Skip to content
  1. Feb 02, 2024
  3. Jan 31, 2024
    • Branislav Kontur's avatar
      [frame] `#[pallet::composite_enum]` improved variant count handling + removed... · bb8ddc46
      Branislav Kontur authored 
      [frame] `#[pallet::composite_enum]` improved variant count handling + removed `pallet_balances`'s `MaxHolds` config (#2657)

I started this investigation/issue based on @liamaharon question
[here](https://github.com/paritytech/polkadot-sdk/pull/1801#discussion_r1410452499).

## Problem

The `pallet_balances` integrity test should correctly detect that the
runtime has correct distinct `HoldReasons` variant count. I assume the
same situation exists for RuntimeFreezeReason.

It is not a critical problem, if we set `MaxHolds` with a sufficiently
large value, everything should be ok. However, in this case, the
integrity_test check becomes less useful.

**Situation for "any" runtime:**
- `HoldReason` enums from different pallets:
```rust
        /// from pallet_nis
        #[pallet::composite_enum]
	pub enum HoldReason {
		NftReceipt,
	}

        /// from pallet_preimage
        #[pallet::composite_enum]
	pub enum HoldReason {
		Preimage,
	}

        // from pallet_state-trie-migration
        #[pallet::composite_enum]
	pub enum HoldReason {
		SlashForContinueMigrate,
		SlashForMigrateCustomTop,
		SlashForMigrateCustomChild,
	}
```

- generated `RuntimeHoldReason` enum looks like:
```rust
pub enum RuntimeHoldReason {

    #[codec(index = 32u8)]
    Preimage(pallet_preimage::HoldReason),

    #[codec(index = 38u8)]
    Nis(pallet_nis::HoldReason),

    #[codec(index = 42u8)]
    StateTrieMigration(pallet_state_trie_migration::HoldReason),
}
```

- composite enum `RuntimeHoldReason` variant count is detected as `3`
- we set `type MaxHolds = ConstU32<3>`
- `pallet_balances::integrity_test` is ok with `3`(at least 3)

However, the real problem can occur in a live runtime where some
functionality might stop working. This is due to a total of 5 distinct
hold reasons (for pallets with multi-instance support, it is even more),
and not all of them can be used because of an incorrect `MaxHolds`,
which is deemed acceptable according to the `integrity_test`:
  ```
  // pseudo-code - if we try to call all of these:

T::Currency::hold(&pallet_nis::HoldReason::NftReceipt.into(),
&nft_owner, deposit)?;
T::Currency::hold(&pallet_preimage::HoldReason::Preimage.into(),
&nft_owner, deposit)?;

T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForContinueMigrate.into(),
&nft_owner, deposit)?;

  // With `type MaxHolds = ConstU32<3>` these two will fail

T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomTop.into(),
&nft_owner, deposit)?;

T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomChild.into(),
&nft_owner, deposit)?;
  ```  


## Solutions

A macro `#[pallet::*]` expansion is extended of `VariantCount`
implementation for the `#[pallet::composite_enum]` enum type. This
expansion generates the `VariantCount` implementation for pallets'
`HoldReason`, `FreezeReason`, `LockId`, and `SlashReason`. Enum variants
must be plain enum values without fields to ensure a deterministic
count.

The composite runtime enum, `RuntimeHoldReason` and
`RuntimeFreezeReason`, now sets `VariantCount::VARIANT_COUNT` as the sum
of pallets' enum `VariantCount::VARIANT_COUNT`:
```rust
#[frame_support::pallet(dev_mode)]
mod module_single_instance {

	#[pallet::composite_enum]
	pub enum HoldReason {
		ModuleSingleInstanceReason1,
		ModuleSingleInstanceReason2,
	}
...
}

#[frame_support::pallet(dev_mode)]
mod module_multi_instance {

	#[pallet::composite_enum]
	pub enum HoldReason<I: 'static = ()> {
		ModuleMultiInstanceReason1,
		ModuleMultiInstanceReason2,
		ModuleMultiInstanceReason3,
	}
...
}


impl self::sp_api_hidden_includes_construct_runtime::hidden_include::traits::VariantCount
    for RuntimeHoldReason
{
    const VARIANT_COUNT: u32 = 0
        + module_single_instance::HoldReason::VARIANT_COUNT
        + module_multi_instance::HoldReason::<module_multi_instance::Instance1>::VARIANT_COUNT
        + module_multi_instance::HoldReason::<module_multi_instance::Instance2>::VARIANT_COUNT
        + module_multi_instance::HoldReason::<module_multi_instance::Instance3>::VARIANT_COUNT;
}
```

In addition, `MaxHolds` is removed (as suggested
[here](https://github.com/paritytech/polkadot-sdk/pull/2657#discussion_r1443324573))
from `pallet_balances`, and its `Holds` are now bounded to
`RuntimeHoldReason::VARIANT_COUNT`. Therefore, there is no need to let
the runtime specify `MaxHolds`.


## For reviewers

Relevant changes can be found here:
- `substrate/frame/support/procedural/src/lib.rs` 
-  `substrate/frame/support/procedural/src/pallet/parse/composite.rs`
-  `substrate/frame/support/procedural/src/pallet/expand/composite.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/composite_helper.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/hold_reason.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/freeze_reason.rs`
- `substrate/frame/support/src/traits/misc.rs`

And the rest of the files is just about removed `MaxHolds` from
`pallet_balances`

## Next steps

Do the same for `MaxFreezes`
https://github.com/paritytech/polkadot-sdk/issues/2997

.

---------

Co-authored-by: command-bot <>
Co-authored-by: default avatarBastian Köcher <[email protected]>
Co-authored-by: default avatarDónal Murray <[email protected]>
Co-authored-by: default avatargupnik <[email protected]>
      bb8ddc46
    • Branislav Kontur's avatar
      [cumulus] `parachains-common` testnet constants cleaning (#3134) · 4450b615
      Branislav Kontur authored 
      The `parachains-common` contains a lots of constants and type
definitions which are used for `polkadot-sdk`'s testnet runtimes and
also for `polkadot-fellows`'s production [SP
runtimes](https://github.com/polkadot-fellows/runtimes/tree/main/system-parachains/constants).
This PR cleans `parachains-common` module to contain only common and
generic functionality.

Testnet-specific constants have been moved to the separate module
dedicated just for testnets:
`polkadot-sdk/cumulus/parachains/runtimes/constants/`


Part of: https://github.com/paritytech/polkadot-sdk/issues/3054



---------

Co-authored-by: default avatargeorgepisaltu <[email protected]>
      4450b615
  5. Jan 30, 2024
  7. Jan 29, 2024
  9. Jan 24, 2024
  11. Jan 23, 2024
  13. Jan 22, 2024
  15. Jan 18, 2024
  17. Jan 17, 2024
  19. Jan 16, 2024
    • Francisco Aguirre's avatar
      XCMv4 (#1230) · 8428f678
      Francisco Aguirre authored 
      

# Note for reviewer

Most changes are just syntax changes necessary for the new version.
Most important files should be the ones under the `xcm` folder.

# Description 

Added XCMv4.

## Removed `Multi` prefix
The following types have been renamed:
- MultiLocation -> Location
- MultiAsset -> Asset
- MultiAssets -> Assets
- InteriorMultiLocation -> InteriorLocation
- MultiAssetFilter -> AssetFilter
- VersionedMultiAsset -> VersionedAsset
- WildMultiAsset -> WildAsset
- VersionedMultiLocation -> VersionedLocation

In order to fix a name conflict, the `Assets` in `xcm-executor` were
renamed to `HoldingAssets`, as they represent assets in holding.

## Removed `Abstract` asset id

It was not being used anywhere and this simplifies the code.

Now assets are just constructed as follows:

```rust
let asset: Asset = (AssetId(Location::new(1, Here)), 100u128).into();
```

No need for specifying `Concrete` anymore.

## Outcome is now a named fields struct

Instead of

```rust
pub enum Outcome {
  Complete(Weight),
  Incomplete(Weight, Error),
  Error(Error),
}
```

we now have

```rust
pub enum Outcome {
  Complete { used: Weight },
  Incomplete { used: Weight, error: Error },
  Error { error: Error },
}
```

## Added Reanchorable trait

Now both locations and assets implement this trait, making it easier to
reanchor both.

## New syntax for building locations and junctions

Now junctions are built using the following methods:

```rust
let location = Location {
    parents: 1,
    interior: [Parachain(1000), PalletInstance(50), GeneralIndex(1984)].into()
};
```

or

```rust
let location = Location::new(1, [Parachain(1000), PalletInstance(50), GeneralIndex(1984)]);
```

And they are matched like so:

```rust
match location.unpack() {
  (1, [Parachain(id)]) => ...
  (0, Here) => ...,
  (1, [_]) => ...,
}
```

This syntax is mandatory in v4, and has been also implemented for v2 and
v3 for easier migration.

This was needed to make all sizes smaller.

# TODO
- [x] Scaffold v4
- [x] Port github.com/paritytech/polkadot/pull/7236
- [x] Remove `Multi` prefix
- [x] Remove `Abstract` asset id

---------

Co-authored-by: command-bot <>
Co-authored-by: default avatarKeith Yeung <[email protected]>
      8428f678
  21. Jan 10, 2024
    • joe petrowski's avatar
      Unique Usernames in Identity Pallet (#2651) · d1f678c0
      joe petrowski authored 
      

This PR allows _username authorities_ to issue unique usernames that
correspond with an account. It also provides two-way lookup, that is
from `AccountId` to a single, "primary" `Username` (alongside
`Registration`) and multiple unique `Username`s to an `AccountId`.

Key features:

- Username Authorities added (and removed) via privileged origin.
- Authorities have a `suffix` and an `allocation`. They can grant up to
`allocation` usernames. Their `suffix` will be appended to the usernames
that they issue. A suffix may be up to 7 characters long.
- Users can ask an authority to grant them a username. This will take
the form `myusername.suffix`. The entire name (including suffix) must be
less than or equal to 32 alphanumeric characters.
- Users can approve a username for themselves in one of two ways (that
is, authorities cannot grant them arbitrarily):
- Pre-sign the entire username (including suffix) with a secret key that
corresponds to their `AccountId` (for keyed accounts, obviously); or
- Accept the username after it has been granted by an authority (it will
be queued until accepted) (for non-keyed accounts like pure proxies or
multisigs).
- The system does not require any funds or deposits. Users without an
identity will be given a default one (presumably all fields set to
`None`). If they update this info, they will need to place the normal
storage deposit.
- If a user does not have any username, their first one will be set as
`Primary`, and their `AccountId` will map to that one. If they get
subsequent usernames, they can choose which one to be their primary via
`set_primary_username`.
- There are some state cleanup functions to remove expired usernames
that have not been accepted and dangling usernames whose owners have
called `clear_identity`.

TODO:

- [x] Add migration to runtimes
- [x] Probably do off-chain migration into People Chain genesis
- [x] Address a few TODO questions in code (please review)

---------

Co-authored-by: default avatarLiam Aharon <[email protected]>
Co-authored-by: default avatarGonçalo Pestana <[email protected]>
Co-authored-by: default avatarOliver Tale-Yazdi <[email protected]>
Co-authored-by: default avatarDónal Murray <[email protected]>
      d1f678c0
  23. Jan 07, 2024
  25. Jan 05, 2024
  27. Jan 04, 2024
  29. Dec 22, 2023