Skip to content
  1. Oct 24, 2023
    • georgepisaltu's avatar
      Make `IdentityInfo` generic in `pallet-identity` (#1661) · 91851951
      georgepisaltu authored 
      Fixes #179 

# Description

This PR makes the structure containing identity information used in
`pallet-identity` generic through the pallet `Config`. Additionally, the
old structure is now available in a separate module called `simple`
(pending rename) and is compatible with the new interface.

Another change in this PR is that while the `additional` field in
`IdentityInfo` stays for backwards compatibility reasons, the associated
costs are stil present in the pallet through the `additional` function
in the `IdentityInformationProvider` interface. This function is marked
as deprecated as it is only a temporary solution to the backwards
compatibility problem we had. In short, we could have removed the
additional fields in the struct and done a migration, but we chose to
wait and do it off-chain through the genesis of the system parachain.
After we move the identity pallet to the parachain, additional fields
will be migrated into the existing fields and the `additional` key-value
store will be removed. Until that happens, this interface will provide
the necessary information to properly account for the associated costs.

Additionally, this PR fixes an unrelated issue; the `IdentityField` enum
used to represent the fields as bitflags couldn't store more than 8
fields, even though it was marked as `#[repr(u64)]`. This was because of
the `derive` implementation of `TypeInfo`, which assumed `u8` semantics.
The custom implementation of this trait in
https://github.com/paritytech/polkadot-sdk/commit/0105cc03


fixes the issue.

---------

Signed-off-by: default avatargeorgepisaltu <[email protected]>
Co-authored-by: default avatarSam Johnson <[email protected]>
Co-authored-by: default avatarjoe petrowski <[email protected]>
      91851951
    • Kian Paimani's avatar
      Ensure correct variant count in `Runtime[Hold/Freeze]Reason` (#1900) · 35eb133b
      Kian Paimani authored 
      

closes https://github.com/paritytech/polkadot-sdk/issues/1882

## Breaking Changes

This PR introduces a new item to `pallet_balances::Config`:

```diff
trait Config {
++    type RuntimeFreezeReasons;
}
```

This value is only used to check it against `type MaxFreeze`. A similar
check has been added for `MaxHolds` against `RuntimeHoldReasons`, which
is already given to `pallet_balances`.

In all contexts, you should pass the real `RuntimeFreezeReasons`
generated by `construct_runtime` to `type RuntimeFreezeReasons`. Passing
`()` would also work, but it would imply that the runtime uses no
freezes at all.

---------

Signed-off-by: default avatarOliver Tale-Yazdi <[email protected]>
Co-authored-by: default avatarOliver Tale-Yazdi <[email protected]>
      35eb133b
  3. Oct 20, 2023
    • Bastian Köcher's avatar
      `xcm`: Change `TypeInfo::path` to not include `staging` (#1948) · f3bf5c1a
      Bastian Köcher authored 
      

The `xcm` crate was renamed to `staging-xcm` to be able to publish it to
crates.io as someone as squatted `xcm`. The problem with this rename is
that the `TypeInfo` includes the crate name which ultimately lands in
the metadata. The metadata is consumed by downstream users like
`polkadot-js` or people building on top of `polkadot-js`. These people
are using the entire `path` to find the type in the type registry. Thus,
their code would break as the type path would now be [`staging_xcm`,
`VersionedXcm`] instead of [`xcm`, `VersionedXcm`]. This pull request
fixes this by renaming the path segment `staging_xcm` to `xcm`.

This requires: https://github.com/paritytech/scale-info/pull/197

---------

Co-authored-by: default avatarFrancisco Aguirre <[email protected]>
      f3bf5c1a
  5. Oct 16, 2023
    • Oliver Tale-Yazdi's avatar
      Workspace maintenance (#1884) · 9c1a2b38
      Oliver Tale-Yazdi authored 
      

Changes:
- Add missing crate to the workspace
- Remove versions from local dependency links

Maybe it is finally worth it to add this scrip to the CI to find these
things earlier:
[check-deps.py](https://github.com/ggwpez/substrate-scripts/blob/master/import-runtime-repos/check-deps.py).

@paritytech/ci what would be the best location for that check?  
It takes only a second to run, so maybe we can squeeze it into one of
the existing checks?
Otherwise creating a new GH workflow feels a bit wasteful... maybe i can
group it with https://github.com/paritytech/polkadot-sdk/pull/1831

---------

Signed-off-by: default avatarOliver Tale-Yazdi <[email protected]>
      9c1a2b38
  7. Oct 10, 2023
  9. Oct 09, 2023
    • David Emett's avatar
      Mixnet integration (#1346) · a808a3a0
      David Emett authored 
      

See #1345, <https://github.com/paritytech/substrate/pull/14207>.

This adds all the necessary mixnet components, and puts them together in
the "kitchen-sink" node/runtime. The components added are:

- A pallet (`frame/mixnet`). This is responsible for determining the
current mixnet session and phase, and the mixnodes to use in each
session. It provides a function that validators can call to register a
mixnode for the next session. The logic of this pallet is very similar
to that of the `im-online` pallet.
- A service (`client/mixnet`). This implements the core mixnet logic,
building on the `mixnet` crate. The service communicates with other
nodes using notifications sent over the "mixnet" protocol.
- An RPC interface. This currently only supports sending transactions
over the mixnet.

---------

Co-authored-by: default avatarDavid Emett <[email protected]>
Co-authored-by: default avatarJavier Viola <[email protected]>
      a808a3a0
  11. Oct 07, 2023
    • Muharem Ismailov's avatar
      Treasury spends various asset kinds (#1333) · cb944dc5
      Muharem Ismailov authored 
      

### Summary 

This PR introduces new dispatchables to the treasury pallet, allowing
spends of various asset types. The enhanced features of the treasury
pallet, in conjunction with the asset-rate pallet, are set up and
enabled for Westend and Rococo.

### Westend and Rococo runtimes.

Polkadot/Kusams/Rococo Treasury can accept proposals for `spends` of
various asset kinds by specifying the asset's location and ID.

#### Treasury Instance New Dispatchables:
- `spend(AssetKind, AssetBalance, Beneficiary, Option<ValidFrom>)` -
propose and approve a spend;
- `payout(SpendIndex)` - payout an approved spend or retry a failed
payout
- `check_payment(SpendIndex)` - check the status of a payout;
- `void_spend(SpendIndex)` - void previously approved spend;
> existing spend dispatchable renamed to spend_local

in this context, the `AssetKind` parameter contains the asset's location
and it's corresponding `asset_id`, for example:
`USDT` on `AssetHub`,
``` rust
location = MultiLocation(0, X1(Parachain(1000)))
asset_id = MultiLocation(0, X2(PalletInstance(50), GeneralIndex(1984)))
```

the `Beneficiary` parameter is a `MultiLocation` in the context of the
asset's location, for example
``` rust
// the Fellowship salary pallet's location / account
FellowshipSalaryPallet = MultiLocation(1, X2(Parachain(1001), PalletInstance(64)))
// or custom `AccountId`
Alice = MultiLocation(0, AccountId32(network: None, id: [1,...]))
```

the `AssetBalance` represents the amount of the `AssetKind` to be
transferred to the `Beneficiary`. For permission checks, the asset
amount is converted to the native amount and compared against the
maximum spendable amount determined by the commanding spend origin.

the `spend` dispatchable allows for batching spends with different
`ValidFrom` arguments, enabling milestone-based spending. If the
expectations tied to an approved spend are not met, it is possible to
void the spend later using the `void_spend` dispatchable.

Asset Rate Pallet provides the conversion rate from the `AssetKind` to
the native balance.

#### Asset Rate Instance Dispatchables:
- `create(AssetKind, Rate)` - initialize a conversion rate to the native
balance for the given asset
- `update(AssetKind, Rate)` - update the conversion rate to the native
balance for the given asset
- `remove(AssetKind)` - remove an existing conversion rate to the native
balance for the given asset

the pallet's dispatchables can be executed by the Root or Treasurer
origins.

### Treasury Pallet

Treasury Pallet can accept proposals for `spends` of various asset kinds
and pay them out through the implementation of the `Pay` trait.

New Dispatchables:
- `spend(Config::AssetKind, AssetBalance, Config::Beneficiary,
Option<ValidFrom>)` - propose and approve a spend;
- `payout(SpendIndex)` - payout an approved spend or retry a failed
payout;
- `check_payment(SpendIndex)` - check the status of a payout;
- `void_spend(SpendIndex)` - void previously approved spend;
> existing spend dispatchable renamed to spend_local

The parameters' types of the `spend` dispatchable exposed via the
pallet's `Config` and allows to propose and accept a spend of a certain
amount.

An approved spend can be claimed via the `payout` within the
`Config::SpendPeriod`. Clients provide an implementation of the `Pay`
trait which can pay an asset of the `AssetKind` to the `Beneficiary` in
`AssetBalance` units.

The implementation of the Pay trait might not have an immediate final
payment status, for example if implemented over `XCM` and the actual
transfer happens on a remote chain.

The `check_status` dispatchable can be executed to update the spend's
payment state and retry the `payout` if the payment has failed.

---------

Co-authored-by: default avatarjoe petrowski <[email protected]>
Co-authored-by: command-bot <>
      cb944dc5
  13. Oct 05, 2023
    • dependabot[bot]'s avatar
      Bump the known_good_semver group with 1 update (#1752) · 0c592329
      dependabot[bot] authored 
      

Bumps the known_good_semver group with 1 update:
[clap](https://github.com/clap-rs/clap).

<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/releases">clap's
releases</a>.</em></p>
<blockquote>
<h2>v4.4.6</h2>
<h2>[4.4.6] - 2023-09-28</h2>
<h3>Internal</h3>
<ul>
<li>Upgrade <code>anstream</code></li>
</ul>
<h2>v4.4.5</h2>
<h2>[4.4.5] - 2023-09-25</h2>
<h3>Fixes</h3>
<ul>
<li><em>(parser)</em> When inferring subcommand <code>name</code> or
<code>long_flag</code>, allow ambiguous-looking matches that
unambiguously map back to the same command</li>
<li><em>(parser)</em> When inferring subcommand <code>long_flag</code>,
don't panic</li>
<li><em>(assert)</em> Clarify what action is causing a positional that
doesn't set values which is especially useful for derive users</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.4.6] - 2023-09-28</h2>
<h3>Internal</h3>
<ul>
<li>Upgrade <code>anstream</code></li>
</ul>
<h2>[4.4.5] - 2023-09-25</h2>
<h3>Fixes</h3>
<ul>
<li><em>(parser)</em> When inferring subcommand <code>name</code> or
<code>long_flag</code>, allow ambiguous-looking matches that
unambiguously map back to the same command</li>
<li><em>(parser)</em> When inferring subcommand <code>long_flag</code>,
don't panic</li>
<li><em>(assert)</em> Clarify what action is causing a positional that
doesn't set values which is especially useful for derive users</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/39f5e807af1c08acedbf7343ce9ec379a4308636"><code>39f5e80</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/a5cb6bb988bbacb02e8cf98b6156c860d0801e08"><code>a5cb6bb</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/418c0017a654e9859adfa9b051815f20e4583e31"><code>418c001</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5146">#5146</a>
from epage/update</li>
<li><a
href="https://github.com/clap-rs/clap/commit/485b957c4b90aa010276f813dbd429e1071f8fd9"><code>485b957</code></a>
chore: Upgrade anstream</li>
<li><a
href="https://github.com/clap-rs/clap/commit/a1af8d9ad8f81eb2d71203b50c370a78ce3ec9f3"><code>a1af8d9</code></a>
chore: Update from '_rust/main'</li>
<li><a
href="https://github.com/clap-rs/clap/commit/ac51f0925003597dec21529538597dbd7872d1ac"><code>ac51f09</code></a>
chore(ci): Normalize json5 syntax</li>
<li><a
href="https://github.com/clap-rs/clap/commit/86c29dea384c7392a2b682fa0150f52c0f4c7f00"><code>86c29de</code></a>
chore(ci): Updaet Renovate schema</li>
<li><a
href="https://github.com/clap-rs/clap/commit/204552890d316ec9ae0b21f85298ba1d5d0786f8"><code>2045528</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/55d223001682bc668f5e4db91afd5e76c2a36597"><code>55d2230</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/492ee03b325ff98c7702295e024576b52b71358d"><code>492ee03</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5140">#5140</a>
from epage/dyn</li>
<li>Additional commits viewable in <a
href="https://github.com/clap-rs/clap/compare/v4.4.4...v4.4.6">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=clap&package-manager=cargo&previous-version=4.4.4&new-version=4.4.6)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: default avatardependabot[bot] <[email protected]>
Co-authored-by: default avatardependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
      0c592329
  15. Sep 29, 2023
    • Sebastian Kunert's avatar
      Point documentation links to monorepo (#1741) · 9485b0b4
      Sebastian Kunert authored
      9485b0b4
    • Ankan's avatar
      [NPoS] Fix for Reward Deficit in the pool (#1255) · f820dc0a
      Ankan authored 
      closes https://github.com/paritytech/polkadot-sdk/issues/158.
partially addresses
https://github.com/paritytech/polkadot-sdk/issues/226.

Instead of fragile calculation of current balance by looking at `free
balance - ED`, Nomination Pool now freezes ED in the pool reward account
to restrict an account from going below minimum balance. This also has a
nice side effect that if ED changes, we know how much is the imbalance
in ED frozen in the pool and the current required ED. A pool operator
can diligently top up the pool with the deficit in ED or vice versa,
withdraw the excess they transferred to the pool.

## Notable changes
- New call `adjust_pool_deposit`: Allows to top up the deficit or
withdraw the excess deposited funds to the pool.
- Uses Fungible trait (instead of Currency trait). Since NP was not
doing any locking/reserving previously, no migration is needed for this.
- One time migration of freezing ED from each of the existing pools (not
very PoV friendly but fine for relay chain).
      f820dc0a
  17. Sep 28, 2023
    • Xavier Lau's avatar
      Add `MaxTipAmount` for pallet-tips (#1709) · de71fecc
      Xavier Lau authored 
      Last week we experienced a governance attack.
Surprisingly, there was no upper limit on the tip amount.

Due to the mechanism of pallet-fragment-election, the council members
will be refreshed immediately. Attacker is easy to control the council
and give a large tip amount.
      de71fecc
  19. Sep 27, 2023
    • Michal Kucharczyk's avatar
      genesis-builder: implemented for all runtimes (#1492) · 5a2833cc
      Michal Kucharczyk authored 
      This PR implements [`GenesisBuilder`
API](https://github.com/paritytech/polkadot-sdk/blob/a414ea75

/substrate/primitives/genesis-builder/src/lib.rs#L38)
for all the runtimes in polkadot repo.

Step towards: paritytech/polkadot-sdk#25

---------

Co-authored-by: default avatarordian <[email protected]>
      5a2833cc
    • Michal Kucharczyk's avatar
      `BlockId` removal: `tx-pool` refactor (#1678) · ab3a3bc2
      Michal Kucharczyk authored 
      

It changes following APIs:
- trait `ChainApi`
-- `validate_transaction`

- trait `TransactionPool` 
--`submit_at`
--`submit_one`
--`submit_and_watch`

and some implementation details, in particular:
- impl `Pool` 
--`submit_at`
--`resubmit_at`
--`submit_one`
--`submit_and_watch`
--`prune_known`
--`prune`
--`prune_tags`
--`resolve_block_number`
--`verify`
--`verify_one`

- revalidation queue

All tests are also adjusted.

---------

Co-authored-by: command-bot <>
Co-authored-by: default avatarBastian Köcher <[email protected]>
      ab3a3bc2
  21. Sep 20, 2023
    • dependabot[bot]'s avatar
      Bump the known_good_semver group with 2 updates (#1620) · 1517eb8d
      dependabot[bot] authored 
      [//]: # (dependabot-start)
⚠️  **Dependabot is rebasing this PR** ⚠

️ 

Rebasing might not happen immediately, so don't worry if this takes some
time.

Note: if you make any changes to this PR yourself, they will take
precedence over the rebase.

---

[//]: # (dependabot-end)

Bumps the known_good_semver group with 2 updates:
[clap](https://github.com/clap-rs/clap) and
[syn](https://github.com/dtolnay/syn).

Updates `clap` from 4.4.3 to 4.4.4
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/releases">clap's
releases</a>.</em></p>
<blockquote>
<h2>v4.4.4</h2>
<h2>[4.4.4] - 2023-09-18</h2>
<h3>Internal</h3>
<ul>
<li>Update <code>terminal_size</code> to 0.3</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.4.4] - 2023-09-18</h2>
<h3>Internal</h3>
<ul>
<li>Update <code>terminal_size</code> to 0.3</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/e6e539660f36487e3521ab6835ef1381a21785a4"><code>e6e5396</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/acbb60c11389d362e3b2d23a7b2a0a0523bd2fa8"><code>acbb60c</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/f09d521450c50f56153f7246489666c71e3b4739"><code>f09d521</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5129">#5129</a>
from cgwalters/widen-terminal-size</li>
<li><a
href="https://github.com/clap-rs/clap/commit/84f99ff979d58e3fe94716144b1800fd81723ed7"><code>84f99ff</code></a>
chore(builder): Bump terminal_size to 0.3</li>
<li><a
href="https://github.com/clap-rs/clap/commit/7f8df272d90afde89e40de086492e1c9f5749897"><code>7f8df27</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5124">#5124</a>
from devinherron/master</li>
<li><a
href="https://github.com/clap-rs/clap/commit/4dff87386a950d8dfa8e89906e9bf54d180d13de"><code>4dff873</code></a>
fix(doc): Fix typo in 03_04_subcommands.md</li>
<li>See full diff in <a
href="https://github.com/clap-rs/clap/compare/v4.4.3...v4.4.4">compare
view</a></li>
</ul>
</details>
<br />

Updates `syn` from 2.0.36 to 2.0.37
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/syn/releases">syn's
releases</a>.</em></p>
<blockquote>
<h2>2.0.37</h2>
<ul>
<li>Work around incorrect future compatibility warning in rustc
1.74.0-nightly</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/syn/commit/96810880f3acbb63415cf4684ab42c82edc31e2a"><code>9681088</code></a>
Release 2.0.37</li>
<li><a
href="https://github.com/dtolnay/syn/commit/fbe3bc2ddcee4192f95697a953330d031030f5a1"><code>fbe3bc2</code></a>
Work around unknown_lints warning on rustc older than 1.64</li>
<li><a
href="https://github.com/dtolnay/syn/commit/75cf912e061ef5a1d97c003f4988f43d7639f5a8"><code>75cf912</code></a>
Ignore more repr_transparent_external_private_fields</li>
<li><a
href="https://github.com/dtolnay/syn/commit/299c782439823b868de4aea3682b41d03351d978"><code>299c782</code></a>
Ignore false repr_transparent_external_private_fields FCW in generated
code</li>
<li>See full diff in <a
href="https://github.com/dtolnay/syn/compare/2.0.36...2.0.37">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: default avatardependabot[bot] <[email protected]>
Co-authored-by: default avatardependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
      1517eb8d
  23. Sep 18, 2023
    • Gonçalo Pestana's avatar
      Implements a variable deposit base calculation for EPM signed submissions (#1547) · 614aa31b
      Gonçalo Pestana authored 
      **Note**: This is a lift-and-shift PR from the old substrate and
polkadot repos, both PRs have been reviewed and audited
(https://github.com/paritytech/substrate/pull/13983,
https://github.com/paritytech/polkadot/pull/7140)

---

This PR implements a generic `BaseDeposit` calculation for signed
submissions, based on the size of the submission queue.

It adds a new associated type to EPM's config, `type SignedDepositBase`,
that implements `Convert<usize, BalanceOf<T>>`, which is used to
calculate the base deposit for signed submissions based on the size of
the signed submissions queue.

`struct GeometricDepositBase<Balance, Fixed, Inc>` implements the
convert trait so that the deposit value increases as a geometric
progression. The deposit base is calculated by `deposit_base =
fixed_deposit_base * (1 + increase_factor)^n`, where `n` is the term of
the progression (i.e. the number of signed submissions in the queue).
`Fixed` and `Inc` generic params are getters for `Balance` and
`IncreaseFactor` to compute the geometric progression. If
`IncreaseFactor = 0`, then the signed deposit is constant and equal to
`Fixed` regardless of the size of the queue.

### Runtime configs

In Kusama, the progression with 10% increase without changing the
current signed fixed deposit is: (term == size of the queue)

Term 1: `1,333,333,332,000`
Term 2: `1,333,333,332,000 * 1.10 = 1,466,666,665,200`
Term 3: `1,333,333,332,000 * 1.10^2 = 1,613,333,331,200`
Term 4: `1,333,333,332,000 * 1.10^3 = 1,774,666,664,320`
Term 5: `1,333,333,332,000 * 1.10^4 = 1,952,133,330,752`
Term 6: `1,333,333,332,000 * 1.10^5 = 2,147,346,663,827.20`
Term 7: `1,333,333,332,000 * 1.10^6 = 2,362,081,330,210.92`
Term 8: `1,333,333,332,000 * 1.10^7 = 2,598,289,463,231.01`
Term 9: `1,333,333,332,000 * 1.10^8 = 2,858,118,409,554.11`
Term 10: `1,333,333,332,000 * 1.10^9 = 3,143,930,250,509.52`

Westend:

Term 1: `2,000,000,000,000`
Term 2: `2,000,000,000,000 * 1.10 = 2,200,000,000,000`
Term 3: `2,000,000,000,000 * 1.10^2 = 2,420,000,000,000`
Term 4: `2,000,000,000,000 * 1.10^3 = 2,662,000,000,000`
Term 5: `2,000,000,000,000 * 1.10^4 = 2,928,200,000,000`
Term 6: `2,000,000,000,000 * 1.10^5 = 3,221,020,000,000`
Term 7: `2,000,000,000,000 * 1.10^6 = 3,543,122,000,000`
Term 8: `2,000,000,000,000 * 1.10^7 = 3,897,434,200,000`
Term 9: `2,000,000,000,000 * 1.10^8 = 4,287,177,620,000`
Term 10: `2,000,000,000,000 * 1.10^9 = 4,715,895,382,000`

and in Polkadot, the deposit increase is disabled in the current state
of the PR, as the increase factor is 0% -- so nothing changes from the
current behaviour.

Closes https://github.com/paritytech-secops/srlabs_findings/issues/189
      614aa31b
  25. Sep 17, 2023
  27. Sep 15, 2023
    • dependabot[bot]'s avatar
      Bump the known_good_semver group with 2 updates (#1553) · 1882e9e4
      dependabot[bot] authored 
      

Bumps the known_good_semver group with 2 updates:
[serde_json](https://github.com/serde-rs/json) and
[syn](https://github.com/dtolnay/syn).

Updates `serde_json` from 1.0.106 to 1.0.107
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/json/releases">serde_json's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.107</h2>
<ul>
<li>impl IntoDeserializer for &amp;RawValue (<a
href="https://redirect.github.com/serde-rs/json/issues/1071">#1071</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/json/commit/b6e113f2036c52e994ca805e530ee4ffae791f71"><code>b6e113f</code></a>
Release 1.0.107</li>
<li><a
href="https://github.com/serde-rs/json/commit/00626a0a95b3d4cee8d57709f0acc804c1296716"><code>00626a0</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1073">#1073</a>
from dtolnay/rawvalue</li>
<li><a
href="https://github.com/serde-rs/json/commit/b9d296f87d6081afdd590d5a6006737db961302b"><code>b9d296f</code></a>
IntoDeserializer for &amp;RawValue</li>
<li><a
href="https://github.com/serde-rs/json/commit/4ea34a2566ba82a2e602526d0919d23e88c9e5ef"><code>4ea34a2</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1072">#1072</a>
from dtolnay/rawvalue</li>
<li><a
href="https://github.com/serde-rs/json/commit/fe30766ae5c79bfb670b2de1c5596e6e11e22f8c"><code>fe30766</code></a>
Support deserializing from &amp;RawValue</li>
<li><a
href="https://github.com/serde-rs/json/commit/2c22077f0e2decfda5cdfd5821c5f9547d584b76"><code>2c22077</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/json/issues/1062">#1062</a>
from osiewicz/remove_build_rs</li>
<li><a
href="https://github.com/serde-rs/json/commit/04f7758b6eae935237574b25a1e63cf5e281e19e"><code>04f7758</code></a>
fixup! chore: Remove no_btreemap_get_key_value and
no_btreemap_remove_entry.</li>
<li><a
href="https://github.com/serde-rs/json/commit/83bdc5fd4213d94201a3d9ad0f2943da7eba1dd6"><code>83bdc5f</code></a>
Omit return keyword in <code>remove_entry</code></li>
<li><a
href="https://github.com/serde-rs/json/commit/89a274195680d3ea6a2b442ff633b81ccf60bbe4"><code>89a2741</code></a>
Revert &quot;Remove limb_width32 and limb_width64 features&quot;</li>
<li><a
href="https://github.com/serde-rs/json/commit/16e04ceeddfdfad18fb1ae8530695a318fa9bc02"><code>16e04ce</code></a>
fixup! Remove limb_width32 and limb_width64 features</li>
<li>See full diff in <a
href="https://github.com/serde-rs/json/compare/v1.0.106...v1.0.107">compare
view</a></li>
</ul>
</details>
<br />

Updates `syn` from 2.0.32 to 2.0.33
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/syn/releases">syn's
releases</a>.</em></p>
<blockquote>
<h2>2.0.33</h2>
<ul>
<li>Special handling for the <code>(/*ERROR*/)</code> placeholder that
rustc uses for macros that fail to expand</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/syn/commit/5e3f55e684b7e33424b9f551105463418b196eb4"><code>5e3f55e</code></a>
Release 2.0.33</li>
<li><a
href="https://github.com/dtolnay/syn/commit/3e04809f5218c6d5fb2b09a6c55933e785825c75"><code>3e04809</code></a>
Pull in proc-macro2 error placeholder change</li>
<li><a
href="https://github.com/dtolnay/syn/commit/2cd5608a4c37810bb0947b0c161a20695b3ce487"><code>2cd5608</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1508">#1508</a>
from dtolnay/error</li>
<li><a
href="https://github.com/dtolnay/syn/commit/84cfe09484f6468bc85fb01db11c6a10fcb2d988"><code>84cfe09</code></a>
Fall through to 'Unrecognized literal' error</li>
<li><a
href="https://github.com/dtolnay/syn/commit/a80570c81bf15c9afcf8e2470ab06f60f7a8183d"><code>a80570c</code></a>
Parse rustc's representation of macro expansion error</li>
<li>See full diff in <a
href="https://github.com/dtolnay/syn/compare/2.0.32...2.0.33">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: default avatardependabot[bot] <[email protected]>
Co-authored-by: default avatardependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
      1882e9e4
    • Rahul Subramaniyam's avatar
      Modular block request handler (#1524) · b35b28ca
      Rahul Subramaniyam authored 
      

Submit the outstanding PRs from the old repos(these were already
reviewed and approved before the repo rorg, but not yet submitted):
Main PR: https://github.com/paritytech/substrate/pull/14014
Companion PRs: https://github.com/paritytech/polkadot/pull/7134,
https://github.com/paritytech/cumulus/pull/2489

The changes in the PR:
1. ChainSync currently calls into the block request handler directly.
Instead, move the block request handler behind a trait. This allows new
protocols to be plugged into ChainSync.
2. BuildNetworkParams is changed so that custom relay protocol
implementations can be (optionally) passed in during network creation
time. If custom protocol is not specified, it defaults to the existing
block handler
3. BlockServer and BlockDownloader traits are introduced for the
protocol implementation. The existing block handler has been changed to
implement these traits
4. Other changes:
[X] Make TxHash serializable. This is needed for exchanging the
serialized hash in the relay protocol messages
[X] Clean up types no longer used(OpaqueBlockRequest,
OpaqueBlockResponse)

---------

Co-authored-by: default avatarDmitry Markin <[email protected]>
Co-authored-by: command-bot <>
      b35b28ca
  29. Sep 13, 2023
    • dependabot[bot]'s avatar
      Bump the known_good_semver group with 1 update (#1530) · 71630dfb
      dependabot[bot] authored 
      

Bumps the known_good_semver group with 1 update:
[clap](https://github.com/clap-rs/clap).

<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/releases">clap's
releases</a>.</em></p>
<blockquote>
<h2>v4.4.3</h2>
<h2>[4.4.3] - 2023-09-12</h2>
<h3>Documentation</h3>
<ul>
<li><em>(derive)</em> Clarify use of attributes within the tutorial</li>
<li>Split sections in the builder and derive tutorials into separate
modules</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.4.3] - 2023-09-12</h2>
<h3>Documentation</h3>
<ul>
<li><em>(derive)</em> Clarify use of attributes within the tutorial</li>
<li>Split sections in the builder and derive tutorials into separate
modules</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/e9668b364c5a0d259780a3e6d8352203d6f329f5"><code>e9668b3</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/bc4986e01e4a6c817e4af8dbd91f96c6aae97107"><code>bc4986e</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/3d53641ca1696fdeafb8e1e87def6b27f1a7d79d"><code>3d53641</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5122">#5122</a>
from epage/docs</li>
<li><a
href="https://github.com/clap-rs/clap/commit/32586c7b6335f437e6f01a089e7664f9c88ddc09"><code>32586c7</code></a>
docs(tutorial): Split into separate modules per section</li>
<li><a
href="https://github.com/clap-rs/clap/commit/5f6d4a3dadd436899923f27ea6ac62b26198ad91"><code>5f6d4a3</code></a>
docs(tutorial): Split out into a module</li>
<li><a
href="https://github.com/clap-rs/clap/commit/20987de0bd2b9b2720771b0f0572745d2ee91433"><code>20987de</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5121">#5121</a>
from epage/docs</li>
<li><a
href="https://github.com/clap-rs/clap/commit/9e7404b5996128efcf4d6098b7d4af4eacb04fca"><code>9e7404b</code></a>
docs(tutorial): Attempt to clarify attributes</li>
<li><a
href="https://github.com/clap-rs/clap/commit/db97a2c5be69fa81af80e9cee5d3943bcfc664c4"><code>db97a2c</code></a>
docs(derive): Clarify value attributes are for PossibleValue</li>
<li><a
href="https://github.com/clap-rs/clap/commit/37ba6075a9e3c968a196e73e78e95a1e7c6e9326"><code>37ba607</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/3234c74a886fdb14abc94b34413d8604d2da0e93"><code>3234c74</code></a>
docs: Update changelog</li>
<li>Additional commits viewable in <a
href="https://github.com/clap-rs/clap/compare/v4.4.2...v4.4.3">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=clap&package-manager=cargo&previous-version=4.4.2&new-version=4.4.3)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: default avatardependabot[bot] <[email protected]>
Co-authored-by: default avatardependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
      71630dfb
  31. Sep 11, 2023
    • dependabot[bot]'s avatar
      Bump the known_good_semver group with 2 updates (#1485) · 056c4221
      dependabot[bot] authored 
      

Bumps the known_good_semver group with 2 updates: [serde_json](https://github.com/serde-rs/json) and [syn](https://github.com/dtolnay/syn).


Updates `serde_json` from 1.0.105 to 1.0.106
- [Release notes](https://github.com/serde-rs/json/releases)
- [Commits](https://github.com/serde-rs/json/compare/v1.0.105...v1.0.106)

Updates `syn` from 2.0.31 to 2.0.32
- [Release notes](https://github.com/dtolnay/syn/releases)
- [Commits](https://github.com/dtolnay/syn/compare/2.0.31...2.0.32)

---
updated-dependencies:
- dependency-name: serde_json
  dependency-type: direct:production
  update-type: version-update:semver-patch
  dependency-group: known_good_semver
- dependency-name: syn
  dependency-type: direct:production
  update-type: version-update:semver-patch
  dependency-group: known_good_semver
...

Signed-off-by: default avatardependabot[bot] <[email protected]>
Co-authored-by: default avatardependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
      056c4221
  33. Sep 05, 2023
  35. Sep 04, 2023
  37. Sep 03, 2023
  39. Sep 01, 2023
  41. Aug 30, 2023
  43. Aug 29, 2023
  45. Aug 25, 2023
  47. Aug 24, 2023
    • Gavin Wood's avatar
      Frame: Agile Coretime Broker pallet (RFC-1) (#14568) · 46bd466e
      Gavin Wood authored 
      

* Add Broker pallet

* Flesh out CorePart

* Repotting and fleshing out

* more drafting

* process timeslice

* Test Fungibles completed

* Auctions

* Price morphing

* First tests

* Tidying up config/status

* Docs

* Timeslice todying

* More Timeslice tidying

* Tests]

* Repotting.

* Tests

* Tests

* System InstaPool cores and payout

* Better Relay Test framework

* Tests and instapool fixes

* Support NFT interface

* Proper renewals

* Better events, results

* Test transfer

* Renewal test

* Repot some impls and make dispatchables.

* Better weight

* Test migration

* Document events

* Introduce durations

* Core count

* Allow reassignment

* Better naming

* Error docs

* Docs

* Formatting

* Advance notice period is in RC blocks, not timeslices

* Docs

* Formatting

* Docs

* Missing file

* Added some events

* Events for all dispatchables

* Remove benchmark

* Fix

* Adds benchmark for configure and some basic setup

* Adds benchmark for reserve and unreserve

* Adds a couple of more benchmarks

* Docs

* Event

* Fix

* Adds benchmark for purchase

* Dedup

* Add some weight breakdowns

* Repotting

* Adds more benchmarks

* Renaming and one more event

* Sale event

* Better price API and docs

* Avoid possibility of clobbering renewal record

* Avoid possibility of clobbering renewal record

* Fixes a few benchmarks

* Another test

* More tests

* Drop history test

* Rename and CORE_MASK_BITS constant

* Update frame/broker/src/dispatchable_impls.rs

Co-authored-by: default avatarOliver Tale-Yazdi <[email protected]>

* Update frame/broker/src/dispatchable_impls.rs

Co-authored-by: default avatarOliver Tale-Yazdi <[email protected]>

* Update frame/broker/src/dispatchable_impls.rs

Co-authored-by: default avatarOliver Tale-Yazdi <[email protected]>

* Update frame/broker/src/utility_impls.rs

Co-authored-by: default avatarOliver Tale-Yazdi <[email protected]>

* Update frame/broker/src/dispatchable_impls.rs

Co-authored-by: default avatarOliver Tale-Yazdi <[email protected]>

* Update frame/broker/src/mock.rs

Co-authored-by: default avatarOliver Tale-Yazdi <[email protected]>

* Addresses few review comments

* Addresses few review comments

* Addresses few review comments

* Merge

* Merge

* ".git/.scripts/commands/fmt/fmt.sh"

* Integrates broker in kitchensink

* Minor update

* Fixes typo

* Moves balance back to u64

* Fixes kitchensink build

* Fixes worst case for assign

* Adds benchmark for process_core_count

* Adds a couple of more benchmarks

* Adds an assert for partition

* Uses max_timeslices as input in claim_revenue benchmark

* Adds benchmark for drop_renewal

* Adds benchmark for process_core_schedule

* Adds benchmark for process_pool

* Adds assertion for transfer

* Fixes benchmark for broker in kitchensink

* Adds todo for process_revenue benchmark

* Minor update

* Fix for pool revenue history

* remove TODOs

* Fix tests

* Document CoretimeInterface

* rename part to mask

* Fixes

* Grumble

* ".git/.scripts/commands/bench/bench.sh" --subcommand=pallet --runtime=dev --target_dir=substrate --pallet=pallet_broker

* Adds benchmark for drop_history and fixes worst case for claim_revenue

* Adds drop_history in WeightInfo

* ".git/.scripts/commands/bench/bench.sh" --subcommand=pallet --runtime=dev --target_dir=substrate --pallet=pallet_broker

* Minor fix for Quick Benchmark CI

* Fixes

* Docs

* Headers

* Expose a couple of APIs for benchmarking (#14688)

* Expose a couple of APIs for benchmarking

* Adds doc

* Minor fix in CoretimeInterface impl for kitchensik

* Minor

* Cap renewal price

* Adds a few tests

* Adds more tests

* Minor updates

* Adds a test for an edge case

* Fixes feature propagation

* Fixes feature propagation

* Adds doc fix

* Syntax nits

Signed-off-by: default avatarOliver Tale-Yazdi <[email protected]>

* Reuse Bit assign functions

Signed-off-by: default avatarOliver Tale-Yazdi <[email protected]>

* Bitwise tests

Signed-off-by: default avatarOliver Tale-Yazdi <[email protected]>

* adapt_price: Edge case for sold == target

Signed-off-by: default avatarOliver Tale-Yazdi <[email protected]>

* Add sanity checking to ConfigRecord

Signed-off-by: default avatarOliver Tale-Yazdi <[email protected]>

* Add deny(missing_docs) where possible

Signed-off-by: default avatarOliver Tale-Yazdi <[email protected]>

* partition: forbid pivot_offset == 0

Signed-off-by: default avatarOliver Tale-Yazdi <[email protected]>

* Sort features

zepter format features

Signed-off-by: default avatarOliver Tale-Yazdi <[email protected]>

* Import Zero from new location

Signed-off-by: default avatarOliver Tale-Yazdi <[email protected]>

* Clippy: remove redundant clone

Signed-off-by: default avatarOliver Tale-Yazdi <[email protected]>

* try to fix build

Signed-off-by: default avatarOliver Tale-Yazdi <[email protected]>

* Fix CI

Signed-off-by: default avatarOliver Tale-Yazdi <[email protected]>

---------

Signed-off-by: default avatarOliver Tale-Yazdi <[email protected]>
Co-authored-by: default avatarNikhil Gupta <[email protected]>
Co-authored-by: default avatarOliver Tale-Yazdi <[email protected]>
Co-authored-by: command-bot <>
      46bd466e
    • juangirini's avatar
      Restructure `frame_benchmarking` macro related exports (#14787) · bc2b3d9d
      juangirini authored 
      

* make reexports private

* make reexports private 2

* make reexports private for runtime-benchmarking

* make reexports private for try-runtime

* fix for try-runtime

* make reexports private for tests

* fmt

* make reexports private for tests

* make reexports private for experimental

* fix beefy

* fix ui test

* fix ui test

* fix benches

* ".git/.scripts/commands/fmt/fmt.sh"

* fix contracts use

* wip

* wip

* do not reexport sp_api::metadata_ir

* fix CI checks

* fix support tests

* ".git/.scripts/commands/fmt/fmt.sh"

* Update frame/support/src/lib.rs

Co-authored-by: default avatarBastian Köcher <[email protected]>

* import codec directly

* fmt

* wip

* wip

* remove benchmarking private exports

* fix zepter warning

* fix imports

* partially fix node-cli tests

* fix node-cli tests

* fix node-cli build

* fix zepter warning

* fix test

* fix ui test

* fix ci

* remove unnecessary imports

* add import back

* add import back

---------

Co-authored-by: command-bot <>
Co-authored-by: default avatarBastian Köcher <[email protected]>
      bc2b3d9d
    • PG Herveou's avatar
      Contracts: Update Config::Debug (#14789) · cd464f9c
      PG Herveou authored 
      * Update Debug trait

* Rename

* tweak

* fmt

* Better namings

* rm unsafe-debug

* rework doc

* nit

* fix comment

* clippy

* update naming

* Rename file

* fmt fixes

* rename

* Move tracing behind umbrella Debugging trait

* fix

* fix comment

* reorder imports

* comment

* update doc

* add missing doc

* add missing doc

* Update Debugging -> Debugger

* Update bin/node/runtime/Cargo.toml
      cd464f9c
  49. Aug 23, 2023
  51. Aug 17, 2023
  53. Aug 15, 2023
  55. Aug 14, 2023
  57. Aug 11, 2023