This PR changes the registration order of the `MessageQueue` pallet so
that it is registered last.

This is necessary so that the
[on_initialize](https://github.com/Snowfork/snowbridge/blob/df8d5da8/parachain/pallets/outbound-queue/src/lib.rs#L267)
hooks for Snowbridge can run before `MessageQueue` delivers messages
using its own `on_initialize`.

Generally, I think this is preferable regardless of Snowbridge's
particular requirements. Other pallets may want to do housekeeping
before MessageQueue starts delivering messages.

I'm hoping this PR, if accepted, can be included in the same release as
https://github.com/paritytech/polkadot-sdk/pull/1246. As otherwise,
changing the order of pallet registration is an ABI-breaking change.

`bridge-hub-westend-runtime` was added to cumulus/parachains, but wasn't
hooked up to xcm-emulator to run tests against it.

This commit addresses that ^.

Signed-off-by: Adrian Catangiu <[email protected]>

Otherwise the return code is not correctly propagated (ref
https://github.com/ggwpez/zepter/pull/48).

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

Right now governance could only control byte-fee component of Rococo <>
Westend message fees (paid at Asset Hubs). This PR changes it a bit:
1) governance now allowed to control both fee components - byte fee and
base fee;
2) base fee now includes cost of "default" delivery and confirmation
transactions, in addition to `ExportMessage` instruction cost.

(imported from https://github.com/paritytech/cumulus/pull/2157)

## Changes

This MR refactores the XCMP, Parachains System and DMP pallets to use
the [MessageQueue](https://github.com/paritytech/substrate/pull/12485)
for delayed execution of incoming messages. The DMP pallet is entirely
replaced by the MQ and thereby removed. This allows for PoV-bounded
execution and resolves a number of issues that stem from the current
work-around.

All System Parachains adopt this change.  
The most important changes are in `primitives/core/src/lib.rs`,
`parachains/common/src/process_xcm_message.rs`,
`pallets/parachain-system/src/lib.rs`, `pallets/xcmp-queue/src/lib.rs`
and the runtime configs.

### DMP Queue Pallet

The pallet got removed and its logic refactored into parachain-system.
Overweight message management can be done directly through the MQ
pallet.

Final undeployment migrations are provided by
`cumulus_pallet_dmp_queue::UndeployDmpQueue` and `DeleteDmpQueue` that
can be configured with an aux config trait like:

```rust
parameter_types! {
	pub const DmpQueuePalletName: &'static str = \"DmpQueue\" < CHANGE ME;
	pub const RelayOrigin: AggregateMessageOrigin = AggregateMessageOrigin::Parent;
}

impl cumulus_pallet_dmp_queue::MigrationConfig for Runtime {
	type PalletName = DmpQueuePalletName;
	type DmpHandler = frame_support::traits::EnqueueWithOrigin<MessageQueue, RelayOrigin>;
	type DbWeight = <Runtime as frame_system::Config>::DbWeight;
}

// And adding them to your Migrations tuple:
pub type Migrations = (
	...
	cumulus_pallet_dmp_queue::UndeployDmpQueue<Runtime>,
	cumulus_pallet_dmp_queue::DeleteDmpQueue<Runtime>,
);
```

### XCMP Queue pallet

Removed all dispatch queue functionality. Incoming XCMP messages are now
either: Immediately handled if they are Signals, enqueued into the MQ
pallet otherwise.

New config items for the XCMP queue pallet:
```rust
/// The actual queue implementation that retains the messages for later processing.
type XcmpQueue: EnqueueMessage<ParaId>;

/// How a XCM over HRMP from a sibling parachain should be processed.
type XcmpProcessor: ProcessMessage<Origin = ParaId>;

/// The maximal number of suspended XCMP channels at the same time.
#[pallet::constant]
type MaxInboundSuspended: Get<u32>;
```

How to configure those:

```rust
// Use the MessageQueue pallet to store messages for later processing. The `TransformOrigin` is needed since
// the MQ pallet itself operators on `AggregateMessageOrigin` but we want to enqueue `ParaId`s.
type XcmpQueue = TransformOrigin<MessageQueue, AggregateMessageOrigin, ParaId, ParaIdToSibling>;

// Process XCMP messages from siblings. This is type-safe to only accept `ParaId`s. They will be dispatched
// with origin `Junction::Sibling(…)`.
type XcmpProcessor = ProcessFromSibling<
	ProcessXcmMessage<
		AggregateMessageOrigin,
		xcm_executor::XcmExecutor<xcm_config::XcmConfig>,
		RuntimeCall,
	>,
>;

// Not really important what to choose here. Just something larger than the maximal number of channels.
type MaxInboundSuspended = sp_core::ConstU32<1_000>;
```

The `InboundXcmpStatus` storage item was replaced by
`InboundXcmpSuspended` since it now only tracks inbound queue suspension
and no message indices anymore.

Now only sends the most recent channel `Signals`, as all prio ones are
out-dated anyway.

### Parachain System pallet

For `DMP` messages instead of forwarding them to the `DMP` pallet, it
now pushes them to the configured `DmpQueue`. The message processing
which was triggered in `set_validation_data` is now being done by the MQ
pallet `on_initialize`.

XCMP messages are still handed off to the `XcmpMessageHandler`
(XCMP-Queue pallet) - no change here.

New config items for the parachain system pallet:
```rust
/// Queues inbound downward messages for delayed processing. 
///
/// Analogous to the `XcmpQueue` of the XCMP queue pallet.
type DmpQueue: EnqueueMessage<AggregateMessageOrigin>;
``` 

How to configure:
```rust
/// Use the MQ pallet to store DMP messages for delayed processing.
type DmpQueue = MessageQueue;
``` 

## Message Flow

The flow of messages on the parachain side. Messages come in from the
left via the `Validation Data` and finally end up at the `Xcm Executor`
on the right.

![Untitled
(1)](https://github.com/paritytech/cumulus/assets/10380170/6cf8b377-88c9-4aed-96df-baace266e04d)

## Further changes

- Bumped the default suspension, drop and resume thresholds in
`QueueConfigData::default()`.
- `XcmpQueue::{suspend_xcm_execution, resume_xcm_execution}` errors when
they would be a noop.
- Properly validate the `QueueConfigData` before setting it.
- Marked weight files as auto-generated so they wont auto-expand in the
MR files view.
- Move the `hypothetical` asserts to `frame_support` under the name
`experimental_hypothetically`

Questions:
- [ ] What about the ugly `#[cfg(feature = \"runtime-benchmarks\")]` in
the runtimes? Not sure how to best fix. Just having them like this makes
tests fail that rely on the real message processor when the feature is
enabled.
- [ ] Need a good weight for `MessageQueueServiceWeight`. The scheduler
already takes 80% so I put it to 10% but that is quite low.

TODO:
- [x] Remove c&p code after
https://github.com/paritytech/polkadot/pull/6271
- [x] Use `HandleMessage` once it is public in Substrate
- [x] fix `runtime-benchmarks` feature
https://github.com/paritytech/polkadot/pull/6966
- [x] Benchmarks
- [x] Tests
- [ ] Migrate `InboundXcmpStatus` to `InboundXcmpSuspended`
- [x] Possibly cleanup Migrations (DMP+XCMP)
- [x] optional: create `TransformProcessMessageOrigin` in Substrate and
replace `ProcessFromSibling`
- [ ] Rerun weights on ref HW

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>
Co-authored-by: command-bot <>

## Summary

Asset bridging support for AssetHub**Rococo** <-> AssetHub**Wococo** was
added [here](https://github.com/paritytech/polkadot-sdk/pull/1215), so
now we aim to bridge AssetHub**Rococo** and AssetHub**Westend**. (And
perhaps retire AssetHubWococo and the Wococo chains).

## Solution

**bridge-hub-westend-runtime**
- added new runtime as a copy of `bridge-hub-rococo-runtime`
- added support for bridging to `BridgeHubRococo`
- added tests and benchmarks

**bridge-hub-rococo-runtime**
- added support for bridging to `BridgeHubWestend`
- added tests and benchmarks
- internal refactoring by splitting bridge configuration per network,
e.g., `bridge_to_whatevernetwork_config.rs`.

**asset-hub-rococo-runtime**
- added support for asset bridging to `AssetHubWestend` (allows to
receive only WNDs)
- added new xcm router for `Westend`
- added tests and benchmarks

**asset-hub-westend-runtime**
- added support for asset bridging to `AssetHubRococo` (allows to
receive only ROCs)
- added new xcm router for `Rococo`
- added tests and benchmarks

## Deployment

All changes will be deployed as a part of
https://github.com/paritytech/polkadot-sdk/issues/1988.

## TODO

- [x] benchmarks for all pallet instances
- [x] integration tests
- [x] local run scripts


Relates to:
https://github.com/paritytech/parity-bridges-common/issues/2602
Relates to: https://github.com/paritytech/polkadot-sdk/issues/1988

---------

Co-authored-by: command-bot <>
Co-authored-by: Adrian Catangiu <[email protected]>
Co-authored-by: joe petrowski <[email protected]>

Co-authored-by: Sergejs Kostjucenko <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

Closes https://github.com/paritytech/release-engineering/issues/6

Adds a new Github Workflow which on a new release being created, builds
and attaches all runtimes managed in this repository in two flavours:
- `dev-debug-build`: Built with the `try-runtime` feature and has
logging enabled
- `on-chain-release`: Built with the regular old `on-chain-release`
feature

The new Github Workflow could be extended in the future by the
@paritytech/release-engineering team to fully automate the release
process if they choose to, similar to how it is fully automated in the
Fellowship repo
(https://github.com/polkadot-fellows/runtimes/blob/main/.github/workflows/release.yml).

The `on-chain-release` did not exist for parachains, so I added it. 

---

Tested on my fork: 
- https://github.com/liamaharon/polkadot-sdk/actions/runs/6663773523
- https://github.com/liamaharon/polkadot-sdk/releases/tag/test-6

---------

Co-authored-by: Chevdor <[email protected]>
Co-authored-by: Dónal Murray <[email protected]>

[testnet] Align testnet system parachain runtimes using `RelayTreasuryLocation` and `SystemParachains` in the same way (#2023)

This PR addresses several issues:
- simplify referencing `RelayTreasuryLocation` without needing
additional `RelayTreasury` struct
- fix for referencing `SystemParachains` from parachain with `parents:
1` instead of `parents: 0`
- removed hard-coded constants and fix tests for `asset-hub-rococo`
which was merged to master after
https://github.com/paritytech/polkadot-sdk/pull/1726

---------

Co-authored-by: command-bot <>

closes https://github.com/paritytech/polkadot-sdk/issues/1882

## Breaking Changes

This PR introduces a new item to `pallet_balances::Config`:

```diff
trait Config {
++    type RuntimeFreezeReasons;
}
```

This value is only used to check it against `type MaxFreeze`. A similar
check has been added for `MaxHolds` against `RuntimeHoldReasons`, which
is already given to `pallet_balances`.

In all contexts, you should pass the real `RuntimeFreezeReasons`
generated by `construct_runtime` to `type RuntimeFreezeReasons`. Passing
`()` would also work, but it would imply that the runtime uses no
freezes at all.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

This PR does not introduce any functional changes to the existing code,
it merely addresses several minor refactors:
- Moving bridging pallets to separate files.
- Improving the readability and naming of weight files for bridging
pallets and bridging pallet instances.

The reason for this refactor is to facilitate easier plugin integration
for the upcoming bridge between Rococo and Westend.

---------

Co-authored-by: command-bot <>

## Problem

This PR addresses the issue with testnet AssetHub builds, which was
discovered during the execution of `bot bench`.

https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4038738
```
     Compiling asset-hub-rococo-runtime-wasm v1.0.0 (/builds/parity/mirrors/polkadot-sdk/target/production/wbuild/asset-hub-rococo-runtime)
  warning: Linking globals named 'Core_version': symbol multiply defined!
  error: failed to load bitcode of module "rococo_runtime-8799ee884447805a.rococo_runtime.0bc572b8-cgu.0.rcgu.o": 
  warning: `asset-hub-rococo-runtime-wasm` (lib) generated 1 warning
  error: could not compile `asset-hub-rococo-runtime-wasm` (lib) due to previous error; 1 warning emitted
```

https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4038739
```
Compiling asset-hub-westend-runtime-wasm v1.0.0 (/builds/parity/mirrors/polkadot-sdk/target/production/wbuild/asset-hub-westend-runtime)
  warning: Linking globals named 'Core_version': symbol multiply defined!
  error: failed to load bitcode of module "westend_runtime-86d7844430f97d5c.westend_runtime.b7678d03-cgu.0.rcgu.o": 
  warning: `asset-hub-westend-runtime-wasm` (lib) generated 1 warning
  error: could not compile `asset-hub-westend-runtime-wasm` (lib) due to previous error; 1 warning emitted
```

## Solution

- Removed dependencies on `rococo-runtime` and `westend-runtime`
introduced by [this
PR](https://github.com/paritytech/polkadot-sdk/pull/1234/files#diff-a86375df98e04ca3cce1ea35c40257a222e2d5087f5f528ff33307678b78dc2dR534-R550).
- Replaced `<rococo_runtime::Treasury as PalletInfoAccess>::index()`
with `rococo_runtime_constants::TREASURY_PALLET_ID`.
- Added `check_treasury_pallet_id` to the relay runtimes to ensure that
the constant is aligned with the pallet id.
- Added "Rococo Treasury" to the waived locations (that will not be
charged fees in the executor) for `BridgeHubRococo` (to be aligned with
AssetHubs).

## References

[Full element discussion
here](https://matrix.to/#/!JUeaZUiYbdrvzvtwSL:parity.io/$2PnjYMsWRjR7M3oOfGuRI0XkjdoqJLtRcAPVcDLuLVg?via=parity.io&via=web3.foundation).

---------

Co-authored-by: command-bot <>

The `xcm` crate was renamed to `staging-xcm` to be able to publish it to
crates.io as someone as squatted `xcm`. The problem with this rename is
that the `TypeInfo` includes the crate name which ultimately lands in
the metadata. The metadata is consumed by downstream users like
`polkadot-js` or people building on top of `polkadot-js`. These people
are using the entire `path` to find the type in the type registry. Thus,
their code would break as the type path would now be [`staging_xcm`,
`VersionedXcm`] instead of [`xcm`, `VersionedXcm`]. This pull request
fixes this by renaming the path segment `staging_xcm` to `xcm`.

This requires: https://github.com/paritytech/scale-info/pull/197

---------

Co-authored-by: Francisco Aguirre <[email protected]>

Combination of paritytech/polkadot#7005, its addon PR
paritytech/polkadot#7585 and its companion paritytech/cumulus#2433.

This PR introduces a new XcmFeesToAccount struct which implements the
`FeeManager` trait, and assigns this struct as the `FeeManager` in the
XCM config for all runtimes.

The struct simply deposits all fees handled by the XCM executor to a
specified account. In all runtimes, the specified account is configured
as the treasury account.

XCM __delivery__ fees are now being introduced (unless the root origin
is sending a message to a system parachain on behalf of the originating
chain).

# Note for reviewers

Most file changes are tests that had to be modified to account for the
new fees.
Main changes are in:
- cumulus/pallets/xcmp-queue/src/lib.rs <- To make it track the delivery
fees exponential factor
- polkadot/xcm/xcm-builder/src/fee_handling.rs <- Added. Has the
FeeManager implementation
- All runtime xcm_config files <- To add the FeeManager to the XCM
configuration

# Important note

After this change, instructions that create and send a new XCM (Query*,
Report*, ExportMessage, InitiateReserveWithdraw, InitiateTeleport,
DepositReserveAsset, TransferReserveAsset, LockAsset and RequestUnlock)
will require the corresponding origin account in the origin register to
pay for transport delivery fees, and the onward message will fail to be
sent if the origin account does not have the required amount. This
delivery fee is on top of what we already collect as tx fees in
pallet-xcm and XCM BuyExecution fees!

Wallet UIs that want to expose the new delivery fee can do so using the
formula:

```
delivery_fee_factor * (base_fee + encoded_msg_len * per_byte_fee)
```

where the delivery fee factor can be obtained from the corresponding
pallet based on which transport you are using (UMP, HRMP or bridges),
the base fee is a constant, the encoded message length from the message
itself and the per byte fee is the same as the configured per byte fee
for txs (i.e. `TransactionByteFee`).

---------

Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Giles Cope <[email protected]>
Co-authored-by: command-bot <>
Co-authored-by: Francisco Aguirre <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>
Co-authored-by: Kian Paimani <[email protected]>

cumulus: add asset-hub-rococo runtime based on asset-hub-kusama and add asset-bridging support to it (#1215)

This commit adds Rococo Asset Hub dedicated runtime so we can test new
features here, before merging them in Kusama Asset Hub.
Also adds one such feature: asset transfer over bridge (Rococo AssetHub
<> Wococo AssetHub)

- clone `asset-hub-kusama-runtime` -> `asset-hub-rococo-runtime`
- make it use Rococo primitives, names, assets, constants, etc
- add asset-transfer-over-bridge support to Rococo AssetHub <> Wococo
AssetHub

Fixes #1128

---------

Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Francisco Aguirre <[email protected]>

Make System Parachain trusted Teleporters of each other.

Migration of https://github.com/paritytech/cumulus/pull/2842

---------

Co-authored-by: command-bot <>
Co-authored-by: joe petrowski <[email protected]>

[xcm] Use `Weight::MAX` for `reserve_asset_deposited`, `receive_teleported_asset` benchmarks (#1726)

# Description

## Summary

Previously, the `pallet_xcm::do_reserve_transfer_assets` and
`pallet_xcm::do_teleport_assets` functions relied on weight estimation
for remote chain execution, which was based on guesswork derived from
the local chain. This approach led to complications for runtimes that
did not provide or support specific [XCM
configurations](https://github.com/paritytech/polkadot-sdk/blob/7cbe0c76/polkadot/xcm/xcm-executor/src/config.rs#L43-L47)
for `IsReserve` or `IsTeleporter`. Consequently, such runtimes had to
resort to implementing hard-coded weights for XCM instructions like
`reserve_asset_deposited` or `receive_teleported_asset` to support
extrinsics such as `pallet_xcm::reserve_transfer_assets` and
`pallet_xcm::teleport_assets`, which depended on remote weight
estimation.

The issue of remote weight estimation was addressed and resolved by
[Pull Request
#1645](https://github.com/paritytech/polkadot-sdk/pull/1645), which
removed the need for remote weight estimation.

## Solution

As a continuation of this improvement, the current PR proposes further
cleanup by removing unnecessary hard-coded values and rectifying
benchmark results with `Weight::MAX` that previously used
`T::BlockWeights::get().max_block` as an override for unsupported XCM
instructions like `ReserveAssetDeposited` and `ReceiveTeleportedAsset`.


## Questions

- [x] Can we remove now also `Hardcoded till the XCM pallet is fixed`
for `deposit_asset`? E.g. for AssetHubKusama
[here](https://github.com/paritytech/polkadot-sdk/blob/7cbe0c76/cumulus/parachains/runtimes/assets/asset-hub-kusama/src/weights/xcm/mod.rs#L129-L134)
- [x] Are comments like
[this](https://github.com/paritytech/polkadot-sdk/blob/7cbe0c76/polkadot/runtime/kusama/src/weights/xcm/mod.rs#L94)
`// Kusama doesn't support ReserveAssetDeposited, so this benchmark has
a default weight` still relevant? Shouldnt be removed/changed?


## TODO

- [x] `bench bot` regenerate xcm weights for all runtimes
- [x] remove hard-coded stuff from system parachain weight files
- [ ] when merged, open `polkadot-fellow/runtimes` PR

## References

Fixes #1132
Closes #1132
Old polkadot repo [PR](https://github.com/paritytech/polkadot/pull/7546)

---------

Co-authored-by: command-bot <>

Co-authored-by: Branislav Kontur <[email protected]>

Makes SPs first class citizens along with the relay chains in the
context of our CI runtime upgrade checks.

## Code changes

- Sets missing current storage version in `uniques` pallet
- Adds multisig V1 migration to run where it was missing
- Removes executed migration whos pre/post hooks were failing from
collectives runtime
- Initializes storage versions for SP pallets added after genesis
- Originally I was going to wait for
https://github.com/paritytech/polkadot-sdk/pull/1297 to be merged so
this wouldn't need to be done manually, but it doesn't seem like it'll
be merged any time soon so I've decided to set them manually to unblock
this

## CI changes

- Removed dependency of `westend` runtime upgrades being complete prior
to other ones running. I assume it is supposed to cache the
`try-runtime` build for a performance benefit, but it seems it wasn't
working. Maybe someone from the CI team can look into this or explain
why it needs to be there?

- Adds check-runtime-migration jobs for Parity asset-hubs, bridge-hubs
and contract chains

- Updated VARIABLES to accomodate the `kusama-runtime` package being
renamed to `staging-kusama-runtime` in
https://github.com/paritytech/polkadot-sdk/pull/1241

- Added `EXTRA_ARGS` variable to `check-runtime-migration`, and set
`--no-weight-warnings` to the relay chain runtime upgrade checks (relay
chains don't have weight restrictions).

This pull request is removing the Kusama and Polkadot runtime crates. As
still some crates dependent on the runtime crates, this pull request is
doing some more changes.

- It removes the `hostperfcheck` CLI command. This CLI command could
compare the current node against the standard hardware by doing some
checks. Later we added the hardware benchmark feature to Substrate. This
hardware benchmark is running on every node startup and prints a warning
if the current node is too slow. This makes this CLI command a duplicate
that was also depending on the kusama runtime.

- The pull request is removing the emulated integration tests that were
requiring the Kusama or Polkadot runtime crates.

This PR implements [`GenesisBuilder`
API](https://github.com/paritytech/polkadot-sdk/blob/a414ea75

/substrate/primitives/genesis-builder/src/lib.rs#L38)
for all the runtimes in polkadot repo.

Step towards: paritytech/polkadot-sdk#25

---------

Co-authored-by: ordian <[email protected]>

This PR adds test case for successful `send_xcm` for `XcmpQueue`
according to the opened HRMP channel to the sibling parachain.

Enable `runtime-benchmarks` feature for `parachain-common` and
`cumulus-primitives-utility` crates' dependencies.

After adding `runtime-benchmarks = []` under `features` category in
`Cargo.toml` files for the creates, I did run,
> zepter lint propagate-feature --feature runtime-benchmarks --workspace
--fix --feature-enables-dep="runtime-benchmarks:frame-benchmarking"

This changes required for
https://github.com/paritytech/polkadot-sdk/pull/1333

* Move the bridges subtree under root

* Squashed 'bridges/' changes from 277f0d5496..e50398d1c5

e50398d1c5 bridges subtree fixes (#2528)
99af07522d Markdown linter (#1309) (#2526)
733ff0fe7a `polkadot-staging` branch: Use polkadot-sdk dependencies (#2524)
e8a59f141e Fix benchmark with new XCM::V3 `MAX_INSTRUCTIONS_TO_DECODE` (#2514)
62b185de15 Backport `polkadot-sdk` changes to `polkadot-staging` (#2518)
d9658f4d5b Fix equivocation detection containers startup (#2516) (#2517)
d65db28a8f Backport: building images from locally built binaries (#2513)
5fdbaf45f6 Start the equivocation detection loop from the complex relayer (#2507) (#2512)
7fbb67de46 Backport: Implement basic equivocations detection loop (#2375)
cb7efe245c Manually update deps in polkadot staging (#2371)
d17981fc33 #2351 to polkadot-staging (#2359)

git-subtree-dir: bridges
git-subtree-split: e50398d1c594e4e96df70b0bd376e565d17e8558

* Reapply diener workspacify

* Fix Cargo.toml

* Fix ...

* add common libs

* asset hubs

* add westend

* bridge hubs

* collectives

* contracts

* emulated tests

* parachain bin

* delete collectives constants and update docs

* integration tests should have apache license (some missing, some needed changing)

* propagate features

* fmt

* Add markdown linting

- add linter default rules
- adapt rules to current code
- fix the code for linting to pass
- add CI check

fix #1243

* Fix markdown for Substrate
* Fix tooling install
* Fix workflow
* Add documentation
* Remove trailing spaces
* Update .github/.markdownlint.yaml

Co-authored-by: Oliver Tale-Yazdi <[email protected]>
* Fix mangled markdown/lists
* Fix captalization issues on known words

* Added short-benchmarks for cumulus

* Added `--bin` flag for short-benchmarks

* fix dependency for short-benchmark-cumulus

* Fixed benchmark with new XCM::V3 `MAX_INSTRUCTIONS_TO_DECODE`

* Fixed benchmark for bridge messages pallets

---------

Co-authored-by: alvicsam <[email protected]>
Co-authored-by: Javier Viola <[email protected]>
Co-authored-by: Alexander Samusev <[email protected]>

* Rename `polkadot-parachain` to `polkadot-parachain-primitives`

While doing this it also fixes some last `rustdoc` issues and fixes
another Cargo warning related to `pallet-paged-list`.

* Fix compilation

* ".git/.scripts/commands/fmt/fmt.sh"

* Fix XCM docs

---------

Co-authored-by: command-bot <>

* Rename squatted crates

This commit adds the staging- prefix to squatted crates so we can go forward and publish them to crates.io.

Using the staging- prefix is a temp fix until we decide on replacement names.
https://forum.parity.io/t/renaming-squated-crates-in-substrate-polkadot-cumulus/1964/6

* Fix test after crate renames

* Update Lockfile

* Add missing Cumulus licenses

* Typo

* Add missing Substrate licenses

* Single job checking the sub-repos in steps

* Remove dates

* Remove dates

* Add missing (C)

* Update FRAME UI tests

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Update more UI tests

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>

Bumps the known_good_semver group with 2 updates: [serde](https://github.com/serde-rs/serde) and [clap](https://github.com/clap-rs/clap).


Updates `serde` from 1.0.186 to 1.0.188
- [Release notes](https://github.com/serde-rs/serde/releases)
- [Commits](https://github.com/serde-rs/serde/compare/v1.0.186...v1.0.188)

Updates `clap` from 4.4.0 to 4.4.1
- [Release notes](https://github.com/clap-rs/clap/releases)
- [Changelog](https://github.com/clap-rs/clap/blob/master/CHANGELOG.md)
- [Commits](https://github.com/clap-rs/clap/compare/clap_complete-v4.4.0...v4.4.1)

---
updated-dependencies:
- dependency-name: serde
  dependency-type: direct:production
  update-type: version-update:semver-patch
  dependency-group: known_good_semver
- dependency-name: clap
  dependency-type: direct:production
  update-type: version-update:semver-patch
  dependency-group: known_good_semver
...

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

* Set test crates to nopublish

* Don't publish more crates

* Set even more crates to nopublish

---------

Co-authored-by: Oliver Tale-Yazdi <[email protected]>

* Fix build profiles

Closes https://github.com/paritytech/polkadot-sdk/issues/1155

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Manually set version to 1.0.0

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Use workspace repo

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* 'Authors and Edition from workspace

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Manually fix conflicting ?

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Remove duplicates

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Autofix feature propagation

zepter lint propagate-feature --feature try-runtime --left-side-feature-missing=ignore --workspace --fix --feature-enables-dep="try-runtime:frame-try-runtime"
zepter lint propagate-feature --feature runtime-benchmarks --left-side-feature-missing=ignore --workspace --fix --feature-enables-dep="runtime-benchmarks:frame-benchmarking"
zepter lint propagate-feature --feature std --left-side-feature-missing=ignore --workspace --fix
zepter f f

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Bump zepter

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add some duplicates

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Revert "Add some duplicates"

This reverts commit c6ce6272

.

* Remove default enabled features

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Bump Zepter

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Bump in correct location 🤦



Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* DNM: Add some mistakes

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* DNM: Add some mistakes

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Revert "DNM: Add some mistakes"

This reverts commit d469b3f0.

* Revert "DNM: Add some mistakes"

This reverts commit d892a73a

.

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add CI for monorepo

* fix frame tests

* Format features

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* add note for skipping tests and disable test-linux-stable-all

* Fix tests and compile issues (#1152)

* Fix feature dependant import

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Bump test timeout

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Remove feature gate

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Add resolver 2

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Remove old lockfile

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Format features

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Fix check-dependency-rules

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* rm test-runtime

Signed-o...

Signed-off-by: alvicsam <[email protected]>

* Fix aura config

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Fix Cargo.toml files

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Ignore feature-dependant tests

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* Allow dead code

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

---------

Signed-off-by: Oliver Tale-Yazdi <[email protected]>

* restructure macro related exports

* restructure macro related exports

* wip

* wip

* update cargo lock

* refactor RuntimeDebug on unincluded segment

* fmt

* Companion: restructure `benchmarking` macro related exports (#3039)

* wip

* wip

* restructure benchmarking macro related exports

* add cargo lock

---------

Co-authored-by: parity-processbot <>