Closes: https://github.com/paritytech/polkadot-sdk/issues/6585

Removing the `require_weight_at_most` parameter in V5 Transact had only
one problem. Converting a message from V5 to V4 to send to chains that
didn't upgrade yet. The conversion would not know what weight to give to
the Transact, since V4 and below require it.

To fix this, I added back the weight in the form of an `Option<Weight>`
called `fallback_max_weight`. This can be set to `None` if you don't
intend to deal with a chain that hasn't upgraded yet. If you set it to
`Some(_)`, the behaviour is the same. The plan is to totally remove this
in V6 since there will be a good conversion path from V6 to V5.

---------

Co-authored-by: GitHub Action <action@github.com>
Co-authored-by: Adrian Catangiu <adrian@parity.io>

Fix adds release environment to the backport job, so that token could be
properly generated

We were trapping the host context in case a sub call was exhausting the
storage deposit limit set for this sub call. This prevents the caller
from handling this error. In this PR we added a new error code that is
returned when either gas or storage deposit limit is exhausted by the
sub call.

We also remove the longer used `NotCallable` error. No longer used
because this is no longer an error: It will just be a balance transfer.

We also make `set_code_hash` infallible to be consistent with other host
functions which just trap on any error condition.

---------

Co-authored-by: GitHub Action <action@github.com>

Re-enable zombienet test for `solochain`.
Thx!

This PR ensures that substrate always reports discarded items as zero.
This is needed to align with the rpc-v2 spec

Closes: https://github.com/paritytech/polkadot-sdk/issues/6683


cc @paritytech/subxt-team

---------

Signed-off-by: Alexandru Vasile <alexandru.vasile@parity.io>
Co-authored-by: GitHub Action <action@github.com>

# Description
These changes should enhance the quality of benchmark results by
excluding worker initialization time from the measurements and reducing
the overall duration of the benchmarks.

### Integration
It should not affect any downstream projects.

### Review Notes
- Workers initialize once per benchmark to avoid side effects.  
- The listen address is assigned when a worker starts.  
- Benchmarks are divided into two groups by size to create better charts
for comparison.

---------

Co-authored-by: GitHub Action <action@github.com>

tbd

# Description

Closes #6335.

## Integration

N/A

## Review Notes

`RuntimeTarget` is converted to return path to the custom target JSON
file

---------

Signed-off-by: Jarkko Sakkinen <jarkko@parity.io>
Co-authored-by: Alexander Theißen <alex.theissen@me.com>
Co-authored-by: Koute <koute@users.noreply.github.com>

This PR has changes to the `command-backport.yml`:
- swapped action that creates backports PRs from master to the stable
branches and added another app with more permissions

## [0.8.3] - 2024-12-03

This release includes two fixes for small memory leaks on edge-cases in
the notification and request-response protocols.

### Fixed

- req-resp: Fix memory leak of pending substreams
([#297](https://github.com/paritytech/litep2p/pull/297))
- notification: Fix memory leak of pending substreams
([#296](https://github.com/paritytech/litep2p/pull/296))

cc @paritytech/networking

---------

Signed-off-by: Alexandru Vasile <alexandru.vasile@parity.io>

Reference issues
#6574 
#6644

This PR adds the pipeline, that moves release candidate artefacts from
`polkadot-stableYYMM-rcX` bucket to the one that is going to be the
final `polkadot-stableYYMM` (bucket name matches the tag name). So that
it could be used for publishing later without a need to re-build it
again.

No need to have them in the umbrella crate also by having them in the
umbrella crate they are bleeding into the normal build.

---------

Co-authored-by: GitHub Action <action@github.com>
Co-authored-by: Alexander Theißen <alex.theissen@me.com>

This PR provides a number of improvements around handling limits and
priorities in the fork-aware transaction pool.


#### Notes to reviewers.
#### Following are the notable changes:
1. #### [Better
support](https://github.com/paritytech/polkadot-sdk/pull/6405/commits/414ec3cc)
for `Usurped` transactions

When any view reports an `Usurped` transaction (replaced by other with
higher priority) it is removed from all the views (also inactive).
Removal is implemented by simply submitting usurper transaction to all
the views. It is also ensured that usurped tx will not sneak into the
`view_store` in newly created view (this is why
`ViewStore::pending_txs_replacements` was added).

1. ####
[`TimedTransactionSource`](https://github.com/paritytech/polkadot-sdk/pull/6405/commits/f10590f3)
introduced:

Every view now has an information when the transaction entered the pool.
Enforce limits (now only for future txs) uses this timestamp to find
worst transactions. Having common timestamp ensures coherent assessment
of the transaction's importance across different views. This also could
later be used to select which ready transaction shall be dropped.

1. #### `DroppedWatcher`: [improved
logic](https://github.com/paritytech/polkadot-sdk/pull/6405/commits/560db28c)
for future transactions
For future transaction - if the last referencing view is removed, the
transaction will be dropped from the pool. This prevents future
unincluded and un-promoted transactions from staying in the pool for
long time.

#### And some minor changes:

1.
[simplified](https://github.com/paritytech/polkadot-sdk/pull/6405/commits/2d0bbf83)
the flow in `update_view_with_mempool` (code duplication + minor bug
fix).
2. `graph::BasePool`: [handling
priorities](https://github.com/paritytech/polkadot-sdk/pull/6405/commits/c9f2d393)
for future transaction improved (previously transaction with lower prio
was reported as failed),
3. `graph::listener`: dedicated `limit_enforced`/`usurped`/`dropped`
[calls
added](https://github.com/paritytech/polkadot-sdk/pull/6405/commits/7b58a68c),
4. flaky test
[fixed](https://github.com/paritytech/polkadot-sdk/pull/6405/commits/e0a7bc6c

)
5. new tests added,

related to: #5809

---------

Co-authored-by: GitHub Action <action@github.com>
Co-authored-by: Iulian Barbu <14218860+iulianbarbu@users.noreply.github.com>

Add publish-check-compile workflow

This Applies staged prdocs then configures crate deps to pull from
crates.io for our already published crates and local paths for
things to be published. Then runs cargo check on the result.

This results in a build state consitent with that of publish time and
should catch compile errors that we would of otherwise ran into mid
pubish.

This acts as a supplement to the check-semver job. check-semver works on
a high level and judges what changes are incorrect and why. This job
just runs the change, sees if it compiles, and if not spits out
a compile error.

Bump Asset-Hub westend spec version

---------

Co-authored-by: GitHub Action <action@github.com>

On some systems trying to re-create the output directory will lead to an
error.

Fixes https://github.com/paritytech/subxt/issues/1876

---------

Co-authored-by: Bastian Köcher <git@kchr.de>

This PR contains following changes in release pipelines:
- re-built Create Release Draft workflow
- binaries builds are moved completely to the `Release - Build node
release candidate` flow
- added upload of all the release artefacts to the S3
- adjusted `Release - Publish Docker Image` workflow, so that it will
match now the new release flow.

Migrates pallet-offences-benchmarking to benchmark v2 syntax.

Part of:
* #6202

---------

Co-authored-by: Giuseppe Re <giuseppe.re@parity.io>

Migrates pallet-session-benchmarking to bench V2 syntax.

Part of:
* #6202

---------

Co-authored-by: Shawn Tabrizi <shawntabrizi@gmail.com>
Co-authored-by: Giuseppe Re <giuseppe.re@parity.io>

Bumps the ci_dependencies group with 3 updates in the / directory:
[lycheeverse/lychee-action](https://github.com/lycheeverse/lychee-action),
[actions/attest-build-provenance](https://github.com/actions/attest-build-provenance)
and [codecov/codecov-action](https://github.com/codecov/codecov-action).

Updates `lycheeverse/lychee-action` from 2.0.2 to 2.1.0
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/lycheeverse/lychee-action/releases">lycheeverse/lychee-action's
releases</a>.</em></p>
<blockquote>
<h2>Version 2.1.0</h2>
<h2>What's Changed</h2>
<ul>
<li>Add missing argument <code>failIfEmpty</code> by <a
href="https://github.com/LitoMore"><code>@​LitoMore</code></a> in <a
href="https://redirect.github.com/lycheeverse/lychee-action/pull/261">lycheeverse/lychee-action#261</a></li>
<li>Fix bugs about the exit code by <a
href="https://github.com/YDX-2147483647"><code>@​YDX-2147483647</code></a>
in <a
href="https://redirect.github.com/lycheeverse/lychee-action/pull/262">lycheeverse/lychee-action#262</a></li>
<li>Bump lychee version to 0.17.0 by <a
href="https://github.com/mre"><code>@​mre</code></a> in <a
href="https://redirect.github.com/lycheeverse/lychee-action/pull/263">lycheeverse/lychee-action#263</a></li>
</ul>
<h2>New Contributors</h2>
<ul>
<li><a href="https://github.com/LitoMore"><code>@​LitoMore</code></a>
made their first contribution in <a
href="https://redirect.github.com/lycheeverse/lychee-action/pull/261">lycheeverse/lychee-action#261</a></li>
<li><a
href="https://github.com/YDX-2147483647"><code>@​YDX-2147483647</code></a>
made their first contribution in <a
href="https://redirect.github.com/lycheeverse/lychee-action/pull/262">lycheeverse/lychee-action#262</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/lycheeverse/lychee-action/compare/v2...v2.1.0">https://github.com/lycheeverse/lychee-action/compare/v2...v2.1.0</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/lycheeverse/lychee-action/commit/f81112d0d2814ded911bd23e3beaa9dda9093915"><code>f81112d</code></a>
Bump version to 0.17.0 (<a
href="https://redirect.github.com/lycheeverse/lychee-action/issues/263">#263</a>)</li>
<li><a
href="https://github.com/lycheeverse/lychee-action/commit/988c4c129a79e6d2aa7e28cc1ec14997c3b4e831"><code>988c4c1</code></a>
Fix bugs about the exit code (<a
href="https://redirect.github.com/lycheeverse/lychee-action/issues/262">#262</a>)</li>
<li><a
href="https://github.com/lycheeverse/lychee-action/commit/ae4699150ab670dcfb64cc74e8680e776d9caae2"><code>ae46991</code></a>
Add missing argument <code>failIfEmpty</code> (<a
href="https://redirect.github.com/lycheeverse/lychee-action/issues/261">#261</a>)</li>
<li>See full diff in <a
href="https://github.com/lycheeverse/lychee-action/compare/7cd0af4c74a61395d455af97419279d86aafaede...f81112d0d2814ded911bd23e3beaa9dda9093915">compare
view</a></li>
</ul>
</details>
<br />

Updates `actions/attest-build-provenance` from 1.4.3 to 1.4.4
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/actions/attest-build-provenance/releases">actions/attest-build-provenance's
releases</a>.</em></p>
<blockquote>
<h2>v1.4.4</h2>
<h2>What's Changed</h2>
<ul>
<li>Bump predicate action from 1.1.3 to 1.1.4 by <a
href="https://github.com/bdehamer"><code>@​bdehamer</code></a> in <a
href="https://redirect.github.com/actions/attest-build-provenance/pull/310">actions/attest-build-provenance#310</a>
<ul>
<li>Bump <code>@​actions/core</code> from 1.10.1 to 1.11.1 by <a
href="https://github.com/dependabot"><code>@​dependabot</code></a> in <a
href="https://redirect.github.com/actions/attest-build-provenance/pull/275">actions/attest-build-provenance#275</a></li>
<li>Bump <code>@​actions/attest</code> from 1.4.2 to 1.5.0 by <a
href="https://github.com/bdehamer"><code>@​bdehamer</code></a> in <a
href="https://redirect.github.com/actions/attest-build-provenance/pull/309">actions/attest-build-provenance#309</a>
<ul>
<li>Fix SLSA provenance bug related to <code>workflow_ref</code> OIDC
token claims containing the &quot;@&quot; symbol in the tag name (<a
href="https://redirect.github.com/actions/toolkit/pull/1863">actions/toolkit#1863</a>)</li>
</ul>
</li>
</ul>
</li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/actions/attest-build-provenance/compare/v1.4.3...v1.4.4">https://github.com/actions/attest-build-provenance/compare/v1.4.3...v1.4.4</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/actions/attest-build-provenance/commit/ef244123eb79f2f7a7e75d99086184180e6d0018"><code>ef24412</code></a>
bump predicate from 1.1.3 to 1.1.4 (<a
href="https://redirect.github.com/actions/attest-build-provenance/issues/310">#310</a>)</li>
<li><a
href="https://github.com/actions/attest-build-provenance/commit/36fa7d009e22618ca7cd599486979b8150596c74"><code>36fa7d0</code></a>
bump <code>@​actions/attest</code> from 1.4.2 to 1.5.0 (<a
href="https://redirect.github.com/actions/attest-build-provenance/issues/309">#309</a>)</li>
<li><a
href="https://github.com/actions/attest-build-provenance/commit/390c0bb1a35248f1131918ae2ff5fbebb9c49da4"><code>390c0bb</code></a>
Bump <code>@​types/node</code> from 22.8.1 to 22.8.7 in the
npm-development group (<a
href="https://redirect.github.com/actions/attest-build-provenance/issues/305">#305</a>)</li>
<li><a
href="https://github.com/actions/attest-build-provenance/commit/21da615079f466933bace548cfb08958dd87adbb"><code>21da615</code></a>
Bump the npm-development group with 3 updates (<a
href="https://redirect.github.com/actions/attest-build-provenance/issues/299">#299</a>)</li>
<li><a
href="https://github.com/actions/attest-build-provenance/commit/0704961b8bd76c74543032539a4b87550ca97441"><code>0704961</code></a>
Bump actions/publish-immutable-action in the actions-minor group (<a
href="https://redirect.github.com/actions/attest-build-provenance/issues/298">#298</a>)</li>
<li><a
href="https://github.com/actions/attest-build-provenance/commit/d01b0709fadd560939726341a0459eef1833df34"><code>d01b070</code></a>
Bump the npm-development group with 3 updates (<a
href="https://redirect.github.com/actions/attest-build-provenance/issues/278">#278</a>)</li>
<li><a
href="https://github.com/actions/attest-build-provenance/commit/b1d65e4607685bd199bc1fa97811cbac797bd0ab"><code>b1d65e4</code></a>
Add workflow file for publishing releases to immutable action package
(<a
href="https://redirect.github.com/actions/attest-build-provenance/issues/277">#277</a>)</li>
<li><a
href="https://github.com/actions/attest-build-provenance/commit/3a2769405e23849cccd820e7eab22ac9e0f57754"><code>3a27694</code></a>
Bump <code>@​actions/core</code> from 1.10.1 to 1.11.1 (<a
href="https://redirect.github.com/actions/attest-build-provenance/issues/275">#275</a>)</li>
<li><a
href="https://github.com/actions/attest-build-provenance/commit/dff1ae69a71254b807bee9e2f72c7ab0eed66e60"><code>dff1ae6</code></a>
prevent e2e workflows on forks (<a
href="https://redirect.github.com/actions/attest-build-provenance/issues/272">#272</a>)</li>
<li><a
href="https://github.com/actions/attest-build-provenance/commit/e5892d032c30c69d4973a976c8bf77e9e470abdf"><code>e5892d0</code></a>
Bump the npm-development group with 3 updates (<a
href="https://redirect.github.com/actions/attest-build-provenance/issues/263">#263</a>)</li>
<li>Additional commits viewable in <a
href="https://github.com/actions/attest-build-provenance/compare/1c608d11d69870c2092266b3f9a6f3abbf17002c...ef244123eb79f2f7a7e75d99086184180e6d0018">compare
view</a></li>
</ul>
</details>
<br />

Updates `codecov/codecov-action` from 4 to 5
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/codecov/codecov-action/releases">codecov/codecov-action's
releases</a>.</em></p>
<blockquote>
<h2>v5.0.0</h2>
<h2>v5 Release</h2>
<p><code>v5</code> of the Codecov GitHub Action will use the <a
href="https://github.com/codecov/wrapper">Codecov Wrapper</a> to
encapsulate the <a
href="https://github.com/codecov/codecov-cli">CLI</a>. This will help
ensure that the Action gets updates quicker.</p>
<h3>Migration Guide</h3>
<p>The <code>v5</code> release also coincides with the opt-out feature
for tokens for public repositories. In the <code>Global Upload
Token</code> section of the settings page of an organization in
codecov.io, you can set the ability for Codecov to receive a coverage
reports from any source. This will allow contributors or other members
of a repository to upload without needing access to the Codecov token.
For more details see <a
href="https://docs.codecov.com/docs/codecov-tokens#uploading-without-a-token">how
to upload without a token</a>.</p>
<blockquote>
<p>[!WARNING]<br />
<strong>The following arguments have been changed</strong></p>
<ul>
<li><code>file</code> (this has been deprecated in favor of
<code>files</code>)</li>
<li><code>plugin</code> (this has been deprecated in favor of
<code>plugins</code>)</li>
</ul>
</blockquote>
<p>The following arguments have been added:</p>
<ul>
<li><code>binary</code></li>
<li><code>gcov_args</code></li>
<li><code>gcov_executable</code></li>
<li><code>gcov_ignore</code></li>
<li><code>gcov_include</code></li>
<li><code>report_type</code></li>
<li><code>skip_validation</code></li>
<li><code>swift_project</code></li>
</ul>
<p>You can see their usage in the <code>action.yml</code> <a
href="https://github.com/codecov/codecov-action/blob/main/action.yml">file</a>.</p>
<h2>What's Changed</h2>
<ul>
<li>chore(deps): bump to eslint9+ and remove eslint-config-google by <a
href="https://github.com/thomasrockhu-codecov"><code>@​thomasrockhu-codecov</code></a>
in <a
href="https://redirect.github.com/codecov/codecov-action/pull/1591">codecov/codecov-action#1591</a></li>
<li>build(deps-dev): bump <code>@​octokit/webhooks-types</code> from
7.5.1 to 7.6.1 by <a
href="https://github.com/dependabot"><code>@​dependabot</code></a> in <a
href="https://redirect.github.com/codecov/codecov-action/pull/1595">codecov/codecov-action#1595</a></li>
<li>build(deps-dev): bump typescript from 5.6.2 to 5.6.3 by <a
href="https://github.com/dependabot"><code>@​dependabot</code></a> in <a
href="https://redirect.github.com/codecov/codecov-action/pull/1604">codecov/codecov-action#1604</a></li>
<li>build(deps-dev): bump <code>@​typescript-eslint/parser</code> from
8.8.0 to 8.8.1 by <a
href="https://github.com/dependabot"><code>@​dependabot</code></a> in <a
href="https://redirect.github.com/codecov/codecov-action/pull/1601">codecov/codecov-action#1601</a></li>
<li>build(deps): bump <code>@​actions/core</code> from 1.11.0 to 1.11.1
by <a href="https://github.com/dependabot"><code>@​dependabot</code></a>
in <a
href="https://redirect.github.com/codecov/codecov-action/pull/1597">codecov/codecov-action#1597</a></li>
<li>build(deps): bump github/codeql-action from 3.26.9 to 3.26.11 by <a
href="https://github.com/dependabot"><code>@​dependabot</code></a> in <a
href="https://redirect.github.com/codecov/codecov-action/pull/1596">codecov/codecov-action#1596</a></li>
<li>build(deps-dev): bump <code>@​typescript-eslint/eslint-plugin</code>
from 8.8.0 to 8.8.1 by <a
href="https://github.com/dependabot"><code>@​dependabot</code></a> in <a
href="https://redirect.github.com/codecov/codecov-action/pull/1600">codecov/codecov-action#1600</a></li>
<li>build(deps-dev): bump eslint from 9.11.1 to 9.12.0 by <a
href="https://github.com/dependabot"><code>@​dependabot</code></a> in <a
href="https://redirect.github.com/codecov/codecov-action/pull/1598">codecov/codecov-action#1598</a></li>
<li>build(deps): bump github/codeql-action from 3.26.11 to 3.26.12 by <a
href="https://github.com/dependabot"><code>@​dependabot</code></a> in <a
href="https://redirect.github.com/codecov/codecov-action/pull/1609">codecov/codecov-action#1609</a></li>
<li>build(deps): bump actions/checkout from 4.2.0 to 4.2.1 by <a
href="https://github.com/dependabot"><code>@​dependabot</code></a> in <a
href="https://redirect.github.com/codecov/codecov-action/pull/1608">codecov/codecov-action#1608</a></li>
<li>build(deps): bump actions/upload-artifact from 4.4.0 to 4.4.3 by <a
href="https://github.com/dependabot"><code>@​dependabot</code></a> in <a
href="https://redirect.github.com/codecov/codecov-action/pull/1607">codecov/codecov-action#1607</a></li>
<li>build(deps-dev): bump <code>@​typescript-eslint/parser</code> from
8.8.1 to 8.9.0 by <a
href="https://github.com/dependabot"><code>@​dependabot</code></a> in <a
href="https://redirect.github.com/codecov/codecov-action/pull/1612">codecov/codecov-action#1612</a></li>
<li>build(deps-dev): bump <code>@​typescript-eslint/eslint-plugin</code>
from 8.8.1 to 8.9.0 by <a
href="https://github.com/dependabot"><code>@​dependabot</code></a> in <a
href="https://redirect.github.com/codecov/codecov-action/pull/1611">codecov/codecov-action#1611</a></li>
<li>build(deps-dev): bump <code>@​typescript-eslint/eslint-plugin</code>
from 8.9.0 to 8.10.0 by <a
href="https://github.com/dependabot"><code>@​dependabot</code></a> in <a
href="https://redirect.github.com/codecov/codecov-action/pull/1615">codecov/codecov-action#1615</a></li>
<li>build(deps-dev): bump eslint from 9.12.0 to 9.13.0 by <a
href="https://github.com/dependabot"><code>@​dependabot</code></a> in <a
href="https://redirect.github.com/codecov/codecov-action/pull/1618">codecov/codecov-action#1618</a></li>
<li>build(deps): bump github/codeql-action from 3.26.12 to 3.26.13 by <a
href="https://github.com/dependabot"><code>@​dependabot</code></a> in <a
href="https://redirect.github.com/codecov/codecov-action/pull/1617">codecov/codecov-action#1617</a></li>
<li>build(deps-dev): bump <code>@​typescript-eslint/parser</code> from
8.9.0 to 8.10.0 by <a
href="https://github.com/dependabot"><code>@​dependabot</code></a> in <a
href="https://redirect.github.com/codecov/codecov-action/pull/1614">codecov/codecov-action#1614</a></li>
<li>build(deps-dev): bump <code>@​typescript-eslint/eslint-plugin</code>
from 8.10.0 to 8.11.0 by <a
href="https://github.com/dependabot"><code>@​dependabot</code></a> in <a
href="https://redirect.github.com/codecov/codecov-action/pull/1620">codecov/codecov-action#1620</a></li>
<li>build(deps-dev): bump <code>@​typescript-eslint/parser</code> from
8.10.0 to 8.11.0 by <a
href="https://github.com/dependabot"><code>@​dependabot</code></a> in <a
href="https://redirect.github.com/codecov/codecov-action/pull/1619">codecov/codecov-action#1619</a></li>
<li>build(deps-dev): bump <code>@​types/jest</code> from 29.5.13 to
29.5.14 by <a
href="https://github.com/dependabot"><code>@​dependabot</code></a> in <a
href="https://redirect.github.com/codecov/codecov-action/pull/1622">codecov/codecov-action#1622</a></li>
<li>build(deps): bump actions/checkout from 4.2.1 to 4.2.2 by <a
href="https://github.com/dependabot"><code>@​dependabot</code></a> in <a
href="https://redirect.github.com/codecov/codecov-action/pull/1625">codecov/codecov-action#1625</a></li>
<li>build(deps): bump github/codeql-action from 3.26.13 to 3.27.0 by <a
href="https://github.com/dependabot"><code>@​dependabot</code></a> in <a
href="https://redirect.github.com/codecov/codecov-action/pull/1624">codecov/codecov-action#1624</a></li>
<li>build(deps-dev): bump <code>@​typescript-eslint/eslint-plugin</code>
from 8.11.0 to 8.12.1 by <a
href="https://github.com/dependabot"><code>@​dependabot</code></a> in <a
href="https://redirect.github.com/codecov/codecov-action/pull/1626">codecov/codecov-action#1626</a></li>
<li>build(deps-dev): bump <code>@​typescript-eslint/eslint-plugin</code>
from 8.12.1 to 8.12.2 by <a
href="https://github.com/dependabot"><code>@​dependabot</code></a> in <a
href="https://redirect.github.com/codecov/codecov-action/pull/1629">codecov/codecov-action#1629</a></li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/codecov/codecov-action/blob/main/CHANGELOG.md">codecov/codecov-action's
changelog</a>.</em></p>
<blockquote>
<h2>4.0.0-beta.2</h2>
<h3>Fixes</h3>
<ul>
<li><a
href="https://redirect.github.com/codecov/codecov-action/issues/1085">#1085</a>
not adding -n if empty to do-upload command</li>
</ul>
<h2>4.0.0-beta.1</h2>
<p><code>v4</code> represents a move from the <a
href="https://github.com/codecov/uploader">universal uploader</a> to the
<a href="https://github.com/codecov/codecov-cli">Codecov CLI</a>.
Although this will unlock new features for our users, the CLI is not yet
at feature parity with the universal uploader.</p>
<h3>Breaking Changes</h3>
<ul>
<li>No current support for <code>aarch64</code> and <code>alpine</code>
architectures.</li>
<li>Tokenless uploading is unsuported</li>
<li>Various arguments to the Action have been removed</li>
</ul>
<h2>3.1.4</h2>
<h3>Fixes</h3>
<ul>
<li><a
href="https://redirect.github.com/codecov/codecov-action/issues/967">#967</a>
Fix typo in README.md</li>
<li><a
href="https://redirect.github.com/codecov/codecov-action/issues/971">#971</a>
fix: add back in working dir</li>
<li><a
href="https://redirect.github.com/codecov/codecov-action/issues/969">#969</a>
fix: CLI option names for uploader</li>
</ul>
<h3>Dependencies</h3>
<ul>
<li><a
href="https://redirect.github.com/codecov/codecov-action/issues/970">#970</a>
build(deps-dev): bump <code>@​types/node</code> from 18.15.12 to
18.16.3</li>
<li><a
href="https://redirect.github.com/codecov/codecov-action/issues/979">#979</a>
build(deps-dev): bump <code>@​types/node</code> from 20.1.0 to
20.1.2</li>
<li><a
href="https://redirect.github.com/codecov/codecov-action/issues/981">#981</a>
build(deps-dev): bump <code>@​types/node</code> from 20.1.2 to
20.1.4</li>
</ul>
<h2>3.1.3</h2>
<h3>Fixes</h3>
<ul>
<li><a
href="https://redirect.github.com/codecov/codecov-action/issues/960">#960</a>
fix: allow for aarch64 build</li>
</ul>
<h3>Dependencies</h3>
<ul>
<li><a
href="https://redirect.github.com/codecov/codecov-action/issues/957">#957</a>
build(deps-dev): bump jest-junit from 15.0.0 to 16.0.0</li>
<li><a
href="https://redirect.github.com/codecov/codecov-action/issues/958">#958</a>
build(deps): bump openpgp from 5.7.0 to 5.8.0</li>
<li><a
href="https://redirect.github.com/codecov/codecov-action/issues/959">#959</a>
build(deps-dev): bump <code>@​types/node</code> from 18.15.10 to
18.15.12</li>
</ul>
<h2>3.1.2</h2>
<h3>Fixes</h3>
<ul>
<li><a
href="https://redirect.github.com/codecov/codecov-action/issues/718">#718</a>
Update README.md</li>
<li><a
href="https://redirect.github.com/codecov/codecov-action/issues/851">#851</a>
Remove unsupported path_to_write_report argument</li>
<li><a
href="https://redirect.github.com/codecov/codecov-action/issues/898">#898</a>
codeql-analysis.yml</li>
<li><a
href="https://redirect.github.com/codecov/codecov-action/issues/901">#901</a>
Update README to contain correct information - inputs and negate
feature</li>
<li><a
href="https://redirect.github.com/codecov/codecov-action/issues/955">#955</a>
fix: add in all the extra arguments for uploader</li>
</ul>
<h3>Dependencies</h3>
<ul>
<li><a
href="https://redirect.github.com/codecov/codecov-action/issues/819">#819</a>
build(deps): bump openpgp from 5.4.0 to 5.5.0</li>
<li><a
href="https://redirect.github.com/codecov/codecov-action/issues/835">#835</a>
build(deps): bump node-fetch from 3.2.4 to 3.2.10</li>
<li><a
href="https://redirect.github.com/codecov/codecov-action/issues/840">#840</a>
build(deps): bump ossf/scorecard-action from 1.1.1 to 2.0.4</li>
<li><a
href="https://redirect.github.com/codecov/codecov-action/issues/841">#841</a>
build(deps): bump <code>@​actions/core</code> from 1.9.1 to 1.10.0</li>
<li><a
href="https://redirect.github.com/codecov/codecov-action/issues/843">#843</a>
build(deps): bump <code>@​actions/github</code> from 5.0.3 to 5.1.1</li>
<li><a
href="https://redirect.github.com/codecov/codecov-action/issues/869">#869</a>
build(deps): bump node-fetch from 3.2.10 to 3.3.0</li>
<li><a
href="https://redirect.github.com/codecov/codecov-action/issues/872">#872</a>
build(deps-dev): bump jest-junit from 13.2.0 to 15.0.0</li>
<li><a
href="https://redirect.github.com/codecov/codecov-action/issues/879">#879</a>
build(deps): bump decode-uri-component from 0.2.0 to 0.2.2</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/codecov/codecov-action/commit/5c47607acb93fed5485fdbf7232e8a31425f672a"><code>5c47607</code></a>
fix: override commit and pr values for PR cases (<a
href="https://redirect.github.com/codecov/codecov-action/issues/1657">#1657</a>)</li>
<li><a
href="https://github.com/codecov/codecov-action/commit/3b1354a6c45db9f1008891f4eafc1a7e94ce1d18"><code>3b1354a</code></a>
chore(release): 5.0.1 (<a
href="https://redirect.github.com/codecov/codecov-action/issues/1656">#1656</a>)</li>
<li><a
href="https://github.com/codecov/codecov-action/commit/2e2a9c6d5862d22e0f8cfb59d46bc47bf8eb1fe0"><code>2e2a9c6</code></a>
fix: update tokenless branch logic (<a
href="https://redirect.github.com/codecov/codecov-action/issues/1650">#1650</a>)</li>
<li><a
href="https://github.com/codecov/codecov-action/commit/cfc521b7a1dcdbcf0ecf149c162c19ff9bd9568c"><code>cfc521b</code></a>
Update README.md</li>
<li><a
href="https://github.com/codecov/codecov-action/commit/06425412c8015bc1ab2385b41c7ea204f77b91bf"><code>0642541</code></a>
fix: use marketplace v5 badge (<a
href="https://redirect.github.com/codecov/codecov-action/issues/1646">#1646</a>)</li>
<li><a
href="https://github.com/codecov/codecov-action/commit/968872560f81e7bdde9272853e65f2507c0eca7c"><code>9688725</code></a>
Update README.md</li>
<li><a
href="https://github.com/codecov/codecov-action/commit/2112eaec1bedbdabc7e93d5312449d0d62b07c60"><code>2112eae</code></a>
chore(deps): bump wrapper to 0.0.23 (<a
href="https://redirect.github.com/codecov/codecov-action/issues/1644">#1644</a>)</li>
<li><a
href="https://github.com/codecov/codecov-action/commit/193421c5b3d1aca4209c9754f224ca0d85729414"><code>193421c</code></a>
fixL use the correct source (<a
href="https://redirect.github.com/codecov/codecov-action/issues/1642">#1642</a>)</li>
<li><a
href="https://github.com/codecov/codecov-action/commit/6018df70b05b191502ce08196e76e30ea3578615"><code>6018df7</code></a>
fix: update container builds (<a
href="https://redirect.github.com/codecov/codecov-action/issues/1640">#1640</a>)</li>
<li><a
href="https://github.com/codecov/codecov-action/commit/eff1a643d6887ee5935d4ca343e9076dc377d416"><code>eff1a64</code></a>
fix: add missing vars (<a
href="https://redirect.github.com/codecov/codecov-action/issues/1638">#1638</a>)</li>
<li>Additional commits viewable in <a
href="https://github.com/codecov/codecov-action/compare/v4...v5">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

* Add a bunch of differential tests to ensure that responses from
eth-rpc matches the one from `geth`
- These
[tests](https://github.com/paritytech/polkadot-sdk/blob/pg/fix-geth-diff/substrate/frame/revive/rpc/examples/js/src/geth-diff.test.ts)
are not run in CI for now but can be run locally with
```bash
cd revive/rpc/examples/js
bun test
```

* EVM RPC server will not fail gas_estimation if no gas is specified, I
updated pallet-revive to add an extra `skip_transfer` boolean check to
replicate this behavior in our pallet

* `eth_transact` and `bare_eth_transact` api have been updated to use
`GenericTransaction` directly as this is what is used by
`eth_estimateGas` and `eth_call`

## TODO

- [ ]  Add tests the new `skip_transfer` flag

---------

Co-authored-by: GitHub Action <action@github.com>
Co-authored-by: Alexander Theißen <alex.theissen@me.com>

This might actually happen in non malicious cases.

Co-authored-by: eskimor <eskimor@no-such-url.com>

Fixes https://github.com/paritytech/polkadot-sdk/issues/6598.

---------

Co-authored-by: GitHub Action <action@github.com>

# Description

Made as a follow-up of
https://github.com/polkadot-fellows/runtimes/pull/499

## Integration

N/A

## Review Notes

N/A

---------

Co-authored-by: Dónal Murray <donal.murray@parity.io>

# Description

Updates scale-info to from 2.11.5 2.11.6, so that generated code is
annotated with `allow(deprecated)`
Pre-requisite for https://github.com/paritytech/polkadot-sdk/pull/6312

This PR adapts the `archive_storage` implementation from a method to a
subscription.

This keeps the archive APIs uniform and consistent.

Builds on: https://github.com/paritytech/polkadot-sdk/pull/5997

cc @paritytech/subxt-team

---------

Signed-off-by: Alexandru Vasile <alexandru.vasile@parity.io>
Co-authored-by: James Wilson <james@jsdw.me>

Construct runtime uses autoref-based specialization to fetch the
metadata about the implemented runtime apis. This is done to not fail to
compile when there are no runtime apis implemented. However, there was
an issue with detecting runtime apis when they were implemented in a
different file. The problem is solved by moving the trait implemented by
`impl_runtime_apis!` to the metadata ir crate.


Closes: https://github.com/paritytech/polkadot-sdk/issues/6659

---------

Co-authored-by: GitHub Action <action@github.com>

This PR updates pallet_revive to the newest PolkaVM version and adapts
the test fixtures and syscall interface to work under 64bit.

Please note that after this PR no 32bit contracts can be deployed (they
will be rejected at deploy time). Pre-deployed 32bit contracts are now
considered defunct since we changes how parameters are passed for
functions with more than 6 arguments.

## Fixtures

The fixtures are now built for the 64bit target. I also removed the
temporary directory mechanism that triggered a full rebuild every time.
It also makes it easier to find the compiled fixtures since they are now
always in `target/pallet-revive-fixtures`.

## Syscall interface

### Passing pointer

Registers and pointers are now 64bit wide. This allows us to pass u64
arguments in a single register. Before we needed two registers to pass
them. This means that just as before we need one register per pointer we
pass. We keep pointers as `u32` argument by truncating the register.
This is done since the memory space of PolkaVM is 32bit.

### Functions with more than 6 arguments

We only have 6 registers to pass arguments. This is why we pass a
pointer to a struct when we need more than 6. Before this PR we expected
a packed struct and interpreted it as SCALE encoded tuple. However, this
was buggy because the `MaxEncodedLen` returned something that was larger
than the packed size of the structure. This wasn't a problem before. But
now the memory space changed in a way that things were placed at the
edges of the memory space and those extra bytes lead to an out of bound
access.

This is why this PR drops SCALE and expects the arguments to be passed
as a pointer to a `C` aligned struct. This avoids unaligned accesses.
However, revive needs to adapt its codegen to properly align the
structure fields.

## TODO
- [ ] Add multi block migration that wipes all existing contracts as we
made breaking changes to the syscall interface

---------

Co-authored-by: GitHub Action <action@github.com>

Part of:

- #6202.

---------

Co-authored-by: Giuseppe Re <giuseppe.re@parity.io>
Co-authored-by: command-bot <>

cc https://github.com/paritytech/ci_cd/issues/1088

# Description

At moonbeam we have worked on a `lazy-loading` feature which is a client
mode that forks a live parachain and fetches its state on-demand, we
have been able to do this by duplicating some code from
`sc_service::client`. The objective of this PR is to simplify the
implementation by making public some types in polkadot-sdk.

- Modules:
- `sc_service::client` **I do not see a point to only expose this type
when `test-helpers` feature is enabled**

## Integration

Not applicable, the PR just makes some types public.

## Review Notes

The changes included in this PR give more flexibility for client
developers by exposing important types.

The argument index of the next argument is dictated by the size of the
current one.

---------

Signed-off-by: xermicus <cyrill@parity.io>
Co-authored-by: GitHub Action <action@github.com>
Co-authored-by: Alexander Theißen <alex.theissen@me.com>

# Description
Migrated pallet-state-trie-migration benchmarking to the new
benchmarking syntax v2.
This is part of #6202

Co-authored-by: Shawn Tabrizi <shawntabrizi@gmail.com>
Co-authored-by: Giuseppe Re <giuseppe.re@parity.io>

# Description
Migrated pallet-xcm-benchmarks to benchmaking syntax V2
This is part of #6202

---------

Co-authored-by: Giuseppe Re <giuseppe.re@parity.io>

Previously, we added multi-instance pallet support for
`pallet-bridge-relayers`, but missed fixing it in this one place.

---------

Co-authored-by: GitHub Action <action@github.com>
Co-authored-by: Adrian Catangiu <adrian@parity.io>

This includes a critical fix for debug release versions of litep2p
(which are running in Kusama as validators).

While at it, have stopped the oncall pain of alerts around
`incoming_connections_total`. We can rethink the metric expose of
litep2p in Q1.





## [0.8.2] - 2024-11-27

This release ensures that the provided peer identity is verified at the
crypto/noise protocol level, enhancing security and preventing potential
misuses.
The release also includes a fix that caused `TransportService` component
to panic on debug builds.

### Fixed

- req-resp: Fix panic on connection closed for substream open failure
([#291](https://github.com/paritytech/litep2p/pull/291))
- crypto/noise: Verify crypto/noise signature payload
([#278](https://github.com/paritytech/litep2p/pull/278))

### Changed

- transport_service/logs: Provide less details for trace logs
([#292](https://github.com/paritytech/litep2p/pull/292))


## Testing Done

This has been extensively tested in Kusama on all validators, that are
now running litep2p.

Deployed PR: https://github.com/paritytech/polkadot-sdk/pull/6638

### Litep2p Dashboards
![Screenshot 2024-11-26 at 19 19
41](https://github.com/user-attachments/assets/e00b2b2b-7e64-4d96-ab26-165e2b8d0dc9)


### Libp2p vs Litep2p CPU usage

After deploying litep2p we have reduced CPU usage from around 300-400%
to 200%, this is a significant boost in performance, freeing resources
for other subcomponents to function more optimally.


![image(1)](https://github.com/user-attachments/assets/fa793df5-4d58-4601-963d-246e56dd2a26)



cc @paritytech/sdk-node

---------

Signed-off-by: Alexandru Vasile <alexandru.vasile@parity.io>
Co-authored-by: GitHub Action <action@github.com>

In `chain-spec-guide-runtime` crate's tests, there was assumption that
release version of wasm blob exists. This PR uses
`chain_spec_guide_runtime::runtime::WASM_BINARY_PATH` const to use
correct path to runtime blob.

---------

Co-authored-by: GitHub Action <action@github.com>