- Jan 31, 2024
-
-
Branislav Kontur authored
[frame] `#[pallet::composite_enum]` improved variant count handling + removed `pallet_balances`'s `MaxHolds` config (#2657) I started this investigation/issue based on @liamaharon question [here](https://github.com/paritytech/polkadot-sdk/pull/1801#discussion_r1410452499). ## Problem The `pallet_balances` integrity test should correctly detect that the runtime has correct distinct `HoldReasons` variant count. I assume the same situation exists for RuntimeFreezeReason. It is not a critical problem, if we set `MaxHolds` with a sufficiently large value, everything should be ok. However, in this case, the integrity_test check becomes less useful. **Situation for "any" runtime:** - `HoldReason` enums from different pallets: ```rust /// from pallet_nis #[pallet::composite_enum] pub enum HoldReason { NftReceipt, } /// from pallet_preimage #[pallet::composite_enum] pub enum HoldReason { Preimage, } // from pallet_state-trie-migration #[pallet::composite_enum] pub enum HoldReason { SlashForContinueMigrate, SlashForMigrateCustomTop, SlashForMigrateCustomChild, } ``` - generated `RuntimeHoldReason` enum looks like: ```rust pub enum RuntimeHoldReason { #[codec(index = 32u8)] Preimage(pallet_preimage::HoldReason), #[codec(index = 38u8)] Nis(pallet_nis::HoldReason), #[codec(index = 42u8)] StateTrieMigration(pallet_state_trie_migration::HoldReason), } ``` - composite enum `RuntimeHoldReason` variant count is detected as `3` - we set `type MaxHolds = ConstU32<3>` - `pallet_balances::integrity_test` is ok with `3`(at least 3) However, the real problem can occur in a live runtime where some functionality might stop working. This is due to a total of 5 distinct hold reasons (for pallets with multi-instance support, it is even more), and not all of them can be used because of an incorrect `MaxHolds`, which is deemed acceptable according to the `integrity_test`: ``` // pseudo-code - if we try to call all of these: T::Currency::hold(&pallet_nis::HoldReason::NftReceipt.into(), &nft_owner, deposit)?; T::Currency::hold(&pallet_preimage::HoldReason::Preimage.into(), &nft_owner, deposit)?; T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForContinueMigrate.into(), &nft_owner, deposit)?; // With `type MaxHolds = ConstU32<3>` these two will fail T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomTop.into(), &nft_owner, deposit)?; T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomChild.into(), &nft_owner, deposit)?; ``` ## Solutions A macro `#[pallet::*]` expansion is extended of `VariantCount` implementation for the `#[pallet::composite_enum]` enum type. This expansion generates the `VariantCount` implementation for pallets' `HoldReason`, `FreezeReason`, `LockId`, and `SlashReason`. Enum variants must be plain enum values without fields to ensure a deterministic count. The composite runtime enum, `RuntimeHoldReason` and `RuntimeFreezeReason`, now sets `VariantCount::VARIANT_COUNT` as the sum of pallets' enum `VariantCount::VARIANT_COUNT`: ```rust #[frame_support::pallet(dev_mode)] mod module_single_instance { #[pallet::composite_enum] pub enum HoldReason { ModuleSingleInstanceReason1, ModuleSingleInstanceReason2, } ... } #[frame_support::pallet(dev_mode)] mod module_multi_instance { #[pallet::composite_enum] pub enum HoldReason<I: 'static = ()> { ModuleMultiInstanceReason1, ModuleMultiInstanceReason2, ModuleMultiInstanceReason3, } ... } impl self::sp_api_hidden_includes_construct_runtime::hidden_include::traits::VariantCount for RuntimeHoldReason { const VARIANT_COUNT: u32 = 0 + module_single_instance::HoldReason::VARIANT_COUNT + module_multi_instance::HoldReason::<module_multi_instance::Instance1>::VARIANT_COUNT + module_multi_instance::HoldReason::<module_multi_instance::Instance2>::VARIANT_COUNT + module_multi_instance::HoldReason::<module_multi_instance::Instance3>::VARIANT_COUNT; } ``` In addition, `MaxHolds` is removed (as suggested [here](https://github.com/paritytech/polkadot-sdk/pull/2657#discussion_r1443324573)) from `pallet_balances`, and its `Holds` are now bounded to `RuntimeHoldReason::VARIANT_COUNT`. Therefore, there is no need to let the runtime specify `MaxHolds`. ## For reviewers Relevant changes can be found here: - `substrate/frame/support/procedural/src/lib.rs` - `substrate/frame/support/procedural/src/pallet/parse/composite.rs` - `substrate/frame/support/procedural/src/pallet/expand/composite.rs` - `substrate/frame/support/procedural/src/construct_runtime/expand/composite_helper.rs` - `substrate/frame/support/procedural/src/construct_runtime/expand/hold_reason.rs` - `substrate/frame/support/procedural/src/construct_runtime/expand/freeze_reason.rs` - `substrate/frame/support/src/traits/misc.rs` And the rest of the files is just about removed `MaxHolds` from `pallet_balances` ## Next steps Do the same for `MaxFreezes` https://github.com/paritytech/polkadot-sdk/issues/2997. --------- Co-authored-by: command-bot <> Co-authored-by:
Bastian Köcher <[email protected]> Co-authored-by:
Dónal Murray <[email protected]> Co-authored-by:
gupnik <[email protected]>
-
- Jan 24, 2024
-
-
Just van Stam authored
Moved from: https://github.com/paritytech/polkadot/pull/6951 closes https://github.com/paritytech/polkadot-sdk/issues/490 - [x] update cumulus --- This PR introduces transactional processing of certain xcm instructions. For the list of instructions checkout https://github.com/paritytech/polkadot-sdk/issues/490. The transactional processing is implemented as an xcm-executor config item. The two implementations in this PR are `FrameTransactionalProcessor` and `()`. The `()` implementation does no transactional processing. Each implementation of the `ProcessTransaction` trait has an `IS_TRANSACTIONAL` const that tells the XCVM if transactional processing is actually implemented. If Transactional processing is implemented, changes to touched registers should also be rolled back to prevent inconsistencies. Note for reviewers: Check out the following safety assumption: https://github.com/paritytech/polkadot-sdk/pull/1222/files#diff-4effad7d8c1c9de19fd27e18661cbf2128c8718f3b2420a27d2f816e0749ea53R30 --------- Co-authored-by:
Keith Yeung <[email protected]> Co-authored-by:
Francisco Aguirre <[email protected]> Co-authored-by: command-bot <>
-
- Jan 22, 2024
-
-
joe petrowski authored
Clean up all the old syntax. --------- Co-authored-by: command-bot <> Co-authored-by:
Nikhil Gupta <[email protected]> Co-authored-by:
Maksym H <[email protected]>
-
- Jan 16, 2024
-
-
Francisco Aguirre authored
# Note for reviewer Most changes are just syntax changes necessary for the new version. Most important files should be the ones under the `xcm` folder. # Description Added XCMv4. ## Removed `Multi` prefix The following types have been renamed: - MultiLocation -> Location - MultiAsset -> Asset - MultiAssets -> Assets - InteriorMultiLocation -> InteriorLocation - MultiAssetFilter -> AssetFilter - VersionedMultiAsset -> VersionedAsset - WildMultiAsset -> WildAsset - VersionedMultiLocation -> VersionedLocation In order to fix a name conflict, the `Assets` in `xcm-executor` were renamed to `HoldingAssets`, as they represent assets in holding. ## Removed `Abstract` asset id It was not being used anywhere and this simplifies the code. Now assets are just constructed as follows: ```rust let asset: Asset = (AssetId(Location::new(1, Here)), 100u128).into(); ``` No need for specifying `Concrete` anymore. ## Outcome is now a named fields struct Instead of ```rust pub enum Outcome { Complete(Weight), Incomplete(Weight, Error), Error(Error), } ``` we now have ```rust pub enum Outcome { Complete { used: Weight }, Incomplete { used: Weight, error: Error }, Error { error: Error }, } ``` ## Added Reanchorable trait Now both locations and assets implement this trait, making it easier to reanchor both. ## New syntax for building locations and junctions Now junctions are built using the following methods: ```rust let location = Location { parents: 1, interior: [Parachain(1000), PalletInstance(50), GeneralIndex(1984)].into() }; ``` or ```rust let location = Location::new(1, [Parachain(1000), PalletInstance(50), GeneralIndex(1984)]); ``` And they are matched like so: ```rust match location.unpack() { (1, [Parachain(id)]) => ... (0, Here) => ..., (1, [_]) => ..., } ``` This syntax is mandatory in v4, and has been also implemented for v2 and v3 for easier migration. This was needed to make all sizes smaller. # TODO - [x] Scaffold v4 - [x] Port github.com/paritytech/polkadot/pull/7236 - [x] Remove `Multi` prefix - [x] Remove `Abstract` asset id --------- Co-authored-by: command-bot <> Co-authored-by:
-
- Dec 20, 2023
-
-
Dónal Murray authored
Many clippy lints usually enforced by `-Dcomplexity` and `-Dcorrectness` are not caught by CI as they are gated by `features`, like `runtime-benchmarks`, while the clippy CI job runs with only the default features for all targets. This PR also adds a CI step to run clippy with `--all-features` to ensure the code quality is maintained behind feature gates from now on. To improve local development, clippy lints are downgraded to warnings, but they still will result in an error at CI due to the `-Dwarnings` rustflag. --------- Co-authored-by:Liam Aharon <[email protected]>
-
- Dec 14, 2023
-
-
Francisco Aguirre authored
In the move from the old `Currency` traits to the new `fungible/s` family of traits, we already had the `FungiblesAdapter` and `NonFungiblesAdapter` for multiple fungible and non fungible assets respectively. However, for handling only one fungible asset, we were missing a `FungibleAdapter`, and so used the old `CurrencyAdapter` instead. This PR aims to fill in that gap, and provide the new adapter for more updated examples. I marked the old `CurrencyAdapter` as deprecated as part of this PR, and I'll change it to the new `FungibleAdapter` in a following PR. The two stages are separated so as to not bloat this PR with some name fixes in tests. --------- Co-authored-by: command-bot <>
-
- Nov 28, 2023
-
-
gupnik authored
Step in https://github.com/paritytech/polkadot-sdk/issues/171 This PR adds `derive_impl` on all `frame_system` config impls for mock runtimes. The overridden configs are maintained as of now to ensure minimal changes. --------- Co-authored-by:Oliver Tale-Yazdi <[email protected]>
-
- Nov 13, 2023
-
-
Adrian Catangiu authored
## Motivation `pallet-xcm` is the main user-facing interface for XCM functionality, including assets manipulation functions like `teleportAssets()` and `reserve_transfer_assets()` calls. While `teleportAsset()` works both ways, `reserve_transfer_assets()` works only for sending reserve-based assets to a remote destination and beneficiary when the reserve is the _local chain_. ## Solution This PR enhances `pallet_xcm::(limited_)reserve_withdraw_assets` to support transfers when reserves are other chains. This will allow complete, **bi-directional** reserve-based asset transfers user stories using `pallet-xcm`. Enables following scenarios: - transferring assets with local reserve (was previously supported iff asset used as fee also had local reserve - now it works in all cases), - transferring assets with reserve on destination, - transferring assets with reserve on remote/third-party chain (iff assets and fees have same remote reserve), - transferring assets with reserve different than the reserve of the asset to be used as fees - meaning can be used to transfer random asset with local/dest reserve while using DOT for fees on all involved chains, even if DOT local/dest reserve doesn't match asset reserve, - transferring assets with any type of local/dest reserve while using fees which can be teleported between involved chains. All of the above is done by pallet inner logic without the user having to specify which scenario/reserves/teleports/etc. The correct scenario and corresponding XCM programs are identified, and respectively, built automatically based on runtime configuration of trusted teleporters and trusted reserves. #### Current limitations: - while `fees` and "non-fee" `assets` CAN have different reserves (or fees CAN be teleported), the remaining "non-fee" `assets` CANNOT, among themselves, have different reserve locations (this is also implicitly enforced by `MAX_ASSETS_FOR_TRANSFER=2`, but this can be safely increased in the future). - `fees` and "non-fee" `assets` CANNOT have **different remote** reserves (this could also be supported in the future, but adds even more complexity while possibly not being worth it - we'll see what the future holds). Fixes https://github.com/paritytech/polkadot-sdk/issues/1584 Fixes https://github.com/paritytech/polkadot-sdk/issues/2055 --------- Co-authored-by:
Branislav Kontur <[email protected]>
-
- Oct 24, 2023
-
-
Kian Paimani authored
closes https://github.com/paritytech/polkadot-sdk/issues/1882 ## Breaking Changes This PR introduces a new item to `pallet_balances::Config`: ```diff trait Config { ++ type RuntimeFreezeReasons; } ``` This value is only used to check it against `type MaxFreeze`. A similar check has been added for `MaxHolds` against `RuntimeHoldReasons`, which is already given to `pallet_balances`. In all contexts, you should pass the real `RuntimeFreezeReasons` generated by `construct_runtime` to `type RuntimeFreezeReasons`. Passing `()` would also work, but it would imply that the runtime uses no freezes at all. --------- Signed-off-by:
-
- Aug 31, 2023
-
-
Bastian Köcher authored
* Rename `polkadot-parachain` to `polkadot-parachain-primitives` While doing this it also fixes some last `rustdoc` issues and fixes another Cargo warning related to `pallet-paged-list`. * Fix compilation * ".git/.scripts/commands/fmt/fmt.sh" * Fix XCM docs --------- Co-authored-by: command-bot <>
-
- Jul 14, 2023
-
-
juangirini authored* replace Index for Nonce * remove extra Nonce * update lockfile for {"substrate"} --------- Co-authored-by: parity-processbot <>
-
- Jul 13, 2023
-
-
gupnik authored
Moves `Block` to `frame_system` instead of `construct_runtime` and removes `Header` and `BlockNumber` (#7431) * Companion for substrate * Minor update * Formatting * Fixes for cumulus * Fixes tests in polkadot-runtime-parachains * Minor update * Removes unused import * Fixes tests in polkadot-runtime-common * Minor fix * Update roadmap/implementers-guide/src/runtime/configuration.md Co-authored-by:
ordian <[email protected]> * ".git/.scripts/commands/fmt/fmt.sh" * update lockfile for {"substrate"} --------- Co-authored-by:
-
- Jul 12, 2023
-
-
Michal Kucharczyk authored* GenesisBuild<T,I> deprecated. BuildGenesisConfig added * fmt * fixes * more fixes * more fixes * fixes * update lockfile for {"substrate"} * fix --------- Co-authored-by: parity-processbot <>
-
- Jun 05, 2023
-
-
Keith Yeung authored
* Implement AliasOrigin processing in XCVM * add builder types and first test * switch to more general builder types * clone target for RemovePrefixAccountId32 * change builder types * change AliasForeignAccountId32 and add test for AliasCase * add Aliasers type to xcm configs * add benchmark * benchmark fix * add benchmark function for runtimes * fix alias_origin result types * fix benchmark test * add runtime-benchmarks feature in pallet-xcm-benchmarks * fmt * remove AliasCase, add test and fmt * address feedback * ".git/.scripts/commands/bench/bench.sh" xcm kusama pallet_xcm_benchmarks::generic * ".git/.scripts/commands/bench/bench.sh" xcm westend pallet_xcm_benchmarks::generic * ".git/.scripts/commands/bench/bench.sh" xcm rococo pallet_xcm_benchmarks::generic * address feedback * lock * ".git/.scripts/commands/bench/bench.sh" xcm kusama pallet_xcm_benchmarks::generic * ".git/.scripts/commands/bench/bench.sh" xcm westend pallet_xcm_benchmarks::generic * ".git/.scripts/commands/bench/bench.sh" xcm rococo pallet_xcm_benchmarks::generic * change doc * fmt --------- Co-authored-by:
Just van Stam <[email protected]> Co-authored-by:
Just van Stam <[email protected]> Co-authored-by: command-bot <>
-
Gavin Wood authored
* Introduce an extensible location-to-hash-account * Convert becomes RevFallRefConvert * Use ConvertLocation trait * Remove Convert usage * Builds * Fix warnings * Remove unused types * Bump lock * No need for aliasing * Remove unused * Deprecate legacy conversion * Fixes * Fixes * Update Cargo.toml Co-authored-by:
Muharem Ismailov <[email protected]> * Update xcm/xcm-builder/src/location_conversion.rs Co-authored-by:
-
- May 26, 2023
-
-
Francisco Aguirre authored
* XCM: Fix issue with RequestUnlock * Leave API changes for v4 * Fix clippy errors * Fix tests --------- Co-authored-by: parity-processbot <>
-
- May 24, 2023
-
-
Bastian Köcher authored
* Companion: Substrate#13869 https://github.com/paritytech/substrate/pull/13869 * update lockfile for {"substrate"} * ".git/.scripts/commands/fmt/fmt.sh" --------- Co-authored-by: parity-processbot <>
-
- May 05, 2023
-
-
Muharem Ismailov authored
* xcm remote lock consumers * update xcm pallet config setups * fix import * update xcm pallet config setups * rename consumers to users * rename * rename users to consumers, more docs * correct doc --------- Co-authored-by: parity-processbot <>
-
- Apr 08, 2023
-
-
s0me0ne-unkn0wn authored
* Happy New Year! * Remove year entierly Co-authored-by:
-
- Mar 23, 2023
-
-
Just van Stam authored
* Ensure for a configurable origin in XCM (#6442), cherry picked from 5ae05e1a957857c449a43d8759a21292d03fd049 Add new associated type, AdminOrigin, bounded by EnsureOrigin trait in XCM pallet. Replace ensure_root() with ensure_origin() from a EnsureOrigin trait. Set AdminOrigin as EnsureRoot<AccountId> in xcm configs. * cargo fmt * small stylistic change --------- Co-authored-by:serkul <[email protected]>
-
- Mar 20, 2023
-
-
Gavin Wood authored
* Some renames * Fix * Fix build for new APIs * Remove diener * Fixes * Fixes * Fix integration tests * Fixes * fix nis issuance * Update Cargo.toml * Polkadot doesn't have freezes/holds yet * No networks use freezes/holds * update lockfile for {"substrate"} * Fix tests There are more failing tests; just starting with the easy ones. Reserved balance does not count towards ED anymore, therefore reducing all the reserves by ED (1). Signed-off-by:
-
- Mar 13, 2023
-
-
Vivek Pandya authored
* Remove use of Store trait from runtime directory * Remove Store trait usage from xcm directory * Run cargo fmt * update lockfile for {"substrate"} --------- Co-authored-by: parity-processbot <>
-
- Mar 02, 2023
-
-
Oliver Tale-Yazdi authored* Migrate to from_parts Have a look at https://github.com/ggwpez/substrate-scripts/blob/master/migrate-from-parts.py Signed-off-by:
-
Branislav Kontur authored
* Change ParaId->Sibling for `SiblingParachainConvertsVia` * [XCM] Multiple `FungiblesAdapter`s support + `WeightTrader::buy_weight` more accurate error * Added test for `ConvertedConcreteId` with `AsPrefixedGeneralIndex` * Solution 3. - new MatchedConvertedConcreteId with matching capabilities * Review fixes * Renamed `AssetNotFound` -> `AssetNotHandled` --------- Co-authored-by: parity-processbot <>
-
- Feb 02, 2023
-
-
Adrian Catangiu authored
* testing new substrate refs * Fix bench Signed-off-by:
-
- Jan 17, 2023
-
-
Gavin Wood authored
* cargo fmt * Create benchmarks for XCM instructions introduced in v3 (#4564) * Create benchmarks for BurnAsset and ExpectAsset * Add benchmarks for ExpectOrigin and ExpectError * Add benchmarks for QueryPallet and ExpectPallet * Add benchmarks for ReportTransactStatus and ClearTransactStatus * cargo fmt * Use AllPalletsWithSystem in mocks * Update XCM generic benchmarks for westend * Remove default impls for some XCM weight functions * Fix compilation error * Add weight_args helper attribute * Remove manually written XcmWeightInfo * Parse trailing comma * Revert "Add weight_args helper attribute" This reverts commit 3b7c47a6182e1b9227036c38b406d494c3fcf6fd. * Fixes * Fixes * XCM v3: Introduce querier field into `QueryReponse` (#4732) * Introduce querier field into QueryReponse * Convert &Option<MultiLocation> to Option<&MultiLocation> &Option<T> is almost always never quite useful, most of the time it still gets converted to an Option<&T> via `as_ref`, so we should simply make functions that accept Option<&T> instead. * Fix tests * cargo fmt * Fix benchmarks * Appease spellchecker * Fix test * Fix tests * Fix test * Fix mock * Fixes * Fix tests * Add test for response queriers * Update xcm/pallet-xcm/src/lib.rs * Test for non-existence of querier Co-authored-by:
Bastian Köcher <[email protected]> * Make use of starts_with in match_and_split Co-authored-by:
Bastian Köcher <[email protected]> Co-authored-by:
Parity Bot <[email protected]> * Fixes * Fixes * Fixes * Fixes * Formatting * Fixes * Formatting * Fixes * Fixes * Formatting * Formatting * Remove horrible names * Bump * Remove InvertLocation trait (#5092) * Remove InvertLocation trait * Remove unneeded functions * Formatting * Fixes * Remove XCMv1 (#5094) * Remove XCMv1 * Remove XCMv1 * Formatting * Fixes * Fixes * Formatting * derive serialize/deserialize for xcm primitives (#5036) * derive serialize/deserialize for xcm primitives * derive serialize/deserialize for xcm primitives * update v3 * update v2 Co-authored-by:
Gav Wood <[email protected]> * Update lock * Fixes * Add benchmarks for the ExchangeAsset instruction * `AliasOrigin` instruction stub (#5122) * AliasOrigin instruction stub * Fixes * Fixes * Update substrate * Fixes * Ensure same array length before using copy_from_slice * Fixes * Add benchmarks for the UniversalOrigin instruction * Remove unused import * Remove unused import * Add benchmarks for SetFeesMode instruction * Add benchmarks for asset (un)locking instructions * Leave AliasOrigin unbenchmarked * Fixes after merge * cargo fmt * Fixes * Fixes * Set TrustedReserves to None on both Kusama and Westend * Remove extraneous reserve_asset_deposited benchmark * Fix universal_origin benchmark * cargo run --quiet --profile=production --features=runtime-benchmarks -- benchmark pallet --chain=westend-dev --steps=50 --repeat=20 --pallet=pallet_xcm_benchmarks::generic --extrinsic=* --execution=wasm --wasm-execution=compiled --heap-pages=4096 --header=./file_header.txt --template=./xcm/pallet-xcm-benchmarks/template.hbs --output=./runtime/westend/src/weights/xcm/pallet_xcm_benchmarks_generic.rs * Don't rely on skipped benchmark functions * Fixes * cargo run --quiet --profile=production --features=runtime-benchmarks -- benchmark pallet --chain=kusama-dev --steps=50 --repeat=20 --pallet=pallet_xcm_benchmarks::generic --extrinsic=* --execution=wasm --wasm-execution=compiled --heap-pages=4096 --header=./file_header.txt --template=./xcm/pallet-xcm-benchmarks/template.hbs --output=./runtime/kusama/src/weights/xcm/pallet_xcm_benchmarks_generic.rs * Fix unused variables * Fixes * Spelling * Fixes * Fix codec index of VersionedXcm * Allows to customize how calls are dispatched from XCM (#5657) * CallDispatcher trait * fmt * unused import * fix test-runtime * remove JustDispatch type * fix typo in test-runtime * missing CallDispatcher * more missing CallDispatcher * Update comment `NoteAssetLocked` -> `NoteUnlockable` * Fixes * Fixes * Adjust MultiAssets weights based on new wild card variants * Fixes * Fixes * Fixes * Fixes * Fixes * Some late fixes for XCMv3 (#5237) * Maximise chances that trapped assets can be reclaimed * Do origin check as part of ExportMessage for security * Formatting * Fixes * Cleanup export XCM APIs * Formatting * Update xcm/src/v3/junctions.rs * UnpaidExecution instruction and associated barrier. * Tighten barriers (ClearOrigin/QueryResponse) * Allow only 1 ClearOrigin instruction in AllowTopLevelPaidExecutionFrom * Bi-directional teleport accounting * Revert other fix * Build fixes] * Tests build * Benchmark fixes Co-authored-by:
asynchronous rob <[email protected]> * Add more weight tests * cargo fmt * Create thread_local in XCM executor to limit recursion depth (#6304) * Create thread_local in XCM executor to limit recursion depth * Add unit test for recursion limit * Fix statefulness in tests * Remove panic * Use defer and environmental macro * Fix the implementation * Use nicer interface * Change ThisNetwork to AnyNetwork * Move recursion check up to top level * cargo fmt * Update comment Co-authored-by:
Squirrel <[email protected]> * Use for Kusama * Use WithComputedOrigin for Polkadot, Rococo and Westend * Update lock * Fix warning * Update xcm/pallet-xcm/src/tests.rs Co-authored-by:
Alexander Popiak <[email protected]> Co-authored-by:
stanly-johnson <[email protected]> Co-authored-by:
nanocryk <[email protected]> Co-authored-by:
Vincent Geddes <[email protected]> Co-authored-by:
Shawn Tabrizi <[email protected]>
-
- Dec 08, 2022
-
-
Keith Yeung authored
* Replace WEIGHT_PER_* with WEIGHT_REF_TIME_PER_* * cargo fmt * Update substrate
-
- Sep 20, 2022
-
-
Sergej Sakac authored
* Rename Origin * fmt * fixes * more fixes * fix * more fixing * small fixes * last touches * update lockfile for {"substrate"} Co-authored-by:
-
- Sep 12, 2022
-
-
Sergej Sakac authored
* Companion for #11981 * more renaming * fmt * fixes * add generic type * Companion for #11831 * fix * revert changes * Delete rename-outer-enum.diff * revert * Update run_benches_for_runtime.sh * rename type Call & type Event * passing tests * fmt * small fixes * commit * fix * fmt * commit * error fixes * fix * small fix in test * Update lib.rs * Update lib.rs * Update lib.rs * Update lib.rs * Update lib.rs * Update lib.rs * Update lib.rs * remove RuntimeCall from pallet_grandpa * last fix * commit * rename * merge fix * update lockfile for {"substrate"} * cargo +nightly fmt * fix Co-authored-by: parity-processbot <> Co-authored-by:
-
- Sep 01, 2022
-
-
Shawn Tabrizi authored
* updates * remove new * fix up some stuff * fix cargo files * fix * fix template * update lockfile for {"substrate"} * Update block_weights.rs * remove unused * remove unused Co-authored-by: parity-processbot <>
-
- Aug 31, 2022
-
-
Shawn Tabrizi authored
* fix to latest substrate pr * update weights * cargo build -p polkadot-runtime-parachains * fix xcm-builder * fix import * fix a bunch * fix a bunch of weight stuff * kusama compile * unused * builds * maybe fix * cargo test -p polkadot-runtime-parachains * xcm simulator example * fix tests * xcm sim fuzz * fix runtime tests * remove unused * fix integration tests * scalar div * update lockfile for {"substrate"} Co-authored-by: parity-processbot <>
-
- Apr 04, 2022
-
-
Qinxuan Chen authored
* Comanion for substrate#11136 Signed-off-by:
koushiro <[email protected]> * revert changes in bridge Signed-off-by:
-
- Jan 21, 2022
-
-
Keith Yeung authored
* Refactor ParentIsDefault to ParentIsAllZeroes * Remove Default bound on all AccountId types under the xcm directory * Change to ParentIs<A: Get<AccountId>, AccountId> * Provide a better account for ParentIs * Fixes * Fixes * Fixes * Fixes * Update xcm/xcm-builder/src/currency_adapter.rs Co-authored-by:
-
- Jan 20, 2022
-
-
Oliver Tale-Yazdi authored
* Add `without_storage_info` The MaxEncodedLen trait is now enforced by default in Substrate. All pallets missing an implementation need to be marked with `without_storage_info` now. Signed-off-by:
-
- Dec 09, 2021
-
-
Gavin Wood authored
* MaxConsumers * Fixes * fixes * one more fix * Bump Substrate Co-authored-by:
-
- Sep 29, 2021
-
-
Keith Yeung authored
* Change send_xcm MultiLocation argument to be generic * Change pallet_xcm::send_xcm MultiLocation and Junctions argument to be generic * Change convert_origin MultiLocation argument to be generic * Change OnResponse MultiLocation arguments to be generic * Change UniversalWeigher MultiLocation argumente to be generic * Change ExecuteXcm MultiLocation argument to be generic * Remove usages of into for the MultiLocation argument in execute_xcm * Make use of generic MultiLocation arguments in rustdocs * Cargo fmt * Remove unused import in tests * Resolve conflicts * cargo fmt * Appease spellcheck * impl Into<MultiLocation> in more places
-
- Sep 02, 2021
-
-
Gavin Wood authored
* XCM: Automatic Version Negotiation * Introduce the version instructions and subscription trait * Notification and subscription data migration * Version change subscriptions * Fixes * Formatting * Spelling * Fixes * Fixes * Automatic unsubscription * Formatting * Expose remote origin in VM and ensure it is unchanged from actual origin in subscription instructions. * Barrier * Unsubscription extrinsic * Remove top_level param * Formatting * Fixes * Automatic subscription * Formatting * Spelling * Unit tests for XCM executor * Formatting * Spellin * Unit test for XCM pallet subscriber side * Formatting * More tests * Formatting * Fixes * Subscription-side tests * Formatting * Unit tests for XCM pallet * Formatting * Update roadmap/implementers-guide/src/types/overseer-protocol.md Co-authored-by:
-
- Aug 28, 2021
-
-
Gavin Wood authored
* XCM: Introduce AssetTrap * Revert reversions * Remove attempts at weighing and add test * Less storage use for asset trapping * Add missing file * Fixes * Fixes * Formatting * Fixes * Docs * Filter types to allow runtimes to dictate which assets/origins should be trapped * Formatting * Tests * Formatting * Fixes * Docs
-
- Aug 26, 2021
-
-
Gavin Wood authored
* Intoduce XCM v2 Also some minor fix for v0/v1 * Minor version cleanup * Minor version cleanup * Introduce SendError for XcmSend trait to avoid cycles with having Outcome in Xcm * comment * Corrent type * Docs * Fix build * Fixes * Introduce the basic impl * Docs * Add function * Basic implementation * Weighed responses and on_report * Make XCM more script-like * Remove BuyExecution::orders * Fixes * Fixes * Fixes * Formatting * Initial draft and make pallet-xcm build * fix XCM tests * Formatting * Fixes * Formatting * spelling * Fixes * Fixes * spelling * tests for translation * extra fields to XCM pallet * Formatting * Fixes * spelling * first integration test * Another integration test * Formatting * fix tests * all tests * Fixes * Fixes * Formatting * Fixes * Fixes * Formatting * Bump * Remove unneeded structuring * add instruction * Fixes * spelling * Fixes * Fixes * Formatting * Fixes * Fixes * Formatting * Introduce and use VersionedResponse * Introduce versioning to dispatchables' params * Fixes * Formatting * Rest of merge * more work * Formatting * Basic logic * Fixes * Fixes * Add test * Fixes * Formatting * Fixes * Fixes * Fixes * Nits * Simplify * Spelling * Formatting * Return weight of unexecuted instructions in case of error as surplus * Formatting * Fixes * Test for instruction count limiting * Formatting * Docs
-
- Aug 19, 2021
-
-
Shawn Tabrizi authored
* replace `()` filter with `Nothing` * import nothing * add nothing * update Substrate Co-authored-by: parity-processbot <>
-
