- Jan 16, 2024
-
-
Francisco Aguirre authored
# Note for reviewer Most changes are just syntax changes necessary for the new version. Most important files should be the ones under the `xcm` folder. # Description Added XCMv4. ## Removed `Multi` prefix The following types have been renamed: - MultiLocation -> Location - MultiAsset -> Asset - MultiAssets -> Assets - InteriorMultiLocation -> InteriorLocation - MultiAssetFilter -> AssetFilter - VersionedMultiAsset -> VersionedAsset - WildMultiAsset -> WildAsset - VersionedMultiLocation -> VersionedLocation In order to fix a name conflict, the `Assets` in `xcm-executor` were renamed to `HoldingAssets`, as they represent assets in holding. ## Removed `Abstract` asset id It was not being used anywhere and this simplifies the code. Now assets are just constructed as follows: ```rust let asset: Asset = (AssetId(Location::new(1, Here)), 100u128).into(); ``` No need for specifying `Concrete` anymore. ## Outcome is now a named fields struct Instead of ```rust pub enum Outcome { Complete(Weight), Incomplete(Weight, Error), Error(Error), } ``` we now have ```rust pub enum Outcome { Complete { used: Weight }, Incomplete { used: Weight, error: Error }, Error { error: Error }, } ``` ## Added Reanchorable trait Now both locations and assets implement this trait, making it easier to reanchor both. ## New syntax for building locations and junctions Now junctions are built using the following methods: ```rust let location = Location { parents: 1, interior: [Parachain(1000), PalletInstance(50), GeneralIndex(1984)].into() }; ``` or ```rust let location = Location::new(1, [Parachain(1000), PalletInstance(50), GeneralIndex(1984)]); ``` And they are matched like so: ```rust match location.unpack() { (1, [Parachain(id)]) => ... (0, Here) => ..., (1, [_]) => ..., } ``` This syntax is mandatory in v4, and has been also implemented for v2 and v3 for easier migration. This was needed to make all sizes smaller. # TODO - [x] Scaffold v4 - [x] Port github.com/paritytech/polkadot/pull/7236 - [x] Remove `Multi` prefix - [x] Remove `Abstract` asset id --------- Co-authored-by: command-bot <> Co-authored-by:
Keith Yeung <[email protected]>
-
- Jan 10, 2024
-
-
Clara van Staden authored
- updates snowbridge crates to `0.9.0` - updates Cargo.toml files in preparation for publishing to crates.io - adds Kusama and Polkadot Snowbridge runtime config crates - moves runtime tests from the Snowbridge subtree into the bridge hub tests dir --------- Co-authored-by: claravanstaden <Cats 4 life!> Co-authored-by:
Ron <[email protected]>
-
- Jan 09, 2024
-
-
Clara van Staden authored
- Includes the introduction of the `fast-runtime` feature, which cleans up our features - Updates beacon client fork versions config to Sepolia's versions - Cleanup of AgentIdOf --------- Co-authored-by:
Ron <[email protected]> Co-authored-by: claravanstaden <Cats 4 life!>
-
- Jan 07, 2024
-
-
dependabot[bot] authored
Bumps the known_good_semver group with 4 updates: [serde](https://github.com/serde-rs/serde), [serde_json](https://github.com/serde-rs/json), [clap](https://github.com/clap-rs/clap) and [syn](https://github.com/dtolnay/syn). Updates `serde` from 1.0.194 to 1.0.195 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/serde/releases">serde's releases</a>.</em></p> <blockquote> <h2>v1.0.195</h2> <ul> <li>Prevent remote definitions of tuple struct or tuple variant from triggering dead_code warning (<a href="https://redirect.github.com/serde-rs/serde/issues/2671">#2671</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/serde/commit/03eec42c3313b36da416be1486e9ecac345784d5"><code>03eec42</code></a> Release 1.0.195</li> <li><a href="https://github.com/serde-rs/serde/commit/196f311ae2fd8ad94fe38a57830419859a4d3dbb"><code>196f311</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2671">#2671</a> from dtolnay/deadremote</li> <li><a href="https://github.com/serde-rs/serde/commit/38d9e0b2091e9b6150486c2c37367819b86bcc39"><code>38d9e0b</code></a> Revert "Add FIXME to fix dead_code warning when using serde(remote)"</li> <li><a href="https://github.com/serde-rs/serde/commit/6502b3131697eff6420786ad71f87f29cfff3a13"><code>6502b31</code></a> Fix new dead_code warning in tuple struct and tuple variant remote defs</li> <li><a href="https://github.com/serde-rs/serde/commit/6f1a8c3115c8d2502178c25d610fbaee2e82c46b"><code>6f1a8c3</code></a> Add FIXME to fix dead_code warning when using serde(remote)</li> <li><a href="https://github.com/serde-rs/serde/commit/d883c94cc9fe72d0512dc7f4def7191a401595c9"><code>d883c94</code></a> Work around dead_code warning in tests</li> <li><a href="https://github.com/serde-rs/serde/commit/961fa59a7469c5b5e323b9723323df412048d60d"><code>961fa59</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2670">#2670</a> from serde-rs/exhaustive</li> <li><a href="https://github.com/serde-rs/serde/commit/8bc71def551df190e6817d3311e5c76f751f53e6"><code>8bc71de</code></a> Fill in omitted patterns for GenericArguments match</li> <li><a href="https://github.com/serde-rs/serde/commit/7c65a9dc0eab2d4d829b258a7b3549351bbe8dcd"><code>7c65a9d</code></a> Pick up changes to non_exhaustive_omitted_patterns lint</li> <li>See full diff in <a href="https://github.com/serde-rs/serde/compare/v1.0.194...v1.0.195">compare view</a></li> </ul> </details> <br /> Updates `serde_json` from 1.0.110 to 1.0.111 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/json/releases">serde_json's releases</a>.</em></p> <blockquote> <h2>v1.0.111</h2> <ul> <li>Improve floating point parsing performance on loongarch64 (<a href="https://redirect.github.com/serde-rs/json/issues/1100">#1100</a>, thanks <a href="https://github.com/heiher"><code>@heiher</code></a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/json/commit/0131ac68212e8094bd14ee618587d731b4f9a68b"><code>0131ac6</code></a> Release 1.0.111</li> <li><a href="https://github.com/serde-rs/json/commit/96ecfadd3f7dd6366a2d07a098e228d15df93cb4"><code>96ecfad</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/json/issues/1100">#1100</a> from heiher/limb-64-la64</li> <li><a href="https://github.com/serde-rs/json/commit/c80dbaf8ff5902ca670e0a48bbe495065b9314f5"><code>c80dbaf</code></a> Set limb width to 64 for loongarch64</li> <li>See full diff in <a href="https://github.com/serde-rs/json/compare/v1.0.110...v1.0.111">compare view</a></li> </ul> </details> <br /> Updates `clap` from 4.4.12 to 4.4.13 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/releases">clap's releases</a>.</em></p> <blockquote> <h2>v4.4.13</h2> <h2>[4.4.13] - 2024-01-04</h2> <h3>Documentation</h3> <ul> <li>Fix link to structopt migration guide</li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's changelog</a>.</em></p> <blockquote> <h2>[4.4.13] - 2024-01-04</h2> <h3>Documentation</h3> <ul> <li>Fix link to structopt migration guide</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/clap-rs/clap/commit/2ab48b295c2463ce8c141a9868095b811ccf3b99"><code>2ab48b2</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/7a06a8cd619db704c6d826bf752eae3b86ce23a8"><code>7a06a8c</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/cca190efedf40f48147a3a4a777a9cc17728abdf"><code>cca190e</code></a> docs: Correct link to StructOpt migration guide</li> <li><a href="https://github.com/clap-rs/clap/commit/5c31f453c1a9f46109db8e0a47ed212748c0556c"><code>5c31f45</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5281">#5281</a> from Manishearth/safety-docs</li> <li><a href="https://github.com/clap-rs/clap/commit/ddae7e6f411c4c87294212152b8d9beea16637e7"><code>ddae7e6</code></a> Correct safety docs</li> <li><a href="https://github.com/clap-rs/clap/commit/48d28aa689bfd0fb44ec025244b30ba261e2515a"><code>48d28aa</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/748ce18cc2ccc3f7c07fa8b7c5b6f90ed9242b72"><code>748ce18</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/adbe6ec4cb6a617070c41927a389d0bea7b30936"><code>adbe6ec</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5278">#5278</a> from henry-hsieh/fix-nosort</li> <li><a href="https://github.com/clap-rs/clap/commit/2b48858ba84c62e9af97bee4734d70530254cd8a"><code>2b48858</code></a> fix: Skip nosort option below bash 4.4</li> <li><a href="https://github.com/clap-rs/clap/commit/777b744102cde324dc75534ef043efc15a9f40be"><code>777b744</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5277">#5277</a> from clap-rs/renovate/actions-setup-python-5.x</li> <li>Additional commits viewable in <a href="https://github.com/clap-rs/clap/compare/v4.4.12...v4.4.13">compare view</a></li> </ul> </details> <br /> Updates `syn` from 2.0.47 to 2.0.48 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/dtolnay/syn/releases">syn's releases</a>.</em></p> <blockquote> <h2>2.0.48</h2> <ul> <li>Improve error message on unexpected token after <code>else</code> (<a href="https://redirect.github.com/dtolnay/syn/issues/1578">#1578</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/dtolnay/syn/commit/5e16fc24e68b16a381cb7ef22455dba9db143083"><code>5e16fc2</code></a> Release 2.0.48</li> <li><a href="https://github.com/dtolnay/syn/commit/dc40084b15ab4a443179fc39cbadac6452408838"><code>dc40084</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/syn/issues/1578">#1578</a> from dtolnay/elseblock</li> <li><a href="https://github.com/dtolnay/syn/commit/82fcefce69d36e78301936c5af91f005d6a24357"><code>82fcefc</code></a> Fix error message on unexpected token after 'else'</li> <li><a href="https://github.com/dtolnay/syn/commit/e8a5c68ad45194e575a923f6b1e08f1817196331"><code>e8a5c68</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/syn/issues/1576">#1576</a> from dtolnay/exhaustive</li> <li><a href="https://github.com/dtolnay/syn/commit/97b1df6d935cb4801f4090782304577c8574d024"><code>97b1df6</code></a> Pick up changes to non_exhaustive_omitted_patterns lint</li> <li>See full diff in <a href="https://github.com/dtolnay/syn/compare/2.0.47...2.0.48 ">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by:
dependabot[bot] <[email protected]> Co-authored-by:
dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
-
- Jan 04, 2024
-
-
dependabot[bot] authored
Bumps the known_good_semver group with 4 updates: [serde](https://github.com/serde-rs/serde), [serde_json](https://github.com/serde-rs/json), [clap](https://github.com/clap-rs/clap) and [serde_yaml](https://github.com/dtolnay/serde-yaml). Updates `serde` from 1.0.193 to 1.0.194 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/serde/releases">serde's releases</a>.</em></p> <blockquote> <h2>v1.0.194</h2> <ul> <li>Update proc-macro2 to fix caching issue when using a rustc-wrapper such as sccache</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/serde/commit/d2d977a6c6dcff237ae956336d18b0c900c61aad"><code>d2d977a</code></a> Release 1.0.194</li> <li><a href="https://github.com/serde-rs/serde/commit/a9a6ee9d7f2e3a3306ad7c7a8f21dcf369c6acb7"><code>a9a6ee9</code></a> Pull in proc-macro2 sccache fix</li> <li><a href="https://github.com/serde-rs/serde/commit/28c5d215c11b66368b725f04cb92e49e4350bcdc"><code>28c5d21</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2669">#2669</a> from dtolnay/optionifletelse</li> <li><a href="https://github.com/serde-rs/serde/commit/3d6a789562579fb7ea783e0d7f35530914d8baca"><code>3d6a789</code></a> Remove option_if_let_else clippy suppression</li> <li><a href="https://github.com/serde-rs/serde/commit/a0e68698e33fa928f1d9f208d68b17df9f8bb568"><code>a0e6869</code></a> Work around doc_link_with_quotes pedantic clippy lint</li> <li>See full diff in <a href="https://github.com/serde-rs/serde/compare/v1.0.193...v1.0.194">compare view</a></li> </ul> </details> <br /> Updates `serde_json` from 1.0.108 to 1.0.110 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/json/releases">serde_json's releases</a>.</em></p> <blockquote> <h2>v1.0.109</h2> <ul> <li>Documentation improvements</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/json/commit/df5cf215b70fb6341b255e7c0a210c06f64c0669"><code>df5cf21</code></a> Release 1.0.110</li> <li><a href="https://github.com/serde-rs/json/commit/c35856a93c37b48b3d6efc4fec8e05554dd3f9d5"><code>c35856a</code></a> Pull in proc-macro2 sccache fix</li> <li><a href="https://github.com/serde-rs/json/commit/f88bf1fccb05aa4de129675de44eb6aaf3fec0a0"><code>f88bf1f</code></a> Release 1.0.109</li> <li><a href="https://github.com/serde-rs/json/commit/bb62c73ecef901e689b0a7a67ed613a32975520c"><code>bb62c73</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/json/issues/1097">#1097</a> from serde-rs/doccfg</li> <li><a href="https://github.com/serde-rs/json/commit/df36d109fd9f9cdd22a874c0177cafec12237f95"><code>df36d10</code></a> Restore doc cfg on re-exports</li> <li><a href="https://github.com/serde-rs/json/commit/c3670913423329c166add9d85ecdfc3e3da21e7a"><code>c367091</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/json/issues/1095">#1095</a> from dtolnay/hashtest</li> <li><a href="https://github.com/serde-rs/json/commit/b328ee7df4dd772922f084600aa7cea39218b694"><code>b328ee7</code></a> Eliminate hash closure in favor of calling hash_one directly</li> <li><a href="https://github.com/serde-rs/json/commit/b9bcbad3c094042f79f1a45189ec0edbb8f9f322"><code>b9bcbad</code></a> Use BuildHasher::hash_one</li> <li><a href="https://github.com/serde-rs/json/commit/7ff6c9e30c2ecc2cdcf089ed86c7ccfe7a41721c"><code>7ff6c9e</code></a> Use random hasher state for number hashing test</li> <li><a href="https://github.com/serde-rs/json/commit/fe031cd1de4dde5b47e0f18934632b41bd18b48d"><code>fe031cd</code></a> Delete trace_macros! functionality from test</li> <li>Additional commits viewable in <a href="https://github.com/serde-rs/json/compare/v1.0.108...v1.0.110">compare view</a></li> </ul> </details> <br /> Updates `clap` from 4.4.11 to 4.4.12 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/releases">clap's releases</a>.</em></p> <blockquote> <h2>v4.4.12</h2> <h2>[4.4.12] - 2023-12-28</h2> <h3>Performance</h3> <ul> <li>Only ask <code>TypedValueParser</code> for possible values if needed</li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's changelog</a>.</em></p> <blockquote> <h2>[4.4.12] - 2023-12-28</h2> <h3>Performance</h3> <ul> <li>Only ask <code>TypedValueParser</code> for possible values if needed</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/clap-rs/clap/commit/6d601e6f312857d78f47741268f1748840484d4a"><code>6d601e6</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/048e7f0fbc4f8108894e4307af768c8d332a0576"><code>048e7f0</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/53f5b820988c1c03f0d2696fc144857ad461edc1"><code>53f5b82</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5267">#5267</a> from vermiculus/sa/avoid-pv-expansion-in-help</li> <li><a href="https://github.com/clap-rs/clap/commit/05cd057978db743a65fb5fde33213af752d064e7"><code>05cd057</code></a> perf: Avoid retrieving possible_values unless used</li> <li><a href="https://github.com/clap-rs/clap/commit/29208083b0598ba7d1b80e79821c0ba3eb2342ce"><code>2920808</code></a> test: Update snapshots</li> <li><a href="https://github.com/clap-rs/clap/commit/28763ebb6d8714f6ca588bf477729040e0e760b0"><code>28763eb</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/ace7bb5b4570b030f7c2d0fa91e0afaaac1b0030"><code>ace7bb5</code></a> docs(complete): Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/76beca4d4d42a817bbb578f23553c64ded2aea97"><code>76beca4</code></a> docs(complete): Polish API reference for dynamic</li> <li><a href="https://github.com/clap-rs/clap/commit/3630e582d3ec59912b8e9369c38687695ddb1f43"><code>3630e58</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5273">#5273</a> from epage/docsrs</li> <li><a href="https://github.com/clap-rs/clap/commit/3724b9e2e4c2a2e69337b6d809949b246d3fef39"><code>3724b9e</code></a> docs: Include more content on docs.rs</li> <li>See full diff in <a href="https://github.com/clap-rs/clap/compare/v4.4.11...v4.4.12">compare view</a></li> </ul> </details> <br /> Updates `serde_yaml` from 0.9.29 to 0.9.30 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/dtolnay/serde-yaml/releases">serde_yaml's releases</a>.</em></p> <blockquote> <h2>0.9.30</h2> <ul> <li>Update proc-macro2 to fix caching issue when using a rustc-wrapper such as sccache</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/dtolnay/serde-yaml/commit/09ee25156f608f95150b27edd120bd5471db3c64"><code>09ee251</code></a> Release 0.9.30</li> <li><a href="https://github.com/dtolnay/serde-yaml/commit/caea939ece85ab54ac41de0672d683905f1e406a"><code>caea939</code></a> Pull in proc-macro2 sccache fix</li> <li><a href="https://github.com/dtolnay/serde-yaml/commit/d255918c141fd72d01f169bb5aa0152234981699"><code>d255918</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/serde-yaml/issues/403">#403</a> from dtolnay/optionifletelse</li> <li><a href="https://github.com/dtolnay/serde-yaml/commit/8cfeedd766f83dab24d03b9fb11b72886a247425"><code>8cfeedd</code></a> Remove option_if_let_else clippy suppression</li> <li>See full diff in <a href="https://github.com/dtolnay/serde-yaml/compare/0.9.29...0.9.30 ">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by:
dependabot[bot] <[email protected]> Co-authored-by:
dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
-
- Dec 22, 2023
-
-
-
joe petrowski authored
- Updates all safe call filters to allow `system::authorize_upgrade`. - Updates Coretime safe call filter to allow `sudo` and `system_set_storage`. - Update Coretime teleports to allow teleportation with other system chains. --------- Co-authored-by:
Bastian Köcher <[email protected]>
-
Branislav Kontur authored
-
- Dec 21, 2023
-
-
Alejandro Martinez Andres authored
After merging https://github.com/paritytech/polkadot-sdk/pull/2522 asset-hub-rococo and bridge-hub-rococo runtime versions need to be bumped for their deployment. --------- Co-authored-by:
joe petrowski <[email protected]>
-
Svyatoslav Nikolsky authored
related to https://github.com/paritytech/parity-bridges-common/issues/2739
-
Clara van Staden authored
# Description Adds Snowbridge to the Rococo bridge hub runtime. Includes config changes required in Rococo asset hub. --------- Co-authored-by:
Alistair Singh <[email protected]> Co-authored-by:
ron <[email protected]> Co-authored-by:
Vincent Geddes <[email protected]> Co-authored-by: claravanstaden <Cats 4 life!>
-
Svyatoslav Nikolsky authored
related to https://github.com/paritytech/parity-bridges-common/issues/2739 Co-authored-by:
Branislav Kontur <[email protected]>
-
- Dec 20, 2023
-
-
joe petrowski authored
Adds the `authorize_upgrade` -> `enact_authorized_upgrade` pattern to `frame-system`. This will be useful for upgrading bridged chains that are under the governance of Polkadot without passing entire runtime Wasm blobs over a bridge. Notes: - Changed `enact_authorized_upgrade` to `apply_authorized_upgrade`. Personal opinion, "apply" more accurately expresses what it's doing. Can change back if outvoted. - Remove `check_version` in favor of two extrinsics, so as to make _checked_ the default. - Left calls in `parachain-system` and marked as deprecated to prevent breaking the API. They just call into the `frame-system` functions. - Updated `frame-system` benchmarks to v2 syntax. --------- Co-authored-by: command-bot <>
-
- Dec 18, 2023
-
-
Branislav Kontur authored
This PR contains just a few clippy fixes and nits, which are, however, relaxed by workspace clippy settings here: https://github.com/paritytech/polkadot-sdk/blob/master/Cargo.toml#L483-L506 --------- Co-authored-by:
Dmitry Sinyavin <[email protected]> Co-authored-by:
ordian <[email protected]> Co-authored-by: command-bot <> Co-authored-by:
Bastian Köcher <[email protected]>
-
- Dec 15, 2023
-
-
Svyatoslav Nikolsky authored
This PR adds possibility for relay chain governance to halt and resume bridge pallets using XCM calls. Following calls are enabled over XCM for the `root` origin: `pallet_bridge_grandpa::set_operating_mode`, `pallet_bridge_parachains::set_operating_mode` and `pallet_bridge_messages::set_operating_mode`.
-
- Dec 14, 2023
-
-
Svyatoslav Nikolsky authored
This PR adds [Rococo People](https://github.com/paritytech/polkadot-sdk/pull/2281) <> [Rococo Bulletin](https://github.com/zdave-parity/polkadot-bulletin-chain) to the Rococo Bridge Hub code. There's a couple of things left to do here: - [x] add remaining tests - it'd need some refactoring in the `bridge-hub-test-utils` - will do in a separate PR; - [x] actually run benchmarks for new messaging pallet (do we have bot nowadays?). The reason why I'm opening it before this ^^^ is ready, is that I'd like to hear others opinion on how to deal with hacks with that bridge. Initially I was assuming that Rococo Bulletin will be the 1:1 copy of the Polkadot Bulletin (to avoid maintaining multiple runtimes/releases/...), so you can see many `PolkadotBulletin` mentions in this PR, even though we are going to bridge with the parallel chain (`RococoBulletin`). That's because e.g. pallet names from `construct_runtime` are affecting runtime storage keys and bridges are using runtime storage proofs => it is important to use names that the Bulletin chain expects. But in the end, this hack won't work - we can't use Polkadot Bulletin runtime to bridge with Rococo Bridge Hub, because Polkadot Bulletin expects Polkadot Bridge hub to use `1002` parachain id and Rococo Bridge Hub seats on the `1013`. This also affects storage keys using in bridging, so I had to add the [`rococo` feature](https://github.com/svyatonik/polkadot-bulletin-chain/blob/add-bridge-pallets/runtime/Cargo.toml#L198) to the Bulletin chain. So now we can actually alter its runtime and adapt it for Rococo. So the question here is - what's better for us here - to leave everything as is (seems hacky and non-trivial); - change Bulletin chain runtime when `rococo` feature is used - e.g. use proper names there (`WithPolkadotGrandpa` -> `WithRococoGrandpa`, ...) - add another set of pallets to the Bulletin chain runtime to bridge with Rococo and never use them in production. Similar to hack that we had in Rococo/Wococo cc @acatangiu @bkontur @serban300 also cc @joepetrowski as the main "client" of this bridge --- A couple words on how this bridge is different from the Rococo <> Westend bridge: - it is a bridge with a chain that uses GRANDPA finality, not the parachain finality (hence the tests needs to be changed); - it is a fee-free bridge. So `AllowExplicitUnpaidExecutionFrom<Equals<SiblingPeople>>` + we are not paying any rewards to relayers (apart from compensating transaction costs). --------- Signed-off-by:
dependabot[bot] <[email protected]> Signed-off-by:
Andrei Sandu <[email protected]> Co-authored-by:
Adrian Catangiu <[email protected]> Co-authored-by:
dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by:
Andrei Sandu <[email protected]> Co-authored-by:
Egor_P <[email protected]> Co-authored-by: command-bot <>
-
Francisco Aguirre authored
In the move from the old `Currency` traits to the new `fungible/s` family of traits, we already had the `FungiblesAdapter` and `NonFungiblesAdapter` for multiple fungible and non fungible assets respectively. However, for handling only one fungible asset, we were missing a `FungibleAdapter`, and so used the old `CurrencyAdapter` instead. This PR aims to fill in that gap, and provide the new adapter for more updated examples. I marked the old `CurrencyAdapter` as deprecated as part of this PR, and I'll change it to the new `FungibleAdapter` in a following PR. The two stages are separated so as to not bloat this PR with some name fixes in tests. --------- Co-authored-by: command-bot <>
-
Egor_P authored
This PR backports `transaction_version` bump from `1.5.0` release back to `master`
-
- Dec 13, 2023
-
-
Squirrel authored
We currently use a bit of a hack in `.cargo/config` to make sure that clippy isn't too annoying by specifying the list of lints. There is now a stable way to define lints for a workspace. The only down side is that every crate seems to have to opt into this so there's a *few* files modified in this PR. Dependencies: - [x] PR that upgrades CI to use rust 1.74 is merged. --------- Co-authored-by:
joe petrowski <[email protected]> Co-authored-by:
Branislav Kontur <[email protected]> Co-authored-by:
Liam Aharon <[email protected]>
-
Branislav Kontur authored
Co-authored-by: command-bot <>
-
Svyatoslav Nikolsky authored
So far the `bridge-hub-test-utils` contained a tests set for testing BridgeHub runtime that is bridging with the remote **parachain**. But we have https://github.com/paritytech/polkadot-sdk/pull/2540 coming, which would add Rococo <> Bulletin chain bridge (where Bulletin = standalone chain that is using GRANDPA finality). Then it'll be expanded to Polkadot BH as well. So this PR adds the same set of tests to the `bridge-hub-test-utils`, but for the case when remote chain is the chain with GRANDPA finality. There's a lot of changes in this PR - I'll describe some: - I've added `BasicParachainRuntime` trait to decrease number of lines we need to add to `where` clause. Could revert, but imo it is useful; - `cumulus/parachains/runtimes/bridge-hubs/test-utils/src/test_data` is a submodule for generating test data for the test sets. `from_parachain.rs` is used in tests for the case when remote chain is a parachain, `from_grandpa_chain.rs` - for the bridges with remote GRANDPA chains. `mod.rs` has some code, shared by both types of tests; - `cumulus/parachains/runtimes/bridge-hubs/test-utils/src/test_data` is a submodule with all test cases. The `mod.rs` has tests, suitable for all cases. There's also `wth_parachain.rs` and `with_grandpa_chain.rs` with the same meaning as above; - I've merged the "core" code of two previous tests - `relayed_incoming_message_works` and `complex_relay_extrinsic_works` into one single `relayed_incoming_message_works` test. So now we are always constructing extrinsics and are dispatching them using executive module (meaning all signed extensions are also tested). New test set is used here: https://github.com/paritytech/polkadot-sdk/pull/2540. Once this PR is merged, I'll merge that other PR with master to remove duplicate changes. I'm also planning to cleanup generic constraints + remove some unnecessary assumptions about used chains in a follow-up PRs. But for now I think this PR has enough changes, so don't want to complicate it even more. --- Breaking changes for the code that have used those tests before: - the `construct_and_apply_extrinsic` callback now accepts the `RuntimeCall` instead of the `pallet_utility::Call`; - the `construct_and_apply_extrinsic` now may be called multiple times for the single test, so make sure the `frame_system::CheckNonce` is correctly constructed; - all previous tests have been moved from `bridge_hub_test_utils::test_cases` to `bridge_hub_test_utils::test_cases::from_parachain` module; - there are several changes in test arguments - please refer to https://github.com/paritytech/polkadot-sdk/compare/sv-tests-for-bridge-with-remote-grandpa-chain?expand=1#diff-79a28d4d3e1749050341c2424f00c4c139825b1a20937767f83e58b95166735c for details.
-
- Dec 12, 2023
-
-
Francisco Aguirre authored
We were not filtering for sibling parachains, but for sibling anything --------- Co-authored-by:
Branislav Kontur <[email protected]> Co-authored-by: command-bot <>
-
Branislav Kontur authored
## Summary This pull request proposes a solution for improved control of the versioned XCM flow over the bridge (across different consensus chains) and resolves the situation where the sending chain/consensus has already migrated to a higher XCM version than the receiving chain/consensus. ## Problem/Motivation The current flow over the bridge involves a transfer from AssetHubRococo (AHR) to BridgeHubRococo (BHR) to BridgeHubWestend (BHW) and finally to AssetHubWestend (AHW), beginning with a reserve-backed transfer on AHR. In this process: 1. AHR sends XCM `ExportMessage` through `XcmpQueue`, incorporating XCM version checks using the `WrapVersion` feature, influenced by `pallet_xcm::SupportedVersion` (managed by `pallet_xcm::force_xcm_version` or version discovery). 2. BHR handles the `ExportMessage` instruction, utilizing the latest XCM version. The `HaulBlobExporter` converts the inner XCM to [`VersionedXcm::from`](https://github.com/paritytech/polkadot-sdk/blob/63ac2471aa0210f0ac9903bdd7d8f9351f9a635f/polkadot/xcm/xcm-builder/src/universal_exports.rs#L465-L467), also using the latest XCM version. However, challenges arise: - Incompatibility when BHW uses a different version than BHR. For instance, if BHR migrates to **XCMv4** while BHW remains on **XCMv3**, BHR's `VersionedXcm::from` uses `VersionedXcm::V4` variant, causing encoding issues for BHW. ``` /// Just a simulation of possible error, which could happen on BHW /// (this code is based on actual master without XCMv4) let encoded = hex_literal::hex!("0400"); println!("{:?}", VersionedXcm::<()>::decode(&mut &encoded[..])); Err(Error { cause: None, desc: "Could not decode `VersionedXcm`, variant doesn't exist" }) ``` - Similar compatibility issues exist between AHR and AHW. ## Solution This pull request introduces the following solutions: 1. **New trait `CheckVersion`** - added to the `xcm` module and exposing `pallet_xcm::SupportedVersion`. This enhancement allows checking the actual XCM version for desired destinations outside of the `pallet_xcm` module. 2. **Version Check in `HaulBlobExporter`** uses `CheckVersion` to check known/configured destination versions, ensuring compatibility. For example, in the scenario mentioned, BHR can store the version `3` for BHW. If BHR is on XCMv4, it will attempt to downgrade the message to version `3` instead of using the latest version `4`. 3. **Version Check in `pallet-xcm-bridge-hub-router`** - this check ensures compatibility with the real destination's XCM version, preventing the unnecessary sending of messages to the local bridge hub if versions are incompatible. These additions aim to improve the control and compatibility of XCM flows over the bridge and addressing issues related to version mismatches. ## Possible alternative solution _(More investigation is needed, and at the very least, it should extend to XCMv4/5. If this proves to be a viable option, I can open an RFC for XCM.)._ Add the `XcmVersion` attribute to the `ExportMessage` so that the sending chain can determine, based on what is stored in `pallet_xcm::SupportedVersion`, the version the destination is using. This way, we may not need to handle the version in `HaulBlobExporter`. ``` ExportMessage { network: NetworkId, destination: InteriorMultiLocation, xcm: Xcm<()> destination_xcm_version: Version, // <- new attritbute }, ``` ``` pub trait ExportXcm { fn validate( network: NetworkId, channel: u32, universal_source: &mut Option<InteriorMultiLocation>, destination: &mut Option<InteriorMultiLocation>, message: &mut Option<Xcm<()>>, destination_xcm_version: Version, , // <- new attritbute ) -> SendResult<Self::Ticket>; ``` ## Future Directions This PR does not fix version discovery over bridge, further investigation will be conducted here: https://github.com/paritytech/polkadot-sdk/issues/2417. ## TODO - [x] `pallet_xcm` mock for tests uses hard-coded XCM version `2` - change to 3 or lastest? - [x] fix `pallet-xcm-bridge-hub-router` - [x] fix HaulBlobExporter with version determination [here](https://github.com/paritytech/polkadot-sdk/blob/2183669d05f9b510f979a0cc3c7847707bacba2e/polkadot/xcm/xcm-builder/src/universal_exports.rs#L465) - [x] add unit-tests to the runtimes - [x] run benchmarks for `ExportMessage` - [x] extend local run scripts about `force_xcm_version(dest, version)` - [ ] when merged, prepare governance calls for Rococo/Westend - [ ] add PRDoc Part of: https://github.com/paritytech/parity-bridges-common/issues/2719 --------- Co-authored-by: command-bot <>
-
Chevdor authored
This PR introduces a script and some templates to use the prdoc involved in a release and build: - the changelog - a simple draft of audience documentation Since the prdoc presence was enforced in the middle of the version 1.5.0, not all PRs did come with a `prdoc` file. This PR creates all the missing `prdoc` files with some minimum content allowing to properly generate the changelog. The generated content is **not** suitable for the audience documentation. The audience documentation will be possible with the next version, when all PR come with a proper `prdoc`. ## Assumptions - the prdoc files for release `vX.Y.Z` have been moved under `prdoc/X.Y.Z` - the changelog requires for now for the prdoc files to contain author + topic. Thos fields are optional. The build script can be called as: ``` VERSION=X.Y.Z ./scripts/release/build-changelogs.sh ``` Related: - #1408 --------- Co-authored-by:
EgorPopelyaev <[email protected]>
-
- Dec 06, 2023
-
-
Svyatoslav Nikolsky authored
As suggested in this thread: https://github.com/polkadot-fellows/runtimes/pull/87#discussion_r1400237122 We already have the `IsChildSystemParachain`, which may be used at relay chain, but it can't be used at a parachain level. So let's use `AllSiblingSystemParachains` for that. I was thinking about `AllSystemParachains`, but it may cause wrong impression that it can be used at a relay chain level. --------- Co-authored-by:
joe petrowski <[email protected]>
-
Branislav Kontur authored
## Summary This PR aligns Rococo/Westend bridge with latest Bridges repo development: - https://github.com/paritytech/parity-bridges-common/pull/2727 - https://github.com/paritytech/parity-bridges-common/pull/2728 - https://github.com/paritytech/parity-bridges-common/pull/2729 Part of: https://github.com/paritytech/parity-bridges-common/issues/2452
-
Adrian Catangiu authored
# Motivation (+testing) ### Enable easy `ForeignAssets` transfers using `pallet-xcm` We had just previously added capabilities to teleport fees during reserve-based transfers, but what about reserve-transferring fees when needing to teleport some non-fee asset? This PR aligns everything under either explicit reserve-transfer, explicit teleport, or this new flexible `transfer_assets()` which can mix and match as needed with fewer artificial constraints imposed to the user. This will enable, for example, a (non-system) parachain to teleport their `ForeignAssets` assets to AssetHub while using DOT to pay fees. (the assets are teleported - as foreign assets should from their owner chain - while DOT used for fees can only be reserve-based transferred between said parachain and AssetHub). Added `xcm-emulator` tests for this scenario ^. # Description Reverts `(limited_)reserve_transfer_assets` to only allow reserve-based transfers for all `assets` including fees. Similarly `(limited_)teleport_assets` only allows teleports for all `assets` including fees. For complex combinations of asset transfers where assets and fees may have different reserves or different reserve/teleport trust configurations, users can use the newly added `transfer_assets()` extrinsic which is more flexible in allowing more complex scenarios. `assets` (excluding `fees`) must have same reserve location or otherwise be teleportable to `dest`. No limitations imposed on `fees`. - for local reserve: transfer assets to sovereign account of destination chain and forward a notification XCM to `dest` to mint and deposit reserve-based assets to `beneficiary`. - for destination reserve: burn local assets and forward a notification to `dest` chain to withdraw the reserve assets from this chain's sovereign account and deposit them to `beneficiary`. - for remote reserve: burn local assets, forward XCM to reserve chain to move reserves from this chain's SA to `dest` chain's SA, and forward another XCM to `dest` to mint and deposit reserve-based assets to `beneficiary`. - for teleports: burn local assets and forward XCM to `dest` chain to mint/teleport assets and deposit them to `beneficiary`. ## Review notes Only around 500 lines are prod code (see `pallet_xcm/src/lib.rs`), the rest of the PR is new tests and improving existing tests. --------- Co-authored-by: command-bot <>
-
- Dec 05, 2023
-
-
gupnik authored
-
- Dec 04, 2023
-
-
Serban Iorga authored
Removes obsolete fields from the `QueueConfigData` structure. For the remaining fields, if they use the old defaults, we replace them with the new defaults. Resolves: https://github.com/paritytech/polkadot-sdk/issues/1795
-
- Dec 01, 2023
-
-
Liam Aharon authored
Using taplo, fixes all our broken and inconsistent toml formatting and adds CI to keep them tidy. If people want we can customise the format rules as described here https://taplo.tamasfe.dev/configuration/formatter-options.html @ggwpez , I suggest zepter is used only for checking features are propagated, and leave formatting for taplo to avoid duplicate work and conflicts. TODO - [x] Use `exclude = [...]` syntax in taplo file to ignore zombienet tests instead of deleting the dir --------- Signed-off-by:
Oliver Tale-Yazdi <[email protected]> Co-authored-by:
Oliver Tale-Yazdi <[email protected]> Co-authored-by:
Bastian Köcher <[email protected]>
-
- Nov 30, 2023
-
-
dependabot[bot] authored
Bumps the known_good_semver group with 2 updates: [serde](https://github.com/serde-rs/serde) and [clap](https://github.com/clap-rs/clap). Updates `serde` from 1.0.188 to 1.0.193 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/serde/releases">serde's releases</a>.</em></p> <blockquote> <h2>v1.0.193</h2> <ul> <li>Fix field names used for the deserialization of <code>RangeFrom</code> and <code>RangeTo</code> (<a href="https://redirect.github.com/serde-rs/serde/issues/2653">#2653</a>, <a href="https://redirect.github.com/serde-rs/serde/issues/2654">#2654</a>, <a href="https://redirect.github.com/serde-rs/serde/issues/2655">#2655</a>, thanks <a href="https://github.com/emilbonnek"><code>@emilbonnek</code></a>)</li> </ul> <h2>v1.0.192</h2> <ul> <li>Allow internal tag field in untagged variant (<a href="https://redirect.github.com/serde-rs/serde/issues/2646">#2646</a>, thanks <a href="https://github.com/robsdedude"><code>@robsdedude</code></a>)</li> </ul> <h2>v1.0.191</h2> <ul> <li>Documentation improvements</li> </ul> <h2>v1.0.190</h2> <ul> <li>Preserve NaN sign when deserializing f32 from f64 or vice versa (<a href="https://redirect.github.com/serde-rs/serde/issues/2637">#2637</a>)</li> </ul> <h2>v1.0.189</h2> <ul> <li>Fix "cannot infer type" error when internally tagged enum contains untagged variant (<a href="https://redirect.github.com/serde-rs/serde/issues/2613">#2613</a>, thanks <a href="https://github.com/ahl"><code>@ahl</code></a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/serde/commit/44613c7d0190dbb5ecd2d5ec19c636f45b7488cc"><code>44613c7</code></a> Release 1.0.193</li> <li><a href="https://github.com/serde-rs/serde/commit/c706281df3c8d50dba1763f19c856df2746eba6c"><code>c706281</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2655">#2655</a> from dtolnay/rangestartend</li> <li><a href="https://github.com/serde-rs/serde/commit/65d75b8fe3105f00ab2e01537d568d4587167582"><code>65d75b8</code></a> Add RangeFrom and RangeTo tests</li> <li><a href="https://github.com/serde-rs/serde/commit/332b0cba40bcbcc7a6b23a9706277c54791a9856"><code>332b0cb</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2654">#2654</a> from dtolnay/rangestartend</li> <li><a href="https://github.com/serde-rs/serde/commit/8c4af412969086bc8f54fdc2a079d373632e0a03"><code>8c4af41</code></a> Fix more RangeFrom / RangeEnd mixups</li> <li><a href="https://github.com/serde-rs/serde/commit/24a78f071b22ae491eec4127be696ac255b9b5d3"><code>24a78f0</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2653">#2653</a> from emilbonnek/fix/range-to-from-de-mixup</li> <li><a href="https://github.com/serde-rs/serde/commit/c91c33436d7aaef7472ebc18b734ddc9b5bd11fa"><code>c91c334</code></a> Fix Range{From,To} deserialize mixup</li> <li><a href="https://github.com/serde-rs/serde/commit/2083f43a287cac8302009fda5bbe41518dd83209"><code>2083f43</code></a> Update ui test suite to nightly-2023-11-19</li> <li><a href="https://github.com/serde-rs/serde/commit/4676abdc9e6bbbddfb33a00ce8d7e81e92f01120"><code>4676abd</code></a> Release 1.0.192</li> <li><a href="https://github.com/serde-rs/serde/commit/35700eb23e21d8cb198ef4a422ddad13b855ce3b"><code>35700eb</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2646">#2646</a> from robsdedude/fix/2643/allow-tag-field-in-untagged</li> <li>Additional commits viewable in <a href="https://github.com/serde-rs/serde/compare/v1.0.188...v1.0.193">compare view</a></li> </ul> </details> <br /> Updates `clap` from 4.4.6 to 4.4.10 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/releases">clap's releases</a>.</em></p> <blockquote> <h2>v4.4.10</h2> <h2>[4.4.10] - 2023-11-28</h2> <h3>Documentation</h3> <ul> <li>Link out to changelog</li> <li>Cross link derive's attribute reference to derive tutorial</li> </ul> <h2>v4.4.9</h2> <h2>[4.4.9] - 2023-11-27</h2> <h3>Fixes</h3> <ul> <li><em>(help)</em> Show correct <code>Command::about</code> under flattened headings</li> <li><em>(help)</em> Respect <code>hide</code> when flattening subcommands</li> </ul> <h2>v4.4.8</h2> <h2>[4.4.8] - 2023-11-10</h2> <h3>Features</h3> <ul> <li>Add <code>Command::flatten_help</code> to allow <code>git stash -h</code> like help for subcommands</li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's changelog</a>.</em></p> <blockquote> <h2>[4.4.10] - 2023-11-28</h2> <h3>Documentation</h3> <ul> <li>Link out to changelog</li> <li>Cross link derive's attribute reference to derive tutorial</li> </ul> <h2>[4.4.9] - 2023-11-27</h2> <h3>Fixes</h3> <ul> <li><em>(help)</em> Show correct <code>Command::about</code> under flattened headings</li> <li><em>(help)</em> Respect <code>hide</code> when flattening subcommands</li> </ul> <h2>[4.4.8] - 2023-11-10</h2> <h3>Features</h3> <ul> <li>Add <code>Command::flatten_help</code> to allow <code>git stash -h</code> like help for subcommands</li> </ul> <h2>[4.4.7] - 2023-10-24</h2> <h3>Performance</h3> <ul> <li>Reduced code size</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/clap-rs/clap/commit/c0a1814d3c1d93c18faaedc95fd251846e47f4fe"><code>c0a1814</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/c83e681e20b05f7e128088f47f8fcfc44e8ea166"><code>c83e681</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/91bcac4ca9d442786f554abeb7b1ed6d7a464a42"><code>91bcac4</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5230">#5230</a> from epage/migrate</li> <li><a href="https://github.com/clap-rs/clap/commit/030d87505d150345ddd425c1df21c034d2ae7748"><code>030d875</code></a> docs: Link out to the changelog at the relevant tag</li> <li><a href="https://github.com/clap-rs/clap/commit/b661a9de04aebd1adaaafdbf7e470f07a8d8a36d"><code>b661a9d</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5229">#5229</a> from epage/derive</li> <li><a href="https://github.com/clap-rs/clap/commit/a08587b00e347492165ded1415bad6ab339e9f0b"><code>a08587b</code></a> docs(derive): Link to tutorial sections for attributes</li> <li><a href="https://github.com/clap-rs/clap/commit/21b671f689bc0b8d790dc8c42902c22822bf6f82"><code>21b671f</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/93ba76dbaaf9136313a4fe2978693cc39fa467dd"><code>93ba76d</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/c1c55b30d853446e2cab78664c0d22c1b77d4dfd"><code>c1c55b3</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5228">#5228</a> from epage/flat</li> <li><a href="https://github.com/clap-rs/clap/commit/b13f6d98622b80ba30e63c2c6e65d218cc8a4de3"><code>b13f6d9</code></a> fix(help): Hide 'help' if only flattened subcommand</li> <li>Additional commits viewable in <a href="https://github.com/clap-rs/clap/compare/v4.4.6...v4.4.10 ">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by:
dependabot[bot] <[email protected]> Co-authored-by:
dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
-
- Nov 29, 2023
-
-
Dónal Murray authored
Since the Polkadot and Kusama runtimes are no longer in the repo, the relevant systems parachains runtimes also need to be removed. More context [here](https://github.com/paritytech/polkadot-sdk/issues/603) and [here](https://github.com/paritytech/polkadot-sdk/pull/1731). Removes the following: - `asset-hub-kusama` and `asset-hub-polkadot` - `bridge-hub-kusama` and `bridge-hub-polkadot` - `collectives-polkadot` - `glutton-kusama` Partially solves #603 and adds to #1731.
-
Liam Aharon authored
Westend SP dmp queue pallet removal is complete. <img width="1499" alt="Screenshot 2023-11-28 at 08 31 27" src="https://github.com/paritytech/polkadot-sdk/assets/16665596/906246fb-3de9-4133-a827-431636a097ad"> <img width="1499" alt="Screenshot 2023-11-28 at 08 32 08" src="https://github.com/paritytech/polkadot-sdk/assets/16665596/bde84891-b044-42c7-9a0b-59125cd24db1"> <img width="1499" alt="Screenshot 2023-11-28 at 08 31 45" src="https://github.com/paritytech/polkadot-sdk/assets/16665596/38337484-0856-45c0-b9ff-8c785bc3c0e3">
-
- Nov 27, 2023
-
-
Chevdor authored
## Overview This PR aligns the `spec_version` formatting to the [recent changes](https://github.com/polkadot-fellows/runtimes/pull/26/files#diff-efa4caeb17487ecb13d8f5eb7863c3241d84afa2e73fbf25909a2ca89df0f362R142 ) made for the Polkadot/Kusama runtimes. It also backports the latest version `v1.4.0` bumps as `1_004_000`. ## Details During the switch from `v0.9` to `v1.x`, the format of the `spec_version` was modified from: `(M)m_ppp` for a runtime considered on version `M.m.pp`. For instance `0.9.42` had a `spec_version` of `9420`. With the transition to `v1.x`, the format was changed to a bigger number (still `u32`) formatted as `MM_mm_ppp` where `1.2.3` would be stored as `01_02_003`. This PR aligns the format with that has been introduced in the fellowship repo: `MMM_mmm_ppp`. --------- Co-authored-by:
Bastian Köcher <[email protected]>
-
- Nov 24, 2023
-
-
Liam Aharon authored
DMP queue migration is complete and the pallet should be removed to fix the check runtime upgrade CI. <img width="1501" alt="Screenshot 2023-11-24 at 16 05 37" src="https://github.com/paritytech/polkadot-sdk/assets/16665596/ee1da6bb-2756-4423-8085-1e4c73553ad5"> <img width="1501" alt="Screenshot 2023-11-24 at 16 06 44" src="https://github.com/paritytech/polkadot-sdk/assets/16665596/03f3e88f-aed8-4eaa-aab6-7998f72258be">
-
- Nov 17, 2023
-
-
Branislav Kontur authored
This PR fixes two things: - relax `force_default_xcm_version` for testnet system parachains (e.g. BridgeHubWestend has now 2 and there is no way to change it to 3, so we need to call `force_xcm_version(3)` for every parachain that it is connected to, because we send XCMv3 messages) - add `Storage` item to `PolkadotXcm` pallet definition (now we cannot see storage items for `pallet_xcm` in PJS) ## TODO - [ ] when merged open PR to `polkadot-fellows/runtimes` repo
-
- Nov 16, 2023
-
-
joe petrowski authored
Missed in https://github.com/paritytech/polkadot-sdk/pull/1672
-
- Nov 15, 2023
-
-
Branislav Kontur authored
Rococo<>Wococo bridge is replaced by Rococo<Westend bridge, so this PR removes unneeded code. - [x] update bridges subtree after https://github.com/paritytech/parity-bridges-common/pull/2692 --------- Co-authored-by: command-bot <> Co-authored-by:
Svyatoslav Nikolsky <[email protected]>
-
Adrian Catangiu authored
Refunding surplus happens anyway on xcm_executor::post_process(), automatically refunding surplus to original_origin at the end of execution. Since SovereignPaidRemoteExporter doesn't ClearOrigin, it can simply rely on the automatic mechanism. Furthermore, RefundSurplus instruction refunds _surplus_. Surplus exists only as a result of Transact, SetErrorHandler or SetAppendix instructions, none of which being part of the SovereignPaidRemoteExporter XCM program. So surplus is always zero here anyway.
-
- Nov 14, 2023
-
-
georgepisaltu authored
Fixes https://github.com/paritytech/polkadot-sdk/issues/106 Port of cumulus PR https://github.com/paritytech/cumulus/pull/2960 This PR adds the ability to bid for collator slots even after the max number of collators have already registered. This eliminates the first come, first served mechanism that was in place before. Key changes: - added `update_bond` extrinsic to allow registered candidates to adjust their bonds in order to dynamically control their bids - added `take_candidate_slot` extrinsic to try to replace an already existing candidate by bidding more than them - candidates are now kept in a sorted list in the pallet storage, where the top `DesiredCandidates` out of `MaxCandidates` candidates in the list will be selected by the session pallet as collators - if the candidacy bond is increased through a `set_candidacy_bond` call, candidates which don't meet the new bond requirements are kicked # Checklist - [ ] My PR includes a detailed description as outlined in the "Description" section above - [ ] My PR follows the [labeling requirements](https://github.com/paritytech/polkadot-sdk/blob/master/docs/CONTRIBUTING.md#process ) of this project (at minimum one label for `T` required) - [ ] I have made corresponding changes to the documentation (if applicable) - [ ] I have added tests that prove my fix is effective or that my feature works (if applicable) - [ ] If this PR alters any external APIs or interfaces used by Polkadot, the corresponding Polkadot PR is ready as well as the corresponding Cumulus PR (optional) --------- Signed-off-by:
georgepisaltu <[email protected]>
-