Skip to content
  1. Apr 22, 2024
  3. Apr 08, 2024
    • Aaro Altonen's avatar
      Integrate litep2p into Polkadot SDK (#2944) · 80616f6d
      Aaro Altonen authored 
      [litep2p](https://github.com/altonen/litep2p) is a libp2p-compatible P2P
networking library. It supports all of the features of `rust-libp2p`
that are currently being utilized by Polkadot SDK.

Compared to `rust-libp2p`, `litep2p` has a quite different architecture
which is why the new `litep2p` network backend is only able to use a
little of the existing code in `sc-network`. The design has been mainly
influenced by how we'd wish to structure our networking-related code in
Polkadot SDK: independent higher-levels protocols directly communicating
with the network over links that support bidirectional backpressure. A
good example would be `NotificationHandle`/`RequestResponseHandle`
abstractions which allow, e.g., `SyncingEngine` to directly communicate
with peers to announce/request blocks.

I've tried running `polkadot --network-backend litep2p` with a few
different peer configurations and there is a noticeable reduction in
networking CPU usage. For high load (`--out-peers 200`), networking CPU
usage goes down from ~110% to ~30% (80 pp) and for normal load
(`--out-peers 40`), the usage goes down from ~55% to ~18% (37 pp).

These should not be taken as final numbers because:

a) there are still some low-hanging optimization fruits, such as
enabling [receive window
auto-tuning](https://github.com/libp2p/rust-yamux/pull/176

), integrating
`Peerset` more closely with `litep2p` or improving memory usage of the
WebSocket transport
b) fixing bugs/instabilities that incorrectly cause `litep2p` to do less
work will increase the networking CPU usage
c) verification in a more diverse set of tests/conditions is needed

Nevertheless, these numbers should give an early estimate for CPU usage
of the new networking backend.

This PR consists of three separate changes:
* introduce a generic `PeerId` (wrapper around `Multihash`) so that we
don't have use `NetworkService::PeerId` in every part of the code that
uses a `PeerId`
* introduce `NetworkBackend` trait, implement it for the libp2p network
stack and make Polkadot SDK generic over `NetworkBackend`
  * implement `NetworkBackend` for litep2p

The new library should be considered experimental which is why
`rust-libp2p` will remain as the default option for the time being. This
PR currently depends on the master branch of `litep2p` but I'll cut a
new release for the library once all review comments have been
addresses.

---------

Signed-off-by: default avatarAlexandru Vasile <[email protected]>
Co-authored-by: default avatarDmitry Markin <[email protected]>
Co-authored-by: default avatarAlexandru Vasile <[email protected]>
Co-authored-by: default avatarAlexandru Vasile <[email protected]>
      80616f6d
  5. Apr 04, 2024
  7. Apr 02, 2024
  9. Mar 26, 2024
    • Dcompoze's avatar
      Fix spelling mistakes across the whole repository (#3808) · 002d9260
      Dcompoze authored 
      **Update:** Pushed additional changes based on the review comments.

**This pull request fixes various spelling mistakes in this
repository.**

Most of the changes are contained in the first **3** commits:

- `Fix spelling mistakes in comments and docs`

- `Fix spelling mistakes in test names`

- `Fix spelling mistakes in error messages, panic messages, logs and
tracing`

Other source code spelling mistakes are separated into individual
commits for easier reviewing:

- `Fix the spelling of 'authority'`

- `Fix the spelling of 'REASONABLE_HEADERS_IN_JUSTIFICATION_ANCESTRY'`

- `Fix the spelling of 'prev_enqueud_messages'`

- `Fix the spelling of 'endpoint'`

- `Fix the spelling of 'children'`

- `Fix the spelling of 'PenpalSiblingSovereignAccount'`

- `Fix the spelling of 'PenpalSudoAccount'`

- `Fix the spelling of 'insufficient'`

- `Fix the spelling of 'PalletXcmExtrinsicsBenchmark'`

- `Fix the spelling of 'subtracted'`

- `Fix the spelling of 'CandidatePendingAvailability'`

- `Fix the spelling of 'exclusive'`

- `Fix the spelling of 'until'`

- `Fix the spelling of 'discriminator'`

- `Fix the spelling of 'nonexistent'`

- `Fix the spelling of 'subsystem'`

- `Fix the spelling of 'indices'`

- `Fix the spelling of 'committed'`

- `Fix the spelling of 'topology'`

- `Fix the spelling of 'response'`

- `Fix the spelling of 'beneficiary'`

- `Fix the spelling of 'formatted'`

- `Fix the spelling of 'UNKNOWN_PROOF_REQUEST'`

- `Fix the spelling of 'succeeded'`

- `Fix the spelling of 'reopened'`

- `Fix the spelling of 'proposer'`

- `Fix the spelling of 'InstantiationNonce'`

- `Fix the spelling of 'depositor'`

- `Fix the spelling of 'expiration'`

- `Fix the spelling of 'phantom'`

- `Fix the spelling of 'AggregatedKeyValue'`

- `Fix the spelling of 'randomness'`

- `Fix the spelling of 'defendant'`

- `Fix the spelling of 'AquaticMammal'`

- `Fix the spelling of 'transactions'`

- `Fix the spelling of 'PassingTracingSubscriber'`

- `Fix the spelling of 'TxSignaturePayload'`

- `Fix the spelling of 'versioning'`

- `Fix the spelling of 'descendant'`

- `Fix the spelling of 'overridden'`

- `Fix the spelling of 'network'`

Let me know if this structure is adequate.

**Note:** The usage of the words `Merkle`, `Merkelize`, `Merklization`,
`Merkelization`, `Merkleization`, is somewhat inconsistent but I left it
as it is.

~~**Note:** In some places the term `Receival` is used to refer to
message reception, IMO `Reception` is the correct word here, but I left
it as it is.~~

~~**Note:** In some places the term `Overlayed` is used instead of the
more acceptable version `Overlaid` but I also left it as it is.~~

~~**Note:** In some places the term `Applyable` is used instead of the
correct version `Applicable` but I also left it as it is.~~

**Note:** Some usage of British vs American english e.g. `judgement` vs
`judgment`, `initialise` vs `initialize`, `optimise` vs `optimize` etc.
are both present in different places, but I suppose that's
understandable given the number of contributors.

~~**Note:** There is a spelling mistake in `.github/CODEOWNERS` but it
triggers errors in CI when I make changes to it, so I left it as it
is.~~
      002d9260
  11. Mar 17, 2024
  13. Mar 15, 2024
  15. Mar 13, 2024
  17. Mar 05, 2024
    • Kian Paimani's avatar
      Repot all templates into a single directory (#3460) · 4c810609
      Kian Paimani authored 
      The first step towards
https://github.com/paritytech/polkadot-sdk/issues/3155

Brings all templates under the following structure

```
templates
|   parachain
|   |   polkadot-launch
|   |   runtime              --> parachain-template-runtime
|   |   pallets              --> pallet-parachain-template
|   |   node                 --> parachain-template-node
|   minimal
|   |   runtime              --> minimal-template-runtime
|   |   pallets              --> pallet-minimal-template
|   |   node                 --> minimal-template-node
|   solochain
|   |   runtime              --> solochain-template-runtime
|   |   pallets              --> pallet-template (the naming is not consistent here)
|   |   node                 --> solochain-template-node
```

The only note-worthy changes in this PR are: 

- More `Cargo.toml` fields are forwarded to use the one from the
workspace.
- parachain template now has weights and benchmarks
- adds a shell pallet to the minimal template
- remove a few unused deps 


A list of possible follow-ups: 

- [ ] Unify READMEs, create a parent README for all
- [ ] remove references to `docs.substrate.io` in templates
- [ ] make all templates use `#[derive_impl]`
- [ ] update and unify all licenses
- [ ] Remove polkadot launch, use
https://github.com/paritytech/polkadot-sdk/blob/35349df993ea2e7c4769914ef5d199e787b23d4c/cumulus/zombienet/examples/small_network.toml
instead.
      4c810609