This PR backports `transaction_version` bump from `1.5.0` release back
to `master`

This tool makes it easy to run parachain consensus stress/performance
testing on your development machine or in CI.

## Motivation
The parachain consensus node implementation spans across many modules
which we call subsystems. Each subsystem is responsible for a small part
of logic of the parachain consensus pipeline, but in general the most
load and performance issues are localized in just a few core subsystems
like `availability-recovery`, `approval-voting` or
`dispute-coordinator`. In the absence of such a tool, we would run large
test nets to load/stress test these parts of the system. Setting up and
making sense of the amount of data produced by such a large test is very
expensive, hard to orchestrate and is a huge development time sink.

## PR contents
- CLI tool 
- Data Availability Read test
- reusable mockups and components needed so far
- Documentation on how to get started

### Data Availability Read test

An overseer is built with using a real `availability-recovery` susbsytem
instance while dependent subsystems like `av-store`, `network-bridge`
and `runtime-api` are mocked. The network bridge will emulate all the
network peers and their answering to requests.

The test is going to be run for a number of blocks. For each block it
will generate send a “RecoverAvailableData” request for an arbitrary
number of candidates. We wait for the subsystem to respond to all
requests before moving to the next block.
At the same time we collect the usual subsystem metrics and task CPU
metrics and show some nice progress reports while running.

### Here is how the CLI looks like:

```
[2023-11-28T13:06:27Z INFO  subsystem_bench::core::display] n_validators = 1000, n_cores = 20, pov_size = 5120 - 5120, error = 3, latency = Some(PeerLatency { min_latency: 1ms, max_latency: 100ms })
[2023-11-28T13:06:27Z INFO  subsystem-bench::availability] Generating template candidate index=0 pov_size=5242880
[2023-11-28T13:06:27Z INFO  subsystem-bench::availability] Created test environment.
[2023-11-28T13:06:27Z INFO  subsystem-bench::availability] Pre-generating 60 candidates.
[2023-11-28T13:06:30Z INFO  subsystem-bench::core] Initializing network emulation for 1000 peers.
[2023-11-28T13:06:30Z INFO  subsystem-bench::availability] Current block 1/3
[2023-11-28T13:06:30Z INFO  substrate_prometheus_endpoint] 〽

️ Prometheus exporter started at 127.0.0.1:9999
[2023-11-28T13:06:30Z INFO  subsystem_bench::availability] 20 recoveries pending
[2023-11-28T13:06:37Z INFO  subsystem_bench::availability] Block time 6262ms
[2023-11-28T13:06:37Z INFO  subsystem-bench::availability] Sleeping till end of block (0ms)
[2023-11-28T13:06:37Z INFO  subsystem-bench::availability] Current block 2/3
[2023-11-28T13:06:37Z INFO  subsystem_bench::availability] 20 recoveries pending
[2023-11-28T13:06:43Z INFO  subsystem_bench::availability] Block time 6369ms
[2023-11-28T13:06:43Z INFO  subsystem-bench::availability] Sleeping till end of block (0ms)
[2023-11-28T13:06:43Z INFO  subsystem-bench::availability] Current block 3/3
[2023-11-28T13:06:43Z INFO  subsystem_bench::availability] 20 recoveries pending
[2023-11-28T13:06:49Z INFO  subsystem_bench::availability] Block time 6194ms
[2023-11-28T13:06:49Z INFO  subsystem-bench::availability] Sleeping till end of block (0ms)
[2023-11-28T13:06:49Z INFO  subsystem_bench::availability] All blocks processed in 18829ms
[2023-11-28T13:06:49Z INFO  subsystem_bench::availability] Throughput: 102400 KiB/block
[2023-11-28T13:06:49Z INFO  subsystem_bench::availability] Block time: 6276 ms
[2023-11-28T13:06:49Z INFO  subsystem_bench::availability] 
    
    Total received from network: 415 MiB
    Total sent to network: 724 KiB
    Total subsystem CPU usage 24.00s
    CPU usage per block 8.00s
    Total test environment CPU usage 0.15s
    CPU usage per block 0.05s
```

### Prometheus/Grafana stack in action
<img width="1246" alt="Screenshot 2023-11-28 at 15 11 10"
src="https://github.com/paritytech/polkadot-sdk/assets/54316454/eaa47422-4a5e-4a3a-aaef-14ca644c1574">
<img width="1246" alt="Screenshot 2023-11-28 at 15 12 01"
src="https://github.com/paritytech/polkadot-sdk/assets/54316454/237329d6-1710-4c27-8f67-5fb11d7f66ea">
<img width="1246" alt="Screenshot 2023-11-28 at 15 12 38"
src="https://github.com/paritytech/polkadot-sdk/assets/54316454/a07119e8-c9f1-4810-a1b3-f1b7b01cf357">

---------

Signed-off-by: Andrei Sandu <[email protected]>

Bumps [actions/checkout](https://github.com/actions/checkout) from 4.1.0
to 4.1.1.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/actions/checkout/releases">actions/checkout's
releases</a>.</em></p>
<blockquote>
<h2>v4.1.1</h2>
<h2>What's Changed</h2>
<ul>
<li>Update CODEOWNERS to Launch team by <a
href="https://github.com/joshmgross"><code>@​joshmgross</code></a> in <a
href="https://redirect.github.com/actions/checkout/pull/1510">actions/checkout#1510</a></li>
<li>Correct link to GitHub Docs by <a
href="https://github.com/peterbe"><code>@​peterbe</code></a> in <a
href="https://redirect.github.com/actions/checkout/pull/1511">actions/checkout#1511</a></li>
<li>Link to release page from what's new section by <a
href="https://github.com/cory-miller"><code>@​cory-miller</code></a> in
<a
href="https://redirect.github.com/actions/checkout/pull/1514">actions/checkout#1514</a></li>
</ul>
<h2>New Contributors</h2>
<ul>
<li><a
href="https://github.com/joshmgross"><code>@​joshmgross</code></a> made
their first contribution in <a
href="https://redirect.github.com/actions/checkout/pull/1510">actions/checkout#1510</a></li>
<li><a href="https://github.com/peterbe"><code>@​peterbe</code></a> made
their first contribution in <a
href="https://redirect.github.com/actions/checkout/pull/1511">actions/checkout#1511</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/actions/checkout/compare/v4.1.0...v4.1.1">https://github.com/actions/checkout/compare/v4.1.0...v4.1.1</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/actions/checkout/commit/b4ffde65f46336ab88eb53be808477a3936bae11"><code>b4ffde6</code></a>
Link to release page from what's new section (<a
href="https://redirect.github.com/actions/checkout/issues/1514">#1514</a>)</li>
<li><a
href="https://github.com/actions/checkout/commit/8530928916aaef40f59e6f221989ccb31f5759e7"><code>8530928</code></a>
Correct link to GitHub Docs (<a
href="https://redirect.github.com/actions/checkout/issues/1511">#1511</a>)</li>
<li><a
href="https://github.com/actions/checkout/commit/7cdaf2fbc075e6f3b9ca94cfd6cec5adc8a75622"><code>7cdaf2f</code></a>
Update CODEOWNERS to Launch team (<a
href="https://redirect.github.com/actions/checkout/issues/1510">#1510</a>)</li>
<li>See full diff in <a
href="https://github.com/actions/checkout/compare/v4.1.0...b4ffde65f46336ab88eb53be808477a3936bae11">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=actions/checkout&package-manager=github_actions&previous-version=4.1.0&new-version=4.1.1)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

In `Currency`, we have a dummy impl that we can use for mocks or
examples where we only want to satisfy the trait bounds. I added the
same dummy implementations to `fungible` and `fungibles` regular traits.

---------

Co-authored-by: command-bot <>

Co-authored-by: Alexandru Vasile <[email protected]>

This PR has a tiny fix for the proper creation of the tag for the
pokadot's docker tag.

This PR adds a round check to the `Call::submit` extrinsic to make sure
that the solution submission has been prepared for the current election
round and avoid penalties for delayed submissions.

Related to
https://github.com/paritytech-secops/srlabs_findings/issues/329

---------

Co-authored-by: command-bot <>

Bumps [toml](https://github.com/toml-rs/toml) from 0.7.6 to 0.8.2.
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/toml-rs/toml/commit/fe65b2bfa2021b939a0fc71e8b008609ea21f6fe"><code>fe65b2b</code></a>
chore: Release</li>
<li><a
href="https://github.com/toml-rs/toml/commit/ed597ebad11afdadc27712e3f851e6c5cd48fb51"><code>ed597eb</code></a>
chore: Release</li>
<li><a
href="https://github.com/toml-rs/toml/commit/257a0fdc59656c01bcce151af61339563fac22c4"><code>257a0fd</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/toml-rs/toml/commit/4b44f53a3194729317250232872584464ebe12a7"><code>4b44f53</code></a>
Merge pull request <a
href="https://redirect.github.com/toml-rs/toml/issues/617">#617</a> from
epage/update</li>
<li><a
href="https://github.com/toml-rs/toml/commit/7eaf2861106430833eb40e7b237fe5522be6bb03"><code>7eaf286</code></a>
fix(parser): Failed on mixed inline tables</li>
<li><a
href="https://github.com/toml-rs/toml/commit/e1f20378a2a8c78f182b2ac61f76eebd30990b77"><code>e1f2037</code></a>
test: Verify with latest data</li>
<li><a
href="https://github.com/toml-rs/toml/commit/2f9253c9eb6c968be8227284b873660bd3451007"><code>2f9253c</code></a>
chore: Update toml-test</li>
<li><a
href="https://github.com/toml-rs/toml/commit/c9b481cab5038e9801e60f6bfb935f983218d8f6"><code>c9b481c</code></a>
test(toml): Ensure tables are used for validation</li>
<li><a
href="https://github.com/toml-rs/toml/commit/43d7f29cfdad91bb72658d94039b16e7457a54ed"><code>43d7f29</code></a>
Merge pull request <a
href="https://redirect.github.com/toml-rs/toml/issues/615">#615</a> from
toml-rs/renovate/actions-checkout-4.x</li>
<li><a
href="https://github.com/toml-rs/toml/commit/ef9b8372c86f84481e8439c9c4a1f5dc4c15c35e"><code>ef9b837</code></a>
chore(deps): update actions/checkout action to v4</li>
<li>Additional commits viewable in <a
href="https://github.com/toml-rs/toml/compare/toml-v0.7.6...toml-v0.8.2">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=toml&package-manager=cargo&previous-version=0.7.6&new-version=0.8.2)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

We currently use a bit of a hack in `.cargo/config` to make sure that
clippy isn't too annoying by specifying the list of lints.

There is now a stable way to define lints for a workspace. The only down
side is that every crate seems to have to opt into this so there's a
*few* files modified in this PR.

Dependencies:

- [x] PR that upgrades CI to use rust 1.74 is merged.

---------

Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: Liam Aharon <[email protected]>

Co-authored-by: command-bot <>

So far the `bridge-hub-test-utils` contained a tests set for testing
BridgeHub runtime that is bridging with the remote **parachain**. But we
have https://github.com/paritytech/polkadot-sdk/pull/2540 coming, which
would add Rococo <> Bulletin chain bridge (where Bulletin = standalone
chain that is using GRANDPA finality). Then it'll be expanded to
Polkadot BH as well.

So this PR adds the same set of tests to the `bridge-hub-test-utils`,
but for the case when remote chain is the chain with GRANDPA finality.
There's a lot of changes in this PR - I'll describe some:
- I've added `BasicParachainRuntime` trait to decrease number of lines
we need to add to `where` clause. Could revert, but imo it is useful;
- `cumulus/parachains/runtimes/bridge-hubs/test-utils/src/test_data` is
a submodule for generating test data for the test sets.
`from_parachain.rs` is used in tests for the case when remote chain is a
parachain, `from_grandpa_chain.rs` - for the bridges with remote GRANDPA
chains. `mod.rs` has some code, shared by both types of tests;
- `cumulus/parachains/runtimes/bridge-hubs/test-utils/src/test_data` is
a submodule with all test cases. The `mod.rs` has tests, suitable for
all cases. There's also `wth_parachain.rs` and `with_grandpa_chain.rs`
with the same meaning as above;
- I've merged the "core" code of two previous tests -
`relayed_incoming_message_works` and `complex_relay_extrinsic_works`
into one single `relayed_incoming_message_works` test. So now we are
always constructing extrinsics and are dispatching them using executive
module (meaning all signed extensions are also tested).

New test set is used here:
https://github.com/paritytech/polkadot-sdk/pull/2540. Once this PR is
merged, I'll merge that other PR with master to remove duplicate
changes.

I'm also planning to cleanup generic constraints + remove some
unnecessary assumptions about used chains in a follow-up PRs. But for
now I think this PR has enough changes, so don't want to complicate it
even more.

---

Breaking changes for the code that have used those tests before:
- the `construct_and_apply_extrinsic` callback now accepts the
`RuntimeCall` instead of the `pallet_utility::Call`;
- the `construct_and_apply_extrinsic` now may be called multiple times
for the single test, so make sure the `frame_system::CheckNonce` is
correctly constructed;
- all previous tests have been moved from
`bridge_hub_test_utils::test_cases` to
`bridge_hub_test_utils::test_cases::from_parachain` module;
- there are several changes in test arguments - please refer to
https://github.com/paritytech/polkadot-sdk/compare/sv-tests-for-bridge-with-remote-grandpa-chain?expand=1#diff-79a28d4d3e1749050341c2424f00c4c139825b1a20937767f83e58b95166735c
for details.

This PR introduces:
- a new script 
- a new GH Workflow 
- runtime reference spec files for `rococo` and `westend`

It brings a mechanism to check that part(s) of the runtimes' metadata
that should not change over time, actually did not change over time.

Ideally, the GHW should trigger when a release is edited but GH seem to
[have an issue](https://github.com/orgs/community/discussions/47794)
that prevents the trigger from working. This is why the check has been
implemented as `workflow_dispatch` for a start.

The `workflow_dispatch` requires a `release_id` that can be found using:
```
curl -s -H "Authorization: Bearer ${GITHUB_TOKEN}" \
   https://api.github.com/repos/paritytech/polkadot-sdk/releases | \
   jq '.[] | { name: .name, id: .id }'
```
as documented in the workflow.

A sample run can be seen
[here](https://github.com/chevdor/polkadot-sdk/actions/runs/6811176342).

Rename `ExportGenesisStateCommand` to `ExportGenesisHeadCommand` and make it respect custom genesis block builders (#2331)

Closes #2326.

This PR both fixes a logic bug and replaces an incorrect name.

## Bug Fix: Respecting custom genesis builder

Prior to this PR the standard logic for creating a genesis block was
repeated inside of cumulus. This PR removes that duplicated logic, and
calls into the proper `BuildGenesisBlock` implementation.

One consequence is that if the genesis block has already been
initialized, it will not be re-created, but rather read from the
database like it is for other node invocations. So you need to watch out
for old unpurged data during the development process. Offchain tools may
need to be updated accordingly. I've already filed
https://github.com/paritytech/zombienet/issues/1519

## Rename: It doesn't export state. It exports head data.

The name export-genesis-state was always wrong, nad it's never too late
to right a wrong. I've changed the name of the struct to
`ExportGenesisHeadCommand`.

There is still the question of what to do with individual nodes' public
CLIs. I have updated the parachain template to a reasonable default that
preserves compatibility with tools that will expect
`export-genesis-state` to still work. And I've chosen not to modify the
public CLIs of any other nodes in the repo. I'll leave it up to their
individual owners/maintains to decide whether that is appropriate.

---------

Co-authored-by: Joshy Orndorff <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>
Co-authored-by: Bastian Köcher <[email protected]>

Initial implementation for the plan discussed here: https://github.com/paritytech/polkadot-sdk/issues/701
Built on top of https://github.com/paritytech/polkadot-sdk/pull/1178
v0: https://github.com/paritytech/polkadot/pull/7554,

## Overall idea

When approval-voting checks a candidate and is ready to advertise the
approval, defer it in a per-relay chain block until we either have
MAX_APPROVAL_COALESCE_COUNT candidates to sign or a candidate has stayed
MAX_APPROVALS_COALESCE_TICKS in the queue, in both cases we sign what
candidates we have available.

This should allow us to reduce the number of approvals messages we have
to create/send/verify. The parameters are configurable, so we should
find some values that balance:

- Security of the network: Delaying broadcasting of an approval
shouldn't but the finality at risk and to make sure that never happens
we won't delay sending a vote if we are past 2/3 from the no-show time.
- Scalability of the network: MAX_APPROVAL_COALESCE_COUNT = 1 &
MAX_APPROVALS_COALESCE_TICKS =0, is what we have now and we know from
the measurements we did on versi, it bottlenecks
approval-distribution/approval-voting when increase significantly the
number of validators and parachains
- Block storage: In case of disputes we have to import this votes on
chain and that increase the necessary storage with
MAX_APPROVAL_COALESCE_COUNT * CandidateHash per vote. Given that
disputes are not the normal way of the network functioning and we will
limit MAX_APPROVAL_COALESCE_COUNT in the single digits numbers, this
should be good enough. Alternatively, we could try to create a better
way to store this on-chain through indirection, if that's needed.

## Other fixes:
- Fixed the fact that we were sending random assignments to
non-validators, that was wrong because those won't do anything with it
and they won't gossip it either because they do not have a grid topology
set, so we would waste the random assignments.
- Added metrics to be able to debug potential no-shows and
mis-processing of approvals/assignments.

## TODO:
- [x] Get feedback, that this is moving in the right direction. @ordian
@sandreim @eskimor

 @burdges, let me know what you think.
- [x] More and more testing.
- [x]  Test in versi.
- [x] Make MAX_APPROVAL_COALESCE_COUNT &
MAX_APPROVAL_COALESCE_WAIT_MILLIS a parachain host configuration.
- [x] Make sure the backwards compatibility works correctly
- [x] Make sure this direction is compatible with other streams of work:
https://github.com/paritytech/polkadot-sdk/issues/635 &
https://github.com/paritytech/polkadot-sdk/issues/742
- [x] Final versi burn-in before merging

---------

Signed-off-by: Alexandru Gheorghe <[email protected]>

## Summary

This PR turns on `-D warnings` for `cargo-check-each-crate job` job to
fail on warnings e.g. like this:
https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4673130

Before this PR, there was a warning and `cargo-check-each-crate` job did
not fail:
https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4641444
```
warning: unused import: `ToTokens`
  --> substrate/primitives/api/proc-macro/src/utils.rs:22:34
   |
22 | use quote::{format_ident, quote, ToTokens};
   |                                  ^^^^^^^^
   |
   = note: `#[warn(unused_imports)]` on by default
warning: `sp-api-proc-macro` (lib) generated 1 warning (run `cargo fix --lib -p sp-api-proc-macro` to apply 1 suggestion)
```

Fixes on the way:
https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4641444
https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4673265
https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4673410
https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4673681
https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4673836
https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4673941
https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4674256
https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4679328



## Questions
- [ ] why does this check triggers only `cargo check --locked`?
`--all-features` or `--all-targets` are not needed? Or aren't they
avoided intentionally?

---------

Co-authored-by: command-bot <>

# Description

- What does this PR do?
This PR make some methods of `OverlayedChanges` public which were
previously only visible in same crate.
- Why are these changes needed?
Since, some methods of the `OverlayedChanges` only have crate level
visibility, which makes `OverlayedChanges` somewhat unusable outside the
crate to create custom implementation of `Externalities`. We make those
method public to enable `OverlayedChanges` to remedy this.
- How were these changes implemented and what do they affect?
Changes are implemented by replacing crate visibility to public
visibility of 4 functions.


# Checklist

- [x] My PR includes a detailed description as outlined in the
"Description" section above
- [ ] My PR follows the [labeling requirements](CONTRIBUTING.md#Process)
of this project (at minimum one label for `T`
  required)
- [ ] I have made corresponding changes to the documentation (if
applicable)
- [ ] I have added tests that prove my fix is effective or that my
feature works (if applicable)

---------

Co-authored-by: Bastian Köcher <[email protected]>

Small update of the title in one of the prdoc files

We were not filtering for sibling parachains, but for sibling anything

---------

Co-authored-by: Branislav Kontur <[email protected]>
Co-authored-by: command-bot <>

## Summary

This pull request proposes a solution for improved control of the
versioned XCM flow over the bridge (across different consensus chains)
and resolves the situation where the sending chain/consensus has already
migrated to a higher XCM version than the receiving chain/consensus.

## Problem/Motivation

The current flow over the bridge involves a transfer from AssetHubRococo
(AHR) to BridgeHubRococo (BHR) to BridgeHubWestend (BHW) and finally to
AssetHubWestend (AHW), beginning with a reserve-backed transfer on AHR.

In this process:
1. AHR sends XCM `ExportMessage` through `XcmpQueue`, incorporating XCM
version checks using the `WrapVersion` feature, influenced by
`pallet_xcm::SupportedVersion` (managed by
`pallet_xcm::force_xcm_version` or version discovery).

2. BHR handles the `ExportMessage` instruction, utilizing the latest XCM
version. The `HaulBlobExporter` converts the inner XCM to
[`VersionedXcm::from`](https://github.com/paritytech/polkadot-sdk/blob/63ac2471/polkadot/xcm/xcm-builder/src/universal_exports.rs#L465-L467),
also using the latest XCM version.

However, challenges arise:
- Incompatibility when BHW uses a different version than BHR. For
instance, if BHR migrates to **XCMv4** while BHW remains on **XCMv3**,
BHR's `VersionedXcm::from` uses `VersionedXcm::V4` variant, causing
encoding issues for BHW.
  ```
	/// Just a simulation of possible error, which could happen on BHW
	/// (this code is based on actual master without XCMv4)
	let encoded = hex_literal::hex!("0400");
	println!("{:?}", VersionedXcm::<()>::decode(&mut &encoded[..]));

Err(Error { cause: None, desc: "Could not decode `VersionedXcm`, variant
doesn't exist" })
  ``` 
- Similar compatibility issues exist between AHR and AHW.

## Solution

This pull request introduces the following solutions:

1. **New trait `CheckVersion`** - added to the `xcm` module and exposing
`pallet_xcm::SupportedVersion`. This enhancement allows checking the
actual XCM version for desired destinations outside of the `pallet_xcm`
module.

2. **Version Check in `HaulBlobExporter`** uses `CheckVersion` to check
known/configured destination versions, ensuring compatibility. For
example, in the scenario mentioned, BHR can store the version `3` for
BHW. If BHR is on XCMv4, it will attempt to downgrade the message to
version `3` instead of using the latest version `4`.

3. **Version Check in `pallet-xcm-bridge-hub-router`** - this check
ensures compatibility with the real destination's XCM version,
preventing the unnecessary sending of messages to the local bridge hub
if versions are incompatible.

These additions aim to improve the control and compatibility of XCM
flows over the bridge and addressing issues related to version
mismatches.

## Possible alternative solution

_(More investigation is needed, and at the very least, it should extend
to XCMv4/5. If this proves to be a viable option, I can open an RFC for
XCM.)._

Add the `XcmVersion` attribute to the `ExportMessage` so that the
sending chain can determine, based on what is stored in
`pallet_xcm::SupportedVersion`, the version the destination is using.
This way, we may not need to handle the version in `HaulBlobExporter`.

```
ExportMessage {
	network: NetworkId,
	destination: InteriorMultiLocation,
	xcm: Xcm<()>
	destination_xcm_version: Version, // <- new attritbute
},
```

```
pub trait ExportXcm {
        fn validate(
		network: NetworkId,
		channel: u32,
		universal_source: &mut Option<InteriorMultiLocation>,
		destination: &mut Option<InteriorMultiLocation>,
		message: &mut Option<Xcm<()>>,
                destination_xcm_version: Version, , // <- new attritbute
	) -> SendResult<Self::Ticket>;
```

## Future Directions

This PR does not fix version discovery over bridge, further
investigation will be conducted here:
https://github.com/paritytech/polkadot-sdk/issues/2417.

## TODO

- [x] `pallet_xcm` mock for tests uses hard-coded XCM version `2` -
change to 3 or lastest?
- [x] fix `pallet-xcm-bridge-hub-router`
- [x] fix HaulBlobExporter with version determination
[here](https://github.com/paritytech/polkadot-sdk/blob/2183669d/polkadot/xcm/xcm-builder/src/universal_exports.rs#L465)
- [x] add unit-tests to the runtimes
- [x] run benchmarks for `ExportMessage`
- [x] extend local run scripts about `force_xcm_version(dest, version)`
- [ ] when merged, prepare governance calls for Rococo/Westend
- [ ] add PRDoc

Part of: https://github.com/paritytech/parity-bridges-common/issues/2719

---------

Co-authored-by: command-bot <>

This PR introduces a script and some templates to use the prdoc involved
in a release and build:
- the changelog
- a simple draft of audience documentation

Since the prdoc presence was enforced in the middle of the version
1.5.0, not all PRs did come with a `prdoc` file.
This PR creates all the missing `prdoc` files with some minimum content
allowing to properly generate the changelog.
The generated content is **not** suitable for the audience
documentation.

The audience documentation will be possible with the next version, when
all PR come with a proper `prdoc`.

## Assumptions

- the prdoc files for release `vX.Y.Z` have been moved under
`prdoc/X.Y.Z`
- the changelog requires for now for the prdoc files to contain author +
topic. Thos fields are optional.

The build script can  be called as:
```
VERSION=X.Y.Z ./scripts/release/build-changelogs.sh
```

Related:
-  #1408

---------

Co-authored-by: EgorPopelyaev <[email protected]>

A brief explanation of the Deprecation Checklist is added to the
Contributing notes with a link to it

Bumps [names](https://github.com/fnichol/names) from 0.13.0 to 0.14.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/fnichol/names/releases">names's
releases</a>.</em></p>
<blockquote>
<h2>Release 0.14.0</h2>
<h2><a
href="https://github.com/fnichol/names/compare/v0.13.0...v0.14.0">0.14.0</a>
- 2022-06-28</h2>
<h3>Changed</h3>
<ul>
<li>upgrade to <code>regex</code> 1.5.6</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/fnichol/names/blob/main/CHANGELOG.md">names's
changelog</a>.</em></p>
<blockquote>
<h2>[0.14.0] - 2022-06-28</h2>
<h3>Changed</h3>
<ul>
<li>upgrade to <code>regex</code> 1.5.6</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/fnichol/names/commit/8f09d5bf9860582c485b5856cbb325642d3e82c2"><code>8f09d5b</code></a>
release: names 0.14.0</li>
<li><a
href="https://github.com/fnichol/names/commit/b589b911b489812aa4a279efa1b91e6fe7ff7dfa"><code>b589b91</code></a>
release: update CHANGELOG.md</li>
<li><a
href="https://github.com/fnichol/names/commit/e1bed3056d38a98a22f28f39db42211404a00953"><code>e1bed30</code></a>
merge: <a
href="https://redirect.github.com/fnichol/names/issues/20">#20</a></li>
<li><a
href="https://github.com/fnichol/names/commit/12eb753220007a2aafe741031af83562c1e617f6"><code>12eb753</code></a>
Bump regex from 1.5.4 to 1.5.6</li>
<li><a
href="https://github.com/fnichol/names/commit/ed520b76b8542fdca09d9d80658f4ea0b8914464"><code>ed520b7</code></a>
merge: <a
href="https://redirect.github.com/fnichol/names/issues/19">#19</a></li>
<li><a
href="https://github.com/fnichol/names/commit/852eaee067bcadfb2a59e78b432919a87983fe6d"><code>852eaee</code></a>
chore: start next iteration 0.13.1-dev</li>
<li>See full diff in <a
href="https://github.com/fnichol/names/compare/v0.13.0...v0.14.0">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=names&package-manager=cargo&previous-version=0.13.0&new-version=0.14.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Upgrade to [srtool-actions
v0.9.1](https://github.com/chevdor/srtool-actions/releases/tag/v0.9.1)
to fix issue introduced in
https://github.com/paritytech/polkadot-sdk/pull/2217

Partially Addresses #2500

Adds a `deprecate_controller_batch` call to the staking pallet that is
callable by `Root` and `StakingAdmin`. To be used for controller account
deprecation and removed thereafter. Adds
`MaxControllersDeprecationBatch` pallet constant that defines max
possible deprecations per call.

- [x] Add `deprecate_controller_batch` call, and
`MaxControllersInDeprecationBatch` constant.
- [x] Add tests, benchmark, weights. Tests that weight is only consumed
if unique pair.
- [x] Adds `StakingAdmin` origin to staking's `AdminOrigin` type in
westend runtime.
- [x] Determined that worst case 5,900 deprecations does fit into
`maxBlock` `proofSize` and `refTime` in both normal and operational
thresholds, meaning we can deprecate all controllers for each network in
one call.

## Block Weights

By querying `consts.system.blockWeights` we can see that the
`deprecate_controller_batch` weights fit within the `normal` threshold
on Polkadot.

#### `controller_deprecation_batch` where i = 5900:
#### Ref time: 69,933,325,300
#### Proof size: 21,040,390

### Polkadot 

```
// consts.query.blockWeights

maxBlock: {
        refTime: 2,000,000,000,000
        proofSize: 18,446,744,073,709,551,615
}
normal: {
 maxExtrinsic: {
	refTime: 1,479,873,955,000
	proofSize: 13,650,590,614,545,068,195
 }
 maxTotal: {
	refTime: 1,500,000,000,000
	proofSize: 13,835,058,055,282,163,711
 }
}
```

### Kusama

```
// consts.query.blockWeights

  maxBlock: {
    refTime: 2,000,000,000,000
    proofSize: 18,446,744,073,709,551,615
  }
    normal: {
      maxExtrinsic: {
        refTime: 1,479,875,294,000
        proofSize: 13,650,590,614,545,068,195
      }
      maxTotal: {
        refTime: 1,500,000,000,000
        proofSize: 13,835,058,055,282,163,711
      }
}
```

---------

Co-authored-by: command-bot <>
Co-authored-by: Gonçalo Pestana <[email protected]>

This PR makes the block number provider configurable through the Config
trait in pallet-vesting, this gives parachains the option to use the
relay chain block number provider from ParachainSystem.

---------

Co-authored-by: Bastian Köcher <[email protected]>

Co-authored-by: Bastian Köcher <[email protected]>

Bumps the known_good_semver group with 2 updates:
[clap](https://github.com/clap-rs/clap) and
[syn](https://github.com/dtolnay/syn).

Updates `clap` from 4.4.10 to 4.4.11
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/releases">clap's
releases</a>.</em></p>
<blockquote>
<h2>v4.4.11</h2>
<h2>[4.4.11] - 2023-12-04</h2>
<h3>Features</h3>
<ul>
<li>Add <code>Command::mut_group</code></li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's
changelog</a>.</em></p>
<blockquote>
<h2>[4.4.11] - 2023-12-04</h2>
<h3>Features</h3>
<ul>
<li>Add <code>Command::mut_group</code></li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/clap-rs/clap/commit/d092896d61fd73a5467db85eac035a9ce2ddbc60"><code>d092896</code></a>
chore: Release</li>
<li><a
href="https://github.com/clap-rs/clap/commit/c76a713f8bd40a54a58e8c1d2300a6792f1b79d5"><code>c76a713</code></a>
chore: Update lockfile</li>
<li><a
href="https://github.com/clap-rs/clap/commit/b99d17bb0b78b667659982252e8973174e93ae7d"><code>b99d17b</code></a>
docs: Update changelog</li>
<li><a
href="https://github.com/clap-rs/clap/commit/b47f8da4d857dd653915ce772757d4b996a36477"><code>b47f8da</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5247">#5247</a>
from epage/group</li>
<li><a
href="https://github.com/clap-rs/clap/commit/2e7c9d11a84b5008e2b42b4df323557a31bb0337"><code>2e7c9d1</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/5194">#5194</a>
from c19/patch-1</li>
<li><a
href="https://github.com/clap-rs/clap/commit/37917be0b75d5cd667cd37db6ea5c6bac837c674"><code>37917be</code></a>
feat: Add Command::mut_group</li>
<li><a
href="https://github.com/clap-rs/clap/commit/cf7a0272cc1d55d139983d4408e8bedab51338ad"><code>cf7a027</code></a>
chore: Update from '_rust/main'</li>
<li><a
href="https://github.com/clap-rs/clap/commit/8c836eaa9d9279df467991a3b8463d748b515a0a"><code>8c836ea</code></a>
Merge pull request <a
href="https://redirect.github.com/clap-rs/clap/issues/10">#10</a> from
epage/renovate/migrate-config</li>
<li><a
href="https://github.com/clap-rs/clap/commit/598c6244983fb392457f3fbec9badf25fab6d051"><code>598c624</code></a>
chore(config): migrate config .github/renovate.json5</li>
<li>See full diff in <a
href="https://github.com/clap-rs/clap/compare/v4.4.10...v4.4.11">compare
view</a></li>
</ul>
</details>
<br />

Updates `syn` from 2.0.39 to 2.0.40
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/dtolnay/syn/releases">syn's
releases</a>.</em></p>
<blockquote>
<h2>2.0.40</h2>
<ul>
<li>Fix some edge cases of handling None-delimited groups in expression
parser (<a
href="https://redirect.github.com/dtolnay/syn/issues/1539">#1539</a>, <a
href="https://redirect.github.com/dtolnay/syn/issues/1541">#1541</a>, <a
href="https://redirect.github.com/dtolnay/syn/issues/1542">#1542</a>, <a
href="https://redirect.github.com/dtolnay/syn/issues/1543">#1543</a>, <a
href="https://redirect.github.com/dtolnay/syn/issues/1544">#1544</a>, <a
href="https://redirect.github.com/dtolnay/syn/issues/1545">#1545</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/dtolnay/syn/commit/cf7f40a96a7329fb4215a7a1d8d9e7c93439b169"><code>cf7f40a</code></a>
Release 2.0.40</li>
<li><a
href="https://github.com/dtolnay/syn/commit/1ce8ccf5cd92824d1058019c0ae95b0616f6ac01"><code>1ce8ccf</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1538">#1538</a>
from dtolnay/testinvisible</li>
<li><a
href="https://github.com/dtolnay/syn/commit/d06bff8883e794c0d9d5fe2998210dec113b6eff"><code>d06bff8</code></a>
Add test for parsing Delimiter::None in expressions</li>
<li><a
href="https://github.com/dtolnay/syn/commit/9ec66d42bba0da0041ab6448604b72f673e185f1"><code>9ec66d4</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1545">#1545</a>
from dtolnay/groupedlet</li>
<li><a
href="https://github.com/dtolnay/syn/commit/384621acc640779ee4a8250317c26a42e8ceef90"><code>384621a</code></a>
Fix None-delimited let expression in stmt position</li>
<li><a
href="https://github.com/dtolnay/syn/commit/5325b6d1711c1c9c6787cb6239b472b5f8b5daaf"><code>5325b6d</code></a>
Add test of let expr surrounded in None-delimited group</li>
<li><a
href="https://github.com/dtolnay/syn/commit/0ddfc27cf79573db0b5533c583ff895e9c7f3f72"><code>0ddfc27</code></a>
Merge pull request <a
href="https://redirect.github.com/dtolnay/syn/issues/1544">#1544</a>
from dtolnay/nonedelimloop</li>
<li><a
href="https://github.com/dtolnay/syn/commit/9c99b3f62ecebb2ac22f8ed99039934b0a18d0e6"><code>9c99b3f</code></a>
Fix stmt boundary after None-delimited group containing loop</li>
<li><a
href="https://github.com/dtolnay/syn/commit/2781584ea868cce6c9ae750bc442e3b4b2dfd887"><code>2781584</code></a>
Add test of None-delimited group containing loop in match arm</li>
<li><a
href="https://github.com/dtolnay/syn/commit/d33292808432c8530b53c951f2780d7128c4bd0b"><code>d332928</code></a>
Simplify token stream construction in Delimiter::None tests</li>
<li>Additional commits viewable in <a
href="https://github.com/dtolnay/syn/compare/2.0.39...2.0.40">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

The `lazy_static` package does not work well in `no-std`: it requires
`spin_no_std` feature, which also will propagate into `std` if enabled.
This is not what we want.

This PR removes public/private key hash-maps and replaces them with
simple static byte arrays.

`&T` versions of `AsRef/Deref/From` traits implementation were removed.

Little const helper for converting hex strings into array during compile
time was also added. (somewhat similar to _hex_literal_).

---------

Co-authored-by: command-bot <>
Co-authored-by: Koute <[email protected]>

Bumps [num-traits](https://github.com/rust-num/num-traits) from 0.2.16
to 0.2.17.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/rust-num/num-traits/blob/master/RELEASES.md">num-traits's
changelog</a>.</em></p>
<blockquote>
<h1>Release 0.2.17 (2023-10-07)</h1>
<ul>
<li><a
href="https://redirect.github.com/rust-num/num-traits/pull/286">Fix a
doc warning about custom classes with newer rustdoc.</a></li>
</ul>
<p><strong>Contributors</strong>: <a
href="https://github.com/robamu"><code>@​robamu</code></a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/rust-num/num-traits/commit/0a27d8c95ad4cdf1b04793cc3b19520f2f19c4f4"><code>0a27d8c</code></a>
Merge <a
href="https://redirect.github.com/rust-num/num-traits/issues/289">#289</a></li>
<li><a
href="https://github.com/rust-num/num-traits/commit/34e309a918d2c412949cba9c8869a46470fcde4f"><code>34e309a</code></a>
Release 0.2.17</li>
<li><a
href="https://github.com/rust-num/num-traits/commit/ef36d69f7c98cce52177f77de5d092da0c93cdcc"><code>ef36d69</code></a>
Merge <a
href="https://redirect.github.com/rust-num/num-traits/issues/286">#286</a></li>
<li><a
href="https://github.com/rust-num/num-traits/commit/d9d94f8a510d64cb56f70036777ad739e5e5e961"><code>d9d94f8</code></a>
Bugfix for text codeblock in documentation.</li>
<li>See full diff in <a
href="https://github.com/rust-num/num-traits/compare/num-traits-0.2.16...num-traits-0.2.17">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=num-traits&package-manager=cargo&previous-version=0.2.16&new-version=0.2.17)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Scaffold everything, so that we can enable v2 assignments via a node
feature bit, once all nodes have upgraded to the new protocol.

Implements: https://github.com/paritytech/polkadot-sdk/issues/628

---------

Signed-off-by: Alexandru Gheorghe <[email protected]>

For some reason original PR passed CI - when it shouldn't have. Fix
`pallet-xcm` test benchmarks.

The test frame ui started failing consistently on latest master [1]. I
assume it was because of a race between
https://github.com/paritytech/polkadot-sdk/pull/1343 which introduced
this warning and a PR that updated our tooling version, hence the
warnings don't match perfectly, so regenerated them with
`TRYBUILD=overwrite` as the test suggests.

[1] https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/4666766

---------

Signed-off-by: Alexandru Gheorghe <[email protected]>

Treasury Pallet Instance for the Fellowship in Westend Collectives.

In this update, we present a Treasury Pallet Instance that is under the
control of the Fellowship body, with oversight from the Root and
Treasurer origins. Here's how it is governed:
- the Root origin have the authority to reject or approve spend
proposals, with no amount limit for approvals.
- the Treasurer origin have the authority to reject or approve spend
proposals, with approval limits of up to 10,000,000 DOT.
- Voice of all Fellows ranked at 3 or above can reject or approve spend
proposals, with a maximum approval limit of 10,000 DOT.
- Voice of Fellows ranked at 4 or above can also reject or approve spend
proposals, with a maximum approval limit of 10,000,000 DOT.

Additionally, we introduce the Asset Rate Pallet Instance to establish
conversion rates from asset A to B. This is used to determine if a
proposed spend amount involving a non-native asset is permissible by the
commanding origin. The rates can be set up by the Root, Treasurer
origins, or Voice of all Fellows.

---------

Co-authored-by: joe petrowski <[email protected]>
Co-authored-by: joepetrowski <[email protected]>

Closes #2293 

if the max_supply is set during the collection creation, we emit the
`CollectionMaxSupplySet` event

As per title.

Fix in ark-scale `TypeInfo` implementation

`polkadot-sdk` version of original tasks PR located here:
https://github.com/paritytech/substrate/pull/14329

Fixes #206

## Status
- [x] Generic `Task` trait
- [x] `RuntimeTask` aggregated enum, compatible with
`construct_runtime!`
- [x] Casting between `Task` and `RuntimeTask` without needing `dyn` or
`Box`
- [x] Tasks Example pallet
- [x] Runtime tests for Tasks example pallet
- [x] Parsing for task-related macros
- [x] Retrofit parsing to make macros optional
- [x] Expansion for task-related macros
- [x] Adds support for args in tasks
- [x] Retrofit tasks example pallet to use macros instead of manual
syntax
- [x] Weights
- [x] Cleanup
- [x] UI tests
- [x] Docs

## Target Syntax
Adapted from
https://github.com/paritytech/polkadot-sdk/issues/206#issue-1865172283

```rust
// NOTE: this enum is optional and is auto-generated by the other macros if not present
#[pallet::task]
pub enum Task<T: Config> {
    AddNumberIntoTotal {
        i: u32,
    }
}

/// Some running total.
#[pallet::storage]
pub(super) type Total<T: Config<I>, I: 'static = ()> =
StorageValue<_, (u32, u32), ValueQuery>;

/// Numbers to be added into the total.
#[pallet::storage]
pub(super) type Numbers<T: Config<I>, I: 'static = ()> =
StorageMap<_, Twox64Concat, u32, u32, OptionQuery>;

#[pallet::tasks_experimental]
impl<T: Config<I>, I: 'static> Pallet<T, I> {
	/// Add a pair of numbers into the totals and remove them.
	#[pallet::task_list(Numbers::<T, I>::iter_keys())]
	#[pallet::task_condition(|i| Numbers::<T, I>::contains_key(i))]
	#[pallet::task_index(0)]
	pub fn add_number_into_total(i: u32) -> DispatchResult {
		let v = Numbers::<T, I>::take(i).ok_or(Error::<T, I>::NotFound)?;
		Total::<T, I>::mutate(|(total_keys, total_values)| {
			*total_keys += i;
			*total_values += v;
		});
		Ok(())
	}
}
```

---------

Co-authored-by: Nikhil Gupta <[email protected]>
Co-authored-by: kianenigma <[email protected]>
Co-authored-by: Nikhil Gupta <>
Co-authored-by: Gavin Wood <[email protected]>
Co-authored-by: Oliver Tale-Yazdi <[email protected]>
Co-authored-by: gupnik <[email protected]>

Using hashmap instead (hashset do not expose entry), to get the default
random hasher her.