Skip to content
  1. Nov 10, 2023
  3. Nov 08, 2023
  5. Nov 06, 2023
  7. Nov 05, 2023
  9. Nov 03, 2023
    • georgepisaltu's avatar
      Identity pallet improvements (#2048) · 21fbc00d
      georgepisaltu authored 
      This PR is a follow up to #1661 

- [x] rename the `simple` module to `legacy`
- [x] fix benchmarks to disregard the number of additional fields
- [x] change the storage deposits to charge per encoded byte of the
identity information instance, removing the need for `fn
additional(&self) -> usize` in `IdentityInformationProvider`
- [x] ~add an extrinsic to rejig deposits to account for the change
above~
- [ ] ~ensure through proper configuration that the new byte-based
deposit is always lower than whatever is reserved now~
- [x] remove `IdentityFields` from the `set_fields` extrinsic signature,
as per [this
discussion](https://github.com/paritytech/polkadot-sdk/pull/1661#discussion_r1371703403)

> ensure through proper configuration that the new byte-based deposit is
always lower than whatever is reserved now

Not sure this is needed anymore. If the new deposits are higher than
what is currently on chain and users don't have enough funds to reserve
what is needed, the extrinisc fails and they're basically grandfathered
and frozen until they add more funds and/or make a change to their
identity. This behavior seems fine to me. Original idea
[here](https://github.com/paritytech/polkadot-sdk/pull/1661#issuecomment-1779606319).

> add an extrinsic to rejig deposits to account for the change above

This was initially implemented but now removed from this PR in favor of
the implementation detailed
[here](https://github.com/paritytech/polkadot-sdk/pull/2088

).

---------

Signed-off-by: default avatargeorgepisaltu <[email protected]>
Co-authored-by: default avatarjoepetrowski <[email protected]>
      21fbc00d
  11. Nov 01, 2023
  13. Oct 31, 2023
    • Adel Arja's avatar
      1953 defensive testing extrinsic (#1998) · 6e2f94f8
      Adel Arja authored 
      

# Description

The `trigger_defensive` call has been added to the `root-testing`
pallet. The idea is to have this pallet running on `Rococo/Westend` and
use it to verify if the runtime monitoring works end-to-end.

To accomplish this, `trigger_defensive` dispatches an event when it is
called.

Closes #1953

# Checklist

- [x] My PR includes a detailed description as outlined in the
"Description" section above
- [ ] My PR follows the [labeling requirements](CONTRIBUTING.md#Process)
of this project (at minimum one label for `T`
  required)
- [ ] I have made corresponding changes to the documentation (if
applicable)
- [ ] I have added tests that prove my fix is effective or that my
feature works (if applicable)

You can remove the "Checklist" section once all have been checked. Thank
you for your contribution!

✄
-----------------------------------------------------------------------------

---------

Signed-off-by: default avatarOliver Tale-Yazdi <[email protected]>
Co-authored-by: default avatarOliver Tale-Yazdi <[email protected]>
      6e2f94f8
  15. Oct 27, 2023
  17. Oct 24, 2023
    • georgepisaltu's avatar
      Make `IdentityInfo` generic in `pallet-identity` (#1661) · 91851951
      georgepisaltu authored 
      Fixes #179 

# Description

This PR makes the structure containing identity information used in
`pallet-identity` generic through the pallet `Config`. Additionally, the
old structure is now available in a separate module called `simple`
(pending rename) and is compatible with the new interface.

Another change in this PR is that while the `additional` field in
`IdentityInfo` stays for backwards compatibility reasons, the associated
costs are stil present in the pallet through the `additional` function
in the `IdentityInformationProvider` interface. This function is marked
as deprecated as it is only a temporary solution to the backwards
compatibility problem we had. In short, we could have removed the
additional fields in the struct and done a migration, but we chose to
wait and do it off-chain through the genesis of the system parachain.
After we move the identity pallet to the parachain, additional fields
will be migrated into the existing fields and the `additional` key-value
store will be removed. Until that happens, this interface will provide
the necessary information to properly account for the associated costs.

Additionally, this PR fixes an unrelated issue; the `IdentityField` enum
used to represent the fields as bitflags couldn't store more than 8
fields, even though it was marked as `#[repr(u64)]`. This was because of
the `derive` implementation of `TypeInfo`, which assumed `u8` semantics.
The custom implementation of this trait in
https://github.com/paritytech/polkadot-sdk/commit/0105cc0396b7a53d0b290f48b1225847f6d17321


fixes the issue.

---------

Signed-off-by: default avatargeorgepisaltu <[email protected]>
Co-authored-by: default avatarSam Johnson <[email protected]>
Co-authored-by: default avatarjoe petrowski <[email protected]>
      91851951
    • Kian Paimani's avatar
      Ensure correct variant count in `Runtime[Hold/Freeze]Reason` (#1900) · 35eb133b
      Kian Paimani authored 
      closes https://github.com/paritytech/polkadot-sdk/issues/1882



## Breaking Changes

This PR introduces a new item to `pallet_balances::Config`:

```diff
trait Config {
++    type RuntimeFreezeReasons;
}
```

This value is only used to check it against `type MaxFreeze`. A similar
check has been added for `MaxHolds` against `RuntimeHoldReasons`, which
is already given to `pallet_balances`.

In all contexts, you should pass the real `RuntimeFreezeReasons`
generated by `construct_runtime` to `type RuntimeFreezeReasons`. Passing
`()` would also work, but it would imply that the runtime uses no
freezes at all.

---------

Signed-off-by: default avatarOliver Tale-Yazdi <[email protected]>
Co-authored-by: default avatarOliver Tale-Yazdi <[email protected]>
      35eb133b
  19. Oct 23, 2023
  21. Oct 20, 2023
    • Bastian Köcher's avatar
      `xcm`: Change `TypeInfo::path` to not include `staging` (#1948) · f3bf5c1a
      Bastian Köcher authored 
      The `xcm` crate was renamed to `staging-xcm` to be able to publish it to
crates.io as someone as squatted `xcm`. The problem with this rename is
that the `TypeInfo` includes the crate name which ultimately lands in
the metadata. The metadata is consumed by downstream users like
`polkadot-js` or people building on top of `polkadot-js`. These people
are using the entire `path` to find the type in the type registry. Thus,
their code would break as the type path would now be [`staging_xcm`,
`VersionedXcm`] instead of [`xcm`, `VersionedXcm`]. This pull request
fixes this by renaming the path segment `staging_xcm` to `xcm`.

This requires: https://github.com/paritytech/scale-info/pull/197



---------

Co-authored-by: default avatarFrancisco Aguirre <[email protected]>
      f3bf5c1a
  23. Oct 18, 2023
    • Keith Yeung's avatar
      Introduce XcmFeesToAccount fee manager (#1234) · 3dece311
      Keith Yeung authored 
      

Combination of paritytech/polkadot#7005, its addon PR
paritytech/polkadot#7585 and its companion paritytech/cumulus#2433.

This PR introduces a new XcmFeesToAccount struct which implements the
`FeeManager` trait, and assigns this struct as the `FeeManager` in the
XCM config for all runtimes.

The struct simply deposits all fees handled by the XCM executor to a
specified account. In all runtimes, the specified account is configured
as the treasury account.

XCM __delivery__ fees are now being introduced (unless the root origin
is sending a message to a system parachain on behalf of the originating
chain).

# Note for reviewers

Most file changes are tests that had to be modified to account for the
new fees.
Main changes are in:
- cumulus/pallets/xcmp-queue/src/lib.rs <- To make it track the delivery
fees exponential factor
- polkadot/xcm/xcm-builder/src/fee_handling.rs <- Added. Has the
FeeManager implementation
- All runtime xcm_config files <- To add the FeeManager to the XCM
configuration

# Important note

After this change, instructions that create and send a new XCM (Query*,
Report*, ExportMessage, InitiateReserveWithdraw, InitiateTeleport,
DepositReserveAsset, TransferReserveAsset, LockAsset and RequestUnlock)
will require the corresponding origin account in the origin register to
pay for transport delivery fees, and the onward message will fail to be
sent if the origin account does not have the required amount. This
delivery fee is on top of what we already collect as tx fees in
pallet-xcm and XCM BuyExecution fees!

Wallet UIs that want to expose the new delivery fee can do so using the
formula:

```
delivery_fee_factor * (base_fee + encoded_msg_len * per_byte_fee)
```

where the delivery fee factor can be obtained from the corresponding
pallet based on which transport you are using (UMP, HRMP or bridges),
the base fee is a constant, the encoded message length from the message
itself and the per byte fee is the same as the configured per byte fee
for txs (i.e. `TransactionByteFee`).

---------

Co-authored-by: default avatarBranislav Kontur <[email protected]>
Co-authored-by: default avatarjoe petrowski <[email protected]>
Co-authored-by: default avatarGiles Cope <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: default avatarFrancisco Aguirre <[email protected]>
Co-authored-by: default avatarLiam Aharon <[email protected]>
Co-authored-by: default avatarKian Paimani <[email protected]>
      3dece311
    • joe petrowski's avatar
      Add Runtime Missing Crate Descriptions (#1909) · d3ea69b7
      joe petrowski authored 
      Adds descriptions needed for publishing to crates.io.
      d3ea69b7
    • Adrian Catangiu's avatar
      cumulus: add asset-hub-rococo runtime based on asset-hub-kusama and add... · 8b3905d2
      Adrian Catangiu authored 
      
cumulus: add asset-hub-rococo runtime based on asset-hub-kusama and add asset-bridging support to it (#1215)

This commit adds Rococo Asset Hub dedicated runtime so we can test new
features here, before merging them in Kusama Asset Hub.
Also adds one such feature: asset transfer over bridge (Rococo AssetHub
<> Wococo AssetHub)

- clone `asset-hub-kusama-runtime` -> `asset-hub-rococo-runtime`
- make it use Rococo primitives, names, assets, constants, etc
- add asset-transfer-over-bridge support to Rococo AssetHub <> Wococo
AssetHub

Fixes #1128

---------

Co-authored-by: default avatarBranislav Kontur <[email protected]>
Co-authored-by: default avatarjoe petrowski <[email protected]>
Co-authored-by: default avatarFrancisco Aguirre <[email protected]>
      8b3905d2
  25. Oct 16, 2023
  27. Oct 12, 2023
  29. Oct 10, 2023
  31. Oct 07, 2023
    • Muharem Ismailov's avatar
      Treasury spends various asset kinds (#1333) · cb944dc5
      Muharem Ismailov authored 
      

### Summary 

This PR introduces new dispatchables to the treasury pallet, allowing
spends of various asset types. The enhanced features of the treasury
pallet, in conjunction with the asset-rate pallet, are set up and
enabled for Westend and Rococo.

### Westend and Rococo runtimes.

Polkadot/Kusams/Rococo Treasury can accept proposals for `spends` of
various asset kinds by specifying the asset's location and ID.

#### Treasury Instance New Dispatchables:
- `spend(AssetKind, AssetBalance, Beneficiary, Option<ValidFrom>)` -
propose and approve a spend;
- `payout(SpendIndex)` - payout an approved spend or retry a failed
payout
- `check_payment(SpendIndex)` - check the status of a payout;
- `void_spend(SpendIndex)` - void previously approved spend;
> existing spend dispatchable renamed to spend_local

in this context, the `AssetKind` parameter contains the asset's location
and it's corresponding `asset_id`, for example:
`USDT` on `AssetHub`,
``` rust
location = MultiLocation(0, X1(Parachain(1000)))
asset_id = MultiLocation(0, X2(PalletInstance(50), GeneralIndex(1984)))
```

the `Beneficiary` parameter is a `MultiLocation` in the context of the
asset's location, for example
``` rust
// the Fellowship salary pallet's location / account
FellowshipSalaryPallet = MultiLocation(1, X2(Parachain(1001), PalletInstance(64)))
// or custom `AccountId`
Alice = MultiLocation(0, AccountId32(network: None, id: [1,...]))
```

the `AssetBalance` represents the amount of the `AssetKind` to be
transferred to the `Beneficiary`. For permission checks, the asset
amount is converted to the native amount and compared against the
maximum spendable amount determined by the commanding spend origin.

the `spend` dispatchable allows for batching spends with different
`ValidFrom` arguments, enabling milestone-based spending. If the
expectations tied to an approved spend are not met, it is possible to
void the spend later using the `void_spend` dispatchable.

Asset Rate Pallet provides the conversion rate from the `AssetKind` to
the native balance.

#### Asset Rate Instance Dispatchables:
- `create(AssetKind, Rate)` - initialize a conversion rate to the native
balance for the given asset
- `update(AssetKind, Rate)` - update the conversion rate to the native
balance for the given asset
- `remove(AssetKind)` - remove an existing conversion rate to the native
balance for the given asset

the pallet's dispatchables can be executed by the Root or Treasurer
origins.

### Treasury Pallet

Treasury Pallet can accept proposals for `spends` of various asset kinds
and pay them out through the implementation of the `Pay` trait.

New Dispatchables:
- `spend(Config::AssetKind, AssetBalance, Config::Beneficiary,
Option<ValidFrom>)` - propose and approve a spend;
- `payout(SpendIndex)` - payout an approved spend or retry a failed
payout;
- `check_payment(SpendIndex)` - check the status of a payout;
- `void_spend(SpendIndex)` - void previously approved spend;
> existing spend dispatchable renamed to spend_local

The parameters' types of the `spend` dispatchable exposed via the
pallet's `Config` and allows to propose and accept a spend of a certain
amount.

An approved spend can be claimed via the `payout` within the
`Config::SpendPeriod`. Clients provide an implementation of the `Pay`
trait which can pay an asset of the `AssetKind` to the `Beneficiary` in
`AssetBalance` units.

The implementation of the Pay trait might not have an immediate final
payment status, for example if implemented over `XCM` and the actual
transfer happens on a remote chain.

The `check_status` dispatchable can be executed to update the spend's
payment state and retry the `payout` if the payment has failed.

---------

Co-authored-by: default avatarjoe petrowski <[email protected]>
Co-authored-by: command-bot <>
      cb944dc5
  33. Sep 29, 2023
    • Bastian Köcher's avatar
      Remove kusama and polkadot runtime crates (#1731) · bf90cb0b
      Bastian Köcher authored 
      This pull request is removing the Kusama and Polkadot runtime crates. As
still some crates dependent on the runtime crates, this pull request is
doing some more changes.

- It removes the `hostperfcheck` CLI command. This CLI command could
compare the current node against the standard hardware by doing some
checks. Later we added the hardware benchmark feature to Substrate. This
hardware benchmark is running on every node startup and prints a warning
if the current node is too slow. This makes this CLI command a duplicate
that was also depending on the kusama runtime.

- The pull request is removing the emulated integration tests that were
requiring the Kusama or Polkadot runtime crates.
      bf90cb0b
  35. Sep 28, 2023
    • Michal Kucharczyk's avatar
      rococo-runtime: `RococoGenesisExt` removed (#1490) · 50242a61
      Michal Kucharczyk authored 
      [`RococoGenesisExt`](https://github.com/paritytech/polkadot-sdk/blob/a414ea7515c9cdc81f1d12410e646afc148250e8/polkadot/node/service/src/chain_spec.rs#L152-L171

)
is removed. It was the hack to allow overwriting
`EpochDurationInBlocks`. Removal of `RococGenesisExt` prevents from
manipulating the state to change the runtime constants.

Changes:
- Environment variable which controls the `time::EpochDurationInBlocks`
value was added: `ROCOCO_EPOCH_DURATION` (epoch duration will be set to
the value of env),
- `10,100,600` versions of rococo-runtime are built in CI and put into `polkadot-debug` docker image.

`rococo-runtime` building examples:
- to build runtime for `versi_staging_testnet` which had
EpochDurationInBlocks set to 100:
  ```
ROCOCO_EPOCH_DURATION=100 cargo build --features=fast-runtime -p
rococo-runtime
  ```
- to build runtime for `wococo_development`
  ```
ROCOCO_EPOCH_DURATION=10 cargo build --features=fast-runtime -p
rococo-runtime
  ```
- to build `versi-staging` chain spec:
  ```
ROCOCO_EPOCH_DURATION=100 cargo run -p polkadot --features=fast-runtime
-- build-spec --chain versi-staging --raw
  ```
- to build `wococo-dev` chain spec:
  ```
ROCOCO_EPOCH_DURATION=10 cargo run -p polkadot --features=fast-runtime
-- build-spec --chain wococo-dev --raw
  ```

It is also possible to change the epoch duration by replacing the `code` field in the chain spec with the hex dump of pre-built runtime wasm blob (because the epoch duration is hard-coded into wasm blob).

---------

Co-authored-by: default avatarBastian Köcher <[email protected]>
      50242a61
  37. Sep 27, 2023
  39. Sep 20, 2023
    • joe petrowski's avatar
      Disable Calls to Identity Pallet (#1476) · 771c3fbd
      joe petrowski authored 
      This PR filters calls from the Identity pallet from all Relay Chain
runtimes as preparation to move the identity state and logic to a system
parachain within each network.

After this change is deployed to a runtime, no more changes such as
adding new sub-identities will be possible. The frozen state will be
part of the genesis state of the system chain. After the system chain
launches, the pallet and all state will be removed from each Relay
Chain.

Applications and UIs that render display information from this pallet
will need to read from the system chain when it launches.
      771c3fbd
  41. Sep 19, 2023
  43. Sep 18, 2023
  45. Sep 17, 2023
  47. Sep 15, 2023
  49. Sep 13, 2023
    • Liam Aharon's avatar
      Stabilize `VersionedMigration` (#1503) · 72de70c7
      Liam Aharon authored 
      `VersionedMigration` has become somewhat widely used for handling
version bumps in migrations the last few months.

It is currently behind the `experimental` feature flag, requiring every
pallet that writes a new migration with version bumps to set up the
`experimental` flag in their own Cargo.tomls, and also for every runtime
using these pallets to explicitly enable the `experimental` flag for
each pallet.

This is becoming quite verbose, and I can only see the number of pallets
requiring the experimental flag increasing for no other reason than
using what has become a commonly used feature.

Additionally, I'm writing migration docs and would like to avoid
stepping through how to use the `experimental` feature to get
`VersionedMigration` working.

Since the feature has been used in production for some time now without
any reported issues, is becoming commonly used and ready to advertise in
docs, I feel this is a good time to make it non-experimental.
      72de70c7
  51. Sep 11, 2023
  53. Sep 09, 2023
  55. Sep 06, 2023
  57. Sep 04, 2023
    • Chevdor's avatar
      Markdown linter (#1309) · a30092ab
      Chevdor authored 
      

* Add markdown linting

- add linter default rules
- adapt rules to current code
- fix the code for linting to pass
- add CI check

fix #1243

* Fix markdown for Substrate
* Fix tooling install
* Fix workflow
* Add documentation
* Remove trailing spaces
* Update .github/.markdownlint.yaml

Co-authored-by: default avatarOliver Tale-Yazdi <[email protected]>
* Fix mangled markdown/lists
* Fix captalization issues on known words
      a30092ab
  59. Aug 31, 2023
    • Bastian Köcher's avatar
      Rename `polkadot-parachain` to `polkadot-parachain-primitives` (#1334) · a33d7922
      Bastian Köcher authored 
      * Rename `polkadot-parachain` to `polkadot-parachain-primitives`

While doing this it also fixes some last `rustdoc` issues and fixes
another Cargo warning related to `pallet-paged-list`.

* Fix compilation

* ".git/.scripts/commands/fmt/fmt.sh"

* Fix XCM docs

---------

Co-authored-by: command-bot <>
      a33d7922
    • Alin Dima's avatar
      backing: move the min votes threshold to the runtime (#1200) · d6af073a
      Alin Dima authored 
      

* move min backing votes const to runtime

also cache it per-session in the backing subsystem

Signed-off-by: default avataralindima <[email protected]>

* add runtime migration

* introduce api versioning for min_backing votes

also enable it for rococo/versi for testing

* also add min_backing_votes runtime calls to statement-distribution

this dependency has been recently introduced by async backing

* remove explicit version runtime API call

this is not needed, as the RuntimeAPISubsystem already takes care
of versioning and will return NotSupported if the version is not
right.

* address review comments

- parametrise backing votes runtime API with session index
- remove RuntimeInfo usage in backing subsystem, as runtime API
caches the min backing votes by session index anyway.
- move the logic for adjusting the configured needed backing votes with the size of the backing group
to a primitives helper.
- move the legacy min backing votes value to a primitives helper.
- mark JoinMultiple error as fatal, since the Canceled (non-multiple) counterpart is also fatal.
- make backing subsystem handle fatal errors for new leaves update.
- add HostConfiguration consistency check for zeroed backing votes threshold
- add cumulus accompanying change

* fix cumulus test compilation

* fix tests

* more small fixes

* fix merge

* bump runtime api version for westend and rollback version for rococo

---------

Signed-off-by: default avataralindima <[email protected]>
Co-authored-by: default avatarJavier Viola <[email protected]>
      d6af073a