Commits · bb8ddc46c1e3dcc6f30340b39c1fdb2d07472041 · parity / Mirrored projects / polkadot-sdk

Jan 31, 2024

[frame] `#[pallet::composite_enum]` improved variant count handling + removed... · bb8ddc46

Branislav Kontur authored Jan 31, 2024

[frame] `#[pallet::composite_enum]` improved variant count handling + removed `pallet_balances`'s `MaxHolds` config (#2657)

I started this investigation/issue based on @liamaharon

 question
[here](https://github.com/paritytech/polkadot-sdk/pull/1801#discussion_r1410452499).

## Problem

The `pallet_balances` integrity test should correctly detect that the
runtime has correct distinct `HoldReasons` variant count. I assume the
same situation exists for RuntimeFreezeReason.

It is not a critical problem, if we set `MaxHolds` with a sufficiently
large value, everything should be ok. However, in this case, the
integrity_test check becomes less useful.

**Situation for "any" runtime:**
- `HoldReason` enums from different pallets:
```rust
        /// from pallet_nis
        #[pallet::composite_enum]
	pub enum HoldReason {
		NftReceipt,
	}

        /// from pallet_preimage
        #[pallet::composite_enum]
	pub enum HoldReason {
		Preimage,
	}

        // from pallet_state-trie-migration
        #[pallet::composite_enum]
	pub enum HoldReason {
		SlashForContinueMigrate,
		SlashForMigrateCustomTop,
		SlashForMigrateCustomChild,
	}
```

- generated `RuntimeHoldReason` enum looks like:
```rust
pub enum RuntimeHoldReason {

    #[codec(index = 32u8)]
    Preimage(pallet_preimage::HoldReason),

    #[codec(index = 38u8)]
    Nis(pallet_nis::HoldReason),

    #[codec(index = 42u8)]
    StateTrieMigration(pallet_state_trie_migration::HoldReason),
}
```

- composite enum `RuntimeHoldReason` variant count is detected as `3`
- we set `type MaxHolds = ConstU32<3>`
- `pallet_balances::integrity_test` is ok with `3`(at least 3)

However, the real problem can occur in a live runtime where some
functionality might stop working. This is due to a total of 5 distinct
hold reasons (for pallets with multi-instance support, it is even more),
and not all of them can be used because of an incorrect `MaxHolds`,
which is deemed acceptable according to the `integrity_test`:
  ```
  // pseudo-code - if we try to call all of these:

T::Currency::hold(&pallet_nis::HoldReason::NftReceipt.into(),
&nft_owner, deposit)?;
T::Currency::hold(&pallet_preimage::HoldReason::Preimage.into(),
&nft_owner, deposit)?;

T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForContinueMigrate.into(),
&nft_owner, deposit)?;

  // With `type MaxHolds = ConstU32<3>` these two will fail

T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomTop.into(),
&nft_owner, deposit)?;

T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomChild.into(),
&nft_owner, deposit)?;
  ```  


## Solutions

A macro `#[pallet::*]` expansion is extended of `VariantCount`
implementation for the `#[pallet::composite_enum]` enum type. This
expansion generates the `VariantCount` implementation for pallets'
`HoldReason`, `FreezeReason`, `LockId`, and `SlashReason`. Enum variants
must be plain enum values without fields to ensure a deterministic
count.

The composite runtime enum, `RuntimeHoldReason` and
`RuntimeFreezeReason`, now sets `VariantCount::VARIANT_COUNT` as the sum
of pallets' enum `VariantCount::VARIANT_COUNT`:
```rust
#[frame_support::pallet(dev_mode)]
mod module_single_instance {

	#[pallet::composite_enum]
	pub enum HoldReason {
		ModuleSingleInstanceReason1,
		ModuleSingleInstanceReason2,
	}
...
}

#[frame_support::pallet(dev_mode)]
mod module_multi_instance {

	#[pallet::composite_enum]
	pub enum HoldReason<I: 'static = ()> {
		ModuleMultiInstanceReason1,
		ModuleMultiInstanceReason2,
		ModuleMultiInstanceReason3,
	}
...
}


impl self::sp_api_hidden_includes_construct_runtime::hidden_include::traits::VariantCount
    for RuntimeHoldReason
{
    const VARIANT_COUNT: u32 = 0
        + module_single_instance::HoldReason::VARIANT_COUNT
        + module_multi_instance::HoldReason::<module_multi_instance::Instance1>::VARIANT_COUNT
        + module_multi_instance::HoldReason::<module_multi_instance::Instance2>::VARIANT_COUNT
        + module_multi_instance::HoldReason::<module_multi_instance::Instance3>::VARIANT_COUNT;
}
```

In addition, `MaxHolds` is removed (as suggested
[here](https://github.com/paritytech/polkadot-sdk/pull/2657#discussion_r1443324573))
from `pallet_balances`, and its `Holds` are now bounded to
`RuntimeHoldReason::VARIANT_COUNT`. Therefore, there is no need to let
the runtime specify `MaxHolds`.


## For reviewers

Relevant changes can be found here:
- `substrate/frame/support/procedural/src/lib.rs` 
-  `substrate/frame/support/procedural/src/pallet/parse/composite.rs`
-  `substrate/frame/support/procedural/src/pallet/expand/composite.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/composite_helper.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/hold_reason.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/freeze_reason.rs`
- `substrate/frame/support/src/traits/misc.rs`

And the rest of the files is just about removed `MaxHolds` from
`pallet_balances`

## Next steps

Do the same for `MaxFreezes`
https://github.com/paritytech/polkadot-sdk/issues/2997.

---------

Co-authored-by: command-bot <>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Dónal Murray <[email protected]>
Co-authored-by: gupnik <[email protected]>

bb8ddc46

Jan 26, 2024

Sync Cargo.toml and crates.io versions (#3034) · 3717ec38

Liam Aharon authored Jan 27, 2024



Related https://github.com/paritytech/polkadot-sdk/issues/3032

---

Using https://github.com/liamaharon/cargo-workspace-version-tools/ 

`cargo run -- sync --path ../polkadot-sdk`

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

3717ec38

Jan 07, 2024

Bump the known_good_semver group with 4 updates (#2865) · 204fe7ff

dependabot[bot] authored Jan 07, 2024



Bumps the known_good_semver group with 4 updates:
[serde](https://github.com/serde-rs/serde),
[serde_json](https://github.com/serde-rs/json),
[clap](https://github.com/clap-rs/clap) and
[syn](https://github.com/dtolnay/syn).

Updates `serde` from 1.0.194 to 1.0.195
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/serde/releases">serde's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.195</h2>
<ul>
<li>Prevent remote definitions of tuple struct or tuple variant from
triggering dead_code warning (<a
href="https://redirect.github.com/serde-rs/serde/issues/2671">#2671</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/serde/commit/03eec42c3313b36da416be1486e9ecac345784d5"><code>03eec42</code></a>
Release 1.0.195</li>
<li><a
href="https://github.com/serde-rs/serde/commit/196f311ae2fd8ad94fe38a57830419859a4d3dbb"><code>196f311</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2671">#2671</a>
from dtolnay/deadremote</li>
<li><a
href="https://github.com/serde-rs/serde/commit/38d9e0b2091e9b6150486c2c37367819b86bcc39"><code>38d9e0b</code></a>
Revert &quot;Add FIXME to fix dead_code warning when using
serde(remote)&quot;</li>
<li><a
href="https://github.com/serde-rs/serde/commit/6502b3131697eff6420786ad71f87f29cfff3a13"><code>6502b31</code></a>
Fix new dead_code warning in tuple struct and tuple variant remote
defs</li>
<li><a
href="https://github.com/serde-rs/serde/commit/6f1a8c3115c8d2502178c25d610fbaee2e82c46b"><code>6f1a8c3</code></a>
Add FIXME to fix dead_code warning when using serde(remote)</li>
<li><a
href="https://github.com/serde-rs/serde/commit/d883c94cc9fe72d0512dc7f4def7191a401595c9"><code>d883c94</code></a>
Work around dead_code warning in tests</li>
<li><a
href="https://github.com/serde-rs/serde/commit/961fa59a7469c5b5e323b9723323df412048d60d"><code>961fa59</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2670">#2670</a>
from serde-rs/exhaustive</li>
<li><a
href="https://github.com/serde-rs/serde/commit/8bc71def551df190e6817d3311e5c76f751f53e6"><code>8bc71de</code></a>
Fill in omitted patterns for GenericArguments match</li>
<li><a
href="https://github.com/serde-rs/serde/commit/7c65a9dc0eab2d4d829b258a7b3549351bbe8dcd"><code>7c65a9d</code></a>
Pick up changes to non_exhaustive_omitted_patterns lint</li>
<li>See full diff in <a
href="https://github.com/serde-rs/serde/compare/v1.0.194...v1.0.195">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_json` from 1.0.110 to 1.0.111
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/json/releases">serde_json's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.111</h2>
<ul>
<li>Improve floating point parsing performance on loongarch64 (<a
href="https://redirect.github.com/serde-rs/json/issues/1100">#1100</a>,
thanks <a
href="https://github.com/heiher"><code>@heiher</code></a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/json/commit/0131ac68212e8094bd14ee618587d731b4f9a68b"><code>0131ac6</code></a>
Release 1.0.111</li>
<li><a
href="https://github.com/serde-rs/json/commit/96ecfadd3f7dd6366a2d07a098e228d15df93cb4"><code>96ecfad</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1100">#1100</a>
from heiher/limb-64-la64</li>
<li><a
href="https://github.com/serde-rs/json/commit/c80dbaf8ff5902ca670e0a48bbe495065b9314f5"><code>c80dbaf</code></a>
Set limb width to 64 for loongarch64</li>
<li>See full diff in <a
href="https://github.com/serde-rs/json/compare/v1.0.110...v1.0.111">compare
view</a></li>
</ul>
</details>
<br />

Updates `clap` from 4.4.12 to 4.4.13
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/releases">clap's
releases</a>.</em></p>
<blockquote>
<h2>v4.4.13</h2>
<h2>[4.4.13] - 2024-01-04</h2>
<h3>Documentation</h3>
<ul>
<li>Fix link to structopt migration guide</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.4.13] - 2024-01-04</h2>
<h3>Documentation</h3>
<ul>
<li>Fix link to structopt migration guide</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/2ab48b295c2463ce8c141a9868095b811ccf3b99"><code>2ab48b2</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/7a06a8cd619db704c6d826bf752eae3b86ce23a8"><code>7a06a8c</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/cca190efedf40f48147a3a4a777a9cc17728abdf"><code>cca190e</code></a>
docs: Correct link to StructOpt migration guide</li>
<li><a
href="https://github.com/clap-rs/clap/commit/5c31f453c1a9f46109db8e0a47ed212748c0556c"><code>5c31f45</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5281">#5281</a>
from Manishearth/safety-docs</li>
<li><a
href="https://github.com/clap-rs/clap/commit/ddae7e6f411c4c87294212152b8d9beea16637e7"><code>ddae7e6</code></a>
Correct safety docs</li>
<li><a
href="https://github.com/clap-rs/clap/commit/48d28aa689bfd0fb44ec025244b30ba261e2515a"><code>48d28aa</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/748ce18cc2ccc3f7c07fa8b7c5b6f90ed9242b72"><code>748ce18</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/adbe6ec4cb6a617070c41927a389d0bea7b30936"><code>adbe6ec</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5278">#5278</a>
from henry-hsieh/fix-nosort</li>
<li><a
href="https://github.com/clap-rs/clap/commit/2b48858ba84c62e9af97bee4734d70530254cd8a"><code>2b48858</code></a>
fix: Skip nosort option below bash 4.4</li>
<li><a
href="https://github.com/clap-rs/clap/commit/777b744102cde324dc75534ef043efc15a9f40be"><code>777b744</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5277">#5277</a>
from clap-rs/renovate/actions-setup-python-5.x</li>
<li>Additional commits viewable in <a
href="https://github.com/clap-rs/clap/compare/v4.4.12...v4.4.13">compare
view</a></li>
</ul>
</details>
<br />

Updates `syn` from 2.0.47 to 2.0.48
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/syn/releases">syn's
releases</a>.</em></p>
<blockquote>
<h2>2.0.48</h2>
<ul>
<li>Improve error message on unexpected token after <code>else</code>
(<a
href="https://redirect.github.com/dtolnay/syn/issues/1578">#1578</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/syn/commit/5e16fc24e68b16a381cb7ef22455dba9db143083"><code>5e16fc2</code></a>
Release 2.0.48</li>
<li><a
href="https://github.com/dtolnay/syn/commit/dc40084b15ab4a443179fc39cbadac6452408838"><code>dc40084</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1578">#1578</a>
from dtolnay/elseblock</li>
<li><a
href="https://github.com/dtolnay/syn/commit/82fcefce69d36e78301936c5af91f005d6a24357"><code>82fcefc</code></a>
Fix error message on unexpected token after 'else'</li>
<li><a
href="https://github.com/dtolnay/syn/commit/e8a5c68ad45194e575a923f6b1e08f1817196331"><code>e8a5c68</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1576">#1576</a>
from dtolnay/exhaustive</li>
<li><a
href="https://github.com/dtolnay/syn/commit/97b1df6d935cb4801f4090782304577c8574d024"><code>97b1df6</code></a>
Pick up changes to non_exhaustive_omitted_patterns lint</li>
<li>See full diff in <a
href="https://github.com/dtolnay/syn/compare/2.0.47...2.0.48">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

204fe7ff

Jan 04, 2024

Bump the known_good_semver group with 4 updates (#2845) · 88e7b49c

dependabot[bot] authored Jan 04, 2024



Bumps the known_good_semver group with 4 updates:
[serde](https://github.com/serde-rs/serde),
[serde_json](https://github.com/serde-rs/json),
[clap](https://github.com/clap-rs/clap) and
[serde_yaml](https://github.com/dtolnay/serde-yaml).

Updates `serde` from 1.0.193 to 1.0.194
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/serde/releases">serde's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.194</h2>
<ul>
<li>Update proc-macro2 to fix caching issue when using a rustc-wrapper
such as sccache</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/serde/commit/d2d977a6c6dcff237ae956336d18b0c900c61aad"><code>d2d977a</code></a>
Release 1.0.194</li>
<li><a
href="https://github.com/serde-rs/serde/commit/a9a6ee9d7f2e3a3306ad7c7a8f21dcf369c6acb7"><code>a9a6ee9</code></a>
Pull in proc-macro2 sccache fix</li>
<li><a
href="https://github.com/serde-rs/serde/commit/28c5d215c11b66368b725f04cb92e49e4350bcdc"><code>28c5d21</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2669">#2669</a>
from dtolnay/optionifletelse</li>
<li><a
href="https://github.com/serde-rs/serde/commit/3d6a789562579fb7ea783e0d7f35530914d8baca"><code>3d6a789</code></a>
Remove option_if_let_else clippy suppression</li>
<li><a
href="https://github.com/serde-rs/serde/commit/a0e68698e33fa928f1d9f208d68b17df9f8bb568"><code>a0e6869</code></a>
Work around doc_link_with_quotes pedantic clippy lint</li>
<li>See full diff in <a
href="https://github.com/serde-rs/serde/compare/v1.0.193...v1.0.194">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_json` from 1.0.108 to 1.0.110
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/json/releases">serde_json's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.109</h2>
<ul>
<li>Documentation improvements</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/json/commit/df5cf215b70fb6341b255e7c0a210c06f64c0669"><code>df5cf21</code></a>
Release 1.0.110</li>
<li><a
href="https://github.com/serde-rs/json/commit/c35856a93c37b48b3d6efc4fec8e05554dd3f9d5"><code>c35856a</code></a>
Pull in proc-macro2 sccache fix</li>
<li><a
href="https://github.com/serde-rs/json/commit/f88bf1fccb05aa4de129675de44eb6aaf3fec0a0"><code>f88bf1f</code></a>
Release 1.0.109</li>
<li><a
href="https://github.com/serde-rs/json/commit/bb62c73ecef901e689b0a7a67ed613a32975520c"><code>bb62c73</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1097">#1097</a>
from serde-rs/doccfg</li>
<li><a
href="https://github.com/serde-rs/json/commit/df36d109fd9f9cdd22a874c0177cafec12237f95"><code>df36d10</code></a>
Restore doc cfg on re-exports</li>
<li><a
href="https://github.com/serde-rs/json/commit/c3670913423329c166add9d85ecdfc3e3da21e7a"><code>c367091</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1095">#1095</a>
from dtolnay/hashtest</li>
<li><a
href="https://github.com/serde-rs/json/commit/b328ee7df4dd772922f084600aa7cea39218b694"><code>b328ee7</code></a>
Eliminate hash closure in favor of calling hash_one directly</li>
<li><a
href="https://github.com/serde-rs/json/commit/b9bcbad3c094042f79f1a45189ec0edbb8f9f322"><code>b9bcbad</code></a>
Use BuildHasher::hash_one</li>
<li><a
href="https://github.com/serde-rs/json/commit/7ff6c9e30c2ecc2cdcf089ed86c7ccfe7a41721c"><code>7ff6c9e</code></a>
Use random hasher state for number hashing test</li>
<li><a
href="https://github.com/serde-rs/json/commit/fe031cd1de4dde5b47e0f18934632b41bd18b48d"><code>fe031cd</code></a>
Delete trace_macros! functionality from test</li>
<li>Additional commits viewable in <a
href="https://github.com/serde-rs/json/compare/v1.0.108...v1.0.110">compare
view</a></li>
</ul>
</details>
<br />

Updates `clap` from 4.4.11 to 4.4.12
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/releases">clap's
releases</a>.</em></p>
<blockquote>
<h2>v4.4.12</h2>
<h2>[4.4.12] - 2023-12-28</h2>
<h3>Performance</h3>
<ul>
<li>Only ask <code>TypedValueParser</code> for possible values if
needed</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.4.12] - 2023-12-28</h2>
<h3>Performance</h3>
<ul>
<li>Only ask <code>TypedValueParser</code> for possible values if
needed</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/6d601e6f312857d78f47741268f1748840484d4a"><code>6d601e6</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/048e7f0fbc4f8108894e4307af768c8d332a0576"><code>048e7f0</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/53f5b820988c1c03f0d2696fc144857ad461edc1"><code>53f5b82</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5267">#5267</a>
from vermiculus/sa/avoid-pv-expansion-in-help</li>
<li><a
href="https://github.com/clap-rs/clap/commit/05cd057978db743a65fb5fde33213af752d064e7"><code>05cd057</code></a>
perf: Avoid retrieving possible_values unless used</li>
<li><a
href="https://github.com/clap-rs/clap/commit/29208083b0598ba7d1b80e79821c0ba3eb2342ce"><code>2920808</code></a>
test: Update snapshots</li>
<li><a
href="https://github.com/clap-rs/clap/commit/28763ebb6d8714f6ca588bf477729040e0e760b0"><code>28763eb</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/ace7bb5b4570b030f7c2d0fa91e0afaaac1b0030"><code>ace7bb5</code></a>
docs(complete): Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/76beca4d4d42a817bbb578f23553c64ded2aea97"><code>76beca4</code></a>
docs(complete): Polish API reference for dynamic</li>
<li><a
href="https://github.com/clap-rs/clap/commit/3630e582d3ec59912b8e9369c38687695ddb1f43"><code>3630e58</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5273">#5273</a>
from epage/docsrs</li>
<li><a
href="https://github.com/clap-rs/clap/commit/3724b9e2e4c2a2e69337b6d809949b246d3fef39"><code>3724b9e</code></a>
docs: Include more content on docs.rs</li>
<li>See full diff in <a
href="https://github.com/clap-rs/clap/compare/v4.4.11...v4.4.12">compare
view</a></li>
</ul>
</details>
<br />

Updates `serde_yaml` from 0.9.29 to 0.9.30
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/serde-yaml/releases">serde_yaml's
releases</a>.</em></p>
<blockquote>
<h2>0.9.30</h2>
<ul>
<li>Update proc-macro2 to fix caching issue when using a rustc-wrapper
such as sccache</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/09ee25156f608f95150b27edd120bd5471db3c64"><code>09ee251</code></a>
Release 0.9.30</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/caea939ece85ab54ac41de0672d683905f1e406a"><code>caea939</code></a>
Pull in proc-macro2 sccache fix</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/d255918c141fd72d01f169bb5aa0152234981699"><code>d255918</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/serde-yaml/issues/403">#403</a>
from dtolnay/optionifletelse</li>
<li><a
href="https://github.com/dtolnay/serde-yaml/commit/8cfeedd766f83dab24d03b9fb11b72886a247425"><code>8cfeedd</code></a>
Remove option_if_let_else clippy suppression</li>
<li>See full diff in <a
href="https://github.com/dtolnay/serde-yaml/compare/0.9.29...0.9.30">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

88e7b49c

Dec 18, 2023

Relaxed clippy fixes/nits (#2661) · d941784b

Branislav Kontur authored Dec 18, 2023



This PR contains just a few clippy fixes and nits, which are, however,
relaxed by workspace clippy settings here:
https://github.com/paritytech/polkadot-sdk/blob/master/Cargo.toml#L483-L506

---------

Co-authored-by: Dmitry Sinyavin <[email protected]>
Co-authored-by: ordian <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Bastian Köcher <[email protected]>

d941784b

Dec 13, 2023

Set clippy lints in workspace (requires rust 1.74) (#2390) · be8e6268

Squirrel authored Dec 13, 2023



We currently use a bit of a hack in `.cargo/config` to make sure that
clippy isn't too annoying by specifying the list of lints.

There is now a stable way to define lints for a workspace. The only down
side is that every crate seems to have to opt into this so there's a
*few* files modified in this PR.

Dependencies:

- [x] PR that upgrades CI to use rust 1.74 is merged.

---------

Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>

be8e6268

Dec 12, 2023

Staking: Add `deprecate_controller_batch` AdminOrigin call (#2589) · 048a9c27

Ross Bulat authored Dec 12, 2023



Partially Addresses #2500

Adds a `deprecate_controller_batch` call to the staking pallet that is
callable by `Root` and `StakingAdmin`. To be used for controller account
deprecation and removed thereafter. Adds
`MaxControllersDeprecationBatch` pallet constant that defines max
possible deprecations per call.

- [x] Add `deprecate_controller_batch` call, and
`MaxControllersInDeprecationBatch` constant.
- [x] Add tests, benchmark, weights. Tests that weight is only consumed
if unique pair.
- [x] Adds `StakingAdmin` origin to staking's `AdminOrigin` type in
westend runtime.
- [x] Determined that worst case 5,900 deprecations does fit into
`maxBlock` `proofSize` and `refTime` in both normal and operational
thresholds, meaning we can deprecate all controllers for each network in
one call.

## Block Weights

By querying `consts.system.blockWeights` we can see that the
`deprecate_controller_batch` weights fit within the `normal` threshold
on Polkadot.

#### `controller_deprecation_batch` where i = 5900:
#### Ref time: 69,933,325,300
#### Proof size: 21,040,390

### Polkadot 

```
// consts.query.blockWeights

maxBlock: {
        refTime: 2,000,000,000,000
        proofSize: 18,446,744,073,709,551,615
}
normal: {
 maxExtrinsic: {
	refTime: 1,479,873,955,000
	proofSize: 13,650,590,614,545,068,195
 }
 maxTotal: {
	refTime: 1,500,000,000,000
	proofSize: 13,835,058,055,282,163,711
 }
}
```

### Kusama

```
// consts.query.blockWeights

  maxBlock: {
    refTime: 2,000,000,000,000
    proofSize: 18,446,744,073,709,551,615
  }
    normal: {
      maxExtrinsic: {
        refTime: 1,479,875,294,000
        proofSize: 13,650,590,614,545,068,195
      }
      maxTotal: {
        refTime: 1,500,000,000,000
        proofSize: 13,835,058,055,282,163,711
      }
}
```

---------

Co-authored-by: command-bot <>
Co-authored-by: Gonçalo Pestana <[email protected]>

048a9c27

Dec 01, 2023

Enforce consistent and correct toml formatting (#2518) · 4a293bc5

Liam Aharon authored Dec 01, 2023

Using taplo, fixes all our broken and inconsistent toml formatting and
adds CI to keep them tidy.

If people want we can customise the format rules as described here
https://taplo.tamasfe.dev/configuration/formatter-options.html

@ggwpez

, I suggest zepter is used only for checking features are
propagated, and leave formatting for taplo to avoid duplicate work and
conflicts.

TODO
- [x] Use `exclude = [...]` syntax in taplo file to ignore zombienet
tests instead of deleting the dir

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

4a293bc5

Nov 30, 2023

Bump the known_good_semver group with 2 updates (#2570) · 6742aba0

dependabot[bot] authored Nov 30, 2023



Bumps the known_good_semver group with 2 updates:
[serde](https://github.com/serde-rs/serde) and
[clap](https://github.com/clap-rs/clap).

Updates `serde` from 1.0.188 to 1.0.193
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/serde/releases">serde's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.193</h2>
<ul>
<li>Fix field names used for the deserialization of
<code>RangeFrom</code> and <code>RangeTo</code> (<a
href="https://redirect.github.com/serde-rs/serde/issues/2653">#2653</a>,
<a
href="https://redirect.github.com/serde-rs/serde/issues/2654">#2654</a>,
<a
href="https://redirect.github.com/serde-rs/serde/issues/2655">#2655</a>,
thanks <a
href="https://github.com/emilbonnek"><code>@emilbonnek</code></a>)</li>
</ul>
<h2>v1.0.192</h2>
<ul>
<li>Allow internal tag field in untagged variant (<a
href="https://redirect.github.com/serde-rs/serde/issues/2646">#2646</a>,
thanks <a
href="https://github.com/robsdedude"><code>@robsdedude</code></a>)</li>
</ul>
<h2>v1.0.191</h2>
<ul>
<li>Documentation improvements</li>
</ul>
<h2>v1.0.190</h2>
<ul>
<li>Preserve NaN sign when deserializing f32 from f64 or vice versa (<a
href="https://redirect.github.com/serde-rs/serde/issues/2637">#2637</a>)</li>
</ul>
<h2>v1.0.189</h2>
<ul>
<li>Fix &quot;cannot infer type&quot; error when internally tagged enum
contains untagged variant (<a
href="https://redirect.github.com/serde-rs/serde/issues/2613">#2613</a>,
thanks <a href="https://github.com/ahl"><code>@ahl</code></a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/serde/commit/44613c7d0190dbb5ecd2d5ec19c636f45b7488cc"><code>44613c7</code></a>
Release 1.0.193</li>
<li><a
href="https://github.com/serde-rs/serde/commit/c706281df3c8d50dba1763f19c856df2746eba6c"><code>c706281</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2655">#2655</a>
from dtolnay/rangestartend</li>
<li><a
href="https://github.com/serde-rs/serde/commit/65d75b8fe3105f00ab2e01537d568d4587167582"><code>65d75b8</code></a>
Add RangeFrom and RangeTo tests</li>
<li><a
href="https://github.com/serde-rs/serde/commit/332b0cba40bcbcc7a6b23a9706277c54791a9856"><code>332b0cb</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2654">#2654</a>
from dtolnay/rangestartend</li>
<li><a
href="https://github.com/serde-rs/serde/commit/8c4af412969086bc8f54fdc2a079d373632e0a03"><code>8c4af41</code></a>
Fix more RangeFrom / RangeEnd mixups</li>
<li><a
href="https://github.com/serde-rs/serde/commit/24a78f071b22ae491eec4127be696ac255b9b5d3"><code>24a78f0</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2653">#2653</a>
from emilbonnek/fix/range-to-from-de-mixup</li>
<li><a
href="https://github.com/serde-rs/serde/commit/c91c33436d7aaef7472ebc18b734ddc9b5bd11fa"><code>c91c334</code></a>
Fix Range{From,To} deserialize mixup</li>
<li><a
href="https://github.com/serde-rs/serde/commit/2083f43a287cac8302009fda5bbe41518dd83209"><code>2083f43</code></a>
Update ui test suite to nightly-2023-11-19</li>
<li><a
href="https://github.com/serde-rs/serde/commit/4676abdc9e6bbbddfb33a00ce8d7e81e92f01120"><code>4676abd</code></a>
Release 1.0.192</li>
<li><a
href="https://github.com/serde-rs/serde/commit/35700eb23e21d8cb198ef4a422ddad13b855ce3b"><code>35700eb</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2646">#2646</a>
from robsdedude/fix/2643/allow-tag-field-in-untagged</li>
<li>Additional commits viewable in <a
href="https://github.com/serde-rs/serde/compare/v1.0.188...v1.0.193">compare
view</a></li>
</ul>
</details>
<br />

Updates `clap` from 4.4.6 to 4.4.10
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/releases">clap's
releases</a>.</em></p>
<blockquote>
<h2>v4.4.10</h2>
<h2>[4.4.10] - 2023-11-28</h2>
<h3>Documentation</h3>
<ul>
<li>Link out to changelog</li>
<li>Cross link derive's attribute reference to derive tutorial</li>
</ul>
<h2>v4.4.9</h2>
<h2>[4.4.9] - 2023-11-27</h2>
<h3>Fixes</h3>
<ul>
<li><em>(help)</em> Show correct <code>Command::about</code> under
flattened headings</li>
<li><em>(help)</em> Respect <code>hide</code> when flattening
subcommands</li>
</ul>
<h2>v4.4.8</h2>
<h2>[4.4.8] - 2023-11-10</h2>
<h3>Features</h3>
<ul>
<li>Add <code>Command::flatten_help</code> to allow <code>git stash
-h</code> like help for subcommands</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.4.10] - 2023-11-28</h2>
<h3>Documentation</h3>
<ul>
<li>Link out to changelog</li>
<li>Cross link derive's attribute reference to derive tutorial</li>
</ul>
<h2>[4.4.9] - 2023-11-27</h2>
<h3>Fixes</h3>
<ul>
<li><em>(help)</em> Show correct <code>Command::about</code> under
flattened headings</li>
<li><em>(help)</em> Respect <code>hide</code> when flattening
subcommands</li>
</ul>
<h2>[4.4.8] - 2023-11-10</h2>
<h3>Features</h3>
<ul>
<li>Add <code>Command::flatten_help</code> to allow <code>git stash
-h</code> like help for subcommands</li>
</ul>
<h2>[4.4.7] - 2023-10-24</h2>
<h3>Performance</h3>
<ul>
<li>Reduced code size</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/c0a1814d3c1d93c18faaedc95fd251846e47f4fe"><code>c0a1814</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/c83e681e20b05f7e128088f47f8fcfc44e8ea166"><code>c83e681</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/91bcac4ca9d442786f554abeb7b1ed6d7a464a42"><code>91bcac4</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5230">#5230</a>
from epage/migrate</li>
<li><a
href="https://github.com/clap-rs/clap/commit/030d87505d150345ddd425c1df21c034d2ae7748"><code>030d875</code></a>
docs: Link out to the changelog at the relevant tag</li>
<li><a
href="https://github.com/clap-rs/clap/commit/b661a9de04aebd1adaaafdbf7e470f07a8d8a36d"><code>b661a9d</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5229">#5229</a>
from epage/derive</li>
<li><a
href="https://github.com/clap-rs/clap/commit/a08587b00e347492165ded1415bad6ab339e9f0b"><code>a08587b</code></a>
docs(derive): Link to tutorial sections for attributes</li>
<li><a
href="https://github.com/clap-rs/clap/commit/21b671f689bc0b8d790dc8c42902c22822bf6f82"><code>21b671f</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/93ba76dbaaf9136313a4fe2978693cc39fa467dd"><code>93ba76d</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/c1c55b30d853446e2cab78664c0d22c1b77d4dfd"><code>c1c55b3</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5228">#5228</a>
from epage/flat</li>
<li><a
href="https://github.com/clap-rs/clap/commit/b13f6d98622b80ba30e63c2c6e65d218cc8a4de3"><code>b13f6d9</code></a>
fix(help): Hide 'help' if only flattened subcommand</li>
<li>Additional commits viewable in <a
href="https://github.com/clap-rs/clap/compare/v4.4.6...v4.4.10">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

6742aba0

Nov 01, 2023

[NPoS] Paging reward payouts in order to scale rewardable nominators (#1189) · 00b85c51

Ankan authored Nov 01, 2023



helps https://github.com/paritytech/polkadot-sdk/issues/439.
closes https://github.com/paritytech/polkadot-sdk/issues/473.

PR link in the older substrate repository:
https://github.com/paritytech/substrate/pull/13498.

# Context
Rewards payout is processed today in a single block and limited to
`MaxNominatorRewardedPerValidator`. This number is currently 512 on both
Kusama and Polkadot.

This PR tries to scale the nominators payout to an unlimited count in a
multi-block fashion. Exposures are stored in pages, with each page
capped to a certain number (`MaxExposurePageSize`). Starting out, this
number would be the same as `MaxNominatorRewardedPerValidator`, but
eventually, this number can be lowered through new runtime upgrades to
limit the rewardeable nominators per dispatched call instruction.

The changes in the PR are backward compatible.

## How payouts would work like after this change
Staking exposes two calls, 1) the existing `payout_stakers` and 2)
`payout_stakers_by_page`.

### payout_stakers
This remains backward compatible with no signature change. If for a
given era a validator has multiple pages, they can call `payout_stakers`
multiple times. The pages are executed in an ascending sequence and the
runtime takes care of preventing double claims.

### payout_stakers_by_page
Very similar to `payout_stakers` but also accepts an extra param
`page_index`. An account can choose to payout rewards only for an
explicitly passed `page_index`.

**Lets look at an example scenario**
Given an active validator on Kusama had 1100 nominators,
`MaxExposurePageSize` set to 512 for Era e. In order to pay out rewards
to all nominators, the caller would need to call `payout_stakers` 3
times.

- `payout_stakers(origin, stash, e)` => will pay the first 512
nominators.
- `payout_stakers(origin, stash, e)` => will pay the second set of 512
nominators.
- `payout_stakers(origin, stash, e)` => will pay the last set of 76
nominators.
...
- `payout_stakers(origin, stash, e)` => calling it the 4th time would
return an error `InvalidPage`.

The above calls can also be replaced by `payout_stakers_by_page` and
passing a `page_index` explicitly.

## Commission note
Validator commission is paid out in chunks across all the pages where
each commission chunk is proportional to the total stake of the current
page. This implies higher the total stake of a page, higher will be the
commission. If all the pages of a validator's single era are paid out,
the sum of commission paid to the validator across all pages should be
equal to what the commission would have been if we had a non-paged
exposure.

### Migration Note
Strictly speaking, we did not need to bump our storage version since
there is no migration of storage in this PR. But it is still useful to
mark a storage upgrade for the following reasons:

- New storage items are introduced in this PR while some older storage
items are deprecated.
- For the next `HistoryDepth` eras, the exposure would be incrementally
migrated to its corresponding paged storage item.
- Runtimes using staking pallet would strictly need to wait at least
`HistoryDepth` eras with current upgraded version (14) for the migration
to complete. At some era `E` such that `E >
era_at_which_V14_gets_into_effect + HistoryDepth`, we will upgrade to
version X which will remove the deprecated storage items.
In other words, it is a strict requirement that E<sub>x</sub> -
E<sub>14</sub> > `HistoryDepth`, where
E<sub>x</sub> = Era at which deprecated storages are removed from
runtime,
E<sub>14</sub> = Era at which runtime is upgraded to version 14.
- For Polkadot and Kusama, there is a [tracker
ticket](https://github.com/paritytech/polkadot-sdk/issues/433) to clean
up the deprecated storage items.

### Storage Changes

#### Added
- ErasStakersOverview
- ClaimedRewards
- ErasStakersPaged

#### Deprecated
The following can be cleaned up after 84 eras which is tracked
[here](https://github.com/paritytech/polkadot-sdk/issues/433).

- ErasStakers.
- ErasStakersClipped.
- StakingLedger.claimed_rewards, renamed to
StakingLedger.legacy_claimed_rewards.

### Config Changes
- Renamed MaxNominatorRewardedPerValidator to MaxExposurePageSize.

### TODO
- [x] Tracker ticket for cleaning up the old code after 84 eras.
- [x] Add companion.
- [x] Redo benchmarks before merge.
- [x] Add Changelog for pallet_staking.
- [x] Pallet should be configurable to enable/disable paged rewards.
- [x] Commission payouts are distributed across pages.
- [x] Review documentation thoroughly.
- [x] Rename `MaxNominatorRewardedPerValidator` ->
`MaxExposurePageSize`.
- [x] NMap for `ErasStakersPaged`.
- [x] Deprecate ErasStakers.
- [x] Integrity tests.

### Followup issues
[Runtime api for deprecated ErasStakers storage
item](https://github.com/paritytech/polkadot-sdk/issues/426)

---------

Co-authored-by: Javier Viola <[email protected]>
Co-authored-by: Ross Bulat <[email protected]>
Co-authored-by: command-bot <>

00b85c51

Oct 24, 2023

Ensure correct variant count in `Runtime[Hold/Freeze]Reason` (#1900) · 35eb133b

Kian Paimani authored Oct 24, 2023



closes https://github.com/paritytech/polkadot-sdk/issues/1882

## Breaking Changes

This PR introduces a new item to `pallet_balances::Config`:

```diff
trait Config {
++    type RuntimeFreezeReasons;
}
```

This value is only used to check it against `type MaxFreeze`. A similar
check has been added for `MaxHolds` against `RuntimeHoldReasons`, which
is already given to `pallet_balances`.

In all contexts, you should pass the real `RuntimeFreezeReasons`
generated by `construct_runtime` to `type RuntimeFreezeReasons`. Passing
`()` would also work, but it would imply that the runtime uses no
freezes at all.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

35eb133b

Oct 20, 2023

`xcm`: Change `TypeInfo::path` to not include `staging` (#1948) · f3bf5c1a

Bastian Köcher authored Oct 20, 2023



The `xcm` crate was renamed to `staging-xcm` to be able to publish it to
crates.io as someone as squatted `xcm`. The problem with this rename is
that the `TypeInfo` includes the crate name which ultimately lands in
the metadata. The metadata is consumed by downstream users like
`polkadot-js` or people building on top of `polkadot-js`. These people
are using the entire `path` to find the type in the type registry. Thus,
their code would break as the type path would now be [`staging_xcm`,
`VersionedXcm`] instead of [`xcm`, `VersionedXcm`]. This pull request
fixes this by renaming the path segment `staging_xcm` to `xcm`.

This requires: https://github.com/paritytech/scale-info/pull/197

---------

Co-authored-by: Francisco Aguirre <[email protected]>

f3bf5c1a

Oct 13, 2023
- frame: use derive-impl for beefy and mmr pallets (#1867) · 82bfe284
  Adrian Catangiu authored Oct 13, 2023
```
Part of #171
```
  82bfe284
Sep 14, 2023

frame/beefy: add privileged call to reset BEEFY consensus (#1534) · bdb3f98d

Adrian Catangiu authored Sep 14, 2023



We want to be able to (re)set BEEFY genesis in order to (re)start BEEFY
consensus on chains which didn't run it since genesis.

This commit adds privileged helper call to (re)set BEEFY genesis to some
block in the future.

Signed-off-by: Adrian Catangiu <[email protected]>

bdb3f98d

Aug 30, 2023

Bump the known_good_semver group with 2 updates (#1284) · c5060a5d

dependabot[bot] authored Aug 30, 2023



Bumps the known_good_semver group with 2 updates: [serde](https://github.com/serde-rs/serde) and [clap](https://github.com/clap-rs/clap).


Updates `serde` from 1.0.186 to 1.0.188
- [Release notes](https://github.com/serde-rs/serde/releases)
- [Commits](https://github.com/serde-rs/serde/compare/v1.0.186...v1.0.188)

Updates `clap` from 4.4.0 to 4.4.1
- [Release notes](https://github.com/clap-rs/clap/releases)
- [Changelog](https://github.com/clap-rs/clap/blob/master/CHANGELOG.md)
- [Commits](https://github.com/clap-rs/clap/compare/clap_complete-v4.4.0...v4.4.1)

---
updated-dependencies:
- dependency-name: serde
  dependency-type: direct:production
  update-type: version-update:semver-patch
  dependency-group: known_good_semver
- dependency-name: clap
  dependency-type: direct:production
  update-type: version-update:semver-patch
  dependency-group: known_good_semver
...

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

c5060a5d

Aug 29, 2023

Fix build profiles (#1229) · dcda0e50

Oliver Tale-Yazdi authored Aug 29, 2023



* Fix build profiles

Closes https://github.com/paritytech/polkadot-sdk/issues/1155

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Manually set version to 1.0.0

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Use workspace repo

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* 'Authors and Edition from workspace

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

dcda0e50

Aug 25, 2023
- Diener workspacify · f441a5fc
  Alexander authored Aug 25, 2023
```
Signed-off-by: alvicsam <[email protected]>
```
  f441a5fc
Aug 23, 2023

Format and Sort features in `Cargo.toml` files (#14803) · 8b945546

Oliver Tale-Yazdi authored Aug 23, 2023



* CI: Add feature sorting check

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Sort all features

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add some mistakes

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Revert "Add some mistakes"

This reverts commit b2b1099f979f6decb22d09b46689c1554bb72e81.

* CI job naming

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add oneliner formatting

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Explain tool

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Use latest version

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Better erorr message

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Format after master merge

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Use --check option

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Messed up the merge commit...

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

8b945546

Restructure `frame_support` macro related exports (#14745) · 878c562c

juangirini authored Aug 23, 2023



* make reexports private

* make reexports private 2

* make reexports private for runtime-benchmarking

* make reexports private for try-runtime

* fix for try-runtime

* make reexports private for tests

* fmt

* make reexports private for tests

* make reexports private for experimental

* fix beefy

* fix ui test

* fix ui test

* fix benches

* ".git/.scripts/commands/fmt/fmt.sh"

* fix contracts use

* wip

* wip

* do not reexport sp_api::metadata_ir

* fix CI checks

* fix support tests

* ".git/.scripts/commands/fmt/fmt.sh"

* Update frame/support/src/lib.rs

Co-authored-by: Bastian Köcher <[email protected]>

* import codec directly

* fmt

* fix node-cli tests

---------

Co-authored-by: command-bot <>
Co-authored-by: Bastian Köcher <[email protected]>

878c562c

Aug 10, 2023

[NPoS] Implements dynamic number of nominators (#12970) · 93754780

Gonçalo Pestana authored Aug 10, 2023



* Implements dynamic nominations per nominator

* Adds SnapshotBounds and ElectionSizeTracker

* Changes the ElectionDataProvider interface to receive ElectionBounds as input

* Implements get_npos_voters with ElectionBounds

* Implements get_npos_targets with ElectionBounds

* Adds comments

* tests

* Truncates nomninations that exceed nominations quota; Old tests passing

* Uses DataProviderBounds and ElectionBounds (to continue)

* Finishes conversions - tests passing

* Refactor staking in babe mocks

* Replaces MaxElectableTargets and MaxElectingVoters with ElectionBounds; Adds more tests

* Fixes nits; node compiling

* bechmarks

* removes nomination_quota extrinsic to request the nomination quota

* Lazy quota check, ie. at nominate time only

* remove non-working test (for now)

* tests lazy nominations quota when quota is lower than current number of nominated targets

* Adds runtime API and custom RPC call for clients to query the nominations quota for a given balance

* removes old rpc

* Cosmetic touches

* All mocks working

* Fixes benchmarking mocks

* nits

* more tests

* renames trait methods

* nit

* ".git/.scripts/commands/fmt/fmt.sh"

* Fix V2 PoV benchmarking (#13485)

* Bump default 'additional_trie_layers' to two

The default here only works for extremely small runtimes, which have
no more than 16 storage prefices. This is changed to a "sane" default
of 2, which is save for runtimes with up to 4096 storage prefices (eg StorageValue).

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Update tests and test weights

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Fix PoV weights

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* ".git/.scripts/commands/bench/bench.sh" pallet dev pallet_balances

* ".git/.scripts/commands/bench/bench.sh" pallet dev pallet_message_queue

* ".git/.scripts/commands/bench/bench.sh" pallet dev pallet_glutton

* ".git/.scripts/commands/bench/bench.sh" pallet dev pallet_glutton

* Fix sanity check

>0 would also do as a check, but let's try this.

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: command-bot <>

* Move BEEFY code to consensus (#13484)

* Move beefy primitives to consensus dir
* Move beefy gadget to client consensus folder
* Rename beefy crates

* chore: move genesis block builder to chain-spec crate. (#13427)

* chore: move genesis block builder to block builder crate.

* add missing file

* chore: move genesis block builder to sc-chain-spec

* Update client/chain-spec/src/genesis.rs

Co-authored-by: Bastian Köcher <[email protected]>

* Update test-utils/runtime/src/genesismap.rs

Co-authored-by: Bastian Köcher <[email protected]>

* Update test-utils/runtime/client/src/lib.rs

* fix warnings

* fix warnings

---------

Co-authored-by: Bastian Köcher <[email protected]>

* Speed up storage iteration from within the runtime (#13479)

* Speed up storage iteration from within the runtime

* Move the cached iterator into an `Option`

* Use `RefCell` in no_std

* Simplify the code slightly

* Use `Option::replace`

* Update doc comment for `next_storage_key_slow`

* Make unbounded channels size warning exact (part 1) (#13490)

* Replace `futures-channel` with `async-channel` in `out_events`

* Apply suggestions from code review

Co-authored-by: Koute <[email protected]>

* Also print the backtrace of `send()` call

* Switch from `backtrace` crate to `std::backtrace`

* Remove outdated `backtrace` dependency

* Remove `backtrace` from `Cargo.lock`

---------

Co-authored-by: Koute <[email protected]>

* Removal of Prometheus alerting rules deployment in cloud-infra (#13499)

* sp-consensus: remove unused error variants (#13495)

* Expose `ChargedAmount` (#13488)

* Expose `ChargedAmount`

* Fix imports

* sc-consensus-beefy: fix metrics: use correct names (#13494)


Signed-off-by: acatangiu <[email protected]>

* clippy fix

* removes NominationsQuotaExceeded event

* Update frame/staking/src/lib.rs

Co-authored-by: Ross Bulat <[email protected]>

* adds back the npos_max_iter

* remove duplicate imports added after merge

* fmt

* Adds comment in public struct; Refactors CountBound and SizeCount to struct

* addresses various pr comments

* PR comment reviews

* Fixes on-chain election bounds and related code

* EPM checks the size of the voter list returned by the data provider

* cosmetic changes

* updates e2e tests mock

* Adds more tests for size tracker and refactors code

* Adds back only_iterates_max_2_times_max_allowed_len test

* Refactor

* removes unecessary dependency

* empty commit -- restart all stuck CI jobs

* restarts ci jobs

* Renames ElectionBounds -> Bounds in benchmarking mocks et al

* updates mocks

* Update frame/election-provider-support/src/lib.rs

Co-authored-by: Kian Paimani <[email protected]>

* Update frame/staking/src/pallet/impls.rs

Co-authored-by: Kian Paimani <[email protected]>

* Update frame/election-provider-support/src/lib.rs

Co-authored-by: Kian Paimani <[email protected]>

* Update frame/staking/src/tests.rs

Co-authored-by: Kian Paimani <[email protected]>

* more checks in api_nominations_quota in tests

* Improves docs

* fixes e2e tests

* Uses size_hint rather than mem::size_of in size tracker; Refactor size tracker to own module

* nits from reviews

* Refactors bounds to own module; improves docs

* More tests and docs

* fixes docs

* Fixes benchmarks

* Fixes rust docs

* fixes bags-list remote-ext-tests

* Simplify bound checks in create_snapshot_external

* Adds target size check in get_npos_targets

* ".git/.scripts/commands/fmt/fmt.sh"

* restart ci

* rust doc fixes and cosmetic nits

* rollback upgrade on parity-scale-codec version (unecessary)

* reset cargo lock, no need to update it

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Signed-off-by: acatangiu <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Davide Galassi <[email protected]>
Co-authored-by: yjh <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Koute <[email protected]>
Co-authored-by: Dmitry Markin <[email protected]>
Co-authored-by: Anthony Lazam <[email protected]>
Co-authored-by: André Silva <[email protected]>
Co-authored-by: Piotr Mikołajczyk <[email protected]>
Co-authored-by: Adrian Catangiu <[email protected]>
Co-authored-by: Ross Bulat <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>

93754780

Aug 02, 2023

Support for multiple signature scheme for BEEFY primitves (#14373) · 3fef703e

drskalman authored Aug 02, 2023



* Merged BEEFY primitives with generic signature and keyset commitment support from old pull to current code

* - Add bls-experimental feature to application-crypto and beefy primitives
- Fix remaining crypto -> ecdsa_crypto
- code build but not tests

* Make beefy primitive tests compile

* move bls related beefy primitives code and test behind bls-experimental flag

* Make BEEFY clients complies with BEEFY API depending on AuthorityId

* - Rename `BeefyAuthoritySet.root` → `BeefyAuthoritySet.keyset_commitment`.
- Remove apk proof keyset_commitment from `BeefyAuthoritySet`.
- Fix failing signed commitment and signature to witness test.
- Make client compatible with BeefyAPI generic on AuthorityId.
- `crypto` → `ecdsa_crypto` in BEEFY client and frame.

* Commit Cargo lock remove ark-serialize from BEEFY primitives

* Use Codec instead of Encode + Decode in primitives/consensus/beefy/src/lib.rs

Co-authored-by: Davide Galassi <[email protected]>

* - Make `BeefyApi` generic over Signature type.
- Make new `BeeyApi` functinos also generic over AuthorityId and Signature

* Unmake BeefyAPI generic over Signature. Recover Signature type from AuthId.

* - dont use hex or hex-literal use array-bytes instead in beefy primitives and bls crypto.
- CamelCase ECDSA and BLS everywhere.

* Move the definition of BEEFY key type from `primitives/beefy` to `crypto.rs` according to new convention.

* - Add bls377_generate_new to `sp-io` and `application_crypto::bls`.
- Add `bls-experimental` to `sp-io`

Does not compile because PassByCodec can not derive PassBy using customly implemented PassByIner.

* Implement PassBy for `bls::Public` manually

* fix Beefy `KEY_TYPE` in `frame/beefy` tests to come from `sp-core::key_types` enum

* specify both generic for `hex2array_unchecked` in `sp-core/bls.rs`

* Rename `crypto`→`ecdsa_crypto` in `primitives/consensus/beefy/src/test_utils.rs` docs

* remove commented-out code in `primitives/consensus/beefy/src/commitment.rs`

Co-authored-by: Davide Galassi <[email protected]>

* Fix inconsistency in panic message in  `primitives/io/src/lib.rs`

Co-authored-by: Davide Galassi <[email protected]>

* Remove redundant feature activation in `primitives/io/Cargo.toml`

Co-authored-by: Davide Galassi <[email protected]>

* - make `w3f-bls` a dev-dependancy only for beefy primitives.

- clean up comments.

Co-authored-by: Davide Galassi <[email protected]>

* export BEEFY KEY_TYPE from primitives/consensus/beefy
make `frame/consensus/beefy` in dependent of sp_crypto_app
use consistent naming in the beefy primitive tests.

* - implement `BeefyAuthorityId` for `bls_crypto::AuthorityId`.
- implement `bls_verify_works` test for BEEFY `bls_crypto`.

* Remove BEEFY `ecdsa_n_bls_crypto` for now for later re-introduction

* Make commitment and witness BEEFY tests not use Keystore.

* put `bls_beefy_verify_works` test under `bls-experimental` flag.

* bump up Runtime `BeefyAPI` to version 3 due to introducing generic AuthorityId.

* reuse code and encapsulate w3f-bls backend in sp-core as most as possible

Co-authored-by: Davide Galassi <[email protected]>

* Make comments in primities BEEFY `commitment.rs` and `witness.rs``tests convention conforming

* Use master dep versions

* Trivial change. Mostly to trigger CI

* Apply suggestions from code review

Co-authored-by: André Silva <[email protected]>

* Fix Cargo.toml

* Trigger CI with cumulus companion

* Trigger CI after polkadot companion change

---------

Co-authored-by: Davide Galassi <[email protected]>
Co-authored-by: André Silva <[email protected]>

3fef703e

Aug 01, 2023

Fix Substrate features (#14660) · 77321288

Oliver Tale-Yazdi authored Aug 01, 2023



* Fix std, runtime-benchmarks and try-runtime features

zepter lint propagate-feature --feature try-runtime --left-side-feature-missing=ignore --workspace --fix --feature-enables-dep="try-runtime:frame-try-runtime"
zepter lint propagate-feature --feature runtime-benchmarks --left-side-feature-missing=ignore --workspace --fix --feature-enables-dep="runtime-benchmarks:frame-benchmarking"
zepter lint propagate-feature --feature std --left-side-feature-missing=ignore --workspace --fix

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add propagate feature CI check

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Test CI by adding an error

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Use --locked

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add help msg

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Revert "Test CI by adding an error"

This reverts commit cf4ff6cc0632269b0a109e547686e5e3314b02de.

* Test CI by adding an error

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* No newline in help msg

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Revert "Test CI by adding an error"

This reverts commit 5daa06ada8e01f5bebafb9d1c76804dd79bc1006.

* Test CI by adding an error

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Revert "Test CI by adding an error"

This reverts commit ca15de5729507a564f140a10ec2e87b19516ec4c.

* Fix msg

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Revert back to master

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Re-do with Zepter v0.7.4

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Update Zepter to 0.7.4

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Disable rococo try-runtime check

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Apply suggestions from code review

Co-authored-by: Bastian Köcher <[email protected]>

* More review fixes

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

77321288

Jul 18, 2023

Don't use fixed nominator count for report_equivocation weight calculation (#14471) · 50a63c30

André Silva authored Jul 18, 2023

* babe: fix report_equivocation weight calculation

* grandpa: fix report_equivocation weight calculation

* beefy: fix report_equivocation weight calculation

* runtime: add missing MaxNominators constant

50a63c30

Jul 14, 2023

Replace system config `Index` for `Nonce` (#14290) · 6a29a70a

juangirini authored Jul 14, 2023

* replace Index by Nonce

* replace Index by Nonce

* replace Index by Nonce

* replace Index by Nonce

* replace Index by Nonce

* wip

* remove index in lieu of nonce

* wip

* remove accountnonce in lieu of nonce

* add minor improvement

* rebase and merge conflicts

6a29a70a

Jul 13, 2023

Moves `Block` to `frame_system` instead of `construct_runtime` and removes... · 5e7b27e9

gupnik authored Jul 13, 2023


Moves `Block` to `frame_system` instead of `construct_runtime` and removes `Header` and `BlockNumber` (#14437)

* Initial setup

* Adds node block

* Uses UncheckedExtrinsic and removes Where section

* Updates frame_system to use Block

* Adds deprecation warning

* Fixes pallet-timestamp

* Removes Header and BlockNumber

* Addresses review comments

* Addresses review comments

* Adds comment about compiler bug

* Removes where clause

* Refactors code

* Fixes errors in cargo check

* Fixes errors in cargo check

* Fixes warnings in cargo check

* Formatting

* Fixes construct_runtime tests

* Uses import instead of full path for BlockNumber

* Uses import instead of full path for Header

* Formatting

* Fixes construct_runtime tests

* Fixes imports in benchmarks

* Formatting

* Fixes construct_runtime tests

* Formatting

* Minor updates

* Fixes construct_runtime ui tests

* Fixes construct_runtime ui tests with 1.70

* Fixes docs

* Fixes docs

* Adds u128 mock block type

* Fixes split example

* fixes for cumulus

* ".git/.scripts/commands/fmt/fmt.sh"

* Updates new tests

* Fixes fully-qualified path in few places

* Formatting

* Update frame/examples/default-config/src/lib.rs

Co-authored-by: Juan <[email protected]>

* Update frame/support/procedural/src/construct_runtime/mod.rs

Co-authored-by: Juan <[email protected]>

* ".git/.scripts/commands/fmt/fmt.sh"

* Addresses some review comments

* Fixes build

* ".git/.scripts/commands/fmt/fmt.sh"

* Update frame/democracy/src/lib.rs

Co-authored-by: Oliver Tale-Yazdi <[email protected]>

* Update frame/democracy/src/lib.rs

Co-authored-by: Oliver Tale-Yazdi <[email protected]>

* Update frame/support/procedural/src/construct_runtime/mod.rs

Co-authored-by: Oliver Tale-Yazdi <[email protected]>

* Update frame/support/procedural/src/construct_runtime/mod.rs

Co-authored-by: Oliver Tale-Yazdi <[email protected]>

* Addresses review comments

* Updates trait bounds

* Minor fix

* ".git/.scripts/commands/fmt/fmt.sh"

* Removes unnecessary bound

* ".git/.scripts/commands/fmt/fmt.sh"

* Updates test

* Fixes build

* Adds a bound for header

* ".git/.scripts/commands/fmt/fmt.sh"

* Removes where block

* Minor fix

* Minor fix

* Fixes tests

* ".git/.scripts/commands/update-ui/update-ui.sh" 1.70

* Updates test

* Update primitives/runtime/src/traits.rs

Co-authored-by: Bastian Köcher <[email protected]>

* Update primitives/runtime/src/traits.rs

Co-authored-by: Bastian Köcher <[email protected]>

* Updates doc

* Updates doc

---------

Co-authored-by: command-bot <>
Co-authored-by: Juan <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

5e7b27e9

Jul 12, 2023

`GenesisBuild<T,I>` deprecated. `BuildGenesisConfig` added. (#14306) · 87d41d0a

Michal Kucharczyk authored Jul 12, 2023



* frame::support: GenesisConfig types for Runtime enabled

* frame::support: macro generating GenesisBuild::build for RuntimeGenesisConfig

* frame: ambiguity BuildStorage vs GenesisBuild fixed

* fix

* RuntimeGenesisBuild added

* Revert "frame: ambiguity BuildStorage vs GenesisBuild fixed"

This reverts commit 950f3d019d0e21c55a739c44cc19cdabd3ff0293.

* Revert "fix"

This reverts commit a2f76dd24e9a16cf9230d45825ed28787211118b.

* Revert "RuntimeGenesisBuild added"

This reverts commit 3c131b618138ced29c01ab8d15d8c6410c9e128b.

* Revert "Revert "frame: ambiguity BuildStorage vs GenesisBuild fixed""

This reverts commit 2b1ecd467231eddec69f8d328039ba48a380da3d.

* Revert "Revert "fix""

This reverts commit fd7fa629adf579d83e30e6ae9fd162637fc45e30.

* Code review suggestions

* frame: BuildGenesisConfig added, BuildGenesis deprecated

* frame: some pallets updated with BuildGenesisConfig

* constuct_runtime: support for BuildGenesisConfig

* frame::support: genesis_build macro supports BuildGenesisConfig

* frame: BuildGenesisConfig added, BuildGenesis deprecated

* Cargo.lock update

* test-runtime: fixes

* Revert "fix"

This reverts commit a2f76dd24e9a16cf9230d45825ed28787211118b.

* Revert "frame: ambiguity BuildStorage vs GenesisBuild fixed"

This reverts commit 950f3d019d0e21c55a739c44cc19cdabd3ff0293.

* self review

* doc fixed

* ui tests fixed

* fmt

* tests fixed

* genesis_build macrto fixed for non-generic GenesisConfig

* BuildGenesisConfig constraints added

* warning fixed

* some duplication removed

* fmt

* fix

* doc tests fix

* doc fix

* cleanup: remove BuildModuleGenesisStorage

* self review comments

* fix

* Update frame/treasury/src/tests.rs

Co-authored-by: Sebastian Kunert <[email protected]>

* Update frame/support/src/traits/hooks.rs

Co-authored-by: Sebastian Kunert <[email protected]>

* doc fix: GenesisBuild exposed

* ".git/.scripts/commands/fmt/fmt.sh"

* frame: more serde(skip) + cleanup

* Update frame/support/src/traits/hooks.rs

Co-authored-by: Davide Galassi <[email protected]>

* frame: phantom fields moved to the end of structs

* chain-spec: Default::default cleanup

* test-runtime: phantom at the end

* merge master fixes

* fix

* fix

* fix

* fix

* fix (facepalm)

* Update frame/support/procedural/src/pallet/expand/genesis_build.rs

Co-authored-by: Bastian Köcher <[email protected]>

* fmt

* fix

* fix

---------

Co-authored-by: parity-processbot <>
Co-authored-by: Sebastian Kunert <[email protected]>
Co-authored-by: Davide Galassi <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

87d41d0a

Jul 09, 2023

remove `OnStakerSlash` replace with `OnStakingEvents` (#14527) · 6dd625d5

Kian Paimani authored Jul 09, 2023



* remove 'OnStakerSlash', replace with 'OnStakingEvents'

* fix other features in pallets

* small fixes

* fix docs

* fix docs

* fix docs

* Update primitives/staking/src/lib.rs

Co-authored-by: Gonçalo Pestana <[email protected]>

---------

Co-authored-by: Gonçalo Pestana <[email protected]>

6dd625d5

Jul 03, 2023
- Fix typo (#14479) (#14480) · 7a2a1b93
  Hugo Trentesaux authored Jul 03, 2023
  
  7a2a1b93
Jun 21, 2023
- Bump `parity-scale-codec` to 3.6.1 (#14428) · 9d1741eb
  Koute authored Jun 21, 2023
  
  9d1741eb
Jun 12, 2023

Update Pallet placeholder struct as per FRAME v2 (#14348) · 4ba78088

Abhijit Roy authored Jun 12, 2023

* Update Pallet placeholder struct as per FRAME v3

* ".git/.scripts/commands/fmt/fmt.sh"

* Update lib.rs

Removed the unused import

---------

Co-authored-by: command-bot <>

4ba78088

Jun 01, 2023

frame: support for serde added (#14261) · dc716127

Michal Kucharczyk authored Jun 01, 2023



* frame: support for serde added

- enabled `serde` features in dependent crates, no gate feature introduced, linker should do the job and strip unused code.

- frame::staking: added impl of `serde::Serialize, serde::Deserialize` for `enum Forcing`

- primitives::runtime: impl_opaque_keys macro provides `Serialize/Deserialize` impl if `serde` is enabled

- primitives::staking: added impl of `serde::Serialize`, `serde::Deserialize` for `enum StakerStatus`

* frame::support: serde for pallets' GenesisConfig enabled in no-std

* Cargo.lock updated

* Update primitives/staking/Cargo.toml

Co-authored-by: Bastian Köcher <[email protected]>

* fix

* Cargo.lock update + missed serde/std in beefy

---------

Co-authored-by: Bastian Köcher <[email protected]>

dc716127

May 31, 2023

Bump serde from 1.0.162 to 1.0.163 (#14271) · 688ac3d1

dependabot[bot] authored May 31, 2023



* Bump serde from 1.0.162 to 1.0.163

Bumps [serde](https://github.com/serde-rs/serde) from 1.0.162 to 1.0.163.
- [Release notes](https://github.com/serde-rs/serde/releases)
- [Commits](https://github.com/serde-rs/serde/compare/v1.0.162...v1.0.163)

---
updated-dependencies:
- dependency-name: serde
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <[email protected]>

* bump ci

* bump ci for cumulus

* bump ci again

---------

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Sam Johnson <[email protected]>

688ac3d1

Bump sp-crates from latest crates.io version + release (#14265) · 3da94490
Alexandru Vasile authored May 31, 2023
```
Signed-off-by: Alexandru Vasile <[email protected]>
```
3da94490

May 29, 2023
- Release: Bump SP crates to release on crates.io (#14237) · 98a0550e
  Alexandru Vasile authored May 29, 2023
```
Signed-off-by: Alexandru Vasile <[email protected]>
```
  98a0550e
May 25, 2023

sc-consensus-beefy: graceful support for pallet-beefy reset (#14217) · b907f520

Adrian Catangiu authored May 25, 2023



BEEFY consensus can be restarted by resetting "genesisBlock" in
pallet-beefy, but we don't want to also reset authority set IDs so
that they are uniquely identified across the entire chain history
regardless of how many times BEEFY consensus has been reset/restarted.

This is why the client now also accepts initial authority_set_id != 0.

BEEFY client now detects pallet-beefy reset/reinit and errors-out and
asks for a restart.
BEEFY client persisted state should be discarded on client restarts
following pallet-beefy reset/reinit.

End result is BEEFY client/voter can now completely reinitialize using
"new" on-chain info following pallet-beefy reset/reinit, discarding old state.

Fixes #14203
Fixes #14204

Signed-off-by: acatangiu <[email protected]>

b907f520

May 24, 2023

HoldReason: Improve usage (#13869) · 05da6d8e

Bastian Köcher authored May 24, 2023



* HoldReason: Improve usage

`HoldReason` was switched recently to use the `composite_enum` attribute that will merge the enums
from all pallets in the runtime to `RuntimeHoldReason`. `pallet-nis` was still requiring that the
variant was passed as constant to call `hold`. The proper implementation is to use the `HoldReason`
from inside the pallet directly when calling `hold`. This is done by adding a `RuntimeHoldReason` as
type to the `Config` trait and requiring that `Currency` is using the same reason. Besides that the
pr changes the name `HoldIdentifier` in `pallet_balances::Config` to `RuntimeHoldReason`.

* Update frame/nis/src/lib.rs

Co-authored-by: Oliver Tale-Yazdi <[email protected]>

* Review comment

* Fixes

---------

Co-authored-by: Oliver Tale-Yazdi <[email protected]>

05da6d8e

May 20, 2023

frame: Enable GenesisConfig in no_std (#14108) · 613420a0

Michal Kucharczyk authored May 20, 2023

* frame: Default for GenesisConfig in no_std

`Default` for `GenesisConfig` will be required for no_std in no native
runtime world. It must be possible to instantiate default GenesisConfig
for pallets and runtime.

* ".git/.scripts/commands/fmt/fmt.sh"

* hash69 in no_std reverted

* derive(DefaultNoBound) for GenesisConfig used when possible

* treasury: derive(Default)

* Cargo.lock update

* genesis_config: compiler error improved

When std feature is not enabled for pallet, the GenesisConfig will be
defined, but serde::{Serialize,Deserialize} traits will not be
implemented.

The compiler error indicates the reason of latter errors.

This is temporary and serde traits will be enabled with together with
`serde` support in frame.

---------

Co-authored-by: command-bot <>

613420a0

May 11, 2023

Staking::{bond, set_controller} to set controllers to stash only. (#14039) · 56940bc8

Ross Bulat authored May 12, 2023



* update set_controller

* clone

* bond uses `stash`

* remove controller from bond(), chill_other test works

* remove ctlr from testing_utils &  dead ctlr -> dead payee

* mvs controllers to stashes for 3 tests

* migrate mock bond fns & fix 1 test

* mvs controllers to stashes for 7 tests

* mvs controllers to stashes for 9 tests

* remove double_controlling_should_fail

* remove double_staking_should_fail

* mvs controllers to stashes for 10 tests

* mvs controllers to stashes for 2 tests

* remove payout_creates_controller

* mvs controllers to stashes for 27 tests

* remove println!

* fix rewards_should_work

* fix test_payout_stakers

* fix bond benchmark

* clone

* rm unused import

* rm unused var

* rm controller from create_offender

* fix GenesisConfig stakers

* fix controllers in consensus pallets

* fix unqiue controller in chain_spec

* fmt

* fix create_offender

* fix set_controller benchmark

* add TODO

* create_unique_stash_controller

* staking benchmarks working

* fmt

* fix args

* rm println

* import

* import

* fix fast unstake tests

* fix staking-tests-e2e

* fix root-offenses

* fmt

* differentiate controller to stash

* bring back change_controller_works w. unique ctrl

* bring back double_staking_should_fail

* double_controlling_attempt_should_fail

* bring back payout_creates_controller

* add commnet to controller balances

* + set_controller call description

* fmt

* rm clones

* fmt

* clippy fixes

* fmt

* update README

* small fixes

* use controller_to_be_deprecated

* .comment

* comment

* bump zombienet version

* ci

---------

Co-authored-by: parity-processbot <>
Co-authored-by: Javier Viola <[email protected]>

56940bc8

Apr 12, 2023

[Deps] Bump scale-info to match cumulus and polkadot (#13873) · 376a288f

Roman Useinov authored Apr 12, 2023

* [Deps] Bump scale-info to match cumulus and polkadot

* fix Cargo.lock

* fix identity

* more fixes

* fix

* fixes

* more fixes

376a288f

Mar 18, 2023

Deprecate `Currency`; introduce holds and freezing into `fungible` traits (#12951) · 5d81f23f

Gavin Wood authored Mar 18, 2023



* First reworking of fungibles API

* New API and docs

* More fungible::* API improvements

* New ref-counting logic for old API

* Missing files

* Fixes

* Use the new transfer logic

* Use fungibles for the dispatchables

* Use shelve/restore names

* Locking works with total balance.

* repotting and removal

* Separate Holds from Reserves

* Introduce freezes

* Missing files

* Tests for freezing

* Fix hold+freeze combo

* More tests

* Fee-free dispatchable for upgrading accounts

* Benchmarks and a few fixes

* Another test

* Docs and refactor to avoid blanket impls

* Repot

* Fit out ItemOf fully

* Add events to Balanced traits

* Introduced events into Hold traits

* Fix Assets pallet tests

* Assets benchmarks pass

* Missing files and fixes

* Fixes

* Fixes

* Benchmarks fixes

* Fix balance benchmarks

* Formatting

* Expose fungible sub modules

* Move NIS to fungible API

* Fix broken impl and add test

* Fix tests

* API for `transfer_and_hold`

* Use composite APIs

* Formatting

* Upgraded event

* Fixes

* Fixes

* Fixes

* Fixes

* Repot tests and some fixed

* Fix some bits

* Fix dust tests

* Rename `set_balance`

- `Balances::set_balance` becomes `Balances::force_set_balance`
- `Unbalanced::set_balance` becomes `Unbalances::write_balance`

* becomes

* Move dust handling to fungibles API

* Formatting

* Fixes and more refactoring

* Fixes

* Fixes

* Fixes

* Fixes

* Fixes

* Fixes

* Fixes

* Fixes

* Fixes

* Use reducible_balance for better correctness on fees

* Reducing hold to zero should remove entry.

* Add test

* Docs

* Update frame/support/src/traits/tokens/fungibles/hold.rs

Co-authored-by: Muharem Ismailov <[email protected]>

* Update frame/support/src/traits/tokens/fungibles/regular.rs

Co-authored-by: Muharem Ismailov <[email protected]>

* Update frame/support/src/traits/tokens/fungible/hold.rs

Co-authored-by: Muharem Ismailov <[email protected]>

* Update frame/support/src/traits/tokens/fungible/regular.rs

Co-authored-by: Muharem Ismailov <[email protected]>

* Docs

* Docs

* Docs

* Fix NIS benchmarks

* Doc comment

* Remove post_mutation

* Fix some tests

* Fix some grumbles

* Enumify bool args to fungible(s) functions

* Fix up assets and balances

* Formatting

* Fix contracts

* Fix tests & benchmarks build

* Typify minted boolean arg

* Typify on_hold boolean arg; renames

* Fix numerous tests

* Fix dependency issue

* Privatize dangerous API mutate_account

* Fix contracts (@alext - please check this commit)

* Remove println

* Fix tests for contracts

* Fix broken rename

* Fix broken rename

* Fix broken rename

* Docs

* Update frame/support/src/traits/tokens/fungible/hold.rs

Co-authored-by: Anthony Alaribe <[email protected]>

* remove from_ref_time

* Update frame/executive/src/lib.rs

Co-authored-by: Anthony Alaribe <[email protected]>

* Update frame/executive/src/lib.rs

Co-authored-by: Anthony Alaribe <[email protected]>

* Reenable test

* Update frame/support/src/traits/tokens/fungibles/hold.rs

Co-authored-by: Anthony Alaribe <[email protected]>

* Update frame/support/src/traits/tokens/fungible/hold.rs

Co-authored-by: Anthony Alaribe <[email protected]>

* Update frame/support/src/traits/tokens/fungible/hold.rs

Co-authored-by: Anthony Alaribe <[email protected]>

* Update frame/support/src/traits/tokens/fungible/hold.rs

Co-authored-by: Anthony Alaribe <[email protected]>

* Update frame/support/src/traits/tokens/currency.rs

Co-authored-by: Anthony Alaribe <[email protected]>

* Update frame/lottery/src/tests.rs

Co-authored-by: Anthony Alaribe <[email protected]>

* Update frame/support/src/traits/tokens/fungible/mod.rs

Co-authored-by: Anthony Alaribe <[email protected]>

* Update frame/support/src/traits/tokens/fungible/regular.rs

Co-authored-by: Anthony Alaribe <[email protected]>

* Update frame/support/src/traits/tokens/fungibles/freeze.rs

Co-authored-by: Anthony Alaribe <[email protected]>

* Update frame/support/src/traits/tokens/fungible/regular.rs

Co-authored-by: Anthony Alaribe <[email protected]>

* Update frame/support/src/traits/tokens/fungibles/hold.rs

Co-authored-by: Anthony Alaribe <[email protected]>

* Update frame/support/src/traits/tokens/fungibles/hold.rs

Co-authored-by: Anthony Alaribe <[email protected]>

* Update frame/support/src/traits/tokens/fungibles/hold.rs

Co-authored-by: Anthony Alaribe <[email protected]>

* Rename UnwantedRemoval to UnwantedAccountRemoval

* Docs

* Formatting

* Update frame/balances/src/lib.rs

Co-authored-by: Oliver Tale-Yazdi <[email protected]>

* Update primitives/runtime/src/lib.rs

Co-authored-by: Keith Yeung <[email protected]>

* handle_raw_dust oes nothing

* Formatting

* Fixes

* Grumble

* Fixes

* Add test

* Add test

* Tests for reducible_balance

* Fixes

* Fix Salary

* Fixes

* Disable broken test

* Disable nicely

* Fixes

* Fixes

* Fixes

* Rename some events

* Fix nomination pools breakage

* Add compatibility stub for transfer tx

* Reinstate a safely compatible version of Balances set_balance

* Fixes

* Grumble

* Update frame/nis/src/lib.rs

Co-authored-by: Kian Paimani <[email protected]>

* ".git/.scripts/commands/bench/bench.sh" pallet dev pallet_balances

* disable flakey tests

* Update frame/balances/src/lib.rs

Co-authored-by: Kian Paimani <[email protected]>

* Grumbles

* Grumble

---------

Co-authored-by: Muharem Ismailov <[email protected]>
Co-authored-by: Alexander Theißen <[email protected]>
Co-authored-by: Anthony Alaribe <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Keith Yeung <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: command-bot <>

5d81f23f