authored-by: Jegor Sidorenko <[email protected]>
Co-authored-by: Muharem <[email protected]>
Co-authored-by: joepetrowski <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Gabriel Facco de Arruda <[email protected]>
Co-authored-by: Squirrel <[email protected]>
Co-authored-by: Andrei Sandu <[email protected]>
Co-authored-by: georgepisaltu <[email protected]>
Co-authored-by: command-bot <>

If an XCM execution fails or ends with leftover assets, these will be
trapped.
In order to claim them, a custom XCM has to be executed, with the
`ClaimAsset` instruction.
However, arbitrary XCM execution is not allowed everywhere yet and XCM
itself is still not easy enough to use for users out there with trapped
assets.
This new extrinsic in `pallet-xcm` will allow these users to easily
claim their assets, without concerning themselves with writing arbitrary
XCMs.

Part of fixing https://github.com/paritytech/polkadot-sdk/issues/3495

---------

Co-authored-by: command-bot <>
Co-authored-by: Adrian Catangiu <[email protected]>

## Problem
During the bumping of the `polkadot-fellows` repository to
`[email protected]`, I encountered a situation where the benchmarks
`teleport_assets` and `reserve_transfer_assets` in AssetHubKusama
started to fail. This issue arose due to a decreased ED balance for
AssetHubs introduced
[here](https://github.com/polkadot-fellows/runtimes/pull/158/files#diff-80668ff8e793b64f36a9a3ec512df5cbca4ad448c157a5d81abda1b15f35f1daR213),
and also because of a [missing CI
pipeline](https://github.com/polkadot-fellows/runtimes/issues/197) to
check the benchmarks, which went unnoticed.

These benchmarks expect the `caller` to have enough:
1. balance to transfer (BTT)
2. balance for paying delivery (BFPD).
 
So the initial balance was calculated as `ED * 100`, which seems
reasonable:
```
const ED_MULTIPLIER: u32 = 100;
let balance = existential_deposit.saturating_mul(ED_MULTIPLIER.into());`
```
The problem arises when the price for delivery is 100 times higher than
the existential deposit. In other words, when `ED * 100` does not cover
`BTT` + `BFPD`.

I check AHR/AHW/AHK/AHP and this problem has only AssetHubKusama
```
ED: 3333333
calculated price to parent delivery:  1031666634  (from xcm logs from the benchmark)
---

3333333 * 100 - BTT(3333333) - BFPD(1031666634) = −701666667
```
which results in the error;
```
2024-02-23 09:19:42 Unable to charge fee with error Module(ModuleError { index: 31, error: [17, 0, 0, 0], message: Some("FeesNotMet") })
Error: Input("Benchmark pallet_xcm::reserve_transfer_assets failed: FeesNotMet")
     
```

## Solution

The benchmarks `teleport_assets` and `reserve_transfer_assets` were
fixed by removing `ED * 100` and replacing it with `DeliveryHelper`
logic, which calculates the (almost real) price for delivery and sets it
along with the existential deposit as the initial balance for the
account used in the benchmark.


## TODO

- [ ] patch for 1.6 -
https://github.com/paritytech/polkadot-sdk/pull/3466
- [ ] patch for 1.7 -
https://github.com/paritytech/polkadot-sdk/pull/3465
- [ ] patch for 1.8 - TODO: PR

---------

Co-authored-by: Francisco Aguirre <[email protected]>

The `fee` should be calculated with the reanchored asset, otherwise it
could lead to a failure where the set aside fee ends up not being
enough.

@acatangiu



---------

Co-authored-by: Adrian Catangiu <[email protected]>

Lifting some more dependencies to the workspace. Just using the
most-often updated ones for now.
It can be reproduced locally.

```sh
# First you can check if there would be semver incompatible bumps (looks good in this case):
$ zepter transpose dependency lift-to-workspace --ignore-errors syn quote thiserror "regex:^serde.*"

# Then apply the changes:
$ zepter transpose dependency lift-to-workspace --version-resolver=highest syn quote thiserror "regex:^serde.*" --fix

# And format the changes:
$ taplo format --config .config/taplo.toml
```

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

## Xcm changes:
- Fix `pallet_xcm::execute`, move the logic into The `ExecuteController`
so it can be shared with anything that implement that trait.
- Make `ExecuteController::execute` retursn `DispatchErrorWithPostInfo`
instead of `DispatchError`, so that we don't charge the full
`max_weight` provided if the execution is incomplete (useful for
force_batch or contracts calls)
- Fix docstring for `pallet_xcm::execute`, to reflect the changes from
#2405
- Update the signature for `ExecuteController::execute`, we don't need
to return the `Outcome` anymore since we only care about
`Outcome::Complete`

## Contracts changes:

- Update host fn `xcm_exexute`, we don't need to write the `Outcome` to
the sandbox memory anymore. This was also not charged as well before so
it if fixes this too.
- One of the issue was that the dry_run of a contract that call
`xcm_execute` would exhaust the `gas_limit`.

This is because `XcmExecuteController::execute` takes a `max_weight`
argument, and since we don't want the user to specify it manually we
were passing everything left by pre-charghing
`ctx.ext.gas_meter().gas_left()`

- To fix it I added a `fn influence_lowest_limit` on the `Token` trait
and make it return false for `RuntimeCost::XcmExecute`.
- Got rid of the `RuntimeToken` indirection, we can just use
`RuntimeCost` directly.

---------

Co-authored-by: command-bot <>

Adds the coretime and on demand pallets to enable Coretime on Westend. 
In order for the migration to run successfully, we need the
Broker/Coretime parachain to be live.

TODO:
- [ ] Broker parachain is live
https://github.com/paritytech/polkadot-sdk/pull/3272

---------

Co-authored-by: command-bot <>
Co-authored-by: Bastian Köcher <[email protected]>

Bumps the known_good_semver group with 6 updates:

| Package | From | To |
| --- | --- | --- |
| [serde](https://github.com/serde-rs/serde) | `1.0.195` | `1.0.196` |
| [serde_json](https://github.com/serde-rs/json) | `1.0.111` | `1.0.113`
|
| [clap](https://github.com/clap-rs/clap) | `4.4.18` | `4.5.0` |
| [syn](https://github.com/dtolnay/syn) | `2.0.48` | `2.0.49` |
| [serde_yaml](https://github.com/dtolnay/serde-yaml) | `0.9.30` |
`0.9.31` |
| [serde_derive](https://github.com/serde-rs/serde) | `1.0.195` |
`1.0.196` |

Updates `serde` from 1.0.195 to 1.0.196
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/serde/releases">serde's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.196</h2>
<ul>
<li>Improve formatting of &quot;invalid type&quot; error messages
involving floats (<a
href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/serde/commit/ede9762a583c3cc3b87c10a53551828fad339525"><code>ede9762</code></a>
Release 1.0.196</li>
<li><a
href="https://github.com/serde-rs/serde/commit/d438c2d67bf30e3edab31c2272c4829c12cf4cb5"><code>d438c2d</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>
from dtolnay/decimalpoint</li>
<li><a
href="https://github.com/serde-rs/serde/commit/bef110b92a171ac568a47339f5bd97938a8c9da2"><code>bef110b</code></a>
Format Unexpected::Float with decimal point</li>
<li><a
href="https://github.com/serde-rs/serde/commit/b971ef11d1b53da7673e0c8199e87509c003c1a8"><code>b971ef1</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2681">#2681</a>
from dtolnay/workspacedeps</li>
<li><a
href="https://github.com/serde-rs/serde/commit/29d9f693996d199748136d5561a971ed68626724"><code>29d9f69</code></a>
Fix workspace.dependencies default-features future compat warning</li>
<li><a
href="https://github.com/serde-rs/serde/commit/aecb4083bde754155752f5d7d442b64eb7dc636f"><code>aecb408</code></a>
Sort workspace dependencies</li>
<li><a
href="https://github.com/serde-rs/serde/commit/1c675ab3a38e46df4e62465800970f8b20a2055d"><code>1c675ab</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2678">#2678</a>
from rodoufu/workspaceDependencies</li>
<li><a
href="https://github.com/serde-rs/serde/commit/dd619630a337139424725697ccd9a9f7596a2d3a"><code>dd61963</code></a>
Adding workspace dependencies</li>
<li><a
href="https://github.com/serde-rs/serde/commit/111803ab0768d010c606f2fc0d0add12750d5eef"><code>111803a</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2673">#2673</a>
from Sky9x/msrv-badge</li>
<li><a
href="https://github.com/serde-rs/serde/commit/0024f74f34fbbdc44a7b22457faebe36c5cbe7f8"><code>0024f74</code></a>
Use shields.io's MSRV badges</li>
<li>See full diff in <a
href="https://github.com/serde-rs/serde/compare/v1.0.195...v1.0.196">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_json` from 1.0.111 to 1.0.113
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/json/releases">serde_json's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.113</h2>
<ul>
<li>Add <code>swap_remove</code> and <code>shift_remove</code> methods
on Map (<a
href="https://redirect.github.com/serde-rs/json/issues/1109">#1109</a>)</li>
</ul>
<h2>v1.0.112</h2>
<ul>
<li>Improve formatting of &quot;invalid type&quot; error messages
involving floats (<a
href="https://redirect.github.com/serde-rs/json/issues/1107">#1107</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/json/commit/09d865b34b9701be52764dc9bf571b1a16e9d3dc"><code>09d865b</code></a>
Release 1.0.113</li>
<li><a
href="https://github.com/serde-rs/json/commit/5aeab4eaf69d7959f013f8081865c264d6c00551"><code>5aeab4e</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1109">#1109</a>
from serde-rs/remove</li>
<li><a
href="https://github.com/serde-rs/json/commit/ca3c2ca3696cab79b8b279be7569ee1647250f1e"><code>ca3c2ca</code></a>
Add swap_remove and shift_remove methods on Map</li>
<li><a
href="https://github.com/serde-rs/json/commit/7fece969e3b480ec620419d65c2aeb08776bebcb"><code>7fece96</code></a>
Release 1.0.112</li>
<li><a
href="https://github.com/serde-rs/json/commit/6a6d2bbd9e8b8bd72573b863f12a4ec991f33232"><code>6a6d2bb</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1107">#1107</a>
from serde-rs/unexpectedfloat</li>
<li><a
href="https://github.com/serde-rs/json/commit/83d7bad54ba5db3a44198d6df0ff2e81621683fa"><code>83d7bad</code></a>
Format f64 in error messages using ryu</li>
<li><a
href="https://github.com/serde-rs/json/commit/107c2d1c42817f0d71f07a4d5b0ea2f29dbce8b8"><code>107c2d1</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1106">#1106</a>
from serde-rs/invalidvalue</li>
<li><a
href="https://github.com/serde-rs/json/commit/62ca3e4c01c2e62cd5c2a32e9104f386e5ce7808"><code>62ca3e4</code></a>
Handle Unexpected::Unit in Error::invalid_value</li>
<li><a
href="https://github.com/serde-rs/json/commit/296fafb8f32e8442ef8e4d5725c15ffca726b288"><code>296fafb</code></a>
Factor out JSON-specific Display impl for serde::de::Unexpected</li>
<li><a
href="https://github.com/serde-rs/json/commit/e56cc696bd7c112e5dd4ccfa23d094c3a1c1c1ff"><code>e56cc69</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1105">#1105</a>
from keienWang/master</li>
<li>Additional commits viewable in <a
href="https://github.com/serde-rs/json/compare/v1.0.111...v1.0.113">compare
view</a></li>
</ul>
</details>
<br />

Updates `clap` from 4.4.18 to 4.5.0
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.5.0] - 2024-02-08</h2>
<h3>Compatibility</h3>
<ul>
<li>Update MSRV to 1.74</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/a751c5fe65cd33cb09e85ff3039b4fd0182cdb6e"><code>a751c5f</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/9ec6c942b81c370a8c14652e42295933244555ac"><code>9ec6c94</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/0735119775c2d27fef6b3c232cb9ef2fcbbd963f"><code>0735119</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/c4d3959506f5068f86ffb7ab34b622bd2da40dd8"><code>c4d3959</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5344">#5344</a>
from epage/encode</li>
<li><a
href="https://github.com/clap-rs/clap/commit/f750e577789e1dd34c6950d8c8fe16d1bfd1f49c"><code>f750e57</code></a>
fix(lex): Use new-ish OsStr API</li>
<li><a
href="https://github.com/clap-rs/clap/commit/1d9a554cdfddffcb92d197706b9720e2760cb443"><code>1d9a554</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5343">#5343</a>
from epage/msrv</li>
<li><a
href="https://github.com/clap-rs/clap/commit/4b45d361b1b96eb1f37b7d1db2684203ca828a94"><code>4b45d36</code></a>
chore: Update MSRV to 1.74</li>
<li><a
href="https://github.com/clap-rs/clap/commit/55b1f945157d4d0e480dea6c492e04d0b541088a"><code>55b1f94</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5342">#5342</a>
from epage/divan</li>
<li><a
href="https://github.com/clap-rs/clap/commit/ea77b98da3f321069ae136a241a2d266c2b28bd7"><code>ea77b98</code></a>
test(complete): Make it order independent</li>
<li><a
href="https://github.com/clap-rs/clap/commit/b0fea2bac60819bdb042e10c032817fded67f815"><code>b0fea2b</code></a>
test(bench): Switch to divan</li>
<li>Additional commits viewable in <a
href="https://github.com/clap-rs/clap/compare/v4.4.18...clap_complete-v4.5.0">compare
view</a></li>
</ul>
</details>
<br />

Updates `syn` from 2.0.48 to 2.0.49
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/syn/releases">syn's
releases</a>.</em></p>
<blockquote>
<h2>2.0.49</h2>
<ul>
<li>Improve error location when parsing from an empty string literal
using <code>LitStr::parse</code> (<a
href="https://redirect.github.com/dtolnay/syn/issues/1590">#1590</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/syn/commit/e64c0636042bcd8cf56f9e6c3e828a49cb434649"><code>e64c063</code></a>
Release 2.0.49</li>
<li><a
href="https://github.com/dtolnay/syn/commit/981359c5f46f25f3db42d1b341cc607f634688e7"><code>981359c</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1590">#1590</a>
from dtolnay/streof</li>
<li><a
href="https://github.com/dtolnay/syn/commit/51298d40a447b9e5b3cd8c898c2ea9d24b31cd6d"><code>51298d4</code></a>
Improve error location at eof in LitStr::parse</li>
<li><a
href="https://github.com/dtolnay/syn/commit/270c63384a9d891f65880a03a5a92f0bf4605bbf"><code>270c633</code></a>
Update test suite to nightly-2024-02-13</li>
<li><a
href="https://github.com/dtolnay/syn/commit/dc9cf16b9b0601d2d393d059c46a8f8e0220cc21"><code>dc9cf16</code></a>
Remove FilterAttrs trait when unused</li>
<li><a
href="https://github.com/dtolnay/syn/commit/7dcfac79eda716fa806d68cc0aa811f3be717dc0"><code>7dcfac7</code></a>
Ignore dead_code warning in test</li>
<li><a
href="https://github.com/dtolnay/syn/commit/98318441089f9a9bb596fc010ed14c3b593d4bda"><code>9831844</code></a>
Update signature of Emitter::emit_diagnostic in nightly-2024-02-07</li>
<li><a
href="https://github.com/dtolnay/syn/commit/9e8033f63da93dfb6a3e698449c6edff5e56727d"><code>9e8033f</code></a>
Update test suite to nightly-2024-02-07</li>
<li><a
href="https://github.com/dtolnay/syn/commit/cb3348cd94be50995054796facdfa055b6e0e9e8"><code>cb3348c</code></a>
Update test suite to nightly-2024-01-23</li>
<li><a
href="https://github.com/dtolnay/syn/commit/15b9dbcd67bc56f3da7d33bbede46f7380fc7164"><code>15b9dbc</code></a>
Update test suite to nightly-2024-01-19</li>
<li>Additional commits viewable in <a
href="https://github.com/dtolnay/syn/compare/2.0.48...2.0.49">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_yaml` from 0.9.30 to 0.9.31
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/serde-yaml/releases">serde_yaml's
releases</a>.</em></p>
<blockquote>
<h2>0.9.31</h2>
<ul>
<li>Add <code>swap_remove</code> and <code>shift_remove</code> methods
on Mapping (<a
href="https://redirect.github.com/dtolnay/serde-yaml/issues/408">#408</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/2a77483b23897115bdd69af32ae34d593268d555"><code>2a77483</code></a>
Release 0.9.31</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/d8d1a839cf42ef4627c66bebd743f5fecd24e3ed"><code>d8d1a83</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/serde-yaml/issues/408">#408</a>
from dtolnay/remove</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/f8a99a496836ccfa6c547af9136986d13011be98"><code>f8a99a4</code></a>
Add swap_remove and shift_remove methods on Mapping</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/8b26413e3307e39329dc68a96b065058aec38f9a"><code>8b26413</code></a>
Work around dead_code warning in tests</li>
<li>See full diff in <a
href="https://github.com/dtolnay/serde-yaml/compare/0.9.30...0.9.31">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_derive` from 1.0.195 to 1.0.196
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/serde/releases">serde_derive's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.196</h2>
<ul>
<li>Improve formatting of &quot;invalid type&quot; error messages
involving floats (<a
href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/serde/commit/ede9762a583c3cc3b87c10a53551828fad339525"><code>ede9762</code></a>
Release 1.0.196</li>
<li><a
href="https://github.com/serde-rs/serde/commit/d438c2d67bf30e3edab31c2272c4829c12cf4cb5"><code>d438c2d</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>
from dtolnay/decimalpoint</li>
<li><a
href="https://github.com/serde-rs/serde/commit/bef110b92a171ac568a47339f5bd97938a8c9da2"><code>bef110b</code></a>
Format Unexpected::Float with decimal point</li>
<li><a
href="https://github.com/serde-rs/serde/commit/b971ef11d1b53da7673e0c8199e87509c003c1a8"><code>b971ef1</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2681">#2681</a>
from dtolnay/workspacedeps</li>
<li><a
href="https://github.com/serde-rs/serde/commit/29d9f693996d199748136d5561a971ed68626724"><code>29d9f69</code></a>
Fix workspace.dependencies default-features future compat warning</li>
<li><a
href="https://github.com/serde-rs/serde/commit/aecb4083bde754155752f5d7d442b64eb7dc636f"><code>aecb408</code></a>
Sort workspace dependencies</li>
<li><a
href="https://github.com/serde-rs/serde/commit/1c675ab3a38e46df4e62465800970f8b20a2055d"><code>1c675ab</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2678">#2678</a>
from rodoufu/workspaceDependencies</li>
<li><a
href="https://github.com/serde-rs/serde/commit/dd619630a337139424725697ccd9a9f7596a2d3a"><code>dd61963</code></a>
Adding workspace dependencies</li>
<li><a
href="https://github.com/serde-rs/serde/commit/111803ab0768d010c606f2fc0d0add12750d5eef"><code>111803a</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2673">#2673</a>
from Sky9x/msrv-badge</li>
<li><a
href="https://github.com/serde-rs/serde/commit/0024f74f34fbbdc44a7b22457faebe36c5cbe7f8"><code>0024f74</code></a>
Use shields.io's MSRV badges</li>
<li>See full diff in <a
href="https://github.com/serde-rs/serde/compare/v1.0.195...v1.0.196">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

I found out during the cleanup of this deprecation message in the
`polkadot-fellows` repository that we deprecated `CurrencyAdapter`
without making the recommended changes.


## TODO
- [ ] fix `polkadot-fellows` bump to 1.6.0
https://github.com/polkadot-fellows/runtimes/pull/159

---------

Co-authored-by: Francisco Aguirre <[email protected]>

Changes (partial https://github.com/paritytech/polkadot-sdk/issues/994):
- Set log to `0.4.20` everywhere
- Lift `log` to the workspace

Starting with a simpler one after seeing
https://github.com/paritytech/polkadot-sdk/pull/2065 from @jsdw

.
This sets the `default-features` to `false` in the root and then
overwrites that in each create to its original value. This is necessary
since otherwise the `default` features are additive and its impossible
to disable them in the crate again once they are enabled in the
workspace.

I am using a tool to do this, so its mostly a test to see that it works
as expected.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

This adds `try_state()` and `integrity_test()` to the four runtimes of
the XCM-simulator fuzzer.

With this, we are able to stress-test [message-queue's
try_state](https://github.com/paritytech/polkadot-sdk/blob/7df1ae3b/substrate/frame/message-queue/src/lib.rs#L1245-L1347).

This also adds the `Transact` block-listing from #2424 to avoid
false-positives.

Thank you @ggwpez for the help with the runtime configurations.

Relates to: https://github.com/paritytech/polkadot-sdk/issues/3214

## TODO

- [ ] backport to the `1.7.0` release

This PR addresses two issues:
- It modifies `DepositAsset`'s asset filter from `All` to
`AllCounted(1)` to prevent potentially charging excessive weight/fees.
This adjustment avoids situations where fees could be calculated based
on the count of assets, as illustrated
[here](https://github.com/paritytech/polkadot-sdk/blob/master/cumulus/parachains/runtimes/bridge-hubs/bridge-hub-rococo/src/weights/xcm/mod.rs#L38-L46).
- It encapsulates `DepositAsset` with `SetAppendix` to ensure that
`fees` are not trapped in any case. For instance, this prevents issues
when `ExportXcm::validate` encounters an error during the processing of
`ExportMessage`.

Bumps [bounded-collections](https://github.com/paritytech/parity-common)
from 0.1.9 to 0.2.0.
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/paritytech/parity-common/commits/impl-rlp-v0.2.0">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=bounded-collections&package-manager=cargo&previous-version=0.1.9&new-version=0.2.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Liam Aharon <[email protected]>

This fix aims to solve an issue in Kusama that resulted in failed
reserve asset transfers.

During multi-hop XCMs, like reserve asset transfers where the reserve is
not the sender nor the destination, but a third remote chain, the origin
is not available to pay for delivery fees out of their account directly,
so delivery fees should be paid out of transferred assets.

This commit also adds an xcm-emulator regression test that validates
this scenario is now working.

Signed-off-by: Adrian Catangiu <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>

[frame] `#[pallet::composite_enum]` improved variant count handling + removed `pallet_balances`'s `MaxHolds` config (#2657)

I started this investigation/issue based on @liamaharon

 question
[here](https://github.com/paritytech/polkadot-sdk/pull/1801#discussion_r1410452499).

## Problem

The `pallet_balances` integrity test should correctly detect that the
runtime has correct distinct `HoldReasons` variant count. I assume the
same situation exists for RuntimeFreezeReason.

It is not a critical problem, if we set `MaxHolds` with a sufficiently
large value, everything should be ok. However, in this case, the
integrity_test check becomes less useful.

**Situation for "any" runtime:**
- `HoldReason` enums from different pallets:
```rust
        /// from pallet_nis
        #[pallet::composite_enum]
	pub enum HoldReason {
		NftReceipt,
	}

        /// from pallet_preimage
        #[pallet::composite_enum]
	pub enum HoldReason {
		Preimage,
	}

        // from pallet_state-trie-migration
        #[pallet::composite_enum]
	pub enum HoldReason {
		SlashForContinueMigrate,
		SlashForMigrateCustomTop,
		SlashForMigrateCustomChild,
	}
```

- generated `RuntimeHoldReason` enum looks like:
```rust
pub enum RuntimeHoldReason {

    #[codec(index = 32u8)]
    Preimage(pallet_preimage::HoldReason),

    #[codec(index = 38u8)]
    Nis(pallet_nis::HoldReason),

    #[codec(index = 42u8)]
    StateTrieMigration(pallet_state_trie_migration::HoldReason),
}
```

- composite enum `RuntimeHoldReason` variant count is detected as `3`
- we set `type MaxHolds = ConstU32<3>`
- `pallet_balances::integrity_test` is ok with `3`(at least 3)

However, the real problem can occur in a live runtime where some
functionality might stop working. This is due to a total of 5 distinct
hold reasons (for pallets with multi-instance support, it is even more),
and not all of them can be used because of an incorrect `MaxHolds`,
which is deemed acceptable according to the `integrity_test`:
  ```
  // pseudo-code - if we try to call all of these:

T::Currency::hold(&pallet_nis::HoldReason::NftReceipt.into(),
&nft_owner, deposit)?;
T::Currency::hold(&pallet_preimage::HoldReason::Preimage.into(),
&nft_owner, deposit)?;

T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForContinueMigrate.into(),
&nft_owner, deposit)?;

  // With `type MaxHolds = ConstU32<3>` these two will fail

T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomTop.into(),
&nft_owner, deposit)?;

T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomChild.into(),
&nft_owner, deposit)?;
  ```  


## Solutions

A macro `#[pallet::*]` expansion is extended of `VariantCount`
implementation for the `#[pallet::composite_enum]` enum type. This
expansion generates the `VariantCount` implementation for pallets'
`HoldReason`, `FreezeReason`, `LockId`, and `SlashReason`. Enum variants
must be plain enum values without fields to ensure a deterministic
count.

The composite runtime enum, `RuntimeHoldReason` and
`RuntimeFreezeReason`, now sets `VariantCount::VARIANT_COUNT` as the sum
of pallets' enum `VariantCount::VARIANT_COUNT`:
```rust
#[frame_support::pallet(dev_mode)]
mod module_single_instance {

	#[pallet::composite_enum]
	pub enum HoldReason {
		ModuleSingleInstanceReason1,
		ModuleSingleInstanceReason2,
	}
...
}

#[frame_support::pallet(dev_mode)]
mod module_multi_instance {

	#[pallet::composite_enum]
	pub enum HoldReason<I: 'static = ()> {
		ModuleMultiInstanceReason1,
		ModuleMultiInstanceReason2,
		ModuleMultiInstanceReason3,
	}
...
}


impl self::sp_api_hidden_includes_construct_runtime::hidden_include::traits::VariantCount
    for RuntimeHoldReason
{
    const VARIANT_COUNT: u32 = 0
        + module_single_instance::HoldReason::VARIANT_COUNT
        + module_multi_instance::HoldReason::<module_multi_instance::Instance1>::VARIANT_COUNT
        + module_multi_instance::HoldReason::<module_multi_instance::Instance2>::VARIANT_COUNT
        + module_multi_instance::HoldReason::<module_multi_instance::Instance3>::VARIANT_COUNT;
}
```

In addition, `MaxHolds` is removed (as suggested
[here](https://github.com/paritytech/polkadot-sdk/pull/2657#discussion_r1443324573))
from `pallet_balances`, and its `Holds` are now bounded to
`RuntimeHoldReason::VARIANT_COUNT`. Therefore, there is no need to let
the runtime specify `MaxHolds`.


## For reviewers

Relevant changes can be found here:
- `substrate/frame/support/procedural/src/lib.rs` 
-  `substrate/frame/support/procedural/src/pallet/parse/composite.rs`
-  `substrate/frame/support/procedural/src/pallet/expand/composite.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/composite_helper.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/hold_reason.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/freeze_reason.rs`
- `substrate/frame/support/src/traits/misc.rs`

And the rest of the files is just about removed `MaxHolds` from
`pallet_balances`

## Next steps

Do the same for `MaxFreezes`
https://github.com/paritytech/polkadot-sdk/issues/2997.

---------

Co-authored-by: command-bot <>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Dónal Murray <[email protected]>
Co-authored-by: gupnik <[email protected]>

Some more work regarding XCMv4. Two limits from v3 were not transferred
over, those are:
- The instructions limit
- The number of assets limit
Both of these are now in v4.

For some reason `AssetInstance` increased in size, don't know why CI
didn't catch that before.

---------

Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: command-bot <>

Continues the work of https://github.com/paritytech/polkadot/pull/7312.
`MultiLocation` was modified to implement serialize in no-std in that
PR, but not the assets types.
This PR does the same for assets, and this also allows to inject them in
pallets that require them in genesis.