- Feb 28, 2024
-
-
Oliver Tale-Yazdi authoredThis MR is the merge of https://github.com/paritytech/substrate/pull/14414 and https://github.com/paritytech/substrate/pull/14275. It implements [RFC#13](https://github.com/polkadot-fellows/RFCs/pull/13), closes https://github.com/paritytech/polkadot-sdk/issues/198. ----- This Merge request introduces three major topicals: 1. Multi-Block-Migrations 1. New pallet `poll` hook for periodic service work 1. Replacement hooks for `on_initialize` and `on_finalize` in cases where `poll` cannot be used and some more general changes to FRAME. The changes for each topical span over multiple crates. They are listed in topical order below. # 1.) Multi-Block-Migrations Multi-Block-Migrations are facilitated by creating `pallet_migrations` and configuring `System::Config::MultiBlockMigrator` to point to it. Executive picks this up and triggers one step of the migrations pallet per block. The chain is in lockdown mode for as long as an MBM is ongoing. Executive does this by polling `MultiBlockMigrator::ongoing` and not allowing any transaction in a block, if true. A MBM is defined through trait `SteppedMigration`. A condensed version looks like this: ```rust /// A migration that can proceed in multiple steps. pub trait SteppedMigration { type Cursor: FullCodec + MaxEncodedLen; type Identifier: FullCodec + MaxEncodedLen; fn id() -> Self::Identifier; fn max_steps() -> Option<u32>; fn step( cursor: Option<Self::Cursor>, meter: &mut WeightMeter, ) -> Result<Option<Self::Cursor>, SteppedMigrationError>; } ``` `pallet_migrations` can be configured with an aggregated tuple of these migrations. It then starts to migrate them one-by-one on the next runtime upgrade. Two things are important here: - 1. Doing another runtime upgrade while MBMs are ongoing is not a good idea and can lead to messed up state. - 2. **Pallet Migrations MUST BE CONFIGURED IN `System::Config`, otherwise it is not used.** The pallet supports an `UpgradeStatusHandler` that can be used to notify external logic of upgrade start/finish (for example to pause XCM dispatch). Error recovery is very limited in the case that a migration errors or times out (exceeds its `max_steps`). Currently the runtime dev can decide in `FailedMigrationHandler::failed` how to handle this. One follow-up would be to pair this with the `SafeMode` pallet and enact safe mode when an upgrade fails, to allow governance to rescue the chain. This is currently not possible, since governance is not `Mandatory`. ## Runtime API - `Core`: `initialize_block` now returns `ExtrinsicInclusionMode` to inform the Block Author whether they can push transactions. ### Integration Add it to your runtime implementation of `Core` and `BlockBuilder`: ```patch diff --git a/runtime/src/lib.rs b/runtime/src/lib.rs @@ impl_runtime_apis! { impl sp_block_builder::Core<Block> for Runtime { - fn initialize_block(header: &<Block as BlockT>::Header) { + fn initialize_block(header: &<Block as BlockT>::Header) -> RuntimeExecutiveMode { Executive::initialize_block(header) } ... } ``` # 2.) `poll` hook A new pallet hook is introduced: `poll`. `Poll` is intended to replace mostly all usage of `on_initialize`. The reason for this is that any code that can be called from `on_initialize` cannot be migrated through an MBM. Currently there is no way to statically check this; the implication is to use `on_initialize` as rarely as possible. Failing to do so can result in broken storage invariants. The implementation of the poll hook depends on the `Runtime API` changes that are explained above. # 3.) Hard-Deadline callbacks Three new callbacks are introduced and configured on `System::Config`: `PreInherents`, `PostInherents` and `PostTransactions`. These hooks are meant as replacement for `on_initialize` and `on_finalize` in cases where the code that runs cannot be moved to `poll`. The reason for this is to make the usage of HD-code (hard deadline) more explicit - again to prevent broken invariants by MBMs. # 4.) FRAME (general changes) ## `frame_system` pallet A new memorize storage item `InherentsApplied` is added. It is used by executive to track whether inherents have already been applied. Executive and can then execute the MBMs directly between inherents and transactions. The `Config` gets five new items: - `SingleBlockMigrations` this is the new way of configuring migrations that run in a single block. Previously they were defined as last generic argument of `Executive`. This shift is brings all central configuration about migrations closer into view of the developer (migrations that are configured in `Executive` will still work for now but is deprecated). - `MultiBlockMigrator` this can be configured to an engine that drives MBMs. One example would be the `pallet_migrations`. Note that this is only the engine; the exact MBMs are injected into the engine. - `PreInherents` a callback that executes after `on_initialize` but before inherents. - `PostInherents` a callback that executes after all inherents ran (including MBMs and `poll`). - `PostTransactions` in symmetry to `PreInherents`, this one is called before `on_finalize` but after all transactions. A sane default is to set all of these to `()`. Example diff suitable for any chain: ```patch @@ impl frame_system::Config for Test { type MaxConsumers = ConstU32<16>; + type SingleBlockMigrations = (); + type MultiBlockMigrator = (); + type PreInherents = (); + type PostInherents = (); + type PostTransactions = (); } ``` An overview of how the block execution now looks like is here. The same graph is also in the rust doc. <details><summary>Block Execution Flow</summary> <p>  </p> </details> ## Inherent Order Moved to https://github.com/paritytech/polkadot-sdk/pull/2154 --------------- ## TODO - [ ] Check that `try-runtime` still works - [ ] Ensure backwards compatibility with old Runtime APIs - [x] Consume weight correctly - [x] Cleanup --------- Signed-off-by:Oliver Tale-Yazdi <[email protected]> Co-authored-by:
Liam Aharon <[email protected]> Co-authored-by:
Juan Girini <[email protected]> Co-authored-by: command-bot <> Co-authored-by:
Francisco Aguirre <[email protected]> Co-authored-by:
Gavin Wood <[email protected]> Co-authored-by:
Bastian Köcher <[email protected]>
-
- Feb 23, 2024
-
-
PG Herveou authored
Add a `ApiVersion` constant to the pallet-contracts Config to communicate with developers the current state of the host functions exposed by the pallet
-
- Feb 20, 2024
-
-
Oliver Tale-Yazdi authored
Lifting some more dependencies to the workspace. Just using the most-often updated ones for now. It can be reproduced locally. ```sh # First you can check if there would be semver incompatible bumps (looks good in this case): $ zepter transpose dependency lift-to-workspace --ignore-errors syn quote thiserror "regex:^serde.*" # Then apply the changes: $ zepter transpose dependency lift-to-workspace --version-resolver=highest syn quote thiserror "regex:^serde.*" --fix # And format the changes: $ taplo format --config .config/taplo.toml ``` --------- Signed-off-by:
-
- Feb 16, 2024
-
-
Dónal Murray authored
This brings functionality to Westend's Coretime Chain runtime, where previously it was not much more than a shell. It is assumed that the Coretime pallet will have the same index in the Westend runtime as it does in Rococo for the runtime calls. TODO: - [x] Generate chainspec - [x] Regenerate weights - [x] Check hardcoded RuntimeCall weights against relay weights for transacts Aura key generation: https://github.com/paritytech/devops/issues/2725 --------- Co-authored-by: command-bot <> Co-authored-by:
Anton Vilhelm Ásgeirsson <[email protected]>
-
dependabot[bot] authored
Bumps the known_good_semver group with 6 updates: | Package | From | To | | --- | --- | --- | | [serde](https://github.com/serde-rs/serde) | `1.0.195` | `1.0.196` | | [serde_json](https://github.com/serde-rs/json) | `1.0.111` | `1.0.113` | | [clap](https://github.com/clap-rs/clap) | `4.4.18` | `4.5.0` | | [syn](https://github.com/dtolnay/syn) | `2.0.48` | `2.0.49` | | [serde_yaml](https://github.com/dtolnay/serde-yaml) | `0.9.30` | `0.9.31` | | [serde_derive](https://github.com/serde-rs/serde) | `1.0.195` | `1.0.196` | Updates `serde` from 1.0.195 to 1.0.196 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/serde/releases">serde's releases</a>.</em></p> <blockquote> <h2>v1.0.196</h2> <ul> <li>Improve formatting of "invalid type" error messages involving floats (<a href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/serde/commit/ede9762a583c3cc3b87c10a53551828fad339525"><code>ede9762</code></a> Release 1.0.196</li> <li><a href="https://github.com/serde-rs/serde/commit/d438c2d67bf30e3edab31c2272c4829c12cf4cb5"><code>d438c2d</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a> from dtolnay/decimalpoint</li> <li><a href="https://github.com/serde-rs/serde/commit/bef110b92a171ac568a47339f5bd97938a8c9da2"><code>bef110b</code></a> Format Unexpected::Float with decimal point</li> <li><a href="https://github.com/serde-rs/serde/commit/b971ef11d1b53da7673e0c8199e87509c003c1a8"><code>b971ef1</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2681">#2681</a> from dtolnay/workspacedeps</li> <li><a href="https://github.com/serde-rs/serde/commit/29d9f693996d199748136d5561a971ed68626724"><code>29d9f69</code></a> Fix workspace.dependencies default-features future compat warning</li> <li><a href="https://github.com/serde-rs/serde/commit/aecb4083bde754155752f5d7d442b64eb7dc636f"><code>aecb408</code></a> Sort workspace dependencies</li> <li><a href="https://github.com/serde-rs/serde/commit/1c675ab3a38e46df4e62465800970f8b20a2055d"><code>1c675ab</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2678">#2678</a> from rodoufu/workspaceDependencies</li> <li><a href="https://github.com/serde-rs/serde/commit/dd619630a337139424725697ccd9a9f7596a2d3a"><code>dd61963</code></a> Adding workspace dependencies</li> <li><a href="https://github.com/serde-rs/serde/commit/111803ab0768d010c606f2fc0d0add12750d5eef"><code>111803a</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2673">#2673</a> from Sky9x/msrv-badge</li> <li><a href="https://github.com/serde-rs/serde/commit/0024f74f34fbbdc44a7b22457faebe36c5cbe7f8"><code>0024f74</code></a> Use shields.io's MSRV badges</li> <li>See full diff in <a href="https://github.com/serde-rs/serde/compare/v1.0.195...v1.0.196">compare view</a></li> </ul> </details> <br /> Updates `serde_json` from 1.0.111 to 1.0.113 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/json/releases">serde_json's releases</a>.</em></p> <blockquote> <h2>v1.0.113</h2> <ul> <li>Add <code>swap_remove</code> and <code>shift_remove</code> methods on Map (<a href="https://redirect.github.com/serde-rs/json/issues/1109">#1109</a>)</li> </ul> <h2>v1.0.112</h2> <ul> <li>Improve formatting of "invalid type" error messages involving floats (<a href="https://redirect.github.com/serde-rs/json/issues/1107">#1107</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/json/commit/09d865b34b9701be52764dc9bf571b1a16e9d3dc"><code>09d865b</code></a> Release 1.0.113</li> <li><a href="https://github.com/serde-rs/json/commit/5aeab4eaf69d7959f013f8081865c264d6c00551"><code>5aeab4e</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/json/issues/1109">#1109</a> from serde-rs/remove</li> <li><a href="https://github.com/serde-rs/json/commit/ca3c2ca3696cab79b8b279be7569ee1647250f1e"><code>ca3c2ca</code></a> Add swap_remove and shift_remove methods on Map</li> <li><a href="https://github.com/serde-rs/json/commit/7fece969e3b480ec620419d65c2aeb08776bebcb"><code>7fece96</code></a> Release 1.0.112</li> <li><a href="https://github.com/serde-rs/json/commit/6a6d2bbd9e8b8bd72573b863f12a4ec991f33232"><code>6a6d2bb</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/json/issues/1107">#1107</a> from serde-rs/unexpectedfloat</li> <li><a href="https://github.com/serde-rs/json/commit/83d7bad54ba5db3a44198d6df0ff2e81621683fa"><code>83d7bad</code></a> Format f64 in error messages using ryu</li> <li><a href="https://github.com/serde-rs/json/commit/107c2d1c42817f0d71f07a4d5b0ea2f29dbce8b8"><code>107c2d1</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/json/issues/1106">#1106</a> from serde-rs/invalidvalue</li> <li><a href="https://github.com/serde-rs/json/commit/62ca3e4c01c2e62cd5c2a32e9104f386e5ce7808"><code>62ca3e4</code></a> Handle Unexpected::Unit in Error::invalid_value</li> <li><a href="https://github.com/serde-rs/json/commit/296fafb8f32e8442ef8e4d5725c15ffca726b288"><code>296fafb</code></a> Factor out JSON-specific Display impl for serde::de::Unexpected</li> <li><a href="https://github.com/serde-rs/json/commit/e56cc696bd7c112e5dd4ccfa23d094c3a1c1c1ff"><code>e56cc69</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/json/issues/1105">#1105</a> from keienWang/master</li> <li>Additional commits viewable in <a href="https://github.com/serde-rs/json/compare/v1.0.111...v1.0.113">compare view</a></li> </ul> </details> <br /> Updates `clap` from 4.4.18 to 4.5.0 <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's changelog</a>.</em></p> <blockquote> <h2>[4.5.0] - 2024-02-08</h2> <h3>Compatibility</h3> <ul> <li>Update MSRV to 1.74</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/clap-rs/clap/commit/a751c5fe65cd33cb09e85ff3039b4fd0182cdb6e"><code>a751c5f</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/9ec6c942b81c370a8c14652e42295933244555ac"><code>9ec6c94</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/0735119775c2d27fef6b3c232cb9ef2fcbbd963f"><code>0735119</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/c4d3959506f5068f86ffb7ab34b622bd2da40dd8"><code>c4d3959</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5344">#5344</a> from epage/encode</li> <li><a href="https://github.com/clap-rs/clap/commit/f750e577789e1dd34c6950d8c8fe16d1bfd1f49c"><code>f750e57</code></a> fix(lex): Use new-ish OsStr API</li> <li><a href="https://github.com/clap-rs/clap/commit/1d9a554cdfddffcb92d197706b9720e2760cb443"><code>1d9a554</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5343">#5343</a> from epage/msrv</li> <li><a href="https://github.com/clap-rs/clap/commit/4b45d361b1b96eb1f37b7d1db2684203ca828a94"><code>4b45d36</code></a> chore: Update MSRV to 1.74</li> <li><a href="https://github.com/clap-rs/clap/commit/55b1f945157d4d0e480dea6c492e04d0b541088a"><code>55b1f94</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5342">#5342</a> from epage/divan</li> <li><a href="https://github.com/clap-rs/clap/commit/ea77b98da3f321069ae136a241a2d266c2b28bd7"><code>ea77b98</code></a> test(complete): Make it order independent</li> <li><a href="https://github.com/clap-rs/clap/commit/b0fea2bac60819bdb042e10c032817fded67f815"><code>b0fea2b</code></a> test(bench): Switch to divan</li> <li>Additional commits viewable in <a href="https://github.com/clap-rs/clap/compare/v4.4.18...clap_complete-v4.5.0">compare view</a></li> </ul> </details> <br /> Updates `syn` from 2.0.48 to 2.0.49 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/dtolnay/syn/releases">syn's releases</a>.</em></p> <blockquote> <h2>2.0.49</h2> <ul> <li>Improve error location when parsing from an empty string literal using <code>LitStr::parse</code> (<a href="https://redirect.github.com/dtolnay/syn/issues/1590">#1590</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/dtolnay/syn/commit/e64c0636042bcd8cf56f9e6c3e828a49cb434649"><code>e64c063</code></a> Release 2.0.49</li> <li><a href="https://github.com/dtolnay/syn/commit/981359c5f46f25f3db42d1b341cc607f634688e7"><code>981359c</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/syn/issues/1590">#1590</a> from dtolnay/streof</li> <li><a href="https://github.com/dtolnay/syn/commit/51298d40a447b9e5b3cd8c898c2ea9d24b31cd6d"><code>51298d4</code></a> Improve error location at eof in LitStr::parse</li> <li><a href="https://github.com/dtolnay/syn/commit/270c63384a9d891f65880a03a5a92f0bf4605bbf"><code>270c633</code></a> Update test suite to nightly-2024-02-13</li> <li><a href="https://github.com/dtolnay/syn/commit/dc9cf16b9b0601d2d393d059c46a8f8e0220cc21"><code>dc9cf16</code></a> Remove FilterAttrs trait when unused</li> <li><a href="https://github.com/dtolnay/syn/commit/7dcfac79eda716fa806d68cc0aa811f3be717dc0"><code>7dcfac7</code></a> Ignore dead_code warning in test</li> <li><a href="https://github.com/dtolnay/syn/commit/98318441089f9a9bb596fc010ed14c3b593d4bda"><code>9831844</code></a> Update signature of Emitter::emit_diagnostic in nightly-2024-02-07</li> <li><a href="https://github.com/dtolnay/syn/commit/9e8033f63da93dfb6a3e698449c6edff5e56727d"><code>9e8033f</code></a> Update test suite to nightly-2024-02-07</li> <li><a href="https://github.com/dtolnay/syn/commit/cb3348cd94be50995054796facdfa055b6e0e9e8"><code>cb3348c</code></a> Update test suite to nightly-2024-01-23</li> <li><a href="https://github.com/dtolnay/syn/commit/15b9dbcd67bc56f3da7d33bbede46f7380fc7164"><code>15b9dbc</code></a> Update test suite to nightly-2024-01-19</li> <li>Additional commits viewable in <a href="https://github.com/dtolnay/syn/compare/2.0.48...2.0.49">compare view</a></li> </ul> </details> <br /> Updates `serde_yaml` from 0.9.30 to 0.9.31 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/dtolnay/serde-yaml/releases">serde_yaml's releases</a>.</em></p> <blockquote> <h2>0.9.31</h2> <ul> <li>Add <code>swap_remove</code> and <code>shift_remove</code> methods on Mapping (<a href="https://redirect.github.com/dtolnay/serde-yaml/issues/408">#408</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/dtolnay/serde-yaml/commit/2a77483b23897115bdd69af32ae34d593268d555"><code>2a77483</code></a> Release 0.9.31</li> <li><a href="https://github.com/dtolnay/serde-yaml/commit/d8d1a839cf42ef4627c66bebd743f5fecd24e3ed"><code>d8d1a83</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/serde-yaml/issues/408">#408</a> from dtolnay/remove</li> <li><a href="https://github.com/dtolnay/serde-yaml/commit/f8a99a496836ccfa6c547af9136986d13011be98"><code>f8a99a4</code></a> Add swap_remove and shift_remove methods on Mapping</li> <li><a href="https://github.com/dtolnay/serde-yaml/commit/8b26413e3307e39329dc68a96b065058aec38f9a"><code>8b26413</code></a> Work around dead_code warning in tests</li> <li>See full diff in <a href="https://github.com/dtolnay/serde-yaml/compare/0.9.30...0.9.31">compare view</a></li> </ul> </details> <br /> Updates `serde_derive` from 1.0.195 to 1.0.196 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/serde/releases">serde_derive's releases</a>.</em></p> <blockquote> <h2>v1.0.196</h2> <ul> <li>Improve formatting of "invalid type" error messages involving floats (<a href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/serde/commit/ede9762a583c3cc3b87c10a53551828fad339525"><code>ede9762</code></a> Release 1.0.196</li> <li><a href="https://github.com/serde-rs/serde/commit/d438c2d67bf30e3edab31c2272c4829c12cf4cb5"><code>d438c2d</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a> from dtolnay/decimalpoint</li> <li><a href="https://github.com/serde-rs/serde/commit/bef110b92a171ac568a47339f5bd97938a8c9da2"><code>bef110b</code></a> Format Unexpected::Float with decimal point</li> <li><a href="https://github.com/serde-rs/serde/commit/b971ef11d1b53da7673e0c8199e87509c003c1a8"><code>b971ef1</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2681">#2681</a> from dtolnay/workspacedeps</li> <li><a href="https://github.com/serde-rs/serde/commit/29d9f693996d199748136d5561a971ed68626724"><code>29d9f69</code></a> Fix workspace.dependencies default-features future compat warning</li> <li><a href="https://github.com/serde-rs/serde/commit/aecb4083bde754155752f5d7d442b64eb7dc636f"><code>aecb408</code></a> Sort workspace dependencies</li> <li><a href="https://github.com/serde-rs/serde/commit/1c675ab3a38e46df4e62465800970f8b20a2055d"><code>1c675ab</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2678">#2678</a> from rodoufu/workspaceDependencies</li> <li><a href="https://github.com/serde-rs/serde/commit/dd619630a337139424725697ccd9a9f7596a2d3a"><code>dd61963</code></a> Adding workspace dependencies</li> <li><a href="https://github.com/serde-rs/serde/commit/111803ab0768d010c606f2fc0d0add12750d5eef"><code>111803a</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2673">#2673</a> from Sky9x/msrv-badge</li> <li><a href="https://github.com/serde-rs/serde/commit/0024f74f34fbbdc44a7b22457faebe36c5cbe7f8"><code>0024f74</code></a> Use shields.io's MSRV badges</li> <li>See full diff in <a href="https://github.com/serde-rs/serde/compare/v1.0.195...v1.0.196">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by:
dependabot[bot] <[email protected]> Co-authored-by:
dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
-
- Feb 12, 2024
-
-
Oliver Tale-Yazdi authored
Changes (partial https://github.com/paritytech/polkadot-sdk/issues/994): - Set log to `0.4.20` everywhere - Lift `log` to the workspace Starting with a simpler one after seeing https://github.com/paritytech/polkadot-sdk/pull/2065 from @jsdw . This sets the `default-features` to `false` in the root and then overwrites that in each create to its original value. This is necessary since otherwise the `default` features are additive and its impossible to disable them in the crate again once they are enabled in the workspace. I am using a tool to do this, so its mostly a test to see that it works as expected. --------- Signed-off-by:
-
- Feb 08, 2024
-
-
Oliver Tale-Yazdi authored
Closes #169 Fork of the `orml-parameters-pallet` as introduced by https://github.com/open-web3-stack/open-runtime-module-library/pull/927 (cc @xlc) It greatly changes how the macros work, but keeps the pallet the same. The downside of my code is now that it does only support constant keys in the form of types, not value-bearing keys. I think this is an acceptable trade off, give that it can be used by *any* pallet without any changes. The pallet allows to dynamically set parameters that can be used in pallet configs while also restricting the updating on a per-key basis. The rust-docs contains a complete example. Changes: - Add `parameters-pallet` - Use in the kitchensink as demonstration - Add experimental attribute to define dynamic params in the runtime. - Adding a bunch of traits to `frame_support::traits::dynamic_params` that can be re-used by the ORML macros ## Example First to define the parameters in the runtime file. The syntax is very explicit about the codec index and errors if there is no. ```rust #[dynamic_params(RuntimeParameters, pallet_parameters::Parameters::<Runtime>))] pub mod dynamic_params { use super::*; #[dynamic_pallet_params] #[codec(index = 0)] pub mod storage { /// Configures the base deposit of storing some data. #[codec(index = 0)] pub static BaseDeposit: Balance = 1 * DOLLARS; /// Configures the per-byte deposit of storing some data. #[codec(index = 1)] pub static ByteDeposit: Balance = 1 * CENTS; } #[dynamic_pallet_params] #[codec(index = 1)] pub mod contracts { #[codec(index = 0)] pub static DepositPerItem: Balance = deposit(1, 0); #[codec(index = 1)] pub static DepositPerByte: Balance = deposit(0, 1); } } ``` Then the pallet is configured with the aggregate: ```rust impl pallet_parameters::Config for Runtime { type AggregratedKeyValue = RuntimeParameters; type AdminOrigin = EnsureRootWithSuccess<AccountId, ConstBool<true>>; ... } ``` And then the parameters can be used in a pallet config: ```rust impl pallet_preimage::Config for Runtime { type DepositBase = dynamic_params::storage::DepositBase; } ``` A custom origin an be defined like this: ```rust pub struct DynamicParametersManagerOrigin; impl EnsureOriginWithArg<RuntimeOrigin, RuntimeParametersKey> for DynamicParametersManagerOrigin { type Success = (); fn try_origin( origin: RuntimeOrigin, key: &RuntimeParametersKey, ) -> Result<Self::Success, RuntimeOrigin> { match key { RuntimeParametersKey::Storage(_) => { frame_system::ensure_root(origin.clone()).map_err(|_| origin)?; return Ok(()) }, RuntimeParametersKey::Contract(_) => { frame_system::ensure_root(origin.clone()).map_err(|_| origin)?; return Ok(()) }, } } #[cfg(feature = "runtime-benchmarks")] fn try_successful_origin(_key: &RuntimeParametersKey) -> Result<RuntimeOrigin, ()> { Ok(RuntimeOrigin::Root) } } ``` --------- Signed-off-by:Nikhil Gupta <[email protected]> Co-authored-by:
Kian Paimani <[email protected]> Co-authored-by: command-bot <>
-
- Feb 06, 2024
-
-
Oliver Tale-Yazdi authored
Superseeds https://github.com/paritytech/polkadot-sdk/pull/1245 This PR is a migration of the https://github.com/paritytech/substrate/pull/14577. The PR added associated types (`AddOrigin` & `RemoveOrigin`) to `Config`. It allows you to decouple types and areas of responsibility, since at the moment the same types are responsible for adding and promoting(removing and demoting). This will improve the flexibility of the pallet configuration. ``` /// The origin required to add a member. type AddOrigin: EnsureOrigin<Self::RuntimeOrigin, Success = ()>; /// The origin required to remove a member. The success value indicates the /// maximum rank *from which* the removal may be. type RemoveOrigin: EnsureOrigin<Self::RuntimeOrigin, Success = Rank>; ``` To achieve the backward compatibility, the users of the pallet can use the old type via the new morph: ``` type AddOrigin = MapSuccess<Self::PromoteOrigin, Ignore>; type RemoveOrigin = Self::DemoteOrigin; ``` --------- Signed-off-by:
PraetorP <[email protected]> Co-authored-by:
Pavel Orlov <[email protected]>
-
- Jan 31, 2024
-
-
Oliver Tale-Yazdi authored
Fixup for https://github.com/paritytech/polkadot-sdk/pull/2587 to make the `core-fellowship` crate work with swapped members. Adds a `MemberSwappedHandler` to the `ranked-collective` pallet that are implemented by `core-fellowship+salary`. There is are exhaustive tests [here](https://github.com/paritytech/polkadot-sdk/blob/72aa7ac1/substrate/frame/core-fellowship/src/tests/integration.rs#L338) and [here](https://github.com/paritytech/polkadot-sdk/blob/ab3cdb05 /substrate/frame/salary/src/tests/integration.rs#L224) to check that adding member `1` is equivalent to adding member `0` and then swapping. --------- Signed-off-by:
-
Branislav Kontur authored
[frame] `#[pallet::composite_enum]` improved variant count handling + removed `pallet_balances`'s `MaxHolds` config (#2657) I started this investigation/issue based on @liamaharon question [here](https://github.com/paritytech/polkadot-sdk/pull/1801#discussion_r1410452499). ## Problem The `pallet_balances` integrity test should correctly detect that the runtime has correct distinct `HoldReasons` variant count. I assume the same situation exists for RuntimeFreezeReason. It is not a critical problem, if we set `MaxHolds` with a sufficiently large value, everything should be ok. However, in this case, the integrity_test check becomes less useful. **Situation for "any" runtime:** - `HoldReason` enums from different pallets: ```rust /// from pallet_nis #[pallet::composite_enum] pub enum HoldReason { NftReceipt, } /// from pallet_preimage #[pallet::composite_enum] pub enum HoldReason { Preimage, } // from pallet_state-trie-migration #[pallet::composite_enum] pub enum HoldReason { SlashForContinueMigrate, SlashForMigrateCustomTop, SlashForMigrateCustomChild, } ``` - generated `RuntimeHoldReason` enum looks like: ```rust pub enum RuntimeHoldReason { #[codec(index = 32u8)] Preimage(pallet_preimage::HoldReason), #[codec(index = 38u8)] Nis(pallet_nis::HoldReason), #[codec(index = 42u8)] StateTrieMigration(pallet_state_trie_migration::HoldReason), } ``` - composite enum `RuntimeHoldReason` variant count is detected as `3` - we set `type MaxHolds = ConstU32<3>` - `pallet_balances::integrity_test` is ok with `3`(at least 3) However, the real problem can occur in a live runtime where some functionality might stop working. This is due to a total of 5 distinct hold reasons (for pallets with multi-instance support, it is even more), and not all of them can be used because of an incorrect `MaxHolds`, which is deemed acceptable according to the `integrity_test`: ``` // pseudo-code - if we try to call all of these: T::Currency::hold(&pallet_nis::HoldReason::NftReceipt.into(), &nft_owner, deposit)?; T::Currency::hold(&pallet_preimage::HoldReason::Preimage.into(), &nft_owner, deposit)?; T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForContinueMigrate.into(), &nft_owner, deposit)?; // With `type MaxHolds = ConstU32<3>` these two will fail T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomTop.into(), &nft_owner, deposit)?; T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomChild.into(), &nft_owner, deposit)?; ``` ## Solutions A macro `#[pallet::*]` expansion is extended of `VariantCount` implementation for the `#[pallet::composite_enum]` enum type. This expansion generates the `VariantCount` implementation for pallets' `HoldReason`, `FreezeReason`, `LockId`, and `SlashReason`. Enum variants must be plain enum values without fields to ensure a deterministic count. The composite runtime enum, `RuntimeHoldReason` and `RuntimeFreezeReason`, now sets `VariantCount::VARIANT_COUNT` as the sum of pallets' enum `VariantCount::VARIANT_COUNT`: ```rust #[frame_support::pallet(dev_mode)] mod module_single_instance { #[pallet::composite_enum] pub enum HoldReason { ModuleSingleInstanceReason1, ModuleSingleInstanceReason2, } ... } #[frame_support::pallet(dev_mode)] mod module_multi_instance { #[pallet::composite_enum] pub enum HoldReason<I: 'static = ()> { ModuleMultiInstanceReason1, ModuleMultiInstanceReason2, ModuleMultiInstanceReason3, } ... } impl self::sp_api_hidden_includes_construct_runtime::hidden_include::traits::VariantCount for RuntimeHoldReason { const VARIANT_COUNT: u32 = 0 + module_single_instance::HoldReason::VARIANT_COUNT + module_multi_instance::HoldReason::<module_multi_instance::Instance1>::VARIANT_COUNT + module_multi_instance::HoldReason::<module_multi_instance::Instance2>::VARIANT_COUNT + module_multi_instance::HoldReason::<module_multi_instance::Instance3>::VARIANT_COUNT; } ``` In addition, `MaxHolds` is removed (as suggested [here](https://github.com/paritytech/polkadot-sdk/pull/2657#discussion_r1443324573)) from `pallet_balances`, and its `Holds` are now bounded to `RuntimeHoldReason::VARIANT_COUNT`. Therefore, there is no need to let the runtime specify `MaxHolds`. ## For reviewers Relevant changes can be found here: - `substrate/frame/support/procedural/src/lib.rs` - `substrate/frame/support/procedural/src/pallet/parse/composite.rs` - `substrate/frame/support/procedural/src/pallet/expand/composite.rs` - `substrate/frame/support/procedural/src/construct_runtime/expand/composite_helper.rs` - `substrate/frame/support/procedural/src/construct_runtime/expand/hold_reason.rs` - `substrate/frame/support/procedural/src/construct_runtime/expand/freeze_reason.rs` - `substrate/frame/support/src/traits/misc.rs` And the rest of the files is just about removed `MaxHolds` from `pallet_balances` ## Next steps Do the same for `MaxFreezes` https://github.com/paritytech/polkadot-sdk/issues/2997. --------- Co-authored-by: command-bot <> Co-authored-by:
Dónal Murray <[email protected]> Co-authored-by:
gupnik <[email protected]>
-
- Jan 30, 2024
-
-
dharjeezy authored
closes https://github.com/polkadot-fellows/help-center/issues/1 --------- Signed-off-by:
-
Robert Hambrock authoredMoves `pallet_mmr` back behind `pallet_session` to address polkadot-fellows/runtimes#160. Opening draft for CI - should be merged or closed depending on outcome of w3f/polkadot-spec#718. --------- Co-authored-by:Adrian Catangiu <[email protected]>
-
- Jan 24, 2024
-
-
Branislav Kontur authored
## Summary This PR consolidates `pallet-state-trie-migration` as a part of https://github.com/paritytech/polkadot-sdk/issues/226 / https://github.com/paritytech/polkadot-sdk/issues/171: `pallet-state-trie-migration`: - [x] replace `Currency` with `fungible` traits - [x] run benchmarks - [x] refactor to `DefaultConfig` `pallet_nicks`: - [x] remove others: - [x] remove `as Fn*` or `asFun*` stuff based on discussion [here](https://github.com/paritytech/polkadot-sdk/issues/226#issuecomment-1822861445) --------- Co-authored-by:Richard Melkonian <[email protected]> Co-authored-by: command-bot <>
-
- Jan 22, 2024
-
-
joe petrowski authored
Clean up all the old syntax. --------- Co-authored-by: command-bot <> Co-authored-by:
Maksym H <[email protected]>
-
- Jan 12, 2024
-
-
Serban Iorga authored
Related to https://github.com/paritytech/polkadot-sdk/issues/2787 Fixes `pallet_mmr::Config` for the kitchensink runtime
-
- Jan 10, 2024
-
-
joe petrowski authored
This PR allows _username authorities_ to issue unique usernames that correspond with an account. It also provides two-way lookup, that is from `AccountId` to a single, "primary" `Username` (alongside `Registration`) and multiple unique `Username`s to an `AccountId`. Key features: - Username Authorities added (and removed) via privileged origin. - Authorities have a `suffix` and an `allocation`. They can grant up to `allocation` usernames. Their `suffix` will be appended to the usernames that they issue. A suffix may be up to 7 characters long. - Users can ask an authority to grant them a username. This will take the form `myusername.suffix`. The entire name (including suffix) must be less than or equal to 32 alphanumeric characters. - Users can approve a username for themselves in one of two ways (that is, authorities cannot grant them arbitrarily): - Pre-sign the entire username (including suffix) with a secret key that corresponds to their `AccountId` (for keyed accounts, obviously); or - Accept the username after it has been granted by an authority (it will be queued until accepted) (for non-keyed accounts like pure proxies or multisigs). - The system does not require any funds or deposits. Users without an identity will be given a default one (presumably all fields set to `None`). If they update this info, they will need to place the normal storage deposit. - If a user does not have any username, their first one will be set as `Primary`, and their `AccountId` will map to that one. If they get subsequent usernames, they can choose which one to be their primary via `set_primary_username`. - There are some state cleanup functions to remove expired usernames that have not been accepted and dangling usernames whose owners have called `clear_identity`. TODO: - [x] Add migration to runtimes - [x] Probably do off-chain migration into People Chain genesis - [x] Address a few TODO questions in code (please review) --------- Co-authored-by:
Gonçalo Pestana <[email protected]> Co-authored-by:
-
- Jan 07, 2024
-
-
dependabot[bot] authored
Bumps the known_good_semver group with 4 updates: [serde](https://github.com/serde-rs/serde), [serde_json](https://github.com/serde-rs/json), [clap](https://github.com/clap-rs/clap) and [syn](https://github.com/dtolnay/syn). Updates `serde` from 1.0.194 to 1.0.195 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/serde/releases">serde's releases</a>.</em></p> <blockquote> <h2>v1.0.195</h2> <ul> <li>Prevent remote definitions of tuple struct or tuple variant from triggering dead_code warning (<a href="https://redirect.github.com/serde-rs/serde/issues/2671">#2671</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/serde/commit/03eec42c3313b36da416be1486e9ecac345784d5"><code>03eec42</code></a> Release 1.0.195</li> <li><a href="https://github.com/serde-rs/serde/commit/196f311ae2fd8ad94fe38a57830419859a4d3dbb"><code>196f311</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2671">#2671</a> from dtolnay/deadremote</li> <li><a href="https://github.com/serde-rs/serde/commit/38d9e0b2091e9b6150486c2c37367819b86bcc39"><code>38d9e0b</code></a> Revert "Add FIXME to fix dead_code warning when using serde(remote)"</li> <li><a href="https://github.com/serde-rs/serde/commit/6502b3131697eff6420786ad71f87f29cfff3a13"><code>6502b31</code></a> Fix new dead_code warning in tuple struct and tuple variant remote defs</li> <li><a href="https://github.com/serde-rs/serde/commit/6f1a8c3115c8d2502178c25d610fbaee2e82c46b"><code>6f1a8c3</code></a> Add FIXME to fix dead_code warning when using serde(remote)</li> <li><a href="https://github.com/serde-rs/serde/commit/d883c94cc9fe72d0512dc7f4def7191a401595c9"><code>d883c94</code></a> Work around dead_code warning in tests</li> <li><a href="https://github.com/serde-rs/serde/commit/961fa59a7469c5b5e323b9723323df412048d60d"><code>961fa59</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2670">#2670</a> from serde-rs/exhaustive</li> <li><a href="https://github.com/serde-rs/serde/commit/8bc71def551df190e6817d3311e5c76f751f53e6"><code>8bc71de</code></a> Fill in omitted patterns for GenericArguments match</li> <li><a href="https://github.com/serde-rs/serde/commit/7c65a9dc0eab2d4d829b258a7b3549351bbe8dcd"><code>7c65a9d</code></a> Pick up changes to non_exhaustive_omitted_patterns lint</li> <li>See full diff in <a href="https://github.com/serde-rs/serde/compare/v1.0.194...v1.0.195">compare view</a></li> </ul> </details> <br /> Updates `serde_json` from 1.0.110 to 1.0.111 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/json/releases">serde_json's releases</a>.</em></p> <blockquote> <h2>v1.0.111</h2> <ul> <li>Improve floating point parsing performance on loongarch64 (<a href="https://redirect.github.com/serde-rs/json/issues/1100">#1100</a>, thanks <a href="https://github.com/heiher"><code>@heiher</code></a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/json/commit/0131ac68212e8094bd14ee618587d731b4f9a68b"><code>0131ac6</code></a> Release 1.0.111</li> <li><a href="https://github.com/serde-rs/json/commit/96ecfadd3f7dd6366a2d07a098e228d15df93cb4"><code>96ecfad</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/json/issues/1100">#1100</a> from heiher/limb-64-la64</li> <li><a href="https://github.com/serde-rs/json/commit/c80dbaf8ff5902ca670e0a48bbe495065b9314f5"><code>c80dbaf</code></a> Set limb width to 64 for loongarch64</li> <li>See full diff in <a href="https://github.com/serde-rs/json/compare/v1.0.110...v1.0.111">compare view</a></li> </ul> </details> <br /> Updates `clap` from 4.4.12 to 4.4.13 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/releases">clap's releases</a>.</em></p> <blockquote> <h2>v4.4.13</h2> <h2>[4.4.13] - 2024-01-04</h2> <h3>Documentation</h3> <ul> <li>Fix link to structopt migration guide</li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's changelog</a>.</em></p> <blockquote> <h2>[4.4.13] - 2024-01-04</h2> <h3>Documentation</h3> <ul> <li>Fix link to structopt migration guide</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/clap-rs/clap/commit/2ab48b295c2463ce8c141a9868095b811ccf3b99"><code>2ab48b2</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/7a06a8cd619db704c6d826bf752eae3b86ce23a8"><code>7a06a8c</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/cca190efedf40f48147a3a4a777a9cc17728abdf"><code>cca190e</code></a> docs: Correct link to StructOpt migration guide</li> <li><a href="https://github.com/clap-rs/clap/commit/5c31f453c1a9f46109db8e0a47ed212748c0556c"><code>5c31f45</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5281">#5281</a> from Manishearth/safety-docs</li> <li><a href="https://github.com/clap-rs/clap/commit/ddae7e6f411c4c87294212152b8d9beea16637e7"><code>ddae7e6</code></a> Correct safety docs</li> <li><a href="https://github.com/clap-rs/clap/commit/48d28aa689bfd0fb44ec025244b30ba261e2515a"><code>48d28aa</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/748ce18cc2ccc3f7c07fa8b7c5b6f90ed9242b72"><code>748ce18</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/adbe6ec4cb6a617070c41927a389d0bea7b30936"><code>adbe6ec</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5278">#5278</a> from henry-hsieh/fix-nosort</li> <li><a href="https://github.com/clap-rs/clap/commit/2b48858ba84c62e9af97bee4734d70530254cd8a"><code>2b48858</code></a> fix: Skip nosort option below bash 4.4</li> <li><a href="https://github.com/clap-rs/clap/commit/777b744102cde324dc75534ef043efc15a9f40be"><code>777b744</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5277">#5277</a> from clap-rs/renovate/actions-setup-python-5.x</li> <li>Additional commits viewable in <a href="https://github.com/clap-rs/clap/compare/v4.4.12...v4.4.13">compare view</a></li> </ul> </details> <br /> Updates `syn` from 2.0.47 to 2.0.48 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/dtolnay/syn/releases">syn's releases</a>.</em></p> <blockquote> <h2>2.0.48</h2> <ul> <li>Improve error message on unexpected token after <code>else</code> (<a href="https://redirect.github.com/dtolnay/syn/issues/1578">#1578</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/dtolnay/syn/commit/5e16fc24e68b16a381cb7ef22455dba9db143083"><code>5e16fc2</code></a> Release 2.0.48</li> <li><a href="https://github.com/dtolnay/syn/commit/dc40084b15ab4a443179fc39cbadac6452408838"><code>dc40084</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/syn/issues/1578">#1578</a> from dtolnay/elseblock</li> <li><a href="https://github.com/dtolnay/syn/commit/82fcefce69d36e78301936c5af91f005d6a24357"><code>82fcefc</code></a> Fix error message on unexpected token after 'else'</li> <li><a href="https://github.com/dtolnay/syn/commit/e8a5c68ad45194e575a923f6b1e08f1817196331"><code>e8a5c68</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/syn/issues/1576">#1576</a> from dtolnay/exhaustive</li> <li><a href="https://github.com/dtolnay/syn/commit/97b1df6d935cb4801f4090782304577c8574d024"><code>97b1df6</code></a> Pick up changes to non_exhaustive_omitted_patterns lint</li> <li>See full diff in <a href="https://github.com/dtolnay/syn/compare/2.0.47...2.0.48">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by:
-
- Jan 06, 2024
-
-
Serban Iorga authored
Related to https://github.com/paritytech/polkadot-sdk/issues/2787 Adding BEEFY support to the kitchensink chain in order to be able to extend the current warp sync zombienet tests with BEEFY enabled
-
- Jan 04, 2024
-
-
dependabot[bot] authored
Bumps the known_good_semver group with 4 updates: [serde](https://github.com/serde-rs/serde), [serde_json](https://github.com/serde-rs/json), [clap](https://github.com/clap-rs/clap) and [serde_yaml](https://github.com/dtolnay/serde-yaml). Updates `serde` from 1.0.193 to 1.0.194 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/serde/releases">serde's releases</a>.</em></p> <blockquote> <h2>v1.0.194</h2> <ul> <li>Update proc-macro2 to fix caching issue when using a rustc-wrapper such as sccache</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/serde/commit/d2d977a6c6dcff237ae956336d18b0c900c61aad"><code>d2d977a</code></a> Release 1.0.194</li> <li><a href="https://github.com/serde-rs/serde/commit/a9a6ee9d7f2e3a3306ad7c7a8f21dcf369c6acb7"><code>a9a6ee9</code></a> Pull in proc-macro2 sccache fix</li> <li><a href="https://github.com/serde-rs/serde/commit/28c5d215c11b66368b725f04cb92e49e4350bcdc"><code>28c5d21</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2669">#2669</a> from dtolnay/optionifletelse</li> <li><a href="https://github.com/serde-rs/serde/commit/3d6a789562579fb7ea783e0d7f35530914d8baca"><code>3d6a789</code></a> Remove option_if_let_else clippy suppression</li> <li><a href="https://github.com/serde-rs/serde/commit/a0e68698e33fa928f1d9f208d68b17df9f8bb568"><code>a0e6869</code></a> Work around doc_link_with_quotes pedantic clippy lint</li> <li>See full diff in <a href="https://github.com/serde-rs/serde/compare/v1.0.193...v1.0.194">compare view</a></li> </ul> </details> <br /> Updates `serde_json` from 1.0.108 to 1.0.110 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/json/releases">serde_json's releases</a>.</em></p> <blockquote> <h2>v1.0.109</h2> <ul> <li>Documentation improvements</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/json/commit/df5cf215b70fb6341b255e7c0a210c06f64c0669"><code>df5cf21</code></a> Release 1.0.110</li> <li><a href="https://github.com/serde-rs/json/commit/c35856a93c37b48b3d6efc4fec8e05554dd3f9d5"><code>c35856a</code></a> Pull in proc-macro2 sccache fix</li> <li><a href="https://github.com/serde-rs/json/commit/f88bf1fccb05aa4de129675de44eb6aaf3fec0a0"><code>f88bf1f</code></a> Release 1.0.109</li> <li><a href="https://github.com/serde-rs/json/commit/bb62c73ecef901e689b0a7a67ed613a32975520c"><code>bb62c73</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/json/issues/1097">#1097</a> from serde-rs/doccfg</li> <li><a href="https://github.com/serde-rs/json/commit/df36d109fd9f9cdd22a874c0177cafec12237f95"><code>df36d10</code></a> Restore doc cfg on re-exports</li> <li><a href="https://github.com/serde-rs/json/commit/c3670913423329c166add9d85ecdfc3e3da21e7a"><code>c367091</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/json/issues/1095">#1095</a> from dtolnay/hashtest</li> <li><a href="https://github.com/serde-rs/json/commit/b328ee7df4dd772922f084600aa7cea39218b694"><code>b328ee7</code></a> Eliminate hash closure in favor of calling hash_one directly</li> <li><a href="https://github.com/serde-rs/json/commit/b9bcbad3c094042f79f1a45189ec0edbb8f9f322"><code>b9bcbad</code></a> Use BuildHasher::hash_one</li> <li><a href="https://github.com/serde-rs/json/commit/7ff6c9e30c2ecc2cdcf089ed86c7ccfe7a41721c"><code>7ff6c9e</code></a> Use random hasher state for number hashing test</li> <li><a href="https://github.com/serde-rs/json/commit/fe031cd1de4dde5b47e0f18934632b41bd18b48d"><code>fe031cd</code></a> Delete trace_macros! functionality from test</li> <li>Additional commits viewable in <a href="https://github.com/serde-rs/json/compare/v1.0.108...v1.0.110">compare view</a></li> </ul> </details> <br /> Updates `clap` from 4.4.11 to 4.4.12 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/releases">clap's releases</a>.</em></p> <blockquote> <h2>v4.4.12</h2> <h2>[4.4.12] - 2023-12-28</h2> <h3>Performance</h3> <ul> <li>Only ask <code>TypedValueParser</code> for possible values if needed</li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's changelog</a>.</em></p> <blockquote> <h2>[4.4.12] - 2023-12-28</h2> <h3>Performance</h3> <ul> <li>Only ask <code>TypedValueParser</code> for possible values if needed</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/clap-rs/clap/commit/6d601e6f312857d78f47741268f1748840484d4a"><code>6d601e6</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/048e7f0fbc4f8108894e4307af768c8d332a0576"><code>048e7f0</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/53f5b820988c1c03f0d2696fc144857ad461edc1"><code>53f5b82</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5267">#5267</a> from vermiculus/sa/avoid-pv-expansion-in-help</li> <li><a href="https://github.com/clap-rs/clap/commit/05cd057978db743a65fb5fde33213af752d064e7"><code>05cd057</code></a> perf: Avoid retrieving possible_values unless used</li> <li><a href="https://github.com/clap-rs/clap/commit/29208083b0598ba7d1b80e79821c0ba3eb2342ce"><code>2920808</code></a> test: Update snapshots</li> <li><a href="https://github.com/clap-rs/clap/commit/28763ebb6d8714f6ca588bf477729040e0e760b0"><code>28763eb</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/ace7bb5b4570b030f7c2d0fa91e0afaaac1b0030"><code>ace7bb5</code></a> docs(complete): Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/76beca4d4d42a817bbb578f23553c64ded2aea97"><code>76beca4</code></a> docs(complete): Polish API reference for dynamic</li> <li><a href="https://github.com/clap-rs/clap/commit/3630e582d3ec59912b8e9369c38687695ddb1f43"><code>3630e58</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5273">#5273</a> from epage/docsrs</li> <li><a href="https://github.com/clap-rs/clap/commit/3724b9e2e4c2a2e69337b6d809949b246d3fef39"><code>3724b9e</code></a> docs: Include more content on docs.rs</li> <li>See full diff in <a href="https://github.com/clap-rs/clap/compare/v4.4.11...v4.4.12">compare view</a></li> </ul> </details> <br /> Updates `serde_yaml` from 0.9.29 to 0.9.30 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/dtolnay/serde-yaml/releases">serde_yaml's releases</a>.</em></p> <blockquote> <h2>0.9.30</h2> <ul> <li>Update proc-macro2 to fix caching issue when using a rustc-wrapper such as sccache</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/dtolnay/serde-yaml/commit/09ee25156f608f95150b27edd120bd5471db3c64"><code>09ee251</code></a> Release 0.9.30</li> <li><a href="https://github.com/dtolnay/serde-yaml/commit/caea939ece85ab54ac41de0672d683905f1e406a"><code>caea939</code></a> Pull in proc-macro2 sccache fix</li> <li><a href="https://github.com/dtolnay/serde-yaml/commit/d255918c141fd72d01f169bb5aa0152234981699"><code>d255918</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/serde-yaml/issues/403">#403</a> from dtolnay/optionifletelse</li> <li><a href="https://github.com/dtolnay/serde-yaml/commit/8cfeedd766f83dab24d03b9fb11b72886a247425"><code>8cfeedd</code></a> Remove option_if_let_else clippy suppression</li> <li>See full diff in <a href="https://github.com/dtolnay/serde-yaml/compare/0.9.29...0.9.30">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by:
-
- Dec 21, 2023
-
-
eskimor authored
Also fixes: https://github.com/paritytech/polkadot-sdk/issues/1417 - [x] CoreIndex -> AssignmentProvider mapping will be able to change any time. - [x] Implement - [x] Provide Migrations - [x] Add and fix tests - [x] Implement bulk assigner logic - [x] bulk assigner tests - [x] Port over current assigner to use bulk designer (+ share on-demand with bulk): top-level assigner has core ranges: legacy, bulk - [x] Adjust migrations to reflect new assigner structure - [x] Move migration code to Assignment code directly and make it recursive (make it possible to skip releases) -> follow up ticket. - [x] Test migrations - [x] Add migration PR to runtimes repo -> follow up ticket. - [x] Wire up with actual UMP messages - [x] Write PR docs --------- Co-authored-by:
eskimor <[email protected]> Co-authored-by:
Bradley Olson <[email protected]> Co-authored-by:
BradleyOlson64 <[email protected]> Co-authored-by:
antonva <[email protected]> Co-authored-by:
Marcin S. <[email protected]> Co-authored-by:
Bastian Köcher <[email protected]> Co-authored-by: command-bot <>
-
- Dec 20, 2023
-
-
Muharem Ismailov authored
closes https://github.com/paritytech/polkadot-sdk/issues/1842 Decoupling Pallet from the Concept of Native Currency Currently, the pallet is intrinsically linked with the concept of native currency, requiring users to provide implementations of the `fungible::*` and `fungibles::*` traits to interact with native and non native assets. This incapsulates some non-related to the pallet complexity and makes it less adaptable in contexts where the native currency concept is absent. With this PR, the dependence on `fungible::*` for liquidity-supplying assets has been removed. Instead, the native and non-native currencies' handling is now overseen by a single type that implements the `fungibles::*` traits. To simplify this integration, types have been introduced to facilitate the creation of a union between `fungible::*` and `fungibles::*` implementations, producing a unified `fungibles::*` type. One of the reasons driving these changes is the ambition to create a more user-friendly API for the `SwapCredit` implementation. Given that it interacts with two distinct credit types from `fungible` and `fungibles`, a unified type was introduced. Clients now manage potential conversion failures for those credit types. In certain contexts, it's vital to guarantee that operations are fail-safe, like in this impl - [PR](https://github.com/paritytech/polkadot-sdk/pull/1845), place in [code](https://github.com/paritytech/polkadot-sdk/blob/20b85a5f /cumulus/primitives/utility/src/lib.rs#L429). Additional Updates: - abstracted the pool ID and its account derivation logic via trait bounds, along with common implementation offerings; - removed `inc_providers` on a pool creation for the pool account; - benchmarks: -- swap complexity is N, not const; -- removed `From<u128> + Into<u128>` bound from `T::Balance`; -- removed swap/liquidity/.. amount constants, resolve them dynamically based on pallet configuration; -- migrated to v2 API; - `OnUnbalanced` handler for the pool creation fee, replacing direct transfers to a specified account ID; - renamed `MultiAssetId` to `AssetKind` aligning with naming across frame crates; related PRs: - (depends) https://github.com/paritytech/polkadot-sdk/pull/1677 - (caused) https://github.com/paritytech/polkadot-sdk/pull/2033 - (caused) https://github.com/paritytech/polkadot-sdk/pull/1876 --------- Co-authored-by:
joe petrowski <[email protected]> Co-authored-by:
-
- Dec 19, 2023
-
-
Muharem Ismailov authored
Introduces a swap implementation that allows the exchange of a credit (aka Negative Imbalance) of one asset for a credit of another asset. This is particularly useful when a credit swap is required but may not have sufficient value to meet the ED constraint, hence cannot be deposited to temp account before. An example use case is when XCM fees are paid using an asset held in the XCM executor registry and has to be swapped for native currency. Additional Updates: - encapsulates the existing `Swap` trait impl within a transactional context, since partial storage mutation is possible when an error occurs; - supplied `Currency` and `Assets` impls must be implemented over the same `Balance` type, the `AssetBalance` generic type is dropped. This helps to avoid numerous type conversion and overflow cases. If those types are different it should be handled outside of the pallet; - `Box` asset kind on a pallet level, unbox on a runtime level - here [why](https://substrate.stackexchange.com/questions/10039/boxed-argument-of-a-dispatchable/10103#10103); - `path` uses `Vec` now, instead of `BoundedVec` since it is never used in PoV; - removes the `Transfer` event due to it's redundancy with the events emitted by `fungible/s` implementations; - modifies the `SwapExecuted` event type; related issue: - https://github.com/paritytech/polkadot-sdk/issues/105 related PRs: - (required for) https://github.com/paritytech/polkadot-sdk/pull/1845 - (caused) https://github.com/paritytech/polkadot-sdk/pull/1717 // DONE make the pallet work only with `fungibles` trait and make it free from the concept of a `native` asset - https://github.com/paritytech/polkadot-sdk/issues/1842 --------- Co-authored-by: -
joe petrowski authored
New runtimes for the Coretime Chain (a.k.a. "Broker Chain") described in RFC-1. Replaces https://github.com/paritytech/cumulus/pull/2889 - [x] Add Agile Coretime pallet https://github.com/paritytech/substrate/pull/14568 - [x] Generate chain specs for local and testnets - [x] Deploy parachain on Rococo - Done: [rococo-coretime-rpc.polkadot.io](https://polkadot.js.org/apps/?rpc=wss%3A%2F%2Frococo-coretime-rpc.polkadot.io#/explorer) DevOps issue for Aura keygen: https://github.com/paritytech/devops/issues/2725 Edit (Dónal): This PR is mainly for Rococo, the Westend runtime is a shell with no `Broker` pallet. The Rococo runtime has the broker calls filtered for initial deployment. --------- Co-authored-by:
0xmovses <[email protected]> Co-authored-by:
Branislav Kontur <[email protected]>
-
- Dec 15, 2023
-
-
Ankan authored
closes https://github.com/paritytech-secops/srlabs_findings/issues/78. Removes `BetterUnsignedThreshold` from pallet EPM. This will essentially mean any solution submitted by the validator that is strictly better than the current queued solution would be accepted. The reason for having these thresholds is to limit number of solutions submitted on-chain. However for unsigned submissions, the number of solutions that could be submitted on average is limited even without thresholding (calculation shown in the corresponding issue).
-
gupnik authored
https://github.com/paritytech/polkadot-sdk/pull/1343/ introduced Tasks API. This one moves `do_task` call in frame_system under the experimental flag, till the previous one is audited. --------- Co-authored-by: command-bot <>
-
- Dec 13, 2023
-
-
Squirrel authored
We currently use a bit of a hack in `.cargo/config` to make sure that clippy isn't too annoying by specifying the list of lints. There is now a stable way to define lints for a workspace. The only down side is that every crate seems to have to opt into this so there's a *few* files modified in this PR. Dependencies: - [x] PR that upgrades CI to use rust 1.74 is merged. --------- Co-authored-by:
-
- Dec 12, 2023
-
-
Ross Bulat authored
Partially Addresses #2500 Adds a `deprecate_controller_batch` call to the staking pallet that is callable by `Root` and `StakingAdmin`. To be used for controller account deprecation and removed thereafter. Adds `MaxControllersDeprecationBatch` pallet constant that defines max possible deprecations per call. - [x] Add `deprecate_controller_batch` call, and `MaxControllersInDeprecationBatch` constant. - [x] Add tests, benchmark, weights. Tests that weight is only consumed if unique pair. - [x] Adds `StakingAdmin` origin to staking's `AdminOrigin` type in westend runtime. - [x] Determined that worst case 5,900 deprecations does fit into `maxBlock` `proofSize` and `refTime` in both normal and operational thresholds, meaning we can deprecate all controllers for each network in one call. ## Block Weights By querying `consts.system.blockWeights` we can see that the `deprecate_controller_batch` weights fit within the `normal` threshold on Polkadot. #### `controller_deprecation_batch` where i = 5900: #### Ref time: 69,933,325,300 #### Proof size: 21,040,390 ### Polkadot ``` // consts.query.blockWeights maxBlock: { refTime: 2,000,000,000,000 proofSize: 18,446,744,073,709,551,615 } normal: { maxExtrinsic: { refTime: 1,479,873,955,000 proofSize: 13,650,590,614,545,068,195 } maxTotal: { refTime: 1,500,000,000,000 proofSize: 13,835,058,055,282,163,711 } } ``` ### Kusama ``` // consts.query.blockWeights maxBlock: { refTime: 2,000,000,000,000 proofSize: 18,446,744,073,709,551,615 } normal: { maxExtrinsic: { refTime: 1,479,875,294,000 proofSize: 13,650,590,614,545,068,195 } maxTotal: { refTime: 1,500,000,000,000 proofSize: 13,835,058,055,282,163,711 } } ``` --------- Co-authored-by: command-bot <> Co-authored-by:
-
- Dec 11, 2023
-
-
Gabriel Facco de Arruda authored
This PR makes the block number provider configurable through the Config trait in pallet-vesting, this gives parachains the option to use the relay chain block number provider from ParachainSystem. --------- Co-authored-by:
-
- Dec 08, 2023
-
-
Sam Johnson authored
`polkadot-sdk` version of original tasks PR located here: https://github.com/paritytech/substrate/pull/14329 Fixes #206 ## Status - [x] Generic `Task` trait - [x] `RuntimeTask` aggregated enum, compatible with `construct_runtime!` - [x] Casting between `Task` and `RuntimeTask` without needing `dyn` or `Box` - [x] Tasks Example pallet - [x] Runtime tests for Tasks example pallet - [x] Parsing for task-related macros - [x] Retrofit parsing to make macros optional - [x] Expansion for task-related macros - [x] Adds support for args in tasks - [x] Retrofit tasks example pallet to use macros instead of manual syntax - [x] Weights - [x] Cleanup - [x] UI tests - [x] Docs ## Target Syntax Adapted from https://github.com/paritytech/polkadot-sdk/issues/206#issue-1865172283 ```rust // NOTE: this enum is optional and is auto-generated by the other macros if not present #[pallet::task] pub enum Task<T: Config> { AddNumberIntoTotal { i: u32, } } /// Some running total. #[pallet::storage] pub(super) type Total<T: Config<I>, I: 'static = ()> = StorageValue<_, (u32, u32), ValueQuery>; /// Numbers to be added into the total. #[pallet::storage] pub(super) type Numbers<T: Config<I>, I: 'static = ()> = StorageMap<_, Twox64Concat, u32, u32, OptionQuery>; #[pallet::tasks_experimental] impl<T: Config<I>, I: 'static> Pallet<T, I> { /// Add a pair of numbers into the totals and remove them. #[pallet::task_list(Numbers::<T, I>::iter_keys())] #[pallet::task_condition(|i| Numbers::<T, I>::contains_key(i))] #[pallet::task_index(0)] pub fn add_number_into_total(i: u32) -> DispatchResult { let v = Numbers::<T, I>::take(i).ok_or(Error::<T, I>::NotFound)?; Total::<T, I>::mutate(|(total_keys, total_values)| { *total_keys += i; *total_values += v; }); Ok(()) } } ``` --------- Co-authored-by:kianenigma <[email protected]> Co-authored-by: Nikhil Gupta <> Co-authored-by:
-
- Dec 05, 2023
-
-
gupnik authored
-
- Dec 01, 2023
-
-
Liam Aharon authored
Using taplo, fixes all our broken and inconsistent toml formatting and adds CI to keep them tidy. If people want we can customise the format rules as described here https://taplo.tamasfe.dev/configuration/formatter-options.html @ggwpez , I suggest zepter is used only for checking features are propagated, and leave formatting for taplo to avoid duplicate work and conflicts. TODO - [x] Use `exclude = [...]` syntax in taplo file to ignore zombienet tests instead of deleting the dir --------- Signed-off-by:
-
- Nov 29, 2023
-
-
PG Herveou authored
see #2189 This PR does the following: - Bring the user api functions into a new pallet-contracts-uapi (They are currently defined in ink! [here])(https://github.com/paritytech/ink/blob/master/crates/env/src/engine/on_chain/ext.rs) - Add older api versions and unstable to the user api trait. - Remove pallet-contracts-primitives and bring the types it defined in uapi / pallet-contracts - Add the infrastructure to build fixtures from Rust files and test it works by replacing `dummy.wat` and `call.wat` - Move all the doc from wasm/runtime.rs to pallet-contracts-uapi. This will be done in a follow up: - convert the rest of the test from .wat to rust - bring risc-v uapi up to date with wasm - finalize the uapi host fns, making sure everything is codegen from the source host fns in pallet-contracts --------- Co-authored-by:Alexander Theißen <[email protected]>
-
- Nov 17, 2023
-
-
Bruno Galvao authored
The versioned migrations are already there in pallet nomination-pools: https://github.com/paritytech/polkadot-sdk/blob/f6ee4781/substrate/frame/nomination-pools/src/migration.rs#L27-L48 Just updating the kitchensink runtime to point to them. This is also nice because it points the dev to an example of how to use `VersionedMigration`.
-
- Nov 14, 2023
-
-
PG Herveou authored
This PR introduces: - XCM host functions `xcm_send`, `xcm_execute` - An Xcm trait into the config. that proxy these functions to to `pallet_xcm`, or disable their usage by using `()`. - A mock_network and xcm_test files to test the newly added xcm-related functions. --------- Co-authored-by:
Keith Yeung <[email protected]> Co-authored-by:
Sasha Gryaznov <[email protected]> Co-authored-by: command-bot <> Co-authored-by:
-
- Nov 13, 2023
-
-
gupnik authored
Fixes https://github.com/paritytech/polkadot-sdk/issues/1725 This PR adds the following changes: 1. An attribute `pallet::feeless_if` that can be optionally attached to a call like so: ```rust #[pallet::feeless_if(|_origin: &OriginFor<T>, something: &u32| -> bool { *something == 0 })] pub fn do_something(origin: OriginFor<T>, something: u32) -> DispatchResult { .... } ``` The closure passed accepts references to arguments as specified in the call fn. It returns a boolean that denotes the conditions required for this call to be "feeless". 2. A signed extension `SkipCheckIfFeeless<T: SignedExtension>` that wraps a transaction payment processor such as `pallet_transaction_payment::ChargeTransactionPayment`. It checks for all calls annotated with `pallet::feeless_if` to see if the conditions are met. If so, the wrapped signed extension is not called, essentially making the call feeless. In order to use this, you can simply replace your existing signed extension that manages transaction payment like so: ```diff - pallet_transaction_payment::ChargeTransactionPayment<Runtime>, + pallet_skip_feeless_payment::SkipCheckIfFeeless< + Runtime, + pallet_transaction_payment::ChargeTransactionPayment<Runtime>, + >, ``` ### Todo - [x] Tests - [x] Docs - [x] Prdoc --------- Co-authored-by: Nikhil Gupta <> Co-authored-by:
-
- Nov 06, 2023
-
-
Michal Kucharczyk authoredThis PR updates the version of `serde_json` to `1.0.108` throughout the codebase.
-
- Nov 05, 2023
-
-
Michal Kucharczyk authored
This PR prepares chains specs for _native-runtime-free_ world. This PR has following changes: - `substrate`: - adds support for: - JSON based `GenesisConfig` to `ChainSpec` allowing interaction with runtime `GenesisBuilder` API. - interacting with arbitrary runtime wasm blob to[ `chain-spec-builder`](https://github.com/paritytech/substrate/blob/3ef576eaeb3f42610e85daecc464961cf1295570/bin/utils/chain-spec-builder/src/lib.rs#L46) command line util, - removes [`code`](https://github.com/paritytech/substrate/blob/3ef576eaeb3f42610e85daecc464961cf1295570/frame/system/src/lib.rs#L660) from `system_pallet` - adds `code` to the `ChainSpec` - deprecates [`ChainSpec::from_genesis`](https://github.com/paritytech/substrate/blob/3ef576eaeb3f42610e85daecc464961cf1295570/client/chain-spec/src/chain_spec.rs#L263), but also changes the signature of this method extending it with `code` argument. [`ChainSpec::builder()`](https://github.com/paritytech/substrate/blob/20bee680ed098be7239cf7a6b804cd4de267983e/client/chain-spec/src/chain_spec.rs#L507) should be used instead. - `polkadot`: - all references to `RuntimeGenesisConfig` in `node/service` are removed, - all `(kusama|polkadot|versi|rococo|wococo)_(staging|dev)_genesis_config` functions now return the JSON patch for default runtime `GenesisConfig`, - `ChainSpecBuilder` is used, `ChainSpec::from_genesis` is removed, - `cumulus`: - `ChainSpecBuilder` is used, `ChainSpec::from_genesis` is removed, - _JSON_ patch configuration used instead of `RuntimeGenesisConfig struct` in all chain specs. --------- Co-authored-by: command-bot <> Co-authored-by:
Javier Viola <[email protected]> Co-authored-by:
Davide Galassi <[email protected]> Co-authored-by:
Kevin Krone <[email protected]> Co-authored-by:
-
- Nov 03, 2023
-
-
georgepisaltu authored
This PR is a follow up to #1661 - [x] rename the `simple` module to `legacy` - [x] fix benchmarks to disregard the number of additional fields - [x] change the storage deposits to charge per encoded byte of the identity information instance, removing the need for `fn additional(&self) -> usize` in `IdentityInformationProvider` - [x] ~add an extrinsic to rejig deposits to account for the change above~ - [ ] ~ensure through proper configuration that the new byte-based deposit is always lower than whatever is reserved now~ - [x] remove `IdentityFields` from the `set_fields` extrinsic signature, as per [this discussion](https://github.com/paritytech/polkadot-sdk/pull/1661#discussion_r1371703403) > ensure through proper configuration that the new byte-based deposit is always lower than whatever is reserved now Not sure this is needed anymore. If the new deposits are higher than what is currently on chain and users don't have enough funds to reserve what is needed, the extrinisc fails and they're basically grandfathered and frozen until they add more funds and/or make a change to their identity. This behavior seems fine to me. Original idea [here](https://github.com/paritytech/polkadot-sdk/pull/1661#issuecomment-1779606319). > add an extrinsic to rejig deposits to account for the change above This was initially implemented but now removed from this PR in favor of the implementation detailed [here](https://github.com/paritytech/polkadot-sdk/pull/2088). --------- Signed-off-by:
georgepisaltu <[email protected]> Co-authored-by:
joepetrowski <[email protected]>
-
- Nov 01, 2023
-
-
Ankan authored
helps https://github.com/paritytech/polkadot-sdk/issues/439. closes https://github.com/paritytech/polkadot-sdk/issues/473. PR link in the older substrate repository: https://github.com/paritytech/substrate/pull/13498. # Context Rewards payout is processed today in a single block and limited to `MaxNominatorRewardedPerValidator`. This number is currently 512 on both Kusama and Polkadot. This PR tries to scale the nominators payout to an unlimited count in a multi-block fashion. Exposures are stored in pages, with each page capped to a certain number (`MaxExposurePageSize`). Starting out, this number would be the same as `MaxNominatorRewardedPerValidator`, but eventually, this number can be lowered through new runtime upgrades to limit the rewardeable nominators per dispatched call instruction. The changes in the PR are backward compatible. ## How payouts would work like after this change Staking exposes two calls, 1) the existing `payout_stakers` and 2) `payout_stakers_by_page`. ### payout_stakers This remains backward compatible with no signature change. If for a given era a validator has multiple pages, they can call `payout_stakers` multiple times. The pages are executed in an ascending sequence and the runtime takes care of preventing double claims. ### payout_stakers_by_page Very similar to `payout_stakers` but also accepts an extra param `page_index`. An account can choose to payout rewards only for an explicitly passed `page_index`. **Lets look at an example scenario** Given an active validator on Kusama had 1100 nominators, `MaxExposurePageSize` set to 512 for Era e. In order to pay out rewards to all nominators, the caller would need to call `payout_stakers` 3 times. - `payout_stakers(origin, stash, e)` => will pay the first 512 nominators. - `payout_stakers(origin, stash, e)` => will pay the second set of 512 nominators. - `payout_stakers(origin, stash, e)` => will pay the last set of 76 nominators. ... - `payout_stakers(origin, stash, e)` => calling it the 4th time would return an error `InvalidPage`. The above calls can also be replaced by `payout_stakers_by_page` and passing a `page_index` explicitly. ## Commission note Validator commission is paid out in chunks across all the pages where each commission chunk is proportional to the total stake of the current page. This implies higher the total stake of a page, higher will be the commission. If all the pages of a validator's single era are paid out, the sum of commission paid to the validator across all pages should be equal to what the commission would have been if we had a non-paged exposure. ### Migration Note Strictly speaking, we did not need to bump our storage version since there is no migration of storage in this PR. But it is still useful to mark a storage upgrade for the following reasons: - New storage items are introduced in this PR while some older storage items are deprecated. - For the next `HistoryDepth` eras, the exposure would be incrementally migrated to its corresponding paged storage item. - Runtimes using staking pallet would strictly need to wait at least `HistoryDepth` eras with current upgraded version (14) for the migration to complete. At some era `E` such that `E > era_at_which_V14_gets_into_effect + HistoryDepth`, we will upgrade to version X which will remove the deprecated storage items. In other words, it is a strict requirement that E<sub>x</sub> - E<sub>14</sub> > `HistoryDepth`, where E<sub>x</sub> = Era at which deprecated storages are removed from runtime, E<sub>14</sub> = Era at which runtime is upgraded to version 14. - For Polkadot and Kusama, there is a [tracker ticket](https://github.com/paritytech/polkadot-sdk/issues/433) to clean up the deprecated storage items. ### Storage Changes #### Added - ErasStakersOverview - ClaimedRewards - ErasStakersPaged #### Deprecated The following can be cleaned up after 84 eras which is tracked [here](https://github.com/paritytech/polkadot-sdk/issues/433). - ErasStakers. - ErasStakersClipped. - StakingLedger.claimed_rewards, renamed to StakingLedger.legacy_claimed_rewards. ### Config Changes - Renamed MaxNominatorRewardedPerValidator to MaxExposurePageSize. ### TODO - [x] Tracker ticket for cleaning up the old code after 84 eras. - [x] Add companion. - [x] Redo benchmarks before merge. - [x] Add Changelog for pallet_staking. - [x] Pallet should be configurable to enable/disable paged rewards. - [x] Commission payouts are distributed across pages. - [x] Review documentation thoroughly. - [x] Rename `MaxNominatorRewardedPerValidator` -> `MaxExposurePageSize`. - [x] NMap for `ErasStakersPaged`. - [x] Deprecate ErasStakers. - [x] Integrity tests. ### Followup issues [Runtime api for deprecated ErasStakers storage item](https://github.com/paritytech/polkadot-sdk/issues/426) --------- Co-authored-by:
Ross Bulat <[email protected]> Co-authored-by: command-bot <>
-
- Oct 31, 2023
-
-
Adel Arja authored
# Description The `trigger_defensive` call has been added to the `root-testing` pallet. The idea is to have this pallet running on `Rococo/Westend` and use it to verify if the runtime monitoring works end-to-end. To accomplish this, `trigger_defensive` dispatches an event when it is called. Closes #1953 # Checklist - [x] My PR includes a detailed description as outlined in the "Description" section above - [ ] My PR follows the [labeling requirements](CONTRIBUTING.md#Process) of this project (at minimum one label for `T` required) - [ ] I have made corresponding changes to the documentation (if applicable) - [ ] I have added tests that prove my fix is effective or that my feature works (if applicable) You can remove the "Checklist" section once all have been checked. Thank you for your contribution! ✄ ----------------------------------------------------------------------------- --------- Signed-off-by:
-
![dependabot[bot]'s avatar](https://secure.gravatar.com/avatar/bd5a8d6c673b738d52b0ac42a110045f3f964b3ebfc1d60ea805af743b1dc0e6?s=80&d=identicon "dependabot[bot]")
