Revert "pallet-xcm: Deprecate `execute` and `send` in favor of
`execute_blob` and `send_blob` (#3749)"

This reverts commit feee773d

.

---------

Co-authored-by: Adrian Catangiu <[email protected]>
Co-authored-by: Javier Bullrich <[email protected]>

This PR mainly removes `xcm::v3` stuff from `assets-common` to make it
more generic and facilitate the transition to newer XCM versions. Some
of the implementations here used hard-coded `xcm::v3::Location`, but now
it's up to the runtime to configure according to its needs.

Additional/consequent changes:
- `penpal` runtime uses now `xcm::latest::Location` for `pallet_assets`
as `AssetId`, because we don't care about migrations here
- it pretty much simplify xcm-emulator integration tests, where we don't
need now a lots of boilerplate conversions:
      ```
      v3::Location::try_from(...).expect("conversion works")`
      ```
- xcm-emulator tests
- split macro `impl_assets_helpers_for_parachain` to the
`impl_assets_helpers_for_parachain` and
`impl_foreign_assets_helpers_for_parachain` (avoids using hard-coded
`xcm::v3::Location`)

`execute` and `send` try to decode the xcm in the parameters before
reaching the filter line.
The new extrinsics decode only after the filter line.
These should be used instead of the old ones.

## TODO
- [x] Tests
- [x] Generate weights
- [x] Deprecation issue ->
https://github.com/paritytech/polkadot-sdk/issues/3771
- [x] PRDoc
- [x] Handle error in pallet-contracts

This would make writing XCMs in PJS Apps more difficult, but here's the
fix for that: https://github.com/polkadot-js/apps/pull/10350.
Already deployed! https://polkadot.js.org/apps/#/utilities/xcm

Supersedes https://github.com/paritytech/polkadot-sdk/pull/1798/



---------

Co-authored-by: PG Herveou <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Adrian Catangiu <[email protected]>

**Update:** Pushed additional changes based on the review comments.

**This pull request fixes various spelling mistakes in this
repository.**

Most of the changes are contained in the first **3** commits:

- `Fix spelling mistakes in comments and docs`

- `Fix spelling mistakes in test names`

- `Fix spelling mistakes in error messages, panic messages, logs and
tracing`

Other source code spelling mistakes are separated into individual
commits for easier reviewing:

- `Fix the spelling of 'authority'`

- `Fix the spelling of 'REASONABLE_HEADERS_IN_JUSTIFICATION_ANCESTRY'`

- `Fix the spelling of 'prev_enqueud_messages'`

- `Fix the spelling of 'endpoint'`

- `Fix the spelling of 'children'`

- `Fix the spelling of 'PenpalSiblingSovereignAccount'`

- `Fix the spelling of 'PenpalSudoAccount'`

- `Fix the spelling of 'insufficient'`

- `Fix the spelling of 'PalletXcmExtrinsicsBenchmark'`

- `Fix the spelling of 'subtracted'`

- `Fix the spelling of 'CandidatePendingAvailability'`

- `Fix the spelling of 'exclusive'`

- `Fix the spelling of 'until'`

- `Fix the spelling of 'discriminator'`

- `Fix the spelling of 'nonexistent'`

- `Fix the spelling of 'subsystem'`

- `Fix the spelling of 'indices'`

- `Fix the spelling of 'committed'`

- `Fix the spelling of 'topology'`

- `Fix the spelling of 'response'`

- `Fix the spelling of 'beneficiary'`

- `Fix the spelling of 'formatted'`

- `Fix the spelling of 'UNKNOWN_PROOF_REQUEST'`

- `Fix the spelling of 'succeeded'`

- `Fix the spelling of 'reopened'`

- `Fix the spelling of 'proposer'`

- `Fix the spelling of 'InstantiationNonce'`

- `Fix the spelling of 'depositor'`

- `Fix the spelling of 'expiration'`

- `Fix the spelling of 'phantom'`

- `Fix the spelling of 'AggregatedKeyValue'`

- `Fix the spelling of 'randomness'`

- `Fix the spelling of 'defendant'`

- `Fix the spelling of 'AquaticMammal'`

- `Fix the spelling of 'transactions'`

- `Fix the spelling of 'PassingTracingSubscriber'`

- `Fix the spelling of 'TxSignaturePayload'`

- `Fix the spelling of 'versioning'`

- `Fix the spelling of 'descendant'`

- `Fix the spelling of 'overridden'`

- `Fix the spelling of 'network'`

Let me know if this structure is adequate.

**Note:** The usage of the words `Merkle`, `Merkelize`, `Merklization`,
`Merkelization`, `Merkleization`, is somewhat inconsistent but I left it
as it is.

~~**Note:** In some places the term `Receival` is used to refer to
message reception, IMO `Reception` is the correct word here, but I left
it as it is.~~

~~**Note:** In some places the term `Overlayed` is used instead of the
more acceptable version `Overlaid` but I also left it as it is.~~

~~**Note:** In some places the term `Applyable` is used instead of the
correct version `Applicable` but I also left it as it is.~~

**Note:** Some usage of British vs American english e.g. `judgement` vs
`judgment`, `initialise` vs `initialize`, `optimise` vs `optimize` etc.
are both present in different places, but I suppose that's
understandable given the number of contributors.

~~**Note:** There is a spelling mistake in `.github/CODEOWNERS` but it
triggers errors in CI when I make changes to it, so I left it as it
is.~~

Issues addressed in this PR:
- Improve *Penpal* runtime:
- Properly handled received assets. Previously, it treated `(1, Here)`
as the local native currency, whereas it should be treated as a
`ForeignAsset`. This wasn't a great example of standard Parachain
behaviour, as no Parachain treats the system asset as the local
currency.
- Remove `AllowExplicitUnpaidExecutionFrom` the system. Again, this
wasn't a great example of standard Parachain behaviour.
- Move duplicated
`ForeignAssetFeeAsExistentialDepositMultiplierFeeCharger` to
`assets_common` crate.
- Improve emulated tests:
  - Update *Penpal* tests to new runtime.
- To simplify tests, register the reserve transferred, teleported, and
system assets in *Penpal* and *AssetHub* genesis. This saves us from
having to create the assets repeatedly for each test
- Add missing test case:
`reserve_transfer_assets_from_para_to_system_para`.
  - Cleanup.
- Prevent integration tests crates imports from being re-exported, as
they were polluting the `polkadot-sdk` docs.

There is still a test case missing for reserve transfers:
- Reserve transfer of system asset from *Parachain* to *Parachain*
trough *AssetHub*.
- This is not yet possible with `pallet-xcm` due to the reasons
explained in https://github.com/paritytech/polkadot-sdk/pull/3339

---------

Co-authored-by: command-bot <>

Signed-off-by: cuinix <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

# Note for reviewer

Most changes are just syntax changes necessary for the new version.
Most important files should be the ones under the `xcm` folder.

# Description 

Added XCMv4.

## Removed `Multi` prefix
The following types have been renamed:
- MultiLocation -> Location
- MultiAsset -> Asset
- MultiAssets -> Assets
- InteriorMultiLocation -> InteriorLocation
- MultiAssetFilter -> AssetFilter
- VersionedMultiAsset -> VersionedAsset
- WildMultiAsset -> WildAsset
- VersionedMultiLocation -> VersionedLocation

In order to fix a name conflict, the `Assets` in `xcm-executor` were
renamed to `HoldingAssets`, as they represent assets in holding.

## Removed `Abstract` asset id

It was not being used anywhere and this simplifies the code.

Now assets are just constructed as follows:

```rust
let asset: Asset = (AssetId(Location::new(1, Here)), 100u128).into();
```

No need for specifying `Concrete` anymore.

## Outcome is now a named fields struct

Instead of

```rust
pub enum Outcome {
  Complete(Weight),
  Incomplete(Weight, Error),
  Error(Error),
}
```

we now have

```rust
pub enum Outcome {
  Complete { used: Weight },
  Incomplete { used: Weight, error: Error },
  Error { error: Error },
}
```

## Added Reanchorable trait

Now both locations and assets implement this trait, making it easier to
reanchor both.

## New syntax for building locations and junctions

Now junctions are built using the following methods:

```rust
let location = Location {
    parents: 1,
    interior: [Parachain(1000), PalletInstance(50), GeneralIndex(1984)].into()
};
```

or

```rust
let location = Location::new(1, [Parachain(1000), PalletInstance(50), GeneralIndex(1984)]);
```

And they are matched like so:

```rust
match location.unpack() {
  (1, [Parachain(id)]) => ...
  (0, Here) => ...,
  (1, [_]) => ...,
}
```

This syntax is mandatory in v4, and has been also implemented for v2 and
v3 for easier migration.

This was needed to make all sizes smaller.

# TODO
- [x] Scaffold v4
- [x] Port github.com/paritytech/polkadot/pull/7236
- [x] Remove `Multi` prefix
- [x] Remove `Abstract` asset id

---------

Co-authored-by: command-bot <>
Co-authored-by: Keith Yeung <[email protected]>

Rococo and Westend runtimes for the "People Chain". This chain contains
the Identity pallet with plans to migrate all related data from the
Relay Chain.

Changes `IdentityInfo` to:

- Remove `additional_fields`.
- Add `github` and `discord` as first class fields. From scraping chain
data, these were the only two additional fields used (for the Fellowship
and Ambassador Program, respectively).
- Rename `riot` to `matrix`.

Note: This will use the script in
https://github.com/paritytech/polkadot-sdk/pull/2025 to generate the
genesis state.

TODO:

- [x] https://github.com/paritytech/polkadot-sdk/pull/1814 and
integration of the Identity Migrator pallet for migration.
- [x] Tests: https://github.com/paritytech/polkadot-sdk/pull/2373



---------

Co-authored-by: Muharem <[email protected]>
Co-authored-by: Michal Kucharczyk <[email protected]>
Co-authored-by: Dónal Murray <[email protected]>
Co-authored-by: Richard Melkonian <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>

## Summary

This pull request proposes a solution for improved control of the
versioned XCM flow over the bridge (across different consensus chains)
and resolves the situation where the sending chain/consensus has already
migrated to a higher XCM version than the receiving chain/consensus.

## Problem/Motivation

The current flow over the bridge involves a transfer from AssetHubRococo
(AHR) to BridgeHubRococo (BHR) to BridgeHubWestend (BHW) and finally to
AssetHubWestend (AHW), beginning with a reserve-backed transfer on AHR.

In this process:
1. AHR sends XCM `ExportMessage` through `XcmpQueue`, incorporating XCM
version checks using the `WrapVersion` feature, influenced by
`pallet_xcm::SupportedVersion` (managed by
`pallet_xcm::force_xcm_version` or version discovery).

2. BHR handles the `ExportMessage` instruction, utilizing the latest XCM
version. The `HaulBlobExporter` converts the inner XCM to
[`VersionedXcm::from`](https://github.com/paritytech/polkadot-sdk/blob/63ac2471aa0210f0ac9903bdd7d8f9351f9a635f/polkadot/xcm/xcm-builder/src/universal_exports.rs#L465-L467),
also using the latest XCM version.

However, challenges arise:
- Incompatibility when BHW uses a different version than BHR. For
instance, if BHR migrates to **XCMv4** while BHW remains on **XCMv3**,
BHR's `VersionedXcm::from` uses `VersionedXcm::V4` variant, causing
encoding issues for BHW.
  ```
	/// Just a simulation of possible error, which could happen on BHW
	/// (this code is based on actual master without XCMv4)
	let encoded = hex_literal::hex!("0400");
	println!("{:?}", VersionedXcm::<()>::decode(&mut &encoded[..]));

Err(Error { cause: None, desc: "Could not decode `VersionedXcm`, variant
doesn't exist" })
  ``` 
- Similar compatibility issues exist between AHR and AHW.

## Solution

This pull request introduces the following solutions:

1. **New trait `CheckVersion`** - added to the `xcm` module and exposing
`pallet_xcm::SupportedVersion`. This enhancement allows checking the
actual XCM version for desired destinations outside of the `pallet_xcm`
module.

2. **Version Check in `HaulBlobExporter`** uses `CheckVersion` to check
known/configured destination versions, ensuring compatibility. For
example, in the scenario mentioned, BHR can store the version `3` for
BHW. If BHR is on XCMv4, it will attempt to downgrade the message to
version `3` instead of using the latest version `4`.

3. **Version Check in `pallet-xcm-bridge-hub-router`** - this check
ensures compatibility with the real destination's XCM version,
preventing the unnecessary sending of messages to the local bridge hub
if versions are incompatible.

These additions aim to improve the control and compatibility of XCM
flows over the bridge and addressing issues related to version
mismatches.

## Possible alternative solution

_(More investigation is needed, and at the very least, it should extend
to XCMv4/5. If this proves to be a viable option, I can open an RFC for
XCM.)._

Add the `XcmVersion` attribute to the `ExportMessage` so that the
sending chain can determine, based on what is stored in
`pallet_xcm::SupportedVersion`, the version the destination is using.
This way, we may not need to handle the version in `HaulBlobExporter`.

```
ExportMessage {
	network: NetworkId,
	destination: InteriorMultiLocation,
	xcm: Xcm<()>
	destination_xcm_version: Version, // <- new attritbute
},
```

```
pub trait ExportXcm {
        fn validate(
		network: NetworkId,
		channel: u32,
		universal_source: &mut Option<InteriorMultiLocation>,
		destination: &mut Option<InteriorMultiLocation>,
		message: &mut Option<Xcm<()>>,
                destination_xcm_version: Version, , // <- new attritbute
	) -> SendResult<Self::Ticket>;
```

## Future Directions

This PR does not fix version discovery over bridge, further
investigation will be conducted here:
https://github.com/paritytech/polkadot-sdk/issues/2417.

## TODO

- [x] `pallet_xcm` mock for tests uses hard-coded XCM version `2` -
change to 3 or lastest?
- [x] fix `pallet-xcm-bridge-hub-router`
- [x] fix HaulBlobExporter with version determination
[here](https://github.com/paritytech/polkadot-sdk/blob/2183669d05f9b510f979a0cc3c7847707bacba2e/polkadot/xcm/xcm-builder/src/universal_exports.rs#L465)
- [x] add unit-tests to the runtimes
- [x] run benchmarks for `ExportMessage`
- [x] extend local run scripts about `force_xcm_version(dest, version)`
- [ ] when merged, prepare governance calls for Rococo/Westend
- [ ] add PRDoc

Part of: https://github.com/paritytech/parity-bridges-common/issues/2719

---------

Co-authored-by: command-bot <>

Just adds more tests.

- switch from Rococo<>Wococo to Rococo<>Westend bridge
- add bidirectional simple tests
- remove Wococo chains from xcm-emulator
- added tests for assets transfers over Rococo<>Westend bridge 

fixes https://github.com/paritytech/parity-bridges-common/issues/2405

## Motivation

`pallet-xcm` is the main user-facing interface for XCM functionality,
including assets manipulation functions like `teleportAssets()` and
`reserve_transfer_assets()` calls.

While `teleportAsset()` works both ways, `reserve_transfer_assets()`
works only for sending reserve-based assets to a remote destination and
beneficiary when the reserve is the _local chain_.

## Solution

This PR enhances `pallet_xcm::(limited_)reserve_withdraw_assets` to
support transfers when reserves are other chains.
This will allow complete, **bi-directional** reserve-based asset
transfers user stories using `pallet-xcm`.

Enables following scenarios:
- transferring assets with local reserve (was previously supported iff
asset used as fee also had local reserve - now it works in all cases),
- transferring assets with reserve on destination,
- transferring assets with reserve on remote/third-party chain (iff
assets and fees have same remote reserve),
- transferring assets with reserve different than the reserve of the
asset to be used as fees - meaning can be used to transfer random asset
with local/dest reserve while using DOT for fees on all involved chains,
even if DOT local/dest reserve doesn't match asset reserve,
- transferring assets with any type of local/dest reserve while using
fees which can be teleported between involved chains.

All of the above is done by pallet inner logic without the user having
to specify which scenario/reserves/teleports/etc. The correct scenario
and corresponding XCM programs are identified, and respectively, built
automatically based on runtime configuration of trusted teleporters and
trusted reserves.

#### Current limitations:
- while `fees` and "non-fee" `assets` CAN have different reserves (or
fees CAN be teleported), the remaining "non-fee" `assets` CANNOT, among
themselves, have different reserve locations (this is also implicitly
enforced by `MAX_ASSETS_FOR_TRANSFER=2`, but this can be safely
increased in the future).
- `fees` and "non-fee" `assets` CANNOT have **different remote**
reserves (this could also be supported in the future, but adds even more
complexity while possibly not being worth it - we'll see what the future
holds).

Fixes https://github.com/paritytech/polkadot-sdk/issues/1584
Fixes https://github.com/paritytech/polkadot-sdk/issues/2055



---------

Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Branislav Kontur <[email protected]>

Closes:
- #1383 
- Declared chains can be now be imported and reused in a different
crate.
- Chain declaration are now generic over a generic type `N` (the
Network)
- #1389
- Solved #1383, chains and networks declarations can be restructure to
avoid having to compile all chains when running integrations tests where
are not needed.
- Chains are now declared on its own crate (removed from
`integration-tests-common`)
- Networks are now declared on its own crate (removed from
`integration-tests-common`)
    - Integration tests will import only the relevant Network crate
- `integration-tests-common` is renamed to
`emulated-integration-tests-common`

All this is necessary to be able to implement what is described here:
https://github.com/paritytech/roadmap/issues/56#issuecomment-1777010553

---------

Co-authored-by: command-bot <>

(imported from https://github.com/paritytech/cumulus/pull/2157)

## Changes

This MR refactores the XCMP, Parachains System and DMP pallets to use
the [MessageQueue](https://github.com/paritytech/substrate/pull/12485)
for delayed execution of incoming messages. The DMP pallet is entirely
replaced by the MQ and thereby removed. This allows for PoV-bounded
execution and resolves a number of issues that stem from the current
work-around.

All System Parachains adopt this change.  
The most important changes are in `primitives/core/src/lib.rs`,
`parachains/common/src/process_xcm_message.rs`,
`pallets/parachain-system/src/lib.rs`, `pallets/xcmp-queue/src/lib.rs`
and the runtime configs.

### DMP Queue Pallet

The pallet got removed and its logic refactored into parachain-system.
Overweight message management can be done directly through the MQ
pallet.

Final undeployment migrations are provided by
`cumulus_pallet_dmp_queue::UndeployDmpQueue` and `DeleteDmpQueue` that
can be configured with an aux config trait like:

```rust
parameter_types! {
	pub const DmpQueuePalletName: &'static str = \"DmpQueue\" < CHANGE ME;
	pub const RelayOrigin: AggregateMessageOrigin = AggregateMessageOrigin::Parent;
}

impl cumulus_pallet_dmp_queue::MigrationConfig for Runtime {
	type PalletName = DmpQueuePalletName;
	type DmpHandler = frame_support::traits::EnqueueWithOrigin<MessageQueue, RelayOrigin>;
	type DbWeight = <Runtime as frame_system::Config>::DbWeight;
}

// And adding them to your Migrations tuple:
pub type Migrations = (
	...
	cumulus_pallet_dmp_queue::UndeployDmpQueue<Runtime>,
	cumulus_pallet_dmp_queue::DeleteDmpQueue<Runtime>,
);
```

### XCMP Queue pallet

Removed all dispatch queue functionality. Incoming XCMP messages are now
either: Immediately handled if they are Signals, enqueued into the MQ
pallet otherwise.

New config items for the XCMP queue pallet:
```rust
/// The actual queue implementation that retains the messages for later processing.
type XcmpQueue: EnqueueMessage<ParaId>;

/// How a XCM over HRMP from a sibling parachain should be processed.
type XcmpProcessor: ProcessMessage<Origin = ParaId>;

/// The maximal number of suspended XCMP channels at the same time.
#[pallet::constant]
type MaxInboundSuspended: Get<u32>;
```

How to configure those:

```rust
// Use the MessageQueue pallet to store messages for later processing. The `TransformOrigin` is needed since
// the MQ pallet itself operators on `AggregateMessageOrigin` but we want to enqueue `ParaId`s.
type XcmpQueue = TransformOrigin<MessageQueue, AggregateMessageOrigin, ParaId, ParaIdToSibling>;

// Process XCMP messages from siblings. This is type-safe to only accept `ParaId`s. They will be dispatched
// with origin `Junction::Sibling(…)`.
type XcmpProcessor = ProcessFromSibling<
	ProcessXcmMessage<
		AggregateMessageOrigin,
		xcm_executor::XcmExecutor<xcm_config::XcmConfig>,
		RuntimeCall,
	>,
>;

// Not really important what to choose here. Just something larger than the maximal number of channels.
type MaxInboundSuspended = sp_core::ConstU32<1_000>;
```

The `InboundXcmpStatus` storage item was replaced by
`InboundXcmpSuspended` since it now only tracks inbound queue suspension
and no message indices anymore.

Now only sends the most recent channel `Signals`, as all prio ones are
out-dated anyway.

### Parachain System pallet

For `DMP` messages instead of forwarding them to the `DMP` pallet, it
now pushes them to the configured `DmpQueue`. The message processing
which was triggered in `set_validation_data` is now being done by the MQ
pallet `on_initialize`.

XCMP messages are still handed off to the `XcmpMessageHandler`
(XCMP-Queue pallet) - no change here.

New config items for the parachain system pallet:
```rust
/// Queues inbound downward messages for delayed processing. 
///
/// Analogous to the `XcmpQueue` of the XCMP queue pallet.
type DmpQueue: EnqueueMessage<AggregateMessageOrigin>;
``` 

How to configure:
```rust
/// Use the MQ pallet to store DMP messages for delayed processing.
type DmpQueue = MessageQueue;
``` 

## Message Flow

The flow of messages on the parachain side. Messages come in from the
left via the `Validation Data` and finally end up at the `Xcm Executor`
on the right.

![Untitled
(1)](https://github.com/paritytech/cumulus/assets/10380170/6cf8b377-88c9-4aed-96df-baace266e04d)

## Further changes

- Bumped the default suspension, drop and resume thresholds in
`QueueConfigData::default()`.
- `XcmpQueue::{suspend_xcm_execution, resume_xcm_execution}` errors when
they would be a noop.
- Properly validate the `QueueConfigData` before setting it.
- Marked weight files as auto-generated so they wont auto-expand in the
MR files view.
- Move the `hypothetical` asserts to `frame_support` under the name
`experimental_hypothetically`

Questions:
- [ ] What about the ugly `#[cfg(feature = \"runtime-benchmarks\")]` in
the runtimes? Not sure how to best fix. Just having them like this makes
tests fail that rely on the real message processor when the feature is
enabled.
- [ ] Need a good weight for `MessageQueueServiceWeight`. The scheduler
already takes 80% so I put it to 10% but that is quite low.

TODO:
- [x] Remove c&p code after
https://github.com/paritytech/polkadot/pull/6271
- [x] Use `HandleMessage` once it is public in Substrate
- [x] fix `runtime-benchmarks` feature
https://github.com/paritytech/polkadot/pull/6966


- [x] Benchmarks
- [x] Tests
- [ ] Migrate `InboundXcmpStatus` to `InboundXcmpSuspended`
- [x] Possibly cleanup Migrations (DMP+XCMP)
- [x] optional: create `TransformProcessMessageOrigin` in Substrate and
replace `ProcessFromSibling`
- [ ] Rerun weights on ref HW

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: command-bot <>

# Desription

## Summary 

This PR introduces several nits and tweaks to xcm emulator tests for
system parachains.

## Explanation

**Deduplicate `XcmPallet::send(` with root origin code**
- Introduced `send_transact_to_parachain` which could be easily reuse
for scenarios like _governance call from relay chain to parachain_.

**Refactor `send_transact_sudo_from_relay_to_system_para_works`**
- Test covered just one use-case which was moved to the
`do_force_create_asset_from_relay_to_system_para`, so now we can extend
this test with more _governance-like_ senarios.
- Renamed to
`send_transact_as_superuser_from_relay_to_system_para_works`.

**Remove `send_transact_native_from_relay_to_system_para_fails` test**
- This test and/or description is kind of misleading, because system
paras support Native from relay chain by `RelayChainAsNative` with
correct xcm origin.
- It tested only sending on relay chain which should go directly to the
relay chain unit-tests (does not even need to be in xcm emulator level).

## Future directions

Check restructure parachains integration tests
[issue](https://github.com/paritytech/polkadot-sdk/issues/1389) and [PR
with more TODOs](https://github.com/paritytech/polkadot-sdk/pull/1693

).

---------

Co-authored-by: Ignacio Palacios <[email protected]>

[xcm] Use `Weight::MAX` for `reserve_asset_deposited`, `receive_teleported_asset` benchmarks (#1726)

# Description

## Summary

Previously, the `pallet_xcm::do_reserve_transfer_assets` and
`pallet_xcm::do_teleport_assets` functions relied on weight estimation
for remote chain execution, which was based on guesswork derived from
the local chain. This approach led to complications for runtimes that
did not provide or support specific [XCM
configurations](https://github.com/paritytech/polkadot-sdk/blob/7cbe0c76ef8fd2aabf9f07de0156941ce3ed44b0/polkadot/xcm/xcm-executor/src/config.rs#L43-L47)
for `IsReserve` or `IsTeleporter`. Consequently, such runtimes had to
resort to implementing hard-coded weights for XCM instructions like
`reserve_asset_deposited` or `receive_teleported_asset` to support
extrinsics such as `pallet_xcm::reserve_transfer_assets` and
`pallet_xcm::teleport_assets`, which depended on remote weight
estimation.

The issue of remote weight estimation was addressed and resolved by
[Pull Request
#1645](https://github.com/paritytech/polkadot-sdk/pull/1645), which
removed the need for remote weight estimation.

## Solution

As a continuation of this improvement, the current PR proposes further
cleanup by removing unnecessary hard-coded values and rectifying
benchmark results with `Weight::MAX` that previously used
`T::BlockWeights::get().max_block` as an override for unsupported XCM
instructions like `ReserveAssetDeposited` and `ReceiveTeleportedAsset`.


## Questions

- [x] Can we remove now also `Hardcoded till the XCM pallet is fixed`
for `deposit_asset`? E.g. for AssetHubKusama
[here](https://github.com/paritytech/polkadot-sdk/blob/7cbe0c76ef8fd2aabf9f07de0156941ce3ed44b0/cumulus/parachains/runtimes/assets/asset-hub-kusama/src/weights/xcm/mod.rs#L129-L134)
- [x] Are comments like
[this](https://github.com/paritytech/polkadot-sdk/blob/7cbe0c76ef8fd2aabf9f07de0156941ce3ed44b0/polkadot/runtime/kusama/src/weights/xcm/mod.rs#L94)
`// Kusama doesn't support ReserveAssetDeposited, so this benchmark has
a default weight` still relevant? Shouldnt be removed/changed?


## TODO

- [x] `bench bot` regenerate xcm weights for all runtimes
- [x] remove hard-coded stuff from system parachain weight files
- [ ] when merged, open `polkadot-fellow/runtimes` PR

## References

Fixes #1132
Closes #1132
Old polkadot repo [PR](https://github.com/paritytech/polkadot/pull/7546)

---------

Co-authored-by: command-bot <>

* add common libs

* asset hubs

* add westend

* bridge hubs

* collectives

* contracts

* emulated tests

* parachain bin

* delete collectives constants and update docs

* integration tests should have apache license (some missing, some needed changing)

* propagate features

* fmt

* improve hygiene & clean up

* improve hygiene & clean up - xcm-emulator

* improve hygiene & clean up - common

* improve hygiene & clean up - tests

* improve hygiene & clean up - tests 2

* last hygiene bits

* ".git/.scripts/commands/fmt/fmt.sh"

---------

Co-authored-by: command-bot <>

* Add missing Cumulus licenses

* Typo

* Add missing Substrate licenses

* Single job checking the sub-repos in steps

* Remove dates

* Remove dates

* Add missing (C)

* Update FRAME UI tests

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Update more UI tests

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

* Allow functions to work over both parachains and relay chains

* additional references

* import

* backup

* refactoring para and relay traits

* use runtime crates to build types

* decouple ProcessMessage

* decouple ProcessMessage 2

* dmp and xcmp handlers decouple

* backup

* refactor done

* common int values working

* added global ext with mutex

* works for two mutex

* single mutex and remove condvar

* global test ext done

* failing moving test_ext because relay block num

* relay_block_number issue fixed

* backup

* Test working with assertions

* assertions get Test as arg

* DispatchArgs as generic

* clean up

* backup

* teleports for asset-hub-kusama done

* improve assert_expected_events macro

* rename Test generics

* check assertions for tuples

* test assertions redone

* reserve_transfer_assets done

* send transact done

* hrmp test for paras

* hrmp channels test done

* hrmp channels test done 2

* before modifying test dispatch

* reserve tests done & Test dispatch fixed

* reserve transfer local asset

* force_create_and_mint_asset

* force create and mint done

* tests done

* fix imports in common

* common events refactored

* add option to events attributes

* asset-hub-polkadot tests done

* asset-hub-westend half done

* relay chain events move to common

* remove failing send tests for asset-hub-westend

* added events to bridge-hub-rococo

* added events to collectives-polkadot

* cargo clean up

* fix asset-hub-westend tests

* ".git/.scripts/commands/fmt/fmt.sh"

* fix clippy

* ".git/.scripts/commands/fmt/fmt.sh"

* Removed unnecessary deps

* Extracted some commonality for Kusama/Polkadot (which will be reused also for BridgeHubs) (#2971)

* Extracted some commonality for Kusama/Polkadot (which will be reused also for BridgeHubs)

* AssetHubRococo should better use AssetHubKusama runtime

* add fund_account

---------

Co-authored-by: NachoPal <[email protected]>

* address comments

* rename event assertion helpers

* clean comments

* address comments 2

* ".git/.scripts/commands/fmt/fmt.sh"

---------

Co-authored-by: Giles Cope <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Branislav Kontur <[email protected]>

* rename bridge hub + BridgeMessages type

* bridge base

* bridge string approach

* add decl_test_bridges macro

* outbound lanes on the way

* get & dispatch mock bridge done

* fix bridge errors + log::debug for messages

* clean up

* update source OutboundLaneData

* rococo & wococo added

* sender_receiver_accounts_parameter_types macro

* sender_receiver_accounts_parameter_types macro 2

* fixed multi parachain + example on the way

* working but router error

* bridge working

* refactor NetworkComponent

* make it generic

* working as generic

* clean up

* last bit

* ".git/.scripts/commands/fmt/fmt.sh"

* fix bridge hub handler name

* ".git/.scripts/commands/fmt/fmt.sh"

* add AssetConversion back for AssetHubWestend

* Update xcm/xcm-emulator/src/lib.rs

Co-authored-by: Squirrel <[email protected]>

* add LaneId wrapper

* update substrate

* fix wrapper conversion

* remove duplicate in workspace

* Revert "update substrate"

This reverts commit 92e8f201ae433aed3f70b998ebd4c23d9168d0ee.

* ".git/.scripts/commands/fmt/fmt.sh"

---------

Co-authored-by: command-bot <>
Co-authored-by: Squirrel <[email protected]>