# Note for reviewer

Most changes are just syntax changes necessary for the new version.
Most important files should be the ones under the `xcm` folder.

# Description 

Added XCMv4.

## Removed `Multi` prefix
The following types have been renamed:
- MultiLocation -> Location
- MultiAsset -> Asset
- MultiAssets -> Assets
- InteriorMultiLocation -> InteriorLocation
- MultiAssetFilter -> AssetFilter
- VersionedMultiAsset -> VersionedAsset
- WildMultiAsset -> WildAsset
- VersionedMultiLocation -> VersionedLocation

In order to fix a name conflict, the `Assets` in `xcm-executor` were
renamed to `HoldingAssets`, as they represent assets in holding.

## Removed `Abstract` asset id

It was not being used anywhere and this simplifies the code.

Now assets are just constructed as follows:

```rust
let asset: Asset = (AssetId(Location::new(1, Here)), 100u128).into();
```

No need for specifying `Concrete` anymore.

## Outcome is now a named fields struct

Instead of

```rust
pub enum Outcome {
  Complete(Weight),
  Incomplete(Weight, Error),
  Error(Error),
}
```

we now have

```rust
pub enum Outcome {
  Complete { used: Weight },
  Incomplete { used: Weight, error: Error },
  Error { error: Error },
}
```

## Added Reanchorable trait

Now both locations and assets implement this trait, making it easier to
reanchor both.

## New syntax for building locations and junctions

Now junctions are built using the following methods:

```rust
let location = Location {
    parents: 1,
    interior: [Parachain(1000), PalletInstance(50), GeneralIndex(1984)].into()
};
```

or

```rust
let location = Location::new(1, [Parachain(1000), PalletInstance(50), GeneralIndex(1984)]);
```

And they are matched like so:

```rust
match location.unpack() {
  (1, [Parachain(id)]) => ...
  (0, Here) => ...,
  (1, [_]) => ...,
}
```

This syntax is mandatory in v4, and has been also implemented for v2 and
v3 for easier migration.

This was needed to make all sizes smaller.

# TODO
- [x] Scaffold v4
- [x] Port github.com/paritytech/polkadot/pull/7236
- [x] Remove `Multi` prefix
- [x] Remove `Abstract` asset id

---------

Co-authored-by: command-bot <>
Co-authored-by: Keith Yeung <[email protected]>

This PR contains just a few clippy fixes and nits, which are, however,
relaxed by workspace clippy settings here:
https://github.com/paritytech/polkadot-sdk/blob/master/Cargo.toml#L483-L506

---------

Co-authored-by: Dmitry Sinyavin <[email protected]>
Co-authored-by: ordian <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Bastian Köcher <[email protected]>

In the move from the old `Currency` traits to the new `fungible/s`
family of traits, we already had the `FungiblesAdapter` and
`NonFungiblesAdapter` for multiple fungible and non fungible assets
respectively. However, for handling only one fungible asset, we were
missing a `FungibleAdapter`, and so used the old `CurrencyAdapter`
instead. This PR aims to fill in that gap, and provide the new adapter
for more updated examples.

I marked the old `CurrencyAdapter` as deprecated as part of this PR, and
I'll change it to the new `FungibleAdapter` in a following PR.
The two stages are separated so as to not bloat this PR with some name
fixes in tests.

---------

Co-authored-by: command-bot <>

## Summary

This pull request proposes a solution for improved control of the
versioned XCM flow over the bridge (across different consensus chains)
and resolves the situation where the sending chain/consensus has already
migrated to a higher XCM version than the receiving chain/consensus.

## Problem/Motivation

The current flow over the bridge involves a transfer from AssetHubRococo
(AHR) to BridgeHubRococo (BHR) to BridgeHubWestend (BHW) and finally to
AssetHubWestend (AHW), beginning with a reserve-backed transfer on AHR.

In this process:
1. AHR sends XCM `ExportMessage` through `XcmpQueue`, incorporating XCM
version checks using the `WrapVersion` feature, influenced by
`pallet_xcm::SupportedVersion` (managed by
`pallet_xcm::force_xcm_version` or version discovery).

2. BHR handles the `ExportMessage` instruction, utilizing the latest XCM
version. The `HaulBlobExporter` converts the inner XCM to
[`VersionedXcm::from`](https://github.com/paritytech/polkadot-sdk/blob/63ac2471/polkadot/xcm/xcm-builder/src/universal_exports.rs#L465-L467),
also using the latest XCM version.

However, challenges arise:
- Incompatibility when BHW uses a different version than BHR. For
instance, if BHR migrates to **XCMv4** while BHW remains on **XCMv3**,
BHR's `VersionedXcm::from` uses `VersionedXcm::V4` variant, causing
encoding issues for BHW.
  ```
	/// Just a simulation of possible error, which could happen on BHW
	/// (this code is based on actual master without XCMv4)
	let encoded = hex_literal::hex!("0400");
	println!("{:?}", VersionedXcm::<()>::decode(&mut &encoded[..]));

Err(Error { cause: None, desc: "Could not decode `VersionedXcm`, variant
doesn't exist" })
  ``` 
- Similar compatibility issues exist between AHR and AHW.

## Solution

This pull request introduces the following solutions:

1. **New trait `CheckVersion`** - added to the `xcm` module and exposing
`pallet_xcm::SupportedVersion`. This enhancement allows checking the
actual XCM version for desired destinations outside of the `pallet_xcm`
module.

2. **Version Check in `HaulBlobExporter`** uses `CheckVersion` to check
known/configured destination versions, ensuring compatibility. For
example, in the scenario mentioned, BHR can store the version `3` for
BHW. If BHR is on XCMv4, it will attempt to downgrade the message to
version `3` instead of using the latest version `4`.

3. **Version Check in `pallet-xcm-bridge-hub-router`** - this check
ensures compatibility with the real destination's XCM version,
preventing the unnecessary sending of messages to the local bridge hub
if versions are incompatible.

These additions aim to improve the control and compatibility of XCM
flows over the bridge and addressing issues related to version
mismatches.

## Possible alternative solution

_(More investigation is needed, and at the very least, it should extend
to XCMv4/5. If this proves to be a viable option, I can open an RFC for
XCM.)._

Add the `XcmVersion` attribute to the `ExportMessage` so that the
sending chain can determine, based on what is stored in
`pallet_xcm::SupportedVersion`, the version the destination is using.
This way, we may not need to handle the version in `HaulBlobExporter`.

```
ExportMessage {
	network: NetworkId,
	destination: InteriorMultiLocation,
	xcm: Xcm<()>
	destination_xcm_version: Version, // <- new attritbute
},
```

```
pub trait ExportXcm {
        fn validate(
		network: NetworkId,
		channel: u32,
		universal_source: &mut Option<InteriorMultiLocation>,
		destination: &mut Option<InteriorMultiLocation>,
		message: &mut Option<Xcm<()>>,
                destination_xcm_version: Version, , // <- new attritbute
	) -> SendResult<Self::Ticket>;
```

## Future Directions

This PR does not fix version discovery over bridge, further
investigation will be conducted here:
https://github.com/paritytech/polkadot-sdk/issues/2417.

## TODO

- [x] `pallet_xcm` mock for tests uses hard-coded XCM version `2` -
change to 3 or lastest?
- [x] fix `pallet-xcm-bridge-hub-router`
- [x] fix HaulBlobExporter with version determination
[here](https://github.com/paritytech/polkadot-sdk/blob/2183669d/polkadot/xcm/xcm-builder/src/universal_exports.rs#L465)
- [x] add unit-tests to the runtimes
- [x] run benchmarks for `ExportMessage`
- [x] extend local run scripts about `force_xcm_version(dest, version)`
- [ ] when merged, prepare governance calls for Rococo/Westend
- [ ] add PRDoc

Part of: https://github.com/paritytech/parity-bridges-common/issues/2719

---------

Co-authored-by: command-bot <>

For some reason original PR passed CI - when it shouldn't have. Fix
`pallet-xcm` test benchmarks.

# Motivation (+testing)

### Enable easy `ForeignAssets` transfers using `pallet-xcm` 

We had just previously added capabilities to teleport fees during
reserve-based transfers, but what about reserve-transferring fees when
needing to teleport some non-fee asset?

This PR aligns everything under either explicit reserve-transfer,
explicit teleport, or this new flexible `transfer_assets()` which can
mix and match as needed with fewer artificial constraints imposed to the
user.

This will enable, for example, a (non-system) parachain to teleport
their `ForeignAssets` assets to AssetHub while using DOT to pay fees.
(the assets are teleported - as foreign assets should from their owner
chain - while DOT used for fees can only be reserve-based transferred
between said parachain and AssetHub).

Added `xcm-emulator` tests for this scenario ^.

# Description

Reverts `(limited_)reserve_transfer_assets` to only allow reserve-based
transfers for all `assets` including fees.

Similarly `(limited_)teleport_assets` only allows teleports for all
`assets` including fees.
    
For complex combinations of asset transfers where assets and fees may
have different reserves or different reserve/teleport trust
configurations, users can use the newly added `transfer_assets()`
extrinsic which is more flexible in allowing more complex scenarios.

`assets` (excluding `fees`) must have same reserve location or otherwise
be teleportable to `dest`.
No limitations imposed on `fees`.

- for local reserve: transfer assets to sovereign account of destination
chain and forward a notification XCM to `dest` to mint and deposit
reserve-based assets to `beneficiary`.
- for destination reserve: burn local assets and forward a notification
to `dest` chain to withdraw the reserve assets from this chain's
sovereign account and deposit them to `beneficiary`.
- for remote reserve: burn local assets, forward XCM to reserve chain to
move reserves from this chain's SA to `dest` chain's SA, and forward
another XCM to `dest` to mint and deposit reserve-based assets to
`beneficiary`.
- for teleports: burn local assets and forward XCM to `dest` chain to
mint/teleport assets and deposit them to `beneficiary`.

## Review notes

Only around 500 lines are prod code (see `pallet_xcm/src/lib.rs`), the
rest of the PR is new tests and improving existing tests.

---------

Co-authored-by: command-bot <>

Step in https://github.com/paritytech/polkadot-sdk/issues/171

This PR adds `derive_impl` on all `frame_system` config impls for mock
runtimes. The overridden configs are maintained as of now to ensure
minimal changes.

---------

Co-authored-by: Oliver Tale-Yazdi <[email protected]>

Use non-zero weight limit in benchmarking `pallet_xcm::execute()` so the
given XCM actually executes.

On extrinsics/call, ensure local XCM execution is complete/successful.
Otherwise, fail the extrinsic so that state changes don't get committed
to the db.

Added regression tests that fail without the fix.

fixes #2237

---------

Co-authored-by: Adrian Catangiu <[email protected]>

Disallow reserve transfers that use teleportable fees if `(origin,
fees)` matches `XcmTeleportFilter`.

Add regression tests for filtering based on `XcmTeleportFilter` for both
`(limited_)reserve_transfer_assets()` and `(limited_)teleport_assets`
extrinsics.

## Motivation

`pallet-xcm` is the main user-facing interface for XCM functionality,
including assets manipulation functions like `teleportAssets()` and
`reserve_transfer_assets()` calls.

While `teleportAsset()` works both ways, `reserve_transfer_assets()`
works only for sending reserve-based assets to a remote destination and
beneficiary when the reserve is the _local chain_.

## Solution

This PR enhances `pallet_xcm::(limited_)reserve_withdraw_assets` to
support transfers when reserves are other chains.
This will allow complete, **bi-directional** reserve-based asset
transfers user stories using `pallet-xcm`.

Enables following scenarios:
- transferring assets with local reserve (was previously supported iff
asset used as fee also had local reserve - now it works in all cases),
- transferring assets with reserve on destination,
- transferring assets with reserve on remote/third-party chain (iff
assets and fees have same remote reserve),
- transferring assets with reserve different than the reserve of the
asset to be used as fees - meaning can be used to transfer random asset
with local/dest reserve while using DOT for fees on all involved chains,
even if DOT local/dest reserve doesn't match asset reserve,
- transferring assets with any type of local/dest reserve while using
fees which can be teleported between involved chains.

All of the above is done by pallet inner logic without the user having
to specify which scenario/reserves/teleports/etc. The correct scenario
and corresponding XCM programs are identified, and respectively, built
automatically based on runtime configuration of trusted teleporters and
trusted reserves.

#### Current limitations:
- while `fees` and "non-fee" `assets` CAN have different reserves (or
fees CAN be teleported), the remaining "non-fee" `assets` CANNOT, among
themselves, have different reserve locations (this is also implicitly
enforced by `MAX_ASSETS_FOR_TRANSFER=2`, but this can be safely
increased in the future).
- `fees` and "non-fee" `assets` CANNOT have **different remote**
reserves (this could also be supported in the future, but adds even more
complexity while possibly not being worth it - we'll see what the future
holds).

Fixes https://github.com/paritytech/polkadot-sdk/issues/1584
Fixes https://github.com/paritytech/polkadot-sdk/issues/2055

---------

Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Branislav Kontur <[email protected]>

We are introducing a new set of `XcmController` traits (final name yet
to be determined).
These traits are implemented by `pallet-xcm` and allows other pallets,
such as `pallet_contracts`, to rely on these traits instead of tight
coupling them to `pallet-xcm`.

Using only the existing Xcm traits would mean duplicating the logic from
`pallet-xcm` in these other pallets, which we aim to avoid. Our
objective is to ensure that when these APIs are called from
`pallet-contracts`, they produce the exact same outcomes as if called
directly from `pallet-xcm`.

The other benefits is that we can also expose return values to
`pallet-contracts` instead of just calling `pallet-xcm` dispatchable and
getting a `DispatchResult` back.

See traits integration in this PR
https://github.com/paritytech/polkadot-sdk/pull/1248, where the traits
are used as follow to define and implement `pallet-contracts` Config.
```rs
// Contracts config:
pub trait Config: frame_system::Config {
  // ...

  /// A type that exposes XCM APIs, allowing contracts to interact with other parachains, and
  /// execute XCM programs.
  type Xcm: xcm_executor::traits::Controller<
	  OriginFor<Self>,
	  <Self as frame_system::Config>::RuntimeCall,
	  BlockNumberFor<Self>,
  >;
}

// implementation
impl pallet_contracts::Config for Runtime {
        // ...

	type Xcm = pallet_xcm::Pallet<Self>;
}
```

---------

Co-authored-by: Alexander Theißen <[email protected]>
Co-authored-by: command-bot <>

As suggested by @ggwpez
(https://github.com/paritytech/polkadot-sdk/pull/2142#discussion_r1388145872),
remove the `VersionChecked` prefix from version checked migrations (but
leave `VersionUnchecked` prefixes)

---------

Co-authored-by: command-bot <>

closes https://github.com/paritytech/polkadot-sdk/issues/1882

## Breaking Changes

This PR introduces a new item to `pallet_balances::Config`:

```diff
trait Config {
++    type RuntimeFreezeReasons;
}
```

This value is only used to check it against `type MaxFreeze`. A similar
check has been added for `MaxHolds` against `RuntimeHoldReasons`, which
is already given to `pallet_balances`.

In all contexts, you should pass the real `RuntimeFreezeReasons`
generated by `construct_runtime` to `type RuntimeFreezeReasons`. Passing
`()` would also work, but it would imply that the runtime uses no
freezes at all.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

Combination of paritytech/polkadot#7005, its addon PR
paritytech/polkadot#7585 and its companion paritytech/cumulus#2433.

This PR introduces a new XcmFeesToAccount struct which implements the
`FeeManager` trait, and assigns this struct as the `FeeManager` in the
XCM config for all runtimes.

The struct simply deposits all fees handled by the XCM executor to a
specified account. In all runtimes, the specified account is configured
as the treasury account.

XCM __delivery__ fees are now being introduced (unless the root origin
is sending a message to a system parachain on behalf of the originating
chain).

# Note for reviewers

Most file changes are tests that had to be modified to account for the
new fees.
Main changes are in:
- cumulus/pallets/xcmp-queue/src/lib.rs <- To make it track the delivery
fees exponential factor
- polkadot/xcm/xcm-builder/src/fee_handling.rs <- Added. Has the
FeeManager implementation
- All runtime xcm_config files <- To add the FeeManager to the XCM
configuration

# Important note

After this change, instructions that create and send a new XCM (Query*,
Report*, ExportMessage, InitiateReserveWithdraw, InitiateTeleport,
DepositReserveAsset, TransferReserveAsset, LockAsset and RequestUnlock)
will require the corresponding origin account in the origin register to
pay for transport delivery fees, and the onward message will fail to be
sent if the origin account does not have the required amount. This
delivery fee is on top of what we already collect as tx fees in
pallet-xcm and XCM BuyExecution fees!

Wallet UIs that want to expose the new delivery fee can do so using the
formula:

```
delivery_fee_factor * (base_fee + encoded_msg_len * per_byte_fee)
```

where the delivery fee factor can be obtained from the corresponding
pallet based on which transport you are using (UMP, HRMP or bridges),
the base fee is a constant, the encoded message length from the message
itself and the per byte fee is the same as the configured per byte fee
for txs (i.e. `TransactionByteFee`).

---------

Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Giles Cope <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>

Two old functions should be deprecated and have their code altered in
line with capabilities of XCMv2 and above.

This means we can use the proper `Unlimited` form of weight limit rather
than guessing weight from the local chain.

`VersionedMigration` has become somewhat widely used for handling
version bumps in migrations the last few months.

It is currently behind the `experimental` feature flag, requiring every
pallet that writes a new migration with version bumps to set up the
`experimental` flag in their own Cargo.tomls, and also for every runtime
using these pallets to explicitly enable the `experimental` flag for
each pallet.

This is becoming quite verbose, and I can only see the number of pallets
requiring the experimental flag increasing for no other reason than
using what has become a commonly used feature.

Additionally, I'm writing migration docs and would like to avoid
stepping through how to use the `experimental` feature to get
`VersionedMigration` working.

Since the feature has been used in production for some time now without
any reported issues, is becoming commonly used and ready to advertise in
docs, I feel this is a good time to make it non-experimental.

* Rename `polkadot-parachain` to `polkadot-parachain-primitives`

While doing this it also fixes some last `rustdoc` issues and fixes
another Cargo warning related to `pallet-paged-list`.

* Fix compilation

* ".git/.scripts/commands/fmt/fmt.sh"

* Fix XCM docs

---------

Co-authored-by: command-bot <>

* restructure dispatch macro related exports

* moved Dispatchable to lib.rs

* fix .gitignore final newline

* ".git/.scripts/commands/fmt/fmt.sh"

* fix rustdocs

* wip

---------

Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: ordian <[email protected]>

* rename VersionedRuntimeUpgrade to VersionedMigration

* doc lint

* rename test filename

---------

Co-authored-by: Oliver Tale-Yazdi <[email protected]>

* Fix clippy check

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Autofix clippy

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Fix trivial

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* fmt

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* suppress warnings

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Quiet clippy 😌



Signed-off-by: Oliver Tale-Yazdi <[email protected]>

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Use same rustfmt.toml as Substrate

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* format format file

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Format with new config

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add Substrate Clippy config

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Print Clippy version in CI

Otherwise its difficult to reproduce locally.

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Make fmt happy

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Update node/core/pvf/src/error.rs

Co-authored-by: Tsvetomir Dimitrov <[email protected]>

* Update node/core/pvf/src/error.rs

Co-authored-by: Tsvetomir Dimitrov <[email protected]>

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Tsvetomir Dimitrov <[email protected]>

* move migration stuffs

* Apply suggestions from code review

Co-authored-by: Bastian Köcher <[email protected]>

* Fix test

* fix

* lint

* fix lint

* rm extra space

* fix lint

* PR review

* fixes

* use saturating_accrue in fn

* fix test

---------

Co-authored-by: Bastian Köcher <[email protected]>

This brings the `limited_teleport_assets` weight into line with the
`teleport_assets` weight.

* Add polkadot XCM benchmarks

* Add temp

* ".git/.scripts/commands/bench/bench.sh" xcm polkadot pallet_xcm_benchmarks::fungible

* ".git/.scripts/commands/bench/bench.sh" xcm polkadot pallet_xcm_benchmarks::generic

* Add weights to XCM on Polkadot

* Make CI fail on old files

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Update template

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add reserve_asset_deposited benchmark

* ".git/.scripts/commands/bench/bench.sh" xcm kusama pallet_xcm_benchmarks::generic

* Update weights

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Change initiate_reserve_deposit in runtime weights

* Update weights

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Remove trusted reserves from runtimes

* Fix pallet-xcm-benchmarks mock

* Fix test

* Change pallet xcm weigher in kusama

* Fix

* Remove merge conflict artifact

* Remove initiate_reserve_withdraw from generic benchmarks

* Add missing implementation to XCM benchmark

* Fix failing karura test

* Remove dbg!

Co-authored-by: Keith Yeung <[email protected]>

* Fix fmt

* Revert "Fix fmt"

This reverts commit 676f2d8db07d7427750c79f95494d4988d06fda5.

* Fix fmt

* Remove duplicated template code

* Add back part of the template

* ".git/.scripts/commands/bench-vm/bench-vm.sh" xcm polkadot pallet_xcm_benchmarks::fungible

* Don't skip reserve asset deposited benchmark

* Remove call to non-generated benchmark yet

* Underscore unused parameter

* Skip not supported benchmarks and hardcode value

* Remove ReserveAssetDeposited benchmark

* ".git/.scripts/commands/bench-vm/bench-vm.sh" xcm polkadot pallet_xcm_benchmarks::fungible

* Add back ReserveAssetDeposited

* ".git/.scripts/commands/bench-vm/bench-vm.sh" xcm polkadot pallet_xcm_benchmarks::fungible

* Use default benchmark for ReserveAssetDeposited

* Add missing parameter

* Revert reserve asset deposited benchmark

* ".git/.scripts/commands/bench-vm/bench-vm.sh" xcm kusama pallet_xcm_benchmarks::fungible

* ".git/.scripts/commands/bench-vm/bench-vm.sh" xcm westend pallet_xcm_benchmarks::fungible

* ".git/.scripts/commands/bench/bench.sh" xcm rococo pallet_xcm_benchmarks::fungible

* Add 'real' benchmarks

* Add TrustedReserve to actual XcmConfig

* Add TrustedReserve to actual XcmConfig (fix)

* Whitelist from benchmarking XCM storage keys read each block (#6871)

* Whitelist from benchmarking XCM storage keys read each block

* ".git/.scripts/commands/bench/bench.sh" runtime polkadot pallet_xcm

* ".git/.scripts/commands/bench/bench.sh" runtime polkadot pallet_xcm

* ".git/.scripts/commands/bench/bench.sh" runtime westend pallet_xcm

* ".git/.scripts/commands/bench/bench.sh" runtime rococo pallet_xcm

* Remove XcmPallet SupportedVersion from the benchmark whitelist

* ".git/.scripts/commands/bench/bench.sh" runtime polkadot pallet_xcm

* ".git/.scripts/commands/bench/bench.sh" runtime kusama pallet_xcm

* ".git/.scripts/commands/bench/bench.sh" runtime westend pallet_xcm

* ".git/.scripts/commands/bench/bench.sh" runtime rococo pallet_xcm

* WIP

* Add necessary traits, remove unnecessary whitelisted keys

* Fix tests

* Remove unused file

* Remove unused import

---------

Co-authored-by: command-bot <>

* ".git/.scripts/commands/bench/bench.sh" xcm kusama pallet_xcm_benchmarks::fungible

* ".git/.scripts/commands/bench/bench.sh" xcm kusama pallet_xcm_benchmarks::fungible

* ".git/.scripts/commands/bench/bench.sh" xcm kusama pallet_xcm_benchmarks::fungible

* ".git/.scripts/commands/bench/bench.sh" xcm rococo pallet_xcm_benchmarks::fungible

* ".git/.scripts/commands/bench/bench.sh" xcm westend pallet_xcm_benchmarks::fungible

* Fix spellchecker issues

* Remove unused migration code

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Keith Yeung <[email protected]>

* replace Index for Nonce

* remove extra Nonce

* update lockfile for {"substrate"}

---------

Co-authored-by: parity-processbot <>

Moves `Block` to `frame_system` instead of `construct_runtime` and removes `Header` and `BlockNumber` (#7431)

* Companion for substrate

* Minor update

* Formatting

* Fixes for cumulus

* Fixes tests in polkadot-runtime-parachains

* Minor update

* Removes unused import

* Fixes tests in polkadot-runtime-common

* Minor fix

* Update roadmap/implementers-guide/src/runtime/configuration.md

Co-authored-by: ordian <[email protected]>

* ".git/.scripts/commands/fmt/fmt.sh"

* update lockfile for {"substrate"}

---------

Co-authored-by: ordian <[email protected]>
Co-authored-by: command-bot <>

* fix migrations

* use society versioned runtime upgrade

* simplify usage of versionedruntimeupgrade

* use society experimental feature

* improve usage of experimental flag

* doc comment

* Merge branch 'master' of github.com:paritytech/polkadot into liam-fix-migrations

* Revert "Merge branch 'master' of github.com:paritytech/polkadot into liam-fix-migrations"

This reverts commit 41ab0621811ead11b0a7f91338b0895208feef77.

* doc comment

* westend experimental feature

* Revert "westend experimental feature"

This reverts commit 42f4f1b76655ef509a92c324d18d635a1b913dcb.

* feature gate experimental xcm migration

* update lockfile for {"substrate"}

---------

Co-authored-by: parity-processbot <>

* GenesisBuild<T,I> deprecated. BuildGenesisConfig added

* fmt

* fixes

* more fixes

* more fixes

* fixes

* update lockfile for {"substrate"}

* fix

---------

Co-authored-by: parity-processbot <>

* Implement AliasOrigin processing in XCVM

* add builder types and first test

* switch to more general builder types

* clone target for RemovePrefixAccountId32

* change builder types

* change AliasForeignAccountId32 and add test for AliasCase

* add Aliasers type to xcm configs

* add benchmark

* benchmark fix

* add benchmark function for runtimes

* fix alias_origin result types

* fix benchmark test

* add runtime-benchmarks feature in pallet-xcm-benchmarks

* fmt

* remove AliasCase, add test and fmt

* address feedback

* ".git/.scripts/commands/bench/bench.sh" xcm kusama pallet_xcm_benchmarks::generic

* ".git/.scripts/commands/bench/bench.sh" xcm westend pallet_xcm_benchmarks::generic

* ".git/.scripts/commands/bench/bench.sh" xcm rococo pallet_xcm_benchmarks::generic

* address feedback

* lock

* ".git/.scripts/commands/bench/bench.sh" xcm kusama pallet_xcm_benchmarks::generic

* ".git/.scripts/commands/bench/bench.sh" xcm westend pallet_xcm_benchmarks::generic

* ".git/.scripts/commands/bench/bench.sh" xcm rococo pallet_xcm_benchmarks::generic

* change doc

* fmt

---------

Co-authored-by: Just van Stam <[email protected]>
Co-authored-by: Just van Stam <[email protected]>
Co-authored-by: command-bot <>

* Introduce an extensible location-to-hash-account

* Convert becomes RevFallRefConvert

* Use ConvertLocation trait

* Remove Convert usage

* Builds

* Fix warnings

* Remove unused types

* Bump lock

* No need for aliasing

* Remove unused

* Deprecate legacy conversion

* Fixes

* Fixes

* Update Cargo.toml

Co-authored-by: Muharem Ismailov <[email protected]>

* Update xcm/xcm-builder/src/location_conversion.rs

Co-authored-by: Liam Aharon <[email protected]>

* Update xcm/xcm-builder/src/location_conversion.rs

Co-authored-by: Liam Aharon <[email protected]>

* Update xcm/xcm-builder/src/location_conversion.rs

Co-authored-by: Liam Aharon <[email protected]>

* Update xcm/xcm-builder/src/location_conversion.rs

Co-authored-by: Liam Aharon <[email protected]>

* Update xcm/xcm-builder/src/location_conversion.rs

Co-authored-by: Liam Aharon <[email protected]>

* Update xcm/xcm-builder/src/location_conversion.rs

Co-authored-by: Liam Aharon <[email protected]>

---------

Co-authored-by: Muharem Ismailov <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>

* Move XCM query functionality to trait

* Fix tests

* Add PayOverXcm implementation

* fix the PayOverXcm trait to compile

* moved doc comment out of trait implmeentation and to the trait

* PayOverXCM documentation

* Change documentation a bit

* Added empty benchmark methods implementation and changed docs

* update PayOverXCM to convert AccountIds to MultiLocations

* Implement benchmarking method

* Change v3 to latest

* Descend origin to an asset sender (#6970)

* descend origin to an asset sender

* sender as tuple of dest and sender

* Add more variants to the QueryResponseStatus enum

* Change Beneficiary to Into<[u8; 32]>

* update PayOverXcm to return concrete errors and use AccountId as sender

* use polkadot-primitives for AccountId

* fix dependency to use polkadot-core-primitives

* force Unpaid instruction to the top of the instructions list

* modify report_outcome to accept interior argument

* use new_query directly for building final xcm query, instead of report_outcome

* fix usage of new_query to use the XcmQueryHandler

* fix usage of new_query to use the XcmQueryHandler

* tiny method calling fix

* xcm query handler (#7198)

* drop redundant query status

* rename ReportQueryStatus to OuterQueryStatus

* revert rename of QueryResponseStatus

* update mapping

* Update xcm/xcm-builder/src/pay.rs

Co-authored-by: Gavin Wood <[email protected]>

* Updates

* Docs

* Fix benchmarking stuff

* Destination can be determined based on asset_kind

* Tweaking API to minimise clones

* Some repotting and docs

---------

Co-authored-by: Anthony Alaribe <[email protected]>
Co-authored-by: Muharem Ismailov <[email protected]>
Co-authored-by: Anthony Alaribe <[email protected]>
Co-authored-by: Gavin Wood <[email protected]>

* pallets: implement Default for GenesisConfig in no_std

This change is follow-up of: https://github.com/paritytech/substrate/pull/14108

It is a step towards: https://github.com/paritytech/substrate/issues/13334

* Cargo.lock updated

* update lockfile for {"substrate"}

---------

Co-authored-by: parity-processbot <>

* Tools for unique topic references

* Formatting

* Naming

* Repot into routing.rs.

* More things done

* Universal Exporter supports topic-as-reference

* Some tests for the topic routing

* More tests

* Paid bridge tests

* Add message ID to sending events

* Formatting

* fix and integrate into test nets

* Move DenyThenTry and friend from Cumulus

* Append SetTopic rather than prepend

* Docs

* Docs

* Work with new ProcessMessage ID API

* Formatting

* Fix build

* Fixes

* Formatting

* Update xcm/xcm-builder/src/barriers.rs

Co-authored-by: Francisco Aguirre <[email protected]>

* Update xcm/xcm-builder/src/routing.rs

Co-authored-by: Francisco Aguirre <[email protected]>

* Docs

* Rename message_hash

* Formatting

* ".git/.scripts/commands/fmt/fmt.sh"

* Rename

* Another Rename

* ".git/.scripts/commands/fmt/fmt.sh"

* ".git/.scripts/commands/fmt/fmt.sh"

* Update xcm/xcm-builder/src/routing.rs

Co-authored-by: Keith Yeung <[email protected]>

---------

Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Keith Yeung <[email protected]>

* Companion: Substrate#13869

https://github.com/paritytech/substrate/pull/13869

* update lockfile for {"substrate"}

* ".git/.scripts/commands/fmt/fmt.sh"

---------

Co-authored-by: parity-processbot <>

* Try-runtime proper return types

* update

* oops

* use ensure

* update lockfile for {"substrate"}

---------

Co-authored-by: parity-processbot <>

* Yeah

* Fix all the migrations for Kusama & Polkadot

---------

Co-authored-by: Liam Aharon <[email protected]>

* Stop weighing XCM execution on pallet-xcm's send extrinsic

* Add missing instruction to transfer extrinsics' weight in pallet-xcm