## Motivation

`pallet-xcm` is the main user-facing interface for XCM functionality,
including assets manipulation functions like `teleportAssets()` and
`reserve_transfer_assets()` calls.

While `teleportAsset()` works both ways, `reserve_transfer_assets()`
works only for sending reserve-based assets to a remote destination and
beneficiary when the reserve is the _local chain_.

## Solution

This PR enhances `pallet_xcm::(limited_)reserve_withdraw_assets` to
support transfers when reserves are other chains.
This will allow complete, **bi-directional** reserve-based asset
transfers user stories using `pallet-xcm`.

Enables following scenarios:
- transferring assets with local reserve (was previously supported iff
asset used as fee also had local reserve - now it works in all cases),
- transferring assets with reserve on destination,
- transferring assets with reserve on remote/third-party chain (iff
assets and fees have same remote reserve),
- transferring assets with reserve different than the reserve of the
asset to be used as fees - meaning can be used to transfer random asset
with local/dest reserve while using DOT for fees on all involved chains,
even if DOT local/dest reserve doesn't match asset reserve,
- transferring assets with any type of local/dest reserve while using
fees which can be teleported between involved chains.

All of the above is done by pallet inner logic without the user having
to specify which scenario/reserves/teleports/etc. The correct scenario
and corresponding XCM programs are identified, and respectively, built
automatically based on runtime configuration of trusted teleporters and
trusted reserves.

#### Current limitations:
- while `fees` and "non-fee" `assets` CAN have different reserves (or
fees CAN be teleported), the remaining "non-fee" `assets` CANNOT, among
themselves, have different reserve locations (this is also implicitly
enforced by `MAX_ASSETS_FOR_TRANSFER=2`, but this can be safely
increased in the future).
- `fees` and "non-fee" `assets` CANNOT have **different remote**
reserves (this could also be supported in the future, but adds even more
complexity while possibly not being worth it - we'll see what the future
holds).

Fixes https://github.com/paritytech/polkadot-sdk/issues/1584
Fixes https://github.com/paritytech/polkadot-sdk/issues/2055

---------

Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Branislav Kontur <[email protected]>

Fixes https://github.com/paritytech/polkadot-sdk/issues/1725

This PR adds the following changes:
1. An attribute `pallet::feeless_if` that can be optionally attached to
a call like so:
```rust
#[pallet::feeless_if(|_origin: &OriginFor<T>, something: &u32| -> bool {
	*something == 0
})]
pub fn do_something(origin: OriginFor<T>, something: u32) -> DispatchResult {
     ....
}
```
The closure passed accepts references to arguments as specified in the
call fn. It returns a boolean that denotes the conditions required for
this call to be "feeless".

2. A signed extension `SkipCheckIfFeeless<T: SignedExtension>` that
wraps a transaction payment processor such as
`pallet_transaction_payment::ChargeTransactionPayment`. It checks for
all calls annotated with `pallet::feeless_if` to see if the conditions
are met. If so, the wrapped signed extension is not called, essentially
making the call feeless.

In order to use this, you can simply replace ...

Small PR that introduce a new crate that will host RISC-V & wasm
fixtures for testing pallet-contracts

The staging- rename commit was missing from the last PR for some reason.

This PR contains some fixes and cleanups for parachain nodes:

1. When using async backing, node no longer complains about being unable
to reach the prospective-parachain subsystem.
2. Parachain warp sync now informs users that the finalized para block
has been retrieved.
```
2023-11-08 13:24:42 [Parachain] 🎉 Received finalized parachain header #5747719 (0xa0aa…674b) from the relay chain.
```
3. When a user supplied an invalid `--relay-chain-rpc-url`, we were
crashing with a very verbose message. Removed the `expect` and improved
the error message.
```
2023-11-08 13:57:56 [Parachain] No valid RPC url found. Stopping RPC worker.
2023-11-08 13:57:56 [Parachain] Essential task `relay-chain-rpc-worker` failed. Shutting down service.
Error: Service(Application(WorkerCommunicationError("RPC worker channel closed. This can hint and connectivity issues with the supplied RPC endpoints. Message: oneshot canceled")))
```

Closes:
- #1383 
- Declared chains can be now be imported and reused in a different
crate.
- Chain declaration are now generic over a generic type `N` (the
Network)
- #1389
- Solved #1383, chains and networks declarations can be restructure to
avoid having to compile all chains when running integrations tests where
are not needed.
- Chains are now declared on its own crate (removed from
`integration-tests-common`)
- Networks are now declared on its own crate (removed from
`integration-tests-common`)
    - Integration tests will import only the relevant Network crate
- `integration-tests-common` is renamed to
`emulated-integration-tests-common`

All this is necessary to be able to implement what is described here:
https://github.com/paritytech/roadmap/issues/56#issuecomment-1777010553

---------

Co-authored-by: command-bot <>

The trie cache implementation was ignoring the `storage_root` when
setting up the value cache. The problem with this is that the value
cache works using `storage_keys` and these keys are not unique across
different tries. A block can actually have different tries (main trie
and multiple child tries). This pull request fixes the issue by not
ignoring the `storage_root` and returning an unique `value_cache` per
`storage_root`. It also adds a test for the seen bug and improves
documentation that this doesn't happen again.

`bridge-hub-westend-runtime` was added to cumulus/parachains, but wasn't
hooked up to xcm-emulator to run tests against it.

This commit addresses that ^.

Signed-off-by: Adrian Catangiu <[email protected]>

Added a proc macro to be able to write XCMs using the builder pattern.
This means we go from having to do this:

```rust
let message: Xcm<()> = Xcm(vec![
  WithdrawAsset(assets),
  BuyExecution { fees: asset, weight_limit: Unlimited },
  DepositAsset { assets, beneficiary },
]);
```

to this:

```rust
let message: Xcm<()> = Xcm::builder()
  .withdraw_asset(assets)
  .buy_execution(asset, Unlimited),
  .deposit_asset(assets, beneficiary)
  .build();
```

---------

Co-authored-by: Keith Yeung <[email protected]>
Co-authored-by: command-bot <>

**_PR migrated from https://github.com/paritytech/polkadot/pull/6782_** 

This PR will upgrade the network protocol to version 3 -> VStaging which
will later be renamed to V3. This version introduces a new kind of
assignment certificate that will be used for tranche0 assignments.
Instead of issuing/importing one tranche0 assignment per candidate,
there will be just one certificate per relay chain block per validator.
However, we will not be sending out the new assignment certificates,
yet. So everything should work exactly as before. Once the majority of
the validators have been upgraded to the new protocol version we will
enable the new certificates (starting at a specific relay chain block)
with a new client update.

There are still a few things that need to be done:

- [x] Use bitfield instead of Vec<CandidateIndex>:
https://github.com/paritytech/polkadot/pull/6802
  - [x] Fix existing approval-distribution and approval-voting tests
  - [x] Fix bitfield-distribution and statement-distribution tests
  - [x] Fix network bridge tests
  - [x] Implement todos in the code
  - [x] Add tests to cover new code
  - [x] Update metrics
  - [x] Remove the approval distribution aggression levels: TBD PR
  - [x] Parachains DB migration 
  - [x] Test network protocol upgrade on Versi
  - [x] Versi Load test
  - [x] Add Zombienet test
  - [x] Documentation updates
- [x] Fix for sending DistributeAssignment for each candidate claimed by
a v2 assignment (warning: Importing locally an already known assignment)
 - [x]  Fix AcceptedDuplicate
 - [x] Fix DB migration so that we can still keep old data.
 - [x] Final Versi burn in

---------

Signed-off-by: Andrei Sandu <[email protected]>
Signed-off-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>

This PR updates the version of `serde_json` to `1.0.108` throughout the
codebase.

This PR prepares chains specs for _native-runtime-free_  world.

This PR has following changes:
- `substrate`:
  - adds support for:
- JSON based `GenesisConfig` to `ChainSpec` allowing interaction with
runtime `GenesisBuilder` API.
- interacting with arbitrary runtime wasm blob to[
`chain-spec-builder`](https://github.com/paritytech/substrate/blob/3ef576eaeb3f42610e85daecc464961cf1295570/bin/utils/chain-spec-builder/src/lib.rs#L46)
command line util,
- removes
[`code`](https://github.com/paritytech/substrate/blob/3ef576eaeb3f42610e85daecc464961cf1295570/frame/system/src/lib.rs#L660)
from `system_pallet`
  - adds `code` to the `ChainSpec`
- deprecates
[`ChainSpec::from_genesis`](https://github.com/paritytech/substrate/blob/3ef576eaeb3f42610e85daecc464961cf1295570/client/chain-spec/src/chain_spec.rs#L263),
but also changes the signature of this method extending it with `code`
argument.
[`ChainSpec::builder()`](https://github.com/paritytech/substrate/blob/20bee680ed098be7239cf7a6b804cd4de267983e/client/chain-spec/src/chain_spec.rs#L507)
should be used instead.
- `polkadot`:
- all references to `RuntimeGenesisConfig` in `node/service` are
removed,
- all
`(kusama|polkadot|versi|rococo|wococo)_(staging|dev)_genesis_config`
functions now return the JSON patch for default runtime `GenesisConfig`,
  - `ChainSpecBuilder` is used, `ChainSpec::from_genesis` is removed,

- `cumulus`:
  - `ChainSpecBuilder` is used, `ChainSpec::from_genesis` is removed,
- _JSON_ patch configuration used instead of `RuntimeGenesisConfig
struct` in all chain specs.
  
---------

Co-authored-by: command-bot <>
Co-authored-by: Javier Viola <[email protected]>
Co-authored-by: Davide Galassi <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Kevin Krone <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

The `BlockBuilderProvider` was a trait that was defined in
`sc-block-builder`. The trait was implemented for `Client`. This
basically meant that you needed to import `sc-block-builder` any way to
have access to the block builder. So, this trait was not providing any
real value. This pull request is removing the said trait. Instead of the
trait it introduces a builder for creating a `BlockBuilder`. The builder
currently has the quite fabulous name `BlockBuilderBuilder` (I'm open to
any better name 😅

). The rest of the pull request is about
replacing the old trait with the new builder.

# Downstream code changes

If you used `new_block` or `new_block_at` before you now need to switch
it over to the new `BlockBuilderBuilder` pattern:

```rust
// `new` requires a type that implements `CallApiAt`. 
let mut block_builder = BlockBuilderBuilder::new(client)
                // Then you need to specify the hash of the parent block the block will be build on top of
		.on_parent_block(at)
                // The block builder also needs the block number of the parent block. 
                // Here it is fetched from the given `client` using the `HeaderBackend`
                // However, there also exists `with_parent_block_number` for directly passing the number
		.fetch_parent_block_number(client)
		.unwrap()
                // Enable proof recording if required. This call is optional.
		.enable_proof_recording()
                // Pass the digests. This call is optional.
                .with_inherent_digests(digests)
		.build()
		.expect("Creates new block builder");
```

---------

Co-authored-by: Sebastian Kunert <[email protected]>
Co-authored-by: command-bot <>

The check_hardware functions does not give us too much information as to
what is failing, so let's return the list of failed metrics, so that callers can print 
it.

This would make debugging easier, rather than try to guess which
dimension is actually failing.

Signed-off-by: Alexandru Gheorghe <[email protected]>

Right now governance could only control byte-fee component of Rococo <>
Westend message fees (paid at Asset Hubs). This PR changes it a bit:
1) governance now allowed to control both fee components - byte fee and
base fee;
2) base fee now includes cost of "default" delivery and confirmation
transactions, in addition to `ExportMessage` instruction cost.

(imported from https://github.com/paritytech/cumulus/pull/2157)

## Changes

This MR refactores the XCMP, Parachains System and DMP pallets to use
the [MessageQueue](https://github.com/paritytech/substrate/pull/12485)
for delayed execution of incoming messages. The DMP pallet is entirely
replaced by the MQ and thereby removed. This allows for PoV-bounded
execution and resolves a number of issues that stem from the current
work-around.

All System Parachains adopt this change.  
The most important changes are in `primitives/core/src/lib.rs`,
`parachains/common/src/process_xcm_message.rs`,
`pallets/parachain-system/src/lib.rs`, `pallets/xcmp-queue/src/lib.rs`
and the runtime configs.

### DMP Queue Pallet

The pallet got removed and its logic refactored into parachain-system.
Overweight message management can be done directly through the MQ
pallet.

Final undeployment migrations are provided by
`cumulus_pallet_dmp_queue::UndeployDmpQueue` and `DeleteDmpQueue` that
can be configured with an aux config trait like:

```rust
parameter_types! {
	pub const DmpQueuePalletName: &'static str = \"DmpQueue\" < CHANGE ME;
	pub const RelayOrigin: AggregateMessageOrigin = AggregateMessageOrigin::Parent;
}

impl cumulus_pallet_dmp_queue::MigrationConfig for Runtime {
	type PalletName = DmpQueuePalletName;
	type DmpHandler = frame_support::traits::EnqueueWithOrigin<MessageQueue, RelayOrigin>;
	type DbWeight = <Runtime as frame_system::Config>::DbWeight;
}

// And adding them to your Migrations tuple:
pub type Migrations = (
	...
	cumulus_pallet_dmp_queue::UndeployDmpQueue<Runtime>,
	cumulus_pallet_dmp_queue::DeleteDmpQueue<Runtime>,
);
```

### XCMP Queue pallet

Removed all dispatch queue functionality. Incoming XCMP messages are now
either: Immediately handled if they are Signals, enqueued into the MQ
pallet otherwise.

New config items for the XCMP queue pallet:
```rust
/// The actual queue implementation that retains the messages for later processing.
type XcmpQueue: EnqueueMessage<ParaId>;

/// How a XCM over HRMP from a sibling parachain should be processed.
type XcmpProcessor: ProcessMessage<Origin = ParaId>;

/// The maximal number of suspended XCMP channels at the same time.
#[pallet::constant]
type MaxInboundSuspended: Get<u32>;
```

How to configure those:

```rust
// Use the MessageQueue pallet to store messages for later processing. The `TransformOrigin` is needed since
// the MQ pallet itself operators on `AggregateMessageOrigin` but we want to enqueue `ParaId`s.
type XcmpQueue = TransformOrigin<MessageQueue, AggregateMessageOrigin, ParaId, ParaIdToSibling>;

// Process XCMP messages from siblings. This is type-safe to only accept `ParaId`s. They will be dispatched
// with origin `Junction::Sibling(…)`.
type XcmpProcessor = ProcessFromSibling<
	ProcessXcmMessage<
		AggregateMessageOrigin,
		xcm_executor::XcmExecutor<xcm_config::XcmConfig>,
		RuntimeCall,
	>,
>;

// Not really important what to choose here. Just something larger than the maximal number of channels.
type MaxInboundSuspended = sp_core::ConstU32<1_000>;
```

The `InboundXcmpStatus` storage item was replaced by
`InboundXcmpSuspended` since it now only tracks inbound queue suspension
and no message indices anymore.

Now only sends the most recent channel `Signals`, as all prio ones are
out-dated anyway.

### Parachain System pallet

For `DMP` messages instead of forwarding them to the `DMP` pallet, it
now pushes them to the configured `DmpQueue`. The message processing
which was triggered in `set_validation_data` is now being done by the MQ
pallet `on_initialize`.

XCMP messages are still handed off to the `XcmpMessageHandler`
(XCMP-Queue pallet) - no change here.

New config items for the parachain system pallet:
```rust
/// Queues inbound downward messages for delayed processing. 
///
/// Analogous to the `XcmpQueue` of the XCMP queue pallet.
type DmpQueue: EnqueueMessage<AggregateMessageOrigin>;
``` 

How to configure:
```rust
/// Use the MQ pallet to store DMP messages for delayed processing.
type DmpQueue = MessageQueue;
``` 

## Message Flow

The flow of messages on the parachain side. Messages come in from the
left via the `Validation Data` and finally end up at the `Xcm Executor`
on the right.

![Untitled
(1)](https://github.com/paritytech/cumulus/assets/10380170/6cf8b377-88c9-4aed-96df-baace266e04d)

## Further changes

- Bumped the default suspension, drop and resume thresholds in
`QueueConfigData::default()`.
- `XcmpQueue::{suspend_xcm_execution, resume_xcm_execution}` errors when
they would be a noop.
- Properly validate the `QueueConfigData` before setting it.
- Marked weight files as auto-generated so they wont auto-expand in the
MR files view.
- Move the `hypothetical` asserts to `frame_support` under the name
`experimental_hypothetically`

Questions:
- [ ] What about the ugly `#[cfg(feature = \"runtime-benchmarks\")]` in
the runtimes? Not sure how to best fix. Just having them like this makes
tests fail that rely on the real message processor when the feature is
enabled.
- [ ] Need a good weight for `MessageQueueServiceWeight`. The scheduler
already takes 80% so I put it to 10% but that is quite low.

TODO:
- [x] Remove c&p code after
https://github.com/paritytech/polkadot/pull/6271
- [x] Use `HandleMessage` once it is public in Substrate
- [x] fix `runtime-benchmarks` feature
https://github.com/paritytech/polkadot/pull/6966
- [x] Benchmarks
- [x] Tests
- [ ] Migrate `InboundXcmpStatus` to `InboundXcmpSuspended`
- [x] Possibly cleanup Migrations (DMP+XCMP)
- [x] optional: create `TransformProcessMessageOrigin` in Substrate and
replace `ProcessFromSibling`
- [ ] Rerun weights on ref HW

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: command-bot <>

Closes https://github.com/paritytech/polkadot-sdk/issues/2013

## Summary

Asset bridging support for AssetHub**Rococo** <-> AssetHub**Wococo** was
added [here](https://github.com/paritytech/polkadot-sdk/pull/1215), so
now we aim to bridge AssetHub**Rococo** and AssetHub**Westend**. (And
perhaps retire AssetHubWococo and the Wococo chains).

## Solution

**bridge-hub-westend-runtime**
- added new runtime as a copy of `bridge-hub-rococo-runtime`
- added support for bridging to `BridgeHubRococo`
- added tests and benchmarks

**bridge-hub-rococo-runtime**
- added support for bridging to `BridgeHubWestend`
- added tests and benchmarks
- internal refactoring by splitting bridge configuration per network,
e.g., `bridge_to_whatevernetwork_config.rs`.

**asset-hub-rococo-runtime**
- added support for asset bridging to `AssetHubWestend` (allows to
receive only WNDs)
- added new xcm router for `Westend`
- added tests and benchmarks

**asset-hub-westend-runtime**
- added support for asset bridging to `AssetHubRococo` (allows to
receive only ROCs)
- added new xcm router for `Rococo`
- added tests and benchmarks

## Deployment

All changes will be deployed as a part of
https://github.com/paritytech/polkadot-sdk/issues/1988.

## TODO

- [x] benchmarks for all pallet instances
- [x] integration tests
- [x] local run scripts


Relates to:
https://github.com/paritytech/parity-bridges-common/issues/2602
Relates to: https://github.com/paritytech/polkadot-sdk/issues/1988

---------

Co-authored-by: command-bot <>
Co-authored-by: Adrian Catangiu <[email protected]>
Co-authored-by: joe petrowski <[email protected]>

Co-authored-by: Marcin S <[email protected]>

helps https://github.com/paritytech/polkadot-sdk/issues/439.
closes https://github.com/paritytech/polkadot-sdk/issues/473.

PR link in the older substrate repository:
https://github.com/paritytech/substrate/pull/13498.

# Context
Rewards payout is processed today in a single block and limited to
`MaxNominatorRewardedPerValidator`. This number is currently 512 on both
Kusama and Polkadot.

This PR tries to scale the nominators payout to an unlimited count in a
multi-block fashion. Exposures are stored in pages, with each page
capped to a certain number (`MaxExposurePageSize`). Starting out, this
number would be the same as `MaxNominatorRewardedPerValidator`, but
eventually, this number can be lowered through new runtime upgrades to
limit the rewardeable nominators per dispatched call instruction.

The changes in the PR are backward compatible.

## How payouts would work like after this change
Staking exposes two calls, 1) the existing `payout_stakers` and 2)
`payout_stakers_by_page`.

### payout_stakers
This remains backward compatible with no signature change. If for a
given era a validator has multiple pages, they can call `payout_stakers`
multiple times. The pages are executed in an ascending sequence and the
runtime takes care of preventing double claims.

### payout_stakers_by_page
Very similar to `payout_stakers` but also accepts an extra param
`page_index`. An account can choose to payout rewards only for an
explicitly passed `page_index`.

**Lets look at an example scenario**
Given an active validator on Kusama had 1100 nominators,
`MaxExposurePageSize` set to 512 for Era e. In order to pay out rewards
to all nominators, the caller would need to call `payout_stakers` 3
times.

- `payout_stakers(origin, stash, e)` => will pay the first 512
nominators.
- `payout_stakers(origin, stash, e)` => will pay the second set of 512
nominators.
- `payout_stakers(origin, stash, e)` => will pay the last set of 76
nominators.
...
- `payout_stakers(origin, stash, e)` => calling it the 4th time would
return an error `InvalidPage`.

The above calls can also be replaced by `payout_stakers_by_page` and
passing a `page_index` explicitly.

## Commission note
Validator commission is paid out in chunks across all the pages where
each commission chunk is proportional to the total stake of the current
page. This implies higher the total stake of a page, higher will be the
commission. If all the pages of a validator's single era are paid out,
the sum of commission paid to the validator across all pages should be
equal to what the commission would have been if we had a non-paged
exposure.

### Migration Note
Strictly speaking, we did not need to bump our storage version since
there is no migration of storage in this PR. But it is still useful to
mark a storage upgrade for the following reasons:

- New storage items are introduced in this PR while some older storage
items are deprecated.
- For the next `HistoryDepth` eras, the exposure would be incrementally
migrated to its corresponding paged storage item.
- Runtimes using staking pallet would strictly need to wait at least
`HistoryDepth` eras with current upgraded version (14) for the migration
to complete. At some era `E` such that `E >
era_at_which_V14_gets_into_effect + HistoryDepth`, we will upgrade to
version X which will remove the deprecated storage items.
In other words, it is a strict requirement that E<sub>x</sub> -
E<sub>14</sub> > `HistoryDepth`, where
E<sub>x</sub> = Era at which deprecated storages are removed from
runtime,
E<sub>14</sub> = Era at which runtime is upgraded to version 14.
- For Polkadot and Kusama, there is a [tracker
ticket](https://github.com/paritytech/polkadot-sdk/issues/433) to clean
up the deprecated storage items.

### Storage Changes

#### Added
- ErasStakersOverview
- ClaimedRewards
- ErasStakersPaged

#### Deprecated
The following can be cleaned up after 84 eras which is tracked
[here](https://github.com/paritytech/polkadot-sdk/issues/433).

- ErasStakers.
- ErasStakersClipped.
- StakingLedger.claimed_rewards, renamed to
StakingLedger.legacy_claimed_rewards.

### Config Changes
- Renamed MaxNominatorRewardedPerValidator to MaxExposurePageSize.

### TODO
- [x] Tracker ticket for cleaning up the old code after 84 eras.
- [x] Add companion.
- [x] Redo benchmarks before merge.
- [x] Add Changelog for pallet_staking.
- [x] Pallet should be configurable to enable/disable paged rewards.
- [x] Commission payouts are distributed across pages.
- [x] Review documentation thoroughly.
- [x] Rename `MaxNominatorRewardedPerValidator` ->
`MaxExposurePageSize`.
- [x] NMap for `ErasStakersPaged`.
- [x] Deprecate ErasStakers.
- [x] Integrity tests.

### Followup issues
[Runtime api for deprecated ErasStakers storage
item](https://github.com/paritytech/polkadot-sdk/issues/426)

---------

Co-authored-by: Javier Viola <[email protected]>
Co-authored-by: Ross Bulat <[email protected]>
Co-authored-by: command-bot <>

This PR moves syncing-related code from `sc-network-common` to
`sc-network-sync`.

Unfortunately, some parts are tightly integrated with networking, so
they were left in `sc-network-common` for now:

1. `SyncMode` in `common/src/sync.rs` (used in `NetworkConfiguration`).
2. `BlockAnnouncesHandshake`, `BlockRequest`, `BlockResponse`, etc. in
`common/src/sync/message.rs` (used in `src/protocol.rs` and
`src/protocol/message.rs`).

More substantial refactoring is needed to decouple syncing and
networking completely, including getting rid of the hardcoded sync
protocol.

## Release notes

Move syncing-related code from `sc-network-common` to `sc-network-sync`.
Delete `ChainSync` trait as it's never used (the only implementation is
accessed directly from `SyncingEngine` and exposes a lot of public
methods that are not part of the trait). Some new trait(s) for syncing
will likely be introduced as part of Sync 2.0 refactoring to represent
syncing strategies.

Co-authored-by: Sergejs Kostjucenko <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

# Description

The `trigger_defensive` call has been added to the `root-testing`
pallet. The idea is to have this pallet running on `Rococo/Westend` and
use it to verify if the runtime monitoring works end-to-end.

To accomplish this, `trigger_defensive` dispatches an event when it is
called.

Closes #1953

# Checklist

- [x] My PR includes a detailed description as outlined in the
"Description" section above
- [ ] My PR follows the [labeling requirements](CONTRIBUTING.md#Process)
of this project (at minimum one label for `T`
  required)
- [ ] I have made corresponding changes to the documentation (if
applicable)
- [ ] I have added tests that prove my fix is effective or that my
feature works (if applicable)

You can remove the "Checklist" section once all have been checked. Thank
you for your contribution!

✄
-----------------------------------------------------------------------------

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

- Usage the new published
[arkworks-extensions](https://github.com/paritytech/arkworks-extensions)
crates.
  Hooks are internally defined to jump into the proper host functions.
- Conditional compilation of each curve (gated by feature with curve
name)
- Separation in smaller host functions sets, divided by curve (fits
nicely with prev point)

The change adds a test to show the failure scenario that caused #1812 to
be rolled back (more context:
https://github.com/paritytech/polkadot-sdk/issues/493#issuecomment-1772009924)

Summary of the scenario:
1. Node has finished downloading up to block 1000 from the peers, from
the canonical chain.
2. Peers are undergoing re-org around this time. One of the peers has
switched to a non-canonical chain, announces block 1001 from that chain
3. Node downloads 1001 from the peer, and tries to import which would
fail (as we don't have the parent block 1000 from the other chain)

---------

Co-authored-by: Dmitry Markin <[email protected]>

Switch from: 
https://crates.io/crates/tiny-bip39
to:
https://crates.io/crates/bip39

Required for: https://github.com/paritytech/polkadot-sdk/pull/2044

Currently the CLI `-h/--help` commad output is almost unreadable as (for
some commands) it:
- doesn't provide a short brief of what the command does.
- doesn't separate the options description in smaller paragraphs.
- doesn't use a smart wrap strategy for lines longer than the number of
columns in the terminal.

Follow some pics taken with a 100 cols wide term

## Short help (./node -h)

### Before


![20231028-174531-grim](https://github.com/paritytech/polkadot-sdk/assets/8143589/11b62c3c-dcd5-43f4-ac58-f1b299e3f4b9)

### After


![20231028-175041-grim](https://github.com/paritytech/polkadot-sdk/assets/8143589/dc08f6fd-b287-40fb-8b33-71a185922104)


## Long help (./node --help)

### Before


![20231028-175257-grim](https://github.com/paritytech/polkadot-sdk/assets/8143589/9ebdc0ae-54ee-4760-b873-a7e813523cb6)

### After


![20231028-175155-grim](https://github.com/paritytech/polkadot-sdk/assets/8143589/69cbe5cb-eb2f-46a5-8ebf-76c0cf8c4bad)

---------

Co-authored-by: command-bot <>

Updates `docify` to 0.2.6, which fixes a bug that was preventing nesting
`#[docify::export]` within sub-items of items that already have
`#[docify::export]` attached to them from working properly.

Release notes here:
https://github.com/sam0x17/docify/releases/tag/v0.2.6

cc @ggwpez @Kianenigma

### Original PR https://github.com/paritytech/substrate/pull/14137

This PR brings in the first version of the "_`frame` umbrella crate_".
This crate is intended to serve two purposes:

1. documentation
2. easier development with frame. Ideally, we want most users to be able
to build a frame-based pallet and runtime using just `frame` (plus
`scale-codec` and `scale-info`).

The crate is not finalized and is not yet intended for external use.
Therefore, the version is set to `0.0.1-dev`, this PR is `silent`, and
the entire crate is hidden behind the `experimental` flag. The main
intention in merging it early on is to be able to iterate on it in the
rest of
[`developer-hub`](https://github.com/paritytech/polkadot-sdk-docs/)
efforts.

The public API of the `frame` crate is at the moment as follows: 

```
pub mod frame
pub use frame::log
pub use frame::pallet
pub mod frame::arithmetic
pub use frame::arithmetic::<<sp_arithmetic::*>>
pub use frame::arithmetic::<<sp_arithmetic::traits::*>>
pub mod frame::deps
pub use frame::deps::codec
pub use frame::deps::frame_executive
pub use frame::deps::frame_support
pub use frame::deps::frame_system
pub use frame::deps::scale_info
pub use frame::deps::sp_api
pub use frame::deps::sp_arithmetic
pub use frame::deps::sp_block_builder
pub use frame::deps::sp_consensus_aura
pub use frame::deps::sp_consensus_grandpa
pub use frame::deps::sp_core
pub use frame::deps::sp_inherents
pub use frame::deps::sp_io
pub use frame::deps::sp_offchain
pub use frame::deps::sp_runtime
pub use frame::deps::sp_std
pub use frame::deps::sp_version
pub mod frame::derive
pub use frame::derive::CloneNoBound
pub use frame::derive::Debug
pub use frame::derive::Debug
pub use frame::derive::DebugNoBound
pub use frame::derive::Decode
pub use frame::derive::Decode
pub use frame::derive::DefaultNoBound
pub use frame::derive::Encode
pub use frame::derive::Encode
pub use frame::derive::EqNoBound
pub use frame::derive::PartialEqNoBound
pub use frame::derive::RuntimeDebug
pub use frame::derive::RuntimeDebugNoBound
pub use frame::derive::TypeInfo
pub use frame::derive::TypeInfo
pub mod frame::prelude
pub use frame::prelude::<<frame_support::pallet_prelude::*>>
pub use frame::prelude::<<frame_system::pallet_prelude::*>>
pub use frame::prelude::<<sp_std::prelude::*>>
pub use frame::prelude::CloneNoBound
pub use frame::prelude::Debug
pub use frame::prelude::Debug
pub use frame::prelude::DebugNoBound
pub use frame::prelude::Decode
pub use frame::prelude::Decode
pub use frame::prelude::DefaultNoBound
pub use frame::prelude::Encode
pub use frame::prelude::Encode
pub use frame::prelude::EqNoBound
pub use frame::prelude::PartialEqNoBound
pub use frame::prelude::RuntimeDebug
pub use frame::prelude::RuntimeDebugNoBound
pub use frame::prelude::TypeInfo
pub use frame::prelude::TypeInfo
pub use frame::prelude::frame_system
pub mod frame::primitives
pub use frame::primitives::BlakeTwo256
pub use frame::primitives::H160
pub use frame::primitives::H256
pub use frame::primitives::H512
pub use frame::primitives::Hash
pub use frame::primitives::Keccak256
pub use frame::primitives::U256
pub use frame::primitives::U512
pub mod frame::runtime
pub mod frame::runtime::apis
pub use frame::runtime::apis::<<frame_system_rpc_runtime_api::*>>
pub use frame::runtime::apis::<<sp_api::*>>
pub use frame::runtime::apis::<<sp_block_builder::*>>
pub use frame::runtime::apis::<<sp_consensus_aura::*>>
pub use frame::runtime::apis::<<sp_consensus_grandpa::*>>
pub use frame::runtime::apis::<<sp_offchain::*>>
pub use frame::runtime::apis::<<sp_session::runtime_api::*>>
pub use frame::runtime::apis::<<sp_transaction_pool::runtime_api::*>>
pub use frame::runtime::apis::ApplyExtrinsicResult
pub use frame::runtime::apis::CheckInherentsResult
pub use frame::runtime::apis::InherentData
pub use frame::runtime::apis::OpaqueMetadata
pub use frame::runtime::apis::impl_runtime_apis
pub use frame::runtime::apis::sp_api
pub mod frame::runtime::prelude
pub use frame::runtime::prelude::<<frame_executive::*>>
pub use frame::runtime::prelude::ConstBool
pub use frame::runtime::prelude::ConstI128
pub use frame::runtime::prelude::ConstI16
pub use frame::runtime::prelude::ConstI32
pub use frame::runtime::prelude::ConstI64
pub use frame::runtime::prelude::ConstI8
pub use frame::runtime::prelude::ConstU128
pub use frame::runtime::prelude::ConstU16
pub use frame::runtime::prelude::ConstU32
pub use frame::runtime::prelude::ConstU64
pub use frame::runtime::prelude::ConstU8
pub use frame::runtime::prelude::NativeVersion
pub use frame::runtime::prelude::RuntimeVersion
pub use frame::runtime::prelude::construct_runtime
pub use frame::runtime::prelude::create_runtime_str
pub use frame::runtime::prelude::derive_impl
pub use frame::runtime::prelude::frame_support
pub use frame::runtime::prelude::ord_parameter_types
pub use frame::runtime::prelude::parameter_types
pub use frame::runtime::prelude::runtime_version
pub mod frame::runtime::testing_prelude
pub use frame::runtime::testing_prelude::BuildStorage
pub use frame::runtime::testing_prelude::Storage
pub mod frame::runtime::types_common
pub type frame::runtime::types_common::AccountId = <<frame::runtime::types_common::Signature as sp_runtime::traits::Verify>::Signer as sp_runtime::traits::IdentifyAccount>::AccountId
pub type frame::runtime::types_common::BlockNumber = u32
pub type frame::runtime::types_common::BlockOf<T, Extra> = sp_runtime::generic::block::Block<sp_runtime::generic::header::Header<frame::runtime::types_common::BlockNumber, sp_runtime::traits::BlakeTwo256>, sp_runtime::generic::unchecked_extrinsic::UncheckedExtrinsic<sp_runtime::multiaddress::MultiAddress<frame::runtime::types_common::AccountId, ()>, <T as frame_system::pallet::Config>::RuntimeCall, frame::runtime::types_common::Signature, Extra>>
pub type frame::runtime::types_common::OpaqueBlock = sp_runtime::generic::block::Block<sp_runtime::generic::header::Header<frame::runtime::types_common::BlockNumber, sp_runtime::traits::BlakeTwo256>, sp_runtime::OpaqueExtrinsic>
pub type frame::runtime::types_common::Signature = sp_runtime::MultiSignature
pub type frame::runtime::types_common::SystemSignedExtensionsOf<T> = (frame_system::extensions::check_non_zero_sender::CheckNonZeroSender<T>, frame_system::extensions::check_spec_version::CheckSpecVersion<T>, frame_system::extensions::check_tx_version::CheckTxVersion<T>, frame_system::extensions::check_genesis::CheckGenesis<T>, frame_system::extensions::check_mortality::CheckMortality<T>, frame_system::extensions::check_nonce::CheckNonce<T>, frame_system::extensions::check_weight::CheckWeight<T>)
pub mod frame::testing_prelude
pub use frame::testing_prelude::<<frame_executive::*>>
pub use frame::testing_prelude::<<frame_system::mocking::*>>
pub use frame::testing_prelude::BuildStorage
pub use frame::testing_prelude::ConstBool
pub use frame::testing_prelude::ConstI128
pub use frame::testing_prelude::ConstI16
pub use frame::testing_prelude::ConstI32
pub use frame::testing_prelude::ConstI64
pub use frame::testing_prelude::ConstI8
pub use frame::testing_prelude::ConstU128
pub use frame::testing_prelude::ConstU16
pub use frame::testing_prelude::ConstU32
pub use frame::testing_prelude::ConstU64
pub use frame::testing_prelude::ConstU8
pub use frame::testing_prelude::NativeVersion
pub use frame::testing_prelude::RuntimeVersion
pub use frame::testing_prelude::Storage
pub use frame::testing_prelude::TestState
pub use frame::testing_prelude::assert_err
pub use frame::testing_prelude::assert_err_ignore_postinfo
pub use frame::testing_prelude::assert_error_encoded_size
pub use frame::testing_prelude::assert_noop
pub use frame::testing_prelude::assert_ok
pub use frame::testing_prelude::assert_storage_noop
pub use frame::testing_prelude::construct_runtime
pub use frame::testing_prelude::create_runtime_str
pub use frame::testing_prelude::derive_impl
pub use frame::testing_prelude::frame_support
pub use frame::testing_prelude::frame_system
pub use frame::testing_prelude::if_std
pub use frame::testing_prelude::ord_parameter_types
pub use frame::testing_prelude::parameter_types
pub use frame::testing_prelude::runtime_version
pub use frame::testing_prelude::storage_alias
pub mod frame::traits
pub use frame::traits::<<frame_support::traits::*>>
pub use frame::traits::<<sp_runtime::traits::*>>
```

---

The road to full stabilization is

- [ ] https://github.com/paritytech/polkadot-sdk/issues/127
- [ ] have a more intentional version bump, as opposed to the current bi
weekly force-major-bump
- [ ] revise the internal API of `frame`, especially what goes into the
`prelude`s.
- [ ] migrate all internal pallets and runtime to use `frame`

---------

Co-authored-by: kianenigma <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>

Updates `docify` to 0.2.5, which fixes some indentation bugs and adds
the new `#[docify::export_content]` attribute which can be used like
regular `#[docify::export]` but will only export the _underlying
contents_ of the item it is attached to, if applicable (otherwise it
just behaves exactly like `#[docify::export]`).

Release notes here:
https://github.com/sam0x17/docify/releases/tag/v0.2.5

cc @Kianenigma

This PR does not make any functional changes to the code. Rather, it
restructures the dependency graph.

Before this PR, the crate `polkadot-parachain-primitives` depended
directly on the crate `frame-support`. This is wrong in principal
because a parachain does not necessarily have anything to do with frame.

This dependency was only for the `Weight` type which was just a
re-export from `sp-weights` anyway. So this PR changes the dependency to
be directly on the much lighter `sp-weights`.

---------

Co-authored-by: Joshy Orndorff <[email protected]>
Co-authored-by: command-bot <>

Just keeping wasm-opt up to date.

I don't see anything in the [binaryen
changelog](https://github.com/WebAssembly/binaryen/blob/main/CHANGELOG.md)
that should affect substrate.

This release includes dwarf passes that were accidentally omitted from
previous versions of the wasm-opt crate. I suspect this will not affect
substrate as their omission hasn't been noticed until recently.

Fixes #768.

## Problem

This PR addresses the issue with testnet AssetHub builds, which was
discovered during the execution of `bot bench`.

https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4038738
```
     Compiling asset-hub-rococo-runtime-wasm v1.0.0 (/builds/parity/mirrors/polkadot-sdk/target/production/wbuild/asset-hub-rococo-runtime)
  warning: Linking globals named 'Core_version': symbol multiply defined!
  error: failed to load bitcode of module "rococo_runtime-8799ee884447805a.rococo_runtime.0bc572b8-cgu.0.rcgu.o": 
  warning: `asset-hub-rococo-runtime-wasm` (lib) generated 1 warning
  error: could not compile `asset-hub-rococo-runtime-wasm` (lib) due to previous error; 1 warning emitted
```

https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4038739
```
Compiling asset-hub-westend-runtime-wasm v1.0.0 (/builds/parity/mirrors/polkadot-sdk/target/production/wbuild/asset-hub-westend-runtime)
  warning: Linking globals named 'Core_version': symbol multiply defined!
  error: failed to load bitcode of module "westend_runtime-86d7844430f97d5c.westend_runtime.b7678d03-cgu.0.rcgu.o": 
  warning: `asset-hub-westend-runtime-wasm` (lib) generated 1 warning
  error: could not compile `asset-hub-westend-runtime-wasm` (lib) due to previous error; 1 warning emitted
```

## Solution

- Removed dependencies on `rococo-runtime` and `westend-runtime`
introduced by [this
PR](https://github.com/paritytech/polkadot-sdk/pull/1234/files#diff-a86375df98e04ca3cce1ea35c40257a222e2d5087f5f528ff33307678b78dc2dR534-R550).
- Replaced `<rococo_runtime::Treasury as PalletInfoAccess>::index()`
with `rococo_runtime_constants::TREASURY_PALLET_ID`.
- Added `check_treasury_pallet_id` to the relay runtimes to ensure that
the constant is aligned with the pallet id.
- Added "Rococo Treasury" to the waived locations (that will not be
charged fees in the executor) for `BridgeHubRococo` (to be aligned with
AssetHubs).

## References

[Full element discussion
here](https://matrix.to/#/!JUeaZUiYbdrvzvtwSL:parity.io/$2PnjYMsWRjR7M3oOfGuRI0XkjdoqJLtRcAPVcDLuLVg?via=parity.io&via=web3.foundation).

---------

Co-authored-by: command-bot <>

Changes the maximum instances count for `wasmtime` to `64`. It also
allows to only pass in maximum `32` for `--max-runtime-instances` as
`256` was way too big. With `64` instances in total and `32` that can be
configured in maximum, there should be enough space to accommodate for
extra instances that are may required to be allocated adhoc.

---------

Co-authored-by: Koute <[email protected]>

Bumps [aes-gcm](https://github.com/RustCrypto/AEADs) from 0.10.2 to
0.10.3.
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/RustCrypto/AEADs/commit/7e82b01cd4901f6a35b5153536f11b87f5e4e622"><code>7e82b01</code></a>
aes-gcm v0.10.3 (<a
href="https://redirect.github.com/RustCrypto/AEADs/issues/552">#552</a>)</li>
<li><a
href="https://github.com/RustCrypto/AEADs/commit/b587b27270cc300d39c496a1ab06be80d72ac107"><code>b587b27</code></a>
aes-gcm: avoid exposing plaintext on tag verification failure (<a
href="https://redirect.github.com/RustCrypto/AEADs/issues/551">#551</a>)</li>
<li><a
href="https://github.com/RustCrypto/AEADs/commit/2209bcaa9edc65e9a60498e7ece5b50e66f32ebf"><code>2209bca</code></a>
build(deps): bump actions/checkout from 3 to 4 (<a
href="https://redirect.github.com/RustCrypto/AEADs/issues/548">#548</a>)</li>
<li><a
href="https://github.com/RustCrypto/AEADs/commit/035ec25362886735a0f44098f85ba0501a9b4038"><code>035ec25</code></a>
build(deps): bump ascon from 0.3.1 to 0.4.0 (<a
href="https://redirect.github.com/RustCrypto/AEADs/issues/545">#545</a>)</li>
<li><a
href="https://github.com/RustCrypto/AEADs/commit/e94ba5ab9fb2c7f3a18c92fb9dc8df14ac36f06b"><code>e94ba5a</code></a>
xsalsa20poly1305: remove source code (<a
href="https://redirect.github.com/RustCrypto/AEADs/issues/543">#543</a>)</li>
<li><a
href="https://github.com/RustCrypto/AEADs/commit/31240c1285144aeabef3e80eb9a1b4137dc2b43f"><code>31240c1</code></a>
Update Cargo.lock</li>
<li><a
href="https://github.com/RustCrypto/AEADs/commit/40240c4a852df21048830de4eed4782c0fbddaef"><code>40240c4</code></a>
Update Cargo.lock</li>
<li><a
href="https://github.com/RustCrypto/AEADs/commit/be4ea6fd3bcc1c8a5a23974a43e0fc35104d8cba"><code>be4ea6f</code></a>
Update Cargo.lock</li>
<li><a
href="https://github.com/RustCrypto/AEADs/commit/2aef39e90d39c247cc89ccc31628468c9a9f60de"><code>2aef39e</code></a>
Update Clippy version (<a
href="https://redirect.github.com/RustCrypto/AEADs/issues/534">#534</a>)</li>
<li><a
href="https://github.com/RustCrypto/AEADs/commit/50710da0cbd47a4614b6d37119877f206c207e95"><code>50710da</code></a>
Update Cargo.lock</li>
<li>Additional commits viewable in <a
href="https://github.com/RustCrypto/AEADs/compare/aes-gcm-v0.10.2...aes-gcm-v0.10.3">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=aes-gcm&package-manager=cargo&previous-version=0.10.2&new-version=0.10.3)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
You can disable automated security fix PRs for this repo from the
[Security Alerts
page](https://github.com/paritytech/polkadot-sdk/network/alerts).

</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>