## Summary

This pull request proposes a solution for improved control of the
versioned XCM flow over the bridge (across different consensus chains)
and resolves the situation where the sending chain/consensus has already
migrated to a higher XCM version than the receiving chain/consensus.

## Problem/Motivation

The current flow over the bridge involves a transfer from AssetHubRococo
(AHR) to BridgeHubRococo (BHR) to BridgeHubWestend (BHW) and finally to
AssetHubWestend (AHW), beginning with a reserve-backed transfer on AHR.

In this process:
1. AHR sends XCM `ExportMessage` through `XcmpQueue`, incorporating XCM
version checks using the `WrapVersion` feature, influenced by
`pallet_xcm::SupportedVersion` (managed by
`pallet_xcm::force_xcm_version` or version discovery).

2. BHR handles the `ExportMessage` instruction, utilizing the latest XCM
version. The `HaulBlobExporter` converts the inner XCM to
[`VersionedXcm::from`](https://github.com/paritytech/polkadot-sdk/blob/63ac2471/polkadot/xcm/xcm-builder/src/universal_exports.rs#L465-L467),
also using the latest XCM version.

However, challenges arise:
- Incompatibility when BHW uses a different version than BHR. For
instance, if BHR migrates to **XCMv4** while BHW remains on **XCMv3**,
BHR's `VersionedXcm::from` uses `VersionedXcm::V4` variant, causing
encoding issues for BHW.
  ```
	/// Just a simulation of possible error, which could happen on BHW
	/// (this code is based on actual master without XCMv4)
	let encoded = hex_literal::hex!("0400");
	println!("{:?}", VersionedXcm::<()>::decode(&mut &encoded[..]));

Err(Error { cause: None, desc: "Could not decode `VersionedXcm`, variant
doesn't exist" })
  ``` 
- Similar compatibility issues exist between AHR and AHW.

## Solution

This pull request introduces the following solutions:

1. **New trait `CheckVersion`** - added to the `xcm` module and exposing
`pallet_xcm::SupportedVersion`. This enhancement allows checking the
actual XCM version for desired destinations outside of the `pallet_xcm`
module.

2. **Version Check in `HaulBlobExporter`** uses `CheckVersion` to check
known/configured destination versions, ensuring compatibility. For
example, in the scenario mentioned, BHR can store the version `3` for
BHW. If BHR is on XCMv4, it will attempt to downgrade the message to
version `3` instead of using the latest version `4`.

3. **Version Check in `pallet-xcm-bridge-hub-router`** - this check
ensures compatibility with the real destination's XCM version,
preventing the unnecessary sending of messages to the local bridge hub
if versions are incompatible.

These additions aim to improve the control and compatibility of XCM
flows over the bridge and addressing issues related to version
mismatches.

## Possible alternative solution

_(More investigation is needed, and at the very least, it should extend
to XCMv4/5. If this proves to be a viable option, I can open an RFC for
XCM.)._

Add the `XcmVersion` attribute to the `ExportMessage` so that the
sending chain can determine, based on what is stored in
`pallet_xcm::SupportedVersion`, the version the destination is using.
This way, we may not need to handle the version in `HaulBlobExporter`.

```
ExportMessage {
	network: NetworkId,
	destination: InteriorMultiLocation,
	xcm: Xcm<()>
	destination_xcm_version: Version, // <- new attritbute
},
```

```
pub trait ExportXcm {
        fn validate(
		network: NetworkId,
		channel: u32,
		universal_source: &mut Option<InteriorMultiLocation>,
		destination: &mut Option<InteriorMultiLocation>,
		message: &mut Option<Xcm<()>>,
                destination_xcm_version: Version, , // <- new attritbute
	) -> SendResult<Self::Ticket>;
```

## Future Directions

This PR does not fix version discovery over bridge, further
investigation will be conducted here:
https://github.com/paritytech/polkadot-sdk/issues/2417.

## TODO

- [x] `pallet_xcm` mock for tests uses hard-coded XCM version `2` -
change to 3 or lastest?
- [x] fix `pallet-xcm-bridge-hub-router`
- [x] fix HaulBlobExporter with version determination
[here](https://github.com/paritytech/polkadot-sdk/blob/2183669d/polkadot/xcm/xcm-builder/src/universal_exports.rs#L465)
- [x] add unit-tests to the runtimes
- [x] run benchmarks for `ExportMessage`
- [x] extend local run scripts about `force_xcm_version(dest, version)`
- [ ] when merged, prepare governance calls for Rococo/Westend
- [ ] add PRDoc

Part of: https://github.com/paritytech/parity-bridges-common/issues/2719

---------

Co-authored-by: command-bot <>

This PR introduces a script and some templates to use the prdoc involved
in a release and build:
- the changelog
- a simple draft of audience documentation

Since the prdoc presence was enforced in the middle of the version
1.5.0, not all PRs did come with a `prdoc` file.
This PR creates all the missing `prdoc` files with some minimum content
allowing to properly generate the changelog.
The generated content is **not** suitable for the audience
documentation.

The audience documentation will be possible with the next version, when
all PR come with a proper `prdoc`.

## Assumptions

- the prdoc files for release `vX.Y.Z` have been moved under
`prdoc/X.Y.Z`
- the changelog requires for now for the prdoc files to contain author +
topic. Thos fields are optional.

The build script can  be called as:
```
VERSION=X.Y.Z ./scripts/release/build-changelogs.sh
```

Related:
-  #1408

---------

Co-authored-by: EgorPopelyaev <[email protected]>

Bumps the known_good_semver group with 2 updates:
[clap](https://github.com/clap-rs/clap) and
[syn](https://github.com/dtolnay/syn).

Updates `clap` from 4.4.10 to 4.4.11
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/releases">clap's
releases</a>.</em></p>
<blockquote>
<h2>v4.4.11</h2>
<h2>[4.4.11] - 2023-12-04</h2>
<h3>Features</h3>
<ul>
<li>Add <code>Command::mut_group</code></li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.4.11] - 2023-12-04</h2>
<h3>Features</h3>
<ul>
<li>Add <code>Command::mut_group</code></li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/d092896d61fd73a5467db85eac035a9ce2ddbc60"><code>d092896</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/c76a713f8bd40a54a58e8c1d2300a6792f1b79d5"><code>c76a713</code></a>
chore: Update lockfile</li>
<li><a
href="https://github.com/clap-rs/clap/commit/b99d17bb0b78b667659982252e8973174e93ae7d"><code>b99d17b</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/b47f8da4d857dd653915ce772757d4b996a36477"><code>b47f8da</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5247">#5247</a>
from epage/group</li>
<li><a
href="https://github.com/clap-rs/clap/commit/2e7c9d11a84b5008e2b42b4df323557a31bb0337"><code>2e7c9d1</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5194">#5194</a>
from c19/patch-1</li>
<li><a
href="https://github.com/clap-rs/clap/commit/37917be0b75d5cd667cd37db6ea5c6bac837c674"><code>37917be</code></a>
feat: Add Command::mut_group</li>
<li><a
href="https://github.com/clap-rs/clap/commit/cf7a0272cc1d55d139983d4408e8bedab51338ad"><code>cf7a027</code></a>
chore: Update from '_rust/main'</li>
<li><a
href="https://github.com/clap-rs/clap/commit/8c836eaa9d9279df467991a3b8463d748b515a0a"><code>8c836ea</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/10">#10</a> from
epage/renovate/migrate-config</li>
<li><a
href="https://github.com/clap-rs/clap/commit/598c6244983fb392457f3fbec9badf25fab6d051"><code>598c624</code></a>
chore(config): migrate config .github/renovate.json5</li>
<li>See full diff in <a
href="https://github.com/clap-rs/clap/compare/v4.4.10...v4.4.11">compare
view</a></li>
</ul>
</details>
<br />

Updates `syn` from 2.0.39 to 2.0.40
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/syn/releases">syn's
releases</a>.</em></p>
<blockquote>
<h2>2.0.40</h2>
<ul>
<li>Fix some edge cases of handling None-delimited groups in expression
parser (<a
href="https://redirect.github.com/dtolnay/syn/issues/1539">#1539</a>, <a
href="https://redirect.github.com/dtolnay/syn/issues/1541">#1541</a>, <a
href="https://redirect.github.com/dtolnay/syn/issues/1542">#1542</a>, <a
href="https://redirect.github.com/dtolnay/syn/issues/1543">#1543</a>, <a
href="https://redirect.github.com/dtolnay/syn/issues/1544">#1544</a>, <a
href="https://redirect.github.com/dtolnay/syn/issues/1545">#1545</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/syn/commit/cf7f40a96a7329fb4215a7a1d8d9e7c93439b169"><code>cf7f40a</code></a>
Release 2.0.40</li>
<li><a
href="https://github.com/dtolnay/syn/commit/1ce8ccf5cd92824d1058019c0ae95b0616f6ac01"><code>1ce8ccf</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1538">#1538</a>
from dtolnay/testinvisible</li>
<li><a
href="https://github.com/dtolnay/syn/commit/d06bff8883e794c0d9d5fe2998210dec113b6eff"><code>d06bff8</code></a>
Add test for parsing Delimiter::None in expressions</li>
<li><a
href="https://github.com/dtolnay/syn/commit/9ec66d42bba0da0041ab6448604b72f673e185f1"><code>9ec66d4</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1545">#1545</a>
from dtolnay/groupedlet</li>
<li><a
href="https://github.com/dtolnay/syn/commit/384621acc640779ee4a8250317c26a42e8ceef90"><code>384621a</code></a>
Fix None-delimited let expression in stmt position</li>
<li><a
href="https://github.com/dtolnay/syn/commit/5325b6d1711c1c9c6787cb6239b472b5f8b5daaf"><code>5325b6d</code></a>
Add test of let expr surrounded in None-delimited group</li>
<li><a
href="https://github.com/dtolnay/syn/commit/0ddfc27cf79573db0b5533c583ff895e9c7f3f72"><code>0ddfc27</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1544">#1544</a>
from dtolnay/nonedelimloop</li>
<li><a
href="https://github.com/dtolnay/syn/commit/9c99b3f62ecebb2ac22f8ed99039934b0a18d0e6"><code>9c99b3f</code></a>
Fix stmt boundary after None-delimited group containing loop</li>
<li><a
href="https://github.com/dtolnay/syn/commit/2781584ea868cce6c9ae750bc442e3b4b2dfd887"><code>2781584</code></a>
Add test of None-delimited group containing loop in match arm</li>
<li><a
href="https://github.com/dtolnay/syn/commit/d33292808432c8530b53c951f2780d7128c4bd0b"><code>d332928</code></a>
Simplify token stream construction in Delimiter::None tests</li>
<li>Additional commits viewable in <a
href="https://github.com/dtolnay/syn/compare/2.0.39...2.0.40">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Treasury Pallet Instance for the Fellowship in Westend Collectives.

In this update, we present a Treasury Pallet Instance that is under the
control of the Fellowship body, with oversight from the Root and
Treasurer origins. Here's how it is governed:
- the Root origin have the authority to reject or approve spend
proposals, with no amount limit for approvals.
- the Treasurer origin have the authority to reject or approve spend
proposals, with approval limits of up to 10,000,000 DOT.
- Voice of all Fellows ranked at 3 or above can reject or approve spend
proposals, with a maximum approval limit of 10,000 DOT.
- Voice of Fellows ranked at 4 or above can also reject or approve spend
proposals, with a maximum approval limit of 10,000,000 DOT.

Additionally, we introduce the Asset Rate Pallet Instance to establish
conversion rates from asset A to B. This is used to determine if a
proposed spend amount involving a non-native asset is permissible by the
commanding origin. The rates can be set up by the Root, Treasurer
origins, or Voice of all Fellows.

---------

Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: joepetrowski <[email protected]>

`polkadot-sdk` version of original tasks PR located here:
https://github.com/paritytech/substrate/pull/14329

Fixes #206

## Status
- [x] Generic `Task` trait
- [x] `RuntimeTask` aggregated enum, compatible with
`construct_runtime!`
- [x] Casting between `Task` and `RuntimeTask` without needing `dyn` or
`Box`
- [x] Tasks Example pallet
- [x] Runtime tests for Tasks example pallet
- [x] Parsing for task-related macros
- [x] Retrofit parsing to make macros optional
- [x] Expansion for task-related macros
- [x] Adds support for args in tasks
- [x] Retrofit tasks example pallet to use macros instead of manual
syntax
- [x] Weights
- [x] Cleanup
- [x] UI tests
- [x] Docs

## Target Syntax
Adapted from
https://github.com/paritytech/polkadot-sdk/issues/206#issue-1865172283

```rust
// NOTE: this enum is optional and is auto-generated by the other macros if not present
#[pallet::task]
pub enum Task<T: Config> {
    AddNumberIntoTotal {
        i: u32,
    }
}

/// Some running total.
#[pallet::storage]
pub(super) type Total<T: Config<I>, I: 'static = ()> =
StorageValue<_, (u32, u32), ValueQuery>;

/// Numbers to be added into the total.
#[pallet::storage]
pub(super) type Numbers<T: Config<I>, I: 'static = ()> =
StorageMap<_, Twox64Concat, u32, u32, OptionQuery>;

#[pallet::tasks_experimental]
impl<T: Config<I>, I: 'static> Pallet<T, I> {
	/// Add a pair of numbers into the totals and remove them.
	#[pallet::task_list(Numbers::<T, I>::iter_keys())]
	#[pallet::task_condition(|i| Numbers::<T, I>::contains_key(i))]
	#[pallet::task_index(0)]
	pub fn add_number_into_total(i: u32) -> DispatchResult {
		let v = Numbers::<T, I>::take(i).ok_or(Error::<T, I>::NotFound)?;
		Total::<T, I>::mutate(|(total_keys, total_values)| {
			*total_keys += i;
			*total_values += v;
		});
		Ok(())
	}
}
```

---------

Co-authored-by: Nikhil Gupta <[email protected]>
Co-authored-by: kianenigma <[email protected]>
Co-authored-by: Nikhil Gupta <>
Co-authored-by: Gavin Wood <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: gupnik <[email protected]>

`testnets-common` was introduced recently to start to separate testnet
parachain configurations from those of Polkadot and Kusama.

The `locks-review` and `polkadot-review` requirements are removed from
`parachains-common` in
https://github.com/paritytech/polkadot-sdk/pull/2564 and there are
[plans](https://github.com/paritytech/polkadot-sdk/pull/2564#discussion_r1410882115)
to move the Polkadot and Kusama contents of that package to the
fellowship, `testnets-common` is no longer needed.

This PR removes the crate and replaces uses of it in
`collectives-westend`, the only place it is currently used.

Closes https://github.com/paritytech/polkadot-sdk/issues/2319

Changes:
- Ensure that only `enqueue_message(s)` is callable from within the
message processor. This prevents messed up storage that can currently
happen when the pallet is called into recursively.
- Use `H256` instead of `[u8; 32]` for clearer API.

## Details

The re-entracy check is done with the `environmental` crate by adding a
`with_service_mutex(f)` function that runs the closure exclusively. This
works since the MQ pallet is not instantiable.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>

As suggested in this thread:
https://github.com/polkadot-fellows/runtimes/pull/87#discussion_r1400237122

We already have the `IsChildSystemParachain`, which may be used at relay
chain, but it can't be used at a parachain level. So let's use
`AllSiblingSystemParachains` for that. I was thinking about
`AllSystemParachains`, but it may cause wrong impression that it can be
used at a relay chain level.

---------

Co-authored-by: joe petrowski <[email protected]>

## Summary

This PR aligns Rococo/Westend bridge with latest Bridges repo
development:
- https://github.com/paritytech/parity-bridges-common/pull/2727
- https://github.com/paritytech/parity-bridges-common/pull/2728
- https://github.com/paritytech/parity-bridges-common/pull/2729




Part of: https://github.com/paritytech/parity-bridges-common/issues/2452

# Motivation (+testing)

### Enable easy `ForeignAssets` transfers using `pallet-xcm` 

We had just previously added capabilities to teleport fees during
reserve-based transfers, but what about reserve-transferring fees when
needing to teleport some non-fee asset?

This PR aligns everything under either explicit reserve-transfer,
explicit teleport, or this new flexible `transfer_assets()` which can
mix and match as needed with fewer artificial constraints imposed to the
user.

This will enable, for example, a (non-system) parachain to teleport
their `ForeignAssets` assets to AssetHub while using DOT to pay fees.
(the assets are teleported - as foreign assets should from their owner
chain - while DOT used for fees can only be reserve-based transferred
between said parachain and AssetHub).

Added `xcm-emulator` tests for this scenario ^.

# Description

Reverts `(limited_)reserve_transfer_assets` to only allow reserve-based
transfers for all `assets` including fees.

Similarly `(limited_)teleport_assets` only allows teleports for all
`assets` including fees.
    
For complex combinations of asset transfers where assets and fees may
have different reserves or different reserve/teleport trust
configurations, users can use the newly added `transfer_assets()`
extrinsic which is more flexible in allowing more complex scenarios.

`assets` (excluding `fees`) must have same reserve location or otherwise
be teleportable to `dest`.
No limitations imposed on `fees`.

- for local reserve: transfer assets to sovereign account of destination
chain and forward a notification XCM to `dest` to mint and deposit
reserve-based assets to `beneficiary`.
- for destination reserve: burn local assets and forward a notification
to `dest` chain to withdraw the reserve assets from this chain's
sovereign account and deposit them to `beneficiary`.
- for remote reserve: burn local assets, forward XCM to reserve chain to
move reserves from this chain's SA to `dest` chain's SA, and forward
another XCM to `dest` to mint and deposit reserve-based assets to
`beneficiary`.
- for teleports: burn local assets and forward XCM to `dest` chain to
mint/teleport assets and deposit them to `beneficiary`.

## Review notes

Only around 500 lines are prod code (see `pallet_xcm/src/lib.rs`), the
rest of the PR is new tests and improving existing tests.

---------

Co-authored-by: command-bot <>

Co-authored-by: Javier Viola <[email protected]>

This PR is a continuation of
https://github.com/paritytech/polkadot-sdk/pull/2102 and part of an
initiative started here https://hackmd.io/@romanp/rJ318ZCEp
What has been done:
- The content under `docs/*` (with the exception of `docs/mermaid`) has
been moved to `docs/contributor/`
- Developer Hub has been renamed to Polkadot SDK Docs, and the crate has
been renamed from `developer-hub` to `polkadot-sdk-docs`
- The content under `developer-hub/*` has been moved to `docs/sdk`

---
Original PR https://github.com/paritytech/polkadot-sdk/pull/2565, it has
been close due to too many rebase conflicts

---------

Co-authored-by: Serban Iorga <[email protected]>
Co-authored-by: Chevdor <[email protected]>
Co-authored-by: Egor_P <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

Smoldot sometimes stops reporting finalized blocks to us. Since we are
recovering from the relay chain with a huge delay on full nodes, we can
not rely on import notifications to set the best block. Because
sometimes we also do not receive finality notifications, the height
check in zombienet fails.

Proper solution is to update smoldot, there have been some changes since
the version we use. But upgrade is blocked by version conflict which
will be resolved with
https://github.com/paritytech/polkadot-sdk/pull/1631.

Improved max message size logic and added test for it

---------

Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: command-bot <>

Removes obsolete fields from the `QueueConfigData` structure. For the
remaining fields, if they use the old defaults, we replace them with the
new defaults.

Resolves: https://github.com/paritytech/polkadot-sdk/issues/1795

Bumps the known_good_semver group with 1 update:
[syn](https://github.com/dtolnay/syn).

Updates `syn` from 2.0.38 to 2.0.39
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/syn/releases">syn's
releases</a>.</em></p>
<blockquote>
<h2>2.0.39</h2>
<ul>
<li>Fix parsing of return expression in match guards (<a
href="https://redirect.github.com/dtolnay/syn/issues/1528">#1528</a>)</li>
<li>Improve error message on labeled loop as value expression for break
(<a
href="https://redirect.github.com/dtolnay/syn/issues/1531">#1531</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/syn/commit/924217c1734c085ee6cdb5e198d36d610c234313"><code>924217c</code></a>
Release 2.0.39</li>
<li><a
href="https://github.com/dtolnay/syn/commit/95aeeb559866368d8b910d388c8e04b96083666a"><code>95aeeb5</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1531">#1531</a>
from dtolnay/breaklabel</li>
<li><a
href="https://github.com/dtolnay/syn/commit/b88f86fae5c1ac284179181bf7a34549e6d96d7c"><code>b88f86f</code></a>
Ignore single_element_loop clippy lint in test</li>
<li><a
href="https://github.com/dtolnay/syn/commit/a876185366557cb0e0e175c3be48721c8cc0d8e6"><code>a876185</code></a>
Improve error on break followed by labeled loop</li>
<li><a
href="https://github.com/dtolnay/syn/commit/32ab9794d6b75248c1946ae18baab12a46137eb0"><code>32ab979</code></a>
Add test of ambiguous label parsing in break</li>
<li><a
href="https://github.com/dtolnay/syn/commit/6f658f88a213e25b7ac7ec2dc77c537de679b745"><code>6f658f8</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1530">#1530</a>
from dtolnay/canbeginexpr</li>
<li><a
href="https://github.com/dtolnay/syn/commit/20497e1a555812cfe05769b4d8c117c4e0e4edbd"><code>20497e1</code></a>
More precise decision to parse expression after return keyword</li>
<li><a
href="https://github.com/dtolnay/syn/commit/c6a651aa12447d50c22db3189ef38cff90fc267b"><code>c6a651a</code></a>
Update name of ExprReturn parse function to match variant name</li>
<li><a
href="https://github.com/dtolnay/syn/commit/c2745901009f7d65e7b708cd80031642038f765e"><code>c274590</code></a>
Indicate that peek argument refers to syn::Ident</li>
<li><a
href="https://github.com/dtolnay/syn/commit/3e67cb0c660fc906770d212465652bfeb7a75727"><code>3e67cb0</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1529">#1529</a>
from dtolnay/up</li>
<li>Additional commits viewable in <a
href="https://github.com/dtolnay/syn/compare/2.0.38...2.0.39">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=syn&package-manager=cargo&previous-version=2.0.38&new-version=2.0.39)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Bumps [proc-macro-crate](https://github.com/bkchr/proc-macro-crate) from
1.3.1 to 2.0.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/bkchr/proc-macro-crate/releases">proc-macro-crate's
releases</a>.</em></p>
<blockquote>
<h2>v2.0.0</h2>
<h2>What's Changed</h2>
<ul>
<li>Release 2.0.0 by <a
href="https://github.com/bkchr"><code>@​bkchr</code></a> in <a
href="https://redirect.github.com/bkchr/proc-macro-crate/pull/39">bkchr/proc-macro-crate#39</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/bkchr/proc-macro-crate/compare/v1.3.1...v2.0.0">https://github.com/bkchr/proc-macro-crate/compare/v1.3.1...v2.0.0</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/bkchr/proc-macro-crate/commit/cc100ed2bc1ac9bb81812fd435a43e2ef023f355"><code>cc100ed</code></a>
Merge pull request <a
href="https://redirect.github.com/bkchr/proc-macro-crate/issues/39">#39</a>
from bkchr/bkchr-2.0.0</li>
<li><a
href="https://github.com/bkchr/proc-macro-crate/commit/39a7c1844fc4d73ef397a7e8d9419f1f3381aa44"><code>39a7c18</code></a>
Release 2.0.0</li>
<li>See full diff in <a
href="https://github.com/bkchr/proc-macro-crate/compare/v1.3.1...v2.0.0">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=proc-macro-crate&package-manager=cargo&previous-version=1.3.1&new-version=2.0.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Using taplo, fixes all our broken and inconsistent toml formatting and
adds CI to keep them tidy.

If people want we can customise the format rules as described here
https://taplo.tamasfe.dev/configuration/formatter-options.html

@ggwpez

, I suggest zepter is used only for checking features are
propagated, and leave formatting for taplo to avoid duplicate work and
conflicts.

TODO
- [x] Use `exclude = [...]` syntax in taplo file to ignore zombienet
tests instead of deleting the dir

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

Bumps the known_good_semver group with 2 updates:
[serde](https://github.com/serde-rs/serde) and
[clap](https://github.com/clap-rs/clap).

Updates `serde` from 1.0.188 to 1.0.193
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/serde-rs/serde/releases">serde's
releases</a>.</em></p>
<blockquote>
<h2>v1.0.193</h2>
<ul>
<li>Fix field names used for the deserialization of
<code>RangeFrom</code> and <code>RangeTo</code> (<a
href="https://redirect.github.com/serde-rs/serde/issues/2653">#2653</a>,
<a
href="https://redirect.github.com/serde-rs/serde/issues/2654">#2654</a>,
<a
href="https://redirect.github.com/serde-rs/serde/issues/2655">#2655</a>,
thanks <a
href="https://github.com/emilbonnek"><code>@​emilbonnek</code></a>)</li>
</ul>
<h2>v1.0.192</h2>
<ul>
<li>Allow internal tag field in untagged variant (<a
href="https://redirect.github.com/serde-rs/serde/issues/2646">#2646</a>,
thanks <a
href="https://github.com/robsdedude"><code>@​robsdedude</code></a>)</li>
</ul>
<h2>v1.0.191</h2>
<ul>
<li>Documentation improvements</li>
</ul>
<h2>v1.0.190</h2>
<ul>
<li>Preserve NaN sign when deserializing f32 from f64 or vice versa (<a
href="https://redirect.github.com/serde-rs/serde/issues/2637">#2637</a>)</li>
</ul>
<h2>v1.0.189</h2>
<ul>
<li>Fix &quot;cannot infer type&quot; error when internally tagged enum
contains untagged variant (<a
href="https://redirect.github.com/serde-rs/serde/issues/2613">#2613</a>,
thanks <a href="https://github.com/ahl"><code>@​ahl</code></a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/serde-rs/serde/commit/44613c7d0190dbb5ecd2d5ec19c636f45b7488cc"><code>44613c7</code></a>
Release 1.0.193</li>
<li><a
href="https://github.com/serde-rs/serde/commit/c706281df3c8d50dba1763f19c856df2746eba6c"><code>c706281</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2655">#2655</a>
from dtolnay/rangestartend</li>
<li><a
href="https://github.com/serde-rs/serde/commit/65d75b8fe3105f00ab2e01537d568d4587167582"><code>65d75b8</code></a>
Add RangeFrom and RangeTo tests</li>
<li><a
href="https://github.com/serde-rs/serde/commit/332b0cba40bcbcc7a6b23a9706277c54791a9856"><code>332b0cb</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2654">#2654</a>
from dtolnay/rangestartend</li>
<li><a
href="https://github.com/serde-rs/serde/commit/8c4af412969086bc8f54fdc2a079d373632e0a03"><code>8c4af41</code></a>
Fix more RangeFrom / RangeEnd mixups</li>
<li><a
href="https://github.com/serde-rs/serde/commit/24a78f071b22ae491eec4127be696ac255b9b5d3"><code>24a78f0</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2653">#2653</a>
from emilbonnek/fix/range-to-from-de-mixup</li>
<li><a
href="https://github.com/serde-rs/serde/commit/c91c33436d7aaef7472ebc18b734ddc9b5bd11fa"><code>c91c334</code></a>
Fix Range{From,To} deserialize mixup</li>
<li><a
href="https://github.com/serde-rs/serde/commit/2083f43a287cac8302009fda5bbe41518dd83209"><code>2083f43</code></a>
Update ui test suite to nightly-2023-11-19</li>
<li><a
href="https://github.com/serde-rs/serde/commit/4676abdc9e6bbbddfb33a00ce8d7e81e92f01120"><code>4676abd</code></a>
Release 1.0.192</li>
<li><a
href="https://github.com/serde-rs/serde/commit/35700eb23e21d8cb198ef4a422ddad13b855ce3b"><code>35700eb</code></a>
Merge pull request <a
href="https://redirect.github.com/serde-rs/serde/issues/2646">#2646</a>
from robsdedude/fix/2643/allow-tag-field-in-untagged</li>
<li>Additional commits viewable in <a
href="https://github.com/serde-rs/serde/compare/v1.0.188...v1.0.193">compare
view</a></li>
</ul>
</details>
<br />

Updates `clap` from 4.4.6 to 4.4.10
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/releases">clap's
releases</a>.</em></p>
<blockquote>
<h2>v4.4.10</h2>
<h2>[4.4.10] - 2023-11-28</h2>
<h3>Documentation</h3>
<ul>
<li>Link out to changelog</li>
<li>Cross link derive's attribute reference to derive tutorial</li>
</ul>
<h2>v4.4.9</h2>
<h2>[4.4.9] - 2023-11-27</h2>
<h3>Fixes</h3>
<ul>
<li><em>(help)</em> Show correct <code>Command::about</code> under
flattened headings</li>
<li><em>(help)</em> Respect <code>hide</code> when flattening
subcommands</li>
</ul>
<h2>v4.4.8</h2>
<h2>[4.4.8] - 2023-11-10</h2>
<h3>Features</h3>
<ul>
<li>Add <code>Command::flatten_help</code> to allow <code>git stash
-h</code> like help for subcommands</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.4.10] - 2023-11-28</h2>
<h3>Documentation</h3>
<ul>
<li>Link out to changelog</li>
<li>Cross link derive's attribute reference to derive tutorial</li>
</ul>
<h2>[4.4.9] - 2023-11-27</h2>
<h3>Fixes</h3>
<ul>
<li><em>(help)</em> Show correct <code>Command::about</code> under
flattened headings</li>
<li><em>(help)</em> Respect <code>hide</code> when flattening
subcommands</li>
</ul>
<h2>[4.4.8] - 2023-11-10</h2>
<h3>Features</h3>
<ul>
<li>Add <code>Command::flatten_help</code> to allow <code>git stash
-h</code> like help for subcommands</li>
</ul>
<h2>[4.4.7] - 2023-10-24</h2>
<h3>Performance</h3>
<ul>
<li>Reduced code size</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/c0a1814d3c1d93c18faaedc95fd251846e47f4fe"><code>c0a1814</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/c83e681e20b05f7e128088f47f8fcfc44e8ea166"><code>c83e681</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/91bcac4ca9d442786f554abeb7b1ed6d7a464a42"><code>91bcac4</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5230">#5230</a>
from epage/migrate</li>
<li><a
href="https://github.com/clap-rs/clap/commit/030d87505d150345ddd425c1df21c034d2ae7748"><code>030d875</code></a>
docs: Link out to the changelog at the relevant tag</li>
<li><a
href="https://github.com/clap-rs/clap/commit/b661a9de04aebd1adaaafdbf7e470f07a8d8a36d"><code>b661a9d</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5229">#5229</a>
from epage/derive</li>
<li><a
href="https://github.com/clap-rs/clap/commit/a08587b00e347492165ded1415bad6ab339e9f0b"><code>a08587b</code></a>
docs(derive): Link to tutorial sections for attributes</li>
<li><a
href="https://github.com/clap-rs/clap/commit/21b671f689bc0b8d790dc8c42902c22822bf6f82"><code>21b671f</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/93ba76dbaaf9136313a4fe2978693cc39fa467dd"><code>93ba76d</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/c1c55b30d853446e2cab78664c0d22c1b77d4dfd"><code>c1c55b3</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5228">#5228</a>
from epage/flat</li>
<li><a
href="https://github.com/clap-rs/clap/commit/b13f6d98622b80ba30e63c2c6e65d218cc8a4de3"><code>b13f6d9</code></a>
fix(help): Hide 'help' if only flattened subcommand</li>
<li>Additional commits viewable in <a
href="https://github.com/clap-rs/clap/compare/v4.4.6...v4.4.10">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

This PR provides the infrastructure for the pov-reclaim mechanism
discussed in #209. The goal is to provide the current proof size to the
runtime so it can be used to reclaim storage weight.

## New Host Function
- A new host function is provided
[here](https://github.com/skunert/polkadot-sdk/blob/5b317fda

/cumulus/primitives/pov-reclaim/src/lib.rs#L23).
It returns the size of the current proof size to the runtime. If
recording is not enabled, it returns 0.

## Implementation Overview
- Implement option to enable proof recording during import in the
client. This is currently enabled for `polkadot-parachain`,
`parachain-template` and the cumulus test node.
- Make the proof recorder ready for no-std. It was previously only
enabled for std environments, but we need to record the proof size in
`validate_block` too.
- Provide a recorder implementation that only the records the size of
incoming nodes and does not store the nodes itself.
- Fix benchmarks that were broken by async backing changes
- Provide new externalities extension that is registered by default if
proof recording is enabled.
- I think we should discuss the naming, pov-reclaim was more intuitive
to me, but we could also go with clawback like in the issue.

## Impact of proof recording during import
With proof recording: 6.3058 Kelem/s
Without proof recording: 6.3427 Kelem/s

The measured impact on the importing performance is quite low on my
machine using the block import benchmark. With proof recording I am
seeing a performance hit of 0.585%.

---------

Co-authored-by: command-bot <>
Co-authored-by: Davide Galassi <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

This PR introduces the new crate `developer_hub` into the polkadot-sdk
repo. The vision for the developer-hub crate is detailed in [this
document](https://docs.google.com/document/d/1XLLkFNE8v8HLvZpI2rzsa8N2IN1FcKntc8q-Sc4xBAk/edit?usp=sharing).

<img width="1128" alt="Screenshot 2023-11-02 at 10 45 48"
src="https://github.com/paritytech/polkadot-sdk/assets/5588131/1e12b60f-fef5-42c4-8503-a3ba234077c3">


Other than adding the new crate, it also does the following: 

* Remove the `substrate` crate, as there is now a unique umbrella crate
for multiple things in `developer_hub::polkadot_sdk`.
* (backport candidate) A minor change to `frame-support` macros that
allows `T::RuntimeOrigin` to also be acceptable as the origin type.
* (backport candidate) A minor change to `frame-system` that allows us
to deposit events at genesis because now the real genesis config is
generated via wasm, and we can safely assume `cfg!(feature = "std")`
means only testing. related to #62.
* (backport candidate) Introduces a small `read_events_for_pallet` to
`frame_system` for easier event reading in tests.
* From https://github.com/paritytech/polkadot-sdk-docs/issues/31, it
takes action on improving the `pallet::call` docs.
* From https://github.com/paritytech/polkadot-sdk-docs/issues/31, it
takes action on improving the `UncheckedExtrinsic` docs.

## Way Forward

First, a version of this is deployed temporarily
[here](https://blog.kianenigma.nl/polkadot-sdk/developer_hub/index.html).
I will keep it up to date on a daily basis.

### This Pull Request

I see two ways forward: 

1. We acknowledge that everything in `developer-hub` is going to be WIP,
and merge this asap. We should not yet use links to this crate anywhere.
2. We make this be the feature branch, make PRs against this, and either
gradually backport it, or only merge to master once it is done.

I am personally in favor of option 1. If we stick to option 2, we need a
better way to deploy a staging version of this to gh-pages.

### Issue Tracking

The main issues related to the future of `developer_hub` are: 

- https://github.com/paritytech/polkadot-sdk-docs/issues/31
- https://github.com/paritytech/polkadot-sdk-docs/issues/4
- https://github.com/paritytech/polkadot-sdk-docs/issues/26 
- https://github.com/paritytech/polkadot-sdk-docs/issues/32
- https://github.com/paritytech/polkadot-sdk-docs/issues/36


### After This Pull Request

- [ ] create a redirect for
https://paritytech.github.io/polkadot-sdk/master/substrate/
- [x] analytics 
- [ ] link checker
- [ ] the matter of publishing, and how all of these relative links for
when we do, that is still an open question. There is section on this in
the landing page.
- [ ] updated https://paritytech.github.io/

---------

Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Juan Girini <[email protected]>
Co-authored-by: bader y <[email protected]>
Co-authored-by: Sebastian Kunert <[email protected]>
Co-authored-by: James Wilson <[email protected]>
Co-authored-by: Michal Kucharczyk <[email protected]>

see #2189

This PR does the following:
- Bring the user api functions into a new pallet-contracts-uapi (They
are currently defined in ink!
[here])(https://github.com/paritytech/ink/blob/master/crates/env/src/engine/on_chain/ext.rs)
- Add older api versions and unstable to the user api trait.
- Remove pallet-contracts-primitives and bring the types it defined in
uapi / pallet-contracts
- Add the infrastructure to build fixtures from Rust files and test it
works by replacing `dummy.wat` and `call.wat`
- Move all the doc from wasm/runtime.rs to pallet-contracts-uapi.

This will be done in a follow up:
- convert the rest of the test from .wat to rust
- bring risc-v uapi up to date with wasm
- finalize the uapi host fns, making sure everything is codegen from the
source host fns in pallet-contracts

---------

Co-authored-by: Alexander Theißen <[email protected]>

This small PR removes an unnecessary trait bound to the `AuxStore` trait
from the Parachain template's `rpc.rs` file.

With that bound removed, the entire dependency on `sc-client-api` can
also be removed.

---------

Co-authored-by: Joshy Orndorff <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

rotko networks parachain bootnodes 
```
# array of commands for testing
parachains=(
  "./polkadot-parachain --chain asset-hub-polkadot --reserved-only --reserved-nodes /dns/mint14.rotko.net/tcp/33514/p2p/12D3KooWKkzLjYF6M5eEs7nYiqEtRqY8SGVouoCwo3nCWsRnThDW --no-hardware-benchmarks"
  "./polkadot-parachain --chain asset-hub-polkadot --reserved-only --reserved-nodes /dns/mint14.rotko.net/tcp/34514/ws/p2p/12D3KooWKkzLjYF6M5eEs7nYiqEtRqY8SGVouoCwo3nCWsRnThDW --no-hardware-benchmarks"
  "./polkadot-parachain --chain asset-hub-polkadot --reserved-only --reserved-nodes /dns/mint14.rotko.net/tcp/35514/wss/p2p/12D3KooWKkzLjYF6M5eEs7nYiqEtRqY8SGVouoCwo3nCWsRnThDW --no-hardware-benchmarks"
  "./polkadot-parachain --chain asset-hub-kusama --reserved-only --reserved-nodes /dns/mine14.rotko.net/tcp/33524/p2p/12D3KooWJUFnjR2PNbsJhudwPVaWCoZy1acPGKjM2cSuGj345BBu --no-hardware-benchmarks"
  "./polkadot-parachain --chain asset-hub-kusama --reserved-only --reserved-nodes /dns/mine14.rotko.net/tcp/34524/ws/p2p/12D3KooWJUFnjR2PNbsJhudwPVaWCoZy1acPGKjM2cSuGj345BBu --no-hardware-benchmarks"
  "./polkadot-parachain --chain asset-hub-kusama --reserved-only --reserved-nodes /dns/mine14.rotko.net/tcp/35524/wss/p2p/12D3KooWJUFnjR2PNbsJhudwPVaWCoZy1acPGKjM2cSuGj345BBu --no-hardware-benchmarks"
  "./polkadot-parachain --chain asset-hub-westend --reserved-only --reserved-nodes /dns/wmint14.rotko.net/tcp/33534/p2p/12D3KooWE4UDXqgtTcMCyUQ8S4uvaT8VMzzTBA6NWmKuYwTacWuN --no-hardware-benchmarks"
  "./polkadot-parachain --chain asset-hub-westend --reserved-only --reserved-nodes /dns/wmint14.rotko.net/tcp/34534/ws/p2p/12D3KooWE4UDXqgtTcMCyUQ8S4uvaT8VMzzTBA6NWmKuYwTacWuN --no-hardware-benchmarks"
  "./polkadot-parachain --chain asset-hub-westend --reserved-only --reserved-nodes /dns/wmint14.rotko.net/tcp/35534/wss/p2p/12D3KooWE4UDXqgtTcMCyUQ8S4uvaT8VMzzTBA6NWmKuYwTacWuN --no-hardware-benchmarks"
  "./polkadot-parachain --chain bridge-hub-polkadot --reserved-only --reserved-nodes /dns/pbr13.rotko.net/tcp/33543/p2p/12D3KooWMxZY7tDc2Rh454VaJJ7RexKAXVS6xSBEvTnXSGCnuGDw --no-hardware-benchmarks"
  "./polkadot-parachain --chain bridge-hub-polkadot --reserved-only --reserved-nodes /dns/pbr13.rotko.net/tcp/34543/ws/p2p/12D3KooWMxZY7tDc2Rh454VaJJ7RexKAXVS6xSBEvTnXSGCnuGDw --no-hardware-benchmarks"
  "./polkadot-parachain --chain bridge-hub-polkadot --reserved-only --reserved-nodes /dns/pbr13.rotko.net/tcp/35543/wss/p2p/12D3KooWMxZY7tDc2Rh454VaJJ7RexKAXVS6xSBEvTnXSGCnuGDw --no-hardware-benchmarks"
  "./polkadot-parachain --chain bridge-hub-kusama --reserved-only --reserved-nodes /dns/kbr13.rotko.net/tcp/33553/p2p/12D3KooWAmBp54mUEYtvsk2kxNEsDbAvdUMcaghxKXgUQxmPEQ66 --no-hardware-benchmarks"
  "./polkadot-parachain --chain bridge-hub-kusama --reserved-only --reserved-nodes /dns/kbr13.rotko.net/tcp/34553/ws/p2p/12D3KooWAmBp54mUEYtvsk2kxNEsDbAvdUMcaghxKXgUQxmPEQ66 --no-hardware-benchmarks"
  "./polkadot-parachain --chain bridge-hub-kusama --reserved-only --reserved-nodes /dns/kbr13.rotko.net/tcp/35553/wss/p2p/12D3KooWAmBp54mUEYtvsk2kxNEsDbAvdUMcaghxKXgUQxmPEQ66 --no-hardware-benchmarks"
  "./polkadot-parachain --chain bridge-hub-westend --reserved-only --reserved-nodes /dns/wbr13.rotko.net/tcp/33563/p2p/12D3KooWJyeRHpxZZbfBCNEgeUFzmRC5AMSAs2tJhjJS1k5hULkD --no-hardware-benchmarks"
  "./polkadot-parachain --chain bridge-hub-westend --reserved-only --reserved-nodes /dns/wbr13.rotko.net/tcp/34563/ws/p2p/12D3KooWJyeRHpxZZbfBCNEgeUFzmRC5AMSAs2tJhjJS1k5hULkD --no-hardware-benchmarks"
  "./polkadot-parachain --chain bridge-hub-westend --reserved-only --reserved-nodes /dns/wbr13.rotko.net/tcp/35563/wss/p2p/12D3KooWJyeRHpxZZbfBCNEgeUFzmRC5AMSAs2tJhjJS1k5hULkD --no-hardware-benchmarks"
  "./polkadot-parachain --chain collectives-polkadot --reserved-only --reserved-nodes /dns/pch13.rotko.net/tcp/33573/wss/p2p/12D3KooWRXudHoazPZ9osMfdY38e8CBxQLD4RhrVeHpRSNNpcDtH --no-hardware-benchmarks"
  "./polkadot-parachain --chain collectives-polkadot --reserved-only --reserved-nodes /dns/pch13.rotko.net/tcp/34573/wss/p2p/12D3KooWRXudHoazPZ9osMfdY38e8CBxQLD4RhrVeHpRSNNpcDtH --no-hardware-benchmarks"
  "./polkadot-parachain --chain collectives-polkadot --reserved-only --reserved-nodes /dns/pch13.rotko.net/tcp/35573/wss/p2p/12D3KooWRXudHoazPZ9osMfdY38e8CBxQLD4RhrVeHpRSNNpcDtH --no-hardware-benchmarks"
  "./polkadot-parachain --chain collectives-westend --reserved-only --reserved-nodes /dns/wch13.rotko.net/tcp/33593/p2p/12D3KooWPG85zhuSRoyptjLkFD4iJFistjiBmc15JgQ96B4fdXYr --no-hardware-benchmarks"
  "./polkadot-parachain --chain collectives-westend --reserved-only --reserved-nodes /dns/wch13.rotko.net/tcp/34593/ws/p2p/12D3KooWPG85zhuSRoyptjLkFD4iJFistjiBmc15JgQ96B4fdXYr --no-hardware-benchmarks"
  "./polkadot-parachain --chain collectives-westend --reserved-only --reserved-nodes /dns/wch13.rotko.net/tcp/35593/wss/p2p/12D3KooWPG85zhuSRoyptjLkFD4iJFistjiBmc15JgQ96B4fdXYr --no-hardware-benchmarks"
)
```

Since the Polkadot and Kusama runtimes are no longer in the repo, the
relevant systems parachains runtimes also need to be removed. More
context [here](https://github.com/paritytech/polkadot-sdk/issues/603)
and [here](https://github.com/paritytech/polkadot-sdk/pull/1731).

Removes the following:
- `asset-hub-kusama` and `asset-hub-polkadot`
- `bridge-hub-kusama` and `bridge-hub-polkadot`
- `collectives-polkadot`
- `glutton-kusama`

Partially solves #603 and adds to #1731.

Westend SP dmp queue pallet removal is complete.

<img width="1499" alt="Screenshot 2023-11-28 at 08 31 27"
src="https://github.com/paritytech/polkadot-sdk/assets/16665596/906246fb-3de9-4133-a827-431636a097ad">

<img width="1499" alt="Screenshot 2023-11-28 at 08 32 08"
src="https://github.com/paritytech/polkadot-sdk/assets/16665596/bde84891-b044-42c7-9a0b-59125cd24db1">

<img width="1499" alt="Screenshot 2023-11-28 at 08 31 45"
src="https://github.com/paritytech/polkadot-sdk/assets/16665596/38337484-0856-45c0-b9ff-8c785bc3c0e3">

This commit introduces a new concept called `NotificationService` which
allows Polkadot protocols to communicate with the underlying
notification protocol implementation directly, without routing events
through `NetworkWorker`. This implies that each protocol has its own
service which it uses to communicate with remote peers and that each
`NotificationService` is unique with respect to the underlying
notification protocol, meaning `NotificationService` for the transaction
protocol can only be used to send and receive transaction-related
notifications.

The `NotificationService` concept introduces two additional benefits:
  * allow protocols to start using custom handshakes
  * allow protocols to accept/reject inbound peers

Previously the validation of inbound connections was solely the
responsibility of `ProtocolController`. This caused issues with light
peers and `SyncingEngine` as `ProtocolController` would accept more
peers than `SyncingEngine` could accept which caused peers to have
differing views of their own states. `SyncingEngine` would reject excess
peers but these rejections were not properly communicated to those peers
causing them to assume that they were accepted.

With `NotificationService`, the local handshake is not sent to remote
peer if peer is rejected which allows it to detect that it was rejected.

This commit also deprecates the use of `NetworkEventStream` for all
notification-related events and going forward only DHT events are
provided through `NetworkEventStream`. If protocols wish to follow each
other's events, they must introduce additional abtractions, as is done
for GRANDPA and transactions protocols by following the syncing protocol
through `SyncEventStream`.

Fixes https://github.com/paritytech/polkadot-sdk/issues/512
Fixes https://github.com/paritytech/polkadot-sdk/issues/514
Fixes https://github.com/paritytech/polkadot-sdk/issues/515
Fixes https://github.com/paritytech/polkadot-sdk/issues/554
Fixes https://github.com/paritytech/polkadot-sdk/issues/556

---
These changes are transferred from
https://github.com/paritytech/substrate/pull/14197 but there are no
functional changes compared to that PR

---------

Co-authored-by: Dmitry Markin <[email protected]>
Co-authored-by: Alexandru Vasile <[email protected]>

The test was a bit flaky on CI. 

There was a race condition in the pov-recovery system. If the timing is
bad, it can happen that a block waits for a parent that is already
queued for import. The check if a block has children waiting happens
when we insert into the import queue. So we need to do an additional
check once we receive the import notification for the parent block.

Second issue is that `alice` was missing `--in-peers 0` and `--out-peers
0`, so alice was sometimes still fetching block via sync and the
assertion on the logs in zombienet would fail.

There is another potential issue that I saw once locally. We have a
failing pov-recovery queue that fails from time to time to check that
the retry mechanism does what it should. We now make sure that the same
candidate is never failed twice, so the tests become more predictable.

This was never used and we probably don't need it anyway.

Co-authored-by: ordian <[email protected]>
Co-authored-by: Vladimir Istyufeev <[email protected]>

Step in https://github.com/paritytech/polkadot-sdk/issues/171

This PR adds `derive_impl` on all `frame_system` config impls for mock
runtimes. The overridden configs are maintained as of now to ensure
minimal changes.

---------

Co-authored-by: Oliver Tale-Yazdi <[email protected]>

Currently the polkadot node will backoff from block authoring if
finality starts lagging. This PR disables this mechanism on production
networks (polkadot and kusama) and adds a flags to optionally force
enabling it.

README instructions fixes to be compatible with the `polkadot-prepare`
and `polkadot-execute` binary split.

Just adds more tests.

## Overview

This PR aligns the `spec_version` formatting to the [recent
changes](https://github.com/polkadot-fellows/runtimes/pull/26/files#diff-efa4caeb17487ecb13d8f5eb7863c3241d84afa2e73fbf25909a2ca89df0f362R142)
made for the Polkadot/Kusama runtimes.

It also backports the latest version `v1.4.0` bumps as `1_004_000`.

## Details

During the switch from `v0.9` to `v1.x`, the format of the
`spec_version` was modified from: `(M)m_ppp` for a runtime considered on
version `M.m.pp`. For instance `0.9.42` had a `spec_version` of `9420`.

With the transition to `v1.x`, the format was changed to a bigger number
(still `u32`) formatted as `MM_mm_ppp` where `1.2.3` would be stored as
`01_02_003`.

This PR aligns the format with that has been introduced in the
fellowship repo: `MMM_mmm_ppp`.

---------

Co-authored-by: Bastian Köcher <[email protected]>

This PR removes some `ChainSpec` types which are not necessary
(left-overs from #1256). Currently `ChainSpec` does not have to be
generic over the specific `RuntimeGenesisConfig`, it is enough to use
single type for all:

https://github.com/paritytech/polkadot-sdk/blob/9f787018/cumulus/polkadot-parachain/src/chain_spec/mod.rs#L53-L54


related to: https://github.com/paritytech/polkadot-sdk/issues/25

---------

Co-authored-by: command-bot <>

Otherwise the user may runs into weird errors if there is already a db.

The last issue blocking the removal of the Polkadot and Kusama system
parachains from the repo in #1737 is the dependency on the runtime code
through the RuntimeApi in `polkadot-parachain`.

This PR introduces two fake runtimes to satisfy the build requirements
and changes the `new_partial` function to make it not be generic over
the runtimes.
The reason for the second runtime is the different Aura keys used in
Polkadot Asset Hub, as the impl for AuraApi depends on this type.
If this changes the `RuntimeApi` generic could be removed completely
from all functions in `services.rs` and and generic type parameters in
`services.rs` and specified as a concrete type to TFullClient`.

---------

Co-authored-by: Bastian Köcher <[email protected]>