Closes https://github.com/paritytech/polkadot-sdk/issues/1966,
https://github.com/paritytech/polkadot-sdk/issues/1963 and
https://github.com/paritytech/polkadot-sdk/issues/1962.

Disabling strategy specification
[here](https://github.com/paritytech/polkadot-sdk/pull/2955). (Updated
13/02/2024)

Implements:
* validator disabling for a whole era instead of just a session
* no more than 1/3 of the validators in the active set are disabled
Removes:
* `DisableStrategy` enum - now each validator committing an offence is
disabled.
* New era is not forced if too many validators are disabled.

Before this PR not all offenders were disabled. A decision was made
based on [`enum
DisableStrategy`](https://github.com/paritytech/polkadot-sdk/blob/bbb6631641f9adba30c0ee6f4d11023a424dd362/substrate/primitives/staking/src/offence.rs#L54).
Some offenders were disabled for a whole era, some just for a session,
some were not disabled at all.

This PR changes the disabling behaviour. Now a validator committing an
offense is disabled immediately till the end of the current era.

Some implementation notes:
* `OffendingValidators` in pallet session keeps all offenders (this is
not changed). However its type is changed from `Vec<(u32, bool)>` to
`Vec<u32>`. The reason is simple - each offender is getting disabled so
the bool doesn't make sense anymore.
* When a validator is disabled it is first added to
`OffendingValidators` and then to `DisabledValidators`. This is done in
[`add_offending_validator`](https://github.com/paritytech/polkadot-sdk/blob/bbb6631641f9adba30c0ee6f4d11023a424dd362/substrate/frame/staking/src/slashing.rs#L325)
from staking pallet.
* In
[`rotate_session`](https://github.com/paritytech/polkadot-sdk/blob/bdbe98297032e21a553bf191c530690b1d591405/substrate/frame/session/src/lib.rs#L623)
the `end_session` also calls
[`end_era`](https://github.com/paritytech/polkadot-sdk/blob/bbb6631641f9adba30c0ee6f4d11023a424dd362/substrate/frame/staking/src/pallet/impls.rs#L490)
when an era ends. In this case `OffendingValidators` are cleared
**(1)**.
* Then in
[`rotate_session`](https://github.com/paritytech/polkadot-sdk/blob/bdbe98297032e21a553bf191c530690b1d591405/substrate/frame/session/src/lib.rs#L623)
`DisabledValidators` are cleared **(2)**
* And finally (still in `rotate_session`) a call to
[`start_session`](https://github.com/paritytech/polkadot-sdk/blob/bbb6631641f9adba30c0ee6f4d11023a424dd362/substrate/frame/staking/src/pallet/impls.rs#L430

)
repopulates the disabled validators **(3)**.
* The reason for this complication is that session pallet knows nothing
abut eras. To overcome this on each new session the disabled list is
repopulated (points 2 and 3). Staking pallet knows when a new era starts
so with point 1 it ensures that the offenders list is cleared.

---------

Co-authored-by: ordian <[email protected]>
Co-authored-by: ordian <[email protected]>
Co-authored-by: Maciej <[email protected]>
Co-authored-by: Gonçalo Pestana <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Ankan <[email protected]>

Fixes https://github.com/paritytech/polkadot-sdk/issues/3576



Required by elastic scaling collators.
Deprecates old API: `candidate_pending_availability`.

TODO:
- [x] PRDoc

---------

Signed-off-by: Andrei Sandu <[email protected]>

Implements https://github.com/polkadot-fellows/RFCs/issues/82


Allow any parachain to have bidirectional channel with any system
parachains

Looking for initial feedbacks before continue finish it

TODOs:
- [x] docs
- [x] benchmarks
- [x] tests

---------

Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Adrian Catangiu <[email protected]>

The runtime now can provide a number of predefined presets of
`RuntimeGenesisConfig` struct. This presets are intended to be used in
different deployments, e.g.: `local`, `staging`, etc, and should be
included into the corresponding chain-specs.

Having `GenesisConfig` presets in runtime allows to fully decouple node
from runtime types (the problem is described in #1984).

**Summary of changes:**
- The `GenesisBuilder` API was adjusted to enable this functionality
(and provide better naming - #150):
   ```rust
    fn preset_names() -> Vec<PresetId>;
fn get_preset(id: Option<PresetId>) -> Option<serde_json::Value>;
//`None` means default
    fn build_state(value: serde_json::Value);
    pub struct PresetId(Vec<u8>);
   ```

- **Breaking change**: Old `create_default_config` method was removed,
`build_config` was renamed to `build_state`. As a consequence a node
won't be able to interact with genesis config for older runtimes. The
cleanup was made for sake of API simplicity. Also IMO maintaining
compatibility with old API is not so crucial.
- Reference implementation was provided for `substrate-test-runtime` and
`rococo` runtimes. For rococo new
[`genesis_configs_presets`](https://github.com/paritytech/polkadot-sdk/blob/3b41d66b97c5ff0ec4a1989da5ffd8b9f3f588e3/polkadot/runtime/rococo/src/genesis_config_presets.rs#L530)
module was added and is used in `GenesisBuilder`
[_presets-related_](https://github.com/paritytech/polkadot-sdk/blob/3b41d66b97c5ff0ec4a1989da5ffd8b9f3f588e3/polkadot/runtime/rococo/src/lib.rs#L2462-L2485)
methods.

- The `chain-spec-builder` util was also improved and allows to
([_doc_](https://github.com/paritytech/polkadot-sdk/blob/3b41d66b97c5ff0ec4a1989da5ffd8b9f3f588e3/substrate/bin/utils/chain-spec-builder/src/lib.rs#L19)):
   - list presets provided by given runtime (`list-presets`),
- display preset or default config provided by the runtime
(`display-preset`),
   - build chain-spec using named preset (`create ... named-preset`),


- The `ChainSpecBuilder` is extended with
[`with_genesis_config_preset_name`](https://github.com/paritytech/polkadot-sdk/blob/3b41d66b97c5ff0ec4a1989da5ffd8b9f3f588e3/substrate/client/chain-spec/src/chain_spec.rs#L447)
method which allows to build chain-spec using named preset provided by
the runtime. Sample usage on the node side
[here](https://github.com/paritytech/polkadot-sdk/blob/2caffaae803e08a3d5b46c860e8016da023ff4ce/polkadot/node/service/src/chain_spec.rs#L404

).

Implementation of #1984.
fixes: #150
part of: #25

---------

Co-authored-by: Sebastian Kunert <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

Part of https://github.com/paritytech/polkadot-sdk/issues/226 
Related https://github.com/paritytech/polkadot-sdk/issues/1833

- Deprecate `CurrencyAdapter` and introduce `FungibleAdapter`
- Deprecate `ToStakingPot` and replace usage with `ResolveTo`
- Required creating a new `StakingPotAccountId` struct that implements
`TypedGet` for the staking pot account ID
- Update parachain common utils `DealWithFees`, `ToAuthor` and
`AssetsToBlockAuthor` implementations to use `fungible`
- Update runtime XCM Weight Traders to use `ResolveTo` instead of
`ToStakingPot`
- Update runtime Transaction Payment pallets to use `FungibleAdapter`
instead of `CurrencyAdapter`
- [x] Blocked by https://github.com/paritytech/polkadot-sdk/pull/1296,
needs the `Unbalanced::decrease_balance` fix

Runtime release 1.2 includes bumping of the ParachainHost APIs up to
v10, so let's move all the released APIs out of vstaging folder, this PR
does not include any logic changes only renaming of the modules and some
moving around.

Signed-off-by: Alexandru Gheorghe <[email protected]>

This works only for collators that implement the `collator_fn` allowing
`collation-generation` subsystem to pull collations triggered on new
heads.

Also enables
`request_v2::CollationFetchingResponse::CollationWithParentHeadData` for
test adder/undying collators.

TODO:
- [x] fix tests
- [x] new tests
- [x] PR doc

---------

Signed-off-by: Andrei Sandu <[email protected]>

Step in https://github.com/paritytech/polkadot-sdk/issues/171

This PR removes `as [disambiguation_path]` syntax from `derive_impl`
usage across the polkadot-sdk as introduced in
https://github.com/paritytech/polkadot-sdk/pull/3505

Revert "FRAME: Create `TransactionExtension` as a replacement for `SignedExtension` (#2280)" (#3665)

This PR reverts #2280 which introduced `TransactionExtension` to replace
`SignedExtension`.

As a result of the discussion
[here](https://github.com/paritytech/polkadot-sdk/pull/3623#issuecomment-1986789700

),
the changes will be reverted for now with plans to reintroduce the
concept in the future.

---------

Signed-off-by: georgepisaltu <[email protected]>

Closes #2160

First part of [Extrinsic
Horizon](https://github.com/paritytech/polkadot-sdk/issues/2415

)

Introduces a new trait `TransactionExtension` to replace
`SignedExtension`. Introduce the idea of transactions which obey the
runtime's extensions and have according Extension data (né Extra data)
yet do not have hard-coded signatures.

Deprecate the terminology of "Unsigned" when used for
transactions/extrinsics owing to there now being "proper" unsigned
transactions which obey the extension framework and "old-style" unsigned
which do not. Instead we have __*General*__ for the former and
__*Bare*__ for the latter. (Ultimately, the latter will be phased out as
a type of transaction, and Bare will only be used for Inherents.)

Types of extrinsic are now therefore:
- Bare (no hardcoded signature, no Extra data; used to be known as
"Unsigned")
- Bare transactions (deprecated): Gossiped, validated with
`ValidateUnsigned` (deprecated) and the `_bare_compat` bits of
`TransactionExtension` (deprecated).
  - Inherents: Not gossiped, validated with `ProvideInherent`.
- Extended (Extra data): Gossiped, validated via `TransactionExtension`.
  - Signed transactions (with a hardcoded signature).
  - General transactions (without a hardcoded signature).

`TransactionExtension` differs from `SignedExtension` because:
- A signature on the underlying transaction may validly not be present.
- It may alter the origin during validation.
- `pre_dispatch` is renamed to `prepare` and need not contain the checks
present in `validate`.
- `validate` and `prepare` is passed an `Origin` rather than a
`AccountId`.
- `validate` may pass arbitrary information into `prepare` via a new
user-specifiable type `Val`.
- `AdditionalSigned`/`additional_signed` is renamed to
`Implicit`/`implicit`. It is encoded *for the entire transaction* and
passed in to each extension as a new argument to `validate`. This
facilitates the ability of extensions to acts as underlying crypto.

There is a new `DispatchTransaction` trait which contains only default
function impls and is impl'ed for any `TransactionExtension` impler. It
provides several utility functions which reduce some of the tedium from
using `TransactionExtension` (indeed, none of its regular functions
should now need to be called directly).

Three transaction version discriminator ("versions") are now
permissible:
- 0b000000100: Bare (used to be called "Unsigned"): contains Signature
or Extra (extension data). After bare transactions are no longer
supported, this will strictly identify an Inherents only.
- 0b100000100: Old-school "Signed" Transaction: contains Signature and
Extra (extension data).
- 0b010000100: New-school "General" Transaction: contains Extra
(extension data), but no Signature.

For the New-school General Transaction, it becomes trivial for authors
to publish extensions to the mechanism for authorizing an Origin, e.g.
through new kinds of key-signing schemes, ZK proofs, pallet state,
mutations over pre-authenticated origins or any combination of the
above.

## Code Migration

### NOW: Getting it to build

Wrap your `SignedExtension`s in `AsTransactionExtension`. This should be
accompanied by renaming your aggregate type in line with the new
terminology. E.g. Before:

```rust
/// The SignedExtension to the basic transaction logic.
pub type SignedExtra = (
	/* snip */
	MySpecialSignedExtension,
);
/// Unchecked extrinsic type as expected by this runtime.
pub type UncheckedExtrinsic =
	generic::UncheckedExtrinsic<Address, RuntimeCall, Signature, SignedExtra>;
```

After:

```rust
/// The extension to the basic transaction logic.
pub type TxExtension = (
	/* snip */
	AsTransactionExtension<MySpecialSignedExtension>,
);
/// Unchecked extrinsic type as expected by this runtime.
pub type UncheckedExtrinsic =
	generic::UncheckedExtrinsic<Address, RuntimeCall, Signature, TxExtension>;
```

You'll also need to alter any transaction building logic to add a
`.into()` to make the conversion happen. E.g. Before:

```rust
fn construct_extrinsic(
		/* snip */
) -> UncheckedExtrinsic {
	let extra: SignedExtra = (
		/* snip */
		MySpecialSignedExtension::new(/* snip */),
	);
	let payload = SignedPayload::new(call.clone(), extra.clone()).unwrap();
	let signature = payload.using_encoded(|e| sender.sign(e));
	UncheckedExtrinsic::new_signed(
		/* snip */
		Signature::Sr25519(signature),
		extra,
	)
}
```

After:

```rust
fn construct_extrinsic(
		/* snip */
) -> UncheckedExtrinsic {
	let tx_ext: TxExtension = (
		/* snip */
		MySpecialSignedExtension::new(/* snip */).into(),
	);
	let payload = SignedPayload::new(call.clone(), tx_ext.clone()).unwrap();
	let signature = payload.using_encoded(|e| sender.sign(e));
	UncheckedExtrinsic::new_signed(
		/* snip */
		Signature::Sr25519(signature),
		tx_ext,
	)
}
```

### SOON: Migrating to `TransactionExtension`

Most `SignedExtension`s can be trivially converted to become a
`TransactionExtension`. There are a few things to know.

- Instead of a single trait like `SignedExtension`, you should now
implement two traits individually: `TransactionExtensionBase` and
`TransactionExtension`.
- Weights are now a thing and must be provided via the new function `fn
weight`.

#### `TransactionExtensionBase`

This trait takes care of anything which is not dependent on types
specific to your runtime, most notably `Call`.

- `AdditionalSigned`/`additional_signed` is renamed to
`Implicit`/`implicit`.
- Weight must be returned by implementing the `weight` function. If your
extension is associated with a pallet, you'll probably want to do this
via the pallet's existing benchmarking infrastructure.

#### `TransactionExtension`

Generally:
- `pre_dispatch` is now `prepare` and you *should not reexecute the
`validate` functionality in there*!
- You don't get an account ID any more; you get an origin instead. If
you need to presume an account ID, then you can use the trait function
`AsSystemOriginSigner::as_system_origin_signer`.
- You get an additional ticket, similar to `Pre`, called `Val`. This
defines data which is passed from `validate` into `prepare`. This is
important since you should not be duplicating logic from `validate` to
`prepare`, you need a way of passing your working from the former into
the latter. This is it.
- This trait takes two type parameters: `Call` and `Context`. `Call` is
the runtime call type which used to be an associated type; you can just
move it to become a type parameter for your trait impl. `Context` is not
currently used and you can safely implement over it as an unbounded
type.
- There's no `AccountId` associated type any more. Just remove it.

Regarding `validate`:
- You get three new parameters in `validate`; all can be ignored when
migrating from `SignedExtension`.
- `validate` returns a tuple on success; the second item in the tuple is
the new ticket type `Self::Val` which gets passed in to `prepare`. If
you use any information extracted during `validate` (off-chain and
on-chain, non-mutating) in `prepare` (on-chain, mutating) then you can
pass it through with this. For the tuple's last item, just return the
`origin` argument.

Regarding `prepare`:
- This is renamed from `pre_dispatch`, but there is one change:
- FUNCTIONALITY TO VALIDATE THE TRANSACTION NEED NOT BE DUPLICATED FROM
`validate`!!
- (This is different to `SignedExtension` which was required to run the
same checks in `pre_dispatch` as in `validate`.)

Regarding `post_dispatch`:
- Since there are no unsigned transactions handled by
`TransactionExtension`, `Pre` is always defined, so the first parameter
is `Self::Pre` rather than `Option<Self::Pre>`.

If you make use of `SignedExtension::validate_unsigned` or
`SignedExtension::pre_dispatch_unsigned`, then:
- Just use the regular versions of these functions instead.
- Have your logic execute in the case that the `origin` is `None`.
- Ensure your transaction creation logic creates a General Transaction
rather than a Bare Transaction; this means having to include all
`TransactionExtension`s' data.
- `ValidateUnsigned` can still be used (for now) if you need to be able
to construct transactions which contain none of the extension data,
however these will be phased out in stage 2 of the Transactions Horizon,
so you should consider moving to an extension-centric design.

## TODO

- [x] Introduce `CheckSignature` impl of `TransactionExtension` to
ensure it's possible to have crypto be done wholly in a
`TransactionExtension`.
- [x] Deprecate `SignedExtension` and move all uses in codebase to
`TransactionExtension`.
  - [x] `ChargeTransactionPayment`
  - [x] `DummyExtension`
  - [x] `ChargeAssetTxPayment` (asset-tx-payment)
  - [x] `ChargeAssetTxPayment` (asset-conversion-tx-payment)
  - [x] `CheckWeight`
  - [x] `CheckTxVersion`
  - [x] `CheckSpecVersion`
  - [x] `CheckNonce`
  - [x] `CheckNonZeroSender`
  - [x] `CheckMortality`
  - [x] `CheckGenesis`
  - [x] `CheckOnlySudoAccount`
  - [x] `WatchDummy`
  - [x] `PrevalidateAttests`
  - [x] `GenericSignedExtension`
  - [x] `SignedExtension` (chain-polkadot-bulletin)
  - [x] `RefundSignedExtensionAdapter`
- [x] Implement `fn weight` across the board.
- [ ] Go through all pre-existing extensions which assume an account
signer and explicitly handle the possibility of another kind of origin.
- [x] `CheckNonce` should probably succeed in the case of a non-account
origin.
- [x] `CheckNonZeroSender` should succeed in the case of a non-account
origin.
- [x] `ChargeTransactionPayment` and family should fail in the case of a
non-account origin.
  - [ ] 
- [x] Fix any broken tests.

---------

Signed-off-by: georgepisaltu <[email protected]>
Signed-off-by: Alexandru Vasile <[email protected]>
Signed-off-by: dependabot[bot] <[email protected]>
Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Signed-off-by: Alexandru Gheorghe <[email protected]>
Signed-off-by: Andrei Sandu <[email protected]>
Co-authored-by: Nikhil Gupta <[email protected]>
Co-authored-by: georgepisaltu <[email protected]>
Co-authored-by: Chevdor <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Maciej <[email protected]>
Co-authored-by: Javier Viola <[email protected]>
Co-authored-by: Marcin S. <[email protected]>
Co-authored-by: Tsvetomir Dimitrov <[email protected]>
Co-authored-by: Javier Bullrich <[email protected]>
Co-authored-by: Koute <[email protected]>
Co-authored-by: Adrian Catangiu <[email protected]>
Co-authored-by: Vladimir Istyufeev <[email protected]>
Co-authored-by: Ross Bulat <[email protected]>
Co-authored-by: Gonçalo Pestana <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Svyatoslav Nikolsky <[email protected]>
Co-authored-by: André Silva <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: s0me0ne-unkn0wn <[email protected]>
Co-authored-by: ordian <[email protected]>
Co-authored-by: Sebastian Kunert <[email protected]>
Co-authored-by: Aaro Altonen <[email protected]>
Co-authored-by: Dmitry Markin <[email protected]>
Co-authored-by: Alexandru Vasile <[email protected]>
Co-authored-by: Alexander Samusev <[email protected]>
Co-authored-by: Julian Eager <[email protected]>
Co-authored-by: Michal Kucharczyk <[email protected]>
Co-authored-by: Davide Galassi <[email protected]>
Co-authored-by: Dónal Murray <[email protected]>
Co-authored-by: yjh <[email protected]>
Co-authored-by: Tom Mi <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Will | Paradox | ParaNodes.io <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Joshy Orndorff <[email protected]>
Co-authored-by: Joshy Orndorff <[email protected]>
Co-authored-by: PG Herveou <[email protected]>
Co-authored-by: Alexander Theißen <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: Juan Girini <[email protected]>
Co-authored-by: bader y <[email protected]>
Co-authored-by: James Wilson <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: asynchronous rob <[email protected]>
Co-authored-by: Parth <[email protected]>
Co-authored-by: Andrew Jones <[email protected]>
Co-authored-by: Jonathan Udd <[email protected]>
Co-authored-by: Serban Iorga <[email protected]>
Co-authored-by: Egor_P <[email protected]>
Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: Evgeny Snitko <[email protected]>
Co-authored-by: Just van Stam <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: gupnik <[email protected]>
Co-authored-by: dzmitry-lahoda <[email protected]>
Co-authored-by: zhiqiangxu <[email protected]>
Co-authored-by: Nazar Mokrynskyi <[email protected]>
Co-authored-by: Anwesh <[email protected]>
Co-authored-by: cheme <[email protected]>
Co-authored-by: Sam Johnson <[email protected]>
Co-authored-by: kianenigma <[email protected]>
Co-authored-by: Jegor Sidorenko <[email protected]>
Co-authored-by: Muharem <[email protected]>
Co-authored-by: joepetrowski <[email protected]>
Co-authored-by: Alexandru Gheorghe <[email protected]>
Co-authored-by: Gabriel Facco de Arruda <[email protected]>
Co-authored-by: Squirrel <[email protected]>
Co-authored-by: Andrei Sandu <[email protected]>
Co-authored-by: georgepisaltu <[email protected]>
Co-authored-by: command-bot <>

This MR is the merge of
https://github.com/paritytech/substrate/pull/14414 and
https://github.com/paritytech/substrate/pull/14275. It implements
[RFC#13](https://github.com/polkadot-fellows/RFCs/pull/13), closes
https://github.com/paritytech/polkadot-sdk/issues/198.

----- 

This Merge request introduces three major topicals:

1. Multi-Block-Migrations
1. New pallet `poll` hook for periodic service work
1. Replacement hooks for `on_initialize` and `on_finalize` in cases
where `poll` cannot be used

and some more general changes to FRAME.  
The changes for each topical span over multiple crates. They are listed
in topical order below.

# 1.) Multi-Block-Migrations

Multi-Block-Migrations are facilitated by creating `pallet_migrations`
and configuring `System::Config::MultiBlockMigrator` to point to it.
Executive picks this up and triggers one step of the migrations pallet
per block.
The chain is in lockdown mode for as long as an MBM is ongoing.
Executive does this by polling `MultiBlockMigrator::ongoing` and not
allowing any transaction in a block, if true.

A MBM is defined through trait `SteppedMigration`. A condensed version
looks like this:
```rust
/// A migration that can proceed in multiple steps.
pub trait SteppedMigration {
	type Cursor: FullCodec + MaxEncodedLen;
	type Identifier: FullCodec + MaxEncodedLen;

	fn id() -> Self::Identifier;

	fn max_steps() -> Option<u32>;

	fn step(
		cursor: Option<Self::Cursor>,
		meter: &mut WeightMeter,
	) -> Result<Option<Self::Cursor>, SteppedMigrationError>;
}
```

`pallet_migrations` can be configured with an aggregated tuple of these
migrations. It then starts to migrate them one-by-one on the next
runtime upgrade.
Two things are important here:
- 1. Doing another runtime upgrade while MBMs are ongoing is not a good
idea and can lead to messed up state.
- 2. **Pallet Migrations MUST BE CONFIGURED IN `System::Config`,
otherwise it is not used.**

The pallet supports an `UpgradeStatusHandler` that can be used to notify
external logic of upgrade start/finish (for example to pause XCM
dispatch).

Error recovery is very limited in the case that a migration errors or
times out (exceeds its `max_steps`). Currently the runtime dev can
decide in `FailedMigrationHandler::failed` how to handle this. One
follow-up would be to pair this with the `SafeMode` pallet and enact
safe mode when an upgrade fails, to allow governance to rescue the
chain. This is currently not possible, since governance is not
`Mandatory`.

## Runtime API

- `Core`: `initialize_block` now returns `ExtrinsicInclusionMode` to
inform the Block Author whether they can push transactions.

### Integration

Add it to your runtime implementation of `Core` and `BlockBuilder`:
```patch
diff --git a/runtime/src/lib.rs b/runtime/src/lib.rs
@@ impl_runtime_apis! {
	impl sp_block_builder::Core<Block> for Runtime {
-		fn initialize_block(header: &<Block as BlockT>::Header) {
+		fn initialize_block(header: &<Block as BlockT>::Header) -> RuntimeExecutiveMode {
			Executive::initialize_block(header)
		}

		...
	}
```

# 2.) `poll` hook

A new pallet hook is introduced: `poll`. `Poll` is intended to replace
mostly all usage of `on_initialize`.
The reason for this is that any code that can be called from
`on_initialize` cannot be migrated through an MBM. Currently there is no
way to statically check this; the implication is to use `on_initialize`
as rarely as possible.
Failing to do so can result in broken storage invariants.

The implementation of the poll hook depends on the `Runtime API` changes
that are explained above.

# 3.) Hard-Deadline callbacks

Three new callbacks are introduced and configured on `System::Config`:
`PreInherents`, `PostInherents` and `PostTransactions`.
These hooks are meant as replacement for `on_initialize` and
`on_finalize` in cases where the code that runs cannot be moved to
`poll`.
The reason for this is to make the usage of HD-code (hard deadline) more
explicit - again to prevent broken invariants by MBMs.

# 4.) FRAME (general changes)

## `frame_system` pallet

A new memorize storage item `InherentsApplied` is added. It is used by
executive to track whether inherents have already been applied.
Executive and can then execute the MBMs directly between inherents and
transactions.

The `Config` gets five new items:
- `SingleBlockMigrations` this is the new way of configuring migrations
that run in a single block. Previously they were defined as last generic
argument of `Executive`. This shift is brings all central configuration
about migrations closer into view of the developer (migrations that are
configured in `Executive` will still work for now but is deprecated).
- `MultiBlockMigrator` this can be configured to an engine that drives
MBMs. One example would be the `pallet_migrations`. Note that this is
only the engine; the exact MBMs are injected into the engine.
- `PreInherents` a callback that executes after `on_initialize` but
before inherents.
- `PostInherents` a callback that executes after all inherents ran
(including MBMs and `poll`).
- `PostTransactions` in symmetry to `PreInherents`, this one is called
before `on_finalize` but after all transactions.

A sane default is to set all of these to `()`. Example diff suitable for
any chain:
```patch
@@ impl frame_system::Config for Test {
 	type MaxConsumers = ConstU32<16>;
+	type SingleBlockMigrations = ();
+	type MultiBlockMigrator = ();
+	type PreInherents = ();
+	type PostInherents = ();
+	type PostTransactions = ();
 }
```

An overview of how the block execution now looks like is here. The same
graph is also in the rust doc.

<details><summary>Block Execution Flow</summary>
<p>

![Screenshot 2023-12-04 at 19 11
29](https://github.com/paritytech/polkadot-sdk/assets/10380170/e88a80c4-ef11-4faa-8df5-8b33a724c054)

</p>
</details> 

## Inherent Order

Moved to https://github.com/paritytech/polkadot-sdk/pull/2154



---------------


## TODO

- [ ] Check that `try-runtime` still works
- [ ] Ensure backwards compatibility with old Runtime APIs
- [x] Consume weight correctly
- [x] Cleanup

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Juan Girini <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Gavin Wood <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

[frame] `#[pallet::composite_enum]` improved variant count handling + removed `pallet_balances`'s `MaxHolds` config (#2657)

I started this investigation/issue based on @liamaharon question
[here](https://github.com/paritytech/polkadot-sdk/pull/1801#discussion_r1410452499).

## Problem

The `pallet_balances` integrity test should correctly detect that the
runtime has correct distinct `HoldReasons` variant count. I assume the
same situation exists for RuntimeFreezeReason.

It is not a critical problem, if we set `MaxHolds` with a sufficiently
large value, everything should be ok. However, in this case, the
integrity_test check becomes less useful.

**Situation for "any" runtime:**
- `HoldReason` enums from different pallets:
```rust
        /// from pallet_nis
        #[pallet::composite_enum]
	pub enum HoldReason {
		NftReceipt,
	}

        /// from pallet_preimage
        #[pallet::composite_enum]
	pub enum HoldReason {
		Preimage,
	}

        // from pallet_state-trie-migration
        #[pallet::composite_enum]
	pub enum HoldReason {
		SlashForContinueMigrate,
		SlashForMigrateCustomTop,
		SlashForMigrateCustomChild,
	}
```

- generated `RuntimeHoldReason` enum looks like:
```rust
pub enum RuntimeHoldReason {

    #[codec(index = 32u8)]
    Preimage(pallet_preimage::HoldReason),

    #[codec(index = 38u8)]
    Nis(pallet_nis::HoldReason),

    #[codec(index = 42u8)]
    StateTrieMigration(pallet_state_trie_migration::HoldReason),
}
```

- composite enum `RuntimeHoldReason` variant count is detected as `3`
- we set `type MaxHolds = ConstU32<3>`
- `pallet_balances::integrity_test` is ok with `3`(at least 3)

However, the real problem can occur in a live runtime where some
functionality might stop working. This is due to a total of 5 distinct
hold reasons (for pallets with multi-instance support, it is even more),
and not all of them can be used because of an incorrect `MaxHolds`,
which is deemed acceptable according to the `integrity_test`:
  ```
  // pseudo-code - if we try to call all of these:

T::Currency::hold(&pallet_nis::HoldReason::NftReceipt.into(),
&nft_owner, deposit)?;
T::Currency::hold(&pallet_preimage::HoldReason::Preimage.into(),
&nft_owner, deposit)?;

T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForContinueMigrate.into(),
&nft_owner, deposit)?;

  // With `type MaxHolds = ConstU32<3>` these two will fail

T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomTop.into(),
&nft_owner, deposit)?;

T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomChild.into(),
&nft_owner, deposit)?;
  ```  


## Solutions

A macro `#[pallet::*]` expansion is extended of `VariantCount`
implementation for the `#[pallet::composite_enum]` enum type. This
expansion generates the `VariantCount` implementation for pallets'
`HoldReason`, `FreezeReason`, `LockId`, and `SlashReason`. Enum variants
must be plain enum values without fields to ensure a deterministic
count.

The composite runtime enum, `RuntimeHoldReason` and
`RuntimeFreezeReason`, now sets `VariantCount::VARIANT_COUNT` as the sum
of pallets' enum `VariantCount::VARIANT_COUNT`:
```rust
#[frame_support::pallet(dev_mode)]
mod module_single_instance {

	#[pallet::composite_enum]
	pub enum HoldReason {
		ModuleSingleInstanceReason1,
		ModuleSingleInstanceReason2,
	}
...
}

#[frame_support::pallet(dev_mode)]
mod module_multi_instance {

	#[pallet::composite_enum]
	pub enum HoldReason<I: 'static = ()> {
		ModuleMultiInstanceReason1,
		ModuleMultiInstanceReason2,
		ModuleMultiInstanceReason3,
	}
...
}


impl self::sp_api_hidden_includes_construct_runtime::hidden_include::traits::VariantCount
    for RuntimeHoldReason
{
    const VARIANT_COUNT: u32 = 0
        + module_single_instance::HoldReason::VARIANT_COUNT
        + module_multi_instance::HoldReason::<module_multi_instance::Instance1>::VARIANT_COUNT
        + module_multi_instance::HoldReason::<module_multi_instance::Instance2>::VARIANT_COUNT
        + module_multi_instance::HoldReason::<module_multi_instance::Instance3>::VARIANT_COUNT;
}
```

In addition, `MaxHolds` is removed (as suggested
[here](https://github.com/paritytech/polkadot-sdk/pull/2657#discussion_r1443324573))
from `pallet_balances`, and its `Holds` are now bounded to
`RuntimeHoldReason::VARIANT_COUNT`. Therefore, there is no need to let
the runtime specify `MaxHolds`.


## For reviewers

Relevant changes can be found here:
- `substrate/frame/support/procedural/src/lib.rs` 
-  `substrate/frame/support/procedural/src/pallet/parse/composite.rs`
-  `substrate/frame/support/procedural/src/pallet/expand/composite.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/composite_helper.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/hold_reason.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/freeze_reason.rs`
- `substrate/frame/support/src/traits/misc.rs`

And the rest of the files is just about removed `MaxHolds` from
`pallet_balances`

## Next steps

Do the same for `MaxFreezes`
https://github.com/paritytech/polkadot-sdk/issues/2997

.

---------

Co-authored-by: command-bot <>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Dónal Murray <[email protected]>
Co-authored-by: gupnik <[email protected]>

Clean up all the old syntax.

---------

Co-authored-by: command-bot <>
Co-authored-by: gupnik <[email protected]>
Co-authored-by: Nikhil Gupta <[email protected]>
Co-authored-by: Maksym H <[email protected]>

Backport of https://github.com/paritytech/polkadot-sdk/pull/1863 to
master

Extend candidate sanitation in paras_inherent by removing backing votes
from disabled validators. Check
https://github.com/paritytech/polkadot-sdk/issues/1592 for more details.

This change is related to the disabling strategy implementation
(https://github.com/paritytech/polkadot-sdk/pull/2226

).

---------

Co-authored-by: ordian <[email protected]>
Co-authored-by: ordian <[email protected]>
Co-authored-by: Maciej <[email protected]>

# Note for reviewer

Most changes are just syntax changes necessary for the new version.
Most important files should be the ones under the `xcm` folder.

# Description 

Added XCMv4.

## Removed `Multi` prefix
The following types have been renamed:
- MultiLocation -> Location
- MultiAsset -> Asset
- MultiAssets -> Assets
- InteriorMultiLocation -> InteriorLocation
- MultiAssetFilter -> AssetFilter
- VersionedMultiAsset -> VersionedAsset
- WildMultiAsset -> WildAsset
- VersionedMultiLocation -> VersionedLocation

In order to fix a name conflict, the `Assets` in `xcm-executor` were
renamed to `HoldingAssets`, as they represent assets in holding.

## Removed `Abstract` asset id

It was not being used anywhere and this simplifies the code.

Now assets are just constructed as follows:

```rust
let asset: Asset = (AssetId(Location::new(1, Here)), 100u128).into();
```

No need for specifying `Concrete` anymore.

## Outcome is now a named fields struct

Instead of

```rust
pub enum Outcome {
  Complete(Weight),
  Incomplete(Weight, Error),
  Error(Error),
}
```

we now have

```rust
pub enum Outcome {
  Complete { used: Weight },
  Incomplete { used: Weight, error: Error },
  Error { error: Error },
}
```

## Added Reanchorable trait

Now both locations and assets implement this trait, making it easier to
reanchor both.

## New syntax for building locations and junctions

Now junctions are built using the following methods:

```rust
let location = Location {
    parents: 1,
    interior: [Parachain(1000), PalletInstance(50), GeneralIndex(1984)].into()
};
```

or

```rust
let location = Location::new(1, [Parachain(1000), PalletInstance(50), GeneralIndex(1984)]);
```

And they are matched like so:

```rust
match location.unpack() {
  (1, [Parachain(id)]) => ...
  (0, Here) => ...,
  (1, [_]) => ...,
}
```

This syntax is mandatory in v4, and has been also implemented for v2 and
v3 for easier migration.

This was needed to make all sizes smaller.

# TODO
- [x] Scaffold v4
- [x] Port github.com/paritytech/polkadot/pull/7236
- [x] Remove `Multi` prefix
- [x] Remove `Abstract` asset id

---------

Co-authored-by: command-bot <>
Co-authored-by: Keith Yeung <[email protected]>

Also fixes: https://github.com/paritytech/polkadot-sdk/issues/1417



- [x] CoreIndex -> AssignmentProvider mapping will be able to change any
time.
- [x] Implement
- [x] Provide Migrations
- [x] Add and fix tests
- [x] Implement bulk assigner logic
- [x] bulk assigner tests
- [x] Port over current assigner to use bulk designer (+ share on-demand
with bulk): top-level assigner has core ranges: legacy, bulk
- [x] Adjust migrations to reflect new assigner structure
- [x] Move migration code to Assignment code directly and make it
recursive (make it possible to skip releases) -> follow up ticket.
- [x] Test migrations
- [x] Add migration PR to runtimes repo -> follow up ticket.
- [x] Wire up with actual UMP messages
- [x] Write PR docs

---------

Co-authored-by: eskimor <[email protected]>
Co-authored-by: Bradley Olson <[email protected]>
Co-authored-by: BradleyOlson64 <[email protected]>
Co-authored-by: Anton Vilhelm Ásgeirsson <[email protected]>
Co-authored-by: antonva <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Marcin S. <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: command-bot <>

Partially Addresses #2500

Adds a `deprecate_controller_batch` call to the staking pallet that is
callable by `Root` and `StakingAdmin`. To be used for controller account
deprecation and removed thereafter. Adds
`MaxControllersDeprecationBatch` pallet constant that defines max
possible deprecations per call.

- [x] Add `deprecate_controller_batch` call, and
`MaxControllersInDeprecationBatch` constant.
- [x] Add tests, benchmark, weights. Tests that weight is only consumed
if unique pair.
- [x] Adds `StakingAdmin` origin to staking's `AdminOrigin` type in
westend runtime.
- [x] Determined that worst case 5,900 deprecations does fit into
`maxBlock` `proofSize` and `refTime` in both normal and operational
thresholds, meaning we can deprecate all controllers for each network in
one call.

## Block Weights

By querying `consts.system.blockWeights` we can see that the
`deprecate_controller_batch` weights fit within the `normal` threshold
on Polkadot.

#### `controller_deprecation_batch` where i = 5900:
#### Ref time: 69,933,325,300
#### Proof size: 21,040,390

### Polkadot 

```
// consts.query.blockWeights

maxBlock: {
        refTime: 2,000,000,000,000
        proofSize: 18,446,744,073,709,551,615
}
normal: {
 maxExtrinsic: {
	refTime: 1,479,873,955,000
	proofSize: 13,650,590,614,545,068,195
 }
 maxTotal: {
	refTime: 1,500,000,000,000
	proofSize: 13,835,058,055,282,163,711
 }
}
```

### Kusama

```
// consts.query.blockWeights

  maxBlock: {
    refTime: 2,000,000,000,000
    proofSize: 18,446,744,073,709,551,615
  }
    normal: {
      maxExtrinsic: {
        refTime: 1,479,875,294,000
        proofSize: 13,650,590,614,545,068,195
      }
      maxTotal: {
        refTime: 1,500,000,000,000
        proofSize: 13,835,058,055,282,163,711
      }
}
```

---------

Co-authored-by: command-bot <>
Co-authored-by: Gonçalo Pestana <[email protected]>

This PR makes the block number provider configurable through the Config
trait in pallet-vesting, this gives parachains the option to use the
relay chain block number provider from ParachainSystem.

---------

Co-authored-by: Bastian Köcher <[email protected]>

The `BlockNumber` and `Hash` are fixed types any way.

helps https://github.com/paritytech/polkadot-sdk/issues/439.
closes https://github.com/paritytech/polkadot-sdk/issues/473.

PR link in the older substrate repository:
https://github.com/paritytech/substrate/pull/13498.

# Context
Rewards payout is processed today in a single block and limited to
`MaxNominatorRewardedPerValidator`. This number is currently 512 on both
Kusama and Polkadot.

This PR tries to scale the nominators payout to an unlimited count in a
multi-block fashion. Exposures are stored in pages, with each page
capped to a certain number (`MaxExposurePageSize`). Starting out, this
number would be the same as `MaxNominatorRewardedPerValidator`, but
eventually, this number can be lowered through new runtime upgrades to
limit the rewardeable nominators per dispatched call instruction.

The changes in the PR are backward compatible.

## How payouts would work like after this change
Staking exposes two calls, 1) the existing `payout_stakers` and 2)
`payout_stakers_by_page`.

### payout_stakers
This remains backward compatible with no signature change. If for a
given era a validator has multiple pages, they can call `payout_stakers`
multiple times. The pages are executed in an ascending sequence and the
runtime takes care of preventing double claims.

### payout_stakers_by_page
Very similar to `payout_stakers` but also accepts an extra param
`page_index`. An account can choose to payout rewards only for an
explicitly passed `page_index`.

**Lets look at an example scenario**
Given an active validator on Kusama had 1100 nominators,
`MaxExposurePageSize` set to 512 for Era e. In order to pay out rewards
to all nominators, the caller would need to call `payout_stakers` 3
times.

- `payout_stakers(origin, stash, e)` => will pay the first 512
nominators.
- `payout_stakers(origin, stash, e)` => will pay the second set of 512
nominators.
- `payout_stakers(origin, stash, e)` => will pay the last set of 76
nominators.
...
- `payout_stakers(origin, stash, e)` => calling it the 4th time would
return an error `InvalidPage`.

The above calls can also be replaced by `payout_stakers_by_page` and
passing a `page_index` explicitly.

## Commission note
Validator commission is paid out in chunks across all the pages where
each commission chunk is proportional to the total stake of the current
page. This implies higher the total stake of a page, higher will be the
commission. If all the pages of a validator's single era are paid out,
the sum of commission paid to the validator across all pages should be
equal to what the commission would have been if we had a non-paged
exposure.

### Migration Note
Strictly speaking, we did not need to bump our storage version since
there is no migration of storage in this PR. But it is still useful to
mark a storage upgrade for the following reasons:

- New storage items are introduced in this PR while some older storage
items are deprecated.
- For the next `HistoryDepth` eras, the exposure would be incrementally
migrated to its corresponding paged storage item.
- Runtimes using staking pallet would strictly need to wait at least
`HistoryDepth` eras with current upgraded version (14) for the migration
to complete. At some era `E` such that `E >
era_at_which_V14_gets_into_effect + HistoryDepth`, we will upgrade to
version X which will remove the deprecated storage items.
In other words, it is a strict requirement that E<sub>x</sub> -
E<sub>14</sub> > `HistoryDepth`, where
E<sub>x</sub> = Era at which deprecated storages are removed from
runtime,
E<sub>14</sub> = Era at which runtime is upgraded to version 14.
- For Polkadot and Kusama, there is a [tracker
ticket](https://github.com/paritytech/polkadot-sdk/issues/433) to clean
up the deprecated storage items.

### Storage Changes

#### Added
- ErasStakersOverview
- ClaimedRewards
- ErasStakersPaged

#### Deprecated
The following can be cleaned up after 84 eras which is tracked
[here](https://github.com/paritytech/polkadot-sdk/issues/433).

- ErasStakers.
- ErasStakersClipped.
- StakingLedger.claimed_rewards, renamed to
StakingLedger.legacy_claimed_rewards.

### Config Changes
- Renamed MaxNominatorRewardedPerValidator to MaxExposurePageSize.

### TODO
- [x] Tracker ticket for cleaning up the old code after 84 eras.
- [x] Add companion.
- [x] Redo benchmarks before merge.
- [x] Add Changelog for pallet_staking.
- [x] Pallet should be configurable to enable/disable paged rewards.
- [x] Commission payouts are distributed across pages.
- [x] Review documentation thoroughly.
- [x] Rename `MaxNominatorRewardedPerValidator` ->
`MaxExposurePageSize`.
- [x] NMap for `ErasStakersPaged`.
- [x] Deprecate ErasStakers.
- [x] Integrity tests.

### Followup issues
[Runtime api for deprecated ErasStakers storage
item](https://github.com/paritytech/polkadot-sdk/issues/426

)

---------

Co-authored-by: Javier Viola <[email protected]>
Co-authored-by: Ross Bulat <[email protected]>
Co-authored-by: command-bot <>

closes https://github.com/paritytech/polkadot-sdk/issues/1882



## Breaking Changes

This PR introduces a new item to `pallet_balances::Config`:

```diff
trait Config {
++    type RuntimeFreezeReasons;
}
```

This value is only used to check it against `type MaxFreeze`. A similar
check has been added for `MaxHolds` against `RuntimeHoldReasons`, which
is already given to `pallet_balances`.

In all contexts, you should pass the real `RuntimeFreezeReasons`
generated by `construct_runtime` to `type RuntimeFreezeReasons`. Passing
`()` would also work, but it would imply that the runtime uses no
freezes at all.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

- Async-backing related primitives are stable `primitives::v6`
- Async-backing API is now part of `api_version(7)`
- It's enabled on Rococo and Westend runtimes

---------

Signed-off-by: Andrei Sandu <[email protected]>
Co-authored-by: Andrei Sandu <[email protected]>

This PR implements [`GenesisBuilder`
API](https://github.com/paritytech/polkadot-sdk/blob/a414ea7515c9cdc81f1d12410e646afc148250e8/substrate/primitives/genesis-builder/src/lib.rs#L38

)
for all the runtimes in polkadot repo.

Step towards: paritytech/polkadot-sdk#25

---------

Co-authored-by: ordian <[email protected]>

* rfc14

* Update polkadot/runtime/common/src/paras_registrar/mod.rs

Co-authored-by: Bastian Köcher <[email protected]>

* Update polkadot/runtime/common/src/paras_registrar/mod.rs

Co-authored-by: Bastian Köcher <[email protected]>

* Update polkadot/runtime/common/src/paras_registrar/mod.rs

Co-authored-by: Bastian Köcher <[email protected]>

* fmt

* fix

* Update polkadot/runtime/common/src/paras_registrar/migration.rs

Co-authored-by: Oliver Tale-Yazdi <[email protected]>

* fmt

* 2224 is unlocked

* update migration list

* update comment

* use VersionedMigration

---------

Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

* First baby steps

* Split scheduler into several modules

* Towards a more modular approach for scheduling

* move free_cores; IntoInterator -> BTreeMap

* Move clear()

* Move more functions out of scheduler

* Change weight composition

* More abstraction

* Further refactor

* clippy

* fmt

* fix test-runtime

* Add parathreads pallet to construct_runtime!

* Make all runtimes use (Parachains, Parathreads) scheduling

* Delete commented out code

* Remove parathreads scheduler from westend, rococo, and kusama

* fix rococo, westend, and kusama config

* Revert "fix rococo, westend, and kusama config"

This reverts commit 59e4de380d5c7d17eaaba5e2c2b81405de3465e3.

* Revert "Remove parathreads scheduler from westend, rococo, and kusama"

This reverts commit 4c44255296083ac5670560790ed77104917890a4.

* Remove CoreIndex from free_cores

* Remove unnecessary struct for parathreads

* parathreads provider take 1

* Comment out parathread tests

* Pop into lookahead

* fmt

* Fill lookahead with two entries for parachains

* fmt

* Current stage

* Towards ab parathreads

* no AB use

* Make tests typecheck

* quick hack to set scheduling lookahead to 1

* Fix scheduler tests

* fix paras_inherent tests

* misc

* Update more of a test

* cfg(test)

* some cleanup

* Undo paras_inherent changes

* Adjust paras inherent tests

* Undo changes to v2 primitives

* Undo v2 mod changes to tests

* minor

* Remove parathreads assigner and pallet

* minor

* minor

* more cleanup

* fmt

* minor

* minor

* minor

* Remove on_new_session from assignment provider

* Make adder collator integration test pass

* disable failing unit tests

* minor

* minor

* re-enable one unit test

* minor

* handle retries, add concluded para to pop interface

* comment out unused code

* Remove core_para from interface

* Remove first claimqueue element on clear if None instead removing all Nones

* Move claimqueue get out of loop

* Use VecDeque instead of Ved in ClaimQueue

* Make occupied() AB ready(?)

* handle freed disputed in clear_and_fill_claimqueue

* clear_and_fill_claimqueue returns scheduled Vec

* Rename and minor refactor

* return position of assignment taken from claimqueue

* minor

* Fix session boundary parachains number change + extended test

* Fix runtimes

* Fix polkadot runtime

* Remove polkadot pallet from benchmarks

* fix test runtime

* Add storage migration

* Minor refactor

* Minor

* migratin typechecks

* Add migration to runtimes

* Towards modular scheduling II (#6568)

* Add post migration check

* pebkac

* Disable migrations but mine

* Revert "Disable migrations but mine"

This reverts commit 4fa5c5a370c199944a7e0926f50b08626bfbad4c.

* Move scheduler migration

* Revert "Move scheduler migration"

This reverts commit a16b1659a907950bae048a9f7010f2aa76e02b6d.

* Fix migration

* cleanup

* Don't lose retries value anymore

* comment out test function

* Remove retries value from Assignment again

* minor

* Make collator for parathreads optional

* data type refactor

* update scheduler tests

* Change test function cfg

* comment out test function

* Try cfg(test) only

* fix cfg flags

* Add get_max_retries function to provider interface (#7047)

* Fix merge commit

* pebkac

* fix merge

* update cargo.lock

* fix merge

* fix merge

* Use btreemap instead of vec, fix scheduler calls.

* Use imported `ScheduledCore`

* Remove unused import in inclusion tests

* Use keys() instead of mapping over a BTreeMap

* Fix migrations for parachains scheduler

* Use BlockNumberFor<T> everywhere in scheduler

* Add on demand assignment provider pallet (#7110)

* Address some PR comments

* minor

* more cleanup

* find_map and timeout availability fixes

* Change default scheduling_lookahead to 1

* Add on demand assignment provider pallet

* Move test-runtime to new assignment provider

* Run cargo format on scheduler tests

* minor

* Mutate cores in single loop

* timeout predicate simplification

* claimqueue desired size fix

* Replace expect by ok_or

* More improvements

* Fix push back order and next_up_on_timeout

* minor

* session change docs

* Add pre_new_session call to hand pre session updates

* Remove sc_network dependency and PeerId from unnecessary data structures

* Remove unnecessary peer_ids

* Add OnDemandOrdering proxy (#7156)

* Add OnDemandBidding proxy

* Fix names

* OnDemandAssigner for rococo only

* Check PeerId in collator protocol before fetching collation

* On occupied, remove non occupied cores from the claimqueue front and refill

* Add missing docs

* Comment out unused field

* fix ScheduledCore in tests

* Fix the fix

* pebkac

* fmt

* Fix occupied dropping

* Remove double import

* ScheduledCore fixes

* Readd sc-network dep

* pebkac

* OpaquePeerId -> PeerId in can_collate interface

* Cargo.lock update for interface change

* Remove checks not needed anymore?

* Drop occupied core on session change if it would time out after the new session

* Add on demand assignment provider pallet

* Move test-runtime to new assignment provider

* Run cargo format on scheduler tests

* Add OnDemandOrdering proxy (#7156)

* Add OnDemandBidding proxy

* Fix names

* OnDemandAssigner for rococo only

* Remove unneeded config values

* Update comments

* Use and_then for queue position

* Return the max size of the spot queue on error

* Add comments to add_parathread_entry

* Add module comments

* Add log for when can_collate fails

* Change assigner queue type to `Assignment`

* Update assignment provider tests

* More logs

* Remove unused keyring import

* disable can_collate

* comment out can_collate

* Can collate first checks set if empty

* Move can_collate call to collation advertisement

* Fix backing test

* map to loop

* Remove obsolete check

* Move invalid collation test from backing to collator-protocol

* fix unused imports

* fix test

* fix Debug derivation

* Increase time limit on zombienet predicates

* Increase zombienet timeout

* Minor

* Address some PR comments

* Address PR comments

* Comment out failing assert due to on-demand assigner missing

* remove collator_restrictions info from backing

* Move can_collate to ActiveParas

* minor

* minor

* Update weight information for on demand config

* Add ttl to parasentry

* Fix tests missing parasentry ttl

* Adjust scheduler tests to use ttl default values

* Use match instead of if let for ttl drop

* Use RuntimeDebug trait for `ParasEntry` fields

* Add comments to on demand assignment pallet

* Fix spot traffic calculation

* Revert runtimedebug changes to primitives

* Remove runtimedebug derivation from `ParasEntry`

* Mention affinity in pallet level docs

* Use RuntimeDebug trait for ParasEntry child types

* Remove collator restrictions

* Fix primitive versioning and other merge issues

* Fix tests post merge

* Fix node side tests

* Edit parascheduler migration for clarity

* Move parascheduler migration up to next release

* Remove vestiges from merge

* Fix tests

* Refactor ttl handling

* Remove unused things from scheduler tests

* Move on demand assigner to own directory

* Update documentation

* Remove unused sc-network dependency in primitives

Was used for collator restrictions

* Remove unused import

* Reenable scheduler test

* Remove unused storage value

* Enable timeout predicate test and fix fn

Turns out that the issue with the compiler is fixed and we can now
use impl Trait in the manner used here.

* Remove unused imports

* Add benchmarking entry for perbill in config

* Correct typo

* Address review comments

* Log out errors when calculating spot traffic.

* Change parascheduler's log target name

* Update scheduler_common documentation

* Use mutate for affinity fns, add tests

* Add another on demand affinity test

* Unify parathreads and parachains in HostConfig (take 2) (#7452)

* Unify parathreads and parachains in HostConfig

* Fixed missed occurences

* Remove commented out lines

* `HostConfiguration v7`

* Fix version check

* Add `MigrateToV7` to `Unreleased`

* fmt

* fmt

* Fix compilation errors after the rebase

* Update runtime/parachains/src/scheduler/tests.rs

Co-authored-by: Anton Vilhelm Ásgeirsson <[email protected]>

* Update runtime/parachains/src/scheduler/tests.rs

Co-authored-by: Anton Vilhelm Ásgeirsson <[email protected]>

* fmt

* Fix migration test

* Fix tests

* Remove unneeded assert from tests

* parathread_cores -> on_demand_cores; parathread_retries -> on_demand_retries

* Fix a compilation error in tests

* Remove unused `use`

* update colander image version

---------

Co-authored-by: alexgparity <[email protected]>
Co-authored-by: Anton Vilhelm Ásgeirsson <[email protected]>
Co-authored-by: Javier Viola <[email protected]>

* Fix branch after merge with master

* Refactor out duplicate checks into a helper fn

* Fix tests post merge

* Rename add_parathread_assignment, add test

* Update docs

* Remove unused on_finalize function

* Add weight info to on demand pallet

* Update runtime/parachains/src/configuration.rs

Co-authored-by: Tsvetomir Dimitrov <[email protected]>

* Update runtime/parachains/src/scheduler_common/mod.rs

Co-authored-by: Tsvetomir Dimitrov <[email protected]>

* Update runtime/parachains/src/assigner_on_demand/mod.rs

Co-authored-by: Tsvetomir Dimitrov <[email protected]>

* Add benchmarking to on demand pallet

* Make place_order test check for success

* Add on demand benchmarks

* Add local test weights to rococo runtime

* Modify TTL drop behaviour to not skip claims

Previous behaviour would jump a new claim from the assignment provider
ahead in the claimqueue, assuming lookahead is larger than 1.

* Refactor ttl test to test claimqueue order

* Disable place_order ext. when no on_demand cores

* Use default genesis config for benchmark tests

* Refactor config builder param

* Move lifecycle test from scheduler to on demand

* Remove unneeded lifecycle test

Paras module via the parachain assignment provider doesn't provide
new assignments if a parachain loses it's lease. The on demand
assignment provider doesn't provide an assignment that is not a
parathread.

* Re enable validator shuffle test

* More realistic weights for place_order

* Remove redundant import

* Fix backwards compatibility (hopefully)

* ".git/.scripts/commands/bench/bench.sh" --subcommand=runtime --runtime=rococo --target_dir=polkadot --pallet=runtime_parachains::assigner_on_demand

* Fix tests.

* Fix off-by-one.

* Re enable claimqueue fills test

* Re enable schedule_rotates_groups test

* Fix fill_claimqueue_fills test

* Re enable next_up_on_timeout test, move fn

* Do not pop from assignment provider when retrying

* Fix tests missing collator in scheduledcore

* Add comment about timeout predicate.

* Rename parasentry retries to availability timeouts

* Re enable schedule_schedules... test

* Refactor prune retried test to new scheduler

* Have all scheduler tests use genesis_cfg fn

* Update docs

* Update copyright notices on new files

* Rename is_parachain_core to is_bulk_core

* Remove erroneous TODO

* Simplify import

* ".git/.scripts/commands/bench/bench.sh" --subcommand=runtime --runtime=rococo --target_dir=polkadot --pallet=runtime_parachains::configuration

* Revert AdvertiseCollation order shuffle

* Refactor place_order into keepalive and allowdeath

* Revert rename of hrmp max inbound channels

parachain encompasses both on demand and slot auction / bulk.

* Restore availability_timeout_predicate function

* Clean up leftover comments

* Update runtime/parachains/src/scheduler/tests.rs

Co-authored-by: Tsvetomir Dimitrov <[email protected]>

* ".git/.scripts/commands/bench/bench.sh" --subcommand=runtime --runtime=westend --target_dir=polkadot --pallet=runtime_parachains::configuration

---------

Co-authored-by: alexgparity <[email protected]>
Co-authored-by: alexgparity <[email protected]>
Co-authored-by: Tsvetomir Dimitrov <[email protected]>
Co-authored-by: Javier Viola <[email protected]>
Co-authored-by: eskimor <[email protected]>
Co-authored-by: command-bot <>

* On Demand - update weights and small nits (#7605)

* Remove collator restriction test in inclusion

On demand parachains won't have collator restrictions implemented in
this way but will instead use a preferred collator registered to a
`ParaId` in `paras_registrar`.

* Remove redundant config guard for test fns

* Update weights

* Update WeightInfo for on_demand assigner

* Unify assignment provider parameters into one call (#7606)

* Combine assignmentprovider params into one fn call

* Move scheduler_common to a module under scheduler

* Fix ttl handling in benchmark builder

* Run cargo format

* Remove obsolete test.

* Small improvement.

* Use same migration pattern as config module

* Remove old TODO

* Change log target name for assigner on demand

* Fix migration

* Fix clippy warnings

* Add HostConfiguration storage migration to V8

* Add `MigrateToV8` to unreleased migrations for all runtimes

* Fix storage version check for config v8

* Set `StorageVersion` to 8 in `MigrateToV8`

* Remove dups.

* Update primitives/src/v5/mod.rs

Co-authored-by: Bastian Köcher <[email protected]>

---------

Co-authored-by: alexgparity <[email protected]>
Co-authored-by: alexgparity <[email protected]>
Co-authored-by: antonva <[email protected]>
Co-authored-by: Tsvetomir Dimitrov <[email protected]>
Co-authored-by: Anton Vilhelm Ásgeirsson <[email protected]>
Co-authored-by: Javier Viola <[email protected]>
Co-authored-by: eskimor <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

* Use same rustfmt.toml as Substrate

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* format format file

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Format with new config

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add Substrate Clippy config

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Print Clippy version in CI

Otherwise its difficult to reproduce locally.

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Make fmt happy

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Update node/core/pvf/src/error.rs

Co-authored-by: Tsvetomir Dimitrov <[email protected]>

* Update node/core/pvf/src/error.rs

Co-authored-by: Tsvetomir Dimitrov <[email protected]>

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Tsvetomir Dimitrov <[email protected]>

* Runtime companion changes

* updates runtime configs

* Fixes runtime-test runtime configs

* Uses ElectionBounds and builder from own mod

* updates new bounds mod

* Fixes test-runtime mock

* update lockfile for {"substrate"}

---------

Co-authored-by: parity-processbot <>

* rename BEEFY `crypto` →`ecdsa_crypto`

* - bump up `BeefyApi` to version 3
- deal with `PeerId` error.

* update BEEFY dependency names for `fake-runtime` and `chain_spec`
revert Cargo.toml

* cargo fmt

* Use master Cargo.lock

* update lockfile for {"substrate"}

---------

Co-authored-by: Davide Galassi <[email protected]>
Co-authored-by: parity-processbot <>

* Companion for substrate#14471

* add missing MaxNominators constant

* missing MaxNominators in test-runtime

* missing MaxNominators in runtime/integration_tests

* Dont use deprecated functions

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Fixup

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Fix

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* update lockfile for {"substrate"}

* Update Substrate dep

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: parity-processbot <>

* create ManagerOrigin for HRMP

* missed one

* fix mock

* update GeneralAdmin docs

* replace Index for Nonce

* remove extra Nonce

* update lockfile for {"substrate"}

---------

Co-authored-by: parity-processbot <>

Moves `Block` to `frame_system` instead of `construct_runtime` and removes `Header` and `BlockNumber` (#7431)

* Companion for substrate

* Minor update

* Formatting

* Fixes for cumulus

* Fixes tests in polkadot-runtime-parachains

* Minor update

* Removes unused import

* Fixes tests in polkadot-runtime-common

* Minor fix

* Update roadmap/implementers-guide/src/runtime/configuration.md

Co-authored-by: ordian <[email protected]>

* ".git/.scripts/commands/fmt/fmt.sh"

* update lockfile for {"substrate"}

---------

Co-authored-by: ordian <[email protected]>
Co-authored-by: command-bot <>

* GenesisBuild<T,I> deprecated. BuildGenesisConfig added

* fmt

* fixes

* more fixes

* more fixes

* fixes

* update lockfile for {"substrate"}

* fix

---------

Co-authored-by: parity-processbot <>

* Move vstaging to production (and thus past session slashing).

WIP: test-runtime still needs to be fixed.

* Fix test-runtime.

---------

Co-authored-by: eskimor <[email protected]>

* Move XCM query functionality to trait

* Fix tests

* Add PayOverXcm implementation

* fix the PayOverXcm trait to compile

* moved doc comment out of trait implmeentation and to the trait

* PayOverXCM documentation

* Change documentation a bit

* Added empty benchmark methods implementation and changed docs

* update PayOverXCM to convert AccountIds to MultiLocations

* Implement benchmarking method

* Change v3 to latest

* Descend origin to an asset sender (#6970)

* descend origin to an asset sender

* sender as tuple of dest and sender

* Add more variants to the QueryResponseStatus enum

* Change Beneficiary to Into<[u8; 32]>

* update PayOverXcm to return concrete errors and use AccountId as sender

* use polkadot-primitives for AccountId

* fix dependency to use polkadot-core-primitives

* force Unpaid instruction to the top of the instructions list

* modify report_outcome to accept interior argument

* use new_query directly for building final xcm query, instead of report_outcome

* fix usage of new_query to use the XcmQueryHandler

* fix usage of new_query to use the XcmQueryHandler

* tiny method calling fix

* xcm query handler (#7198)

* drop redundant query status

* rename ReportQueryStatus to OuterQueryStatus

* revert rename of QueryResponseStatus

* update mapping

* Update xcm/xcm-builder/src/pay.rs

Co-authored-by: Gavin Wood <[email protected]>

* Updates

* Docs

* Fix benchmarking stuff

* Destination can be determined based on asset_kind

* Tweaking API to minimise clones

* Some repotting and docs

---------

Co-authored-by: Anthony Alaribe <[email protected]>
Co-authored-by: Muharem Ismailov <[email protected]>
Co-authored-by: Anthony Alaribe <[email protected]>
Co-authored-by: Gavin Wood <[email protected]>

* Companion: Substrate#13869

https://github.com/paritytech/substrate/pull/13869

* update lockfile for {"substrate"}

* ".git/.scripts/commands/fmt/fmt.sh"

---------

Co-authored-by: parity-processbot <>

* Add ProcessXcmMessage struct

* Migrate away from weights in host config

* New well-known key to report UMPQ capacity

* Add missing file

* Fixes

* Remove original UMP files

* Docs

* Update runtime/parachains/src/inclusion/mod.rs

Co-authored-by: asynchronous rob <[email protected]>

* Add benchmarking

* Benchmarks

* Mock example of using the QueueChangeHandler to update the WKK

* Use master Cargo.lock

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Merge remote-tracking branch 'origin/master' into gav-message-queue

* Update Cargo.lock

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Update remove-weight migration

The migration got touched on master; just resolving conflicts here.

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add message- to dispatch-origin conversion for XCM processing

Just using the `impl Into<MultiLocation>` was a bit inflexible.
Like this, the Relaychain can convert `UMP(para)` to a MultiLocation `para`.

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* DNM: Temporarily comment code since XCMv3 is not merged yet

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Use u64 for queue-wide limits on UmpAcceptanceCheckErr

Using u32 here was one audit finding for the queue pallet.

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Define one sub-queue per *MP queue

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Harden check_upward_messages

Using safe math and casts.

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add type-safe well_known_keys

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add message-queue weights

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Deploy MessageQueue to Polkadot

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Update Cargo.toml

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Migrate to parachain config V5

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Update UMP tests

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Cleanup

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* fmt

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Revert messed up merge 🤦



Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Update remove-weight migration

The migration got touched on master; just resolving conflicts here.

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add message- to dispatch-origin conversion for XCM processing

Just using the `impl Into<MultiLocation>` was a bit inflexible.
Like this, the Relaychain can convert `UMP(para)` to a MultiLocation `para`.

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* DNM: Temporarily comment code since XCMv3 is not merged yet

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Use u64 for queue-wide limits on UmpAcceptanceCheckErr

Using u32 here was one audit finding for the queue pallet.

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Define one sub-queue per *MP queue

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Harden check_upward_messages

Using safe math and casts.

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add type-safe well_known_keys

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add message-queue weights

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Deploy MessageQueue to Polkadot

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Update Cargo.toml

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Migrate to parachain config V5

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Update UMP tests

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Cleanup

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* fmt

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Make stuff compile

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Move DMP and HRMP messages to the MessageQueue

It currently does not compile in the CIbecause of some local
tweaks to Substrate.

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Diener for CI

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* diener update cargo.lock

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Cleanup

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Revert wrong changes

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Revert "DNM: Temporarily comment code since XCMv3 is not merged yet"

This reverts commit 820aa235cb21dd1d2621843607f7682bf035434e.

* Make compile

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Fixup runtimes

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* fmt

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Define benchmarks

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Cleanup

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Fix migration

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Use master Cargo.lock

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Lockfile

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Fix test

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add AggregateMessageOrigin

This enum currently only holds one value, but having it will make
it easier in the future to extend.

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Forbid UMP for off-boarding paras

- Reject candidates with UMP messages for off-boarding paras
- Forbid scheduling off-boarding when a para has unprocess UMPs

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Delete stupid test

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Use BoundedVec for upward messages

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add weights and fix MessageProcessor

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Bound receive_upward_messages and check bound in configuration pallet

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Bound Debug impl

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* fmt

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* clippy

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Fix test runtime

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Fix xcm-simulator

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Properly fix xcm-simulator and fuzzer

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Fix tests

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* fmt

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* cargo update -p sp-io

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Adapt to upstream Substrate changes

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Fix ProcesseMessage impls

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Some tests

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Use master Cargo.lock

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* cargo update -p sp-io

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Use new MQ API

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Fix test

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Fix migration

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Update Cargo.lock

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add UMP while Para offboarding tests

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* fmt

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Use Mocked message processor for benchmarking

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Use variables for constants

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add MQ pallet weights

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Use MQ pallet weights

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Configure QueueChangeHandler

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* fmt

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add config test

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Fix MQ serive weight

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Cleanup

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Cleanup outgoing UMP dispatch queues

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Use Master Cargo.lock

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Update Cargo.lock

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Weight mul is not const

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Clippy

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Remove merge marker

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Update runtime/parachains/src/inclusion/mod.rs

Co-authored-by: Gavin Wood <[email protected]>

* Update runtime/kusama/src/lib.rs

Co-authored-by: Gavin Wood <[email protected]>

* Use lowercase UMP

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Clarify comment

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Use Weight::from_parts

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Fix test

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Fix doc

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Emit event after the fact

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add defensive_proof to receive_upward_messages

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Reapply "Remove original UMP files"

Looks like they came back from the dead. Re-apply commit cf6d316f0

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Remove old files

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Rename MaxUmpMessageLen -> MaxUmpMessageLenOf

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Test defensive message dropping of receive_upward_messages

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Fixup imports

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Update implementors guide

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Fix tests

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Remove FAIL-CI mark

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Delete unused code

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add another test for MQ change hook

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Imports

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Keep Kusama runtime formatting

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Revert "Delete unused code"

This reverts commit dd76bca5025b7e1ef846a9539c3607eed185f16a.

* Feature gate mock functions

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Review: Use saturating_add

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Test RelayDispatchQueueSize storage key

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Move migration to own file to avoid merge conflicts

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Migration in own file

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Fixup migration

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Rococo: configure MQ pallet

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Fixup tests

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Revert "Rococo: configure MQ pallet"

Going to do this as follow up, since it needs Substrate changes
and i dont want to stall this MR any longer.

This reverts commit b9c15e8a8339c4e877d654ee3f09903af4210736.

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Revert "Fixup tests"

This reverts commit 88f1cbe20774d20e5e1e554e798960ae39437af1.

* Fixup migration

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Fix migration

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* fmt

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Fix CI

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Fix migration

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Fix other migration

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Bump MAX_CODE_SIZE to 10MiB

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add ForceUpdateUmpLimits migration

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* fmt

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* clippy

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* clippy

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* imports

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Use defensive instead of defensive_proof

'defensive_proof' also prints the 'self', which spams the console
too much when running the tests. Just the length is enough.

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Rename to ScheduleConfigUpdate

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Fixup migration checks

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add MAX_CODE_SIZE to ScheduleConfigUpdate

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Set MAX_CODE_SIZE to 4MiB

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Fix benchmark

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Fix formatting

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Revert "Add MAX_CODE_SIZE to ScheduleConfigUpdate"

This reverts commit 7caffb09e83083b57affd548215e45b25c3d64dc.

* Revert "Set MAX_CODE_SIZE to 4MiB"

This reverts commit 103ffbaf686487d2fbe0082a16826af17cacc1a1.

* Revert "Bump MAX_CODE_SIZE to 10MiB"

This reverts commit 530734b7b0da5b7680054e0242348fcc79a666fe.

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Remove consistency check from migration

Re-addig these checks is blocked on https://github.com/paritytech/polkadot/issues/7108



Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Fix constants

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Bump MAX_UPWARD_MESSAGE_SIZE_BOUND for Westend

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Fix migrations

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Use old nightly for fmt

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Fixes

* cargo fmt

* Fix tests

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Fix tests

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Fixes

* Add MQ pallet to fuzzer

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Fmt

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Fix XMC simulator example

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Remove runtime-benchmarks from fuzzers

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Revert "Remove runtime-benchmarks from fuzzers"

This reverts commit e1f2bb01b6dea2dd465539d3658719895b58b557.

* Fix example simulator

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add V6 migration and remove old ones

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Actually make old migrations reusable

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Dont delete old migrations

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Future proof AggregateMessageOrigin and review fixes

There are indications that Loopback and Bridged will be needed soon.

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* More cleanup

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* fmt

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* fix benchmarks

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Fix fuzzer build

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Review

Co-authored-by: muharem <[email protected]>

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Remove old migration

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Set MQ service weight to 20%

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Fix tabs in Markdown

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: asynchronous rob <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Keith Yeung <[email protected]>

* sudo benchmarks

* cargo fmt

* sub weights

* Update Cargo.lock

* NC.l

* undo

* cargo fmt

* update sudo weights

* update lockfile for {"substrate"}

---------

Co-authored-by: parity-processbot <>