- Jan 31, 2024
-
-
Branislav Kontur authored
[frame] `#[pallet::composite_enum]` improved variant count handling + removed `pallet_balances`'s `MaxHolds` config (#2657) I started this investigation/issue based on @liamaharon question [here](https://github.com/paritytech/polkadot-sdk/pull/1801#discussion_r1410452499). ## Problem The `pallet_balances` integrity test should correctly detect that the runtime has correct distinct `HoldReasons` variant count. I assume the same situation exists for RuntimeFreezeReason. It is not a critical problem, if we set `MaxHolds` with a sufficiently large value, everything should be ok. However, in this case, the integrity_test check becomes less useful. **Situation for "any" runtime:** - `HoldReason` enums from different pallets: ```rust /// from pallet_nis #[pallet::composite_enum] pub enum HoldReason { NftReceipt, } /// from pallet_preimage #[pallet::composite_enum] pub enum HoldReason { Preimage, } // from pallet_state-trie-migration #[pallet::composite_enum] pub enum HoldReason { SlashForContinueMigrate, SlashForMigrateCustomTop, SlashForMigrateCustomChild, } ``` - generated `RuntimeHoldReason` enum looks like: ```rust pub enum RuntimeHoldReason { #[codec(index = 32u8)] Preimage(pallet_preimage::HoldReason), #[codec(index = 38u8)] Nis(pallet_nis::HoldReason), #[codec(index = 42u8)] StateTrieMigration(pallet_state_trie_migration::HoldReason), } ``` - composite enum `RuntimeHoldReason` variant count is detected as `3` - we set `type MaxHolds = ConstU32<3>` - `pallet_balances::integrity_test` is ok with `3`(at least 3) However, the real problem can occur in a live runtime where some functionality might stop working. This is due to a total of 5 distinct hold reasons (for pallets with multi-instance support, it is even more), and not all of them can be used because of an incorrect `MaxHolds`, which is deemed acceptable according to the `integrity_test`: ``` // pseudo-code - if we try to call all of these: T::Currency::hold(&pallet_nis::HoldReason::NftReceipt.into(), &nft_owner, deposit)?; T::Currency::hold(&pallet_preimage::HoldReason::Preimage.into(), &nft_owner, deposit)?; T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForContinueMigrate.into(), &nft_owner, deposit)?; // With `type MaxHolds = ConstU32<3>` these two will fail T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomTop.into(), &nft_owner, deposit)?; T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomChild.into(), &nft_owner, deposit)?; ``` ## Solutions A macro `#[pallet::*]` expansion is extended of `VariantCount` implementation for the `#[pallet::composite_enum]` enum type. This expansion generates the `VariantCount` implementation for pallets' `HoldReason`, `FreezeReason`, `LockId`, and `SlashReason`. Enum variants must be plain enum values without fields to ensure a deterministic count. The composite runtime enum, `RuntimeHoldReason` and `RuntimeFreezeReason`, now sets `VariantCount::VARIANT_COUNT` as the sum of pallets' enum `VariantCount::VARIANT_COUNT`: ```rust #[frame_support::pallet(dev_mode)] mod module_single_instance { #[pallet::composite_enum] pub enum HoldReason { ModuleSingleInstanceReason1, ModuleSingleInstanceReason2, } ... } #[frame_support::pallet(dev_mode)] mod module_multi_instance { #[pallet::composite_enum] pub enum HoldReason<I: 'static = ()> { ModuleMultiInstanceReason1, ModuleMultiInstanceReason2, ModuleMultiInstanceReason3, } ... } impl self::sp_api_hidden_includes_construct_runtime::hidden_include::traits::VariantCount for RuntimeHoldReason { const VARIANT_COUNT: u32 = 0 + module_single_instance::HoldReason::VARIANT_COUNT + module_multi_instance::HoldReason::<module_multi_instance::Instance1>::VARIANT_COUNT + module_multi_instance::HoldReason::<module_multi_instance::Instance2>::VARIANT_COUNT + module_multi_instance::HoldReason::<module_multi_instance::Instance3>::VARIANT_COUNT; } ``` In addition, `MaxHolds` is removed (as suggested [here](https://github.com/paritytech/polkadot-sdk/pull/2657#discussion_r1443324573)) from `pallet_balances`, and its `Holds` are now bounded to `RuntimeHoldReason::VARIANT_COUNT`. Therefore, there is no need to let the runtime specify `MaxHolds`. ## For reviewers Relevant changes can be found here: - `substrate/frame/support/procedural/src/lib.rs` - `substrate/frame/support/procedural/src/pallet/parse/composite.rs` - `substrate/frame/support/procedural/src/pallet/expand/composite.rs` - `substrate/frame/support/procedural/src/construct_runtime/expand/composite_helper.rs` - `substrate/frame/support/procedural/src/construct_runtime/expand/hold_reason.rs` - `substrate/frame/support/procedural/src/construct_runtime/expand/freeze_reason.rs` - `substrate/frame/support/src/traits/misc.rs` And the rest of the files is just about removed `MaxHolds` from `pallet_balances` ## Next steps Do the same for `MaxFreezes` https://github.com/paritytech/polkadot-sdk/issues/2997. --------- Co-authored-by: command-bot <> Co-authored-by:
Bastian Köcher <[email protected]> Co-authored-by:
Dónal Murray <[email protected]> Co-authored-by:
gupnik <[email protected]>
-
- Jan 26, 2024
-
-
Liam Aharon authoredRelated https://github.com/paritytech/polkadot-sdk/issues/3032 --- Using https://github.com/liamaharon/cargo-workspace-version-tools/ `cargo run -- sync --path ../polkadot-sdk` --------- Signed-off-by:
Oliver Tale-Yazdi <[email protected]> Co-authored-by:
-
- Jan 24, 2024
-
-
dependabot[bot] authored
Bumps [docify](https://github.com/sam0x17/docify) from 0.2.6 to 0.2.7. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/sam0x17/docify/releases">docify's releases</a>.</em></p> <blockquote> <h2>v0.2.7</h2> <p>updates toml to 0.8</p> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/sam0x17/docify/commit/a6bb26159613db316c14392215f08479d60093e1"><code>a6bb261</code></a> bump to v0.2.7</li> <li><a href="https://github.com/sam0x17/docify/commit/22b6e0cbedb47cf86dd8e9b394557508a6af20d0"><code>22b6e0c</code></a> Merge pull request <a href="https://redirect.github.com/sam0x17/docify/issues/24">#24</a> from kayabaNerve/main</li> <li><a href="https://github.com/sam0x17/docify/commit/19d3cd625d3d4f699d1aeeb6d08a8408b495724b"><code>19d3cd6</code></a> toml 0.8</li> <li>See full diff in <a href="https://github.com/sam0x17/docify/compare/v0.2.6...v0.2.7">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by:
dependabot[bot] <[email protected]> Co-authored-by:
dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
-
- Jan 22, 2024
-
-
joe petrowski authored
Clean up all the old syntax. --------- Co-authored-by: command-bot <> Co-authored-by:
Nikhil Gupta <[email protected]> Co-authored-by:
Maksym H <[email protected]>
-
- Dec 20, 2023
-
-
Dónal Murray authored
Many clippy lints usually enforced by `-Dcomplexity` and `-Dcorrectness` are not caught by CI as they are gated by `features`, like `runtime-benchmarks`, while the clippy CI job runs with only the default features for all targets. This PR also adds a CI step to run clippy with `--all-features` to ensure the code quality is maintained behind feature gates from now on. To improve local development, clippy lints are downgraded to warnings, but they still will result in an error at CI due to the `-Dwarnings` rustflag. --------- Co-authored-by:Liam Aharon <[email protected]>
-
- Dec 18, 2023
-
-
Branislav Kontur authored
This PR contains just a few clippy fixes and nits, which are, however, relaxed by workspace clippy settings here: https://github.com/paritytech/polkadot-sdk/blob/master/Cargo.toml#L483-L506 --------- Co-authored-by:
Dmitry Sinyavin <[email protected]> Co-authored-by:
ordian <[email protected]> Co-authored-by: command-bot <> Co-authored-by:
-
- Dec 13, 2023
-
-
Squirrel authored
We currently use a bit of a hack in `.cargo/config` to make sure that clippy isn't too annoying by specifying the list of lints. There is now a stable way to define lints for a workspace. The only down side is that every crate seems to have to opt into this so there's a *few* files modified in this PR. Dependencies: - [x] PR that upgrades CI to use rust 1.74 is merged. --------- Co-authored-by:
joe petrowski <[email protected]> Co-authored-by:
Branislav Kontur <[email protected]> Co-authored-by:
-
- Dec 12, 2023
-
-
Ross Bulat authored
Partially Addresses #2500 Adds a `deprecate_controller_batch` call to the staking pallet that is callable by `Root` and `StakingAdmin`. To be used for controller account deprecation and removed thereafter. Adds `MaxControllersDeprecationBatch` pallet constant that defines max possible deprecations per call. - [x] Add `deprecate_controller_batch` call, and `MaxControllersInDeprecationBatch` constant. - [x] Add tests, benchmark, weights. Tests that weight is only consumed if unique pair. - [x] Adds `StakingAdmin` origin to staking's `AdminOrigin` type in westend runtime. - [x] Determined that worst case 5,900 deprecations does fit into `maxBlock` `proofSize` and `refTime` in both normal and operational thresholds, meaning we can deprecate all controllers for each network in one call. ## Block Weights By querying `consts.system.blockWeights` we can see that the `deprecate_controller_batch` weights fit within the `normal` threshold on Polkadot. #### `controller_deprecation_batch` where i = 5900: #### Ref time: 69,933,325,300 #### Proof size: 21,040,390 ### Polkadot ``` // consts.query.blockWeights maxBlock: { refTime: 2,000,000,000,000 proofSize: 18,446,744,073,709,551,615 } normal: { maxExtrinsic: { refTime: 1,479,873,955,000 proofSize: 13,650,590,614,545,068,195 } maxTotal: { refTime: 1,500,000,000,000 proofSize: 13,835,058,055,282,163,711 } } ``` ### Kusama ``` // consts.query.blockWeights maxBlock: { refTime: 2,000,000,000,000 proofSize: 18,446,744,073,709,551,615 } normal: { maxExtrinsic: { refTime: 1,479,875,294,000 proofSize: 13,650,590,614,545,068,195 } maxTotal: { refTime: 1,500,000,000,000 proofSize: 13,835,058,055,282,163,711 } } ``` --------- Co-authored-by: command-bot <> Co-authored-by:Gonçalo Pestana <[email protected]>
-
- Dec 01, 2023
-
-
Liam Aharon authored
Using taplo, fixes all our broken and inconsistent toml formatting and adds CI to keep them tidy. If people want we can customise the format rules as described here https://taplo.tamasfe.dev/configuration/formatter-options.html @ggwpez , I suggest zepter is used only for checking features are propagated, and leave formatting for taplo to avoid duplicate work and conflicts. TODO - [x] Use `exclude = [...]` syntax in taplo file to ignore zombienet tests instead of deleting the dir --------- Signed-off-by:
-
- Nov 30, 2023
-
-
Kian Paimani authored
This PR introduces the new crate `developer_hub` into the polkadot-sdk repo. The vision for the developer-hub crate is detailed in [this document](https://docs.google.com/document/d/1XLLkFNE8v8HLvZpI2rzsa8N2IN1FcKntc8q-Sc4xBAk/edit?usp=sharing). <img width="1128" alt="Screenshot 2023-11-02 at 10 45 48" src="https://github.com/paritytech/polkadot-sdk/assets/5588131/1e12b60f-fef5-42c4-8503-a3ba234077c3"> Other than adding the new crate, it also does the following: * Remove the `substrate` crate, as there is now a unique umbrella crate for multiple things in `developer_hub::polkadot_sdk`. * (backport candidate) A minor change to `frame-support` macros that allows `T::RuntimeOrigin` to also be acceptable as the origin type. * (backport candidate) A minor change to `frame-system` that allows us to deposit events at genesis because now the real genesis config is generated via wasm, and we can safely assume `cfg!(feature = "std")` means only testing. related to #62. * (backport candidate) Introduces a small `read_events_for_pallet` to `frame_system` for easier event reading in tests. * From https://github.com/paritytech/polkadot-sdk-docs/issues/31, it takes action on improving the `pallet::call` docs. * From https://github.com/paritytech/polkadot-sdk-docs/issues/31, it takes action on improving the `UncheckedExtrinsic` docs. ## Way Forward First, a version of this is deployed temporarily [here](https://blog.kianenigma.nl/polkadot-sdk/developer_hub/index.html). I will keep it up to date on a daily basis. ### This Pull Request I see two ways forward: 1. We acknowledge that everything in `developer-hub` is going to be WIP, and merge this asap. We should not yet use links to this crate anywhere. 2. We make this be the feature branch, make PRs against this, and either gradually backport it, or only merge to master once it is done. I am personally in favor of option 1. If we stick to option 2, we need a better way to deploy a staging version of this to gh-pages. ### Issue Tracking The main issues related to the future of `developer_hub` are: - https://github.com/paritytech/polkadot-sdk-docs/issues/31 - https://github.com/paritytech/polkadot-sdk-docs/issues/4 - https://github.com/paritytech/polkadot-sdk-docs/issues/26 - https://github.com/paritytech/polkadot-sdk-docs/issues/32 - https://github.com/paritytech/polkadot-sdk-docs/issues/36 ### After This Pull Request - [ ] create a redirect for https://paritytech.github.io/polkadot-sdk/master/substrate/ - [x] analytics - [ ] link checker - [ ] the matter of publishing, and how all of these relative links for when we do, that is still an open question. There is section on this in the landing page. - [ ] updated https://paritytech.github.io/ --------- Co-authored-by:
Juan Girini <[email protected]> Co-authored-by:
bader y <[email protected]> Co-authored-by:
Sebastian Kunert <[email protected]> Co-authored-by:
James Wilson <[email protected]> Co-authored-by:
Michal Kucharczyk <[email protected]>
-
- Nov 24, 2023
-
-
Ankan authored
The FastUnstake pallet tests were previously directly modifying storage items in the pallet-staking to alter exposure. However, due to the introduction of the [new paged exposure feature](https://github.com/paritytech/polkadot-sdk/pull/1189) these tests were not testing against correct storage items. This issue resulted in a bug that I didn't catch, which has been addressed in [this fix](https://github.com/paritytech/polkadot-sdk/pull/2369). This PR introduces a modification to how the pallet-fast-unstake handles exposure. It now utilizes `pallet-staking::EraInfo` to set or mutate Exposures.
-
- Nov 01, 2023
-
-
Ankan authored
helps https://github.com/paritytech/polkadot-sdk/issues/439. closes https://github.com/paritytech/polkadot-sdk/issues/473. PR link in the older substrate repository: https://github.com/paritytech/substrate/pull/13498. # Context Rewards payout is processed today in a single block and limited to `MaxNominatorRewardedPerValidator`. This number is currently 512 on both Kusama and Polkadot. This PR tries to scale the nominators payout to an unlimited count in a multi-block fashion. Exposures are stored in pages, with each page capped to a certain number (`MaxExposurePageSize`). Starting out, this number would be the same as `MaxNominatorRewardedPerValidator`, but eventually, this number can be lowered through new runtime upgrades to limit the rewardeable nominators per dispatched call instruction. The changes in the PR are backward compatible. ## How payouts would work like after this change Staking exposes two calls, 1) the existing `payout_stakers` and 2) `payout_stakers_by_page`. ### payout_stakers This remains backward compatible with no signature change. If for a given era a validator has multiple pages, they can call `payout_stakers` multiple times. The pages are executed in an ascending sequence and the runtime takes care of preventing double claims. ### payout_stakers_by_page Very similar to `payout_stakers` but also accepts an extra param `page_index`. An account can choose to payout rewards only for an explicitly passed `page_index`. **Lets look at an example scenario** Given an active validator on Kusama had 1100 nominators, `MaxExposurePageSize` set to 512 for Era e. In order to pay out rewards to all nominators, the caller would need to call `payout_stakers` 3 times. - `payout_stakers(origin, stash, e)` => will pay the first 512 nominators. - `payout_stakers(origin, stash, e)` => will pay the second set of 512 nominators. - `payout_stakers(origin, stash, e)` => will pay the last set of 76 nominators. ... - `payout_stakers(origin, stash, e)` => calling it the 4th time would return an error `InvalidPage`. The above calls can also be replaced by `payout_stakers_by_page` and passing a `page_index` explicitly. ## Commission note Validator commission is paid out in chunks across all the pages where each commission chunk is proportional to the total stake of the current page. This implies higher the total stake of a page, higher will be the commission. If all the pages of a validator's single era are paid out, the sum of commission paid to the validator across all pages should be equal to what the commission would have been if we had a non-paged exposure. ### Migration Note Strictly speaking, we did not need to bump our storage version since there is no migration of storage in this PR. But it is still useful to mark a storage upgrade for the following reasons: - New storage items are introduced in this PR while some older storage items are deprecated. - For the next `HistoryDepth` eras, the exposure would be incrementally migrated to its corresponding paged storage item. - Runtimes using staking pallet would strictly need to wait at least `HistoryDepth` eras with current upgraded version (14) for the migration to complete. At some era `E` such that `E > era_at_which_V14_gets_into_effect + HistoryDepth`, we will upgrade to version X which will remove the deprecated storage items. In other words, it is a strict requirement that E<sub>x</sub> - E<sub>14</sub> > `HistoryDepth`, where E<sub>x</sub> = Era at which deprecated storages are removed from runtime, E<sub>14</sub> = Era at which runtime is upgraded to version 14. - For Polkadot and Kusama, there is a [tracker ticket](https://github.com/paritytech/polkadot-sdk/issues/433) to clean up the deprecated storage items. ### Storage Changes #### Added - ErasStakersOverview - ClaimedRewards - ErasStakersPaged #### Deprecated The following can be cleaned up after 84 eras which is tracked [here](https://github.com/paritytech/polkadot-sdk/issues/433). - ErasStakers. - ErasStakersClipped. - StakingLedger.claimed_rewards, renamed to StakingLedger.legacy_claimed_rewards. ### Config Changes - Renamed MaxNominatorRewardedPerValidator to MaxExposurePageSize. ### TODO - [x] Tracker ticket for cleaning up the old code after 84 eras. - [x] Add companion. - [x] Redo benchmarks before merge. - [x] Add Changelog for pallet_staking. - [x] Pallet should be configurable to enable/disable paged rewards. - [x] Commission payouts are distributed across pages. - [x] Review documentation thoroughly. - [x] Rename `MaxNominatorRewardedPerValidator` -> `MaxExposurePageSize`. - [x] NMap for `ErasStakersPaged`. - [x] Deprecate ErasStakers. - [x] Integrity tests. ### Followup issues [Runtime api for deprecated ErasStakers storage item](https://github.com/paritytech/polkadot-sdk/issues/426) --------- Co-authored-by:
Javier Viola <[email protected]> Co-authored-by:
Ross Bulat <[email protected]> Co-authored-by: command-bot <>
-
- Oct 27, 2023
-
-
Sam Johnson authored
Updates `docify` to 0.2.6, which fixes a bug that was preventing nesting `#[docify::export]` within sub-items of items that already have `#[docify::export]` attached to them from working properly. Release notes here: https://github.com/sam0x17/docify/releases/tag/v0.2.6 cc @ggwpez @Kianenigma
-
Sam Johnson authored
Updates `docify` to 0.2.5, which fixes some indentation bugs and adds the new `#[docify::export_content]` attribute which can be used like regular `#[docify::export]` but will only export the _underlying contents_ of the item it is attached to, if applicable (otherwise it just behaves exactly like `#[docify::export]`). Release notes here: https://github.com/sam0x17/docify/releases/tag/v0.2.5 cc @Kianenigma
-
- Oct 24, 2023
-
-
Kian Paimani authored
closes https://github.com/paritytech/polkadot-sdk/issues/1882 ## Breaking Changes This PR introduces a new item to `pallet_balances::Config`: ```diff trait Config { ++ type RuntimeFreezeReasons; } ``` This value is only used to check it against `type MaxFreeze`. A similar check has been added for `MaxHolds` against `RuntimeHoldReasons`, which is already given to `pallet_balances`. In all contexts, you should pass the real `RuntimeFreezeReasons` generated by `construct_runtime` to `type RuntimeFreezeReasons`. Passing `()` would also work, but it would imply that the runtime uses no freezes at all. --------- Signed-off-by:
-
- Oct 20, 2023
-
-
Bastian Köcher authored
The `xcm` crate was renamed to `staging-xcm` to be able to publish it to crates.io as someone as squatted `xcm`. The problem with this rename is that the `TypeInfo` includes the crate name which ultimately lands in the metadata. The metadata is consumed by downstream users like `polkadot-js` or people building on top of `polkadot-js`. These people are using the entire `path` to find the type in the type registry. Thus, their code would break as the type path would now be [`staging_xcm`, `VersionedXcm`] instead of [`xcm`, `VersionedXcm`]. This pull request fixes this by renaming the path segment `staging_xcm` to `xcm`. This requires: https://github.com/paritytech/scale-info/pull/197 --------- Co-authored-by:Francisco Aguirre <[email protected]>
-
- Oct 01, 2023
-
-
Kian Paimani authored
Moving a few pallets to the latest and greatest `derive_impl` to give it a try. Part of #171 --------- Co-authored-by:
Adrian Catangiu <[email protected]> Co-authored-by:
Keith Yeung <[email protected]>
-
- Sep 29, 2023
-
-
Sebastian Kunert authored
-
- Sep 20, 2023
-
-
Sam Johnson authored
Upgrades to docify v0.2.4 which adds support for exporting trait and impl items in addition to regular items. This fixes @liamaharon's https://github.com/sam0x17/docify/issues/9 issue. See the release notes for more information: https://github.com/sam0x17/docify/releases/tag/v0.2.4
-
- Sep 15, 2023
-
-
Sam Johnson authored
Upgrades to docify v0.2.3, which includes a fix for https://github.com/sam0x17/docify/issues/7 and full support for multi-byte UTF-8 characters
-
- Aug 29, 2023
-
-
Oliver Tale-Yazdi authored* Fix build profiles Closes https://github.com/paritytech/polkadot-sdk/issues/1155 Signed-off-by:
-
- Aug 25, 2023
-
-
Alexander authoredSigned-off-by:alvicsam <[email protected]>
-
- Aug 24, 2023
-
-
juangirini authored
* make reexports private * make reexports private 2 * make reexports private for runtime-benchmarking * make reexports private for try-runtime * fix for try-runtime * make reexports private for tests * fmt * make reexports private for tests * make reexports private for experimental * fix beefy * fix ui test * fix ui test * fix benches * ".git/.scripts/commands/fmt/fmt.sh" * fix contracts use * wip * wip * do not reexport sp_api::metadata_ir * fix CI checks * fix support tests * ".git/.scripts/commands/fmt/fmt.sh" * Update frame/support/src/lib.rs Co-authored-by:
-
- Aug 23, 2023
-
-
Oliver Tale-Yazdi authored
* CI: Add feature sorting check Signed-off-by:
-
- Aug 10, 2023
-
-
Gonçalo Pestana authored
* Implements dynamic nominations per nominator * Adds SnapshotBounds and ElectionSizeTracker * Changes the ElectionDataProvider interface to receive ElectionBounds as input * Implements get_npos_voters with ElectionBounds * Implements get_npos_targets with ElectionBounds * Adds comments * tests * Truncates nomninations that exceed nominations quota; Old tests passing * Uses DataProviderBounds and ElectionBounds (to continue) * Finishes conversions - tests passing * Refactor staking in babe mocks * Replaces MaxElectableTargets and MaxElectingVoters with ElectionBounds; Adds more tests * Fixes nits; node compiling * bechmarks * removes nomination_quota extrinsic to request the nomination quota * Lazy quota check, ie. at nominate time only * remove non-working test (for now) * tests lazy nominations quota when quota is lower than current number of nominated targets * Adds runtime API and custom RPC call for clients to query the nominations quota for a given balance * removes old rpc * Cosmetic touches * All mocks working * Fixes benchmarking mocks * nits * more tests * renames trait methods * nit * ".git/.scripts/commands/fmt/fmt.sh" * Fix V2 PoV benchmarking (#13485) * Bump default 'additional_trie_layers' to two The default here only works for extremely small runtimes, which have no more than 16 storage prefices. This is changed to a "sane" default of 2, which is save for runtimes with up to 4096 storage prefices (eg StorageValue). Signed-off-by:
Koute <[email protected]> * Also print the backtrace of `send()` call * Switch from `backtrace` crate to `std::backtrace` * Remove outdated `backtrace` dependency * Remove `backtrace` from `Cargo.lock` --------- Co-authored-by:
Kian Paimani <[email protected]> * Update frame/staking/src/pallet/impls.rs Co-authored-by:
Davide Galassi <[email protected]> Co-authored-by:
yjh <[email protected]> Co-authored-by:
Dmitry Markin <[email protected]> Co-authored-by:
Anthony Lazam <[email protected]> Co-authored-by:
André Silva <[email protected]> Co-authored-by:
Piotr Mikołajczyk <[email protected]> Co-authored-by:
-
- Aug 05, 2023
-
-
Oliver Tale-Yazdi authored
* Use relative docify paths Bumping the docify version and using relative paths is needed for the monorepo to find the test files in the new workspace. Signed-off-by:
Sam Johnson <[email protected]>
-
- Aug 01, 2023
-
-
Oliver Tale-Yazdi authored
* Fix std, runtime-benchmarks and try-runtime features zepter lint propagate-feature --feature try-runtime --left-side-feature-missing=ignore --workspace --fix --feature-enables-dep="try-runtime:frame-try-runtime" zepter lint propagate-feature --feature runtime-benchmarks --left-side-feature-missing=ignore --workspace --fix --feature-enables-dep="runtime-benchmarks:frame-benchmarking" zepter lint propagate-feature --feature std --left-side-feature-missing=ignore --workspace --fix Signed-off-by:
-
- Jul 18, 2023
-
-
Oliver Tale-Yazdi authored
* Run integrity_test in RO externalities Signed-off-by:
Muharem Ismailov <[email protected]> * Fixup merge Signed-off-by:
-
- Jul 14, 2023
-
-
juangirini authored
* replace Index by Nonce * replace Index by Nonce * replace Index by Nonce * replace Index by Nonce * replace Index by Nonce * wip * remove index in lieu of nonce * wip * remove accountnonce in lieu of nonce * add minor improvement * rebase and merge conflicts
-
- Jul 13, 2023
-
-
gupnik authored
Moves `Block` to `frame_system` instead of `construct_runtime` and removes `Header` and `BlockNumber` (#14437) * Initial setup * Adds node block * Uses UncheckedExtrinsic and removes Where section * Updates frame_system to use Block * Adds deprecation warning * Fixes pallet-timestamp * Removes Header and BlockNumber * Addresses review comments * Addresses review comments * Adds comment about compiler bug * Removes where clause * Refactors code * Fixes errors in cargo check * Fixes errors in cargo check * Fixes warnings in cargo check * Formatting * Fixes construct_runtime tests * Uses import instead of full path for BlockNumber * Uses import instead of full path for Header * Formatting * Fixes construct_runtime tests * Fixes imports in benchmarks * Formatting * Fixes construct_runtime tests * Formatting * Minor updates * Fixes construct_runtime ui tests * Fixes construct_runtime ui tests with 1.70 * Fixes docs * Fixes docs * Adds u128 mock block type * Fixes split example * fixes for cumulus * ".git/.scripts/commands/fmt/fmt.sh" * Updates new tests * Fixes fully-qualified path in few places * Formatting * Update frame/examples/default-config/src/lib.rs Co-authored-by:
-
Sam Johnson authored
-
- Jul 12, 2023
-
-
Michal Kucharczyk authored* frame::support: GenesisConfig types for Runtime enabled * frame::support: macro generating GenesisBuild::build for RuntimeGenesisConfig * frame: ambiguity BuildStorage vs GenesisBuild fixed * fix * RuntimeGenesisBuild added * Revert "frame: ambiguity BuildStorage vs GenesisBuild fixed" This reverts commit 950f3d019d0e21c55a739c44cc19cdabd3ff0293. * Revert "fix" This reverts commit a2f76dd24e9a16cf9230d45825ed28787211118b. * Revert "RuntimeGenesisBuild added" This reverts commit 3c131b618138ced29c01ab8d15d8c6410c9e128b. * Revert "Revert "frame: ambiguity BuildStorage vs GenesisBuild fixed"" This reverts commit 2b1ecd467231eddec69f8d328039ba48a380da3d. * Revert "Revert "fix"" This reverts commit fd7fa629adf579d83e30e6ae9fd162637fc45e30. * Code review suggestions * frame: BuildGenesisConfig added, BuildGenesis deprecated * frame: some pallets updated with BuildGenesisConfig * constuct_runtime: support for BuildGenesisConfig * frame::support: genesis_build macro supports BuildGenesisConfig * frame: BuildGenesisConfig added, BuildGenesis deprecated * Cargo.lock update * test-runtime: fixes * Revert "fix" This reverts commit a2f76dd24e9a16cf9230d45825ed28787211118b. * Revert "frame: ambiguity BuildStorage vs GenesisBuild fixed" This reverts commit 950f3d019d0e21c55a739c44cc19cdabd3ff0293. * self review * doc fixed * ui tests fixed * fmt * tests fixed * genesis_build macrto fixed for non-generic GenesisConfig * BuildGenesisConfig constraints added * warning fixed * some duplication removed * fmt * fix * doc tests fix * doc fix * cleanup: remove BuildModuleGenesisStorage * self review comments * fix * Update frame/treasury/src/tests.rs Co-authored-by:
-
- Jul 09, 2023
-
-
Kian Paimani authored
* remove 'OnStakerSlash', replace with 'OnStakingEvents' * fix other features in pallets * small fixes * fix docs * fix docs * fix docs * Update primitives/staking/src/lib.rs Co-authored-by:
-
- Jun 21, 2023
-
-
Koute authored
-
- Jun 19, 2023
-
-
Oleg Plakida authored
Co-authored-by: command-bot <>
-
- May 31, 2023
-
-
Alexandru Vasile authored
Signed-off-by:Alexandru Vasile <[email protected]>
-
- May 29, 2023
-
-
Kian Paimani authored
* improve documentation of fast-unstake pallet * using Sam's crate now * fix * remove stuff not needed * Some updates * use new prelude. * update * some other fancy docs * Update frame/fast-unstake/src/lib.rs Co-authored-by:
🎉 * update syn * upgrade to docify v0.1.10 for some fixes * Apply suggestions from code review Co-authored-by: -
Alexandru Vasile authored
Signed-off-by:
-
- May 24, 2023
-
-
Bastian Köcher authored
* HoldReason: Improve usage `HoldReason` was switched recently to use the `composite_enum` attribute that will merge the enums from all pallets in the runtime to `RuntimeHoldReason`. `pallet-nis` was still requiring that the variant was passed as constant to call `hold`. The proper implementation is to use the `HoldReason` from inside the pallet directly when calling `hold`. This is done by adding a `RuntimeHoldReason` as type to the `Config` trait and requiring that `Currency` is using the same reason. Besides that the pr changes the name `HoldIdentifier` in `pallet_balances::Config` to `RuntimeHoldReason`. * Update frame/nis/src/lib.rs Co-authored-by:
-
- May 23, 2023
-
-
Sergej Sakac authored
* Try-state: DispatchResult as return type * try_state for the rest of the pallets * pre_upgrade * post_upgrade * try_runtime_upgrade * fixes * bags-list fix * fix * update test * warning fix * ... * final fixes
🤞 * warning.. * frame-support * warnings * Update frame/staking/src/migrations.rs Co-authored-by:
-
![dependabot[bot]'s avatar](https://secure.gravatar.com/avatar/bd5a8d6c673b738d52b0ac42a110045f3f964b3ebfc1d60ea805af743b1dc0e6?s=80&d=identicon "dependabot[bot]")
